Solutions that EmpowerDigital Transformation An “Un-Presentation”
John Weber
X-Change 2018– Slide # 1
X-Change 2018 – Slide # 2
What Would You Like to Discuss?
1. TOP Server– What it is– What’s new
2. TOP Server Telemetry Features
3. OmniServer– Where to use– What’s new?
4. Cogent DataHub– Data Multitool
5. Galaxy Toolbox– What’s new
Empowering Digital Transformation
Since 1996
What is TOP Server?
X-Change 2018 – Slide # 3
One Install
One *.EXE
Many types of
driversWrap Other I/O
Servers
Advanced
Functionality
Most Industry
Std Protocols
Most Client
Connections
softwaretoolbox.com/topserver
X-Change 2018 – Slide # 4
TOP Server Gets You Connected – 100+ Drivers!• AB Bulletin 1609 UPS
• AB Bulletin 900 Temp. Controllers
• ABB Totalflow Serial
• AB Micro800 Serial & Ethernet
• AB ControlLogix Ethernet & Gateway
• AB ControlLogix Unsolicited Ethernet
• AB PLC5,SLC5/05 Ethernet
• AB DF1 Full/Half-Duplex/Radio Serial
• AB Data Highway Plus (DH+)
• Alstom Redundant Ethernet
• Advanced Simulator
• Analog Devices 6B
• Aromat Serial & Ethernet
• Automation Direct DirectNet Serial
• Automation Direct K-Sequence Serial
• Automation Direct ECOM Ethernet
• Automation Direct P3000
• Automation Direct EBC Ethernet
• BACnet
• Bailey Fisher & Porter Micro-DCI
• Beckhoff TwinCAT
• Bristol/IP Ethernet
• BUSWARE Ethernet I/O
• CODESYS Ethernet
• Contrex/Fenner CX1000
• Custom Interface Driver (CID)
• Cutler Hammer D50/100
• Mitsubishi A Series Serial
• Mitsubishi A Series Ethernet
• Mitsubishi Q/QnA Series Ethernet
• Modbus RTU & ASCII Serial Master
• Modbus RTU Serial RTU Slave
• Modbus Plus
• Modbus Ethernet Master & Slave
• MTConnect Client
• ODBC Client Driver
• Omni Flow Computer
• Omron Hostlink & FINS Serial
• Omron Process Suite
• Omron FINS Ethernet
• Omron NJ Ethernet
• OPC DA / UA / XML-DA Client
• Optimation OptiLogic I/O• Opto 22 Ethernet• Oracle Connectivity Suite• Partlow ASCII Serial• Philips PC8/PC20• Red Prairie Logistic Systems• Sattbus & Sattbus Ethernet• Scanivalve Ethernet• Siemens S5 AS-511 • Siemens 3964R• Siemens S7-200 PPI & Modem• Siemens S7-300/400 MPI• Siemens S7-200/300/400 Ethernet
• Cutler Hammer ELC
• Danfoss AKC55 Serial
• Dataforth IsoLynx
• DDE Server to OPC Client Bridge
• DeviceNet/Profibus (HilscherUniversal)
• DNP3 Serial + Ethernet
• Enron Modbus Serial
• Fisher ROC & ROC Plus
• Fuji Flex PLCs
• GE Focas1 Ethernet
• GE SRTP Ethernet
• GE EGD Ethernet
• GE CCM Serial
• GE SNP
• GE SNP-X Serial
• Honeywell UDC & HC900
• Idec Micro
• IEC 60870-5-101 Master Serial
• IEC 60870-5-104 Master Ethernet
• IEC 61850 MMS Client
• Intelligent Actuator SuperSEL
• IOTech PointScan Ethernet
• KraussMaffei MC4 Ethernet
• Lufkin Modbus Serial
• Mettler Toledo Scale Serial
• Mitsubishi FX Serial Prog.Port
• Mitsubishi FX-Net Multidrop Serial
• Siemens S7-300 Ethernet Slave • Simatic/TI 5x5 Ethernet • Simatic/TI 5x5 Serial• Simatic/TI Unilink TIWAY • Sixnet UDR & Ethertrak I/O• Simulator Suite• SquareD Serial• System Monitor• Telemecanique Unitelway• Thermowestronics Serial+Ethernet• Torque Tool Ethernet• Toyopuc PC2 Serial & PC2/PC3 Ethernet• Toshiba PLCs Serial + Ethernet• Triconex TSAA Ethernet• User Configurable Driver (UCON)• Wago 750 Ethernet I/O• Weatherford 8500 Serial• WITS Level 0 (Active & Passive)• Wonderware Intouch Client• Yaskawa MemoBus Plus• Yaskawa MP Serial & Ethernet• Yokogawa CX• Yokogawa DX100/200 & Darwin Serial• Yokogawa DX(P)100/200 • Yokogawa Darwin Ethernet• Yokogawa DXP• Yokogawa HR• Yokogawa MW• Yokogawa MX• Yokogawa YS100 Serial
Plug-Ins• Advanced Tag• Connection Sharing• Data Logger• Local Historian• Media-Level
Redundancy• OPC Alarms & Events• Oracle Connector• Real-Time Scheduler• SNMP Agent
Vertical Industry Suites• Building Automation• IT & Infrastructure• Manufacturing• Oil& Gas• Power Distribution
EFM Suite (Electronic Flow Measurement)• EFM Exporter Plug-In• Omni Flow Computer• Enron Modbus Serial• Fisher ROC Suite• ABB Totalflow Serial• EFM Simulator
softwaretoolbox.com/topserver
Compatibility
X-Change 2018 – Slide # 5
All current Wonderware Versions Supported
Windows 7, Windows 8, 8.1, Windows 10Windows Server 2008, 2008 R2
Windows Server 2012, 2012R2, 2016
Windows 7 Standard Embedded
32 and 64-bit OS Support
Hyper-V & VMWare Supported
Remote Desktop/Terminal Services/ACP ThinMan Supported
Marathon and Stratus High Availability Supported
HistorianInTouchSystem
Platform
softwaretoolbox.com/topserver
Release Cadence 2018 (3x Year)
V6.4V6.5
V6.6V6.7
V6.8
Dec 2017May 2018
Q3 2018 Q4 2018 Q1 2019
All 2018 dates are +/- 1 month
Value Delivered to TOP Server Support Agreement Holders
X-Change 2018 – Slide # 6
TOP Server V6.2
• Codesys V3 Support– Big for Food & Bev, Pharma, Packaging
Machinery Connectivity!
• Siemens Ethernet – Auto Tag Generation from TIA Portal (S7-1200/1500 & S7-300/400)
• Siemens Plus Suite – the only Siemens approved way for S7-1500 integration
• Expanded Mitsubishi Model support • Bacnet Driver Improvements• API Enhancements • Normal bug fixing & incremental
improvements
7
Examples: Festo CPX ControllerModicon Altivar 71Advantech ADAM 5560CDSModicon M241Wago 750-8100More: http://devices.codesys.com/device-directory.html
http://blog.softwaretoolbox.com/topserver-v62-new-features
TOP Server V6.3
• Keyence – New Driver– Native KV Protocol
• Improvements to – Beckhoff Driver– OPC UA Client Driver
• Ability to disable auto-tag generation
• API Enhancements• Normal bug fixing & incremental
improvements
8
•KV-5000•KV-5500•KV-3000
•KV-7300•KV-7500•KV-Nano
http://blog.softwaretoolbox.com/topserver-v63-new-features
TOP Server V6.4
• AB ControlLogixImprovements
– Up to V30.11 firmware
• Siemens S7 Ethernet Performance Improvements
– Faster Read Performance via increased Max PDU Size and support for multi-packet arrays
9
http://blog.softwaretoolbox.com/topserver-v64-new-features
Allen-Bradley ControlLogix
TOP Server V6.4
• New MQTT Client driver(video tutorial link!)
10
http://blog.softwaretoolbox.com/topserver-v64-new-features
Very Important that this is supported!
X-Change 2018 – Slide # 11
Version 6.5 (May 2018)
• TOP Server
– V6.5 Installer Security Enhancements:
X-Change 2018 – Slide # 12
OPC Client Suite – A Rock Solid Gateway
“We spent 6 months trying to make other solutions work…we put in TOP Server OPC Client Suite and it was working in hours
-B. Larsen, Lundbeck
Connect All Types of OPC UA, XML-DA, etc
Connect To Wonderware with Suitelink or OPC DA
X-Change 2018 – Slide # 13
5 Reasons To Use TOP Server for Telemetry in Water/Wastewater, Oil & Gas
1. Deep Industry Drivers
2. Polling Engine Scheduler
3. Shared Comms Channels
4. Scan-Rate Limiting & Demand Polling
5. Auto-Demotion
X-Change 2018 – Slide # 14
1 -Deep Experience with Oil & Gas Devices
• TOP Server OPC & Suitelink Server Core• Drivers for
– Bristol/IP– Enron Modbus– Fisher ROC & ROC Plus Serial– Lufkin Modbus (ELAM)– Modbus ASCII, RTU, & TCP/Ethernet w/highly
flexible options– Omni Flow Computer– WITS Level 0 Active & Passive– Weatherford 8500 protocol serial– User Configurable Driver– Custom Interface Driver (CID)
2 - Scheduler
Scheduler takes lumpy polling traffic and helps you spread it out
Great for any 3G/4G telemetry application
X-Change 2018 – Slide # 15
3 - Shared protocols over same serial port
• Multiple field device protocols, one radio network
• Very important for water/wastewater industry and any highly distributed system
X-Change 2018 – Slide # 16
4 - Flexibility: Scan Rate Control
• Each device gets own settings
• Protect the telemetry network
5 - Auto-Demotion
• Keeps scan cycles responsive
• System tags allow runtime tuning from any HMI
TOP Server .NET API
• Single.NET library now available for licensing!
• Objects for channel, device, group, tag settings
• Simple Methods for Engineers!– SetHostAuth (your TOP Server login)
– GetList (i.e list of channels)
– GetProperties (i.e. of an object)
– Add – Update– Delete
http://www.softwaretoolbox.com/topserverv6/api
KEEP IT SIMPLE!
X-Change 2018 – Slide # 19
API Demo - Mass Configuration
• Goal, build lots of channels and devices, FAST!
X-Change 2018 – Slide # 20
Mass Configuration Video
X-Change 2018 – Slide # 21
Event Log to SQL
• Goal: consolidate TOP Server Event logs into any SQL database– w/ optional filtering
– For reporting, analysis
– Fault finding
X-Change 2018 – Slide # 22
Redundant Server Sync Utility
X-Change 2018 – Slide # 23
X-Change 2018 – Slide # 24
MDT AutoSave and TOP Server
X-Change 2018 – Slide # 25
MDT AutoSave and TOP Server
X-Change 2018 – Slide # 26
Keep Up with TOP Server!
http://blog.softwaretoolbox.com/topic/top-server
Connecting The Rest of Your Devices
Linear Scalesi.e. Mitutoyo,
Digimatic
Bar Code Scanners
i.e. Intermec, Symbol, Z-Tron
Measuring Systems
Message Displays &
Scoreboards
Barcode Printers Gas analyzers
Mass Spectrometers
Combustion Analyzers
Gas Chromatographs
Laser MarkingSystems
Ethernet: TCP/IP, UDP, Telnet, RS-232, RS-422, RS-485
Weigh Scales
Historian System
PlatformInTouch InBatchInTouch
Machine EditionMES Recipe
Manager
InTouch Access
Anywhere
Typical Solutions Chosen by Users and Integrators1. Custom Code/Applications 2. Hardwired Interfaces to controller if possible3. Choose different hardware with standard I/F4. Don’t Integrate
All of these are1. Costly2. Risky3. Suboptimal for
Operations Needs
X-Change 2018 – Slide # 27
OmniServer Connects Them
• Proven solution
• 1000’s of installs
• No User Coding Required
• Field proven since 1995
• Strong installed base in the Wonderware market
Historian
System
Platform
InTouch
InBatch
MES
X-Change 2018 – Slide # 28
X-Change 2018 – Slide # 29
Omniserver – Accelerating Development
• Full Agile on this product
• Releases about every other month with improvements!
• 2018 so far 3 releases!
• Click for Release history
X-Change 2018 – Slide # 30
OmniServer New Protocol Builder UI
• New .NET Style UI
• DockableWindows
• Drag/Drop Protocol Building
• Save Favorite or common sequences
X-Change 2018 – Slide # 31
OmniServer New Training Guides
• Request free copy at http://info.softwaretoolbox.com/omniserver-protocol-guide
• Blog post series of technical tips
– http://blog.softwaretoolbox.com/topic/omniserver
Cogent DataHub
• The “Multi-tool” of OPC and Automation Data
• Making connecting and integrating data from about anything, with Wonderware, quick and easy
X-Change 2018 – Slide # 32
X-Change 2018 – Slide # 33
Cogent DataHub – Visit The Blog for Innovative Stories
• OPC Protocol Gateway
• OPC to Excel
• Namibia Brewing sustainable manufacturing
• 34 more innovative applications at– http://blog.softwaretoolbox.com/topic/datahub
Galaxy Toolbox
• Reduced Engineering Time
• Reduced errors• Improved
troubleshooting tools
System
PlatformInTouch
softwaretoolbox.com/galaxytoolbox
✓ 2014✓ 2014R2✓ 2017✓ 2017
Update1
X-Change 2018 – Slide # 34
Galaxy Toolbox - Status View
X-Change 2018 – Slide # 35
Quickly and easily find ArchestrAautomation and graphic objects by status – with full editing capabilities!
softwaretoolbox.com/galaxytoolbox
http://blog.softwaretoolbox.com/video-tutorial-status-view
Galaxy Toolbox Application Insight
X-Change 2018 – Slide # 36
http://blog.softwaretoolbox.com/process-diagrams-4-archestra
X-Change 2018 – Slide # 37
Galaxy Toolbox – Easy To License
• Perpetual License w/support
– Standard – Status view only
• Less than cost of about 10 hours of engineering
– Enterprise – Bulk Import + Status View
• Less than cost of about 25 hours of engineering
• Optional Subscription Pricing
X-Change 2017 – Slide # 38
Stay In Touch – blog.softwaretoolbox.com
• Tech tips
• Product announcements
• Training videos
• Subscribe now!
X-Change 2017 – Slide # 39
Conclusion
• You’ve seen– TOP Server
– Omniserver
– Cogent DataHub
– Galaxy Toolbox
• Don’t forget knowledgebase at support.softwaretoolbox.com
• And Local Download site www.softwaretoolbox.co.za
X-Change 2018 – Slide # 40
• Extra content follows this slide
Food Packaging Proof Point
• Wonderware MES Global Implementation
• Standardized on OmniServer for all connectivity to these device types
• Can Printers• Barcode printers• Weigh bridges• Weigh Scales• Barcode readers
X-Change 2018 – Slide # 41
Redundant Server Sync Utility
X-Change 2018 – Slide # 42