1 Copyright © 2010, Everlight All Rights Reserved. Release Date : 25-Nov-2016 Issue No: DSE-0001583 Rev:7 www.everlight.com
SMD B
22-23C/R6GHBHW-C01/2C
Features
․Package in 8mm tape on 7〞diameter reel.
․Compatible with automatic placement equipment. ․Compatible with infrared and vapor phase reflow solder process. ․Multi-color type. ․Pb-free. ․The product itself will remain within RoHS compliant version
․Compliance with EU REACH.
․Compliance Halogen Free .(Br <900 ppm ,Cl <900 ppm , Br+Cl < 1500 ppm)..
Descriptions ․The 22-23C SMD LED is much smaller than lead frame type components, thus enable smaller board size, higher packing density, reduced storage space and finally smaller equipment to be obtained. ․Besides, lightweight makes them ideal for miniature applications. etc. Applications
․Backlighting in dashboard and switch.
․Telecommunication: indicator and backlighting in telephone and fax.
․Flat backlight for LCD, switch and symbol.
․ General use.
DATASHEET SMD B 22-23C/R6GHBHW-C01/2C
2 Copyright © 2010, Everlight All Rights Reserved. Release Date : 25-Nov-2016 Issue No: DSE-0001583 Rev:7 www.everlight.com
Device Selection Guide
Code Chip
Materials Emitted Color Resin Color
R6 AlGaInP Brilliant Red
White Diffused GH InGaN Brilliant Green
BH InGaN Blue
Absolute Maximum Ratings (Ta=25℃)
Parameter Symbol Code Rating Unit
Reverse Voltage VR 5 V
Forward Current IF 25 mA
Peak Forward Current
(Duty 1/10 @1KHz) IFP
R6 60
mA GH 100
BH 100
Power Dissipation Pd
R6 60
mW GH 95
BH 95
Electrostatic
Discharge(HBM) ESD
R6 2000 V
GH 150
BH 150
Operating Temperature Topr -40 ~ +85 ℃
Storage Temperature Tstg -40 ~ +90 ℃
Soldering Temperature Tsol Reflow Soldering : 260 ℃ for 10 sec.
Hand Soldering : 350 ℃ for 3 sec.
DATASHEET SMD B 22-23C/R6GHBHW-C01/2C
3 Copyright © 2010, Everlight All Rights Reserved. Release Date : 25-Nov-2016 Issue No: DSE-0001583 Rev:7 www.everlight.com
Electro-Optical Characteristics (Ta=25℃)
Parameter Symbol Code Min. Typ. Max. Unit Condition
Luminous Intensity Iv
R6 14.5 ----- 36.0
mcd
IF=5mA
GH 35.0 ----- 110
BH 10.0 ----- 24.5
Viewing Angle 2θ1/2 ----- 130 ----- Deg
Peak Wavelength λ p
R6 ----- 626 -----
nm GH ----- 518 -----
BH ----- 468 -----
Dominant
Wavelength λ d
R6 613.0 619.0 625.0
nm GH 523.0 531.5 540.0
BH 466.5 472.5 478.5
Spectrum Radiation
Bandwidth △λ
R6 ----- 20 -----
nm GH ----- 35 -----
BH ----- 25 -----
Forward Voltage VF
R6 1.7 1.85 2.0
V GH 2.7 2.90 3.2
BH 2.7 2.90 3.1
Reverse Current IR
R6 ----- ----- 10
μA VR=5V GH ----- ----- 50
BH ----- ----- 50
Note: 1. Tolerance of Luminous Intensity: ±11% 2. Tolerance of Dominant Wavelength: ±1nm 3. Tolerance of Forward Voltage: ±0.1V
DATASHEET SMD B 22-23C/R6GHBHW-C01/2C
4 Copyright © 2010, Everlight All Rights Reserved. Release Date : 25-Nov-2016 Issue No: DSE-0001583 Rev:7 www.everlight.com
R6 Bin Range of Luminous Intensity
Bin Code Min. Max. Unit Condition
1 14.5 22.5 mcd IF=5mA
2 22.5 36.0
GH Bin Range of Luminous Intensity
Bin Code Min. Max. Unit Condition
A 35.0 55.0
mcd IF=5mA B 55.0 80.0
C 80.0 110
Bin Range of Dominant Wavelength
Bin Code Min. Max. Unit Condition
1 523.0 531.5 nm IF=5mA
2 531.5 540.0
BH Bin Range of Luminous Intensity
Bin Code Min. Max. Unit Condition
1 10.0 17.5 mcd IF=20mA
2 17.5 24.5
Note: 1. Tolerance of Luminous Intensity: ±11% 2. Tolerance of Dominant Wavelength: ±1nm
DATASHEET SMD B 22-23C/R6GHBHW-C01/2C
5 Copyright © 2010, Everlight All Rights Reserved. Release Date : 25-Nov-2016 Issue No: DSE-0001583 Rev:7 www.everlight.com
Typical Electro-Optical Characteristics Curves R6
Ta=25°C
Forward Voltage V (V)
Rela
tive lu
min
ou
s inte
nsity (
%)
-60
Forward Current Derating Curve
Ambient Temperature Ta (°C)
Forw
ard
Curr
ent
FI (m
A)
1
10
-20-40 0 20 6040 10080
Rela
tive lu
min
ou
s inte
nsity (
%)
100
1000
Forw
ard
Curr
ent
Wavelength λ (nm)
Luminous Intensity vs.
Ambient Temperature
I (m
A)
F
Spectrum DistributionForward Voltage
F
Ta=25°C
Forward Current vs.
10
Rela
tive lu
min
ou
s inte
nsity (
%)
1
10
100
1000
Forward Current I (mA)
0
101
102
F
Ta=25°C
Luminous Intensity vs.
Forward Current
Ta=25°CRadiation Diagram
Ambient Temperature Ta (°C)
500
25
0
50
75
100
550 600 650 700 1.20
10
20
25
30
40
50
2.82.01.6 2.4 3.0
0
10
0
20
30
25
40
50
4020 60 10085
70°0.7
0.5 0.40.10.3 0.290°80°
0.6
1.0
0.9
0.8
0° 10°
40°
60°
50°
30°20°
DATASHEET SMD B 22-23C/R6GHBHW-C01/2C
6 Copyright © 2010, Everlight All Rights Reserved. Release Date : 25-Nov-2016 Issue No: DSE-0001583 Rev:7 www.everlight.com
Typical Electro-Optical Characteristics Curves GH
30°
20°
Ta=25°C
10°0°
50°
40°
70°
90°0.4 0.6
80°
0.20.1
60°
1.0
0.9
0.30.5
0.7
0.8
Radiation Diagram
FForward Voltage V (V)Wavelength λ (nm)
Forward Current vs.
Ta=25°C
4.53.83.0 3.4 4.2
Forward Voltage
50
30
40
FI (m
A)
20
25
10
0F
orw
ard
Cu
rre
nt
2.6
Spectrum Distribution
)
600500450 550
100
(
50
75
25
0Re
lative
lu
min
ou
s in
ten
sity
400
%
Ta=25°
Forward Current
Luminous Intensity vs
Ta=25°C
FI (mA)
1010
Forward Current
1000()
%
100
10
1
Re
lative
lu
min
ou
s in
ten
sity
10
Ambient Temperature
Luminous Intensity vs.
1000()
%
100
80 10040 60200-40 -20
85 1006020 40
10
1
50
40
I (m
A)
F
25
30
20
0
10
Fo
rwa
rd C
urr
en
t
0
Ambient Temperature Ta (°C)
Forward Current Derating Curve
-60
Ambient Temperature Ta (°C)
Re
lative
lu
min
ou
s in
ten
sity
DATASHEET SMD B 22-23C/R6GHBHW-C01/2C
7 Copyright © 2010, Everlight All Rights Reserved. Release Date : 25-Nov-2016 Issue No: DSE-0001583 Rev:7 www.everlight.com
Typical Electro-Optical Characteristics Curves BH
25
0
50
75
100Ta=25°C
Forward Voltage V (V)
Rela
tive lu
min
ou
s inte
nsity (
%)
-60
Forward Current Derating Curve
Ambient Temperature Ta (°C)
Forw
ard
Curr
ent
FI (m
A)
1
10
-20-40 0 20 6040 10080
Rela
tive lu
min
ou
s inte
nsity (
%)
100
1000
Forw
ard
Curr
ent
Wavelength λ (nm)
Luminous Intensity vs.
Ambient Temperature
I (m
A)
F
Spectrum DistributionForward Voltage
F
Ta=25°C
Forward Current vs.
10
Rela
tive lu
min
ou
s inte
nsity (
%)
1
10
100
Forward Current I (mA)
10 10
F
Ta=25°C
Luminous Intensity vs.
Forward Current
30°
20°
Ta=25°C
10°0°
Radiation Diagram
40°
60°
50°
90°
80°
0.6
70°
0.20.10.5 0.3 0.4
1.0
0.8
0.9
0.7
Ambient Temperature Ta (°C)
400 550450 500 600 2.60
10
25
20
40
30
50
4.23.43.0 3.8 4.5
1000
1 2
0
10
0
20
30
25
40
50
4020 60 10085
DATASHEET SMD B 22-23C/R6GHBHW-C01/2C
8 Copyright © 2010, Everlight All Rights Reserved. Release Date : 25-Nov-2016 Issue No: DSE-0001583 Rev:7 www.everlight.com
Package Dimension
Suggested pad dimension is just for reference only.Please modify the pad dimension based on individual need.
Note: Tolerances unless mentioned ±0.1mm. Unit = mm
DATASHEET SMD B 22-23C/R6GHBHW-C01/2C
9 Copyright © 2010, Everlight All Rights Reserved. Release Date : 25-Nov-2016 Issue No: DSE-0001583 Rev:7 www.everlight.com
Moisture Resistant Packing Materials
Label Explanation
‧CPN: Customer’s Product Number
‧P/N: Product Number
‧QTY: Packing Quantity
‧CAT: Luminous Intensity Rank
‧HUE: Chromaticity Coordinates & Dom. Wavelength
Rank ‧REF: Forward Voltage Rank
‧LOT No: Lot Number
Reel Dimensions
Note: The tolerances unless mentioned is ±0.1mm ,Unit = mm
DATASHEET SMD B 22-23C/R6GHBHW-C01/2C
10 Copyright © 2010, Everlight All Rights Reserved. Release Date : 25-Nov-2016 Issue No: DSE-0001583 Rev:7 www.everlight.com
Carrier Tape Dimensions: Loaded quantity 2000 PCS per reel
Note: Tolerances unless mentioned ±0.1mm. Unit = mm
Moisture Resistant Packing Process
Label Desiccant LabelAluminum moisture-proof bag
Note: Tolerances unless mentioned ±0.1mm. Unit = mm
DATASHEET SMD B 22-23C/R6GHBHW-C01/2C
11 Copyright © 2010, Everlight All Rights Reserved. Release Date : 25-Nov-2016 Issue No: DSE-0001583 Rev:7 www.everlight.com
Precautions For Use 1. Over-current-proof Customer must apply resistors for protection, otherwise slight voltage shift will cause big current change ( Burn out will happen ). 2. Storage 2.1 Do not open moisture proof bag before the products are ready to use.
2.2 Before opening the package: The LEDs should be kept at 30℃ or less and 90%RH or less.
2.3 After opening the package: The LED's floor life is 1 year under 30℃ or less and 60% RH or less.
If unused LEDs remain, it should be stored in moisture proof packages. 2.4 If the moisture absorbent material (silica gel) has faded away or the LEDs have exceeded the
storage time, baking treatment should be performed using the following conditions.
Baking treatment : 60±5℃ for 24 hours.
3. Soldering Condition 3.1 Pb-free solder temperature profile
Pre-heating
150~200°C60~120sec.
Above 217°C 60~150sec.
260°C Max.10sec. Max.
6°C/sec.Max.
Above255°C 30sec.Max.
3°C/sec.Max.
3.2 Reflow soldering should not be done more than two times. 3.3 When soldering, do not put stress on the LEDs during heating. 3.4 After soldering, do not warp the circuit board.
4.Soldering Iron
Each terminal is to go to the tip of soldering iron temperature less than 350℃ for 3 seconds within once in less than the
soldering iron capacity 25W. Leave two seconds and more intervals, and do soldering of each terminal. Be careful because the damage of the product is often started at the time of the hand solder. 5.Repairing Repair should not be done after the LEDs have been soldered. When repairing is unavoidable, a double-head soldering iron should be used (as below figure). It should be confirmed beforehand whether the characteristics of the LEDs will or will not be damaged by repairing.
DATASHEET SMD B 22-23C/R6GHBHW-C01/2C
12 Copyright © 2010, Everlight All Rights Reserved. Release Date : 25-Nov-2016 Issue No: DSE-0001583 Rev:7 www.everlight.com
Application Restrictions
High reliability applications such as military/aerospace, automotive safety/security systems, and medical equipment may require different product. If you have any concerns, please contact Everlight before using this product in your application. This specification guarantees the quality and performance of the product as an individual component. Do not use this product beyond the specification described in this document.
DISCLAIMER 1. EVERLIGHT reserves the right(s) on the adjustment of product material mix for the specification. 2. The product meets EVERLIGHT published specification for a period of twelve (12) months from date of shipment. 3. The graphs shown in this datasheet are representing typical data only and do not show guaranteed values. 4. When using this product, please observe the absolute maximum ratings and the instructions for using outlined in
these specification sheets. EVERLIGHT assumes no responsibility for any damage resulting from the use of the product which does not comply with the absolute maximum ratings and the instructions included in these specification sheets.
5. These specification sheets include materials protected under copyright of EVERLIGHT. Reproduction in any form is prohibited without obtaining EVERLIGHT’s prior consent.
6. This product is not intended to be used for military, aircraft, automotive, medical, life sustaining or life saving applications or any other application which can result in human injury or death. Please contact authorized Everlight sales agent for special application request.