Machine specification Catalog :1.Pick & Place machine2. Auto Insertion Machine3. Board Handling System4. Screen Printer5. Reflow Oven6. Wave Solder7. Peripheral devices8.SMT whole line solution
*Support customized solutions .*To provide professional solutions of AI/SMT and SMT peripheral equipment and machine accessories.
www.smthelp.com
1. Pick & Place machine*S-1200-SV Pick& Place machine*S-600-L Pick& Place machine*S-EF30000 Pick& Place machine*S-E20000 Pick& Place machine*S-320 Pick& Place machine*S-K100 Pick& Place machine
www.smthelp.com
Dimension :2000（L）×1150（W）×1400（H）mm
PCB length : Max. 1200 mm
PCB width :Max.325mm
Accuracy : 0.1mm
Movement accuracy : 0.02mm
Speed : 35000 CPH
Power supply: AC220V , 50HZ
Power consumption : 2.0KW
Air pressure:0.55MPA
Positing:Visual identification mark
Weight :Approx.1250KG
S-1200-SV Pick& Place machine
www.smthelp.com
1) With Six groups nozzle, can be place up to 30pcs Feeder.2) Available PCB Size: Max. 400mm*360mm; Min. 50*50mm, suit for variety of PCB.3) PCB Thickness: 0.5-3.0mm4) Equipped with variety of nozzles, replace the nozzle by manual.
5) Components available: Different types of SMDs from 0402 to 15mm *15mm, including resistors, capacitors, inductors, diodes/triodes, IC, SOTs, SOPs, QFPs and CSPs.6) Highly Efficiency: 25,000 CPH Spec Speed .7) Number of Mounting Head: 6 head8) Number of Feeder: 30 pcs.9) Windows XP operation system, LED Monitor.10) Machine vision caliberation systems.11) Air Source: 0.55MPA12) Power Supply: Single Phase 220V, 50Hz 2.0KW13) Dimension: 1300*1380*1790mm (L*W*H) 14) Net Weight: 1050KG
S-600-L Pick& Place machine
www.smthelp.com
Machine Dimension :L2000 *W1150 *H1400mm
Weight:Approx.950Kg
PCB Length:1200mm
PCB Width:310mm
Accuracy:0.1mm
PCB thickness：0.5-3.0mm
Kinematic Accuracy：0.01mm
Maximum Speed：36000CPH
Power Supply: AC 220V 50HZ
Power Consumption:2.2KW
Air Pressure ：0.55MPA
Positioning：VisionSystem
Feeder station : 16
Spindles : 8
Flex PCB: Yes
Visual identification : High resolution digital camera
S-EF30000 Pick& Place machine
www.smthelp.com
Placement Number of Placement Heads:6Maximum Placement Speed: 28,000 cphAverage Practical Placement Speed: 20,000 cphPlacement Accuracy: ±0.1mmMinimum LED Size: 1.6 mm × 0.8 mm (0.06 in × 0.03 in)Maximum LED Size: 7.4 mm × 7.4 mm × 6 mm (0.29" × 0.29" × 0.24") Alignment Method: Bottom vision standardCapability for Other SMDs: IC < 15 mm × 12 mm (0.59" × 0.47", pitch > 0.5mm), Resistor, Capacitor, Inductor, Diode, Audion, Transistor, SOT, SOP, QFP, QFN, CSP, and etc.Board Handling Board Handling Method: Magnetic fixture worktableMaximum Board Length: 1200 mm (47.2") standard; 1500 mm (59.1") optionalMaximum Board Width:310 mm (12.2")Board Thickness:0.5 mm to 3.0 mm (0.02" to 0.12")Fiducial Recognition/Coordinate Correction: YesFeeder CapacityFeeder Type:PneumaticMaximum No. of Feeder Ports: 14Tape Feeder Sizes: 8, 12, 16 and 24 mmPhysicalOverall Dimensions (L x W x H): 2000 x 960 x 1350 mmApproximate Net Weight: 850 KgFacility RequirementsStandard Voltage: 220 V - Single Phase, 50HzAir Pressure: 0.6MPa (6.0kgf/cm2)
S-E20000 Pick& Place machine
www.smthelp.com
-The largest patch speed ：38000 CPH（ 0.095 SEC/CHIP ）-Voltage：220 V-Frequency： 50Hz -Compressed air ：0.55 Mpa-Dimension： (L * W * H) 2000 * 970 * 1350 mm.-Weight：About 1500 kg -PC： Windows 2000 / XP or higher
--The independent research and development of software, permanent free update. --Can design according to customer demand changes to the software to meet diversified operation needs (Other modified fee). --Production type： LED fluorescent tube, soft light, module, display screen and other LED application products--Product features ：Achieve a variety of surface type LED, high-power LED and SMT electronic originals, fully automatic SMT
S-320 Pick& Place machine
www.smthelp.com
Real Speed: 100,000-120,000 CPH
PCB Length: 1200mm
T8 LED Light
S-K100 Pick& Place machine
www.smthelp.com
PartsS-K100 LED Pick & Place
Parameter Advantage
Mounting Head Principle motor (Magnetic)
Double Arm, 36 pcs nozzle (18 pcs nozzle per arm)
Group getting, Group Mounting. Left and Right arms are alternately Mounting, and can be controlled independently
Mounting Range 0603,0805,1206,2835,3014,3528,5050,5630,5730,RGB and other LED belt light Mounting LED
Min Mounting Distance 13.5mm High efficiency, also can deal with small distance of PCB
PCB Position CCD Vision, Mark Correction PCB Precise positioning, ensure Mounting quality
PCB Conveyor Speed 320MM/S Quickly conveyor, save time, improve the efficiency.
Direction Front→→Rear, Rear→→Front Flexible choice
Mounting Accuracy +-0.02MM High accuracy mounting, ensure mounting quality
Theory Mounting Speed 140K CPHHigh capacity, save production cost, ensure shipment
Working Mounting Speed 120K CPH
Rail Size 13000MM(L)-300mm（W)
Special design for LED light, LED display, LED Panel lightPCB Size 12000MM(L)-300mm（W)
PCB Thickness 0.5mm-5.0mm
LED High Speed Pick And Place S-K100
www.smthelp.com
LED High Speed Pick And Place S-K100
PartsS-K100 LED Pick & Place
Parameter Advantage
FEEDER Qty 36 pcs Suit for large quantities production
Power Supply 220AC Universal
Max. Power 3.0KVA Low consumption power, save power cost
Air Pressure 5kg Low air consumption, save air cost
Machine Dimension
L：2650mm
Special company design, Convenient for carry the machine and save factory space
W：1850mm
H：1350mm
Weight 2000kg
Operator 1 person Save works Salary
www.smthelp.com
2. Auto Insertion Machine
* Radial/Axial insertion Machine *Odd Form Insertion Machine
www.smthelp.com
Insertion Rate 18,000 pcs/hr (can enhance the speed by upgrading the software)
Non Performing Rate
Less than 1000PPM
Insert Theta 0° to 360°，increment of 1°.Component Span Dual span 2.5mm/5.0mmPCB size Min-50mm*50mm,Max-450mm*450mmPCB thickness 0.79-2.36mmComponent Specs Max Body height 20mm &max body diameter
10mm,max lead diameter 0.8mmComponent types Radial tape packed material such as
capacitor, transistor, triode, LED light, key switch, resistor,connector, coil, potentiometer, fuse socket, blown fuse, etc.
SP-1008 Auto Screen PrinterRepeat position accuracy:±0.01mmPrinting accuracy :±0.025mmCycle time: <9s (Exclude Printing & Cleaning)Products changeover:<5minScreen stencil size: Min 470*370mm , Max 737*737mm , Thickness 20-40mmPCB size: Max 400*310mm ; Min 50*50mm ;Thickness 20-40mmPCB warpage Ratio:<1% (Diagonal length as a benchmark)Bottom of board size: 10mmEdge of board size:3mmTransport high : 900±40mmTransport Direction : L to R ,R to L, R to R , L to LTransport Speed :100-1500mm/sec (programmable control)Board Location: Support system/ Clamping SystemPrint head : Straight association motor control knife pressure blade , pressure size setting of freedomScraper speed :10-150mm/secScraper pressure: 0-15 kgScraper angle: 60°(Standard)/55°/45°Scraper type: Steel scraper(others can be customed)Stencil separation speed: 0.01-10mm/secCleaning method : Dry , wet or vacuum cleaning (programmable any combination)Table adjustment range: X:±4mm;Y:±6mm;θ：±2°Image datum point type : Standard geometric datum, Welding plate/opening holeAir pressure: 4-6kg/cm2Air consumption:Approx. 0.07m3/minControl method: PC controlPower supply : AC:220±10%,50/60Hz 1Ф2.5KWMachine dimension: 1400*1200*1450mm(L*W*H)Weight:Approx:1000kgOperation tempreature: -20℃to+45℃Operation Humidity：30%-60%
www.smthelp.com
5. Reflow Oven
www.smthelp.com
Lead Free Reflow Oven S-6600
Dimension (L*W*H)mm ：3600x720x1250Standard Color： Computer GreyWeight： Approx.420KGNumber Of Heating Zones：Up6/Bottom6Length Of Heating Zones：2300mmNumber of Cooling Zones：1Length of Cooling Zones： 1Exhaust Volume 10M3/minx2：ExhaustsControl System： InstrumentsComputer：（Optional）Siemens PLC：StandardElectric Supply Required： 3phase,380V 50/60HzPower For Warm Up ：15KWPower Consumption： 5KWWarming Time： Approx.20 minuteTemp. Setting Range： Room Temp.-- 300℃Cooling Method： Air fan
S-6600-PC
www.smthelp.com
Model:S-TO4000Heating partHeating zone number:5Heating length:2500mmHeating method:Infrared heatingTransport partMesh width:800mmTransport direction:L to RTransport height:30-150mmTransport method:MeshTransport speed:1-3cm/minMesh load-bearing:100KGControl partPower supply:5 line 3 phase 380v 50/60 hzStart power:10KW(20 minutes before starting the maximum output power)Normal consumption power: Approx.4KWHeating up time:Approx.20 minutesTemperature control range:150-190℃℃
Temperature control Method：PID+SSR Driver：PID+SSR DriverTemperature control accuracy：±3-5℃：±3-5℃Abnormal alarm：Anomaly temperature （Ultra high temperature after normal temperature）：Anomaly temperature （Ultra high temperature after normal temperature）Machine DimensionDimension：L4000×W1170×H1100MM：L4000×W1170×H1100MMHeating zone:L2500×W1170×H360MM×W1170×H360MMWeight:Approx.450Kg
S-TO4000 Tunnel Oven
www.smthelp.com
6. Wave Solder
www.smthelp.com
PCB Size Max.50~250mm
Conveyor height 750±50mm
Conveyor speed 0~1.8M／Min
Conveyor Angle 3~7º (adjustable)
Conveyor direction L->R
Component heigh Max.100mm
Pre-heating zone 600mm
Solder pot wave 2
Pre-heating power 3kw
Pre-heating zone temp room temperature--250°C
Cooling zone 1 Fan cooling
Solder pot power 6kw
Solder pot capacity Approx.200KG
Solder pot temperature room temperature--300°C±1-2℃
Control method P.I.D+SSR
System Control PLC + Touch Screen Control
Flux capacity Max5﹒2L
Spray Fluxer ST-6 Spray
Power Supply 3P 380V AC
Total Power max.9kw
Normal working power Approx.1.5kw
Air Pressure 4~7KG/CM2
Overall Dimensions L2100×W1200×H1400MM
Machine Weight Approx.400kg
S-WS250 Wave Solder
www.smthelp.com
Model S-WS300/350Dimension:(L*W*H(mm) 3320x1250x1560mm Weight 1000kgPower Supply 3p5w 380v/220v 63AStartup Power 22kwOperation Power Comsumption 6kw
Control System PC+PLC（Touch+PLC）Spray SystemSpray SystemTransmission Method Cylinder typeSpray Pressure 0.25-0.45MPAFlux Flow Arrange 10-100ML/MINExhaust UP convulsionsExhaust Capacity 25m3/minPreheating SystemPreheating SystemPreheating Mode Micro hot aircontrol mode PID+SSRperheating Temperature 2preheating Lenghth 1200mmpreheating Tenperature
Conveyor angle 4º-7ºSoldering SystemSoldering SystemType of solder pot Mechanical
Solder pot materialLead-free (316 l) imported high temperature
Wave adjustment way Stepless frequency conversion
Heater Power Nodular cast iron 1.2KWx10
Solder pot temperature 400℃Solder pot capacity 280KGWave Drive Power 1KW 220VSolder pot warm-up time 90MIN/250℃temperature control mode PID+SSRCooling method Forced air cooling
Model : S-WS450CPCB adjustable width: Max.50~450MMPCB transport height: 750 ± 50 mmPCB best welding speed: 1500-1800 - mm/Min(welding Angle) : 3 ~ 7 degreesWelding Angle display: Gravity Angle displayElement height restrictions: Max.150mmWave height range: 0-15 mm flatWave number: 2Preheating zone length: 2000 mmNumber of preheating zone: 4Preheating zone power: 8 kwPreheating zone temperature: room temperature to 250 ℃ adjustable
Heating method: hot airNumber of cooling zone: 2Cooling: forced cooling fanCooling area: 2Apply solder type: lead-free solder Tin furnace power: 12 kwDissolve tin amount : Approx. 450 kg Tin stove material: nodular cast ironTin tin stove type: 4th generation and energy saving furnace (50-350 adjustable)Tin stove temperature: room temperature to 350 ℃, the control precision ± 1 - 2 ℃Tin stove temperature control precision: ± 1°
Solder height detection: conductive type probe detectionSolder add: manualTemperature control mode: P.I.D + SSRThe whole machine control mode: PLC + PCFlux addition method : chemical pump automatically addedFlux flow: 10 ~ 100 ml/min,Spray way: Japan sanyo stepper servomotor + Japan ST - 6 nozzleFlux recovery: tray recyclingPower supply: 3 phase 5 wire 380 vStart the power (total power) : Max. 22 kwNormal operation of the power: Approx. 3-5 kwAir source: 4 ~ 7 kg/CM2Installation dimensions: L4500 *W1400 *H1650MM Weight: Approx. 1500 kgNitrogen concentration: Customer's homemade nitrogen concentration of 99.99%, we can reach 1000 PPM for nitrogen pipeline deviceNitrogen consumption: 10-25 m3 / h
Nitrogen gas control system
S-WS450C Wave Solder
www.smthelp.com
7. Peripheral devices
www.smthelp.com
VACUUM SEALING MACHINEModel：DZQ-400
POWER SUPPLY: 220V/50 HZPOWER: 0.75KWPRESSURE: ≤0.66KPA
VACUUM CHAMBER SIZE EFFECT:400X320MMHEAT SEAL SIZE: 400X10MMPACKGEING SPEED: 3-4 MIN
www.smthelp.com
ULTRASONIC CLEANER
Model：S-100A
Ultrasonic frequency : 40000HzTank material :Stainless steel SUS304Capacity :30.0LCleaning basket :Stainless steel SUS304Time control :Digital display timing control (1-99Minuts)Power supply: A C 220-240V, 50/60HzUltrasonic Power :600W( 10 Vibration element)Heating power :Digital display precision contrrolledheatingProduct Size :530*330*330mm(L*W*H)Tank Size :500*300*200mm (L*W*H) with DrainFunctionNet weight :Approx 18.5 Kg
www.smthelp.com
S1688 Pneumatic Stencil Cleaner Machine
www.smthelp.com
Model S - 680AUse temperature and humidity 10±40 degrees ,20%-90%RH temperature
Tape material8 m of tape8-44 m plastic tapeEthylene soft belt cutting (optional)
The butcher (import high speed steel) consumption cycle: 1-2 yearsDeputy knife (import high speed steel) consumption cycle: 1-2 yearsDrive belt consumption cycles: 1-2 years
Voltage AC 220 v Revolution 1000/minute Rotation 900/minute Installation dimensions 440 * 440 * 550 mm
Time delay precision
set data delay error < 0.1% repeat delay error < 0.1%,no effect change between AC85-264 v voltage
Reset method power reset Control methods electricity latencyRepeat The time interval is not
less than 0.5 sOutput capacity AC250V 3 A; DC24V 3A
(resistance)Insulation strength 100 M Ω/ 500 DCDielectric strength 2.5 KV/min
Power supply voltage DC12V DC24V, -5 ~ + 10% AC85-264V AC24V AC12V
Mechanical life 1﹡ 1000000Electrical life 5 ﹡100000Power consumption MAX300WUsing the environment temperature - 23 ℃ to 60 ℃Using the environment humidity 35-80% RH
Describtion:Describtion:* Principle is based on motor revolution and rotation of the mixing
way.
* Don't need to remove cold storage of solder paste out of ice.
* The solder paste back to temperature in a short time, stir well
can be used at the same time
* 500 g solder paste,mixing two cans
at the same time.Save time.
* Mixing process, no need to open
the solder paste box.
www.smthelp.com
Products introduction: ※ High frequency current heating, Fast Heating and rapid thermal recovery, realize lead-free soldering※ Microcomputer control, Button type thermal control. Digital temperature calibration, Auto sleeping and shutdown function available, energy-efficiency.※ High Frequency with 150w, use the 8mm tip normally.※ Temperature password locks function effectively to protect the production process.※Heating element safe design, easy to maintain.
Specifications：
Power supply AC220V/50HZ
Temperature Range 50°C- 600°C
Max power 150w
Temperature Stability ±2℃
Tip to Ground Resistance < 2Ω
Tip to Ground Potential < 2mV
Temperature calibration Digital temperature calibration
Weight 2.7kg
Dimensions L200×W130×H100mm
Auto Sleeping Yes
Temperature- Lock Mode Password
S-205 High Power Consumption Digital Lead Free Soldering Station
www.smthelp.com
Technical parameters：
1.Model : S-P500/S-P500A2.Dimensions：L1200mm*W700mm*H1100mm（Contains no fan height 250-350MM ）3.weight :Approx.100kg4.Control: PLC + button/relay control5.PCB transmission height:750±50mm6.Transportation speed:0-2000mm/min7.Transfer direction: left to right (right to left) can be customized8.PCB edge space:≥3mm
9.Track width modulation:MAX50～320mm10.Amplitude modulation mode: manual11.Nozzle number：2/212.Nozzle type: high atomizing import nozzle13.Driving mode: stationary14.Components height: up:80 mm , down :50 mm (customizable)15. Capacity: No limit16.Pump: standard17.Exhaust air requirements: more than 15 m3 / min18.Exhaust fan: matching19.Power supply：AC380V /220V 50～60HZ20.The total power:0.05KW21.Air pressure : 0.4－0.6Mpa
Note: S-P500: With PLC S-P500A: Without PLCAutomatic Spray Fluxing System
• Model :S-500S• PCB Size：350X300MM• Tin capacity :80 KG• Speed is adjustable• Solder Dwell heigh：0-70mm• Solder Dwell Time：1-10 sec• Temperature control using PID control• Temperature range: 0-450 ℃• Preheat time: 0-120 s• Automatic removal cycle: 11 s• Dip soldering cycle: 16 s• Tin furnace, furnace adopts 316 stainless steel titanium (selected), ground temperature by K type thermocouple• Tin stove height：50-60mm• Solder Pot Size: 400 * 340 * 80 mm• Overall Dimensions: 700 * 750 * 620 mm• Weight: 75 kg• Power Requirements：220V, 50/60 Hz,3.6KW• Consumed power: 1-2KW/H
• Model:S-600C• PCB Size：600X350mm• Tin capacity:120-130KG• Speed is adjustable• Solder Dwell heigh：0-70mm• Solder Dwell Time：1-10 sec• Temperature control using PID control• Temperature range: 0-450 ℃• Preheat time: 0-120 s• Automatic removal cycle: 14s• Dip soldering cycle: 10-20 s• Tin furnace, furnace adopts 316 stainless steel titanium (selected), ground temperature by K type thermocouple• Tin stove heigh：50-60mm• Solder Pot Size: 650*400*70mm• Overall Dimensions: 850*800*550 mm • Weight: 100 kg• Power Requirements：220V, 50/60 Hz,7.2KW• Consumed power:1.5-3KW/H
Semi-Auto Dip Soldering machine S-500S/S-600C
www.smthelp.com
• Working Voltage：220V/AC(50Hz) 60W• Material ：aluminum and iron• Air Pressure：5KG/c㎡• Visual System：50 times magnification CCD camera• Lighting system：Ring the LED lighting • Display system：Ultra bright LED color display• Feeding control：Precise 8 *2mm /12 *4 mm /
16 * 8mm and 24*8mm feeder control zone• Power supply：220V, 50Hz• Machine Size：350*500*550 mm• Weight：45Kg
Specification：
SMT Feeder Calibration jig
www.smthelp.com
Model:S-TTM350Dimension：350mm*400mm*500mmPower Supply：220VPower:5WMicroscope：15/30 or 20/40 times Thrust meter：0-500G（accuracy 0.1G）0-5000G（precision1G）Tension meter：0-30G（accuracy1G）0-10G（precision0.2G）Jig（insert，big power，SMD）Different products different jigPrecision screw：trip 200MM Micrometer：0-25MM（2PCS）
Thrust and Tension Meter
www.smthelp.com
N2 Dry Cabinet Model: S-250NDC
Specification:Specification:•Outside dimensions: W600*D405*H1315mm•Internal size: W598*D375*H1150mm •Dehumidifying capacity: 250 (L)•Power source: 220 ±10V/50Hz•The average power: 8 w•Humidity: 1%~60%RH•Humidity display accuracy: ±3%RH•Temperature display range: - 9 ℃ to 99 ℃•Temperature display accuracy: ±1℃•Display way: super bright LED digital display temperature and humidity•Humidity control： humidity can be set freely control wet•High bearing layer board: three layers (adjustable)•Cupboard door design: the up and down two to open the door••With software and the USB interface, With software and the USB interface, can view the temperature and can view the temperature and humidity data from the computer humidity data from the computer (Optional)(Optional)•Color: white or black
www.smthelp.com
SMT Automatic Label Mounter
www.smthelp.com
Provide the whole line solution
www.smthelp.com
www.smthelp.com
www.smthelp.com
Auto Insertion line
SMT line
Shenzhen Southern Machinery Sales and Service Co., LtdAdd:Room 1806 Block 3 Jinyun COFCO,Qianjin 2nd Road， Xixiang, Baoan District, Shenzhen ,China
www.smthelp.com
Welcome inquiry
1,Please visit : www.smthelp.com
2, Find us more: https://www.facebook.com/autoinsertion
3, Know more our team: https://cn.linkedin.com/in/smtsupplier
