Software Upgrade Guide

◆ Notice ◆ Notice

1. Check correctly the Full model name of TV Set. Ex) 42LB6900-TA : The Full model name must include national code.(ex. –TA)

2. Do not unplug the TV power cord during software upgrading.

1. Method to verify the Full model name of TV Set .1. Method to verify the Full model name of TV Set .

Method① . Check the label on the back of the TV set. Method① . Check the label on the back of the TV set.

1) Press [Settings] key of remote control.

2) Move to the “General”

1) Press [Settings] key of remote control.

2) Move to the “General”

3) Select the ”About This TV”

4) Check the “Model”

3) Select the ”About This TV”

4) Check the “Model”

Method ②. Check the Settings.Method ②. Check the Settings.

1) Check the “Model NO.” (EX. 42LB6900-TA) 1) Check the “Model NO.” (EX. 42LB6900-TA)

11 Searching the software.Searching the software.

① Select your country after connecting to www.lg.com. ① Select your country after connecting to www.lg.com. ② Move to the ”Support” and click the “Download & Manuals”

② Move to the ”Support” and click the “Download & Manuals”

③ Fill in the your Model name. (Ex. 42LB6700(Fill Model name except “-TA”.)

④ Click the “Search”.

③ Fill in the your Model name. (Ex. 42LB6700(Fill Model name except “-TA”.)

④ Click the “Search”.

⑤ Click the “Software update” and you can see the software file.

⑤ Click the “Software update” and you can see the software file.

22 Downloading the software file to the USB Memory device.Downloading the software file to the USB Memory device.

Insert the USB memory device into USB port of the TV.Insert the USB memory device into USB port of the TV.33 Position of USB port : Side or Rear Position of USB port : Side or Rear

① Click to all of file to download it from the website to your PC. ① Click to all of file to download it from the website to your PC.

② Unzip the first “….vol1” software file. ② Unzip the first “….vol1” software file.

③ Insert the USB memory device into USB Port of the PC. ③ Insert the USB memory device into USB Port of the PC.

④ Make a folder in USB Memory device. Folder name must be “LG_DTV”. ④ Make a folder in USB Memory device. Folder name must be “LG_DTV”.

⑤ Save the software file to “LG_DTV” folder of USB Memory device. ⑤ Save the software file to “LG_DTV” folder of USB Memory device.

oror

② If below message will appear on TV, please select “INSTALL” ② If below message will appear on TV, please select “INSTALL”

1) Copying the new version software file from USB Memory device to the

TV system memory.

※ Don’t remove the USB Memory device while this message is displayed.

Do not unplug the TV power cord while this message is displayed.

1) Copying the new version software file from USB Memory device to the

TV system memory.

※ Don’t remove the USB Memory device while this message is displayed.

Do not unplug the TV power cord while this message is displayed.

2) Running the software upgrade.

※ Do not unplug the TV power cord while this message is displayed.

2) Running the software upgrade.

※ Do not unplug the TV power cord while this message is displayed.

3) Go to “MENU”, then choose “General”, then “About this TV” to see your update progress bar. If the

upgrade is completed, TV will restart automatically in 5 seconds.

3) Go to “MENU”, then choose “General”, then “About this TV” to see your update progress bar. If the

upgrade is completed, TV will restart automatically in 5 seconds.

44 Running the software Upgrade.Running the software Upgrade. ① If below message appear on TV, please select “STAY”. ① If below message appear on TV, please select “STAY”.

※ If there are the same or lower software version in the USB memory device

than software version in your TV, doesn’t appear message.

※ A few USB memory device may not be compatible with the TV,

in that case you use another USB device.

※ If there are the same or lower software version in the USB memory device

than software version in your TV, doesn’t appear message.

※ A few USB memory device may not be compatible with the TV,

in that case you use another USB device.