+ All Categories
Home > Documents > SpaceX landing pad - PrusaPrinters · Cipis SpaceX landing pad VIEW IN BROWSER updated 15. 7. 2019...

SpaceX landing pad - PrusaPrinters · Cipis SpaceX landing pad VIEW IN BROWSER updated 15. 7. 2019...

Date post: 11-Jun-2020
Category:
Upload: others
View: 20 times
Download: 0 times
Share this document with a friend
2
Cipis SpaceX landing pad VIEW IN BROWSER updated 15. 7. 2019 | published 3. 12. 2018 2 hrs 1 pcs f 0.20 mm k 0.40 mm h PLA 35 g d MK3/S Print Files (.gcode) DOWNLOAD ALL FILES PRUSAPRINTERS Summary SpaceX landing pad. Printable with single extrusion printers. Art & Design > Other Art & Designs coaster musk spacex The gcode contains M600 commands for lament change at Z3.0 (change to yellow) and at Z3.4 (change to white). Dimensions: 127x127x3.6 mm
Transcript

869.7 KB

2.00 hrs f 0.20 mm k 0.40 mm h PLA 35.00 g d MK3/S

updated 11. 7. 2019

Model Files (.stl, .3mf, .obj, .amf) DOWNLOAD ALL FILES

140.2 KBupdated 11. 7. 2019

47.2 KBupdated 11. 7. 2019

Find source .stl files on Thingiverse.com

License

This work is licensed under a Creative Commons (4.0 International License)

Attribution-NonCommercial

✖ | Sharing without ATTRIBUTION ✔ | Remix Culture allowed ✖ | Commercial Use ✖ | Free Cultural Works ✖ | Meets Open Definition

spacex_layers_02mm_pla_mk3_2h_triangles.gcode

spacex_single.stl

spacex_single.3mf


Recommended