SMITHVAC The HV2115 is an efficient combination of power and maneuverability. With high capacity debris and water tanks, this 2700 CFM compact tandem hydrovac can get into and tackle almost any job.
www.smithvac.com
2
COMPACT AND MANEUVERABLE• The HV2115 is only 31 feet long!
USER FRIENDLY• Simple rear mounted controls close to the
excavation area.• The full function boom has an Omnex wireless
remote to control the boom and all digging functions.
• The unique wash/pressure control allows infinite pressure delivery.
• The boiler uses digital temperature control, diagnostic indicator lights and momentary test override switches.
• Equipped with standard operator comforts: featuring a heated clothing cabinet, boot and mitt dryer.
• Ample storage with deck-mounted hose tubes and heated cabinets with adjustable storage shelves.
• All components easily accessible for stress free maintenance.
4
QUIET• The Hibon 2700 CFM blower is mounted in a
sound deadening enclosure. Operators and customers will be thrilled with the decreased sound pressure compared to competitors' units.
DESIGNED & PROVEN TO WORK IN BITTER COLD • There is no other hydrovac that incorporates all
wash components mounted in a heated cabinet directly connected to the water tank. This very simple feature guards against freezing and there is rarely a need to circulate water.
BACKED BY FACTORY SUPPORT• Smith Industries stocks all replacement parts
and is always ready to serve you. Technical support is available directly from your job site via telephone.
1
5
2
1
COMPACT - RELIABLE - LIGHTWEIGHT - QUIET - MANEUVERABLE
3
COMPACT POWERFUL MANEUVERABLE
PARAMETER VALUEDebris Tank 8 M3 / 10.5 yd3
Water Tank 5.6 M3 / 1500 USG
Length 31'
Wheel Base 19' 9"
Height 12'
Blower Hibon 822XL 2700 CFM - 8" piping
Standard Pressure Pump 10 GPM @ 3000 PSI / optional 20 GPM @4000 PSI
Boiler 660,000 BTU 12 volt diesel fired / optional 800,000 BTU
Boom 8" full featured boom with 8' extension
Front Axle 18,000 lb
Rear Axle 46,000 lb
Recommended Horse Power 350 to 450 HP
Recommended Transmission Standard or Allison Automatic
Power Take Off Transfer case / Chelsea hot shift
Blower Drive Transfer Case Mounted Hydraulic vane pump and bent axis piston motor
Auxiliary Hydraulic Pump Pressure compensated variable displacement piston type
Wash Pump Drive Variable pressure auto regulated speed
Hoist Double acting telescopic 50 degree tilt
Specifications Smithvac HV2115 Hydrovac
AVAILABLE OPTIONSHose reel with jetter hose and heater
Wireless pressure wash adjustment
Four drawer tool cabinet
Polished aluminum cabinet doors
Smooth painted cabinet doors
Mud blade unload system
Pressure pump 20 GPM @ 4000 PSI
Boiler upgrade 800,000 BTU
Metallic Paint
ON THE MARKETNEW SMITH
INDUSTRIES
Reliable Hydrovac EquipmentReliable hydrovac equipment that peforms day after day especially in cold weather
www.smithvac.com
Head Office and Factory800 47 Street EastSaskatoon SK S7K 0X4Telephone: 306 373-7622Fax: 306 244-4748E-mail: [email protected]
SMITHINDUSTRIES