IntroductionThis document provides guidelines for describing, configuring and using the mini module SPC58XXADPT100S.
Figure 1. Overview of SPC58XXADPT100S mini module - top
SPC58XXADPT100S
UM2661
User manual
UM2661 - Rev 1 - January 2020For further information contact your local STMicroelectronics sales office.
www.st.com
1 Overview
The SPC58XXADPT100S mini module is an evaluation board supporting STMicroelectronics SPC58xGxxE3,SPC58xCxxE3, SPC58xBxxE3 microcontrollers in TQFP100 package with exposed pad down.The SPC58XXADPT100S mini module is designed to be connected onto the SPC57xxMB motherboard, offeringa mechanism for easy customer evaluation of the supported devices, and facilitating hardware and softwaredevelopment.High density connectors provide the interface between the EVB and MCU daughter cards and help thedevelopers to evaluate all device peripherals.This user manual provides information on using SPC58XXADPT100S mini module board and its hardwarefeatures.The mini module may be used as a stand-alone unit allowing access to the CPU, but no access to the I/O pins asany motherboard peripherals.
Figure 2. Overview of SPC58XXADPT100S mini module - bottom
1.1 Package contents
An SPC58XXADPT100S adapter package includes the following items:• SPC58XXADPT100S mini module
UM2661Overview
UM2661 - Rev 1 page 2/23
• Mini CD with user manual
1.2 Supported device
The SPC58XXADPT100S mini module supports the following STMicroelectronics family of Microcontrollers inTQFP100 package with exposed pad down:• SPC58xGxxE3• SPC58xCxxE3• SPC584BxxE3• SPC582BxxE3
UM2661Supported device
UM2661 - Rev 1 page 3/23
2 SPC58XXADPT100S features
2.1 Mini module features
The SPC58XXADPT100S mini module board has the following features:• Connector for external power supplies input: 5 V, 3.3 V, 1.25 V (for stand-alone mode)• Reset button with driver and led indicator• Socket for device in TQFP100 package with exposed pad down• Debug ports:
– 34-pin SAMTEC connector for Nexus 2– 14-pin header connector for JTAG port
• 40 Mhz crystal main oscillator with jumpers to optionally disconnect it• 8 Mhz oscillator with jumpers to optionally disconnect it• Clock input through SMA connector to optionally disconnect it• Jumper for boot configuration• X SAMTEC QSH series, 240 way connector to connect mini module to motherboard
2.2 Hardware dimension and PCB component view
The mini module has the following dimension:• 127 mm x 114.3 mm (PCB dimension)• Max top components height 19 mm• PCB thickness: 1.6 mm• Max bottom components height 3.5 mm
UM2661SPC58XXADPT100S features
UM2661 - Rev 1 page 4/23
Figure 3. SPC58XXADPT100S top component view
UM2661Hardware dimension and PCB component view
UM2661 - Rev 1 page 5/23
Figure 4. SPC58XXADPT100S bottom component view
2.3 Pin numbering for jumpers
Close to selection jumper (both 3-pin and 4-pin), are shown in silkscreen the indications of connections.See below some examples.
Figure 5. Selection jumper scheme
UM2661Pin numbering for jumpers
UM2661 - Rev 1 page 6/23
3 Hardware and jumper settings
3.1 Power supplies
When the mini module is plugged into the motherboard, power is supplied directly by the motherboard. In thissetup, the external power supply input available on the mini module should NOT be used.When the SPC58XXADPT100S mini module is used as a stand-alone board, external power supplies must beused (5 V, 3.3 V, 1.25 V).The following jumpers are used to configure the power supply:
Table 1. Supply related jumpers
Jumper Description Default
J2 Jumper to enable the use of Supply 3.3V_SR Closed
J3 Jumper to enable the use of Supply 5.0V_SR Closed
J4 Jumper to enable the use of Supply 1.25V_SR Closed
J5
VDD_HV_ADR voltage configuration:• 1-2 5.0V_LR• 2-3 3.3V_SR• 2-4 5.0V_SR
1-2 (5.0V_LR)
J6
VDD_HV_ADV voltage configuration:• 1-2 5.0V_LR• 2-3 3.3V_SR• 2-4 5.0V_SR
1-2 (5.0V_LR)
J9VDD_HV_IO_MAIN voltage configuration:• 1-2 5.0V_SR• 2-3 3.3V_SR
1-2 (5.0V_SR)
J11VDD_LV voltage configuration:• 1-2 1.25V_SR• 2-3 1.25V from Ballast circuit
1-2 (1.25V_SR)
J12Supply for BALLAST circuit configuration:• 1-2 VDD_HV_IO_MAIN• 2-3 5.0V_SR
1-2 (VDD_HV_IO_MAIN)
JP1 VDD_HV_FLA voltage configuration, connect or disconnect VDD_HV_FLA fromVDD_HV_IO_MAIN
Closed
(Connect VDD_HV_FLA toVDD_HV_IO_MAIN)
UM2661Hardware and jumper settings
UM2661 - Rev 1 page 7/23
3.2 Microcontrollers configuration
The following jumpers need to configure the board for used STMicroelectronics microcontroller:SPC58xCxxE3
Table 2. Microcontroller SPC58xCxxE3 configuration related jumpers
Jumper Description Default
J10
VDD_HV_IO_FLEX voltage configuration:
(Used only for SPC58xCxxE3)• 1-2 5.0V_SR• 2-3 3.3V_SR
1-2
(5.0V_SR)
JP3Device pin 50 function configuration:• 1-2 PA[15]• 2-3 VDD_LV
1-2
(Connect pin 50 to PA[15])
J13RSTIN configuration:• 1-2 PORST• 2-3 ESR0
1-2
(PORST)
J26Device pin 95 function configuration:• 1-2 PC[12]• 2-3 VDD_HV_IO_FLEX
2-3
(Connect pin 95 to VDD_HV_IO_FLEX)
J14Device pin 11 function configuration:• 1-2 PC1• 2-3 ESR0
1-2
(Connect pin 11 to PC[1])
JP7Device pin 68 function configuration:• 1-2 PM[14]• 2-3 ESR0
1-2
(Connect pin 68 to PM[14])
JP2Device pin 1 function configuration:• 1-2 PD[14]• 2-3 VDD_LV
1-2
(Connect pin 1 to PD[14])
J27Device pin 86 function configuration:• 1-2 PH[4]• 2-3 BCTRL
2-3
(Connect pin 86 to BCTRL)
JP5Device pin 26 function configuration:• 1-2 PI[6]• 2-3 VDD_LV
1-2
(Connect pin 26 to PI[6])
The following jumpers need to configure the board for used STMicroelectronics microcontroller:• SPC582BxxE3• SPC584BxxE3
Table 3. Microcontroller SPC582BxxE3, SPC584BxxE3 configuration related jumpers
Jumper Description Default
J10
VDD_HV_IO_FLEX voltage configuration:
(Used only for SPC58xCxxE3)• 1-2 5.0V_SR• 2-3 3.3V_SR
Open
UM2661Microcontrollers configuration
UM2661 - Rev 1 page 8/23
Jumper Description Default
JP3Device pin 50 function configuration:• 1-2 PA[15]• 2-3 VDD_LV
1-2
(Connect pin 50 to PA[15])
J13RSTIN configuration:• 1-2 PORST• 2-3 ESR0
1-2
(PORST)
J26Device pin 95 function configuration:• 1-2 PC[12]• 2-3 VDD_HV_IO_FLEX
2-3
(Connect pin 95 to VDD_HV_IO_FLEX)
J14Device pin 11 function configuration:• 1-2 PC1• 2-3 ESR0
2-3
(Connect pin 11 to ESR0)
JP7Device pin 68 function configuration:• 1-2 PM[14]• 2-3 ESR0
1-2
(Connect pin 68 to PM[14])
JP2Device pin 1 function configuration:• 1-2 PD[14]• 2-3 VDD_LV
1-2
(Connect pin 1 to PD[14])
J27Device pin 86 function configuration:• 1-2 PH[4]• 2-3 BCTRL
2-3
(Connect pin 86 to BCTRL)
JP5Device pin 26 function configuration:• 1-2 PI[6]• 2-3 VDD_LV
1-2
(Connect pin 26 to PI[6])
The following jumpers need to configure the board for used STMicroelectronics microcontroller:SPC58xGxxE3
Table 4. Microcontroller SPC58xGxxE3 configuration related jumpers
Jumper Description Default
J10
VDD_HV_IO_FLEX voltage configuration:
(Used only for SPC58xCxxE3)• 1-2 5.0V_SR• 2-3 3.3V_SR
Open
JP3Device pin 50 function configuration:• 1-2 PA[15]• 2-3 VDD_LV
2-3
(Connect pin 50 to VDD_LV)
J13RSTIN configuration:• 1-2 PORST• 2-3 ESR0
2-3
(ESR0)
J26Device pin 95 function configuration:• 1-2 PC[12]• 2-3 VDD_HV_IO_FLEX
1-2
(Connect pin 95 to PC[12])
J14Device pin 11 function configuration:• 1-2 PC1• 2-3 ESR0
1-2
(Connect pin 11 to PC[1])
UM2661Microcontrollers configuration
UM2661 - Rev 1 page 9/23
Jumper Description Default
JP7Device pin 68 function configuration:• 1-2 PM[14]• 2-3 ESR0
2-3
(Connect pin 68 to ESR0)
JP2Device pin 1 function configuration:• 1-2 PD[14]• 2-3 VDD_LV
2-3
(Connect pin 1 to VDD_LV)
J27Device pin 86 function configuration:• 1-2 PH[4]• 2-3 BCTRL
2-3
(Connect pin 86 to BCTRL)
JP5Device pin 26 function configuration:• 1-2 PI[6]• 2-3 VDD_LV
2-3
(Connect pin 26 to VDD_LV)
The jumpers are default closed for STMicroelectronics microcontroller:• SPC58xCxxE3
3.3 Port configuration
The following jumpers need to configure the ports:
Table 5. Port related jumpers
Jumper Description Default
J15 TESTMODE settings Close
3.4 System clock configuration
The mini module supports the usage of crystal clock sources as well as external clock source:
Table 6. Main clock related jumpers
Jumper Description Default
J17 40 MHz crystal clock source Enable for pin EXTAL 1-2 (XT1 pin2)
J19 40 MHz crystal clock source Enable for pin XTAL 1-2 (XT1 pin1)
J20 Enable 8 MHz oscillator power supply Open
J22 External clock source from 8 MHz oscillator or SMA connector 1-2 (8 MHz oscillator )
UM2661Port configuration
UM2661 - Rev 1 page 10/23
3.5 Reset circuit
The mini module supports different way to reset the microcontroller.To use and perform the reset driving there are different jumper and switch:
Table 7. Reset related jumpers
Jumper Description Default
SW1 Reset push button Open
J29 Connect the external reset to the reset driver for ESR0 and PORST pins Close
J21 Connect the external reset to ESR0 pin Close
J30 Connect the external reset to PORST pin Close
3.6 Test point
The mini module has several test points. Below all test point descriptions:
Table 8. Test points
Test Point Description
GT1, GT2,GT3,GT4,GT5 GND test point
GT6 AGND test point
GT7 VSS_OSC test point
TP1 TCK test point
TP2 TMS/Txp test point
TP3 TDI/Txn test point
TP4 TDO/Rxp test point
TP5 JCOMP/Rxn test point
TP6 J23A, QSH connector, pin10 (PA5) test point
TP11 J23A, QSH connector, pin11 (PA6) test point
TP12 J23A, QSH connector, pin12 (PA7) test point
TP13 J23A, QSH connector, pin13 (PA8) test point
TP14 J23A, QSH connector, pin14 (PA9) test point
TP7 J23A, QSH connector, pin19 (PA14) test point
TP16 J23A, QSH connector, pin49 (PE4) test point
TP17 J23A, QSH connector, pin53 (PE8) test point
TP8 J24B, QSH connector, pin210 (PD6) test point
TP9 J24B, QSH connector, pin209 (PD7) test point
TP15 J24B, QSH connector, pin207 (PD9) test point
TP10 J24B, QSH connector, pin183 (PF13) test point
UM2661Reset circuit
UM2661 - Rev 1 page 11/23
3.7 Connectors
The mini module has the following connectors:
Table 9. Connectors
Connectors Description
J16 14-pin header connector for JTAG port
J18 34-pin SAMTEC connector for Nexus 2
J25 Fault Collection and Control Unit (FCCU) pin, for failure notification
J23, J24 2 X SAMTEC QSH series, 240 way connector to connect mini module to Motherboard
J1 External power supplies input (5V, 3.3V, 1.25V)
J25 SMA Connector for External Clock Input
UM2661Connectors
UM2661 - Rev 1 page 12/23
4 BOM and schematics
4.1 BOM
Table 10. Bill of material
Qty Designator Part Number EI Comment Part Description
7 C1, C7, C25, C42,C43, C46, C53 2.2µF Mult. Cer. cap. 16V 0805 - Automotive
Series - NOT MOUNTED !!!
10C2, C5, C8, C11, C13,C15, C20, C22, C26,C28
CCERSMD104-0603M 100nF Mult. Cer. cap. 50V 0603
14
C3, C6, C9, C16, C17,C18, C23, C24, C27,C29, C38, C39, C40,C41
CCERSMD103-0603M 10nF Mult. Cer. cap. 50V 0603
7 C4, C30, C32, C34,C36, C44, C45 CCERSMD225-0805M 2.2µF Mult. Cer. cap. 16V 0805 - Automotive
Series
5 C10, C12, C14, C19,C21 CCERSMD475-0805M 4.7µF Mult. Cer. cap. 16V 0805
4 C31, C33, C35, C37 CCERSMD473-0603M 47nF Mult. Cer. cap. 50V 0603
2 C47, C50 47pF DNP Mult. Cer. cap. 50V SMD 0603 - NOTMOUNTED !!!
1 C48 CCERSMD270-0603 27pF Mult. Cer. cap. 50V SMD 0603
2 C49, C51 10pF DNP Mult. Cer. cap. 50V SMD 0603 - NOTMOUNTED !!!
1 C52 CCERSMD104-0603M 100nF Mult. Cer. cap. 50V SMD 0603
1 DUT1 ZOCC100TQFP-Y1 Device Under Test - eTQFP100(YE) -YAMAICHI IC357-1004-146
7 GT1, GT2, GT3, GT4,GT5, GT6, GT7 TEST2 TEST2 PCB test point - Raised Loops
1 J1 TYCO-1437671-6 TYCO-1437671-6 TYCO Board Mount Screwless Connector -Pitch 5.08mm 90°
4 J2, J3, J4, J15 STRIP2PM STRIP2PM Male Strip 2 poles See Mech Part -Normally Closed !!
2 J5, J6 STRIP3PM + STRIP1PM STRIP3PM +STRIP1PM
Male Strip 4 poles See Mech Part (Closepin 1 and 2)
9 J9, J10, J11, J12, J13,J14, J17, J19, J22 STRIP3PM STRIP3PM Male Strip 3 poles See Mech Part (Close
pin 1 and 2)
1 J16 M.14.180 LP-3M N2514-6002RB 3M Conn Flat Male 14 pins, straight - Pitch2.54mm
1 J18 SAM-ASP13797301 SAMTECASP-137973-01
SAMTEC 0.8mm pitch - Connector SMD17x2 - NEXUS Connector
1 J20 STRIP2PM STRIP2PM Male Strip 2 poles See Mech Part -OPEN !!!
3 J21, J29, J30 STRIP2PM STRIP2PM Male Strip 2 poles See Mech Part -CLOSE !!!
2 J23, J24 SAM-QSH12001LDA SAMTECQSH-120-01-L-D-A
SAMTEC 0.5mm pitch High Speed SMDSocket
1 J25 BNC-SMA-FEM-180 BNC-SMA-FEM-180 Conn. RF SMA 180°
UM2661BOM and schematics
UM2661 - Rev 1 page 13/23
Qty Designator Part Number EI Comment Part Description
2 J26, J27 STRIP3PM STRIP3PM Male Strip 3 poles See Mech Part (Closepin 2 and 3)
1 J28 STRIP2PM STRIP2PM Male Strip 2 poles
1 JP1 Jumper SMD - CLOSE!!! - With a solderdrop !!!
4 JP2, JP3, JP5, JP7 Jumper SMD - Close with a solder drop(Close pin 1 and 2)
1 LD1 LEDSMDGIAL-0805 Yellow Led Diode Yellow SMD 0805
1 LD2 LEDSMDRED-0805 Red Led Diode Red SMD 0805
1 OSC1 Q8MHZ-SMD-3953M 8MHz Hybrid Quartz Osc SMD ECS 3953M
1 Q1 TRNJD2873-SMD NJD2873 NPN Plastic Power Transistor DPAK
2 R1, R3 RESMD000-0603 0R Resistor 1/10W 1% 0603
1 R2 RESMD0R1-1206 0R1 Resistor 1/2W 1% 1206
3 R4, R6, R16 RESMD472-0603 4K7 Resistor 1/10W 1% SMD 0603
1 R5 Resistor 1/10W 1% SMD 0603 - Notmounted !!
3 R7, R10, R14 RESMD103-0603 10K Resistor 1/10W 1% SMD 0603
1 R9 10K DNP Resistor 1/10W 1% SMD 0603 - NOTMOUNTED !!!
1 R11 RESMD000-0603 0R Resistor 1/10W 1% SMD 0603
2 R12, R13 RESMD561-0603 560R Resistor 1/10W 1% SMD 0603
2 R15, R17 RESMD221-0603 220R Resistor 1/10W 1% SMD 0603
1 R18 RESMD49R9-0603 49R9 Resistor 1/16W 1% 0603
1 R19 RESMD000-805-5 0R Resistor 1/10W 5% 0805
1 SW1 PULSANTECS Pushbutton Pushbutton NO low profile for pcb
17
TP1, TP2, TP3, TP4,TP5, TP6, TP7, TP8,TP9, TP10, TP11,TP12, TP13, TP14,TP15, TP16, TP17
Testpoint SMD - NOT MOUNTED !!!
1 U1 74LVC125AMTR-SMD 74LVC125AMTR I.C. Quad bus buffers SO14
1 U2 74V1G08-SMD 74V1G08STR I.C. Single 2-Input and Gate - SMDSOT23-5L
1 XT1 Q40MHZ-SMD-5032 40MHz Quartz 40MHz SMD NX5032GA XTAL NDK
UM2661BOM
UM2661 - Rev 1 page 14/23
4.2 Schematics
Figure 6. Power and decoupling
1
2
3
4
TYCO-1437671-6
J1
5.0V_SR3.3V_SR1.25V_SR
Pow er a n d Decou p l in g
GND
GND
GT1TEST2
GT2TEST2
GT3TEST2
GT4TEST2
GT5TEST2
RING -HEADED FOR PROBE HOOK
J2
defa
ultC
LOSE
D
J3
defa
ultC
LOSE
D
J4
defa
ultC
LOSE
D
0603
100nF50VX7R
C2
VDD_HV_ADR_S
ADC
OSC & JTAG (3.3V or 5V)
I/O (3.3v - 5V)
SPC58xGxxE3 / SPC58xCxxE3 / SPC58xBxxE3Power Pins
VDD_HV_ADR_S 29
VDD_HV_ADV_S 31
VDD_HV_JTAG_OSC 56
VDD_HV_IO_W0 20
VDD_HV_IO0_S0 42
VDD_LV_S1 41
VDD_LV_E0 51
VDD_LV_E2 69
VDD_HV_IO0_E0 52
VDD_HV_N0 76
MCU CORE LOGIC( 1.25V )
VSS_HV_ADR_S28
EXP_PAD101
VSS_HV_ADV_S30
VSS_HV_OSC53
VDD_HV_FLA 87FLASH DECOUPLING
VDD_HV_N2 98
I/O (3.3v - 5V)Power Bar
VDD_LV_W2 19
EXP_PAD102EXP_PAD103EXP_PAD104
DUT1A
CHORUS-TQFP100
0603
10nF50VX7R
C3
GND
AGND
AGND
GT6TEST2
0R1/10W0603
R3
VSS_OSC GND
VSS_OSC
0R1/10W0603
R1
AGND GND
AGND AGND
0603
100nF50VX7R
C5
VDD_HV_ADV_S
0603
10nF50VX7R
C6
AGND AGND
VSS_OSC
GT7TEST2
1-2 CLOSEDDEFAULT2
13
J9
0603
100nF50VX7R
C26
0603
10nF50VX7R
C27
GND GND
0805
2.2uF16VX7R
C25
GNDN.M.
default CLOSE
JP1
0805
2.2uF16VX7R
C32
0603
47nF50VX7R
C33
0603
10nF50VX7R
C39
GND GND GND
0805
2.2uF16VX7R
C34
0603
47nF50VX7R
C35
0603
10nF50VX7R
C40
Pin 51
GND GND GND
0805
2.2uF16VX7R
C36
0603
47nF50VX7R
C37
0603
10nF50VX7R
C41
GND GND GND
Pin 41
0805
2.2uF16VX7R
C30
0603
47nF50VX7R
C31
0603
10nF50VX7R
C38
Pin 19
GND GND GND
Pin 69
BCTRLNJD2873
Q1
Thermal plane
0805
2.2uF16VX7R
C44
0805
2.2uF16VX7R
C45
0805
2.2uF16VX7R
C46
N.M.
0805
2.2uF16VX7R
C42
N.M.0805
2.2uF16VX7R
C43
N.M.
GND
GND
for power 2W/3W
1-2 CLOSED
GNDGND
0R11/2W1206
R2
2
13
J12
VDD_HV_IO_MAIN
5.0V_SR
1-2 CLOSEDDEFAULT2
13
J11
VDD_LV
1-2 CLOSEDDEFAULT2
13
J10
0603
100nF50VX7R
C28
0603
10nF50VX7R
C29
GND GND
VDD_HV_IO_FLEX Used only for Chorus 4MVDD_HV_IO_FLEX
VDD_HV_IO_FLEX
VDD_LV
DEFAULT
AGNDN.M.
0805
2.2uF16VX7R
C1
0805
2.2uF16VX7R
C4
AGND
5.0V_SR3.3V_SR 1.25V_SR
BCTRL
5.0V_LR
1-2 CLOSEDDEFAULT
1-2 CLOSEDDEFAULT
5.0V_SR
5.0V_SR21
34
J6
21
34
J5
0805
2.2uF16VX7R
C53
GNDN.M.
Pin 87
0805
4.7uF16VX7R
C10
GND
0603
100nF50VX7R
C11
0603
10nF50VX7R
C16
GND GND
Pin 20
0805
4.7uF16VX7R
C12
GND
0603
100nF50VX7R
C13
0603
10nF50VX7R
C17
GND GND
Pin 42
0805
4.7uF16VX7R
C14
GND
0603
100nF50VX7R
C15
0603
10nF50VX7R
C18
GND GND
Pin 52
0603
100nF50VX7R
C8
0603
10nF50VX7R
C9
VSS_OSC VSS_OSCVSS_OSCN.M.
0805
2.2uF16VX7R
C7
Pin 56
0805
4.7uF16VX7R
C19
GND
0603
100nF50VX7R
C20
0603
10nF50VX7R
C23
GND GND
Pin 76
0805
4.7uF16VX7R
C21
GND
0603
100nF50VX7R
C22
0603
10nF50VX7R
C24
GND GND
Pin 98VDD_HV_IO_MAIN
VDD_HV_IO_MAIN
0R1/10W0805
R19
UM
2661 - Rev 1
page 15/23
UM
2661Schem
atics
Figure 7. Signals
S ign a ls
1-2 CLOSEDDEFAULT 2
13
J13
ESR0
RSTIN
ESR0
PORST
TP1
TCK
TP2 TP3 TP4
TMS/TxpTDI/Txn
TDO/RxpJCOMP/Rxn
TP5
PA0PA1PA2PA3PA4
PA10PA11PA12PA13
PA[0..15] PA[0..15]
PB1PB2PB3
PB8PB9PB10PB11
PB[0..15]PB0
PB[0..15]
PD0
PD4
PD6PD7PD8
PD10PD11PD12PD13
PD15
PD[0..15]PD[0..15]
PE5
PE0
PE6PE7
PE10PE11PE12
PE[0..15]PE[0..15]
PE1PE2PE3
PE9
PF2
PF[0..15]PF[0..15]
PF3PF13
PG6PG9
PG[0..15]PG[0..15]
PG12
PM4
PM[0..15]
PM6
PM[0..15]
PC0
PC2PC3PC4PC5PC6
PC10
PC13PC14PC15
PC7
PC9
PC[0..15] PC[0..15]
PC8
PC11
PORST
VDD_HV_IO_MAIN
EXTALXTALXTAL
EXTALJ15
GND
06031%
R710K
06031%
R510K DNP
default CLOSED
NOT MOUNTED06031%
R44K7
TESTMODE
PORST
PI1PI2PI3PI4
PI7
PI[0..15]PI[0..15]PH[0..15]PH[0..15]
BCTRL
1-2 CLOSED DEFAULTSOLDER JUMER
1
2
3JP2
PD14
Jumper setting
2-3 : Eiger1-2 : Chorus 1M & 4M
VDD_LV
1-2 CLOSEDDEFAULTSOLDER JUMER
1
2
3JP3
PA15VDD_LV
1-2 CLOSED DEFAULT
SOLDER JUMER1
2
3JP5
PI6
Jumper setting
2-3 : Eiger1-2 : Chorus 1M & 4M
VDD_LV
Jumper setting
2-3 : Chorus 4M & Eiger1-2 : Chorus 1M
Jumper setting
2-3 : Eiger1-2 : Chorus 1M & 4M
2-3 CLOSEDDEFAULT
PC12
Jumper setting
2-3 : Chorus 4M1-2 : Chorus 1M & Eiger
VDD_HV_IO_FLEX
1-2 CLOSEDDEFAULTSOLDER JUMER
1
2
3JP7
PM14
Jumper setting
2-3 : Eiger1-2 : Chorus 1M & 4M
Jumper setting
2-3 : Eiger1-2 : Chorus 1M & 4M
PA[0]81PA[1]78PA[2]77PA[3]48PA[4]66
PB[3]37
PB[10]45PB[11]44
PC[1]11PC[2]10PC[3]9PC[4]8
PC[7]5PC[8]4
PC[11]96
PC[15]92
PORST 67
TESTMODE 65XTAL 55
EXTAL 54
TCK / PA[6]64
TMS / PA[7]61
TDI / PA[8]60
TDO / PA[9]62
PA[10]82PA[11]83PA[12]79PA[13]80
PB[0]40PB[1]39PB[2]38
PB[8]47PB[9]46
PC[0]12
PC[5]7PC[6]6
PC[9]3PC[10]97
PC[13]94PC[14]93
SPC58xGxxE3 / SPC58xCxxE3 / SPC58xBxxE3Port Pins
JCOMP / PA[5]63PD[7] 58PD[8] 49
PD[10] 43PD[11] 36
PD[15] 2
PE[2] 15PE[3] 18
PE[5] 70PE[6] 71PE[7] 72
PE[11] 85
PD[0] 88
PD[4] 73PD[5] 74PD[6] 59
PD[12] 16PD[13] 17
PE[0] 13PE[1] 14
PE[9] 75PE[10] 84
PE[12] 91
PF[2] 100PF[3] 99
PF[13] 57
PG[6] 25PG[9] 32
PG[10] 33PG[11] 34PG[12] 35
PI[1] 21PI[2] 22PI[3] 23PI[4] 24PI[6] 26
PM[4] 89PM[6] 90
PA[15]50
PC[12]95
PD[14] 1
PH[4] / BCTRL 86
PI[7] 27
PM[14] / ESR068
DUT1B
CHORUS-TQFP100
STRIP2PMJ28
FCCU_F1 LABEL ON PCB
FCCU_F0 LABEL ON PCB
2
13J26
2-3 CLOSEDDEFAULT
2
13
J27
VDD_HV_IO_MAIN
PD5
BCTRL PH4
PG10PG11
ESR0 PC1
Jumper setting
2-3 : ESR0 Chorus 1M1-2 : PC[1]0603
1%
R64K7
ESR0
VDD_HV_IO_MAIN
1-2 CLOSEDDEFAULT
2
13 J14
UM
2661 - Rev 1
page 16/23
UM
2661Schem
atics
Figure 8. JTAG, Nexus interface, Reset and crystal oscillator
EXTAL
XTAL
EVB-EXTAL
ESR0
PORST
RST-MCU
OSC-MOD
EVB-EXTAL
EXTAL-SMA
RST-SW
VCC
GND
2 3
1417
74LVC125AMTR
U1A
I25 O2 6OE2
4
74LVC125AMTR
U1B
VDD_HV_IO_MAIN
VDD_HV_IO_MAIN
VDD_HV_IO_MAIN
VDD_HV_IO_MAIN3.3V_SR
VDD_HV_IO_MAIN
XTAL
EXTAL
ESR0
PORST
RST-SW
J TAG, Nexu s In t e r fa ce , Res e t a n d Cr ys t a l Os c i l la t or
GND
GND
GND
GNDGND
GND
GND
GND
(MCU Crystal Input)
(MCU Crystal Output)
1-2 CLOSEDDEFAULT
1-2 CLOSEDDEFAULT
default OPEN
1-2 CLOSEDDEFAULT
GNDdefault CLOSED
default CLOSED
default CLOSED
REMOVE XTAL jumper when driving EXTAL fromOscillator Module or External Source (PLL Enabled)
Connect XTAL jumper to GND when driving EXTAL fromOscilaltor Module or External Source (PLL Bypass Mode)
Note - External 3.3Vegulator MUST beenabled when usingoscillator module
Note - InternalPull-Up on Pin 1
SMA styleConnector
USER RESET LED
External Clock Input
MCU RESET LED
RESET
SO14
I39 O3 8OE3
10
74LVC125AMTR
U1C
SO14
SO14
NOT MOUNTED
NOT MOUNTED
2
13
STRIP3PMJ19
0R1/10W0603
R11
12
40MHzNX5032GA
XT1
0603
10pF DNP50V
COG/NP0
C49
0603
10pF DNP50V
COG/NP0
C51
0603100nF
50VX7R
C52
STRIP2PM
J20
2
13
STRIP3PMJ22
49R91/16W0603
1%
R18
EN1
GND2 OUT 3+Vs 4
8MHz7x5
OSC1 10K1/10W0603
R14
560R1/10W0603
R12
4K71/10W0603
R16
STRIP2PM
J29
Yellow0805
LD1 STRIP2PM
J21
STRIP2PM
J30
220R1/10W0603
R15
220R1/10W0603
R17
560R1/10W0603
R13
Red0805
LD2
2
13
STRIP3PMJ17
1
2
BNC-SMA-FEM-180J25
VSS_OSC
ENABLE
GND
VCC1
24
53
74V1G08STR
SOT23-5L
U2
RSTIN
TDI/TxnTDO/Rxp
TCK
JCOMP/Rxn
TMS/Txp
GND GND
GND
NOT MOUNTED
Jtag interface
TDI, TDO, TCK, TMS, JCOMP & RSTIN (PORST or ESR0)are not connected to daughter card.
JTAG Connector
NOT MOUNTED
GND
1 23 45 67 89 10
11 1213 14
N2514-6002RB
J16
10K1/10W0603
R10
10K DNP1/10W0603
R9
0603
27pF50V
COG/NP0
C48
0603
47pF DNP50V
COG/NP0
C47
VDD_HV_IO_MAIN VDD_HV_IO_MAIN
3.3V_SR
TDI/Txn
TCKTMS/Txp
TDO/Rxp
GND GND
Nexus interface
LVDS signals are not routed to motherboard.JTAG signals are not routed to motherboard.EVT signals have the option of adding a jumper ondaughtercard to route signals to motherboard.
GND
NOT MOUNTED
TX0P1TX0N3gnd5TX1P7TX1N9gnd11TX2P13TX2N15
+V 2TCK 4TMS 6TDI 8
TDO 10JCOMP 12EVTI1 14EVTI0 16
EVTO0 18RSTOUT 20
RSTIN 22gnd 24
CLKP 26CLKN 28
gnd 30
TX3P19
gnd23
gnd29n.c.25
gnd17
n.c.27
TX3N21
n.c.31 EVTO1 32n.c.33 n.c. 34SH1SH1 SH2 SH2
SAMTEC ASP-137973-01
J18
0603
47pF DNP50V
COG/NP0
C50
RSTINESR0
JCOMP/Rxn
PushbuttonSW1
UM
2661 - Rev 1
page 17/23
UM
2661Schem
atics
Figure 9. Daughter card to motherboard connectors
DAUGHTER CARD TO MOTHERBOARD CONNECTORS
PA8
PA14
PG2PG4PG6PG8PG10PG12PG145.0V_SR
PE2PE4PE6PE8
PE0
PE10PE12PE141.25V_SR
PC0PC2PC4
5.0V_SR
PC6PC8PC10PC12PC143.3V_SR
1.25V_SRPA0PA2PA4
PA10PA12
5.0V_SR
1.25V_SR
3.3V_SR
1.25V_SR
5.0V_SR
PA9
PG1PG3PG5PG7PG9PG11PG13PG155.0V_SR
PE1
PE11PE13PE151.25V_SR
PE5PE7PE9
PE3
PC1
PC5PC7
PC3
PC9PC11PC13PC153.3V_SR
1.25V_SR
PA3PA1
PA11PA13PA155.0V_SR
5.0V_SR
1.25V_SR
3.3V_SR
5.0V_SR
1.25V_SR
VDD_HV_IO_MAIN
5.0V_LR5.0V_LR
3.3V_SR3.3V_SR
5.0V_SR5.0V_SR
1.25V_SR1.25V_SR
VDD_HV_IO_MAINVDD_HV_IO_MAIN
5.0V_LR5.0V_LR
VDD_HV_IO_MAIN
3.3V_SR3.3V_SR
5.0V_SR5.0V_SR
1.25V_SR1.25V_SR
PE12
PF2
PG6
PG9PG10PG11PG12
PH4
PC0PC1
PC12PC13PC14PC15
PA0PA1PA2PA3PA4
PA10PA11PA12PA13
PA15
PB0PB1
PB8PB9PB10PB11
PD0
PD4PD5
PD8
PD10PD11PD12PD13PD14PD15
PE0PE1PE2PE3
PE5PE6PE7
PE9PE10PE11
1.25V_SR
5.0V_LR
3.3V_SR5.0V_SR
VDD_HV_IO_MAIN
PB15
1.25V_SR
5.0V_SR
3.3V_SR
1.25V_SR
3.3V_SR
PD7
PF13
1.25V_SR
1.25V_SR
PH3PH1
3.3V_SR
PF1
PF11
PF15
PF3PF5PF7PF9
5.0V_SRPD1PD3PD5
PD9PD11PD13PD153.3V_SR
PB1PB3PB5PB7PB9PB11PB13
PD6
3.3V_SR
PH0PH2PH4
1.25V_SR
PF0
PF10PF12PF14
3.3V_SR
PF2PF4PF6PF8
5.0V_SRPD0PD2PD4
PD8PD10PD12PD14
1.25V_SRPB0PB2PB4PB6PB8PB10PB12PB14
1.25V_SR
5.0V_SR
3.3V_SR
1.25V_SR
3.3V_SR
5.0V_LR
1.25V_SR1.25V_SR
5.0V_SR5.0V_SR
3.3V_SR3.3V_SR
VDD_HV_IO_MAIN
5.0V_LR
VDD_HV_IO_MAIN
5.0V_LR
1.25V_SR1.25V_SR
5.0V_SR5.0V_SR
3.3V_SR3.3V_SR
VDD_HV_IO_MAIN
5.0V_LR
VDD_HV_IO_MAIN
RST-SW
PD6PD7
PF13
3.3V_SR1.25V_SR 5.0V_LR5.0V_SR VDD_HV_IO_MAIN
RST-SW
PortE
GND
GNDGND
TP7
TP6
TP8 TP9
TP10
PA[0..15] PB[0..15] PC[0..15] PD[0..15] PE[0..15] PF[0..15] PG[0..15] PH[0..15]PA[0..15] PB[0..15] PC[0..15] PD[0..15] PE[0..15] PF[0..15] PG[0..15] PH[0..15]
PortA PortB PortC PortD PortF PortG PortH
1133557799111113131515171719192121232325252727292931313333353537373939414143434545474749495151535355555757595961616363656567676969717173737575777779798181838385858787898991919393959597979999101101103103105105107107109109111111113113115115117117119119
2 24 46 68 8
10 1012 1214 1416 1618 1820 2022 2224 2426 2628 2830 3032 3234 3436 3638 3840 4042 4244 4446 4648 4850 5052 5254 5456 5658 5860 6062 6264 6466 6668 6870 7072 7274 7476 7678 7880 8082 8284 8486 8688 8890 9092 9294 9496 9698 98
100 100102 102104 104106 106108 108110 110112 112114 114116 116118 118120 120
SAMTEC QSH-120-01-L-D-A
J23A
SH1SH1SH2SH2SH3SH3SH4SH4SH5SH5SH6SH6SH7SH7SH8SH8
SH9 SH9
121121123123125125127127129129131131133133135135137137139139141141143143145145147147149149151151153153155155157157159159161161163163165165167167169169171171173173175175177177179179181181183183185185187187189189191191193193195195197197199199201201203203205205207207209209211211213213215215217217219219221221223223225225227227229229231231233233235235237237239239
SH16 SH16SH15 SH15SH14 SH14SH13 SH13SH12 SH12SH11 SH11SH10 SH10
122 122124 124126 126128 128130 130132 132134 134136 136138 138140 140142 142144 144146 146148 148150 150152 152154 154156 156158 158160 160162 162164 164166 166168 168170 170172 172174 174176 176178 178180 180182 182184 184186 186188 188190 190192 192194 194196 196198 198200 200202 202204 204206 206208 208210 210212 212214 214216 216218 218220 220222 222224 224226 226228 228230 230232 232234 234236 236238 238240 240
SAMTEC QSH-120-01-L-D-A
J23B
1 13 35 57 79 911 1113 1315 1517 1719 1921 2123 2325 2527 2729 2931 3133 3335 3537 3739 3941 4143 4345 4547 4749 4951 5153 5355 5557 5759 5961 6163 6365 6567 6769 6971 7173 7375 7577 7779 7981 8183 8385 8587 8789 8991 9193 9395 9597 9799 99101 101103 103105 105107 107109 109111 111113 113115 115117 117119 119
22 44 66 88 1010 1212 1414 1616 1818 2020 2222 2424 2626 2828 3030 3232 3434 3636 3838 4040 4242 4444 4646 4848 5050 5252 5454 5656 5858 6060 6262 6464 6666 6868 7070 7272 7474 7676 7878 8080 8282 8484 8686 8888 9090 9292 9494 9696 9898 100100 102102 104104 106106 108108 110110 112112 114114 116116 118118 120120
SAMTEC QSH-120-01-L-D-A
J24A
SH1 SH1SH2 SH2SH3 SH3SH4 SH4SH5 SH5SH6 SH6SH7 SH7SH8 SH8
SH9SH9
121 121123 123125 125127 127129 129131 131133 133135 135137 137139 139141 141143 143145 145147 147149 149151 151153 153155 155157 157159 159161 161163 163165 165167 167169 169171 171173 173175 175177 177179 179181 181183 183185 185187 187189 189191 191193 193195 195197 197199 199201 201203 203205 205207 207209 209211 211213 213215 215217 217219 219221 221223 223225 225227 227229 229231 231233 233235 235237 237239 239
SH16SH16SH15SH15SH14SH14SH13SH13SH12SH12SH11SH11SH10SH10
122122 124124 126126 128128 130130 132132 134134 136136 138138 140140 142142 144144 146146 148148 150150 152152 154154 156156 158158 160160 162162 164164 166166 168168 170170 172172 174174 176176 178178 180180 182182 184184 186186 188188 190190 192192 194194 196196 198198 200200 202202 204204 206206 208208 210210 212212 214214 216216 218218 220220 222222 224224 226226 228228 230230 232232 234234 236236 238238 240240
SAMTEC QSH-120-01-L-D-A
J24B
PA5PA7PA6
PG0
PI0PH5
PH6 PH7PH8 PH9PH10 PH11PH12 PH13PH14
VDD_HV_IO_FLEXVDD_HV_IO_FLEXVDD_HV_IO_FLEX
PH15
PI3
VDD_HV_IO_FLEX
VDD_HV_IO_FLEX
TP11 TP12TP14TP13
PB2PB3
PC2PC3PC4PC5
PC8PC9PC10PC11
PC6PC7
PF3
PI[0..15] PI[0..15]
PortI
PI1PI2PI3PI4
PI6PI7
PM[0..15] PM[0..15]
PortM
PM4
PM6
TP15TP16
TP17
PI1PI2PI4
PI7PI5
PI6
PM4PM6
PM14
PM14
UM
2661 - Rev 1
page 18/23
UM
2661Schem
atics
Revision history
Table 11. Document revision history
Date Version Changes
08-Jan-2020 1 Initial release.
UM2661
UM2661 - Rev 1 page 19/23
Contents
1 Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2
1.1 Package contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
1.2 Supported device . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
2 SPC58XXADPT100S features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4
2.1 Mini module features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
2.2 Hardware dimension and PCB component view . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
2.3 Pin numbering for jumpers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
3 Hardware and jumper settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7
3.1 Power supplies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
3.2 Microcontrollers configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
3.3 Port configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
3.4 System clock configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
3.5 Reset circuit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
3.6 Test point . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
3.7 Connectors. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
4 BOM and schematics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13
4.1 BOM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
4.2 Schematics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Revision history . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19
Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20
List of tables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .21
List of figures. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22
UM2661Contents
UM2661 - Rev 1 page 20/23
List of tablesTable 1. Supply related jumpers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7Table 2. Microcontroller SPC58xCxxE3 configuration related jumpers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8Table 3. Microcontroller SPC582BxxE3, SPC584BxxE3 configuration related jumpers . . . . . . . . . . . . . . . . . . . . . . . . . . 8Table 4. Microcontroller SPC58xGxxE3 configuration related jumpers. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9Table 5. Port related jumpers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10Table 6. Main clock related jumpers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10Table 7. Reset related jumpers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11Table 8. Test points . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11Table 9. Connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12Table 10. Bill of material . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13Table 11. Document revision history . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
UM2661List of tables
UM2661 - Rev 1 page 21/23
List of figuresFigure 1. Overview of SPC58XXADPT100S mini module - top . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1Figure 2. Overview of SPC58XXADPT100S mini module - bottom . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2Figure 3. SPC58XXADPT100S top component view . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5Figure 4. SPC58XXADPT100S bottom component view . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6Figure 5. Selection jumper scheme. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6Figure 6. Power and decoupling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15Figure 7. Signals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16Figure 8. JTAG, Nexus interface, Reset and crystal oscillator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17Figure 9. Daughter card to motherboard connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
UM2661List of figures
UM2661 - Rev 1 page 22/23
IMPORTANT NOTICE – PLEASE READ CAREFULLY
STMicroelectronics NV and its subsidiaries (“ST”) reserve the right to make changes, corrections, enhancements, modifications, and improvements to STproducts and/or to this document at any time without notice. Purchasers should obtain the latest relevant information on ST products before placing orders. STproducts are sold pursuant to ST’s terms and conditions of sale in place at the time of order acknowledgement.
Purchasers are solely responsible for the choice, selection, and use of ST products and ST assumes no liability for application assistance or the design ofPurchasers’ products.
No license, express or implied, to any intellectual property right is granted by ST herein.
Resale of ST products with provisions different from the information set forth herein shall void any warranty granted by ST for such product.
ST and the ST logo are trademarks of ST. For additional information about ST trademarks, please refer to www.st.com/trademarks. All other product or servicenames are the property of their respective owners.
Information in this document supersedes and replaces information previously supplied in any prior versions of this document.
© 2020 STMicroelectronics – All rights reserved
UM2661
UM2661 - Rev 1 page 23/23
