Date post: | 27-Jun-2015 |
Category: |
Technology |
Upload: | maxon-data-communications |
View: | 952 times |
Download: | 4 times |
Turn your Smartmax M2M HSPA Smart Modem Solution into a cost-effective mini RTU with the I/O Interface Controller. When used in conjunction with Maxon’s Smartmax Modem for data
telemetry, the I/O Interface Controller provides wide-ranging flexibility for system integrators and users for automating and controlling innumerable field applications.
Local or remote programming of the I/O Interface Controller can be done via the Smartmax’s built-in Web Interface. The fully featured web interface includes programming of the DNP3
settings and I/O status updates via SMS.
The SmartMax connects directly to the IO board via a ribbon connection, while the I/O controller can be wired to collect data automatically and connect directly to sensors, meters,
loggers or process equipment.
The Smartmax coupled with the I/O Interface Controller Board is the ultimate low cost data logging solution.
1709
08
TRANSFORM THE SMARTMAX INTO A POWERFUL COST-EFFECTIVE MINI REMOTE TERMINAL UNIT
Smartmax I/O Board Features• 6DigitalInputs(1configurableaspulseinput)
• 2AnalogueInputs
• 4DigitalOutputs
• 1PulseInput • DNP3/SMSSettingsconfigurableviawebpage inside Smartmax Modem.
• I/OBoardcontrollableviaDNP3,SMS,orusing inbuilt web page. • SDK(SoftwareDevelopmentKit)isavailableforthe Smartmax HSPA Modem (ProductCode:MA-2010)
* Not t
o scale
CHOOSE WELL... CHOOSE WISELY... CHOOSE MAXON...
M2M HSPA Smart Modem Solution - I/O Board: MA-4020
www.maxon.com.au
Metering
Water
Road Signs
Power
Security
Transport
M2M HSPA Smart Modem Solution - I/O Board: MA-4020
T | +612 8707 3000 ● F | +612 8707 3001 ● E | [email protected] ● 36A Gibson Avenue, Padstow NSW Australia 2211 ● www.maxon.com.au
Environmental Specifications• NormalOperationTemperature-20to60°C
• ExtremeOperationTemperature-25to75°C
Connections• 6xDigitalInputs(INPUT0~INPUT5interminalblock)
• 4xDigitalOutputs(OUTPUT0~OUTPUT3interminalblock)
• 2xAnalogInputs(ANALOG0andANALOG1)
• 1xPulseInput(INPUT0)
• 1xCaseOpen
• 1xBattery(MonitorBatteryLevel)
• 1x20PinTerminalBlock(SmartMaxInterface)
Compliance• RoHSCompliant
Frequency Bands•WCDMA/HSPA850MHz,900MHz,1900MHz,2100MHz
•GSM/GPRS/EDGE850MHz,900MHz,1800MHzand1900MHz
GeneralFeatures• PacketData
• 2WaySMS
• RemoteSMSdiagnostics&reset
• EmbeddedTCP/IP,UDP/IPSTACK
• In-builtperiodicreset
• ExternalDCPowered
• SupportVPNServerandClientMode
• DynamicDNS
• SupportsDNP3(Outstation)usingextensionI/Oboard
• RuggedMetalCasingforindustrialuse
• In-BuiltWebInterface
• ProgrammableschedulertocontrolWANconnection
• Telnetsupport
• Saveandrestoremodemconfigurationfromafile
• FOTA-Firmwareupgradeovertheair
• ExternalantennaconnectivitytomaximiseHSPA coverage
• ExternalLEDtoshowNetworkandConnectionstatus
Dimensions• 210mmX1100mmX650mm(withconnectors)
A mini usb cable is required for first time purchasers of the Smartmax, as most of the programming can only be done via the web interface. This is available in the Smartmax Complete Package (MA-2010C), the Smart-max SDK (MA-7000), and separately. Speak to your Maxon Account
Manager for more information.
Connection Specifications6DigitalInputsCharacteristics
· VIH(Inputvoltagehighrange):2~24V
· VIL(Inputvoltagelowrange):-2~0.8V
· Ri(Inputimpedance):morethan5kΩ
· Rd(Internalpull-up):47kΩforshorttogrounddetection
· Input chatters are filtered by S/W setting
1 Pulse at Input 0
· Frequencyrange0~1000Hz
· Accuracy(25°C)0.05%ofspan
· Temperaturestability 0.005%/°C
· Inputimpedance47kΩ
4DigitalOutputs
· MOSFET switch to ground
· Ro(Outputresistance):lessthan300mΩ
· VOpen(maximumallowedoutputvoltageonopen):24VDC
· IOut(maximumallowedswitchingcurrenttoground):1A
· Switching time < 10 msec
· Chatter free
2 Analog Inputs
· 12bit resolution
· Accuracy:Typical±0.25%;WorstCase ±1%
· Maximumsamplingrate:10sample/sec
· Inputsignaltype:oneof0~20mA,0~5V,or0~10V
· (Theinputtypeisselectedbythejumper“PULSE”onthe connectedSmartmaxandINPUT#ontheI/Oboard)
· Inputimpedanceforthesignaltype0~20mA<100Ω
· Inputimpedanceforthesignaltype0~10VDC>10KΩ