Date post: | 02-Jan-2016 |
Category: |
Documents |
Upload: | anonymous-jivcju |
View: | 249 times |
Download: | 5 times |
Sony CorporationHome Entertainment Business Group
SERVICE MANUAL
9-890-744-11
2010L 6900-1© 2010.12
Published by Design Engineering Dept.
BLU-RAY DISC / DVD PLAYER
Ver. 1.0 2010.12
BDP-BX38/S280/S380/S383RMT-B109A/B109P/B109C/B110A/B110P
SPECIFICATIONS
SystemLaser: Semiconductor laser
Inputs and outputs(Jack name:
Jack type/Output level/Load impedance)
HDMI OUT:HDMI 19-pin standard connector
COMPONENT VIDEO OUT (Y, P B, P R
Phono jack/Y: 1.0 Vp-p/PB , PR : 0.7 Vp-p/75 ohms
LINE OUT VIDEO:Phono jack/1.0 Vp-p/75 ohms
LAN (100):100BASE-TX Terminal
USB:USB jack Type A (For connecting a USB memory,
GeneralPower requirements:
120V AC, 60Hz (US, CND)220 – 240V AC, 50/60Hz (AEP,UK, AUS,RUS,CN)
Power consumption:18 W (BDP-S380/S383/BX38)
Dimensions (approx.):430 mm × 199 mm × 36mm(17 in. × 7 4/5 in. × 1 7/16 in.)(width/depth/height) incl. projecting parts
Mass (approx.): gk6..1
Operating temperature:5 ºC to 35 ºC(41 F to 95 F)
Operating humidity:25 % to 80 %
Supplied accessories
Specifications and design are subject to change without notice.
• Audio/video cable (phono plug ×3) (1)
• Remote commander (remote) (1)• Size AA (R6) batteries (2)
Photo: BDP-S280Remote : RMT-B109A
• HDMI cable (1) (Except AEP,UK,AUS,US,CND,PX,RUS)
(BDP-S280:US/S380:US/BX38:US)
ENERGY STAR and the ENERGY STAR mark are registered U.S. marks. ENERGY STAR is a registered mark owned by the U.S. government.
US ModelCanadian Model
Saudi Arabia Model
E Model
PX Model
Australian / New Zealand Model
Chinese ModelIndian Model
Russian Model
Taiwan Model Thailand Model
AEP ModelUK Model
Singapore Model
Argentina Model
Middle East Model
memory card reader,digital stil camera and digitalvideo camera)All model (REAR USB) BDP-BX38/S380/S383 (FRONT USB)
• (1) (BDP-S380 : TW only)LAN cable(Except AEP,UK,E,AR,SP,TH,CN,IN,TW)
16 W (BDP-S280)
110 – 240V AC, 50/60Hz (PX,E,AR,BR,SP,TH,EA,KS,IN)110V AC, 60Hz (TW)
) :
LINE OUT R-AUDIO-L::Phone jack/2 Vrms/10 kilohms
DIGITAL OUT (COAXIAL):Phono jack/0.5 Vp-p/75 ohms
BDP-S380
BDP-S280/S380/BX38
BDP-S280/S380/S383
º º
TM
UK Model BDP-S280/S380/S383
Brazilian Model BDP-S280
– 2 –
BDP-BX38/S280/S380/S383
SAFETY CHECK-OUT
LEAKAGE TESTThe AC leakage from any exposed metal part to earth ground and from all exposed metal parts to any exposed metal part having a return to chassis, must not exceed 0.5 mA (500 microamperes). Leakage current can be measured by any one of three methods.1. A commercial leakage tester, such as the Simpson 229 or RCA
WT-540A. Follow the manufacturers' instructions to use these instruments.
2. A battery-operated AC milliammeter. The Data Precision 245 digital multimeter is suitable for this job.
3. Measuring the voltage drop across a resistor by means of a VOM or battery-operated AC voltmeter. The “limit” indication is 0.75V, so analog meters must have an accurate low-voltage scale. The Simpson 250 and Sanwa SH-63Trd are examples of a passive VOM that is suitable. Nearly all battery operated digital multimeters that have a 2V AC range are suitable. (See Fig. A)
1. Check
the area of your repair for unsoldered or poorly-soldered connections. Check the entire board surface for solder splashes and bridges.
2. Check the interboard wiring to ensure that no wires are “pinched” or contact high-wattage resistors.
3. Look for unauthorized replacement parts, particularly transistors, that were installed during a previous repair. Point them out to the customer and recommend their replacement.
4. Look for parts which, though functioning, show obvious signs of deterioration. Point them out to the customer and recommend their replacement.
5. Check the line cord for cracks and abrasion. Recommend the replacement of any such line cord to the customer.
6. Check the B+ voltage to see it is at the values specified.7. Check the antenna terminals, metal trim, “metallized” knobs,
screws, and all other exposed metal parts for AC leakage. Check leakage as described below.
After correcting the original service problem, perform the following safety checks before releasing the set to the customer:
1.5kΩ0.15µF(0.75 V)
Parts on Set
Earth Ground
Fig. A. Using an AC voltmeter to check AC leakage.
Unleaded solderBoards requiring use of unleaded solder are printed with the lead-free mark (LF) indicating the solder contains no lead.(Caution: Some printed circuit boards may not come printed with the lead free mark due to their particular size.)
: LEAD FREE MARKUnleaded solder has the following characteristics.• Unleaded solder melts at a temperature about 40°C higher than
ordinary solder. Ordinary soldering irons can be used but the iron tip has to be
applied to the solder joint for a slightly longer time. Soldering irons using a temperature regulator should be set to
about 350°C. Caution: The printed pattern (copper foil) may peel away if the
heated tip is applied for too long, so be careful!• Strong viscosity Unleaded solder is more viscous (sticky, less prone to flow) than
ordinary solder so use caution not to let solder bridges occur such as on IC pins, etc.
• Usable with ordinary solder It is best to use only unleaded solder but unleaded solder may
also be added to ordinary solder.
CAUTION:The use of optical instrument with this product will increase eye hazard.
CAUTIONUse of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radia-tion exposure.
2
WARNINGTo reduce the risk of re or electric shock, do not expose this apparatus to rain or moisture.To avoid electrical shock, do not open the cabinet. Refer servicing to quali ed personnel only.
Batteries or batteries installed apparatus shall not be exposed to excessive heat such as sunshine,
re or the like.
CAUTIONThe use of optical instruments with this product will increase eye hazard. As the laser beam used in this Blu-ray Disc/DVD player is harmful to eyes, do not attempt to disassemble the cabinet.Refer servicing to quali ed personnel only.
This label is located on the laser protective housing inside the enclosure.
This appliance is classi ed as a CLASS 1 LASER product. The CLASS 1 LASER PRODUCT MARKING is located on the laser protective housing inside the enclosure. (Except US, Canadian, E)
Notice for customers in the United Kingdom and Republic of IrelandA molded plug complying with BS1363 is tted to this equipment for your safety and convenience.Should the fuse in the plug supplied need to be replaced, a 5 AMP fuse approved by ASTA or BSI to BS1362, (i.e., marked with
or mark) must be used.If the plug supplied with this equipment has a detachable fuse cover, be sure to attach the fuse cover after you change the fuse. Never use the plug without the fuse cover. If you should lose the fuse cover, please contact your nearest Sony service station.
Disposal of Old Electrical & Electronic Equipment (Applicable in the European Union and other European countries with separate collection systems)This symbol on the product or on its packaging indicates that this product shall not be treated as household waste. Instead it shall be handed over to the applicable collection point for the recycling of electrical and electronic equipment. By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product. The recycling of materials will help to conserve natural resources. For more detailed information about recycling of this product, please contact your local Civic O ce, your household waste disposal service or the shop where you purchased the product.
Disposal of wasbatteries (applithe European Unother Europeawith separate systems)This symbol on thethe packaging inbattery providedshall not be treawaste.By ensuring thesdisposed of correctlprevent potentiaconsequences foand human healotherwise be cauinappropriate wabattery. The recycmaterials will henatural resource
In case of productperformance or reasons require connection withbattery, this battereplaced by quaonly.To ensure that thtreated properlyproduct at end-oapplicable collecrecycling of elecelectronic equip
For all other battthe section on hbattery from theHand the batteryapplicable collecrecycling of was
For more detaileabout recycling battery, please coCi vic O ce, youwaste disposal swhere you purch
WARNING!!WHEN SERVICING, DO NOT APPROACH THE LASER EXIT WITH THE EYE TOO CLOSELY. IN CASE IT IS NECESSARY TO CONFIRM LASER BEAM EMISSION,
EROM FO ECNATSID A MORF EVRESBO OT ERUS EBTHAN 25 cm FROM THE SURFACE OF THE OBJEC-TIVE LENS ON THE OPTICAL PICK-UP BLOCK.
SAFETY-RELATED COMPONENT WARNING!!
COMPONENTS IDENTIFIED BY MARK 0 ENIL DETTOD RO WITH MARK 0 NI DNA SMARGAID CITAMEHCS EHT NO THE PARTS LIST ARE CRITICAL TO SAFE OPERATION. RE-
ESOHW STRAP YNOS HTIW STNENOPMOC ESEHT ECALP RO LAUNAM SIHT NI NWOHS SA RAEPPA SREBMUN TRAP
IN SUPPLEMENTS PUBLISHED BY SONY.
ATTENTION AU COMPOSANT AYANT RAPPORT À LA SÉCURITÉ!
LES COMPOSANTS IDENTIFIÉS PAR UNE MARQUE 0 ETSIL AL TE SEUQITAMÉHCS SEMMARGAID SEL RUS ED ÉTIRUCÉS AL RUOP SEUQITIRC TNOS SECÈIP SED STNASOPMOC SEC RECALPMER EN .TNEMENNOITCNOF TNOS SORÉMUN SEL TNOD YNOS SECÈIP SED RAP EUQ
DONNÉS DANS CE MANUEL OU DANS LES SUPPLÉ-MENTS PUBLIÉS PAR SONY.
For customers in European countries
This appliance is classied as a CLASS 1 LASER product. The CLASS 1 LASER PRODUCT MARKING is located on the rear exterior.
– 3 –
TABLE OF CONTENTS
1. SERVICE NOTE
1-1. Disc Removal Procedure If The Tray Cannot Be Ejected (Forced Ejection) ............................................. 1-11-2. Work when optical device are replaced ........................ 1-11-3. Test Disc ....................................................................... 1-2 1-3-1. Operation and Display ............................................. 1-2
1-4. Drive Repairing............................................................. 1-15 1-4-1. Preparation .............................................................. 1-15 1-4-2. Checking Flow ~ Drive (BU) section ~ .................... 1-15 1-4-3. BU Check Flow [zz] ~ .............................................. 1-16 1-4-4. BU (Optical Block) Repair Guide ............................. 1-16 1-4-5. BU Adjustment Flow [yy] ~ ...................................... 1-17 1-4-6. KEM-470AAA/C2RP Packing Spec. ....................... 1-17 1-4-7. KEM-470AAA/C2RP Packing .................................. 1-18 1-4-8. BU Data Decode Jig ................................................ 1-19 1-4-9. Loading For Service ......................................... 1-20 1-4-10. Laser Caution Label ................................................ 1-20
2. DISASSEMBLY
2-1. Disassembly Flow ........................................................ 2-12-2. Upper Case .................................................................. 2-12-3. Tray Cover Assy .......................................................... 2-22-4. Front Panel Assy, FL-203 and IF-170 Board .... ............... 2-22-5. Rear Panel Block ......................................................... 2-32-6. MB-138 Board ............................................................. 2-32-7. BD Drive ....................................................................... 2-42-8. Switching Regulator ..................................................... 2-5E
3. BLOCK DIAGRAMS
3-1. Overall Block Diagram.................................................. 3-13-2. DSP Block Diagram ...................................................... 3-23-3. AV OUT Block Diagram ................................................ 3-33-4. USB/ETHER, Block Diagram .................................. 3-43-5. Power Block Diagram .......................................... 3-5E
4. SCHEMATIC DIAGRAMS
4-1. This Note Is Common For Schematic Diagrams .......... 4-14-2. Frame Schematic Diagram........................................... 4-24-3. IF-170 Board (FRONT LEFT) Schematic Diagram ... 4-34-4. IF-170 Board (USB FRONT) Schematic Diagram ...... 4-4
4-6. MB-138 Board (DDR 3 A) Schematic Diagram (1/14)............................................ 4-64-7. MB-138 Board (DDR 3 B) Schematic Diagram (2/14)............................................ 4-7
4-14. MB-138 Board (AUDIO) Schematic Diagram (9/14)............................................ 4-144-15. MB-138 Board (VIDEO) Schematic Diagram (10/14).......................................... 4-154-16. MB-138 Board (GPIO/JTAG) Schematic Diagram (11/14) .......................................... 4-164-17. MB-138 Board (IF CON) Schematic Diagram (12/14).......................................... 4-174-18. MB-138 Board (FE_POWER/OP/GIO) Schematic Diagram (13/14).......................................... 4-184-19. MB-138 Board (FE_POWER/MOTOR DRIVE)
4-20. Waveforms ................................................................... 4-20E
5. PRINTED WIRING BOARDS
5-1. This Note Is Common For Printed Wiring Boards ........ 5-15-2. FL-203 Board (FRONT LEFT) Printed Wiring Board..... 5-25-3. IF-170 Board Printed Wiring Board ...................................................... 5-35-4. MB-138 Board(MAIN) Printed Wiring Board (Side A) ..................................... 5-45-5. MB-138 Board (MAIN) Printed Wiring Board (Side B) ...................................... 5-5E
6. IC PIN FUNCTION DESCRIPTION ................... 6-1
7. SERVICE MODE ..................................................... 7-1
8. ERROR LOG LIST ................................................. 8-1
9. TROUBLESHOOTING ............................................. 9-1
10. REPAIR PARTS LIST
10-1. Exploded Views ............................................................ 10-1 10-1-1. Case Section ........................................................... 10-1 10-1-2. ........................................... 10-2 10-1-3.
Main Chassis Section ............................................................. 10-3
10-1-4. BD Section
.......................................................... 10-4 Accessories 10-2. Electrical Parts List ....................................................... 10-5
BDP-BX38/S280/S380/S383
Schematic Diagram (14/14) ........................................ 4-19
4-11. MB-138 Board (USB) Schematic Diagram (6/14)......... 4-11
4-12. MB-138 Board (HDMI) Schematic Diagram (7/14)............................................ 4-124-13. MB-138 Board (ETHERNET) Schematic Diagram (8/14)............................................ 4-13
2-9. Circuit Boards Location ................................................ 2-5E
1-5. Rear Panel Assembly Caution................................... 1-23E
egaP eltiT noitceS egaP eltiT noitceS
1-3-2. Main functions ......................................................... 1-9
4-9. MB-138 Board (CLK/POWER) Schematic Diagram (4/14)............................................ 4-94-10. MB-138 Board (FLASH/HOST) Schematic Diagram (5/14)............................................ 4-10
4-8. MB-138 Board (POWER) Schematic Diagram (3/14)............................................ 4-8
4-5. FL-203 Board (FRONT RIGHT) Schematic Diagram ... 4-5
1-1
BDP-BX38/S280/S380/S383SECTION 1
SERVICE NOTE
1-1. DISC REMOVAL PROCEDURE IF THE TRAY CANNOT BE EJECTED (FORCED EJECTION)
1. Remove the upper case. (Refer to page 2-1)2. Insert a clip in the hole of a drive and open a tray.
Note:
1-2. Work when optical device are replaced
Note: Please do the following work when you replace the optical device.
1. Install it in PC after downloading two set of software from following URL. (Refer to “1-4-9. BU Data Decode Jig” on page 1-19)
STEP 1 Microsoft .NET Framework Version 2.0 Redistributable Package (x86) http://www.microsoft.com/downloads/details.aspx?displaylang=en&FamilyID=0856eacb-4362-4b0d-8edd-aab15c5e04f5
STEP 2 Microsoft .NET Framework 2.0 Service Pack 1 (x86) http://www.microsoft.com/downloads/details.aspx?displaylang=en&FamilyID=79bc3b77-e02c-4ad3-aacf-a7633f706ba5
2. Take a photograph of the bar code on the optical device. The valid bar code photo as shown in Fig.2
3. Drag-and-drop the bar code photograph to the icon of decode software (BDPRdec). * The decode software is a complete set of “BDPRdec”, “Tasman.Bars.dll”, and “SavePath”. * Because decode software cannot be attached, it separately distributes it.
4. Input the password when you start decode software.* Inquire of each service headquarters because the password cannot be disclosed.
5. Write the decode data to the set. (Refer to “1-4-4. BU (Optical Block) Repair Guide” on page 1-16 and “1-4-5. BU Adjustment Flow [yy]” on page 1-17)
tray
Fig.2
Fig.1
(Use clip diameter about 1.2 mm)
hole(12~32)mm
clip
1-2
BDP-BX38/S280/S380/S383
1-3. TEST DISC
Part No. Description LayerJ-6090-199-A BLX-104 Single Layer
J-6090-200-A BLX-204 Dual Layer
J-2501-307-A CD (HLX-A1)
J-2501-305-A HLX-513 Single Layer (NTSC)
J-2501-306-A HLX-514 Dual Layer (NTSC)
J-6090-077-A HLX-506 Single Layer (PAL)
J-6090-078-A HLX-507 Dual Layer (PAL)
1-3-1. Operation and DisplayCheck Items1) BLX-104 1. Select 23.976Hz/1080p 2. Play “4.Motion pictures” 3. Check whether player can play back or not 4. Check each outputs Video: Composite/component/HDMI Audio: Digital out (Coaxial/Optical)/Audio out/5.1Ch output* When 1080/24p monitor is nothing, 1080i (59.94Hz or 50Hz) can use instead of 1080/24p. However this is temporary correspondence.
2) BLX-204 1. Select 1080i (59.94Hz or 50Hz) 2. Play “4.Motion pictures” 3. Check whether player can play back or not (Check the picture and sound output)
3) CD (HLX-A1) Check whether player can play back or not (Check the sound output)
4) HLX-513/514 (NTSC), HLX-506/507 (PAL) 1. After displayed Main Menu, select “1.Video” 2. Play “1.Color Bar 100%” (Check the picture and sound output) 3. Return to Menu 4. Play “Demonstration 4:3” or “5.Demonstration 16:9” (Check the picture and sound output)
1-3
BDP-BX38/S280/S380/S383
1-3-1-1. BLX-104 Menu Function (1)Main Menu
X
X
X
X
X
X
X
X
X
X X X
X X X
X
1) When the disc is inserted, 1. Video Signal of 59.94Hz/1080i of the Main Menu is selectively displayed.
1-3-1-2. BLX-104 Menu Function (2)Main Menu
Sub_menu1 is displayedTo Main Menu after playback from T2_C1 to T19_C1To Main Menu after playback of T20_C1To Main Menu after playback of T21_C1
Sub_menu3 is displayedTo Main Menu after playback from T54_C1 to T60_C1To Main Menu after playback of T61_C1To Main Menu after playback of T62_C1
* When returning to Main Menu after playback from each button of 59.94Hz/1080i, 1. Video Signal of 59.94Hz/1080i is selectively dis-played.
* When returning to Main Menu after playback from each button of 50Hz/1080i, 1. Video Signal of 50Hz/1080i is selectively displayed.* 5. AV Sync does not operate.Note: Txx_ Cxx Chapter No. Title No.
1-4
BDP-BX38/S280/S380/S383
1-3-1-3. BLX-104 Menu Function (3)Main Menu
To Main Menu after playback from T23_C1 to T40_C1To Main Menu after playback of T41_C1To Main Menu after playback of T42_C1
Sub_menu2 is displayedTo Main Menu after playback from T44_C1 to T50_C1To Main Menu after playback of T51_C1To Main Menu after playback of T52_C1
Sub_menu4 is displayed
* When returning to Main Menu after playback from each button of 59.94Hz/720P, 1. Video Signal of 59.94Hz/720P is selectively dis-played.
* When returning to Main Menu after playback from each button of 23.976Hz/1080P, 1. Video Signal of 23.976Hz/1080P is selectively displayed.
* 5. AV Sync does not operate.
1-5
BDP-BX38/S280/S380/S383
1-3-1-4. BLX-104 Menu Function (4)Sub menu1
X
X
X
X
X
X
1) At the display of Sub menu1, 1. Color Bar 100% is selectively displayed.2) Selection of 1. Color Bar 100% t Return to Sub menu1 after seamless playback from T1_C1 to T1_C13. 1. Color Bar 100% is selec-
tively displayed on Sub menu1 screen.3) Selection of 2. Color Bar 75% t Return to Sub menu1 after seamless playback from T1_C2 to T1_C13. 1. Color Bar 100% is selectively
displayed on Sub menu1 screen.4) At the selection of 3 - 13, item 3 mentioned above is executed as the routine.5) At the display of Sub menu1, Main Menu is selected t Jump to Main Menu. At the display of Main Menu, 1. Video Signal of 59.94Hz/1080i
is selectively displayed.6) Selection of LPCM Audio t Playback from T2_C1 to T19_C1. SubPic that corresponds to Audio stream 1 is forcibly displayed. During the playback, when audio channel changes, the caption that corresponds to each audio stream is forcibly displayed. Return to
Sub menu1 after playback. 1. Color Bar 100% is selectively displayed on Sub menu1 screen.7) Selection of Dolby AC-3 Audio t Playback of T20_C1. SubPic that corresponds to Audio stream 1 is forcibly displayed. During the playback, when audio channel changes, the caption that corresponds to each audio stream is forcibly displayed. Return to
Sub menu1 after playback. 1. Color Bar 100% is selectively displayed on Sub menu1 screen.8) Selection of Motion Picture t Return to Sub menu1 after playback of T21_C1. 1. ColorBar 100% is selectively displayed on Sub
menu1 screen.9) At the selection of Main Menu, 1. VideoSignal of 1080/59.94i of Main Menu is selectively displayed.10) AV Sync does not operate.
1-6
BDP-BX38/S280/S380/S383
1-3-1-5. BLX-104 Menu Function (5)Sub menu2
X
X
X
X
X
X
1) At the display of Sub menu2, 1. Color Bar 100% is selectively displayed.2) Selection of 1. Color Bar 100% t Return to Sub menu2 after seamless playback from T43_C1 to T43_C13. 1. Color Bar 100% is
selectively displayed on Sub menu2 screen.3) Selection of 2. Color Bar 75% t Return to Sub menu2 after seamless playback from T43_C2 to T43_C13. 1. Color Bar 100% is se-
lectively displayed on Sub menu2 screen.4) At the selection of 3 - 13, item 3 mentioned above is executed as the routine.5) At the display of Sub menu2, Main Menu is selected t Jump to Main Menu. At the display of Main Menu, 1. Video Signal of
23.976Hz/1080P is selectively displayed.6) Selection of LPCM Audio t Playback from T44_C1 to T50_C1. SubPic that corresponds to Audio stream 1 is forcibly displayed. During the playback, when audio channel changes, the caption that corresponds to each audio stream is forcibly displayed. Return to
Sub menu2 after playback. 1. Color Bar 100% is selectively displayed on Sub menu2 screen.7) Selection of Dolby AC-3 Audio t Playback of T51_C1. SubPic that corresponds to Audio stream 1 is forcibly displayed. During the playback, when audio channel changes, the caption that corresponds to each audio stream is forcibly displayed. Return to
Sub menu2 after playback. 1. Color Bar 100% is selectively displayed on Sub menu2 screen.8) Selection of Motion Picture t Return to Sub menu2 after playback of T52_C1. 1. Color Bar 100% is selectively displayed on Sub
menu2 screen.9) At the selection of Main Menu, 1. Video Signal of 1080/23.976P of Main Menu is selectively displayed.10) AV Sync does not operate.
1-7
BDP-BX38/S280/S380/S383
1-3-1-6. BLX-104 Menu Function (6)Sub menu3
X
X
X
X
X
X
1) At the display of Sub menu3, 1. Color Bar 100% is selectively displayed.2) Selection of 1. Color Bar 100% t Return to Sub menu3 after seamless playback from T53_C1 to T53_C13. 1. Color Bar 100% is
selectively displayed on Sub menu3 screen.3) Selection of 2. Color Bar 75% t Return to Sub menu3 after seamless playback from T53_C2 to T53_C13. 1. Color Bar 100% is se-
lectively displayed on Sub menu3 screen.4) At the selection of 3 - 13, item 3 mentioned above is executed as the routine.5) At the display of Sub menu3, Main Menu is selected t Jump to Main Menu. At the display of Main Menu, 1. Video Signal of 50Hz/1080i
is selectively displayed.6) Selection of LPCM Audio t Playback from T54_C1 to T60_C1. SubPic that corresponds to Audio stream 1 is forcibly displayed. During the playback, when audio channel changes, the caption that corresponds to each audio stream is forcibly displayed. Return to
Sub menu3 after playback. 1. Color Bar 100% is selectively displayed on Sub menu3 screen.7) Selection of Dolby AC-3 Audio t Playback of T61_C1. SubPic that corresponds to Audio stream 1 is forcibly displayed. During the playback, when audio channel changes, the caption that corresponds to each audio stream is forcibly displayed. Return to
Sub menu3 after playback. 1. Color Bar 100% is selectively displayed on Sub menu3 screen.8) Selection of Motion Picture t Return to Sub menu3 after playback of T62_C1. 1. Color Bar 100% is selectively displayed on Sub
menu3 screen.9) At the selection of Main Menu, 1. Video Signal of 1080/50i of Main Menu is selectively displayed.10) AV Sync does not operate.
1-8
BDP-BX38/S280/S380/S383
1-3-1-7. BLX-104 Menu Function (7)Sub menu4
X
X
X
X
X
X
1) At the display of Sub menu4, 1. Color Bar 100% is selectively displayed.2) Selection of 1. Color Bar 100% t Return to Sub menu4 after seamless playback from T22_C1 to T22_C13. 1. Color Bar 100% is
selectively displayed on Sub menu4 screen.3) Selection of 2. Color Bar 75% t Return to Sub menu4 after seamless playback from T22_C2 to T22_C13. 1. Color Bar 100% is se-
lectively displayed on Sub menu4 screen.4) At the selection of 3 - 13, item 3 mentioned above is executed as the routine.5) At the display of Sub menu4, Main Menu is selected t Jump to Main Menu. At the display of Main Menu, 1. Video Signal of 59.94Hz/720P
is selectively displayed.6) Selection of LPCM Audio t Playback from T44_C1 to T50_C1. SubPic that corresponds to Audio stream 1 is forcibly displayed. During the playback, when audio channel changes, the caption that corresponds to each audio stream is forcibly displayed. Return to
Sub menu4 after playback. 1. Color Bar 100% is selectively displayed on Sub menu4 screen.7) Selection of Dolby AC-3 Audio t Playback of T51_C1. SubPic that corresponds to Audio stream 1 is forcibly displayed. During the playback, when audio channel changes, the caption that corresponds to each audio stream is forcibly displayed. Return to
Sub menu4 after playback. 1. Color Bar 100% is selectively displayed on Sub menu4 screen.8) Selection of Motion Picture t Return to Sub menu4 after playback of T52_C1. 1. Color Bar 100% is selectively displayed on Sub
menu4 screen.9) At the selection of Main Menu, 1. Video Signal of 720/59.94P of Main Menu is selectively displayed.10) AV Sync does not operate.
1-9
BDP-BX38/S280/S380/S383
1-3-2-1. BLX-204 Menu Function (1)Main Menu
X
X
X
X
X
X
XX
X
X X X X
X X
X
X
X
1) When the disc is inserted, 1. Video Signal of 59.94Hz/1080i of the Main Menu is selectively displayed.
1-3-2-2. BLX-204 Menu Function (2)Main Menu
Sub_menu1 is displayedTo Main Menu after playback from T2_C1 to T19_C1To Main Menu after playback of T20_C1To Main Menu after playback of T21t T63t T64t T65t T66
Sub_menu3 is displayedTo Main Menu after playback of T54_C1-T60_C1t T83_C1-T94_C1To Main Menu after playback of T61_C1To Main Menu after playback of T62t T82
To Main Menu after playback of T67_C1
To Main Menu after playback of T83_C1
* When returning to Main Menu after playback from each button of 59.94Hz/1080i, 1. Video Signal of 59.94Hz/1080i is selectively dis-played.
* When returning to Main Menu after playback from each button of 50Hz/1080i, 1. Video Signal of 50Hz/1080i is selectively displayed.Note: Txx_ Cxx Chapter No. Title No.
1-3-2 Menu Function
1-10
BDP-BX38/S280/S380/S383
1-3-2-3. BLX-204 Menu Function (3)Main Menu
Sub_menu4 is displayedTo Main Menu after playback from T23_C1 to T40_C1To Main Menu after playback of T41_C1To Main Menu after playback of T42_C1
Sub_menu2 is displayedTo Main Menu after playback of T44_C1-T50_C1t T71_C1-T81_C1To Main Menu after playback of T51_C1To Main Menu after playback of T52_C1t T69
To Main Menu after playback of T68_C1
To Main Menu after playback of T70_C1
* When returning to Main Menu after playback from each button of 59.94Hz/720P, 1. Video Signal of 59.94Hz/720P is selectively dis-played.
* When returning to Main Menu after playback from each button of 23.976Hz/1080P, 1. Video Signal of 23.976Hz/1080P is selectively displayed.
1-11
BDP-BX38/S280/S380/S383
1-3-2-4. BLX-204 Menu Function (4)Sub menu 1
X
X
X
X
X
X
1) At the display of Sub menu1, 1. Color Bar 100% is selectively displayed.2) Selection of 1. Color Bar 100% t Return to Sub menu1 after seamless playback from T1_C1 to T1_C13. 1. Color Bar 100% is selec-
tively displayed on Sub menu1 screen.3) Selection of 2. Color Bar 75% t Return to Sub menu1 after seamless playback from T1_C2 to T1_C13. 1. Color Bar 100% is selectively
displayed on Sub menu1 screen.4) At the selection of 3 - 13, item 3 mentioned above is executed as the routine.5) At the display of Sub menu1, Main Menu is selected t Jump to Main Menu. At the display of Main Menu, 1. Video Signal of
59.94Hz/1080i is selectively displayed.6) Selection of LPCM Audio t Playback from T2_C1 to T19_C1. SubPic that corresponds to Audio stream 1 is forcibly displayed. During the playback, when audio channel changes, the caption that corresponds to each audio stream is forcibly displayed. Return to
Sub menu1 after playback. 1. Color Bar 100% is selectively displayed on Sub menu1 screen.7) Selection of Dolby AC-3 Audio t Playback of T20_C1. SubPic that corresponds to Audio stream 1 is forcibly displayed. During the playback, when audio channel changes, the caption that corresponds to each audio stream is forcibly displayed. Return to
Sub menu1 after playback. 1. Color Bar 100% is selectively displayed on Sub menu1 screen.8) Selection of Motion Picture t Return to Sub menu1 after playback of T21_C1. 1. Color Bar 100% is selectively displayed on Sub
menu1 screen.9) Selection of AV Sync t Return to Sub menu1 after playback of T67_C1. 1. Color Bar 100% is selectively displayed on Sub menu1
screen.10) At the selection of Main Menu, 1. Video Signal of 1080/59.94i of Main Menu is selectively displayed.
1-12
BDP-BX38/S280/S380/S3838
1-3-2-5. BLX-204 Menu Function (5)Sub menu 2
X
X
X
X
X
X
1) At the display of Sub menu2, 1. Color Bar 100% is selectively displayed.2) Selection of 1. Color Bar 100% t Return to Sub menu2 after seamless playback from T43_C1 to T43_C13. 1. Color Bar 100% is
selectively displayed on Sub menu2 screen.3) Selection of 2. Color Bar 75% t Return to Sub menu2 after seamless playback from T43_C2 to T43_C13. 1. Color Bar 100% is se-
lectively displayed on Sub menu2 screen.4) At the selection of 3 - 13, item 3 mentioned above is executed as the routine.5) At the display of Sub menu2, Main Menu is selected t Jump to Main Menu. At the display of Main Menu, 1. Video Signal of
23.976Hz/1080P is selectively displayed.6) Selection of LPCM Audio t Playback from T44_C1 to T50_C1 and from T71_C1 to T81_C1. SubPic that corresponds to Audio stream
1 is forcibly displayed. During the playback, when audio channel changes, the caption that corresponds to each audio stream is forcibly displayed. Return to
Sub menu2 after playback. 1. Color Bar 100% is selectively displayed on Sub menu2 screen.7) Selection of Dolby AC-3 Audio t Playback of T51_C1. SubPic that corresponds to Audio stream 1 is forcibly displayed. During the playback, when audio channel changes, the caption that corresponds to each audio stream is forcibly displayed. Return to
Sub menu2 after playback. 1. Color Bar 100% is selectively displayed on Sub menu2 screen.8) Selection of Motion Picture t Return to Sub menu2 after playback of T52_C1 and T69. 1. Color Bar 100% is selectively displayed on
Sub menu2 screen.9) Selection of AV Sync t Return to Sub menu2 after playback of T70_C1. 1. Color Bar 100% is selectively displayed on Sub menu2
screen.10) At the selection of Main Menu, 1. Video Signal of 1080/23.976P of Main Menu is selectively displayed.
1-13
BDP-BX38/S280/S380/S383
1-3-2-6. BLX-204 Menu Function (6)Sub menu 3
X
X
X
X
X
X
1) At the display of Sub menu3, 1. Color Bar 100% is selectively displayed.2) Selection of 1. Color Bar 100% t Return to Sub menu3 after seamless playback from T53_C1 to T53_C13. 1. Color Bar 100% is
selectively displayed on Sub menu3 screen.3) Selection of 2. Color Bar 75% t Return to Sub menu3 after seamless playback from T53_C2 to T53_C13. 1. Color Bar 100% is se-
lectively displayed on Sub menu3 screen.4) At the selection of 3 - 13, item 3 mentioned above is executed as the routine.5) At the display of Sub menu3, Main Menu is selected t Jump to Main Menu. At the display of Main Menu, 1. Video Signal of 50Hz/1080i
is selectively displayed.6) Selection of LPCM Audio t Playback from T54_C1 to T60_C1 and from T84_C1 to T94_C1. SubPic that corresponds to Audio stream
1 is forcibly displayed. During the playback, when audio channel changes, the caption that corresponds to each audio stream is forcibly displayed. Return to
Sub menu3 after playback. 1. Color Bar 100% is selectively displayed on Sub menu3 screen.7) Selection of Dolby AC-3 Audio t Playback of T61_C1. SubPic that corresponds to Audio stream 1 is forcibly displayed. During the playback, when audio channel changes, the caption that corresponds to each audio stream is forcibly displayed. Return to
Sub menu3 after playback. 1. Color Bar 100% is selectively displayed on Sub menu3 screen.8) Selection of Motion Picture t Return to Sub menu3 after playback of T62_C1 and T82. 1. Color Bar 100% is selectively displayed on
Sub menu3 screen.9) Selection of AV Sync t Return to Sub menu3 after playback of T83_C1. 1. Color Bar 100% is selectively displayed on Sub menu3
screen.10) At the selection of Main Menu, 1. Video Signal of 1080/50i of Main Menu is selectively displayed.
1-14
BDP-BX38/S280/S380/S383
1-3-2-7. BLX-204 Menu Function (7)Sub menu 4
X
X
X
X
X
X
1) At the display of Sub menu4, 1. Color Bar 100% is selectively displayed.2) Selection of 1. Color Bar 100% t Return to Sub menu4 after seamless playback from T22_C1 to T22_C13. 1. Color Bar 100% is
selectively displayed on Sub menu4 screen.3) Selection of 2. Color Bar 75% t Return to Sub menu4 after seamless playback from T22_C2 to T22_C13. 1. Color Bar 100% is se-
lectively displayed on Sub menu4 screen.4) At the selection of 3 - 13, item 3 mentioned above is executed as the routine.5) At the display of Sub menu4, Main Menu is selected t Jump to Main Menu. At the display of Main Menu, 1. Video Signal of 59.94Hz/720P
is selectively displayed.6) Selection of LPCM Audio t Playback from T44_C1 to T50_C1. SubPic that corresponds to Audio stream 1 is forcibly displayed. During the playback, when audio channel changes, the caption that corresponds to each audio stream is forcibly displayed. Return to
Sub menu4 after playback. 1. Color Bar 100% is selectively displayed on Sub menu4 screen.7) Selection of Dolby AC-3 Audio t Playback of T51_C1. SubPic that corresponds to Audio stream 1 is forcibly displayed. During the playback, when audio channel changes, the caption that corresponds to each audio stream is forcibly displayed. Return to
Sub menu4 after playback. 1. Color Bar 100% is selectively displayed on Sub menu4 screen.8) Selection of Motion Picture t Return to Sub menu4 after playback of T52_C1. 1. Color Bar 100% is selectively displayed on Sub
menu4 screen.9) Selection of AV Sync t Return to Sub menu4 after playback of T68_C1. 1. Color Bar 100% is selectively displayed on Sub menu4
screen.10) At the selection of Main Menu, 1. Video Signal of 720/59.94P of Main Menu is selectively displayed.
1-15
BDP-BX38/S280/S380/S383
1-4. DRIVE REPAIRING1-4-1.
Preparation
1-4-2. Checking Flow ~ Drive (BU) section ~
• ESD Measures It is necessary to check the working space ESD condition before starting the Drive Part (BU) repairs
The ESD-resistance of BD Laser is weaker than DVD/CD LaserTo prevent ESD destruction, please make sure the working space and human ESD.
Drive flowchart
BDP-S380 can play the BD-disc
BLX-104
BDP-S380 can play the DVD/CD-disc
Check Drive Power SupplyCN301 Pin 3: 12V IC309 Pin 1: 5V
Check PS301, PS302Replace PS when open
Check / replace the FFC cable, then check BDP-S380 operates normally
OP FFC cable (1-838-615-11)
Check the Optical Block Unit (BU) by service mode. (Flowchart zz)
BU IOP is OK?Replace the Optical Block Unit (BU)
Optical Block Unit (BU) replace (Flowchart yy)OK
DVD: HLX-513CD: HLX-A1
NO
YES
NO
YES
YES
NO NO
NO
SPD FFC cable (1-838-617-11)
• How to open FFC Holder. Refer below picture.
1
2
1
2
1
2
1-16
BDP-BX38/S280/S380/S383
1-4-3. BU Check Flow [zz] ~
Before BU Replacement ~
1-4-4. BU (Optical Block) Repair Guide
BDP 6G (BDP-S380) series component structure is as same as conventional DVD Players.However BD player requires precise read out functions and also secure contents Protection system.Since above requirement, it is necessary to set/adjust BU data to EEPROM.
The following cases need Adjustments;(1)Replace BU (MB is original)(2)Replace MB (BU is original)(3)Replace both BU and MB
•JIG RequirementDigital camera (recommend with macro mode)Barcode decoder (BDPRdec_ver2.0) installed in JIG PC’sUSB memory ESD work bench
•Procedure (all cases) Refer the diagram
Remarks: The servo adjustment procedure will be carried out during OP data Writing.There is no manual adjustment procedure. LD ON TIME history doesn’t carry over. Do not touch any optical block parts, Turn Table and during replacing. BD Laser diode is very sensitive!
Optical Block Unit (BU) IOP check flow (zz) ~ [Before BU Replacement]
Enter Service ModePress <OPEN/CLOSE>., <PLAY>,<STOP>
and plug in AC Power
Inside *Service Mode MenuSelect [8] Drive
Inside *DriveSelect [7] OP Check Menu
Inside *OP Check MenuSelect [2] dIOP then press 'ENTER'
Specification dIOPBD: 3mA
DVD, CD: 3mA
IOP out of specification need BU replacement
Optical Block Unit (BU) replace (Flowchart yy)AC Power OFF
NO
YES
+-+-
1-17
BDP-BX38/S280/S380/S383
1-4-5. BU Adjustment Flow [yy] ~
1-4-6. KEM-470AAA/C2RP Packing Spec.KEM-430AAA/C2RP Packing Spec.
Optical Block Unit (BU) OP Data Write Flow (yy) ~ [After BU/MB Replacement]
Remove the defective BU from Loading Assy and also remove BU insulator (4pcs)
Unpack new BU and take OP Data Barcode photo by camera
Assemble BU with Insulators to Loading Assy (tighten screw with 2kgf)
Decode the OP Data Barcode phot using BDPRdec.exe and save the test data to
USB memory(File Name: BuData.txt)
Enter Service Mode and insert USB memory to USB connector
Select [8] Drive --> Select [1] Drive OP data Write
Press ENTER
After Finishing ReWrite OP data--> Turn AC Power OFF
And confirm dIOP by select [7] OP Check Menu to verify IOP in specification
IOP in specification --> Turn AC Power OFF
Turn Power ON and check playback performance using BD, DVD and CD
BLX-104
DVD: HLX-513CD: HLX-A1
The following cases need OP Data Write:(1) Replace BU (MB is original)(2) Replace MB (BU is original)(3) Replace both BU and MB
JIG requirementDigital camera (with macro mode)Barcode decoder (BDPRdec.exe)installed in jigPC's (jig purpose)USB memoryESD free work bench
1-18
BDP-BX38/S280/S380/S383
1-4-7. KEM-470AAA/C2RP Packing
1) Store it in Cushion Carton
2) Store it in Individual Carton
Individual Carton (4-272-629-0)
Antistatic Bag
InstructionManual
Cushion Carton
Antistatic Bag
Lid foam tray
2) Store the Cushion carton in the individual carton
C surface cut facing front
3) Store it in Master Carton
4) Master carton is sealedwith the PP tape.
Individual Carton (E430-BU-RP)
Stick it toH.
PPTape
Store 10 individual cartons 1 step X 2 steps= 20 individual cartons in the master carton.Master Carton (E430-BU-RP)
Shipment Label(Care Mark 3)
1-19
BDP-BX38/S280/S380/S383
1-4-8. BU Data Decode JigBU Data Decode Jig
・JIG Name: BDPRdec. exe
・Version : 2.0.0.0
・Software Contents:BDPRdec.exe ; SoftwareSavePath.ini ; decoded file destination setting file (initial destination is C:¥BuData.txt)Tasman.Bars.dll ; decode dllUninst.exe ; unistall BDPRd ec.exe from PC
・Installations
STEP 1Microsoft .NET Framework Version 2.0 Redistributable Package (x86)http://www.microsoft.com/downloads/details.aspx?displaylang=en&FamilyID=0856eacb-4362-4b0d-
8edd-aab15c5e04f5
STEP 2Microsoft .NET Framework 2.0 Service Pack 1 (x86)http://www.microsoft.com/downloads/details.aspx?displaylang=en&FamilyID=79bc3b77-e02c-4ad3-
aacf-a7633f706ba5
*Hou to use Case1 Drag-and-drop 2Dcode photo onto BDPRdec.exe
Case2 Drag-and-drop BU data file onto BDPRdec.exe Data file name be changed to specify format and end of 7 character are defined Player : ****BDP.txt Recoder: ****BRD.txt #You can also enter the file path at the prompt.
*Remarks Do not change the decoded file name “BuData.txt”.
Release : 2010.11.26・
1.Unzip files to any PC Folder 2.Check the attached 2D code photo(OK_sample.JPG) drag-and-drop onto BDPRdec.exe, the Password will be required at first time only, no need P/W from second time. 3.If there is the error message (.NET frame work requirements) please apply Microsoft .NET Framework 2.0 (or 2.0 SP1) from Microsoft download site.
1-20
BDP-BX38/S280/S380/S383
1-4-10. Laser Caution LabelLaser Caution Label
The Loading Ass’y service parts does not have Laser Caution Label.So that please reuse the original Laser Caution label and paste it on top of new Loading Ass’y.
Limit SampleFollowing peel off condition are acceptable
1-4-9. Loading For Service
Loading For Service BDP 6G Loading Ass’y service parts consists from 3 parts.①Holder, Clamper Assy②Loading Assy③Holder FFC
Currently these parts are producing 2 vendors. But the THERE IS NO COMPATIBILITY.So, please DO NOT MIX the ① and ② of Loading for service and original Loading.
“Loading for service” A-1750-926-A
②Loading AssyLaser Caution Label
Holder, Clamper Assy①
③ Holder, FFC 4-167-321-01
(FFC Holder can be used both service parts and original
parts)
1-838-615-11FFC
1-838-619-11FFC
1-838-617-11FFC
1-21
BDP-BX38/S280/S380/S383
In case of BU assy replacement:
1. OP related data for new assy is controlled by BU factory 2. All of data is recorded into a barcode label3. The label is put on the assy4. Service parts will be followed5. In service, the data should be read out from problem assy6. The read data should be saved to new assy
Fact finding:
1. The label is “DATA MATRIX” format2. The number of data is 91 words3. The method of reading and saving is required when BU and
main board are replaced.
New service method
1. All of BU data on the barcode label is shot by digital camera inorder to make a JPEG file of BU data.
2. Application software in the PC makes digital data from JPEG file.
3. The converted data is stored to USB memory.
4. The USB memory is connected to BDP 6G unit.
5. In service mode, there is a command to save the data from USB memory to board memory.
1-22
BDP-BX38/S280/S380/S383
Shoot the barcodeFormat is JPEG
Application SoftwareData convert fromJPEG TEXT
Save the TEXT data
USB device is connected to symbol on the rear unit, and the TEXT data as new data is loaded to unit by service mode.
The application software will be a service jig .service jig, and the recording media will be CD-R.
Description: BDPRdec.exe
When instruction to PC, password is required.
The password will be supplied to only service HQ, and service center name, q’ty and all of software registered information should be maintained by service HQ, and Video will ask to report the registration information.
1-23E
BDP-BX38/S280/S380/S383
1-5. REAR PANEL ASSEMBLY CAUTION
Whenever you need to assemble the rear panel, please make sure that the Ethernet connector (CN801) Top Contact Springs are in good condition with height ≥2.0mm ± 0.5mm (refer to Fig 1)
If the Top Contact Springs are in at condition (Fig2), please lift them up to good condition before assembling the rear panel.
Spec.
Fig.1
Good Contact
Fig.2
When assembling the rear panel, please ensure good contact between the Top Contact Springs to the rear panel.
2-1
BDP-BX38/S280/S380/S383SECTION 2
DISASSEMBLY• This set can be disassembled in the order shown below.
Note: Follow the disassembly procedure in the numerical order given.
2-2. UPPER CASE
tapping screw(tightening torque = 5 to 6 kgf•cm)
1 Tapping screw(tightening torque =5 to 6 kgf•cm)
2 Three tapping screws
(tightening torque = 5 to6 kgf•cm)3
2-1. DISASSEMBLY FLOW
2-2. UPPER CASE (Page 2-1)
2-3. TRAY COVER ASSY (Page 2-2)
2-8. SWITCHING REGULATOR
(Page 2-3)2-7.
FRONT PANEL ASSY
(Page 2-4)2-5. REAR PANEL (Page 2-3)
2-6.
MB-138 BOARD (Page 2-5)
2-4.
BD DRIVE
(Page 2-2)
SET
Upper case
FL-203 & IF-170 boards
1
2-2
8
4
2
One screws(tightening torque = 6 to 7 kgf•cm)
Front Panel
3Harness (FLM-001)CN331
FL-203 Board
2-4. FRONT PANEL ASSY, FL-203 AND IF-170 BOARD
BDP-BX38/S280/S380/S383
2-3. TRAY COVER ASSY
tray
3 Tray cover assy
2
5
Eight hook1
7 Two screws +BV3 (3-CR)(tightening torque = 6 to 7 kgf•cm)
1 Insert a clip in the hole of a drive to open a tray.
IF-170 Board9
Light guidecover6
+BV3 (3-CR)
One screws(tightening torque = 6 to 7 kgf•cm)
+BV3 (3-CR)
Except BDP-S280
2-5. REAR PANEL BLOCK
Three ‘black’ screws +BV3(3-CR)
Rear panel block4
Two screws +P 3X3
(tightening torque = 6 to 7 kgf•cm)2
(tightening torque = 4 to 5 kgf•cm)3
2-3
2-6. MB-138 BOARD
Four screws +BV3(3-CR)(tightening torque = 6 to 7 kgf•cm)
MB-138 board(CN2470)
1 harness (PM-163)(CN301)
6
flexible flat(CN2460)
5
flexible flat4
(CN1204)
3 harness (FLM-001)(CN1203)
flexible flat
8
7
PS Insulator top1
BDP-BX38/S280/S380/S383
2 Flexible flat cable (FIM-031)
cable (LDG-002)
cable (SPD-001)
cable (OPT-001)(CN1301)
2-4
2-7. BD DRIVE
1 four screws +BV3(3-CR)(tightening torque = 6 to 7 kgf•cm)
5 BD drive
4 Loading flexible flat cable (LDG-002)(CN2470)
3 Splindle flexible flat cable (SPD-001)(CN2460)
2 Optical flexible flat cable (OPT-001)(CN1301)
BDP-BX38/S280/S380/S383
2-5E
2-8. SWITCHING REGULATOR
2 two screws +BV3(3-CR)(tightening torque = 6 to 7kgf•cm)
3switching regulator
2 PS Insulator top
2-9. CIRCUIT BOARDS LOCATION
IF-170 board
MB-138 boardFL-203 board
Switching Regulator
BDP-BX38/S280/S380/S383
T701
FL-203 BOARD
Y
PB
PR
L
R
CN801LAN(100)
IC301
(AC IN)
A
3-1
BDP-BX38/S280/S380/S383
SECTION 3BLOCK DIAGRAMS
3-1. OVERALL BLOCK DIAGRAM
PS301PS302
The components identifi ed by mark or dotted line with mark
are critical for safety.Replace only with part number specifi ed.
IC1003VIDEO AMP
IC907AUDIO LINEDRIVER
FRONT
REAR
HDMI
USB
USB
ETHERNET
VIDEO
AUDIO(ANALOG OUTPUT)
(DIGITAL OUTPUT)AUDIO
MB-138 BOARD
BDP-S280
CN701HDMI OUT
COAXIAL
AUDIO
REGULATOR
IC302IC303IC304IC305IC307IC308IC309IC310
IC601IC704IC703IC803IC804
VIDEO
COMPONENTVIDEO OUT
LINE OUT
DIGITAL OUTPCM/DTS/DOLBY
DIGITALSATA I/F, MEMORY CONTROL,A/V OUT, HDMI, ETHERNET I/F,
USB I/F
MAIN SYSTEM CONTROL, DSP
CXD9997G-AB
IC101
CN604
J901
B-BUS A-BUS
IC206IC106IC107
IC5012G NAND
FLASH
X40127MHZ
IC1204P FAIL
IC1203SUB SYSTEM
CONTROL
CN201
IC703REMOTECONTROLRECEIVER
IC702VFD DRIVER
Blu-rayDVDDRIVE
BD DRIVE
IF-170 BOARD
ND701FLUORESCENT
VACCUMDISPLAY
Q706,Q707CONVERTER
DC/DC
D709(WHITE)
S331POWER
POWER-1UNSW6V
SWITCHINGREGULATOR
EXCEPT:
CORE_1.1VDCDC6VSW5VDCDC-4V3.3VA
1.2VADDR3.1-5VFE_SW12VDAC3.3VUNSW3.3V
PS1201 DC DC 6V
IC1401
IC2401
SADRIVE
MOTOR DRIVE
USB
S701STOPS702
OPEN/CLOSES703PLAY
1Gb DDR3
IC306
BDP-S280 EXCEPT:
UNSW12V
VOLTAGE DIVIDER
IC603
3-2
AA11
IC106
1Gb DDR2SDRAM
X40127MHZ
IC101
MAIN SYSTEM CONTROL,DSP,SATA I/F,MEMORY CONTROL
A/V OUT,HDMI,ETHERNET I/FUSB I/F,
AB11
RRAS
IC107
1Gb DDR2SDRAM
DODQ0-DODQ15
DOA0-DOA12
RCASRWE
RODTRCLK0RCLKBRCLKE
RCS
RBA0RBA1
RBA2Y11
AA14
AD22
AE12
AE22
DODQ16-DODQ31
L3
J3
/CAS/WEODTCK/CKCKE/CS
/RAS
BA0
K3
K9
J7
K1
K7
L2
BA0
MB-138 BOARD
/CAS/WEODTCK/CKCKE/CS
/RAS
RCLK1RCLK1
AD10
AE10
IC106
1Gb DDR2SDRAM
RRAS_B
DIDQ0-DIDQ15
DIA0-DIA12
RCAS_BRWE_B
RODT_BRCLK0_B
RCLK0_BRCKE_B
RCS_B
RBA0_BRBA1_BRBA2_B
AH40
AC41
AL43
AG41
AL41
AD42
/CAS/WEODTCK/CKCKE/CS
/RAS
BA0
AC43
AJ41
A12
RFIPJ4BD_RF+
23
M OTOR DRIVEIC2401
RFINJ 3BD_RF-22
RFIP2J1DVD_RF +26
RFIN2J2DVD_RF-
32 INAE1A
25
INBE2B
28 INCF1C
20 INDF2D
17
INEH3E
34
INFH4F
8
INGG2G
7
INHG1H
6
FCS_P2740FCS_N2841TRK_P2942TRK_N30
FD1
43TLT_P24
FR1
44TLT_N25
FD2
45 FR2
TDTR
LOAD_N33LOAD -1
LOAD_ P32LOAD+2
FETR AYIN_TRAY-OUT
3FETR AYOUT_
TRAY-IN
5
U42U
4V44
V
W46W2
SLED2_P55
B+
8SLED2_N56
B-
9SLED1_P52
A
6SLED1_N53
A-
7
FE CFREQ P2SDIO
39
FE CMODP1
THERMO
9FE FMO416
38FE FMO337FE GAINSW2
N1
36
VFCS 21 FOOK2
VTRK 20 TRO K1
TLO L4VTLT 22
M ONITOR 12 FE LIM ITQ4
VSLED2 17 FE FMOL3
VSLED1 16 FE FMO2U4
VSPIN 18 FEDM0
VLOAD 19
FEOSCENR3
30
313319
SCLKLDD_SEN
SA_B+SA_B-SA_A+SA_A-
D3
M4
N3
171819
8
7
STP1+STP1-STP2+STP2-
STP1_IN
STP2_IN
STEP_ENA STEP_ENA
SA_BSA_AIC1401
SA_DRIVE
FE TR AYPWM
SPDL
B12
W1
W2
M3
IC501
16
18
8
CPU_NFD0 - CPU_NFD7
19
17
7
9
3-2. DSP BLOCK DIAGRAM
C22
B22
D21
C21
A23
B23
CPU_NFCENCPU_NFCLECPU_NFALECPU_NFWEN
CPU_NFRENCPU_NFRBN
nCE
ALEcLE
nRERY/BY
WE
SYSCON_RSTPAGE 3-4
2Gb/16GbNAND FLASH
NS_XTALO
NS_XTALI
M1
3
CXD9997G-AB
BD DRIVE
CN
1301
DVDBlu -rayDRIVE
CN
2460
CN
2470
BDP-BX38/S280/S380/S383
BA1BA2
/RESET
N8
M2
M3
K1
AD12
Y14
AC15
AC12
AC11
RRESET
M2
M3
K1
N8
L3
J3
K3
K9
J7
K1
K7
L2
/RESET
BA1BA2
N8
M2
M3
K1
N8
M2
M3
Y25
BA1 BA2
/RESET
L3
J3
K3
K9
J7
K1
K7
L2
RRESET_B
AUX1
CEC PULL-UPISOLATING SWITCH
VIDEO AMP
IC101
IC1003
IC907
C18B19C17
345
1
7
8
A19
D7
E8
YPBPR
C8
E9
B13
A13
B14
A14
B15
B16
A16
E23
A15
12
10
9
14
YINPBINPRIN
VIN
MUTE 2
LPF SEL
PYOUT
PBOUT
PROUT
VOUT
L
R
TX2P 1346791012
19
13CEC
IT-CON
Q702 PAGE 3-4
3-3. AV OUT BLOCK DIAGRAM
3-3
BDP-BX38/S280/380/383
VIDEO
AUDIOLINE OUT
COMPONENTVIDEO OUT
COAXIALDIGITAL OUT
PCM/DTS/DOLBYDIGITAL
CN701
J901
AUDIO LINEDRIVER
OUTL
OUTR
MUTE
INL
INR
IFCON_XMUTE
Q901
TX2NTX1PTX1NTX0PTX0NTCKPTCKN
TMDS DATA2+TMDS DATA2-TMDS DATA1+TMDS DATA1-TMDS DATA0+TMDS DATA0-TMDS CLOCK+TMDS CLOCK-
HPD
CEC
HDMI OUT
TX2PTX2NTX1PTX1NTX0PTX0NTCKPTCKN
CH2_PCH2_MCH1_PCH1_MCH0_PCH0_MCLK_PCLK_M
HTPLG
SPDIF
AMUTE
AOBCK/R
AOMCLK/L
SDA
SCL
VDACX_OUT
FORMAT1
XVMUTE
CVBS
YPBPRVDACR_OUT
VDACB_OUTVDACG_OUT
LORTNOC YROMEM F/I ATASF/I TENREHTE IMDH ,TUO V/A
F/I BSUBA-G7999DXC
PSD ,LORTNOC METSYS NIAM
XAMUTE
MB-138 BOARD
6 MUTE 1
7P JACK
D11
C11
1
10119
2
7
22
3
MB-138 BOARD
CN1102
CN1202
12
RXD0
SIRCS_IN
LAN (100)
B4
A3
B5
A4
L22
K22
L23
B7
L21
A7
K23
AC3
GPIO2
GPIO1
GPIO6
VSTB
GPIO4
GPIO5
J22
J23
35
KEY1
IF-170 BOARD
131516
5
10
1198
19
14
7
98
IC702VFD DRIVER
IC703REMOTE
CONTROL RECEIVER
DINCLKSTB
VACCUMFLOURESCENT
DISPLAY
Q709LED DRIVER
D709(WHITE)
ND701
CN702
GRD1 - GRD8
SEG1 -SEG17
CN1204
S331
CN331
FL-203 BOARD
1 1
36
KEY3
27
KEY2
38
KEY1
KEY3
KEY2
CN801
3
2
22
21
3 2
CN201
D+
D-
DM
DP
3-4. USB/ETHER BLOCK DIAGRAM
3-4
EXCEPT: BDP-S280
USB
IC1203
EXT
CN604DM DP
4
7
8
EXCEPT: BDP-S280
22 223 121 3
CN1203
37
S701S702S703
DM0
DP0
TXVN_0
TXVP_0
TXVN_1
TXVP_1
13
14
16
31
48
47
49
3
30
43
51
25
8
34
33
BDP-BX38/280/380/383
LED_WHITE
KEYO
TXD0
LED_WHITE
Y1
Y2
AB1
AB2
CXD9997G-AB
AC4
AA5
The components identifi ed by mark or dotted line with mark
are critical for safety.Replace only with part number specifi ed.
1
5
3
5
3
6 6
IC305
CN301
VCC1
2
1
77
SWIT
CHIN
G R
EGUL
ATO
R :
IC 302
DC DC 4V
+3.3V
IC307
IC7041
1
IC107
1
IC106
IC206
IC101
AVDD33_HDMI
CORE_1.1V
IC907AUDIOLINE DRIVERPCONT3
DAC 3.3 V
IC309
IC304
IC306
IC 501NANDFLASH
1
1
1
DDR3_1.5VVREF_0.75V
1.2V CPU1.2V
HDMI_1.2V
3.3V CPU-3.3VA
IC 1361
IC 2401
USB_VBUS_PCONT1
IC 303+5V
IC 601
IC 603+5V
IC 705
+5V
FE_SW12V
IC 1401MOTORDRIVER
FE_SW5V
IC 301+3.3V
OPT
SW5V
18
18
NISECON
ICE
3.3V
SW3.3V
8V
IC 1203
IF CON
MB-138 BOARD
PCONT2
PCONT3
PCONT1
PCONT_CORE
ATA_PCONT1
BDP-BX38/280/380/383
3 -5E
3-5. POWER BLOCK DIAGRAM
16-17
14
13
(AC IN)
UNSW12V
FE_GND_M
CN301
GND
FE-UNSW 12V PS301 FE-UNSW 12V
REGULATOR
PCONT3REGULATOR
PCONT_CORE
+1.1VREGULATOR
REGULATORPCONT3
+3.3V
PCONT3
REGULATOR+1.2V
REGULATOR+5V
ATA_PCONT1
Q303
Q302 REGULATOR
PCONT3
FR_6V
MOTORDRIVER
+8V
CN1102
CN1101
REGULATOR
REGULATOR
REGULATOR
HDMI 5V
USB 5V
USB 5V+5V
REGULATOR
REGULATORUNSW3.3V
CN 1502
(IFCON FLASH WRITER)
CN604
HDMI OUT
CN701
CN1401
SDRAMDDR3
SDRAMDDR3
SDRAMDDR3
5 18
7-8
10
11
PS1201D7019
LED WHITE
Q706,Q707DCDC
CONVERTER
Q709LED DRIVE
D705,D706RECT
IC701REMOTE CONTROL
R708RECEIVER
IC702VFD DRIVE
ND701FLUORESENT
INICATORTUBE
1 EXTCN202
IT_3.3V
CXD9997G-AB
APS-
279(
BDP-
S280
:EXC
EPT
US,C
ND/S
380:E
XCEP
T US
,CND
/S38
3)SR
V222
4UC(
BX38
/S28
0:US,
CND/
S380
:US,
CND)
IF-170 BOARD
PCONT3
PS302
CN702CN1204
+3.3V
USB
EXT
USB
4 4
UNSW-12V
2 2
IC308DDR3_1.5V
PCONT3
IC310
DCDC6VPCONT1
DDR3_1.5VUNSW12V
1
DCDC6V
DCDC6V
DCDC6V
18
6 19
DCDC4V
DCDC4V
DCDC6V
UNSW12V
VOLTAGE DIVIDER
IC1003VIDEO
BUFFER
EXCEPT BDP-S280
EXCEPT BDP-S280
4-1
BDP-BX38/S280/S380/S383
SECTION 4SCHEMATIC DIAGRAMS
All capacitors are in F unless otherwise noted. pF : F. 50V or less are not indicated except for electrolytics and tantalums.
All resistors are in ohms, 1/4 W (Chip resistors : 1 /10 W) un-less otherwise specified.
k =1000 , M =1000k . % : indicates tolerance. Caution when replacing chip parts.
New parts must be attached after removal of chip. Be careful not to heat the minus side of tantalum capacitor, because
it is damaged by the heat. Constants of resistors, capacitors, ICs and etc with XX indicate
that they are not used. In such cases, the unused circuits may be indicated. All variable and adjustable resistors have characteristic curve B,
unless otherwise noted. : nonflammable resistor : fusible resistor : panel designation
f : internal component. : adjustment for repair. : B+ Line : B– Line
Circled numbers refer to waveforms. Voltages are dc between measurement point. Readings are taken with a color-bar signals on Blu-ray disc. Readings are taken with a digital multimeter (DC 10M ). Voltage variations may be noted due to normal production tolerances.
Note: The components identified by mark or dotted line with mark are critical for safety.Replace only with part num-ber specified.
Note: Les composants identifiés par une marque sont critiquens pour la sécurité.Ne les remplacer que par une pièce portant le numéro spéci-fié.
When indicating parts by reference number, please include the board name.
4-1. THIS NOTE IS COMMON FOR SCHEMATIC DIAGRAMS
1
A
B
C
D
E
F
G
H
I
J
2 12 1311109876543 14
BDP-BX38/S280/S380/S383
4-2
4-2. FRAME SCHEMATIC DIAGRAM
1
2
3
4
5
1
2
3
4
5
6
7
8
9
1
2
3
4
5
6
7
8
9
1
2
3
4
5
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
1
2
3
4
5
6
1
2
3
4
5
6
1 2 1 2 3 4 5 6 7 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23
1
2
3
4
5
1
2
3
4
5
6
7
1
2
3
4
5
6
1234
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 231 2
1
2
3
4
5
6
7
CN2470
CN24609P
NOMMOCWVU
DNGFBB/
AA/
CNxxx9P
COMMONWVU
FGNDB
/BA
/A
CNxxx
CN130145P
CNXXXX45P
CN13916P
MPXOUT1
GND
MPXOUT2
MPXOUT3
GIO13
CN13816P
3.3V
RXD
GND
TXD
JIG_MODE0
JIG_MODE1
CN12
03 2P
KEY0
(POW
ER)
GND
CN12
02 7P
NC MODE
IF_R
XD
IF_T
XD
GND
VCC
RESE
T
CN12
04 23P
GND
USB_
DP
USB_
DM
GND
USB_
VBUS
2
USB_
VBUS
1
GND
FLD_
STB
FLD_
SCK
GND
FLD_
DIN
GND
IT_3
.3V
LED_
WHIT
E
FLD_
PCON
T
FR_6
V
FR_6
V
GND
SIRC
S
GND
KEY1
(STO
P)
KEY2
(O/C
)
KEY3
(Pla
y)
CN12015P
GND
MODE
VCC
RESET
NC
CN3017P
CN11026P
CN6044P
CN70119P
CN70
223
P
KEY3
(PLA
Y)
KEY2
(0/C
)
KEY1
(STO
P) GND
SIRC
S
GND
FR_6
V
FR_6
V
FLD_
PCON
T
LED_
WHIT
E
IT_3
.3V
GND
FLD_
DIN
GND
FLD_
CLK
FLD_
STB
GND
USB_
VBUS
1
USB_
VBUS
2
GND
USB_
DM
USB_
DP GND
CN33
12P
KEY0
(POW
ER)
GND
CNxxx7P
LOAD-
LOAD+
GND
TRAY-IN
TRAY-OUT
5P
IF-170
TRAY-IN
TRAY-OUT
LOAD-
5P
LOAD+
GND
1-838-615-11/21OPT-001
1-838-617-11/21SPD-001
FFC
LDG-0021-838-619-11/21FFC
1-838-618-11/21FFC
FIM-031
AC OUT
SC_I
N(N)
AC_I
N(L)
CN1012P
P/S
SWITCHING REGULATOR831-BMYSSA GNIDAOL DBBU
DVD_RF-
F
BD_RF-
FD2
SA_A+
A
5.0V
BD_RF+
GND
C
GND
SA_B-
GND
TR
TEST_V
FD1
GND
D
FR2
LDEN
SCLK
GND
THERMO
DVD_RF+
SA_A-
GND
SA_B+
VC_PD
GND
GND
GND
G
MODE_A
SEN_LDD
GND
E
FR1
TD
H
SDIO
GND
8.0V
5V_PDB
MODE_B(2-->3)
GND
5V_PD
8.0V
BD_RF+
FD2
E
GND
GND
B
MODE_A
GND
FD1
SA_A-
MODE_B(2-->3)
LDEN
BD_RF-
SDIO
SEN_LDD
5.0V
C
THERMO
TEST_V
FR2
SCLK
FR1
DVD_RF-
GND
GND
GND
H
A
DVD_RF+
GND
GND
TR
D
TD
SA_B+
F
SA_A+
G
SA_B-
GND
GND
VC_PD
FFC
IFCO
N FL
ASH
WRIT
ER
SERVO MONITOR
NISECON
To I
F
IFCON DEBUGGER
GND
FE_UNSW12V
FE_GND_M
UNSW12V
UNSW-12
GND
UNSW12V
RXD
GND
NISECON
JIG_MODE1
JIG_MODE0
TXD
3.3V
REAR
SDA
TMDS
CLO
CK +
TMDS
DAT
A2 -
TMDS
CLO
CK - SCL
TMDS
DAT
A0 -
PART
S BO
DY
+5V
POWE
R
TMDS
CLO
CK S
HIEL
D
TMDS
DAT
A0 S
HIEL
D
TMDS
DAT
A1 S
HIEL
D
TMDS
DAT
A0 + HPD
PART
S BO
DY
DDC/
CEC
GND
TMDS
DAT
A1 +
TMDS
DAT
A2 +
TMDS
DAT
A1 -
PART
S BO
DY
TMDS
DAT
A2 S
HIEL
D CEC
PART
S BO
DY
RESE
RVED
HDMI
FL-203
Harness
FLM-0011-967-315-11/21
FE_UNSW12V
UNSW12V
FE_GND_M
UNSW12V
UNSW-12
GND
GND
Harness
PM-1631-967-499-11/21
ETHERNETCN801
VBUSDMDPGND
4-3
1
A
B
C
D
E
F
G
H
I
J
2 12 1311109876543 14
4-3. BOARD (FRONT LEFT ) SCHEMATIC DIAGRAM • See page 5-3 for printed wiring board.- Ref. No.: board; 20,000 series -
BDP-BX38/S280/S380/S383
by mark or dotted line with mark are critical for safety.Replace only with part number
IF-170
IF-170
2
IF-170 BOARD31
A
B
4-4. IF-170 BOARD (USB FRONT) SCHEMATIC DIAGRAM- Ref. No.: IF-170 board; 20,000 series -• See page 5-3 for printed wiring board.
4-4
BDP-BX38/S280/S380/S383
BDP-BX38/S280/S380/S383
2
FL-203 BOARD31
A
B
4-5. FL-203 BOARD (POWER) SCHEMATIC DIAGRAM- Ref. No.: FL-203 board; 20,000 series -• See page 5-3 for printed wiring board.
4-5
4 6
BDP-BX38/S280/S380/S383
1
A
B
C
D
E
F
G
H
I
J
2 12 1311109876543 14
4-6. MB-138 BOARD (DDR 3 A ) SCHEMATIC DIAGRAM (1/14) • See page 5-4 for printed wiring board.- Ref. No.: MB-138 board; 10,000 series
4-7
BDP-BX38/S280/S380/S3838
1
A
B
C
D
E
F
G
H
I
J
2 12 1311109876543 14
4-7. MB-138 BOARD (DDR 3 B) SCHEMATIC DIAGRAM (2/14) • See page 5-4 for printed wiring board.- Ref. No.: MB-138 board; 10,000 series
4-8
BDP-BX38/S280/S380/S3838
1
A
B
C
D
E
F
G
H
I
J
2 12 1311109876543 14
The components identifi ed by mark or dotted line with mark are critical for safety.Replace only with part number specifi ed.
4-8. MB-138 BOARD (POWER) SCHEMATIC DIAGRAM (3/14) • See page 5-4 for printed wiring board.- Ref. No.: MB-138 board; 10,000 series
BDP-BX38/S280/S380/S383
4-9
1
A
B
C
D
E
F
G
H
I
J
2 12 1311109876543 14
4-9. MB-138 BOARD (CLK/POWER) SCHEMATIC DIAGRAM (4/14) • See page 5-4 for printed wiring board.- Ref. No.: MB-138 board; 10,000 series
4-10
BDP-BX38/S280/S380/S383
1
A
B
C
D
E
F
G
H
I
J
2 12 1311109876543 14
4-10. .MB-138 BOARD (FLASH/HOST) SCHEMATIC DIAGRAM (5/14) • See page 5-4 for printed wiring board.- Ref. No.: MB-138 board; 10,000 series
4-11
BDP-BX38/S280/S380/S383
4-11. MB-138 BOARD (USB) SCHEMATIC DIAGRAM (6/14) • See page 5-4 for printed wiring board.- Ref. No.: MB-138 board; 10,000 series
B
C
D
E
F
G
H
I
J
2 12111098765431
A
1
A
B
C
D
E
F
G
H
I
J
2 12 1311109876543 14
4-12
BDP-BX38/S280/S380/S383
4-12. MB-138 BOARD (HDMI) SCHEMATIC DIAGRAM (7/14) • See page 5-4 for printed wiring board.- Ref. No.: MB-138 board; 10,000 series
1
A
B
C
D
E
F
G
H
I
J
2 12 1311109876543 14
4-13
BDP-BX38/S280/S380/S383
4-13. MB-138 BOARD (ETHERNET) SCHEMATIC DIAGRAM (8/14) • See page 5-4 for printed wiring board.- Ref. No.: MB-138 board; 10,000 series
4-14
BDP-BX38/S280/S380/S3838
1
A
B
C
D
E
F
G
H
I
J
2 12 1311109876543 14
-
4-14. MB-138 BOARD (AUDIO) SCHEMATIC DIAGRAM (9/14) • See page 5-4 for printed wiring board.- Ref. No.: MB-138 board; 10,000 series
BDP-BX38/S280/S380/S383
4-15
1
A
B
C
D
E
F
G
H
I
J
2 12 1311109876543 14
4-15. MB-138 BOARD (VIDEO) SCHEMATIC DIAGRAM (10/14) • See page 5-4 for printed wiring board.- Ref. No.: MB-138 board; 10,000 series
0.32V
2.2V
0.32V
0.69V
3.3V
3.3V
1.9V
0.0V
1.9V
0
1.3V
5.0V
1.3V
1
2
3
8
7
6
54
0.69V
BDP-BX38/S280/S380/S383
4-16
1
A
B
C
D
E
F
G
H
I
J
2 12 1311109876543 14
4-16. MB-138 BOARD (GPIO/JTAG) SCHEMATIC DIAGRAM (11/14) • See page 5-4 for printed wiring board.- Ref. No.: MB-138 board; 10,000 series
BDP-BX38/S280/S380/S383
4-17
1
A
B
C
D
E
F
G
H
I
J
2 12 1311109876543 14
4-17. MB-138 BOARD (IFCON) SCHEMATIC DIAGRAM (12/14) • See page 5-4 for printed wiring board.- Ref. No.: MB-138 board; 10,000 series
BDP-BX38/S280/S380/S383
4-18
1
A
B
C
D
E
F
G
H
I
J
2 12 1311109876543 14
4-18. MB-138 BOARD (FE_POWER/OP/GIO) SCHEMATIC DIAGRAM (13/14) • See page 5-4 for printed wiring board.- Ref. No.: MB-138 board; 10,000 series
BDP-BX38/S280/S380/S383
4-19
1
A
B
C
D
E
F
G
H
I
J
2 12 1311109876543 14
4-19. MB-138 BOARD (FE_POWER_MOTOR DRIVE) SCHEMATIC DIAGRAM (14/14) • See page 5-4 for printed wiring board.- Ref. No.: MB-138 board; 10,000 series
H1.0Vp-p
H1.4Vp-p
MB-138 BOARD
H1.2Vp-p
1 (VIN)IC1003
IC1003
IC1003
IC1003
IC1003
IC1003
IC1003
(PYIN)3
(PBIN)4
(PRIN)5
(PROUT)9
10
(YOUT)12IC1003
IC1003 (VOUT)14
(PBOUT)
IC101 (NS_XTAL_I)
27 MHz3.3 Vp-p
Vpp
BDP-BX38/S280/S380/S3838
4-20E
4-20. WAVEFORMS
H0.7Vp-p
H1.4Vp-p
H2.0Vp-p
H2.4Vp-p
H0.7Vp-p
A12
5-1
SECTION 5PRINTED WIRING BOARDS
5-1. THIS NOTE IS COMMON FOR PRINTED WIRING BOARDS
2 1
3
2 1
3
2 1
3
3 4 5
2 1
1 2 3
6 5 4
E B
C
3 1
55
2
4 6
1 2 3
5 4Transistor Diode
• : Uses unleaded solders.• : Pattern from the side which enables seeing. (The other layers’ patterns are not indicated)
• Through hole is omitted.• There are few cases that the part printed on diagram isn’t mounted
in this model.• : panel designation• Chip parts.
Caution:Pattern face side: (SIDE B)Parts face side:(SIDE A)
Parts on the pattern face side seen from the pattern face are indicated.Parts on the parts face side seen from the parts face are indicated.
BDP-BX38/S280/S380/S383
5-2
BDP-BX38/S280/S380/S383
There are a few cases that the part isn’t mounted in this model is printed on this diagram.
: Uses unleaded solder.
5-2. FL-203 (REAR) BOARD PRINTED WIRING BOARD- Ref. No.: FL-203 board; 20,000 series -• See page 2-5 for circuit boards location.
FL-203 BOARD (SIDE A)
CN331 A-1
FL-203 BOARD (SIDE A)
A
1 2111-882-035-
There are a few cases that the part isn’t mounted in this model is printed on this diagram.
: Uses unleaded solder.
5-3. IF-170 BOARD (FRONT RIGHT) PRINTED WIRING BOARD (SIDE A) • See page 2-5 for circuit boards location. - Ref. No.: IF-170 board; 20,000 series -
IF-170 BOARD (SIDE A)
CN371 A-7
D702 A-1D705 A-3D706 A-3D707 A-3
IC701 A-3IC702 B-5
Q703 A-1Q704 A-1Q706 A-3Q707 A-3Q709 B-1
IF-170 BOARD (SIDE A)
A
B
1 2 543 76
5-3
CN372 A-7
1 2 543 76
A
B
IF-170 BOARD (SIDE B)
11
11
BDP-BX38/S280/S380/S383
1-882-034-
1-882-034-
There are a few cases that the part isn’t mounted in this model is printed on this diagram.
: Uses unleaded solder.
5-4. MB-138 BOARD (MAIN) PRINTED WIRING BOARD (SIDE A) • See page 2-5 for circuit boards location.- Ref. No.: MB-138 board; 10,000 series -
B
5-4
A
B
C
D
E
F
1 2 543 6
MB-134 BOARD (SIDE A)
CN301 B-6CN302 A-5CN303 A-6CN601 C-2
CN701 G-3CN901 F-1CN902 F-2
CN1101 B-4
CN1201 G-6
D303 B-2D304 C-6
D603 D-2D604 C-2D605 C-2
IC105 C-5IC204 D-5IC205 E-5IC306 F-5IC307 F-2IC501 E-6IC502 E-5IC701 G-2IC901 G-5
Q909 G-1Q1502 A-4
CN602 C-2
CN1320 F-1CN1330 F-1
IC104 C-3
CN1382 B-2CN1401 E-1CN1424 D-2CN1491 E-2
CN1502 C-6CN1503 G-1CN1504 A-2CN1505 A-3CN1506 A-1
CN1501 A-5
CN1507 A-2
CN1509 C-6
CN2470 B-1CN2490 B-1
CN1510 A-3
IC1003 F-4IC1101 F-2IC1102 F-2IC1202 F-5IC1390 E-2IC1451 E-1IC1502 IC1503 A-4IC1504 B-4IC2301 B-1
IC1002 F-4
IC101 D-4
A-4
D606 C-2D701 G-3D901 F-5D904 G-5D905 G-5D906 G-2D1001 G-4D1002 G-5D1003 G-4D1004 G-5D1201 F-6
L301 B-5L303 A-2
L305 B-2L603 C-3L604 C-3L605 C-3L606 C-3L607 C-2L608 C-2L701 G-3L702 G-3L703 G-3L704 G-3L1001 F-4L1002 G-4L1003 F-4
D307 B-5
L304 B-6
CN1102 E-6
CN1508 A-6
CN2460 C-1
CN904 G-1
L2322 B-1L2324 B-1
X401 E-4X802 D-3X1351 D-3X1501 A-4X1502 A-5
MB-138 BOARD (SIDE A)
DP-BX38/S280/S380/S383
111-882-883-
There are a few cases that the part isn’t mounted in this model is printed on this diagram.
: Uses unleaded solder.
- Ref. No.: MB-138 board; 10,000 series -
5-5E
MB-134 BOARD (SIDE B)
Q1501 A-1
Q502 C-6Q503 C-6
BDP-BX38/S280/S380/S383
5-6. MB-138 BOARD (MAIN) PRINTED WIRING BOARD (SIDE B) • See page 2-5 for circuit boards location.
MB-138 BOARD (SIDE B)
B
C
D
E
12345605
A
IC1501 A-1IC1441 C-1
IC2401 D-1
IC602 F-3
IC2480 E-2
Q1503 F-3
IC1505 F-3
D601 E-2
D1501 F-3 D602 F-2
IC601 E-2IC312 E-1
IC309 F-2
D305 F-2
IC308 F-5IC305 B-4
IC311 E-5
D302 F-5
IC304 A-4Q501 C-6
L1202 B-6L1201 B-6
IC310 E-6
D306 E-6
Q302 E-1Q303 E-1
Q301 F-5
IC1201 B-6
L306 E-6L302 E-5
IC1001 B-4
IC302 F-5IC301 F-6
IC303 B-3
IC705 A-2IC704 A-3IC703 A-3IC702 B-3
Q701 A-3Q702 A-3
X1201 B-6
111-882-883-
BDP-BX38/S280/S380/S383
pyTlobmySniP e DescriptionJ9 DVCC10_K Power 1.15 V digital powerJ11 DVCC10_K Power 1.15 V digital powerJ14 DVCC10_K Power 1.15 V digital powerJ15 DVCC10_K Power 1.15 V digital powerJ17 DVCC10_K Power 1.15 V digital powerK10 DVCC10_K Power 1.15 V digital powerK14 DVCC10_K Power 1.15 V digital powerK16 DVCC10_K Power 1.15 V digital powerL9 DVCC10_K Power 1.15 V digital powerL17 DVCC10_K Power 1.15 V digital powerM10 DVCC10_K Power 1.15 V digital powerM16 DVCC10_K Power 1.15 V digital powerN9 DVCC10_K Power 1.15 V digital powerN17 DVCC10_K Power 1.15 V digital powerP10 DVCC10_K Power 1.15 V digital powerP16 DVCC10_K Power 1.15 V digital powerR9 DVCC10_K Power 1.15 V digital powerR17 DVCC10_K Power 1.15 V digital powerT10 DVCC10_K Power 1.15 V digital powerT12 DVCC10_K Power 1.15 V digital powerT14 DVCC10_K Power 1.15 V digital powerT16 DVCC10_K Power 1.15 V digital powerU9 DVCC10_K Power 1.15 V digital powerU11 DVCC10_K Power 1.15 V digital powerU13 DVCC10_K Power 1.15 V digital powerU15 DVCC10_K Power 1.15 V digital powerU17 DVCC10_K Power 1.15 V digital powerN18 DVCC18_IO_1 Power 1.8 V / 1.5 V digital IO powerN23 DVCC18_IO_1 Power 1.8 V / 1.5 V digital IO powerT18 DVCC18_IO_1 Power 1.8 V / 1.5 V digital IO powerT23 DVCC18_IO_1 Power 1.8 V / 1.5 V digital IO powerV9 DVCC18_IO_1 Power 1.8 V / 1.5 V digital IO powerV12 DVCC18_IO_1 Power 1.8 V / 1.5 V digital IO powerV14 DVCC18_IO_1 Power 1.8 V / 1.5 V digital IO powerV16 DVCC18_IO_1 Power 1.8 V / 1.5 V digital IO powerV18 DVCC18_IO_1 Power 1.8 V / 1.5 V digital IO powerW23 DVCC18_IO_1 Power 1.8 V / 1.5 V digital IO powerAB20 DVCC18_IO_1 Power 1.8 V / 1.5 V digital IO powerAB21 DVCC18_IO_1 Power 1.8 V / 1.5 V digital IO powerAC7 DVCC18_IO_1 Power 1.8 V / 1.5 V digital IO powerAC10 DVCC18_IO_1 Power 1.8 V / 1.5 V digital IO powerAC13 DVCC18_IO_1 Power 1.8 V / 1.5 V digital IO powerAC17 DVCC18_IO_1 Power 1.8 V / 1.5 V digital IO powerY21 AVDD12_MEM PLL Power 1.15V Analog Power for MEMPLLW21 AVSS12_MEM PLL Ground Analog Ground for MEMPLLAB24 TN_MEMPLL Analog Test PinAB25 TN_MEMPLL Analog Test PinK19 AVDD10_LDO Power 1.0V standby powerE13 AVDD12_27MP LL Power 1.15V Analog Power for PLLF13 AVDD12_APLL Power 1.15V Analog Power for APLLF14 AVDD12_DMP LL Power 1.15V Analog Power for DMPLLL20 AVDD33_LDO Power 3.3V power for standbyC14 AVDD33_XTAL Power 3.3V Analog Power for XTALE13 AVSS12_27MPLL Ground Analog Ground for PLLF12 AVSS12_AP LL Ground Analog Ground for APLLE12 AVSS12_DMPLL Ground Analog Ground for DMPLLL19 AVSS33_LDO Ground Analog ground for standbyD14 AVSS33_XTAL Ground Analog ground for XTALA12 NS_XTALI O 27MHz Crystal OutB12 NS_XTALO I 27MHz Crystal InD12 TN_PLLG Analog Test PinC12 TP_PLLG Analog Test PinC8 A O/I ETUM Audio muteC11 A O/IKCBO Audio out right ChannelE11 A O/IKCRLO NCD11 A O/IKCLMO Audio out left ChannelA10 AOSDATA0 I/O NCF11 AOSDATA1 I/O NCB10 AOSDATA2 I/O NCC10 AOSDATA3 I/O, 5V NC
dnuorg latigiD dnuorG DNGD12E ,22Ddnuorg latigiD dnuorG DNGD22F ,12Fdnuorg latigiD dnuorG DNGD61J ,01Jdnuorg latigiD dnuorG DNGD11K ,9Kdnuorg latigiD dnuorG DNGD51K ,31Kdnuorg latigiD dnuorG DNGD01L ,71Kdnuorg latigiD dnuorG DNGD21L ,11Ldnuorg latigiD dnuorG DNGD41L ,31Ldnuorg latigiD dnuorG DNGD61L ,51Ldnuorg latigiD dnuorG DNGD11M ,9M
MAIN SYSTEM CONTROL PIN FUNCTION (MB-138 BOARD IC 101 : CXD9997G-AA)
IC PIN FUNCTION DESCRIPTIONSECTION 6
6-1
dnuorg latigiD dnuorG DNGD31M ,21Mdnuorg latigiD dnuorG DNGD51M ,41Mdnuorg latigiD dnuorG DNGD01N ,71Mdnuorg latigiD dnuorG DNGD21N ,11Ndnuorg latigiD dnuorG DNGD41N ,31Ndnuorg latigiD dnuorG DNGD61N ,51Ndnuorg latigiD dnuorG DNGD9P ,22Ndnuorg latigiD dnuorG DNGD21P ,11Pdnuorg latigiD dnuorG DNGD41P ,31Pdnuorg latigiD dnuorG DNGD71P ,51Pdnuorg latigiD dnuorG DNGD11R ,01Rdnuorg latigiD dnuorG DNGD31R ,21Rdnuorg latigiD dnuorG DNGD51R ,41Rdnuorg latigiD dnuorG DNGD9T ,61Rdnuorg latigiD dnuorG DNGD31T ,11Tdnuorg latigiD dnuorG DNGD71T ,51Tdnuorg latigiD dnuorG DNGD01U ,22Tdnuorg latigiD dnuorG DNGD41U ,21Udnuorg latigiD dnuorG DNGD22W ,61Udnuorg latigiD dnuorG DNGD8Y ,6Y
A dnuorg latigiD dnuorG DNGD7AA ,6AA dnuorg latigiD dnuorG DNGD7BA ,02AA dnuorg latigiD dnuorG DNGD31BA ,01BA dnuorg latigiD dnuorG DNGD12CA ,71BJ12 DGND_PWM Ground Digital ground for PWMJ13 DGND_PWM Ground Digital ground for PWMK12 DGND_PWM Ground Digital ground for PWMM7 DVCC33_IO Power 3.3 V digital IO powerN7 DVCC33_IO Power 3.3 V digital IO powerP7 DVCC33_IO Power 3.3 V digital IO powerY7 DCC33_IO_2 Power 3.3 V digital IO powerE20 DVCC33_IO_3 Power 3.3 V digital IO powerF19 DVCC33_IO_3 Power 3.3 V digital IO powerG12 DVCC33_IO_6 Power 3.3 V digital IO powerG10 DVCC33_IO_P WM Power 3.3 V digital IO power for PWMG11 DVCC33_IO_P WM Power 3.3 V digital IO power for PWMJ20 DVCC33_IO_S TB Power 3.3 V digital IO power for Stand-By ModuleJ21 DVCC33_IO_S TB Power 3.3 V digital IO power for Stand-By ModuleE10 AOSDATA4 I/O, 5V NCD10 AOSDATA5 I/O, 5V NC
V5 ,O/INICM9D NCV5 ,O/IKCBPS 01F NCV5 ,O/IATADPS9B NC
O/IFIDPS 9E SPDIF outV5 ,O/I KCRLPS9A NCV5 ,O/I KLCMPS9C NC
C19 AVDD33_VDA C_BG Power 3.3V Analog PowerD17 AVDD33_VDA C_R Power 3.3V Analog PowerD19 AVDD33_VDA C_X Power 3.3V Analog PowerE18 AVSS33_VDAC _BG Ground Analog GroundE17 AVSS33_VDAC _R Ground Analog GroundE19 AVSS33_VDAC _X Ground Analog GroundD18 FS Analog DAC full scaleB19 VDACB_OUT Analog DAC outputC18 VDACG_OUT Analog DAC outputC17 VDACR_OUT Analog DAC outputA19 VDACX_OUT Analog DAC outputJ24 GPIO8 /VOUTCLK1 I/O, 5V Nand Write protect (NC)E24 ETTXER /VOUTD0 I/O NCE25 ETRXER /VOUTD1 I/O NCG22 ETTXD0 /VOUTD10 I/O NCG21 ETTXD1 /VOUTD11 I/O NCH20 ETTXD2 /VOUTD12 I/O NCH23 ETTXD3 /VOUTD13 I/O NCH22 ETTXEN /VOUTD14 I/O NCK20 ETCOL /VOUTD15 I/O NCF23 ETCRS /VOUTD2 I/O NCF24 ETRXDV /VOUTD3 I/O NCF25 ETRXD0 /VOUTD4 I/O, 5V NCG20 ETRXD1 /VOUTD5 I/O, 5V NCH21 ETRXD2 /VOUTD6 I/O, 5V NCG24 ETRXCLK /VOUTD7 I/O, 5V NCG25 ETRXD3 /VOUTD8 I/O, 5V NCG23 ETTXCLK /VOUTD9 I/O NCK25 ETMDIO /VOUTHSYNC I/O NCJ25 ETMDC /VOUTVSYNC I/O NCC15 AVDD12_HDMI Power 1.15V Analog PowerD15 AVDD12_HDMI Power 1.15V Analog PowerC16 AVDD33_HDMI Power 3.3V Analog PowerD16 AVDD33_HDMI Power 3.3V Analog PowerE15 AVSS12_HDMI Ground Analog GroundF15 AVSS12_HDMI Ground Analog GroundE16 AVSS33_HDMI Ground Analog Ground
BDP-BX38/S280/S380/S383
6-2
A 03 tib atad yromeM O/I 03QDR9CA 13 tib atad yromeM O/I 13QDR 9B
0 tib ksam atad yromeM O 0MQDR 71YA 1 tib ksam atad yromeM O 1MQDR81BA 2 tib ksam atad yromeM O 2MQDR 8BA 3 tib ksam atad yromeM O 3MQDR 8CA 0 tib eborts atad evitisop yromeM O/I 0SQDR 91DA 0 tib eborts atad evitagen yromeM O/I _0SQDR 91EA 1 tib eborts atad evitisop yromeM O/I 1SQDR 02EA 1 tib eborts atad evitagen yromeM O/I _1SQDR 02DA 2 tib eborts atad evitisop yromeM O/I 2SQDR 6DA 2 tib eborts atad evitagen yromeM O/I _2SQDR 6EA 3 tib eborts atad evitisop yromeM O/I 3SQDR 7EA 3 tib eborts atad evitagen yromeM O/I _3SQDR 7DA noitarbilac revird pihc-nO I NDTXER 32EA elbane noitanimret eid no yromeM O TDOR 11B
eborts sserdda wor yromeM O _SARR 11YW12 RVREF_1 I Memory VREFY19 RVREF_1 I Memory VREFA elbane etirw yromeM O _EWR 21E
teser yromeM O TESERR 41YA 0 tib sserdda yromeM O B_0AR 32B
1 tib sserdda yromeM O B_1AR 22VA 2 tib sserdda yromeM O B_2AR 52CA 3 tib sserdda yromeM O B_3AR 42C
4 tib sserdda yromeM O B_4AR 32VA 5 tib sserdda yromeM O B_5AR 32A
6 tib sserdda yromeM O B_6AR 42U7 tib sserdda yromeM O B_7AR 22Y8 tib sserdda yromeM O B_8AR 52U9 tib sserdda yromeM O B_9AR 32Y01 tib sserdda yromeM O B_01AR 42W11 tib sserdda yromeM O B_11AR 32U21 tib sserdda yromeM O B_21AR 52W31 tib sserdda yromeM O B_31AR 42Y
A 0 tib sserdda knab yromeM O B_0ABR 52D1 tib sserdda knab yromeM O B_1ABR 22U
A 2 tib sserdda knab yromeM O B_2ABR 22CAD23 RCAS__B O Memory column address strobe
elbane kcolc yromeM O B_EKCR 12VM24 RCLK0_B O Memory clock 0 positiveM25 RCLK0__B O Memory clock 0 negativeA tceles pihc yromeM O B__SCR 42D
0 tib atad yromeM O/I B_0QDR 12U1 tib atad yromeM O/I B_1QDR 02U2 tib atad yromeM O/I B_2QDR 42T3 tib atad yromeM O/I B_3QDR 52T4 tib atad yromeM O/I B_4QDR 02M5 tib atad yromeM O/I B_5QDR 32M6 tib atad yromeM O/I B_6QDR 22M7 tib atad yromeM O/I B_7QDR 12M8 tib atad yromeM O/I B_8QDR 22R9 tib atad yromeM O/I B_9QDR 32R
P23 RDQ10_B I/O Memory data bit 10P22 RDQ11_B I/O Memory data bit 11P20 RDQ12_B I/O Memory data bit 12R20 RDQ13_B I/O Memory data bit 13R21 RDQ14_B I/O Memory data bit 14P21 RDQ15_B I/O Memory data bit 15T21 RDQM0_B O Memory data mask bit 0T20 RDQM1_B O Memory data mask bit 1P24 RDQS0_B I/O Memory positive data strobe bit 0P25 RDQS0__B I/O Memory negative data strobe bit 0N25 RDQS1_B I/O Memory positive data strobe bit 1N24 RDQS1__B I/O Memory negative data strobe bit 1A elbane noitanimret eid no yromeM O B_TDOR 42EAC23 RRAS__B O Memory row address strobeR19 RVREF_3 I Memory VREFA elbane etirw yromeM O B__EWR 52EY25 RRESET_B O Memory resetA colc nacs yradnuob GATJ / kcolc ECI GATJ O/I KCT 2C kA ni atad nacs yradnuob GATJ / ni atad ECI GATJ O/I IDT2DA uo atad nacs yradnuob GATJ / tuo atad ECI GATJ O/I ODT 1C tA celes edom yradnuob GATJ / tceles edom ECI GATJ O/I SMT1D tA teser ECI GATJ O/I _TSRT 1E
V5 ,O/I CEC02F NCV5 ,O/I 0OIPG8D Syscon Req (IFCON)V5 ,O/I1OIPG 7A Start Bit (IFCON)V5 ,O/I 2OIPG 7B XIF_CS(IFCON)V5 ,O/I 3OIPG 7C NCV5 ,O/I 4OIPG4CA NCV5 ,O/I 5OIPG5AA NCV5 ,O/I 6OIPG 3CA UPG_STATUSV5 ,O/I7OIPG 4BA USB_Vbus_Pcont
D23 HDMISCK I/O, 5V HDMI I2C ClockV5 ,O/IDSIMDH 22E HDMI I2C DataV5 ,O/IGLPTH 32E HDMI Hot Plug
BDP-BX38/S280/S380/S383
6-4
F16 AVSS33_HDMI Ground Analog GroundA15 CH0_M Analog HDMI TX data 0 differential pair (M)
)P( riap laitnereffid 0 atad XT IMDHgolanA P_0HC 51BA14 CH1_M Analog HDMI TX data 1 differential pair (M)B14 CH1_P Analog HDMI TX data 1 differential pair (P)A13 CH2_M Analog HDMI TX data 2 differential pair (M)B13 CH2_P Analog HDMI TX data 2 differential pair (P)A16 CLK_M Analog HDMI TX clock differential pair (M)B16 CLK_P Analog HDMI TX clock differential pair (P)A17 EXT_CAP Analog HDMI AIOB17 EXT_RES Analog HDMI reference voltage
O/I KCFS 02C NCO/I SCFS 02A NCO/I IDFS02B NCO/IODFS 02D NCO/I ELAFN 12D NAND Flash address latch enableO/I NECFN 22C NAND Flash chip enableO/I2NECFN 22A NCO/I ELCFN 22B NAND Flash command latch enableO/I 0DFN 32C NAND Flash Data input/output bit0O/I 1DFN52A NAND Flash Data input/output bit1O/I 2DFN 42B NAND Flash Data input/output bit2O/I3DFN 52B NAND Flash Data input/output bit3O/I4DFN 42C NAND Flash Data input/output bit4O/I 5DFN 52C NAND Flash Data input/output bit5O/I 6DFN 42D NAND Flash Data input/output bit6O/I 7DFN 52D NAND Flash Data input/output bit7O/INBRFN 32B NAND Flash ready/busy
A O/I2NBRFN 42 NCO/I NERFN32A NAND Flash read enableO/I NEWFN12C NAND Flash write enable
A 0 tib sserdda yromeM O 0AR 21AA 1 tib sserdda yromeMO1AR 51BA 2 tib sserdda yromeM O2AR 31EA 3 tib sserdda yromeM O3AR21BA 4 tib sserdda yromeM O 4AR 51A
5 tib sserdda yromeM O 5AR 21Y6 tib sserdda yromeM O 6AR 61Y
A 7 tib sserdda yromeM O 7AR 31DA 8 tib sserdda yromeM O 8AR61AA 9 tib sserdda yromeM O 9AR41CA 01 tib sserdda yromeM O 01AR 41D
11 tib sserdda yromeM O 11AR 51YA 21 tib sserdda yromeM O 21AR 41EA 31 tib sserdda yromeM O 31AR 41BA 0 tib sserdda knab yromeM O 0ABR 21DA 1 tib sserdda knab yromeM O 1ABR 51CA 2 tib sserdda knab yromeM O 2ABR 21CA eborts sserdda nmuloc yromeM O _SACR 11AA elbane kcolc yromeM O EKCR 41AA evitisop 0 kcolc yromeM O 0KLCR22DA evitagen 0 kcolc yromeM O _0KLCR22EA evitisop 1 kcolc yromeM O 1KLCR01DA evitagen 1 kcolc yromeM O _1KLCR 01EA tceles pihc yromeM O _SCR 11CA 0 tib atad yromeM O/I 0QDR61EA 1 tib atad yromeM O/I 1QDR 61DA 2 tib atad yromeM O/I 2QDR 61CA 3 tib atad yromeM O/I 3QDR 61BA 4 tib atad yromeM O/I 4QDR 12DA 5 tib atad yromeM O/I 5QDR12EA 6 tib atad yromeM O/I 6QDR02C
7 tib atad yromeM O/I 7QDR 81YA 8 tib atad yromeM O/I 8QDR 71EA 9 tib atad yromeM O/I 9QDR 71DA 01 tib atad yromeM O/I 01QDR 81CA 11 tib atad yromeM O/I 11QDR71AA 21 tib atad yromeM O/I 21QDR 91AA 31 tib atad yromeM O/I 31QDR 91CA 41 tib atad yromeM O/I 41QDR 81AA 51 tib atad yromeM O/I 51QDR91BA 61 tib atad yromeM O/I 61QDR 3DA 71 tib atad yromeM O/I 71QDR4DA 81 tib atad yromeM O/I 81QDR 3EA 91 tib atad yromeM O/I 91QDR 4EA 02 tib atad yromeM O/I 02QDR 01A
12 tib atad yromeM O/I 12QDR 01Y22 tib atad yromeM O/I 22QDR 9Y
A 32 tib atad yromeM O/I 32QDR 9AA 42 tib atad yromeM O/I 42QDR 6BA 52 tib atad yromeM O/I 52QDR5BA 62 tib atad yromeM O/I 62QDR 5CA 72 tib atad yromeM O/I 72QDR 6CA 82 tib atad yromeM O/I 82QDR9EA 92 tib atad yromeM O/I 92QDR 9D
BDP-BX38/S280/S380/S383
6-3
V5 ,O/I RI 12K NCV5 ,O/I DRDCL22K IFSDI
eser no rewoP dnE-tnorF I ITSR 2B tlortnoC rewoPV5 ,O/IBSRWPO 42Keser no rewoP V5 ,I _TESER 32K t
V5 ,O/I DXRAU 22J RS232 RXV5 ,O/IDXTAU 32J RS232 TXV5 ,O/I KLCV32L IF_SCKV5 ,O/I ATADV 22L IF_SDOV5 ,O/I BTSV 12L FE_RST_IV5 ,O/I LCS 7D XVMUTE, Video MuteV5 ,O/IADS 8E Format1, HD/SD selection
V5 AVDD12_USB_1P Power 1.15V Analog power for USBY3 AVDD33_USB_1P Power 3.3V Analog power for USBW5 AVSS12_USB_1P Ground Analog ground for USBY4 AVSS33_USB_1P Ground Analog ground for USBY1 USB_DM Analog USB port3 differential serial data bus (minus)Y2 USB_DP Analog USB port3 differential serial data bus (plus)W3 USB_VRT_1P Analog USB reference resistorW4 AVDD12_USB_2P Power 1.15V Analog power for USBAA3 AVDD33_USB_2P Power 3.3V Analog power for USBW6 AVSS12_USB_2P Ground Analog ground for USBAA4 AVSS33_USB_2P Ground Analog ground for USBAB1 USB_DM0 Analog USB port1 differential serial data bus (minus)AA1 USB_DM1 Analog USB port2 differential serial data bus (minus)AB2 USB_DP0 Analog USB port1 differential serial data bus (plus)A )sulp( sub atad laires laitnereffid 2trop BSUgolanA 1PD_BSU 2AAB3 USB_VRT Analog USB reference resistorA gnimmargorp esuf-E rof rewop V5.2 rewoP QRWPFE2ED4 AVDD33_REC Power HVGA analog powerC5 AVDD33_LD Power TX0 analog powerC6 AVDD33_COM Power PLL/BG 3.3V analog powerE6 AVSS33_REC Ground HVGA analog groundD5 AVSS33_LD Ground TX0 analog groundD6 AVSS33_COM Ground PLL/BG 3.3V analog groundE7 AVDD12_COM Power PLL 1.15V analog powerF7 AVDD12_REC Power ADC analog powerF9 AVSS12_COM Ground PLL 1.15V analog groundF8 AVSS12_REC Ground ADC analog groundA3 TXVP_0 Analog Ethernet TD+A +DR tenrehtEgolanA 1_PVXT 4B4 TXVN_0 Analog Ethernet TDA5A5 REXT Analog External reference resistorB5 TXVN_1 Analog Ethernet RDA6A6 TANA_1 Analog Ethernet analog test pin #1B6 TANA_0 Analog Ethernet analog test pin #0J6 AGND33_1 Analog Ground Analog GroundJ5 AGND33_2 Analog Ground Analog GroundL5 AGND33_3 Analog Ground Analog GroundF5 AGND12_1 Analog Ground Analog GroundL6 AGND12_2 Analog Ground Analog GroundD3 AUX1 AnalogI/O Auxiliary Input Alternative Function : Signal MonitoringE5 AVDD12_1 Analog Power(1.15V) Power PinK3 AVDD12_2 Analog Power(1.15V) Power PinH5 AVDD33_1 Analog Power(3.3V) Power PinK4 AVDD33_3 Analog Power(3.3V) Power PinP2 FECFREQ 3.3V LVTTL Frequency selection signal output, or LDD serial interface data
I/O, or I2C SDA. The pin is spike-free at power-on stage.5V-tolerance,Slow slew,2, 4, 6, 8mAPDR,75K pull-up
o ,tuptuo langis noitceles edom noitaludom ycneuqerf hgiHLTTVL V3.3DOMCEF 3R rI/O, LDD serial interface command enable. The pin is spike-free at5V-tolerance, power-on stage.Slow slew,2, 4, 6, 8mAPDR,75K pulldown
M1 FEDMO Analog Output Disk motor control output. DAC output.T4 FEEJECT_ 3.3V LVTTL Eject/stop key input, active low. The pin is spike-free at poweron
I/O, stage.5V-tolerance,6 mA PDR,75K pull-up
K5 EQBIAS Analog Output External Bias Connection for Circuitsno-rewop ta eerf-ekips si nip ehT .tupni rosnes llaH rotoMLTTVL V3.3GFEF 3V
I/O, stage.5V-tolerance,6 mA PDR,75K pull-up
L3 FEFMO1 Analog Output Feed motor 1 control. DAC output.M2 FEFMO2 Analog Output Feed motor 2 control. DAC output.M4 FEFMO3 AnalogI/O Feed motor 3 control. DAC output.
Alternative Function : Auxiliary servo inputN1 FEFMO4 AnalogI/O Feed motor 4 control. DAC output.
Alternative Function : Auxiliary servo input
BDP-BX38/S280/S380/S383
6-5
upnI golanA NIOF 3B t Input of Focusing Signal (Negative)Alternative Function : Auxiliary servo input
A2 FOIP Analog Input Input of Focusing Signal (Positive)Alternative Function : Auxiliary servo input
K2 FOO Analog Output Focus servo output. PDM output of focus servo compensator.C1 FPDOCD Analog Input Laser Power Monitor Input for CD APC / Differential negative inputD2 FPDODVD Analog Input Laser Power Monitor Input for DVD APC / Differential positive inputN2 FEGAINSW1 Analog Output Read gain switch. 1N3 FEGAINSW2 Analog Output Read gain switch 2.P3 FEGAINSW3 Analog Output Read gain switch 3.
no-rewop ta eerf-ekips si nip ehT .atad ecafretni laires DDLLTTVL V3.30OIGEF 1TI/O, stage. The pin is not allowed to pull-up in circuit layout.5V-tolerance, FE_MUTE12,4,6,8 mAPDR, 75K pulldown
no-rewop ta eerf-ekips si nip ehT .KLC ecafretni laires DDLLTTVL V3.31OIGEF 4PI/O, stage. The pin is not allowed to pull-up in circuit layout.5V-tolerance, FE_MUTE22,4,6,8 mAPDR,75K pulldown
norewop ta eerf-ekips si nip ehT .atad eviecer laires 232SR CPLTTVL V3.301OIGEF6TI/O, stage5V-tolerance, URXD2,4,6,8 mAPDR,75K pull-up
norewop ta eerf-ekips si nip ehT .atad timsnart laires 232SR CPLTTVL V3.311OIGEF 5TI/O, stage.5V-tolerance, UTXD2,4,6,8 mAPDR,75K pull-up
eerf-ekips si nip ehT )KCOLC( .trop tuptuo laires deeps hgiHLTTVL V3.321OIGEF 5RI/O, at power-on stage.5V-tolerance,2,4,6,8 mAPDR,75K pull-up
ta eerf-ekips si nip ehT )ataD( trop tuptuo laires deeps hgiHLTTVL V3.331OIGEF 4VI/O, power-on stage.5V-tolerance, Servo Mon2,4,6,8 mAPDR,75K pull-up
.egats no-rewop ta eerf-ekips si nip ehT .OI lareneGLTTVL V3.32OIGEF 2TI/O, NC5V-tolerance,2,4,6,8 mAPDR,75K pull-up
a eerf-ekips si nip ehT .tuptuO 0 laitinI .tuptuO lortnoC DELLTTVL V3.33OIGEF6P tI/O, power-on stage.5V-tolerance, FE_EJECT2,4,6,8 mAPDR, 75K pulldown
U1 FEGIO4 Analog Output Read/Write gain switch 6
R4 FEGIO5 Analog Output Read/Write gain switch 7MODE B
P5 FEGIO6 Analog Output Read/Write gain switch 8. The pin is not allowed to pull-up incircuit layout.MODE C
si nip ehT .egats no-rewop ta eerf-ekips si nip ehT .OI lareneGLTTVL V3.37OIGEF 2UI/O, not allowed to pull-up in circuit layout.5V-tolerance, LDEN2,4,6,8 mAPDR,75K pulldown
.egats no-rewop ta eerf-ekips si nip ehT OI lareneGLTTVL V3.38OIGEF 3TI/O, NC5V-tolerance,2,4,6,8 mAPDR,75K pull-up
BDP-BX38/S280/S380/S383
6-6
.egats no-rewop ta eerf-ekips si nip ehT .OI lareneGLTTVL V3.39OIGEF 3UI/O, NC5V-tolerance,2,4,6,8 mAPDR,75K pulldown
H6 HAVC Analog Output Decoupling Pin for Reference Voltage of Main and Sub BeamsE1 INA Analog Input Input of Main Beam Signal (A)E2 INB Analog Input Input of Main Beam Signal (B)F1 INC Analog Input Input of Main Beam Signal (C)F2 IND Analog Input Input of Main Beam Signal (D)H3 INE Analog Input Input of Sub-Beam Signal (E)H4 INF Analog Input Input of Sub-Beam Signal (F)G2 ING Analog Input Input of Sub-Beam Signal (G)G1 INH Analog Input Input of Sub-Beam Signal (H)U4 FELIMIT_ 3.3V LVTTL Sledge Inner Limit Input, Active Low. The pin is spike-free at
I/O, power-on stage.5V-tolerance,6 mA, 75K pull-up
M6 FEMPXOUT1 Analog Output Multiplexer Output 1 for Signal Monitoring. The pin is notallowed to pull-up in circuit layout.
M5 FEMPXOUT2 Analog Output Multiplexer Output 2 for Signal Monitoring. The pin is notallowed to pull-up in circuit layout.
N4 FEMPXOUT3 Analog Output Multiplexer Output 3 for Signal Monitoring. The pin is notallowed to pull-up in circuit layout.
P1 FEOSCEN 3.3V LVTTL High frequency modulation enable signal output, or LDD serialI/O, interface CLK or I2C SCL. The pin is spike-free at power-on5V-tolerance, stageSlow slew,2, 4, 6, 8mAPDR,75K pull-up
U6 FEPLAY_ 3.3V LVTTL Play/pause key input, active low. The pin is spike-free atI/O, power-on stage.5V-tolerance,6 mA,75K pull-up
J3 RFIN Analog Input Differential Input of AC Coupling RF SUM Signal (Negative)J2 RFIN2 Analog Input Differential Input of AC Coupling RF SUM Signal (Negative)J4 RFIP Analog Input Differential Input of AC Coupling RF SUM Signal (Positive)J1 RFIP2 Analog Input Differential Input of AC Coupling RF SUM Signal (Positive)L4 TLO Analog Output Tilt servo outputW1 FETRAYIN_ 3.3V LVTTL Tray_is_in Input, A Logical Low Indicates the Tray is IN.
I/O, Feedback Flag is from Tray Connector. The pin is spike-free5V-tolerance, at power-on stage.6 mA,75K pull-up
W2 FETRAYOUT_ 3.3V LVTTL Tray_is_out Input. A Logical Low Indicates the Tray is OUT.I/O, Feedback Flag is from Tray Connector. The pin is spike-free5V-tolerance, at power-on stage.6 mA,75K pull-up
M3 FETRAYPWM Analog Output Tray DAC / PWM control output. Controlled by μP.F4 TRINA Analog Input Input of Tracking Signal (A)G3 TRINB Analog Input Input of Tracking Signal (B)G4 TRINC Analog Input Input of Tracking Signal (C)G5 TRIND Analog Input Input of Tracking Signal (D)K1 TRO Analog Output Tracking servo output. PDM output of tracking servo compensator.K6 V14 Analog Output Output of Voltage Reference (1.4V)D1 VDAC0 Analog Output Output of General DACG6 FVREF Analog Output Output of Voltage ReferenceC2 VRDCO Analog Output Output Voltage of Laser Diode Control in APCE3 VWDC1O Analog Output Output Voltage 1 of Laser Diode Control in APCA1 VWDC2O Analog Output Output Voltage 2 of Laser Diode Control in APCB1 VWDC3O Analog Output Output Voltage 3 of Laser Diode Control in APC
BDP-BX38/S280/S380/S383
6-7E
Main function
Enter Service Mode
[OPTION 1]The set disconnect AC, and Push front panel key ([OPEN/CLOSE] + [PLAY] + [STOP]) and AC INThe keys will be released if the character of "SERVICE" displays on a front panel display.After that, the screen in service mode is displayed on a monitor.Control via Remote Controller
[OPTION 2]Connect the set to AC, and wait initialization cycle complete (FLD will show “wait.. Wait..” for about 10s)
Use Sony BDP remote controller, key in the following SIRCS code.[DISPLAY] -> [ 0 ] -> [ 2 ] -> [ 1 ] -> [SUBTITLE] While sending of SIRCS code, wait time between each key code could not send later then 3 second.If 3 second waiting is exceeded user have to re-key in the SIRCS code.If SIRCS enter is successful, set will auto boot up and FLD will display SERVICE. The screen of service mode is displayed on a monitor. Control via Remote Controller
SECTION 7SERVICE M
ODEVICE M
ODE
7-1
BX38/S280/S380/S383
Main function
DiagThe unit test of the device mounted on the MainBoard.The unit test of the device mounted on the wireless board. (only wireless model)
Display Error LogError log is displayed.The displayed logs can be saved in a USB memory.
Factory InitializeReturn all of the player setting to their factory defaults.
NetworkConfirm Wired Network connection.
Version UpThe set updates by Update DISC.
System InformationSystem information of the set is displayed. The Information on a soft version and drive information, etc. is displayed.
EMC Test ModeNot used.
DriveWrite Drive OP Data and check drive.
7-2
BX38/S280/S380/S383
Menu
*Service Mode Menu[1]Diag[2]Log[3]Factory Initialize[4]Network[5]Version Up[6]System Information[7]EMC Test Mode[8]Drive
*Service Mode Menu[1]Diag[2]Log[3]Factory Initialize[4]Network[5]Version Up[6]System Information[7]EMC Test Mode[8]Drive
Version Up・DISC updateVersion Up・DISC update
Drive・Write Drive OP Data and check driveDrive・Write Drive OP Data and check drive
*Factory Initialize・ Initialize default setting*Factory Initialize・ Initialize default setting
*Logview Error Log*Logview Error Log Error Log
・view Error logError Log・view Error log
*Diag・Diag Test*Diag・Diag Test
*Network・Network diagnosis for wired*Network・Network diagnosis for wired
Ping・confirm Network connectionPing・confirm Network connection
Ifconfig・view Network StatusIfconfig・view Network Status
Device Test・USB/DAC/IFCon/ testDevice Test・USB/DAC/IFCon/ test
Video Test・Video Output TestVideo Test・Video Output Test
Audio Test・Audio Output TestAudio Test・Audio Output Test
Wireless LAN Test・ only wireless model usedWireless LAN Test・ only wireless model used
Audio input Test・Not usedAudio input Test・Not used
Start Initialize・Initialize default setting for BD-PlayerStart Initialize・Initialize default setting for BD-Player
System Information・display System InformationSystem Information・display System Information
EMC Test Mode・Not usedEMC Test Mode・Not used
Mic Test・ Only Karaoke model usedMic Test・ Only Karaoke model used
HDMI Input test・Not usedHDMI Input test・Not used
Start Update for BDV・Not usedStart Update for BDV・Not used
Start Update for BDP・Start disc upgrade for BDPStart Update for BDP・Start disc upgrade for BDP
7-3
BX38/S280/S380/S383
Service Mode Menu
*Service Mode Menu
[1] Diag[2] Log[3] Factory Initialize[4] Network[5] Version Up[6] System Information[7] EMC Test Mode[8] Drive
HELP : [DOWN][ENT][(NUM)]
Outline:Service Mode Top MenuIt selects to each function from here.output HDMI/Component 480p forcibly.
Operation:[1] Select and Activate Diag Menu.[2] Select and Activate Log Menu,[3] Select and Activate Factory Initialize Menu.,[4] Select and Activate Network Menu[5] Select and Activate Version Up (DISC version Up) Menu,[6] Select and Activate System Information Menu.[7] Select and Activate EMC Test Mode Menu. (not Used)[8] Select and Activate Drive Menu.[UP] Move Up cursor[DOWN] Move Down cursor[ENT] Activate the selected cursor.
*The cursor is not displayed when initial.
Front Panel Display:If cursor or arbitrary menu keys are operated, the character will output to a front panel display, respectively.
*the character string.initial display SERVICEDiag: S-DIAGLog: S-LOG
TINIF-S:ezilaitinIyrotcaFTEN-S:krowteNPUV-SpU noisreV
System Information: S-INFOCME-S:edoM tseT CMEVRD-S:evirD
Display Hint(The key in which the present use is possible)
[1] Diag
7-4
BX38/S280/S380/S383
DiagMenu (Device Test)
Outline:The device carried in the substrate is tested.
(Window 1) Select test categoryOperation:[LEFT] [RIGHT] Select Category[DOWN][ENT] Activate the selected Category.[RET] Return to Service Top Menu.
(Window 2) Device TestAfter “Device Test” selects in window 1, the device to test is chosen.
Operation:[LEFT][RIGHT] Select Device[ENT] Activate and Start Test[UP] Return to test category selection.
IF select IFCON, Move Up cursor. (see windows 3)[DOWN] IF select IFCON, Move Up cursor. (see windows 3)[RET] Return to test category selection.
>Test category listDevice TestVideo TestAudio TestAudio Input Test (not Used)Wireless LAN Test (only Wireless Model)Mic Test (only Karaoke Model)HDMI Input Test (not Used)
>Device Test :Device ListUSB Host :USB Media Check (Front and Rear)
Only one time.D/A Converter :DAC write check (non-verification)IFCON :IFCON Test (see windows 3)
FDP all ONShow StringsLED SequentialFAN Control ON Fan State (Display)
)4 wodniw ees( kcehc tcennoc CIM :CIM kcehc DI eciveD :CPI (only S780) kcehc noisiveR :IMDH lanretxE (only S780)
(window 1)* Diag
Category:
(Window 2)* Diag
Category: Device TestDevice:
Rear USB Media check ... OKFront USB Media check ... OK
Checking...
HELP: [RIGHT][UP][ENT][RET]
USB Host
Device Test
(Window 3)* Diag
Category: Device TestDevice: IFCON
FDP all ONShow stringsLED Sequential ONFan Control ON
FanState:OFF
HELP: [LEFT][RIGHT][UP][DOWN][ENT][RET]
IFCON
(Window 4)* Diag
Category: Device TestDevice: MIC
Mic connect check ... OK
Checking...
HELP: [RIGHT][UP][ENT][RET]
7-5
BX38/S280/S380/S383
Diag Menu (Device Test) (additional)
Front Panel Display:
Device Select: USB : D-MICD/A Converter : D-DACIFCON : D-IFCONMIC : D-MICIPC : D-IPCExternal HDMI : D-EXH
OEDIV-D :: tseT oediV
OIDUA-D :: tseT oiduA
NALLW-D :tseT NAL sseleriWHwInfo : D-WLIFAP Connect : D-CNAPRSSI Value : D-RSSIPing Test : D-PING
MIC connect check: :MIC CHKall the items O.K. :MIC OKExcept the above :MIC NG
IPC Device ID check: :IPC CHKall the items O.K. :IPC OKExcept the above :IPC NG
External HDMI Revision check: :EXH CHKall the items O.K. :EXH OKExcept the above :EXH NG
7-6
BX38/S280/S380/S383
DiagMenu (Video Test/ Audio Test)
Outline:Activate Video Test and Audio Test
(Window 1)Select Video Test Category Operation:[ENT] Activate and display Color Bar [UP][RET] Return to test category selection.
(Window 2)Display Color BarOperation:[ENT] Return to Select Video Test Category.
(Window3 ) Select Audio Test CategoryOperation:[ENT] Play TONE Sound/Stop[UP][RET] Return to Select Audio Test Category
>Video Test:Color Bar output S terminal & composite & Component & HDMI.
>Audio Test;TONE sound output ineOut(2ch)&/ SPDIF & HDMI.
(Window 1)* Diag
Category: Video Test
HELP: [UP][ENT][RET]
(Window 3)* Diag
Category: Audio Test
HELP: [UP][ENT][RET]
[ENT] Show Color Bar
[ENT] Generate TONE Sound
(Window 2)
[ENT]
[ENT]
7-7
BX38/S280/S380/S383
9
Diag Menu (Wireless LAN Test) <only Wireless Model>
Outline:Activate Wireless LAN Tests(Window 1)Select Wireless LAN Test Category Operation:[LEFT] [RIGHT] Select Category[DOWN][ENT] Activate the selected Category.[RET] Return to Service Top Menu.(Window 2) Select Wireless LAN TestOperation:[1] Show Wireless LAN module Information[2] Connect Access Point[3] Start display RSSI value.[4] Start Ping Test[UP][DOWN] Select Test[ENT] Activate and Start Test[RET] Return to test category selection.
> Show WLAN HwInfo (See Window 2)Serial : Serial NumberHard : Hardware VersionMac : Mac Address
> Connect to Access Point (See Window 3)Connect Access Point only with the following AP settings. Authentication method: NO-ENCRYPTWEP key: abcdef1234SSID: SONY-Test-RPMK: ABCDE12345IP: 192.168.1.10Net mask: 255.255.255.0Broadcast: 192.168.1.255
・When connect to AP, Status is “Connected!”When cannot connect to AP, Status is “can’t Connect!”
> Start Display RSSI Value (See Window 4)Display RSSI value.
> Start Ping Test (See Window 5)Ping Test.IP address use the value of “192.168.1.10”.
(Window 1)* DiagCategory: Wireless LAN Test
HELP: [(NUM)][RET]
(Window 2)* Diag
Category: Wireless LAN Test[1] Show WLAN HwInfo[2] Connect to AccessPoint[3] Start Display RSSI Value[4] Start Ping Test
Serial: 200912313165535Hard : 0x04Mac : 00:01:36:23:FD:CF
HELP: [(NUM)][RET]
(Window 3)* Diag
Category: WirelessLAN Test[1] Show WLAN HwInfo[2] Connect to AccessPoint[3] Start Display RSSI Value
CERT : NO-ENCRYPTWEPKEY : abcdef1234PMK : ABCDE12345SSID : SONY-Test-RIPADDR : 192.168.1.10NETMASK: 255.255.255.0BCADDR : 192.168.1.255
Status : Connected!HELP: [(NUM)][RET]
(Window 4)* DiagCategory: Wireless LAN Test[1] Show WLAN HwInfo[2] Connect to AccessPoint[3] Stop Display RSSI Value[4] Start Ping Test
RSSI Value : 60
HELP: [(NUM)][RET]
(Window 5)* Diag
Category: Wireless LAN Test[1] Show WLAN HwInfo[2] Connect to AccessPoint[3] Stop Display RSSI Value[4] Start Ping Test
Ping To : 192.168.1.10PING 192.168.1.10 OK!
HELP: [(NUM)][RET]
7-8
BX38/S280/S380/S383
Diag Menu (MIC Input Test) <only Karaoke Model>
Outline:Activate MIC Input Test
(Window1 ) Select MIC Input Test CategoryOperation:[LEFT] [RIGHT] Select Category[DOWN][ENT] Activate the selected Category.[RET] Return to Service Top Menu.
(Window 2) Select Input DeviceAfter “MIC Input Test” selects in window 1, the device to test is chosen.
Operation:[ENT] Activate and Start Test/Stop[RET] Return to test category selection.
>Audio Input Test:Path test from MIC to LineOut(2ch)/ SPDIF/HDMI and Line Out (8ch) through 8555.Check tone sound by speaker.
Front Panel Display:MIC Input Test Select: D-MIC
(Window 1)* Diag
Category: MIC Input Test
HELP: [LEFT][RIGHT][UP][DOWN][ENT][RET]
(Window 2)* Diag
Category: MIC Input Test
HELP: [ENT][RET]
Start
[ENT] Start Input Sound
(Window 2)* Diag
Category: Audio Input Test
HELP: [ENT][RET]
Stop
[ENT] Stop Input Sound
[ENT]
[ENT]
7-9
BX38/S280/S380/S383
Log: Error Log
(Window 1)* Select Log
HELP : [DOWN][ENT][(NUM)]
Outline:Display each contents of the Error log,
(Window 1) select log.Operation:[1] Activate and Display Error log[UP] Move Up cursor[DOWN] Move Down cursor[ENT] Activate the selected cursor.[RET] Return to Service Top Menu.
(Window 2):Display Error LogOperation:[LEFT] Next Page[RIGHT] Previous Page[RET] Return to select log (window 1)[RED] Write the contents of an error log on a USB memory.
Front Panel Display:select log Error Log: S-ELOGDisplay Page display page ex) 001/050
>Log contentsError Log:
08/01/01 00:53:19: [ErrCode:080400000000][Date] [Time] [ErrCode]
**Write the contents of a log on a USB memory**[RED] is pushed where a USB memory is inserted in a set in log display screen.
Please do not push the RED button immediately after USB memory is inserted. Please do not pull out USB memory immediately after the RED button was pushed.
Error Log:“getErrLogFile.trm” file is outputted in a USB memory.
(Window 2)* Error Log
08/01/01 00:53:19: [ErrCode:090200023A00]08/01/01 00:53:45: [ErrCode:090200023A00]08/01/01 00:54:00: [ErrCode:090200023A00]
::
[1] Error Log
7-10
BX38/S280/S380/S383
Factory Initialize
(Window 1)* Factory Initialize
[RET] Return to Top Menu
Outline:Return all of the player setting to their factory defaults.
(Window 1) select initialize.Operation:When you return a set to the factory defaults, push [1] on this screen.[ENT] Start Factory Initialize[RET] Return to Service Top Menu.
(Window 2)It is a screen of the end of initialization.[RET] Return to Service Top Menu.
Please disconnect AC power supply, and connect AC again. - The operation of other service mode menu can be continued.
Front Panel Display:Initialize : SETTINGInitialize OK: INIT-OK (window 2)Initialize NG: INIT-NG
(Window 2)* Factory Initialize
Reboot to complete.
[RET] Return to Top Menu
HELP : [RET]
[ENT] Start Initialize
7-11
BX38/S280/S380/S383
Network (Network Test: Ifconfig)
(Window 1)* Network
Test: Ping
Outline:Network Menu for the wired Ethernet.
(Window1)Ifconfig Test Operation:[ENT] Activate Ifconfig(Display network setting)[RIGHT] Select Ping Test.[RET] Return to Service Top Menu.
(Window 2)Ping TestOperation:[LEFT] Select Ifconfig Test.[RET] Return to Service Top Menu.(The details of a Ping test are nest page)
(Window 3)Ifconfig Test ActiveDisplay Ifconfig command results.Operation:[ENT] Ifconfig retry [RIGHT] Select Ping Test.[RET] Return to Service Top Menu.
Front Panel Display:S-NET
(Window 2)* Network
Test: IfconfigPing To :
[START]Ping To :
Ping
Ifconfig
(Window 3)* Network
Test: Ping
IP 192.168.11.2 MAC 00-16-01-85-21-A3
HELP: [ENT]:Re/Exe [RIGHT]
Ifconfig
7-12
BX38/S280/S380/S383
Network (Network Test: Ping)
Outline:Ping Test for the wired Ethernet.
(Window 1)Ping TestOperation:[LEFT] Select Ifconfig Test.[DOWN] Ping execution preparation.[RET] Return to Service Top Menu.
(Window 2) The IP address of the Ping point is set up.(IP address input mode)
When “Ping to :>” is reversed, [ENT] is pushed and IP is inputted.Operation:[ENT] Finish to input.[RET] Finish to input.[LEFT] Finish to input and Select Ifconfig Test.[(NUM)] Input Character sting ‘0-9’[TIME] Input Character sting ’.’[CLEAR] Backspace
(Windows3): Ping Test ActiveWhen [START] is reversed, [ENT] is pushed and execute ping .Operation:[ENT] Activate Ping Test [UP] The IP address of the Ping point is set up.[RET] Return to Service Top Menu.
Front Panel Display:S-NET
(Window 1)* Network
Test: IfconfigPing To :
[START]Ping To :
Ping
(Window 2)* Network
Test: IfconfigPing To :
[ENT] : Release[RET] : Release[LEFT] : Ifconfig Test[(NUM)]: ‘0-9’[TIME] : ‘.’[CLEAR]: Backspace
Ping To :> 192.168.200.13
Ping
(Window 3)* Network
Test: IfconfigPing To : 192.168.200.13
PING 192.168.200.13 OK!
[HELP]: [ENT]:Start [UP][LEFT]
Ping
[START]
7-13
BX38/S280/S380/S383
7-14
BX38/S280/S380/S383
Version Up (using Update DISC)
(Window 1)* Version Update
[1] Start Update for BDP[2] Start Update for BDV
[RET] Return to Top Menu
HELP : [ENT][RET][(NUM)]
Outline:update software using DISC
(Window 1)Version Up MenuOperation:[1] Start Update for BDP →(Tray Open and go to window 2)[2] Start Update for BDV (not used)[UP] Move Up cursor[DOWN] Move Down cursor[ENT] Activate the selected cursor.[RET] Return to Service Top Menu.
(Window 2)Place the Update DiscOperation:[ENT] Tray Close and check DISC.[RET] Cancel Update (Tray Close and return to window 1)
(Window 3) Disc Check and OK (Right DISC)Operation: start update sequence automatically and reboot.
After reboot, please open tray and eject Update Disc manually.
(Window 4) Disc Check and NG (not update DISC)Operation: [Error] ・・・(error message) and wait.
open tray automatically.
Front Panel Display:DISC Insert V-INSCDCan’t Mount V-NODSCDISC Check NG V-CHKNGDISC Check OK V-CHKOK
(Window 2)* Version Update
Insert update DISC ...
[ENT] Tray Close and Check start[RET] Cancel
HELP: [ENT][RET]
(Window 3)* Version Update
Now, mounting and checking... OK
(Window 4)* Version Update
Insert update DISC ...
[ENT] Tray Close and Check start
[RET] Cancel
[Error] Cannot mount this DISC!
HELP: [ENT][RET]
System Information
Outline:Display System Information
(Window 1)Basic Information MenuOperation:[RIGHT] Drive Information (delta IOP of a drive is measured ) and
Wireless device Information (only wireless model)displayed. (go to window 2)
[RET] Return to Service Top Menu.
(Window 2)Drive and Wireless Information MenuOperation:[LEFT] Basic Information displayed. (go to window 1)[RET] Return to Service Top Menu.
When delta IOP is measured, it becomes impossible to use the Version Up function.
Contents List: ModelDestinationSequence NumberMACIPIFCON IFCON VersionBootloader Bootloader VersionHost Main Host Main VersionHost Sub Host Sub VersionMiddleware Middleware Version
WLAN module Serial (only wireless model)WLAN module hw version (only wireless model)WLAN module MAC Address (only wireless model)Drive Firm RevisionCD DIOP Delta IOPDVD DIOP Delta IOPBD DIOP Delta IOPCD LD TIME LD Time DVD LD TIME LD Time BD LD TIME LD Time
Front Panel Display:Display Host Main Version
(Window 1)* System Information
Model : BDP6G-A1Destination : USSequence Number : *********Mac : 00-1a-80-d0-47-65IP : 192.168.102.32IF–con Block0 version;0x86, Block1 version:0x0*
Bootloader version:**Host Main version:M03.R.***Host Sub version:2009******Middleware version:****
HELP: [RET][RIGHT]
(Window 2)* System Information
WLAN module Serial:201011300000335WLAN module hw version:04WLAN module MAC Address:00:1a:80:d0:47:65Drive Firm Version: FG1910CD DIOP:0x****DVD DIOP:0x****BD DIOP:0x****CD LD TIME 0x****************DVD LD TIME 0x****************BD LD TIME 0x****************
HELP: [RET][LEFT]
7-15
BX38/S280/S380/S383
Drive Test
Outline:Activate Drive test
(Window 1) Select Drive test categoryOperation:[LEFT] [RIGHT] Select Category[DOWN][ENT] Activate the selected Category.[RET] Return to Service Top Menu.[1] Drive OP data Write[2] Servo Parameter Check Menu (Not Used)[3] Servo Signal Check Menu (Not Used)[4] S-Curve Check Menu (Not Used)[5] Readability Check Menu (Not Used)[6] OP Position Check Menu (Not Used)[7] OP Check Menu (Not Used)[8] Load Eject Aging (Not Used)[9] Spindle Control Check Menu (Not Used)[10] FA Test Mode (Not Used)
(Window 2) To start OP data WriteOperation :[ENT] Start
(Window 3) Show OP data Write resultOperation :
NG - USB is not findNG – File(Budata.txt) is not findOK – OP data write
>Drive Test:For drive operating check. Service is only use Drive OP data write to re writeOP data after change of new OPU.
(window 1)* Diag
[1] Drive OP data Write[2] Servo Parameter Check Menu[3] Servo Signal Check Menu[4] S-Curve Check Menu[5] Readability Check Menu[6] OP Position Check Menu[7] OP Check Menu[8] Load Eject Aging[9] Spindle Control Check Menu[10] FA Test Mode
Help: [UP][DOWN][ENT][RET][(NUM)]
(Window 2)* Drive OP data Write
Insert USB StorageDevice . . . Remove DISC and Close tray.
[ENT] Start
HELP: ENT][RET]
(Window 3)* Drive OP data Write
Insert USB StorageDevice . . . Remove DISC and Close tray.
[ENT] Start
NG – USB is not findNG – File(Budata.txt) is not findOK – OP data write
HELP: ENT][RET]
7-16E
BX38/S280/S380/S383
Erro
r Lo
g In
form
atio
n
Cate
gory
Err
orC
ode
Err
orInfo
_0Err
orInfo
_1Err
orInfo
_2Err
orInfo
_3
CXD
9997/C
XD
9988 E
rror
0x01 2
0x
0r
orrE
3R
DD Ifcon t
ransm
itio
n t
ime o
ut
0x03
0x01
0x00
0x00
0x00
0x00
No r
esponse f
rom
Ifc
on
30
x0
rorr
E n
ocfI
Oth
er
Err
or
NA
ND
Init F
ail
0x04
0x00
0x00
0x00
0x00
0x00
NA
ND
initia
liza
tion f
ailed
NA
ND
Fla
sh r
ead E
rror
0x04
Oth
er
Err
or
evir
d la
citp
o tc
ete
d to
nn
aC
10
x0
60
x0
rorr
E E
VIR
D
det
ce
nn
oc
sid
elb
ac
AT
AS
20
x0
60
x0
rorr
E E
VIR
D
RO
RR
E FI
AT
AS
30
x0
60
x0
rorr
E E
VIR
D
60
x0
rorr
E E
VIR
DO
ther
Err
or
hgi
h o
ot si
erut
are
pm
eT
00
x0
00
x0
00
x0
10
x0
10
x0
70
x0
rorr
e n
aF
etat
s n
af e
gn
ah
c to
n n
aC
00
x0
00
x0
00
x0
20
x0
10
x0
70
x0
rorr
e n
aF
rre
noit
azil
aitini
elu
do
m0
0x
00
0x
00
0x
00
0x
01
0x
08
0x
0r
orrE t
enr
eht
Eor
rorr
E k
niL
00
x0
00
x0
00
x0
00
x0
20
x0
80
x0
rorr
E te
nre
htE
rorr
e d
aer
csi
D1
0x
09
0x
0C
SID
LA
CIT
PO
- AI
DE
M
rorr
e d
aer
sd
na
mm
oc r
eht
Od
mC
20
x0
90
x0
CSI
D L
ACI
TP
O -
AID
EM U
SB
media
read e
rror
0x0A
0x01
0x1
0x1
0x00
0x00
Err
orInfo
_0: LU
N n
um
ber
Err
orInfo
_1: LB
A a
ddre
ss
USB
media
write
err
or
0x0A
0x02
0x1
0x1
0x00
0x00
Err
orInfo
_0: LU
N n
um
ber
Err
orInfo
_1: LB
A a
ddre
ss
Unsupport
ed U
SB
devic
e0x0A
0xFF
0x1
0x1
0x1
0x1
Err
orInfo
_0: D
evic
e C
lass
Err
orInfo
_1: bD
evic
eSubC
lass
Err
orInfo
_2: bD
evic
ePro
tocol
Err
orInfo
_3: bN
um
Configura
tions
A0
x0
rorr
e B
SU
Oth
er
Err
or
0x**
issue
Err
or
LogC
ode
note
Read E
rror
LB
A
0x**
0x**
0x**
0x**
0x**
Err
or
Sense K
ey
Err
or
Code
Err
or
Code
SC
R D
iag F
ield
(Sim
ultaneous e
rror)
BDP-BX38/S280/S380/S383
8-1
SECTION 8ERROR LOG LIST
History
Update for 6G item
Manaka/Kong
2010.09.30
ver0.20
Update error log table
Manaka/Kong
2010.12.01
Ver0.30
First release
Manaka/Kong
2010.09.08
ver 0.10
BDP-BX38/S280/S380/S383
8-2E
9-1
SECTION 9TROUBLESHOOTING
Main Flow ............................................................................... 9-2Power (System) Flow ............................................................. 9-3IFcon Section Flow Chart (1/2) ............................................... 9-4IFcon Section Flow Chart (2/2) ............................................... 9-5Audio section flowchart........................................................... 9-6Video section flowchart ........................................................... 9-7FL-203 Board flowchart ......................................................... 9-8IF-170 Board flowchart ......................................................... 9-9
Drive flowchart ........................................................................ 9-12Ethernet flowchart................................................................... 9-13USB (Front) Device Flow........................................................ 9-14USB (Rear) Device Flow......................................................... 9-15E
Remote does not operate....................................................... 9-10
BDP-BX38/S280/S380/S383
White LED .............................................................................. 9-11
9-2
Mai
n Fl
owch
art
No
No
Yes
Yes
No
Yes
No
Yes
No
Yes
No
No
No
Yes
Yes
Yes
No
Yes
Yes
No
Yes
No
No
Yes
Yes
No
Yes
Pow
er O
N b
y po
wer
sw
itch
on fr
ont o
r rem
ote
cont
rol.
Has
sys
tem
rese
t (C
PU
_XR
ST)
bee
nca
ncel
led?
Mea
sure
men
t poi
nt J
L112
2
To V
ideo
sec
tion
flow
char
t
To IF
con
sect
ion
flow
char
t
Sta
rt (a
nd re
turn
from
eac
h flo
wch
art)
App
roxi
mat
ely
10 s
econ
ds a
fter t
he A
C is
appl
ied,
the
WA
IT d
ispl
ay fl
ashe
s se
vera
ltim
es a
nd th
e po
wer
is tu
rned
OFF
auto
mat
ical
ly.
Are
the
pow
er s
uppl
y vo
ltage
s on
the
MB
boar
d no
rmal
?To
Pow
er S
uppl
y (S
yste
m) f
low
char
t.
EN
D
Rep
lace
the
MB
boa
rd.
To D
rive
flow
char
tB
U A
djus
tmen
t Flo
w [y
y] ~
Afte
r BU
/MB
Rep
lace
men
t ~
To D
rive
flow
char
t
To F
L/FR
boa
rd fl
owch
art
Che
ck th
e pa
rts a
nd m
ount
ing
arou
nd X
401.
Rep
lace
the
MB
boa
rd.
To D
rive
flow
char
tB
U A
djus
tmen
t Flo
w [y
y] ~
Afte
r BU
/MB
Rep
lace
men
t ~
Is O
PE
N o
r CLO
SE
dis
play
ed o
n th
eflu
ores
cent
tube
?
Is th
ere
any
prob
lem
in th
e FF
C c
onne
ctio
n to
CN
2470
whi
ch c
onne
cts
the
driv
es?
To F
R b
oard
flow
char
t
Is X
MB
or t
he S
ETU
P s
cree
n di
spla
yed
on th
evi
deo
outp
ut s
cree
n?
Do
the
up,
dow
n, le
ft, a
nd ri
ght a
rrow
key
s of
the
rem
ote
cont
rol p
erm
it op
erat
ions
on
the
XM
B?
Is th
e m
ain
cloc
k (X
401)
osc
illat
ing
prop
erly
at
27 M
Hz?
Che
ck th
e fle
xibl
e ca
ble
of th
e dr
ive.
Are
CN
2470
,CN
2462
or
CN
1401
disc
onne
cted
?
Che
ck th
e co
nnec
tions
of t
he c
onne
ctor
s.If
ther
e is
no
impr
ovem
ent,
repl
ace
the
MB
boar
d.To
Driv
e flo
wch
art
BU
Adj
ustm
ent F
low
[yy]
~ A
fter B
U/M
BR
epla
cem
ent ~
SY
S E
RR
dis
play
app
ears
on
fluor
esce
nt tu
be.
To D
rive
flow
char
t
Is th
e so
und
repr
oduc
ed p
rope
rly w
hen
a B
D,
DV
D, o
r oth
er d
isc
is p
laye
d?To
Aud
io s
ectio
n flo
wch
art
Is th
e pi
ctur
e re
prod
uced
pro
perly
whe
n a
BD
,D
VD
, or o
ther
dis
c is
pla
yed?
To V
ideo
sec
tion
flow
char
t
Are
BD
, DV
D, o
r oth
er d
iscs
that
are
load
ed o
nth
e dr
ive
reco
gniz
ed c
orre
ctly
?
BDP-BX38/S280/S380/S383
9-3
Powe
r (Sy
stem
) Flo
w AC IN
Che
ck th
e ou
tput
vol
tage
s fro
m th
e po
wer
supp
ly b
lock
.C
N20
1 pi
n 1:
+12
V (U
NSW
12V)
CN
201
pin
2: +
12V
(UN
SW12
V)
CN
201
pin
3: +
12V
(FE_
UN
SW12
V)- -
No
Yes
Che
ck th
e fu
ses
Hav
e an
y of
the
belo
w fu
ses
blow
n?N
o
MB
boar
d: P
S301
, PS3
02PS
1201
-
Yes
Che
ck th
e fo
llowi
ng p
ower
con
trol s
igna
ls
while
the
powe
r is
ON
PCO
NT_
CO
RE:
MB
boar
d R
327
PCO
NT2
: MB
boar
d R1
236
PCO
NT3
: MB
boar
d R
305,
R30
7,R
309,
R34
3AT
A_PC
ON
T: M
B bo
ard
R37
6
No
Yes
Che
ck th
e vo
ltage
s ba
sed
on th
e sc
hem
atic
di
agra
mN
oVo
ltage
line
s th
at a
re n
ot o
utpu
t are
sho
rted
to G
ND
No
Failu
re o
f pow
er s
uppl
y IC
-> R
epla
ce th
e IC
Rep
lace
the
MB
boar
d if
ther
e is
no
impr
ovem
ent
Che
ck th
at th
e ha
rnes
s ha
s be
en in
serte
d pr
oper
ly. I
f the
re is
no
prob
lem
, rep
lace
the
powe
r sup
ply
bloc
k.
Repl
ace
blow
n fu
ses
Repl
ace
the
MB
boar
d if
ther
e is
no
impr
ovem
ent
To IF
con
sect
ion
Flow
BDP-BX38/S280/S380/S383
IFco
n Se
ctio
n Fl
ow C
hart(
1/2)
IFco
n bl
ock
p ow
er s
uppl
y ch
eck
UN
SW3.
3V v
olta
ge (+
3.3V
)Is
3.3
V ou
tput
from
IC30
1 pi
n4?
No
Inpu
t vol
tage
Is +
3.8V
inpu
t to
IC30
1 pi
n5?
No
No
Inpu
t vol
tage
Is +
11.8
V in
put t
o IC
302
pin2
?
Yes
Y
es
Yes
Rep
lace
IC30
1If
sym
ptom
s do
not
impr
ove,
che
ck fo
r a
shor
t on
the
circ
uit b
oard
REG
con
trol v
olta
geIs
+3.
8V in
put t
o IC
301
pin1
?N
oR
epla
ce R
304
If th
e sy
mto
ms,
repl
ace
IC30
1
Y
es
Rep
lace
IC30
1
P_FA
IL d
etec
tion
oper
atio
n ch
eck
Che
ck th
e P_
FAIL
vol
tage
No
No
Is +
3.3V
out
put f
rom
IC12
04 p
in2?
Yes
Mai
n un
it
k
key
chec
k
h k
Che
ck o
f key
vol
tage
from
mai
n un
it Ke
y Ta
ble
(*) w
hen
key
is p
ress
ed o
r not
pre
ssed
No
No
POW
ER: C
N12
03 p
in1(
JL12
69) K
EY0
STO
P: C
N12
04 p
in21
(JL1
233)
KEY
1O
PEN
/CLO
SE: C
N12
04 p
in22
(JL1
232)
KEY2
PLAY
: CN
1204
pin
23(J
L123
1) K
EY3
Yes
Rem
ote
cont
rol o
pera
tion
chec
kC
heck
the
wave
form
whe
n th
e re
mot
e co
ntro
l but
ton
is n
ot p
ress
edN
oC
heck
whe
ther
the
FFC
is d
isco
nnec
ted
from
CN
1204
. (O
ther
than
the
POW
ER k
ey)
No
Che
ck o
f the
3.3
V vo
ltage
CN
1204
pin
19 a
nd IC
1203
pin
31
Yes
Che
ck o
f the
wav
efor
m w
hen
the
key
is
pres
sed
In c
ompa
rison
with
a n
orm
al w
avef
orm
, is
the
wave
form
of t
he v
olta
ge o
utpu
t tl
?
No
Is th
e re
mot
e co
ntro
l tha
t is
used
in th
e in
spec
tion
brok
en?
No
Doe
s re
plac
emen
t of t
he
IF b
oard
resu
lt in
im
prov
emen
t?N
o
Y
esC
heck
whe
ther
the
FFC
is d
isco
nnec
ted
from
CN
1204
.
Yes
Rep
lace
R12
64 a
nd c
heck
for +
3.3V
at
IC12
04 p
in1
If sy
mpt
oms
do n
ot im
prov
e, re
plac
e IC
1204
(P
_FAI
L de
tect
ion)
* K e
y Ta
ble
Inpu
t(K
EY0)
(KEY
1)
2.90
-
0.00
-
Key_
OFF
POW
ER
Key_
OFF
S TO
PO
PEN
/CLO
SE
(KEY
2)(K
EY3)
Key_
OFF
Key_
OFF
P LAY
BTo
IF b
oard
Flo
w
BDP-BX38/S280/S380/S383/
9-4
Is th
ere
volta
ge o
f abo
ut 3
.3V
at p
in 2
1,22
and
23 o
f CN
1204
and
pin
1 o
f CN
1206
w
ithou
t pre
ssin
g th
e ke
ys?
Is th
ere
a pr
oble
m w
ith th
e m
ount
ing
cond
ition
of R
B120
1,R
B120
2,C
1213
,C12
14,
C12
15 a
nd C
1216
? Ye
s
Rep
lace
RB1
201,
RB1
202,
C12
13,C
1214
,C
1215
and
C12
16. I
f the
sym
ptom
s do
not
impr
ove,
repl
ace
IC20
3 or
MB
boar
d
Ye
s
DC
DC
4V v
olta
ge (+
3.8V
)Is
3.8
V ou
tput
from
IC30
2 pi
n 3?
Doe
s re
plac
emen
t of
the
IF b
oard
resu
lt in
impr
ovem
ent?
No
Y
es
To IF
boa
rd F
low
If th
e FF
C fr
om C
N12
04
disc
onne
cted
?(o
ther
than
PO
WER
KEY
)?
Is th
e ha
rnes
s fro
m C
N12
03di
scon
nect
ed?
(PO
WER
KEY
)
No
Yes
Rep
lace
R30
2If
the
sym
tom
s do
not
impr
ove,
repl
ace
IC30
2
Is th
e fu
se (P
S301
) blo
wn?
Rep
lace
PS3
01if
the
sym
ptom
s do
not
impr
ove,
chec
k fo
r a
shor
t on
the
circ
uit
No
To Po
wer
Sup
ply
(Sys
tem
)
ppp
yo
EN c
ontro
l vol
tage
Is +
11.8
V in
put t
o IC
302
pin2
?N
oN
Y
es
Repl
ace
IC30
2
A
IFco
n Se
ctio
n Fl
ow C
hart(
2/2)
Chec
k of
IFco
n re
set i
n put
por
t
Is th
e vo
ltage
of I
C12
03 "
H"(3
.3V)
?N
oIs
ther
e a
prob
lem
with
the
mou
ntin
g co
nditio
n of
R12
12, C
1221
or R
1208
?Ye
s
Yes
Pcon
t out
put p
ort c
hec k
Che
ck o
f eac
h po
wer s
uppl
y co
ntro
l por
t wh
en th
e po
wer i
s O
N* C
orre
spon
ding
out
put
IC12
03 p
in15
PC
ON
T1IC
1203
pin
17P
CO
NT2
IC12
03 p
in21
PC
ON
T3
IC12
03 p
in23
PC
ON
T_C
OR
E
IC12
03 p
in24
ATA
_PC
ON
T1
SW3.
3V a
nd S
ATA_
1.2V
A ou
tput
CO
RE_
1.1V
out
put
DD
R2_
1.8V
sys
tem
out
put
DC
SW5V
FE_S
W5V
No
Che
ck fo
r sho
rts a
t eac
h po
rtN
oAl
l the
por
ts g
o "H
" with
in 2
to 1
0 m
s, b
ut
soon
go
"L"
No
Do
the
sym
ptom
s im
prov
e af
ter c
heck
ing
the
sold
erin
g an
d pa
ttern
of I
C12
03?
No
Pow
er s
uppl
y ou
tput
che
ck
Che
ck th
e ou
tput
of t
he c
orre
spon
ding
vo
ltage
SW3.
3V S
hort
circ
uit o
pera
tion
chec
k
No
To P
ower
Sup
ply
(Sys
tem
) flo
wcha
rtN
oW
hen
IC12
03 p
in15
PC
ON
T1 h
as g
one
"H",
is th
e SW
3.3V
vol
tage
out
put?
Yes
Rep
lace
IC12
03 o
r rep
lace
the
MB
boar
d
Yes
Chec
k SY
S_RS
T si
gnal
out
put
Is IC
1203
pin
51 "H
"(3.3
V)?
The
mou
ntin
g co
nditio
n of
R11
56 a
re O
K?
No
Rep
lace
IC12
03 a
nd th
e M
B bo
ard
Y
esCh
eck
the
com
mun
icat
ion
with
the
host
CP
U (S
YSCO
N_RE
Q s
igna
l che
ck)
Do
cycli
cal "
H" a
nd "L
" com
mun
icatio
n wa
vefo
rms
com
e to
IC12
03 p
in30
?N
oIs
ther
e a
prob
lem
with
the
mou
ntin
g co
ndito
n of
R12
62?
No
Do
the
sym
ptom
s im
prov
e af
ter r
epla
cing
IC
101?
No
Y
esCh
eck
the
com
mun
icat
ion
with
the
host
CP
U (S
eria
l com
mun
icat
ion
sign
al c
heck
)D
o cy
clica
l "H
" and
"L" c
omm
unica
tion
wave
form
s co
me
to IC
1203
pin
47, p
in 4
8
and
pin
49?
No
Is th
ere
a pr
oble
m w
ith th
e m
ount
ing
cond
iton
of R
B124
0, R
1243
and
R12
46N
oR
epla
ce IC
1203
or r
epla
ce th
e M
B bo
ard
Is th
e vo
ltage
at t
he "H
" lev
el(3
.3V)
?
SW3.
3V a
nd S
W5V
1.2V
A an
d C
OR
E_1.
1VD
AC3.
3V, 3
.3VA
DC
DC
6V, D
CD
C4V
FE_S
W12
V na
d FE
_SW
5V
AB
9-5
IC12
03 p
in2
ATA
_PC
ON
T2
Yes
Yes
Yes
Yes
Rep
lace
IC12
03 o
r rep
lace
MB
boar
d
BDP-BX38/S280/S380/S383/
BDP-BX38/S280/S380/S383
9-6
Audio
secti
on flo
wcha
rt
Audio
doe
s not
soun
d rig
htNo
Vide
o is
outp
ut p
rope
rlyNo
To V
ideo
secti
on flo
wcha
rt
Yes
Is th
e FL
disp
lay/L
ED d
isplay
corre
ct?No
To M
ain flo
wcha
rt
Yes
Is th
e dr
ive o
pera
ting
prop
erly?
NoTo
Driv
e flo
wcha
rt
Yes
Is ea
ch p
ower
supp
ly su
pplie
d to
the
AUDI
O Bl
ock?
NoTo
Pow
er S
upply
(Sys
tem)
flowc
hart
IC30
5 pin
4: D
AC 3
.3V
Yes
Only
Analo
g 2c
h L/
R Au
dio a
ffecte
d?No
Only
Digit
al Au
dio (H
DMI,
Coax
) af
fecte
d?No
Repla
ce th
e M
B bo
ard
Yes
Yes
Is th
ere
HDM
I out
put?
NoRe
place
the
MB
boar
d
Is th
ere
Coax
ial o
utpu
t?No
Is th
ere
audio
syste
m dig
ital s
ignal
input
to
IC90
7?IC
907
pin1:
AOM
CLK
IC90
7 pin
10:A
OBCK
NoRe
place
the
MB
boar
d
Y
es
Are
cont
rol s
ignals
inpu
t to
IC90
7?
IC90
7pin7
: MUT
ENo
Repla
ce th
e M
B bo
ard
Yes
Is th
ere
a pr
oblem
with
mou
nt co
nditio
n of
C9
23No
Repla
ce IC
907
or re
place
MB
boar
d
Chec
k out
put r
esist
or/ca
pasit
ors
(R92
2,R9
23,C
920,
C918
)
9-7
Vide
o se
ctio
n flo
wch
art
Rep
rodu
ced
vide
o do
es n
ot a
ppea
r rig
ht
Yes
Is th
e FL
dis
play
/LED
dis
play
cor
rect
?N
oTo
Mai
n flo
wch
art
Yes
Is th
e dr
ive
oper
atin
g pr
oper
ly?
No
To D
rive
flow
char
t
Ye
s
Che
ck th
e in
put p
ower
No
IC10
03 p
in 1
3 :+
5V
Ye
s
Are
vide
o si
gnal
s in
put t
o IC
1003
No
Che
ck th
e w
rittin
g fro
m IC
101
Pin1
CVB
S si
gnal
Pin3
Y s
igna
l
Y
es
Are
cont
rol s
igna
ls in
put t
o IC
1003
?
No
Che
ck th
e w
rittin
g fro
m IC
101
IC10
03 p
in6
and
pin
7(M
UTE
1 &
MU
TE2)
( +3.
3V)
Y
es
Is a
vid
eo s
igna
l out
put f
rom
IC10
03?
No
Rep
lace
IC10
03
Y
es
Is a
sig
nal o
utpu
t fro
m e
ach
Vide
o ou
tput
co
nnec
tor?
No
Che
ck o
utpu
t res
isto
rs( R
1031
,R10
30,R
1029
,R10
32,R
1033
,R10
34,R
1035
and
R
1028
,R10
43,R
1044
,R10
45,R
1046
)C
heck
the
pin
jack
blo
ck
BDP-BX38/S280/S380/S383
To P
ower
(Sys
tem
) flo
wch
art
Pin
14
CV
BS s
igna
lPi
n12
Y si
gnal
FL-2
03 B
oard
flow
char
t
Powe
r but
ton
on th
e m
ain
unit
does
not
wor
k
Key1
doe
s no
t ope
rate
Doe
s sy
mpt
om im
prov
e w
hen
repl
acin
g FL
-203
boa
rd?
No
To IF
con
sect
ion
Is th
ere
volta
ge o
f abo
ut 3
.3V
at p
in 3
of C
N70
2 wi
thou
t pre
ssin
g th
e ke
y s?
No
To IF
con
sect
ion
Yes
Yes
CN
331
pin
1 to
nea
r 0V
when
pre
ssin
g th
e po
wer b
utto
n
No
Che
ck p
atte
rn a
nd S
331
Che
ck th
e po
tent
ial v
olta
ge C
N70
2
pin3
cha
nge
from
+3.
3V to
nea
r 0V
whe
n pr
essi
ng th
e st
op b
utto
n.
Yes
If-17
0 IF
boa
rd fl
ow c
hart
Doe
s sy
mpt
om im
prov
e wh
en re
plac
e IF
-170
boa
rd?
Yes
Whi
ch ro
w of
key
s do
not
ope
rate
?
STO
P bu
ttons
->
Key1
doe
s no
t ope
rate
Ref
eren
ce: R
elat
ions
hip
of B
utto
ns a
nd V
olta
ges
OPE
N/C
LOSE
but
ton
-> K
ey2
does
not
ope
rate
PLAY
but
ton
->
Key3
doe
s no
t ope
rate
Inpu
t
2.90
-3.30
0.00
-0.40
KEY0
Key_OFF
POWER
KEY1
Key_OFF
STO
P
KEY2
Key_OFF
OPE
N/CLO
SE
KEY3
Key_OFF
PLAY
9-8
Dis
conn
ecte
d ha
rnes
s or
FL
-203
boa
rd re
plac
e
BDP-BX38/S280/S380/S383
chan
ge fr
om 3
.3V
mig
ht b
e br
oken
flowc
hart
Rec
onne
ct h
arne
ss, i
f sym
tom
sdo
not
impr
ove,
repl
ace
harn
ess
Doe
s ha
rnes
s di
scon
nect
ed
CN
331
or b
roke
n fr
om
Yes
No
No
To IF
con
sect
ion
flowc
hart
Rec
onne
ct F
FC, i
f sym
tom
sdo
not i
mpr
ove,
repl
ace
FFC
Doe
s F
FC d
isco
nnec
ted
C
N70
2 or
bro
ken
from
Yes
No
flowc
hart
Dis
conn
ecte
d FF
C o
r IF
-170
boa
rd re
plac
e
Rec
onne
ct F
FC, i
f sym
tom
sdo
not
impr
ove,
repl
ace
FFC
Doe
s FF
C d
isco
nnec
ted
C
N70
2 or
bro
ken
from
Yes
Che
ck p
atte
rn a
nd S
703
mig
ht b
e br
oken
Yes
Is th
ere
volta
ge o
f abo
ut 3
.3V
at p
in 2
of C
N70
2 wi
thou
t pre
ssin
g th
e ke
y s?
To IF
con
sect
ion
Yes
Che
ck th
e po
tent
ial v
olta
ge C
N70
2
pin2
cha
nge
from
+3.
3V to
nea
r 0V
whe
n pr
essi
ng th
e st
op b
utto
n.
flowc
hart
Dis
conn
ecte
d FF
C o
r IF
170
boar
d re
plac
e
Rec
onne
ct F
FC, i
f sym
tom
sdo
not
impr
ove,
repl
ace
FFC
Doe
s FF
C d
isco
nnec
ted
C
N70
2 or
bro
ken
from
Yes
No
Che
ck p
atte
rn a
nd S
702
mig
ht b
e br
oken
Yes
Key2
doe
s no
t ope
rate
Is th
ere
volta
ge o
f abo
ut 3
.3V
at p
in 2
of C
N70
2 wi
thou
t pre
ssin
g th
e ke
y s?
To IF
con
sect
ion
Yes
Che
ck th
e po
tent
ial v
olta
ge C
N70
2
pin2
cha
nge
from
+3.
3V to
nea
r 0V
whe
n pr
essi
ng th
e st
op b
utto
n.
flowc
hart
Dis
conn
ecte
d FF
C o
r IF
-170
boa
rd re
plac
e
Rec
onne
ct F
FC, i
f sym
tom
sdo
not
impr
ove,
repl
ace
FFC
Doe
s ha
rnes
s di
scon
nect
ed
CN
702
or b
roke
n fr
om
Yes
No
Che
ck p
atte
rn a
nd S
701
mig
ht b
e br
oken
Yes
Key3
doe
s no
t ope
rate
No
No No
IF-1
70 B
oard
flowc
hart (
FLD
does
not li
ght
Is the
re vo
ltage
abo
ut 5.8
V at
PS12
01?(
MB bo
ard)
No
Chec
k the
+5.8V
at C
N702
pin7
Is the
re th
e FFC
disc
onne
cted f
rom
CN70
2?
Is pin
5 of IC
702 o
scilla
ting?
Yes
Is the
re in
put o
f puls
e to p
ins 7,
8 an
d 9 of
IC
702?
Yes
Repla
ce IC
702
If the
symp
toms d
o not
impr
ove,
repla
ce th
e IF
boar
dYes
Yes
Repla
ce P
S120
1(MB
Boa
rd)
If the
symp
toms d
o not
impr
ove,
repla
ce
IF B
oard
Chec
k the
circu
its su
rroun
ging t
he F
LD D
D CO
NVER
TER.
Is th
ere vo
ltage
at C
N702
pin1
1?
Repla
ce IC
702.
If no e
ffect,
repla
ce th
e IF
Boa
rdNo No
9-9
BDP-BX38/S280/S380/S383
To IF
con f
lowch
artNo
NoCh
eck t
he pa
ttern
arou
nd C
N120
4(MB
board
)If t
he sy
mptom
s do n
ot im
prov
e, re
place
MB
Boa
rd
No
Reco
nnec
t the F
FCIf t
he sy
mptom
s do n
ot im
prov
e, re
place
FF
C
Yes
Is the
re vo
ltage
abou
t -25
V at
JL70
1? No
Y
es
Is the
volta
ge of
3.3V
at IC
702 p
in 43
and p
in13?
No
Y
es
Chec
k the
patte
rn 3.3
V lin
e of I
F boa
rd
Yes
To IF
con f
lowch
artNo
Is the
re in
put p
ulse t
o CN7
02
pins 1
3, 15
and 1
6?
To IF
con f
lowch
artIs
the F
FC di
scon
necte
d fr
om C
N702
?
Repla
ce F
FC. If
the s
ympto
ms do
not
impr
oves
, rep
lace I
F bo
ard
Is the
re in
put p
ulse t
o CN1
204
pins 8
, 9 an
d 11?
Reco
nnec
t the F
FCIf t
he sy
mptom
s do n
ot im
prov
e, re
place
FFC
Yes
No
Yes
No
NoCh
eck F
FC bB
conn
ected
from
CN70
2 or b
roke
n
Reco
nnec
t the F
FCIf t
he sy
mptom
s do n
ot im
prov
e, ch
ange
dthe
IF bo
ard
Yes
chan
ge IF
boar
dNo
9-10
BDP-BX38/S280/S380/S383R
emot
e co
ntro
l doe
s no
t ope
rate
Che
ck o
f +3.
3V v
olta
ge a
t IC
703
pin1
? No
(MB
boar
d)
No T
o Po
wer
sup
ply
flow
cha
rt
Yes
NoC
heck
FFC
disc
onne
cted
from
C
N70
2 or
bro
ken?
Yes
To IF
con
sect
ion
flowc
hart
Che
ck o
f app
eara
nce
wav
efor
m d
urin
g pr
essi
ng re
mot
e co
ntro
l at I
C70
3 pi
n2No
Yes
Che
ck o
f +3.
3V v
olta
ge a
t CN
1201
pin
13?
Che
ck o
f +3.
3V v
olta
ge a
t CN
701
pin1
1?
No
Rep
lace
FFC
If
sym
ptom
s do
not
impr
ove,
C
hang
e IF
boa
rd
Che
ck o
f app
eara
nce
wav
efor
m d
urin
g pr
essi
ng re
mot
e co
ntro
l at C
N12
04
pin1
9(M
B bo
ard)
Yes
Yes
Cha
nge
IF B
oard
NoC
heck
of a
ppea
ranc
e wa
vefo
rm
durin
g pr
essi
ng re
mot
e co
ntro
lat
CN
702
pin5
No
Rep
lace
IC70
1 If
sym
ptom
s do
not
impr
ove,
C
hang
e IF
boa
rd
Chec
k pa
ttern
alo
ng S
IRCS
line
If sy
mpt
om d
o no
t im
prov
e,
Chan
ge IF
boa
rd
Che
ck F
FC d
iscon
nect
ed fr
om
CN
702
or b
roke
n?
No
Rec
onne
ctFF
CIf
sym
ptom
s do
not
impr
ove,
C
hang
e FF
C
Yes
Yes
Cha
nge
IF B
oard
Yes
Chec
k pa
ttern
aro
und
IC70
3 If
sym
ptom
do
not i
mpr
ove,
Ch
ange
IF b
oard
Whit
e LED
does
not li
ght
(BDP
-BX3
8/380
/S38
3 ONL
Y)
Is the
re vo
ltage
of ab
out 5
.8V at
PS1
201?
Yes
Is the
re vo
ltage
of ab
out 3
.3V vo
ltage
at
Base
Q70
9?
No
Yes
No
Chec
k +5.8
V vo
ltage
at C
N120
4 pin1
6?No
Yes
Chec
k if F
FC br
oken
or di
scon
necte
d from
CN7
02No
Yes
Reco
nnec
t FFC
. If sy
mptom
s do n
ot im
prove
,rep
lace F
FC
Chec
k of +
3.3V
volta
ge at
CN7
02 pi
n10?
No
Yes Ye
s
Yes
Repla
ce IF
Boa
rd.
No
To IF
Con f
lowch
art
Chec
k patt
ern ar
ound
CN1
204 o
f MB
Board
. If s
ympto
ms do
not im
prove
, repla
ce M
B bo
ard.
9-11
BDP-BX38/S280/S380/S383
(MB
board
)
Repla
ce P
S120
1(MB
board
)If s
ympto
ms to
not im
prove
repla
ce IF
board
If sym
ptoms
still
do no
t impro
ve,
replac
e MB
board
Chec
k +5.8
V vo
ltage
at C
N702
pin7
?
Yes
Chec
k if F
FC br
oken
or di
scon
necte
d from
CN7
02
Yes
Reco
nnec
t FFC
. If sy
mptom
s do n
ot im
prove
,rep
lace F
FC
Chec
k of +
3.3V
volta
ge at
R71
8?No
Repla
ce R
718.
If sym
ptoms
do no
t impro
ve,
replac
e FR
board
Chec
k pola
rity of
D70
9(LED
)Is
revers
e pola
rity oc
curs?
NoCh
eck p
attern
arou
nd D
709(L
ED),
If sym
ptoms
do no
t impro
ve, c
hang
e IF b
oard.
Repla
ce D
709.
If sym
ptoms
do no
t impro
ve,
replac
e IF b
oard
Chec
k patt
ern ar
ound
D70
9(LED
),If sy
mptom
sdo
not im
prove
s, ch
ange
IF bo
ard
Repla
ce Q
709.
If sym
ptoms
do no
t impro
ve,
replac
e IF b
oard
Is the
re vo
ltage
of ab
out 3
.3V vo
ltage
at
Colle
ctor Q
709?
Chec
k pola
rity of
D70
9(LED
) Is
revers
e pola
rity oc
curs?
Repla
ce D
709
If sym
ptoms
do no
t impro
ve, c
hang
e IF b
oard
Yes
Yes
NoNoNo
9-12
Op
tica
l B
lock
Un
it (
BU
) IO
P c
hec
k fl
ow
(zz
) ~
[B
efo
re B
U R
epla
cem
ent]
Op
tica
l B
lock
Un
it (
BU
) O
P D
ata
Wri
te F
low
(yy
) ~
[A
fter
BU
/MB
Rep
lace
men
t]
BD
P-S
380
can
pla
y th
e B
D-d
isc
BLX
-104
BD
P-S
380
can
pla
y th
e D
VD
/CD
-dis
c
Che
ck D
rive
Pow
er
Sup
ply
CN
301 P
in 3
: 12V
/ IC
309 P
in 1
: 5V
Che
ck P
S301,
PS
302
Repla
ce P
S w
hen o
pen
Che
ck /
repla
ce t
he F
FC
cable
, th
en
check
B
DP
-S380
opera
tes
norm
ally
OP
T-0
01 F
FC
cable
(1-8
38-6
15-
11)
SP
D-0
01
FF
C c
able
(1-8
38-6
17-1
1)
Che
ck t
he O
ptic
al B
lock
Uni
t (B
U)
by
serv
ice m
ode.
(Flo
wch
art
zz)
BU
IO
P is
OK
?R
epla
ce t
he O
ptic
al B
lock
Uni
t (B
U)
Optic
al B
lock
Uni
t (B
U)
repla
ce
(Flo
wch
art
yy)
OK
Optic
al B
lock
or
BU
no p
roble
m
DV
D:
HLX
-513
CD
: H
LX
-A1
NO
YE
S
NO
YE
S
YE
S
NO
NO
YE
S
NO
YE
S
Ent
er
Serv
ice M
ode
Pre
ss <
OP
EN
/CL
OS
E>
., <
PL
AY
>,<
ST
OP
>and
plu
g in
AC
Pow
er
Insi
de *
Serv
ice M
ode M
enu
Sele
ct [
8]
Drive
Insi
de *
Drive
Sele
ct [
7]
OP
Che
ck M
enu
Insi
de *
OP
Che
ck M
enu
Sele
ct [
2]
dIO
P t
hen
pre
ss 'E
NT
ER
'
Speci
ficatio
n dIO
PB
D:
3m
AD
VD
, C
D:
3m
A
IOP
out
of
speci
ficatio
n ne
ed B
U
repla
cem
ent
Optic
al B
lock
Uni
t (B
U)
repla
ce
(Flo
wch
art
yy)
AC
Pow
er
OF
F
NO
YE
S
Rem
ove
the
defe
ctiv
e B
U f
rom
Loadin
g
Ass
y and
als
o r
em
ove
BU
insu
lato
r (4
pcs
)
Unp
ack
new
BU
and
take
OP
Data
B
arc
ode p
hoto
by
cam
era
Ass
em
ble
BU
with
Ins
ulato
rs t
o L
oadin
g
Ass
y (t
ight
en
scre
w w
ith 2
kgf)
Deco
de t
he O
P D
ata
Barc
ode p
hoto
usin
g
BD
PR
dec.
exe
and
save
the
test
data
to
US
B m
em
ory
(File
Nam
e:
BuD
ata
.txt
)
Ent
er
Serv
ice M
ode a
nd ins
ert
US
B
mem
ory
to U
SB
conn
ect
or
Sele
ct [
8]
Drive
-->
S
ele
ct [
1]
Drive
OP
data
Write
Pre
ss E
NT
ER
Aft
er
Fin
ish
ing
ReW
rite
OP
data
-->
Tur
n A
C P
ow
er
OF
FA
nd c
onf
irm
dIO
P b
y se
lect
[7]
OP
Che
ck
Menu
to v
erify
IO
P in
speci
ficatio
n
IOP
in s
peci
ficatio
n --
> T
urn
AC
Pow
er
OF
F
Tur
n P
ow
er
ON
and
che
ck p
layb
ack
perf
orm
anc
e u
sing
BD
, D
VD
and
CD
BLX
-104
DV
D:
HLX
-513
CD
: H
LX
-A1
Th
e fo
llow
ing
ca
ses
ne
ed
OP
Da
ta W
rite
:(1
) R
ep
lace
BU
(M
B is
orig
ina
l)(2
) R
ep
lace
MB
(B
U is
orig
ina
l)(3
) R
ep
lace
bo
th B
U a
nd
MB
JIG
re
qu
ire
me
nt
Dig
ital c
am
era
(w
ith m
acr
o m
od
e)
Ba
rco
de
de
cod
er
(BD
PR
dec.
exe
)in
sta
lled
in ji
gP
C's
(jig
pu
rpo
se)
US
B m
em
ory
ES
D fre
e w
ork
be
nch
l
Dri
ve f
low
char
t
-+-+
BDP-BX38/S280/S380/S383
Eth
erne
t flo
wch
art
Can
not c
onne
ct w
ith th
e ne
twor
k, c
anno
t up
date
thro
ugh
the
netw
ork
Is th
e LA
N c
able
plu
gged
in p
rope
rly?
No
Plu
g in
the
LAN
cab
le fi
rmly
Yes
Is th
e LE
D o
f the
hub
rou
ter
lit?
(LIN
K L
ED
)N
oIs
pow
er s
uppl
ied
to th
e M
B b
oard
?N
oT
o P
ower
Sup
ply
(Sys
tem
) flo
wch
art
Yes
Yes
Rep
lace
the
MB
boa
rd.
Are
the
netw
ork
setti
ngs
of th
e m
enu
corr
ect?
No
Mak
e th
e co
rrec
t net
wor
k se
tting
s.
Yes
Rep
lace
the
MB
boa
rd
9-13
BDP-BX38/S280/S380/S383
US
B (
Rea
r) D
evic
e F
low
US
B d
evic
e is
not
rec
ogni
zed
Inse
rt th
e U
SB
dev
ice
agai
n.Is
it r
ecog
nize
d w
hen
the
pow
er is
tu
rned
OF
F a
nd th
en O
N a
gain
?
No
Is 5
V p
rese
nt a
t CN
604
pin1
(MB
-13
8 bo
ard)
?N
oIs
6V
pre
sent
at I
C60
3 pi
n8(M
B b
oard
)N
oP
ower
sup
ply
boar
d de
fect
ive
Poo
r co
ntac
t of t
he U
SB
dev
ice
Doe
s re
plac
ing
IC60
1(M
B b
oard
) im
prov
e th
e sy
mpt
oms?
No
Rep
lace
the
MB
boa
rd
Yes
IC60
3(M
B b
oard
) de
fect
ive
9-14
BDP-BX38/S280/S380/S383
Yes
Yes
Rep
lace
the
MB
boa
rd
Yes
US
B (F
ront
) Dev
ice
Flow
(exc
ept B
DP
-S28
0)
US
B d
evic
e is
not
reco
gniz
ed
Inse
rt th
e U
SB
dev
ice
agai
n.Is
it re
cogn
ized
whe
n th
e po
wer
is
turn
ed O
FF a
nd th
en O
N a
gain
?
No
Is 5
V p
rese
nt a
t CN
201(
IF-1
70bo
ard)
pin
1?N
oIs
5V
pre
sent
at
CN
1204
(MB
boa
rd) P
in 5
or p
in 6
?N
oIs
6V
pre
sent
at C
601p
in8
(MB
boa
rd)?
No
Pow
er s
uppl
y IC
310
(MB
boa
rd -
defe
ctiv
e
Yes
Yes
Yes
Yes
Poo
r con
tact
of t
he U
SB
dev
ice
Def
ectiv
e FF
C b
etw
een
the
IFbo
ard
and
the
MB
boa
rd.
Doe
s re
plac
ing
IC60
1(M
B b
oard
) im
prov
e th
e sy
mpt
oms?
No
Rep
lace
the
MB
boa
rd
Yes
Rep
lace
the
FFC
bet
wee
n th
e M
B b
oard
and
the
IF b
oard
.D
o th
e sy
mpt
oms
impr
ove?
No
Rep
lace
the
MB
boa
rd.
IC60
2(M
B b
oard
) def
ectiv
e
Yes
Def
ectiv
e FF
C b
etw
een
the
IFbo
ard
and
the
MB
boa
rd
9-15E
BDP-BX38/S280/S380/S383
BDP-BX38/S280/S380/S383
10-1
SECTION 10REPAIR PARTS LIST
The components identified by mark or dotted line with mark are critical for safety.Replace only with part number specified.
Les composants identifiés par une marquesont critiquens pour la sécurité.Ne les remplacer que par une pièce portant le numéro spécifié.
The components identified by mark containconfidential information.Strictly follow the instructions whenever the components are repaired and/or replaced.
Les composants identifiés par la marque con-tiennent des informations confidentielles.Suivre scrupuleusement les instructions chaque fois qu’un composant est remplacé et / ou réparé.
10-1. EXPLODED VIEWS
NOITCES ESAC .1-1-01
NOTE: -XX and -X mean standardized parts, so they
may have some difference from the original one.
Color Indication of Appearance Parts Example: KNOB, BALANCE (WHITE) . . . (RED) Parts Color Cabinet’s Color
Items marked “*” are not stocked since they are seldom required for routine service. Some delay should be anticipated when ordering these items.
The mechanical parts with no reference number in the exploded views are not supplied.
Accessories and packing materials are given in the last of the electrical parts list.
1
2
Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark
AbbreviationAEP : AEP ModelAR : Argentina ModelAUS : Australia New Zealand ModelBR : Brazilian ModelCND : Canadian ModelE : Latin America ModelEA : Middle East ModelIN : India Model
CN : China Model
PX : PX ModelRUS : Russian ModelSP : Singapore ModelTH : Thailand ModelTW : Taiwan ModelUS : USA ModelUK : UK Model
3
ns
not supplied
5
*
KS : Saudi Arabia Model
1 X-2560-360-1 PANEL ASSY, FRONT (BDP-BX38:US)1 X-2560-363-1 PANEL ASSY, FRONT (BDP-S383)1 X-2549-108-1 PANEL ASSY, FRONT (BDP-S380:US,PX)1 X-2580-331-1 PANEL ASSY, FRONT (BDP-S380:CND)1 X-2560-361-1 PANEL ASSY, FRONT
(BDP-S380:EXCEPT(US,CND,PX)1 X-2580-332-1 PANEL ASSY, FRONT(BDP-BX38:CND)
1 X-2560-362-1 PANEL ASSY, FRONT (BDP-S280: AEP,UK)1 X-2560-359-1 PANEL ASSY, FRONT (BDP-S280: US)
3 3-077-331-21 +BV3 (3-CR)4 3-077-331-41 +BV3 (3-CR)5 A-1797-171-A SERVICE ASSY, CASE UPPER
3
3
ns
ns
4
ns
ns
7-682-144-01 SCREW +P 3X3
A-1797-174-A SERVICE ASSY, FL(EXCEPT BDP-S280:BR)A-1816-039-A SERVICE ASSY, FLA-1797-246-A SERVICE ASSY, IFA-1797-173-A SERVICE ASSY IF
A-1816-009-A SERVICE ASSY, IF
2 X-2549-107-1 TRAY ASSY, COVER
8
7
6
7788
8
(BDP-S280:BR)(BDP-S280:EXCEPT BR)
(BDP-S380/S383/BX38)(BDP-S280:BR)
4
6
ns: not supplied
1 X-2580-330-1 PANEL ASSY, FRONT(BDP-S280:CND)
1 A-1816-007-A PANEL ASSY, FRONT (BDP-S280: BR)
5 A-1816-379-A SERVICE ASSY, CASE UPPER(EXCEPT BDP-S280:BR)(BDP-S280:BR)
BDP-BX38/280/S380/S383
10-1-2. MAIN CHASSIS SECTION
Ref. No. Part No. Description Remark
The components identified by markor dotted line with mark are
critical for safety.Replace only with part number specified.
Les composants identifiés par une marque sont critiquens pour la sécurité.Ne les remplacer que par une pièce portant le numéro spécifié.
103
104
101101
101
101
101
102
104
105
10-2
not supplied
5 BD drive
not supplied
101 3-077-331-21 +BV3 (3-CR)103 A-1750-926-A LOADING FOR SERVICE102 A-1797-172-A SERVICE ASSY, MB
(BDP-S380:AR,E,US,TW,CND,UK,PX /BX38)102 A-1815-999-A SERVICE ASSY, MB (BDP-S280:BR)102 A-1797-254-A SERVICE ASSY, MB
(BDP-S380:SP,TH,CH,ME,KS,IND/S383/BX39)102 A-1797-288-A SERVICE ASSY, MB(BDP-S280:CND,AEP,UK)102 A-1797-245-A SERVICE ASSY, MB (BDP-S280:US)104 1-474-267-11 SWITCHING REGULATOR
(BDP-S280: EXCEPT (US,CND)/S380:EXCEPT (US,CND)/S383)104 1-474-265-11 SWITCHING REGULATOR
(BDP-S280: US,CND/S380:US,CND/BX38)105 1-835-684-21 POWER-SUPPLY CORD (BDP-BX39)105 1-828-450-11 POWER-SUPPLY CORD (BDP-S383:E,AE1)105 1-835-688-21 POWER-SUPPLY CORD (BDP-S383:UK)105 1-836-410-11 POWER SUPPLY CORD (BDP-S380:IN)105 1-835-093-11 POWER-SUPPLY CORD (BDP-S380:SP,ME,PX,E,AR)105 1-835-680-21 POWER-SUPPLY CORD (BDP-S380:TH)105 1-837-385-11 POWER-SUPPLY CORD (BDP-S380:CH)105 1-835-688-21 POWER-SUPPLY CORD (BDP-S380:KS,UK/S280:UK)105 1-835-684-21 POWER-SUPPLY CORD
(BDP-BX38/S380:US,CND/BX280:US,CND/BX383:UK)105 1-835-683-21 POWER-SUPPLY CORD (BDP-S380:PX,E,AR)105 1-828-845-21 POWER-SUPPLY CORD (BDP-S380:TW)105 1-835-093-11 POWER-SUPPLY CORD (BDP-S380: AEP,RUS)
105 1-837-073-11 POWER-SUPPLY CORD (BDP-S280: BR )
10-3
BDP-BX38/S280/S380/S383
NOITCES DB .3-1-01
Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark
151 A-1750-926-A LOADING FOR SERVICE 152 4-167-321-01 HOLDER, FFC (RIGHT) 153 3-087-053-11 +BVTP2.6 (3CR) 154
155 DEVICE,OPTICAL KEM-470AAA/C2RP
151
152
154
155
not supplied
not supplied
not supplied
not supplied
not supplied not supplied
153
The components identified by mark or dotted line with mark are
critical for safety.Replace only with part number specified.
Les composants identifiés par une marque sont critiquens pour la sécurité.Ne les remplacer que par une pièce portant le numéro spécifié.
156
157
156 157
1-838-619-11 FLEXIBLE FLAT CABLE (LDG-002)
1-838-615-11 FLEXIBLE FLAT CABLE (OPT-001)1-838-617-11 FLEXIBLE FLAT CABLE (SPD-001)8-820-445-04
BDP-BX38/S280/S380/S383
10-4
The components identified by markor dotted line with mark are
critical for safety.Replace only with part number specified.
Les composants identifiés par une marque sont critiquens pour la sécurité.Ne les remplacer que par une pièce portant le numéro spécifié.
10-1-4. ACCESSORIES
201Audio/Video Cable (Phono Plug x3)
203203
204204
204
204
204
201
202
203Conversion Adaptor
202HDMI Cable
204Remote Commander
//
DBP7
0T- B1
RM
YT
S EP AU
S TO P
PLAY
EN /P OCL OSE
IN PU T
F A V ORITE S
TI
HGL
II
I
I
L OWY E L
BL U ERE D
G RE EN
1-569-008-41 ADAPTOR, CONVERSION (BDP-S380:PX,E)1-569-008-22 ADAPTOR, CONVERSION 2P(BDP-S380:PX,E)
1-838-282-11 CABLE, HDMI (1.5M)(BDP-S380:AR,E,SP,TH,CH,ME,KS,IND/BX38:US)
1-751-271-71 CORD, CONNECTION (AV) (BDP-S380:US,CND,TW)1-837-797-21 CORD, CONNECTION (AV) (BDP-S380:US,CND,TW)1-834-169-22 CORD, CONNECTION (HDMI CABLE)(BDP-S380:AR,E)
* 4-261-090-11 MANUAL, INSTRUCTION (BDP-S380:US,CND/BX38)(ENGLISH)* 4-261-090-21 MANUAL, INSTRUCTION (BDP-S380:US,PX,CND/BX38)(FRENCH)* 4-261-090-31 MANUAL, INSTRUCTION (BDP-S380:E,AR/S383:E) (SPANISH)* 4-261-090-41 MANUAL, INSTRUCTION (BDP-S380: RUS) (RUSSIA)
* 4-261-090-51 MANUAL, INSTRUCTION (BDP-S380: RUS) (UKRAINIAN)
* 4-261-090-61 MANUAL, INSTRUCTION (BDP-S380:TW) (CHINESE TRADITIONAL)* 4-261-091-21 MANUAL, INSTRUCTION (BDP-S380:SP) (CHINESE TRADITIONAL)* 4-261-091-31 MANUAL, INSTRUCTION (BDP-S380:CH) (CHINESE SIMPLIFIED)* 4-261-091-11 MANUAL, INSTRUCTION (BDP-S380:SP,TH) (ENGLISH)
* 4-261-091-51 MANUAL, INSTRUCTION (BDP-S380:EA,KS) (ARABIC)* 4-261-091-41 MANUAL, INSTRUCTION (BDP-S380:KS, ) (ENGLISH)
* 4-261-092-11 MANUAL, INSTRUCTION(BDP-S380:UK,IN,AUS/S383:UK) (ENGLISH)* 4-261-092-21 MANUAL, INSTRUCTION(BDP-S380: AE1/S383:AE1) (FRENCH)
* 4-261-092-31 MANUAL, INSTRUCTION (BDP-S380: AE1/S383:AE1) (GERMAN)* 4-261-092-41 MANUAL, INSTRUCTION (BDP-S380: AE1/S383:AE1) (ITALIAN)* 4-261-092-51 MANUAL, INSTRUCTION (BDP-S380: AE1/S383:AE1) (DUTCH)* 4-261-093-11 MANUAL, INSTRUCTION (BDP-S380: AE2) (SPANISH)* 4-261-093-21 MANUAL, INSTRUCTION (BDP-S380: AE2) (PORTUGUESE)
* 4-261-093-31 MANUAL, INSTRUCTION (BDP-S380: AE2) (SWEDISH)* 4-261-093-41 MANUAL, INSTRUCTION (BDP-S380: AE2) (DANISH)* 4-261-093-51 MANUAL, INSTRUCTION (BDP-S380: AE2) (FINNISH)* 4-261-827-11 MANUAL, INSTRUCTION (BDP-S280: US,CND)(ENGLISH)* 4-261-827-21 MANUAL, INSTRUCTION (BDP-S280: CND)(FRENCH)
* 4-261-854-11 MANUAL, INSTRUCTION (BDP-S280: AE1) (FRENCH)* 4-261-854-21 MANUAL, INSTRUCTION (BDP-S280: AE1) (GERMAN)* 4-261-854-31 MANUAL, INSTRUCTION (BDP-S280: AE1) (ITALIAN)* 4-261-854-41 MANUAL, INSTRUCTION (BDP-S280: AE1) (DUTCH)
* 4-261-854-51 MANUAL, INSTRUCTION (BDP-S280: AE2)(SPANISH)* 4-261-854-61 MANUAL, INSTRUCTION (BDP-S280: AE2) (PORTUGUESE)* 4-261-854-71 MANUAL, INSTRUCTION (BDP-S280: AE2)(SWEDISH)* 4-261-854-81 MANUAL, INSTRUCTION (BDP-S280: AE2)(DANISH)* 4-261-854-91 MANUAL, INSTRUCTION (BDP-S280: AE2)(FINNISH)
1-489-401-11 REMOTE COMMANDER (RMT-B109C)(BDP-S380:CH)1-489-402-11 REMOTE COMMANDER (RMT-B110A)(BDP-BX38:US)1-489-399-11 REMOTE COMMANDER (RMT-B109A)
(BDP-S380:AR,E,US,TW,CND/S280: US,CND,PX)1-489-400-11 REMOTE COMMANDER (RMT-B109P)
(BDP-S380:PX,UK,SP,TH,ME,KS,IN,
1-489-402-11 REMOTE COMMANDER (RMT-B110A)(BDP-BX39/S383:E)1-489-435-11 REMOTE COMMANDER (RMT-B110P)(BDP-S383:E,AE1)
201201
204IN,AEP,RUS,AUS/S280:AEP,UK)
EA
* 4-275-827-11 MANUAL, INSTRUCTION (BDP-S280: BR)(PORTUGUESE)
BDP-BX38/S280/S380/S383
10-5
Ref-No. Part No. Part Description R e m a r k sRef-No. Part No. Part Description R e m a r k s
NOTE:Due to standardization, replacements in the
used on the set.-XX and -X mean standardized parts, so
original one.RESISTORSAll resistors are in ohms.
Not all of the parts for SWITCHINGREGULATOR are listed.Items marked * are not stocked since theyare seldom required for routine service.Some delay should be anticipated whenordering these items.SEMICONDUCTORSIn each case, u: µ, for example:
uA. . : µA. . uPA. . : µPA. .uPB. . : µPB. . uPC. . : µPC. .uPD. . : µPD. .CAPACITORSuF: µFCOILSuH: µHAbbreviationAEP : AEP ModelAR : Argentina ModelAUS : Australia New Zealand ModelBR : Brazilian Model
CND : Canadian ModelE : Latin America ModelEA : Middle East ModelIN : India ModelMX : Mexican Model
10-2. ELECTRICAL PARTS LIST
PX : PX ModelRUS : Russian ModelSP : Singapore ModelTH : Thailand ModelTW : Taiwan ModelUS : USA ModelUK : UK Model
or dotted line with mark are criticalfor safety.Replace only with part number
When indicating parts by referencenumber, please include the board.
Strictly follow the instructionswhenever the components are repairedand/or replaced.
A-1797-174-A SERVICE ASSY, FL
A-1816-039-A SERVICE ASSY, FL (BDP-S280:BR)
***************************************************
CN331 1-564-012-11 PIN, CONNECTOR 2PS331 1-771-874-11 SWITCH, TACTILE
A-1797-246-A SERVICE ASSY,IF (BDPS280:EXCEPT BR)
A-1797-173-A SERVICE ASSY, IF(BDP- S380/
(BDP-S280:BR)
**********************************************************************************
<CAPASITOR>C201 1-112-298-91 CERAMIC CHIP 1UF 10% 16V
(BDP-S380/S383)C202 1-162-910-91 CERAMIC CHIP 5PF 0.25PF 50V
(BDP-S380/S383)C203 1-162-910-91 CERAMIC CHIP 5PF 0.25PF 50V
(BDP-S380/S383)C703 1-125-972-91 ELECT 100UF 20.00% 16VC704 1-124-236-91 ELECT 47UF 20.00% 16V
C707 1-107-726-91 CERAMIC CHIP 0.01UF 10.00% 16VC712 1-128-131-91 ELECT 22UF 20.00% 50VC714 1-107-726-91 CERAMIC CHIP 0.01UF 10.00% 16VC715 1-107-726-91 CERAMIC CHIP 0.01UF 10.00% 16VC719 1-163-015-91 CERAMIC CHIP 0.0033UF 10.00% 50V
C720 1-163-015-91 CERAMIC CHIP 0.0033UF 10.00% 50V
<USB CONNECTOR>CN201 1-842-603-11 USB CONNECTOR (A)
<DIODE>D705 6-502-961-01 DI DA2J10100LD706 6-502-961-01 DI DA2J10100L
D707 6-502-964-01 DI DZ2J047M0LD709 6-503-465-01 DI 1L034XW34A0CT501
<IC>IC702 6-701-729-01 IC PT6315IC703 6-600-626-01 IC GP1UW254GKC1
< JUMPER RESISTOR>JR701 1-216-295-91 SHORT CHIP 0JR702 1-216-295-91 SHORT CHIP 0JR703 1-216-295-91 SHORT CHIP 0JR704 1-216-296-91 SHORT CHIP 0JR705 1-216-296-91 SHORT CHIP 0
JR706 1-216-296-91 SHORT CHIP 0JR707 1-216-296-91 SHORT CHIP 0JR708 1-216-296-91 SHORT CHIP 0JR709 1-216-296-91 SHORT CHIP 0JR710 1-216-296-91 SHORT CHIP 0
JR711 1-216-296-91 SHORT CHIP 0JR712 1-216-295-91 SHORT CHIP 0JR713 1-216-295-91 SHORT CHIP 0JR714 1-216-296-91 SHORT CHIP 0JR715 1-216-296-91 SHORT CHIP 0
JR716 1-216-295-91 SHORT CHIP 0JR717 1-216-295-91 SHORT CHIP 0JR718 1-216-296-91 SHORT CHIP 0JR720 1-216-296-91 SHORT CHIP 0JR721 1-216-296-91 SHORT CHIP 0
JR722 1-216-295-91 SHORT CHIP 0JR723 1-216-295-91 SHORT CHIP 0JR724 1-216-296-91 SHORT CHIP 0JR726 1-216-295-91 SHORT CHIP 0JR728 1-216-296-91 SHORT CHIP 0
<INDUCTOR>L702 1-414-857-51 INDUCTOR 100UH
<DISPLAY.ND701 1-483-325-11 VACUUM FLUORESCENT DISPLAYS
<TRANSISTOR>Q706 6-552-056-01 TR 2SC6046-T112-1W
KS : Saudi Arabia Model
CN : China Model
S383/BX38)
IF-170FL-203
A-1816-009-A SERVICE ASSY, IF
*
*
EXCEPT (BDP-S 280:BR)
BDP-BX38/S280/S380/S383
10-6
Ref-No. Part No. Part Description R e m a r k s Ref-No. Part No. Part Description R e m a r k s
Q707 6-552-056-01 TR 2SC6046-T112-1WQ709 6-552-056-01 TR 2SC6046-T112-1W
<RESISTOR>R201 1-216-295-91 SHORT CHIP 0 (BDP-S380/S383)R202 1-216-864-91 SHORT CHIP 0 (BDP-S380/S383)R203 1-216-864-91 SHORT CHIP 0 (BDP-S380/S383)R704 1-216-864-91 SHORT CHIP 0R708 1-216-805-91 METAL CHIP 47 5% 1/10W
R714 1-216-839-91 METAL CHIP 33K 5% 1/10WR715 1-216-845-91 METAL CHIP 100K 5% 1/10WR717 1-216-809-91 METAL CHIP 100 5% 1/10W
(BDP-S380/S383)R718 1-216-829-91 METAL CHIP 4.7K 5% 1/10W
(BDP-S380/S383)R726 1-216-829-91 METAL CHIP 4.7K 5% 1/10W
<SWITCH>S701 1-692-431-21 SWITCH, TACTILES702 1-692-431-21 SWITCH, TACTILES703 1-692-431-21 SWITCH, TACTILE
<TRANSFORMER>* T701 1-445-782-11 DC-DC CONVERTER TRANSFORMER
********************************************************************************
<CAPASITOR>C103 1-100-916-11 CERAMIC CHIP 0.1UF 10% 16VC104 1-100-916-11 CERAMIC CHIP 0.1UF 10% 16VC105 1-100-916-11 CERAMIC CHIP 0.1UF 10% 16VC106 1-100-916-11 CERAMIC CHIP 0.1UF 10% 16VC108 1-100-916-11 CERAMIC CHIP 0.1UF 10% 16V
C109 1-100-916-11 CERAMIC CHIP 0.1UF 10% 16VC110 1-100-916-11 CERAMIC CHIP 0.1UF 10% 16VC111 1-100-916-11 CERAMIC CHIP 0.1UF 10% 16VC112 1-100-916-11 CERAMIC CHIP 0.1UF 10% 16VC113 1-100-916-11 CERAMIC CHIP 0.1UF 10% 16V
C114 1-100-916-11 CERAMIC CHIP 0.1UF 10% 16VC115 1-100-916-11 CERAMIC CHIP 0.1UF 10% 16VC116 1-100-916-11 CERAMIC CHIP 0.1UF 10% 16VC117 1-114-130-11 CERAMIC CHIP 1UF 10% 6.3VC118 1-100-916-11 CERAMIC CHIP 0.1UF 10% 16V
C119 1-100-916-11 CERAMIC CHIP 0.1UF 10% 16VC120 1-100-916-11 CERAMIC CHIP 0.1UF 10% 16VC121 1-100-916-11 CERAMIC CHIP 0.1UF 10% 16VC122 1-100-916-11 CERAMIC CHIP 0.1UF 10% 16VC126 1-100-916-11 CERAMIC CHIP 0.1UF 10% 16V
C128 1-100-909-11 CERAMIC CHIP 10UF 10% 6.3VC129 1-100-916-11 CERAMIC CHIP 0.1UF 10% 16VC131 1-100-916-11 CERAMIC CHIP 0.1UF 10% 16V
C132 1-100-916-11 CERAMIC CHIP 0.1UF 10% 16VC133 1-100-916-11 CERAMIC CHIP 0.1UF 10% 16VC134 1-100-916-11 CERAMIC CHIP 0.1UF 10% 16VC135 1-100-916-11 CERAMIC CHIP 0.1UF 10% 16VC136 1-100-916-11 CERAMIC CHIP 0.1UF 10% 16V
C138 1-100-916-11 CERAMIC CHIP 0.1UF 10% 16VC140 1-100-916-11 CERAMIC CHIP 0.1UF 10% 16VC141 1-100-909-11 CERAMIC CHIP 10UF 10% 6.3VC142 1-100-916-11 CERAMIC CHIP 0.1UF 10% 16VC143 1-112-777-11 CERAMIC CHIP 0.01UF 10% 25V
C144 1-114-130-11 CERAMIC CHIP 1UF 10% 6.3VC145 1-112-777-11 CERAMIC CHIP 0.01UF 10% 25VC147 1-112-777-11 CERAMIC CHIP 0.01UF 10% 25VC148 1-114-130-11 CERAMIC CHIP 1UF 10% 6.3VC150 1-112-777-11 CERAMIC CHIP 0.01UF 10% 25V
C151 1-114-130-11 CERAMIC CHIP 1UF 10% 6.3VC153 1-114-130-11 CERAMIC CHIP 1UF 10% 6.3VC154 1-114-130-11 CERAMIC CHIP 1UF 10% 6.3VC156 1-114-130-11 CERAMIC CHIP 1UF 10% 6.3VC159 1-100-916-11 CERAMIC CHIP 0.1UF 10% 16V
C160 1-100-916-11 CERAMIC CHIP 0.1UF 10% 16VC170 1-100-909-11 CERAMIC CHIP 10UF 10% 6.3VC202 1-100-916-11 CERAMIC CHIP 0.1UF 10% 16VC203 1-100-916-11 CERAMIC CHIP 0.1UF 10% 16VC204 1-100-916-11 CERAMIC CHIP 0.1UF 10% 16V
C206 1-100-916-11 CERAMIC CHIP 0.1UF 10% 16VC207 1-100-916-11 CERAMIC CHIP 0.1UF 10% 16VC211 1-100-916-11 CERAMIC CHIP 0.1UF 10% 16VC214 1-100-909-11 CERAMIC CHIP 10UF 10% 6.3VC215 1-100-916-11 CERAMIC CHIP 0.1UF 10% 16V
C217 1-114-130-11 CERAMIC CHIP 1UF 10% 6.3VC232 1-112-777-11 CERAMIC CHIP 0.01UF 10% 25VC233 1-114-130-11 CERAMIC CHIP 1UF 10% 6.3VC234 1-114-130-11 CERAMIC CHIP 1UF 10% 6.3VC235 1-112-777-11 CERAMIC CHIP 0.01UF 10% 25V
C236 1-112-777-11 CERAMIC CHIP 0.01UF 10% 25VC239 1-112-777-11 CERAMIC CHIP 0.01UF 10% 25VC242 1-114-130-11 CERAMIC CHIP 1UF 10% 6.3VC243 1-114-130-11 CERAMIC CHIP 1UF 10% 6.3VC245 1-114-130-11 CERAMIC CHIP 1UF 10% 6.3V
C246 1-112-777-11 CERAMIC CHIP 0.01UF 10% 25VC247 1-112-777-11 CERAMIC CHIP 0.01UF 10% 25VC259 1-100-909-11 CERAMIC CHIP 10UF 10% 6.3VC306 1-112-298-91 CERAMIC CHIP 1UF 10% 16VC307 1-112-777-11 CERAMIC CHIP 0.01UF 10% 25V
C308 1-112-777-11 CERAMIC CHIP 0.01UF 10% 25VC309 1-165-908-91 CERAMIC CHIP 1UF 10% 10VC310 1-100-909-11 CERAMIC CHIP 10UF 10% 6.3VC311 1-100-966-91 CERAMIC CHIP 10UF 20% 10VC314 1-165-908-91 CERAMIC CHIP 1UF 10% 10V
C317 1-165-908-91 CERAMIC CHIP 1UF 10% 10VC318 1-100-159-91 CERAMIC CHIP 22UF 10% 6.3VC321 1-114-553-11 CERAMIC CHIP 10UF 10% 16VC323 1-112-777-11 CERAMIC CHIP 0.01UF 10% 25VC327 1-165-908-91 CERAMIC CHIP 1UF 10% 10V
C330 1-100-909-11 CERAMIC CHIP 10UF 10% 6.3VC331 1-112-778-11 CERAMIC CHIP 0.022UF 10% 25VC332 1-165-908-91 CERAMIC CHIP 1UF 10% 10VC335 1-165-908-91 CERAMIC CHIP 1UF 10% 10VC336 1-100-916-11 CERAMIC CHIP 0.1UF 10% 16V
C337 1-100-159-91 CERAMIC CHIP 22UF 10% 6.3VC338 1-100-159-91 CERAMIC CHIP 22UF 10% 6.3VC340 1-114-553-11 CERAMIC CHIP 10UF 10% 16VC341 1-114-553-11 CERAMIC CHIP 10UF 10% 16VC343 1-114-553-11 CERAMIC CHIP 10UF 10% 16V
IF170 MB-138
*
A-1797-172-AA-1797-254-AA-1797-288-AA-1797-245-AA-1815-999-A
SERVICE ASSY, MB(BDP-S380:AR,E,US,TW,CND,UK/BX38)SERVICE ASSY, MB(BDP-S380:SP,TH,CH,ME,KS,IND/S383)SERVICE ASSY, MB(BDP-S280:CND,AEP,UK)SERVICE ASSY, MB(BDP-S280:US)SERVICE ASSY, MB(BDP-S280:BR)
BDP-BX38/S280/S380/S383
10-7
Ref-No. Part No. Part Description R e m a r k s Ref-No. Part No. Part Description R e m a r k sC346 1-112-777-11 CERAMIC CHIP 0.01UF 10% 25VC347 1-165-908-91 CERAMIC CHIP 1UF 10% 10VC348 1-114-802-11 CERAMIC CHIP 0.0033UF 10% 50VC349 1-100-916-11 CERAMIC CHIP 0.1UF 10% 16VC350 1-100-916-11 CERAMIC CHIP 0.1UF 10% 16V
C351 1-100-159-91 CERAMIC CHIP 22UF 10% 6.3VC352 1-100-159-91 CERAMIC CHIP 22UF 10% 6.3VC353 1-100-159-91 CERAMIC CHIP 22UF 10% 6.3VC365 1-114-553-11 CERAMIC CHIP 10UF 10% 16V
C366 1-100-916-11 CERAMIC CHIP 0.1UF 10% 16VC367 1-100-905-11 CERAMIC CHIP 0.001UF 10% 50VC369 1-112-777-11 CERAMIC CHIP 0.01UF 10% 25VC371 1-114-553-11 CERAMIC CHIP 10UF 10% 16VC373 1-112-777-11 CERAMIC CHIP 0.01UF 10% 25V
C377 1-165-908-91 CERAMIC CHIP 1UF 10% 10VC379 1-112-777-11 CERAMIC CHIP 0.01UF 10% 25VC381 1-165-908-91 CERAMIC CHIP 1UF 10% 10VC382 1-112-777-11 CERAMIC CHIP 0.01UF 10% 25VC383 1-114-553-11 CERAMIC CHIP 10UF 10% 16V
C403 1-100-916-11 CERAMIC CHIP 0.1UF 10% 16VC405 1-112-777-11 CERAMIC CHIP 0.01UF 10% 25VC415 1-100-909-11 CERAMIC CHIP 10UF 10% 6.3VC417 1-100-916-11 CERAMIC CHIP 0.1UF 10% 16VC422 1-100-916-11 CERAMIC CHIP 0.1UF 10% 16V
C423 1-100-909-11 CERAMIC CHIP 10UF 10% 6.3VC424 1-100-916-11 CERAMIC CHIP 0.1UF 10% 16VC425 1-100-916-11 CERAMIC CHIP 0.1UF 10% 16VC426 1-100-916-11 CERAMIC CHIP 0.1UF 10% 16VC428 1-100-916-11 CERAMIC CHIP 0.1UF 10% 16V
C429 1-100-916-11 CERAMIC CHIP 0.1UF 10% 16VC430 1-100-916-11 CERAMIC CHIP 0.1UF 10% 16VC431 1-100-916-11 CERAMIC CHIP 0.1UF 10% 16VC440 1-100-916-11 CERAMIC CHIP 0.1UF 10% 16VC445 1-100-916-11 CERAMIC CHIP 0.1UF 10% 16V
C446 1-164-850-81 CERAMIC CHIP 10PF 0.50PF 50VC447 1-164-850-81 CERAMIC CHIP 10PF 0.50PF 50VC448 1-100-916-11 CERAMIC CHIP 0.1UF 10% 16VC449 1-100-916-11 CERAMIC CHIP 0.1UF 10% 16VC450 1-100-916-11 CERAMIC CHIP 0.1UF 10% 16V
C452 1-100-916-11 CERAMIC CHIP 0.1UF 10% 16VC454 1-100-916-11 CERAMIC CHIP 0.1UF 10% 16VC456 1-100-916-11 CERAMIC CHIP 0.1UF 10% 16VC504 1-100-916-11 CERAMIC CHIP 0.1UF 10% 16VC605 1-165-908-91 CERAMIC CHIP 1UF 10% 10V
C606 1-100-909-11 CERAMIC CHIP 10UF 10% 6.3VC608 1-100-909-11 CERAMIC CHIP 10UF 10% 6.3VC611 1-165-908-91 CERAMIC CHIP 1UF 10% 10V
(BDP-BX38/S280:EXCEPT UK/S380:EXCEPT US)C616 1-128-394-21 ELECT CHIP 220UF 20% 10V
(BDP-BX38/S280:EXCEPT UK/S380:EXCEPT US)C617 1-165-908-91 CERAMIC CHIP 1UF 10% 10VC619 1-165-908-91 CERAMIC CHIP 1UF 10% 10VC620 1-128-394-21 ELECT CHIP 220UF 20% 10VC625 1-164-850-81 CERAMIC CHIP 10PF 0.50PF 50VC628 1-164-850-81 CERAMIC CHIP 10PF 0.50PF 50V
C631 1-100-966-91 CERAMIC CHIP 10UF 20% 10VC632 1-100-966-91 CERAMIC CHIP 10UF 20% 10V
(BDP-BX38/S280:EXCEPT UK/S380:EXCEPT US)C702 1-100-916-11 CERAMIC CHIP 0.1UF 10% 16V
C713 1-115-467-91 CERAMIC CHIP 0.22UF 10.00% 10VC715 1-115-467-91 CERAMIC CHIP 0.22UF 10.00% 10VC716 1-112-777-11 CERAMIC CHIP 0.01UF 10% 25V
C717 1-115-467-91 CERAMIC CHIP 0.22UF 10.00% 10VC719 1-112-777-11 CERAMIC CHIP 0.01UF 10% 25VC720 1-115-467-91 CERAMIC CHIP 0.22UF 10.00% 10VC723 1-100-916-11 CERAMIC CHIP 0.1UF 10% 16VC801 1-100-916-11 CERAMIC CHIP 0.1UF 10% 16V
C808 1-114-130-11 CERAMIC CHIP 1UF 10% 6.3VC809 1-114-130-11 CERAMIC CHIP 1UF 10% 6.3VC810 1-100-916-11 CERAMIC CHIP 0.1UF 10% 16VC811 1-100-916-11 CERAMIC CHIP 0.1UF 10% 16VC827 1-100-916-11 CERAMIC CHIP 0.1UF 10% 16V
C902 1-165-908-91 CERAMIC CHIP 1UF 10% 10VC903 1-165-908-91 CERAMIC CHIP 1UF 10% 10VC904 1-100-909-11 CERAMIC CHIP 10UF 10% 6.3VC914 1-164-882-81 CERAMIC CHIP 220PF 5.00% 16VC915 1-164-882-81 CERAMIC CHIP 220PF 5.00% 16V
C918 1-100-916-11 CERAMIC CHIP 0.1UF 10% 16VC922 1-100-909-11 CERAMIC CHIP 10UF 10% 6.3VC923 1-165-908-91 CERAMIC CHIP 1UF 10% 10VC924 1-100-740-81 CERAMIC CHIP 390PF 5% 50VC925 1-100-740-81 CERAMIC CHIP 390PF 5% 50V
C928 1-164-882-81 CERAMIC CHIP 220PF 5.00% 16VC929 1-164-882-81 CERAMIC CHIP 220PF 5.00% 16VC1001 1-128-994-21 ELECT CHIP 47UF 20% 10VC1002 1-100-916-11 CERAMIC CHIP 0.1UF 10% 16VC1012 1-100-916-11 CERAMIC CHIP 0.1UF 10% 16V
C1014 1-128-994-21 ELECT CHIP 47UF 20% 10VC1017 1-100-966-91 CERAMIC CHIP 10UF 20% 10VC1022 1-100-916-11 CERAMIC CHIP 0.1UF 10% 16VC1023 1-100-916-11 CERAMIC CHIP 0.1UF 10% 16V
C1024 1-114-130-11 CERAMIC CHIP 1UF 10% 6.3VC1025 1-114-130-11 CERAMIC CHIP 1UF 10% 6.3VC1208 1-100-916-11 CERAMIC CHIP 0.1UF 10% 16VC1209 1-100-916-11 CERAMIC CHIP 0.1UF 10% 16VC1210 1-100-916-11 CERAMIC CHIP 0.1UF 10% 16V
C1213 1-100-916-11 CERAMIC CHIP 0.1UF 10% 16VC1214 1-100-916-11 CERAMIC CHIP 0.1UF 10% 16VC1215 1-100-916-11 CERAMIC CHIP 0.1UF 10% 16VC1216 1-100-916-11 CERAMIC CHIP 0.1UF 10% 16VC1218 1-112-777-11 CERAMIC CHIP 0.01UF 10% 25V
C1219 1-100-916-11 CERAMIC CHIP 0.1UF 10% 16VC1229 1-100-909-11 CERAMIC CHIP 10UF 10% 6.3VC1301 1-100-916-11 CERAMIC CHIP 0.1UF 10% 16VC1302 1-100-905-11 CERAMIC CHIP 0. 001UF 10% 50VC1305 1-100-916-11 CERAMIC CHIP 0.1UF 10% 16V
C1306 1-100-905-11 CERAMIC CHIP 0. 001UF 10% 50VC1310 1-100-916-11 CERAMIC CHIP 0.1UF 10% 16VC1312 1-100-916-11 CERAMIC CHIP 0.1UF 10% 16VC1318 1-100-916-11 CERAMIC CHIP 0.1UF 10% 16VC1322 1-100-916-11 CERAMIC CHIP 0.1UF 10% 16V
C1323 1-100-916-11 CERAMIC CHIP 0.1UF 10% 16VC1325 1-100-916-11 CERAMIC CHIP 0.1UF 10% 16VC1326 1-100-916-11 CERAMIC CHIP 0.1UF 10% 16VC1329 1-100-916-11 CERAMIC CHIP 0.1UF 10% 16VC1334 1-100-916-11 CERAMIC CHIP 0.1UF 10% 16V
MB-138
BDP-BX38/S280/S380/S383
10-8
Ref-No. Part No. Part Description R e m a r k s Ref-No. Part No. Part Description R e m a r k s
C1357 1-137-765-21 ELECT CHIP 47UF 20% 16VC1362 1-112-298-91 CERAMIC CHIP 1UF 10% 16VC1363 1-100-916-11 CERAMIC CHIP 0.1UF 10% 16VC1365 1-112-298-91 CERAMIC CHIP 1UF 10% 16VC1366 1-100-916-11 CERAMIC CHIP 0.1UF 10% 16V
C1373 1-112-777-11 CERAMIC CHIP 0.01UF 10% 25VC1374 1-112-298-91 CERAMIC CHIP 1UF 10% 16VC1375 1-112-777-11 CERAMIC CHIP 0.01UF 10% 25VC1376 1-112-298-91 CERAMIC CHIP 1UF 10% 16VC1377 1-112-777-11 CERAMIC CHIP 0.01UF 10% 25VC1378 1-112-777-11 CERAMIC CHIP 0.01UF 10% 25V
C1390 1-100-916-11 CERAMIC CHIP 0.1UF 10% 16VC1400 1-112-777-11 CERAMIC CHIP 0.01UF 10% 25VC1405 1-117-681-21 ELECT CHIP 100UF 20.00% 16VC1412 1-117-681-21 ELECT CHIP 100UF 20.00% 16VC1414 1-112-777-11 CERAMIC CHIP 0.01UF 10% 25VC1464 1-112-298-91 CERAMIC CHIP 1UF 10% 16V
C2400 1-112-777-11 CERAMIC CHIP 0.01UF 10% 25VC2401 1-100-916-11 CERAMIC CHIP 0.1UF 10% 16VC2402 1-100-916-11 CERAMIC CHIP 0.1UF 10% 16VC2404 1-112-298-91 CERAMIC CHIP 1UF 10% 16VC2405 1-117-681-21 ELECT CHIP 100UF 20.00% 16VC2406 1-112-777-11 CERAMIC CHIP 0.01UF 10% 25V
C2412 1-117-681-21 ELECT CHIP 100UF 20.00% 16VC2426 1-112-777-11 CERAMIC CHIP 0.01UF 10% 25VC2432 1-112-777-11 CERAMIC CHIP 0.01UF 10% 25VC2433 1-112-777-11 CERAMIC CHIP 0.01UF 10% 25VC2438 1-112-298-91 CERAMIC CHIP 1UF 10% 16VC2439 1-112-777-11 CERAMIC CHIP 0.01UF 10% 25V
C2440 1-100-916-11 CERAMIC CHIP 0.1UF 10% 16VC2441 1-112-777-11 CERAMIC CHIP 0.01UF 10% 25VC2450 1-100-916-11 CERAMIC CHIP 0.1UF 10% 16VC2454 1-112-298-91 CERAMIC CHIP 1UF 10% 16VC2460 1-100-916-11 CERAMIC CHIP 0.1UF 10% 16VC2470 1-100-916-11 CERAMIC CHIP 0.1UF 10% 16V
C2481 1-112-298-91 CERAMIC CHIP 1UF 10% 16VC2486 1-112-298-91 CERAMIC CHIP 1UF 10% 16VC2495 1-112-298-91 CERAMIC CHIP 1UF 10% 16V
<CONNECTOR>CN301 1-506-472-11 PIN, CONNECTOR 7PCN604 1-820-034-11 CONNECTOR, USB (A)CN701 1-821-398-21 HDMI CONNECTORCN801 1-819-875-31 ETHERNET CONNECTOR (8P)
CN1102 1-573-806-21 PIN, CONNECTOR (1.5MM) (SMD)6PCN1202 1-764-177-21 PIN, CONNECTOR (SMD)(1.5MM) 7PCN1203 1-695-320-21 PIN, CONNECTOR (1.5MM)(SMD) 2PCN1204 1-820-121-51 CONNECTOR, FFC/FPC 23PCN1301 1-822-601-51 CONNECTOR, FFC/FPC (ZIF) 45P
<DIODE>D302 6-502-966-01 DI DZ2J056M0LD303 6-502-248-01 DI KDZTR3.9BD304 6-502-248-01 DI KDZTR3.9BD312 6-502-966-01 DI DZ2J056M0LD601 6-502-961-01 DI DA2J10100L
(BDP-BX38/S280:EXCEPT UK/S380:EXCEPT US)
D602 6-502-961-01 DI DA2J10100L
<FERRITE BEAD>
FB703 1-469-112-21 FERRITE 0UHFB704 1-469-112-21 FERRITE 0UHFB705 1-469-112-21 FERRITE 0UHFB706 1-469-112-21 FERRITE 0UHFB707 1-469-112-21 FERRITE 0UH
FB1361 1-216-864-91 SHORT CHIP 0FB1365 1-216-864-91 SHORT CHIP 0FB1371 1-216-864-91 SHORT CHIP 0FB1380 1-216-864-91 SHORT CHIP 0FB1390 1-216-864-91 SHORT CHIP 0
FB1399 1-216-864-91 SHORT CHIP 0FB1400 1-244-161-81 METAL CHIP 2.2 5% 1/16WFB1450 1-216-295-91 SHORT CHIP 0FB1454 1-216-295-91 SHORT CHIP 0FB1456 1-216-295-91 SHORT CHIP 0
FB1458 1-216-295-91 SHORT CHIP 0FB1460 1-216-295-91 SHORT CHIP 0FB1462 1-216-295-91 SHORT CHIP 0FB1466 1-216-295-91 SHORT CHIP 0FB2400 1-244-161-81 METAL CHIP 2.2 5% 1/16W
<FILTER>FL301 1-234-939-21 FILTER, EMI REMOVAL (SMD)FL302 1-234-939-21 FILTER, EMI REMOVAL (SMD)
<IC>IC106 6-716-695-01 IC K4B1G1646E-HCH9TIC107 6-716-695-01 IC K4B1G1646E-HCH9TIC206 6-716-695-01 IC K4B1G1646E-HCH9TIC301 6-705-312-01 IC S-T111B33MC-OGSTFGIC302 6-716-781-01 IC RT8252ALGSP
IC303 6-705-313-01 IC S-T111B50MC-OHJTFGIC305 6-705-312-01 IC S-T111B33MC-OGSTFGIC306 6-702-302-01 IC TK11133CSCL-GIC308 6-714-935-01 IC TPS54225PWPRIC309 6-714-890-01 IC MM1855AHBE
IC501 6-710-563-01 IC K9F2G08U0A-PCBOTIC601 6-716-739-01 IC BD00GC0WEFJ-SE2IC603 6-716-739-01 IC BD00GC0WEFJ-SE2IC704 6-702-302-01 IC TK11133CSCL-GIC705 6-705-337-01 IC TK11150CSCL-G
IC907 6-716-753-01 IC NJU72010RB2-TE2IC1003 6-716-592-01 IC BH76071FJ-E2IC1203 6-716-778-01 IC R5F21357CN101FPIC1361 6-716-786-01 IC MM1685YNREIC1401 6-714-902-01 IC TPIC1391DBTRG4
IC2401 6-716-779-01 IC TPIC1405ADFDRG4
<PIN JACK>J901 1-842-473-11 PIN JACK BLOCK 7P
<INDUCTOR>L302 1-400-789-21 INDUCTOR 2.2UHL305 1-400-789-21 INDUCTOR 2.2UHL306 1-400-789-21 INDUCTOR 2.2UHL308 1-400-788-21 INDUCTOR 1UH
<FUSE>PS301 1-523-134-31 FUSE 2A 50VPS302 1-523-135-31 FUSE 3.15A 32VPS1201 1-523-130-31 FUSE 0.5A 50V
MB-138
*
*
**
*
*
*
*
*
BDP-BX38/S280/S380/S383
10-9
Ref-No. Part No. Part Description R e m a r k s Ref-No. Part No. Part Description R e m a r k s<TRANSISTOR>
Q301 6-552-430-01 TR DRC5114E0LQ302 6-551-184-01 TRANSISTOR MCH6305-TL-E-SQ303 6-552-430-01 TR DRC5114E0LQ304 6-552-430-01 TR DRC5114E0LQ305 6-552-430-01 TR DRC5114E0L
Q702 6-551-714-01 TRANSISTOR INK0001AC1-T112A-1Q901 6-552-430-01 TR DRC5114E0L
<RESISTOR>R102 1-208-887-81 METAL CHIP 1K 0.5% 1/16WR103 1-208-887-81 METAL CHIP 1K 0.5% 1/16WR106 1-218-941-81 METAL CHIP 100 5% 1/16WR107 1-218-941-81 METAL CHIP 100 5% 1/16WR108 1-208-872-81 METAL CHIP 240 0.5% 1/16W
R109 1-208-872-81 METAL CHIP 240 0.5% 1/16WR110 1-216-864-91 SHORT CHIP 0R206 1-218-941-81 METAL CHIP 100 5% 1/16WR207 1-208-872-81 METAL CHIP 240 0.5% 1/16WR302 1-218-977-81 METAL CHIP 100K 5% 1/16W
R303 1-208-919-81 METAL CHIP 22K 0.5% 1/16WR304 1-218-953-81 METAL CHIP 1K 5% 1/16WR305 1-218-953-81 METAL CHIP 1K 5% 1/16WR307 1-218-953-81 METAL CHIP 1K 5% 1/16WR309 1-218-953-81 METAL CHIP 1K 5% 1/16W
R316 1-218-990-81 SHORT CHIP 0R321 1-208-923-81 METAL CHIP 33K 0.5% 1/16WR322 1-208-909-81 METAL CHIP 8.2K 0.5% 1/16WR323 1-208-881-81 METAL CHIP 560 0.5% 1/16WR327 1-218-953-81 METAL CHIP 1K 5% 1/16W
R330 1-208-899-81 METAL CHIP 3.3K 0.5% 1/16WR331 1-208-911-81 METAL CHIP 10K 0.5% 1/16WR332 1-208-891-81 METAL CHIP 1.5K 0.5% 1/16WR333 1-208-899-81 METAL CHIP 3.3K 0.5% 1/16WR334 1-208-899-81 METAL CHIP 3.3K 0.5% 1/16WR335 1-208-859-81 METAL CHIP 68 0.5% 1/16W
R336 1-218-967-81 METAL CHIP 15K 5% 1/16WR337 1-218-953-81 METAL CHIP 1K 5% 1/16WR339 1-218-990-81 SHORT CHIP 0R340 1-218-953-81 METAL CHIP 1K 5% 1/16WR343 1-218-953-81 METAL CHIP 1K 5% 1/16W
R345 1-218-990-81 SHORT CHIP 0R346 1-218-990-81 SHORT CHIP 0R347 1-218-967-81 METAL CHIP 15K 5% 1/16WR350 1-208-929-81 METAL CHIP 56K 0.5% 1/16WR351 1-208-911-81 METAL CHIP 10K 0.5% 1/16W
R352 1-208-871-81 METAL CHIP 220 0.5% 1/16WR362 1-216-825-91 METAL CHIP 2.2K 5% 1/10WR363 1-216-825-91 METAL CHIP 2.2K 5% 1/10WR370 1-208-891-81 METAL CHIP 1.5K 0.5% 1/16WR371 1-218-957-81 METAL CHIP 2.2K 5% 1/16W
R374 1-218-971-81 METAL CHIP 33K 5% 1/16WR375 1-218-971-81 METAL CHIP 33K 5% 1/16WR376 1-218-953-81 METAL CHIP 1K 5% 1/16WR404 1-218-952-81 METAL CHIP 820 5% 1/16WR405 1-218-977-81 METAL CHIP 100K 5% 1/16W
R406 1-216-864-91 SHORT CHIP 0R508 1-218-990-81 SHORT CHIP 0R518 1-218-990-81 SHORT CHIP 0
R523 1-208-899-81 METAL CHIP 3.3K 0.5% 1/16WR602 1-218-990-81 SHORT CHIP 0
(BDP-BX38/S280:EXCEPT UK/S380:EXCEPT US)R603 1-216-864-91 SHORT CHIP 0R604 1-218-990-81 SHORT CHIP 0
(BDP-BX38/S280:EXCEPT UK/S380:EXCEPT US)R605 1-208-921-81 METAL CHIP 27K 0.5% 1/16W
(BDP-BX38/S280:EXCEPT UK/S380:EXCEPT US)
R606 1-208-921-81 METAL CHIP 27K 0.5% 1/16W(BDP-BX38/S280:EXCEPT UK/S380:EXCEPT US)
R607 1-208-911-81 METAL CHIP 10K 0.5% 1/16W(BDP-BX38/S280:EXCEPT UK/S380:EXCEPT US)
R609 1-208-904-81 METAL CHIP 5.1K 0.5% 1/16W(BDP-BX38/S280:EXCEPT UK/S380:EXCEPT US)
R610 1-208-904-81 METAL CHIP 5.1K 0.5% 1/16WR611 1-218-965-81 METAL CHIP 10K 5% 1/16W
(BDP-BX38/S280:EXCEPT UK/S380:EXCEPT US)
R612 1-208-921-81 METAL CHIP 27K 0.5% 1/16WR613 1-208-921-81 METAL CHIP 27K 0.5% 1/16WR614 1-208-911-81 METAL CHIP 10K 0.5% 1/16WR616 1-218-965-81 METAL CHIP 10K 5% 1/16WR617 1-218-990-81 SHORT CHIP 0
R618 1-218-990-81 SHORT CHIP 0R702 1-208-887-81 METAL CHIP 1K 0.5% 1/16WR703 1-208-891-81 METAL CHIP 1.5K 0.5% 1/16WR720 1-218-990-81 SHORT CHIP 0R727 1-218-990-81 SHORT CHIP 0
R730 1-218-973-81 METAL CHIP 47K 5% 1/16WR734 1-218-965-81 METAL CHIP 10K 5% 1/16WR735 1-218-956-81 METAL CHIP 1.8K 5% 1/16WR736 1-218-956-81 METAL CHIP 1.8K 5% 1/16WR738 1-218-965-81 METAL CHIP 10K 5% 1/16W
R755 1-208-919-81 METAL CHIP 22K 0.5% 1/16WR756 1-208-919-81 METAL CHIP 22K 0.5% 1/16WR765 1-218-990-81 SHORT CHIP 0R766 1-218-990-81 SHORT CHIP 0R767 1-218-990-81 SHORT CHIP 0
R768 1-218-990-81 SHORT CHIP 0R769 1-218-990-81 SHORT CHIP 0R770 1-218-990-81 SHORT CHIP 0R771 1-218-990-81 SHORT CHIP 0R772 1-218-990-81 SHORT CHIP 0
R801 1-218-990-81 SHORT CHIP 0R802 1-218-990-81 SHORT CHIP 0R803 1-218-990-81 SHORT CHIP 0R804 1-218-990-81 SHORT CHIP 0R806 1-208-920-81 METAL CHIP 24K 0.5% 1/16W
R906 1-208-919-81 METAL CHIP 22K 0.5% 1/16WR907 1-208-919-81 METAL CHIP 22K 0.5% 1/16WR914 1-218-973-81 METAL CHIP 47K 5% 1/16WR915 1-218-973-81 METAL CHIP 47K 5% 1/16WR916 1-208-879-81 METAL CHIP 470 0.5% 1/16W
R917 1-208-879-81 METAL CHIP 470 0.5% 1/16WR922 1-218-941-81 METAL CHIP 100 5% 1/16WR932 1-218-990-81 SHORT CHIP 0R933 1-218-990-81 SHORT CHIP 0R938 1-218-965-81 METAL CHIP 10K 5% 1/16W
R940 1-218-990-81 SHORT CHIP 0
MB-138
BDP-BX38/S280/S380/S383
10-10E
Ref-No. Part No. Part Description R e m a r k s Ref-No. Part No. Part Description R e m a r k s
R949 1-218-990-81 SHORT CHIP 0R1005 1-208-881-81 METAL CHIP 560 0.5% 1/16WR1007 1-208-867-81 METAL CHIP 150 0.5% 1/16WR1008 1-208-867-81 METAL CHIP 150 0.5% 1/16WR1009 1-208-867-81 METAL CHIP 150 0.5% 1/16W
R1012 1-208-867-81 METAL CHIP 150 0.5% 1/16WR1028 1-220-169-81 METAL CHIP 75 5% 1/16WR1029 1-220-169-81 METAL CHIP 75 5% 1/16WR1030 1-220-169-81 METAL CHIP 75 5% 1/16WR1031 1-220-169-81 METAL CHIP 75 5% 1/16W
R1032 1-218-990-81 SHORT CHIP 0R1033 1-218-990-81 SHORT CHIP 0R1034 1-218-990-81 SHORT CHIP 0R1035 1-218-990-81 SHORT CHIP 0R1043 1-218-990-81 SHORT CHIP 0
R1044 1-218-990-81 SHORT CHIP 0R1045 1-218-990-81 SHORT CHIP 0R1046 1-218-990-81 SHORT CHIP 0R1110 1-218-965-81 METAL CHIP 10K 5% 1/16WR1127 1-218-941-81 METAL CHIP 100 5% 1/16W
R1130 1-218-990-81 SHORT CHIP 0R1138 1-218-965-81 METAL CHIP 10K 5% 1/16WR1142 1-218-965-81 METAL CHIP 10K 5% 1/16WR1143 1-218-965-81 METAL CHIP 10K 5% 1/16WR1144 1-218-965-81 METAL CHIP 10K 5% 1/16W
R1146 1-218-965-81 METAL CHIP 10K 5% 1/16WR1148 1-218-965-81 METAL CHIP 10K 5% 1/16WR1150 1-218-965-81 METAL CHIP 10K 5% 1/16WR1156 1-218-990-81 SHORT CHIP 0R1160 1-218-990-81 SHORT CHIP 0
R1169 1-218-965-81 METAL CHIP 10K 5% 1/16WR1189 1-218-977-81 METAL CHIP 100K 5% 1/16WR1192 1-218-965-81 METAL CHIP 10K 5% 1/16WR1194 1-218-965-81 METAL CHIP 10K 5% 1/16WR1195 1-218-990-81 SHORT CHIP 0
R1198 1-218-965-81 METAL CHIP 10K 5% 1/16WR1199 1-218-965-81 METAL CHIP 10K 5% 1/16WR1202 1-218-941-81 METAL CHIP 100 5% 1/16WR1206 1-208-921-81 METAL CHIP 27K 0.5% 1/16WR1208 1-218-965-81 METAL CHIP 10K 5% 1/16WR1209 1-218-965-81 METAL CHIP 10K 5% 1/16W
R1212 1-218-981-81 METAL CHIP 220K 5% 1/16WR1213 1-218-965-81 METAL CHIP 10K 5% 1/16WR1220 1-218-961-81 METAL CHIP 4.7K 5% 1/16WR1221 1-218-941-81 METAL CHIP 100 5% 1/16WR1224 1-218-965-81 METAL CHIP 10K 5% 1/16WR1233 1-218-941-81 METAL CHIP 100 5% 1/16W
R1234 1-218-941-81 METAL CHIP 100 5% 1/16WR1235 1-218-977-81 METAL CHIP 100K 5% 1/16WR1236 1-218-977-81 METAL CHIP 100K 5% 1/16WR1240 1-218-941-81 METAL CHIP 100 5% 1/16WR1242 1-218-941-81 METAL CHIP 100 5% 1/16W
R1243 1-218-965-81 METAL CHIP 10K 5% 1/16WR1244 1-218-977-81 METAL CHIP 100K 5% 1/16WR1246 1-218-965-81 METAL CHIP 10K 5% 1/16WR1250 1-218-965-81 METAL CHIP 10K 5% 1/16WR1251 1-218-977-81 METAL CHIP 100K 5% 1/16W
R1256 1-208-897-81 METAL CHIP 2.7K 0.5% 1/16WR1261 1-218-965-81 METAL CHIP 10K 5% 1/16WR1262 1-218-977-81 METAL CHIP 100K 5% 1/16WR1263 1-218-977-81 METAL CHIP 100K 5% 1/16WR1264 1-218-981-81 METAL CHIP 220K 5% 1/16W
R1300 1-208-920-81 METAL CHIP 24K 0.5% 1/16WR1310 1-218-957-81 METAL CHIP 2.2K 5% 1/16WR1312 1-218-961-81 METAL CHIP 4.7K 5% 1/16WR1334 1-208-911-81 METAL CHIP 10K 0.5% 1/16WR1345 1-218-990-81 SHORT CHIP 0
R1363 1-218-965-81 METAL CHIP 10K 5% 1/16WR1386 1-218-965-81 METAL CHIP 10K 5% 1/16WR1391 1-218-953-81 METAL CHIP 1K 5% 1/16WR1392 1-218-954-81 METAL CHIP 1.2K 5% 1/16WR1398 1-218-990-81 SHORT CHIP 0
R1407 1-218-973-81 METAL CHIP 47K 5% 1/16WR1412 1-218-973-81 METAL CHIP 47K 5% 1/16WR2411 1-218-973-81 METAL CHIP 47K 5% 1/16WR2442 1-218-853-91 METAL CHIP 1.8K 0.5% 1/10WR2444 1-218-853-91 METAL CHIP 1.8K 0.5% 1/10W
R2446 1-218-853-91 METAL CHIP 1.8K 0.5% 1/10WR2447 1-248-476-11 RES-CHIP 0.16 1% 1/3WR2492 1-218-853-91 METAL CHIP 1.8K 0.5% 1/10WR2494 1-218-853-91 METAL CHIP 1.8K 0.5% 1/10WR2496 1-218-853-91 METAL CHIP 1.8K 0.5% 1/10W
<VARIABLE RESISTOR>RB1101 1-234-378-21 RES, NETWORK 10K (1005X4)RB1102 1-234-378-21 RES, NETWORK 10K (1005X4)RB1201 1-234-372-21 RES, NETWORK 100 (1005X4)RB1202 1-234-378-21 RES, NETWORK 10K (1005X4)
<THERMISTOR>TH1201 1-804-949-11 THERMISTOR, NTC (SMD)
MB-138