Date post: | 01-Dec-2014 |
Category: |
Documents |
Upload: | greg-hamilton |
View: | 200 times |
Download: | 2 times |
Sony EMCS Co.DSC-S730 2008G0200-1
© 2008.07Published b y Kohda TEC9-852-239-12
Revision HistoryRevision History
Internal memoryON BOARD
Internal memoryON BOARD
SERVICE MANUAL
LinkLink
SERVICE NOTE
SPECIFICATIONS
BLOCK DIAGRAM
DISASSEMBLY REPAIR PARTS LIST
Ver. 1.1 2008.07
DIGITAL STILL CAMERA
US ModelCanadian Model
AEP ModelUK Model
E ModelAustralian Model
Hong Kong ModelChinese Model
Korea ModelTourist Model
The components identified bymark or dotted line withmark are critical for safety.Replace only with part num-ber specified.
Les composants identifiés par unemarque sont critiques pour lasécurité.Ne les remplacer que par une pièceportant le numéro spécifié.
DSC-S730
In case of the lens block assy, main board, or main frame assembly failure,contact your local Sony Service Headquarter for the measures.
Revised-1Replace the previously issuedSERVICE MANUAL 9-852-239-11with this Manual.
DSC-S730— 2 —
SPECIFICATIONS
Design and specifications are subject to changewithout notice.
[LCD screen]LCD panel: 6.0 cm (2.4 type) TFT driveTotal number of dots: 112 320 (480×234) dots
[Power, general]Power: LR6 (size AA) Alkaline batteries (2), 3 V
HR15/51:HR6 (size AA) Nickel-Metal Hydride batteries (2) (not supplied), 2.4 VZR6 (size AA) Oxy Nickel Primary Battery (2) (not supplied), 3 VAC-LS5K AC Adaptor (not supplied), 4.2 V
Power consumption (during shooting): 1.2 WOperating temperature: 0 to 40 C (32 to 104 F)
F)Storage temperature: –20 to +60 C (–4 to +140Dimensions: 91.4×61.0×29.1 mm (3 5/8×2 1/2×
1 3/16 inches) (W/H/D, excluding protrusions)
Mass: Approx. 189 g (6.7 oz) (including two batteries and strap, etc.)
Microphone: MonauralBuzzerExif Print: CompatiblePRINT Image Matching III: CompatiblePictBridge: Compatible
[System]Image device: 7.20 mm (1/2.5 type) color CCD,
Primary color filterTotal pixel number of camera:
Approx. 7 410 000 pixelsEffective pixel number of camera:
Approx. 7 201 000 pixelsLens: 3× zoom lens f = 5.8 – 17.4 mm (35 –
105 mm when converted to a 35 mm still camera) F2.8 (W) – 4.8 (T)
Exposure control: Automatic exposure, Scene Selection (7 modes)
White balance: Automatic, Daylight, Cloudy, Fluorescent, Incandescent, Flash
File format (DCF compliant): Still images: Exif Ver. 2.21 JPEG compliant, DPOF compatibleMovies: AVI (Motion JPEG)
Recording media: Internal Memory (approx. 22 MB), "Memory Stick Duo"
Flash: Flash range (ISO sensitivity (Recommended Exposure Index) set to Auto): approx. 0.5 to 3.5 m (1 feet 7 3/4 inches to 11 feet 5 7/8 inches) (W)/approx. 0.5 to 2.0 m (1 feet 7 3/4 inches to 6 feet 6 3/4 inches) (T)
[Input and Output connectors] (USB) A/V OUT terminal:
Video, Audio (Monaural), USB communication
USB communication: Hi-Speed USB (USB 2.0 compliant)
— 3 —DSC-S730
SAFETY-RELATED COMPONENT WARNING!!
COMPONENTS IDENTIFIED BY MARK OR DOTTED LINE WITHMARK ON THE SCHEMATIC DIAGRAMS AND IN THE PARTSLIST ARE CRITICAL TO SAFE OPERATION. REPLACE THESECOMPONENTS WITH SONY PARTS WHOSE PART NUMBERSAPPEAR AS SHOWN IN THIS MANUAL OR IN SUPPLEMENTSPUBLISHED BY SONY.
ATTENTION AU COMPOSANT AYANT RAPPORTÀ LA SÉCURITÉ!
LES COMPOSANTS IDENTIFÉS PAR UNE MARQUE SUR LESDIAGRAMMES SCHÉMATIQUES ET LA LISTE DES PIÈCES SONTCRITIQUES POUR LA SÉCURITÉ DE FONCTIONNEMENT. NEREMPLACER CES COMPOSANTS QUE PAR DES PIÈSES SONYDONT LES NUMÉROS SONT DONNÉS DANS CE MANUEL OUDANS LES SUPPÉMENTS PUBLIÉS PAR SONY.
1. Check the area of your repair for unsoldered or poorly-solderedconnections. Check the entire board surface for solder splashesand bridges.
2. Check the interboard wiring to ensure that no wires are"pinched" or contact high-wattage resistors.
3. Look for unauthorized replacement parts, particularlytransistors, that were installed during a previous repair. Pointthem out to the customer and recommend their replacement.
4. Look for parts which, through functioning, show obvious signsof deterioration. Point them out to the customer andrecommend their replacement.
5. Check the B+ voltage to see it is at the values specified.6. FLEXIBLE Circuit Board Repairing
Keep the temperature of the soldering iron around 270 Cduring repairing.Do not touch the soldering iron on the same conductor of thecircuit board (within 3 times).Be careful not to apply force on the conductor when solderingor unsoldering.
Unleaded solderBoards requiring use of unleaded solder are printed with the lead-free mark (LF) indicating the solder contains no lead.(Caution: Some printed circuit boards may not come printed withthe lead free mark due to their particular size.)
: LEAD FREE MARKUnleaded solder has the following characteristics.
Unleaded solder melts at a temperature about 40 C higher thanordinary solder.Ordinary soldering irons can be used but the iron tip has to beapplied to the solder joint for a slightly longer time.Soldering irons using a temperature regulator should be set toabout 350 C.Caution: The printed pattern (copper foil) may peel away if theheated tip is applied for too long, so be careful!Strong viscosityUnleaded solder is more viscous (sticky, less prone to flow) thanordinary solder so use caution not to let solder bridges occur suchas on IC pins, etc.Usable with ordinary solderIt is best to use only unleaded solder but unleaded solder mayalso be added to ordinary solder.
SAFETY CHECK-OUT
After correcting the original service problem, perform the following
safety checks before releasing the set to the customer.
CAUTIONDanger of explosion if battery is incorrectly replaced.Replace only with the same or equivalent type.
— 4 —DSC-S730
TABLE OF CONTENTS
1. SERVICE NOTE1-1. Process After Fixing Flash Error ·····································1-11-2. Method for Copying or Erasing the Data in Internal
Memory···········································································1-1
2. DISASSEMBLY2-1. Disassembly·····································································2-1
3. BLOCK DIA GRAM3-1. Overall Block Diagram···················································3-1
4. REPAIR PARTS LIST4-1. Exploded Views·······························································4-14-1-1. Overall Section······························································4-14-1-2. Main Frame Block·························································4-24-1-3. Lens Block·····································································4-34-2. Accessories······································································4-4
Section Title Page
The changed portions fromVer. 1.0 are shown in blue.
Ver. 1.1 2008.07
1-1DSC-S730
The data can be copied/erased by the operations on the Setup screen. (When erasing the data, execute formatting the internal memory.)
Note: When replacing the camera, erase the data in internal memory of the board before replacement.
Method for Copying the Data in Internal Memory
Method for Formatting the Internal Memory
1. SERVICE NOTE
1-1. PROCESS AFTER FIXING FLASH ERROR
Method for Initializing the Flash Error
1-2. METHOD FOR COPYING OR ERASING THE DATA IN INTERNAL MEMORY
Initializes the setting to the default setting.Even if you execute this function, the images stored in the internal memory are retained.
1 Select [OK] with v on the control button, then press z.The message "Initialize all settings Ready?" appears.
2 Select [OK] with v, then press z.The settings are reset to the default setting.
To cancel initializingSelect [Cancel] in step 1 or 2, then press z.
Be sure not to power off the camera while initializing.
Initialize
Copies all images in the internal memory to a "Memory Stick Duo".
1 Insert a "Memory Stick Duo" having sufficient free capacity.
2 Select [OK] with v on the control button, then press z.The message "All data in internal memory will be copied Ready?" appears.
3 Select [OK] with v, then press z.Copying starts.
To cancel copyingSelect [Cancel] in step 2 or 3, then press z.
Use batteries with enough power remaining. If you attempt to copy image files using batteries with little remaining charge, the batteries may run out, causing copying to fail or possibly corrupting the data.You cannot select images to copy.The original images in the internal memory are retained even after copying. To delete the contents of the internal memory, remove the "Memory Stick Duo" after copying, then format the internal memory ([Format] in [Internal Memory Tool]).A new folder is created on the "Memory Stick Duo" and all the data will be copied to it. You cannot choose a specific folder and copy images to it.The (Print order) marks on the images are not copied.
Copy
This item does not appear when a "Memory Stick Duo" is inserted in the camera.
Formats the internal memory.Note that formatting permanently erases all data in the internal memory, including even protected images.
1 Select [OK] with v on the control button, then press z.The message "All data in internal memory will be erased Ready?" appears.
2 Select [OK] with v, then press z.The format is complete.
To cancel formattingSelect [Cancel] in step 1 or 2, then press z.
Format
2-1DSC-S730
5
1
2
3
4
1 Open the BT LID
4
5 CABINET (REAR) ASSY
2 SCREW M 1.7 X 2.7
3 SCREW TP 1.7 X 4
SCREW TP 1.7 X 3.5
1
23
4
1
LCD
2
LCD PLATE
3
SCREW TP 1.4 X 3.5
4
SCREW TP 1.4 X 4
3
1
2
1
CABINET (FRONT) ASSY
2 SCREW TP 1.4 X 2.5
3
SCREW TP 1.4 X 3
1
2
3
1 BT LID SHAFT
(To 2-2 Page)
2 BT LID
3 BT LID SPRING
Note : When CABINET(FRONT) ASSY is removed, the plate will bends if CABINET(FRONT) ASSY is inclined too much. Please remove CABINET (FRONT) ASSY as in parallel as possible.
plate
2-1. DISASSEMBLY
2. DISASSEMBLYThe following flow chart shows the disassembly procedure.
Shorting jig(1kΩ / 1W)
Caution
Note : After discharged, a transparent seal is put again. Do not lose the transparent seal removed when discharged.
(From 2-1 Page)
HELP02
HELP02
HELP01
HELP03
HELP01
DSC-S7302-2
The changed portions fromVer. 1.0 are shown in blue.
Ver. 1.1 2008.07
Be careful about the Lens Assy.
Attach the Block assy protection sheet as shown.
Don't press the Sensor holder
Don't press the AF Motor
Keep clean these Pins.
Attach the Block assy protection sheet avoiding three screw holes.
Block assyprotection sheet
Don't press the Barrier part.
HELP01
HELP02
HELP03
HELPDSC-S730
HELP
Ver. 1.1 2008.07
-7.5V
VP
FLASH_VP
-7.5V
12
R131100K
BATT+2
12
C187
R7X_
V52_K
P00 01
12F5 1A/30V
12
R5X_
V61_K
U1. 0
C186
R5X_
V61_K
U1. 0
12
F3 1.6A/36V
2
13
Q42AO3415
BATT-2 12
C160
R5X_
V61_K
U 1. 0
2
13
Q29AO3415
12
R163100K1
2X_
V52_K
P00 01
C159
R7X_V52_
KP00 01
3-1DSC-S730
3-1. OVERALL BLOCK DIA GRAM
3. BLOCK DIA GRAMThe changed portions fromVer. 1.0 are shown in blue.
Ver. 1.1 2008.07
P X C LKHDV DC DS _E NS C LKS DA T AA F E RS TT G _E NV S UB _C on1V S UB _C on2C C D_O NT G _O NC DS _O NC C D[0..11]
LE NS _P SS HUT T E R_M1S HUT T E R_M0
F O C US _P IZ O O M_P RZ O O M_P ILE NS _S DA T ALE NS _S C LKLE NS _E N
LC D_HDLC D_V D
LC D_E NLC D_MC LK
LC D_S C LKLC D_S DA T A
LC D[0..7]MLC D_O N
B L
US B _DE TA V _DE TV IDE O _O UTLINE _O UTB E E P E R
D+D-
F A 23F A 20F A 22F A 21
MD[0..7]
WEWP
R/B
A LEC E 0REMS _C LK
C LEMS _INS #
S T A _LE D
S W_T E LE
S W_WIDE
S W_K E Y _A DC
P WR_C T RL
C C D_O N
F LA S H_RDYF LA S H_C HG _LS T RO B E _T RGS T RO B E _C HG
RA MC A SRA MRA S
RA MLDQ SRA MUDQ S
RA MUDMRA MC LK _N
RA MC LKRA MC LK _E N
RA MC S _N
RA MWE _NRA MLDM
RA MD[0..15]RA MA [0..14]
RA MRE F
DG ND
DG ND
DG ND
+5V M
+13.4V
+5V M
DG ND
DG ND
DG ND
DG ND
DG ND
+3.3V
-7.5V
+13.4V
+3.1V D
+3.1V D
B A T _LO A DP WRK E Y
P WR_K E Y
P WR_O N
V P
-7.5V
+2.5V D
+3.3V
+3.1V D
+5V M
+1.8V D
F LA S H_V P
+3.1V D
+2.5V D
DG ND
+1.8V D
+3.1V D
+2.5V D
+3.3V
+3.3V S
V P
UG ND
+3.1V D
DG ND
+3.1V D
+5V M+3.1V D
S W_P LA Y B A C K
F LA S H_V P
S T RO B E _T rg
F LA S H_RDY
S T RO B E _C HG
A F _LE D
+13.4V
B E E P E R
+3.1V D
S T RO B E _P WR
MS _O N
C C D_O N1
IN1IN2IN3IN4
S W_K E Y _A DC 1
S HUT 1S HUT 2P W_LE D
+3.1V D
DG NDDDR
DDR
DGND
+2.5VD
RAMD[0..15]RAMA[0..14]
RAMLDMRAMWE_N
RAMCASRAMRAS
RAMCS_NRAMLDQSRAMUDQS
RAMUDMRAMCLK_N
RAMCLKRAMCLK_EN
RAMREF
1 2REDRED
C DS
C DS
+3.3V
CCD[0..11]
VDCDS_EN
HD
SCLKSDATAAFERSTTG_EN
PXCLK
VSUB_Con1VSUB_Con2
-7.5V
+13.4V
CCD_ONDGND
TG_ONCDS_ON
41
32
32.768K Hz32.768K Hz
1 2
F LA S H
F LA S H
+5VM
DGND
FLASH_VP
+3.1VD STROBE_CHG
FLASH_RDYFLASH_CHG_LSTROBE_TRG
AF_LEDSTROBE_PWR
1
42
3
NCS
P1, P2
S
,
1 2GREEN
GREEN
GREEN1 2
ME MO RY
ME MO RY
MD[0..7]
CLEWEWPALECE0RE
R/B
MS_CLK
FA23FA20
MS_INS#
FA22FA21
+3.1VDMS_ON
DGND
31
42 5
6
S W
S W
+3.1VD
DGNDSW_KEY_ADC
STA_LED
SW_KEY_ADC1
P O WE R
P O WE R
CCD_ON
-7.5VPWR_CTRL
+13.4V
+2.5VD
+1.8VD
+3.3V
+3.1VD
+5VM
VP
DGND
CCD_ON1
31
42 5
6
1 2
DS P
DS P
VSUB_Con1
AFERST
VSUB_Con2
CCD[0..11]
PXCLK
SCLKSDATA
CDS_ENVD
TG_EN
HD
RAMD[0..15]
RAMREF
RAMA[0..14]
RAMCLK_EN
RAMLDQS
RAMWE_N
RAMCS_NRAMRASRAMCAS
RAMLDM
RAMUDM
LENS_EN
STROBE_CHG
SHUTTER_M0SHUTTER_M1
LENS_SCLKLENS_SDATA
LENS_PS
USB_DETD-D+
PWR_CTRL
STROBE_TRG
PWR_ON
LCD[0..7]
LCD_HDLCD_VD
LCD_SDATA
LCD_EN
LCD_SCLK
LCD_MCLK
LINE_OUTVIDEO_OUT
FLASH_CHG_L
VP
DGND
+1.8VD
+3.1VD
+2.5VD
+3.3VS
ZOOM_PI
FOCUS_PIZOOM_PR
BL
STA_LED
BEEPER
BAT_LOAD
CE0
AV_DET
MS_INS#
SW_TELE
SW_WIDE
ALE
CLE
WP
R/B
MD[0..7]
RE
MLCD_ON
WE
FA21FA22FA20FA23
MS_CLK
PWRKEY
SW_KEY_ADC
CDS_ONTG_ON
CCD_ON
FLASH_RDY
+3.3V
SW_PLAYBACK
AF_LED
RAMUDQS
RAMCLKRAMCLK_N
BEEPER
MIC
MIC
_N
STROBE_PWR
MS_ON
CCD_ON1
IN1IN2IN3IN4
SW_KEY_ADC1
PWR_KEY
SHUT1SHUT2PW_LED
JA C K
JA C K
D+D-
+3.1VDUSB_DET
DGNDA/V_DETVIDEO_OUTLINE_OUTBEEPER UGND
12
LC D
LC D
+3.1VD
DGND
MLCD_ON
+5VM
LCD_ENLCD_MCLK
LCD_VDLCD_HD
LCD_SCLKLCD_SDATA
LCD[0..7]
BL
1 3
2
31
42 5
6
LE NS
LE NS
LENS_PSSHUTTER_M1SHUTTER_M0
LENS_ENLENS_SCLKLENS_SDATA
+5VM
+3.1VD
ZOOM_PI
FOCUS_PIZOOM_PR
DGND
IN1IN2IN3IN4
12
T O P
T O P
PWR_KEY
SHUT1SHUT2
PW_LED+3.1VD
DGND
Pow
er4
Out1 GND_3 3
GND_22
MIC 1S P M0204HD5MIC 1S P M0204HD5
AUO LCD2.36INCHPANEL
SELF TIMER LED
POWER LED
FLASHCHARGER Q5
Q2
CAPACITOR100UF 300V
FLASH TUBE
STROBE & TOP BOARD
MAIN BOARD
LENS BLOCK
MEMORY STICK
PC
ZOOM SENSOR
ZOOM MOTOR
FOCUS SENSOR
FOCUS MOTOR
IRIS MOTOR
SHUTTER MOTOR
BUZZER
MODE DIAL
FUNCTION KEY
MS LED
12MHZ
33.75MHZ
IRIS(METER)
LENS
LCD_BACKLIGHT
MC4_4.72X3.76_173G2412-0039-00
Note : The adjustment is not required after replacing the LCD
1
2
3
4
5
6
7
9
Main Frame Block(See Page 4-2)
ns
ns
Q1
11
1712
18
13
14
15
8
16
1019
15
(Note)
4-1DSC-S730
4. REPAIR PARTS LIST
4-1. EXPLODED VIEWS4-1-1. OVERALL SECTION
Ref. No. Part No. Description
1 X-2188-411-12 X-2188-412-13 3-286-696-01 SHAFT, STRAP4 3-286-697-01 BLOCK, RL5 3-286-698-01 LCD
6 A-1444-049-A ST BLOCK ASSY7 3-286-700-01 SHAFT, BT LID8 3-286-701-01 LID, BT9 3-286-702-01 SPRING, BT LID10 3-286-703-01 LID, JACK
CABINET (FRONT) ASSYCABINET (REAR) ASSY
Ref. No. Part No. Description
11 3-287-023-11 SCREW M1.7 X 2.712 3-287-026-01 SCREW TP1.4 X 2.513 3-287-028-01 SCREW TP1.7 X 3.514 3-287-027-01 SCREW TP1.7 X 415 3-287-025-01 SCREW TP1.4 X 3
16 3-287-032-01 SCREW TP1.7 X 6.517 3-296-920-01 SCREW TP1.4 X 3.518 3-296-921-01 SCREW TP1.4 X 419 3-299-366-01 SCREW TP1.7 X 3.5Q1 4-107-819-01 TRANSISTOR FLASH STROBOSCOPE
• Refer to cover for mark .
ns: not supplied
The changed portions fromVer. 1.0 are shown in blue.
Ver. 1.1 2008.07
101
105
106
102
102
107
102103
104
Note 1 : In case of main board failure, contact your local Sony service Headquarter for the measures.
Note 2 : When separate lens block assy and main board for main frame replacement, assemble original lens block assy and main board back after repaire.
(Note 2)
Lens Block(See page 4-3)
F5
F3
R82(Note 3)
Q16(Note 3)
ns
(Note 1) ns
Note 3 : Refer to "Installation position of Q16 and R82" for the installation position of Q16 and R82.
4-2DSC-S730
4-1-2. MAIN FRAME BLOCK
4. REPAIR PARTS LIST
ns: not supplied
The changed portions fromVer. 1.0 are shown in blue.
Ver. 1.1 2008.07
Ref. No. Part No. Description
101 3-286-699-01 SUPPORT (JACK)102 3-287-024-01 SCREW TP1.4 X 3103 3-287-026-01 SCREW TP1.4 X 2.5104 3-287-028-01 SCREW TP1.7 X 3.5105 3-286-704-01 FRAME, MAIN
• Refer to cover for mark .
• Items marked “*” are not stocked since they are seldom required forroutine service. Some delay should be anticipated when ordering these items.
Ref. No. Part No. Description
106 X-2319-399-1 BASE, BT
107 1-820-333-11 MULTI CONNECTOR (REC) 8PF3 1-576-913-11 FUSE, MICRO (1608 TYPE) (1.6A/36V)F5 1-576-363-11 FUSE, MICRO (1005 TYPE) (1A/30V)
TRANSISTOR DTC144WM3T5GQ16 4-120-071-01
R82 1-218-957-11 RES-CHIP 2.2k 5% 1/16W
*
ns(CCD Assy)(Note)
ns(TP1.4X3)
Note : In case of the CCD assy failure, contact your local Sony service Headquarter for the measures.
151
152
153
4-1-3. LENS BLOCK
4. REPAIR PARTS LIST
4-3DSC-S730
Ref. No. Part No. Description
151 A-1444-054-A LENS BLOCK ASSY4-110-079-01 FILTER SET, LOW PASS4-110-077-01 SHEET, BLOCK ASSY PROTECTION153
152
Ver. 1.1 2008.07
ns : not supplied
4-4DSC-S730
Checking supplied accessories.
A/V cable 3-196-980-01
Wrist strap 2-050-981-01
USB cable 3-196-981-01
LR6 (size AA) Alkaline Battery (Note 1)
4-2. ACCESSORIES
4. REPAIR PARTS LIST
Note 1: This item is supplied with the unit as an accessory,but is not prepared as a service part.
CD-ROM(Cyber-shot application software/"Cyber-shot Handbook"/"Cyber-shot Step-up Guide")
* 3-281-191-51 (POLISH) * 3-281-191-61 (CZECH) * 3-281-191-71 (HUNGARIAN) * 3-281-191-81 (SLOVAK) * 3-281-191-91 (SWEDISH) * 3-281-192-11 (FINNISH) * 3-281-192-21 (NORWEGIAN) * 3-281-192-31 (DANISH) * 3-281-192-41 (THAI) * 3-281-192-51 (MALAYSIAN) * 3-281-192-61 (TURKISH) * 3-281-192-71 (GREEK) * 3-281-192-81 (UKRAINIAN)
Instruction Manual
*3-281-189-01
Cyber-shot Handbook(PDF)
The CD-ROM supplied contains all of language version ofthe Instruction Manual in pdf (Cyber-shot Handbook.pdf) for printing.
3-281-198-11 (ENGLISH) (CND, AEP, UK, E, AUS, HK, JE) 3-281-198-21 (FRENCH, ITALIAN) (CND, AEP) 3-281-198-31 (SPANISH, PORTUGUESE) (AEP, E, JE) 3-281-198-41 (GERMAN, DUTCH) (AEP) 3-281-198-51 (TRADITIONAL CHINESE, SIMPLIFIED CHINESE) (E, HK, JE) 3-281-198-61 (RUSSIAN, UKRAINIAN) (AEP) 3-281-198-71 (ARABIC, PERSIAN) (E) 3-281-198-81 (KOREAN) (KR, JE) 3-281-198-91 (POLISH, CZECH) (AEP) 3-281-199-11 (HUNGARIAN, SLOVAK) (AEP) 3-281-199-21 (SWEDISH, FINNISH) (AEP) 3-281-199-31 (NORWEGIAN, DANISH)(AEP) 3-281-199-41 (THAI, MALAYSIAN) (E) 3-281-199-51 (TURKISH, GREEK) (AEP) 3-281-199-61 (ENGLISH, SPANISH) (US) 3-281-199-71 (SIMPLIFIED CHINESE) (CH)
* 3-281-190-11 (ENGLISH) * 3-281-190-21 (FRENCH) * 3-281-190-31 (ITALIAN) * 3-281-190-41 (SPANISH) * 3-281-190-51 (PORTUGUESE) * 3-281-190-61 (GERMAN) * 3-281-190-71 (DUTCH) * 3-281-190-81 (TRADITIONAL CHINESE) * 3-281-190-91 (SIMPLIFIED CHINESE) * 3-281-191-11 (RUSSIAN) * 3-281-191-21 (ARABIC) * 3-281-191-31 (PERSIAN) * 3-281-191-41 (KOREAN)
The printed matter is not supplied. If required,please order it with the part number below.
NOTE:Items marked “*” are not stocked since they are seldom required for routine service. Some delay should be anticipated when ordering these items.AbbreviationAUS : Australian modelCH : Chinese modelCND : Canadian modelHK : Hong Kong modelJE : Tourist modelKR : Korea model
MAIN BOARD
【Installation position of Q16 and R82】
・Q16R82
R82 1-218-957-11 2.2K 5% 1/16W
Q16 4-120-071-01 DTC144WM3T5G
DSC-S730
Ver. 1.1 2008.07
DSC-S730
The changed portions fromVer. 1.0 are shown in blue.
Ver. 1.1 2008.07
Ref. No. : F5Part No. : 1-576-363-11Description : FUSE, MICRO (1005 TYPE) (1A/30V)
Ref. No. : F3Part No. : 1-576-913-11Description : FUSE, MICRO (1608 TYPE) (1.6A/36V)
MAIN BOARD
【Regarding Fuse】
・
F5
F3
F5
F3
DSC-S730
Revision History
Reverse
Ver.
1.0
Date
2007.11
Histor y
Official Release
Contents
—
S.M. Rev.issued
—
985223912.pdf
1.1 2008.07 Revised-1 • Addition of DISASSEMBLY for Lens Assy• Addition of HELP
• Revision of Regarding FuseS.M. Revised : Page 4, 2-2, HELP, 3-1, 4-1, 4-2, 4-3,Installation position of Q16 and R82,Regarding Fuse
• Change of BLOCK DIAGRAMS• Addition of REPAIR PARTS LIST• Addition of
Installation position of Q16 and R82
Yes