Overview
Special Software for convenient Camera Control and Editing of Thermographic Images
Software Family IRBIS® 3
Numerous analysis functions and tools
Extensive visual displays of measurement data
Professional generation of thermography reports
Modular concept permits an application-
specific configuration
SDK allows to connect infrared cameras
in existing systems
Guarantees work
ing efficiency
www.InfraTec.eu
Overview
NavigationThe intuitively operating concept as well as the adopted well-known set of icons allows even the unfamiliar user to quickly learn the handling. The user interface can be designed individually and saved as a part of the setup. This allows the user to keep an overview of the operating functions at any time.
Favourite FilesThe list of favourites clearly arranges all open thermograms and sequences. In combination with a preview image this allows easy and direct access to single thermal images or sequences.
Thermogram Powerful integrated measuring and editing functions facilitate a compre-hensive and fast analysis of digital thermograms. Numerous automatic functions for image correction and opti misation support the user in clear-ly recognising and visualising thermal details of measured objects.
DiagramsNumerous, graphically attractive, two and three-dimensional diagrams help to swiftly visualise and export tem-perature data of defined measured areas in individual images or image sequences.
Table of measured DataUser-defined measured data and sta-tistical parameters of thermograms or their partial areas can be presented very clearly in a tabular form that can be de-signed by the user individually.
Visual ImageVisual images that have been recorded parallel either by an external camera or a digital camera integrated inside a thermographic camera may optionally be added to the respective thermo-gram by just a click of a button or auto-matically. This serves to clearly allocate measuring scenarios or problem spots.
1
2
3
4
5
6
1
2
3
4
6
5
Guarantees work
ing efficiency
Modules
Sequence Editor
Control and Acquisition Software
The sequence editor allows to man-ually or automatically select thermo-graphic data from complex thermal image series as well as to filter image series. These may be stored in the raw image material with respective com-ments or be reconstructed on their basis.
Data Acquisition from digital infrared thermographic Images � Time and temperature-controlled acquisition of digital thermographic data at up to 10 Hz � Extensive visualisation and analysis of digitally transferred thermal images � Numerous online temperature-measuring functions: Identification of measuring spots and
measuring areas, global correction of emissivity by area or spot within the online thermal image
High-speed Data Collection of digital infrared thermographic Images � Digital data are collected at the camera’s maximum frame rate � Online differential image mode and temperature profile display � External trigger option, retrigger, multiple signal sequence, pretrigger � Freely definable temperature trigger � Set parameters of measuring areas and thresholds values, alarm function
Extension Module for convenient Process Control � Permits intensity- or temperature-dependent control of processes via digital
or analog inputs and outputs � Trigger and alarm function for freely definable signal thresholds � Utilisation of different I/O cards for connecting to the processes � Individual expansion by specific project solutions
Linking thermographic Cameras with PCs or Notebooks � Remote control of the camera-operating functions via a graphic interface � Real-time visualisation of digitally transferred thermal images � Storage of real-time thermographic video sequences
Each
IRBI
S® 3
mod
ule
is b
ased
on
the
exte
nt o
f fun
ctio
ns o
f the
pre
viou
s le
vel o
f sof
twar
e.
Parallel Recordings of Data Streams � Parallel recording of data streams from multiple infrared cameras and VIS cameras � Fully synchronous of data up to eight cameras � Additional storage of external data, e. g. GPS data
IRB
IS®
3 re
mo
teIR
BIS
® 3
con
tro
lIR
BIS
® 3
on
line
IRB
IS®
3 p
roce
ssIR
BIS
® 3
visi
on
FunctionsThe state-of-the art IRBIS® 3 software family designed by InfraTec represents the ideal tool for fast analysis of thermographic image data and for comfortably drafting thermographic reports. Packages of several levels are available with application specific expansion modules. The modular software concept permits a tailored and application-specific program configuration and facilitates its application in any field.
The new Dimension of Thermography Analysis
Image merging enables to put a digi-tal photo of an object or a scene with the respective thermal image on each other. Thereby, thermographic infor-mation can be visualised directly on the photograph, improving orientation decisively.
The 3D view with OpenGL offers another perspective onto the scene.
By means of isotherms, critical tempera-ture ranges can quickly be localised.
IRBIS® 3 Analysis SoftwareIRBIS® 3 represents a complete and convenient tool for the evaluation of your thermographic data. Multiple functions tailored to your particular needs help you work in a precise and efficient manner in order to achieve convincing report and analysis results.
IRBIS® 3 Expansion ModulesBy using IRBIS® 3 expansion modules the software packages IRBIS® 3, IRBIS® 3 plus and IRBIS® 3 professional can be upgraded with useful additional functions.
IRBIS® 3 Control and Acquisition SoftwareIRBIS® 3 control and acquisition software allows to control the infrared camera directly from the computer or tablet computer and acquire data of to-be-monitored processes synchronically.
Software Family IRBIS® 3
Expansion Modules
IRBIS® 3 active
IRBIS® 3 mosaic
AVI Generator
Macro Editor
Sequence Editor
Palette Editor
Analysis Software
IRBIS® 3.1
IRBIS® 3.1 plus
IRBIS® 3.1 professional
Control and Acquisition Software
IRBIS® 3 remote
IRBIS® 3 control
IRBIS® 3 online
IRBIS® 3 process
IRBIS® 3 report
Functions
� Merging visual and infrared image � Manual and automatic temperature range selection � Temperature profiles along any lines and across any measured areas � Automatic indication of maximum and minimum temperature mean value � Global and selective correction of emissivity � Basic graphic and image-editing functions � Integrated Word-based report function � Support for infrared camera file formats of InfraTec’s product range � Multi-lingual user interface � Image improvement through digital filtering � And much more
IRBIS® 3 plusAs per IRBIS® 3 and in addition:
� Editing and analysing of thermal image sequences � 3D temperature profile display � Pre-defined models for emissivity correction � Temperature-time-diagram / profile-time-diagram � Differential image display and differential spot display � Numerous statistics functions, histogram � Adoption of GPS coordinates � AVI Generator – converting of video sequences � Accumulation of recorded thermographic images � Export of measuring data (csv, ASCII etc.) � And much more
IRBIS® 3 professionalAs per IRBIS® 3 plus and in addition:
� Extended and specific models for correcting emissivity, among others for automatically correcting emissivity by pixel
� Geometric measurement within the thermogram � 3D thermographic images and sequences display � Expandable for specific experimental setups / SDK � Parallel analysing of several thermograms � IRBIS® 3 mosaic, Macro, Sequence and Palette Editor � And much more
IRBIS® 3 Analysis options of the circuit board thermogram
Temperature profiles of the lines defined as L1-L4
Histogram of the temperature distribution of the total thermogram
Gallery view of the recorded sequence
Temperature variation in time of the defined measurement definitions
3D profile of the thermogram
3D temperature profile of line L1 in time
Thermogram of a circuit board with measurement definition
The IRBIS® 3 software family offers var-ious models for correcting the emis-sivity by means of which thermograms can be corrected globally, with regard to defined partial areas or automatical-ly by pixel.
Correction Models
All relevant correction models have been provided in a clearly understandable visual form. With its help the respective measuring situation can be reconstruct-ed. Sources of error – such as interference by radiation from the environment or attenuation properties of the measuring distance – are taken into consideration in calculating the temperature (in the calculation formula) in order to safely avoid faulty measurement. Among others, direct and indirect emissivity correction by pixel is available.
IRBIS® 3 mosaicShould a measuring scenario consist of several individual images, IRBIS® mosaic will help you to produce quickly and easily a combined image. The software will automatically look for places of geometric overlapping and will put them together. The thermogram resulting therefrom can further be analysed with all its measured data.
Correcting the emissivity by pixel
This module permits the automatic export of thermal image series or several single images into descriptive AVI movies. It is also possible to define a partial area of the thermogram, which is designated by the user, for AVI export. The thereby gained sequences can be played on any commercial media player.
Extensive sets of commands can be summarised by the user into a macro without any special programming skills. Com-plex and repetitive analysis processes can therefore be per-formed in a timesaving and automated way.
With correction Without correction
Four individual thermal images Automatically produced a combined thermogram
Emissivity correction model, example
AVI Generator Macro Editor
Equipment
Add-on software
IRBIS® 3 report
IRBIS® 3 activeThe active thermography software IRBIS® 3 active by InfraTec is a modern and universally usable tool for thermographic material testing.
� Comfortable data evaluation possibilities of image sequences � Algorithms independent of emissivity � Analysis with different active thermography methods: Quotient Method, Pulse Phase Thermography,
Lock-In-Thermography � Storage of input parameters for different test objects � Online and offline analysis
Analysis methods of IRBIS® 3 active � Quotient method: The heat flow of the test object will be analysed by means of incline or decline of the surface
temperature. � Pulse Phase Thermography (PPT): The temperature curve will be analysed depending on different frequencies
(n = 1, 2, 3 ...). One amplitude image and one phase image will be established for each frequency. � Lock-in Thermography (LIT): The sequences of periodical excitation of the test object will be analysed.
The stand-alone thermography software IRBIS® 3 report is part of the software family IRBIS® 3 and enables time efficient report generation by using variable templates. Even largest amounts of data, as they are generated by the professional thermographer, can become documented as a PDF report in a hassle-free and swift way.
By means of a comprehensive set of analysis tools, measuring scenarios can conveniently and effortlessly be processed, analysed and documented.
Apart from routine analyses of thermo-graphic images, IRBIS® 3 report also meets complex demands for automation.
Features of IRBIS® 3 report � Automated analysis and correction of
thermographic images � Powerful functions and easy handling � Wide choice in provided report tem-
plates in compliance with VdS standard � Simple setup of individually adjusted
report templates � Storage of report properties in the
template � Completed reports can subsequently be
altered and extended � Deposit of calculation rules using the
formula editor � Automated and manual transfer of
camera parameters
Thus IRBIS® 3 report will assist you in solving everyday thermographic jobs professionally with a minimum in time and effort. The pro-fessional thermography software IRBIS® 3 report is available for thermography systems offered by InfraTec.
Integrated template in compliance with VdS standard
Thermography report, for example pump
Equipment
Software functions IRBIS® 3 IRBIS® 3 plus IRBIS® 3 professionalAnalysis SoftwareMulti-lingual interface × × ×Change palette selection and temperature display range × × ×Display editing windows simultaneously 1 1 4Display / add / edit real image × × ×Play / add / edit audio comment × × ×Merging visual and infrared image × × ×Integrated WORD-based report function × × ×Image export / measured data export into WORD, PDF, TIFF, BMP, JPEG, ASCII × × ×Image editing functions (interpolation, rotate, reverse, etc.) × × ×Mirror / distort thermal image – – ×Measured areas (spot, line, polygon, rectangle, circle, ellipse) × × ×Display table of measured date, parameters and comments × × ×Temperature profile diagram × × ×Measured areas (curved line, freehand line, circular ring, segment, freehand) – – ×Image accumulation – × ×Differential image display and differential spot display – × ×Various statistics functions, histogram – × ×Display 3D thermogram – – ×Display / define isotherms 5 10 20Improve image by digital filtering 3 3 5Determine emissivity × × ×Correction of emissivity (global, laminar, selective) × × ×Pre-defined models for correcting emissivity – × ×Models for automatically correcting emissivity by pixel – – ×Adoption of GPS coordinates – × ×Geometric measurement within the thermogram – – ×Play, thin out, store image sequences – × ×Temperature-time-diagram / profile-time-diagram – × ×3D temperature profile display – × ×Expansion modulesIRBIS® 3 active / active online – o oIRBIS® 3 mosaic – add-in of single thermal images o o ×AVI Generator (add / edit / play) o × ×Macro Editor (setup / edit / activate) – o ×Sequence Editor – o ×Palette Editor (freely defined colour palettes) o o ×Control and acquisition softwareIRBIS® 3 remote o o oIRBIS® 3 online – o oIRBIS® 3 control – o oIRBIS® 3 process – o oIRBIS® 3 vision o o oAdd-on softwareIRBIS® 3 report o o o
Caption: – = not included | o = optionally available | × = included
InfraTec GmbHInfrarotsensorik und MesstechnikGostritzer Str. 61 – 6301217 Dresden / GERMANYPhone +49 351 871-8630Fax +49 351 871-8727E-mail [email protected] www.InfraTec.eu
Headquarters
InfraTec infrared LLC5048 Tennyson Pkwy.Plano TX 75024 / USAPhone +1 844-226-3722 (toll free)E-mail [email protected] www.InfraTec-infrared.com
USA office
Latest information on the internet.
Design and specification subject to change without prior notice.© InfraTec 03/2016 (All the stated product names and trademarks remain in property of their respective owners.)
DRESDENDRESDEN
