Solution Mining - Senninger Irrigation...n Xcel-Wobbler 05 SPRAYS n Super Spray 07 IMPACT SPRINKLERS...

senninger.com

Low Pressure - High Performance

Solution Mining

senninger.com

Leach recovery of gold, silver and copper, dust suppression, solution evaporation, rinsing, and effluent.

A Hunter Industries Company

01 | A Hunter Industries Company

WHAT'SINSIDE

WOBBLERS

n mini-Wobbler 02

n Wobbler 03

n Xcel-Wobbler 05

SPRAYS

n Super Spray 07

IMPACT SPRINKLERS

n 30, 40, 50 Series 09

n Part-Circle 11

n 80 Series 13

PRESSURE REGULATORS

n PRMP 15

n PRL - Low Flow 16

n PMR-MF - Medium Flow 16

n PR-HF - High Flow 17

n PRU 17

COMPONENTS

n Riser Adapter Assemblies 18

SOFTWARE

n Irri-Maker/IrriExpress 19

n WinSIPP Mining 20

RESOURCES

n Nozzles 21

n Product Warranty 22

PARTNERINGTOGETHER“Guaranteed Performance”

Senninger Irrigation Inc. has promoted the concept of “Low Pressure – High Performance” efficient irrigation through the development of products that conserve energy and provide exceptional uniformity. Senninger products became popular for agricultural applications, and in 1970, became popular among the mining industry with the development of Custom Mining Sprinklers (CMS). All Senninger mining products are constructed using engineering-grade thermoplastic resins which are specially formulated and selected for resistance to corrosion, abrasion, ultraviolet degradation, and the rugged conditions specific to solution mining. Senninger sprinklers, spray nozzles, wobblers, and pressure regulators are used globally for mineral recovery, dust control, effluent disbursement, evaporation, side of slope leaching, and other industrial applications.

02AGRICULTURAL IRRIGATION | LOW PRESSURE - HIGH PERFORMANCEVisit senninger.com

mini-Wobbler®

CMS mini-Wobblers use off-center rotary-action wobbler technology. It provides extremely uniform coverage over a large diameter at low operating pressures and produces a gentle application of solutions.

MINI-WOBBLER CMS

FEATURES• Only one moving part for longer life

• Low evaporative loss at low pressures

• Inlet size: 1/ 2” NPT male

• Flow rates: 0.42 to 2.18 gpm (95 to 495 L/hr)

• One-year warranty on materials and workmanship

MINI-WOBBLER CMSSPRINKLER BASE PRESSURE-US

psiMINI-WOBBLER CMS SPRINKLER BASE PRESSURE-METRIC

bar

15 20 25 1.03 1.38 1.72#4 Nozzle - Blue (1/16") #4 Nozzle - Blue (1.59 mm)

Flow (gpm) 0.42 0.50 0.56 Flow (L/hr) 95 114 127

Diameter at 1.5 ft ht (ft) 26.5 28.0 28.0 Diameter at 0.46 m ht (m) 8.1 8.5 8.5

#5 Nozzle - Brown (5/64") #5 Nozzle - Brown (1.98 mm)

Flow (gpm) 0.64 0.75 0.84 Flow (L/hr) 145 170 191


#6 Nozzle - Orange (3/32") #6 Nozzle - Orange (2.38 mm)

Flow (gpm) 0.95 1.10 1.25 Flow (L/hr) 216 250 284


#7 Nozzle - Dark Green (7/64") #7 Nozzle - Dark Green (2.78 mm)

Flow (gpm) 1.30 1.51 1.69 Flow (L/hr) 295 343 384


#8 Nozzle - Purple (1/8") #8 Nozzle - Purple (3.18 mm)

Flow (gpm) 1.67 1.95 2.18 Flow (L/hr) 379 443 495


Sprinkler performance may vary with actual field conditions. Other nozzle sizes are available. Consult factory for specific performance data. Stream heights range from 1.5 to 3.0 ft (0.46 to 0.91 m) above nozzle based on pressure and nozzle size. Minimum recommended riser height is 1.5 ft (0.46 m).

MINI-WOBBLER WOBBLER XCEL-WOBBLER

| A Hunter Industries Company03

Wobbler®

Standard and Low-Angle

WO

BB

LERS


CMS Wobblers have a unique off-center rotary-action. This design provides extremely uniform coverage over a large diameter at low operating pressures.


• Low evaporative loss at low pressures

• Inlet Sizes: 3/4" or 1/ 2" NPT male



STANDARDANGLE

SPECIFIC FEATURES - LOW-ANGLE

• Lower trajectory

• Reduced droplet size for a more gentle application

LOWANGLE

The Wobbler can be mounted directly into a saddle or pre-engineered plastic female fitting. To minimizing evaporative losses, operate the Wobbler at 10 to 20 psi (0.69 to 1.38 bar).

The Wobbler can be mounted directly into a pressure regulator. A nipple connects it to the lateral. Use carbon or stainless steel nipples in gold and silver mining. Use stainless steel nipples in acid copper leaching.

MOUNTING OPTIONS

40

Pre-Engineered Saddle or Fitting

Lateral Line

Wobbler

Regulator

Never Use Plastic Nipple Here

Pre Engineered Saddle or Fitting

Lateral Line

Wobbler

AGRICULTURAL IRRIGATION | LOW PRESSURE - HIGH PERFORMANCEVisit senninger.com 04

WO

BB

LER

S


Standard and Low-Angle Wobbler®

WOBBLER CMSSPRINKLER BASE PRESSURE-US

psiWOBBLER CMS SPRINKLER BASE PRESSURE-METRIC

bar

10 15 20 25 30 0.69 1.03 1.38 1.72 2.07

#6 Nozzle - Gold (3/32") #6 Nozzle - Gold (2.38 mm)

Flow (gpm) 0.78 0.95 1.10 1.23 1.35 Flow (L/hr) 177 216 250 279 307

SA Diameter at 1.5 ft ht (ft) 34.0 39.0 41.5 43.5 44.0 SA Diameter at 0.46 m ht (m) 10.4 11.9 12.7 13.3 13.4

LA Diameter at 1.5 ft ht (ft) 29.0 34.5 38.0 40.5 41.0 LA Diameter at 0.46 m ht (m) 8.8 10.5 11.6 12.4 12.5

#7 Nozzle - Lime (7/64") #7 Nozzle - Lime (2.78 mm)

Flow (gpm) 1.06 1.30 1.50 1.68 1.84 Flow (L/hr) 241 295 341 382 418



#8 Nozzle - Lavender (1/8") #8 Nozzle - Lavender (3.18 mm)

Flow (gpm) 1.40 1.71 1.98 2.21 2.42 Flow (L/hr) 318 388 450 502 550



#9 Nozzle - Grey (9/64") #9 Nozzle - Grey (3.57 mm)

Flow (gpm) 1.80 2.20 2.54 2.84 3.11 Flow (L/hr) 409 500 577 645 706



#10 Nozzle - Turquoise (5/32") #10 Nozzle - Turquoise (3.97 mm)

Flow (gpm) 2.22 2.72 3.14 3.51 3.85 Flow (L/hr) 504 618 713 797 874



#11 Nozzle - Yellow (11/64") #11 Nozzle - Yellow (4.37 mm)

Flow (gpm) 2.69 3.30 3.81 4.26 4.67 Flow (L/hr) 611 749 865 968 1061



#12 Nozzle - Red (3/16") #12 Nozzle - Red (4.76 mm)

Flow (gpm) 3.23 3.96 4.57 5.11 5.60 Flow (L/hr) 734 899 1038 1161 1272



#13 Nozzle - White (13/64") #13 Nozzle - White (5.16 mm)

Flow (gpm) 3.80 4.65 5.38 6.01 6.59 Flow (L/hr) 863 1056 1222 1365 1497



#14 Nozzle - Blue (7/32") #14 Nozzle - Blue (5.56 mm)

Flow (gpm) 4.40 5.39 6.23 6.97 7.64 Flow (L/hr) 999 1224 1415 1583 1735



SA = standard-angle, LA = mid-angle. Sprinkler performance may vary with actual field conditions. Other nozzle sizes are available. Consult factory for specific performance data. Stream heights range from 2.5 to 5.5 ft (0.8 to 1.7 m) above nozzle based on pressure and nozzle size.


Xcel-Wobbler®

High & Mid Angle

CMS Xcel-Wobblers utilize a unique, off-center rotary-action to provide extremely uniform coverage at low operating pressures with very low evaporative losses.


• Low wind-drift and evaporative loss at low pressures

• Counter-balance design reduces vibration for a smooth, stable performance

• Inlet sizes: 3/4" or 1/ 2" NPT male


• One year warranty on materials and workmanship

HIGH-ANGLE MID-ANGLE

XCEL-WOBBLER INTO A PRESSURE REGULATOR


Lateral Line

Xcel-Wobbler

Regulator

XCEL-WOBBLER ON RISER


Lateral Line

Xcel-Wobbler

HDPE Riser 15 cm high min.30 cm high max.

XCEL-WOBBLER ON RISER WITH RISER ADAPTER

Tubing: 0.345" IDor 0.27" ID

Super BarbX Hose Barb Adapter

Xcel-Wobbler

Riser Adapter

SPECIFIC FEATURES - MID-ANGLE

• Lower trajectory

• Reduced droplet size for a more gentle application


WO

BB

LERS


XCEL-WOBBLER CMSSPRINKLER BASE PRESSURE-US

psiXCEL-WOBBLER CMS SPRINKLER BASE PRESSURE-METRIC

bar

10 15 20 25 0.69 1.03 1.38 1.72#6 Nozzle - Gold (3/32") #6 Nozzle - Gold (2.38 mm)

Flow (gpm) 0.78 0.95 1.10 1.23 Flow (L/hr) 177 216 250 279

HA Diameter at 1.5 ft ht (ft) 36.5 41.0 45.0 46.0 HA Diameter at 0.46 m ht (m) 11.1 12.5 13.7 14.0

MA Diameter at 1.5 ft ht (ft) 32.0 35.0 38.5 41.0 MA Diameter at 0.46 m ht (m) 9.8 10.7 11.7 12.5


Flow (gpm) 1.06 1.30 1.50 1.68 Flow (L/hr) 241 295 341 382



#8 Nozzle - Lavender (1/8") #8 Nozzle - Lavender (3.18 mm)

Flow (gpm) 1.40 1.71 1.98 2.21 Flow (L/hr) 318 388 450 502




Flow (gpm) 1.80 2.20 2.54 2.84 Flow (L/hr) 409 500 577 645




Flow (gpm) 2.22 2.72 3.14 3.51 Flow (L/hr) 504 618 713 797




Flow (gpm) 2.69 3.30 3.81 4.26 Flow (L/hr) 611 749 865 968




Flow (gpm) 3.23 3.96 4.57 5.11 Flow (L/hr) 734 899 1038 1161




Flow (gpm) 3.80 4.65 5.38 6.01 Flow (L/hr) 863 1056 1222 1365




Flow (gpm) 4.40 5.39 6.23 6.97 Flow (L/hr) 999 1224 1415 1583



HA = high-angle, MA = mid-angle. Sprinkler performance may vary with actual field conditions. Other nozzle sizes are available. Consult factory for specific performance data. Stream heights range from 2.5 to 5.5 ft (0.8 to 1.7 m) above nozzle based on pressure and nozzle size.


High & Mid Angle Xcel-Wobbler®

WO

BB

LER

S


SUPER SPRAY

Super Spray®

SPR

AY

S

The CMS Super Spray provides a full 360° spray pattern and is designed to handle flows up to 8.79 gpm (1996 L/hr). It is extremely useful for evaporation of excess water in gold and silver mining installations.

FEATURES• No moving parts for longer life

• Built for strength and durability using high-impact engineering-grade thermoplastics

• Interchangeable deflector pads to customize spray angle and droplet size

• Inlet Sizes: 3/4" NPT male

• Flow range: 2.75 to 8.79 gpm (625 to 1996 L/hr)Consult factory for lower or higher flow rates.


EASY CLEAN NOZZLE DESIGN

Just pinch and pull to remove the nozzle then place and click to re-install. No need to disassemble or remove the sprinkler. Nozzle sizes are easily identifiable with color-coding and embossing on the ears, including half sizes (orifice diameters in 1/ 128 inch increments).

DEFLECTOR PADS• Evaporation (black)• Convex Smooth (green)• Flat Smooth (black)

Consult factory for other deflector pad options.

Stream height above spray pad

14 �

12

10

8

6

4

2

0

(4.27 m)

(3.66)

(3.05)

(2.44)

(1.83)

(1.22)

(0.61)

(0.00)

Evaporation pad5.75 to 13.5 �(1.75 m to 4.11 m)

Convex smooth pad1.0 to 2.5 �(0.30 m to 0.76 m)

Flat smooth pad0.0 to 0.5 �(0.0 m to 0.15 m)

Evaporation results will vary depending on wind, temperature, humidity and other factors. These variables must be considered when calculating evaporative performance.

Evaporation pad5.75 to 13.5 ft(1.75 m to 4.11 m)

Convex smooth pad1.0 to 2.5 ft(0.30 m to 0.76 m)

Flat smooth pad0.0 to 0.5 ft(0.0 m to 0.15 m)

(4.27 m) 14 ft

(3.66 m) 12 ft

(3.05 m) 10 ft

(2.44 m) 8 ft

(1.83 m) 6 ft

(1.22 m) 4 ft

(0.61 m) 2 ft

(0.00 m) 0 ft

STREAM HEIGHT ABOVE SPRAY PAD


Super Spray®

SUPER SPRAY

SUPER SPRAYSPRINKLER BASE PRESSURE-US

psiSUPER SPRAY SPRINKLER BASE PRESSURE-METRIC

bar

15 20 25 30 1.04 1.38 1.73 2.07


Flow (gpm) 2.75 3.17 3.55 3.88 Flow (L/hr) 625 720 806 881

Evaporation Pad - Diameter at 1.5 ft ht (ft) 22.0 24.0 25.0 25.0 Evaporation Pad- Diameter at 0.46 m ht (m) 6.7 7.3 7.6 7.6

Convex-Smooth Pad - Diameter at 1.5 ft ht (ft) 24.5 28.5 31.5 31.5 Convex-Smooth Pad - Diameter at 0.46 m ht (m) 7.5 8.7 9.6 9.6

Flat-Smooth Pad - Diameter at 1.5 ft ht (ft) 22.0 24.0 26.0 27.0 Flat-Smooth Pad - Diameter at 0.46 m ht (m) 6.7 7.3 7.9 8.2


Flow (gpm) 3.33 3.84 4.30 4.71 Flow (L/hr) 756 872 977 1070





Flow (gpm) 3.97 4.58 5.12 5.61 Flow (L/hr) 902 1040 1163 1274





Flow (gpm) 4.66 5.38 6.02 6.59 Flow (L/hr) 1058 1222 1367 1497





Flow (gpm) 5.41 6.25 6.99 7.65 Flow (L/hr) 1229 1420 1588 1738




#15 Nozzle - Dark Brown (15/64") #15 Nozzle - Dark Brown (5.95 mm)

Flow (gpm) 6.22 7.18 8.03 8.79 Flow (L/hr) 1413 1631 1824 1996




Sprinkler performance may vary with actual field conditions. Other nozzle sizes are available. Consult factory for specific performance data.

SPR

AY

S


IMPA

CTS

30 40 50 Series

CMS full-circle 3/4" impact sprinklers are available in three models based on their flow. These sprinklers deliver low application rates because of their large diameter of coverage.

FEATURES• Splash arm spring and bearing enclosed for better

resistance to corrosion and environmental extremes

• Constructed of engineering-grade thermoplastics and specially selected stainless steel componentsfor excellent corrosion resistance

• Wide range of nozzle/vane combinations for excellent distribution at all pressures

• Inlet size: 3/4" M NPT (3/4" F NPT and 1" F NPT also available)

• Flow range:3023 Model - 1.84 to 5.17 gpm (418 to 1174 L/hr)4023 Model - 3.82 to 10.1 gpm (868 to 2294 L/hr)5023 Model - 6.50 to 16.1 gpm (1476 to 3657 L/hr)


3023-CMS SPRINKLER BASE PRESSURE-US

psi 3023-CMS SPRINKLER BASE PRESSURE-METRIC

bar

30 35 40 45 50 55 2.07 2.41 2.76 3.10 3.45 3.79


Flow (gpm) 1.84 1.99 2.12 2.25 2.37 2.51 Flow (L/hr) 418 452 482 511 538 570

Diameter at 1.5 ft ht (ft) 77 79 81 82 83 84 Diameter at 0.46 m ht (m) 23.5 24.1 24.7 25.0 25.3 25.6

#8 Nozzle - Lav. (1/8") #8 Nozzle - Lav. (3.18 mm)

Flow (gpm) 2.42 2.62 2.79 2.97 3.12 3.28 Flow (L/hr) 550 595 634 675 709 745



Flow (gpm) 3.08 3.33 3.56 3.78 3.98 4.16 Flow (L/hr) 700 756 809 859 904 945


#10 Nozzle - Turq. (5/32") #10 Nozzle - Turq. (3.97 mm)

Flow (gpm) 3.82 4.13 4.41 4.68 4.93 5.17 Flow (L/hr) 868 938 1002 1063 1120 1174


Stream heights range from 6.0 to 7.5 ft (1.8 to 2.3 m) above nozzle based on pressure and nozzle size.

Impact sprinklers can be mounted directly into a pressure regulator, which in turn, is mounted directly into a saddle or pre-engineered plastic female fitting. They can also be mounted directly into a saddle or pre-engineered plastic female fitting. Use carbon or stainless steel nipples in gold and silver mining installations. Use stainless steel nipples in acid copper leaching.

MOUNTING OPTIONS

40


Lateral Line

Impact

Regulator

Never Use Plastic Nipple Here

30, 40, 50 SERIES PART-CIRCLE 80 SERIES


IMPA

CTS




bar

30 35 40 45 50 55 2.07 2.41 2.76 3.10 3.45 3.79


Flow (gpm) 3.82 4.13 4.41 4.68 4.93 5.17 Flow (L/hr) 868 938 1002 1063 1120 1174



Flow (gpm) 4.63 5.00 5.34 5.67 5.98 6.27 Flow (L/hr) 1052 1136 1213 1288 1358 1424



Flow (gpm) 5.52 5.97 6.37 6.76 7.13 7.48 Flow (L/hr) 1254 1356 1447 1535 1619 1699



Flow (gpm) 6.50 7.02 7.49 7.95 8.38 8.80 Flow (L/hr) 1476 1594 1701 1806 1903 1999



Flow (gpm) 7.49 8.09 8.63 9.17 9.66 10.1 Flow (gpm) 1701 1837 1960 2083 2194 2294

Diameter at 1.5 ft ht (ft) 96 99 101 103 105 106 Diameter at 1.5 ft ht (ft) 27.1 28.0 28.7 29.3 29.9 30.5

Stream heights range from 6.5 to 10.0 ft (2.0 to 3.1 m) above nozzle based on pressure and nozzle size.



bar

30 35 40 45 50 55 2.07 2.41 2.76 3.10 3.45 3.79


Flow (gpm) 6.50 7.02 7.49 7.95 8.38 8.80 Flow (gpm) 1476 1594 1701 1806 1903 1999



Flow (gpm) 7.49 8.09 8.63 9.17 9.66 10.1 Flow (gpm) 1701 1837 1960 2083 2194 2294



Flow (gpm) 8.51 9.19 9.81 10.4 11.0 11.5 Flow (gpm) 1933 2087 2228 2362 2498 2612



Flow (gpm) 9.63 10.4 11.1 11.8 12.4 13.0 Flow (gpm) 2187 2362 2521 2680 2816 2953



Flow (gpm) 10.7 11.6 12.3 13.1 13.8 14.5 Flow (gpm) 2430 2635 2794 2975 3134 3293



Flow (gpm) 11.9 12.9 13.7 14.6 15.4 16.1 Flow (gpm) 2703 2903 3112 3316 3498 3657


Stream heights range from 7.0 to 11.5 ft (2.1 to 3.5 m) above nozzle based on pressure and nozzle size. Sprinkler performance may vary with actual field conditions. Diameters shown are for barrel vanes. Other vanes are available. Consult factory for specific performance data.

30 40 50 Series


Part-Circle

Part-Circle EFF impact sprinklers are ideal for dust control. They are designed specifically for use where a directional impact sprinkler is required. Senninger’s Part-Circle sprinklers are available in three models, each for different flows.

FEATURES• Distributes water in a 60º to 360° pattern in 5°

increments

• Enclosed stainless steel springs and fulcrum pin to resist contamination

• Constructed of engineering-grade thermoplastics and specific selected stainless steel components for excellent corrosion resistance

• Inlet size: 3/4" NPT male (3/4" NPT female and 1" NPT female also available)

• Flow ranges:3123 Model – 2.42 to 5.17 gpm (550 to 1174 L/hr)4123 Model – 3.82 to 8.80 gpm (868 to 1999 L/hr)5123 Model – 6.50 to 16.1 gpm (1476 to 3657 L/hr)


DUST CONTROL

When coupled to a portable pipe system, the Part-Circle provides the best and most flexible option to keep dust under control.

BENEFITS FOR SIDE SLOPE LEACHING

• Provides gold or silver leach solution application in hard to reach areas

• Eliminates costly mobile watering

• Conserves water

• Increases coverage efficiency

• Allows dust control automation

• Reduces traffic dust on mining roads

IDEAL FOR SIDE SLOPE


IMPA

CTS

SIDE SLOPE LAYOUT EXAMPLE

Sprinkler indicated by

Model 3123 Part-Circle: nozzle #9 (9/64")

NotePressure regulator recommended at 40 psi (2.76 bar)

Radius 42 ft (12.8 m)

Flow 3.56 gpm (809 L/hr)

Portable pipe

50 ft (15.24 m)spacing

Sprinklers

42 ft (12.8 m)radius of throw

40 ft

.(1

2.19

m)


Part-Circle

IMPA

CTS

3123-PC-EFFSPRINKLER BASE PRESSURE-US

3123-PC-EFF SPRINKLER BASE PRESSURE-METRIC

psi bar30 35 40 45 50 55 2.07 2.42 2.76 3.11 3.45 3.80

#8 Nozzle - Lav. (1/8") #8 Nozzle - Lav. (3.18 mm)

Flow (gpm) 2.42 2.62 2.79 2.97 3.12 3.28 Flow (L/hr) 550 595 634 675 709 745

Radius at 1.5 ft ht (ft) 38 39 40 41 42 42 Radius at 0.46 m ht (m) 11.6 11.9 12.2 12.5 12.8 12.8


Flow (gpm) 3.08 3.33 3.56 3.78 3.98 4.16 Flow (L/hr) 700 756 809 859 904 949


#10 Nozzle - Turq. (5/32") #10 Nozzle - Turq. (3.97 mm)

Flow (gpm) 3.82 4.13 4.41 4.68 4.93 5.17 Flow (L/hr) 868 938 1002 1063 1120 1174


4123-PC-EFF SPRINKLER BASE PRESSURE-US


psi bar

30 35 40 45 50 55 2.07 2.42 2.76 3.11 3.45 3.80


Flow (gpm) 3.82 4.13 4.41 4.68 4.93 5.17 Flow (L/hr) 868 938 1002 1063 1120 1174



Flow (gpm) 4.63 5.00 5.34 5.67 5.98 6.27 Flow (L/hr) 1052 1136 1213 1288 1358 1424



Flow (gpm) 5.52 5.97 6.37 6.76 7.13 7.48 Flow (L/hr) 1254 1356 1447 1535 1619 1699



Flow (gpm) 6.50 7.02 7.49 7.95 8.38 8.80 Flow (L/hr) 1476 1594 1701 1806 1903 1999


5123-PC-EFF SPRINKLER BASE PRESSURE-US


psi bar

30 35 40 45 50 55 2.07 2.42 2.76 3.11 3.45 3.80


Flow (gpm) 6.50 7.02 7.49 7.95 8.38 8.80 Flow (gpm) 1476 1594 1701 1806 1903 1999



Flow (gpm) 7.49 8.09 8.63 9.17 9.66 10.1 Flow (gpm) 1701 1837 1960 2083 2194 2294



Flow (gpm) 8.51 9.19 9.81 10.4 11.0 11.5 Flow (gpm) 1933 2087 2228 2362 2498 2612



Flow (gpm) 9.63 10.4 11.1 11.8 12.4 13.0 Flow (gpm) 2187 2362 2521 2680 2816 2953



Flow (gpm) 10.7 11.6 12.3 13.1 13.8 14.5 Flow (gpm) 2430 2635 2794 2975 3134 3293



Flow (gpm) 11.9 12.9 13.7 14.6 15.4 16.1 Flow (gpm) 2703 2903 3112 3316 3498 3657


Sprinkler performance may vary with actual field conditions. Radius shown is for standard straight bore nozzles and stream straightening vanes. Other nozzles and/or vane combinations are available. Consult factory for specific performance data. Stream heights range from 6.0 to 10.0 ft (1.8 to 3.1 m) above nozzle based on pressure nozzle size. Minimum recommended riser height is 1.5 ft (0.46 m).


| A Hunter Industries Company

80 Series

13


FEATURES

• Splash arm spring and bearing enclosed for better resistance to corrosion and environmental extremes

• Constructed of engineering-grade thermoplastics and specially selected stainless steel components for excellent corrosion resistance

• Heavy-duty design to withstand rugged mining conditions

• Single-nozzle design provides greater resistance to clogging

• Double-nozzle design also available for greater uniformity

• Inlet sizes: 1 ¼" NPT male, 1 ½" NPT male, 1 ¼" BSPT male (1 ¼" NPT female also available)

• 1" model (7025) also available for gold and silver.Consult factory for specific flow and application rates

• Flow range: 25.2 to 88.7 gpm (5724 to 20146 L/hr). Consult factory for lower or higher flow rates


Senninger’s 80 Series CMS impact sprinklers distribute water over a large diameter. They are designed for maximum efficiency at high flow rates.

Impact sprinklers that are mounted onto a riser should be stabilized to counteract the sprinkler’s thrust. When using risers in gold and silver mining, use carbon steel or stainless steel pipe. When using risers in acid copper leaching, use stainless steel pipe.

MOUNTING OPTIONS


Lateral Line

Impact

Adapter

Stabilizing Tripod

Riser

IMPA

CTS


80 Series


8025-CMS SPRINKLER BASE PRESSURE-METRIC40 50 60 70 2.76 3.45 4.14 4.83

#24 Nozzle - (3/8") #24 Nozzle - (9.53 mm)

Flow (gpm) 25.2 28.2 30.9 33.3 Flow (L/hr) 5724 6405 7018 7563

Diameter at 1.5 ft ht (ft) 134 144 154 159 Diameter at 0.46 m ht (m) 41 44 47 48

#26 Nozzle - (13/32") #26 Nozzle - (10.32 mm)

Flow (gpm) 29.3 32.7 35.9 38.7 Flow (L/hr) 6655 7427 8154 8790


#28 Nozzle - (7/16") #28 Nozzle - (11.11 mm)

Flow (gpm) 33.9 38.0 41.6 44.9 Flow (L/hr) 7700 8631 9448 10198


#30 Nozzle - (15/32") #30 Nozzle - (11.91 mm)

Flow (gpm) 38.6 43.1 47.2 51.0 Flow (L/hr) 8767 9789 10720 11583


#32 Nozzle - (1/2") #32 Nozzle - (12.7 mm)

Flow (gpm) 43.9 49.0 53.7 58.0 Flow (L/hr) 9971 11129 12197 13173


#34 Nozzle - (17/32") #34 Nozzle - (13.49 mm)

Flow (gpm) 49.5 55.4 60.7 65.5 Flow (L/hr) 11243 12583 13786 14877


#36 Nozzle - (9/16") #36 Nozzle - (14.29 mm)

Flow (gpm) 55.5 62.1 68.0 73.5 Flow (L/hr) 12605 14104 15444 16694


#38 Nozzle - (19/32") #38 Nozzle - (15.08 mm)

Flow (gpm) 59.9 66.9 73.3 79.2 Flow (L/hr) 13605 15195 16648 17988


#40 Nozzle - (5/8") #40 Nozzle - (15.88 mm)

Flow (gpm) 67.1 75.0 82.1 88.7 Flow (L/hr) 15240 17034 18647 20146


Sprinkler performance may vary with actual field conditions. Diameters shown are for standard straight bore nozzles and stream-straightening vanes (black). Other nozzles are available. Consult factory for specific performance data. Stream heights range from 12.5 to 28.0 ft (3.8 to 8.5 m) above nozzle based on pressure and nozzle size.


IMPA

CTS


PR

ESSUR

E REG

ULA

TOR

S

PMRPPRMP PRL PMR-MF PRHF PRU

FEATURES• Maintains a constant preset outlet pressure

while handling varying inlet pressures

• Inlet sizes: 3/4" female hose, 3/4" NPT female. Outlet sizes: 3/4" male hose, 3/4" NPT male

• Tamper-proof housing

• Very low hysteresis and friction losses

• 100% water-tested for accuracy at Senninger’s in-house facilities

• No external metal parts for excellent corrosion resistance

The PRMP (Pressure Regulator Mining Prospector) is ideal for copper or gold and silver mining installations requiring lower flows of 0.5 to 7.0 gpm (114 to 1590 L/hr) including side slope leaching and drip. Specifically designed for durability and optimum performance even in very low acid-cure processes.

Supply line(side view)

Drip Tube Adapter

Prospector pressure regulator

Drip Tube Adapter

Drip or sprinkler line

PRMP DESIGN CRITERIA

Preset Operating Pressure

Maximum Inlet

Pressure

Flow Range

gpm L/hr

PRMP 10 10 psi (0.69 bar) 90 psi (6.20 bar) 0.5- 7 114 - 1590

PRMP 15 15 psi (1.03 bar) 95 psi (6.55 bar) 0.5 - 7 114 - 1590






Spec sheets available online at www.senninger.com

CAUTION: Always install downstream from all shut off valves.

PRMP NPT X NPT

PRMP HOSE X HOSE


PR

ESSU

RE

REG

ULA

TOR

S

PRLPRMP PRL PMR-MF PRHF PRU

FEATURES• Regulator maintains a constant preset outlet

pressure based on its flow/inlet pressure.

• Outlet pressures: 6 to 40 psi (0.41 to 2.76 bar)

• Inlet sizes: 3/4" F NPT, 3/4" F hoseOutlet sizes: 3/4" F NPT

• Tamper-proof housing


• 100% water-tested for accuracy

The CMS PRL (Pressure Regulator Low Flow) is designed for mining installations requiring lower flows of 0.5 to 8.0 gpm (114 to 1817 L/hr). PRL

CMS Low Flow

PRL-CMSDESIGN CRITERIA


Maximum Inlet

Pressure

Flow Range

gpm L/hr

PRL 6 CMS 6 psi (0.41 bar) 80 psi (5.51 bar) 0.5 - 5 114 - 1136





PRL 25 CMS 25 psi (1.72bar) 105 psi (7.24 bar) 0.5 - 8 114 - 1817






PMR-MFThe CMS PMR-MF (Pressure Master Regulator Medium Flow) is designed for mining installations requiring mid-range flows of 2 to 20 gpm (454 to 4543 L/hr). PMR-MF

CMS Medium Flow

PMR-MF-CMSDESIGN CRITERIA


Maximum Inlet

Pressure

Flow Range

gpm L/hr

PMR 6 MF CMS 6 psi (0.41 bar) 80 psi (5.51 bar) 4 - 16 909 - 3634



PMR 15 MF CMS 15 psi 1.03 bar) 95 psi (6.55 bar) 2 - 20 454 - 4543


PMR 25 MF CMS 25 psi (1.72bar) 105 psi (7.24 bar) 2 - 20 454 - 4543





PMR 60 MF CMS 60 psi ( 4.14 bar) 140 psi (9.65 bar) 2 - 20 454 - 4543



FEATURES• Each regulator maintains a constant preset

outlet pressure based on its flow/inlet pressure.

• Outlet pressures: 6 to 60 psi (0.41 to 4.14 bar)

• Inlet sizes: 3/4" NPT female, 1" NPT female, 1" NPT male, 1" BSPT female. Outlet sizes: 3/4" NPT female, 1" NPT female, 1" BSPT female


• 100% water-tested for accuracy


PR-HFPRMP PRL PMR-MF PR-HF PRU

PRUThe PRU was designed to handle higher flows of 20 to 100 gpm (4543 - 22713 L/hr). Its 2-inch inlet and outlet size make it an ideal option for accurate zone and individual sprinkler pressure control. Its compact size fits in a valve box.

PRU DESIGN CRITERIA


Maximum Inlet

Pressure

Flow Range

gpm L/hr

PRU 10 10 psi (0.69 bar) 90 psi (6.20 bar) 20 - 100 4543 - 22713








The pressure regulator shall maintain the predetermined operating pressure

provided that the inlet pressure is at least 5 psi (0.34 bar) above the expected

outlet pressure, but not exceeding the maximum inlet pressure as shown above.

PR-HF DESIGN CRITERIA


Maximum Inlet

Pressure

Flow Range

gpm L/hr

PR 10 HF 10 psi (0.69 bar) 90 psi (6.20 bar) 10 - 32 2271 - 7268

PR 15 HF 15 psi 1.03 bar) 95 psi (6.55 bar) 10 - 32 2271 - 7268


PR 25 HF 25 psi (1.72bar) 105 psi (7.24 bar) 10 - 32 2271 - 7268




The pressure regulator shall maintain the predetermined operating pressure provided that the inlet pressure is at least 5 psi (0.34 bar) above the expected outlet pressure, but not exceeding the maximum inlet pressure as shown above.

The PR-HF (Pressure Regulator High Flow) is ideal for installations requiring higher flows of 10 to 32 gpm (2271 to 7268 L/hr), including solid-set sprinkler and low volume manifolds.

CAUTION: Always install downstream from all shut off valves. Recommended for outdoor use only. Not NSF certified.

CAUTION: Always install downstream from all shut off valves. Recommended for outdoor use only. Not NSF certified.

FEATURES• Regulator maintains a constant preset outlet


• Inlet sizes: 1 ¼" F NPT, 1 ¼" F BSPTOutlet sizes: 1" F NPT, 1 ¼" F NPT, 1" F BSPT,1 ¼" F BSPT

• 100% water tested for accuracy atSenninger’s facilities


• Can be installed above or below ground

• Two-year warranty on materials,workmanship and performance

FEATURES:• Regulator maintains a constant preset outlet


• Inlet sizes: 2" F NPT x 2" F NPT or Outlet sizes: 2" F BSPT x 2" F BSPT

• Compact size fits in a valve box

• 100% water tested for accuracy at Senninger’s facilities

• Very low hysteresis and friction loss

• Large flow path resists plugging

• Corrosion resistant


Assemblies Riser Adapter RISER ADAPTER WINSIPP2 IRRI-MAKER/IRRIEXPRESS

FEATURES

• No gluing or fusing required

• Suitable for sprinkler or spray nozzles with a 1/ 2" NPT male base connection

• Components available for 0.345" and 0.270" PE tubing

• Riser adapter suitable for the 14" or 26" Riser Stakes as well as ½" PVC, ¾" PVC, or 5/16" steel rod

Senninger Riser Adapter Assemblies make irrigating easier in hard to reach places and is ideal for temporary and portable systems. They are connected to the laterals allowing the sprinklers on each to be repositioned as needed.

Punch Tools

TUPTAP4I - (green handle) for use w/ FTA1B1B

TUPTAP5I - (red handle) for use w/ FTA15B15B, FTHS2T, FTHS3T, FT1M2T, FT4HSC2T

CO

MP

ON

ENTS

mini-Wobbler 1/ 2" base

RISER ADAPTER ASSEMBLIES

Tubing: 0.270" I.D./ 0.350 O.D. (black)

Riser Adapter Quick-Connect 0.270" I.D. Tubing model 1/ 2" F NPT x #2 taper

Fitting: 0.270" Super barb x #2 taper

Fitting: 0.270" Super barb x #2 taper

Fitting: Winged Hose barb Bushing x #2 Taper

Fitting: 0.270" Super barb x Hose barb Insert Adapter

Riser Adapter 0.270" I.D. Tubing model 1/ 2" F NPT x 0.270" Compression

Fitting: Barb Bushing Clamp for 1" Hose x #2 Taper

Fitting: Winged ¼" M NPT Threaded Bushing x #2 Taper

Components are also available for 0.345" tubing.

Riser Stake: 14" or 26" height (for tubing or riser adapter)

Friction loss through the entire assembly: – including 3 ft (0.9 m) of 0.270" ID PE tubing – is 6.3 psi at 2.0 gpm (0.43 bar at 454 L/hr). – including 3 ft (0.9 m) of 0.345" ID PE tubing – is 1.7 psi at 2.0 gpm (0.117 bar at 454 L/hr).

Contact technical support for friction loss on flows greater than 2 gpm (454 L/hr) or tubing lengths greater than 3 ft (0.9 m). Punch tools also available, see pg.44


SOFTW

AR

E

Irri-Maker™

WINSIPP2 IRRI-MAKER/IRRIEXPRESS

CALL FOR INFORMATION ON PURCHASING THIS PROGRAM

FEATURES• All in one software package: combines

surveyed data, CAD, Digital Terrain Modeling (DTM) and irrigation calculation functions

• Generates contour plans and 3D images illustrating the irrigation design in relation to slopes and elevations

• Calculate hydraulics, pressures, flows and quantities

• Full graphical control over each element of the design, including block areas, sprinklers, and pipes

• Saves time on repeatable routines

• Allows importation of information from many other programs

YOU CAN LEARN MORE ABOUT IRRIEXPRESS AND EVEN DOWNLOAD A DEMO ONLINE AT WWW.IRRIEXPRESS.COM

Irri-Maker and IrriExpress let you design comprehensive irrigation projects ranging from large-scale agricultural designs to small-scale landscape designs. Both programs let users evaluate installation alternatives in advance, survey any terrain, produce a contour plan, draw the details, and apply the irrigation design.

IRRIEXPRESS is a lighter version of Irri-Maker that is simple enough for beginners yet powerful enough for experts. It seamlessly imports topography data from Google Maps and lets you design over your defined area’s elevation points. It includes a familiar user interface and highly intuitive features like copy and paste and undo and redo, which help you navigate through the program with ease.

IrriExpress™

IRRI-MAKER can be used for everything from simple irrigation designs to complex systems and provides full control over irrigation system design. Its built-in CAD module lets you add specific details to the contour plan like roads, fences, boundaries, rivers, and trees, including text and bitmap images. Irri-Maker also operates within the larger Model Maker™ environment. This means any of the other Model Maker modules can be added to your software package.

3D design of leaching pad.

Terrain modeling of excavation area.


SOFT

WA

RE

Mining WinSIPP™

WINSIPP IRRI-MAKER/IRRIEXPRESS

FEATURES• Aids in the selection of the best irrigation products for each

particular soil and installation type.

• Tests the application uniformity of sprinkler layouts before the system is installed

• Compares different spacings, sprinkler models, nozzle sizes, and operating pressures to determine which would be best for your specific application.

• Sprinkler profile uses specific data and illustrates the amount of water that would be delivered at various intervals, the application radius, and the water distribution of multiple overlapping devices.

Use WinSIPP software by Senninger to calculate the precipitation rate of your irrigation system.

Sprinkler profiles illustrate the amount of water that would be delivered at various intervals as well as the radius of throw.

DENSOGRAMData from distribution profiles is used to create densograms based on spacing dimensions, layout, and riser height. Densograms are useful in illustrating the uniformity of water distribution by multiple overlapping devices.

DISTRIBUTION PROFILEA distribution profile is the illustration of the results from "catch can" tests performed in accordance with the American Society of Agricultural and Biological Engineers (ASABE) standard S398.1. This data shows how uniformly a device distributes water within its diameter of throw. WinSIPP2 utilizes the numerous distribution profiles available for Senninger products.

Graphics illustrate the water application pattern in 3-D format.

ASK FOR THIS PROGRAM BY CONTACTING THE SENNINGER TECHNICAL SUPPORT DEPARTMENT.

Profiles illustrate the coefficient of uniformity, distribution uniformity, and the scheduling coefficient to determine which spacing would be optimum.

Densograms illustrate the uniformity, wetted diameter, and application pattern of a given profile.


Nozzles NOZZLES WARRANTY

Nozzle #Nozzle color

Nozzle SizeUS

Nozzle SizeMetric

#2 Pink 1/32" (0.031) 0.79 mm#2.5 Pink 5/128" (0.039) 0.99 mm

#3 Ice 3/64" (0.047) 1.19 mm#3.5 Ice 7/128" (0.055) 1.4 mm

#4 Light Blue 1/16" (0.063) 1.59 mm#4.5 Light Blue 9/128" (0.070) 1.78 mm

#5 Beige 5/64" (0.078) 1.98 mm#5.5 Beige 11/128" (0.085) 2.16 mm

#6 Gold 3/32" (0.094) 2.38 mm#6.5 Gold 13/128" (0.102) 2.59 mm

#7 Lime 7/64" (0.109) 2.78 mm#7.5 Lime 15/128" (0.117) 2.97 mm

#8 Lavender 1/8" (0.125) 3.18 mm#8.5 Lavender 17/128" (0.133 3.38 mm

#9 Grey 9/64" (0.141) 3.57 mm#9.5 Grey 19/128" (0.148) 3.76 mm

#10 Turquoise 5/32" (0.156) 3.97 mm#10.5 Turquoise 21/128" (0.164) 4.17 mm

#11 Yellow 11/64" (0.172) 4.37 mm#11.5 Yellow 23/128" (0.180) 4.57 mm

#12 Red 3/16" (0.188) 4.76 mm#12.5 Red 25/128" (0.195) 4.95 mm

#13 White 13/64" (0.203) 5.16 mm#13.5 White 27/128" (0.211) 5.36 mm

#14 Blue 7/32" (0.219) 5.56 mm#14.5 Blue 29/128" (0.227) 5.77 mm

#15 Dark Brown 15/64" (0.234) 5.95 mm#15.5 Dark Brown 31/128" (0.242) 6.15 mm

#16 Orange 1/4" (0.250) 6.35 mm#16.5 Orange 33/128" (0.258) 6.55 mm

#17 Dark Green 17/64" (0.266) 6.75 mm#17.5 Dark Green 35/128" (0.273) 6.93 mm

#18 Purple 9/32" (0.281) 7.14 mm#18.5 Purple 37/128" (0.289) 7.34 mm

#19 Black 19/64" (0.297) 7.54 mm#19.5 Black 39/128" (0.305) 7.75 mm

#20 Dark Turquoise 5/16" (0.313) 7.94 mm#20.5 Dark Turquoise 41/128" (0.320) 8.13 mm

#21 Mustard 21/64" (0.328) 8.33 mm#21.5 Mustard 43/128" (0.336) 8.53 mm

#22 Maroon 11/32" (0.344) 8.73 mm#22.5 Maroon 45/128" (0.352) 8.94 mm

#23 Cream 23/64" (0.359) 9.13 mm#23.5 Cream 47/128" (0.367) 9.32 mm

#24 Dark Blue 3/8" (0.375) 9.53 mm#24.5 Dark Blue 49/128" (0.383) 9.73 mm

#25 Copper 25/64" (0.391) 9.92 mm#25.5 Copper 51/128" (0.398) 10.11 mm#26 Bronze 13/32" (0.406) 10.32 mm

Nozzle and vane combinations are a critical factor in how a sprinkler performs. Senninger offers a wide range of nozzle and vane options to customize sprinklers for peak performance.

FEATURES

• Color-coded for easy size identification*

• Excellent durability

RESO

UR

CES

* mini-Wobbler nozzle colors vary from those shown above, see page 2.


Product Warranty

RES

OU

RC

ES

WARRANTY & DISCLAIMER

This warranty supersedes all other warrantiesexpressed or implied. No person has theauthority to incur or assume for SenningerIrrigation, Inc. (“Senninger”) any other liabilityas to the products manufactured by Senninger.

This warranty does not extend to any productor part that has been repaired, altered, ormodified in any way outside the Senningerfactory, nor shall it apply to any product whichhas been subject to misuse, negligence oraccident, or improper operation contrary to Senninger’s published instructions. Underno circumstances will Senninger be heldresponsible or liable for any consequential,incidental or punitive damages resultingfrom the use of Senninger products, orresulting from any product defects, failure ormalfunction.

This warranty extends only to the originalpurchaser of the Senninger product. Thiswarranty does not extend to any product orpart manufactured by others.

MATERIALS AND WORKMANSHIP

Products manufactured by Senninger for usein mining applications are warranted to be freeof defects in materials or workmanship undernormal use for a period of one (1) year from thedate of manufacture.

PERFORMANCE

Products manufactured by Senninger for use inmining applications are warranted to maintaintheir original performance for a period of one(1) year from the date of manufacture ifinstalled and operated in accordance withSenninger’s published specifications and usedas intended for irrigation purposes.

REPAIR OR REPLACEMENT

If a Senninger product is suspected of failureduring the applicable warranty period,Senninger will repair or replace, at its option,the product or the defective part. ContactSenninger customer service in Clermont,Florida USA for specific instructions on howto proceed with a warranty claim. If afterinspection of the product and documentation

NOZZLES WARRANTY

the failure is deemed a warranty issue, areplacement or credit will be authorized.Senninger is not obligated to pay for repairs or replacements made by anyone other thanitself. No labor allowances will be made forremoval or replacement of warranted parts nor for any travel to and from the product to make said repairs or replacement without prior written authorization from Senninger.

SUITABILITY

There are no other warranties, expressedor implied, including warranties ofmerchantability and warranties of fitness for a particular purpose. It is the sole responsibility of the purchaser to consider and analyze the product and its design to be suitable for specific applications.

MS80319 MC 10

Senninger’s commitment to world-class products, local support and

technical expertise ensure we provide the most efficient and reliable

agricultural irrigation solutions available in the world today.

Stephen D. Abernethy, President of Senninger Irrigation

SENNINGER IRRIGATIONA Hunter Industries Company

Website senninger.com | Customer Support 407-877-565513505 Granville Ave., Clermont, FL 34711

Date post:	01-Mar-2021
Category:	Documents
Upload:	others
View:	2 times
Download:	0 times

Solution Mining - Senninger Irrigation...n Xcel-Wobbler 05 SPRAYS n Super Spray 07 IMPACT SPRINKLERS...

Documents