+ All Categories
Home > Documents > Solar botanic (1)

Solar botanic (1)

Date post: 14-Aug-2015
Category:
Upload: chitrachedu-dada-kalandar
View: 28 times
Download: 0 times
Share this document with a friend
Popular Tags:
13
N.B.K.R INSTITUTE OF SCIENCE AND TECHNOLOGY Paper Presentation on SOLAR BOTANIC RENEWABLE ENERGY RESOURCE N.PRASHANTHI II ECE
Transcript
Page 1: Solar botanic (1)

N.B.K.R INSTITUTE OF SCIENCE AND TECHNOLOGY

Paper Presentation on

SOLAR BOTANIC RENEWABLE ENERGY RESOURCE N.PRASHANTHI II ECE 11AAU04066Ph.no:7382516553Email:[email protected]

M.SUMATHIII ECE11AAU04098Email:[email protected]

Page 2: Solar botanic (1)

ABSTRACT :

Energy resources are exhausting day-by-day. Now it’s very difficult to find new energy resources. But if we make effective use of renewable energy resources we can definitely decrease the rate of utilization of non-renewable energy resources. Some of these renewable energy resources are sunlight, wind and heat. In this we would present you a new way of generating electricity from nature. The energy system that we are going to explain is solar botanic renewable energy system.

Hydro energy-wind energy -solar parabolic energy-solar panel arrays-Bio fuels are all renewable energy applications.

• Expensive manufacturing

• High installation costs

• High maintenance Land spill

• Visual Pollution

• Environmental dangers

• Visual and Noise Pollutions

• Decrease in property and land value

• Building regulations

With new technologies available today we are addressing the above problems and provide a new and innovative solutions, that is cost effective and triple efficient

In this we can see how we can use today’s technology in a more responsible and efficient way without causing our planet more stress!

This is one of the green energy systems. By using the nanotechnology and photothermovoltaic we can we can produce electric power which can be used for charging of cars and other home appliances.

Page 3: Solar botanic (1)
Page 4: Solar botanic (1)

INTRODUCTION

Solar Botanic will introduce artificial trees that make use of renewable energy from the sun and wind, they are an efficient clean and environmentally sound means of collecting solar radiation and wind energy.

Here at Solar Botanic, we’ve amassed a wealth of information relating to Solar Botanic Trees and Nanoleaves and the field of photovoltaic thermo voltaic and piezovoltaic technology. You will be amazed how efficient our Trees are, how they make use of light, heat and wind and turn it into useable electricity for your home or car.

Biomimicry

The Art of Mimicking Nature’s Flawless Design

In this biomimicry concept our trees are fitted with Nanoleaves, a combination

of Nano photovoltaic- Nanothermovoltaic and Nanopiezo

generators converting light, heat and wind energy into green electricity.

Our Nanoleaves convert the complete solar spectrum converting visible light,

infrared and UV in combination with piezo electric generators that convert wind energy into electricity providing you with efficient, cost effective and

aesthetic solutions, providing maximum electric power. The area of combined

photothermovoltaic with piezovoltaic is concerned primarily with converting

sunlight and wind energy into electricity. This task is accomplished through the use of natures design, artificial trees shrubs, plants and

flowers all equipped with nanoleaf technology PV cells.

For Homes

Drastically lower your electric bill and add lasting value to your home.

Solar Botanic residential solutions offer up to 50% more power than conventional solar systems, and our Green trees and shrubs blend in beautifully with your environment.

For Businesses

Take control of your energy costs, a natural solution to solve your rising electricity rates and reduce the impact on our environment.

With government incentives and tax credits now widely available, a Solar Botanic power tree system is a financially sound investment that can pay dividends long into the future.

Large Commercial for Urban and Rural applications

solar products, Solar Botanic is the right choice for your City, Neighbourhood, or

Page 5: Solar botanic (1)

large-scale With solid performance and the highest-efficiency green energy project. Solar Botanic solar systems can be deployed on ground, roof, or parking structures.

• Broad Leaf trees- These species can provide between 3500kWh and 7000kWh per year. They offer an abundance of added value: providing shade, cooling the air, green ambiance and much more. Installation is quick. The trees are durable and natural looking, to fit any environment. Also, they are flexible, similar to an original tree, and well secured to the ground with our Octopus root system.

• Ever green trees- These species can provide between 2500kWh and 7000kWh per year. They can be placed as single trees or to fence garden properties. Also for mountainous regions and hill sides, very good noise and sound abatement.

• Shrubs, Plants, Roof, Wall and Fencing- A wide range of shrubs for all your electrical needs. Our SolarBotanic Nanoleaf roof Carpets can be installed in minutes on any roof design, various leaf and vegetation designs available. Our SolarBotanic Wall carpets, easy to apply, you can cover unsightly walls, or apply it as fencing and generate electricity, creating a natural ambiance in a matter of minutes. Various leaf design available, We have energy solutions for the future.

Our products come with a guaranteed international quality

control and assurance specification.

Power Trees & Shrubs

Discover why our Trees and plants are so much more than other renewable energy systems. Depending on size and location, a tree can produce between 2000 and 12,000 kWh per year.

Smart solutions

Let SolarBotanic’s comprehensive application portfolio help you to find the best place for your trees, greater productivity and better scenic values.

Urban & Rural applications

Increase the green awareness in your city, help to reduce global warming, bring energy closer to home, recharge your car and power your home.

Page 6: Solar botanic (1)

Latest nanotechnology for our leaves

The Nanoleaf is a combination of high Tec materials brought together in a leaf design to convert all 3 energy sources; Light, Heat and Wind into electricity, our trees are a quantum source of power and an excellent electricity provider.

Solar Botanic products will be

multifunctional, efficient, renewable energy systems. Within our collection, you'll find a host of special options and

features designed to bring energy efficiency and beauty to your home.

Solar Botanic products will be top-quality multi energy collectors with maximum power output day and night that are installed by our contractors. The SolarBotanic energy trees range from 2.000 to 12.000 kWh per year power output, so you can find the right tree, shrub or plants with the right features at the right price.

This unique and efficient product that will make use of natures perfect design features will be sold exclusively by SolarBotanic and officially appointed dealers only. Products will be available in broadleaf and needle trees, shrubs, flowering plants and water based

plants, each includes specific features and options for a true natural product, and are specially designed for maximum energy efficiency in every climate.

Designed according to nature, that allows this product to be installed within cities, rural communities, and places of natural beauty and island communities, for use in new and existing residential projects without causing a negative impact. Each product with its unique features is designed to be well-matched with certain types of local scenery.

SolarBotanic products are designed and engineered for use in all areas and to withstand extreme weather conditions, they will comply with safety regulationsthat vary from area to area. Every SolarBotanic product is engineered for superior performance, maximum power efficiency and long-lasting beauty.

Nanoleaves Sun, wind, water, earth and life touch our living senses immediately always, everywhere and without any intervention of reason. They simply are there in their unmatched variety, moving us, our moods, memories, imaginations, intensions and plans.

To capitalize on the wealth of designs and processes found in nature, engineering and technology gave us the ingredients, creative thinking, and unique solutions made it possible to bring all this together into a natural looking leaf - the Nanoleaf.

To complete the tree for multi energy exploitation, the petiole twigs and branches are incorporated with Nano piezo-electric elements. A Nanoleaf is thin like a natural leaf, when outside forces, like the wind pushes the Nanoleaf back and forth,

Page 7: Solar botanic (1)

mechanical stresses appear in the petiole, twig and branches. When thousands of Nanoleaves flap back and forth due to wind, millions and millions of Pico watts are generated, the stronger the wind, the more energy is generated.

Our Nanoleaves only reflect a small part of the sunlight that strikes them, mostly the green light, and the rest of the spectrum is efficiently converted into electricity.

Besides converting the visible spectrum of light, our Nanoleaves also convert the invisible light, known as infrared light or radiation, we can't see it, but we can feel it - it's warm - that's why we call it radiation. Due to the unique combination of photovoltaic and thermovoltaic in our Nanoleaves it converts this thermal radiation into electricity, even hours after the sun has set.

The more wind there is,the more Nanoleaves are moved. Wind that is moving thousands of Nanoleaves in a tree canopy are causing mechanical strain in the petiole, twigs and branches. Nano piezo-electric elements incorporated in the petiole twigs and branches are the tiny Nano piezo-electric elements that will generate millions and millions of Pico watts as these thousands of Nanoleaves flap

back and forth due to wind. The stronger the wind, the higher the "flap" frequency, and therefore the larger the watts generated in the petiole, twigs and branches.

With the progress in nano technology, the photovoltaic, thermovoltaic and piezo electric materials are becoming more efficient and combined in one system it will give our products more efficiency and we believe that soon, Solar Botanic will be a mainstream green energy provider, more reliable/cheaper and above all better looking.

PIEZO ELECTRIC ENERGY GENERATOR

Page 8: Solar botanic (1)

Advantages: 1.Absorbing CO2 from air Another fascinating Solar Botanic technology is used to separate the carbon di oxide from other elements in the air.it involves biomimicry of human lung.

make use of a Norwegian invention that uses a membrane that filters the air through a liquid solution. The membrane is separating the CO2 from the air. If we look at a tree and the canopy of a tree, the outer periphery will be having air nozzles for air intake. This will be incorporated in the branches. Then the air will be blown down into the main trunk of the tree where it will go through the membrane and the clean air will be released through the top of the tree. This is a very nice application which is really good for air pollution affected cities.

2. .Low investment/high return A tree of approximately 7 – 8 meters high and a tree canopy diameter of 6 meters that would deliver per year between 5000 and 7000 killowatt hours and it should come at a price of around 5,000 dollars.

3.Efficient Power Generation 189,000 solar trees "planted" along the road of 2700 kms long would generate over 1.2 GW of electricity; reduce our carbon footprint by more than 900 thousand tons of CO2 per year and produce enough electricity to power over 118,000 average size homes.

4.Triple efficiency.

5.Durable.

6..Easy to install.

7.Weather resistant: rain, hail dust, lightning, wind.

8.Good monetary values for private homes.

Page 9: Solar botanic (1)

9.Various sizes, colors and species

10.Aesthetic natural design, in harmony with nature.

11.Application for designer gardens, penthouses, balconies

APPLICATIONS: • Urban and Rural

• Recreational parks, city parks

• New housing estates

• Golf courses and resorts

• Mountainous regions

• Coastlines

• Highways

• Airports

• Deserts

• Penthouses, balconies, verandas

• Private gardens

• De-forested areas

• Areas of commercial interest; Islands, nature resorts

• Ponds, lakes, seas and oceans

• Crop Protection

• SolarBotanic flowering plants to harvest colorful your electric power

SolarBotanics can be used for: Windshield, Shade, anti glare, objectionable views,sound barrier, windbreak, wind obstruction and much more.

CONCLUSION;

HENCE THIS A CLEAN AND CHEAPEST POWER GENERATION. THIS IS AN ECO-FRIENDLY POWER GENERATION METHOD.THIS IS ONE OF THE GREEN ENERGY SYSTEMS

Reference: www. solarbotanic .com

www.energymatters.com. WWW.ENERGYHARVESTING.NET

WWW.TI.COM

Devices for Recharging Batteries HENRY.A

Elements of ecology – ROBERT SMITH


Recommended