Technical Data Condensate Auto Drain Trap Standard
Model : DM-5N
Condensate Auto Drain Trap DRAIN MASTER S
EnE-DM5N-E003 Edition:2013.01
m3/min m3/min m3/min
Green 8 16 80
ABS
Climatic zone
Peak compressor Peak dryer Peak filter
performance performance performance
Scope of Application Oil-Free Condensate or Oil-Contaminated Condensate
Material
Housing Aluminium, Hardcoated
O-ring NBR
Diaphragm AU
PCB Board Casing
Condensate Discharge G3/8"(NPT 3/8")
Weight (empty) 1.3 kg
Condensate Feed G1/2"(NPT 1/2") x 2 point
Venting Line 1/2"(NPT 1/2")
Temperature (min/max) .+1℃ ~ +80℃
Safety Class IP 65
Order Ref. DM 5N CA
Working Pressure (min/max) 0.8 ~16 bar
TECHNICAL DATA
Model DM - 5N
Condensate Auto Drain Trap DRAIN MASTER S
1 bar 2 bar 3 bar 4 bar 5 bar 6 bar 7 bar
21 24
Standard
Order Voltages
EnE-DM5N-E003
Designation Heater Unit
Order Ref. A DM00-1 A DM00-2
Power 220Vac/50~60Hz/125W 110Vac/50~60Hz/125W
Operating Pressure(max) 25 bar
with heating unit and proper insulation; down to -25℃Edition:2013.01
Cable cross section Ø 6.0 ~ 8.0 mm; 3 x 0.75mm
Thermostatically controlled heating (Option)
Power Input 2.0 VA Fuse protection(normal lag) 0.5 A
Discharge Capacity of DRAIN MASTER B (DM-5N)
Working pressure
Peak load (l/h)
Voltage90~260Vac(Free Voltage) / 50~60Hz
24Vac.48Vac /24Vdc.48Vdc
28 32
*Green -Dry and cool climate(such as in Northern Europe, Canada, Northern states of the USA, Central Asia)
*Blue -temperate climate(such as in Central and Southern Europe, Central Americal)
*Red -humid, tropical climate(such as in the coastal regions of South-East Asia, Oceania, Amazon and Congo regions)
14 70
Red 5 10 50
DM-5N Blue 7
Condensate Auto Drain Trap DRAIN MASTER S
DIMENSION
DRAIN MASTER S (DM-5N)
Subject to technical changes without prior notice, errors not excluded.
EnE-DM5N-E003 Edition:2013.01
Condensate Auto Drain Trap DRAIN MASTER S
Technical Data Condensate Auto Drain Trap Condensate Auto Drain Trap Standard
Model : DM-15
EnE-DM15-E003 Edition:2013.01
Order Ref. DM 15 CA
TECHNICAL DATA
Model DM - 15
Condensate Auto Drain Trap DRAIN MASTER S
Condensate Discharge G1/2"(NPT 1/2")
Condensate Feed G1/2"(NPT 1/2") x 2 point
Venting Line 1/2"(NPT 1/2")
Temperature (min/max) .+1℃ ~ +80℃
Safety Class IP 65
Order Ref. DM 15 CA
Working Pressure (min/max) 0.8 ~16 bar
ABS
Scope of Application Oil-Free Condensate or Oil-Contaminated Condensate
Material
Housing Aluminium, Hardcoated
O-ring NBR
Diaphragm AU
PCB B d C i
Condensate Discharge G1/2 (NPT 1/2 )
Weight (empty) 1.65 kg
m3/min m3/min m3/min
1Green 24 48 240
ABS
Climatic zone
Peak compressor Peak dryer Peak filter
performance performance performance
PCB Board Casing
Discharge Capacity of DRAIN MASTER S (DM 15)
*Green -Dry and cool climate(such as in Northern Europe, Canada, Northern states of the USA, Central Asia)
*Blue -temperate climate(such as in Central and Southern Europe, Central Americal)
*Red -humid, tropical climate(such as in the coastal regions of South-East Asia, Oceania, Amazon and Congo regions)
42 210
Red 15 30 150
DM-15 Blue 21
1 bar 2 bar 3 bar 4 bar 5 bar 6 bar 7 bar
43
Standard
Order Voltages
Discharge Capacity of DRAIN MASTER S (DM-15)
Working pressure
Peak load (l/h)
Voltage90~260Vac(Free Voltage) / 50~60Hz
24Vac 48Vac /24Vdc 48Vdc
685950
Order Voltages
Designation Heater Unit
Cable cross section Ø 6.0 ~ 8.0 mm; 3 x 0.75mm
Thermostatically controlled heating (Option)
Power Input 2.0 VA Fuse protection(normal lag) 0.5 A
24Vac.48Vac /24Vdc.48Vdc
EnE-DM15-E003
Operating Pressure(max) 25 bar
with heating unit and proper insulation; down to -25℃Edition:2013.01
Order Ref. A DM00-1 A DM00-2
Power 220Vac/50~60Hz/125W 110Vac/50~60Hz/125W
Condensate Auto Drain Trap DRAIN MASTER S
DIMENSION
DRAIN MASTER S (DM-15)
Subject to technical changes without prior notice, errors not excluded.
EnE-DM15-E003 Edition:2013.01
Condensate Auto Drain Trap DRAIN MASTER S
Technical Data Condensate Auto Drain Trap Condensate Auto Drain Trap Standard
Model : DM-50
EnE-DM50-E003 Edition:2013.01
Order Ref. DM 50 CA
TECHNICAL DATA
Model DM - 50
Condensate Auto Drain Trap DRAIN MASTER S
Condensate Discharge G1/2"(NPT 1/2")
Condensate Feed G1/2"(NPT 1/2") x 2 point
Venting Line 1/2"(NPT 1/2")
Temperature (min/max) .+1℃ ~ +80℃
Safety Class IP 65
Order Ref. DM 50 CA
Working Pressure (min/max) 0.8 ~16 bar
ABS
Scope of Application Oil-Free Condensate or Oil-Contaminated Condensate
Material
Housing Aluminium, Hardcoated
O-ring NBR
Diaphragm AU
PCB B d C i
Condensate Discharge G1/2 (NPT 1/2 )
Weight (empty) 2.2 kg
m3/min m3/min m3/min
0Green 80 160 800
ABS
Climatic zone
Peak compressor Peak dryer Peak filter
performance performance performance
PCB Board Casing
Discharge Capacity of DRAIN MASTER S (DM 50)
*Green -Dry and cool climate(such as in Northern Europe, Canada, Northern states of the USA, Central Asia)
*Blue -temperate climate(such as in Central and Southern Europe, Central Americal)
*Red -humid, tropical climate(such as in the coastal regions of South-East Asia, Oceania, Amazon and Congo regions)
140 700
Red 50 100 500
DM-50 Blue 70
1 bar 2 bar 3 bar 4 bar 5 bar 6 bar 7 bar
85 108 126 142 158 174 192
Standard
Order Voltages
Discharge Capacity of DRAIN MASTER S (DM-50)
Working pressure
Peak load (l/h)
Voltage90~260Vac(Free Voltage) / 50~60Hz
24Vac 48Vac /24Vdc 48Vdc Order Voltages
Designation Heater Unit
Cable cross section Ø 6.0 ~ 8.0 mm; 3 x 0.75mm
Thermostatically controlled heating (Option)
Power Input 2.0 VA Fuse protection(normal lag) 0.5 A
24Vac.48Vac /24Vdc.48Vdc
EnE-DM50-E003
with heating unit and proper insulation; down to -25℃Edition:2013.01
Power 220Vac/50~60Hz/125W 110Vac/50~60Hz/125W
Operating Pressure(max) 25 bar
Order Ref. A DM00-1 A DM00-2
DIMENSION
DRAIN MASTER S (DM-50)
Condensate Auto Drain Trap DRAIN MASTER S
Subject to technical changes without prior notice, errors not excluded.
EnE-DM50-E003 Edition:2013.01
Technical Data Condensate Auto Drain Trap Standard
Model : DM-150
DRAIN MASTER S Condensate Auto Drain Trap
EnE-DM150-E003 Edition:2013.01
G3/4"(NPT 3/4")
Temperature (min/max)
IP 65
DM 150 CA
0.8 ~16 bar
Safety Class
Condensate Feed
Condensate Discharge G1/2"(NPT 1/2")
Venting Line
Model DM - 150 Order Ref.
340
.+1℃ ~ +80℃
3.9 kg
Working Pressure (min/max)
Scope of Application
Material
Housing
Condensate Auto Drain Trap DRAIN MASTER S
TECHNICAL DATA
Peak compressor Peak dryer Peak filter
Diaphragm
PCB Board Casing
Weight (empty)
G3/4"(NPT 3/4") x 3 point
Oil-Free Condensate or Oil-Contaminated Condensate
Aluminium, Hardcoated
NBR
AU
ABS
Green
m3/min
performance
m3/min
O-ring
170
Climatic zone
1700
performance
m3/min
performance
1 bar 2 bar 3 bar 4 bar 5 bar 6 bar 7 bar
180 210 240 275 310 352 400
Standard
Order Voltages
EnE-DM150-E003
Fuse protection(normal lag) Power Input 2.0 VA
*Green -Dry and cool climate(such as in Northern Europe, Canada, Northern states of the USA, Central Asia)
220Vac/50~60Hz/125W
25 bar
Heater Unit Designation
Order Ref.
Power
Cable cross section Ø 6.0 ~ 8.0 mm; 3 x 0.75mm
Operating Pressure(max)
A DM00-1
0.5 A
*Blue -temperate climate(such as in Central and Southern Europe, Central Americal)
with heating unit and proper insulation; down to -25℃
A DM00-2
110Vac/50~60Hz/125W
*Red -humid, tropical climate(such as in the coastal regions of South-East Asia, Oceania, Amazon and Congo regions)
Thermostatically controlled heating (Option)
Edition:2013.01
300
210
1500
1050
DM-150 150Blue
Red 105
Discharge Capacity of DRAIN MASTER S (DM-150)
Working pressure
Peak load (l/h)
Voltage90~260Vac(Free Voltage) / 50~60Hz
24Vac.48Vac /24Vdc.48Vdc
DIMENSION
DRAIN MASTER S (DM-150)
Condensate Auto Drain Trap DRAIN MASTER S
Subject to technical changes without prior notice, errors not excluded.
EnE-DM150-E003 Edition:2013.01
Condensate Auto Drain Trap DRAIN MASTER S
Technical Data Condensate Auto Drain Trap Condensate Auto Drain Trap Standard
Model : DM-500
EnE-DM500-E003 Edition:2013.01
DRAIN MASTER S
DM - 500DM 500 CA
TECHNICAL DATA
Condensate Auto Drain Trap
Model Order Ref. DM 500 CA
.+1℃ ~ +80℃
G3/4"(NPT 3/4")
Safety Class IP 65
Working Pressure (min/max) 0.8 ~16 bar
Temperature (min/max)
Order Ref.
Condensate Feed G3/4"(NPT 3/4") x 3 point
Condensate Discharge G1/2"(NPT 1/2")
Venting Line
6.0 kg
PCB B d C i
Condensate Discharge G1/2 (NPT 1/2 )
O-ring
Housing Aluminium, Hardcoated
Weight (empty)
Scope of Application Oil-Free Condensate or Oil-Contaminated Condensate
MaterialNBR
AU
ABS
Diaphragm
performance
m3/min
DM 500Green 570 1140
m3/min
Climatic zone
Peak compressor Peak dryer Peak filter
performance performance
m3/min
PCB Board Casing ABS
.
Blue
Red 350 700
*Red -humid, tropical climate(such as in the coastal regions of South-East Asia, Oceania, Amazon and Congo regions)
Discharge Capacity of DRAIN MASTER S (DM 500)
.
*Green -Dry and cool climate(such as in Northern Europe, Canada, Northern states of the USA, Central Asia)
*Blue -temperate climate(such as in Central and Southern Europe, Central Americal)
DM-500 500 1000 .
1 bar 2 bar 3 bar 4 bar 5 bar 6 bar 7 bar
400 460 520 590 670 750 850
Standard
Order Voltages
Peak load (l/h)
Voltage90~260Vac(Free Voltage) / 50~60Hz
24Vac 48Vac /24Vdc 48Vdc
Discharge Capacity of DRAIN MASTER S (DM-500)
Working pressure
Order Voltages
Thermostatically controlled heating (Option)
Designation Heater Unit
24Vac.48Vac /24Vdc.48Vdc
Power Input 2.0 VA Fuse protection(normal lag)
Cable cross section
0.5 A
Ø 6.0 ~ 8.0 mm; 3 x 0.75mm
EnE-DM500-E003
Operating Pressure(max) 25 bar
with heating unit and proper insulation; down to -25℃
Order Ref. A DM00-1
Power 220Vac/50~60Hz/125W 110Vac/50~60Hz/125W
A DM00-2
Edition:2013.01
DIMENSION
DRAIN MASTER S (DM-500)
Condensate Auto Drain Trap DRAIN MASTER S
Subject to technical changes without prior notice, errors not excluded.
EnE-DM500-E003 Edition:2013.01
Condensate Auto Drain Trap DRAIN MASTER S
Technical Data Condensate Auto Drain Trap Condensate Auto Drain Trap Standard
Model : DM-1500
EnE-DM1500-E003 Edition:2013.01
Condensate Auto Drain Trap DRAIN MASTER S
TECHNICAL DATA Model DM - 1500 Order Ref. DM 1500 CA Order Ref. DM 500 CA
Working Pressure (min/max) 0.8 ~16 bar
Temperature (min/max) .+1℃ ~ +80℃
Safety Class IP 65
Condensate Feed G3/4"(NPT 3/4") x 2 point, G1"(NPT 1") x 1 point
Venting Line G3/4"(NPT 3/4")
Condensate Discharge G1/2"(NPT 1/2")
Scope of Application Oil-Free Condensate or Oil-Contaminated Condensate
Condensate Discharge G1/2 (NPT 1/2 )
Weight (empty) 7.5 kg
Material
Housing Aluminium, Hardcoated
O-ring NBR
Diaphragm AU
PCB B d C i ABS
.
m3/min m3/min
DM 1500Green 1750 3500
Climatic zone
Peak compressor
performance performance performance
m3/min
PCB Board Casing ABS
Peak dryer Peak filter
Blue 1500
.
*Green -Dry and cool climate(such as in Northern Europe, Canada, Northern states of the USA, Central Asia)
Discharge Capacity of DRAIN MASTER S (DM 1500)
1050
*Blue -temperate climate(such as in Central and Southern Europe, Central Americal)
DM-1500 3000 .
Red 2100
*Red -humid, tropical climate(such as in the coastal regions of South-East Asia, Oceania, Amazon and Congo regions)
1 bar 2 bar 3 bar 4 bar 5 bar 6 bar 7 bar
950 1,150 1,320 1,400 1,460 1,580 1,700
Standard
Order Voltages
Working pressure
Peak load (l/h)
Voltage
Discharge Capacity of DRAIN MASTER S (DM-1500)
90~260Vac(Free Voltage) / 50~60Hz
24Vac 48Vac /24Vdc 48Vdc Order Voltages
Thermostatically controlled heating (Option)
Designation Heater Unit
O
0.5 A
Cable cross section Ø 6.0 ~ 8.0 mm; 3 x 0.75mm
Fuse protection(normal lag)
24Vac.48Vac /24Vdc.48Vdc
Power Input 2.0 VA
EnE-DM1500-E003
Power 110Vac/50~60Hz/125W
with heating unit and proper insulation; down to -25℃
Order Ref.
220Vac/50~60Hz/125W
Operating Pressure(max)
A DM00-2A DM00-1
25 bar
Edition:2013.01
Condensate Auto Drain Trap DRAIN MASTER S
DIMENSION
DRAIN MASTER S (DM-1500)
Subject to technical changes without prior notice, errors not excluded.
EnE-DM1500-E003 Edition:2013.01