LARGE CAPACITY GRINDING AND MACHINING FACILITY INCLUDING HYDRAULIC SURFACE GRINDERS TO 56” X 196”, ROTARY SURFACE GRINDERS TO 60”, CNC VMC’s, PLANER MILLS, BRIDGE CRANES TO 25 TON AND SUPPPORT EQUIPMENT LARGE CAPACITY GRINDING AND MACHINING FACILITY INCLUDING HYDRAULIC SURFACE GRINDERS TO 56” X 196”, ROTARY SURFACE GRINDERS TO 60”, CNC VMC’s, PLANER MILLS, BRIDGE CRANES TO 25 TON AND SUPPPORT EQUIPMENT See Instructions on Page 2 To Become a Qualified Bidder on the Internet Large Capacity Machine Centers to 40” X 120” Capacity (2) Free Standing Crane Systems to 25 Ton Large Capacity Surface Grinders in Sizes to 56” Wide, 240” Long and 48” High Sale Under The Management Of CINCINNATI INDUSTRIAL AUCTIONEERS auctioneers | appraisers | since 1961 | cia-auction.com | [email protected]2020 Dunlap St., Cincinnati, Ohio 45214 Phone 513-241-9701 Fax 513-241-6760 Assets From Bankruptcy SOLON INDUSTRIAL GRINDING SOLON INDUSTRIAL GRINDING 1400 Miller Parkway – Streetsboro, Ohio 44241 20 Miles Southeast of Cleveland, Ohio SALE DATE: TUESDAY, MARCH 5TH, STARTING AT 10:00 AM SALE DATE: TUESDAY, MARCH 5TH, STARTING AT 10:00 AM INSPECTION: MONDAY, MARCH 4TH FROM 10:00 AM TO 4:00 PM RARE OFFERING OF LARGE CAPACITY SURFACE GRINDERS
Transcript
LARGE CAPACITY GRINDING AND MACHINING FACILITY INCLUDINGHYDRAULIC SURFACE GRINDERS TO 56” X 196”, ROTARY SURFACE GRINDERS TO 60”,CNC VMC’s, PLANER MILLS, BRIDGE CRANES TO 25 TON AND SUPPPORT EQUIPMENT
LARGE CAPACITY GRINDING AND MACHINING FACILITY INCLUDINGHYDRAULIC SURFACE GRINDERS TO 56” X 196”, ROTARY SURFACE GRINDERS TO 60”,CNC VMC’s, PLANER MILLS, BRIDGE CRANES TO 25 TON AND SUPPPORT EQUIPMENT
See Instructions on Page 2
To Become a Qualified Bidder on the Internet
Large Capacity Machine Centers to 40” X 120” Capacity (2) Free Standing Crane Systems to 25 Ton
Large Capacity Surface Grinders in Sizes to 56” Wide, 240” Long and 48” High
SALE DATE: TUESDAY, MARCH 5TH, STARTING AT 10:00 AMSALE DATE: TUESDAY, MARCH 5TH, STARTING AT 10:00 AMINSPECTION: MONDAY, MARCH 4TH FROM 10:00 AM TO 4:00 PM
RARE OFFERING OF LARGECAPACITY SURFACE GRINDERS
1338774C CIA Solon-6 2/8/13 12:30 PM Page 3
TUESDAY, MARCH 5THTUESDAY, MARCH 5TH
SURFACE GRINDERS56” X 48” X 196” Mattison HydraulicSurface Grinder; S/N 23779, 192” X-Axis Travel, 60” Y-Axis Travel, 48” Max.Under Full 36” Dia. Wheel, Machine has (7)26” X 56” Individual Chucks w/ 2-1/2”Spacing Between Chucks, 10” WideGrinding Wheel, 150 HP Spindle Motor,Coolant System, Approx. 155,000 Lbs.Max. Weight, Spindle May Have BeenRebuilt in 1997 SEE PHOTO36” X 240” Thompson HydraulicSurface Grinder; S/N T20CXV646766,5” Wide Grinding Wheel, IncrementalDown-feed, Encyclon Cyclonic FiltrationSystem, 40 HP Spindle Motor, CoolantSystem, Auxiliary Grinding Head forSecondary Operation e.g. Dovetail Grinding
SEE PHOTO20” X 120” Thompson HydraulicSurface Grinder; S/N 10CV656995, 6”Wide Grinding Wheel, Incremental Down-feed, 20 HP, Auxiliary Grinding Head forSecondary Grinding Operation CoolantSystem SEE PHOTO26” X 120” Thompson HydraulicSurface Grinder; S/N 10C0835, 18” Dia.V-Shaped Grinding Wheel, IncrementalDown-feed, Coolant Tank, 25 HP Spindle,Coolant System24” X 96” Hill Hydraulic SurfaceGrinder; S/N 120, 25 HP Spindle,Incremental Down-feed, Coolant System12” X 48” Thompson SurfaceGrinder; S/N 4C0690, 3” Grinding Wheel,Incremental Down-feed, 15 HP10” X 15” Gardner HorizontalSurface Grinder; Hand Feed WalkerChuck Control
6” X 18” DoAll Model D-6 SurfaceGrinderSeveral Hundred Various Size Newand Used Grinding Wheels12” X 36” Gallmeyer & LivingstonModel 550 Horizontal HydraulicSurface Grinder; S/N 550185, 12” X 36”Electro Magnetic Chuck, IncrementalDownfeed, Coolant System
42” Toshiba-Shibaura Model KRTC-11A Rotary Surface Grinder; S/N 5.02,50 HP Spindle Motor, Segmented Wheel,Automatic Down-feed, CurrentlyDisassembled
16” Blanchard Model 11 Auto FeedRotary Surface Grinder; 15 Hp
Several Hundred New and UsedSegmented Grinding Wheels
SEE PHOTO
16” Heald Model 261 PrecisionRotary Surface Grinder; S/N 43889,16” Diameter Electro Magnetic Chuck,Coolant System
20” X 120” Thompson Hydraulic Surface Grinder
36” X 240” Thompson Hydraulic Surface Grinder
56” X 48” X 196” Mattison Hydraulic Surface GrinderSeveral Hundred New and Used Segmented Grinding Wheels
WEBCAST BIDDER INSTRUCTIONS➢ All Internet bidders must register for this auction at
www.bidspotter.com at least 48-Hours Prior to the Sale Date, if youdo not you will not be approved.
➢ All Internet bidders must Post a Deposit of Approx. 25% of YourPlanned Spending Budget or $5,000.00 Minimum with CincinnatiIndustrial Auctioneers in Order to be approved to Bid. Those who doNot Post the Deposit Will Not be Approved. Period.
➢ Only Major Items Will be Available forOnline Bidding. Please refer to the Listing onwww.bidspotter.com for Available OnlineItems.
➢ There is a 18% Buyer’s Premium in Effect for All Online Purchases.
➢ We Highly Recommend that Potential Buyers Attend this Auction & BidLive Onsite. This will give you the Ability to Inspect the Items & FullyAppreciate Their Condition, Along with Saving You 3% of the Buyer’sPremium.
No Last Minute Registrations will be accepted. Make Sure to Register &Post Your Deposit No Later than 48-Hours Prior to the Start of the Auction.
FREE-STANDING OVERHEADCRANE SYSTEMS25 Ton X 35’ Approx. Span X 125’ Approx.Long Crane Builders Inc. Free StandingDouble Girder Top Running OverheadCrane System; 6-Way Pendant Control, 22’ Boltto Floor I-Beam Uprights (New 1997)
SEE PHOTO10 Ton X 35’ Approx. Span X 125’ Approx.Long Crane Builders Inc. Free StandingSingle Girder Top Running OverheadCrane System; 6-Way Pendant Control, 25’High Bolt to Floor I-Beam Uprights (New 1997)
SEE PHOTO
PLANER MILLSGray “Wide Pattern” Double HousingPlaner Mill; 91” X 195” Table, 98” Between SideFramer, 68” Under Milling Head, 40 HP PontiacTool Co. Swivel Type Milling Head w/ FuturmillGraduation Gage, Side Frame Milling Head, 50Taper Spindle, 35 HP Table Motor, Beel Controls,SCR Adjustable Speed Drive Panel SEE PHOTOGray Double Housing Planer Mill; 44” X 21’Long Table, (2) 20 HP Swivel Type Vertical MillingHeads, 10-500 RPM Heads, 7-1/2 HP Table Motor,50 Taper Spindles, 40” Under Milling Heads
SEE PHOTORockford “Hydraulic” Double HousingPlaner Mill; S/N 109PM63, 48” X 120” Table, 20HP Pontiac Tool Co. Swivel Type Milling Head,36” Under Milling Head, 50 Taper Spindle
SEE PHOTO
Cincinnati “Hypro” Double Housing PlanerMill; 37” X 180” Table, 20 HP Milling Head, 24”Under Milling Head, Morse Taper Quicks ChargeSpindle, 5 HP Table Motor
JIB CRANES AND MAGNETS(9) 2 Ton X 20’ Arm Column Mount JibCranes w/ Yale Electric Hoists(8) Lifting Magnets from 2 to 5 Ton
SEE PHOTO
TOOLROOM MACHINERY8’ Arm X 16” Col. Cincinnati BickfordRadial Arm Drill; S/N 5E-728, 12-1500 RPM,24” X 31” Drill Table SEE PHOTO17” X 84” American Pacemaker EngineLathe; S/N 63830-42, Taper Attachment, 23-1500 RPM, 12” 3-Jaw Chuck, 2-1/2” Spindle Hole
SEE PHOTO15” X 48” Acra Gap Bed Engine Lathe; 42To 2000 Rpm, English Metric, 5 Hp Motor
SEE PHOTO2 HP Bridgeport Vertical Mill; S/N 230601,PTF, 2-Axis DRO, 9” X 48” Table SEE PHOTO3 Hp Msc Vertical Ram Type Mill; 9” X 48”Table, 2-Axis Digital Redouts, R-8 Collects
SEE PHOTOCincinnati Model 215-16 Horizontal Mill;S/N 4J2P5K-2, 80-2500 RPM, 16” - 60” Table, 50Taper Spindle, Rotating Head SEE PHOTO16” DoAll Vertical Band Saw; Blade Welder,20-1/2” X 20-1/2” Table16” Liang Sheng Single Spindle Drill; 300To 3000 Rpm, 6” Spindle Travel, 3mt 12” Liang Sheng Single Spindle Drill; 320To 2500 Rpm, With Jacobs Chuck 10” Bewo and Everett Cold Saws16” Delta Vertical Band Saw Cincinnati Cinova 80 Model 205-2Horizontal Vertical Milling Machine; S/N31422P5V-13, 12” X 56-1/2” T-Slotted WorkTable, Vertical Head Attachment, Trax 3-AxisDigital Readouts1-1/2 HP Bridgeport Series I VariableSpeed Vertical Milling Machine; SpindleSpeeds: 80 to 4200 RPM, 9” X 42” T-Slotted WorkTable w/ Power Feed1 HP Bridgeport Eight-Speed VerticalMilling Machine; Spindle Speeds: 80 to 2720RPM, 9” X 42” T-Slotted Power Feed Work Table,Power Draw BarNo. 4 Warner & Swasey Square Head RamType Turret Lathe; Complete w/ Chucks &Four-Way Toolpost Rockford “Hydraulic” Double Housing Planer Mill
Gray “Wide Pattern” Double Housing Planer Mill
10 Ton X 35’ Approx. Span X 125’ Approx. Long Crane Builders Inc. Free Standing Single Girder Top Running Overhead Crane System
25 Ton X 35‘ Approx. Span X 125’ Approx. Long Crane Builders Inc. Free Standing Double Girder Top Running Overhead Crane System
8’ Arm X 16” Col. Cincinnati BickfordRadial Arm Drill
91” X 195” X 68”Capacity
48” X 120” X 36”Capacity
Free-Standing
Free-Standing
NEW1997
NEW1997
1338774C CIA Solon-6 2/8/13 12:30 PM Page 6
TUESDAY, MARCH 5THTUESDAY, MARCH 5TH
MISCELLANEOUS EQUIPMENT450 Amp Miller Deltaweld 450 MigWelder; S/N JF869456, Miller WireFeederMeta-Lax Model 1122-2A StressRelief and Weld Conditioning TestMachine; S/N 1369, w/ Chart Reader,Foot Pedal5 HP Quincy Model QT V53-80Single Stage Vertical Tank AirCompressor; S/N AT40081745 HP Kellog American Single StageVertical Tank Air Compressor15 HP Worthington 2-StageHorizontal Tank Air CompressorFour-Spindle Allen Gang Drill; 14”Throat, 18” Spindle Center, 100 To 1200Rpm, 4 Mt, Table 86” X 25” 50 KVA Progrestive Spot Welder;21” Throat, Ge Controls 1/2 HP Stanley D.E. Pedestal GrinderFarrell Sellars Nation Drill Grinder;S/N 80R1429Medina Model B End Grinder; S/N271 SEE PHOTO48” X 96” Rahn Granite SurfacePlate w/ Stamp
Electro-Arc Top Disintegrator 8” Tayco Swicher Grinder; 6” X 12”Chuck 20” X 34” Electro-Matic ModelP2C-206-5 Demagnetizer
TRUCK2004 Ford Model F450 XL SuperDuty Diesel Crew Cab Truck; PowerStroke V8 Turbo, 222,000 Miles, 4-Door,4-Wheel Drive
MACHINE ACCESSORIES,TOOLING AND INSPECTION EQUIPMENTMachine Accessories, Tooling andInspection Equipment Consisting
of; (8) 6” Kurt Mill Vises, (2) 8” Kurt MillVises, Tool Post Grinder, Hold DownHardware, Live Centers, Sines Plates,Compound Vises, Magnetic Chucks,Bench Vises, 48” X 96” Rahn and 24” X36” Rock of Ages Granite Surface Plates,Micrometers, Pin Gage Sets, HeightGages, Parallels, Approx. (25) VariousSize Angle Plates, H.S. Morse Taper Drills,Face Mills, Reamers, Taps and ManyOther Related Items
OFFICE EQUIPMENT ANDFURNITUREOffice Equipment Consisting of; (2)Dell Desk Top PC Systems, H.P. Office Jet6500A Wireless Fax-Copier-Scanner,Sharp AL-1631 Laser Copier, Desks,Chairs, Tables, Book Cases and OtherRelated Items
(8) Lifting Magnets from 2 to 5Ton
Medina Model B EndGrinder
Cincinnati Model 215-16Horizontal Mill
3 Hp Msc Vertical Ram TypeMill
2 HP Bridgeport Vertical Mill
Partial View Steel MaterialHeald 261 Warner & Swasey Turret Lathe
17” X 84” American Pacemaker Engine Lathe
Meta-Lax and Miller Welding Systems
15” X 48” Acra Gap Bed Engine Lathe(2 OF 3) Lift Trucks to 8,000 LB Capacity Gray Double Housing Planer Mill
44” X 21” X 40”Capacity
1338774C CIA Solon-6 2/8/13 12:30 PM Page 1
All equipment described herein will be sold “asis”, “where is” to the highest bidder or biddersfor cash in accordance with our regular termsand conditions of sale. Unless other satisfactoryarrangements are made, a 25% deposit in cash,certified or cashier’s check payable to CincinnatiIndustrial Auctioneers, Inc., is required on allpurchases. Firm and personal checks acceptedonly if accompanied by a letter from your bankguaranteeing your funds. All sales are subjectto state and/or local taxes unless a signedexemption form is presented at the time of pur-chase. All balances are due at the conclusionof the sale. No merchandise may be removedwhile the sale is in progress. All bidders mustcomply with our Standard Terms of Sale,copies of which will be available at the sale siteor can be obtained from our website.
From I-80 (Ohio Turnpike) Approx. 35 Miles Southeast ofCleveland, exit at S.R. 14 (No. 187), Proceed Southeast on Rt.14 approx. 1 ? Miles to Rt. 43, Turn Left (North) onto Rt. 43and go approx. 2-1/2 Miles to Crane Center St., turn right onCrane Center. Go 1 Block and make a right on Wason St., go1 Block to Sale Site on right, watch for auction signs.
DIRECTIONS
TUESDAY, MARCH 5THTUESDAY, MARCH 5TH
SALE DATE:Tuesday, March 5thSTARTING AT 10:00AM
INSPECTION:Monday, March 4th
10:00 AM to 4:00 PM
FIRST CLASS MAIL! PRE-SORTFIRST CLASS
U.S. POSTAGEPAID
CINCINNATI, OHIOPERMIT NO. 3593
Important MailTO BE DIRECTED TO THE ATTENTION OF EXECUTIVE PERSONNEL☞
LARGE CAPACITY GRINDING AND MACHINING FACILITY INCLUDING HYDRAULICSURFACE GRINDERS TO 56” X 196”, ROTARY SURFACE GRINDERS TO 60”, CNC
VMC’S, PLANER MILLS, BRIDGE CRANES TO 25 TON AND SUPPPORT EQUIPMENT
Although information has been obtained from sourcesdeemed reliable, the auctioneer makes no warranty orguarantee, expressed or implied, as to the accuracy ofthe information herein contained. It is for this reasonthat buyers should avail themselves of the opportuni-ty to make inspection prior to the sale. This brochureis intended to provide general information of the equip-ment being offered and is subject to errors, omissions,additions or deletions. Please check with the Auctioneer’sOffice for a final listing. Items offered may or may notnecessarily be sold as described and/or photographed inthis brochure.
MAIL BIDS ACCEPTED WITH A 25% DEPOSIT
IMPORTANT NOTICE:
1400 Miller Parkway – Streetsboro, Ohio 4424120 Miles Southeast of Cleveland, Ohio
(2) Free-Standing Crane Systemsto 25 Ton
(2) Free-Standing Crane Systemsto 25 Ton
(2) Free-Standing Crane Systemsto 25 Ton
Surface Grinders to 56” X 196”Surface Grinders to 56” X 196”Surface Grinders to 56” X 196”
60” Blanchard 100 HP Grinder60” Blanchard 100 HP Grinder60” Blanchard 100 HP Grinder
CNC VMC’s to 41” X 122”CNC VMC’s to 41” X 122”CNC VMC’s to 41” X 122”
1400 Miller Parkway Streetsboro, Ohio 44241
20 Miles Southeast of Cleveland, Ohio
Assets From Bankruptcy
Cincinnati Industrial Auctioneers, Inc. – License No. 63-1983-10439Jeffrey L. Luggen – License No. 57-1983-33789Jerome A. Luggen – License No. 52-1983-33799Jeffrey M. Luggen – License No. 2010-0000-26Joseph M. Luggen – License No. 2010-0000-19
