FEATURES ORDERING INFORMATION 4985 E. Landon Dr. Anaheim, CA 92807 Tel. (714) 992-6990 Fax. (714) 992-0471 www.anaheimautomation.com DESCRIPTION • 24-70VDC or 220VAC • 750W Power Rating • Rated Torque of 338 oz-in • Maximum Speed of 3690 RPM • 16 Bit Single-Turn Magnetic Encoder or 2500 PPR Incremental Encoder • IP65 for Body, IP54 Shaft Seal • Insulation Class F • Brake Option Available L011812 KNC-SRV-SMC80S-0075 Servo Motor The SMC80S-0075 Series Servo Motor offers a low-cost solution for motion control applications requir- ing position and speed control. With the 16 Bit Single-Turn Magnetic Encoder or 2500 PPR Incremental Encoder, it allows for better cushioning ability and higher cost-performance ratio. These Servo Motors have Insulation Class F which is the best Insulation Class on the market. They are very quiet with high reliability and stability in high temperature environments. These Servo Motors boast peak torque values up to 1,014 oz-in, provide excellent dynamic response, allow for 3 times the overload capacity, and has a rated torque of 338 oz-in. It is available in a 80mm square flange size, with a brake option. SMC80S - 0075 - 30MAK - 3DSU Flange Size (mm) 80 Rated Power (Watts) 750 Rated Speed (rpm) 3000 Brake A No Brake B Brake Shaft Options K Keyed Shaft Poles 3 Pole Pairs Encoder M 16 Bit Single-Turn Magnetic A 2500 PPR Incremental Encoder Voltage D DC48V L AC220V Connector U Communication Encoder Socket H Three Rows of 15 - Pin Metal Shell Encoder Sockets
Transcript
FEAT
UR
ESO
RD
ERIN
G IN
FOR
MAT
ION
4985 E. Landon Dr. Anaheim, CA 92807 Tel. (714) 992-6990 Fax. (714) 992-0471 www.anaheimautomation.com
The SMC80S-0075 Series Servo Motor offers a low-cost solution for motion control applications requir-ing position and speed control. With the 16 Bit Single-Turn Magnetic Encoder or 2500 PPR Incremental Encoder, it allows for better cushioning ability and higher cost-performance ratio. These Servo Motors have Insulation Class F which is the best Insulation Class on the market. They are very quiet with high reliability and stability in high temperature environments. These Servo Motors boast peak torque values up to 1,014 oz-in, provide excellent dynamic response, allow for 3 times the overload capacity, and has a rated torque of 338 oz-in. It is available in a 80mm square flange size, with a brake option.
SMC80S - 0075 - 30MAK - 3DSUFlange Size(mm)
80
RatedPower(Watts)
750
Rated Speed(rpm)
3000
Brake
A No Brake
B Brake
Shaft Options
K Keyed Shaft
Poles
3 Pole Pairs
Encoder
M 16 Bit Single-Turn Magnetic
A 2500 PPR Incremental Encoder
Voltage
D DC48V
L AC220V
Connector
UCommunication
Encoder Socket
H
Three Rows of 15 - Pin Metal Shell Encoder
Sockets
SPEC
IFIC
ATIO
NS
4985 E. Landon Dr. Anaheim, CA 92807 Tel. (714) 992-6990 Fax. (714) 992-0471 www.anaheimautomation.com
Model KNC-SRV-SMC80S-0075-30MAK-3DSUKNC-SRV-SMC80S-0075-30MBK-3DSU
