Throughout the world, BOMAG refuse com-pactors from medium and heavyweight clas-ses as well as the heavyweight high-speedBOMAG soil compactor are proving their effi-ciency and reliability on large landfill andearthwork sites. Consistent technical imple-mentation of decades of practical experiencepays off for the user in their effectiveness andeconomic efficiency.
The technology which has been so success-ful on large waste disposal sites and earth-works also offers potential on smaller landfillsand medium-sized earthworks. For this rea-son, BOMAG has designed a new, lighterseries of machines which bring the technicaladvantages of large BOMAG compactors tosmaller scale operations.
Four machines – same benefits. Whether youchoose the high-speed soil compactor or oneof three refuse compactor models, each
machine is designed specifically for its job –drawing on years of BOMAG experience andconstructed to the highest quality standards.And it's only with BOMAG that you find thiscombination of advantages:• No refuse ingress into the frame or engine
compartment with the fully enclosed frontand rear frame and belly pan.
• Optimum compaction and traction withcontinuous wheel ground contact plusstress-free frame with robust oscillatingarticulated joint designed for tough landfillwork.
• Compaction wheels with design choicesfor specific applications.
• High compaction with the special BOMAGwheel teeth and compaction segments.
Purpose-built for small landfill sites
BC 462 RB – refuse compactor with dozer blade (21 t).
BC 472 RB – refuse compactor with dozer blade (24 t).
BC 472 RS – refuse compactor with bucket (25 t).
BC 462 EB – high-speed soil compactor (21 t).
Fully enclosed frame.
Highly effective wheel and scraper system.
Oscillating articulated joint: +/- 40° steering angle,+/- 15° frame oscillation.
Special wheel design for optimum compaction.
▼
▼
▼
▼
Refuse compactor wheel with teeth – basic version forlow waste quantities.
Soil compactor wheel with pad feet and segments.
Refuse compactor wheel with teeth and segments forhigh compaction.
No wire in the wheels with the wire deflector on therefuse compactor wheel.
• Maximum soil and waste compaction andtraction from all wheel types - kept cleanwith adjustable scraper system.
• Modern powerful turbo-diesel engine with195 kW.
• Low-wear travel drive with hydraulic over-load protection and 4 hydrostatic wheelmotors: no gearbox, no axles, no driveshafts.
• Trouble-free operation and long servicingintervals with highly effective micro-filte-ring in the hydraulics system.
• Comfortable vibration insulated operator'scab with joystick operation for steeringand dozer blade or bucket.
• Best access to daily service points througha wide opening engine hood.
• Easy transport from job to job: The high-speed soil compactor and some refusecompactor models are only 3 m wide andcan be transported easily – often withoutspecial permits.
• A tilting blade is available as an option onthe soil compactor for distributing andlevelling.
• The all-purpose refuse compactor withloading bucket: pushing, distributing,transporting and loading with onemachine.
Modern, comfortable and safe cab, fulfils ROPS andFOPS requirements.
Comfortable operator's station with outstanding viewand joystick operation.
Hydrostatic all-wheel drive: simple and robust.
Tilting blade for the soil compactor.
Optimised technology on site
▼
▼
▼
▼
Basic technical data
02/0
5 P
RF
108
063
•
•••
••••••••
Head Office/Hauptsitz:BOMAG, Hellerwald, 56154 Boppard, GERMANY,Tel.: +49 6742 100-0, Fax: +49 6742 3090, e-mail: [email protected], www.bomag.comBOMAG Maschinenhandelsgesellschaft m.b.H., Porschestraße 9, 1230 Wien, AUSTRIA, Tel.: +43 1 69040-0, Fax: +43 1 69040-20, e-mail: [email protected] (CANADA), INC., 3455 Semenyk Court, Mississauga, Ontario L5C 4P9, CANADA, Tel.: +1 905 361 9961, Fax: +1 905 361 9962, e-mail: [email protected] (CHINA) Compaction Machinery Co. Ltd., No. 2808 West Huancheng Road,Shanghai Comprehensive Industrial Zone (Fengxian), Shanghai 201401, CHINA,Tel.: +86 21 33655566, Fax: +86 21 33655508, e-mail: [email protected] Equipment Hong Kong LTD, Room 1003, 10/F Cham Centre 700, Castle Peak Road,Kowloon, HONG KONG, Tel: +852 2721 6363, Fax: +852 2721 3212, e-mail :[email protected] FRANCE S.A.S., 2, avenue du Général de Gaulle, 91170 Viry-Châtillon, FRANCE, Tel.: +33 1 69578600, Fax: +33 1 69962660, e-mail: [email protected] (GREAT BRITAIN), LTD., Sheldon Way, Larkfield, Aylesford, Kent ME20 6SE, GREAT BRITAIN, Tel.: +44 1622 716611, Fax: +44 1622 718385, e-mail: [email protected] Italia Srl., Z.I. Via Mella 6, 25015 Desenzano del Garda (BS), ITALY, Tel.: +39 030 9127263, Fax: +39 030 9127278, e-mail: [email protected] BOMAG Polska Sp. z o.o., Ul. Szyszkowa 52, 02-285 Warszawa, POLAND,Tel.: +48 22 482 0400, Fax: +48 22 482 04 01, e-mail: [email protected] BOMAG RUS OOO, 141400, RF, Moscow region, Khimki, Klayazma block, h. 1-g, RUSSIA,Tel: +7 (495) 287 92 90, Fax: +7 (495) 287 92 91, e-mail: [email protected] GmbH, 300 Beach Road, The Concourse, #18-06, Singapore 199555, SINGAPORE, Tel.: +65 294 1277, Fax: +65 294 1377, e-mail: [email protected] Americas, Inc., 2000 Kentville Road, Kewanee, Illinois 61443, U.S.A.,Tel.: +1 309 8533571, Fax: +1 309 8520350, e-mail: [email protected]
+ www.bomag.com + www.bomag.com + www.bomag.com + www.bomag.com +
04/0
7 P
RE
108
289
Advantagesat a glance:
Proven pushing and travelperformance with high enginepower and hydrostatic all-wheeldrive.
No ingress by refuse or soilinto the frame due with the fullyenclosed belly pan.
Constant wheel ground contact with the oscillating articulated joint.
High compaction and out-standing traction with specialBOMAG wheel design.
Constant full depth perfor-mance due to adjustable scrapersystem.
No wire in the wheels with thetwo-stage wire deflector system.
Safe and simple operation.
Minimum maintenance.
Simple transport.
Simple to transport with narrow design: only 3 metres wide (depending on model).
Refuse compactor bucket version with full truck loading height.
The machines illustrated may show optional equipment which can be supplied at additional cost. Specifications may change without notice.
BC462 RBUnit
[---] Refuse
21.000
Deutz
6
195/2300
261/2300
2998
1940
---
Refuse
24.000
Deutz
6
195/2300
261/2300
3600
1940
---
Refuse
25.000
Deutz
6
195/2300
261/2300
2998
2135
3,3
Earthworks
21.000
Deutz
6
195/2300
261/2300
2998
980
---
[kg]
---
---
---
kW]
[hp]
[mm]
[mm
[m3]
BC472 RB
BC472 RS
BC462 EB
Weights
Nominal operating weight
Engine specifications
Engine manufacturer
Type
Number of cylinders
Power ISO 9249 / rpm
Power SAE J 1349 / rpm
Dozer blade / bucket
Width
Height
Bucket capacity (SAE)
Application
[mm]Width per front wheel
Width per rear wheel
External wheel diameter
Transport dimensions
Total length with blade/bucket
Total width with blade/bucket
Height with ROPS
Travel data
Speed (1) fwrds./bwrds.
Speed (2) fwrds./bwrds.
Steering angle +/-
Frame oscillating angle +/-
900
900
1660
8290
2998
3390
0-4,5
0-12
+/- 40° +/- 40°
+/- 15° +/- 15°
1125
900
1660
8290
3600
3390
0-4,5
0-12
+/- 40°
+/- 15°
900
1660
8835
2998
3390
0-4,5
0-12
+/- 40°
+/- 15°
900
1580
8290
2998
3350
0-4,5
0-12
900 900
[mm]
[mm]
[mm]
[mm]
[mm]
[km/h]
[km/h]
degree
degree
UnitBC
462 RBBC
472 RBBC
472 RSBC
462 EB
Compaction wheels
TCD 2013 LO6 2V