MAX. CAPACITY (Outriggers) - 50 Tonnes at 3m Radius (75% Rating) 3600 SlewBOOM - 5 SECTION U shaped 11.5m - 43mMAX. ROAD SPEED - 85 km/hrCARRIER - 8x4 Drive

MAX. CAPACITY (Outriggers) - 75 Tonnes at 3m Radius (75% Rating) 3600 SlewBOOM - 5 SECTION U shaped 11.8m - 45.0mMAX. ROAD SPEED - 80 km/hrCARRIER - 8x4 Drive

Quality Changes the World

SPC250 TRUCK CRANE25 TONS LIFTING CAPACITY

SPC250

MAX. CAPACITY (Outriggers) - 25 Tonnes at 3m Radius (75% Rating) 3600 Slew, Jib & Auxiliary Hook are Optional ConfigurationBOOM - 4 SECTION U shaped 10.22m - 31.5mMAX. ROAD SPEED - 75 km/hrCARRIER - 6x4 Drive

SPC250 TruCk CraneCOMPANY BRIFE INTRODUCTION

SPC250 TruCk CraneCOMPANY BRIFE INTRODUCTION2 3

Quality Changes the World Quality Changes the World

SANY Automobile Hoisting Machinery is one of the core business unit of Sany Heavy Industry, mainly engaged in the research and development of high end, mid to large tonnage crane series, including mobile crane, crawler crane, tower crane and loader crane. It has two industrial parks in Ningxiang and Huzhou, since entering the market, the products of Sany Automobile Hoisting Machinery have received worldwide recognition with advanced technology, lean manufacturing, high reliability and excellent service.

SPC250 TruCk CraneCOMPANY BRIFE INTRODUCTION

SPC250 TruCk CraneCOMPANY BRIFE INTRODUCTION2 3

Quality Changes the World Quality Changes the World

SANY Automobile Hoisting Machinery is one of the core business unit of Sany Heavy Industry, mainly engaged in the research and development of high end, mid to large tonnage crane series, including mobile crane, crawler crane, tower crane and loader crane. It has two industrial parks in Ningxiang and Huzhou, since entering the market, the products of Sany Automobile Hoisting Machinery have received worldwide recognition with advanced technology, lean manufacturing, high reliability and excellent service.

Quality Changes the World Quality Changes the World

SPC250 TruCk CraneICON

SPC250 TruCk CraneSEllINg POINTS4 5

contentSANY TRUCK CRANe

Highly efficient, stable, energy-saving, and adjustable hydraulic systemHydraulic system load feedback and constant power control is applied to provide strong lifting capacity and good micro-mobility. Unique steering buffer design is adopted to ensure stable braking operation.

Ultra long, super strong and highly sensitive load lifting capacityFour-section boom of high strength steel structure and optimized U-shaped cross section reduces weight significantly with higher safety rates. Jib mounting angles are 0°, 15°, and 30° which ensures fast and convenient change-over between different operating conditions so as to improving working efficiency of the machine.

Safe, stable, advanced, and intelligent electric control systemSelf-developed controller SYMC specially for engineering machinery is configured. The adoption of CAN-bus full-digital network control technology ensures stable control signal, simple harness, and high reliability. Timely feedback of data information can achieve the monitoring of the overall working status in real-time; the load moment limiter equipped with the comprehensive intelligent protection system is used with accuracy within 3% to provide a comprehensive logic and interlock control, thus ensuring more safe and reliable operation.

04 Icon05 Selling Points06 Introduction08 Dimension09 Technical Parameter10 Operation Condition11 Load Chart14 Wheel Crane Family Map

Tyres

Brakes system

Electrical system

Carrier frame

Outriggers

Transmission system

Drive/Steer

Axles

Engine

Counterweight

Safety system

Hoist system

Cab

Hydraulic system

Telescopic system

Luffing system

Slewing

Control system

Suspension system

Telescopic boom

Superlift devices

Luffing lattice jib

winch mechanism:

Lattice jibs

Quality Changes the World Quality Changes the World

SPC250 TruCk CraneICON

SPC250 TruCk CraneSEllINg POINTS4 5

contentSANY TRUCK CRANe

Highly efficient, stable, energy-saving, and adjustable hydraulic systemHydraulic system load feedback and constant power control is applied to provide strong lifting capacity and good micro-mobility. Unique steering buffer design is adopted to ensure stable braking operation.

Ultra long, super strong and highly sensitive load lifting capacityFour-section boom of high strength steel structure and optimized U-shaped cross section reduces weight significantly with higher safety rates. Jib mounting angles are 0°, 15°, and 30° which ensures fast and convenient change-over between different operating conditions so as to improving working efficiency of the machine.

Safe, stable, advanced, and intelligent electric control systemSelf-developed controller SYMC specially for engineering machinery is configured. The adoption of CAN-bus full-digital network control technology ensures stable control signal, simple harness, and high reliability. Timely feedback of data information can achieve the monitoring of the overall working status in real-time; the load moment limiter equipped with the comprehensive intelligent protection system is used with accuracy within 3% to provide a comprehensive logic and interlock control, thus ensuring more safe and reliable operation.

04 Icon05 Selling Points06 Introduction08 Dimension09 Technical Parameter10 Operation Condition11 Load Chart14 Wheel Crane Family Map

Tyres

Brakes system

Electrical system

Carrier frame

Outriggers

Transmission system

Drive/Steer

Axles

Engine

Counterweight

Safety system

Hoist system

Cab

Hydraulic system

Telescopic system

Luffing system

Slewing

Control system

Suspension system

Telescopic boom

Superlift devices

Luffing lattice jib

winch mechanism:

Lattice jibs

Triple gear pump, load feedback and constant power control are applied to provide strong lifting capacity and good micro-mobility. Unique steering buffer design is applied to ensure stable braking operation.

Load

SPC250 TruCk CraneDIMENSION

SPC250 TruCk CraneTECHNICAl PARAMETER8 9

Quality Changes the World Quality Changes the World

Type Item ParameterCapacity Max. lifting capacity 25t

Dimensions

Overall length 11630mmOverall width 2490mmOverall height 3745mm

Axle distanceAxle-1,2 4320mmAxle-2,3 1360mm

Weight

Overall weight 25000kg

Axle loadFront axle 6000kgRear Axle 19000kg

Rated power 132kW/2500rpmRated torque 675N.m/1500rpm

Traveling

Max.traveling speed 75km/h

Turning radiusMin.turning radius 9.9mMin.turning radius of boom head 11.5m

Wheel formula 6×4Approach angle 34°Departure angle 19°Max.gradeability 26%

Main PerformanceData

Min.rated range 3mBoom section 4Boom shape U-shaped

Max.lifting momentBase boom 885kN·mFull-extend boom 490kN·m

Boom lengthBase boom 10.22mFull-extend boom 31.5m

Outrigger span (Longitudinal×Transversal) 5.45×6.2m

Working speed

Max.single rope lifting speed of winch (no load) 115m/minFull extension/retraction time of boom 60/50sFull lifting/descending time of boom 55/55sSlewing speed 2.5r/min

2490

6200

54502540

（11630）

2090 2080136043201350

10220～31500

3745

19°19°

1790

3175

2000

3200

830

R9900

R11500

430

400

SPC250 TruCk CraneDIMENSION

SPC250 TruCk CraneTECHNICAl PARAMETER8 9

Quality Changes the World Quality Changes the World

Type Item ParameterCapacity Max. lifting capacity 25t

Dimensions

Overall length 11630mmOverall width 2490mmOverall height 3745mm

Axle distanceAxle-1,2 4320mmAxle-2,3 1360mm

Weight

Overall weight 25000kg

Axle loadFront axle 6000kgRear Axle 19000kg

Rated power 132kW/2500rpmRated torque 675N.m/1500rpm

Traveling

Max.traveling speed 75km/h

Turning radiusMin.turning radius 9.9mMin.turning radius of boom head 11.5m

Wheel formula 6×4Approach angle 34°Departure angle 19°Max.gradeability 26%

Main PerformanceData

Min.rated range 3mBoom section 4Boom shape U-shaped

Max.lifting momentBase boom 885kN·mFull-extend boom 490kN·m

Boom lengthBase boom 10.22mFull-extend boom 31.5m

Outrigger span (Longitudinal×Transversal) 5.45×6.2m

Working speed

Max.single rope lifting speed of winch (no load) 115m/minFull extension/retraction time of boom 60/50sFull lifting/descending time of boom 55/55sSlewing speed 2.5r/min

2490

6200

54502540

（11630）

2090 2080136043201350

10220～31500

3745

19°19°

1790

3175

2000

3200

830

R9900

R11500

430

400

Quality Changes the World Quality Changes the World

SPC250 TruCk CraneOPERATION CONDITION

SPC250 TruCk CranelOAD CHART10 11

SPC250 Working radius-lifting height curve

0°15°

30°31.5+8m

31.5m

27.24m

22.99m

18.73m

14.48m

10.22m

5

3.0 4.0 5.0 6.0 7.0 8.0 9.0 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30

10

15

20

25

30

35

40

44

Radius (m)

Lifti

ng h

eigh

t (m

)Prerequisites:① Boom operating condition(fully extended boom length),min.length is 10.22 and.max.length is 31.5m② The span of outrigger is 5.45×6.2m③ 240°rotation is applied④ Counterweight is 1.6T

Working range(m)Main boom

Working range(m)10.22 14.48 18.73 22.99 27.24 31.5

3 25000 16000 　 　 　 　 3

3.5 23000 16000 13700 　 　 　 3.5

4 21000 15500 13500 　 　 　 4

4.5 19000 15500 13300 10500 　 　 4.5

5 17000 15000 13100 10000 8500 　 55.5 15000 14000 12500 10000 8500 　 5.56 13200 13000 11600 9400 8000 6500 6

6.5 11500 11800 11000 8800 8000 6400 6.57 10000 10000 10000 8200 7500 6300 78 7500 7800 8000 7500 7000 5900 89 　 6200 6400 6300 6200 5400 910 　 5700 5200 5300 5100 4900 1012 　 4200 3800 3800 3700 3700 1214 　 　 3000 3000 3000 2900 1416 　 　 　 2200 2400 2300 1618 　 　 　 1800 1700 1800 1820 　 　 　 　 1500 1500 2022 　 　 　 　 　 1200 22

Number of lines 8 6 6 4 3 3 Number of linesTelescoping condition(%)

Ⅰ 100% 100% 100% 100% 100% 100% ⅠⅡ 0 20% 40% 60% 80% 100% ⅡⅢ 0 20% 40% 60% 80% 100% ⅢⅣ 0 20% 40% 60% 80% 100% Ⅳ

Unit:Kg

1. Values listed in the table refer to rated lifting capacity measured at flat and solid gound under the lever state of the crane.2. Value above heavy line shall be determined by strength of the crane and under this line shall be determined by stability of the crane.3. Rated load values determined by stability shall comply with ISO 4305.4. Rated lifting capacity listed in the table included weights of lifting hooks (320kg of hook )and hangers.5. If actual boom length and range are between two values specified in the table, larger value will determine the lifting capacity.

Quality Changes the World Quality Changes the World

SPC250 TruCk CraneOPERATION CONDITION

SPC250 TruCk CranelOAD CHART10 11

SPC250 Working radius-lifting height curve

0°15°

30°31.5+8m

31.5m

27.24m

22.99m

18.73m

14.48m

10.22m

5

3.0 4.0 5.0 6.0 7.0 8.0 9.0 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30

10

15

20

25

30

35

40

44

Radius (m)

Lifti

ng h

eigh

t (m

)

Prerequisites:① Boom operating condition(fully extended boom length),min.length is 10.22 and.max.length is 31.5m② The span of outrigger is 5.45×6.2m③ 240°rotation is applied④ Counterweight is 1.6T

Working range(m)Main boom

Working range(m)10.22 14.48 18.73 22.99 27.24 31.5

3 25000 16000 　 　 　 　 3

3.5 23000 16000 13700 　 　 　 3.5

4 21000 15500 13500 　 　 　 4

4.5 19000 15500 13300 10500 　 　 4.5

5 17000 15000 13100 10000 8500 　 55.5 15000 14000 12500 10000 8500 　 5.56 13200 13000 11600 9400 8000 6500 6

6.5 11500 11800 11000 8800 8000 6400 6.57 10000 10000 10000 8200 7500 6300 78 7500 7800 8000 7500 7000 5900 89 　 6200 6400 6300 6200 5400 910 　 5700 5200 5300 5100 4900 1012 　 4200 3800 3800 3700 3700 1214 　 　 3000 3000 3000 2900 1416 　 　 　 2200 2400 2300 1618 　 　 　 1800 1700 1800 1820 　 　 　 　 1500 1500 2022 　 　 　 　 　 1200 22

Number of lines 8 6 6 4 3 3 Number of linesTelescoping condition(%)

Ⅰ 100% 100% 100% 100% 100% 100% ⅠⅡ 0 20% 40% 60% 80% 100% ⅡⅢ 0 20% 40% 60% 80% 100% ⅢⅣ 0 20% 40% 60% 80% 100% Ⅳ

Unit:Kg

1. Values listed in the table refer to rated lifting capacity measured at flat and solid gound under the lever state of the crane.2. Value above heavy line shall be determined by strength of the crane and under this line shall be determined by stability of the crane.3. Rated load values determined by stability shall comply with ISO 4305.4. Rated lifting capacity listed in the table included weights of lifting hooks (320kg of hook )and hangers.5. If actual boom length and range are between two values specified in the table, larger value will determine the lifting capacity.

Metric 75% Lifting Capacities (Kilograms) on Outriggers Fully Extended.

Quality Changes the World Quality Changes the World

Prerequisites:① Boom operating condition(fully extended boom length),min.length is 10.22 and.max.length is 31.5m② The span of outrigger is 5.45×6.2m③ 360°rotation is applied④ Counterweight is 1.6T

Working range(m)Main boom

Working range(m)10.22 14.48 18.73 22.99 27.24 31.5

3 25000 16000 　 　 　 　 3

3.5 22000 16000 13500 　 　 　 3.5

4 19000 15500 13000 　 　 　 4

4.5 17500 15500 13000 10500 　 　 4.5

5 15500 14500 12600 10000 8500 　 55.5 14000 13500 12000 10000 8300 　 5.56 12500 12500 11400 9400 7900 6300 6

6.5 10800 11000 10600 8700 7600 6100 6.57 9000 9800 9600 8000 7100 6000 78 7000 7500 7700 7200 6800 5600 89 　 6000 6000 6000 5900 5200 910 　 5300 5000 5000 4900 4700 1012 　 3700 3500 3400 3400 3400 1214 　 　 2500 2500 2600 2500 1416 　 　 　 1900 1800 1900 1618 　 　 　 1400 1300 1400 1820 　 　 　 　 1000 1000 2022 　 　 　 　 　 700 22

Number of lines 8 6 6 4 3 3 Number of linesTelescoping condition(%)

Ⅰ 100% 100% 100% 100% 100% 100% ⅠⅡ 0 20% 40% 60% 80% 100% ⅡⅢ 0 20% 40% 60% 80% 100% ⅢⅣ 0 20% 40% 60% 80% 100% Ⅳ

SPC250 TruCk CranelOAD CHART

SPC250 TruCk CranelOAD CHART12 13

Unit:Kg

1. Values listed in the table refer to rated lifting capacity measured at flat and solid gound under the lever state of the crane.2. Value above heavy line shall be determined by strength of the crane and under this line shall be determined by stability of the crane.3. Rated load values determined by stability shall comply with ISO 4305.4. Rated lifting capacity listed in the table included weights of lifting hooks (320kg of hook )and hangers.5. If actual boom length and range are between two values specified in the table, larger value will determine the lifting capacity.

Unit:Kg

Prerequisites:① Boom operating condition( fully extended boom length + jib length),max. length is 31.5m+8m② The span of outriggers is 5.45×6.2m③ 240°rotation is applied④ Counterweight is 1.6T

Main boom angleMain boom+Jib

Main boom angleCompensation angle0° Compensation angle 15° Compensation angle 30°

78° 2700 2400 1800 78°75° 2510 2220 1750 75°72° 2140 1830 1520 72°70° 1910 1570 1350 70°65° 1450 1240 1000 65°60° 1080 1020 750 60°55° 800 720 560 55°50° 580 210 400 50°

Unit:Kg

Working range(m) 10.22 14.48 18.73 22.99 27.24 31.5 Working range(m)

3 25000 16000 0 33.5 22000 16000 13500 3.54 19500 15500 13000 4

4.5 17500 15500 13000 10500 4.55 15500 14500 12600 10000 8500 5

5.5 14000 13500 12000 10000 8300 5.56 12500 12500 11400 9400 7900 6300 6

6.5 10800 11000 10600 8700 7600 6100 6.57 9000 9800 9600 8000 7100 6000 7

7.5 8000 8600 8500 7600 7000 5800 7.58 7000 7500 7700 7200 6800 5600 89 6000 6000 6000 5900 5200 9

10 5300 5000 5000 4900 4700 10

12 3700 3500 3400 3400 3400 12

14 2500 2500 2600 2500 14

16 1900 1800 1900 16

18 1400 1300 1400 18

20 1000 1000 20

22 700 22

Number of lines 8 6 6 4 3 3 Number of linesTelescoping condition (%)

I 100% 100% 100% 100% 100% 100% III 0 20% 40% 60% 80% 100% IIIII 0 20% 40% 60% 80% 100% IIIIV 0 20% 40% 60% 80% 100% IV

Main boom

Prerequisites1. Boom operating conditions(fully extended boom length),min. length is 10.22m and max.length is 31.5 m2. The span of outriggers is 5.45m×6.2m3. 360°rotation is applied4. Counterweight is 1.6T

Quality Changes the World Quality Changes the World

Prerequisites:① Boom operating condition(fully extended boom length),min.length is 10.22 and.max.length is 31.5m② The span of outrigger is 5.45×6.2m③ 360°rotation is applied④ Counterweight is 1.6T

Working range(m)Main boom

Working range(m)10.22 14.48 18.73 22.99 27.24 31.5

3 25000 16000 　 　 　 　 3

3.5 22000 16000 13500 　 　 　 3.5

4 19000 15500 13000 　 　 　 4

4.5 17500 15500 13000 10500 　 　 4.5

5 15500 14500 12600 10000 8500 　 55.5 14000 13500 12000 10000 8300 　 5.56 12500 12500 11400 9400 7900 6300 6

6.5 10800 11000 10600 8700 7600 6100 6.57 9000 9800 9600 8000 7100 6000 78 7000 7500 7700 7200 6800 5600 89 　 6000 6000 6000 5900 5200 910 　 5300 5000 5000 4900 4700 1012 　 3700 3500 3400 3400 3400 1214 　 　 2500 2500 2600 2500 1416 　 　 　 1900 1800 1900 1618 　 　 　 1400 1300 1400 1820 　 　 　 　 1000 1000 2022 　 　 　 　 　 700 22

Number of lines 8 6 6 4 3 3 Number of linesTelescoping condition(%)

Ⅰ 100% 100% 100% 100% 100% 100% ⅠⅡ 0 20% 40% 60% 80% 100% ⅡⅢ 0 20% 40% 60% 80% 100% ⅢⅣ 0 20% 40% 60% 80% 100% Ⅳ

SPC250 TruCk CranelOAD CHART

SPC250 TruCk CranelOAD CHART12 13

Unit:Kg

1. Values listed in the table refer to rated lifting capacity measured at flat and solid gound under the lever state of the crane.2. Value above heavy line shall be determined by strength of the crane and under this line shall be determined by stability of the crane.3. Rated load values determined by stability shall comply with ISO 4305.4. Rated lifting capacity listed in the table included weights of lifting hooks (320kg of hook )and hangers.5. If actual boom length and range are between two values specified in the table, larger value will determine the lifting capacity.

Unit:Kg

Prerequisites:① Boom operating condition( fully extended boom length + jib length),max. length is 31.5m+8m② The span of outriggers is 5.45×6.2m③ 240°rotation is applied④ Counterweight is 1.6T

Main boom angleMain boom+Jib

Main boom angleCompensation angle0° Compensation angle 15° Compensation angle 30°

78° 2700 2400 1800 78°75° 2510 2220 1750 75°72° 2140 1830 1520 72°70° 1910 1570 1350 70°65° 1450 1240 1000 65°60° 1080 1020 750 60°55° 800 720 560 55°50° 580 210 400 50°

Unit:Kg

1. Values listed in the table refer to rated lifting capacity measured at flat and solid gound under the lever state of the crane.2. Value above heavy line shall be determined by strength of the crane and under this line shall be determined by stability of the crane.3. All rated loads are tested to conform requirements of EN 13000 & ISO 4305, and shall not exceed 75% of the tipping load on outriggers and tyres under stability test code.4. Rated lifting capacity listed in the table included weights of lifting hooks (320kg of hook )and hangers.5. If actual boom length and range are between two values specified in the table, larger value will determine the lifting capacity.

Quality Changes the WorldQuality Changes the World

SPC250 TruCk CraneWHEEl CRANE FAMIlY MAP14

SRC400Maximum Load Capacity: 40t

Quality Changes the WorldQuality Changes the World

SPC250 TruCk CraneWHEEl CRANE FAMIlY MAP14