Speakout RFID TagsRFID tags are used to label objects. With Milestone 312 you can read a tag and record a voice message for the object. When you read the tag again your voice message is played. You can use RFID tags to label different kinds of objects. Therefore the tags are available as stickers, cards and buttons. For each tag you can rerecord the voice message as many times you want.

TAGRO1 This small, round tag is adhesive and can be used like a sticker. The diameter is 24 mm (0.94 in). The tag is transparent but the antenna is visible. One package of TAGRO1 contains 20 units.

TAGSQ2 This square tag is adhesive and can be used like a sticker. The tag can be removed from objects several times like a Post-it. The tag is white and has a side length of 55 mm (2.16 in). Based on its size the tag has a good reading range of up to 4 cm (1.5 in).One package of TAGSQ2 contains 20 units.

TAGCD1 This small, round tag with a hole in the centre is adhesive and can be used like a sticker. This white tag is especially appropriate for labeling CDs and DVDs. The outside diameter is 35 mm (1.38 in). The hole in the centre of the tag has exactly the same diameter as the hole of a CD or DVD. The tag is added directly on the top side of the disc. Attention: In no case add the tag aside from the center of the disc. That results in an noncircular rotation of the disc and can damage your player.One package of TAGCD1 contains 20 units.

TAGCC1This square tag has the proportions of a credit card, 85 mm x 54 mm (3.35 x 2.13 in). Because of its size the white plastic tag has a good reading range of up to 4 cm (1.5 in). The tag is ideal to label objects as folders or other objects with pockets. The tag has a borehole to attach it to objects with an elastic strap. It can be frozen and is therefore suitable for the identification of frozen products.One package of TAGCC1 contains 12 units.

TAGLA1This tag is a a small button. Via its central hole it can be sewed-on your clothes. The beige plastic tag has a diameter of 15 mm (0.59 in) and a width of 2 mm (0.08 in). The tag can be washed with a temperature of up to 95 degree Celsius. In addition the tag can be frozen.For this tag special Velcro stickers (TAGVEL) are available to simplify the labeling to an object.One package of TAGLA1 contains 8 units.

TAGVELThese Velcro stickers are appropriate to attach a non-adhesive tag to an object. The ideal combination of TAGVEL is with the TAGLA1 tags.The Velcro stickers consist of a soft part (loop sticker) and a hard part (hook sticker). Stick the hook sticker on the tag and the loop sticker on the object.One package of TAGVEL contains 30 units of soft parts and 10 hard parts.

Attention: Please be aware that tags lying upon each other do not work and please also note that tags do not work on metal objects.