Solid / Liquid Level Measurement for Field ApplicationPneumatic Vibrator/Air Shocker SolutionTemperature Controller/ Counter /Digital Panel Meter

FF Series

Max. Operating Temperature: 350BCWetted parts available with stainless steel and plastic.Housing available with explosion proof and anti-corrosive.Agency Approval: ABS, GL, CE, NEPSI (EEx d)

Side Mounting Float Switch

FG Series

Output available with loop power and 3 wire resistanceResolution: A6.35 mm, A12.7 mmHousing available with explosion proof and anti-corrosiveAgency Approval: ABS, GL, CE, NEPSI (EEx d )Enclosure protection: IP65, EEx d llB T4Measuring range: max. 6M.

Magnetic Float Level Transmitter

FA/FB Series

Float material available with plastic and stainless steelMicro switch, Proximity Switch, Reed Switch and Mercury Switch availableSimple installation and durable

Cable Float Level Switch

FC/FD Series

Custom-made multi-point control, easy installation, reliable performanceHousing available with explosion proof and anti-corrosiveMax. Operating Temperature: 200BC for stainless steelApplication:liquid processing, heat exchanger, hydraulic, power plant, oil, shipbuilding & petrochemical Industries

Magnetic Float Level Switch

FC/FD Series

Compact simple design with high reliability, and low priceDifferent mounting optionsDifferent connection typesApplication: water fountain, machinery, electrical, chemical, marine, test instrument, food machinery, washer, air condition, hydraulic machine

Mini Float Level Switch

EF Series

Heating jacket installation availableHigh temp. up to 400BCHigh pressure up to 130 Bar

Material SUS316, PVDF, PP, Titanium

Accuracy: A6.35mmOutput: 4~20mA

By-pass Level Transmitter

- :ISO 9001 2000 Certified

MEF Series

Mini By-Pass Level Transmitter

Visible level indication Safer than glass type of level gauges Smart volume allows easy installation. Magnetic Switches can be installed and adjusted to control Low Level and High Level Alarms. Level Transducer can be installed to convert level into 4-20mA analogue signal.

ATEX

ATEX

ATEX

SE Series

Torsion adjustable for light materialClutch assembly to protect the motor Good shaft seal designedTemperature up to 200BCVarious power supply selectableUnique sealing ring design to protect dust permeationApplication:suitable for chemical, food, mining, plastic, ceramic industries

Rotary Paddle Level Switch

ATEX

SB Series

ticky, viscosity applicationMax. Operating Temperature: 550BCTime delay & ground level test function available

Suitable for s

RF-Capacitance / Admittance Level Switch

ATEX

SA Series

Ground Level Test Function availableMax. Operating Temperature: 800BCSensitivity and time delay adjustable

Capacitance Level Switch

EC Series

Designed for complete submersibilityUnique cable seal system ensures water tight integrityPressure range: 0.1~400 BarAccuracy: 0.3%FS, 0.5%FSOutput: 4~20mA or 0~10VdcZero & Span adjustment

Pressure Level Transmitter

- :ISO 9001 2000 Certified

SC Series

Vibrating Probe Level Switch

SC Series

Tuning Fork Level Switch

EC3 Series

Accuracy: ±0.075%~±0.1%Rate of Measuring Range: 100:1Capacitance Sensor is applied to enhance over-pressure resistance capacity. Available with various diaphragm materialsMeasurement: Meter Pressure, Absolute Pressure, Negative PressureOutput: 4~20mA / 2-wire6-digits LCD DisplayCalibration can be done through RS485 or HART.

Digital Differential Pressure Transmitter

Glass window allows visible observation of the Power Supply and Output, without the need to remove the cover of the enclosure (SC3 series).Dual Insulation to prevent damage on PCB by moisture (SC3 series)Power Supply: 20~250Vac/Vdc, 50/60HzOutput: SPDT Relay, SSR MOSFETNo calibration required. Ease of use, rugged design High/Low failure safe modes. Safe and reliable operating

ATEX

Glass window allows visible observation of the Power Supply and Output, without the need to remove the cover of the enclosure (SC3 series).Dual Insulation to prevent damage on PCB by moisture (SC3 series)Power Supply: 20~250Vac/Vdc, 50/60HzOutput: SPDT Relay, SSR MOSFETNo calibration required. Ease of use, rugged design High/Low failure safe modes. Safe and reliable operating

ATEX

LR Series

Loop power operation Universal display unit for all 4~20mA transmission circuitsWork with standard DIN 43650 plug4 Digit LCD display, free scaling of display value3-keys operation 4~20mA,10~50mA ranges

Loop Power Indicator

EG Series

Absolute position measurementExcellent resolution and repeatabilityVoltage, current and RS485 outputsField adjustable zero and span settings(analog only)Fast response time , High reliable performance of 0.01% F.S. resolution, with 0.1% F.S. LinearityEnclosure IP-67 ratingApplication:LPG liquid medium, pharmaceutical / beverage chemical process

Magnetostrictive Level Transmitter

EE Series

Microprocessor based controllerStandard measuring range of 45M, with maximum of 70M availableDifferent types of sensing weights to choose fromAlarm output for sensing probe buried andprobe wire broken conditionApplication:ore, clinker, coal, cement, grain, plastic powder, feedstuffs, granule, and any liquid

Electromechanical Level Measuring System

EA Series

Non-contact operation ensures readingswill not be affected by material character (such as pressure, viscosity, density)Liquid measuring range max. 50M, Short Range 5M availableSolid measuring range max. 35M, Short Range 5M availableLevel, distance, flow volume displayfunction selectable

Ultrasonic Level Transmitter

ATEX

ATEX

EB Series

Max. Tensile strength of wire (f9mm) can up to 3.5 Tons and 50M in lengthSensitive range: 150pf, 500pf, 1500pfHigh temp. Up to 200BCUnaffected by pressure, sound wave temperature

Operating Voltage: 24Vdc; max.Output current: 4~20mA, resolution: K2%

RF-Capacitance Level Transmitter

JFR Series

Non Contact MeasurementWith LCD Display, User Friendly CalibrationAvailable for High Pressure, High Temp.High Viscosity Fluid, Dusty EnvironmentIntrinsic Safety and Explosure ProofMeasuring Range 0.5m~40mWireless & PROFIBUS Supported

Radar Level Transmitter

ATEX

- :ISO 9001 2000 Certified

SF Series

perating Temp: 30~150BCContact Rating: 60W/220Vdc SPDTOperating Pressure: 355 PSI

O

Paddle Type Flow Switch

SP Series

ater: 1~150 cm/s, oil: 3~300 cm/s

Application:water power plant, HVAC system, steel marking, petrochemical,food process, pharmaceutical, semiconductor, cooling pipe

Open collector alarm outputMeasuring Range: (Speed)wMaterial: SUS304, 316, PVDF, PPNo moving parts to cause wear and tear

Thermal Dispersion Flow Switch

SD Series

NPN, PNP open collector output to energize relay or PLCOuter material of PC, Polysulfone, SUS304/316 for acidity and alkaline; applicable in grease, waste water, liquid solution, liquor, alcohol....etcOver-current and reverse polarity protectionLED status indicationApplication:liquid leakage detection motor/pump protection

Optical Level Switch

- :ISO 9001 2000 Certified

LMS Series

Stable system framework thanks to ARM embedded system Full Color Touch LCD display to show 4 tanks information at one timeOne data management center to control and monitor level information of numerous tanksSimultaneous tank data monitoring chart Automatically calculate non-linear compensation of all types of tanksEquipped with Intelligent Automatic Internet Alarm technique, tank data are sent by SMS through GSM.

Level Measurement System

MMS Series

MMS accumulates tanks data from level instruments that are equipped with RS-485 interface and then data are transmitted to the main computer. Data being transmitted includes Measuring Distance, Analogue Output Setting, Distance / Level, Tank Height Setting, Zero Point Setting, High Alarm Setting, Low Alarm Setting, Error Alarm (plumb buried, cable break), Communication Mode Setting, Communication ID Setting, Baud Rate Setting, Communication Format Setting, etc.

Materials Management System

SQ Series

Robust In Any Severe ApplicationCustomized Body Housing(steel, Sus316, Brass)Selectable Contact(gold Contact Or Silver Contact)Screw / Push-on Terminal Contact SelectableHigh Quality And Cost EffectiveAdjustable Pressure Range Setting

Pressure Switch

PS Series

Adopted multi-control function allows the system to response simultaneously. Specially designed circuit structure, working performance will not be affected even in a severe environment. Free of battery. Data are kept permanently without any power/electricity needed, and it is possible to introduce the setup input parameters of the machine. Specially designed circuit enhances stability of the system.

Cloth Seam Detector

TS Series

Key pad lock with password to avoid unexpected dialingDelay startOverload delayRS-485-Modbus communication interface

Multi-function Temperature And Speed Safety Meter

BAS/BAH/BVP Series

Highly strengthened aluminum bodyLow frequency/ continuous impact model, sudden activation/ deactivation is allowedFrequency and amplitude of impact can be adjusted as requiredDirect impact onto target object to produce the optimum vibration feedback

Air Hammer

ED Series

Maximum monitoring range 1~999rpm.7-seg led display 0~999Alarm monitoring: low speed, stop, reverse, blackout and overloadStart up delay function allow motor to run up graduallyAlarm delay function to avoid false alarm, which may be caused by temporary slow down or load change

Speed Monitor

AE610/620 Series

Programmable Vibrating Controller

- :ISO 9001 2000 Certified

AE610/620 Series

BVK/BVR/BVT Series

Special aluminum alloy, small size, light weightFine enclosure protection can be applied in high humidity dust working areaFrequency and amplitude of vibration can be adjusted as requiredLow price and durable

Pneumatic Vibrator

Specially designed for universal application modesFunctions are controlled by microprocessor. 1~10/ 20 OutputUsers can choose the best application mode based on the natures of the equipment and material detected.Applied in sequential controller of vibrators

SRT Series

Contact rating: 10A/250VacFor Protection of Belt Conveyors and Personnel

Conveyor Belt Misalignment Switch

SRS Series

Contact rating: 10A/250VacFor emergency or normal shut-OffPull force: 5Kg

Safety Cable Pull Switch

AE611/621 Series

Programmable Sequential Controller

Controller for Dust Collector System

AE Series

Diaphragm Valve

BRD Series

Fast response, large flow volume,

good reverse cleaning affect, less air

consumption

Available with 3/4", 1-1/2", 2", 2-1/2", 3"

Material: Aluminum, Stainless Steel

- :ISO 9001 2000 Certified

Accessories of Diaphragm Valve for Dust Collector

BDB Series

Connector:

Convenient for users to install ash

cleaning system on the dust collector

Free from welding process during

installation, and allows easy removal for

maintenance purposes

Remote Solenoid Enclosure

Working Liquid: Air

Diaphragm Material: NBR

Operation Temp.: -20~85BC

Remote Solenoid Pilot:

Designed by microprocessor to control solenoid pilot2 sets of digital displays to indicate the next cleaning spot in the bag, and also indicate how much time left for cleaning next bagJet pulse timing, jet pulse interval, and control points of the solenoid pilot are adjustable. Circular cleaning continues even whenthe machine is shut down. Setting can be done through the buttons of the control panel.

Jet pulse timing of sequential controller: 0~0.2 secondsJet pulse interval: 2~180 secondsNo switch contact in the circuit, operating life is half-eternity. Power supply: 110/220Vac, 24VdcControl points: 10, 20, 40 points

[SF] Paddle Flow Switch

[FC/FD] Mini Float/Magnetic Float Level Switch

[SD] Optical Level Switch

[FA/FB] Cable Float Level Switch

[FF] Side Mounting Float Switch

[SB] RF-Capacitance / Admittance Level Switch

[SE] Rotary Paddle Level Switch

[SC] Vibrating Probe Level Switch

[SC] Tuning Fork Level Switch

[LR] Loop Power Indicator

[SA] Capacitance Level Switch

[SP] Thermal Dispersion Flow Switch

[EC] Pressure Level Transmitter

[ED] Speed Monitor

[PB/PM] Microprocessor Based Bargraphic Display Scaling Meter

[BRD/AE] Valve and Controller for Dust Collector System

[EB] RF-Capacitance Level Transmitter

[FG] Magnetic Float Level Transmitter

[EG] Magnetostrictive Level Transmitter

[EA] Ultrasonic Level Transmitter

[EF] By-Pass Level Transmitter

[MEF] Mini By-Pass Level Transmitter

[BAS/BAH/BVP] Air Hammer

[BVK/BVR/BVT] Pneumatic Vibrator

[JFR] FMCW Radar Level Transmitter

[EE] Electromechanical Level Measuring System

[SRT/SRS] Conveyer Belt Misalignment Switch &

Safety Cable Pull Switch

08-ALL01-B1-ED, 10/05/2011-4000-JW

Distributor:

[FA/FB]

[PB]

[EG]

[SF]

[EF]

[JFR] [FC/FD]

[EC]

[FF]

[SA]

[EB]

[EA]

[FG]

[SP]

[SC]

[SB]

[FC/FD] [SD]

[LR]

[EB]

[SE]

[PB/PM]

[EB]

[EE] [EA]

[BAS/BAH/BVP]

[BVK/BVR/BVT]

[EB]

[SA]

[SB]

[SC]

[SC]

[SC] [JFR] [SE]

[SB]

FineTek Co., Ltd.

TEL: 886 2 2269 6789 FAX: 886 2 2268 6682Email: info@fine-tek.com http://www.fine-tek.com

Taichung Branch TEL: 886 4 2465 2820 FAX: 886 4 2463 9926Tainan Branch TEL: 886 6 289 0635 FAX: 886 6 289 4073Kaohsiung Branch TEL: 886 7 333 6968 FAX: 886 7 536 8758

Fine automation (ShangHai) Co., Ltd.No.451 DuHui Rd, MinHang District, Shanghai, China 201109TEL: 86 21 6490 7260 FAX: 86 21 6490 7276Email: info.sh@fine-tek.com

FineTek Pte Ltd.

FineTeK GmbHFrankfurter Str. 62, OG D-65428 Ruesselsehim, GermanyTEL: 49 6142 17608 0 FAX: 49 6142 17608 20E-Mail: info@fine-tek.de

Aplus Finetek Sensor inc.355 S. Lemon Ave, Suite D, Walnut, CA 91789Tel : 1 909 598 2488 Fax : 1 909 598 3188Email: peter.wu@aplusfine.com

No.16, Tzuchiang St., Tucheng Industrial Park, New Taipei City 236, Taiwan.

No. 60 Kaki Bukit Place, #07-06 Eunos Techpark 2 Lobby B, Singapore 415979TEL: 65 6452 6340 FAX: 65 6734 1878Email: info.sg@fine-tek.com