3260 contacts. 4 terminal strips, 7 buss strips, 4 binding posts mounted on an aluminum back plate 7 7/8" x 8 3/4” x 3/8” high. CAT# PB-3260 $32.00 each
Design and change circuits quickly and cleanly.Bread-boards accommodate all sizes of dips anddiscrete components with lead diameters up to0.032". Interconnect with solid hook-up wire (#22 AWG recommended). Wires & componentscan be used & re-used many times without damage to board or components.
170 Contacts. 1.80” x 1.40” x 0.375” high.CAT# PB-170 $2.50 each10 for $2.00 each
SOLDERLESS BREADBOARDS
FAX YOUR ORDER 24 HOURS A DAY (818) 781-2653
JUMPER WIRE, 10 PACKS
Machine pins for easy insertion and extraction. Can be reused many times without distortion ofpin. Color-coded by length. Sold in packs of 10. 50MM (2”) Brown wire Male-Male AWG 24CAT# JMM-50 $3.00 / 10 pcs
100MM (4”) Orange wire Male-Male AWG 24CAT# JMM-100 $3.35 / 10 pcs150MM (6”) Multi-color Female-Female AWG 26CAT# JFF6-10 $2.00 / 10 pcs
72
JUMPER WIRE SETSPre-formed jumper wires for use with solderless breadboards. 14 color-coded lengths. AWG 22 solid wire. Unbreakable clear plastic storage case.
140 PIECE ASSORTMENT10 of each size CAT # JW-140 $6.25 each
350 PIECE ASSORTMENT25 of each size CAT # JW-350 $12.95 each
BREADBOARD ACCESSORIES
400 contacts. 300 contacts on main board and 50 contacts on each of two power distribution strips. Distribution strips are removable. CAT # PB-400 $4.00 each
470 contacts plus two 70 contact buss strips, for a total of 610 contacts.3 binding posts mounted on aluminum back plate, 5.92” x 3.75” x 0.43” high.CAT# PB-610 $12.50 each
840 contacts. Dual row of buss terminals on each side of terminal strip. Double-sided adhesive tape backing. 2.2" x 6.5" x 0.38" high.CAT# PB-850 $6.50 each
1680 contacts. 2 terminal strips, 4 buss strips, 3 binding posts mounted on an aluminum back plate 5 1/8" x 6 7/8" x 3/8” high. CAT# PB-1680 $15.95 each
840 contacts. Dual row of buss terminals on each side of terminal strip. Double-sided adhesive tape backing. Holes for screw mounting. 2.2" x 6.5" x 0.38" high. CAT# PB-840 $7.65 each
Terminated with machine pins for insertion intobreadboards and sockets.
ALLIGATOR CLIP JUMPERS6-PIECE SETCAT# TL-14$5.95 per set
MINI-GRABBER JUMPERS 2-PIECE SETRed and black mini-grabbers.CAT# TL-15$3.65 per set
BATTERY HOLDERHolds 3AA batteries for 4.5Vdc power. Completely enclosed. Integrated on-off switch. 6” leads.CAT# BH-AA3 $3.95 each
Simplify projecting and proto-typing with this triple-output power supply and solderless 2420 tie point breadboard. 1 fixed and 2 adjustable supplies, 5 bus strips and 3 plug-in strips for DIP and other components. Features:DC power supplies:5Vdc @ 1.5 Amp fixed0-15Vdc @ 500mA adjustable0-15Vdc @ 500mA adjustable Input: 120/ 240Vac @50-60HzOverload & short-circuit protection.Detachable AC power cord.10.75" x 8.75" x 3.25". 6 lbs. CAT# PB-4060 $138.00 each
POWERED BREADBOARD
Plugs into our solderless breadboards (except CAT# PB-170) and provides 5V or 3V power to the rails. Also provides an on-off switch, power indicator LED, a USB port and extra header pins for 3V and 5V powertaps. Maximum output current: 700mA. Coax jack(2.1mm id) for power input. Requires a 6.5 - 9 Vdcpower supply. 1.26 x 2.08 x 0.86" h.CAT# MB-PS $6.75 each
BREADBOARD POWER SUPPLY
TEST LEADS WITH PIN PLUGSSet of red and black test leads with pin plugs. 22" long cables.CAT# TL-112 $1.85 set
ECONOMY TEST LEADSRed and black lead set with banana plug on one end & pin probe on other end. 3 ft. long. CAT# TL-100 $2.50 per set
TEST CABLES & CLIPS
TEST CABLES4' RG-58U coax cable.BNC male to red & black insulated alligator clips. CAT# TL-11 $5.50 each
BNC male to red and black mini-grabbers.CAT# TL-12$6.75 each
Mini-hooks are great for connection to parts in high-density areas. They give a firm, insulated connection
MINI-HOOK JUMPERS & PROBES
MINI-GRABBER TEST CLIPS, BLACK/RED1.65" mini-clips. Mini-hooks provide a firm, insulated connection to small terminals and wires in high-density areas.CAT# MTC-7 $1.80 per pair
REGULAR JUMPERS5 TEST LEADS - 2" CLIPSCAT# HDTL-5$2.50 each
ALLIGATOR CLIPS
2” ALLIGATOR CLIPSolid, spring-action clip with screw. 5mm cable access hole can connect to banana plug test lead.CAT# ALG-M 30¢ each 10 for $2.70 • 100 for $24.00
MOST ORDERS SHIPPED WITHIN 24-48 HOURS 73
MICROGRABBER TEST CLIP W/ 0.025” (.64MM) PINPomona Grabber® 4521-0 Black 1.73” glass-filled Nylon test clip. 0.025” (0.64mm) square pin. Mates with patchcords equipped with appropriate receptacle. CAT# MTC-9B $2.00 ea. • 10 for $1.75 ea.
SET OF TWO 1 1/2" MINI HOOK JUMPERS Two 18" long mini-hook patch cords. One black, one red, with 1.5" long mini-hooks on each end. CAT# MTC-2 $3.25 each
2” MINI-HOOK JUMPERSFive 18" long mini-hookpatch cords. Black, red, white, green and yellow. CAT# MTC-5set of 5 for $6.95
INSULATED ALLIGATOR CLIPSSmall, medium and large alligator clips with rubber boot. Sold in pairs, one red and one black.1.07" alligator clips CAT# ALG-1065¢ per pair • 100 for 50¢ per pair
1.4" alligator clips CAT# ALG-15 75¢ per pair • 100 for 60¢ per pair
1.75" alligator clips CAT# ALG-2085¢ per pair • 100 for 70¢ per pair
MINI JUMPERS10 TEST LEADS - 1" CLIPS 2 each of 5 colors. CAT# MTL-10 $2.95 per set
CLIP JUMPERS
HEAVY-DUTY JUMPERS 10 jumpers, 5 colors, 32" long. 1.75" clips with stronger jaws.CAT# HDTL-10 $5.40 each
INSULATION-PIERCING TEST CLIPSJS Popper, Inc. #JP-8681 Famous "Bed-of-Nails" test clip designed for use with smaller gauge wires. Angled nose. 2.6" long. Includes rubber boots. These are new clips, removed from unused test leads. Includes twoclips with one red and one black boot.CAT# ALG-34 $6.50 pair
NEW
Facilitates retrieval of small metal parts. Adjustable. Extends to 23” overall length.CAT # MAG-31 $2.50 each
TELESCOPING MAGNET
Instant diagnosis of 4-pair, twisted-pair and coaxial cables for continuity, opens, shorts, reversed, transposed and split pairs. Detachable remote unit for installed cabling. For cables with RJ-45 or coaxial BNC connectors. Requires 9 Volt battery.CAT# CT-28 $8.50 each
LAN/PHONE CABLE TESTER