Date post: | 25-Jul-2016 |
Category: |
Documents |
Upload: | sun-valley-bronze |
View: | 245 times |
Download: | 9 times |
Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m14-1
Revised 02/08/16
INTERIOR MORTISE LOCK PASSAGE & PRIVACY SETS
CONTENTSThis section contains complete interior mortise lock sets and trim only interior mortise lock sets. Complete sets include bronze trim, medium duty interior mortise lock, spindle, fasteners and installation instructions. All complete interior mortise lock set part numbers begin with CS. Trim only sets include bronze trim, spindle, fasteners and installation instructions. No locks are included. All trim only interior mortise lock set part numbers begin with TS. Interior mortise lock trim sets can be machined to be compatible with most high quality mortise locks. The lock manufacturer, model number and function must be specified when ordering trim only sets.NOTE: Heavy duty interior mortise locks are available. Please specify and price accordingly. Hand Peened and Inlay orders do NOT qualify for return and are non-refundable.
TABLE OF CONTENTS:Emergency Release Keys Page 14-2 Bevel Edge Sectional Interior Mortise Sets Pages 14-3 – 14-26Contemporary Sectional Interior Mortise Sets Pages 14-27 – 14-50Novus Sectional Interior Mortise Sets Pages 14-51 – 14-74Bevel Edge Interior Mortise Lock Passage & Privacy Sets Pages 14-75 – 14-92Arch Interior Mortise Lock Passage & Privacy Sets Pages 14-93 – 14-110Oval Interior Mortise Lock Passage & Privacy Sets Pages 14-111 – 14-112Contemporary Interior Mortise Lock Passage & Privacy Sets Pages 14-113 – 14-134Fleur de Lis Interior Mortise Lock Passage & Privacy Sets Pages 14-135– 14-140Ridge Interior Mortise Lock Passage & Privacy Sets Pages 14-141 – 14-156Corrugated w/Band Interior Mortise Lock Passage & Privacy Sets Pages 14-157– 14-160Hampton Interior Mortise Lock Passage & Privacy Sets Pages 14-161– 14-166Trellis Interior Mortise Lock Passage & Privacy Sets Pages 14-167 – 14-172Deco Interior Mortise Lock Passage & Privacy Sets Pages 14-173– 14-176Corrugated Interior Mortise Lock Passage & Privacy Sets Pages 14-177 – 14-181Bandbox Interior Mortise Lock Passage & Privacy Sets Pages 14-182 – 14-192Hand Peened Interior Mortise Lock Passage & Privacy Sets Pages 14-193 – 14-200Horizontal Inlay Interior Mortise Lock Passage & Privacy Sets Pages 14-201 – 14-202Vertical Inlay Interior Mortise Lock Passage & Privacy Sets Pages 14-203 – 14-204Circles Interior Mortise Lock Passage & Privacy Sets Pages 14-205– 14-206Squares Interior Mortise Lock Passage & Privacy Sets Pages 14-207 – 14-208Corduroy Interior Mortise Lock Passage & Privacy Sets Pages 14-209– 14-218Mesa Interior Mortise Lock Passage & Privacy Sets Pages 14-219 – 14-230Burlap Interior Mortise Lock Passage & Privacy Sets Pages 14-231 – 14-236Novus Interior Mortise Lock Passage & Privacy Sets Pages 14-237 – 14-256Ridge Burlap Interior Mortise Lock Passage & Privacy Sets Pages 14-257 – 14-262
ORDERING INSTRUCTIONS:Complete Sets and Trim Sets: See Ordering Instructions in Binder 1/ Dealer Information. Custom Sets: See Custom Ordering Instructions in Binder 1/ Dealer Information.
DOOR HANDING GUIDE:
Right Hand (RH)Left Hand (LH)OUTSIDE
INSIDE
Right Hand Reverse (RHR)Left Hand Reverse (LHR)OUTSIDE
INSIDE
Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m
PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.
14-2
Revised 02/08/16
Illustrations are for demonstration purposes only.
EMERGENCY RELEASE KEYS
Emergency release keys.
ERK-302 – Emergency release key.
1 1/2"
1 1/
4"
ERK-900 – Emergency release key.
1 3/8"
1 1/
4"
ERK-741 – Emergency release key.
1 3/8"
1 3/
8"
ERK-306 – Emergency release key.
1 3/8"
1 5/
16"
ERK-HP306 – Hand Peened emergency
release key.
1 3/8"
1 5/
16"
1"
ERK-326 – Emergency release key.
15/16"
1 1/
2"
ERK-761 – Emergency release key.
1 3/8"1
3/8"
ERK-767 – Emergency release key.
1 3/8"
13/1
6"
ERK-W1600 – Inlay emergency
release key.
1 3/8"
1 1/
4"
3/8"
ERK-W1601 – Inlay emergency
release key.
1 3/8"
1 3/
8"
3/16"
3/8"
3/16"
ERK-302 1 1/2” x 1 1/4” Emergency release key.
ERK-306 1 3/8” x 1 5/16” Emergency release key.
ERK-HP306 1 3/8” x 1 5/16” Hand Peened emergency release key.
ERK-326 1 5/16” x 1 1/2” Emergency release key.
ERK-741 1 3/8” x 1 3/8” Emergency release key.
ERK-761 1 3/8” x 1 3/8” Emergency release key.
ERK-767 1 3/8” x 13/16” Emergency release key.
ERK-900 1 3/8” x 1 1/4” Emergency release key.
ERK-W1600 1 3/8” x 1 1/4” Inlay emergency release key.
ERK-W1601 1 3/8” x 1 3/8” Inlay emergency release key.
Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m
PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.
14-3
Revised 02/08/16
Illustrations are for demonstration purposes only. Any knob, lever or ring pull can be combined with any style or size escutcheon plate.
225 BEVEL EDGE SECTIONAL INTERIOR MORTISE SETS
Complete sets with interior mortise lock and spindle. IML dummy trim screws are horizontal unless specified vertical (no charge).2 1/4” center-to-center.
Specify manufacturer & function of interior mortise lock.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.Note: Thru-bolt only.
Trim sets for interior mortise locks with spindle, no lock included. IML dummy trim screws are horizontal unless specified vertical (no charge). 2 1/4” center-to-center.
2 1/2” or 2 3/4” backset standard.Custom backsets available. Call for options and pricing.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.Note: Thru-bolt only.
CS-225IML – Complete passage set with
interior mortise lock and spindle. OR TS-225IML – Trim set only. No lock.
CS-225IML-PR – Complete privacy set with
interior mortise lock and spindle. OR TS-225IML-PR – Trim set only. No lock.
CS-225IML-PR-RC – Complete privacy set with
interior mortise lock and spindle. OR TS-225IML-PR-RC – Trim set only. No lock.
TS-225IML-FD – Trim set only. – Full dummy.
2 1/
4"
1 5/8"
2 1/4"
2 1/
4"
2 1/
4"
1 5/8"
2 1/
4"
2 1/4"2 1/4"
TS-225IML-HD – Trim set only. – Half dummy.
2 1/
4"
2 1/4"2 1/4"
1 5/8"
2 1/
4" 2 1/
4"
1/4"
3/4"
1"
CS-225IML Passage set. Lever/knob x lever/knob interior mortise lock set. Sectional. P-225 (ext) P-225 (int)
CS-225IML-PR Privacy set. Lever/knob x lever/knob interior mortise lock set. Sectional. P-225 w/157ERC (ext) P-225 w/158TPC (int)
CS-225IML-PR-RC Privacy set. Lever/knob x lever/knob interior mortise lock set. Sectional. P-225 w/RC-4 (ext) P-225 w/158TPC (int)
TS-225IML-FD Full dummy set. Lever/knob x lever/knob interior mortise lock set. Sectional. P-225D (ext) P-225D (int)
TS-225IML-HD Half dummy set. Lever/knob interior mortise lock set. Sectional. P-225D
TS-225IML Passage set. Lever/knob x lever/knob interior mortise lock set. Sectional. P-225 (ext) P-225 (int)
TS-225IML-PR Privacy set. Lever/knob x lever/knob interior mortise lock set. Sectional. P-225 w/157ERC (ext) P-225 w/158TPC (int)
TS-225IML-PR-RC Privacy set. Lever/knob x lever/knob interior mortise lock set. Sectional. P-225 w/RC-4 (ext) P-225 w/158TPC (int)
TS-225IML-FD Full dummy set. Lever/knob x lever/knob interior mortise lock set. Sectional. P-225D (ext) P-225D (int)
TS-225IML-HD Half dummy set. Lever/knob interior mortise lock set. Sectional. P-225D
Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m
PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.
14-4
Revised 02/08/16
Illustrations are for demonstration purposes only. Any knob, lever or ring pull can be combined with any style or size escutcheon plate.
RP225 BEVEL EDGE SECTIONAL INTERIOR MORTISE SETS
Complete sets with interior mortise lock and spindle. IML dummy trim screws are horizontal unless specified vertical (no charge).2 1/4” center-to-center.
Trim sets for interior mortise locks with spindle, no lock included. IML dummy trim screws are horizontal unless specified vertical (no charge). 2 1/4” center-to-center.
2 1/2” or 2 3/4” backset standard.Custom backsets available. Call for options and pricing.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.Note: Thru-bolt only.
Specify manufacturer & function of interior mortise lock.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.Note: Thru-bolt only.
1 5/8" 1 5/8"
2 1/
4"
CS-RP225IML – Complete passage set with
interior mortise lock and spindle. OR TS-RP225IML – Trim set only. No lock.
CS-RP225IML-PR – Complete privacy set with
interior mortise lock and spindle. OR TS-RP225IML-PR – Trim set only. No lock.
CS-RP225IML-PR-RC – Complete privacy set with
interior mortise lock and spindle. OR TS-RP225IML-PR-RC – Trim set only. No lock.
TS-RP225IML-FD – Trim set only. – Full dummy.
TS-RP225IML-HD – Trim set only. – Half dummy.
2 1/
4"
2 1/
4"
2 1/
4"
2 1/
4"2 1/
4"
2 1/
4"
1/4"
3/4"
1"
1 5/8"
2 1/4" 2 1/4" 2 1/4" 2 1/4" 2 1/4"
CS-RP225IML Passage set. Lever/knob x lever/knob interior mortise lock set. Sectional. RP-225 (ext) RP-225 (int)
CS-RP225IML-PR Privacy set. Lever/knob x lever/knob interior mortise lock set. Sectional. RP-225 w/RP-157ERC (ext) RP-225 w/RP-158TPC (int)
CS-RP225IML-PR-RC Privacy set. Lever/knob x lever/knob interior mortise lock set. Sectional. RP-225 w/RC-4 (ext) RP-225 w/RP-158TPC (int)
TS-RP225IML-FD Full dummy set. Lever/knob x lever/knob interior mortise lock set. Sectional. RP-225D (ext) RP-225D (int)
TS-RP225IML-HD Half dummy set. Lever/knob interior mortise lock set. Sectional. RP-225D
TS-RP225IML Passage set. Lever/knob x lever/knob interior mortise lock set. Sectional. RP-225 (ext) RP-225 (int)
TS-RP225IML-PR Privacy set. Lever/knob x lever/knob interior mortise lock set. Sectional. RP-225 w/RP-157ERC (ext) RP-225 w/RP-158TPC (int)
TS-RP225IML-PR-RC Privacy set. Lever/knob x lever/knob interior mortise lock set. Sectional. RP-225 w/RC-4 (ext) RP-225 w/RP-158TPC (int)
TS-RP225IML-FD Full dummy set. Lever/knob x lever/knob interior mortise lock set. Sectional. RP-225D (ext) RP-225D (int)
TS-RP225IML-HD Half dummy set. Lever/knob interior mortise lock set. Sectional. RP-225D
Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m
PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.
14-5
Revised 02/08/16
Illustrations are for demonstration purposes only. Any knob, lever or ring pull can be combined with any style or size escutcheon plate.
F225 BEVEL EDGE SECTIONAL INTERIOR MORTISE SETS
Complete sets with interior mortise lock and spindle. IML dummy trim screws are horizontal unless specified vertical (no charge).2 1/4” center-to-center.
Trim sets for interior mortise locks with spindle, no lock included. IML dummy trim screws are horizontal unless specified vertical (no charge). 2 1/4” center-to-center.
2 1/2” or 2 3/4” backset standard.Custom backsets available. Call for options and pricing.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.Note: Thru-bolt only.
Specify manufacturer & function of interior mortise lock.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.Note: Thru-bolt only.
CS-F225IML – Complete passage set with
interior mortise lock and spindle. OR TS-F225IML – Trim set only. No lock.
CS-F225IML-PR – Complete privacy set with
interior mortise lock and spindle. OR TS-F225IML-PR – Trim set only. No lock.
CS-F225IML-PR-RC – Complete privacy set with
interior mortise lock and spindle. OR TS-F225IML-PR-RC – Trim set only. No lock.
TS-F225IML-FD – Trim set only. – Full dummy.
2 1/
4"
1 5/8"
2 1/4"
2 1/
4" 2 1/
4"
1 5/8"
2 1/
4"
2 1/4"2 1/4"
TS-F225IML-HD – Trim set only. – Half dummy.
2 1/
4"
2 1/4"2 1/4"
1 5/8"
2 1/
4"
2 1/
4"
1/4"
3/4"
1"
2 1/4" 2 1/4" 2 1/4" 2 1/4"
CS-F225IML Passage set. Lever/knob x lever/knob interior mortise lock set. Sectional. P-225 (ext) P-225 (int)
CS-F225IML-PR Privacy set. Lever/knob x lever/knob interior mortise lock set. Sectional. P-225 w/157ERC (ext) P-225 w/158TPC (int)
CS-F225IML-PR-RC Privacy set. Lever/knob x lever/knob interior mortise lock set. Sectional. P-225 w/RC-4 (ext) P-225 w/158TPC (int)
TS-F225IML-FD Full dummy set. Lever/knob x lever/knob interior mortise lock set. Sectional. P-225D (ext) P-225D (int)
TS-F225IML-HD Half dummy set. Lever/knob interior mortise lock set. Sectional. P-225D
TS-F225IML Passage set. Lever/knob x lever/knob interior mortise lock set. Sectional. P-225 (ext) P-225 (int)
TS-F225IML-PR Privacy set. Lever/knob x lever/knob interior mortise lock set. Sectional. P-225 w/157ERC (ext) P-225 w/158TPC (int)
TS-F225IML-PR-RC Privacy set. Lever/knob x lever/knob interior mortise lock set. Sectional. P-225 w/RC-4 (ext) P-225 w/158TPC (int)
TS-F225IML-FD Full dummy set. Lever/knob x lever/knob interior mortise lock set. Sectional. P-225D (ext) P-225D (int)
TS-F225IML-HD Half dummy set. Lever/knob interior mortise lock set. Sectional. P-225D
Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m
PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.
14-6
Revised 02/08/16
Illustrations are for demonstration purposes only. Any knob, lever or ring pull can be combined with any style or size escutcheon plate.
F-RP225 BEVEL EDGE SECTIONAL INTERIOR MORTISE SETS
Complete sets with interior mortise lock and spindle. IML dummy trim screws are horizontal unless specified vertical (no charge).2 1/4” center-to-center.
Trim sets for interior mortise locks with spindle, no lock included. IML dummy trim screws are horizontal unless specified vertical (no charge). 2 1/4” center-to-center.
2 1/2” or 2 3/4” backset standard.Custom backsets available. Call for options and pricing.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.Note: Thru-bolt only.
Specify manufacturer & function of interior mortise lock.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.Note: Thru-bolt only.
1 5/8" 1 5/8"
2 1/
4"
CS-F-RP225IML – Complete passage set with
interior mortise lock and spindle. OR TS-F-RP225IML – Trim set only. No lock.
CS-F-RP225IML-PR – Complete privacy set with
interior mortise lock and spindle. OR TS-F-RP225IML-PR – Trim set only. No lock.
CS-F-RP225IML-PR-RC – Complete privacy set with
interior mortise lock and spindle. OR TS-F-RP225IML-PR-RC – Trim set only. No lock.
TS-F-RP225IML-FD – Trim set only. – Full dummy.
TS-F-RP225IML-HD – Trim set only. – Half dummy.
2 1/
4"
2 1/
4"
2 1/
4"
2 1/
4"
2 1/
4"
2 1/
4"
1"
1/4"
3/4"
2 1/4" 2 1/4" 2 1/4" 2 1/4" 2 1/4" 2 1/4" 2 1/4" 2 1/4" 2 1/4"
1 5/8"
CS-F-RP225IML Passage set. Lever/knob x lever/knob interior mortise lock set. Sectional. RP-225 (ext) RP-225 (int)
CS-F-RP225IML-PR Privacy set. Lever/knob x lever/knob interior mortise lock set. Sectional. RP-225 w/RP-157ERC (ext) RP-225 w/RP-158TPC (int)
CS-F-RP225IML-PR-RC Privacy set. Lever/knob x lever/knob interior mortise lock set. Sectional. RP-225 w/RC-4 (ext) RP-225w/RP-158TPC (int)
TS-F-RP225IML-FD Full dummy set. Lever/knob x lever/knob interior mortise lock set. Sectional. RP-225D (ext) RP-225D (int)
TS-F-RP225IML-HD Half dummy set. Lever/knob interior mortise lock set. Sectional. RP-225D
TS-F-RP225IML Passage set. Lever/knob x lever/knob interior mortise lock set. Sectional. RP-225 (ext) RP-225 (int)
TS-F-RP225IML-PR Privacy set. Lever/knob x lever/knob interior mortise lock set. Sectional. RP-225 w/RP-157ERC (ext) RP-225 w/RP-158TPC (int)
TS-F-RP225IML-PR-RC Privacy set. Lever/knob x lever/knob interior mortise lock set. Sectional. RP-225 w/RC-4 (ext) RP-225 w/RP-158TPC (int)
TS-F-RP225IML-FD Full dummy set. Lever/knob x lever/knob interior mortise lock set. Sectional. RP-225D (ext) RP-225D (int)
TS-F-RP225IML-HD Half dummy set. Lever/knob interior mortise lock set. Sectional. RP-225D
Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m
PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.
14-7
Revised 02/08/16
Illustrations are for demonstration purposes only. Any knob, lever or ring pull can be combined with any style or size escutcheon plate.
402 BEVEL EDGE SECTIONAL INTERIOR MORTISE SETS
Complete sets with interior mortise lock and spindle. IML dummy trim screws are horizontal unless specified vertical (no charge).2 1/4” center-to-center.
Trim sets for interior mortise locks with spindle, no lock included. IML dummy trim screws are horizontal unless specified vertical (no charge). 2 1/4” center-to-center.
2 1/2” or 2 3/4” backset standard.Custom backsets available. Call for options and pricing.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.Note: Thru-bolt only.
Specify manufacturer & function of interior mortise lock.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.Note: Thru-bolt only.
2 1/2"
2 1/
2"
1 5/8"
CS-402IML – Complete passage set with
interior mortise lock and spindle. OR TS-402IML – Trim set only. No lock.
CS-402IML-PR – Complete privacy set with
interior mortise lock and spindle. OR TS-402IML-PR – Trim set only. No lock.
CS-402IML-PR-RC – Complete privacy set with
interior mortise lock and spindle. OR TS-402IML-PR-RC – Trim set only. No lock.
TS-402IML-FD – Trim set only. – Full dummy.
1 5/8"
2 1/
4"
TS-402IML-HD – Trim set only. – Half dummy.
1 5/8"
2 1/
2"
2 1/
2"
2 1/2"
2 1/
2"
2 1/2"
2 1/
2"
2 1/2" 2 1/2"
2 1/
4"
1"
1/8"
3/4"
CS-402IML Passage set. Lever/knob x lever/knob interior mortise lock set. Sectional. P-402 (ext) P-402 (int)
CS-402IML-PR Privacy set. Lever/knob x lever/knob interior mortise lock set. Sectional. P-402 w/157ERC (ext) P-402 w/158TPC (int)
CS-402IML-PR-RC Privacy set. Lever/knob x lever/knob interior mortise lock set. Sectional. P-402 w/RC-4 (ext) P-402 w/158TPC (int)
TS-402IML-FD Full dummy set. Lever/knob x lever/knob interior mortise lock set. Sectional. P-402D (ext) P-402D (int)
TS-402IML-HD Half dummy set. Lever/knob interior mortise lock set. Sectional. P-402D
TS-402IML Passage set. Lever/knob x lever/knob interior mortise lock set. Sectional. P-402 (ext) P-402 (int)
TS-402IML-PR Privacy set. Lever/knob x lever/knob interior mortise lock set. Sectional. P-402 w/157ERC (ext) P-402 w/158TPC (int)
TS-402IML-PR-RC Privacy set. Lever/knob x lever/knob interior mortise lock set. Sectional. P-402 w/RC-4 (ext) P-402 w/158TPC (int)
TS-402IML-FD Full dummy set. Lever/knob x lever/knob interior mortise lock set. Sectional. P-402D (ext) P-402D (int)
TS-402IML-HD Half dummy set. Lever/knob interior mortise lock set. Sectional. P-402D
Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m
PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.
14-8
Revised 02/08/16
Illustrations are for demonstration purposes only. Any knob, lever or ring pull can be combined with any style or size escutcheon plate.
RP402 BEVEL EDGE SECTIONAL INTERIOR MORTISE SETS
Complete sets with interior mortise lock and spindle. IML dummy trim screws are horizontal unless specified vertical (no charge).2 1/4” center-to-center.
Trim sets for interior mortise locks with spindle, no lock included. IML dummy trim screws are horizontal unless specified vertical (no charge). 2 1/4” center-to-center.
2 1/2” or 2 3/4” backset standard.Custom backsets available. Call for options and pricing.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.Note: Thru-bolt only.
Specify manufacturer & function of interior mortise lock.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.Note: Thru-bolt only.
2 1/2"
2 1/
2"
1 5/8" 1 5/8"
CS-RP402IML – Complete passage set with
interior mortise lock and spindle. OR TS-RP402IML – Trim set only. No lock.
CS-RP402IML-PR – Complete privacy set with
interior mortise lock and spindle. OR TS-RP402IML-PR – Trim set only. No lock.
CS-RP402IML-PR-RC – Complete privacy set with
interior mortise lock and spindle. OR TS-RP402IML-PR-RC – Trim set only. No lock.
TS-RP402IML-FD – Trim set only. – Full dummy.
TS-RP402IML-HD – Trim set only. – Half dummy.
2 1/
4"
2 1/
4"
2 1/2"
2 1/
2"
2 1/
2"
2 1/2"
2 1/
2"
2 1/2" 2 1/2"
2 1/
2"
1"
1/8"
3/4"1 5/8"
CS-RP402IML Passage set. Lever/knob x lever/knob interior mortise lock set. Sectional. RP-402 (ext) RP-402 (int)
CS-RP402IML-PR Privacy set. Lever/knob x lever/knob interior mortise lock set. Sectional. RP-402 w/RP-157ERC (ext) RP-402 w/RP-158TPC (int)
CS-RP402IML-PR-RC Privacy set. Lever/knob x lever/knob interior mortise lock set. Sectional. RP-402 w/RC-4 (ext) RP-402 w/RP-158TPC (int)
TS-RP402IML-FD Full dummy set. Lever/knob x lever/knob interior mortise lock set. Sectional. RP-402D (ext) RP-402D (int)
TS-RP402IML-HD Half dummy set. Lever/knob interior mortise lock set. Sectional. RP-402D
TS-RP402IML Passage set. Lever/knob x lever/knob interior mortise lock set. Sectional. RP-402 (ext) RP-402 (int)
TS-RP402IML-PR Privacy set. Lever/knob x lever/knob interior mortise lock set. Sectional. RP-402 w/RP-157ERC (ext) RP-402 w/RP-158TPC (int)
TS-RP402IML-PR-RC Privacy set. Lever/knob x lever/knob interior mortise lock set. Sectional. RP-402 w/RC-4 (ext) RP-402 w/RP-158TPC (int)
TS-RP402IML-FD Full dummy set. Lever/knob x lever/knob interior mortise lock set. Sectional. RP-402D (ext) RP-402D (int)
TS-RP402IML-HD Half dummy set. Lever/knob interior mortise lock set. Sectional. RP-402D
Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m
PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.
14-9
Revised 02/08/16
Illustrations are for demonstration purposes only. Any knob, lever or ring pull can be combined with any style or size escutcheon plate.
F402 BEVEL EDGE SECTIONAL INTERIOR MORTISE SETS
Complete sets with interior mortise lock and spindle. IML dummy trim screws are horizontal unless specified vertical (no charge).2 1/4” center-to-center.
Trim sets for interior mortise locks with spindle, no lock included. IML dummy trim screws are horizontal unless specified vertical (no charge). 2 1/4” center-to-center.
2 1/2” or 2 3/4” backset standard.Custom backsets available. Call for options and pricing.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.Note: Thru-bolt only.
Specify manufacturer & function of interior mortise lock.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.Note: Thru-bolt only.
2 1/2"2
1/2"
1 5/8"
CS-F402IML – Complete passage set with
interior mortise lock and spindle. OR TS-F402IML – Trim set only. No lock.
CS-F402IML-PR – Complete privacy set with
interior mortise lock and spindle. OR TS-F402IML-PR – Trim set only. No lock.
CS-F402IML-PR-RC – Complete privacy set with
interior mortise lock and spindle. OR TS-F402IML-PR-RC – Trim set only. No lock.
TS-F402IML-FD – Trim set only. – Full dummy.
1 5/8"
2 1/
4"
TS-F402IML-HD – Trim set only. – Half dummy.
1 5/8"
2 1/
2"
2 1/
2"
2 1/2"
2 1/
2"
2 1/2"
2 1/
2"
2 1/2" 2 1/2"
2 1/
4"
1"
1/8"
3/4"
2 1/2" 2 1/2" 2 1/2" 2 1/2"
CS-F402IML Passage set. Lever/knob x lever/knob interior mortise lock set. Sectional. P-402 (ext) P-402 (int)
CS-F402IML-PR Privacy set. Lever/knob x lever/knob interior mortise lock set. Sectional. P-402 w/157ERC (ext) P-402 w/158TPC (int)
CS-F402IML-PR-RC Privacy set. Lever/knob x lever/knob interior mortise lock set. Sectional. P-402 w/RC-4 (ext) P-402 w/158TPC (int)
TS-F402IML-FD Full dummy set. Lever/knob x lever/knob interior mortise lock set. Sectional. P-402D (ext) P-402D (int)
TS-F402IML-HD Half dummy set. Lever/knob interior mortise lock set. Sectional. P-402D
TS-F402IML Passage set. Lever/knob x lever/knob interior mortise lock set. Sectional. P-402 (ext) P-402 (int)
TS-F402IML-PR Privacy set. Lever/knob x lever/knob interior mortise lock set. Sectional. P-402 w/157ERC (ext) P-402 w/158TPC (int)
TS-F402IML-PR-RC Privacy set. Lever/knob x lever/knob interior mortise lock set. Sectional. P-402 w/RC-4 (ext) P-402 w/158TPC (int)
TS-F402IML-FD Full dummy set. Lever/knob x lever/knob interior mortise lock set. Sectional. P-402D (ext) P-402D (int)
TS-F402IML-HD Half dummy set. Lever/knob interior mortise lock set. Sectional. P-402D
Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m
PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.
14-10
Revised 02/08/16
Illustrations are for demonstration purposes only. Any knob, lever or ring pull can be combined with any style or size escutcheon plate.
F-RP402 BEVEL EDGE SECTIONAL INTERIOR MORTISE SETS
Complete sets with interior mortise lock and spindle. IML dummy trim screws are horizontal unless specified vertical (no charge).2 1/4” center-to-center.
Trim sets for interior mortise locks with spindle, no lock included. IML dummy trim screws are horizontal unless specified vertical (no charge). 2 1/4” center-to-center.
2 1/2” or 2 3/4” backset standard.Custom backsets available. Call for options and pricing.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.Note: Thru-bolt only.
Specify manufacturer & function of interior mortise lock.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.Note: Thru-bolt only.
2 1/2"
2 1/
2"
1 5/8" 1 5/8"
CS-F-RP402IML – Complete passage set with
interior mortise lock and spindle. OR TS-F-RP402IML – Trim set only. No lock.
CS-F-RP402IML-PR – Complete privacy set with
interior mortise lock and spindle. OR TS-F-RP402IML-PR – Trim set only. No lock.
CS-F-RP402IML-PR-RC – Complete privacy set with
interior mortise lock and spindle. OR TS-F-RP402IML-PR-RC – Trim set only. No lock.
TS-F-RP402IML-FD – Trim set only. – Full dummy.
TS-F-RP402IML-HD – Trim set only. – Half dummy.
2 1/
4"
2 1/
4"
2 1/2"
2 1/
2"
2 1/
2"
2 1/2"
2 1/
2"
2 1/2" 2 1/2"
2 1/
2"
1/8"
3/4"
1"
2 1/2" 2 1/2" 2 1/2" 2 1/2"
1 5/8"
CS-F-RP402IML Passage set. Lever/knob x lever/knob interior mortise lock set. Sectional. RP-402 (ext) RP-402 (int)
CS-F-RP402IML-PR Privacy set. Lever/knob x lever/knob interior mortise lock set. Sectional. RP-402 w/RP-157ERC (ext) RP-402 w/RP-158TPC (int)
CS-F-RP402IML-PR-RC Privacy set. Lever/knob x lever/knob interior mortise lock set. Sectional. RP-402 w/RC-4 (ext) RP-402 w/RP-158TPC (int)
TS-F-RP402IML-FD Full dummy set. Lever/knob x lever/knob interior mortise lock set. Sectional. RP-402D (ext) RP-402D (int)
TS-F-RP402IML-HD Half dummy set. Lever/knob interior mortise lock set. Sectional. RP-402D
TS-F-RP402IML Passage set. Lever/knob x lever/knob interior mortise lock set. Sectional. RP-402 (ext) RP-402 (int)
TS-F-RP402IML-PR Privacy set. Lever/knob x lever/knob interior mortise lock set. Sectional. RP-402 w/RP-157ERC (ext) RP-402 w/RP-158TPC (int)
TS-F-RP402IML-PR-RC Privacy set. Lever/knob x lever/knob interior mortise lock set. Sectional. RP-402 w/RC-4 (ext) RP-402 w/RP-158TPC (int)
TS-F-RP402IML-FD Full dummy set. Lever/knob x lever/knob interior mortise lock set. Sectional. RP-402D (ext) RP-402D (int)
TS-F-RP402IML-HD Half dummy set. Lever/knob interior mortise lock set. Sectional. RP-402D
Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m
PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.
14-11
Revised 02/08/16
Illustrations are for demonstration purposes only. Any knob, lever or ring pull can be combined with any style or size escutcheon plate.
225-8 BEVEL EDGE SECTIONAL INTERIOR MORTISE SETS
Complete sets with interior mortise lock and spindle. IML dummy trim screws are horizontal unless specified vertical (no charge).
Trim sets for interior mortise locks with spindle, no lock included. IML dummy trim screws are horizontal unless specified vertical (no charge).
2 1/2” or 2 3/4” backset standard.Custom backsets available. Call for options and pricing.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.Note: Thru-bolt only.
Specify manufacturer & function of interior mortise lock.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.Note: Thru-bolt only.
CS-225-8IML – Complete passage set with
interior mortise lock and spindle. OR TS-225-8IML – Trim set only. No lock.
TS-225-8IML-FD – Trim set only. – Full dummy.
2 1/
4"
2 1/4"
2 1/
4"
2 1/4"2 1/4"
TS-225-8IML-HD – Trim set only. – Half dummy.
2 1/
4"
2 1/4"2 1/4"
CS-225-8IML Passage set. Lever/knob x lever/knob interior mortise lock set. Sectional. P-225 (ext) P-225 (int)
TS-225-8IML-FD Full dummy set. Lever/knob x lever/knob interior mortise lock set. Sectional. P-225D (ext) P-225D (int)
TS-225-8IML-HD Half dummy set. Lever/knob interior mortise lock set. Sectional. P-225D
TS-225-8IML Passage set. Lever/knob x lever/knob interior mortise lock set. Sectional. P-225 (ext) P-225 (int)
TS-225-8IML-FD Full dummy set. Lever/knob x lever/knob interior mortise lock set. Sectional. P-225D (ext) P-225D (int)
TS-225-8IML-HD Half dummy set. Lever/knob interior mortise lock set. Sectional. P-225D
Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m
PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.
14-12
Revised 02/08/16
Illustrations are for demonstration purposes only. Any knob, lever or ring pull can be combined with any style or size escutcheon plate.
225-8 BEVEL EDGE SECTIONAL INTERIOR MORTISE SETS
Complete sets with interior mortise lock and spindle. IML dummy trim screws are horizontal unless specified vertical (no charge).2 7/8” center-to-center.
Trim sets for interior mortise locks with spindle, no lock included. IML dummy trim screws are horizontal unless specified vertical (no charge). 2 7/8” center-to-center.
2 1/2” or 2 3/4” backset standard.Custom backsets available. Call for options and pricing.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.Note: Thru-bolt only.
Specify manufacturer & function of interior mortise lock.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.Note: Thru-bolt only.
CS-225-8x158IML-PR – Complete privacy set with
interior mortise lock and spindle. OR TS-225-8x158IML-PR – Trim set only. No lock.
CS-225-8x175IML-PR – Complete privacy set with
interior mortise lock and spindle. OR TS-225-8x175IML-PR – Trim set only. No lock.
CS-225-8x200IML-PR – Complete privacy set with
interior mortise lock and spindle. OR TS-225-8x200IML-PR – Trim set only. No lock.
CS-225-8x225IML-PR – Complete privacy set with
interior mortise lock and spindle. OR
TS-225-8x225IML-PR – Trim set only. No lock.
1 3/4"
2 1/
4"
2 1/
4"
1 3/4"
2 1/
4"
1 5/8"
2 7/
8"
1 5/8"2
1/4" 2
7/8"
2 7/
8"
2 7/
8"
2 1/4" 2 1/4"2"2"
11/1
6"
13/1
6"
7/8"
9/16
"
CS-225-8x158IML-PR Privacy set. Lever/knob x lever/knob interior mortise lock set. Sectional. P-225 w/157ERC (ext) P-225 w/158TPC (int)
CS-225-8x175IML-PR Privacy set. Lever/knob x lever/knob interior mortise lock set. Sectional. P-225 w/174ERC (ext) P-225 w/175TPC (int)
CS-225-8x200IML-PR Privacy set. Lever/knob x lever/knob interior mortise lock set. Sectional. P-225 w/199ERC (ext) P-225 w/200TPC (int)
CS-225-8x225IML-PR Privacy set. Lever/knob x lever/knob interior mortise lock set. Sectional. P-225 w/442ERC (ext) P-225 w/443TPC (int)
TS-225-8x158IML-PR Privacy set. Lever/knob x lever/knob interior mortise lock set. Sectional. P-225 w/157ERC (ext) P-225 w/158TPC (int)
TS-225-8x175IML-PR Privacy set. Lever/knob x lever/knob interior mortise lock set. Sectional. P-225 w/174ERC (ext) P-225 w/175TPC (int)
TS-225-8x200IML-PR Privacy set. Lever/knob x lever/knob interior mortise lock set. Sectional. P-225 w/199ERC (ext) P-225 w/200TPC (int)
TS-225-8x225IML-PR Privacy set. Lever/knob x lever/knob interior mortise lock set. Sectional. P-225 w/442ERC (ext) P-225 w/443TPC (int)
Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m
PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.
14-13
Revised 02/08/16
Illustrations are for demonstration purposes only. Any knob, lever or ring pull can be combined with any style or size escutcheon plate.
RP225-8 BEVEL EDGE SECTIONAL INTERIOR MORTISE SETS
Complete sets with interior mortise lock and spindle. IML dummy trim screws are horizontal unless specified vertical (no charge).
Trim sets for interior mortise locks with spindle, no lock included. IML dummy trim screws are horizontal unless specified vertical (no charge).
2 1/2” or 2 3/4” backset standard.Custom backsets available. Call for options and pricing.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.Note: Thru-bolt only.
Specify manufacturer & function of interior mortise lock.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.Note: Thru-bolt only.
2 1/
4"
CS-RP225-8IML – Complete passage set with
interior mortise lock and spindle. OR TS-RP225-8IML – Trim set only. No lock.
TS-RP225-8IML-FD – Trim set only. – Full dummy.
TS-RP225-8IML-HD – Trim set only. – Half dummy.
2 1/
4"
2 1/
4"
2 1/4" 2 1/4" 2 1/4" 2 1/4" 2 1/4"
CS-RP225-8IML Passage set. Lever/knob x lever/knob interior mortise lock set. Sectional. RP-225 (ext) RP-225 (int)
TS-RP225-8IML-FD Full dummy set. Lever/knob x lever/knob interior mortise lock set. Sectional. RP-225D (ext) RP-225D (int)
TS-RP225-8IML-HD Half dummy set. Lever/knob interior mortise lock set. Sectional. RP-225D
TS-RP225-8IML Passage set. Lever/knob x lever/knob interior mortise lock set. Sectional. RP-225 (ext) RP-225 (int)
TS-RP225-8IML-FD Full dummy set. Lever/knob x lever/knob interior mortise lock set. Sectional. RP-225D (ext) RP-225D (int)
TS-RP225-8IML-HD Half dummy set. Lever/knob interior mortise lock set. Sectional. RP-225D
Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m
PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.
14-14
Revised 02/08/16
Illustrations are for demonstration purposes only. Any knob, lever or ring pull can be combined with any style or size escutcheon plate.
RP225-8 BEVEL EDGE SECTIONAL INTERIOR MORTISE SETS
Complete sets with interior mortise lock and spindle. IML dummy trim screws are horizontal unless specified vertical (no charge).2 7/8” center-to-center.
Trim sets for interior mortise locks with spindle, no lock included. IML dummy trim screws are horizontal unless specified vertical (no charge). 2 7/8” center-to-center.
2 1/2” or 2 3/4” backset standard.Custom backsets available. Call for options and pricing.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.Note: Thru-bolt only.
Specify manufacturer & function of interior mortise lock.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.Note: Thru-bolt only.
1 3/4" 2"2
1/4"
CS-RP225-8xRP158IML-PR – Complete privacy set with
interior mortise lock and spindle. OR TS-RP225-8xRP158IML-PR – Trim set only. No lock.
CS-RP225-8xRP175IML-PR – Complete privacy set with
interior mortise lock and spindle. OR TS-RP225-8xRP175IML-PR – Trim set only. No lock.
CS-RP225-8xRP200IML-PR – Complete privacy set with
interior mortise lock and spindle. OR TS-RP225-8xRP200IML-PR – Trim set only. No lock.
CS-RP225-8xRP225IML-PR – Complete privacy set with
interior mortise lock and spindle OR
TS-RP225-8xRP225IML-PR – Trim set only. No lock.
2 1/
4"
2 1/
4"
2 1/
4"2 7/
8"
1 5/8"1 5/8" 1 3/4" 2" 2 1/4" 2 1/4"
2 7/
8"
2 7/
8"
2 7/
8"
11/1
6"
13/1
6"
7/8"
9/16
"
CS-RP225-8xRP158IML-PR Privacy set. Lever/knob x lever/knob interior mortise lock set. Sectional. RP-225 w/RP-157ERC (ext) RP-225 w/RP-158TPC (int)
CS-RP225-8xRP175IML-PR Privacy set. Lever/knob x lever/knob interior mortise lock set. Sectional. RP-225 w/RP-174ERC (ext) RP-225 w/RP-175TPC (int)
CS-RP225-8xRP200IML-PR Privacy set. Lever/knob x lever/knob interior mortise lock set. Sectional. RP-225 w/RP-199ERC (ext) RP-225 w/RP-200TPC (int)
CS-RP225-8xRP225IML-PR Privacy set. Lever/knob x lever/knob interior mortise lock set. Sectional. RP-225 w/RP-440ERC (ext) RP-225 w/RP-441TPC (int)
TS-RP225-8xRP158IML-PR Privacy set. Lever/knob x lever/knob interior mortise lock set. Sectional. RP-225 w/RP-157ERC (ext) RP-225 w/RP-158TPC (int)
TS-RP225-8xRP175IML-PR Privacy set. Lever/knob x lever/knob interior mortise lock set. Sectional. RP-225 w/RP-174ERC (ext) RP-225 w/RP-175TPC (int)
TS-RP225-8xRP200IML-PR Privacy set. Lever/knob x lever/knob interior mortise lock set. Sectional. RP-225 w/RP-199ERC (ext) RP-225 w/RP-200TPC (int)
TS-RP225-8xRP225IML-PR Privacy set. Lever/knob x lever/knob interior mortise lock set. Sectional. RP-225 w/RP-440ERC (ext) RP-225 w/RP-441TPC (int)
Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m
PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.
14-15
Revised 02/08/16
Illustrations are for demonstration purposes only. Any knob, lever or ring pull can be combined with any style or size escutcheon plate.
F225-8 BEVEL EDGE SECTIONAL INTERIOR MORTISE SETS
Complete sets with interior mortise lock and spindle. IML dummy trim screws are horizontal unless specified vertical (no charge).
Trim sets for interior mortise locks with spindle, no lock included. IML dummy trim screws are horizontal unless specified vertical (no charge).
2 1/2” or 2 3/4” backset standard.Custom backsets available. Call for options and pricing.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.Note: Thru-bolt only.
Specify manufacturer & function of interior mortise lock.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.Note: Thru-bolt only.
CS-F225-8IML – Complete passage set with
interior mortise lock and spindle. OR TS-F225-8IML – Trim set only. No lock.
2 1/
4"
2 1/4"
2 1/
4"
2 1/4"2 1/4"
2 1/
4"
2 1/4" 2 1/4"
TS-F225-8IML-FD – Trim set only. – Full dummy.
TS-F225-8IML-HD – Trim set only. – Half dummy.
CS-F225-8IML Passage set. Lever/knob x lever/knob interior mortise lock set. Sectional. P-225 (ext) P-225 (int)
TS-F225-8IML-FD Full dummy set. Lever/knob x lever/knob interior mortise lock set. Sectional. P-225D (ext) P-225D (int)
TS-F225-8IML-HD Half dummy set. Lever/knob interior mortise lock set. Sectional. P-225D
TS-F225-8IML Passage set. Lever/knob x lever/knob interior mortise lock set. Sectional. P-225 (ext) P-225 (int)
TS-F225-8IML-FD Full dummy set. Lever/knob x lever/knob interior mortise lock set. Sectional. P-225D (ext) P-225D (int)
TS-F225-8IML-HD Half dummy set. Lever/knob interior mortise lock set. Sectional. P-225D
Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m
PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.
14-16
Revised 02/08/16
Illustrations are for demonstration purposes only. Any knob, lever or ring pull can be combined with any style or size escutcheon plate.
F225-8 BEVEL EDGE SECTIONAL INTERIOR MORTISE SETS
Complete sets with interior mortise lock and spindle. IML dummy trim screws are horizontal unless specified vertical (no charge).2 7/8” center-to-center.
Trim sets for interior mortise locks with spindle, no lock included. IML dummy trim screws are horizontal unless specified vertical (no charge). 2 7/8” center-to-center.
CS-F225-8x158IML-PR – Complete privacy set with
interior mortise lock and spindle.. OR TS-F225-8x158IML-PR – Trim set only. No lock.
CS-F225-8x175IML-PR – Complete privacy set with
interior mortise lock and spindle. OR TS-F225-8x175IML-PR – Trim set only. No lock.
CS-F225-8x200IML-PR – Complete privacy set with
interior mortise lock and spindle. OR TS-F225-8x200IML-PR – Trim set only. No lock.
CS-F225-8x225IML-PR – Complete privacy set with
interior mortise lock and spindle. OR
TS-F225-8x225IML-PR – Trim set only. No lock.
2 1/
4"
1 5/8"
2 1/4"
2 7/
8" 2 1/
4"
2 1/4"
2 1/
4"
2 1/4"2 1/4"2 1/4"
1 5/8"
2 1/
4"
1 3/4" 2"
2 1/4" 2 1/4" 2 1/4" 2 1/4"
2 7/
8"
2 7/
8"
2 7/
8"
1 3/4" 2" 2 1/4"
11/1
6"
13/1
6"
7/8"
9/16
"
2 1/2” or 2 3/4” backset standard.Custom backsets available. Call for options and pricing.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.Note: Thru-bolt only.
Specify manufacturer & function of interior mortise lock.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.Note: Thru-bolt only.
CS-F225-8x158IML-PR Privacy set. Lever/knob x lever/knob interior mortise lock set. Sectional. P-225 w/157ERC (ext) P-225 w/158TPC (int)
CS-F225-8x175IML-PR Privacy set. Lever/knob x lever/knob interior mortise lock set. Sectional. P-225 w/174ERC (ext) P-225 w/175TPC (int)
CS-F225-8x200IML-PR Privacy set. Lever/knob x lever/knob interior mortise lock set. Sectional. P-225 w/199ERC (ext) P-225 w/200TPC (int)
CS-F225-8x225IML-PR Privacy set. Lever/knob x lever/knob interior mortise lock set. Sectional. P-225 w/442ERC (ext) P-225 w/443TPC (int)
TS-F225-8x158IML-PR Privacy set. Lever/knob x lever/knob interior mortise lock set. Sectional. P-225 w/157ERC (ext) P-225 w/158TPC (int)
TS-F225-8x175IML-PR Privacy set. Lever/knob x lever/knob interior mortise lock set. Sectional. P-225 w/174ERC (ext) P-225 w/175TPC (int)
TS-F225-8x200IML-PR Privacy set. Lever/knob x lever/knob interior mortise lock set. Sectional. P-225 w/199ERC (ext) P-225 w/200TPC (int)
TS-F225-8x225IML-PR Privacy set. Lever/knob x lever/knob interior mortise lock set. Sectional. P-225 w/442ERC (ext) P-225 w/442TPC (int)
Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m
PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.
14-17
Revised 02/08/16
Illustrations are for demonstration purposes only. Any knob, lever or ring pull can be combined with any style or size escutcheon plate.
F-RP225-8 BEVEL EDGE SECTIONAL INTERIOR MORTISE SETS
Complete sets with interior mortise lock and spindle. IML dummy trim screws are horizontal unless specified vertical (no charge).
Trim sets for interior mortise locks with spindle, no lock included. IML dummy trim screws are horizontal unless specified vertical (no charge).
2 1/
4"
CS-F-RP225-8IML – Complete passage set with
interior mortise lock and spindle. OR TS-F-RP225-8IML – Trim set only. No lock.
TS-F-RP225-8IML-FD – Trim set only. – Full dummy.
TS-F-RP225-8IML-HD – Trim set only. – Half dummy.
2 1/
4"
2 1/
4"
2 1/4" 2 1/4" 2 1/4" 2 1/4" 2 1/4"
2 1/2” or 2 3/4” backset standard.Custom backsets available. Call for options and pricing.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.Note: Thru-bolt only.
Specify manufacturer & function of interior mortise lock.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.Note: Thru-bolt only.
CS-F-RP225-8IML Passage set. Lever/knob x lever/knob interior mortise lock set. Sectional. RP-225 (ext) RP-225 (int)
TS-F-RP225-8IML-FD Full dummy set. Lever/knob x lever/knob interior mortise lock set. Sectional. RP-225D (ext) RP-225D (int)
TS-F-RP225-8IML-HD Half dummy set. Lever/knob interior mortise lock set. Sectional. RP-225D
TS-F-RP225-8IML Passage set. Lever/knob x lever/knob interior mortise lock set. Sectional. RP-225 (ext) RP-225 (int)
TS-F-RP225-8IML-FD Full dummy set. Lever/knob x lever/knob interior mortise lock set. Sectional. RP-225D (ext) RP-225D (int)
TS-F-RP225-8IML-HD Half dummy set. Lever/knob interior mortise lock set. Sectional. RP-225D
Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m
PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.
14-18
Revised 02/08/16
Illustrations are for demonstration purposes only. Any knob, lever or ring pull can be combined with any style or size escutcheon plate.
F-RP225-8 BEVEL EDGE SECTIONAL INTERIOR MORTISE SETS
Complete sets with interior mortise lock and spindle. IML dummy trim screws are horizontal unless specified vertical (no charge).2 7/8” center-to-center.
Trim sets for interior mortise locks with spindle, no lock included. IML dummy trim screws are horizontal unless specified vertical (no charge). 2 7/8” center-to-center.
1 5/8"2"
CS-F-RP225-8xRP158IML-PR – Complete privacy set with
interior mortise lock and spindle. OR TS-F-RP225-8xRP158IML-PR – Trim set only. No lock.
CS-F-RP225-8xRP175IML-PR – Complete privacy set with
interior mortise lock and spindle. OR TS-F-RP225-8xRP175IML-PR – Trim set only. No lock.
CS-F-RP225-8xRP200IML-PR – Complete privacy set with
interior mortise lock and spindle. OR TS-F-RP225-8xRP200IML-PR – Trim set only. No lock.
CS-F-RP225-8xRP225IML-PR – Complete privacy set with
interior mortise lock and spindle. OR
TS-F-RP225-8xRP225IML-PR – Trim set only. No lock.
2 1/
4"
2 1/
4"
2 7/
8"
1 5/8"
2 1/
4"
2 7/
8"
2 7/
8"
2 7/
8"
1 3/4" 1 3/4"2"
2 1/4" 2 1/4"
2 1/
4"
11/1
6"
13/1
6"
7/8"
9/16
"
2 1/4" 2 1/4" 2 1/4" 2 1/4" 2 1/4" 2 1/4" 2 1/4" 2 1/4"
2 1/2” or 2 3/4” backset standard.Custom backsets available. Call for options and pricing.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.Note: Thru-bolt only.
Specify manufacturer & function of interior mortise lock.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.Note: Thru-bolt only.
CS-F-RP225-8xRP158IML-PR Privacy set. Lever/knob x lever/knob interior mortise lock set. Sectional. RP-225 w/RP-157ERC (ext) RP-225 w/RP-158TPC (int)
CS-F-RP225-8xRP175IML-PR Privacy set. Lever/knob x lever/knob interior mortise lock set. Sectional. RP-225 w/RP-174ERC (ext) RP-225 w/RP-175TPC (int)
CS-F-RP225-8xRP200IML-PR Privacy set. Lever/knob x lever/knob interior mortise lock set. Sectional. RP-225 w/RP-199ERC (ext) RP-225 w/RP-200TPC (int)
CS-F-RP225-8xRP225IML-PR Privacy set. Lever/knob x lever/knob interior mortise lock set. Sectional. RP-225 w/RP-440ERC (ext) RP-225 w/RP-441TPC (int)
TS-F-RP225-8xRP158IML-PR Privacy set. Lever/knob x lever/knob interior mortise lock set. Sectional. RP-225 w/RP-157ERC (ext) RP-225 w/RP-158TPC (int)
TS-F-RP225-8xRP175IML-PR Privacy set. Lever/knob x lever/knob interior mortise lock set. Sectional. RP-225 w/RP-174ERC (ext) RP-225 w/RP-175TPC (int)
TS-F-RP225-8xRP200IML-PR Privacy set. Lever/knob x lever/knob interior mortise lock set. Sectional. RP-225 w/RP-199ERC (ext) RP-225 w/RP-200TPC (int)
TS-F-RP225-8xRP225IML-PR Privacy set. Lever/knob x lever/knob interior mortise lock set. Sectional. RP-225 w/RP-440ERC (ext) RP-225 w/RP-441TPC (int)
Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m
PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.
14-19
Revised 02/08/16
Illustrations are for demonstration purposes only. Any knob, lever or ring pull can be combined with any style or size escutcheon plate.
402-8 BEVEL EDGE SECTIONAL INTERIOR MORTISE SETS
Complete sets with interior mortise lock and spindle. IML dummy trim screws are horizontal unless specified vertical (no charge).
Trim sets for interior mortise locks with spindle, no lock included. IML dummy trim screws are horizontal unless specified vertical (no charge).
2 1/2"
2 1/
2"CS-402-8IML – Complete passage set with
interior mortise lock and spindle. OR TS-402-8IML – Trim set only. No lock.
TS-402-8IML-FD – Trim set only. – Full dummy.
TS-402-8IML-HD – Trim set only. – Half dummy.
2 1/2"
2 1/
2"
2 1/2"
2 1/
2"
2 1/2" 2 1/2"
2 1/2” or 2 3/4” backset standard.Custom backsets available. Call for options and pricing.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.Note: Thru-bolt only.
Specify manufacturer & function of interior mortise lock.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.Note: Thru-bolt only.
CS-402-8IML Passage set. Lever/knob x lever/knob interior mortise lock set. Sectional. P-402 (ext) P-402 (int)
TS-402-8IML-FD Full dummy set. Lever/knob x lever/knob interior mortise lock set. Sectional. P-402D (ext) P-402D (int)
TS-402-8IML-HD Half dummy set. Lever/knob interior mortise lock set. Sectional. P-402D
TS-402-8IML Passage set. Lever/knob x lever/knob interior mortise lock set. Sectional. P-402 (ext) P-402 (int)
TS-402-8IML-FD Full dummy set. Lever/knob x lever/knob interior mortise lock set. Sectional. P-402D (ext) P-402D (int)
TS-402-8IML-HD Half dummy set. Lever/knob interior mortise lock set. Sectional. P-402D
Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m
PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.
14-20
Revised 02/08/16
Illustrations are for demonstration purposes only. Any knob, lever or ring pull can be combined with any style or size escutcheon plate.
402-8 BEVEL EDGE SECTIONAL INTERIOR MORTISE SETS
Complete sets with interior mortise lock and spindle. IML dummy trim screws are horizontal unless specified vertical (no charge).2 7/8” center-to-center.
Trim sets for interior mortise locks with spindle, no lock included. IML dummy trim screws are horizontal unless specified vertical (no charge). 2 7/8” center-to-center.
1 3/4"2
1/2"
CS-402-8x158IML-PR – Complete privacy set with
interior mortise lock and spindle. OR TS-402-8x158IML-PR – Trim set only. No lock.
CS-402-8x175IML-PR – Complete privacy set with
interior mortise lock and spindle. OR TS-402-8x175IML-PR – Trim set only. No lock.
CS-402-8x200IML-PR – Complete privacy set with
interior mortise lock and spindle. OR TS-402-8x200IML-PR – Trim set only. No lock.
CS-402-8x225IML-PR – Complete privacy set with
interior mortise lock and spindle. OR
TS-402-8x225IML-PR – Trim set only. Nso lock.
2 7/
8"
1 5/8"
2 1/
2"
2 1/
2"
2 1/
2"
2"
2 7/
8"
2 7/
8"
2 7/
8"
1 5/8" 1 3/4" 2" 2 1/4" 2 1/4"
11/1
6"
3/4"
7/16
"
9/16
"
2 1/2” or 2 3/4” backset standard.Custom backsets available. Call for options and pricing.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.Note: Thru-bolt only.
Specify manufacturer & function of interior mortise lock.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.Note: Thru-bolt only.
CS-402-8x158IML-PR Privacy set. Lever/knob x lever/knob interior mortise lock set. Sectional. P-402 w/157ERC (ext) P-402 w/158TPC (int)
CS-402-8x175IML-PR Privacy set. Lever/knob x lever/knob interior mortise lock set. Sectional. P-402 w/174ERC (ext) P-402 w/175TPC (int)
CS-402-8x200IML-PR Privacy set. Lever/knob x lever/knob interior mortise lock set. Sectional. P-402 w/199ERC (ext) P-402 w/200TPC (int)
CS-402-8x225IML-PR Privacy set. Lever/knob x lever/knob interior mortise lock set. Sectional. P-402 w/442ERC (ext) P-402 w/443TPC (int)
TS-402-8x158IML-PR Privacy set. Lever/knob x lever/knob interior mortise lock set. Sectional. P-402 w/157ERC (ext) P-402 w/158TPC (int)
TS-402-8x175IML-PR Privacy set. Lever/knob x lever/knob interior mortise lock set. Sectional. P-402 w/174ERC (ext) P-402 w/175TPC (int).
TS-402-8x200IML-PR Privacy set. Lever/knob x lever/knob interior mortise lock set. Sectional. P-402 w/199ERC (ext) P-402 w/200TPC (int)
TS-402-8x225IML-PR Privacy set. Lever/knob x lever/knob interior mortise lock set. Sectional. P-402 w/442ERC (ext) P-402 w/443TPC (int)
Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m
PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.
14-21
Revised 02/08/16
Illustrations are for demonstration purposes only. Any knob, lever or ring pull can be combined with any style or size escutcheon plate.
F402-8 BEVEL EDGE SECTIONAL INTERIOR MORTISE SETS
Complete sets with interior mortise lock and spindle. IML dummy trim screws are horizontal unless specified vertical (no charge).
Trim sets for interior mortise locks with spindle, no lock included. IML dummy trim screws are horizontal unless specified vertical (no charge).
2 1/2"
2 1/
2"
CS-F402-8IML – Complete passage set with
interior mortise lock and spindle. OR TS-F402-8IML – Trim set only. No lock.
TS-F402-8IML-FD – Trim set only. – Full dummy.
TS-F402-8IML-HD – Trim set only. – Half dummy.
2 1/2"
2 1/
2"
2 1/2"
2 1/
2"
2 1/2" 2 1/2"
2 1/2” or 2 3/4” backset standard.Custom backsets available. Call for options and pricing.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.Note: Thru-bolt only.
Specify manufacturer & function of interior mortise lock.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.Note: Thru-bolt only.
CS-F402-8IML Passage set. Lever/knob x lever/knob interior mortise lock set. Sectional. P-402 (ext) P-402 (int)
TS-F402-8IML-FD Full dummy set. Lever/knob x lever/knob interior mortise lock set. Sectional. P-402D (ext) P-402D (int)
TS-F402-8IML-HD Half dummy set. Lever/knob interior mortise lock set. Sectional. P-402D
TS-F402-8IML Passage set. Lever/knob x lever/knob interior mortise lock set. Sectional. P-402 (ext) P-402 (int)
TS-F402-8IML-FD Full dummy set. Lever/knob x lever/knob interior mortise lock set. Sectional. P-402D (ext) P-402D (int)
TS-F402-8IML-HD Half dummy set. Lever/knob interior mortise lock set. Sectional. P-402D
Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m
PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.
14-22
Revised 02/08/16
Illustrations are for demonstration purposes only. Any knob, lever or ring pull can be combined with any style or size escutcheon plate.
F402-8 BEVEL EDGE SECTIONAL INTERIOR MORTISE SETS
Complete sets with interior mortise lock and spindle. IML dummy trim screws are horizontal unless specified vertical (no charge).2 7/8” center-to-center.
Trim sets for interior mortise locks with spindle, no lock included. IML dummy trim screws are horizontal unless specified vertical (no charge). 2 7/8” center-to-center.
2"
CS-F402-8/158IML-PR – Complete privacy set with
interior mortise lock and spindle. OR TS-F402-8/158IML-PR – Trim set only. No lock.
CS-F402-8/175IML-PR – Complete privacy set with
interior mortise lock and spindle. OR TS-F402-8/175IML-PR – Trim set only. No lock.
CS-F402-8/200IML-PR – Complete privacy set with
interior mortise lock and spindle. OR TS-F402-8/200IML-PR – Trim set only. No lock.
CS-F402-8/225IML-PR – Complete privacy set with
interior mortise lock and spindle. OR
TS-F402-8/225IML-PR – Trim set only. No lock.
2 1/4"1 3/4"
2 1/
2"
2 1/
2"
1 5/8"
2 7/
8"
1 5/8"
2 1/2"
2 1/
2"
2 7/
8"
2 7/
8"
2 7/
8"
1 3/4" 2"2 1/4"
9/16
"
11/1
6"
3/4"
7/16
"
2 1/2" 2 1/2" 2 1/2" 2 1/2" 2 1/2" 2 1/2" 2 1/2"
2 1/2” or 2 3/4” backset standard.Custom backsets available. Call for options and pricing.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.Note: Thru-bolt only.
Specify manufacturer & function of interior mortise lock.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.Note: Thru-bolt only.
CS-F402-8x158IML-PR Privacy set. Lever/knob x lever/knob interior mortise lock set. Sectional. P-402 w/157ERC (ext) P-402 w/158TPC (int)
CS-F402-8x175IML-PR Privacy set. Lever/knob x lever/knob interior mortise lock set. Sectional. P-402 w/174ERC (ext) P-402 w/175TPC (int)
CS-F402-8x200IML-PR Privacy set. Lever/knob x lever/knob interior mortise lock set. Sectional. P-402 w/199ERC (ext) P-402 w/200TPC (int)
CS-F402-8x225IML-PR Privacy set. Lever/knob x lever/knob interior mortise lock set. Sectional. P-402 w/442ERC (ext) P-402 w/443TPC (int)
TS-F402-8x158IML-PR Privacy set. Lever/knob x lever/knob interior mortise lock set. Sectional. P-402 w/157ERC (ext) P-402 w/158TPC (int)
TS-F402-8x175IML-PR Privacy set. Lever/knob x lever/knob interior mortise lock set. Sectional. P-402 w/174ERC (ext) P-402 w/175TPC (int)
TS-F402-8x200IML-PR Privacy set. Lever/knob x lever/knob interior mortise lock set. Sectional. P-402 w/199ERC (ext) P-402 w/200TPC (int)
TS-F402-8x225IML-PR Privacy set. Lever/knob x lever/knob interior mortise lock set. Sectional. P-402 w/442ERC (ext) P-402 w/443TPC (int)
Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m
PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.
14-23
Revised 02/08/16
Illustrations are for demonstration purposes only. Any knob, lever or ring pull can be combined with any style or size escutcheon plate.
RP402-8 BEVEL EDGE SECTIONAL INTERIOR MORTISE SETS
Complete sets with interior mortise lock and spindle. IML dummy trim screws are horizontal unless specified vertical (no charge).
Trim sets for interior mortise locks with spindle, no lock included. IML dummy trim screws are horizontal unless specified vertical (no charge).
2 1/2"
2 1/
2"CS-RP402-8IML – Complete passage set with
interior mortise lock and spindle. OR TS-RP402-8IML – Trim set only. No lock.
TS-RP402-8IML-FD – Trim set only. – Full dummy.
TS-RP402-8IML-HD – Trim set only. – Half dummy.
2 1/2" 2 1/2"
2 1/
2"
2 1/2" 2 1/2"
2 1/
2"
2 1/2” or 2 3/4” backset standard.Custom backsets available. Call for options and pricing.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.Note: Thru-bolt only.
Specify manufacturer & function of interior mortise lock.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.Note: Thru-bolt only.
CS-RP402-8IML Passage set. Lever/knob x lever/knob interior mortise lock set. Sectional. RP-402 (ext) RP-402 (int)
TS-RP402-8IML-FD Full dummy set. Lever/knob x lever/knob interior mortise lock set. Sectional. RP-402D (ext) RP-402D (int)
TS-RP402-8IML-HD Half dummy set. Lever/knob interior mortise lock set. Sectional. RP-402D
TS-RP402-8IML Passage set. Lever/knob x lever/knob interior mortise lock set. Sectional. RP-402 (ext) RP-402 (int)
TS-RP402-8IML-FD Full dummy set. Lever/knob x lever/knob interior mortise lock set. Sectional. RP-402D (ext) RP-402D (int)
TS-RP402-8IML-HD Half dummy set. Lever/knob interior mortise lock set. Sectional. RP-402D
Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m
PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.
14-24
Revised 02/08/16
Illustrations are for demonstration purposes only. Any knob, lever or ring pull can be combined with any style or size escutcheon plate.
RP402-8 BEVEL EDGE SECTIONAL INTERIOR MORTISE SETS
Complete sets with interior mortise lock and spindle. IML dummy trim screws are horizontal unless specified vertical (no charge).2 7/8” center-to-center.
Trim sets for interior mortise locks with spindle, no lock included. IML dummy trim screws are horizontal unless specified vertical (no charge). 2 7/8” center-to-center.
1 3/4" 2"
CS-RP402-8xRP158IML-PR – Complete privacy set with
interior mortise lock and spindle. OR TS-RP402-8xRP158IML-PR – Trim set only. No lock.
CS-RP402-8xRP175IML-PR – Complete privacy set with
interior mortise lock and spindle. OR TS-RP402-8xRP175IML-PR – Trim set only. No lock.
CS-RP402-8xRP200IML-PR – Complete privacy set with
interior mortise lock and spindle. OR TS-RP402-8xRP200IML-PR – Trim set only. No lock.
CS-RP402-8xRP225IML-PR – Complete privacy set with
interior mortise lock and spindle. OR
TS-RP402-8xRP225IML-PR – Trim set only. No lock.
2 1/
2"
2 1/
2"
2 1/
2"
1 5/8"
2 7/
8"
2 1/
2" 2 7/
8"
2 7/
8"
2 7/
8"
1 5/8" 1 3/4" 2" 2 1/4" 2 1/4"
9/16
"
11/1
6"
3/4"
7/16
"
2 1/2” or 2 3/4” backset standard.Custom backsets available. Call for options and pricing.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.Note: Thru-bolt only.
Specify manufacturer & function of interior mortise lock.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.Note: Thru-bolt only.
CS-RP402-8xRP158IML-PR Privacy set. Lever/knob x lever/knob interior mortise lock set. Sectional. RP-402 w/RP-157ERC (ext) RP-402 w/RP-158TPC (int)
CS-RP402-8xRP175IML-PR Privacy set. Lever/knob x lever/knob interior mortise lock set. Sectional. RP-402 w/RP-174ERC (ext) RP-402 w/RP-175TPC (int)
CS-RP402-8xRP200IML-PR Privacy set. Lever/knob x lever/knob interior mortise lock set. Sectional. RP-402 w/RP-200ERC (ext) RP-402 w/RP-200TPC (int)
CS-RP402-8xRP225IML-PR Privacy set. Lever/knob x lever/knob interior mortise lock set. Sectional. RP-402 w/RP-440 (ext) RP-402 w/RP-441TPC (int)
TS-RP402-8xRP158IML-PR Privacy set. Lever/knob x lever/knob interior mortise lock set. Sectional. RP-402 w/RP-157ERC (ext) RP-402 w/RP-158TPC (int)
TS-RP402-8xRP175IML-PR Privacy set. Lever/knob x lever/knob interior mortise lock set. Sectional. RP-402 w/RP-174ERC (ext) RP-402 w/RP-175TPC (int)
TS-RP402-8xRP200IML-PR Privacy set. Lever/knob x lever/knob interior mortise lock set. Sectional. RP-402 w/RP-200ERC (ext) RP-402 w/RP-200TPC (int)
TS-RP402-8xRP225IML-PR Privacy set. Lever/knob x lever/knob interior mortise lock set. Sectional. RP-402 w/RP-440 (ext) RP-402 w/RP-441TPC (int)
Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m
PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.
14-25
Revised 02/08/16
Illustrations are for demonstration purposes only. Any knob, lever or ring pull can be combined with any style or size escutcheon plate.
F-RP402-8 BEVEL EDGE SECTIONAL INTERIOR MORTISE SETS
Complete sets with interior mortise lock and spindle. IML dummy trim screws are horizontal unless specified vertical (no charge).
Trim sets for interior mortise locks with spindle, no lock included. IML dummy trim screws are horizontal unless specified vertical (no charge).
2 1/2"
2 1/
2"
CS-F-RP402-8IML – Complete passage set with
interior mortise lock and spindle. OR TS-F-RP402-8IML – Trim set only. No lock.
TS-F-RP402-8IML-FD – Trim set only. – Full dummy.
TS-F-RP402-8IML-HD – Trim set only. – Half dummy.
2 1/2" 2 1/2"
2 1/
2"
2 1/2" 2 1/2"
2 1/
2"
2 1/2” or 2 3/4” backset standard.Custom backsets available. Call for options and pricing.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.Note: Thru-bolt only.
Specify manufacturer & function of interior mortise lock.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.Note: Thru-bolt only.
CS-F-RP402-8IML Passage set. Lever/knob x lever/knob interior mortise lock set. Sectional. RP-402 (ext) RP-402 (int)
TS-F-RP402-8IML-FD Full dummy set. Lever/knob x lever/knob interior mortise lock set. Sectional. RP-402D (ext) RP-402D (int)
TS-F-RP402-8IML-HD Half dummy set. Lever/knob interior mortise lock set. Sectional. RP-402D
TS-F-RP402-8IML Passage set. Lever/knob x lever/knob interior mortise lock set. Sectional. RP-402 (ext) RP-402 (int)
TS-F-RP402-8IML-FD Full dummy set. Lever/knob x lever/knob interior mortise lock set. Sectional. RP-402D (ext) RP-402D (int)
TS-F-RP402-8IML-HD Half dummy set. Lever/knob interior mortise lock set. Sectional. RP-402D
Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m
PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.
14-26
Revised 02/08/16
Illustrations are for demonstration purposes only. Any knob, lever or ring pull can be combined with any style or size escutcheon plate.
F-RP402-8 BEVEL EDGE SECTIONAL INTERIOR MORTISE SETS
Complete sets with interior mortise lock and spindle. IML dummy trim screws are horizontal unless specified vertical (no charge).2 7/8” center-to-center.
Trim sets for interior mortise locks with spindle, no lock included. IML dummy trim screws are horizontal unless specified vertical (no charge). 2 7/8” center-to-center.
1 5/8" 1 3/4"
CS-F-RP402-8xRP158IML-PR – Complete privacy set with
interior mortise lock and spindle. OR TS-F-RP402-8xRP158IML-PR – Trim set only. No lock.
CS-F-RP402-8xRP175IML-PR-RC – Complete privacy set with
interior mortise lock and spindle. OR TS-F-RP402-8xRP175IML-PR-RC – Trim set only. No lock.
2 7/
8"2 1/
2"
2 1/
2"
2"
CS-F-RP402-8xRP200IML-PR – Complete privacy set with
interior mortise lock and spindle. OR TS-F-RP402-8xRP200IML-PR – Trim set only. No lock.
2 1/
2"
2 1/4"
CS-F-RP402-8xRP225IML-PR – Complete privacy set with
interior mortise lock and spindle. OR TS-F-RP402-8xRP225IML-PR – Trim set only. No lock.
2 1/
2"
1 5/8"
2 7/
8"
2 7/
8"
2 7/
8"
1 3/4" 2" 2 1/4"
9/16
"
11/1
6"
3/4"
7/16
"
2 1/2" 2 1/2" 2 1/2" 2 1/2" 2 1/2" 2 1/2" 2 1/2" 2 1/2"
2 1/2” or 2 3/4” backset standard.Custom backsets available. Call for options and pricing.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.Note: Thru-bolt only.
Specify manufacturer & function of interior mortise lock.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.Note: Thru-bolt only.
CS-F-RP402-8xRP158IML-PR Privacy set. Lever/knob x lever/knob interior mortise lock set. Sectional. RP-402 w/RP-157ERC (ext) RP-402 w/RP-158TPC (int)
CS-F-RP402-8xRP175IML-PR Privacy set. Lever/knob x lever/knob interior mortise lock set. Sectional. RP-402 w/RP174ERC (ext) RP-402 w/RP-175TPC (int)
CS-F-RP402-8xRP200IML-PR Privacy set. Lever/knob x lever/knob interior mortise lock set. Sectional. RP-402 w/RP-199ERC (ext) RP-402 w/RP-200TPC (int)
CS-F-RP402-8xRP225IML-PR Privacy set. Lever/knob x lever/knob interior mortise lock set. Sectional. RP-402 w/RP-440ERC (ext) RP-402 w/RP-441TPC (int)
TS-F-RP402-8xRP158IML-PR Privacy set. Lever/knob x lever/knob interior mortise lock set. Sectional. RP-402 w/RP-157ERC (ext) RP-402 w/RP-158TPC (int)
TS-F-RP402-8xRP175IML-PR Privacy set. Lever/knob x lever/knob interior mortise lock set. Sectional. RP-402 w/RP174ERC (ext) RP-402 w/RP-175TPC (int)
TS-F-RP402-8xRP200IML-PR Privacy set. Lever/knob x lever/knob interior mortise lock set. Sectional. RP-402 w/RP-199ERC (ext) RP-402 w/RP-200TPC (int)
TS-F-RP402-8xRP225IML-PR Privacy set. Lever/knob x lever/knob interior mortise lock set. Sectional. RP-402 w/RP-440ERC (ext) RP-402 w/RP-441TPC (int)
Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m
PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.
14-27
Revised 02/08/16
Illustrations are for demonstration purposes only. Any knob, lever or ring pull can be combined with any style or size escutcheon plate.
925 CONTEMPORARY SECTIONAL INTERIOR MORTISE SETS
Complete sets with interior mortise lock and spindle. IML dummy trim screws are horizontal unless specified vertical (no charge).2 1/4” center-to-center.
Trim sets for interior mortise locks with spindle, no lock included. IML dummy trim screws are horizontal unless specified vertical (no charge). 2 1/4” center-to-center.
2 1/2” or 2 3/4” backset standard.Custom backsets available. Call for options and pricing.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.Note: Thru-bolt only.
CS-925IML – Complete passage set with interior
mortise lock and spindle. OR TS-925IML – Trim set only. No lock.
CS-925IML-PR – Complete privacy set with interior
mortise lock and spindle. OR TS-925IML-PR – Trim set only. No lock.
CS-925IML-PR-RC – Complete privacy set with interior
mortise lock and spindle. OR TS-925IML-PR-RC – Trim set only. No lock.
TS-925IML-HD – Trim set only. – Half dummy.
1 5/8"1 5/8"
2 1/
4"
1 5/8"
2 1/
4"
2 1/4"
2 1/
4" 2 1/
4"
2 1/
4"
2 1/4"2 1/4"
TS-925IML-FD – Trim set only. – Full dummy.
2 1/
4"
2 1/4"2 1/4"
2 1/
4"
1/4"
3/4"
1"
Specify manufacturer & function of interior mortise lock.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.Note: Thru-bolt only.
CS-925IML Passage set. Lever/knob x lever/knob interior mortise lock set. Sectional. P-925 (ext) P-925 (int)
CS-925IML-PR Privacy set. Lever/knob x lever/knob interior mortise lock set. Sectional. P-925 w/9157ERC (ext) P-925 w/9158TPC (int)
CS-925IML-PR-RC Privacy set. Lever/knob x lever/knob interior mortise lock set. Sectional. P-925 w/RC-9 (ext) P-925 w/9158TPC (int)
TS-925IML-FD Full dummy set. Lever/knob x lever/knob interior mortise lock set. Sectional. P-925D (ext) P-925D (int)
TS-925IML-HD Half dummy set. Lever/knob interior mortise lock set. Sectional. P-925D
TS-925IML Passage set. Lever/knob x lever/knob interior mortise lock set. Sectional. P-925 (ext) P-925 (int)
TS-925IML-PR Privacy set. Lever/knob x lever/knob interior mortise lock set. Sectional. P-925 w/9157ERC (ext) P-925 w/9158TPC (int)
TS-925IML-PR-RC Privacy set. Lever/knob x lever/knob interior mortise lock set. Sectional. P-925 w/RC-9 (ext) P-925 w/9158TPC (int)
TS-925IML-FD Full dummy set. Lever/knob x lever/knob interior mortise lock set. Sectional. P-925D (ext) P-925D (int)
TS-925IML-HD Half dummy set. Lever/knob interior mortise lock set. Sectional. P-925D
Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m
PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.
14-28
Revised 02/08/16
Illustrations are for demonstration purposes only. Any knob, lever or ring pull can be combined with any style or size escutcheon plate.
RP925 CONTEMPORARY SECTIONAL INTERIOR MORTISE SETS
Complete sets with interior mortise lock and spindle. IML dummy trim screws are horizontal unless specified vertical (no charge).2 1/4” center-to-center.
Trim sets for interior mortise locks with spindle, no lock included. IML dummy trim screws are horizontal unless specified vertical (no charge). 2 1/4” center-to-center.
2 1/2” or 2 3/4” backset standard.Custom backsets available. Call for options and pricing.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.Note: Thru-bolt only.
CS-RP925IML – Complete passage set with interior
mortise lock and spindle. OR TS-RP925IML – Trim set only. No lock.
CS-RP925IML-PR – Complete privacy set with interior
mortise lock and spindle. OR TS-RP925IML-PR – Trim set only. No lock.
CS-RP925IML-PR-RC – Complete privacy set with interior
mortise lock and spindle. OR TS-RP925IML-PR-RC – Trim set only. No lock.
TS-RP925IML-FD – Trim set only. – Full dummy.
2 1/
4"
2 1/
4"
2 1/
4"
2 1/4"2 1/4"
1 5/8"
2 1/
4"
2 1/4"2 1/4"
TS-RP925IML-HD – Trim set only. – Half dummy.
2 1/
4"
2 1/4"
1 5/8"
2 1/
4"
1 5/8"
2 1/
4"
1/4"
3/4"
1"
Specify manufacturer & function of interior mortise lock.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.Note: Thru-bolt only.
CS-RP925IML Passage set. Lever/knob x lever/knob interior mortise lock set. Sectional. RP-925 (ext) RP-925 (int)
CS-RP925IML-PR Privacy set. Lever/knob x lever/knob interior mortise lock set. Sectional. RP-925 w/RP-9157ERC (ext) RP-925 w/RP-9158TPC (int)
CS-RP925IML-PR-RC Privacy set. Lever/knob x lever/knob interior mortise lock set. Sectional. RP-925 w/RC-9 (ext) RP-925w/RP-9158TPC (int)
TS-RP925IML-FD Full dummy set. Lever/knob x lever/knob interior mortise lock set. Sectional. RP-925D (ext) RP-925D (int)
TS-RP925IML-HD Half dummy set. Lever/knob interior mortise lock set. Sectional. RP-925D
TS-RP925IML Passage set. Lever/knob x lever/knob interior mortise lock set. Sectional. RP-925 (ext) RP-925 (int)
TS-RP925IML-PR Privacy set. Lever/knob x lever/knob interior mortise lock set. Sectional. RP-925 w/RP-9157ERC (ext) RP-925 w/RP-9158TPC (int)
TS-RP925IML-PR-RC Privacy set. Lever/knob x lever/knob interior mortise lock set. Sectional. RP-925 w/RC-9 (ext) RP-925 w/RP-9158TPC (int)
TS-RP925IML-FD Full dummy set. Lever/knob x lever/knob interior mortise lock set. Sectional. RP-925D (ext) RP-925D (int)
TS-RP925IML-HD Half dummy set. Lever/knob interior mortise lock set. Sectional. RP-925D
Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m
PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.
14-29
Revised 02/08/16
Illustrations are for demonstration purposes only. Any knob, lever or ring pull can be combined with any style or size escutcheon plate.
F925 CONTEMPORARY SECTIONAL INTERIOR MORTISE SETS
Complete sets with interior mortise lock and spindle. IML dummy trim screws are horizontal unless specified vertical (no charge).2 1/4” center-to-center.
Trim sets for interior mortise locks with spindle, no lock included. IML dummy trim screws are horizontal unless specified vertical (no charge). 2 1/4” center-to-center.
2 1/2” or 2 3/4” backset standard.Custom backsets available. Call for options and pricing.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.Note: Thru-bolt only.
CS-F925IML – Complete passage set with interior
mortise lock and spindle. OR TS-F925IML – Trim set only. No lock.
CS-F925IML-PR – Complete privacy set with interior
mortise lock and spindle. OR TS-F925IML-PR – Trim set only. No lock.
CS-F925IML-PR-RC – Complete privacy set with interior
mortise lock and spindle. OR TS-F925IML-PR-RC – Trim set only. No lock.
TS-F925IML-HD – Trim set only. – Half dummy.
1 5/8"1 5/8"
2 1/
4"
1 5/8"
2 1/
4"
2 1/4"
2 1/
4"
2 1/
4"2 1/
4"2 1/4"2 1/4"
TS-F925IML-FD – Trim set only. – Full dummy.
2 1/
4"
2 1/4"2 1/4"
2 1/
4"
1/4"
3/4"
1"
2 1/4"2 1/4" 2 1/4"2 1/4"
Specify manufacturer & function of interior mortise lock.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.Note: Thru-bolt only.
CS-F925IML Passage set. Lever/knob x lever/knob interior mortise lock set. Sectional. P-925 (ext) P-925 (int)
CS-F925IML-PR Privacy set. Lever/knob x lever/knob interior mortise lock set. Sectional. P-925 w/9157ERC (ext) P-925 w/9158TPC (int)
CS-F925IML-PR-RC Privacy set. Lever/knob x lever/knob interior mortise lock set. Sectional. P-925 w/RC-9 (ext) P-925 w/9158TPC (int)
TS-F925IML-FD Full dummy set. Lever/knob x lever/knob interior mortise lock set. Sectional. P-925D (ext) P-925D (int)
TS-F925IML-HD Half dummy set. Lever/knob interior mortise lock set. Sectional. P-925D
TS-F925IML Passage set. Lever/knob x lever/knob interior mortise lock set. Sectional. P-925 (ext) P-925 (int)
TS-F925IML-PR Privacy set. Lever/knob x lever/knob interior mortise lock set. Sectional. P-925 w/9157ERC (ext) P-925 w/9158TPC (int)
TS-F925IML-PR-RC Privacy set. Lever/knob x lever/knob interior mortise lock set. Sectional. P-925 w/RC-9 (ext) P-925 w/9158TPC (int)
TS-F925IML-FD Full dummy set. Lever/knob x lever/knob interior mortise lock set. Sectional. P-925D (ext) P-925D (int)
TS-F925IML-HD Half dummy set. Lever/knob interior mortise lock set. Sectional. P-925D
Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m
PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.
14-30
Revised 02/08/16
Illustrations are for demonstration purposes only. Any knob, lever or ring pull can be combined with any style or size escutcheon plate.
F-RP925 CONTEMPORARY SECTIONAL INTERIOR MORTISE SETS
Complete sets with interior mortise lock and spindle. IML dummy trim screws are horizontal unless specified vertical (no charge).2 1/4” center-to-center.
Trim sets for interior mortise locks with spindle, no lock included. IML dummy trim screws are horizontal unless specified vertical (no charge). 2 1/4” center-to-center.
2 1/2” or 2 3/4” backset standard.Custom backsets available. Call for options and pricing.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.Note: Thru-bolt only.
CS-F-RP925IML – Complete passage set with interior
mortise lock and spindle. OR TS-F-RP925IML – Trim set only. No lock.
CS-F-RP925IML-PR – Complete privacy set with interior
mortise lock and spindle. OR TS-F-RP925IML-PR – Trim set only. No lock.
CS-F-RP925IML-PR-RC – Complete privacy set with interior
mortise lock and spindle. OR TS-F-RP925IML-PR-RC – Trim set only. No lock.
TS-F-RP925IML-FD – Trim set only. – Full dummy.
2 1/
4"
2 1/
4"
2 1/
4"
2 1/4"2 1/4"
1 5/8"
2 1/
4"
2 1/4"2 1/4"
TS-F-RP925IML-HD – Trim set only. – Half dummy.
2 1/
4"
2 1/4"
1 5/8"
2 1/
4"
1 5/8"
2 1/
4"
2 1/4"2 1/4" 2 1/4"2 1/4"
1/4"
1"
3/4"
Specify manufacturer & function of interior mortise lock.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.Note: Thru-bolt only.
CS-F-RP925IML Passage set. Lever/knob x lever/knob interior mortise lock set. Sectional. RP-925 (ext) RP-925 (int)
CS-F-RP925IML-PR Privacy set. Lever/knob x lever/knob interior mortise lock set. Sectional. RP-925 w/RP-9157ERC (ext) RP-925 w/RP-9158TPC (int)
CS-F-RP925IML-PR-RC Privacy set. Lever/knob x lever/knob interior mortise lock set. Sectional. RP-925 w/RC-9 (ext) RP-925w/RP-9158TPC (int)
TS-F-RP925IML-FD Full dummy set. Lever/knob x lever/knob interior mortise lock set. Sectional. RP-925D (ext) RP-925D (int)
TS-F-RP925IML-HD Half dummy set. Lever/knob interior mortise lock set. Sectional. RP-925D
TS-F-RP925IML Passage set. Lever/knob x lever/knob interior mortise lock set. Sectional. RP-925 (ext) RP-925 (int)
TS-F-RP925IML-PR Privacy set. Lever/knob x lever/knob interior mortise lock set. Sectional. RP-925 w/RP-9157ERC (ext) RP-925 w/RP-9158TPC (int)
TS-F-RP925IML-PR-RC Privacy set. Lever/knob x lever/knob interior mortise lock set. Sectional. RP-925 w/RC-9 (ext) RP-925 w/RP-9158TPC (int)
TS-F-RP925IML-FD Full dummy set. Lever/knob x lever/knob interior mortise lock set. Sectional. RP-925D (ext) RP-925D (int)
TS-F-RP925IML-HD Half dummy set. Lever/knob interior mortise lock set. Sectional. RP-925D
Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m
PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.
14-31
Revised 02/08/16
Illustrations are for demonstration purposes only. Any knob, lever or ring pull can be combined with any style or size escutcheon plate.
926 CONTEMPORARY SECTIONAL INTERIOR MORTISE SETS
Complete sets with interior mortise lock and spindle. IML dummy trim screws are horizontal unless specified vertical (no charge).2 1/4” center-to-center.
Trim sets for interior mortise locks with spindle, no lock included. IML dummy trim screws are horizontal unless specified vertical (no charge). 2 1/4” center-to-center.
2 1/2” or 2 3/4” backset standard.Custom backsets available. Call for options and pricing.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.Note: Thru-bolt only.
CS-926IML – Complete passage set with interior
mortise lock and spindle. OR TS-926IML – Trim set only. No lock.
CS-926IML-PR – Complete privacy set with interior
mortise lock and spindle. OR TS-926IML-PR – Trim set only. No lock.
CS-926IML-PR-RC – Complete privacy set with interior
mortise lock and spindle. OR TS-926IML-PR-RC – Trim set only. No lock.
TS-926IML-FD – Trim set only. – Full dummy.
2 1/
2"
2 1/2"2 1/2"
2 1/
2"
2 1/
2"
1 5/8"
TS-926IML-HD – Trim set only. – Full dummy.
2 1/
2"
2 1/2"
2 1/
2"
2 1/2"2 1/2"
1 5/8"1 5/8"
2 1/
4"
1/8"
3/4"
1"
2 1/
4"
Specify manufacturer & function of interior mortise lock.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.Note: Thru-bolt only.
CS-926IML Passage set. Lever/knob x lever/knob interior mortise lock set. Sectional. P-926 (ext) P-926 (int)
CS-926IML-PR Privacy set. Lever/knob x lever/knob interior mortise lock set. Sectional. P-926 w/9157ERC (ext) P-926 w/9158TPC (int)
CS-926IML-PR-RC Privacy set. Lever/knob x lever/knob interior mortise lock set. Sectional. P-926 w/RC-9 (ext) P-926 w/9158TPC (int)
TS-926IML-FD Full dummy set. Lever/knob x lever/knob interior mortise lock set. Sectional. P-926D (ext) P-926D (int)
TS-926IML-HD Half dummy set. Lever/knob interior mortise lock set. Sectional. P-926D
TS-926IML Passage set. Lever/knob x lever/knob interior mortise lock set. Sectional. P-926 (ext) P-926 (int)
TS-926IML-PR Privacy set. Lever/knob x lever/knob interior mortise lock set. Sectional. P-926 w/9157ERC (ext) P-926 w/9158TPC (int)
TS-926IML-PR-RC Privacy set. Lever/knob x lever/knob interior mortise lock set. Sectional. P-926 w/RC-9 (ext) P-926 w/9158TPC (int)
TS-926IML-FD Full dummy set. Lever/knob x lever/knob interior mortise lock set. Sectional. P-926D (ext) P-926D (int)
TS-926IML-HD Half dummy set. Lever/knob interior mortise lock set. Sectional. P-926D
Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m
PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.
14-32
Revised 02/08/16
Illustrations are for demonstration purposes only. Any knob, lever or ring pull can be combined with any style or size escutcheon plate.
RP926 CONTEMPORARY SECTIONAL INTERIOR MORTISE SETS
Complete sets with interior mortise lock and spindle. IML dummy trim screws are horizontal unless specified vertical (no charge).2 1/4” center-to-center.
Trim sets for interior mortise locks with spindle, no lock included. IML dummy trim screws are horizontal unless specified vertical (no charge). 2 1/4” center-to-center.
2 1/2” or 2 3/4” backset standard.Custom backsets available. Call for options and pricing.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.Note: Thru-bolt only.
CS-RP926IML-PR – Complete privacy set with interior
mortise lock and spindle. OR TS-RP926IML-PR – Trim set only. No lock.
CS-RP926IML-PR-RC – Complete privacy set with interior
mortise lock and spindle. OR TS-RP926IML-PR-RC – Trim set only. No lock.
TS-RP926IML-FD – Trim set only. – Full dummy.
2 1/2"
2 1/
2"
2 1/2"
2 1/
2"
2 1/
2"
2 1/
2"
CS-RP926IML – Complete passage set with interior
mortise lock and spindle. OR TS-RP926IML – Trim set only. No lock.
TS-RP926IML-HD – Trim set only. – Full dummy.
2 1/2"2 1/2"
2 1/
2"
2 1/2"
1 5/8"1 5/8"1 5/8"
2 1/
4"
2 1/
4"
1/8"
3/4"
1"
Specify manufacturer & function of interior mortise lock.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.Note: Thru-bolt only.
CS-RP926IML Passage set. Lever/knob x lever/knob interior mortise lock set. Sectional. RP-926 (ext) RP-926 (int)
CS-RP926IML-PR Privacy set. Lever/knob x lever/knob interior mortise lock set. Sectional. RP-926 w/RP-9157ERC (ext) RP-926 w/RP-9158TPC (int)
CS-RP926IML-PR-RC Privacy set. Lever/knob x lever/knob interior mortise lock set. Sectional. RP-926 w/RC-9 (ext) RP-926 w/RP-9158TPC (int)
TS-RP926IML-FD Full dummy set. Lever/knob x lever/knob interior mortise lock set. Sectional. RP-926D (ext) RP-926D (int)
TS-RP926IML-HD Half dummy set. Lever/knob interior mortise lock set. Sectional. RP-926D
TS-RP926IML Passage set. Lever/knob x lever/knob interior mortise lock set. Sectional. RP-926 (ext) RP-926 (int)
TS-RP926IML-PR Privacy set. Lever/knob x lever/knob interior mortise lock set. Sectional. RP-926 w/RP-9157ERC (ext) RP-926 w/RP-9158TPC (int)
TS-RP926IML-PR-RC Privacy set. Lever/knob x lever/knob interior mortise lock set. Sectional. RP-926 w/RC-9 (ext) RP-926 w/RP-9158TPC (int)
TS-RP926IML-FD Full dummy set. Lever/knob x lever/knob interior mortise lock set. Sectional. RP-926D (ext) RP-926D (int)
TS-RP926IML-HD Half dummy set. Lever/knob interior mortise lock set. Sectional. RP-926D
Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m
PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.
14-33
Revised 02/08/16
Illustrations are for demonstration purposes only. Any knob, lever or ring pull can be combined with any style or size escutcheon plate.
F926 CONTEMPORARY SECTIONAL INTERIOR MORTISE SETS
Complete sets with interior mortise lock and spindle. IML dummy trim screws are horizontal unless specified vertical (no charge).2 1/4” center-to-center.
Trim sets for interior mortise locks with spindle, no lock included. IML dummy trim screws are horizontal unless specified vertical (no charge). 2 1/4” center-to-center.
2 1/2” or 2 3/4” backset standard.Custom backsets available. Call for options and pricing.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.Note: Thru-bolt only.
CS-F926IML – Complete passage set with interior
mortise lock and spindle. OR TS-F926IML – Trim set only. No lock.
CS-F926IML-PR – Complete privacy set with interior
mortise lock and spindle. OR TS-F926IML-PR – Trim set only. No lock.
CS-F926IML-PR-RC – Complete privacy set with interior
mortise lock and spindle. OR TS-F926IML-PR-RC – Trim set only. No lock.
TS-F926IML-FD – Trim set only. – Full dummy.
2 1/
2"
2 1/2"2 1/2"
2 1/
2"
2 1/
2"
1 5/8"
TS-F926IML-HD – Trim set only. – Full dummy.
2 1/
2"
2 1/2"
2 1/
2"
2 1/2"2 1/2"
1 5/8"1 5/8"
2 1/
4"
1/8"
3/4"
1" 2 1/
4"
2 1/2"2 1/2" 2 1/2"2 1/2"
Specify manufacturer & function of interior mortise lock.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.Note: Thru-bolt only.
CS-F926IML Passage set. Lever/knob x lever/knob interior mortise lock set. Sectional. P-926 (ext) P-926 (int)
CS-F926IML-PR Privacy set. Lever/knob x lever/knob interior mortise lock set. Sectional. P-926 w/9157ERC (ext) P-926 w/9158TPC (int)
CS-F926IML-PR-RC Privacy set. Lever/knob x lever/knob interior mortise lock set. Sectional. P-926 w/RC-9 (ext) P-926 w/9158TPC (int)
TS-F926IML-FD Full dummy set. Lever/knob x lever/knob interior mortise lock set. Sectional. P-926D (ext) P-926D (int)
TS-F926IML-HD Half dummy set. Lever/knob interior mortise lock set. Sectional. P-926D
TS-F926IML Passage set. Lever/knob x lever/knob interior mortise lock set. Sectional. P-926 (ext) P-926 (int)
TS-F926IML-PR Privacy set. Lever/knob x lever/knob interior mortise lock set. Sectional. P-926 w/9157ERC (ext) P-926 w/9158TPC (int)
TS-F926IML-PR-RC Privacy set. Lever/knob x lever/knob interior mortise lock set. Sectional. P-926 w/RC-9 (ext) P-926 w/9158TPC (int)
TS-F926IML-FD Full dummy set. Lever/knob x lever/knob interior mortise lock set. Sectional. P-926D (ext) P-926D (int)
TS-F926IML-HD Half dummy set. Lever/knob interior mortise lock set. Sectional. P-926D
Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m
PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.
14-34
Revised 02/08/16
Illustrations are for demonstration purposes only. Any knob, lever or ring pull can be combined with any style or size escutcheon plate.
F-RP926 CONTEMPORARY SECTIONAL INTERIOR MORTISE SETS
Complete sets with interior mortise lock and spindle. IML dummy trim screws are horizontal unless specified vertical (no charge).2 1/4” center-to-center.
Trim sets for interior mortise locks with spindle, no lock included. IML dummy trim screws are horizontal unless specified vertical (no charge). 2 1/4” center-to-center.
2 1/2” or 2 3/4” backset standard.Custom backsets available. Call for options and pricing.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.Note: Thru-bolt only.
CS-F-RP926IML-PR – Complete privacy set with interior
mortise lock and spindle. OR TS-F-RP926IML-PR – Trim set only. No lock.
CS-F-RP926IML-PR-RC – Complete privacy set with interior
mortise lock and spindle. OR TS-F-RP926IML-PR-RC – Trim set only. No lock.
TS-F-RP926IML-FD – Trim set only. – Full dummy.
2 1/2"
2 1/
2"
2 1/2"
2 1/
2"
2 1/
2"
2 1/
2"
CS-F-RP926IML – Complete passage set with interior
mortise lock and spindle. OR TS-F-RP926IML – Trim set only. No lock.
TS-F-RP926IML-HD – Trim set only. – Full dummy.
2 1/2"2 1/2"
2 1/
2"
2 1/2"
1 5/8"1 5/8"1 5/8"
2 1/
4"
2 1/
4"
2 1/2" 2 1/2" 2 1/2" 2 1/2"
1/8"
3/4"
1"
Specify manufacturer & function of interior mortise lock.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.Note: Thru-bolt only.
CS-F-RP926IML Passage set. Lever/knob x lever/knob interior mortise lock set. Sectional. RP-926 (ext) RP-926 (int)
CS-F-RP926IML-PR Privacy set. Lever/knob x lever/knob interior mortise lock set. Sectional. RP-926 w/RP-9157ERC (ext) RP-926 w/RP-9158TPC (int)
CS-F-RP926IML-PR-RC Privacy set. Lever/knob x lever/knob interior mortise lock set. Sectional. RP-926 w/RC-9 (ext) RP-926 w/RP-9158TPC (int)
TS-F-RP926IML-FD Full dummy set. Lever/knob x lever/knob interior mortise lock set. Sectional. RP-926D (ext) RP-926D (int)
TS-F-RP926IML-HD Half dummy set. Lever/knob interior mortise lock set. Sectional. RP-926D
TS-F-RP926IML Passage set. Lever/knob x lever/knob interior mortise lock set. Sectional. RP-926 (ext) RP-926 (int)
TS-F-RP926IML-PR Privacy set. Lever/knob x lever/knob interior mortise lock set. Sectional. RP-926 w/RP-9157ERC (ext) RP-926 w/RP-9158TPC (int)
TS-F-RP926IML-PR-RC Privacy set. Lever/knob x lever/knob interior mortise lock set. Sectional. RP-926 w/RC-9 (ext) RP-926 w/RP-9158TPC (int)
TS-F-RP926IML-FD Full dummy set. Lever/knob x lever/knob interior mortise lock set. Sectional. RP-926D (ext) RP-926D (int)
TS-F-RP926IML-HD Half dummy set. Lever/knob interior mortise lock set. Sectional. RP-926D
Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m
PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.
14-35
Revised 02/08/16
Illustrations are for demonstration purposes only. Any knob, lever or ring pull can be combined with any style or size escutcheon plate.
925-8 CONTEMPORARY SECTIONAL INTERIOR MORTISE SETS
Complete sets with interior mortise lock and spindle. IML dummy trim screws are horizontal unless specified vertical (no charge).
Trim sets for interior mortise locks with spindle, no lock included. IML dummy trim screws are horizontal unless specified vertical (no charge).
CS-925-8IML – Complete passage set with interior
mortise lock and spindle. OR TS-925-8IML – Trim set only. No lock.
TS-925-8IML-HD – Trim set only. – Half dummy.
2 1/
4"
2 1/4"
2 1/
4"
2 1/4"2 1/4"
TS-925-8IML-FD – Trim set only. – Full dummy.
2 1/
4"
2 1/4"2 1/4"
2 1/2” or 2 3/4” backset standard.Custom backsets available. Call for options and pricing.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.Note: Thru-bolt only.
Specify manufacturer & function of interior mortise lock.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.Note: Thru-bolt only.
CS-925-8IML Passage set. Lever/knob x lever/knob interior mortise lock set. Sectional. P-925 (ext) P-925 (int)
TS-925-8IML-FD Full dummy set. Lever/knob x lever/knob interior mortise lock set. Sectional. P-925D (ext) P-925D (int)
TS-925-8IML-HD Half dummy set. Lever/knob interior mortise lock set. Sectional. P-925D
TS-925-8IML Passage set. Lever/knob x lever/knob interior mortise lock set. Sectional. P-925 (ext) P-925 (int)
TS-925-8IML-FD Full dummy set. Lever/knob x lever/knob interior mortise lock set. Sectional. P-925D (ext) P-925D (int)
TS-925-8IML-HD Half dummy set. Lever/knob interior mortise lock set. Sectional. P-925D
Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m
PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.
14-36
Revised 02/08/16
Illustrations are for demonstration purposes only. Any knob, lever or ring pull can be combined with any style or size escutcheon plate.
925-8 CONTEMPORARY SECTIONAL INTERIOR MORTISE SETS
Complete sets with interior mortise lock and spindle. IML dummy trim screws are horizontal unless specified vertical (no charge).2 7/8” center-to-center.
Trim sets for interior mortise locks with spindle, no lock included. IML dummy trim screws are horizontal unless specified vertical (no charge). 2 7/8” center-to-center.
CS-925-8x9158IML-PR – Complete privacy set with interior
mortise lock and spindle. OR TS-925-8x9158IML-PR – Trim set only. No lock.
CS-925-8x9175IML-PR – Complete privacy set with interior
mortise lock and spindle. OR TS-925-8x9175IML-PR – Trim set only. No lock.
CS-925-8x9200IML-PR – Complete privacy set with interior
mortise lock and spindle. OR TS-925-8x9200IML-PR – Trim set only. No lock.
1 3/4"1 3/4"
2 1/
4"
2"
2 1/
4" 2 7/
8"
2 1/
4"
CS-925-8x9225IML-PR – Complete privacy set with interior
mortise lock and spindle. OR
TS-925-8x9225IML-PR – Trim set only. No lock.
2 1/
4"2 7/
8"
1 5/8"1 5/8"
2 7/
8"
2 7/
8"
2 1/4"2" 2 1/4"
11/1
6"
13/1
6"
7/8"
9/16
"2 1/2” or 2 3/4” backset standard.Custom backsets available. Call for options and pricing.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.Note: Thru-bolt only.
Specify manufacturer & function of interior mortise lock.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.Note: Thru-bolt only.
CS-925-8x9158IML-PR Privacy set. Lever/knob x lever/knob interior mortise lock set. Sectional. P-925 w/9157ERC (ext) P-925 w/9158TPC (int)
CS-925-8x9175IML-PR Privacy set. Lever/knob x lever/knob interior mortise lock set. Sectional. P-925 w/9496ERC (ext) P-925 w/9497TPC (int)
CS-925-8x9200IML-PR Privacy set. Lever/knob x lever/knob interior mortise lock set. Sectional. P-925 w/9494ERC (ext) P-925 w/9495TPC (int)
CS-925-8x9225IML-PR Privacy set. Lever/knob x lever/knob interior mortise lock set. Sectional. P-925 w/9492ERC (ext) P-925 w/9493TPC (int)
TS-925-8x9158IML-PR Privacy set. Lever/knob x lever/knob interior mortise lock set. Sectional. P-925 w/9157ERC (ext) P-925 w/9158TPC (int)
TS-925-8x9175IML-PR Privacy set. Lever/knob x lever/knob interior mortise lock set. Sectional. P-925 w/9496ERC (ext) P-925 w/9497TPC (int)
TS-925-8x9200IML-PR Privacy set. Lever/knob x lever/knob interior mortise lock set. Sectional. P-925 w/9494ERC (ext) P-925 w/9495TPC (int)
TS-925-8x9225IML-PR Privacy set. Lever/knob x lever/knob interior mortise lock set. Sectional. P-925 w/9492ERC (ext) P-925 w/9493TPC (int)
Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m
PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.
14-37
Revised 02/08/16
Illustrations are for demonstration purposes only. Any knob, lever or ring pull can be combined with any style or size escutcheon plate.
RP925-8 CONTEMPORARY SECTIONAL INTERIOR MORTISE SETS
Complete sets with interior mortise lock and spindle. IML dummy trim screws are horizontal unless specified vertical (no charge).
Trim sets for interior mortise locks with spindle, no lock included. IML dummy trim screws are horizontal unless specified vertical (no charge).
CS-RP925-8IML – Complete passage set with interior
mortise lock and spindle. OR TS-RP925-8IML – Trim set only. No lock.
TS-RP925-8IML-FD – Trim set only. – Full dummy.
2 1/
4"
2 1/4"2 1/4"
2 1/
4"
2 1/4"2 1/4"
TS-RP925-8IML-HD – Trim set only. – Half dummy.
2 1/
4"
2 1/4"
2 1/2” or 2 3/4” backset standard.Custom backsets available. Call for options and pricing.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.Note: Thru-bolt only.
Specify manufacturer & function of interior mortise lock.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.Note: Thru-bolt only.
CS-RP925-8IML Passage set. Lever/knob x lever/knob interior mortise lock set. Sectional. RP-925 (ext) RP-925 (int)
TS-RP925-8IML-FD Full dummy set. Lever/knob x lever/knob interior mortise lock set. Sectional. RP-925D (ext) RP-925D (int)
TS-RP925-8IML-HD Half dummy set. Lever/knob interior mortise lock set. Sectional. RP-925D
TS-RP925-8IML Passage set. Lever/knob x lever/knob interior mortise lock set. Sectional. RP-925 (ext) RP-925 (int)
TS-RP925-8IML-FD Full dummy set. Lever/knob x lever/knob interior mortise lock set. Sectional. RP-925D (ext) RP-925D (int)
TS-RP925-8IML-HD Half dummy set. Lever/knob interior mortise lock set. Sectional. RP-925D
Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m
PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.
14-38
Revised 02/08/16
Illustrations are for demonstration purposes only. Any knob, lever or ring pull can be combined with any style or size escutcheon plate.
RP925-8 CONTEMPORARY SECTIONAL INTERIOR MORTISE SETS
Complete sets with interior mortise lock and spindle. IML dummy trim screws are horizontal unless specified vertical (no charge).2 7/8” center-to-center.
Trim sets for interior mortise locks with spindle, no lock included. IML dummy trim screws are horizontal unless specified vertical (no charge). 2 7/8” center-to-center.
CS-RP925-8xRP9175IML-PR – Complete privacy set with interior
mortise lock and spindle. OR TS-RP925-8xRP9175IML-PR – Trim set only. No lock.
CS-RP925-8xRP9200IML-PR – Complete privacy set with interior
mortise lock and spindle. OR TS-RP925-8xRP9200IML-PR – Trim set only. No lock.
CS-RP925-8xRP9225IML-PR – Complete privacy set with interior
mortise lock and spindle. OR TS-RP925-8xRP9225IML-PR – Trim set only. No lock.
CS-RP925-8xRP9158IML-PR – Complete privacy set with interior
mortise lock and spindle. OR TS-RP925-8xRP9158IML-PR – Trim set only. No lock.
2 1/
4"1 5/8"
2 7/
8"
1 5/8"
2 1/
4"
1 3/4"
2 7/
8"
1 3/4"
2 1/
4"
2"
2 7/
8"
2"
2 1/
4"
2 1/4"
2 7/
8"
2 1/4"
11/1
6"
13/1
6"
7/8"
9/16
"
2 1/2” or 2 3/4” backset standard.Custom backsets available. Call for options and pricing.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.Note: Thru-bolt only.
Specify manufacturer & function of interior mortise lock.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.Note: Thru-bolt only.
CS-RP925-8xRP9158IML-PR Privacy set. Lever/knob x lever/knob interior mortise lock set. Sectional. RP-925 w/RP-9157ERC (ext) RP-925 w/RP-9158TPC (int)
CS-RP925-8xRP9175IML-PR Privacy set. Lever/knob x lever/knob interior mortise lock set. Sectional. RP-925 w/RP-9498ERC (ext) RP-925 w/RP-9499TPC (int)
CS-RP925-8xRP9200IML-PR Privacy set. Lever/knob x lever/knob interior mortise lock set. Sectional. RP-925 w/RP-9494ERC (ext) RP-925 w/RP-9495TPC (int)
CS-RP925-8xRP9225IML-PR Privacy set. Lever/knob x lever/knob interior mortise lock set. Sectional. RP-925 w/RP-9490ERC (ext) RP-925 w/RP-9491TPC (int)
TS-RP925-8xRP9158IML-PR Privacy set. Lever/knob x lever/knob interior mortise lock set. Sectional. RP-925 w/RP-9157ERC (ext) RP-925 w/RP-9158TPC (int)
TS-RP925-8xRP9175IML-PR Privacy set. Lever/knob x lever/knob interior mortise lock set. Sectional. RP-925 w/RP-9498ERC (ext) RP-925 w/RP-9499TPC (int)
TS-RP925-8xRP9200IML-PR Privacy set. Lever/knob x lever/knob interior mortise lock set. Sectional. RP-925 w/RP-9494ERC (ext) RP-925 w/RP-9495TPC (int)
TS-RP925-8xRP9225IML-PR Privacy set. Lever/knob x lever/knob interior mortise lock set. Sectional. RP-925 w/RP-9490ERC (ext) RP-925 w/RP-9491TPC (int)
Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m
PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.
14-39
Revised 02/08/16
Illustrations are for demonstration purposes only. Any knob, lever or ring pull can be combined with any style or size escutcheon plate.
F925-8 CONTEMPORARY SECTIONAL INTERIOR MORTISE SETS
Complete sets with interior mortise lock and spindle. IML dummy trim screws are horizontal unless specified vertical (no charge).
Trim sets for interior mortise locks with spindle, no lock included. IML dummy trim screws are horizontal unless specified vertical (no charge).
CS-F925-8IML – Complete passage set with interior
mortise lock and spindle. OR TS-F925-8IML – Trim set only. No lock.
TS-F925-8IML-HD – Trim set only. – Half dummy.
2 1/
4"
2 1/4"
2 1/
4"
2 1/4"2 1/4"
TS-F925-8IML-FD – Trim set only. – Full dummy.
2 1/
4"
2 1/4"2 1/4"
2 1/2” or 2 3/4” backset standard.Custom backsets available. Call for options and pricing.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.Note: Thru-bolt only.
Specify manufacturer & function of interior mortise lock.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.Note: Thru-bolt only.
CS-F925-8IML Passage set. Lever/knob x lever/knob interior mortise lock set. Sectional. P-925 (ext) P-925 (int)
TS-F925-8IML-FD Full dummy set. Lever/knob x lever/knob interior mortise lock set. Sectional. P-925D (ext) P-925D (int)
TS-F925-8IML-HD Half dummy set. Lever/knob interior mortise lock set. Sectional. P-925D
TS-F925-8IML Passage set. Lever/knob x lever/knob interior mortise lock set. Sectional. P-925 (ext) P-925 (int)
TS-F925-8IML-FD Full dummy set. Lever/knob x lever/knob interior mortise lock set. Sectional. P-925D (ext) P-925D (int)
TS-F925-8IML-HD Half dummy set. Lever/knob interior mortise lock set. Sectional. P-925D
Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m
PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.
14-40
Revised 02/08/16
Illustrations are for demonstration purposes only. Any knob, lever or ring pull can be combined with any style or size escutcheon plate.
F925-8 CONTEMPORARY SECTIONAL INTERIOR MORTISE SETS
Complete sets with interior mortise lock and spindle. IML dummy trim screws are horizontal unless specified vertical (no charge).2 7/8” center-to-center.
Trim sets for interior mortise locks with spindle, no lock included. IML dummy trim screws are horizontal unless specified vertical (no charge). 2 7/8” center-to-center.
CS-F925-8x9158IML-PR – Complete privacy set with interior
mortise lock and spindle. OR TS-F925-8x9158IML-PR – Trim set only. No lock.
CS-F925-8x9175IML-PR – Complete privacy set with interior
mortise lock and spindle. OR TS-F925-8x9175IML-PR – Trim set only. No lock.
CS-F925-8x9200IML-PR – Complete privacy set with interior
mortise lock and spindle. OR TS-F925-8x9200IML-PR – Trim set only. No lock.
1 3/4"1 3/4"
2 1/
4"
2"
2 1/
4"
1 5/8"1 5/8"
2 1/
4"
2 7/
8"
2 1/4"2 1/4"
2 1/
4"
CS-F925-8x9225IML-PR – Complete privacy set with interior
mortise lock and spindle. OR TS-F925-8x9225IML-PR – Trim set only. No lock.
2 7/
8"
2 7/
8"
2 7/
8"
2"
11/1
6"
13/1
6"
7/8"
9/16
"
2 1/4"2 1/4"2 1/4"2 1/4"2 1/4"2 1/4"
2 1/4" 2 1/4"
2 1/2” or 2 3/4” backset standard.Custom backsets available. Call for options and pricing.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.Note: Thru-bolt only.
Specify manufacturer & function of interior mortise lock.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.Note: Thru-bolt only.
CS-F925-8x9158IML-PR Privacy set. Lever/knob x lever/knob interior mortise lock set. Sectional. P-925 w/9157ERC (ext) P-925 w/9158TPC (int)
CS-F925-8x9175IML-PR Privacy set. Lever/knob x lever/knob interior mortise lock set. Sectional. P-925 w/9496ERC (ext) P-925 w/9497TPC (int)
CS-F925-8x9200IML-PR Privacy set. Lever/knob x lever/knob interior mortise lock set. Sectional. P-925 w/9494ERC (ext) P-925 w/9495TPC (int)
CS-F925-8x9225IML-PR Privacy set. Lever/knob x lever/knob interior mortise lock set. Sectional. P-925 w/9492ERC (ext) P-925 w/9493TPC (int)
TS-F925-8x9158IML-PR Privacy set. Lever/knob x lever/knob interior mortise lock set. Sectional. P-925 w/9157ERC (ext) P-925 w/9158TPC (int)
TS-F925-8x9175IML-PR Privacy set. Lever/knob x lever/knob interior mortise lock set. Sectional. P-925 w/9496ERC (ext) P-925 w/9497TPC (int)
TS-F925-8x9200IML-PR Privacy set. Lever/knob x lever/knob interior mortise lock set. Sectional. P-925 w/9494ERC (ext) P-925 w/9495TPC (int)
TS-F925-8x9225IML-PR Privacy set. Lever/knob x lever/knob interior mortise lock set. Sectional. P-925 w/9492ERC (ext) P-925 w/9493TPC (int)
Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m
PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.
14-41
Revised 02/08/16
Illustrations are for demonstration purposes only. Any knob, lever or ring pull can be combined with any style or size escutcheon plate.
F-RP925-8 CONTEMPORARY SECTIONAL INTERIOR MORTISE SETS
Complete sets with interior mortise lock and spindle. IML dummy trim screws are horizontal unless specified vertical (no charge).
Trim sets for interior mortise locks with spindle, no lock included. IML dummy trim screws are horizontal unless specified vertical (no charge).
CS-F-RP925-8IML – Complete passage set with interior
mortise lock and spindle. OR TS-F-RP925-8IML – Trim set only. No lock.
TS-F-RP925-8IML-FD – Trim set only. – Full dummy.
2 1/
4"
2 1/4"2 1/4"
2 1/
4"
2 1/4"2 1/4"
TS-F-RP925-8IML-HD – Trim set only. – Half dummy.
2 1/
4"
2 1/4"
2 1/2” or 2 3/4” backset standard.Custom backsets available. Call for options and pricing.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.Note: Thru-bolt only.
Specify manufacturer & function of interior mortise lock.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.Note: Thru-bolt only.
CS-F-RP925-8IML Passage set. Lever/knob x lever/knob interior mortise lock set. Sectional. RP-925 (ext) RP-925 (int)
TS-F-RP925-8IML-FD Full dummy set. Lever/knob x lever/knob interior mortise lock set. Sectional. RP-925D (ext) RP-925D (int)
TS-F-RP925-8IML-HD Half dummy set. Lever/knob interior mortise lock set. Sectional. RP-925D
TS-F-RP925-8IML Passage set. Lever/knob x lever/knob interior mortise lock set. Sectional. RP-925 (ext) RP-925 (int)
TS-F-RP925-8IML-FD Full dummy set. Lever/knob x lever/knob interior mortise lock set. Sectional. RP-925D (ext) RP-925D (int)
TS-F-RP925-8IML-HD Half dummy set. Lever/knob interior mortise lock set. Sectional. RP-925D
Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m
PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.
14-42
Revised 02/08/16
Illustrations are for demonstration purposes only. Any knob, lever or ring pull can be combined with any style or size escutcheon plate.
F-RP925-8 CONTEMPORARY SECTIONAL INTERIOR MORTISE SETS
Complete sets with interior mortise lock and spindle. IML dummy trim screws are horizontal unless specified vertical (no charge).2 7/8” center-to-center.
Trim sets for interior mortise locks with spindle, no lock included. IML dummy trim screws are horizontal unless specified vertical (no charge). 2 7/8” center-to-center.
CS-F-RP925-8xRP9158IML-PR – Complete privacy set with interior
mortise lock and spindle. OR TS-F-RP925-8xRP9158IML-PR – Trim set only. No lock.
CS-F-RP925-8xRP9175IML-PR – Complete privacy set with interior
mortise lock and spindle. OR TS-F-RP925-8xRP9175IML-PR – Trim set only. No lock.
CS-F-RP925-8xRP9200IML-PR – Complete privacy set with interior
mortise lock and spindle. OR TS-F-RP925-8xRP9200IML-PR – Trim set only. No lock.
CS-F-RP925-8xRP9225IML-PR – Complete privacy set with interior
mortise lock and spindle. OR TS-F-RP925-8xRP9225IML-PR – Trim set only. No lock.
2 1/
4"
1 3/4"1 3/4"
2 1/
4"
1 5/8"
2 7/
8"
1 5/8"
2 1/
4"
2"2"
2 1/
4"
2 1/4"2 1/4"
2 7/
8"
2 7/
8"
2 7/
8"
11/1
6"
13/1
6"
7/8"
9/16
"
2 1/4" 2 1/4" 2 1/4" 2 1/4" 2 1/4" 2 1/4" 2 1/4" 2 1/4"
2 1/2” or 2 3/4” backset standard.Custom backsets available. Call for options and pricing.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.Note: Thru-bolt only.
Specify manufacturer & function of interior mortise lock.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.Note: Thru-bolt only.
CS-F-RP925-8xRP9158IML-PR Privacy set. Lever/knob x lever/knob interior mortise lock set. Sectional. RP-925 w/RP-9157ERC (ext) RP-925 w/RP-9158TPC (int)
CS-F-RP925-8xRP9175IML-PR Privacy set. Lever/knob x lever/knob interior mortise lock set. Sectional. RP-925 w/RP-9498ERC (ext) RP-925 w/RP-9499TPC (int)
CS-F-RP925-8xRP9200IML-PR Privacy set. Lever/knob x lever/knob interior mortise lock set. Sectional. RP-925 w/RP-9494ERC (ext) RP-925 w/RP-9495TPC (int)
CS-F-RP925-8xRP9225IML-PR Privacy set. Lever/knob x lever/knob interior mortise lock set. Sectional. RP-925 w/RP-9490ERC (ext) RP-925 w/RP-9491TPC (int)
TS-F-RP925-8xRP9158IML-PR Privacy set. Lever/knob x lever/knob interior mortise lock set. Sectional. RP-925 w/RP-9157ERC (ext) RP-925 w/RP-9158TPC (int)
TS-F-RP925-8xRP9175IML-PR Privacy set. Lever/knob x lever/knob interior mortise lock set. Sectional. RP-925 w/RP-9498ERC (ext) RP-925 w/RP-9499TPC (int)
TS-F-RP925-8xRP9200IML-PR Privacy set. Lever/knob x lever/knob interior mortise lock set. Sectional. RP-925 w/RP-9494ERC (ext) RP-925 w/RP-9495TPC (int)
TS-F-RP925-8xRP9225IML-PR Privacy set. Lever/knob x lever/knob interior mortise lock set. Sectional. RP-925 w/RP-9490ERC (ext) RP-925 w/RP-9491TPC (int)
Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m
PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.
14-43
Revised 02/08/16
Illustrations are for demonstration purposes only. Any knob, lever or ring pull can be combined with any style or size escutcheon plate.
926-8 CONTEMPORARY SECTIONAL INTERIOR MORTISE SETS
Complete sets with interior mortise lock and spindle. IML dummy trim screws are horizontal unless specified vertical (no charge).
Trim sets for interior mortise locks with spindle, no lock included. IML dummy trim screws are horizontal unless specified vertical (no charge).
CS-926-8IML – Complete passage set with interior
mortise lock and spindle. OR TS-926-8IML – Trim set only. No lock.
TS-926-8IML-FD – Trim set only. – Full dummy.
2 1/
2"
2 1/2"2 1/2"
TS-926-8IML-HD – Trim set only. – Full dummy.
2 1/
2"
2 1/2"
2 1/
2"
2 1/2"2 1/2"
2 1/2” or 2 3/4” backset standard.Custom backsets available. Call for options and pricing.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.Note: Thru-bolt only.
Specify manufacturer & function of interior mortise lock.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.Note: Thru-bolt only.
CS-926-8IML Passage set. Lever/knob x lever/knob interior mortise lock set. Sectional. P-926 (ext) P-926 (int)
TS-926-8IML-FD Full dummy set. Lever/knob x lever/knob interior mortise lock set. Sectional. P-926D (ext) P-926D (int)
TS-926-8IML-HD Half dummy set. Lever/knob interior mortise lock set. Sectional. P-926D
TS-926-8IML Passage set. Lever/knob x lever/knob interior mortise lock set. Sectional. P-926 (ext) P-926 (int)
TS-926-8IML-FD Full dummy set. Lever/knob x lever/knob interior mortise lock set. Sectional. P-926D (ext) P-926D (int)
TS-926-8IML-HD Half dummy set. Lever/knob interior mortise lock set. Sectional. P-926D
Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m
PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.
14-44
Revised 02/08/16
Illustrations are for demonstration purposes only. Any knob, lever or ring pull can be combined with any style or size escutcheon plate.
926-8 CONTEMPORARY SECTIONAL INTERIOR MORTISE SETS
Complete sets with interior mortise lock and spindle. IML dummy trim screws are horizontal unless specified vertical (no charge).2 7/8” center-to-center.
Trim sets for interior mortise locks with spindle, no lock included. IML dummy trim screws are horizontal unless specified vertical (no charge). 2 7/8” center-to-center.
CS-926-8x9158IML-PR – Complete privacy set with interior
mortise lock and spindle. OR TS-926-8x9158IML-PR – Trim set only. No lock.
CS-926-8x9175IML-PR – Complete privacy set with interior
mortise lock and spindle. OR TS-926-8x9175IML-PR – Trim set only. No lock.
CS-926-8x9200IML-PR – Complete privacy set with interior
mortise lock and spindle. OR TS-926-8x9200IML-PR – Trim set only. No lock.
CS-926-8x9225IML-PR – Complete privacy set with interior
mortise lock and spindle. OR TS-926-8x9225IML-PR – Trim set only. No lock.
2 1/
2"
1 3/4"1 3/4"
2 7/
8"
2 1/
2"1 5/8"1 5/8"
2 7/
8"
2 1/
2"
2"2"
2 7/
8"
2 1/
2"
2 1/4"2 1/4"
2 7/
8"
9/16
"
11/1
6"
3/4"
7/16
"
2 1/2” or 2 3/4” backset standard.Custom backsets available. Call for options and pricing.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.Note: Thru-bolt only.
Specify manufacturer & function of interior mortise lock.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.Note: Thru-bolt only.
CS-926-8x9158IML-PR Privacy set. Lever/knob x lever/knob interior mortise lock set. Sectional. P-926 w/9157ERC (ext) P-926 w/9158TPC (int)
CS-926-8x9175IML-PR Privacy set. Lever/knob x lever/knob interior mortise lock set. Sectional. P-926 w/9496ERC (ext) P-926 w/9497TPC (int)
CS-926-8x9200IML-PR Privacy set. Lever/knob x lever/knob interior mortise lock set. Sectional. P-926 w/9494ERC (ext) P-926 w/9495TPC (int)
CS-926-8x9225IML-PR Privacy set. Lever/knob x lever/knob interior mortise lock set. Sectional. P-926 w/9492ERC (ext) P-926 w/9493TPC (int)
TS-926-8x9158IML-PR Privacy set. Lever/knob x lever/knob interior mortise lock set. Sectional. P-926 w/9157ERC (ext) P-926 w/9158TPC (int)
TS-926-8x9175IML-PR Privacy set. Lever/knob x lever/knob interior mortise lock set. Sectional. P-926 w/9496ERC (ext) P-926 w/9497TPC (int)
TS-926-8x9200IML-PR Privacy set. Lever/knob x lever/knob interior mortise lock set. Sectional. P-926 w/9494ERC (ext) P-926 w/9495TPC (int)
TS-926-8x9225IML-PR Privacy set. Lever/knob x lever/knob interior mortise lock set. Sectional. P-926 w/9492ERC (ext) P-926 w/9493TPC (int)
Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m
PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.
14-45
Revised 02/08/16
Illustrations are for demonstration purposes only. Any knob, lever or ring pull can be combined with any style or size escutcheon plate.
F926-8 CONTEMPORARY SECTIONAL INTERIOR MORTISE SETS
Complete sets with interior mortise lock and spindle. IML dummy trim screws are horizontal unless specified vertical (no charge).
Trim sets for interior mortise locks with spindle, no lock included. IML dummy trim screws are horizontal unless specified vertical (no charge).
CS-F926-8IML – Complete passage set with interior
mortise lock and spindle. OR TS-F926-8IML – Trim set only. No lock.
TS-F926-8IML-FD – Trim set only. – Full dummy.
2 1/
2"
2 1/2"2 1/2"
TS-F926-8IML-HD – Trim set only. – Full dummy.
2 1/
2"
2 1/2"
2 1/
2"
2 1/2"2 1/2"
2 1/2” or 2 3/4” backset standard.Custom backsets available. Call for options and pricing.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.Note: Thru-bolt only.
Specify manufacturer & function of interior mortise lock.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.Note: Thru-bolt only.
CS-F926-8IML Passage set. Lever/knob x lever/knob interior mortise lock set. Sectional. P-926 (ext) P-926 (int)
TS-F926-8IML-FD Full dummy set. Lever/knob x lever/knob interior mortise lock set. Sectional. P-926D (ext) P-926D (int)
TS-F926-8IML-HD Half dummy set. Lever/knob interior mortise lock set. Sectional. P-926D
TS-F926-8IML Passage set. Lever/knob x lever/knob interior mortise lock set. Sectional. P-926 (ext) P-926 (int)
TS-F926-8IML-FD Full dummy set. Lever/knob x lever/knob interior mortise lock set. Sectional. P-926D (ext) P-926D (int)
TS-F926-8IML-HD Half dummy set. Lever/knob interior mortise lock set. Sectional. P-926D
Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m
PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.
14-46
Revised 02/08/16
Illustrations are for demonstration purposes only. Any knob, lever or ring pull can be combined with any style or size escutcheon plate.
F926-8 CONTEMPORARY SECTIONAL INTERIOR MORTISE SETS
Complete sets with interior mortise lock and spindle. IML dummy trim screws are horizontal unless specified vertical (no charge).2 7/8” center-to-center.
Trim sets for interior mortise locks with spindle, no lock included. IML dummy trim screws are horizontal unless specified vertical (no charge). 2 7/8” center-to-center.
CS-F926-8x9175IML-PR – Complete privacy set with interior
mortise lock and spindle. OR TS-F926-8x9175IML-PR – Trim set only. No lock.
2 1/
2"
1 3/4"1 3/4"
2 7/
8"
CS-F926-8x9158IML-PR – Complete privacy set with interior
mortise lock and spindle. OR TS-F926-8x9158IML-PR – Trim set only. No lock.
2 1/
2"
1 5/8"1 5/8"
2 7/
8"
CS-F926-8x9200IML-PR – Complete privacy set with interior
mortise lock and spindle. OR TS-F926-8x9200IML-PR – Trim set only. No lock.
2 1/
2"
2"2"
2 7/
8"
CS-F926-8x9225IML-PR – Complete privacy set with interior
mortise lock and spindle. OR TS-F926-8x9225IML-PR – Trim set only. No lock.
2 1/
2"
2 1/4"2 1/4"
2 7/
8"
9/16
"
11/1
6"
3/4"
7/16
"
2 1/2" 2 1/2" 2 1/2" 2 1/2" 2 1/2" 2 1/2" 2 1/2" 2 1/2"
2 1/2” or 2 3/4” backset standard.Custom backsets available. Call for options and pricing.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.Note: Thru-bolt only.
Specify manufacturer & function of interior mortise lock.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.Note: Thru-bolt only.
CS-F926-8x9158IML-PR Privacy set. Lever/knob x lever/knob interior mortise lock set. Sectional. P-926 w/9157ERC (ext) P-926 w/9158TPC (int)
CS-F926-8x9175IML-PR Privacy set. Lever/knob x lever/knob interior mortise lock set. Sectional. P-926 w/9496ERC (ext) P-926 w/9497TPC (int)
CS-F926-8x9200IML-PR Privacy set. Lever/knob x lever/knob interior mortise lock set. Sectional. P-926 w/9494ERC (ext) P-926 w/9495TPC (int)
CS-F926-8x9225IML-PR Privacy set. Lever/knob x lever/knob interior mortise lock set. Sectional. P-926 w/9492ERC (ext) P-926 w/9493TPC (int)
TS-F926-8x9158IML-PR Privacy set. Lever/knob x lever/knob interior mortise lock set. Sectional. P-926 w/9157ERC (ext) P-926 w/9158TPC (int)
TS-F926-8x9175IML-PR Privacy set. Lever/knob x lever/knob interior mortise lock set. Sectional. P-926 w/9496ERC (ext) P-926 w/9497TPC (int)
TS-F926-8x9200IML-PR Privacy set. Lever/knob x lever/knob interior mortise lock set. Sectional. P-926 w/9494ERC (ext) P-926 w/9495TPC (int)
TS-F926-8x9225IML-PR Privacy set. Lever/knob x lever/knob interior mortise lock set. Sectional. P-926 w/9492ERC (ext) P-926 w/9493TPC (int)
Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m
PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.
14-47
Revised 02/08/16
Illustrations are for demonstration purposes only. Any knob, lever or ring pull can be combined with any style or size escutcheon plate.
RP926-8 CONTEMPORARY SECTIONAL INTERIOR MORTISE SETS
Complete sets with interior mortise lock and spindle. IML dummy trim screws are horizontal unless specified vertical (no charge).
Trim sets for interior mortise locks with spindle, no lock included. IML dummy trim screws are horizontal unless specified vertical (no charge).
TS-RP926-8IML-FD – Trim set only. – Full dummy.
2 1/2"
2 1/
2"
2 1/2"
2 1/
2"
CS-RP926-8IML – Complete passage set with interior
mortise lock and spindle. OR TS-RP926-8IML – Trim set only. No lock.
TS-RP926-8IML-HD – Trim set only. – Full dummy.
2 1/2"2 1/2"
2 1/
2"
2 1/2"
2 1/2” or 2 3/4” backset standard.Custom backsets available. Call for options and pricing.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.Note: Thru-bolt only.
Specify manufacturer & function of interior mortise lock.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.Note: Thru-bolt only.
CS-RP926-8IML Passage set. Lever/knob x lever/knob interior mortise lock set. Sectional. RP-926 (ext) RP-926 (int)
TS-RP926-8IML-FD Full dummy set. Lever/knob x lever/knob interior mortise lock set. Sectional. RP-926D (ext) RP-926D (int)
TS-RP926-8IML-HD Half dummy set. Lever/knob interior mortise lock set. Sectional. RP-926D
TS-RP926-8IML Passage set. Lever/knob x lever/knob interior mortise lock set. Sectional. RP-926 (ext) RP-926 (int)
TS-RP926-8IML-FD Full dummy set. Lever/knob x lever/knob interior mortise lock set. Sectional. RP-926D (ext) RP-926D (int)
TS-RP926-8IML-HD Half dummy set. Lever/knob interior mortise lock set. Sectional. RP-926D
Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m
PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.
14-48
Revised 02/08/16
Illustrations are for demonstration purposes only. Any knob, lever or ring pull can be combined with any style or size escutcheon plate.
RP926-8 CONTEMPORARY SECTIONAL INTERIOR MORTISE SETS
Complete sets with interior mortise lock and spindle. IML dummy trim screws are horizontal unless specified vertical (no charge).2 7/8” center-to-center.
Trim sets for interior mortise locks with spindle, no lock included. IML dummy trim screws are horizontal unless specified vertical (no charge). 2 7/8” center-to-center.
CS-RP926-8xRP9175IML-PR – Complete privacy set with interior
mortise lock and spindle. OR TS-RP926-8xRP9175IML-PR – Trim set only. No lock.
CS-RP926-8xRP9200IML-PR – Complete privacy set with interior
mortise lock and spindle. OR TS-RP926-8xRP9200IML-PR – Trim set only. No lock.
CS-RP926-8xRP9225IML-PR – Complete privacy set with interior
mortise lock and spindle. OR
TS-RP926-8xRP9225IML-PR – Trim set only. No lock.
2 1/
2"
2 1/
2"
2 1/
2"
2"1 3/4"1 3/4"
CS-RP926-8xRP9158IML-PR – Complete privacy set with interior
mortise lock and spindle. OR TS-RP926-8xRP9158IML-PR – Trim set only. No lock.
2 1/
2"1 5/8"1 5/8"
2 7/
8"
2 7/
8"
2 7/
8"
2 7/
8"
2 1/4"2" 2 1/4"
9/16
"
11/1
6"
3/4"
7/16
"
2 1/2” or 2 3/4” backset standard.Custom backsets available. Call for options and pricing.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.Note: Thru-bolt only.
Specify manufacturer & function of interior mortise lock.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.Note: Thru-bolt only.
CS-RP926-8xRP9158IML-PR Privacy set. Lever/knob x lever/knob interior mortise lock set. Sectional. RP-926 w/RP-9157ERC (ext) RP-926 w/RP-9158TPC (int)
CS-RP926-8xRP9175IML-PR Privacy set. Lever/knob x lever/knob interior mortise lock set. Sectional. RP-926 w/RP-9498ERC (ext) RP-926 w/RP-9499TPC (int)
CS-RP926-8xRP9200IML-PR Privacy set. Lever/knob x lever/knob interior mortise lock set. Sectional. RP-926 w/RP-9494ERC (ext) RP-926 w/RP-9495TPC (int)
CS-RP926-8xRP9225IML-PR Privacy set. Lever/knob x lever/knob interior mortise lock set. Sectional. RP-926 w/RP-9490ERC (ext) RP-926 w/RP-9491TPC (int)
TS-RP926-8xRP9158IML-PR Privacy set. Lever/knob x lever/knob interior mortise lock set. Sectional. RP-926 w/RP-9157ERC (ext) RP-926 w/RP-9158TPC (int)
TS-RP926-8xRP9175IML-PR Privacy set. Lever/knob x lever/knob interior mortise lock set. Sectional. RP-926 w/RP-9498ERC (ext) RP-926 w/RP-9499TPC (int)
TS-RP926-8xRP9200IML-PR Privacy set. Lever/knob x lever/knob interior mortise lock set. Sectional. RP-926 w/RP-9494ERC (ext) RP-926 w/RP-9495TPC (int)
TS-RP926-8xRP9225IML-PR Privacy set. Lever/knob x lever/knob interior mortise lock set. Sectional. RP-926 w/RP-9490ERC (ext) RP-926 w/RP-9491TPC (int)
Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m
PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.
14-49
Revised 02/08/16
Illustrations are for demonstration purposes only. Any knob, lever or ring pull can be combined with any style or size escutcheon plate.
F-RP926-8 CONTEMPORARY SECTIONAL INTERIOR MORTISE SETS
Complete sets with interior mortise lock and spindle. IML dummy trim screws are horizontal unless specified vertical (no charge).
Trim sets for interior mortise locks with spindle, no lock included. IML dummy trim screws are horizontal unless specified vertical (no charge).
TS-F-RP926-8IML-FD – Trim set only. – Full dummy.
2 1/2"
2 1/
2"
2 1/2"
2 1/
2"
CS-F-RP926-8IML – Complete passage set with interior
mortise lock and spindle. OR TS-F-RP926-8IML – Trim set only. No lock.
TS-F-RP926-8IML-HD – Trim set only. – Full dummy.
2 1/2"2 1/2"
2 1/
2"
2 1/2"
2 1/2” or 2 3/4” backset standard.Custom backsets available. Call for options and pricing.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.Note: Thru-bolt only.
Specify manufacturer & function of interior mortise lock.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.Note: Thru-bolt only.
CS-F-RP926-8IML Passage set. Lever/knob x lever/knob interior mortise lock set. Sectional. RP-926 (ext) RP-926 (int)
TS-F-RP926-8IML-FD Full dummy set. Lever/knob x lever/knob interior mortise lock set. Sectional. RP-926D (ext) RP-926D (int)
TS-F-RP926-8IML-HD Half dummy set. Lever/knob interior mortise lock set. Sectional. RP-926D
TS-F-RP926-8IML Passage set. Lever/knob x lever/knob interior mortise lock set. Sectional. RP-926 (ext) RP-926 (int)
TS-F-RP926-8IML-FD Full dummy set. Lever/knob x lever/knob interior mortise lock set. Sectional. RP-926D (ext) RP-926D (int)
TS-F-RP926-8IML-HD Half dummy set. Lever/knob interior mortise lock set. Sectional. RP-926D
Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m
PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.
14-50
Revised 02/08/16
Illustrations are for demonstration purposes only. Any knob, lever or ring pull can be combined with any style or size escutcheon plate.
F-RP926-8 CONTEMPORARY SECTIONAL INTERIOR MORTISE SETS
Complete sets with interior mortise lock and spindle. IML dummy trim screws are horizontal unless specified vertical (no charge).2 7/8” center-to-center.
Trim sets for interior mortise locks with spindle, no lock included. IML dummy trim screws are horizontal unless specified vertical (no charge). 2 7/8” center-to-center.
CS-F-RP926-8xRP9175IML-PR – Complete privacy set with interior
mortise lock and spindle. OR TS-F-RP926-8xRP9175IML-PR – Trim set only. No lock.
CS-F-RP926-8xRP9200IML-PR – Complete privacy set with interior
mortise lock and spindle. OR TS-F-RP926-8xRP9200IML-PR – Trim set only. No lock.
CS-F-RP926-8xRP9225IML-PR – Trim set only. – Full dummy.
OR TS-F-RP926-8xRP9225IML-PR – Trim set only.
2 1/
2"
2 1/
2"
CS-F-RP926-8xRP9158IML-PR – Complete privacy set with interior
mortise lock and spindle. OR TS-F-RP926-8xRP9158IML-PR – Trim set only. No lock.
2"1 3/4"1 3/4"
2 1/
2"
1 5/8"1 5/8"
2 7/
8" 2 1/
2"
2 1/4"
2 7/
8"
2 7/
8"
2 7/
8"
2" 2 1/4"
9/16
"
11/1
6"
3/4"
7/16
"
2 1/2" 2 1/2" 2 1/2" 2 1/2" 2 1/2" 2 1/2" 2 1/2" 2 1/2"
2 1/2” or 2 3/4” backset standard.Custom backsets available. Call for options and pricing.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.Note: Thru-bolt only.
Specify manufacturer & function of interior mortise lock.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.Note: Thru-bolt only.
CS-F-RP926-8xRP9158IML-PR Privacy set. Lever/knob x lever/knob interior mortise lock set. Sectional. RP-926 w/RP-9157ERC (ext) RP-926 w/RP-9158TPC (int)
CS-F-RP926-8xRP9175IML-PR Privacy set. Lever/knob x lever/knob interior mortise lock set. Sectional. RP-926 w/RP-9498ERC (ext) RP-926 w/RP-9499TPC (int)
CS-F-RP926-8xRP9200IML-PR Privacy set. Lever/knob x lever/knob interior mortise lock set. Sectional. RP-926 w/RP-9494ERC (ext) RP-926 w/RP-9495TPC (int)
CS-F-RP926-8xRP9225IML-PR Privacy set. Lever/knob x lever/knob interior mortise lock set. Sectional. RP-926 w/RP-9490ERC (ext) RP-926 w/RP-9491TPC (int)
TS-F-RP926-8xRP9158IML-PR Privacy set. Lever/knob x lever/knob interior mortise lock set. Sectional. RP-926 w/RP-9157ERC (ext) RP-926 w/RP-9158TPC (int)
TS-F-RP926-8xRP9175IML-PR Privacy set. Lever/knob x lever/knob interior mortise lock set. Sectional. RP-926 w/RP-9498ERC (ext) RP-926 w/RP-9499TPC (int)
TS-F-RP926-8xRP9200IML-PR Privacy set. Lever/knob x lever/knob interior mortise lock set. Sectional. RP-926 w/RP-9494ERC (ext) RP-926 w/RP-9495TPC (int)
TS-F-RP926-8xRP9225IML-PR Privacy set. Lever/knob x lever/knob interior mortise lock set. Sectional. RP-926 w/RP-9490ERC (ext) RP-926 w/RP-9491TPC (int)
Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m
PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.
14-51
Revised 02/08/16
Illustrations are for demonstration purposes only. Any knob, lever or ring pull can be combined with any style or size escutcheon plate.
N925 NOVUS SECTIONAL INTERIOR MORTISE SETS
Complete sets with interior mortise lock and spindle. IML dummy trim screws are horizontal unless specified vertical (no charge).2 1/4” center-to-center.
Trim sets for interior mortise locks with spindle, no lock included. IML dummy trim screws are horizontal unless specified vertical (no charge). 2 1/4” center-to-center.
2 1/2” or 2 3/4” backset standard.Custom backsets available. Call for options and pricing.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.Note: Thru-bolt only.
Specify manufacturer & function of interior mortise lock.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.Note: Thru-bolt only.
CS-N925IML – Complete passage set with interior
mortise lock and spindle. OR TS-N925IML – Trim set only. No lock.
CS-N925IML-PR – Complete privacy set with interior
mortise lock and spindle. OR TS-N925IML-PR – Trim set only. No lock.
CS-N925IML-PR-RC – Complete privacy set with interior
mortise lock and spindle. OR TS-N25IML-PR-RC – Trim set only. No lock.
TS-N925IML-HD – Trim set only. – Half dummy.
1 5/8"1 5/8"
2 1/
4"
1 5/8"
2 1/
4"
2 1/4"
2 1/
4" 2 1/
4"
2 1/
4"
2 1/4"2 1/4"
TS-N925IML-FD – Trim set only. – Full dummy.
2 1/
4"
2 1/4"2 1/4"
2 1/
4"
1/4"
3/4"
1"
CS-N925IML Passage set. Lever/knob x lever/knob interior mortise lock set. Sectional. P-N925 (ext) P-N925 (int)
CS-N925IML-PR Privacy set. Lever/knob x lever/knob interior mortise lock set. Sectional. P-N925 w/9157ERC (ext) P-N925 w/9158TPC (int)
CS-N925IML-PR-RC Privacy set. Lever/knob x lever/knob interior mortise lock set. Sectional. P-N925 w/RC-9 (ext) P-N925 w/9158TPC (int)
TS-N925IML-FD Full dummy set. Lever/knob x lever/knob interior mortise lock set. Sectional. P-N925D (ext) P-N925D (int)
TS-N925IML-HD Half dummy set. Lever/knob interior mortise lock set. Sectional. P-N925D
TS-N925IML Passage set. Lever/knob x lever/knob interior mortise lock set. Sectional. P-N925 (ext) P-N925 (int)
TS-N925IML-PR Privacy set. Lever/knob x lever/knob interior mortise lock set. Sectional. P-N925 w/9157ERC (ext) P-N925 w/9158TPC (int)
TS-N925IML-PR-RC Privacy set. Lever/knob x lever/knob interior mortise lock set. Sectional. P-N925 w/RC-9 (ext) P-N925 w/9158TPC (int)
TS-N925IML-FD Full dummy set. Lever/knob x lever/knob interior mortise lock set. Sectional. P-N925D (ext) P-N925D (int)
TS-N925IML-HD Half dummy set. Lever/knob interior mortise lock set. Sectional. P-N925D
Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m
PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.
14-52
Revised 02/08/16
Illustrations are for demonstration purposes only. Any knob, lever or ring pull can be combined with any style or size escutcheon plate.
RP-N925 NOVUS SECTIONAL INTERIOR MORTISE SETS
Complete sets with interior mortise lock and spindle. IML dummy trim screws are horizontal unless specified vertical (no charge).2 1/4” center-to-center.
Trim sets for interior mortise locks with spindle, no lock included. IML dummy trim screws are horizontal unless specified vertical (no charge). 2 1/4” center-to-center.
2 1/2” or 2 3/4” backset standard.Custom backsets available. Call for options and pricing.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.Note: Thru-bolt only.
Specify manufacturer & function of interior mortise lock.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.Note: Thru-bolt only.
CS-RP-N925IML – Complete passage set with interior
mortise lock and spindle. OR TS-RP-N925IML – Trim set only. No lock.
CS-RP-N925IML-PR – Complete privacy set with interior
mortise lock and spindle. OR TS-RP-N925IML-PR – Trim set only. No lock.
CS-RP-N925IML-PR-RC – Complete privacy set with interior
mortise lock and spindle. OR TS-RP-N925IML-PR-RC – Trim set only. No lock.
TS-RP-N925IML-FD – Trim set only. – Full dummy.
2 1/
4"
2 1/
4"
2 1/
4"
2 1/4"2 1/4"
1 5/8"
2 1/
4"
2 1/4"2 1/4"
TS-RP-N925IML-HD – Trim set only. – Half dummy.
2 1/
4"
2 1/4"
1 5/8"
2 1/
4"
1 5/8"
2 1/
4"
1/4"
3/4"
1"
CS-RP-N925IML Passage set. Lever/knob x lever/knob interior mortise lock set. Sectional. RP-N925 (ext) RP-N925 (int)
CS-RP-N925IML-PR Privacy set. Lever/knob x lever/knob interior mortise lock set. Sectional. RP-N925 w/RP-9157ERC (ext) RP-N925 w/RP-9158TPC (int)
CS-RP-N925IML-PR-RC Privacy set. Lever/knob x lever/knob interior mortise lock set. Sectional. RP-N925 w/RC-9 (ext) RP-N925w/RP-9158TPC (int)
TS-RP-N925IML-FD Full dummy set. Lever/knob x lever/knob interior mortise lock set. Sectional. RP-N925D (ext) RP-N925D (int)
TS-RP-N925IML-HD Half dummy set. Lever/knob interior mortise lock set. Sectional. RP-N925D
TS-RP-N925IML Passage set. Lever/knob x lever/knob interior mortise lock set. Sectional. RP-N925 (ext) RP-N925 (int)
TS-RP-N925IML-PR Privacy set. Lever/knob x lever/knob interior mortise lock set. Sectional. RP-N925 w/RP-9157ERC (ext) RP-N925 w/RP-9158TPC (int)
TS-RP-N925IML-PR-RC Privacy set. Lever/knob x lever/knob interior mortise lock set. Sectional. RP-N925 w/RC-9 (ext) RP-N925 w/RP-9158TPC (int)
TS-RP-N925IML-FD Full dummy set. Lever/knob x lever/knob interior mortise lock set. Sectional. RP-N925D (ext) RP-N925D (int)
TS-RP-N925IML-HD Half dummy set. Lever/knob interior mortise lock set. Sectional. RP-N925D
Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m
PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.
14-53
Revised 02/08/16
Illustrations are for demonstration purposes only. Any knob, lever or ring pull can be combined with any style or size escutcheon plate.
F-N925 NOVUS SECTIONAL INTERIOR MORTISE SETS
Complete sets with interior mortise lock and spindle. IML dummy trim screws are horizontal unless specified vertical (no charge).2 1/4” center-to-center.
Trim sets for interior mortise locks with spindle, no lock included. IML dummy trim screws are horizontal unless specified vertical (no charge). 2 1/4” center-to-center.
2 1/2” or 2 3/4” backset standard.Custom backsets available. Call for options and pricing.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.Note: Thru-bolt only.
Specify manufacturer & function of interior mortise lock.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.Note: Thru-bolt only.
CS-F-N925IML – Complete passage set with interior
mortise lock and spindle. OR TS-F-N925IML – Trim set only. No lock.
CS-F-N925IML-PR – Complete privacy set with interior
mortise lock and spindle. OR TS-F-N925IML-PR – Trim set only. No lock.
CS-F-N925IML-PR-RC – Complete privacy set with interior
mortise lock and spindle. OR TS-F-N925IML-PR-RC – Trim set only. No lock.
TS-F-N925IML-HD – Trim set only. – Half dummy.
1 5/8"1 5/8"
2 1/
4"
1 5/8"
2 1/
4"
2 1/4"
2 1/
4"
2 1/
4"2 1/
4"
2 1/4"2 1/4"
TS-F-N925IML-FD – Trim set only. – Full dummy.
2 1/
4"
2 1/4"2 1/4"
2 1/
4"
1/4"
3/4"
1"
2 1/4"2 1/4" 2 1/4"2 1/4"
CS-F-N925IML Passage set. Lever/knob x lever/knob interior mortise lock set. Sectional. P-N925 (ext) P-N925 (int)
CS-F-N925IML-PR Privacy set. Lever/knob x lever/knob interior mortise lock set. Sectional. P-N925 w/9157ERC (ext) P-N925 w/9158TPC (int)
CS-F-N925IML-PR-RC Privacy set. Lever/knob x lever/knob interior mortise lock set. Sectional. P-N925 w/RC-9 (ext) P-N925 w/9158TPC (int)
TS-F-N925IML-FD Full dummy set. Lever/knob x lever/knob interior mortise lock set. Sectional. P-N925D (ext) P-N925D (int)
TS-F-N925IML-HD Half dummy set. Lever/knob interior mortise lock set. Sectional. P-N925D
TS-F-N925IML Passage set. Lever/knob x lever/knob interior mortise lock set. Sectional. P-N925 (ext) P-N925 (int)
TS-F-N925IML-PR Privacy set. Lever/knob x lever/knob interior mortise lock set. Sectional. P-N925 w/9157ERC (ext) P-N925 w/9158TPC (int)
TS-F-N925IML-PR-RC Privacy set. Lever/knob x lever/knob interior mortise lock set. Sectional. P-N925 w/RC-9 (ext) P-N925 w/9158TPC (int)
TS-F-N925IML-FD Full dummy set. Lever/knob x lever/knob interior mortise lock set. Sectional. P-N925D (ext) P-N925D (int)
TS-F-N925IML-HD Half dummy set. Lever/knob interior mortise lock set. Sectional. P-N925D
Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m
PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.
14-54
Revised 02/08/16
Illustrations are for demonstration purposes only. Any knob, lever or ring pull can be combined with any style or size escutcheon plate.
F-RP-N925 NOVUS SECTIONAL INTERIOR MORTISE SETS
Complete sets with interior mortise lock and spindle. IML dummy trim screws are horizontal unless specified vertical (no charge).2 1/4” center-to-center.
Trim sets for interior mortise locks with spindle, no lock included. IML dummy trim screws are horizontal unless specified vertical (no charge). 2 1/4” center-to-center.
2 1/2” or 2 3/4” backset standard.Custom backsets available. Call for options and pricing.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.Note: Thru-bolt only.
Specify manufacturer & function of interior mortise lock.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.Note: Thru-bolt only.
CS-F-RP-N925IML – Complete passage set with interior
mortise lock and spindle. OR TS-F-RP-N925IML – Trim set only. No lock.
CS-F-RP-N925IML-PR – Complete privacy set with interior
mortise lock and spindle. OR TS-F-RP-N925IML-PR – Trim set only. No lock.
CS-F-RP-N925IML-PR-RC – Complete privacy set with interior
mortise lock and spindle. OR TS-F-RP-N925IML-PR-RC – Trim set only. No lock.
TS-F-RP-N925IML-FD – Trim set only. – Full dummy.
2 1/
4"
2 1/
4"
2 1/
4"
2 1/4"2 1/4"
1 5/8"
2 1/
4"
2 1/4"2 1/4"
TS-F-RP-N925IML-HD – Trim set only. – Half dummy.
2 1/
4"
2 1/4"
1 5/8"
2 1/
4"
1 5/8"
2 1/
4"
2 1/4"2 1/4" 2 1/4"2 1/4"
1/4"
1"
3/4"
CS-F-RP-N925IML Passage set. Lever/knob x lever/knob interior mortise lock set. Sectional. RP-N925 (ext) RP-N925 (int)
CS-F-RP-N925IML-PR Privacy set. Lever/knob x lever/knob interior mortise lock set. Sectional. RP-N925 w/RP-9157ERC (ext) RP-N925 w/RP-9158TPC (int)
CS-F-RP-N925IML-PR-RC Privacy set. Lever/knob x lever/knob interior mortise lock set. Sectional. RP-N925 w/RC-9 (ext) RP-N925w/RP-9158TPC (int)
TS-F-RP-N925IML-FD Full dummy set. Lever/knob x lever/knob interior mortise lock set. Sectional. RP-N925D (ext) RP-N925D (int)
TS-F-RP-N925IML-HD Half dummy set. Lever/knob interior mortise lock set. Sectional. RP-N925D
TS-F-RP-N925IML Passage set. Lever/knob x lever/knob interior mortise lock set. Sectional. RP-N925 (ext) RP-N925 (int)
TS-F-RP-N925IML-PR Privacy set. Lever/knob x lever/knob interior mortise lock set. Sectional. RP-N925 w/RP-9157ERC (ext) RP-N925 w/RP-9158TPC (int)
TS-F-RP-N925IML-PR-RC Privacy set. Lever/knob x lever/knob interior mortise lock set. Sectional. RP-N925 w/RC-9 (ext) RP-N925 w/RP-9158TPC (int)
TS-F-RP-N925IML-FD Full dummy set. Lever/knob x lever/knob interior mortise lock set. Sectional. RP-N925D (ext) RP-N925D (int)
TS-F-RP-N925IML-HD Half dummy set. Lever/knob interior mortise lock set. Sectional. RP-N925D
Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m
PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.
14-55
Revised 02/08/16
Illustrations are for demonstration purposes only. Any knob, lever or ring pull can be combined with any style or size escutcheon plate.
N926 NOVUS SECTIONAL INTERIOR MORTISE SETS
Complete sets with interior mortise lock and spindle. IML dummy trim screws are horizontal unless specified vertical (no charge).2 1/4” center-to-center.
Trim sets for interior mortise locks with spindle, no lock included. IML dummy trim screws are horizontal unless specified vertical (no charge). 2 1/4” center-to-center.
2 1/2” or 2 3/4” backset standard.Custom backsets available. Call for options and pricing.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.Note: Thru-bolt only.
Specify manufacturer & function of interior mortise lock.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.Note: Thru-bolt only.
CS-N926IML – Complete passage set with interior
mortise lock and spindle. OR TS-N926IML – Trim set only. No lock.
CS-N926IML-PR – Complete privacy set with interior
mortise lock and spindle. OR TS-N926IML-PR – Trim set only. No lock.
CS-N926IML-PR-RC – Complete privacy set with interior
mortise lock and spindle. OR TS-N926IML-PR-RC – Trim set only. No lock.
TS-N926IML-FD – Trim set only. – Full dummy.
2 1/
2"
2 1/2"2 1/2"
2 1/
2"
2 1/
2"
1 5/8"
TS-N926IML-HD – Trim set only. – Full dummy.
2 1/
2"
2 1/2"
2 1/
2"
2 1/2"2 1/2"
1 5/8"1 5/8"
2 1/
4"
1/8"
3/4"
1"
2 1/
4"
CS-N926IML Passage set. Lever/knob x lever/knob interior mortise lock set. Sectional. P-N926 (ext) P-N926 (int)
CS-N926IML-PR Privacy set. Lever/knob x lever/knob interior mortise lock set. Sectional. P-N926 w/9157ERC (ext) P-N926 w/9158TPC (int)
CS-N926IML-PR-RC Privacy set. Lever/knob x lever/knob interior mortise lock set. Sectional. P-N926 w/RC-9 (ext) P-N926 w/9158TPC (int)
TS-N926IML-FD Full dummy set. Lever/knob x lever/knob interior mortise lock set. Sectional. P-N926D (ext) P-N926D (int)
TS-N926IML-HD Half dummy set. Lever/knob interior mortise lock set. Sectional. P-N926D
TS-N926IML Passage set. Lever/knob x lever/knob interior mortise lock set. Sectional. P-N926 (ext) P-N926 (int)
TS-N926IML-PR Privacy set. Lever/knob x lever/knob interior mortise lock set. Sectional. P-N926 w/9157ERC (ext) P-N926 w/9158TPC (int)
TS-N926IML-PR-RC Privacy set. Lever/knob x lever/knob interior mortise lock set. Sectional. P-N926 w/RC-9 (ext) P-N926 w/9158TPC (int)
TS-N926IML-FD Full dummy set. Lever/knob x lever/knob interior mortise lock set. Sectional. P-N926D (ext) P-N926D (int)
TS-N926IML-HD Half dummy set. Lever/knob interior mortise lock set. Sectional. P-N926D
Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m
PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.
14-56
Revised 02/08/16
Illustrations are for demonstration purposes only. Any knob, lever or ring pull can be combined with any style or size escutcheon plate.
RP-N926 NOVUS SECTIONAL INTERIOR MORTISE SETS
Complete sets with interior mortise lock and spindle. IML dummy trim screws are horizontal unless specified vertical (no charge).2 1/4” center-to-center.
Trim sets for interior mortise locks with spindle, no lock included. IML dummy trim screws are horizontal unless specified vertical (no charge). 2 1/4” center-to-center.
2 1/2” or 2 3/4” backset standard.Custom backsets available. Call for options and pricing.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.Note: Thru-bolt only.
Specify manufacturer & function of interior mortise lock.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.Note: Thru-bolt only.
CS-RP-N926IML-PR – Complete privacy set with interior
mortise lock and spindle. OR TS-RP-N926IML-PR – Trim set only. No lock.
CS-RP-N926IML-PR-RC – Complete privacy set with interior
mortise lock and spindle. OR TS-RP-N926IML-PR-RC – Trim set only. No lock.
TS-RP-N926IML-FD – Trim set only. – Full dummy.
2 1/2"
2 1/
2"
2 1/2"
2 1/
2"
2 1/
2"
2 1/
2"
CS-RP-N926IML – Complete passage set with interior
mortise lock and spindle. OR TS-RP-N926IML – Trim set only. No lock.
TS-RP-N926IML-HD – Trim set only. – Full dummy.
2 1/2"2 1/2"
2 1/
2"
2 1/2"
1 5/8"1 5/8"1 5/8"
2 1/
4"
2 1/
4"
1/8"
3/4"
1"
CS-RP-N926IML Passage set. Lever/knob x lever/knob interior mortise lock set. Sectional. RP-N926 (ext) RP-N926 (int)
CS-RP-N926IML-PR Privacy set. Lever/knob x lever/knob interior mortise lock set. Sectional. RP-N926 w/RP-9157ERC (ext) RP-N926 w/RP-9158TPC (int)
CS-RP-N926IML-PR-RC Privacy set. Lever/knob x lever/knob interior mortise lock set. Sectional. RP-N926 w/RC-9 (ext) RP-N926 w/RP-9158TPC (int)
TS-RP-N926IML-FD Full dummy set. Lever/knob x lever/knob interior mortise lock set. Sectional. RP-N926D (ext) RP-N926D (int)
TS-RP-N926IML-HD Half dummy set. Lever/knob interior mortise lock set. Sectional. RP-N926D
TS-RP-N926IML Passage set. Lever/knob x lever/knob interior mortise lock set. Sectional. RP-N926 (ext) RP-N926 (int)
TS-RP-N926IML-PR Privacy set. Lever/knob x lever/knob interior mortise lock set. Sectional. RP-N926 w/RP-9157ERC (ext) RP-N926 w/RP-9158TPC (int)
TS-RP-N926IML-PR-RC Privacy set. Lever/knob x lever/knob interior mortise lock set. Sectional. RP-N926 w/RC-9 (ext) RP-N926 w/RP-9158TPC (int)
TS-RP-N926IML-FD Full dummy set. Lever/knob x lever/knob interior mortise lock set. Sectional. RP-N926D (ext) RP-N926D (int)
TS-RP-N926IML-HD Half dummy set. Lever/knob interior mortise lock set. Sectional. RP-N926D
Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m
PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.
14-57
Revised 02/08/16
Illustrations are for demonstration purposes only. Any knob, lever or ring pull can be combined with any style or size escutcheon plate.
F-N926 NOVUS SECTIONAL INTERIOR MORTISE SETS
Complete sets with interior mortise lock and spindle. IML dummy trim screws are horizontal unless specified vertical (no charge).2 1/4” center-to-center.
Trim sets for interior mortise locks with spindle, no lock included. IML dummy trim screws are horizontal unless specified vertical (no charge). 2 1/4” center-to-center.
2 1/2” or 2 3/4” backset standard.Custom backsets available. Call for options and pricing.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.Note: Thru-bolt only.
Specify manufacturer & function of interior mortise lock.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.Note: Thru-bolt only.
CS-F-N926IML – Complete passage set with interior
mortise lock and spindle. OR TS-F-N926IML – Trim set only. No lock.
CS-F-N926IML-PR – Complete privacy set with interior
mortise lock and spindle. OR TS-F-N926IML-PR – Trim set only. No lock.
CS-F-N926IML-PR-RC – Complete privacy set with interior
mortise lock and spindle. OR TS-F-N926IML-PR-RC – Trim set only. No lock.
TS-F-N926IML-FD – Trim set only. – Full dummy.
2 1/
2"
2 1/2"2 1/2"
2 1/
2"
2 1/
2"
1 5/8"
TS-F-N926IML-HD – Trim set only. – Full dummy.
2 1/
2"
2 1/2"
2 1/
2"
2 1/2"2 1/2"
1 5/8"1 5/8"
2 1/
4"
1/8"
3/4"
1" 2 1/
4"
2 1/2"2 1/2" 2 1/2"2 1/2"
CS-F-N926IML Passage set. Lever/knob x lever/knob interior mortise lock set. Sectional. P-N926 (ext) P-N926 (int)
CS-F-N926IML-PR Privacy set. Lever/knob x lever/knob interior mortise lock set. Sectional. P-N926 w/9157ERC (ext) P-N926 w/9158TPC (int)
CS-F-N926IML-PR-RC Privacy set. Lever/knob x lever/knob interior mortise lock set. Sectional. P-N926 w/RC-9 (ext) P-N926 w/9158TPC (int)
TS-F-N926IML-FD Full dummy set. Lever/knob x lever/knob interior mortise lock set. Sectional. P-N926D (ext) P-N926D (int)
TS-F-N926IML-HD Half dummy set. Lever/knob interior mortise lock set. Sectional. P-N926D
TS-F-N926IML Passage set. Lever/knob x lever/knob interior mortise lock set. Sectional. P-N926 (ext) P-N926 (int)
TS-F-N926IML-PR Privacy set. Lever/knob x lever/knob interior mortise lock set. Sectional. P-N926 w/9157ERC (ext) P-N926 w/9158TPC (int)
TS-F-N926IML-PR-RC Privacy set. Lever/knob x lever/knob interior mortise lock set. Sectional. P-N926 w/RC-9 (ext) P-N926 w/9158TPC (int)
TS-F-N926IML-FD Full dummy set. Lever/knob x lever/knob interior mortise lock set. Sectional. P-N926D (ext) P-N926D (int)
TS-F-N926IML-HD Half dummy set. Lever/knob interior mortise lock set. Sectional. P-N926D
Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m
PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.
14-58
Revised 02/08/16
Illustrations are for demonstration purposes only. Any knob, lever or ring pull can be combined with any style or size escutcheon plate.
F-RP-N926 NOVUS SECTIONAL INTERIOR MORTISE SETS
Complete sets with interior mortise lock and spindle. IML dummy trim screws are horizontal unless specified vertical (no charge).2 1/4” center-to-center.
Trim sets for interior mortise locks with spindle, no lock included. IML dummy trim screws are horizontal unless specified vertical (no charge). 2 1/4” center-to-center.
2 1/2” or 2 3/4” backset standard.Custom backsets available. Call for options and pricing.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.Note: Thru-bolt only.
Specify manufacturer & function of interior mortise lock.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.Note: Thru-bolt only.
CS-F-RP-N926IML-PR – Complete privacy set with interior
mortise lock and spindle. OR TS-F-RP-N926IML-PR – Trim set only. No lock.
CS-F-RP-N926IML-PR-RC – Complete privacy set with interior
mortise lock and spindle. OR TS-F-RP-N926IML-PR-RC – Trim set only. No lock.
TS-F-RP-N926IML-FD – Trim set only. – Full dummy.
2 1/2"
2 1/
2"
2 1/2"
2 1/
2"
2 1/
2"
2 1/
2"
CS-F-RP-N926IML – Complete passage set with interior
mortise lock and spindle. OR TS-F-RP-N926IML – Trim set only. No lock.
TS-F-RP-N926IML-HD – Trim set only. – Full dummy.
2 1/2"2 1/2"
2 1/
2"
2 1/2"
1 5/8"1 5/8"1 5/8"
2 1/
4"
2 1/
4"
2 1/2" 2 1/2" 2 1/2" 2 1/2"
1/8"
3/4"
1"
CS-F-RP-N926IML Passage set. Lever/knob x lever/knob interior mortise lock set. Sectional. RP-N926 (ext) RP-N926 (int)
CS-F-RP-N926IML-PR Privacy set. Lever/knob x lever/knob interior mortise lock set. Sectional. RP-N926 w/RP-9157ERC (ext) RP-N926 w/RP-9158TPC (int)
CS-F-RP-N926IML-PR-RC Privacy set. Lever/knob x lever/knob interior mortise lock set. Sectional. RP-N926 w/RC-9 (ext) RP-N926 w/RP-9158TPC (int)
TS-F-RP-N926IML-FD Full dummy set. Lever/knob x lever/knob interior mortise lock set. Sectional. RP-N926D (ext) RP-N926D (int)
TS-F-RP-N926IML-HD Half dummy set. Lever/knob interior mortise lock set. Sectional. RP-N926D
TS-F-RP-N926IML Passage set. Lever/knob x lever/knob interior mortise lock set. Sectional. RP-N926 (ext) RP-N926 (int)
TS-F-RP-N926IML-PR Privacy set. Lever/knob x lever/knob interior mortise lock set. Sectional. RP-N926 w/RP-9157ERC (ext) RP-N926 w/RP-9158TPC (int)
TS-F-RP-N926IML-PR-RC Privacy set. Lever/knob x lever/knob interior mortise lock set. Sectional. RP-N926 w/RC-9 (ext) RP-N926 w/RP-9158TPC (int)
TS-F-RP-N926IML-FD Full dummy set. Lever/knob x lever/knob interior mortise lock set. Sectional. RP-N926D (ext) RP-N926D (int)
TS-F-RP-N926IML-HD Half dummy set. Lever/knob interior mortise lock set. Sectional. RP-N926D
Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m
PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.
14-59
Revised 02/08/16
Illustrations are for demonstration purposes only. Any knob, lever or ring pull can be combined with any style or size escutcheon plate.
N925-8 NOVUS SECTIONAL INTERIOR MORTISE SETS
Complete sets with interior mortise lock and spindle. IML dummy trim screws are horizontal unless specified vertical (no charge).
Trim sets for interior mortise locks with spindle, no lock included. IML dummy trim screws are horizontal unless specified vertical (no charge).
2 1/2” or 2 3/4” backset standard.Custom backsets available. Call for options and pricing.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.Note: Thru-bolt only.
Specify manufacturer & function of interior mortise lock.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.Note: Thru-bolt only.
CS-N925-8IML – Complete passage set with interior
mortise lock and spindle. OR TS-N925-8IML – Trim set only. No lock.
TS-N925-8IML-HD – Trim set only. – Half dummy.
2 1/
4"
2 1/4"
2 1/
4"
2 1/4"2 1/4"
TS-N925-8IML-FD – Trim set only. – Full dummy.
2 1/
4"
2 1/4"2 1/4"
CS-N925-8IML Passage set. Lever/knob x lever/knob interior mortise lock set. Sectional. P-N925 (ext) P-N925 (int)
TS-N925-8IML-FD Full dummy set. Lever/knob x lever/knob interior mortise lock set. Sectional. P-N925D (ext) P-N925D (int)
TS-N925-8IML-HD Half dummy set. Lever/knob interior mortise lock set. Sectional. P-N925D
TS-N925-8IML Passage set. Lever/knob x lever/knob interior mortise lock set. Sectional. P-N925 (ext) P-N925 (int)
TS-N925-8IML-FD Full dummy set. Lever/knob x lever/knob interior mortise lock set. Sectional. P-N925D (ext) P-N925D (int)
TS-N925-8IML-HD Half dummy set. Lever/knob interior mortise lock set. Sectional. P-N925D
Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m
PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.
14-60
Revised 02/08/16
Illustrations are for demonstration purposes only. Any knob, lever or ring pull can be combined with any style or size escutcheon plate.
N925-8 NOVUS SECTIONAL INTERIOR MORTISE SETS
Complete sets with interior mortise lock and spindle. IML dummy trim screws are horizontal unless specified vertical (no charge).2 7/8” center-to-center.
Trim sets for interior mortise locks with spindle, no lock included. IML dummy trim screws are horizontal unless specified vertical (no charge). 2 7/8” center-to-center.
2 1/2” or 2 3/4” backset standard.Custom backsets available. Call for options and pricing.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.Note: Thru-bolt only.
Specify manufacturer & function of interior mortise lock.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.Note: Thru-bolt only.
CS-N925-8x9158IML-PR – Complete privacy set with interior
mortise lock and spindle. OR TS-N925-8x9158IML-PR – Trim set only. No lock.
CS-N925-8x9175IML-PR – Complete privacy set with interior
mortise lock and spindle. OR TS-N925-8x9175IML-PR – Trim set only. No lock.
CS-N925-8x9200IML-PR – Complete privacy set with interior
mortise lock and spindle. OR TS-N925-8x9200IML-PR – Trim set only. No lock.
1 3/4"1 3/4"
2 1/
4"
2"
2 1/
4" 2 7/
8"
2 1/
4"
CS-N925-8x9225IML-PR – Complete privacy set with interior
mortise lock and spindle. OR
TS-N925-8x9225IML-PR – Trim set only. No lock.
2 1/
4"2 7/
8"
1 5/8"1 5/8"
2 7/
8"
2 7/
8"
2 1/4"2" 2 1/4"
11/1
6"
13/1
6"
7/8"
9/16
"
CS-N925-8x9158IML-PR Privacy set. Lever/knob x lever/knob interior mortise lock set. Sectional. P-N925 w/9157ERC (ext) P-N925 w/9158TPC (int)
CS-N925-8x9175IML-PR Privacy set. Lever/knob x lever/knob interior mortise lock set. Sectional. P-N925 w/9496ERC (ext) P-N925 w/9497TPC (int)
CS-N925-8x9200IML-PR Privacy set. Lever/knob x lever/knob interior mortise lock set. Sectional. P-N925 w/9494ERC (ext) P-N925 w/9495TPC (int)
CS-N925-8x9225IML-PR Privacy set. Lever/knob x lever/knob interior mortise lock set. Sectional. P-N925 w/9492ERC (ext) P-N925 w/9493TPC (int)
TS-N925-8x9158IML-PR Privacy set. Lever/knob x lever/knob interior mortise lock set. Sectional. P-N925 w/9157ERC (ext) P-N925 w/9158TPC (int)
TS-N925-8x9175IML-PR Privacy set. Lever/knob x lever/knob interior mortise lock set. Sectional. P-N925 w/9496ERC (ext) P-N925 w/9497TPC (int)
TS-N925-8x9200IML-PR Privacy set. Lever/knob x lever/knob interior mortise lock set. Sectional. P-N925 w/9494ERC (ext) P-N925 w/9495TPC (int)
TS-N925-8x9225IML-PR Privacy set. Lever/knob x lever/knob interior mortise lock set. Sectional. P-N925 w/9492ERC (ext) P-N925 w/9493TPC (int)
Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m
PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.
14-61
Revised 02/08/16
Illustrations are for demonstration purposes only. Any knob, lever or ring pull can be combined with any style or size escutcheon plate.
RP-N925-8 NOVUS SECTIONAL INTERIOR MORTISE SETS
Complete sets with interior mortise lock and spindle. IML dummy trim screws are horizontal unless specified vertical (no charge).
Trim sets for interior mortise locks with spindle, no lock included. IML dummy trim screws are horizontal unless specified vertical (no charge).
2 1/2” or 2 3/4” backset standard.Custom backsets available. Call for options and pricing.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.Note: Thru-bolt only.
Specify manufacturer & function of interior mortise lock.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.Note: Thru-bolt only.
CS-RP-N925-8IML – Complete passage set with interior
mortise lock and spindle. OR TS-RP-N925-8IML – Trim set only. No lock.
TS-RP-N925-8IML-FD – Trim set only. – Full dummy.
2 1/
4"
2 1/4"2 1/4"
2 1/
4"
2 1/4"2 1/4"
TS-RP-N925-8IML-HD – Trim set only. – Half dummy.
2 1/
4"
2 1/4"
CS-RP-N925-8IML Passage set. Lever/knob x lever/knob interior mortise lock set. Sectional. RP-N925 (ext) RP-N925 (int)
TS-RP-N925-8IML-FD Full dummy set. Lever/knob x lever/knob interior mortise lock set. Sectional. RP-N925D (ext) RP-N925D (int)
TS-RP-N925-8IML-HD Half dummy set. Lever/knob interior mortise lock set. Sectional. RP-N925D
TS-RP-N925-8IML Passage set. Lever/knob x lever/knob interior mortise lock set. Sectional. RP-N925 (ext) RP-N925 (int)
TS-RP-N925-8IML-FD Full dummy set. Lever/knob x lever/knob interior mortise lock set. Sectional. RP-N925D (ext) RP-N925D (int)
TS-RP-N925-8IML-HD Half dummy set. Lever/knob interior mortise lock set. Sectional. RP-N925D
Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m
PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.
14-62
Revised 02/08/16
Illustrations are for demonstration purposes only. Any knob, lever or ring pull can be combined with any style or size escutcheon plate.
RP-N925-8 NOVUS SECTIONAL INTERIOR MORTISE SETS
Complete sets with interior mortise lock and spindle. IML dummy trim screws are horizontal unless specified vertical (no charge).2 7/8” center-to-center.
Trim sets for interior mortise locks with spindle, no lock included. IML dummy trim screws are horizontal unless specified vertical (no charge). 2 7/8” center-to-center.
2 1/2” or 2 3/4” backset standard.Custom backsets available. Call for options and pricing.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.Note: Thru-bolt only.
Specify manufacturer & function of interior mortise lock.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.Note: Thru-bolt only.
CS-RP-N925-8xRP9175IML-PR – Complete privacy set with interior
mortise lock and spindle. OR TS-RP-N925-8xRP9175IML-PR – Trim set only. No lock.
CS-RP-N925-8xRP9200IML-PR – Complete privacy set with interior
mortise lock and spindle. OR TS-RP-N925-8xRP9200IML-PR – Trim set only. No lock.
CS-RP-N925-8xRP9225IML-PR – Complete privacy set with interior
mortise lock and spindle. OR TS-RP-N925-8xRP9225IML-PR – Trim set only. No lock.
CS-RP-N925-8xRP9158IML-PR – Complete privacy set with interior
mortise lock and spindle. OR TS-RP-N925-8xRP9158IML-PR – Trim set only. No lock.
2 1/
4"1 5/8"
2 7/
8"
1 5/8"
2 1/
4"
1 3/4"
2 7/
8"
1 3/4"
2 1/
4"
2"
2 7/
8"
2"
2 1/
4"
2 1/4"
2 7/
8"
2 1/4"
11/1
6"
13/1
6"
7/8"
9/16
"
CS-RP-N925-8xRP9158IML-PR Privacy set. Lever/knob x lever/knob interior mortise lock set. Sectional. RP-N925 w/RP-9157ERC (ext) RP-N925 w/RP-9158TPC (int)
CS-RP-N925-8xRP9175IML-PR Privacy set. Lever/knob x lever/knob interior mortise lock set. Sectional. RP-N925 w/RP-9498ERC (ext) RP-N925 w/RP-9499TPC (int)
CS-RP-N925-8xRP9200IML-PR Privacy set. Lever/knob x lever/knob interior mortise lock set. Sectional. RP-N925 w/RP-9494ERC (ext) RP-N925 w/RP-9495TPC (int)
CS-RP-N925-8xRP9225IML-PR Privacy set. Lever/knob x lever/knob interior mortise lock set. Sectional. RP-N925 w/RP-9490ERC (ext) RP-N925 w/RP-9491TPC (int)
TS-RP-N925-8xRP9158IML-PR Privacy set. Lever/knob x lever/knob interior mortise lock set. Sectional. RP-N925 w/RP-9157ERC (ext) RP-N925 w/RP-9158TPC (int)
TS-RP-N925-8xRP9175IML-PR Privacy set. Lever/knob x lever/knob interior mortise lock set. Sectional. RP-N925 w/RP-9498ERC (ext) RP-N925 w/RP-9499TPC (int)
TS-RP-N925-8xRP9200IML-PR Privacy set. Lever/knob x lever/knob interior mortise lock set. Sectional. RP-N925 w/RP-9494ERC (ext) RP-N925 w/RP-9495TPC (int)
TS-RP-N925-8xRP9225IML-PR Privacy set. Lever/knob x lever/knob interior mortise lock set. Sectional. RP-N925 w/RP-9490ERC (ext) RP-N925 w/RP-9491TPC (int)
Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m
PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.
14-63
Revised 02/08/16
Illustrations are for demonstration purposes only. Any knob, lever or ring pull can be combined with any style or size escutcheon plate.
F-N925-8 NOVUS SECTIONAL INTERIOR MORTISE SETS
Complete sets with interior mortise lock and spindle. IML dummy trim screws are horizontal unless specified vertical (no charge).
Trim sets for interior mortise locks with spindle, no lock included. IML dummy trim screws are horizontal unless specified vertical (no charge).
2 1/2” or 2 3/4” backset standard.Custom backsets available. Call for options and pricing.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.Note: Thru-bolt only.
Specify manufacturer & function of interior mortise lock.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.Note: Thru-bolt only.
CS-F-N925-8IML – Complete passage set with interior
mortise lock and spindle. OR TS-F-N925-8IML – Trim set only. No lock.
TS-F-N925-8IML-HD – Trim set only. – Half dummy.
2 1/
4"
2 1/4"
2 1/
4"
2 1/4"2 1/4"
TS-F-N925-8IML-FD – Trim set only. – Full dummy.
2 1/
4"
2 1/4"2 1/4"
CS-F-N925-8IML Passage set. Lever/knob x lever/knob interior mortise lock set. Sectional. P-N925 (ext) P-N925 (int)
TS-F-N925-8IML-FD Full dummy set. Lever/knob x lever/knob interior mortise lock set. Sectional. P-N925D (ext) P-N925D (int)
TS-F-N925-8IML-HD Half dummy set. Lever/knob interior mortise lock set. Sectional. P-N925D
TS-F-N925-8IML Passage set. Lever/knob x lever/knob interior mortise lock set. Sectional. P-N925 (ext) P-N925 (int)
TS-F-N925-8IML-FD Full dummy set. Lever/knob x lever/knob interior mortise lock set. Sectional. P-N925D (ext) P-N925D (int)
TS-F-N925-8IML-HD Half dummy set. Lever/knob interior mortise lock set. Sectional. P-N925D
Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m
PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.
14-64
Revised 02/08/16
Illustrations are for demonstration purposes only. Any knob, lever or ring pull can be combined with any style or size escutcheon plate.
F-N925-8 NOVUS SECTIONAL INTERIOR MORTISE SETS
Complete sets with interior mortise lock and spindle. IML dummy trim screws are horizontal unless specified vertical (no charge).2 7/8” center-to-center.
Trim sets for interior mortise locks with spindle, no lock included. IML dummy trim screws are horizontal unless specified vertical (no charge). 2 7/8” center-to-center.
2 1/2” or 2 3/4” backset standard.Custom backsets available. Call for options and pricing.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.Note: Thru-bolt only.
Specify manufacturer & function of interior mortise lock.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.Note: Thru-bolt only.
CS-F-N925-8x9158IML-PR – Complete privacy set with interior
mortise lock and spindle. OR TS-F-N925-8x9158IML-PR – Trim set only. No lock.
CS-F-N925-8x9175IML-PR – Complete privacy set with interior
mortise lock and spindle. OR TS-F-N925-8x9175IML-PR – Trim set only. No lock.
CS-F-N925-8x9200IML-PR – Complete privacy set with interior
mortise lock and spindle. OR TS-F-N925-8x9200IML-PR – Trim set only. No lock.
1 3/4"1 3/4"
2 1/
4"
2"
2 1/
4"
1 5/8"1 5/8"
2 1/
4"
2 7/
8"
2 1/4"2 1/4"
2 1/
4"
CS-F-N925-8x9225IML-PR – Complete privacy set with interior
mortise lock and spindle. OR TS-F-N925-8x9225IML-PR – Trim set only. No lock.
2 7/
8"
2 7/
8"
2 7/
8"
2"
11/1
6"
13/1
6"
7/8"
9/16
"
2 1/4"2 1/4"2 1/4"2 1/4"2 1/4"2 1/4"
2 1/4" 2 1/4"
CS-F-N925-8x9158IML-PR Privacy set. Lever/knob x lever/knob interior mortise lock set. Sectional. P-N925 w/9157ERC (ext) P-N925 w/9158TPC (int)
CS-F-N925-8x9175IML-PR Privacy set. Lever/knob x lever/knob interior mortise lock set. Sectional. P-N925 w/9496ERC (ext) P-N925 w/9497TPC (int)
CS-F-N925-8x9200IML-PR Privacy set. Lever/knob x lever/knob interior mortise lock set. Sectional. P-N925 w/9494ERC (ext) P-N925 w/9495TPC (int)
CS-F-N925-8x9225IML-PR Privacy set. Lever/knob x lever/knob interior mortise lock set. Sectional. P-N925 w/9492ERC (ext) P-N925 w/9493TPC (int)
TS-F-N925-8x9158IML-PR Privacy set. Lever/knob x lever/knob interior mortise lock set. Sectional. P-N925 w/9157ERC (ext) P-N925 w/9158TPC (int)
TS-F-N925-8x9175IML-PR Privacy set. Lever/knob x lever/knob interior mortise lock set. Sectional. P-N925 w/9496ERC (ext) P-N925 w/9497TPC (int)
TS-F-N925-8x9200IML-PR Privacy set. Lever/knob x lever/knob interior mortise lock set. Sectional. P-N925 w/9494ERC (ext) P-N925 w/9495TPC (int)
TS-F-N925-8x9225IML-PR Privacy set. Lever/knob x lever/knob interior mortise lock set. Sectional. P-N925 w/9492ERC (ext) P-N925 w/9493TPC (int)
Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m
PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.
14-65
Revised 02/08/16
Illustrations are for demonstration purposes only. Any knob, lever or ring pull can be combined with any style or size escutcheon plate.
F-RP-N925-8 NOVUS SECTIONAL INTERIOR MORTISE SETS
Complete sets with interior mortise lock and spindle. IML dummy trim screws are horizontal unless specified vertical (no charge).
Trim sets for interior mortise locks with spindle, no lock included. IML dummy trim screws are horizontal unless specified vertical (no charge).
2 1/2” or 2 3/4” backset standard.Custom backsets available. Call for options and pricing.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.Note: Thru-bolt only.
Specify manufacturer & function of interior mortise lock.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.Note: Thru-bolt only.
CS-F-RP-N925-8IML – Complete passage set with interior
mortise lock and spindle. OR TS-F-RP-N925-8IML – Trim set only. No lock.
TS-F-RP-N925-8IML-FD – Trim set only. – Full dummy.
2 1/
4"
2 1/4"2 1/4"
2 1/
4"
2 1/4"2 1/4"
TS-F-RP-N925-8IML-HD – Trim set only. – Half dummy.
2 1/
4"
2 1/4"
CS-F-RP-N925-8IML Passage set. Lever/knob x lever/knob interior mortise lock set. Sectional. RP-N925 (ext) RP-N925 (int)
TS-F-RP-N925-8IML-FD Full dummy set. Lever/knob x lever/knob interior mortise lock set. Sectional. RP-N925D (ext) RP-N925D (int)
TS-F-RP-N925-8IML-HD Half dummy set. Lever/knob interior mortise lock set. Sectional. RP-N925D
TS-F-RP-N925-8IML Passage set. Lever/knob x lever/knob interior mortise lock set. Sectional. RP-N925 (ext) RP-N925 (int)
TS-F-RP-N925-8IML-FD Full dummy set. Lever/knob x lever/knob interior mortise lock set. Sectional. RP-N925D (ext) RP-N925D (int)
TS-F-RP-N925-8IML-HD Half dummy set. Lever/knob interior mortise lock set. Sectional. RP-N925D
Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m
PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.
14-66
Revised 02/08/16
Illustrations are for demonstration purposes only. Any knob, lever or ring pull can be combined with any style or size escutcheon plate.
F-RP-N925-8 NOVUS SECTIONAL INTERIOR MORTISE SETS
Complete sets with interior mortise lock and spindle. IML dummy trim screws are horizontal unless specified vertical (no charge).2 7/8” center-to-center.
Trim sets for interior mortise locks with spindle, no lock included. IML dummy trim screws are horizontal unless specified vertical (no charge). 2 7/8” center-to-center.
2 1/2” or 2 3/4” backset standard.Custom backsets available. Call for options and pricing.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.Note: Thru-bolt only.
Specify manufacturer & function of interior mortise lock.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.Note: Thru-bolt only.
CS-F-RP-N925-8IML – Complete passage set with interior
mortise lock and spindle. OR TS-F-RP-N925-8IML – Trim set only. No lock.
TS-F-RP-N925-8IML-FD – Trim set only. – Full dummy.
2 1/
4"
2 1/4"2 1/4"
2 1/
4"
2 1/4"2 1/4"
TS-F-RP-N925-8IML-HD – Trim set only. – Half dummy.
2 1/
4"
2 1/4"
CS-F-RP-N925-8xRP9158IML-PR Privacy set. Lever/knob x lever/knob interior mortise lock set. Sectional. RP-N925 w/RP-9157ERC (ext) RP-N925 w/RP-9158TPC (int)
CS-F-RP-N925-8xRP9175IML-PR Privacy set. Lever/knob x lever/knob interior mortise lock set. Sectional. RP-N925 w/RP-9498ERC (ext) RP-N925 w/RP-9499TPC (int)
CS-F-RP-N925-8xRP9200IML-PR Privacy set. Lever/knob x lever/knob interior mortise lock set. Sectional. RP-N925 w/RP-9494ERC (ext) RP-N925 w/RP-9495TPC (int)
CS-F-RP-N925-8xRP9225IML-PR Privacy set. Lever/knob x lever/knob interior mortise lock set. Sectional. RP-N925 w/RP-9490ERC (ext) RP-N925 w/RP-9491TPC (int)
TS-F-RP-N925-8xRP9158IML-PR Privacy set. Lever/knob x lever/knob interior mortise lock set. Sectional. RP-N925 w/RP-9157ERC (ext) RP-N925 w/RP-9158TPC (int)
TS-F-RP-N925-8xRP9175IML-PR Privacy set. Lever/knob x lever/knob interior mortise lock set. Sectional. RP-N925 w/RP-9498ERC (ext) RP-N925 w/RP-9499TPC (int)
TS-F-RP-N925-8xRP9200IML-PR Privacy set. Lever/knob x lever/knob interior mortise lock set. Sectional. RP-N925 w/RP-9494ERC (ext) RP-N925 w/RP-9495TPC (int)
TS-F-RP-N925-8xRP9225IML-PR Privacy set. Lever/knob x lever/knob interior mortise lock set. Sectional. RP-N925 w/RP-9490ERC (ext) RP-N925 w/RP-9491TPC (int)
Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m
PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.
14-67
Revised 02/08/16
Illustrations are for demonstration purposes only. Any knob, lever or ring pull can be combined with any style or size escutcheon plate.
N926-8 NOVUS SECTIONAL INTERIOR MORTISE SETS
Complete sets with interior mortise lock and spindle. IML dummy trim screws are horizontal unless specified vertical (no charge).
Trim sets for interior mortise locks with spindle, no lock included. IML dummy trim screws are horizontal unless specified vertical (no charge).
2 1/2” or 2 3/4” backset standard.Custom backsets available. Call for options and pricing.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.Note: Thru-bolt only.
Specify manufacturer & function of interior mortise lock.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.Note: Thru-bolt only.
CS-N926-8IML – Complete passage set with interior
mortise lock and spindle. OR TS-N926-8IML – Trim set only. No lock.
TS-N926-8IML-FD – Trim set only. – Full dummy.
2 1/
2"
2 1/2"2 1/2"
TS-N926-8IML-HD – Trim set only. – Full dummy.
2 1/
2"
2 1/2"
2 1/
2"
2 1/2"2 1/2"
CS-N926-8IML Passage set. Lever/knob x lever/knob interior mortise lock set. Sectional. P-N926 (ext) P-N926 (int)
TS-N926-8IML-FD Full dummy set. Lever/knob x lever/knob interior mortise lock set. Sectional. P-N926D (ext) P-N926D (int)
TS-N926-8IML-HD Half dummy set. Lever/knob interior mortise lock set. Sectional. P-N926D
TS-N926-8IML Passage set. Lever/knob x lever/knob interior mortise lock set. Sectional. P-N926 (ext) P-N926 (int)
TS-N926-8IML-FD Full dummy set. Lever/knob x lever/knob interior mortise lock set. Sectional. P-N926D (ext) P-N926D (int)
TS-N926-8IML-HD Half dummy set. Lever/knob interior mortise lock set. Sectional. P-N926D
Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m
PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.
14-68
Revised 02/08/16
Illustrations are for demonstration purposes only. Any knob, lever or ring pull can be combined with any style or size escutcheon plate.
N926-8 NOVUS SECTIONAL INTERIOR MORTISE SETS
Complete sets with interior mortise lock and spindle. IML dummy trim screws are horizontal unless specified vertical (no charge).2 7/8” center-to-center.
Trim sets for interior mortise locks with spindle, no lock included. IML dummy trim screws are horizontal unless specified vertical (no charge). 2 7/8” center-to-center.
2 1/2” or 2 3/4” backset standard.Custom backsets available. Call for options and pricing.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.Note: Thru-bolt only.
Specify manufacturer & function of interior mortise lock.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.Note: Thru-bolt only.
CS-N926-8x9158IML-PR – Complete privacy set with interior
mortise lock and spindle. OR TS-N926-8x9158IML-PR – Trim set only. No lock.
CS-N926-8x9175IML-PR – Complete privacy set with interior
mortise lock and spindle. OR TS-N926-8x9175IML-PR – Trim set only. No lock.
CS-N926-8x9200IML-PR – Complete privacy set with interior
mortise lock and spindle. OR TS-N926-8x9200IML-PR – Trim set only. No lock.
CS-N926-8x9225IML-PR – Complete privacy set with interior
mortise lock and spindle. OR TS-N926-8x9225IML-PR – Trim set only. No lock.
2 1/
2"
1 3/4"1 3/4"
2 7/
8"
2 1/
2"1 5/8"1 5/8"
2 7/
8"
2 1/
2"
2"2"
2 7/
8"
2 1/
2"
2 1/4"2 1/4"
2 7/
8"
9/16
"
11/1
6"
3/4"
7/16
"
CS-N926-8x9158IML-PR Privacy set. Lever/knob x lever/knob interior mortise lock set. Sectional. P-N926 w/9157ERC (ext) P-N926 w/9158TPC (int)
CS-N926-8x9175IML-PR Privacy set. Lever/knob x lever/knob interior mortise lock set. Sectional. P-N926 w/9496ERC (ext) P-N926 w/9497TPC (int)
CS-N926-8x9200IML-PR Privacy set. Lever/knob x lever/knob interior mortise lock set. Sectional. P-N926 w/9494ERC (ext) P-N926 w/9495TPC (int)
CS-N926-8x9225IML-PR Privacy set. Lever/knob x lever/knob interior mortise lock set. Sectional. P-N926 w/9492ERC (ext) P-N926 w/9493TPC (int)
TS-N926-8x9158IML-PR Privacy set. Lever/knob x lever/knob interior mortise lock set. Sectional. P-N926 w/9157ERC (ext) P-N926 w/9158TPC (int)
TS-N926-8x9175IML-PR Privacy set. Lever/knob x lever/knob interior mortise lock set. Sectional. P-N926 w/9496ERC (ext) P-N926 w/9497TPC (int)
TS-N926-8x9200IML-PR Privacy set. Lever/knob x lever/knob interior mortise lock set. Sectional. P-N926 w/9494ERC (ext) P-N926 w/9495TPC (int)
TS-N926-8x9225IML-PR Privacy set. Lever/knob x lever/knob interior mortise lock set. Sectional. P-N926 w/9492ERC (ext) P-N926 w/9493TPC (int)
Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m
PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.
14-69
Revised 02/08/16
Illustrations are for demonstration purposes only. Any knob, lever or ring pull can be combined with any style or size escutcheon plate.
F-N926-8 NOVUS SECTIONAL INTERIOR MORTISE SETS
Complete sets with interior mortise lock and spindle. IML dummy trim screws are horizontal unless specified vertical (no charge).
Trim sets for interior mortise locks with spindle, no lock included. IML dummy trim screws are horizontal unless specified vertical (no charge).
2 1/2” or 2 3/4” backset standard.Custom backsets available. Call for options and pricing.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.Note: Thru-bolt only.
Specify manufacturer & function of interior mortise lock.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.Note: Thru-bolt only.
CS-F-N926-8IML – Complete passage set with interior
mortise lock and spindle. OR TS-F-N926-8IML – Trim set only. No lock.
TS-F-N926-8IML-FD – Trim set only. – Full dummy.
2 1/
2"
2 1/2"2 1/2"
TS-F-N926-8IML-HD – Trim set only. – Full dummy.
2 1/
2"
2 1/2"
2 1/
2"
2 1/2"2 1/2"
CS-F-N926-8IML Passage set. Lever/knob x lever/knob interior mortise lock set. Sectional. P-N926 (ext) P-N926 (int)
TS-F-N926-8IML-FD Full dummy set. Lever/knob x lever/knob interior mortise lock set. Sectional. P-N926D (ext) P-N926D (int)
TS-F-N926-8IML-HD Half dummy set. Lever/knob interior mortise lock set. Sectional. P-N926D
TS-F-N926-8IML Passage set. Lever/knob x lever/knob interior mortise lock set. Sectional. P-N926 (ext) P-N926 (int)
TS-F-N926-8IML-FD Full dummy set. Lever/knob x lever/knob interior mortise lock set. Sectional. P-N926D (ext) P-N926D (int)
TS-F-N926-8IML-HD Half dummy set. Lever/knob interior mortise lock set. Sectional. P-N926D
Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m
PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.
14-70
Revised 02/08/16
Illustrations are for demonstration purposes only. Any knob, lever or ring pull can be combined with any style or size escutcheon plate.
F-N926-8 NOVUS SECTIONAL INTERIOR MORTISE SETS
Complete sets with interior mortise lock and spindle. IML dummy trim screws are horizontal unless specified vertical (no charge).2 7/8” center-to-center.
Trim sets for interior mortise locks with spindle, no lock included. IML dummy trim screws are horizontal unless specified vertical (no charge). 2 7/8” center-to-center.
2 1/2” or 2 3/4” backset standard.Custom backsets available. Call for options and pricing.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.Note: Thru-bolt only.
Specify manufacturer & function of interior mortise lock.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.Note: Thru-bolt only.
CS-F-N926-8x9175IML-PR – Complete privacy set with interior
mortise lock and spindle. OR TS-F-N926-8x9175IML-PR – Trim set only. No lock.
2 1/
2"
1 3/4"1 3/4"
2 7/
8"
CS-F-N926-8x9158IML-PR – Complete privacy set with interior
mortise lock and spindle. OR TS-F-N926-8x9158IML-PR – Trim set only. No lock.
2 1/
2"
1 5/8"1 5/8"
2 7/
8"
CS-F-N926-8x9200IML-PR – Complete privacy set with interior
mortise lock and spindle. OR TS-F-N926-8x9200IML-PR – Trim set only. No lock.
2 1/
2"
2"2"
2 7/
8"
CS-F-N926-8x9225IML-PR – Complete privacy set with interior
mortise lock and spindle. OR TS-F-N926-8x9225IML-PR – Trim set only. No lock.
2 1/
2"
2 1/4"2 1/4"
2 7/
8"
9/16
"
11/1
6"
3/4"
7/16
"
2 1/2" 2 1/2" 2 1/2" 2 1/2" 2 1/2" 2 1/2" 2 1/2" 2 1/2"
CS-F-N926-8x9158IML-PR Privacy set. Lever/knob x lever/knob interior mortise lock set. Sectional. P-N926 w/9157ERC (ext) P-N926 w/9158TPC (int)
CS-F-N926-8x9175IML-PR Privacy set. Lever/knob x lever/knob interior mortise lock set. Sectional. P-N926 w/9496ERC (ext) P-N926 w/9497TPC (int)
CS-F-N926-8x9200IML-PR Privacy set. Lever/knob x lever/knob interior mortise lock set. Sectional. P-N926 w/9494ERC (ext) P-N926 w/9495TPC (int)
CS-F-N926-8x9225IML-PR Privacy set. Lever/knob x lever/knob interior mortise lock set. Sectional. P-N926 w/9492ERC (ext) P-N926 w/9493TPC (int)
TS-F-N926-8x9158IML-PR Privacy set. Lever/knob x lever/knob interior mortise lock set. Sectional. P-N926 w/9157ERC (ext) P-N926 w/9158TPC (int)
TS-F-N926-8x9175IML-PR Privacy set. Lever/knob x lever/knob interior mortise lock set. Sectional. P-N926 w/9496ERC (ext) P-N926 w/9497TPC (int)
TS-F-N926-8x9200IML-PR Privacy set. Lever/knob x lever/knob interior mortise lock set. Sectional. P-N926 w/9494ERC (ext) P-N926 w/9495TPC (int)
TS-F-N926-8x9225IML-PR Privacy set. Lever/knob x lever/knob interior mortise lock set. Sectional. P-N926 w/9492ERC (ext) P-N926 w/9493TPC (int)
Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m
PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.
14-71
Revised 02/08/16
Illustrations are for demonstration purposes only. Any knob, lever or ring pull can be combined with any style or size escutcheon plate.
RP-N926-8 NOVUS SECTIONAL INTERIOR MORTISE SETS
Complete sets with interior mortise lock and spindle. IML dummy trim screws are horizontal unless specified vertical (no charge).
Trim sets for interior mortise locks with spindle, no lock included. IML dummy trim screws are horizontal unless specified vertical (no charge).
2 1/2” or 2 3/4” backset standard.Custom backsets available. Call for options and pricing.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.Note: Thru-bolt only.
Specify manufacturer & function of interior mortise lock.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.Note: Thru-bolt only.
TS-RP-N926-8IML-FD – Trim set only. – Full dummy.
2 1/2"
2 1/
2"
2 1/2"
2 1/
2"
CS-RP-N926-8IML – Complete passage set with interior
mortise lock and spindle. OR TS-RP-N926-8IML – Trim set only. No lock.
TS-RP-N926-8IML-HD – Trim set only. – Full dummy.
2 1/2"2 1/2"
2 1/
2"
2 1/2"
CS-RP-N926-8IML Passage set. Lever/knob x lever/knob interior mortise lock set. Sectional. RP-N926 (ext) RP-N926 (int)
TS-RP-N926-8IML-FD Full dummy set. Lever/knob x lever/knob interior mortise lock set. Sectional. RP-N926D (ext) RP-N926D (int)
TS-RP-N926-8IML-HD Half dummy set. Lever/knob interior mortise lock set. Sectional. RP-N926D
TS-RP-N926-8IML Passage set. Lever/knob x lever/knob interior mortise lock set. Sectional. RP-N926 (ext) RP-N926 (int)
TS-RP-N926-8IML-FD Full dummy set. Lever/knob x lever/knob interior mortise lock set. Sectional. RP-N926D (ext) RP-N926D (int)
TS-RP-N926-8IML-HD Half dummy set. Lever/knob interior mortise lock set. Sectional. RP-N926D
Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m
PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.
14-72
Revised 02/08/16
Illustrations are for demonstration purposes only. Any knob, lever or ring pull can be combined with any style or size escutcheon plate.
RP-N926-8 NOVUS SECTIONAL INTERIOR MORTISE SETS
Complete sets with interior mortise lock and spindle. IML dummy trim screws are horizontal unless specified vertical (no charge).2 7/8” center-to-center.
Trim sets for interior mortise locks with spindle, no lock included. IML dummy trim screws are horizontal unless specified vertical (no charge). 2 7/8” center-to-center.
2 1/2” or 2 3/4” backset standard.Custom backsets available. Call for options and pricing.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.Note: Thru-bolt only.
Specify manufacturer & function of interior mortise lock.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.Note: Thru-bolt only.
CS-RP-N926-8xRP9175IML-PR – Complete privacy set with interior
mortise lock and spindle. OR TS-RP-N926-8xRP9175IML-PR – Trim set only. No lock.
CS-RP-N926-8xRP9200IML-PR – Complete privacy set with interior
mortise lock and spindle. OR TS-RP-N926-8xRP9200IML-PR – Trim set only. No lock.
CS-RP-N926-8xRP9225IML-PR – Complete privacy set with interior
mortise lock and spindle. OR
TS-RP-N926-8xRP9225IML-PR – Trim set only. No lock.
2 1/
2"
2 1/
2"
2 1/
2"
2"1 3/4"1 3/4"
CS-RP-N926-8xRP9158IML-PR – Complete privacy set with interior
mortise lock and spindle. OR TS-RP-N926-8xRP9158IML-PR – Trim set only. No lock.
2 1/
2"1 5/8"1 5/8"
2 7/
8"
2 7/
8"
2 7/
8"
2 7/
8"
2 1/4"2" 2 1/4"
9/16
"
11/1
6"
3/4"
7/16
"
CS-RP-N926-8xRP9158IML-PR Privacy set. Lever/knob x lever/knob interior mortise lock set. Sectional. RP-N926 w/RP-9157ERC (ext) RP-N926 w/RP-9158TPC (int)
CS-RP-N926-8xRP9175IML-PR Privacy set. Lever/knob x lever/knob interior mortise lock set. Sectional. RP-N926 w/RP-9498ERC (ext) RP-N926 w/RP-9499TPC (int)
CS-RP-N926-8xRP9200IML-PR Privacy set. Lever/knob x lever/knob interior mortise lock set. Sectional. RP-N926 w/RP-9494ERC (ext) RP-N926 w/RP-9495TPC (int)
CS-RP-N926-8xRP9225IML-PR Privacy set. Lever/knob x lever/knob interior mortise lock set. Sectional. RP-N926 w/RP-9490ERC (ext) RP-N926 w/RP-9491TPC (int)
TS-RP-N926-8xRP9158IML-PR Privacy set. Lever/knob x lever/knob interior mortise lock set. Sectional. RP-N926 w/RP-9157ERC (ext) RP-N926 w/RP-9158TPC (int)
TS-RP-N926-8xRP9175IML-PR Privacy set. Lever/knob x lever/knob interior mortise lock set. Sectional. RP-N926 w/RP-9498ERC (ext) RP-N926 w/RP-9499TPC (int)
TS-RP-N926-8xRP9200IML-PR Privacy set. Lever/knob x lever/knob interior mortise lock set. Sectional. RP-N926 w/RP-9494ERC (ext) RP-N926 w/RP-9495TPC (int)
TS-RP-N926-8xRP9225IML-PR Privacy set. Lever/knob x lever/knob interior mortise lock set. Sectional. RP-N926 w/RP-9490ERC (ext) RP-N926 w/RP-9491TPC (int)
Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m
PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.
14-73
Revised 02/08/16
Illustrations are for demonstration purposes only. Any knob, lever or ring pull can be combined with any style or size escutcheon plate.
F-RP-N926-8 NOVUS SECTIONAL INTERIOR MORTISE SETS
Complete sets with interior mortise lock and spindle. IML dummy trim screws are horizontal unless specified vertical (no charge).
Trim sets for interior mortise locks with spindle, no lock included. IML dummy trim screws are horizontal unless specified vertical (no charge).
2 1/2” or 2 3/4” backset standard.Custom backsets available. Call for options and pricing.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.Note: Thru-bolt only.
Specify manufacturer & function of interior mortise lock.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.Note: Thru-bolt only.
TS-F-RP-N926-8IML-FD – Trim set only. – Full dummy.
2 1/2"
2 1/
2"
2 1/2"
2 1/
2"
CS-F-RP-N926-8IML – Complete passage set with interior
mortise lock and spindle. OR TS-F-RP-N926-8IML – Trim set only. No lock.
TS-F-RP-N926-8IML-HD – Trim set only. – Full dummy.
2 1/2"2 1/2"
2 1/
2"
2 1/2"
CS-F-RP-N926-8IML Passage set. Lever/knob x lever/knob interior mortise lock set. Sectional. RP-N926 (ext) RP-N926 (int)
TS-F-RP-N926-8IML-FD Full dummy set. Lever/knob x lever/knob interior mortise lock set. Sectional. RP-N926D (ext) RP-N926D (int)
TS-F-RP-N926-8IML-HD Half dummy set. Lever/knob interior mortise lock set. Sectional. RP-N926D
TS-F-RP-N926-8IML Passage set. Lever/knob x lever/knob interior mortise lock set. Sectional. RP-N926 (ext) RP-N926 (int)
TS-F-RP-N926-8IML-FD Full dummy set. Lever/knob x lever/knob interior mortise lock set. Sectional. RP-N926D (ext) RP-N926D (int)
TS-F-RP-N926-8IML-HD Half dummy set. Lever/knob interior mortise lock set. Sectional. RP-N926D
Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m
PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.
14-74
Revised 02/08/16
Illustrations are for demonstration purposes only. Any knob, lever or ring pull can be combined with any style or size escutcheon plate.
F-RP-N926-8 NOVUS SECTIONAL INTERIOR MORTISE SETS
Complete sets with interior mortise lock and spindle. IML dummy trim screws are horizontal unless specified vertical (no charge).2 7/8” center-to-center.
Trim sets for interior mortise locks with spindle, no lock included. IML dummy trim screws are horizontal unless specified vertical (no charge). 2 7/8” center-to-center.
2 1/2” or 2 3/4” backset standard.Custom backsets available. Call for options and pricing.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.Note: Thru-bolt only.
Specify manufacturer & function of interior mortise lock.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.Note: Thru-bolt only.
CS-F-RP-N926-8xRP9175IML-PR – Complete privacy set with interior
mortise lock and spindle. OR TS-F-RP-N926-8xRP9175IML-PR – Trim set only. No lock.
CS-F-RP-N926-8xRP9200IML-PR – Complete privacy set with interior
mortise lock and spindle. OR TS-F-RP-N926-8xRP9200IML-PR – Trim set only. No lock.
CS-F-RP-N926-8xRP9225IML-PR – Trim set only. – Full dummy.
OR TS-F-RP-N926-8xRP9225IML-PR – Trim set only.
2 1/
2"
2 1/
2"
CS-F-RP-N926-8xRP9158IML-PR – Complete privacy set with interior
mortise lock and spindle. OR TS-F-RP-N926-8xRP9158IML-PR – Trim set only. No lock.
2"1 3/4"1 3/4"
2 1/
2"
1 5/8"1 5/8"
2 7/
8" 2 1/
2"
2 1/4"
2 7/
8"
2 7/
8"
2 7/
8"
2" 2 1/4"
9/16
"
11/1
6"
3/4"
7/16
"
2 1/2" 2 1/2" 2 1/2" 2 1/2" 2 1/2" 2 1/2" 2 1/2" 2 1/2"
CS-F-RP-N926-8xRP9158IML-PR Privacy set. Lever/knob x lever/knob interior mortise lock set. Sectional. RP-N926 w/RP-9157ERC (ext) RP-N926 w/RP-9158TPC (int)
CS-F-RP-N926-8xRP9175IML-PR Privacy set. Lever/knob x lever/knob interior mortise lock set. Sectional. RP-N926 w/RP-9498ERC (ext) RP-N926 w/RP-9499TPC (int)
CS-F-RP-N926-8xRP9200IML-PR Privacy set. Lever/knob x lever/knob interior mortise lock set. Sectional. RP-N926 w/RP-9494ERC (ext) RP-N926 w/RP-9495TPC (int)
CS-F-RP-N926-8xRP9225IML-PR Privacy set. Lever/knob x lever/knob interior mortise lock set. Sectional. RP-N926 w/RP-9490ERC (ext) RP-N926 w/RP-9491TPC (int)
TS-F-RP-N926-8xRP9158IML-PR Privacy set. Lever/knob x lever/knob interior mortise lock set. Sectional. RP-N926 w/RP-9157ERC (ext) RP-N926 w/RP-9158TPC (int)
TS-F-RP-N926-8xRP9175IML-PR Privacy set. Lever/knob x lever/knob interior mortise lock set. Sectional. RP-N926 w/RP-9498ERC (ext) RP-N926 w/RP-9499TPC (int)
TS-F-RP-N926-8xRP9200IML-PR Privacy set. Lever/knob x lever/knob interior mortise lock set. Sectional. RP-N926 w/RP-9494ERC (ext) RP-N926 w/RP-9495TPC (int)
TS-F-RP-N926-8xRP9225IML-PR Privacy set. Lever/knob x lever/knob interior mortise lock set. Sectional. RP-N926 w/RP-9490ERC (ext) RP-N926 w/RP-9491TPC (int)
Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m
PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.
14-75
Revised 02/08/16
Trim sets for interior mortise locks with spindle, no lock included. 2 1/4” center-to-center.
Illustrations are for demonstration purposes only. Any knob, lever or ring pull can be combined with any style or size escutcheon plate.
Complete sets with interior mortise lock and spindle. 2 1/4” center-to-center.
2 1/2” or 2 3/4” backset standard.Custom backsets available. Call for options and pricing.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.
405 BEVEL EDGE INTERIOR MORTISE LOCK PASSAGE & PRIVACY SETS
CS-405IML – Complete passage set with interior
mortise lock and spindle. OR TS-405IML – Trim set only. No lock.
CS-405IML-PR – Complete privacy set with interior
mortise lock and spindle. OR TS-405IML-PR – Trim set only. No lock.
TS-405IML-FD – Trim set only. – Full dummy.
TS-405IML-HD – Trim set only. – Half dummy.
6 3/
16"
1 3/4" 1 3/4"
6 3/
16"
1 3/4" 1 3/4"
6 3/
16"
1 3/4" 1 3/4"
6 3/
16"
1 3/4"
2 1/
16"
2 1/
16"
2 1/
16"
2 1/
16"
2 1/
16"
2 1/
16"
2 1/
16"2
1/4"
2 1/
4"
Specify manufacturer & function of interior mortise lock.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.
CS-405IML Passage set. P-405OH (ext) P-405OH (int)
CS-405IML-PR Privacy set. P-405OH-IML-ERC (ext) P-405OH-IML-TPC (int)
TS-405IML-FD Full dummy. P-405OH-D (ext) P-405OH-D (int)
TS-405IML-HD Half dummy. P-405OH-D
TS-405IML Passage set. P-405OH (ext) P-405OH (int)
TS-405IML-PR Privacy set. P-405OH-IML-ERC (ext) P-405OH-IML-TPC (int)
TS-405IML-FD Full dummy. P-405OH-D (ext) P-405OH-D (int)
TS-405IML-HD Half dummy. P-405OH-D
Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m
PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.
14-76
Revised 02/08/16
Trim sets for interior mortise locks with spindle, no lock included. 2 1/4” center-to-center.
Illustrations are for demonstration purposes only. Any knob, lever or ring pull can be combined with any style or size escutcheon plate.
Complete sets with interior mortise lock and spindle. 2 1/4” center-to-center.
2 1/2” or 2 3/4” backset standard.Custom backsets available. Call for options and pricing.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.
F405 BEVEL EDGE INTERIOR MORTISE LOCK PASSAGE & PRIVACY SETS
CS-F405IML – Complete passage set with interior
mortise lock and spindle. OR TS-F405IML – Trim set only. No lock.
CS-F405IML-PR – Complete privacy set with interior
mortise lock and spindle. OR TS-F405IML-PR – Trim set only. No lock.
TS-F405IML-FD – Trim set only. – Full dummy.
TS-F405IML-HD – Trim set only. – Half dummy.
6 3/
16"
1 3/4" 1 3/4"
6 3/
16"
1 3/4" 1 3/4"
6 3/
16"
1 3/4" 1 3/4"
6 3/
16"
1 3/4"
4 1/
8"
4 1/
8"
2 1/
4"
4 1/
8"
4 1/
8"
4 1/
8"
4 1/
8"
Specify manufacturer & function of interior mortise lock.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.
CS-F405IML Passage set. P-F405OH (ext) P-F405OH (int)
CS-F405IML-PR Privacy set. P-F405OH-IML-ERC (ext) P-F405OH-IML-TPC (int)
TS-F405IML-FD Full dummy. P-F405OH-D (ext) P-F405OH-D (int)
TS-F405IML-HD Half dummy. P-F405OH-D
TS-F405IML Passage set. P-F405OH (ext) P-F405OH (int)
TS-F405IML-PR Privacy set. P-F405OH-IML-ERC (ext) P-F405OH-IML-TPC (int)
TS-F405IML-FD Full dummy. P-F405OH-D (ext) P-F405OH-D (int)
TS-F405IML-HD Half dummy. P-F405OH-D
Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m
PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.
14-77
Revised 02/08/16
Trim sets for interior mortise locks with spindle, no lock included. 2 1/4” center-to-center.
Illustrations are for demonstration purposes only. Any knob, lever or ring pull can be combined with any style or size escutcheon plate.
Complete sets with interior mortise lock and spindle. 2 1/4” center-to-center.
2 1/2” or 2 3/4” backset standard.Custom backsets available. Call for options and pricing.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.
406 BEVEL EDGE INTERIOR MORTISE LOCK PASSAGE & PRIVACY SETS
CS-406IML – Complete passage set with interior
mortise lock and spindle. OR TS-406IML – Trim set only. No lock.
CS-406IML-PR – Complete privacy set with interior
mortise lock and spindle. OR TS-406IML-PR – Trim set only. No lock.
TS-406IML-FD – Trim set only. – Full dummy.
TS-406IML-HD – Trim set only. – Half dummy.
6 3/
16"
2 1/2" 2 1/2"
6 3/
16"
2 1/2" 2 1/2"
6 3/
16"
2 1/2" 2 1/2"
6 3/
16"
2 1/2"
2 1/
8"
2 1/
8"
2 1/
8"
2 1/
8"
2 1/
8"
2 1/
8"
2 1/
4"
2 1/
8"2
1/4"
Specify manufacturer & function of interior mortise lock.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.
CS-406IML Passage set. P-406OH (ext) P-406OH (int)
CS-406IML-PR Privacy set. P-406OH-IML-ERC (ext) P-406OH-IML-TPC (int)
TS-406IML-FD Full dummy. P-406OH-D (ext) P-406OH-D (int)
TS-406IML-HD Half dummy. P-406OH-D
TS-406IML Passage set. P-406OH (ext) P-406OH (int)
TS-406IML-PR Privacy set. P-406OH-IML-ERC (ext) P-406OH-IML-TPC (int)
TS-406IML-FD Full dummy. P-406OH-D (ext) P-406OH-D (int)
TS-406IML-HD Half dummy. P-406OH-D
Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m
PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.
14-78
Revised 02/08/16
Illustrations are for demonstration purposes only. Any knob, lever or ring pull can be combined with any style or size escutcheon plate.
Trim sets for interior mortise locks with spindle, no lock included. 2 1/4” center-to-center.
Complete sets with interior mortise lock and spindle. 2 1/4” center-to-center.
2 1/2” or 2 3/4” backset standard.Custom backsets available. Call for options and pricing.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.
F406 BEVEL EDGE INTERIOR MORTISE LOCK PASSAGE & PRIVACY SETS
CS-F406IML – Complete passage set with interior
mortise lock and spindle. OR TS-F406IML – Trim set only. No lock.
CS-F406IML-PR – Complete privacy set with interior
mortise lock and spindle. OR TS-F406IML-PR – Trim set only. No lock.
TS-F406IML-FD – Trim set only. – Full dummy.
TS-F406IML-HD – Trim set only. – Half dummy.
6 3/
16"
2 1/2" 2 1/2"
6 3/
16"
2 1/2" 2 1/2"
6 3/
16"
2 1/2" 2 1/2"
6 3/
16"
2 1/2"
4 1/
16"
4 1/
16"
4 1/
16"
2 1/
4"
4 1/
16"
4 1/
16"
4 1/
16"
Specify manufacturer & function of interior mortise lock.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.
CS-F406IML Passage set. P-F406OH (ext) P-F406OH (int)
CS-F406IML-PR Privacy set. P-F406OH-IML-ERC (ext) P-F406OH-IML-TPC (int)
TS-F406IML-FD Full dummy. P-F406OH-D (ext) P-F406OH-D (int)
TS-F406IML-HD Half dummy. P-F406OH-D
TS-F406IML Passage set. P-F406OH (ext) P-F406OH (int)
TS-F406IML-PR Privacy set. P-F406OH-IML-ERC (ext) P-F406OH-IML-TPC (int)
TS-F406IML-FD Full dummy. P-F406OH-D (ext) P-F406OH-D (int)
TS-F406IML-HD Half dummy. P-F406OH-D
Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m
PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.
14-79
Revised 02/08/16
Illustrations are for demonstration purposes only. Any knob, lever or ring pull can be combined with any style or size escutcheon plate.
Complete sets with interior mortise lock and spindle. 2 1/4” center-to-center. (Shown)
Complete sets with interior mortise lock and spindle. 2 7/8” center-to-center.
Trim sets for interior mortise locks with spindle, no lock included. 2 1/4” center-to-center. (Shown)
Trim sets for interior mortise locks with spindle, no lock included. 2 7/8” center-to-center.
2 1/2” or 2 3/4” backset standard.Custom backsets available. Call for options and pricing.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.
407 BEVEL EDGE INTERIOR MORTISE LOCK PASSAGE & PRIVACY SETS
CS-407IML – Complete passage set with interior
mortise lock and spindle. OR TS-407IML – Trim set only. No lock.
CS-407IML-PR – Complete privacy set with interior
mortise lock and spindle. OR TS-407IML-PR – Trim set only. No lock.
TS-407IML-FD – Trim set only. – Full dummy.
TS-407IML-HD – Trim set only. – Half dummy.
8 3/
4"
2" 2"
8 3/
4"
2" 2"
8 3/
4"
2" 2"
8 3/
4"
2"
2 3/
4"
2 3/
4"
2 3/
4"
2 3/
4"
2 3/
4"
2 3/
4"
2 1/
4"
2 3/
4"2
1/4"
Specify manufacturer & function of interior mortise lock.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.
CS-407IML Passage set. P-407 (ext) P-407 (int)CS-407IML-PR Privacy set. P-407IML-ERC (ext) P-407IML-TPC (int)TS-407IML-FD Full dummy. P-407D (ext) P-407D (int)TS-407IML-HD Half dummy. P-407D
CS-407-8IML Passage set. P-407IML (ext) P-407IML (int)CS-407-8IML-PR Privacy set. P-407-8IML-ERC (ext) P-407-8IML-TPC (int)
TS-407IML Passage set. P-407 (ext) P-407 (int)TS-407IML-PR Privacy set. P-407IML-ERC (ext) P-407IML-TPC (int)TS-407IML-FD Full dummy. P-407D (ext) P-407D (int)TS-407IML-HD Half dummy. P-407D
TS-407-8IML Passage set. P-407 (ext) P-407 (int)TS-407-8IML-PR Privacy set. P-407-8IML-ERC (ext) P-407-8IML-TPC (int)
Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m
PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.
14-80
Revised 02/08/16
Illustrations are for demonstration purposes only. Any knob, lever or ring pull can be combined with any style or size escutcheon plate.
Complete sets with interior mortise lock and spindle. 2 7/8” center-to-center.
Complete sets with interior mortise lock and spindle. 2 1/4” center-to-center. (Shown)
Trim sets for interior mortise locks with spindle, no lock included. 2 1/4” center-to-center. (Shown)
Trim sets for interior mortise locks with spindle, no lock included. 2 7/8” center-to-center.
2 1/2” or 2 3/4” backset standard.Custom backsets available. Call for options and pricing.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.
F407 BEVEL EDGE INTERIOR MORTISE LOCK PASSAGE & PRIVACY SETS
CS-F407IML – Complete passage set with interior
mortise lock and spindle. OR TS-F407IML – Trim set only. No lock.
CS-F407IML-PR – Complete privacy set with interior
mortise lock and spindle. OR TS-F407IML-PR – Trim set only. No lock.
TS-F407IML-FD – Trim set only. – Full dummy.
TS-F407IML-HD – Trim set only. – Half dummy.
8 3/
4"
2" 2"
8 3/
4"
2" 2"
8 3/
4"
2" 2"
8 3/
4"
2"
6"6" 6"6" 6"6"
2 1/
4"
Specify manufacturer & function of interior mortise lock.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.
CS-F407IML Passage set. P-F407 (ext) P-F407 (int)CS-F407IML-PR Privacy set. P-F407IML-ERC (ext) P-F407IML-TPC (int)TS-F407IML-FD Full dummy. P-F407D (ext) P-F407D (int)TS-F407IML-HD Half dummy. P-F407D
CS-F407-8IML Passage set. P-F407 (ext) P-F407 (int)CS-F407-8IML-PR Privacy set. P-F407-8IML-ERC (ext) P-F407-8IML-TPC (int)
TS-F407IML Passage set. P-F407OH (ext) P-F407OH (int)TS-F407IML-PR Privacy set. P-F407IML-ERC (ext) P-F407IML-TPC (int)TS-F407IML-FD Full dummy. P-F407D (ext) P-F407D (int)TS-F407IML-HD Half dummy. P-F407D
TS-F407-8IML Passage set. P-F407 (ext) P-F407 (int)TS-F407-8IML-PR Privacy set. P-F407-8IML-ERC (ext) P-F407-8IML-TPC (int)
Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m
PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.
14-81
Revised 02/08/16
Illustrations are for demonstration purposes only. Any knob, lever or ring pull can be combined with any style or size escutcheon plate.
Complete sets with interior mortise lock and spindle. 2 1/4” center-to-center. (Shown)
Trim sets for interior mortise locks with spindle, no lock included. 2 1/4” center-to-center. (Shown)
2 1/2” or 2 3/4” backset standard.Custom backsets available. Call for options and pricing.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.
408 BEVEL EDGE INTERIOR MORTISE LOCK PASSAGE & PRIVACY SETS
CS-408IML – Complete passage set with interior
mortise lock and spindle. OR TS-408IML – Trim set only. No lock.
CS-408IML-PR – Complete privacy set with interior
mortise lock and spindle. OR TS-408IML-PR – Trim set only. No lock.
TS-408IML-FD – Trim set only. – Full dummy.
TS-408IML-HD – Trim set only. – Half dummy.
8 3/
4"
2 1/2" 2 1/2"
8 3/
4"
2 1/2" 2 1/2"
8 3/
4"
2 1/2" 2 1/2"
8 3/
4"
2 1/2"
2 3/
4"
2 3/
4"
2 3/
4"
2 3/
4"
2 3/
4"
2 3/
4"
2 1/
4"
2 3/
4"2
1/4"
Complete sets with interior mortise lock and spindle. 2 7/8” center-to-center.
Trim sets for interior mortise locks with spindle, no lock included. 2 7/8” center-to-center.
Specify manufacturer & function of interior mortise lock.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.
CS-408IML Passage set. P-408 (ext) P-408 (int)CS-408IML-PR Privacy set. P-408IML-ERC (ext) P-408IML-TPC (int)TS-408IML-FD Full dummy. P-408D (ext) P-408D (int)TS-408IML-HD Half dummy. P-408D.
CS-408-8IML Passage set. P-408 (ext) P-408 (int).CS-408-8IML-PR Privacy set. P-408-8IML-ERC (ext) P-408-8IML-TPC (int)
TS-408IML Passage set. P-408 (ext) P-408 (int)TS-408IML-PR Privacy set. P-408IML-ERC (ext) P-408IML-TPC (int)TS-408IML-FD Full dummy. P-408D (ext) P-408D (int)TS-408IML-HD Half dummy. P-408D
TS-408-8IML Passage set. P-408 (ext) P-408 (int)TS-408-8IML-PR Privacy set. P-408-8IML-ERC (ext) P-408-8IML-TPC (int)
Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m
PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.
14-82
Revised 02/08/16
Illustrations are for demonstration purposes only. Any knob, lever or ring pull can be combined with any style or size escutcheon plate.
Trim sets for interior mortise locks with spindle, no lock included. 2 1/4” center-to-center. (Shown)
Complete sets with interior mortise lock and spindle. 2 7/8” center-to-center.
Trim sets for interior mortise locks with spindle, no lock included. 2 7/8” center-to-center.
Complete sets with interior mortise lock and spindle. 2 1/4” center-to-center. (Shown)
2 1/2” or 2 3/4” backset standard.Custom backsets available. Call for options and pricing.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.
F408 BEVEL EDGE INTERIOR MORTISE LOCK PASSAGE & PRIVACY SETS
CS-F408IML – Complete passage set with interior
mortise lock and spindle. OR TS-F408IML – Trim set only. No lock.
CS-F408IML-PR – Complete privacy set with interior
mortise lock and spindle. OR TS-F408IML-PR – Trim set only. No lock.
TS-F408IML-FD – Trim set only. – Full dummy.
TS-F408IML-HD – Trim set only. – Half dummy.
8 3/
4"
2 1/2" 2 1/2"
8 3/
4"
2 1/2" 2 1/2"
8 3/
4"
2 1/2" 2 1/2"
8 3/
4"
2 1/2"
6"6" 6"6" 6"
2 1/
4"
Specify manufacturer & function of interior mortise lock.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.
CS-F408IML Passage set. P-F408 (ext) P-F408 (int)CS-F408IML-PR Privacy set. P-F408IML-ERC (ext) P-F408IML-TPC (int)TS-F408IML-FD Full dummy. P-F408D (ext) P-F408D (int)TS-F408IML-HD Half dummy. P-F408D
CS-F408-8IML Passage set. P-F408 (ext) P-F408 (int)CS-F408-8IML-PR Privacy set. P-F408-8IML-ERC (ext) P-F408-8IML-TPC (int)
TS-F408IML Passage set. P-F408 (ext) P-F408 (int)TS-F408IML-PR Privacy set. P-F408IML-ERC (ext) P-F408IML-TPC (int)TS-F408IML-FD Full dummy. P-F408D (ext) P-F408D (int)TS-F408IML-HD Half dummy. P-F408D
TS-F408-8IML Passage set. P-F408 (ext) P-F408 (int)TS-F408-8IML-PR Privacy set. P-F408-8IML-ERC (ext) P-F408-8IML-TPC (int)
Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m
PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.
14-83
Revised 02/08/16
Illustrations are for demonstration purposes only. Any knob, lever or ring pull can be combined with any style or size escutcheon plate.
Trim sets for interior mortise locks with spindle, no lock included. 2 1/4” center-to-center. (Shown)
Complete sets with interior mortise lock and spindle. 2 7/8” center-to-center.
Trim sets for interior mortise locks with spindle, no lock included. 2 7/8” center-to-center.
Complete sets with interior mortise lock and spindle. 2 1/4” center-to-center. (Shown)
2 1/2” or 2 3/4” backset standard.Custom backsets available. Call for options and pricing.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.
409 BEVEL EDGE INTERIOR MORTISE LOCK PASSAGE & PRIVACY SETS
CS-409IML – Complete passage set with interior
mortise lock and spindle. OR TS-409IML – Trim set only. No lock.
CS-409IML-PR – Complete privacy set with interior
mortise lock and spindle. OR TS-409IML-PR – Trim set only. No lock.
TS-409IML-FD – Trim set only. – Full dummy.
TS-409IML-HD – Trim set only. – Half dummy.
10"
2 1/2" 2 1/2"
10"
2 1/2" 2 1/2"
10"
2 1/2" 2 1/2"
10"
2 1/2"
2 1/
4"
3 3/
8"
3 3/
8"
3 3/
8"
3 3/
8"
3 3/
8"
3 3/
8"
2 1/
4"3
3/8"
Specify manufacturer & function of interior mortise lock.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.
CS-409IML Passage set. P-409IML (ext) P-409IML (int)CS-409IML-PR Privacy set. P-409IML-ERC (ext) P-409IML-TPC (int)TS-409IML-FD Full dummy. P-409D (ext) P-409D (int)TS-409IML-HD Half dummy. P-409D
CS-409-8IML Passage set. P-409IML (ext) P-409IML (int)CS-409-8IML-PR Privacy set. P-409-8IML-ERC (ext) P-409-8IML-TPC (int)
TS-409IML Passage set. P-409IML (ext) P-409IML (int)TS-409IML-PR Privacy set. P-409IML-ERC (ext) P-409IML-TPC (int)TS-409IML-FD Full dummy. P-409D (ext) P-409D (int)TS-409IML-HD Half dummy. P-409D
TS-409-8IML Passage set. P-409IML (ext) P-409IML (int)TS-409-8IML-PR Privacy set. P-409-8IML-ERC (ext) P-409-8IML-TPC (int)
Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m
PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.
14-84
Revised 02/08/16
Illustrations are for demonstration purposes only. Any knob, lever or ring pull can be combined with any style or size escutcheon plate.
Complete sets with interior mortise lock and spindle. 2 1/4” center-to-center. (Shown)
Trim sets for interior mortise locks with spindle, no lock included. 2 1/4” center-to-center. (Shown)
Complete sets with interior mortise lock and spindle. 2 7/8” center-to-center.
Trim sets for interior mortise locks with spindle, no lock included. 2 7/8” center-to-center.
2 1/2” or 2 3/4” backset standard.Custom backsets available. Call for options and pricing.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.
F409 BEVEL EDGE INTERIOR MORTISE LOCK PASSAGE & PRIVACY SETS
CS-F409IML – Complete passage set with interior
mortise lock and spindle. OR TS-F409IML – Trim set only. No lock.
CS-F409IML-PR – Complete privacy set with interior
mortise lock and spindle. OR TS-F409IML-PR – Trim set only. No lock.
TS-F409IML-FD – Trim set only. – Full dummy.
TS-F409IML-HD – Trim set only. – Half dummy.
10"
2 1/2" 2 1/2"
10"
2 1/2" 2 1/2"
10"
2 1/2" 2 1/2"
10"
2 1/2"
6 5/
8"
6 5/
8"
6 5/
8"
6 5/
8"
6 5/
8"
6 5/
8"
2 1/
4"
Specify manufacturer & function of interior mortise lock.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.
CS-F409IML Passage set. P-F409IML (ext) P-F409IML (int)CS-F409IML-PR Privacy set. P-F409IML-ERC (ext) P-F409IML-TPC (int)TS-F409IML-FD Full dummy. P-F409D (ext) P-F409D (int)TS-F409IML-HD Half dummy. P-F409D
CS-F409-8IML Passage set. P-F409IML (ext) P-F409IML (int)CS-F409-8IML-PR Privacy set. P-F409-8IML-ERC (ext) P-F409-8IML-TPC (int)
TS-F409IML Passage set. P-F409IML (ext) P-F409IML (int)TS-F409IML-PR Privacy set. P-F409IML-ERC (ext) P-F409IML-TPC (int)TS-F409IML-FD Full dummy. P-F409D (ext) P-F409D (int)TS-F409IML-HD Half dummy. P-F409D
TS-F409-8IML Passage set. P-F409IML (ext) P-F409IML (int)TS-F409-8IML-PR Privacy set. P-F409-8IML-ERC (ext) P-F409-8IML-TPC (int)
Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m
PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.
14-85
Revised 02/08/16
Illustrations are for demonstration purposes only. Any knob, lever or ring pull can be combined with any style or size escutcheon plate.
Complete sets with interior mortise lock and spindle. 2 1/4” center-to-center. (Shown)
Trim sets for interior mortise locks with spindle, no lock included. 2 1/4” center-to-center. (Shown)
Complete sets with interior mortise lock and spindle. 2 7/8” center-to-center.
Trim sets for interior mortise locks with spindle, no lock included. 2 7/8” center-to-center.
2 1/2” or 2 3/4” backset standard.Custom backsets available. Call for options and pricing.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.
410 BEVEL EDGE INTERIOR MORTISE LOCK PASSAGE & PRIVACY SETS
CS-410IML – Complete passage set with interior
mortise lock and spindle. OR TS-410IML – Trim set only. No lock.
CS-410IML-PR – Complete privacy set with interior
mortise lock and spindle. OR TS-410IML-PR – Trim set only. No lock.
TS-410IML-FD – Trim set only. – Full dummy.
TS-410IML-HD – Trim set only. – Half dummy.
10"
3" 3"
10"
3" 3"
10"
3" 3"
10"
3"
3 1/
4"
3 1/
4"
3 1/
4"
3 1/
4"
3 1/
4"
3 1/
4"
2 1/
4"
3 1/
4"2
1/4"
Specify manufacturer & function of interior mortise lock.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.
CS-410IML Passage set. P-410IML (ext) P-410IML (int)CS-410IML-PR Privacy set. P-410IML-ERC (ext) P-410IML-TPC (int)TS-410IML-FD Full dummy. P-410D (ext) P-410D (int)TS-410IML-HD Half dummy. P-410D
CS-410-8IML Passage set. P-410IML (ext) P-410IML (int)CS-410-8IML-PR Privacy set. P-410-8IML-ERC (ext) P-410-8IML-TPC (int)
TS-410IML Passage set. P-410IML (ext) P-410IML (int)TS-410IML-PR Privacy set. P-410IML-ERC (ext) P-410IML-TPC (int)TS-410IML-FD Full dummy. P-410D (ext) P-410D (int)TS-410IML-HD Half dummy. P-410D
TS-410-8IML Passage set. P-410IML (ext) P-410IML (int)TS-410-8IML-PR Privacy set. P-410-8IML-ERC (ext) P-410-8IML-TPC (int)
Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m
PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.
14-86
Revised 02/08/16
Illustrations are for demonstration purposes only. Any knob, lever or ring pull can be combined with any style or size escutcheon plate.
Complete sets with interior mortise lock and spindle. 2 1/4” center-to-center. (Shown)
Trim sets for interior mortise locks with spindle, no lock included. 2 1/4” center-to-center. (Shown)
Complete sets with interior mortise lock and spindle. 2 7/8” center-to-center.
Trim sets for interior mortise locks with spindle, no lock included. 2 7/8” center-to-center.
2 1/2” or 2 3/4” backset standard.Custom backsets available. Call for options and pricing.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.
F410 BEVEL EDGE INTERIOR MORTISE LOCK PASSAGE & PRIVACY SETS
CS-F410IML – Complete passage set with interior
mortise lock and spindle. OR TS-F410IML – Trim set only. No lock.
CS-F410IML-PR – Complete privacy set with interior
mortise lock and spindle. OR TS-F410IML-PR – Trim set only. No lock.
TS-F410IML-FD – Trim set only. – Full dummy.
TS-F410IML-HD – Trim set only. – Half dummy.
10"
3" 3"
10"
3" 3"
10"
3" 3"
10"
3"
6 3/
4"
6 3/
4"
6 3/
4"
6 3/
4"
6 3/
4"
2 1/
4"
6 3/
4"
Specify manufacturer & function of interior mortise lock.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.
CS-F410IML Passage set. P-F410IML (ext) P-F410IML (int)CS-F410IML-PR Privacy set. P-F410IML-ERC (ext) P-F410IML-TPC (int)TS-F410IML-FD Full dummy. P-F410D (ext) P-F410D (int)TS-F410IML-HD Half dummy. P-F410D
CS-F410-8IML Passage set. P-F410IML (ext) P-F410IML (int)CS-F410-8IML-PR Privacy set. P-F410-8IML-ERC (ext) P-F410-8IML-TPC (int)
TS-F410IML Passage set. P-F410IML (ext) P-F410IML (int)TS-F410IML-PR Privacy set. P-F410IML-ERC (ext) P-F410IML-TPC (int)TS-F410IML-FD Full dummy. P-F410D (ext) P-F410D (int)TS-F410IML-HD Half dummy. P-F410D
TS-F410-8IML Passage set. P-F410IML (ext) P-F410IML (int)TS-F410-8IML-PR Privacy set. P-F410-8IML-ERC (ext) P-F410-8IML-TPC (int)
Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m
PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.
14-87
Revised 02/08/16
Illustrations are for demonstration purposes only. Any knob, lever or ring pull can be combined with any style or size escutcheon plate.
Trim sets for interior mortise locks with spindle, no lock included. 2 1/4” center-to-center. (Shown)
Complete sets with interior mortise lock and spindle. 2 7/8” center-to-center.
Trim sets for interior mortise locks with spindle, no lock included. 2 7/8” center-to-center.
2 1/2” or 2 3/4” backset standard.Custom backsets available. Call for options and pricing.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.
Complete sets with interior mortise lock and spindle. 2 1/4” center-to-center. (Shown)
601 BEVEL EDGE INTERIOR MORTISE LOCK PASSAGE & PRIVACY SETS
CS-601IML – Complete passage set with interior
mortise lock and spindle. OR TS-601IML – Trim set only. No lock.
CS-601IML-PR – Complete privacy set with interior
mortise lock and spindle. OR TS-601IML-PR – Trim set only. No lock.
TS-601IML-FD – Trim set only. – Full dummy.
TS-601IML-HD – Trim set only. – Half dummy.
13"
3" 3"
13"
3" 3"
13"
3" 3"
13"
3"
4 1/
2"
4 1/
2"
4 1/
2"
4 1/
2"
4 1/
2"
4 1/
2"
2 1/
4"
4 1/
2"2
1/4"
Specify manufacturer & function of interior mortise lock.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.
CS-601IML Passage set. P-601IML (ext) P-601IML (int)CS-601IML-PR Privacy set. P-601IML-ERC (ext) P-601IML-TPC (int)TS-601IML-FD Full dummy. P-601D (ext) P-601D (int)TS-601IML-HD Half dummy. P-601D
CS-601-8IML Passage set. P-601IML (ext) P-601IML (int)CS-601-8IML-PR Privacy set. P-601-8IML-ERC (ext) P-601-8IML-TPC (int)
TS-601IML Passage set. P-601IML (ext) P-601IML (int)TS-601IML-PR Privacy set. P-601IML-ERC (ext) P-601IML-TPC (int)TS-601IML-FD Full dummy. P-601D (ext) P-601D (int)TS-601IML-HD Half dummy. P-601D
TS-601-8IML Passage set. P-601IML (ext) P-601IML (int)TS-601-8IML-PR Privacy set. P-601-8IML-ERC (ext) P-601-8IML-TPC (int)
Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m
PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.
14-88
Revised 02/08/16
Illustrations are for demonstration purposes only. Any knob, lever or ring pull can be combined with any style or size escutcheon plate.
Trim sets for interior mortise locks with spindle, no lock included. 2 1/4” center-to-center. (Shown)
Complete sets with interior mortise lock and spindle. 2 7/8” center-to-center.
Trim sets for interior mortise locks with spindle, no lock included. 2 7/8” center-to-center.
2 1/2” or 2 3/4” backset standard.Custom backsets available. Call for options and pricing.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.
Complete sets with interior mortise lock and spindle. 2 1/4” center-to-center. (Shown)
F601 BEVEL EDGE INTERIOR MORTISE LOCK PASSAGE & PRIVACY SETS
CS-F601IML – Complete passage set with interior
mortise lock and spindle. OR TS-F601IML – Trim set only. No lock.
CS-F601IML-PR – Complete privacy set with interior
mortise lock and spindle. OR TS-F601IML-PR – Trim set only. No lock.
TS-F601IML-FD – Trim set only. – Full dummy.
TS-F601IML-HD – Trim set only. – Half dummy.
13"
3" 3"
13"
3" 3"
13"
3" 3"
13"
3"
8 1/
2"
8 1/
2"
8 1/
2"
8 1/
2"
8 1/
2"
8 1/
2"
2 1/
4"
Specify manufacturer & function of interior mortise lock.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.
CS-F601IML Passage set. P-F601IML (ext) P-F601IML (int)CS-F601IML-PR Privacy set. P-F601IML-ERC (ext) P-F601IML-TPC (int)TS-F601IML-FD Full dummy. P-F601D (ext) P-F601D (int)TS-F601IML-HD Half dummy. P-F601D
CS-F601-8IML Passage set. P-F601IML (ext) P-F601IML (int)CS-F601-8IML-PR Privacy set. P-F601-8IML-ERC (ext) P-F601-8IML-TPC (int)
TS-F601IML Passage set. P-F601IML (ext) P-F601IML (int)TS-F601IML-PR Privacy set. P-F601IML-ERC (ext) P-F601IML-TPC (int)TS-F601IML-FD Full dummy. P-F601D (ext) P-F601D (int)TS-F601IML-HD Half dummy. P-F601D
TS-F601-8IML Passage set. P-F601IML (ext) P-F601IML (int)TS-F601-8IML-PR Privacy set. P-F601-8IML-ERC (ext) P-F601-8IML-TPC (int)
Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m
PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.
14-89
Revised 02/08/16
Illustrations are for demonstration purposes only. Any knob, lever or ring pull can be combined with any style or size escutcheon plate.
Trim sets for interior mortise locks with spindle, no lock included. 2 1/4” center-to-center. (Shown)
Complete sets with interior mortise lock and spindle. 2 7/8” center-to-center.
Trim sets for interior mortise locks with spindle, no lock included. 2 7/8” center-to-center.
2 1/2” or 2 3/4” backset standard.Custom backsets available. Call for options and pricing.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.
Complete sets with interior mortise lock and spindle. 2 1/4” center-to-center. (Shown)
602 BEVEL EDGE INTERIOR MORTISE LOCK PASSAGE & PRIVACY SETS
CS-602IML – Complete passage set with interior
mortise lock and spindle. OR TS-602IML – Trim set only. No lock.
CS-602IML-PR – Complete privacy set with interior
mortise lock and spindle. OR TS-602IML-PR – Trim set only. No lock.
TS-602IML-FD – Trim set only. – Full dummy.
TS-602IML-HD – Trim set only. – Half dummy.
13"
3 1/2" 3 1/2"
13"
3 1/2" 3 1/2"
13"
3 1/2" 3 1/2"
13"
3 1/2"
4 1/
2"
4 1/
2"
4 1/
2"
4 1/
2"
4 1/
2"
4 1/
2"
2 1/
4"
4 1/
2"2
1/4"
Specify manufacturer & function of interior mortise lock.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.
CS-602IML Passage set. P-602IML (ext) P-602IML (int)CS-602IML-PR Privacy set. P-602IML-ERC (ext) P-602IML-TPC (int)TS-602IML-FD Full dummy. P-602D (ext) P-602D (int)TS-602IML-HD Half dummy. P-602D
CS-602-8IML Passage set. P-602IML (ext) P-602IML (int)CS-602-8IML-PR Privacy set. P-602-8IML-ERC (ext) P-602-8IML-TPC (int)
TS-602IML Passage set. P-602IML (ext) P-602IML (int)TS-602IML-PR Privacy set. P-602IML-ERC (ext) P-602IML-TPC (int)TS-602IML-FD Full dummy. P-602D (ext) P-602D (int)TS-602IML-HD Half dummy. P-602D
TS-602-8IML Passage set. P-602IML (ext) P-602IML (int)TS-602-8IML-PR Privacy set. P-602-8IML-ERC (ext) P-602-8IML-TPC (int)
Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m
PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.
14-90
Revised 02/08/16
Illustrations are for demonstration purposes only. Any knob, lever or ring pull can be combined with any style or size escutcheon plate.
Trim sets for interior mortise locks with spindle, no lock included. 2 1/4” center-to-center. (Shown)
Complete sets with interior mortise lock and spindle. 2 7/8” center-to-center.
Trim sets for interior mortise locks with spindle, no lock included. 2 7/8” center-to-center.
2 1/2” or 2 3/4” backset standard.Custom backsets available. Call for options and pricing.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.
Complete sets with interior mortise lock and spindle. 2 1/4” center-to-center. (Shown)
F602 BEVEL EDGE INTERIOR MORTISE LOCK PASSAGE & PRIVACY SETS
CS-F602IML – Complete passage set with interior
mortise lock and spindle. OR TS-F602IML – Trim set only. No lock.
CS-F602IML-PR – Complete privacy set with interior
mortise lock and spindle. OR TS-F602IML-PR – Trim set only. No lock.
TS-F602IML-FD – Trim set only. – Full dummy.
TS-F602IML-HD – Trim set only. – Half dummy.
13"
3 1/2" 3 1/2"
13"
3 1/2" 3 1/2"
13"
3 1/2" 3 1/2"
13"
3 1/2"
8 1/
2"
8 1/
2"
8 1/
2"
8 1/
2"
8 1/
2"
2 1/
4"
8 1/
2"
Specify manufacturer & function of interior mortise lock.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.
CS-F602IML Passage set. P-F602IML (ext) P-F602IML (int)CS-F602IML-PR Privacy set. P-F602IML-ERC (ext) P-F602IML-TPC (int)TS-F602IML-FD Full dummy. P-F602D (ext) P-F602D (int)TS-F602IML-HD Half dummy. P-F602D
CS-F602-8IML Passage set. P-F602IML (ext) P-F602IML (int)CS-F602-8IML-PR Privacy set. P-F602-8IML-ERC (ext) P-F602-8IML-TPC (int)
TS-F602IML Passage set. P-F602IML (ext) P-F602IML (int).TS-F602IML-PR Privacy set. P-F602IML-ERC (ext) P-F602IML-TPC (int)TS-F602IML-FD Full dummy. P-F602D (ext) P-F602D (int)TS-F602IML-HD Half dummy. P-F602D
TS-F602-8IML Passage set. P-F602IML (ext) P-F602IML (int)TS-F602-8IML-PR Privacy set. P-F602-8IML-ERC (ext) P-F602-8IML-TPC (int)
Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m
PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.
14-91
Revised 02/08/16
Illustrations are for demonstration purposes only. Any knob, lever or ring pull can be combined with any style or size escutcheon plate.
Complete sets with interior mortise lock and spindle. 2 1/4” center-to-center. (Shown)
Trim sets for interior mortise locks with spindle, no lock included. 2 1/4” center-to-center. (Shown)
Complete sets with interior mortise lock and spindle. 2 7/8” center-to-center.
Trim sets for interior mortise locks with spindle, no lock included. 2 7/8” center-to-center.
2 1/2” or 2 3/4” backset standard.Custom backsets available. Call for options and pricing.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.
811 BEVEL EDGE INTERIOR MORTISE LOCK PASSAGE & PRIVACY SETS
CS-811IML – Complete passage set with interior
mortise lock and spindle. OR TS-811IML – Trim set only. No lock.
CS-811IML-PR – Complete privacy set with interior
mortise lock and spindle. OR TS-811IML-PR – Trim set only. No lock.
TS-811IML-FD – Trim set only. – Full dummy.
TS-811IML-HD – Trim set only. – Half dummy.
10 1
/2"
1 1/2" 1 1/2"
10 1
/2"
1 1/2" 1 1/2"
10 1
/2"
1 1/2" 1 1/2"
10 1
/2"
1 1/2"
4" 4" 4" 4" 4" 4"
2 1/
4"
4"2
1/4"
Specify manufacturer & function of interior mortise lock.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.
CS-811IML Passage set. P-811 (ext) P-811 (int)CS-811IML-PR Privacy set. P-811IML-ERC (ext) P-811IML-TPC (int)TS-811IML-FD Full dummy. P-811D (ext) P-811D (int)TS-811IML-HD Half dummy. P-811D
CS-811-8IML Passage set. P-811 (ext) P-811 (int)CS-811-8IML-PR Privacy set. P-811-8IML-ERC (ext) P-811-8IML-TPC (int)
TS-811IML Passage set. P-811 (ext) P-811 (int)TS-811IML-PR Privacy set. P-811IML-ERC (ext) P-811IML-TPC (int)TS-811IML-FD Full dummy. P-811D (ext) P-811D (int)TS-811IML-HD Half dummy. P-811D
TS-811-8IML Passage set. P-811 (ext) P-811 (int)TS-811-8IML-PR Privacy set. P-811-8IML-ERC (ext) P-811-8IML-TPC (int)
Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m
PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.
14-92
Revised 02/08/16
Illustrations are for demonstration purposes only. Any knob, lever or ring pull can be combined with any style or size escutcheon plate.
Complete sets with interior mortise lock and spindle. 2 1/4” center-to-center. (Shown)
Trim sets for interior mortise locks with spindle, no lock included. 2 1/4” center-to-center. (Shown)
Complete sets with interior mortise lock and spindle. 2 7/8” center-to-center.
Trim sets for interior mortise locks with spindle, no lock included. 2 7/8” center-to-center.
2 1/2” or 2 3/4” backset standard.Custom backsets available. Call for options and pricing.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.
F811 BEVEL EDGE INTERIOR MORTISE LOCK PASSAGE & PRIVACY SETS
CS-F811IML – Complete passage set with interior
mortise lock and spindle. OR TS-F811IML – Trim set only. No lock.
CS-F811IML-PR – Complete privacy set with interior
mortise lock and spindle. OR TS-F811IML-PR – Trim set only. No lock.
TS-F811IML-FD – Trim set only. – Full dummy.
TS-F811IML-HD – Trim set only. – Half dummy.
10 1
/2"
1 1/2" 1 1/2"
10 1
/2"
1 1/2" 1 1/2"
10 1
/2"
1 1/2" 1 1/2"
10 1
/2"
1 1/2"
6 1/
2"
6 1/
2"
6 1/
2"
6 1/
2"
6 1/
2"
2 1/
4"
6 1/
2"
Specify manufacturer & function of interior mortise lock.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.
CS-F811IML Passage set. P-F811 (ext) P-F811 (int)CS-F811IML-PR Privacy set. P-F811IML-ERC (ext) P-F811IML-TPC (int)TS-F811IML-FD Full dummy. P-F811D (ext) P-F811D (int)TS-F811IML-HD Half dummy. P-F811D
CS-F811-8IML Passage set. P-F811 (ext) P-F811 (int)CS-F811-8IML-PR Privacy set. P-F811-8IML-ERC (ext) P-F811-8IML-TPC (int)
TS-F811IML Passage set. P-F811 (ext) P-F811 (int)TS-F811IML-PR Privacy set. P-F811IML-ERC (ext) P-F811IML-TPC (int)TS-F811IML-FD Full dummy. P-F811D (ext) P-F811D (int)TS-F811IML-HD Half dummy. P-F811D
TS-F811-8IML Passage set. P-F811 (ext) P-F811 (int)TS-F811-8IML-PR Privacy set. P-F811-8IML-ERC (ext) P-F811-8IML-TPC (int)
Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m
PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.
14-93
Revised 02/08/16
Illustrations are for demonstration purposes only. Any knob, lever or ring pull can be combined with any style or size escutcheon plate.
Complete sets with interior mortise lock and spindle. 2 1/4” center-to-center. (Shown)
Trim sets for interior mortise locks with spindle, no lock included. 2 1/4” center-to-center. (Shown)
Complete sets with interior mortise lock and spindle. 2 7/8” center-to-center.
Trim sets for interior mortise locks with spindle, no lock included. 2 7/8” center-to-center.
2 1/2” or 2 3/4” backset standard.Custom backsets available. Call for options and pricing.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.
A405 ARCH INTERIOR MORTISE LOCK PASSAGE & PRIVACY SETS
CS-A405IML – Complete passage set with interior
mortise lock and spindle. OR TS-A405IML – Trim set only. No lock.
CS-A405IML-PR – Complete privacy set with interior
mortise lock and spindle. OR TS-A405IML-PR – Trim set only. No lock.
TS-A405IML-FD – Trim set only. – Full dummy.
TS-A405IML-HD – Trim set only. – Half dummy.
7 1/
2"1 3/4" 1 3/4"
7 1/
2"
1 3/4" 1 3/4"
7 1/
2"
1 3/4" 1 3/4"
7 1/
2"
1 3/4"
2 1/
4"
2 1/
4"
2 1/
4"
2 1/
4"
2 1/
4"
2 1/
4"
2 1/
4"
2 1/
4"2
1/4"
Specify manufacturer & function of interior mortise lock.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.
CS-A405IML Passage set. P-A405OH (ext) P-A405OH (int)CS-A405IML-PR Privacy set. P-A405OH-IML-ERC (ext) P-A405OH-IML-TPC (int)TS-A405IML-FD Full dummy. P-A405OH-D (ext) P-A405OH-D (int)TS-A405IML-HD Half dummy. P-A405OH-D
CS-A405-8IML Passage set. P-A405OH (ext) P-A405OH (int)CS-A405-8IML-PR Privacy set. P-A405OH-8IML-ERC (ext) P-A405OH-8IML-TPC (int)
TS-A405IML Passage set. P-A405OH (ext) P-A405OH (int)TS-A405IML-PR Privacy set. P-A405OH-IML-ERC (ext) P-A405OH-IML-TPC (int)TS-A405IML-FD Full dummy. P-A405OH-D (ext) P-A405OH-D (int)TS-A405IML-HD Half dummy. P-A405OH-D
TS-A405-8IML Passage set. P-A405OH (ext) P-A405OH (int)TS-A405-8IML-PR Privacy set. P-A405OH-8IML-ERC (ext) P-A405OH-8IML-TPC (int)
Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m
PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.
14-94
Revised 02/08/16
Illustrations are for demonstration purposes only. Any knob, lever or ring pull can be combined with any style or size escutcheon plate.
Complete sets with interior mortise lock and spindle. 2 1/4” center-to-center. (Shown)
Trim sets for interior mortise locks with spindle, no lock included. 2 1/4” center-to-center. (Shown)
Complete sets with interior mortise lock and spindle. 2 7/8” center-to-center.
Trim sets for interior mortise locks with spindle, no lock included. 2 7/8” center-to-center.
2 1/2” or 2 3/4” backset standard.Custom backsets available. Call for options and pricing.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.
F-A405 ARCH INTERIOR MORTISE LOCK PASSAGE & PRIVACY SETS
CS-F-A405IML – Complete passage set with interior
mortise lock and spindle. OR TS-F-A405IML – Trim set only. No lock.
CS-F-A405IML-PR – Complete privacy set with interior
mortise lock and spindle. OR TS-F-A405IML-PR – Trim set only. No lock.
TS-F-A405IML-FD – Trim set only. – Full dummy.
TS-F-A405IML-HD – Trim set only. – Half dummy.
7 1/
2"1 3/4" 1 3/4"
7 1/
2"
1 3/4" 1 3/4"
7 1/
2"
1 3/4" 1 3/4"
7 1/
2"
1 3/4"
5 1/
4"
5 1/
4"
5 1/
4"
5 1/
4"
5 1/
4"2 1/
4"
5 1/
4"
Specify manufacturer & function of interior mortise lock.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.
CS-F-A405IML Passage set. P-F-A405OH (ext) P-F-A405OH (int)CS-F-A405IML-PR Privacy set. P-F-A405OH-IML-ERC (ext) P-F-A405OH-IML-TPC (int)TS-F-A405IML-FD Full dummy. P-F-A405OH-D (ext) P-F-A405OH-D (int)TS-F-A405IML-HD Half dummy. P-F-A405OH-D
CS-F-A405-8IML Passage set. P-F-A405OH (ext) P-F-A405OH (int)CS-F-A405-8IML-PR Privacy set. P-F-A405OH-8IML-ERC (ext) P-F-A405OH-8IML-TPC (int)
TS-F-A405IML Passage set. P-F-A405OH (ext) P-F-A405OH (int)TS-F-A405IML-PR Privacy set. P-F-A405OH-IML-ERC (ext) P-F-A405OH-IML-TPC (int)TS-F-A405IML-FD Full dummy. P-F-A405OH-D (ext) P-F-A405OH-D (int)TS-F-A405IML-HD Half dummy. P-F-A405OH-D
TS-F-A405-8IML Passage set. P-F-A405OH (ext) P-F-A405OH (int)TS-F-A405-8IML-PR Privacy set. P-F-A405OH-8IML-ERC (ext) P-F-A405OH-8IML-TPC (int)
Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m
PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.
14-95
Revised 02/08/16
Illustrations are for demonstration purposes only. Any knob, lever or ring pull can be combined with any style or size escutcheon plate.
Complete sets with interior mortise lock and spindle. 2 1/4” center-to-center. (Shown)
Trim sets for interior mortise locks with spindle, no lock included. 2 1/4” center-to-center. (Shown)
Complete sets with interior mortise lock and spindle. 2 7/8” center-to-center.
Trim sets for interior mortise locks with spindle, no lock included. 2 7/8” center-to-center.
2 1/2” or 2 3/4” backset standard.Custom backsets available. Call for options and pricing.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.
A406 ARCH INTERIOR MORTISE LOCK PASSAGE & PRIVACY SETS
CS-A406IML – Complete passage set with interior
mortise lock and spindle. OR TS-A406IML – Trim set only. No lock.
CS-A406IML-PR – Complete privacy set with interior
mortise lock and spindle. OR TS-A406IML-PR – Trim set only. No lock.
TS-A406IML-FD – Trim set only. – Full dummy.
TS-406IML-HD – Trim set only. – Half dummy.
7 1/
2"
2 1/2" 2 1/2"
7 1/
2"
2 1/2" 2 1/2"
7 1/
2"
2 1/2" 2 1/2"
7 1/
2"
2 1/2"
2 1/
4"
2 1/
4"
2 1/
4"
2 1/
4"
2 1/
4"
2 1/
4"
2 1/
4"
2 1/
4"2
1/4"
Specify manufacturer & function of interior mortise lock.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.
CS-A406IML Passage set. P-A406OH (ext) P-A406OH (int)CS-A406IML-PR Privacy set. P-A406OH-IML-ERC (ext) P-A406OH-IML-TPC (int)TS-A406IML-FD Full dummy. P-A406OH-D (ext) P-A406OH-D (int)TS-A406IML-HD Half dummy. P-A406OH-D
CS-A406-8IML Passage set. P-A406OH (ext) P-A406OH (int)CS-A406-8IML-PR Privacy set. P-A406OH-8IML-ERC (ext) P-A406OH-8IML-TPC (int)
TS-A406IML Passage set. P-A406OH (ext) P-A406OH (int)TS-A406IML-PR Privacy set. P-A406OH-IML-ERC (ext) P-A406OH-IML-TPC (int)TS-A406IML-FD Full dummy. P-A406OH-D (ext) P-A406OH-D (int)TS-A406IML-HD Half dummy. P-A406OH-D
TS-A406-8IML Passage set. P-A406OH (ext) P-A406OH (int)TS-A406-8IML-PR Privacy set. P-A406OH-8IML-ERC (ext) P-A406OH-8IML-TPC (int)
Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m
PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.
14-96
Revised 02/08/16
Illustrations are for demonstration purposes only. Any knob, lever or ring pull can be combined with any style or size escutcheon plate.
Complete sets with interior mortise lock and spindle. 2 1/4” center-to-center. (Shown)
Trim sets for interior mortise locks with spindle, no lock included. 2 1/4” center-to-center. (Shown)
Complete sets with interior mortise lock and spindle. 2 7/8” center-to-center.
Trim sets for interior mortise locks with spindle, no lock included. 2 7/8” center-to-center.
2 1/2” or 2 3/4” backset standard.Custom backsets available. Call for options and pricing.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.
F-A406 ARCH INTERIOR MORTISE LOCK PASSAGE & PRIVACY SETS
CS-F-A406IML – Complete passage set with interior
mortise lock and spindle. OR TS-F-A406IML – Trim set only. No lock.
CS-F-A406IML-PR – Complete privacy set with interior
mortise lock and spindle. OR TS-F-A406IML-PR – Trim set only. No lock.
TS-F-A406IML-FD – Trim set only. – Full dummy.
TS-F-A406IML-HD – Trim set only. – Half dummy.
7 1/
2"2 1/2" 2 1/2"
7 1/
2"
2 1/2" 2 1/2"
7 1/
2"
2 1/2" 2 1/2"
7 1/
2"
2 1/2"
5 1/
4"
5 1/
4"
5 1/
4"
5 1/
4"
5 1/
4"
5 1/
4" 2 1/
4"
Specify manufacturer & function of interior mortise lock.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.
CS-F-A406IML Passage set. P-F-A406OH (ext) P-F-A406OH (int)CS-F-A406IML-PR Privacy set. P-F-A406IML-ERC (ext) P-F-A406IML-TPC (int)TS-F-A406IML-FD Full dummy. P-F-A406OH-D (ext) P-F-A406OH-D (int)TS-F-A406IML-HD Half dummy. P-F-A406OH-D
CS-F-A406-8IML Passage set. P-F-A406OH (ext) P-F-A406OH (int)CS-F-A406-8IML-PR Privacy set. P-F-A406OH-8IML-ERC (ext) P-F-A406OH-8IML-TPC (int)
TS-F-A406IML Passage set. P-F-A406OH (ext) P-F-A406OH (int)TS-F-A406IML-PR Privacy set. P-F-A406OH-IML-ERC (ext) P-F-A406OH-IML-TPC (int)TS-F-A406IML-FD Full dummy. P-F-A406OH-D (ext) P-F-A406OH-D (int)TS-F-A406IML-HD Half dummy. P-F-A406OH-D
TS-F-A406-8IML Passage set. P-F-A406OH (ext) P-F-A406OH (int)TS-F-A406-8IML-PR Privacy set. P-F-A406OH-8IML-ERC (ext) P-F-A406OH-8IML-TPC (int)
Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m
PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.
14-97
Revised 02/08/16
Illustrations are for demonstration purposes only. Any knob, lever or ring pull can be combined with any style or size escutcheon plate.
Trim sets for interior mortise locks with spindle, no lock included. 2 1/4” center-to-center. (Shown)
Complete sets with interior mortise lock and spindle. 2 7/8” center-to-center.
Trim sets for interior mortise locks with spindle, no lock included. 2 7/8” center-to-center.
2 1/2” or 2 3/4” backset standard.Custom backsets available. Call for options and pricing.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.
Complete sets with interior mortise lock and spindle. 2 1/4” center-to-center. (Shown)
A407 ARCH INTERIOR MORTISE LOCK PASSAGE & PRIVACY SETS
CS-A407IML – Complete passage set with interior
mortise lock and spindle. OR TS-A407IML – Trim set only. No lock.
CS-A407IML-PR – Complete privacy set with interior
mortise lock and spindle. OR TS-A407IML-PR – Trim set only. No lock.
TS-A407IML-FD – Trim set only. – Full dummy.
TS-A407IML-HD – Trim set only. – Half dummy.
8 3/
4"
2" 2"
8 3/
4"
2" 2"
8 3/
4"
2" 2"
8 3/
4"
2"
2 3/
4"
2 3/
4"
2 3/
4"
2 3/
4"
2 3/
4"
2 3/
4"
2 1/
4"
2 3/
4"2
1/4"
Specify manufacturer & function of interior mortise lock.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.
CS-A407IML Passage set. P-A407 (ext) P-A407 (int)CS-A407IML-PR Privacy set. P-A407IML-ERC (ext) P-A407IML-TPC (int)TS-A407IML-FD Full dummy. P-A407D (ext) P-A407D (int)TS-A407IML-HD Half dummy. P-A407D
CS-A407-8IML Passage set. P-A407 (ext) P-A407 (int)CS-A407-8IML-PR Privacy set. P-A407-8IML-ERC (ext) P-A407-8IML-TPC (int)
TS-A407IML Passage set. P-A407 (ext) P-A407 (int)TS-A407IML-PR Privacy set. P-A407IML-ERC (ext) P-A407IML-TPC (int)TS-A407IML-FD Full dummy. P-A407D (ext) P-A407D (int)TS-A407IML-HD Half dummy. P-A407D
TS-A407-8IML Passage set. P-A407 (ext) P-A407 (int)TS-A407-8IML-PR Privacy set. P-A407-8IML-ERC (ext) P-A407-8IML-TPC (int)
Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m
PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.
14-98
Revised 02/08/16
Illustrations are for demonstration purposes only. Any knob, lever or ring pull can be combined with any style or size escutcheon plate.
Complete sets with interior mortise lock and spindle. 2 1/4” center-to-center. (Shown)
Trim sets for interior mortise locks with spindle, no lock included. 2 1/4” center-to-center. (Shown)
Complete sets with interior mortise lock and spindle. 2 7/8” center-to-center.
Trim sets for interior mortise locks with spindle, no lock included. 2 7/8” center-to-center.
2 1/2” or 2 3/4” backset standard.Custom backsets available. Call for options and pricing.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.
F-A407 ARCH INTERIOR MORTISE LOCK PASSAGE & PRIVACY SETS
CS-F-A407IML – Complete passage set with interior
mortise lock and spindle. OR TS-F-A407IML – Trim set only. No lock.
CS-F-A407IML-PR – Complete privacy set with interior
mortise lock and spindle. OR TS-F-A407IML-PR – Trim set only. No lock.
TS-F-A407IML-FD – Trim set only. – Full dummy.
TS-F-A407IML-HD – Trim set only. – Half dummy.
8 3/
4"2" 2"
8 3/
4"
2" 2"
8 3/
4"
2" 2"
8 3/
4"
2"
6"6" 6"6" 6"6"
2 1/
4"
Specify manufacturer & function of interior mortise lock.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.
CS-F-A407IML Passage set. P-F-A407 (ext) P-F-A407 (int)CS-F-A407IML-PR Privacy set. P-F-A407IML-ERC (ext) P-F-A407IML-TPC (int)TS-F-A407IML-FD Full dummy. P-F-A407D (ext) P-F-A407D (int)TS-F-A407IML-HD Half dummy. P-F-A407D
CS-F-A407-8IML Passage set. P-F-A407 (ext) P-F-A407 (int)CS-F-A407-8IML-PR Privacy set. P-F-A407-8IML-ERC (ext) P-F-A407-8IML-TPC (int)
TS-F-A407IML Passage set. P-F-A407 (ext) P-F-A407 (int)TS-F-A407IML-PR Privacy set. P-F-A407IML-ERC (ext) P-F-A407IML-TPC (int)TS-F-A407IML-FD Full dummy. P-F-A407D (ext) P-F-A407D (int)TS-F-A407IML-HD Half dummy. P-F-A407D
TS-F-A407-8IML Passage set. P-F-A407 (ext) P-F-A407 (int)TS-F-A407-8IML-PR Privacy set. P-F-A407-8IML-ERC (ext) P-F-A407-8IML-TPC (int)
Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m
PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.
14-99
Revised 02/08/16
Illustrations are for demonstration purposes only. Any knob, lever or ring pull can be combined with any style or size escutcheon plate.
Complete sets with interior mortise lock and spindle. 2 1/4” center-to-center. (Shown)
Trim sets for interior mortise locks with spindle, no lock included. 2 1/4” center-to-center. (Shown)
Complete sets with interior mortise lock and spindle. 2 7/8” center-to-center.
Trim sets for interior mortise locks with spindle, no lock included. 2 7/8” center-to-center.
2 1/2” or 2 3/4” backset standard.Custom backsets available. Call for options and pricing.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.
A408 ARCH INTERIOR MORTISE LOCK PASSAGE & PRIVACY SETS
CS-A408IML – Complete passage set with interior
mortise lock and spindle. OR TS-A408IML – Trim set only. No lock.
CS-A408IML-PR – Complete privacy set with interior
mortise lock and spindle. OR TS-A408IML-PR – Trim set only. No lock.
TS-A408IML-FD – Trim set only. – Full dummy.
TS-A408IML-HD – Trim set only. – Half dummy.
9 1/
4"
2 1/2" 2 1/2"
9 1/
4"
2 1/2" 2 1/2"
9 1/
4"
2 1/2" 2 1/2"
9 1/
4"
2 1/2"
2 1/
2"
2 1/
2"
2 1/
2"
2 1/
2"
2 1/
2"
2 1/
2"
2 1/
4"
2 1/
2"2
1/4"
Specify manufacturer & function of interior mortise lock.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.
CS-A408IML Passage set. P-A408 (ext) P-A408 (int)CS-A408IML-PR Privacy set. P-A408IML-ERC (ext) P-A408IML-TPC (int)TS-A408IML-FD Full dummy. P-A408D (ext) P-A408D (int)TS-A408IML-HD Half dummy. P-A408D
CS-A408-8IML Passage set. P-A408 (ext) P-A408 (int)CS-A408-8IML-PR Privacy set. P-A408-8IML-ERC (ext) P-A408-8IML-TPC (int)
TS-A408IML Passage set. P-A408 (ext) P-A408 (int)TS-A408IML-PR Privacy set. P-A408IML-ERC (ext) P-A408IML-TPC (int)TS-A408IML-FD Full dummy. P-A408D (ext) P-A408D (int)TS-A408IML-HD Half dummy. P-A408D
TS-A408-8IML Passage set. P-A408 (ext) P-A408 (int)TS-A408-8IML-PR Privacy set. P-A408-8IML-ERC (ext) P-A408-8IML-TPC (int)
Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m
PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.
14-100
Revised 02/08/16
Illustrations are for demonstration purposes only. Any knob, lever or ring pull can be combined with any style or size escutcheon plate.
Complete sets with interior mortise lock and spindle. 2 1/4” center-to-center. (Shown)
Trim sets for interior mortise locks with spindle, no lock included. 2 1/4” center-to-center. (Shown)
Complete sets with interior mortise lock and spindle. 2 7/8” center-to-center.
Trim sets for interior mortise locks with spindle, no lock included. 2 7/8” center-to-center.
2 1/2” or 2 3/4” backset standard.Custom backsets available. Call for options and pricing.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.
F-A408 ARCH INTERIOR MORTISE LOCK PASSAGE & PRIVACY SETS
CS-F-A408IML – Complete passage set with interior
mortise lock and spindle. OR TS-F-A408IML – Trim set only. No lock.
CS-F-A408IML-PR – Complete privacy set with interior
mortise lock and spindle. OR TS-F-A408IML-PR – Trim set only. No lock.
TS-F-A408IML-FD – Trim set only. – Full dummy.
TS-F-A408IML-HD – Trim set only. – Half dummy.
9 1/
4"
2 1/2" 2 1/2"
9 1/
4"
2 1/2" 2 1/2"
9 1/
4"
2 1/2" 2 1/2"
9 1/
4"
2 1/2"
6 3/
4"
6 3/
4"
6 3/
4"
6 3/
4"
6 3/
4"
6 3/
4"
2 1/
4"
Specify manufacturer & function of interior mortise lock.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.
CS-F-A408IML Passage set. P-F-A408 (ext) P-F-A408 (int)CS-F-A408IML-PR Privacy set. P-F-A408IML-ERC (ext) P-F-A408IML-TPC (int)TS-F-A408IML-FD Full dummy. P-F-A408D (ext) P-F-A408D (int)TS-F-A408IML-HD Half dummy. P-F-A408D
CS-F-A408-8IML Passage set. P-F-A408 (ext) P-F-A408 (int)CS-F-A408-8IML-PR Privacy set. P-F-A408IML-ERC (ext) P-F-A408-8IML-TPC (int)
TS-F-A408IML Passage set. P-F-A408 (ext) P-F-A408 (int)TS-F-A408IML-PR Privacy set. P-F-A408IML-ERC (ext) P-F-A408IML-TPC (int)TS-F-A408IML-FD Full dummy. P-F-A408D (ext) P-F-A408D (int)TS-F-A408IML-HD Half dummy. P-F-A408D
TS-F-A408-8IML Passage set. P-F-A408 (ext) P-F-A408 (int)TS-F-A408-8IML-PR Privacy set. P-F-A408-8IML-ERC (ext) P-F-A408-8IML-TPC (int)
Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m
PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.
14-101
Revised 02/08/16
Illustrations are for demonstration purposes only. Any knob, lever or ring pull can be combined with any style or size escutcheon plate.
Complete sets with interior mortise lock and spindle. 2 1/4” center-to-center. (Shown)
Trim sets for interior mortise locks with spindle, no lock included. 2 1/4” center-to-center. (Shown)
Complete sets with interior mortise lock and spindle. 2 7/8” center-to-center.
Trim sets for interior mortise locks with spindle, no lock included. 2 7/8” center-to-center.
2 1/2” or 2 3/4” backset standard.Custom backsets available. Call for options and pricing.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.
A409 ARCH INTERIOR MORTISE LOCK PASSAGE & PRIVACY SETS
CS-A409IML – Complete passage set with interior
mortise lock and spindle. OR TS-A409IML – Trim set only. No lock.
CS-A409IML-PR – Complete privacy set with interior
mortise lock and spindle. OR TS-A409IML-PR – Trim set only. No lock.
TS-A409IML-FD – Trim set only. – Full dummy.
TS-A409IML-HD – Trim set only. – Half dummy.
11"
2 1/2" 2 1/2"
11"
2 1/2" 2 1/2"
11"
2 1/2" 2 1/2"
11"
2 1/2"
3 3/
4"
3 3/
4"
3 3/
4"
3 3/
4"
3 3/
4"
3 3/
4"
2 1/
4"
3 3/
4"2
1/4"
Specify manufacturer & function of interior mortise lock.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.
CS-A409IML Passage set. P-A409IML (ext) P-A409IML (int)CS-A409IML-PR Privacy set. P-A409IML-ERC (ext) P-A409IML-TPC (int)TS-A409IML-FD Full dummy. P-A409D (ext) P-A409D (int)TS-A409IML-HD Half dummy. P-A409D
CS-A409-8IML Passage set. P-A409IML (ext) P-A409IML (int)CS-A409-8IML-PR Privacy set. P-A409-8IML-ERC (ext) P-A409-8IML-TPC (int)
TS-A409IML Passage set. P-A409IML (ext) P-A409IML (int)TS-A409IML-PR Privacy set. P-A409IML-ERC (ext) P-A409IML-TPC (int)TS-A409IML-FD Full dummy. P-A409D (ext) P-A409D (int)TS-A409IML-HD Half dummy. P-A409D
TS-A409-8IML Passage set. P-A409IML (ext) P-A409IML (int)TS-A409-8IML-PR Privacy set. P-A409-8IML-ERC (ext) P-A409-8IML-TPC (int)
Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m
PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.
14-102
Revised 02/08/16
Illustrations are for demonstration purposes only. Any knob, lever or ring pull can be combined with any style or size escutcheon plate.
Complete sets with interior mortise lock and spindle. 2 1/4” center-to-center. (Shown)
Trim sets for interior mortise locks with spindle, no lock included. 2 1/4” center-to-center. (Shown)
Complete sets with interior mortise lock and spindle. 2 7/8” center-to-center.
Trim sets for interior mortise locks with spindle, no lock included. 2 7/8” center-to-center.
2 1/2” or 2 3/4” backset standard.Custom backsets available. Call for options and pricing.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.
F-A409 ARCH INTERIOR MORTISE LOCK PASSAGE & PRIVACY SETS
CS-F-A409IML – Complete passage set with interior
mortise lock and spindle. OR TS-F-A409IML – Trim set only. No lock.
CS-F-A409IML-PR – Complete privacy set with interior
mortise lock and spindle. OR TS-F-A409IML-PR – Trim set only. No lock.
TS-F-A409IML-FD – Trim set only. – Full dummy.
TS-F-A409IML-HD – Trim set only. – Half dummy.
11"
2 1/2" 2 1/2"
11"
2 1/2" 2 1/2"
11"
2 1/2" 2 1/2"
11"
2 1/2"
7 1/
4"
7 1/
4"
7 1/
4"
7 1/
4"
7 1/
4"
7 1/
4"
2 1/
4"
Specify manufacturer & function of interior mortise lock.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.
CS-F-A409IML Passage set. P-F-A409IML (ext) P-F-A409IML (int)CS-F-A409IML-PR Privacy set. P-F-A409IML-ERC (ext) P-F-A409IML-TPC (int)TS-F-A409IML-FD Full dummy. P-F-A409D (ext) P-F-A409D (int)TS-F-A409IML-HD Half dummy. P-F-A409D
CS-F-A409-8IML Passage set. P-F-A409IML (ext) P-F-A409IML (int)CS-F-A409-8IML-PR Privacy set. P-F-A409-8IML-ERC (ext) P-F-A409-8IML-TPC (int)
TS-F-A409IML Passage set. P-F-A409IML (ext) P-F-A409IML (int)TS-F-A409IML-PR Privacy set. P-F-A409IML-ERC (ext) P-F-A409IML-TPC (int)TS-F-A409IML-FD Full dummy. P-F-A409D (ext) P-F-A409D (int)TS-F-A409IML-HD Half dummy. P-F-A409D
TS-F-A409-8IML Passage set. P-F-A409IML (ext) P-F-A409IML (int)TS-F-A409-8IML-PR Privacy set. P-F-A409-8IML-ERC (ext) P-F-A409-8IML-TPC (int)
Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m
PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.
14-103
Revised 02/08/16
Illustrations are for demonstration purposes only. Any knob, lever or ring pull can be combined with any style or size escutcheon plate.
Complete sets with interior mortise lock and spindle. 2 1/4” center-to-center. (Shown)
Trim sets for interior mortise locks with spindle, no lock included. 2 1/4” center-to-center. (Shown)
Complete sets with interior mortise lock and spindle. 2 7/8” center-to-center.
Trim sets for interior mortise locks with spindle, no lock included. 2 7/8” center-to-center.
2 1/2” or 2 3/4” backset standard.Custom backsets available. Call for options and pricing.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.
A410 ARCH INTERIOR MORTISE LOCK PASSAGE & PRIVACY SETS
CS-A410IML – Complete passage set with interior
mortise lock and spindle. OR TS-A410IML – Trim set only. No lock.
CS-A410IML-PR – Complete privacy set with interior
mortise lock and spindle. OR TS-A410IML-PR – Trim set only. No lock.
TS-A410IML-FD – Trim set only. – Full dummy.
TS-A410IML-HD – Trim set only. – Half dummy.
11 1
/2"
3" 3"
11 1
/2"
3" 3"
11 1
/2"
3" 3"
11 1
/2"
3"
4"4" 4" 4"4" 4"
2 1/
4"
4"2
1/4"
Specify manufacturer & function of interior mortise lock.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.
CS-A410IML Passage set. P-A410IML (ext) P-A410IML (int)CS-A410IML-PR Privacy set. P-A410IML-ERC (ext) P-A410IML-TPC (int)TS-A410IML-FD Full dummy. P-A410D (ext) P-A410D (int)TS-A410IML-HD Half dummy. P-A410D
CS-A410-8IML Passage set. P-A410IML (ext) P-A410IML (int)CS-A410-8IML-PR Privacy set. P-A410-8IML-ERC (ext) P-A410-8IML-TPC (int)
TS-A410IML Passage set. P-A410IML (ext) P-A410IML (int)TS-A410IML-PR Privacy set. P-A410IML-ERC (ext) P-A410IML-TPC (int)TS-A410IML-FD Full dummy. P-A410D (ext) P-A410D (int)TS-A410IML-HD Half dummy. P-A410D
TS-A410-8IML Passage set. P-A410IML (ext) P-A410IML (int)TS-A410-8IML-PR Privacy set. P-A410-8IML-ERC (ext) P-A410-8IML-TPC (int)
Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m
PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.
14-104
Revised 02/08/16
Illustrations are for demonstration purposes only. Any knob, lever or ring pull can be combined with any style or size escutcheon plate.
Complete sets with interior mortise lock and spindle. 2 1/4” center-to-center. (Shown)
Trim sets for interior mortise locks with spindle, no lock included. 2 1/4” center-to-center. (Shown)
Complete sets with interior mortise lock and spindle. 2 7/8” center-to-center.
Trim sets for interior mortise locks with spindle, no lock included. 2 7/8” center-to-center.
2 1/2” or 2 3/4” backset standard.Custom backsets available. Call for options and pricing.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.
F-A410 ARCH INTERIOR MORTISE LOCK PASSAGE & PRIVACY SETS
CS-F-A410IML – Complete passage set with interior
mortise lock and spindle. OR TS-F-A410IML – Trim set only. No lock.
CS-F-A410IML-PR – Complete privacy set with interior
mortise lock and spindle. OR TS-F-A410IML-PR – Trim set only. No lock.
TS-F-A410IML-FD – Trim set only. – Full dummy.
TS-F-A410IML-HD – Trim set only. – Half dummy.
11 1
/2"
3" 3"
11 1
/2"
3" 3"
11 1
/2"
3" 3"
11 1
/2"
3"
7 1/
2"
7 1/
2"
7 1/
2"
7 1/
2"
7 1/
2"
7 1/
2"
2 1/
4"
Specify manufacturer & function of interior mortise lock.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.
CS-F-A410IML Passage set. P-F-A410IML (ext) P-F-A410IML (int)CS-F-A410IML-PR Privacy set. P-F-A410IML-ERC (ext) P-F-A410IML-TPC (int)TS-F-A410IML-FD Full dummy. P-F-A410D (ext) P-F-A410D (int)TS-F-A410IML-HD Half dummy. P-F-A410D
CS-F-A410-8IML Passage set. P-F-A410IML (ext) P-F-A410IML (int)CS-F-A410-8IML-PR Privacy set. P-F-A410-8IML-ERC (ext) P-F-A410-8IML-TPC (int)
TS-F-A410IML Passage set. P-F-A410IML (ext) P-F-A410IML (int)TS-F-A410IML-PR Privacy set. P-F-A410IML-ERC (ext) P-F-A410IML-TPC (int)TS-F-A410IML-FD Full dummy. P-F-A410D (ext) P-F-A410D (int)TS-F-A410IML-HD Half dummy. P-F-A410D
TS-F-A410-8IML Passage set. P-F-A410IML (ext) P-F-A410IML (int)TS-F-A410-8IML-PR Privacy set. P-F-A410-8IML-ERC (ext) P-F-A410-8IML-TPC (int)
Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m
PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.
14-105
Revised 02/08/16
Illustrations are for demonstration purposes only. Any knob, lever or ring pull can be combined with any style or size escutcheon plate.
Trim sets for interior mortise locks with spindle, no lock included. 2 1/4” center-to-center. (Shown)
Complete sets with interior mortise lock and spindle. 2 7/8” center-to-center.
Trim sets for interior mortise locks with spindle, no lock included. 2 7/8” center-to-center.
2 1/2” or 2 3/4” backset standard.Custom backsets available. Call for options and pricing.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.
Complete sets with interior mortise lock and spindle. 2 1/4” center-to-center. (Shown)
A601 ARCH INTERIOR MORTISE LOCK PASSAGE & PRIVACY SETS
CS-A601IML – Complete passage set with interior
mortise lock and spindle. OR TS-A601IML – Trim set only. No lock.
CS-A601IML-PR – Complete privacy set with interior
mortise lock and spindle. OR TS-A601IML-PR – Trim set only. No lock.
TS-A601IML-FD – Trim set only. – Full dummy.
TS-A601IML-HD – Trim set only. – Half dummy.
14 1
/2"
3" 3" 3" 3"
14 1
/2"
14 1
/2"
3" 3"
14 1
/2"
3"
5"5" 5" 5"5" 5"
2 1/
4"
5"2
1/4"
Specify manufacturer & function of interior mortise lock.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.
CS-A601IML Passage set. P-A601IML (ext) P-A601IML (int)CS-A601IML-PR Privacy set. P-A601IML-ERC (ext) P-A601IML-TPC (int)TS-A601IML-FD Full dummy. P-A601D (ext) P-A601D (int)TS-A601IML-HD Half dummy. P-A601D
CS-A601-8IML Passage set. P-A601IML (ext) P-A601IML (int)CS-A601-8IML-PR Privacy set. P-A601-8IML-ERC (ext) P-A601-8IML-TPC (int)
TS-A601IML Passage set. P-A601IML (ext) P-A601IML (int)TS-A601IML-PR Privacy set. P-A601IML-ERC (ext) P-A601IML-TPC (int)TS-A601IML-FD Full dummy. P-A601D (ext) P-A601D (int)TS-A601IML-HD Half dummy. P-A601D
TS-A601-8IML Passage set. P-A601IML (ext) P-A601IML (int)TS-A601-8IML-PR Privacy set. P-A601-8IML-ERC (ext) P-A601-8IML-TPC (int)
Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m
PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.
14-106
Revised 02/08/16
Illustrations are for demonstration purposes only. Any knob, lever or ring pull can be combined with any style or size escutcheon plate.
Trim sets for interior mortise locks with spindle, no lock included. 2 1/4” center-to-center. (Shown)
Complete sets with interior mortise lock and spindle. 2 7/8” center-to-center.
Trim sets for interior mortise locks with spindle, no lock included. 2 7/8” center-to-center.
2 1/2” or 2 3/4” backset standard.Custom backsets available. Call for options and pricing.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.
Complete sets with interior mortise lock and spindle. 2 1/4” center-to-center. (Shown)
F-A601 ARCH INTERIOR MORTISE LOCK PASSAGE & PRIVACY SETS
CS-F-A601IML – Complete passage set with interior
mortise lock and spindle. OR TS-F-A601IML – Trim set only. No lock.
CS-F-A601IML-PR – Complete privacy set with interior
mortise lock and spindle. OR TS-F-A601IML-PR – Trim set only. No lock.
TS-F-A601IML-FD – Trim set only. – Full dummy.
TS-F-A601IML-HD – Trim set only. – Half dummy.
14 1
/2"
3" 3"
14 1
/2"
3" 3"
14 1
/2"
3" 3"
14 1
/2"
3"
9 1/
2"
9 1/
2"
9 1/
2"
9 1/
2"
9 1/
2"
2 1/
4"
9 1/
2"
Specify manufacturer & function of interior mortise lock.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.
CS-F-A601IML Passage set. P-F-A601IML (ext) P-F-A601IML (int)CS-F-A601IML-PR Privacy set. P-F-A601IML-ERC (ext) P-F-A601IML-TPC (int)TS-F-A601IML-FD Full dummy. P-F-A601D (ext) P-F-A601D (int)TS-F-A601IML-HD Half dummy. P-F-A601D
CS-F-A601-8IML Passage set. P-F-A601IML (ext) P-F-A601IML (int)CS-F-A601-8IML-PR Privacy set. P-F-A601-8IML-ERC (ext) P-F-A601-8IML-TPC (int)
TS-F-A601IML Passage set. P-F-A601IML (ext) P-F-A601IML (int)TS-F-A601IML-PR Privacy set. P-F-A601IML-ERC (ext) P-F-A601IML-TPC (int)TS-F-A601IML-FD Full dummy. P-F-A601D (ext) P-F-A601D (int)TS-F-A601IML-HD Half dummy. P-F-A601D
TS-F-A601-8IML Passage set. P-F-A601IML (ext) P-F-A601IML (int)TS-F-A601-8IML-PR Privacy set. P-F-A601-8IML-ERC (ext) P-F-A601-8IML-TPC (int)
Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m
PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.
14-107
Revised 02/08/16
Illustrations are for demonstration purposes only. Any knob, lever or ring pull can be combined with any style or size escutcheon plate.
Trim sets for interior mortise locks with spindle, no lock included. 2 1/4” center-to-center. (Shown)
Complete sets with interior mortise lock and spindle. 2 7/8” center-to-center.
Trim sets for interior mortise locks with spindle, no lock included. 2 7/8” center-to-center.
2 1/2” or 2 3/4” backset standard.Custom backsets available. Call for options and pricing.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.
Complete sets with interior mortise lock and spindle. 2 1/4” center-to-center. (Shown)
A602 ARCH INTERIOR MORTISE LOCK PASSAGE & PRIVACY SETS
CS-A602IML – Complete passage set with interior
mortise lock and spindle. OR TS-A602IML – Trim set only. No lock.
CS-A602IML-PR – Complete privacy set with interior
mortise lock and spindle. OR TS-A602IML-PR – Trim set only. No lock.
TS-A602IML-FD – Trim set only. – Full dummy.
TS-A602IML-HD – Trim set only. – Half dummy.
15 1
/4"
3 1/2" 3 1/2"
15 1
/4"
3 1/2" 3 1/2"
15 1
/4"
3 1/2" 3 1/2"
15 1
/4"
3 1/2"
5 1/
4"
5 1/
4"
5 1/
4"
5 1/
4"
5 1/
4"
5 1/
4"
2 1/
4"
5 1/
4"2
1/4"
Specify manufacturer & function of interior mortise lock.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.
CS-A602IML Passage set. P-A602IML (ext) P-A602IML (int)CS-A602IML-PR Privacy set. P-A602IML-ERC (ext) P-A602IML-TPC (int)TS-A602IML-FD Full dummy. P-A602D (ext) P-A602D (int)TS-A602IML-HD Half dummy. P-A602D
CS-A602-8IML Passage set. P-A602IML (ext) P-A602IML (int)CS-A602-8IML-PR Privacy set. P-A602-8IML-ERC (ext) P-A602-8IML-TPC (int)
TS-A602IML Passage set. P-A602IML (ext) P-A602IML (int)TS-A602IML-PR Privacy set. P-A602IML-ERC (ext) P-A602IML-TPC (int)TS-A602IML-FD Full dummy. P-A602D (ext) P-A602D (int)TS-A602IML-HD Half dummy. P-A602D
TS-A602-8IML Passage set. P-A602IML (ext) P-A602IML (int)TS-A602-8IML-PR Privacy set. P-A602-8IML-ERC (ext) P-A602-8IML-TPC (int)
Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m
PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.
14-108
Revised 02/08/16
Illustrations are for demonstration purposes only. Any knob, lever or ring pull can be combined with any style or size escutcheon plate.
Trim sets for interior mortise locks with spindle, no lock included. 2 1/4” center-to-center. (Shown)
Complete sets with interior mortise lock and spindle. 2 7/8” center-to-center.
Trim sets for interior mortise locks with spindle, no lock included. 2 7/8” center-to-center.
2 1/2” or 2 3/4” backset standard.Custom backsets available. Call for options and pricing.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.
Complete sets with interior mortise lock and spindle. 2 1/4” center-to-center. (Shown)
F-A602 ARCH INTERIOR MORTISE LOCK PASSAGE & PRIVACY SETS
CS-F-A602IML – Complete passage set with interior
mortise lock and spindle. OR TS-F-A602IML – Trim set only. No lock.
CS-F-A602IML-PR – Complete privacy set with interior
mortise lock and spindle. OR TS-F-A602IML-PR – Trim set only. No lock.
TS-F-A602IML-FD – Trim set only. – Full dummy.
TS-F-A602IML-HD – Trim set only. – Half dummy.
15 1
/4"
3 1/2" 3 1/2"
15 1
/4"
3 1/2" 3 1/2"
15 1
/4"
3 1/2" 3 1/2"
15 1
/4"
3 1/2"
10"
10"
10"
10"
10"
10"
2 1/
4"
Specify manufacturer & function of interior mortise lock.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.
CS-F-A602IML Passage set. P-F-A602IML (ext) P-F-A602IML (int)CS-F-A602IML-PR Privacy set. P-F-A602IML-ERC (ext) P-F-A602IML-TPC (int)TS-F-A602IML-FD Full dummy. P-F-A602D (ext) P-F-A602D (int)TS-F-A602IML-HD Half dummy. P-F-A602D
CS-F-A602-8IML Passage set. P-F-A602IML (ext) P-F-A602IML (int)CS-F-A602-8IML-PR Privacy set. P-F-A602-8IML-ERC (ext) P-F-A602-8IML-TPC (int)
TS-F-A602IML Passage set. P-F-A602IML (ext) P-F-A602IML (int)TS-F-A602IML-PR Privacy set. P-F-A602IML-ERC (ext) P-F-A602IML-TPC (int)TS-F-A602IML-FD Full dummy. P-F-A602D (ext) P-F-A602D (int)TS-F-A602IML-HD Half dummy. P-F-A602D
TS-F-A602-8IML Passage set. P-F-A602IML (ext) P-F-A602IML (int)TS-F-A602-8IML-PR Privacy set. P-F-A602-8IML-ERC (ext) P-F-A602-8IML-TPC (int)
Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m
PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.
14-109
Revised 02/08/16
Illustrations are for demonstration purposes only. Any knob, lever or ring pull can be combined with any style or size escutcheon plate.
Trim sets for interior mortise locks with spindle, no lock included. 2 7/8” center-to-center.
Complete sets with interior mortise lock and spindle. 2 7/8” center-to-center.
Trim sets for interior mortise locks with spindle, no lock included. 2 1/4” center-to-center. (Shown)
2 1/2” or 2 3/4” backset standard.Custom backsets available. Call for options and pricing.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.
Complete sets with interior mortise lock and spindle. 2 1/4” center-to-center. (Shown)
A811 ARCH INTERIOR MORTISE LOCK PASSAGE & PRIVACY SETS
CS-A811IML – Complete passage set with interior
mortise lock and spindle. OR TS-A811IML – Trim set only. No lock.
CS-A811IML-PR – Complete privacy set with interior
mortise lock and spindle. OR TS-A811IML-PR – Trim set only. No lock.
TS-A811IML-FD – Trim set only. – Full dummy.
TS-A811IML-HD – Trim set only. – Half dummy.
10 1
/2"
1 1/2" 1 1/2"
10 1
/2"
1 1/2" 1 1/2"
10 1
/2"
1 1/2" 1 1/2"
10 1
/2"
1 1/2"
4 1/
4"
4 1/
4"
4 1/
4"
4 1/
4"
4 1/
4"
4 1/
4"
2 1/
4"
4 1/
4"2
1/4"
Specify manufacturer & function of interior mortise lock.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.
CS-A811IML Passage set. P-A811IML (ext) P-A811IML (int).CS-A811IML-PR Privacy set. P-A811IML-ERC (ext) P-A811IML-TPC (int)TS-A811IML-FD Full dummy. P-A811D (ext) P-A811D (int)TS-A811IML-HD Half dummy. P-A811D
CS-A811-8IML Passage set. P-A811IML (ext) P-A811IML (int)CS-A811-8IML-PR Privacy set. P-A811-8IML-ERC (ext) P-A811-8IML-TPC (int)
TS-A811IML Passage set. P-A811IML (ext) P-A811IML (int)TS-A811IML-PR Privacy set. P-A811IML-ERC (ext) P-A811IML-TPC (int)TS-A811IML-FD Full dummy. P-A811D (ext) P-A811D (int)TS-A811IML-HD Half dummy. P-A811D
TS-A811-8IML Passage set. P-A811IML (ext) P-A811IML (int)TS-A811-8IML-PR Privacy set. P-A811-8IML-ERC (ext) P-A811-8IML-TPC (int)
Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m
PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.
14-110
Revised 02/08/16
Illustrations are for demonstration purposes only. Any knob, lever or ring pull can be combined with any style or size escutcheon plate.
Complete sets with interior mortise lock and spindle. 2 1/4” center-to-center. (Shown)
Trim sets for interior mortise locks with spindle, no lock included. 2 1/4” center-to-center. (Shown)
Complete sets with interior mortise lock and spindle. 2 7/8” center-to-center.
Trim sets for interior mortise locks with spindle, no lock included. 2 7/8” center-to-center.
2 1/2” or 2 3/4” backset standard.Custom backsets available. Call for options and pricing.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.
F-A811 ARCH INTERIOR MORTISE LOCK PASSAGE & PRIVACY SETS
CS-F-A811IML – Complete passage set with interior
mortise lock and spindle. OR TS-F-A811IML – Trim set only. No lock.
CS-F-A811IML-PR – Complete privacy set with interior
mortise lock and spindle. OR TS-F-A811IML-PR – Trim set only. No lock.
TS-F-A811IML-FD – Trim set only. – Full dummy.
TS-F-A811IML-HD – Trim set only. – Half dummy.
10 1
/2"
1 1/2" 1 1/2"
10 1
/2"
1 1/2" 1 1/2"
10 1
/2"
1 1/2" 1 1/2"
10 1
/2"
1 1/2"
6 1/
4"
6 1/
4"
6 1/
4"
6 1/
4"
6 1/
4"
6 1/
4"
2 1/
4"
Specify manufacturer & function of interior mortise lock.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.
CS-F-A811IML Passage set. P-F-A811 (ext) P-F-A811 (int)CS-F-A811IML-PR Privacy set. P-F-A811IML-ERC (ext) P-F-A811IML-TPC (int)TS-F-A811IML-FD Full dummy. P-F-A811D (ext) P-F-A811D (int)TS-F-A811IML-HD Half dummy. P-F-A811D
CS-F-A811-8IML Passage set. P-F-A811 (ext) P-F-A811 (int)CS-F-A811-8IML-PR Privacy set. P-F-A811-8IML-ERC (ext) P-F-A811-8IML-TPC (int)
TS-F-A811IML Passage set. P-F-A811 (ext) P-F-A811 (int)TS-F-A811IML-PR Privacy set. P-F-A811IML-ERC (ext) P-F-A811IML-TPC (int)TS-F-A811IML-FD Full dummy. P-F-A811D (ext) P-F-A811D (int)TS-F-A811IML-HD Half dummy. P-F-A811D
TS-F-A811-8IML Passage set. P-F-A811 (ext) P-F-A811 (int)TS-F-A811-8IML-PR Privacy set. P-F-A811-8IML-ERC (ext) P-F-A811-8IML-TPC (int)
Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m
PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.
14-111
Revised 02/08/16
Illustrations are for demonstration purposes only. Any knob, lever or ring pull can be combined with any style or size escutcheon plate.
Complete sets with interior mortise lock and spindle. 2 1/4” center-to-center. (Shown)
Trim sets for interior mortise locks with spindle, no lock included. 2 1/4” center-to-center. (Shown)
Complete sets with interior mortise lock and spindle. 2 7/8” center-to-center.
Trim sets for interior mortise locks with spindle, no lock included. 2 7/8” center-to-center.
2 1/2” or 2 3/4” backset standard.Custom backsets available. Call for options and pricing.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.
OP700 OVAL INTERIOR MORTISE LOCK PASSAGE & PRIVACY SETS
CS-OP700IML – Complete passage set with interior
mortise lock and spindle. OR TS-OP700IML – Trim set only. No lock.
CS-OP700IML-PR – Complete privacy set with interior
mortise lock and spindle. OR TS-OP700IML-PR – Trim set only. No lock.
TS-OP700IML-FD – Trim set only. – Full dummy.
TS-OP700IML-HD – Trim set only. – Half dummy.
8 3/
4"
3" 3"
8 3/
4"
3" 3"
8 3/
4"
3" 3"
8 3/
4"
3"
2 1/
2"
2 1/
2"
2 1/
2"
2 1/
2"
2 1/
2"
2 1/
2"
2 1/
4"
2 1/
2"2
1/4"
Specify manufacturer & function of interior mortise lock.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.
CS-OP700IML Passage set. P-OP700 (ext) P-OP700 (int)CS-OP700IML-PR Privacy set. P-OP700IML-ERC (ext) P-OP700IML-TPC (int)TS-OP700IML-FD Full dummy. P-OP700D (ext) P-OP700D (int)TS-OP700IML-HD Half dummy. P-OP700D
CS-OP700-8IML Passage set. P-OP700 (ext) P-OP700 (int)CS-OP700-8IML-PR Privacy set. P-OP700-8IML-ERC (ext) P-OP700-8IML-TPC (int)
TS-OP700IML Passage set. P-OP700 (ext) P-OP700 (int)TS-OP700IML-PR Privacy set. P-OP700IML-ERC (ext) P-OP700IML-TPC (int)TS-OP700IML-FD Full dummy. P-OP700D (ext) P-OP700D (int)TS-OP700IML-HD Half dummy. P-OP700D
TS-OP700-8IML Passage set. P-OP700 (ext) P-OP700 (int)TS-OP700-8IML-PR Privacy set. P-OP700-8IML-ERC (ext) P-OP700-8IML-TPC (int)
Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m
PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.
14-112
Revised 02/08/16
Illustrations are for demonstration purposes only. Any knob, lever or ring pull can be combined with any style or size escutcheon plate.
Complete sets with interior mortise lock and spindle. 2 1/4” center-to-center. (Shown)
Trim sets for interior mortise locks with spindle, no lock included. 2 1/4” center-to-center. (Shown)
Complete sets with interior mortise lock and spindle. 2 7/8” center-to-center.
Trim sets for interior mortise locks with spindle, no lock included. 2 7/8” center-to-center.
2 1/2” or 2 3/4” backset standard.Custom backsets available. Call for options and pricing.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.
F-OP700 OVAL INTERIOR MORTISE LOCK PASSAGE & PRIVACY SETS
CS-F-OP700IML – Complete passage set with interior
mortise lock and spindle. OR TS-F-OP700IML – Trim set only. No lock.
CS-F-OP700IML-PR – Complete privacy set with interior
mortise lock and spindle. OR TS-F-OP700IML-PR – Trim set only. No lock.
TS-F-OP700IML-FD – Trim set only. – Full dummy.
TS-F-OP700IML-HD – Trim set only. – Half dummy.
8 3/
4"
3" 3"
8 3/
4"
3" 3"
8 3/
4"
3" 3"
8 3/
4"
3"
6 1/
4"
6 1/
4"
6 1/
4"
6 1/
4"
6 1/
4"
6 1/
4"
2 1/
4"
Specify manufacturer & function of interior mortise lock.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.
CS-F-OP700IML Passage set. P-F-OP700 (ext) P-F-OP700 (int)CS-F-OP700IML-PR Privacy set. P-F-OP700IML-ERC (ext) P-F-OP700IML-TPC (int)TS-F-OP700IML-FD Full dummy. P-F-OP700D (ext) P-F-OP700D (int)TS-F-OP700IML-HD Half dummy. P-F-OP700D
CS-F-OP700-8IML Passage set. P-F-OP700 (ext) P-F-OP700 (int)CS-F-OP700-8IML-PR Privacy set. P-F-OP700-8IML-ERC (ext) P-F-OP700-8IML-TPC (int)
TS-F-OP700IML Passage set. P-F-OP700 (ext) P-F-OP700 (int)TS-F-OP700IML-PR Privacy set. P-F-OP700IML-ERC (ext) P-F-OP700IML-TPC (int)TS-F-OP700IML-FD Full dummy. P-F-OP700D (ext) P-F-OP700D (int)TS-F-OP700IML-HD Half dummy. P-F-OP700D
TS-F-OP700-8IML Passage set. P-F-OP700 (ext) P-F-OP700 (int)TS-F-OP700-8IML-PR Privacy set. P-F-OP700-8IML-ERC (ext) P-F-OP700-8IML-TPC (int)
Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m
PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.
14-113
Revised 02/08/16
Illustrations are for demonstration purposes only. Any knob, lever or ring pull can be combined with any style or size escutcheon plate.
Complete sets with interior mortise lock and spindle. 2 1/4” center-to-center.
Trim sets for interior mortise locks with spindle, no lock included. 2 1/4” center-to-center.
2 1/2” or 2 3/4” backset standard.Custom backsets available. Call for options and pricing.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.
949 CONTEMPORARY INTERIOR MORTISE LOCK PASSAGE & PRIVACY SETS
CS-949IML – Complete passage set with interior
mortise lock and spindle. OR TS-949IML – Trim set only. No lock.
CS-949IML-PR – Complete privacy set with interior
mortise lock and spindle. OR TS-949IML-PR – Trim set only. No lock.
TS-949IML-FD – Trim set only. – Full dummy.
TS-949IML-HD – Trim set only. – Half dummy.
6"2" 2"
6"
2" 2"
6"
2" 2"
6"
2"
2" 2" 2" 2" 2" 2"
2 1/
4"
2"2
1/4"
Specify manufacturer & function of interior mortise lock.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.
CS-949IML Passage set. P-949OH (ext) P-949OH (int)
CS-949IML-PR Privacy set. P-949OH-IML-ERC (ext) P-949OH-IML-TPC (int)
TS-949IML-FD Full dummy. P-949OH-D (ext) P-949OH-D (int)
TS-949IML-HD Half dummy. P-949OH-D
TS-949IML Passage set. P-949OH (ext) P-949OH (int)
TS-949IML-PR Privacy set. P-949OH-IML-ERC (ext) P-949OH-IML-TPC (int)
TS-949IML-FD Full dummy. P-949OH-D (ext) P-949OH-D (int)
TS-949IML-HD Half dummy. P-949OH-D
Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m
PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.
14-114
Revised 02/08/16
Illustrations are for demonstration purposes only. Any knob, lever or ring pull can be combined with any style or size escutcheon plate.
Trim sets for interior mortise locks with spindle, no lock included. 2 1/4” center-to-center.
2 1/2” or 2 3/4” backset standard.Custom backsets available. Call for options and pricing.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.
Complete sets with interior mortise lock and spindle. 2 1/4” center-to-center.
F949 CONTEMPORARY INTERIOR MORTISE LOCK PASSAGE & PRIVACY SETS
CS-F949IML – Complete passage set with interior
mortise lock and spindle. OR TS-F949IML – Trim set only. No lock.
CS-F949IML-PR – Complete privacy set with interior
mortise lock and spindle. OR TS-F949IML-PR – Trim set only. No lock.
TS-F949IML-FD – Trim set only. – Full dummy.
TS-F949IML-HD – Trim set only. – Half dummy.
6"
2" 2"
6"
2" 2"
6"
2" 2"
6"
2"
4"4" 4"4" 4"4" 2 1/
4"
Specify manufacturer & function of interior mortise lock.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.
CS-F949IML Passage set. P-F949OH (ext) P-F949OH (int)
CS-F949IML-PR Privacy set. P-F949OH-IML-ERC (ext) P-F949OH-IML-TPC (int)
TS-F949IML-FD Full dummy. P-F949D (ext) P-F949D (int)
TS-F949IML-HD Half dummy. P-F949D
TS-F949IML Passage set. P-F949OH (ext) P-F949OH (int)
TS-F949IML-PR Privacy set. P-F949OH-IML-ERC (ext) P-F949OH-IML-TPC (int)
TS-F949IML-FD Full dummy. P-F949D (ext) P-F949D (int)
TS-F949IML-HD Half dummy. P-F949D
Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m
PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.
14-115
Revised 02/08/16
Illustrations are for demonstration purposes only. Any knob, lever or ring pull can be combined with any style or size escutcheon plate.
Complete sets with interior mortise lock and spindle. 2 1/4” center-to-center. (Shown)
Trim sets for interior mortise locks with spindle, no lock included. 2 1/4” center-to-center. (Shown)
Complete sets with interior mortise lock and spindle. 2 7/8” center-to-center.
Trim sets for interior mortise locks with spindle, no lock included. 2 7/8” center-to-center.
2 1/2” or 2 3/4” backset standard.Custom backsets available. Call for options and pricing.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.
950 CONTEMPORARY INTERIOR MORTISE LOCK PASSAGE & PRIVACY SETS
CS-950IML – Complete passage set with interior
mortise lock and spindle. OR TS-950IML – Trim set only. No lock.
CS-950IML-PR – Complete privacy set with interior
mortise lock and spindle. OR TS-950IML-PR – Trim set only. No lock.
TS-950IML-FD – Trim set only. – Full dummy.
TS-950IML-HD – Trim set only. – Half dummy.
8 3/
4"
2" 2"
8 3/
4"
2" 2"
8 3/
4"
2" 2"
8 3/
4"
2"
2 3/
4"
2 3/
4"
2 3/
4"
2 3/
4"
2 3/
4"
2 3/
4"
2 3/
4"
2 1/
4"
2 1/
4"
Specify manufacturer & function of interior mortise lock.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.
CS-950IML Passage set. P-950 (ext) P-950 (int)CS-950IML-PR Privacy set. P-950IML-ERC (ext) P-950IML-TPC (int)TS-950IML-FD Full dummy. P-950D (ext) P-950D (int)TS-950IML-HD Half dummy. P-950D
CS-950-8IML Passage set. P-950 (ext) P-950 (int)CS-950-8IML-PR Privacy set. P-950-8IML-ERC (ext) P-950-8IML-TPC (int)
TS-950IML Passage set. P-950 (ext) P-950 (int)TS-950IML-PR Privacy set. P-950IML-ERC (ext) P-950IML-TPC (int)TS-950IML-FD Full dummy. P-950D (ext) P-950D (int)TS-950IML-HD Half dummy. P-950D
TS-950-8IML Passage set. P-950 (ext) P-950 (int)TS-950-8IML-PR Privacy set. P-950-8IML-ERC (ext) P-950-8IML-TPC (int)
Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m
PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.
14-116
Revised 02/08/16
Illustrations are for demonstration purposes only. Any knob, lever or ring pull can be combined with any style or size escutcheon plate.
Complete sets with interior mortise lock and spindle. 2 1/4” center-to-center. (Shown)
Complete sets with interior mortise lock and spindle. 2 7/8” center-to-center.
Trim sets for interior mortise locks with spindle, no lock included. 2 1/4” center-to-center. (Shown)
Trim sets for interior mortise locks with spindle, no lock included. 2 7/8” center-to-center.
2 1/2” or 2 3/4” backset standard.Custom backsets available. Call for options and pricing.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.
F950 CONTEMPORARY INTERIOR MORTISE LOCK PASSAGE & PRIVACY SETS
CS-F950IML – Complete passage set with interior
mortise lock and spindle. OR TS-F950IML – Trim set only. No lock.
CS-F950IML-PR – Complete privacy set with interior
mortise lock and spindle. – Shown w/RC-7. OR TS-F950IML-PR – Trim set only. No lock.
TS-F950IML-FD – Trim set only. – Full dummy.
TS-F950IML-HD – Trim set only. – Half dummy.
8 3/
4"
2" 2"
8 3/
4"
2" 2"
8 3/
4"
2" 2"
8 3/
4"
2"
6"6" 6"6" 6"6"
2 1/
4"
Specify manufacturer & function of interior mortise lock.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.
CS-F950IML Passage set. P-F950 (ext) P-F950 (int)CS-F950IML-PR Privacy set. P-F950IML-ERC (ext) P-F950IML-TPC (int)TS-F950IML-FD Full dummy. P-F950D (ext) P-F950D (int)TS-F950IML-HD Half dummy. P-F950D
CS-F950-8IML Passage set. P-F950 (ext) P-F950 (int)CS-F950-8IML-PR Privacy set. P-F950-8IML-ERC (ext) P-F950-8IML-TPC (int)
TS-F950IML Passage set. P-F950 (ext) P-F950 (int)TS-F950IML-PR Privacy set. P-F950IML-ERC (ext) P-F950IML-TPC (int)TS-F950IML-FD Full dummy. P-F950D (ext) P-F950D (int)TS-F950IML-HD Half dummy. P-F950D
TS-F950-8IML Passage set. P-F950 (ext) P-F950 (int)TS-F950-8IML-PR Privacy set. P-F950-8IML-ERC (ext) P-F950-8IML-TPC (int)
Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m
PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.
14-117
Revised 02/08/16
Illustrations are for demonstration purposes only. Any knob, lever or ring pull can be combined with any style or size escutcheon plate.
Complete sets with interior mortise lock and spindle. 2 1/4” center-to-center. (Shown)
Trim sets for interior mortise locks with spindle, no lock included. 2 1/4” center-to-center. (Shown)
Complete sets with interior mortise lock and spindle. 2 7/8” center-to-center.
Trim sets for interior mortise locks with spindle, no lock included. 2 7/8” center-to-center.
2 1/2” or 2 3/4” backset standard.Custom backsets available. Call for options and pricing.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.
951 CONTEMPORARY INTERIOR MORTISE LOCK PASSAGE & PRIVACY SETS
CS-951IML – Complete passage set with interior
mortise lock and spindle. OR TS-951IML – Trim1set only. No lock.
CS-951IML-PR – Complete privacy set with interior
mortise lock and spindle. – Shown w/RC-7. OR TS-951IML-PR – Trim set only. No lock.
TS-951IML-FD – Trim set only. – Full dummy.
TS-951IML-HD – Trim set only. – Half dummy.
10"
10"
2" 2"2" 2"
10"
2" 2"
10"
2"
3 1/
4"
3 1/
4"
3 1/
4"
3 1/
4"
3 1/
4"
3 1/
4"
3 1/
4"
2 1/
4"
2 1/
4"
Specify manufacturer & function of interior mortise lock.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.
CS-951IML Passage set. P-951IML (ext) P-951IML (int)CS-951IML-PR Privacy set. P-951IML-ERC (ext) P-951IML-TPC (int)TS-951IML-FD Full dummy. P-951D (ext) P-951D (int)TS-951IML-HD Half dummy. P-951D
CS-951-8IML Passage set. P-951IML (ext) P-951IML (int)CS-951-8IML-PR Privacy set. P-951-8IML-ERC (ext) P-951-8IML-TPC (int)
TS-951IML Passage set. P-951IML (ext) P-951IML (int)TS-951IML-PR Privacy set. P-951IML-ERC (ext) P-951IML-TPC (int)TS-951IML-FD Full dummy. P-951D (ext) P-951D (int)TS-951IML-HD Half dummy. P-951D
TS-951-8IML Passage set. P-951IML (ext) P-951IML (int)TS-951-8IML-PR Privacy set. P-951-8IML-ERC (ext) P-951-8IML-TPC (int)
Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m
PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.
14-118
Revised 02/08/16
Illustrations are for demonstration purposes only. Any knob, lever or ring pull can be combined with any style or size escutcheon plate.
Complete sets with interior mortise lock and spindle. 2 1/4” center-to-center. (Shown)
Trim sets for interior mortise locks with spindle, no lock included. 2 1/4” center-to-center. (Shown)
Complete sets with interior mortise lock and spindle. 2 7/8” center-to-center.
Trim sets for interior mortise locks with spindle, no lock included. 2 7/8” center-to-center.
2 1/2” or 2 3/4” backset standard.Custom backsets available. Call for options and pricing.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.
F951 CONTEMPORARY INTERIOR MORTISE LOCK PASSAGE & PRIVACY SETS
CS-F951IML – Complete passage set with interior
mortise lock and spindle. OR TS-F951IML – Trim1set only. No lock.
CS-F951IML-PR – Complete privacy set with interior
mortise lock and spindle. – Shown w/RC-7. OR TS-F951IML-PR – Trim set only. No lock.
TS-F951IML-FD – Trim set only. – Full dummy.
TS-F951IML-HD – Trim set only. – Half dummy.
10"
2" 2"
10"
2" 2"
10"
2" 2"
10"
2"
6 3/
4"
6 3/
4"
6 3/
4"
6 3/
4"
6 3/
4"
6 3/
4"
2 1/
4"
Specify manufacturer & function of interior mortise lock.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.
CS-F951IML Passage set. P-F951IML (ext) P-F951IML (int)CS-F951IML-PR Privacy set. P-F951IML-ERC (ext) P-F951IML-TPC (int)TS-F951IML-FD Full dummy. P-F951D (ext) P-F951D (int)TS-F951IML-HD Half dummy. P-F951D
CS-F951-8IML Passage set. P-F951IML (ext) P-F951IML (int)CS-F951-8IML-PR Privacy set. P-F951-8IML-ERC (ext) P-F951-8IML-TPC (int)
TS-F951IML Passage set. P-F951IML (ext) P-F951IML (int)TS-F951IML-PR Privacy set. P-F951IML-ERC (ext) P-F951IML-TPC (int)TS-F951IML-FD Full dummy. P-F951D (ext) P-F951D (int)TS-F951IML-HD Half dummy. P-F951D
TS-F951-8IML Passage set. P-F951IML (ext) P-F951IML (int)TS-F951-8IML-PR Privacy set. P-F951-8IML-ERC (ext) P-F951-8IML-TPC (int)
Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m
PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.
14-119
Revised 02/08/16
Illustrations are for demonstration purposes only. Any knob, lever or ring pull can be combined with any style or size escutcheon plate.
Complete sets with interior mortise lock and spindle. 2 1/4” center-to-center. (Shown)
Trim sets for interior mortise locks with spindle, no lock included. 2 1/4” center-to-center. (Shown)
Complete sets with interior mortise lock and spindle. 2 7/8” center-to-center.
Trim sets for interior mortise locks with spindle, no lock included. 2 7/8” center-to-center.
2 1/2” or 2 3/4” backset standard.Custom backsets available. Call for options and pricing.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.
952 CONTEMPORARY INTERIOR MORTISE LOCK PASSAGE & PRIVACY SETS
CS-952IML – Complete passage set with interior
mortise lock and spindle. OR TS-952IML – Trim1set only. No lock.
CS-952IML-PR – Complete privacy set with interior
mortise lock and spindle. – Shown w/RC-7. OR TS-952IML-PR – Trim set only. No lock.
TS-952IML-FD – Trim set only. – Full dummy.
TS-952IML-HD – Trim set only. – Half dummy.
10"
2 1/2" 2 1/2"
10"
2 1/2" 2 1/2"
10"
2 1/2" 2 1/2"
10"
2 1/2"
3 1/
4"
3 1/
4"
3 1/
4"
3 1/
4"
3 1/
4"
3 1/
4"
2 1/
4"
3 1/
4"2
1/4"
Specify manufacturer & function of interior mortise lock.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.
CS-952IML Passage set. P-952IML (ext) P-952IML (int)CS-952IML-PR Privacy set. P-952IML-ERC (ext) P-952IML-TPC (int)TS-952IML-FD Full dummy. P-952D (ext) P-952D (int)TS-952IML-HD Half dummy. P-952D
CS-952-8IML Passage set. P-952IML (ext) P-952IML (int)CS-952-8IML-PR Privacy set. P-952-8IML-ERC (ext) P-952-8IML-TPC (int)
TS-952IML Passage set. P-952IML (ext) P-952IML (int)TS-952IML-PR Privacy set. P-952IML-ERC (ext) P-952IML-TPC (int)TS-952IML-FD Full dummy. P-952D (ext) P-952D (int)TS-952IML-HD Half dummy. P-952D
TS-952-8IML Passage set. P-952IML (ext) P-952IML (int)TS-952-8IML-PR Privacy set. P-952-8IML-ERC (ext) P-952-8IML-TPC (int)
Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m
PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.
14-120
Revised 02/08/16
Illustrations are for demonstration purposes only. Any knob, lever or ring pull can be combined with any style or size escutcheon plate.
Trim sets for interior mortise locks with spindle, no lock included. 2 1/4” center-to-center. (Shown)
Complete sets with interior mortise lock and spindle. 2 7/8” center-to-center.
Trim sets for interior mortise locks with spindle, no lock included. 2 7/8” center-to-center.
2 1/2” or 2 3/4” backset standard.Custom backsets available. Call for options and pricing.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.
Complete sets with interior mortise lock and spindle. (Shown)
F952 CONTEMPORARY INTERIOR MORTISE LOCK PASSAGE & PRIVACY SETS
CS-F952IML – Complete passage set with interior
mortise lock and spindle.. OR TS-F952IML – Trim1set only. No lock.
CS-F952IML-PR – Complete privacy set with interior
mortise lock and spindle. – Shown w/RC-7. OR TS-F952IML-PR – Trim set only. No lock.
TS-F952IML-FD – Trim set only. – Full dummy.
TS-F952IML-HD – Trim set only. – Half dummy.
10"
2 1/2" 2 1/2"
10"
2 1/2" 2 1/2"
10"
2 1/2" 2 1/2"
10"
2 1/2"
6 3/
4"
6 3/
4"
6 3/
4"
6 3/
4"
6 3/
4"
6 3/
4"
2 1/
4"
Specify manufacturer & function of interior mortise lock.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.
CS-F952IML Passage set. P-F952IML (ext) P-F952IML (int)CS-F952IML-PR Privacy set. P-F952IML-ERC (ext) P-F952IML-TPC (int)TS-F952IML-FD Full dummy. P-F952D (ext) P-F952D (int)TS-F952IML-HD Half dummy. P-F952D
CS-F952-8IML Passage set. P-F952IML (ext) P-F952IML (int)CS-F952-8IML-PR Privacy set. P-F952-8IML-ERC (ext) P-F952-8IML-TPC (int)
TS-F952IML Passage set. P-F952IML (ext) P-F952IML (int)TS-F952IML-PR Privacy set. P-F952IML-ERC (ext) P-F952IML-TPC (int)TS-F952IML-FD Full dummy. P-F952D (ext) P-F952D (int)TS-F952IML-HD Half dummy. P-F952D
TS-F952-8IML Passage set. P-F952IML (ext) P-F952IML (int)TS-F952-8IML-PR Privacy set. P-F952-8IML-ERC (ext) P-F952-8IML-TPC (int)
Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m
PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.
14-121
Revised 02/08/16
Illustrations are for demonstration purposes only. Any knob, lever or ring pull can be combined with any style or size escutcheon plate.
Complete sets with interior mortise lock and spindle. 2 1/4” center-to-center. (Shown)
Trim sets for interior mortise locks with spindle, no lock included. 2 1/4” center-to-center. (Shown)
Complete sets with interior mortise lock and spindle. 2 7/8” center-to-center.
Trim sets for interior mortise locks with spindle, no lock included. 2 7/8” center-to-center.
2 1/2” or 2 3/4” backset standard.Custom backsets available. Call for options and pricing.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.
953 CONTEMPORARY INTERIOR MORTISE LOCK PASSAGE & PRIVACY SETS
CS-953IML – Complete passage set with interior
mortise lock and spindle. OR TS-953IML – Trim1set only. No lock.
CS-953IML-PR – Complete privacy set with interior
mortise lock and spindle. OR TS-953IML-PR – Trim set only. No lock.
TS-953IML-FD – Trim set only. – Full dummy.
TS-953IML-HD – Trim set only. – Half dummy.
8 3/
4"
2 1/2" 2 1/2"
8 3/
4"
2 1/2" 2 1/2"
8 3/
4"
2 1/2" 2 1/2"
8 3/
4"
2 1/2"
2 3/
4"
2 3/
4"
2 3/
4"
2 3/
4"
2 3/
4"
2 3/
4"
2 1/
4"
2 3/
4"2
1/4"
Specify manufacturer & function of interior mortise lock.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.
CS-953IML Passage set. P-953 (ext) P-953 (int)CS-953IML-PR Privacy set. P-953IML-ERC (ext) P-953IML-TPC (int)TS-953IML-FD Full dummy. P-953D (ext) P-953D (int)TS-953IML-HD Half dummy. P-953D
CS-953-8IML Passage set. P-953 (ext) P-953 (int)CS-953-8IML-PR Privacy set. P-953-8IML-ERC (ext) P-953-8IML-TPC (int)
TS-953IML Passage set. P-953 (ext) P-953 (int)TS-953IML-PR Privacy set. P-953IML-ERC (ext) P-953IML-TPC (int)TS-953IML-FD Full dummy. P-953D (ext) P-953D (int)TS-953IML-HD Half dummy. P-953D
TS-953-8IML Passage set. P-953 (ext) P-953 (int)TS-953-8IML-PR Privacy set. P-953-8IML-ERC (ext) P-953-8IML-TPC (int)
Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m
PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.
14-122
Revised 02/08/16
Illustrations are for demonstration purposes only. Any knob, lever or ring pull can be combined with any style or size escutcheon plate.
Complete sets with interior mortise lock and spindle. 2 1/4” center-to-center. (Shown)
Trim sets for interior mortise locks with spindle, no lock included. 2 1/4” center-to-center. (Shown)
Complete sets with interior mortise lock and spindle. 2 7/8” center-to-center.
Trim sets for interior mortise locks with spindle, no lock included. 2 7/8” center-to-center.
2 1/2” or 2 3/4” backset standard.Custom backsets available. Call for options and pricing.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.
F953 CONTEMPORARY INTERIOR MORTISE LOCK PASSAGE & PRIVACY SETS
CS-F953IML – Complete passage set with interior
mortise lock and spindle. OR TS-F953IML – Trim1set only. No lock.
CS-F953IML-PR – Complete privacy set with interior
mortise lock and spindle. OR TS-F953IML-PR – Trim set only. No lock.
TS-F953IML-FD – Trim set only. – Full dummy.
TS-F953IML-HD – Trim set only. – Half dummy.
8 3/
4"
2 1/2" 2 1/2"
8 3/
4"
2 1/2" 2 1/2"
8 3/
4"
2 1/2" 2 1/2"
8 3/
4"
2 1/2"
6"6" 6"6" 6"6"
2 1/
4"
Specify manufacturer & function of interior mortise lock.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.
CS-F953IML Passage set. P-F953 (ext) P-F953 (int)CS-F953IML-PR Privacy set. P-F953IML-ERC (ext) P-F953IML-TPC (int)TS-F953IML-FD Full dummy. P-F953D (ext) P-F953D (int)TS-F953IML-HD Half dummy. P-F953D
CS-F953-8IML Passage set. P-F953 (ext) P-F953 (int)CS-F953-8IML-PR Privacy set. P-F953-8IML-ERC (ext) P-F953-8IML-TPC (int)
TS-F953IML Passage set. P-F953 (ext) P-F953 (int)TS-F953IML-PR Privacy set. P-F953IML-ERC (ext) P-F953IML-TPC (int)TS-F953IML-FD Full dummy. P-F953D (ext) P-F953D (int)TS-F953IML-HD Half dummy. P-F953D
TS-F953-8IML Passage set. P-F953 (ext) P-F953 (int)TS-F953-8IML-PR Privacy set. P-F953-8IML-ERC (ext) P-F953-8IML-TPC (int)
Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m
PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.
14-123
Revised 02/08/16
Illustrations are for demonstration purposes only. Any knob, lever or ring pull can be combined with any style or size escutcheon plate.
Complete sets with interior mortise lock and spindle. 2 1/4” center-to-center.
Trim sets for interior mortise locks with spindle, no lock included. 2 1/4” center-to-center.
2 1/2” or 2 3/4” backset standard.Custom backsets available. Call for options and pricing.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.
954 CONTEMPORARY INTERIOR MORTISE LOCK PASSAGE & PRIVACY SETS
CS-954IML – Complete passage set with interior
mortise lock and spindle. OR TS-954IML – Trim1set only. No lock.
CS-954IML-PR – Complete privacy set with interior
mortise lock and spindle. OR TS-954IML-PR – Trim set only. No lock.
TS-954IML-FD – Trim set only. – Full dummy.
TS-954IML-HD – Trim set only. – Half dummy.
6"2 1/2" 2 1/2"
6"
2 1/2" 2 1/2"
6"
2 1/2" 2 1/2"
6"
2 1/2"
2" 2" 2" 2" 2" 2"
2 1/
4"
2"2
1/4"
Specify manufacturer & function of interior mortise lock.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.
CS-954IML Passage set. P-954OH (ext) P-954OH (int)
CS-954IML-PR Privacy set. P-954OH-IML-ERC (ext) P-954OH-IML-TPC (int)
TS-954IML-FD Full dummy. P-954OH-D (ext) P-954OH-D (int)
TS-954IML-HD Half dummy. P-954OH-D
TS-954IML Passage set. P-954OH (ext) P-954OH (int)
TS-954IML-PR Privacy set. P-954OH-IML-ERC (ext) P-954OH-IML-TPC (int)
TS-954IML-FD Full dummy. P-954OH-D (ext) P-954OH-D (int)
TS-954IML-HD Half dummy. P-954OH-D
Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m
PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.
14-124
Revised 02/08/16
Illustrations are for demonstration purposes only. Any knob, lever or ring pull can be combined with any style or size escutcheon plate.
Complete sets with interior mortise lock and spindle. 2 1/4” center-to-center.
Trim sets for interior mortise locks with spindle, no lock included. 2 1/4” center-to-center.
2 1/2” or 2 3/4” backset standard.Custom backsets available. Call for options and pricing.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.
F954 CONTEMPORARY INTERIOR MORTISE LOCK PASSAGE & PRIVACY SETS
CS-F954IML – Complete passage set with interior
mortise lock and spindle. OR TS-F954IML – Trim1set only. No lock.
CS-F954IML-PR – Complete privacy set with interior
mortise lock and spindle. OR TS-F954IML-PR – Trim set only. No lock.
TS-F954IML-FD – Trim set only. – Full dummy.
TS-F954IML-HD – Trim set only. – Half dummy.
6"2 1/2" 2 1/2"
6"
2 1/2" 2 1/2"
6"
2 1/2" 2 1/2"
6"
2 1/2"
4"4" 4"4" 4"4" 2 1/
4"
Specify manufacturer & function of interior mortise lock.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.
CS-F954IML Passage set. P-F954OH (ext) P-F954OH (int)
CS-F954IML-PR Privacy set. P-F954OH-IML-ERC (ext) P-F954OH-IML-TPC (int)
TS-F954IML-FD Full dummy. P-F954D (ext) P-F954D (int)
TS-F954IML-HD Half dummy. P-F954D
TS-F954IML Passage set. P-F954OH (ext) P-F954OH (int)
TS-F954IML-PR Privacy set. P-F954OH-IML-ERC (ext) P-F954OH-IML-TPC (int)
TS-F954IML-FD Full dummy. P-F954D (ext) P-F954D (int)
TS-F954IML-HD Half dummy. P-F954D
Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m
PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.
14-125
Revised 02/08/16
Illustrations are for demonstration purposes only. Any knob, lever or ring pull can be combined with any style or size escutcheon plate.
Complete sets with interior mortise lock and spindle. 2 1/4” center-to-center. (Shown)
Trim sets for interior mortise locks with spindle, no lock included. 2 1/4” center-to-center. (Shown)
2 1/2” or 2 3/4” backset standard.Custom backsets available. Call for options and pricing.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.
Complete sets with interior mortise lock and spindle. 2 7/8” center-to-center.
Trim sets for interior mortise locks with spindle, no lock included. 2 7/8” center-to-center.
955 CONTEMPORARY INTERIOR MORTISE LOCK PASSAGE & PRIVACY SETS
CS-955IML – Complete passage set with interior
mortise lock and spindle. OR TS-955IML – Trim set only. No lock.
CS-955IML-PR – Complete privacy set with interior
mortise lock and spindle. OR TS-955IML-PR – Trim set only. No lock.
TS-955IML-FD – Trim set only. – Full dummy.
TS-955IML-HD – Trim set only. – Half dummy.
10"
3" 3"
10"
3" 3"
10"
3" 3"
10"
3"
3 1/
4"
3 1/
4"
3 1/
4"
3 1/
4"
3 1/
4"
3 1/
4"
2 1/
4"
3 1/
4"2
1/4"
Specify manufacturer & function of interior mortise lock.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.
CS-955IML Passage set. P-955 (ext) P-955 (int)CS-955IML-PR Privacy set. P-955IML-ERC (ext) P-955IML-TPC (int)TS-955IML-FD Full dummy. P-955D (ext) P-955D (int)TS-955IML-HD Half dummy. P-955D
CS-955-8IML Passage set. P-955 (ext) P-955 (int)CS-955-8IML-PR Privacy set. P-955-8IML-ERC (ext) P-955-8IML-TPC (int)
TS-955IML Passage set. P-955 (ext) P-955 (int)TS-955IML-PR Privacy set. P-955IML-ERC (ext) P-955IML-TPC (int)TS-955IML-FD Full dummy. P-955D (ext) P-955D (int)TS-955IML-HD Half dummy. P-955D
TS-955-8IML Passage set. P-955 (ext) P-955 (int)TS-955-8IML-PR Privacy set. P-955-8IML-ERC (ext) P-955-8IML-TPC (int)
Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m
PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.
14-126
Revised 02/08/16
Illustrations are for demonstration purposes only. Any knob, lever or ring pull can be combined with any style or size escutcheon plate.
Complete sets with interior mortise lock and spindle. 2 1/4” center-to-center. (Shown)
Trim sets for interior mortise locks with spindle, no lock included. 2 1/4” center-to-center. (Shown)
2 1/2” or 2 3/4” backset standard.Custom backsets available. Call for options and pricing.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.
Complete sets with interior mortise lock and spindle. 2 7/8” center-to-center.
Trim sets for interior mortise locks with spindle, no lock included. 2 7/8” center-to-center.
F955 CONTEMPORARY INTERIOR MORTISE LOCK PASSAGE & PRIVACY SETS
CS-F955IML – Complete passage set with interior
mortise lock and spindle. OR TS-F955IML – Trim set only. No lock.
CS-F955IML-PR – Complete privacy set with interior
mortise lock and spindle. OR TS-F955IML-PR – Trim set only. No lock.
TS-F955IML-FD – Trim set only. – Full dummy.
TS-F955IML-HD – Trim set only. – Half dummy.
10"
3" 3"
10"
3" 3"
10"
3" 3"
10"
3"
6 3/
4"
2 1/
4"
6 3/
4"
6 3/
4"
6 3/
4"
6 3/
4"
6 3/
4"
Specify manufacturer & function of interior mortise lock.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.
CS-F955IML Passage set. P-F955 (ext) P-F955 (int)CS-F955IML-PR Privacy set. P-F955IML-ERC (ext) P-F955IML-TPC (int)TS-F955IML-FD Full dummy. P-F955D (ext) P-F955D (int)TS-F955IML-HD Half dummy. P-F955D
CS-F955-8IML Passage set. P-F955 (ext) P-F955 (int)CS-F955-8IML-PR Privacy set. P-F955-8IML-ERC (ext) P-F955-8IML-TPC (int)
TS-F955IML Passage set. P-F955 (ext) P-F955 (int)TS-F955IML-PR Privacy set. P-F955IML-ERC (ext) P-F955IML-TPC (int)TS-F955IML-FD Full dummy. P-F955D (ext) P-F955D (int)TS-F955IML-HD Half dummy. P-F955D
TS-F955-8IML Passage set. P-F955 (ext) P-F955 (int)TS-F955-8IML-PR Privacy set. P-F955-8IML-ERC (ext) P-F955-8IML-TPC (int)
Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m
PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.
14-127
Revised 02/08/16
Illustrations are for demonstration purposes only. Any knob, lever or ring pull can be combined with any style or size escutcheon plate.
957 CONTEMPORARY INTERIOR MORTISE LOCK PASSAGE & PRIVACY SETS
Complete sets with interior mortise lock and spindle. 2 1/4” center-to-center. (Shown)
Trim sets for interior mortise locks with spindle, no lock included. 2 1/4” center-to-center. (Shown)
2 1/2” or 2 3/4” backset standard.Custom backsets available. Call for options and pricing.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.
Complete sets with interior mortise lock and spindle. 2 7/8” center-to-center.
Trim sets for interior mortise locks with spindle, no lock included. 2 7/8” center-to-center.
Specify manufacturer & function of interior mortise lock.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.
CS-957IML – Complete passage set with interior
mortise lock and spindle. OR TS-957IML – Trim set only. No lock.
CS-957IML-PR – Complete privacy set with interior
mortise lock and spindle. OR TS-957IML-PR – Trim set only. No lock.
TS-957IML-FD – Trim set only. – Full dummy.
TS-957IML-HD – Trim set only. – Half dummy.
12"
3" 3"
12"
3" 3"
12"
3" 3"
12"
3"
3 1/
2"
3 1/
2"
3 1/
2"
3 1/
2"
3 1/
2"
3 1/
2"
2 1/
4"
3 1/
2"2
1/4"
CS-957IML Passage set. P-957 (ext) P-957 (int)CS-957IML-PR Privacy set. P-957IML-ERC (ext) P-957IML-TPC (int)TS-957IML-FD Full dummy. P-957D (ext) P-957D (int)TS-957IML-HD Half dummy. P-957D
CS-957-8IML Passage set. P-957 (ext) P-957 (int)CS-957-8IML-PR Privacy set. P-957-8IML-ERC (ext) P-957-8IML-TPC (int)
TS-957IML Passage set. P-957 (ext) P-957 (int)TS-957IML-PR Privacy set. P-957IML-ERC (ext) P-957IML-TPC (int)TS-957IML-FD Full dummy. P-957D (ext) P-957D (int)TS-957IML-HD Half dummy. P-957D
TS-957-8IML Passage set. P-957 (ext) P-957 (int)TS-957-8IML-PR Privacy set. P-957-8IML-ERC (ext) P-957-8IML-TPC (int)
Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m
PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.
14-128
Revised 02/08/16
Illustrations are for demonstration purposes only. Any knob, lever or ring pull can be combined with any style or size escutcheon plate.
F957 CONTEMPORARY INTERIOR MORTISE LOCK PASSAGE & PRIVACY SETS
Complete sets with interior mortise lock and spindle. 2 1/4” center-to-center. (Shown)
Trim sets for interior mortise locks with spindle, no lock included. 2 1/4” center-to-center. (Shown)
2 1/2” or 2 3/4” backset standard.Custom backsets available. Call for options and pricing.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.
Complete sets with interior mortise lock and spindle. 2 7/8” center-to-center.
Trim sets for interior mortise locks with spindle, no lock included. 2 7/8” center-to-center.
Specify manufacturer & function of interior mortise lock.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.
CS-F957IML – Complete passage set with interior
mortise lock and spindle. OR TS-F957IML – Trim set only. No lock.
CS-F957IML-PR – Complete privacy set with interior
mortise lock and spindle. OR TS-F957IML-PR – Trim set only. No lock.
TS-F957IML-FD – Trim set only. – Full dummy.
TS-F957IML-HD – Trim set only. – Half dummy.
12"
3" 3"
12"
3" 3"
12"
3" 3"
12"
3"
8 1/
2"
8 1/
2"
8 1/
2"
8 1/
2"
8 1/
2"
2 1/
4"
8 1/
2"
CS-F957IML Passage set. P-F957 (ext) P-F957 (int)CS-F957IML-PR Privacy set. P-F957IML-ERC (ext) P-F957IML-TPC (int)TS-F957IML-FD Full dummy. P-F957D (ext) P-F957D (int)TS-F957IML-HD Half dummy. P-F957D
CS-F957-8IML Passage set. P-F957 (ext) P-F957 (int)CS-F957-8IML-PR Privacy set. P-F957-8IML-ERC (ext) P-F957-8IML-TPC (int)
TS-F957IML Passage set. P-F957 (ext) P-F957 (int)TS-F957IML-PR Privacy set. P-F957IML-ERC (ext) P-F957IML-TPC (int)TS-F957IML-FD Full dummy. P-F957D (ext) P-F957D (int)TS-F957IML-HD Half dummy. P-F957D
TS-F957-8IML Passage set. P-F957 (ext) P-F957 (int)TS-F957-8IML-PR Privacy set. P-F957-8IML-ERC (ext) P-F957-8IML-TPC (int)
Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m
PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.
14-129
Revised 02/08/16
Illustrations are for demonstration purposes only. Any knob, lever or ring pull can be combined with any style or size escutcheon plate.
959 CONTEMPORARY INTERIOR MORTISE LOCK PASSAGE & PRIVACY SETS
Complete sets with interior mortise lock and spindle. 2 1/4” center-to-center. (Shown)
Trim sets for interior mortise locks with spindle, no lock included. 2 1/4” center-to-center. (Shown)
2 1/2” or 2 3/4” backset standard.Custom backsets available. Call for options and pricing.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.
Complete sets with interior mortise lock and spindle. 2 7/8” center-to-center.
Trim sets for interior mortise locks with spindle, no lock included. 2 7/8” center-to-center.
Specify manufacturer & function of interior mortise lock.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.
CS-959IML – Complete passage set with interior
mortise lock and spindle. OR TS-959IML – Trim set only. No lock.
CS-959IML-PR – Complete privacy set with interior
mortise lock and spindle. OR TS-959IML-PR – Trim set only. No lock.
TS-959IML-FD – Trim set only. – Full dummy.
TS-959IML-HD – Trim set only. – Half dummy.
8 3/
4"1 3/4" 1 3/4"
8 3/
4"
1 3/4" 1 3/4"
8 3/
4"
1 3/4" 1 3/4"
8 3/
4"
1 3/4"
2 9/
16"
2 9/
16"
2 9/
16"
2 9/
16"
2 9/
16"
2 9/
16"
2 9/
16"2
1/4"
2 1/
4"
CS-959IML Passage set. P-959 (ext) P-959 (int)CS-959IML-PR Privacy set. P-959IML-ERC (ext) P-959IML-TPC (int)TS-959IML-FD Full dummy. P-959D (ext) P-959D (int)TS-959IML-HD Half dummy. P-959D
CS-959-8IML Passage set. P-959 (ext) P-959 (int)CS-959-8IML-PR Privacy set. P-959-8IML-ERC (ext) P-959-8IML-TPC (int)
TS-959IML Passage set. P-959 (ext) P-959 (int)TS-959IML-PR Privacy set. P-959IML-ERC (ext) P-959IML-TPC (int)TS-959IML-FD Full dummy. P-959D (ext) P-959D (int)TS-959IML-HD Half dummy. P-959D
TS-959-8IML Passage set. P-959 (ext) P-959 (int)TS-959-8IML-PR Privacy set. P-959-8IML-ERC (ext) P-959-8IML-TPC (int)
Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m
PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.
14-130
Revised 02/08/16
Illustrations are for demonstration purposes only. Any knob, lever or ring pull can be combined with any style or size escutcheon plate.
F959 CONTEMPORARY INTERIOR MORTISE LOCK PASSAGE & PRIVACY SETS
Complete sets with interior mortise lock and spindle. 2 1/4” center-to-center. (Shown)
Trim sets for interior mortise locks with spindle, no lock included. 2 1/4” center-to-center. (Shown)
2 1/2” or 2 3/4” backset standard.Custom backsets available. Call for options and pricing.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.
Complete sets with interior mortise lock and spindle. 2 7/8” center-to-center.
Trim sets for interior mortise locks with spindle, no lock included. 2 7/8” center-to-center.
Specify manufacturer & function of interior mortise lock.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.
CS-F959IML – Complete passage set with interior
mortise lock and spindle. OR TS-F959IML – Trim set only. No lock.
CS-F959IML-PR – Complete privacy set with interior
mortise lock and spindle. – Shown w/RC-7. OR TS-F959IML-PR – Trim set only. No lock.
TS-F959IML-FD – Trim set only. – Full dummy.
TS-F959IML-HD – Trim set only. – Half dummy.
8 3/
4"
1 3/4" 1 3/4"
8 3/
4"
1 3/4" 1 3/4"
8 3/
4"
1 3/4" 1 3/4"
8 3/
4"
1 3/4"
6 3/
16"
6 3/
16"
6 3/
16"
6 3/
16"
6 3/
16"
6 3/
16" 2
1/4"
CS-F959IML Passage set. P-F959 (ext) P-F959 (int)CS-F959IML-PR Privacy set. P-F959IML-ERC (ext) P-F959IML-TPC (int)TS-F959IML-FD Full dummy. P-F959D (ext) P-F959D (int)TS-F959IML-HD Half dummy. P-F959D
CS-F959-8IML Passage set. P-F959 (ext) P-F959 (int)CS-F959-8IML-PR Privacy set. P-F959-8IML-ERC (ext) P-F959-8IML-TPC (int)
TS-F959IML Passage set. P-F959 (ext) P-F959 (int)TS-F959IML-PR Privacy set. P-F950IML-ERC (ext) P-F950IML-TPC (int)TS-F959IML-FD Full dummy. P-F959D (ext) P-F959D (int)TS-F959IML-HD Half dummy. P-F959D
TS-F959-8IML Passage set. P-F959 (ext) P-F959 (int)TS-F959-8IML-PR Privacy set. P-F959-8IML-ERC (ext) P-F959-8IML-TPC (int)
Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m
PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.
14-131
Revised 02/08/16
Illustrations are for demonstration purposes only. Any knob, lever or ring pull can be combined with any style or size escutcheon plate.
Complete sets with interior mortise lock and spindle. 2 1/4” center-to-center.
Trim sets for interior mortise locks with spindle, no lock included. 2 1/4” center-to-center.
2 1/2” or 2 3/4” backset standard.Custom backsets available. Call for options and pricing.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.
979 CONTEMPORARY INTERIOR MORTISE LOCK PASSAGE & PRIVACY SETS
CS-979IML – Complete passage set with interior
mortise lock and spindle. OR TS-979IML – Trim set only. No lock.
CS-979IML-PR – Complete privacy set with interior
mortise lock and spindle. OR TS-979IML-PR – Trim set only. No lock.
TS-979IML-FD – Trim set only. – Full dummy.
TS-979IML-HD – Trim set only. – Half dummy.
6"
1 1/2" 1 1/2"
6"
1 1/2" 1 1/2"
6"
1 1/2" 1 1/2"
6"
1 1/2"
2" 2" 2" 2" 2" 2" 2"
2 1/
4"
2 1/
4"
Specify manufacturer & function of interior mortise lock.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.
CS-979IML Passage set. P-979OH (ext) P-979OH (int)
CS-979IML-PR Privacy set. P-979OH-IML-ERC (ext) P-979OH-IML-TPC (int)
TS-979IML-FD Full dummy. P-979OH-D (ext) P-979OH-D (int)
TS-979IML-HD Half dummy. P-979OH-D
TS-979IML Passage set. P-979OH (ext) P-979OH (int)
TS-979IML-PR Privacy set. P-979OH-IML-ERC (ext) P-979OH-IML-TPC (int)
TS-979IML-FD Full dummy. P-979OH-D (ext) P-979OH-D (int)
TS-979IML-HD Half dummy. P-979OH-D
Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m
PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.
14-132
Revised 02/08/16
Illustrations are for demonstration purposes only. Any knob, lever or ring pull can be combined with any style or size escutcheon plate.
Complete sets with interior mortise lock and spindle. 2 1/4” center-to-center.
Trim sets for interior mortise locks with spindle, no lock included. 2 1/4” center-to-center.
2 1/2” or 2 3/4” backset standard.Custom backsets available. Call for options and pricing.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.
F979 CONTEMPORARY INTERIOR MORTISE LOCK PASSAGE & PRIVACY SETS
CS-F979IML – Complete passage set with interior
mortise lock and spindle. OR TS-F979IML – Trim set only. No lock.
CS-F979IML-PR – Complete privacy set with interior
mortise lock and spindle. OR TS-F979IML-PR – Trim set only. No lock.
TS-F979IML-FD – Trim set only. – Full dummy.
TS-F979IML-HD – Trim set only. – Half dummy.
6"
1 1/2" 1 1/2"
6"
1 1/2" 1 1/2"
6"
1 1/2" 1 1/2"
6"
1 1/2"
4"4" 4"4" 4"4" 2 1/
4"
Specify manufacturer & function of interior mortise lock.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.
CS-F979IML Passage set. P-F979OH (ext) P-F979OH (int)
CS-F979IML-PR Privacy set. P-F979OH-IML-ERC (ext) P-F979OH-IML-TPC (int)
TS-F979IML-FD Full dummy. P-F979OH-D (ext) P-F979OH-D (int)
TS-F979IML-HD Half dummy. P-F979OH-D
TS-F979IML Passage set. P-F979OH (ext) P-F979OH (int)
TS-F979IML-PR Privacy set. P-F979OH-IML-ERC (ext) P-F979OH-IML-TPC (int)
TS-F979IML-FD Full dummy. P-F979OH-D (ext) P-F979OH-D (int)
TS-F979IML-HD Half dummy. P-F979OH-D
Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m
PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.
14-133
Revised 02/08/16
Illustrations are for demonstration purposes only. Any knob, lever or ring pull can be combined with any style or size escutcheon plate.
Complete sets with interior mortise lock and spindle. 2 1/4” center-to-center. (Shown)
Trim sets for interior mortise locks with spindle, no lock included. 2 1/4” center-to-center. (Shown)
Complete sets with interior mortise lock and spindle. 2 7/8” center-to-center.
Trim sets for interior mortise locks with spindle, no lock included. 2 7/8” center-to-center.
2 1/2” or 2 3/4” backset standard.Custom backsets available. Call for options and pricing.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.
980 CONTEMPORARY INTERIOR MORTISE LOCK PASSAGE & PRIVACY SETS
CS-980IML – Complete passage set with interior
mortise lock and spindle. OR TS-980IML – Trim set only. No lock.
CS-980IML-PR – Complete privacy set with interior
mortise lock and spindle. OR TS-980IML-PR – Trim set only. No lock.
TS-980IML-FD – Trim set only. – Full dummy.
TS-980IML-HD – Trim set only. – Half dummy.
10 1
/2"
1 1/2" 1 1/2"
10 1
/2"
1 1/2" 1 1/2"
10 1
/2"
1 1/2" 1 1/2"
10 1
/2"
1 1/2"
4" 4" 4" 4" 4" 4"
2 1/
4"
4"2
1/4"
Specify manufacturer & function of interior mortise lock.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.
CS-980IML Passage set. P-980 (ext) P-980 (int)CS-980IML-PR Privacy set. P-980IML-ERC (ext) P-980IML-TPC (int)TS-980IML-FD Full dummy. P-980D (ext) P-980D (int)TS-980IML-HD Half dummy. P-980D
CS-980-8IML Passage set. P-980 (ext) P-980 (int)CS-980-8IML-PR Privacy set. P-980-8IML-ERC (ext) P-980-8IML-TPC (int)
TS-980IML Passage set. P-980 (ext) P-980 (int)TS-980IML-PR Privacy set. P-980IML-ERC (ext) P-980IML-TPC (int)TS-980IML-FD Full dummy. P-980D (ext) P-980D (int)TS-980IML-HD Half dummy. P-980D
TS-980-8IML Passage set. P-980 (ext) P-980 (int)TS-980-8IML-PR Privacy set. P-980-8IML-ERC (ext) P-980-8IML-TPC (int)
Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m
PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.
14-134
Revised 02/08/16
Illustrations are for demonstration purposes only. Any knob, lever or ring pull can be combined with any style or size escutcheon plate.
Complete sets with interior mortise lock and spindle. 2 1/4” center-to-center. (Shown)
Trim sets for interior mortise locks with spindle, no lock included. 2 1/4” center-to-center. (Shown)
Complete sets with interior mortise lock and spindle. 2 7/8” center-to-center.
Trim sets for interior mortise locks with spindle, no lock included. 2 7/8” center-to-center.
2 1/2” or 2 3/4” backset standard.Custom backsets available. Call for options and pricing.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.
F980 CONTEMPORARY INTERIOR MORTISE LOCK PASSAGE & PRIVACY SETS
CS-F980IML – Complete passage set with interior
mortise lock and spindle. OR TS-F980IML – Trim set only. No lock.
CS-F980IML-PR – Complete privacy set with interior
mortise lock and spindle. OR TS-F980IML-PR – Trim set only. No lock.
TS-F980IML-FD – Trim set only. – Full dummy.
TS-F980IML-HD – Trim set only. – Half dummy.
10 1
/2"
1 1/2" 1 1/2"
10 1
/2"
1 1/2" 1 1/2"
10 1
/2"
1 1/2" 1 1/2"
10 1
/2"
1 1/2"
6 1/
2"
6 1/
2"
6 1/
2"
6 1/
2"
6 1/
2"
6 1/
2"
2 1/
4"
Specify manufacturer & function of interior mortise lock.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.
CS-F980IML Passage set. P-F980 (ext) P-F980 (int)CS-F980IML-PR Privacy set. P-F980IML-ERC (ext) P-F980IML-TPC (int)TS-F980IML-FD Full dummy. P-F980D (ext) P-F980D (int)TS-F980IML-HD Half dummy. P-F980D
CS-F980-8IML Passage set. P-F980 (ext) P-F980 (int)CS-F980-8IML-PR Privacy set. P-F980-8IML-ERC (ext) P-F980-8IML-TPC (int)
TS-F980IML Passage set. P-F980 (ext) P-F980 (int)TS-F980IML-PR Privacy set. P-F980IML-ERC (ext) P-F980IML-TPC (int)TS-F980IML-FD Full dummy. P-F980D (ext) P-F980D (int)TS-F980IML-HD Half dummy. P-F980D
TS-F980-8IML Passage set. P-F980 (ext) P-F980 (int)TS-F980-8IML-PR Privacy set. P-F980-8IML-ERC (ext) P-F980-8IML-TPC (int)
Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m
PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.
14-135
Revised 02/08/16
Illustrations are for demonstration purposes only. Any knob, lever or ring pull can be combined with any style or size escutcheon plate.
Complete sets with interior mortise lock and spindle. 2 7/8” center-to-center.
Trim sets for interior mortise locks with spindle, no lock included. 2 7/8” center-to-center.
Trim sets for interior mortise locks with spindle, no lock included. 2 1/4” center-to-center. (Shown)
2 1/2” or 2 3/4” backset standard.Custom backsets available. Call for options and pricing.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.
Complete sets with interior mortise lock and spindle. 2 1/4” center-to-center. (Shown)
1240 FLEUR DE LIS INTERIOR MORTISE LOCK PASSAGE & PRIVACY SETS
CS-1240IML – Complete passage set with interior
mortise lock and spindle. OR TS-1240IML – Trim set only. No lock.
CS-1240IML-PR – Complete privacy set with interior
mortise lock and spindle. OR TS-1240IML-PR – Trim set only. No lock.
TS-1240IML-FD – Trim set only. – Full dummy.
TS-1240IML-HD – Trim set only. – Half dummy.
15 1
/2"
1 3/4" 1 3/4"
15 1
/2"
1 3/4" 1 3/4"
15 1
/2"
1 3/4" 1 3/4"
15 1
/2"
1 3/4"
5 1/
4"
5 1/
4"
5 1/
4"
5 1/
4"
5 1/
4"
5 1/
4"
2 1/
4"
5 1/
4"2
1/4"
Specify manufacturer & function of interior mortise lock.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.
CS-1240IML Passage set. P-1240 (ext) P-1240 (int)CS-1240IML-PR Privacy set. P-1240IML-ERC (ext) P-1240IML-TPC (int)TS-1240IML-FD Full dummy. P-1240D (ext) P-1240D (int)TS-1240IML-HD Half dummy. P-1240D
CS-1240-8IML Passage set. P-1240 (ext) P-1240 (int)CS-1240-8IML-PR Privacy set. P-1240-8IML-ERC (ext) P-1240-8IML-TPC (int)
TS-1240IML Passage set. P-1240 (ext) P-1240 (int)TS-1240IML-PR Privacy set. P-1240IML-ERC (ext) P-1240IML-TPC (int)TS-1240IML-FD Full dummy. P-1240D (ext) P-1240D (int)TS-1240IML-HD Half dummy. P-1240D
TS-1240-8IML Passage set. P-1240 (ext) P-1240 (int)TS-1240-8IML-PR Privacy set. P-1240-8IML-ERC (ext) P-1240-8IML-TPC (int)
Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m
PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.
14-136
Revised 02/08/16
Illustrations are for demonstration purposes only. Any knob, lever or ring pull can be combined with any style or size escutcheon plate.
Complete sets with interior mortise lock and spindle. 2 7/8” center-to-center.
Trim sets for interior mortise locks with spindle, no lock included. 2 7/8” center-to-center.
Trim sets for interior mortise locks with spindle, no lock included. 2 1/4” center-to-center. (Shown)
2 1/2” or 2 3/4” backset standard.Custom backsets available. Call for options and pricing.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.
Complete sets with interior mortise lock and spindle. 2 1/4” center-to-center. (Shown)
F1240 FLEUR DE LIS INTERIOR MORTISE LOCK PASSAGE & PRIVACY SETS
CS-F1240IML – Complete passage set with interior
mortise lock and spindle. OR TS-F1240IML – Trim set only. No lock.
CS-F1240IML-PR – Complete privacy set with interior
mortise lock and spindle. OR TS-F1240IML-PR – Trim set only. No lock.
TS-F1240IML-FD – Trim set only. – Full dummy.
TS-F1240IML-HD – Trim set only. – Half dummy.
15 1
/2"
1 3/4" 1 3/4"
15 1
/2"
1 3/4" 1 3/4"
15 1
/2"
1 3/4" 1 3/4"
15 1
/2"
1 3/4"
10 3
/8"
10 3
/8"
10 3
/8"
10 3
/8"
10 3
/8"
10 3
/8"
2 1/
4"
Specify manufacturer & function of interior mortise lock.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.
CS-F1240IML Passage set. P-F1240 (ext) P-F1240 (int)CS-F1240IML-PR Privacy set. P-F1240IML-ERC (ext) P-F1240IML-TPC (int)TS-F1240IML-FD Full dummy. P-F1240D (ext) P-F1240D (int)TS-F1240IML-HD Half dummy. P-F1240D
CS-F1240-8IML Passage set. P-F1240 (ext) P-F1240 (int)CS-F1240-8IML-PR Privacy set. P-F1240-8IML-ERC (ext) P-F1240-8IML-TPC (int)
TS-F1240IML Passage set. P-F1240 (ext) P-F1240 (int)TS-F1240IML-PR Privacy set. P-F1240IML-ERC (ext) P-F1240IML-TPC (int)TS-F1240IML-FD Full dummy. P-F1240D (ext) P-F1240D (int)TS-F1240IML-HD Half dummy. P-F1240D
TS-F1240-8IML Passage set. P-F1240 (ext) P-F1240 (int)TS-F1240-8IML-PR Privacy set. P-F1240-8IML-ERC (ext) P-F1240-8IML-TPC (int)
Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m
PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.
14-137
Revised 02/08/16
Illustrations are for demonstration purposes only. Any knob, lever or ring pull can be combined with any style or size escutcheon plate.
Complete sets with interior mortise lock and spindle. 2 7/8” center-to-center.
Trim sets for interior mortise locks with spindle, no lock included. 2 7/8” center-to-center.
Trim sets for interior mortise locks with spindle, no lock included. 2 1/4” center-to-center. (Shown)
2 1/2” or 2 3/4” backset standard.Custom backsets available. Call for options and pricing.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.
Complete sets with interior mortise lock and spindle. 2 1/4” center-to-center. (Shown)
1245 FLEUR DE LIS INTERIOR MORTISE LOCK PASSAGE & PRIVACY SETS
CS-1245IML – Complete passage set with interior
mortise lock and spindle. OR TS-1245IML – Trim set only. No lock.
CS-1245IML-PR – Complete privacy set with interior
mortise lock and spindle. OR TS-1245IML-PR – Trim set only. No lock.
TS-1245IML-FD – Trim set only. – Full dummy.
TS-1245IML-HD – Trim set only. – Half dummy.
15 1
/2"
2 1/2" 2 1/2"
15 1
/2"
2 1/2" 2 1/2"
15 1
/2"
2 1/2" 2 1/2"
15 1
/2"
2 1/2"
6" 6" 6" 6"6" 6"
2 1/
4"
6"2
1/4"
Specify manufacturer & function of interior mortise lock.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.
CS-1245IML Passage set. P-1245IML (ext) P-1245IML (int)CS-1245IML-PR Privacy set. P-1245IML-ERC (ext) P-1245IML-TPC (int)TS-1245IML-FD Full dummy. P-1245D (ext) P-1245D (int)TS-1245IML-HD Half dummy. P-1245D
CS-1245-8IML Passage set. P-1245IML (ext) P-1245IML (int)CS-1245-8IML-PR Privacy set. P-1245-8IML-ERC (ext) P-1245-8IML-TPC (int)
TS-1245IML Passage set. P-1245IML (ext) P-1245IML (int)TS-1245IML-PR Privacy set. P-1245IML-ERC (ext) P-1245IML-TPC (int)TS-1245IML-FD Full dummy. P-1245D (ext) P-1245D (int)TS-1245IML-HD Half dummy. P-1245D
TS-1245-8IML Passage set. P-1245IML (ext) P-1245IML (int)TS-1245-8IML-PR Privacy set. P-1245-8IML-ERC (ext) P-1245-8IML-TPC (int)
Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m
PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.
14-138
Revised 02/08/16
Illustrations are for demonstration purposes only. Any knob, lever or ring pull can be combined with any style or size escutcheon plate.
Complete sets with interior mortise lock and spindle. 2 7/8” center-to-center.
Trim sets for interior mortise locks with spindle, no lock included. 2 7/8” center-to-center.
Trim sets for interior mortise locks with spindle, no lock included. 2 1/4” center-to-center. (Shown)
2 1/2” or 2 3/4” backset standard.Custom backsets available. Call for options and pricing.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.
Complete sets with interior mortise lock and spindle. 2 1/4” center-to-center. (Shown).
F1245 FLEUR DE LIS INTERIOR MORTISE LOCK PASSAGE & PRIVACY SETS
CS-F1245IML – Complete passage set with interior
mortise lock and spindle. OR TS-F1245IML – Trim set only. No lock.
CS-F1245IML-PR – Complete privacy set with interior
mortise lock and spindle. OR TS-F1245IML-PR – Trim set only. No lock.
TS-F1245IML-FD – Trim set only. – Full dummy.
TS-F1245IML-HD – Trim set only. – Half dummy.
15 1
/2"
2 1/2" 2 1/2"
15 1
/2"
2 1/2" 2 1/2"
15 1
/2"
2 1/2" 2 1/2"
15 1
/2"
2 1/2"
9 1/
2"
9 1/
2"
9 1/
2"
9 1/
2"
9 1/
2"
9 1/
2"
2 1/
4"
Specify manufacturer & function of interior mortise lock.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.
CS-F1245IML Passage set. P-F1245IML (ext) P-F1245IML (int)CS-F1245IML-PR Privacy set. P-F1245IML-ERC (ext) P-F1245IML-TPC (int)TS-F1245IML-FD Full dummy. P-F1245D (ext) P-F1245D (int)TS-F1245IML-HD Half dummy. P-F1245D
CS-F1245-8IML Passage set. P-F1245IML (ext) P-F1245IML (int)CS-F1245-8IML-PR Privacy set. P-F1245-8IML-ERC (ext) P-F1245-8IML-TPC (int)
TS-F1245IML Passage set. P-F1245IML (ext) P-F1245IML (int)TS-F1245IML-PR Privacy set. P-F1245IML-ERC (ext) P-F1245IML-TPC (int)TS-F1245IML-FD Full dummy. P-F1245D (ext) P-F1245D (int)TS-F1245IML-HD Half dummy. P-F1245D
TS-F1245-8IML Passage set. P-F1245IML (ext) P-F1245IML (int)TS-F1245-8IML-PR Privacy set. P-F1245-8IML-ERC (ext) P-F1245-8IML-TPC (int)
Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m
PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.
14-139
Revised 02/08/16
Illustrations are for demonstration purposes only. Any knob, lever or ring pull can be combined with any style or size escutcheon plate.
Complete sets with interior mortise lock and spindle. 2 7/8” center-to-center.
Trim sets for interior mortise locks with spindle, no lock included. 2 7/8” center-to-center.
Trim sets for interior mortise locks with spindle, no lock included. 2 1/4” center-to-center. (Shown)
2 1/2” or 2 3/4” backset standard.Custom backsets available. Call for options and pricing.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.
Complete sets with interior mortise lock and spindle. 2 1/4” center-to-center. (Shown)
1250 FLEUR DE LIS INTERIOR MORTISE LOCK PASSAGE & PRIVACY SETS
CS-1250IML – Complete passage set with interior
mortise lock and spindle. OR TS-1250IML – Trim set only. No lock.
CS-1250IML-PR – Complete privacy set with interior
mortise lock and spindle. OR TS-1250IML-PR – Trim set only. No lock.
TS-1250IML-FD – Trim set only. – Full dummy.
TS-1250IML-HD – Trim set only. – Half dummy.
21 1
/2"
3" 3"
21 1
/2"
3" 3"
21 1
/2"
3" 3"
21 1
/2"
3"8
1/2"
8 1/
2"
8 1/
2"
8 1/
2"
8 1/
2"
8 1/
2"
2 1/
4"
8 1/
2"2
1/4"
Specify manufacturer & function of interior mortise lock.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.
CS-1250IML Passage set. P-1250IML (ext) P-1250IML (int)CS-1250IML-PR Privacy set. P-1250IML-ERC (ext) P-1250IML-TPC (int)TS-1250IML-FD Full dummy. P-1250D (ext) P-1250D (int)TS-1250IML-HD Half dummy. P-1250D
CS-1250-8IML Passage set. P-1250IML (ext) P-1250IML (int)CS-1250-8IML-PR Privacy set. P-1250-8IML-ERC (ext) P-1250-8IML-TPC (int)
TS-1250IML Passage set. P-1250IML (ext) P-1250IML (int)TS-1250IML-PR Privacy set. P-1250IML-ERC (ext) P-1250IML-TPC (int)TS-1250IML-FD Full dummy. P-1250D (ext) P-1250D (int)TS-1250IML-HD Half dummy. P-1250D
TS-1250-8IML Passage set. P-1250IML (ext) P-1250IML (int)TS-1250-8IML-PR Privacy set. P-1250-8IML-ERC (ext) P-1250-8IML-TPC (int)
Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m
PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.
14-140
Revised 02/08/16
Illustrations are for demonstration purposes only. Any knob, lever or ring pull can be combined with any style or size escutcheon plate.
Complete sets with interior mortise lock and spindle. 2 7/8” center-to-center.
Trim sets for interior mortise locks with spindle, no lock included. 2 7/8” center-to-center.
Trim sets for interior mortise locks with spindle, no lock included. 2 1/4” center-to-center. (Shown)
2 1/2” or 2 3/4” backset standard.Custom backsets available. Call for options and pricing.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.
Complete sets with interior mortise lock and spindle. 2 1/4” center-to-center. (Shown)
F1250 FLEUR DE LIS INTERIOR MORTISE LOCK PASSAGE & PRIVACY SETS
CS-F1250IML – Complete passage set with interior
mortise lock and spindle. OR TS-1250IML – TrFim set only. No lock.
CS-F1250IML-PR – Complete privacy set with interior
mortise lock and spindle. OR TS-F1250IML-PR – Trim set only. No lock.
TS-F1250IML-FD – Trim set only. – Full dummy.
TS-F1250IML-HD – Trim set only. – Half dummy.
21 1
/2"
3" 3"
21 1
/2"
3" 3"
21 1
/2"
3" 3"
21 1
/2"
3"
13"
13"
13"
13"
13"
13"
2 1/
4"
Specify manufacturer & function of interior mortise lock.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.
CS-F1250IML Passage set. P-F1250IML (ext) P-F1250IML (int)CS-F1250IML-PR Privacy set. P-F1250IML-ERC (ext) P-F1250IML-TPC (int)TS-F1250IML-FD Full dummy. P-F1250D (ext) P-F1250D (int)TS-F1250IML-HD Half dummy. P-F1250D
CS-F1250-8IML Passage set. P-F1250IML (ext) P-F1250IML (int)CS-F1250-8IML-PR Privacy set. P-F1250-8IML-ERC (ext) P-F1250-8IML-TPC (int)
TS-F1250IML Passage set. P-F1250IML (ext) P-F1250IML (int)TS-F1250IML-PR Privacy set. P-F1250IML-ERC (ext) P-F1250IML-TPC (int)TS-F1250IML-FD Full dummy. P-F1250D (ext) P-F1250D (int)TS-F1250IML-HD Half dummy. P-F1250D
TS-F1250-8IML Passage set. P-F1250IML (ext) P-F1250IML (int)TS-F1250-8IML-PR Privacy set. P-F1250-8IML-ERC (ext) P-F1250-8IML-TPC (int)
Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m
PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.
14-141
Revised 02/08/16
Illustrations are for demonstration purposes only. Any knob, lever or ring pull can be combined with any style or size escutcheon plate.
Complete sets with interior mortise lock and spindle. 2 1/4” center-to-center.
Trim sets for interior mortise locks with spindle, no lock included. 2 1/4” center-to-center.
2 1/2” or 2 3/4” backset standard.Custom backsets available. Call for options and pricing.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.
325 RIDGE INTERIOR MORTISE LOCK PASSAGE & PRIVACY SETS
CS-325IML – Complete passage set with interior
mortise lock and spindle. OR TS-325IML – Trim set only. No lock.
CS-325IML-PR – Complete privacy set with interior
mortise lock and spindle. OR TS-325IML-PR – Trim set only. No lock.
TS-325IML-FD – Trim set only. – Full dummy.
TS-325IML-HD – Trim set only. – Half dummy.
6"
2 1/2" 2 1/2"
6"
2 1/2" 2 1/2"
6"
2 1/2" 2 1/2"
6"
2 1/2"
2 1/
16"
2 1/
16"
2 1/
16"
2 1/
16"
2 1/
16"
2 1/
16"2
1/4"
2 1/
16" 2
1/4
"
Specify manufacturer & function of interior mortise lock.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.
CS-325IML Passage set. P-325OH (ext) P-325OH (int)
CS-325IML-PR Privacy set. P-325OH-IML-ERC (ext) P-325OH-IML-TPC (int)
TS-325IML-FD Full dummy. P-325OH-D (ext) P-325OH-D (int)
TS-325IML-HD Half dummy. P-325OH-D
TS-325IML Passage set. P-325OH (ext) P-325OH (int)
TS-325IML-PR Privacy set. P-325OH-IML-ERC (ext) P-325OH-IML-TPC (int)
TS-325IML-FD Full dummy. P-325OH-D (ext) P-325OH-D (int)
TS-325IML-HD Half dummy. P-325OH-D
Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m
PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.
14-142
Revised 02/08/16
Illustrations are for demonstration purposes only. Any knob, lever or ring pull can be combined with any style or size escutcheon plate.
Complete sets with interior mortise lock and spindle. 2 1/4” center-to-center.
Trim sets for interior mortise locks with spindle, no lock included. 2 1/4” center-to-center.
2 1/2” or 2 3/4” backset standard.Custom backsets available. Call for options and pricing.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.
F325 RIDGE INTERIOR MORTISE LOCK PASSAGE & PRIVACY SETS
CS-F325IML – Complete passage set with interior
mortise lock and spindle. OR TS-F325IML – Trim set only. No lock.
CS-F325IML-PR – Complete privacy set with interior
mortise lock and spindle. OR TS-F325IML-PR – Trim set only. No lock.
TS-F325IML-FD – Trim set only. – Full dummy.
TS-F325IML-HD – Trim set only. – Half dummy.
6"2 1/2" 2 1/2"
6"
2 1/2" 2 1/2"
6"
2 1/2" 2 1/2"
6"
2 1/2"
3 15
/16"
3 15
/16"
3 15
/16"
3 15
/16"
3 15
/16"
3 15
/6"
2 1/
4"
Specify manufacturer & function of interior mortise lock.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.
CS-F325IML Passage set. P-F325OH (ext) P-F325OH (int)
CS-F325IML-PR Privacy set. P-F325OH-IML-ERC (ext) P-F325OH-IML-TPC (int)
TS-F325IML-FD Full dummy. P-F325OH-D (ext) P-F325OH-D (int)
TS-F325IML-HD Half dummy. P-F325OH-D
TS-F325IML Passage set. P-F325OH (ext) P-F325OH (int)
TS-F325IML-PR Privacy set. P-F325OH-IML-ERC (ext) P-F325OH-IML-TPC (int)
TS-F325IML-FD Full dummy. P-F325OH-D (ext) P-F325OH-D (int)
TS-F325IML-HD Half dummy. P-F325OH-D
Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m
PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.
14-143
Revised 02/08/16
Illustrations are for demonstration purposes only. Any knob, lever or ring pull can be combined with any style or size escutcheon plate.
Complete sets with interior mortise lock and spindle. 2 1/4” center-to-center.
Trim sets for interior mortise locks with spindle, no lock included. 2 1/4” center-to-center.
2 1/2” or 2 3/4” backset standard.Custom backsets available. Call for options and pricing.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.
326 RIDGE INTERIOR MORTISE LOCK PASSAGE & PRIVACY SETS
CS-326IML – Complete passage set with interior
mortise lock and spindle. OR TS-326IML – Trim set only. No lock.
CS-326IML-PR – Complete privacy set with interior
mortise lock and spindle. OR TS-326IML-PR – Trim set only. No lock.
TS-326IML-FD – Trim set only. – Full dummy.
TS-326IML-HD – Trim set only. – Half dummy.
6"
3" 3"
6"
3" 3"
6"
3" 3"
6"
3"
1 7/
8"
1 7/
8"
1 7/
8"
1 7/
8"
1 7/
8"
1 7/
8"
2 1/
4"
1 7/
8"2
1/4"
Specify manufacturer & function of interior mortise lock.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.
CS-326IML Passage set. P-326OH (ext) P-326OH (int)
CS-326IML-PR Privacy set. P-326OH-IML-ERC (ext) P-326OH-IML-TPC (int)
TS-326IML-FD Full dummy. P-326OH-D (ext) P-326OH-D (int)
TS-326IML-HD Half dummy. P-326OH-D
TS-326IML Passage set. P-326OH (ext) P-326OH (int)
TS-326IML-PR Privacy set. P-326OH-IML-ERC (ext) P-326OH-IML-TPC (int)
TS-326IML-FD Full dummy. P-326OH-D (ext) P-326OH-D (int)
TS-326IML-HD Half dummy. P-326OH-D
Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m
PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.
14-144
Revised 02/08/16
Illustrations are for demonstration purposes only. Any knob, lever or ring pull can be combined with any style or size escutcheon plate.
Complete sets with interior mortise lock and spindle. 2 1/4” center-to-center.
Trim sets for interior mortise locks with spindle, no lock included. 2 1/4” center-to-center.
2 1/2” or 2 3/4” backset standard.Custom backsets available. Call for options and pricing.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.
F326 RIDGE INTERIOR MORTISE LOCK PASSAGE & PRIVACY SETS
CS-F326IML – Complete passage set with interior
mortise lock and spindle. OR TS-F326IML – Trim set only. No lock.
CS-F326IML-PR – Complete privacy set with interior
mortise lock and spindle. OR TS-F326IML-PR – Trim set only. No lock.
TS-F326IML-FD – Trim set only. – Full dummy.
TS-F326IML-HD – Trim set only. – Half dummy.
6"3" 3"
6"
3" 3"
6"
3" 3"
6"
3"
4 1/
8"
4 1/
8"
4 1/
8"
4 1/
8"
4 1/
8"
4 1/
8"
2 1/
4"
Specify manufacturer & function of interior mortise lock.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.
CS-F326IML Passage set. P-F326OH (ext) P-F326OH (int)
CS-F326IML-PR Privacy set. P-F326OH-IML-ERC (ext) P-F326OH-IML-TPC (int)
TS-F326IML-FD Full dummy. P-F326OH-D (ext) P-F326OH-D (int)
TS-F326IML-HD Half dummy. P-F326OH-D
TS-F326IML Passage set. P-F326OH (ext) P-F326OH (int)
TS-F326IML-PR Privacy set. P-F326OH-IML-ERC (ext) P-F326OH-IML-TPC (int)
TS-F326IML-FD Full dummy. P-F326OH-D (ext) P-F326OH-D (int)
TS-F326IML-HD Half dummy. P-F326OH-D
Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m
PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.
14-145
Revised 02/08/16
Illustrations are for demonstration purposes only. Any knob, lever or ring pull can be combined with any style or size escutcheon plate.
Complete sets with interior mortise lock and spindle. 2 1/4” center-to-center. (Shown).
Trim sets for interior mortise locks with spindle, no lock included. 2 1/4” center-to-center. (Shown)
2 1/2” or 2 3/4” backset standard.Custom backsets available. Call for options and pricing.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.
421 RIDGE INTERIOR MORTISE LOCK PASSAGE & PRIVACY SETS
CS-421IML – Complete passage set with interior
mortise lock and spindle. OR TS-421IML – Trim set only. No lock.
CS-421IML-PR – Complete privacy set with interior
mortise lock and spindle. OR TS-421IML-PR – Trim set only. No lock.
TS-421IML-FD – Trim set only. – Full dummy.
TS-421IML-HD – Trim set only. – Half dummy.
8 3/
4"
2 1/2" 2 1/2"
8 3/
4"
2 1/2" 2 1/2"
8 3/
4"
2 1/2" 2 1/2"
8 3/
4"
2 1/2"
2 3/
4"
2 3/
4"
2 3/
4"
2 3/
4"
2 3/
4"
2 3/
4"
2 1/
4"
2 3/
4"2
1/4"
Complete sets with interior mortise lock and spindle. 2 7/8” center-to-center.
Trim sets for interior mortise locks with spindle, no lock included. 2 7/8” center-to-center.
Specify manufacturer & function of interior mortise lock.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.
CS-421IML Passage set. P-421 (ext) P-421 (int)CS-421IML-PR Privacy set. P-421IML-ERC (ext) P-421IML-TPC (int)TS-421IML-FD Full dummy. P-421D (ext) P-421D (int)TS-421IML-HD Half dummy. P-421D
TS-421IML Passage set. P-421 (ext) P-421 (int)TS-421IML-PR Privacy set. P-421IML-ERC (ext) P-421IML-TPC (int)TS-421IML-FD Full dummy. P-421D (ext) P-421D (int)TS-421IML-HD Half dummy. P-421D
CS-421-8IML Passage set. P-421 (ext) P-421 (int)CS-421-8IML-PR Privacy set. P-421-8IML-ERC (ext) P-421-8IML-TPC (int)
TS-421-8IML Passage set. P-421 (ext) P-421 (int)TS-421-8IML-PR Privacy set. P-421-8IML-ERC (ext) P-421-8IML-TPC (int)
Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m
PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.
14-146
Revised 02/08/16
Illustrations are for demonstration purposes only. Any knob, lever or ring pull can be combined with any style or size escutcheon plate.
Complete sets with interior mortise lock and spindle. 2 1/4” center-to-center. (Shown)
Trim sets for interior mortise locks with spindle, no lock included. 2 1/4” center-to-center. (Shown)
Complete sets with interior mortise lock and spindle. 2 7/8” center-to-center.
Trim sets for interior mortise locks with spindle, no lock included. 2 7/8” center-to-center.
2 1/2” or 2 3/4” backset standard.Custom backsets available. Call for options and pricing.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.
F421 RIDGE INTERIOR MORTISE LOCK PASSAGE & PRIVACY SETS
CS-F421IML – Complete passage set with interior
mortise lock and spindle. OR TS-F421IML – Trim set only. No lock.
CS-F421IML-PR – Complete privacy set with interior
mortise lock and spindle. OR TS-F421IML-PR – Trim set only. No lock.
TS-F421IML-FD – Trim set only. – Full dummy.
TS-F421IML-HD – Trim set only. – Half dummy.
8 3/
4"2 1/2" 2 1/2"
8 3/
4"
2 1/2" 2 1/2"
8 3/
4"
2 1/2" 2 1/2"
8 3/
4"
2 1/2"
6"6" 6"6" 6"6"
2 1/
4"
Specify manufacturer & function of interior mortise lock.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.
CS-F421IML Passage set. P-F421 (ext) P-F421 (int)CS-F421IML-PR Privacy set. P-F421IML-ERC (ext) P-F421IML-TPC (int)TS-F421IML-FD Full dummy. P-F421D (ext) P-F421D (int)TS-F421IML-HD Half dummy. P-F421D
CS-F421-8IML Passage set. P-F421 (ext) P-F421 (int)CS-F421-8IML-PR Privacy set. P-F421-8IML-ERC (ext) P-F421-8IML-TPC (int)
TS-F421IML Passage set. P-F421 (ext) P-F421 (int)TS-F421IML-PR Privacy set. P-F421IML-ERC (ext) P-F421IML-TPC (int)TS-F421IML-FD Full dummy. P-F421D (ext) P-F421D (int)TS-F421IML-HD Half dummy. P-F421D
TS-F421-8IML Passage set. P-F421 (ext) P-F421 (int)TS-F421-8IML-PR Privacy set. P-F421-8IML-ERC (ext) P-F421-8IML-TPC (int)
Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m
PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.
14-147
Revised 02/08/16
Illustrations are for demonstration purposes only. Any knob, lever or ring pull can be combined with any style or size escutcheon plate.
Complete sets with interior mortise lock and spindle. 2 1/4” center-to-center. (Shown)
Trim sets for interior mortise locks with spindle, no lock included. 2 1/4” center-to-center. (Shown)
2 1/2” or 2 3/4” backset standard.Custom backsets available. Call for options and pricing.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.
Complete sets with interior mortise lock and spindle. 2 7/8” center-to-center.
Trim sets for interior mortise locks with spindle, no lock included. 2 7/8” center-to-center.
422 RIDGE INTERIOR MORTISE LOCK PASSAGE & PRIVACY SETS
CS-422IML – Complete passage set with interior
mortise lock and spindle. OR TS-422IML – Trim set only. No lock.
CS-422IML-PR – Complete privacy set with interior
mortise lock and spindle. OR TS-422IML-PR – Trim set only. No lock.
TS-422IML-FD – Trim set only. – Full dummy.
TS-422IML-HD – Trim set only. – Half dummy.
10"
3" 3"
10"
3" 3"
10"
3" 3"
10"
3"
3 1/
4"
3 1/
4"
3 1/
4"
3 1/
4"
3 1/
4"
3 1/
4"
2 1/
4"
3 1/
4"2
1/4"
Specify manufacturer & function of interior mortise lock.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.
CS-422IML Passage set. P-422 (ext) P-422 (int)CS-422IML-PR Privacy set. P-422IML-ERC (ext) P-422IML-TPC (int)TS-422IML-FD Full dummy. P-422D (ext) P-422D (int)TS-422IML-HD Half dummy. P-422D
CS-422-8IML Passage set. P-422 (ext) P-422 (int)CS-422-8IML-PR Privacy set. P-422-8IML-ERC (ext) P-422-8IML-TPC (int)
TS-422IML Passage set. P-422 (ext) P-422 (int)TS-422IML-PR Privacy set. P-422IML-ERC (ext) P-422IML-TPC (int)TS-422IML-FD Full dummy. P-422D (ext) P-422D (int)TS-422IML-HD Half dummy. P-422D
TS-422-8IML Passage set. P-422 (ext) P-422 (int)TS-422-8IML-PR Privacy set. P-422-8IML-ERC (ext) P-422-8IML-TPC (int)
Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m
PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.
14-148
Revised 02/08/16
Illustrations are for demonstration purposes only. Any knob, lever or ring pull can be combined with any style or size escutcheon plate.
Complete sets with interior mortise lock and spindle. 2 1/4” center-to-center. (Shown)
Trim sets for interior mortise locks with spindle, no lock included. 2 1/4” center-to-center. (Shown)
2 1/2” or 2 3/4” backset standard.Custom backsets available. Call for options and pricing.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.
Complete sets with interior mortise lock and spindle. 2 7/8” center-to-center.
Trim sets for interior mortise locks with spindle, no lock included. 2 7/8” center-to-center.
F422 RIDGE INTERIOR MORTISE LOCK PASSAGE & PRIVACY SETS
CS-F422IML – Complete passage set with interior
mortise lock and spindle. OR TS-F422IML – Trim set only. No lock.
CS-F422IML-PR – Complete privacy set with interior
mortise lock and spindle. OR TS-F422IML-PR – Trim set only. No lock.
TS-F422IML-FD – Trim set only. – Full dummy.
TS-F422IML-HD – Trim set only. – Half dummy.
10"
3" 3"
10"
3" 3"
10"
3" 3"
10"
3"
6 3/
4"
6 3/
4"
6 3/
4"
6 3/
4"
6 3/
4"
2 1/
4"
6 3/
4"
Specify manufacturer & function of interior mortise lock.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.
CS-F422IML Passage set. P-F422 (ext) P-F422 (int)CS-F422IML-PR Privacy set. P-F422IML-ERC (ext) P-F422IML-TPC (int)TS-F422IML-FD Full dummy. P-F422D (ext) P-F422D (int)TS-F422IML-HD Half dummy. P-F422D
CS-F422-8IML Passage set. P-F422 (ext) P-F422 (int)CS-F422-8IML-PR Privacy set. P-F422-8IML-ERC (ext) P-F422-8IML-TPC (int)
TS-F422IML Passage set. P-F422 (ext) P-F422 (int)TS-F422IML-PR Privacy set. P-F422IML-ERC (ext) P-F422IML-TPC (int)TS-F422IML-FD Full dummy. P-F422D (ext) P-F422D (int)TS-F422IML-HD Half dummy. P-F422D
TS-F422-8IML Passage set. P-F422 (ext) P-F422 (int)TS-F422-8IML-PR Privacy set. P-F422-8IML-ERC (ext) P-F422-8IML-TPC (int)
Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m
PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.
14-149
Revised 02/08/16
Illustrations are for demonstration purposes only. Any knob, lever or ring pull can be combined with any style or size escutcheon plate.
Complete sets with interior mortise lock and spindle. 2 1/4” center-to-center. (Shown)
Trim sets for interior mortise locks with spindle, no lock included. 2 1/4” center-to-center. (Shown)
2 1/2” or 2 3/4” backset standard.Custom backsets available. Call for options and pricing.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.
Complete sets with interior mortise lock and spindle. 2 7/8” center-to-center.
Trim sets for interior mortise locks with spindle, no lock included. 2 7/8” center-to-center.
423 RIDGE INTERIOR MORTISE LOCK PASSAGE & PRIVACY SETS
CS-423IML – Complete passage set with interior
mortise lock and spindle. OR TS-423IML – Trim set only. No lock.
CS-423IML-PR – Complete privacy set with interior
mortise lock and spindle. OR TS-423IML-PR – Trim set only. No lock.
TS-423IML-FD – Trim set only. – Full dummy.
TS-423IML-HD – Trim set only. – Half dummy.
12"
2 1/2" 2 1/2"
12"
2 1/2" 2 1/2"
12"
2 1/2" 2 1/2"
12"
2 1/2"
4" 4" 4" 4" 4" 4"
2 1/
4"
4"2
1/4"
Specify manufacturer & function of interior mortise lock.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.
CS-423IML Passage set. P-423 (ext) P-423 (int)CS-423IML-PR Privacy set. P-423IML-ERC (ext) P-423IML-TPC (int)TS-423IML-FD Full dummy. P-423D (ext) P-423D (int)TS-423IML-HD Half dummy. P-423D
CS-423-8IML Passage set. P-423 (ext) P-423 (int)CS-423-8IML-PR Privacy set. P-423-8IML-ERC (ext) P-423-8IML-TPC (int)
TS-423IML Passage set. P-423 (ext) P-423 (int)TS-423IML-PR Privacy set. P-423IML-ERC (ext) P-423IML-TPC (int)TS-423IML-FD Full dummy. P-423D (ext) P-423D (int)TS-423IML-HD Half dummy. P-423D
TS-423-8IML Passage set. P-423 (ext) P-423 (int)TS-423-8IML-PR Privacy set. P-423-8IML-ERC (ext) P-423-8IML-TPC (int)
Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m
PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.
14-150
Revised 02/08/16
Illustrations are for demonstration purposes only. Any knob, lever or ring pull can be combined with any style or size escutcheon plate.
Complete sets with interior mortise lock and spindle. 2 1/4” center-to-center. (Shown)
Trim sets for interior mortise locks with spindle, no lock included. 2 1/4” center-to-center. (Shown)
2 1/2” or 2 3/4” backset standard.Custom backsets available. Call for options and pricing.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.
Complete sets with interior mortise lock and spindle. 2 7/8” center-to-center.
Trim sets for interior mortise locks with spindle, no lock included. 2 7/8” center-to-center.
F423 RIDGE INTERIOR MORTISE LOCK PASSAGE & PRIVACY SETS
CS-F423IML – Complete passage set with interior
mortise lock and spindle. OR TS-F423IML – Trim set only. No lock.
CS-F423IML-PR – Complete privacy set with interior
mortise lock and spindle. OR TS-F423IML-PR – Trim set only. No lock.
TS-F423IML-FD – Trim set only. – Full dummy.
TS-F423IML-HD – Trim set only. – Half dummy.
12"
2 1/2" 2 1/2"
12"
2 1/2" 2 1/2"
12"
2 1/2" 2 1/2"
12"
2 1/2"
8" 8" 8" 8" 8"
2 1/
4"
8"
Specify manufacturer & function of interior mortise lock.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.
CS-F423IML Passage set. P-F423 (ext) P-F423 (int)CS-F423IML-PR Privacy set. P-F423IML-ERC (ext) P-F423IML-TPC (int)TS-F423IML-FD Full dummy. P-F423D (ext) P-F423D (int)TS-F423IML-HD Half dummy. P-F423D
CS-F423-8IML Passage set. P-F423 (ext) P-F423 (int)CS-F423-8IML-PR Privacy set. P-F423-8IML-ERC (ext) P-F423-8IML-TPC (int)
TS-F423IML Passage set. P-F423 (ext) P-F423 (int)TS-F423IML-PR Privacy set. P-F423IML-ERC (ext) P-F423IML-TPC (int)TS-F423IML-FD Full dummy. P-F423D (ext) P-F423D (int)TS-F423IML-HD Half dummy. P-F423D
TS-F423-8IML Passage set. P-F423 (ext) P-F423 (int)TS-F423-8IML-PR Privacy set. P-F423-8IML-ERC (ext) P-F423-8IML-TPC (int)
Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m
PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.
14-151
Revised 02/08/16
Illustrations are for demonstration purposes only. Any knob, lever or ring pull can be combined with any style or size escutcheon plate.
Complete sets with interior mortise lock and spindle. 2 1/4” center-to-center. (Shown)
Trim sets for interior mortise locks with spindle, no lock included. 2 1/4” center-to-center. (Shown)
2 1/2” or 2 3/4” backset standard.Custom backsets available. Call for options and pricing.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.
Complete sets with interior mortise lock and spindle. 2 7/8” center-to-center.
Trim sets for interior mortise locks with spindle, no lock included. 2 7/8” center-to-center.
424 RIDGE INTERIOR MORTISE LOCK PASSAGE & PRIVACY SETS
CS-424IML – Complete passage set with interior
mortise lock and spindle. OR TS-424IML – Trim set only. No lock.
CS-424IML-PR – Complete privacy set with interior
mortise lock and spindle. OR TS-424IML-PR – Trim set only. No lock.
TS-424IML-FD – Trim set only. – Full dummy.
TS-424IML-HD – Trim set only. – Half dummy.
10"
2 1/2" 2 1/2"
10"
2 1/2" 2 1/2"
10"
2 1/2" 2 1/2"
10"
2 1/2"
3 1/
4"
3 1/
4"
3 1/
4"
3 1/
4"
3 1/
4"
3 1/
4"
2 1/
4"
3 1/
4"2
1/4"
Specify manufacturer & function of interior mortise lock.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.
CS-424IML Passage set. P-424 (ext) P-424 (int)CS-424IML-PR Privacy set. P-424IML-ERC (ext) P-424IML-TPC (int)TS-424IML-FD Full dummy. P-424D (ext) P-424D (int)TS-424IML-HD Half dummy. P-424D
CS-424-8IML Passage set. P-424 (ext) P-424 (int)CS-424-8IML-PR Privacy set. P-424-8IML-ERC (ext) P-424-8IML-TPC (int)
TS-424IML Passage set. P-424 (ext) P-424 (int)TS-424IML-PR Privacy set. P-424IML-ERC (ext) P-424IML-TPC (int)TS-424IML-FD Full dummy. P-424D (ext) P-424D (int)TS-424IML-HD Half dummy. P-424D
TS-424-8IML Passage set. P-424 (ext) P-424 (int)TS-424-8IML-PR Privacy set. P-424-8IML-ERC (ext) P-424-8IML-TPC (int)
Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m
PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.
14-152
Revised 02/08/16
Illustrations are for demonstration purposes only. Any knob, lever or ring pull can be combined with any style or size escutcheon plate.
Complete sets with interior mortise lock and spindle. 2 1/4” center-to-center. (Shown)
Trim sets for interior mortise locks with spindle, no lock included. 2 1/4” center-to-center. (Shown)
2 1/2” or 2 3/4” backset standard.Custom backsets available. Call for options and pricing.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.
Complete sets with interior mortise lock and spindle. 2 7/8” center-to-center.
Trim sets for interior mortise locks with spindle, no lock included. 2 7/8” center-to-center.
F424 RIDGE INTERIOR MORTISE LOCK PASSAGE & PRIVACY SETS
CS-F424IML – Complete passage set with interior
mortise lock and spindle. OR TS-F424IML – Trim set only. No lock.
CS-F424IML-PR – Complete privacy set with interior
mortise lock and spindle. OR TS-F424IML-PR – Trim set only. No lock.
TS-F424IML-FD – Trim set only. – Full dummy.
TS-F424IML-HD – Trim set only. – Half dummy.
10"
2 1/2" 2 1/2"
10"
2 1/2" 2 1/2"
10"
2 1/2" 2 1/2"
10"
2 1/2"
6 3/
4"
6 3/
4"
6 3/
4"
6 3/
4"
6 3/
4"
2 1/
4"
6 3/
4"
Specify manufacturer & function of interior mortise lock.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.
CS-F424IML Passage set. P-F424 (ext) P-F424 (int)CS-F424IML-PR Privacy set. P-F424IML-ERC (ext) P-F424IML-TPC (int)TS-F424IML-FD Full dummy. P-F424D (ext) P-F424D (int)TS-F424IML-HD Half dummy. P-F424D
CS-F424-8IML Passage set. P-F424 (ext) P-F424 (int)CS-F424-8IML-PR Privacy set. P-F424-8IML-ERC (ext) P-F424-8IML-TPC (int)
TS-F424IML Passage set. P-F424 (ext) P-F424 (int)TS-F424IML-PR Privacy set. P-F424IML-ERC (ext) P-F424IML-TPC (int)TS-F424IML-FD Full dummy. P-F424D (ext) P-F424D (int)TS-F424IML-HD Half dummy. P-F424D
TS-F424-8IML Passage set. P-F424 (ext) P-F424 (int)TS-F424-8IML-PR Privacy set. P-F424-8IML-ERC (ext) P-F424-8IML-TPC (int)
Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m
PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.
14-153
Revised 02/08/16
Illustrations are for demonstration purposes only. Any knob, lever or ring pull can be combined with any style or size escutcheon plate.
Complete sets with interior mortise lock and spindle. 2 1/4” center-to-center. (Shown)
Trim sets for interior mortise locks with spindle, no lock included. 2 1/4” center-to-center. (Shown)
2 1/2” or 2 3/4” backset standard.Custom backsets available. Call for options and pricing.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.
Complete sets with interior mortise lock and spindle. 2 7/8” center-to-center.
Trim sets for interior mortise locks with spindle, no lock included. 2 7/8” center-to-center.
425 RIDGE INTERIOR MORTISE LOCK PASSAGE & PRIVACY SETS
CS-425IML – Complete passage set with interior
mortise lock and spindle. OR TS-425IML – Trim set only. No lock.
CS-425IML-PR – Complete privacy set with interior
mortise lock and spindle. OR TS-425IML-PR – Trim set only. No lock.
TS-425IML-FD – Trim set only. – Full dummy.
TS-425IML-HD – Trim set only. – Half dummy.
13"
3" 3"
13"
3" 3"
13"
3" 3"
13"
3"
4 1/
2"
4 1/
2"
4 1/
2"
4 1/
2"
4 1/
2"
4 1/
2"
2 1/
4"
4 1/
2"2
1/4"
Specify manufacturer & function of interior mortise lock.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.
CS-425IML Passage set. P-425 (ext) P-425 (int)CS-425IML-PR Privacy set. P-425IML-ERC (ext) P-425IML-TPC (int)TS-425IML-FD Full dummy. P-425D (ext) P-425D (int)TS-425IML-HD Half dummy. P-425D
CS-425-8IML Passage set. P-425 (ext) P-425 (int)CS-425-8IML-PR Privacy set. P-425-8IML-ERC (ext) P-425-8IML-TPC (int)
TS-425IML Passage set. P-425 (ext) P-425 (int)TS-425IML-PR Privacy set. P-425IML-ERC (ext) P-425IML-TPC (int)TS-425IML-FD Full dummy. P-425D (ext) P-425D (int)TS-425IML-HD Half dummy. P-425D
TS-425-8IML Passage set. P-425 (ext) P-425 (int)TS-425-8IML-PR Privacy set. P-425-8IML-ERC (ext) P-425-8IML-TPC (int)
Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m
PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.
14-154
Revised 02/08/16
Illustrations are for demonstration purposes only. Any knob, lever or ring pull can be combined with any style or size escutcheon plate.
Complete sets with interior mortise lock and spindle. 2 1/4” center-to-center. (Shown)
Trim sets for interior mortise locks with spindle, no lock included. 2 1/4” center-to-center. (Shown)
2 1/2” or 2 3/4” backset standard.Custom backsets available. Call for options and pricing.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.
Complete sets with interior mortise lock and spindle. 2 7/8” center-to-center.
Trim sets for interior mortise locks with spindle, no lock included. 2 7/8” center-to-center.
F425 RIDGE INTERIOR MORTISE LOCK PASSAGE & PRIVACY SETS
CS-F425IML – Complete passage set with interior
mortise lock and spindle. OR TS-F425IML – Trim set only. No lock.
CS-F425IML-PR – Complete privacy set with interior
mortise lock and spindle. OR TS-F425IML-PR – Trim set only. No lock.
TS-F425IML-FD – Trim set only. – Full dummy.
TS-F425IML-HD – Trim set only. – Half dummy.
13"
3" 3"
13"
3" 3"
13"
3" 3"
13"
3"
8 1/
2"
8 1/
2"
8 1/
2"
8 1/
2"
8 1/
2"
2 1/
4"
8 1/
2"
Specify manufacturer & function of interior mortise lock.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.
CS-F425IML Passage set. P-F425 (ext) P-F425 (int)CS-F425IML-PR Privacy set. P-F425IML-ERC (ext) P-F425IML-TPC (int)TS-F425IML-FD Full dummy. P-F425D (ext) P-F425D (int)TS-F425IML-HD Half dummy. P-F425D
CS-F425-8IML Passage set. P-F425 (ext) P-F425 (int)CS-F425-8IML-PR Privacy set. P-F425-8IML-ERC (ext) P-F425-8IML-TPC (int)
TS-F425IML Passage set. P-F425 (ext) P-F425 (int)TS-F425IML-PR Privacy set. P-F425IML-ERC (ext) P-F425IML-TPC (int)TS-F425IML-FD Full dummy. P-F425D (ext) P-F425D (int)TS-F425IML-HD Half dummy. P-F425D
TS-F425-8IML Passage set. P-F425 (ext) P-F425 (int)TS-F425-8IML-PR Privacy set. P-F425-8IML-ERC (ext) P-F425-8IML-TPC (int)
Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m
PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.
14-155
Revised 02/08/16
Illustrations are for demonstration purposes only. Any knob, lever or ring pull can be combined with any style or size escutcheon plate.
426 RIDGE INTERIOR MORTISE LOCK PASSAGE & PRIVACY SETS
Complete sets with interior mortise lock and spindle. 2 1/4” center-to-center. (Shown)
Trim sets for interior mortise locks with spindle, no lock included. 2 1/4” center-to-center. (Shown)
2 1/2” or 2 3/4” backset standard.Custom backsets available. Call for options and pricing.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.
Complete sets with interior mortise lock and spindle. 2 7/8” center-to-center.
Trim sets for interior mortise locks with spindle, no lock included. 2 7/8” center-to-center.
Specify manufacturer & function of interior mortise lock.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.
CS-426IML – Complete passage set with interior
mortise lock and spindle. OR TS-426IML – Trim set only. No lock.
CS-426IML-PR – Complete privacy set with interior
mortise lock and spindle. OR TS-426IML-PR – Trim set only. No lock.
TS-426IML-FD – Trim set only. – Full dummy.
TS-426IML-HD – Trim set only. – Half dummy.
10"
2 3/4" 2 3/4"
10"
2 3/4" 2 3/4"
10"
2 3/4" 2 3/4"
10"
2 3/4"
3" 3" 3" 3" 3" 3"
2 1/
4"
3"2
1/4"
CS-426IML Passage set. P-426 (ext) P-426 (int)CS-426IML-PR Privacy set. P-426IML-ERC (ext) P-426IML-TPC (int)TS-426IML-FD Full dummy. P-426D (ext) P-426D (int)TS-426IML-HD Half dummy. P-426D
CS-426-8IML Passage set. P-426 (ext) P-426 (int)CS-426-8IML-PR Privacy set. P-426-8IML-ERC (ext) P-426-8IML-TPC (int)
TS-426IML Passage set. P-426 (ext) P-426 (int)TS-426IML-PR Privacy set. P-426IML-ERC (ext) P-426IML-TPC (int)TS-426IML-FD Full dummy. P-426D (ext) P-426D (int)TS-426IML-HD Half dummy. P-426D
TS-426-8IML Passage set. P-426 (ext) P-426 (int)TS-426-8IML-PR Privacy set. P-426-8IML-ERC (ext) P-426-8IML-TPC (int)
Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m
PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.
14-156
Revised 02/08/16
Illustrations are for demonstration purposes only. Any knob, lever or ring pull can be combined with any style or size escutcheon plate.
F426 RIDGE INTERIOR MORTISE LOCK PASSAGE & PRIVACY SETS
Complete sets with interior mortise lock and spindle. 2 1/4” center-to-center. (Shown)
Trim sets for interior mortise locks with spindle, no lock included. 2 1/4” center-to-center. (Shown)
2 1/2” or 2 3/4” backset standard.Custom backsets available. Call for options and pricing.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.
Complete sets with interior mortise lock and spindle. 2 7/8” center-to-center.
Trim sets for interior mortise locks with spindle, no lock included. 2 7/8” center-to-center.
Specify manufacturer & function of interior mortise lock.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.
CS-F426IML – Complete passage set with interior
mortise lock and spindle. OR TS-F426IML – Trim set only. No lock.
CS-F426IML-PR – Complete privacy set with interior
mortise lock and spindle. OR TS-F426IML-PR – Trim set only. No lock.
TS-F426IML-FD – Trim set only. – Full dummy.
TS-F426IML-HD – Trim set only. – Half dummy.
10"
2 3/4" 2 3/4"
10"
2 3/4" 2 3/4"
10"
2 3/4" 2 3/4"
10"
2 3/4"
7" 7" 7" 7" 7" 7"7"
CS-F426IML Passage set. P-F426 (ext) P-F426 (int)CS-F426IML-PR Privacy set. P-F426IML-ERC (ext) P-F426IML-TPC (int)TS-F426IML-FD Full dummy. P-F426D (ext) P-F426D (int)TS-F426IML-HD Half dummy. P-F426D
CS-F426-8IML Passage set. P-F426 (ext) P-F426 (int)CS-F426-8IML-PR Privacy set. P-F426-8IML-ERC (ext) P-F426-8IML-TPC (int)
TS-F426IML Passage set. P-F426 (ext) P-F426 (int)TS-F426IML-PR Privacy set. P-F426IML-ERC (ext) P-F426IML-TPC (int)TS-F426IML-FD Full dummy. P-F426D (ext) P-F426D (int)TS-F426IML-HD Half dummy. P-F426D
TS-F426-8IML Passage set. P-F426 (ext) P-F426 (int)TS-F426-8IML-PR Privacy set. P-F426-8IML-ERC (ext) P-F426-8IML-TPC (int)
Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m
PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.
14-157
Revised 02/08/16
Illustrations are for demonstration purposes only. Any knob, lever or ring pull can be combined with any style or size escutcheon plate.
Complete sets with interior mortise lock and spindle. 2 1/4” center-to-center. (Shown)
Trim sets for interior mortise locks with spindle, no lock included. 2 1/4” center-to-center. (Shown)
Complete sets with interior mortise lock and spindle. 2 7/8” center-to-center.
Trim sets for interior mortise locks with spindle, no lock included. 2 7/8” center-to-center.
2 1/2” or 2 3/4” backset standard.Custom backsets available. Call for options and pricing.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.
336 CORRUGATED w/BAND INTERIOR MORTISE LOCK PASSAGE & PRIVACY SETS
CS-336IML – Complete passage set with interior
mortise lock and spindle. OR TS-336IML – Trim set only. No lock.
CS-336IML-PR – Complete privacy set with interior
mortise lock and spindle. OR TS-336IML-PR – Trim set only. No lock.
TS-336IML-FD – Trim set only. – Full dummy.
TS-336IML-HD – Trim set only. – Half dummy.
7"
3 1/2" 3 1/2"
7"
3 1/2" 3 1/2"
7"
3 1/2" 3 1/2"
7"
3 1/2"
2 1/
4"
2 1/
4"
2 1/
4"
2 1/
4"
2 1/
4"
2 1/
4"
2 1/
4"
2 1/
4"2
1/4"
Specify manufacturer & function of interior mortise lock.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.
CS-336IML Passage set. P-336OH (ext) P-336OH (int)CS-336IML-PR Privacy set. P-336OH-IML-ERC (ext) P-336OH-IML-TPC (int)TS-336IML-FD Full dummy. P-336OH-D (ext) P-336OH-D (int)TS-336IML-HD Half dummy. P-336OH-D
CS-336-8IML Passage set. P-336OH (ext) P-336OH (int)CS-336-8IML-PR Privacy set. P-336OH-8IML-ERC (ext) P-336OH-8IML-TPC (int)
TS-336IML Passage set. P-336OH (ext) P-336OH (int)TS-336IML-PR Privacy set. P-336OH-IML-ERC (ext) P-336OH-IML-TPC (int)TS-336IML-FD Full dummy. P-336OH-D (ext) P-336OH-D (int)TS-336IML-HD Half dummy. P-336OH-D
TS-336-8IML Passage set. P-336OH (ext) P-336OH (int)TS-336-8IML-PR Privacy set. P-336OH-8IML-ERC (ext) P-336OH-8IML-TPC (int)
Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m
PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.
14-158
Revised 02/08/16
Illustrations are for demonstration purposes only. Any knob, lever or ring pull can be combined with any style or size escutcheon plate.
Complete sets with interior mortise lock and spindle. 2 1/4” center-to-center. (Shown)
Trim sets for interior mortise locks with spindle, no lock included. 2 1/4” center-to-center. (Shown)
Complete sets with interior mortise lock and spindle. 2 7/8” center-to-center.
Trim sets for interior mortise locks with spindle, no lock included. 2 7/8” center-to-center.
2 1/2” or 2 3/4” backset standard.Custom backsets available. Call for options and pricing.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.
F336 CORRUGATED w/BAND INTERIOR MORTISE LOCK PASSAGE & PRIVACY SETS
CS-F336IML – Complete passage set with interior
mortise lock and spindle. OR TS-F336IML – Trim set only. No lock.
CS-F336IML-PR – Complete privacy set with interior
mortise lock and spindle. OR TS-F336IML-PR – Trim set only. No lock.
TS-F336IML-FD – Trim set only. – Full dummy.
TS-F336IML-HD – Trim set only. – Half dummy.
7"
3 1/2" 3 1/2"
7"
3 1/2" 3 1/2"
7"
3 1/2" 3 1/2"
7"
3 1/2"
4 3/
4"
4 3/
4"
4 3/
4"
4 3/
4"
4 3/
4"2 1/
4"
4 3/
4"
Specify manufacturer & function of interior mortise lock.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.
CS-F336IML Passage set. P-F336OH (ext) P-F336OH (int)CS-F336IML-PR Privacy set. P-F336OH-IML-ERC (ext) P-F336OH-IML-TPC (int)TS-F336IML-FD Full dummy. P-F336OH-D (ext) P-F336OH-D (int)TS-F336IML-HD Half dummy. P-F336OH-D
CS-F336-8IML Passage set. P-F336OH (ext) P-F336OH (int)CS-F336-8IML-PR Privacy set. P-F336OH-8IML-ERC (ext) P-F336OH-8IML-TPC (int)
TS-F336IML Passage set. P-F336OH (ext) P-F336OH (int)TS-F336IML-PR Privacy set. P-F336OH-IML-ERC (ext) P-F336OH-IML-TPC (int)TS-F336IML-FD Full dummy. P-F336OH-D (ext) P-F336OH-D (int)TS-F336IML-HD Half dummy. P-F336OH-D
TS-F336-8IML Passage set. P-F336OH (ext) P-F336OH (int)TS-F336-8IML-PR Privacy set. P-F336OH-8IML-ERC (ext) P-F336OH-8IML-TPC (int)
Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m
PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.
14-159
Revised 02/08/16
Illustrations are for demonstration purposes only. Any knob, lever or ring pull can be combined with any style or size escutcheon plate.
Complete sets with interior mortise lock and spindle. 2 1/4” center-to-center. (Shown)
Trim sets for interior mortise locks with spindle, no lock included. 2 1/4” center-to-center. (Shown)
Complete sets with interior mortise lock and spindle. 2 7/8” center-to-center.
Trim sets for interior mortise locks with spindle, no lock included. 2 7/8” center-to-center.
2 1/2” or 2 3/4” backset standard.Custom backsets available. Call for options and pricing.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.
431 CORRUGATED w/BAND INTERIOR MORTISE LOCK PASSAGE & PRIVACY SETS
10"
3 1/2" 3 1/2"
CS-431IML – Complete passage set with interior
mortise lock and spindle. OR TS-431IML – Trim set only. No lock.
CS-431IML-PR – Complete privacy set with interior
mortise lock and spindle. OR TS-431IML-PR – Trim set only. No lock.
TS-431IML-FD – Trim set only. – Full dummy.
TS-431IML-HD – Trim set only. – Half dummy.
10"
3 1/2" 3 1/2"
10"
3 1/2" 3 1/2"
10"
3 1/2"
3 1/
4"
3 1/
4"
3 1/
4"
3 1/
4"
3 1/
4"
3 1/
4"
2 1/
4"
3 1/
4"2
1/4"
Specify manufacturer & function of interior mortise lock.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.
CS-431IML Passage set. P-431 (ext) P-431 (int)CS-431IML-PR Privacy set. P-431IML-ERC (ext) P-431IML-TPC (int)TS-431IML-FD Full dummy. P-431D (ext) P-431D (int)TS-431IML-HD Half dummy. P-431D
CS-431-8IML Passage set. P-431 (ext) P-431 (int)CS-431-8IML-PR Privacy set. P-431-8IML-ERC (ext) P-431-8IML-TPC (int)
TS-431IML Passage set. P-431 (ext) P-431 (int)TS-431IML-PR Privacy set. P-431IML-ERC (ext) P-431IML-TPC (int)TS-431IML-FD Full dummy. P-431D (ext) P-431D (int)TS-431IML-HD Half dummy. P-431D
TS-431-8IML Passage set. P-431 (ext) P-431 (int)TS-431-8IML-PR Privacy set. P-431-8IML-ERC (ext) P-431-8IML-TPC (int)
Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m
PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.
14-160
Revised 02/08/16
Illustrations are for demonstration purposes only. Any knob, lever or ring pull can be combined with any style or size escutcheon plate.
Complete sets with interior mortise lock and spindle. 2 1/4” center-to-center. (Shown)
Trim sets for interior mortise locks with spindle, no lock included. 2 1/4” center-to-center. (Shown)
Complete sets with interior mortise lock and spindle. 2 7/8” center-to-center.
Trim sets for interior mortise locks with spindle, no lock included. 2 7/8” center-to-center.
2 1/2” or 2 3/4” backset standard.Custom backsets available. Call for options and pricing.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.
F431 CORRUGATED w/BAND INTERIOR MORTISE LOCK PASSAGE & PRIVACY SETS
10"
3 1/2" 3 1/2"
CS-F431IML – Complete passage set with interior
mortise lock and spindle. OR TS-F431IML – Trim set only. No lock.
CS-F431IML-PR – Complete privacy set with interior
mortise lock and spindle. OR TS-F431IML-PR – Trim set only. No lock.
TS-F431IML-FD – Trim set only. – Full dummy.
TS-F431IML-HD – Trim set only. – Half dummy.
10"
3 1/2" 3 1/2"
10"
3 1/2" 3 1/2"
10"
3 1/2"
6 3/
4"
6 3/
4"
6 3/
4"
6 3/
4"
6 3/
4"
6 3/
4"
2 1/
4"
Specify manufacturer & function of interior mortise lock.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.
CS-F431IML Passage set. P-F431 (ext) P-F431 (int)CS-F431IML-PR Privacy set. P-F431IML-ERC (ext) P-F431IML-TPC (int)TS-F431IML-FD Full dummy. P-F431D (ext) P-F431D (int)TS-F431IML-HD Half dummy. P-F431D
CS-F431-8IML Passage set. P-F431 (ext) P-F431 (int)CS-F431-8IML-PR Privacy set. P-F431-8IML-ERC (ext) P-F431-8IML-TPC (int)
TS-F431IML Passage set. P-F431 (ext) P-F431 (int)TS-F431IML-PR Privacy set. P-F431IML-ERC (ext) P-F431IML-TPC (int)TS-F431IML-FD Full dummy. P-F431D (ext) P-F431D (int)TS-F431IML-HD Half dummy. P-F431D
TS-F431-8IML Passage set. P-F431 (ext) P-F431 (int)TS-F431-8IML-PR Privacy set. P-F431-8IML-ERC (ext) P-F431-8IML-TPC (int)
Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m
PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.
14-161
Revised 02/08/16
Illustrations are for demonstration purposes only. Any knob, lever or ring pull can be combined with any style or size escutcheon plate.
Complete sets with interior mortise lock and spindle. 2 1/4” center-to-center.
Trim sets for interior mortise locks with spindle, no lock included. 2 1/4” center-to-center.
2 1/2” or 2 3/4” backset standard.Custom backsets available. Call for options and pricing.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.
346 HAMPTON INTERIOR MORTISE LOCK PASSAGE & PRIVACY SETS
7"
3 3/8" 3 3/8"
CS-346IML – Complete passage set with interior
mortise lock and spindle. OR TS-346IML – Trim set only. No lock.
CS-346IML-PR – Complete privacy set with interior
mortise lock and spindle. OR TS-346IML-PR – Trim set only. No lock.
TS-346IML-FD – Trim set only. – Full dummy.
TS-346IML-HD – Trim set only. – Half dummy.
7"
3 3/8" 3 3/8"
7"
3 3/8" 3 3/8"
7"
3 3/8"
2 3/
8"
2 3/
8"
2 3/
8"
2 3/
8"
2 3/
8"
2 3/
8"
2 1/
4"
2 3/
8"2
1/4"
Specify manufacturer & function of interior mortise lock.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.
CS-346IML Passage set. P-346OH (ext) P-346OH (int)
CS-346IML-PR Privacy set. P-346OH-IML-ERC (ext) P-346OH-IML-TPC (int)
TS-346IML-FD Full dummy. P-346OH-D (ext) P-346OH-D (int)
TS-346IML-HD Half dummy. P-346OH-D
TS-346IML Passage set. P-346OH (ext) P-346OH (int)
TS-346IML-PR Privacy set. P-346OH-IML-ERC (ext) P-346OHIML-TPC (int)
TS-346IML-FD Full dummy. P-346OH-D (ext) P-346OH-D (int)
TS-346IML-HD Half dummy. P-346OH-D
Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m
PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.
14-162
Revised 02/08/16
Illustrations are for demonstration purposes only. Any knob, lever or ring pull can be combined with any style or size escutcheon plate.
Complete sets with interior mortise lock and spindle. 2 1/4” center-to-center.
Trim sets for interior mortise locks with spindle, no lock included. 2 1/4” center-to-center.
2 1/2” or 2 3/4” backset standard.Custom backsets available. Call for options and pricing.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.
F346 HAMPTON INTERIOR MORTISE LOCK PASSAGE & PRIVACY SETS
7"
3 3/8" 3 3/8"
CS-F346IML – Complete passage set with interior
mortise lock and spindle. OR TS-F346IML – Trim set only. No lock.
CS-F346IML-PR – Complete privacy set with interior
mortise lock and spindle. OR TS-F346IML-PR – Trim set only. No lock.
TS-F346IML-FD – Trim set only. – Full dummy.
TS-F346IML-HD – Trim set only. – Half dummy.
7"
3 3/8" 3 3/8"
7"
3 3/8" 3 3/8"
7"
3 3/8"
4 5/
8"
4 5/
8"
4 5/
8"
4 5/
8"
4 5/
8"
4 5/
8" 2 1/
4"
Specify manufacturer & function of interior mortise lock.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.
CS-F346IML Passage set. P-F346OH (ext) P-F346OH (int)
CS-F346IML-PR Privacy set. P-F346OH-IML-ERC (ext) P-F346OH-IML-TPC (int)
TS-F346IML-FD Full dummy. P-F346OH-D (ext) P-F346OH-D (int)
TS-F346IML-HD Half dummy. P-F346OH-D
TS-F346IML Passage set. P-F346OH (ext) P-F346OH (int)
TS-F346IML-PR Privacy set. P-F346OH-IML-ERC (ext) P-F346OH-IML-TPC (int)
TS-F346IML-FD Full dummy. P-F346OH-D (ext) P-F346OH-D (int)
TS-F346IML-HD Half dummy. P-F346OH-D
Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m
PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.
14-163
Revised 02/08/16
Illustrations are for demonstration purposes only. Any knob, lever or ring pull can be combined with any style or size escutcheon plate.
Complete sets with interior mortise lock and spindle. 2 1/4” center-to-center. (Shown)
Trim sets for interior mortise locks with spindle, no lock included. 2 1/4” center-to-center. (Shown)
2 1/2” or 2 3/4” backset standard.Custom backsets available. Call for options and pricing.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.
Complete sets with interior mortise lock and spindle. 2 7/8” center-to-center.
Trim sets for interior mortise locks with spindle, no lock included. 2 7/8” center-to-center.
440 HAMPTON INTERIOR MORTISE LOCK PASSAGE & PRIVACY SETS
CS-440IML – Complete passage set with interior
mortise lock and spindle. OR TS-440IML – Trim set only. No lock.
CS-440IML-PR – Complete privacy set with interior
mortise lock and spindle. OR TS-440IML-PR – Trim set only. No lock.
TS-440IML-FD – Trim set only. – Full dummy.
TS-440IML-HD – Trim set only. – Half dummy.
10"
2 1/2" 2 1/2"
10"
2 1/2" 2 1/2"
10"
2 1/2" 2 1/2"
10"
2 1/2"
3 1/
4"
3 1/
4"
3 1/
4"
3 1/
4"
3 1/
4"
3 1/
4"
2 1/
4"
3 1/
4"2
1/4"
Specify manufacturer & function of interior mortise lock.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.
CS-440IML Passage set. P-440(ext) P-440(int)CS-440IML-PR Privacy set. P-440IML-ERC (ext) P-440IML-TPC (int)TS-440IML-FD Full dummy. P-440D (ext) P-440D (int)TS-440IML-HD Half dummy. P-440D
CS-440-8IML Passage set. P-440 (ext) P-440 (int)CS-440-8IML-PR Privacy set. P-440-8IML-ERC (ext) P-440-8IML-TPC (int)
TS-440IML Passage set. P-440 (ext) P-440 (int)TS-440IML-PR Privacy set. P-440IML-ERC (ext) P-440IML-TPC (int)TS-440IML-FD Full dummy. P-440D (ext) P-440D (int)TS-440IML-HD Half dummy. P-440D
TS-440-8IML Passage set. P-440 (ext) P-440 (int)TS-440-8IML-PR Privacy set. P-440-8IML-ERC (ext) P-440-8IML-TPC (int)
Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m
PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.
14-164
Revised 02/08/16
Illustrations are for demonstration purposes only. Any knob, lever or ring pull can be combined with any style or size escutcheon plate.
Complete sets with interior mortise lock and spindle. 2 1/4” center-to-center. (Shown)
Trim sets for interior mortise locks with spindle, no lock included. 2 1/4” center-to-center. (Shown)
2 1/2” or 2 3/4” backset standard.Custom backsets available. Call for options and pricing.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.
Complete sets with interior mortise lock and spindle. 2 7/8” center-to-center.
Trim sets for interior mortise locks with spindle, no lock included. 2 7/8” center-to-center.
F440 HAMPTON INTERIOR MORTISE LOCK PASSAGE & PRIVACY SETS
CS-F440IML – Complete passage set with interior
mortise lock and spindle. OR TS-F440IML – Trim set only. No lock.
CS-F440IML-PR – Complete privacy set with interior
mortise lock and spindle. OR TS-F440IML-PR – Trim set only. No lock.
TS-F440IML-FD – Trim set only. – Full dummy.
TS-F440IML-HD – Trim set only. – Half dummy.
10"
2 1/2" 2 1/2"
10"
2 1/2" 2 1/2"
10"
2 1/2" 2 1/2"
10"
2 1/2"
6 3/
4"
6 3/
4"
6 3/
4"
6 3/
4"
6 3/
4"
2 1/
4"
6 3/
4"
Specify manufacturer & function of interior mortise lock.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.
CS-F440IML Passage set. P-F440 (ext) P-F440 (int)CS-F440IML-PR Privacy set. P-F440IML-ERC (ext) P-F440IML-TPC (int)TS-F440IML-FD Full dummy. P-F440D (ext) P-F440D (int)TS-F440IML-HD Half dummy. P-F440D
CS-F440-8IML Passage set. P-F440 (ext) P-F440 (int)CS-F440-8IML-PR Privacy set. P-F440-8IML-ERC (ext) P-F440-8IML-TPC (int)
TS-F440IML Passage set. P-F440 (ext) P-F440 (int)TS-F440IML-PR Privacy set. P-F440IML-ERC (ext) P-F440IML-TPC (int)TS-F440IML-FD Full dummy. P-F440D (ext) P-F440D (int)TS-F440IML-HD Half dummy. P-F440D
TS-F440-8IML Passage set. P-F440 (ext) P-F440 (int)TS-F440-8IML-PR Privacy set. P-F440-8IML-ERC (ext) P-F440-8IML-TPC (int)
Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m
PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.
14-165
Revised 02/08/16
Illustrations are for demonstration purposes only. Any knob, lever or ring pull can be combined with any style or size escutcheon plate.
Complete sets with interior mortise lock and spindle. 2 1/4” center-to-center. (Shown)
Trim sets for interior mortise locks with spindle, no lock included. 2 1/4” center-to-center. (Shown)
Complete sets with interior mortise lock and spindle. 2 7/8” center-to-center.
Trim sets for interior mortise locks with spindle, no lock included. 2 7/8” center-to-center.
2 1/2” or 2 3/4” backset standard.Custom backsets available. Call for options and pricing.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.
441 HAMPTON INTERIOR MORTISE LOCK PASSAGE & PRIVACY SETS
CS-441IML – Complete passage set with interior
mortise lock and spindle. OR TS-441IML – Trim set only. No lock.
CS-441IML-PR – Complete privacy set with interior
mortise lock and spindle. OR TS-441IML-PR – Trim set only. No lock.
TS-441IML-FD – Trim set only. – Full dummy.
TS-441IML-HD – Trim set only. – Half dummy.
11 1
/2"
3 3/8" 3 3/8"
11 1
/2"
3 3/8" 3 3/8"
11 1
/2"
3 3/8" 3 3/8"
11 1
/2"
3 3/8"
4" 4" 4" 4" 4" 4"
2 1/
4"
4"2
1/4"
Specify manufacturer & function of interior mortise lock.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.
CS-441IML Passage set. P-441 (ext) P-441 (int)CS-441IML-PR Privacy set. P-441IML-ERC (ext) P-441IML-TPC (int)TS-441IML-FD Full dummy. P-441D (ext) P-441D (int)TS-441IML-HD Half dummy. P-441D
CS-441-8IML Passage set. P-441 (ext) P-441 (int)CS-441-8IML-PR Privacy set. P-441-8IML-ERC (ext) P-441-8IML-TPC (int)
TS-441IML Passage set. P-441 (ext) P-441 (int)TS-441IML-PR Privacy set. P-441IML-ERC (ext) P-441IML-TPC (int)TS-441IML-FD Full dummy. P-441D (ext) P-441D (int)TS-441IML-HD Half dummy. P-441D
TS-441-8IML Passage set. P-441 (ext) P-441 (int)TS-441-8IML-PR Privacy set. P-441-8IML-ERC (ext) P-441-8IML-TPC (int)
Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m
PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.
14-166
Revised 02/08/16
Illustrations are for demonstration purposes only. Any knob, lever or ring pull can be combined with any style or size escutcheon plate.
Trim sets for interior mortise locks with spindle, no lock included. 2 1/4” center-to-center. (Shown)
Complete sets with interior mortise lock and spindle. 2 7/8” center-to-center.
Trim sets for interior mortise locks with spindle, no lock included. 2 7/8” center-to-center.
2 1/2” or 2 3/4” backset standard.Custom backsets available. Call for options and pricing.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.
Complete sets with interior mortise lock and spindle. 2 1/4” center-to-center. (Shown)
F441 HAMPTON INTERIOR MORTISE LOCK PASSAGE & PRIVACY SETS
CS-F441IML – Complete passage set with interior
mortise lock and spindle. OR TS-F441IML – Trim set only. No lock.
CS-F441IML-PR – Complete privacy set with interior
mortise lock and spindle. OR TS-F441IML-PR – Trim set only. No lock.
TS-F441IML-FD – Trim set only. – Full dummy.
TS-F441IML-HD – Trim set only. – Half dummy.
11 1
/2"
3 3/8" 3 3/8"
11 1
/2"
3 3/8" 3 3/8"
11 1
/2"
3 3/8" 3 3/8"
11 1
/2"
3 3/8"
7 1/
2"
7 1/
2"
7 1/
2"
7 1/
2"
7 1/
2"
7 1/
2"
2 1/
4"
Specify manufacturer & function of interior mortise lock.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.
CS-F441IML Passage set. P-F441 (ext) P-F441 (int)CS-F441IML-PR Privacy set. P-F441IML-ERC (ext) P-F441IML-TPC (int)TS-F441IML-FD Full dummy. P-F441D (ext) P-F441D (int)TS-F441IML-HD Half dummy. P-F441D
CS-F441-8IML Passage set. P-F441 (ext) P-F441 (int)CS-F441-8IML-PR Privacy set. P-F441-8IML-ERC (ext) P-F441-8IML-TPC (int)
TS-F441IML Passage set. P-F441 (ext) P-F441 (int)TS-F441IML-PR Privacy set. P-F441IML-ERC (ext) P-F441IML-TPC (int)TS-F441IML-FD Full dummy. P-F441D (ext) P-F441D (int)TS-F441IML-HD Half dummy. P-F441D
TS-F441-8IML Passage set. P-F441 (ext) P-F441 (int)TS-F441-8IML-PR Privacy set. P-F441-8IML-ERC (ext) P-F441-8IML-TPC (int)
Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m
PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.
14-167
Revised 02/08/16
Illustrations are for demonstration purposes only. Any knob, lever or ring pull can be combined with any style or size escutcheon plate.
Complete sets with interior mortise lock and spindle. 2 1/4” center-to-center.
Trim sets for interior mortise locks with spindle, no lock included. 2 1/4” center-to-center.
2 1/2” or 2 3/4” backset standard.Custom backsets available. Call for options and pricing.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.
355 TRELLIS INTERIOR MORTISE LOCK PASSAGE & PRIVACY SETS
CS-355IML – Complete passage set with interior
mortise lock and spindle. OR TS-355IML – Trim set only. No lock.
CS-355IML-PR – Complete privacy set with interior
mortise lock and spindle. OR TS-355IML-PR – Trim set only. No lock.
TS-355IML-FD – Trim set only. – Full dummy.
TS-355IML-HD – Trim set only. – Half dummy.
6 1/
2"
2 3/4" 2 3/4"
6 1/
2"
2 3/4" 2 3/4"
6 1/
2"
2 3/4" 2 3/4"
6 1/
2"
2 3/4"
2 3/
16"
2 3/
16"
2 3/
16"
2 3/
16"
2 3/
16"
2 3/
16"2
1/4"
2 3/
16"2
1/4
"
1/4"
1/4"
1/4"
1/4"
Specify manufacturer & function of interior mortise lock.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.
CS-355IML Passage set. P-355OH (ext) P-355OH (int)
CS-355IML-PR Privacy set. P-355OH-IML-ERC (ext) P-355OH-IML-TPC (int)
TS-355IML-FD Full dummy. P-355OH-D (ext) P-355OH-D (int)
TS-355IML-HD Half dummy. P-355OH-D
TS-355IML Passage set. P-355OH (ext) P-355OH (int)
TS-355IML-PR Privacy set. P-355OH-IML-ERC (ext) P-355OH-IML-TPC (int)
TS-355IML-FD Full dummy. P-355OH-D (ext) P-355OH-D (int)
TS-355IML-HD Half dummy. P-355OH-D
Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m
PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.
14-168
Revised 02/08/16
Illustrations are for demonstration purposes only. Any knob, lever or ring pull can be combined with any style or size escutcheon plate.
Complete sets with interior mortise lock and spindle. 2 1/4” center-to-center.
Trim sets for interior mortise locks with spindle, no lock included. 2 1/4” center-to-center.
2 1/2” or 2 3/4” backset standard.Custom backsets available. Call for options and pricing.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.
F355 TRELLIS INTERIOR MORTISE LOCK PASSAGE & PRIVACY SETS
CS-F355IML – Complete passage set with interior
mortise lock and spindle. OR TS-F355IML – Trim set only. No lock.
CS-F355IML-PR – Complete privacy set with interior
mortise lock and spindle. OR TS-F355IML-PR – Trim set only. No lock.
TS-F355IML-FD – Trim set only. – Full dummy.
TS-F355IML-HD – Trim set only. – Half dummy.
6 1/
2"
2 3/4" 2 3/4"
6 1/
2"
2 3/4" 2 3/4"
6 1/
2"
2 3/4" 2 3/4"
6 1/
2"
2 3/4"
4 5/
16"
4 5/
16"
4 5/
16"
4 5/
16"
4 5/
16"
2 1/
4"
4 5/
16"
1/4"
1/4"
1/4"
1/4"
Specify manufacturer & function of interior mortise lock.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.
CS-F355IML Passage set. P-F355OH (ext) P-F355OH (int)
CS-F355IML-PR Privacy set. P-F355OH-IML-ERC (ext) P-F355OH-IML-TPC (int)
TS-F355IML-FD Full dummy. P-F355OH-D (ext) P-F355OH-D (int)
TS-F355IML-HD Half dummy. P-F355OH-D
TS-F355IML Passage set. P-F355OH (ext) P-F355OH (int)
TS-F355IML-PR Privacy set. P-F355OH-IML-ERC (ext) P-F355OH-IML-TPC (int)
TS-F355IML-FD Full dummy. P-F355OH-D (ext) P-F355OH-D (int)
TS-F355IML-HD Half dummy. P-F355OH-D
Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m
PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.
14-169
Revised 02/08/16
Illustrations are for demonstration purposes only. Any knob, lever or ring pull can be combined with any style or size escutcheon plate.
Complete sets with interior mortise lock and spindle. 2 1/4” center-to-center.
Trim sets for interior mortise locks with spindle, no lock included. 2 1/4” center-to-center.
2 1/2” or 2 3/4” backset standard.Custom backsets available. Call for options and pricing.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.
356 TRELLIS INTERIOR MORTISE LOCK PASSAGE & PRIVACY SETS
CS-356IML – Complete passage set with interior
mortise lock and spindle. OR TS-356IML – Trim set only. No lock.
CS-356IML-PR – Complete privacy set with interior
mortise lock and spindle. OR TS-356IML-PR – Trim set only. No lock.
TS-356IML-FD – Trim set only. – Full dummy.
TS-356IML-HD – Trim set only. – Half dummy.
6 5/
8"
3 1/2" 3 1/2"
6 5/
8"
3 1/2" 3 1/2"
6 5/
8"
3 1/2" 3 1/2"
6 5/
8"
3 1/2"
2 1/
4"
2 1/
4"
2 1/
4"
2 1/
4"
2 1/
4"
2 1/
4"
2 1/
4"
2 1/
4"2
1/4"
1/4"
1/4"
1/4"
1/4"
Specify manufacturer & function of interior mortise lock.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.
CS-356IML Passage set. P-356OH (ext) P-356OH (int)
CS-356IML-PR Privacy set. P-356OH-IML-ERC (ext) P-356OH-IML-TPC (int)
TS-356IML-FD Full dummy. P-356OH-D (ext) P-356OH-D (int)
TS-356IML-HD Half dummy. P-356OH-D
TS-356IML Passage set. P-356OH (ext) P-356OH (int)
TS-356IML-PR Privacy set. P-356OH-IML-ERC (ext) P-356OH-IML-TPC (int)
TS-356IML-FD Full dummy. P-356OH-D (ext) P-356OH-D (int)
TS-356IML-HD Half dummy. P-356OH-D
Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m
PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.
14-170
Revised 02/08/16
Illustrations are for demonstration purposes only. Any knob, lever or ring pull can be combined with any style or size escutcheon plate.
Complete sets with interior mortise lock and spindle. 2 1/4” center-to-center.
Trim sets for interior mortise locks with spindle, no lock included. 2 1/4” center-to-center.
2 1/2” or 2 3/4” backset standard.Custom backsets available. Call for options and pricing.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.
F356 TRELLIS INTERIOR MORTISE LOCK PASSAGE & PRIVACY SETS
CS-F356IML – Complete passage set with interior
mortise lock and spindle. OR TS-F356IML – Trim set only. No lock.
CS-F356IML-PR – Complete privacy set with interior
mortise lock and spindle. OR TS-F356IML-PR – Trim set only. No lock.
TS-F356IML-FD – Trim set only. – Full dummy.
TS-F356IML-HD – Trim set only. – Half dummy.
6 5/
8"
3 1/2" 3 1/2"
6 5/
8"
3 1/2" 3 1/2"
6 5/
8"
3 1/2" 3 1/2"
6 5/
8"
3 1/2"
4 3/
8"
4 3/
8"
4 3/
8"
4 3/
8"
4 3/
8"2 1/
4"
4 3/
8"
1/4"
1/4"
1/4"
1/4"
Specify manufacturer & function of interior mortise lock.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.
CS-F356IML Passage set. P-F356OH (ext) P-F356OH (int)
CS-F356IML-PR Privacy set. P-F356OH-IML-ERC (ext) P-F356OH-IML-TPC (int)
TS-F356IML-FD Full dummy. P-F356OH-D (ext) P-F356OH-D (int)
TS-F356IML-HD Half dummy. P-F356OH-D
TS-F356IML Passage set. P-F356OH (ext) P-F356OH (int)
TS-F356IML-PR Privacy set. P-F356OH-IML-ERC (ext) P-F356OH-IML-TPC (int)
TS-F356IML-FD Full dummy. P-F356OH-D (ext) P-F356OH-D (int)
TS-F356IML-HD Half dummy. P-F356OH-D
Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m
PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.
14-171
Revised 02/08/16
Illustrations are for demonstration purposes only. Any knob, lever or ring pull can be combined with any style or size escutcheon plate.
Complete sets with interior mortise lock and spindle. 2 1/4” center-to-center. (Shown)
Trim sets for interior mortise locks with spindle, no lock included. 2 1/4” center-to-center. (Shown)
Complete sets with interior mortise lock and spindle. 2 7/8” center-to-center.
Trim sets for interior mortise locks with spindle, no lock included. 2 7/8” center-to-center.
2 1/2” or 2 3/4” backset standard.Custom backsets available. Call for options and pricing.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.
451 TRELLIS INTERIOR MORTISE LOCK PASSAGE & PRIVACY SETS
CS-451IML – Complete passage set with interior
mortise lock and spindle. OR TS-451IML – Trim set only. No lock.
CS-451IML-PR – Complete privacy set with interior
mortise lock and spindle. OR TS-451IML-PR – Trim set only. No lock.
TS-451IML-FD – Trim set only. – Full dummy.
TS-451IML-HD – Trim set only. – Half dummy.
10 1
/2"
3 1/2" 3 1/2"
10 1
/2"
3 1/2" 3 1/2"
10 1
/2"
3 1/2" 3 1/2"
10 1
/2"
3 1/2"
3 1/
2"
3 1/
2"
3 1/
2"
3 1/
2"
3 1/
2"
3 1/
2"
2 1/
4"
3 1/
2"2
1/4"
1/4"
1/4"
1/4"
1/4"
Specify manufacturer & function of interior mortise lock.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.
CS-451IML Passage set. P-451 (ext) P-451 (int)CS-451IML-PR Privacy set. P-451IML-ERC (ext) P-451IML-TPC (int)TS-451IML-FD Full dummy. P-451D (ext) P-451D (int)TS-451IML-HD Half dummy. P-451D
CS-451-8IML Passage set. P-451 (ext) P-451 (int)CS-451-8IML-PR Privacy set. P-451-8IML-ERC (ext) P-451-8IML-TPC (int)
TS-451IML Passage set. P-451 (ext) P-451 (int)TS-451IML-PR Privacy set. P-451IML-ERC (ext) P-451IML-TPC (int)TS-451IML-FD Full dummy. P-451D (ext) P-451D (int)TS-451IML-HD Half dummy. P-451D
TS-451-8IML Passage set. P-451 (ext) P-451 (int)TS-451-8IML-PR Privacy set. P-451-8IML-ERC (ext) P-451-8IML-TPC (int)
Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m
PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.
14-172
Revised 02/08/16
Illustrations are for demonstration purposes only. Any knob, lever or ring pull can be combined with any style or size escutcheon plate.
Complete sets with interior mortise lock and spindle. 2 1/4” center-to-center. (Shown)
Trim sets for interior mortise locks with spindle, no lock included. 2 1/4” center-to-center. (Shown)
Complete sets with interior mortise lock and spindle. 2 7/8” center-to-center.
Trim sets for interior mortise locks with spindle, no lock included. 2 7/8” center-to-center.
2 1/2” or 2 3/4” backset standard.Custom backsets available. Call for options and pricing.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.
F451 TRELLIS INTERIOR MORTISE LOCK PASSAGE & PRIVACY SETS
CS-F451IML – Complete passage set with interior
mortise lock and spindle. OR TS-F451IML – Trim set only. No lock.
CS-F451IML-PR – Complete privacy set with interior
mortise lock and spindle. OR TS-F451IML-PR – Trim set only. No lock.
TS-F451IML-FD – Trim set only. – Full dummy.
TS-F451IML-HD – Trim set only. – Half dummy.
10 1
/2"
3 1/2" 3 1/2"
10 1
/2"
3 1/2" 3 1/2"
10 1
/2"
3 1/2" 3 1/2"
10 1
/2"
3 1/2"
7"7" 7"7" 7"7"
2 1/
4"
1/4"
1/4"
1/4"
1/4"
Specify manufacturer & function of interior mortise lock.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.
CS-F451IML Passage set. P-F451OH (ext) P-F451OH (int)CS-F451IML-PR Privacy set. P-F451OH-IML-ERC (ext) P-F451OH-IML-TPC (int)TS-F451IML-FD Full dummy. P-F451OH-D (ext) P-F451OH-D (int)TS-F451IML-HD Half dummy. P-F451OH-D
CS-F451-8IML Passage set. P-F451 (ext) P-F451 (int)CS-F451-8IML-PR Privacy set. P-F451-8IML-ERC (ext) P-F451-8IML-TPC (int)
TS-F451IML Passage set. P-F451 (ext) P-F451 (int)TS-F451IML-PR Privacy set. P-F451IML-ERC (ext) P-F451IML-TPC (int)TS-F451IML-FD Full dummy. P-F451D (ext) P-F451D (int)TS-F451IML-HD Half dummy. P-F451D
TS-F451-8IML Passage set. P-F451 (ext) P-F451 (int)TS-F451-8IML-PR Privacy set. P-F451-8IML-ERC (ext) P-F451-8IML-TPC (int)
Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m
PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.
14-173
Revised 02/08/16
Illustrations are for demonstration purposes only. Any knob, lever or ring pull can be combined with any style or size escutcheon plate.
Complete sets with interior mortise lock and spindle. 2 1/4” center-to-center.
Trim sets for interior mortise locks with spindle, no lock included. 2 1/4” center-to-center.
2 1/2” or 2 3/4” backset standard.Custom backsets available. Call for options and pricing.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.
366 DECO INTERIOR MORTISE LOCK PASSAGE & PRIVACY SETS
CS-366IML – Complete passage set with interior
mortise lock and spindle. OR TS-366IML – Trim set only. No lock.
CS-366IML-PR – Complete privacy set with interior
mortise lock and spindle. OR TS-366IML-PR – Trim set only. No lock.
TS-366IML-FD – Trim set only. – Full dummy.
TS-366IML-HD – Trim set only. – Half dummy.
7 1/
2"
3" 3"
7 1/
2"
3" 3"
7 1/
2"
3" 3"
7 1/
2"
3"
2 5/
8"
2 5/
8"
2 5/
8"
2 5/
8"
2 5/
8"
2 5/
8"
2 1/
4"
2 5/
8"2
1/4"
Specify manufacturer & function of interior mortise lock.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.
CS-366IML Passage set. P-366OH (ext) P-366OH (int)
CS-366IML-PR Privacy set. P-366OH-IML-ERC (ext) P-366OH-IML-TPC (int)
TS-366IML-FD Full dummy. P-366OH-D (ext) P-366OH-D (int)
TS-366IML-HD Half dummy. P-366OH-D
TS-366IML Passage set. P-366OH (ext) P-366OH (int)
TS-366IML-PR Privacy set. P-366OH-IML-ERC (ext) P-366OH-IML-TPC (int)
TS-366IML-FD Full dummy. P-366OH-D (ext) P-366OH-D (int)
TS-366IML-HD Half dummy. P-366OH-D
Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m
PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.
14-174
Revised 02/08/16
Illustrations are for demonstration purposes only. Any knob, lever or ring pull can be combined with any style or size escutcheon plate.
Complete sets with interior mortise lock and spindle. 2 1/4” center-to-center.
Trim sets for interior mortise locks with spindle, no lock included. 2 1/4” center-to-center.
2 1/2” or 2 3/4” backset standard.Custom backsets available. Call for options and pricing.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.
F366 DECO INTERIOR MORTISE LOCK PASSAGE & PRIVACY SETS
CS-F366IML – Complete passage set with interior
mortise lock and spindle. OR TS-F366IML – Trim set only. No lock.
CS-F366IML-PR – Complete privacy set with interior
mortise lock and spindle. OR TS-F366IML-PR – Trim set only. No lock.
TS-F366IML-FD – Trim set only. – Full dummy.
TS-F366IML-HD – Trim set only. – Half dummy.
7 1/
2"
3" 3"
7 1/
2"
3" 3"
7 1/
2"
3" 3"
7 1/
2"
3"
4 7/
8"
4 7/
8"
4 7/
8"
4 7/
8"
4 7/
8"2 1/
4"
4 7/
8"
Specify manufacturer & function of interior mortise lock.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.
CS-F366IML Passage set. P-F366OH (ext) P-F366OH (int)
CS-F366IML-PR Privacy set. P-F366OH-IML-ERC (ext) P-F366OH-IML-TPC (int)
TS-F366IML-FD Full dummy. P-F366OH-D (ext) P-F366OH-D (int)
TS-F366IML-HD Half dummy. P-F366OH-D
TS-F366IML Passage set. P-F366OH (ext) P-F366OH (int)
TS-F366IML-PR Privacy set. P-F366OH-IML-ERC (ext) P-F366OH-IML-TPC (int)
TS-F366IML-FD Full dummy. P-F366OH-D (ext) P-F366OH-D (int)
TS-F366IML-HD Half dummy. P-F366OH-D
Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m
PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.
14-175
Revised 02/08/16
Illustrations are for demonstration purposes only. Any knob, lever or ring pull can be combined with any style or size escutcheon plate.
Complete sets with interior mortise lock and spindle. 2 1/4” center-to-center. (Shown)
Trim sets for interior mortise locks with spindle, no lock included. 2 1/4” center-to-center. (Shown)
Complete sets with interior mortise lock and spindle. 2 7/8” center-to-center.
Trim sets for interior mortise locks with spindle, no lock included. 2 7/8” center-to-center.
2 1/2” or 2 3/4” backset standard.Custom backsets available. Call for options and pricing.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.
461 DECO INTERIOR MORTISE LOCK PASSAGE & PRIVACY SETS
12"
3" 3"
CS-461IML – Complete passage set with interior
mortise lock and spindle. OR TS-461IML – Trim set only. No lock.
CS-461IML-PR – Complete privacy set with interior
mortise lock and spindle. OR TS-461IML-PR – Trim set only. No lock.
TS-461IML-FD – Trim set only. – Full dummy.
TS-461IML-HD – Trim set only. – Half dummy.
12"
3" 3"
12"
3" 3"
12"
3"
4 1/
4"
4 1/
4"
4 1/
4"
4 1/
4"
4 1/
4"
4 1/
4"
2 1/
4"
4 1/
4"2
1/4"
Specify manufacturer & function of interior mortise lock.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.
CS-461IML Passage set. P-461 (ext) P-461 (int)CS-461IML-PR Privacy set. P-461IML-ERC (ext) P-461IML-TPC (int)TS-461IML-FD Full dummy. P-461D (ext) P-461D (int)TS-461IML-HD Half dummy. P-461D
CS-461-8IML Passage set. P-461 (ext) P-461 (int)CS-461-8IML-PR Privacy set. P-461-8IML-ERC (ext) P-461-8IML-TPC (int)
TS-461IML Passage set. P-461 (ext) P-461 (int)TS-461IML-PR Privacy set. P-461IML-ERC (ext) P-461IML-TPC (int)TS-461IML-FD Full dummy. P-461D (ext) P-461D (int)TS-461IML-HD Half dummy. P-461D
TS-461-8IML Passage set. P-461 (ext) P-461 (int)TS-461-8IML-PR Privacy set. P-461-8IML-ERC (ext) P-461-8IML-TPC (int)
Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m
PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.
14-176
Revised 02/08/16
Illustrations are for demonstration purposes only. Any knob, lever or ring pull can be combined with any style or size escutcheon plate.
Complete sets with interior mortise lock and spindle. 2 1/4” center-to-center. (Shown)
Trim sets for interior mortise locks with spindle, no lock included. 2 1/4” center-to-center. (Shown)
Complete sets with interior mortise lock and spindle. 2 7/8” center-to-center.
Trim sets for interior mortise locks with spindle, no lock included. 2 7/8” center-to-center.
2 1/2” or 2 3/4” backset standard.Custom backsets available. Call for options and pricing.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.
F461 DECO INTERIOR MORTISE LOCK PASSAGE & PRIVACY SETS
12"
3" 3"
CS-F461IML – Complete passage set with interior
mortise lock and spindle. OR TS-F461IML – Trim set only. No lock.
CS-F461IML-PR – Complete privacy set with interior
mortise lock and spindle. OR TS-F461IML-PR – Trim set only. No lock.
TS-F461IML-FD – Trim set only. – Full dummy.
TS-F461IML-HD – Trim set only. – Half dummy.
12"
3" 3"
12"
3" 3"
12"
3"
7 3/
4"
7 3/
4"
7 3/
4"
7 3/
4"
7 3/
4"
7 3/
4"
2 1/
4"
Specify manufacturer & function of interior mortise lock.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.
CS-F461IML Passage set. P-F461 (ext) P-F461 (int)CS-F461IML-PR Privacy set. P-F461IML-ERC (ext) P-F461IML-TPC (int)TS-F461IML-FD Full dummy. P-F461D (ext) P-F461D (int)TS-F461IML-HD Half dummy. P-F461D
CS-F461-8IML Passage set. P-F461 (ext) P-F461 (int)CS-F461-8IML-PR Privacy set. P-F461-8IML-ERC (ext) P-F461-8IML-TPC (int)
TS-F461IML Passage set. P-F461 (ext) P-F461 (int)TS-F461IML-PR Privacy set. P-F461IML-ERC (ext) P-F461IML-TPC (int)TS-F461IML-FD Full dummy. P-F461D (ext) P-F461D (int)TS-F461IML-HD Half dummy. P-F461D
TS-F461-8IML Passage set. P-F461 (ext) P-F461 (int)TS-F461-8IML-PR Privacy set. P-F461-8IML-ERC (ext) P-F461-8IML-TPC (int)
Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m
PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.
14-177
Revised 02/08/16
Illustrations are for demonstration purposes only. Any knob, lever or ring pull can be combined with any style or size escutcheon plate.
Complete sets with interior mortise lock and spindle. 2 1/4” center-to-center.
Trim sets for interior mortise locks with spindle, no lock included. 2 1/4” center-to-center.
2 1/2” or 2 3/4” backset standard.Custom backsets available. Call for options and pricing.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.
1406 CORRUGATED INTERIOR MORTISE LOCK PASSAGE & PRIVACY SETS
CS-1406IML – Complete passage set with interior
mortise lock and spindle. OR TS-1406IML – Trim set only. No lock.
CS-1406IML-PR – Complete privacy set with interior
mortise lock and spindle. OR TS-1406IML-PR – Trim set only. No lock.
TS-1406IML-FD – Trim set only. – Full dummy.
TS-1406IML-HD – Trim set only. – Half dummy.
6"2 1/2" 2 1/2"
6"
2 1/2" 2 1/2"
6"
2 1/2" 2 1/2"
6"
2 1/2"
1 7/
8"
1 7/
8"
1 7/
8"
1 7/
8"
1 7/
8"
1 7/
8"
2 1/
4"
1 7/
8"2
1/4"
Specify manufacturer & function of interior mortise lock.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.
CS-1406IML Passage set. P-1406OH (ext) P-1406OH (int)
CS-1406IML-PR Privacy set. P-1406OH-IML-ERC (ext) P-1406OH-IML-TPC (int)
TS-1406IML-FD Full dummy. P-1406OH-D (ext) P-1406OH-D (int)
TS-1406IML-HD Half dummy. P-1406OH-D
TS-1406IML Passage set. P-1406OH (ext) P-1406OH (int)
TS-1406IML-PR Privacy set. P-1406OH-IML-ERC (ext) P-1406OH-IML-TPC (int)
TS-1406IML-FD Full dummy. P-1406OH-D (ext) P-1406OH-D (int)
TS-1406IML-HD Half dummy. P-1406OH-D
Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m
PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.
14-178
Revised 02/08/16
Illustrations are for demonstration purposes only. Any knob, lever or ring pull can be combined with any style or size escutcheon plate.
Complete sets with interior mortise lock and spindle. 2 1/4” center-to-center.
Trim sets for interior mortise locks with spindle, no lock included. 2 1/4” center-to-center.
2 1/2” or 2 3/4” backset standard.Custom backsets available. Call for options and pricing.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.
F1406 CORRUGATED INTERIOR MORTISE LOCK PASSAGE & PRIVACY SETS
CS-F1406IML – Complete passage set with interior
mortise lock and spindle. OR TS-F1406IML – Trim set only. No lock.
CS-F1406IML-PR – Complete privacy set with interior
mortise lock and spindle. OR TS-F1406IML-PR – Trim set only. No lock.
TS-F1406IML-FD – Trim set only. – Full dummy.
TS-F1406IML-HD – Trim set only. – Half dummy.
6"2 1/2" 2 1/2"
6"
2 1/2" 2 1/2"
6"
2 1/2" 2 1/2"
6"
2 1/2"
4 1/
8"
4 1/
8"
4 1/
8"
4 1/
8"
4 1/
8"
4 1/
8" 2 1/
4"
Specify manufacturer & function of interior mortise lock.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.
CS-F1406IML Passage set. P-F1406OH (ext) P-F1406OH (int)
CS-F1406IML-PR Privacy set. P-F1406OH-IML-ERC (ext) P-F1406OH-IML-TPC (int)
TS-F1406IML-FD Full dummy. P-F1406OH-D (ext) P-F1406OH-D (int)
TS-F1406IML-HD Half dummy. P-F1406OH-D
TS-F1406IML Passage set. P-F1406OH (ext) P-F1406OH (int)
TS-F1406IML-PR Privacy set. P-F1406OH-IML-ERC (ext) P-F1406OH-IML-TPC (int)
TS-F1406IML-FD Full dummy. P-F1406OH-D (ext) P-F1406OH-D (int)
TS-F1406IML-HD Half dummy. P-F1406OH-D
Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m
PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.
14-179
Revised 02/08/16
Illustrations are for demonstration purposes only. Any knob, lever or ring pull can be combined with any style or size escutcheon plate.
Complete sets with interior mortise lock and spindle. 2 1/4” center-to-center. (Shown)
Trim sets for interior mortise locks with spindle, no lock included. 2 1/4” center-to-center. (Shown)
Complete sets with interior mortise lock and spindle. 2 7/8” center-to-center.
Trim sets for interior mortise locks with spindle, no lock included. 2 7/8” center-to-center.
2 1/2” or 2 3/4” backset standard.Custom backsets available. Call for options and pricing.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.
1408 CORRUGATED INTERIOR MORTISE LOCK PASSAGE & PRIVACY SETS
CS-1408IML – Complete passage set with interior
mortise lock and spindle. OR TS-1408IML – Trim set only. No lock.
CS-1408IML-PR – Complete privacy set with interior
mortise lock and spindle. OR TS-1408IML-PR – Trim set only. No lock.
TS-1408IML-FD – Trim set only. – Full dummy.
TS-1408IML-HD – Trim set only. – Half dummy.
8 3/
4"
2 1/2" 2 1/2"
2 3/
4"
2 3/
4"
8 3/
4"
2 1/2" 2 1/2"
2 3/
4"
2 3/
4"
8 3/
4"
2 1/2" 2 1/2"
2 3/
4"
2 3/
4"
8 3/
4"
2 1/2"
2 3/
4"
2 1/
4"
2 1/
4"
Specify manufacturer & function of interior mortise lock.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.
CS-1408IML Passage set. P-1408 (ext) P-1408 (int)CS-1408IML-PR Privacy set. P-1408IML-ERC (ext) P-1408IML-TPC (int)TS-1408IML-FD Full dummy. P-1408D (ext) P-1408D (int)TS-1408IML-HD Half dummy. P-1408D
CS-1408-8IML Passage set. P-1408 (ext) P-1408 (int)CS-1408-8IML-PR Privacy set. P-1408-8IML-ERC (ext) P-1408-8IML-TPC (int)
TS-1408IML Passage set. P-1408 (ext) P-1408 (int)TS-1408IML-PR Privacy set. P-1408IML-ERC (ext) P-1408IML-TPC (int)TS-1408IML-FD Full dummy. P-1408D (ext) P-1408D (int)TS-1408IML-HD Half dummy. P-1408D
TS-1408-8IML Passage set. P-1408 (ext) P-1408 (int)TS-1408-8IML-PR Privacy set. P-1408-8IML-ERC (ext) P-1408-8IML-TPC (int)
Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m
PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.
14-180
Revised 02/08/16
Illustrations are for demonstration purposes only. Any knob, lever or ring pull can be combined with any style or size escutcheon plate.
Complete sets with interior mortise lock and spindle. 2 1/4” center-to-center. (Shown)
Trim sets for interior mortise locks with spindle, no lock included. 2 1/4” center-to-center. (Shown)
Complete sets with interior mortise lock and spindle. 2 7/8” center-to-center.
Trim sets for interior mortise locks with spindle, no lock included. 2 7/8” center-to-center.
2 1/2” or 2 3/4” backset standard.Custom backsets available. Call for options and pricing.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.
F1408 CORRUGATED INTERIOR MORTISE LOCK PASSAGE & PRIVACY SETS
CS-F1408IML – Complete passage set with interior
mortise lock and spindle. OR TS-F1408IML – Trim set only. No lock.
CS-F1408IML-PR – Complete privacy set with interior
mortise lock and spindle. OR TS-F1408IML-PR – Trim set only. No lock.
TS-F1408IML-FD – Trim set only. – Full dummy.
TS-F1408IML-HD – Trim set only. – Half dummy.
8 3/
4"2 1/2" 2 1/2"
6" 6"
8 3/
4"
2 1/2" 2 1/2"
6"
8 3/
4"
2 1/2" 2 1/2"
6" 6"
8 3/
4"
2 1/2"
6"
2 1/
4"
Specify manufacturer & function of interior mortise lock.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.
CS-F1408IML Passage set. P-F1408 (ext) P-F1408 (int)CS-F1408IML-PR Privacy set. P-F1408IML-ERC (ext) P-F1408IML-TPC (int)TS-F1408IML-FD Full dummy. P-F1408D (ext) P-F1408D (int)TS-F1408IML-HD Half dummy. P-F1408D
CS-F1408-8IML Passage set. P-F1408 (ext) P-F1408 (int)CS-F1408-8IML-PR Privacy set. P-F1408-8IML-ERC (ext) P-F1408-8IML-TPC (int)
TS-F1408IML Passage set. P-F1408 (ext) P-F1408 (int)TS-F1408IML-PR Privacy set. P-F1408IML-ERC (ext) P-F1408IML-TPC (int)TS-F1408IML-FD Full dummy. P-F1408D (ext) P-F1408D (int)TS-F1408IML-HD Half dummy. P-F1408D
TS-F1408-8IML Passage set. P-F1408 (ext) P-F1408 (int)TS-F1408-8IML-PR Privacy set. P-F1408-8IML-ERC (ext) P-F1408-8IML-TPC (int)
Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m
PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.
14-181
Revised 02/08/16
Illustrations are for demonstration purposes only. Any knob, lever or ring pull can be combined with any style or size escutcheon plate.
Complete sets with interior mortise lock and spindle. 2 1/4” center-to-center. (Shown)
Trim sets for interior mortise locks with spindle, no lock included. 2 1/4” center-to-center. (Shown)
2 1/2” or 2 3/4” backset standard.Custom backsets available. Call for options and pricing.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.
Complete sets with interior mortise lock and spindle. 2 7/8” center-to-center.
Trim sets for interior mortise locks with spindle, no lock included. 2 7/8” center-to-center.
1410 CORRUGATED INTERIOR MORTISE LOCK PASSAGE & PRIVACY SETS
CS-1410IML – Complete passage set with interior
mortise lock and spindle. OR TS-1410IML – Trim set only. No lock.
CS-1410IML-PR – Complete privacy set with interior
mortise lock and spindle. OR TS-1410IML-PR – Trim set only. No lock.
TS-1410IML-FD – Trim set only. – Full dummy.
TS-1410IML-HD – Trim set only. – Half dummy.
10"
2 1/2" 2 1/2"
10"
2 1/2" 2 1/2"
10"
2 1/2" 2 1/2"
10"
2 1/2"
3" 3" 3" 3" 3" 3"
2 1/
4"
3"2
1/4"
Specify manufacturer & function of interior mortise lock.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.
CS-1410IML Passage set. P-1410 (ext) P-1410 (int)CS-1410IML-PR Privacy set. P-1410IML-ERC (ext) P-1410IML-TPC (int)TS-1410IML-FD Full dummy. P-1410D (ext) P-1410D (int)TS-1410IML-HD Half dummy. P-1410D
CS-1410-8IML Passage set. P-1410 (ext) P-1410 (int)CS-1410-8IML-PR Privacy set. P-1410-8IML-ERC (ext) P-1410-8IML-TPC (int)
TS-1410IML Passage set. P-1410 (ext) P-1410 (int)TS-1410IML-PR Privacy set. P-1410IML-ERC (ext) P-1410IML-TPC (int)TS-1410IML-FD Full dummy. P-1410D (ext) P-1410D (int)TS-1410IML-HD Half dummy. P-1410D
TS-1410-8IML Passage set. P-1410 (ext) P-1410 (int)TS-1410-8IML-PR Privacy set. P-1410-8IML-ERC (ext) P-1410-8IML-TPC (int)
Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m
PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.
14-182
Revised 02/08/16
Illustrations are for demonstration purposes only. Any knob, lever or ring pull can be combined with any style or size escutcheon plate.
Complete sets with interior mortise lock and spindle. 2 1/4” center-to-center. (Shown)
Trim sets for interior mortise locks with spindle, no lock included. 2 1/4” center-to-center. (Shown)
2 1/2” or 2 3/4” backset standard.Custom backsets available. Call for options and pricing.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.
Complete sets with interior mortise lock and spindle. 2 7/8” center-to-center.
Trim sets for interior mortise locks with spindle, no lock included. 2 7/8” center-to-center.
F1410 CORRUGATED INTERIOR MORTISE LOCK PASSAGE & PRIVACY SETS
CS-F1410IML – Complete passage set with interior
mortise lock and spindle. OR TS-F1410IML – Trim set only. No lock.
CS-F1410IML-PR – Complete privacy set with interior
mortise lock and spindle. OR TS-F1410IML-PR – Trim set only. No lock.
TS-F1410IML-FD – Trim set only. – Full dummy.
TS-F1410IML-HD – Trim set only. – Half dummy.
10"
2 1/2" 2 1/2"
10"
2 1/2" 2 1/2"
10"
2 1/2" 2 1/2"
10"
2 1/2"
7"7" 7"7" 7"7"
2 1/
4"
Specify manufacturer & function of interior mortise lock.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.
CS-F1410IML Passage set. P-F1410 (ext) P-F1410 (int)CS-F1410IML-PR Privacy set. P-F1410IML-ERC (ext) P-F1410IML-TPC (int)TS-F1410IML-FD Full dummy. P-F1410D (ext) P-F1410D (int)TS-F1410IML-HD Half dummy. P-F1410D
CS-F1410-8IML Passage set. P-F1410 (ext) P-F1410 (int)CS-F1410-8IML-PR Privacy set. P-F1410-8IML-ERC (ext) P-F1410-8IML-TPC (int)
TS-F1410IML Passage set. P-F1410 (ext) P-F1410 (int)TS-F1410IML-PR Privacy set. P-F1410IML-ERC (ext) P-F1410IML-TPC (int)TS-F1410IML-FD Full dummy. P-F1410D (ext) P-F1410D (int)TS-F1410IML-HD Half dummy. P-F1410D
TS-F1410-8IML Passage set. P-F1410 (ext) P-F1410 (int)TS-F1410-8IML-PR Privacy set. P-F1410-8IML-ERC (ext) P-F1410-8IML-TPC (int)
Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m
PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.
14-183
Revised 02/08/16
Illustrations are for demonstration purposes only. Any knob, lever or ring pull can be combined with any style or size escutcheon plate.
Complete sets with interior mortise lock and spindle. 2 1/4” center-to-center.
Trim sets for interior mortise locks with spindle, no lock included. 2 1/4” center-to-center.
2 1/2” or 2 3/4” backset standard.Custom backsets available. Call for options and pricing.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.*ER ONLY. Not available with release cover.
1505 BANDBOX INTERIOR MORTISE LOCK PASSAGE & PRIVACY SETS
CS-1505IML – Complete passage set with interior
mortise lock and spindle. OR TS-1505IML – Trim set only. No lock.
CS-1505IML-PR – Complete privacy set with interior
mortise lock and spindle. OR TS-1505IML-PR – Trim set only. No lock.
TS-1505IML-FD – Trim set only. – Full dummy.
TS-1505IML-HD – Trim set only. – Half dummy.
6"2"
6" 6"
2" 2" 2" 2" 2"
2 1/
4"
2"2
1/4"
2" 2" 2" 2" 2"
6"
2"
2"
1/4"
1/4"
1/4"
1/4"
Specify manufacturer & function of interior mortise lock.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.*ER ONLY. Not available with release cover.
CS-1505IML Passage set. P-1505OH (ext) P-1505OH (int)
CS-1505IML-PR Privacy set. P-1505OH-IML-ERC (ext) P-1505OH-IML-TPC (int)
TS-1505IML-FD Full dummy. P-1505OH-D (ext) P-1505OH-D (int)
TS-1505IML-HD Half dummy. P-1505OH-D
TS-1505IML Passage set. P-1505OH (ext) P-1505OH (int)
TS-1505IML-PR Privacy set. P-1505OH-IML-ERC (ext) P-1505OH-IML-TPC (int)
TS-1505IML-FD Full dummy. P-1505OH-D (ext) P-1505OH-D (int)
TS-1505IML-HD Half dummy. P-1505OH-D
Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m
PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.
14-184
Revised 02/08/16
Illustrations are for demonstration purposes only. Any knob, lever or ring pull can be combined with any style or size escutcheon plate.
Complete sets with interior mortise lock and spindle. 2 1/4” center-to-center.
Trim sets for interior mortise locks with spindle, no lock included. 2 1/4” center-to-center.
Specify manufacturer & function of interior mortise lock.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.*ER ONLY. Not available with release cover.
2 1/2” or 2 3/4” backset standard.Custom backsets available. Call for options and pricing.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.*ER ONLY. Not available with release cover.
F1505 BANDBOX INTERIOR MORTISE LOCK PASSAGE & PRIVACY SETS
CS-F1505IML – Complete passage set with interior
mortise lock and spindle. OR TS-F1506IML – Trim set only. No lock.
CS-F1505IML-PR – Complete privacy set with interior
mortise lock and spindle. OR TS-F1506IML-PR – Trim set only. No lock.
TS-F1505IML-FD – Trim set only. – Full dummy.
TS-F1505IML-HD – Trim set only. – Half dummy.
6"2"
6" 6"
4" 4" 4" 4"2 1/
4"
4"
2" 2" 2" 2" 2"
6"
4"
2"
1/4"
1/4"
1/4"
1/4"
CS-F1505IML Passage set. P-F1505OH (ext) P-F1505OH (int)
CS-F1505IML-PR Privacy set. P-F1505OH-IML-ERC (ext) P-F1505OH-IML-TPC (int)
TS-F1505IML-FD Full dummy. P-F1505OH-D (ext) P-F1505OH-D (int)
TS-F1505IML-HD Half dummy. P-F1505OH-D
TS-F1505IML Passage set. P-F1505OH (ext) P-F1505OH (int)
TS-F1505IML-PR Privacy set. P-F1505OH-IML-ERC (ext) P-F1505OH-IML-TPC (int)
TS-F1505IML-FD Full dummy. P-F1505OH-D (ext) P-F1505OH-D (int)
TS-F1505IML-HD Half dummy. P-F1505OH-D
Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m
PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.
14-185
Revised 02/08/16
Illustrations are for demonstration purposes only. Any knob, lever or ring pull can be combined with any style or size escutcheon plate.
Complete sets with interior mortise lock and spindle. 2 1/4” center-to-center.
Trim sets for interior mortise locks with spindle, no lock included. 2 1/4” center-to-center.
2 1/2” or 2 3/4” backset standard.Custom backsets available. Call for options and pricing.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.
1506 BANDBOX INTERIOR MORTISE LOCK PASSAGE & PRIVACY SETS
CS-1506IML – Complete passage set with interior
mortise lock and spindle. OR TS-1506IML – Trim set only. No lock.
CS-1506IML-PR – Complete privacy set with interior
mortise lock and spindle. OR TS-1506IML-PR – Trim set only. No lock.
TS-1506IML-FD – Trim set only. – Full dummy.
TS-1506IML-HD – Trim set only. – Half dummy.
6"2 1/2" 2 1/2"
6"
2 1/2" 2 1/2"
6"
2 1/2" 2 1/2"
6"
2 1/2"
2" 2" 2" 2" 2" 2"
2 1/
4"
2"2
1/4"
1/4"
1/4"
1/4"
1/4"
Specify manufacturer & function of interior mortise lock.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.
CS-1506IML Passage set. P-1506OH (ext) P-1506OH (int)
CS-1506IML-PR Privacy set. P-1506OH-IML-ERC (ext) P-1506OH-IML-TPC (int)
TS-1506IML-FD Full dummy. P-1506OH-D (ext) P-1506OH-D (int)
TS-1506IML-HD Half dummy. P-1506OH-D
TS-1506IML Passage set. P-1506OH (ext) P-1506OH (int)
TS-1506IML-PR Privacy set. P-1506OH-IML-ERC (ext) P-1506OH-IML-TPC (int)
TS-1506IML-FD Full dummy. P-1506OH-D (ext) P-1506OH-D (int)
TS-1506IML-HD Half dummy. P-1506OH-D
Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m
PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.
14-186
Revised 02/08/16
Illustrations are for demonstration purposes only. Any knob, lever or ring pull can be combined with any style or size escutcheon plate.
Complete sets with interior mortise lock and spindle. 2 1/4” center-to-center.
Trim sets for interior mortise locks with spindle, no lock included. 2 1/4” center-to-center.
2 1/2” or 2 3/4” backset standard.Custom backsets available. Call for options and pricing.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.
F1506 BANDBOX INTERIOR MORTISE LOCK PASSAGE & PRIVACY SETS
CS-F1506IML – Complete passage set with interior
mortise lock and spindle. OR TS-F1506IML – Trim set only. No lock.
CS-F1506IML-PR – Complete privacy set with interior
mortise lock and spindle. OR TS-F1506IML-PR – Trim set only. No lock.
TS-F1506IML-FD – Trim set only. – Full dummy.
TS-F1506IML-HD – Trim set only. – Half dummy.
6"
2 1/2" 2 1/2"
6"
2 1/2" 2 1/2"
6"
2 1/2" 2 1/2"
6"
2 1/2"
4 1/
8"
4 1/
8"
4 1/
8"
4 1/
8"
4 1/
8"
4 1/
8"
2 1/
4"
1/4"
1/4"
1/4"
1/4"
Specify manufacturer & function of interior mortise lock.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.
CS-F1506IML Passage set. P-F1506OH (ext) P-F1506OH (int)
CS-F1506IML-PR Privacy set. P-F1506OH-IML-ERC (ext) P-F1506OH-IML-TPC (int)
TS-F1506IML-FD Full dummy. P-F1506OH-D (ext) P-F1506OH-D (int)
TS-F1506IML-HD Half dummy. P-F1506OH-D
TS-F1506IML Passage set. P-F1506OH (ext) P-F1506OH (int)
TS-F1506IML-PR Privacy set. P-F1506OH-IML-ERC (ext) P-F1506OH-IML-TPC (int)
TS-F1506IML-FD Full dummy. P-F1506OH-D (ext) P-F1506OH-D (int)
TS-F1506IML-HD Half dummy. P-F1506OH-D
Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m
PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.
14-187
Revised 02/08/16
Illustrations are for demonstration purposes only. Any knob, lever or ring pull can be combined with any style or size escutcheon plate.
Complete sets with interior mortise lock and spindle. 2 1/4” center-to-center. (Shown)
Trim sets for interior mortise locks with spindle, no lock included. 2 1/4” center-to-center. (Shown)
Complete sets with interior mortise lock and spindle. 2 7/8” center-to-center.
Trim sets for interior mortise locks with spindle, no lock included. 2 7/8” center-to-center.
2 1/2” or 2 3/4” backset standard.Custom backsets available. Call for options and pricing.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.
1510 BANDBOX INTERIOR MORTISE LOCK PASSAGE & PRIVACY SETS
CS-1510IML – Complete passage set with interior
mortise lock and spindle. OR TS-1510IML – Trim set only. No lock.
CS-1510IML-PR – Complete privacy set with interior
mortise lock and spindle. OR TS-1510IML-PR – Trim set only. No lock.
TS-1510IML-FD – Trim set only. – Full dummy.
TS-1510IML-HD – Trim set only. – Half dummy.
10"
2 1/2" 2 1/2"
10"
2 1/2" 2 1/2"
10"
2 1/2" 2 1/2"
10"
2 1/2"
3" 3" 3" 3" 3" 3"
2 1/
4"
3"2
1/4"
1/4"
1/4"
1/4"
1/4"
Specify manufacturer & function of interior mortise lock.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.
CS-1510IML Passage set. P-1510 (ext) P-1510 (int)CS-1510IML-PR Privacy set. P-1510IML-ERC (ext) P-1510IML-TPC (int)TS-1510IML-FD Full dummy. P-1510D (ext) P-1510D (int)TS-1510IML-HD Half dummy. P-1510D
CS-1510-8IML Passage set. P-1510 (ext) P-1510 (int)CS-1510-8IML-PR Privacy set. P-1510-8IML-ERC (ext) P-1510-8IML-TPC (int)
TS-1510IML Passage set. P-1510 (ext) P-1510 (int)TS-1510IML-PR Privacy set. P-1510IML-ERC (ext) P-1510IML-TPC (int)TS-1510IML-FD Full dummy. P-1510D (ext) P-1510D (int)TS-1510IML-HD Half dummy. P-1510D
TS-1510-8IML Passage set. P-1510 (ext) P-1510 (int)TS-1510-8IML-PR Privacy set. P-1510-8IML-ERC (ext) P-1510-8IML-TPC (int)
Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m
PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.
14-188
Revised 02/08/16
Illustrations are for demonstration purposes only. Any knob, lever or ring pull can be combined with any style or size escutcheon plate.
Complete sets with interior mortise lock and spindle. 2 1/4” center-to-center. (Shown)
Trim sets for interior mortise locks with spindle, no lock included. 2 1/4” center-to-center. (Shown)
Complete sets with interior mortise lock and spindle. 2 7/8” center-to-center.
Trim sets for interior mortise locks with spindle, no lock included. 2 7/8” center-to-center.
2 1/2” or 2 3/4” backset standard.Custom backsets available. Call for options and pricing.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.
F1510 BANDBOX INTERIOR MORTISE LOCK PASSAGE & PRIVACY SETS
CS-F1510IML – Complete passage set with interior
mortise lock and spindle. OR TS-F1510IML – Trim set only. No lock.
CS-F1510IML-PR – Complete privacy set with interior
mortise lock and spindle. OR TS-F1510IML-PR – Trim set only. No lock.
TS-F1510IML-FD – Trim set only. – Full dummy.
TS-F1510IML-HD – Trim set only. – Half dummy.
10"
2 1/2" 2 1/2"
10"
2 1/2" 2 1/2"
10"
2 1/2" 2 1/2"
10"
2 1/2"
7"7" 7"7" 7"7"
2 1/
4"
1/4"
1/4"
1/4"
1/4"
Specify manufacturer & function of interior mortise lock.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.
CS-F1510IML Passage set. P-F1510 (ext) P-F1510 (int)CS-F1510IML-PR Privacy set. P-F1510IML-ERC (ext) P-F1510IML-TPC (int)TS-F1510IML-FD Full dummy. P-F1510D (ext) P-F1510D (int)TS-F1510IML-HD Half dummy. P-F1510D
CS-F1510-8IML Passage set. P-F1510 (ext) P-F1510 (int)CS-F1510-8IML-PR Privacy set. P-F1510-8IML-ERC (ext) P-F1510-8IML-TPC (int)
TS-F1510IML Passage set. P-F1510 (ext) P-F1510 (int)TS-F1510IML-PR Privacy set. P-F1510IML-ERC (ext) P-F1510IML-TPC (int)TS-F1510IML-FD Full dummy. P-F1510D (ext) P-F1510D (int)TS-F1510IML-HD Half dummy. P-F1510D
TS-F1510-8IML Passage set. P-F1510 (ext) P-F1510 (int)TS-F1510-8IML-PR Privacy set. P-F1510-8IML-ERC (ext) P-F1510-8IML-TPC (int)
Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m
PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.
14-189
Revised 02/08/16
Illustrations are for demonstration purposes only. Any knob, lever or ring pull can be combined with any style or size escutcheon plate.
Complete sets with interior mortise lock and spindle. 2 1/4” center-to-center. (Shown)
Trim sets for interior mortise locks with spindle, no lock included. 2 1/4” center-to-center. (Shown)
2 1/2” or 2 3/4” backset standard.Custom backsets available. Call for options and pricing.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.
Complete sets with interior mortise lock and spindle. 2 7/8” center-to-center.
Trim sets for interior mortise locks with spindle, no lock included. 2 7/8” center-to-center.
1511 BANDBOX INTERIOR MORTISE LOCK PASSAGE & PRIVACY SETS
CS-1511IML – Complete passage set with interior
mortise lock and spindle. OR TS-1511IML – Trim set only. No lock.
CS-1511IML-PR – Complete privacy set with interior
mortise lock and spindle. OR TS-1511IML-PR – Trim set only. No lock.
TS-1511IML-FD – Trim set only. – Full dummy.
TS-1511IML-HD – Trim set only. – Half dummy.
10"
3" 3"
3 1/
4"
3 1/
4"
2 1/
4"
2 1/
4" 10"
3" 3"
3 1/
4"
3 1/
4"
10"
3" 3"
3 1/
4"
3 1/
4"
10"
3"
3 1/
4"
1/4"
1/4"
1/4"
1/4"
Specify manufacturer & function of interior mortise lock.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.
CS-1511IML Passage set. P-1511 (ext) P-1511 (int)CS-1511IML-PR Privacy set. P-1511IML-ERC (ext) P-1511IML-TPC (int)TS-1511IML-FD Full dummy. P-1511D (ext) P-1511D (int)TS-1511IML-HD Half dummy. P-1511D
CS-1511-8IML Passage set. P-1511 (ext) P-1511 (int)CS-1511-8IML-PR Privacy set. P-1511-8IML-ERC (ext) P-1511-8IML-TPC (int)
TS-1511IML Passage set. P-1511 (ext) P-1511 (int)TS-1511IML-PR Privacy set. P-1511IML-ERC (ext) P-1511IML-TPC (int)TS-1511IML-FD Full dummy. P-1511D (ext) P-1511D (int)TS-1511IML-HD Half dummy. P-1511D
TS-1511-8IML Passage set. P-1511 (ext) P-1511 (int)TS-1511-8IML-PR Privacy set. P-1511-8IML-ERC (ext) P-1511-8IML-TPC (int)
Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m
PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.
14-190
Revised 02/08/16
Illustrations are for demonstration purposes only. Any knob, lever or ring pull can be combined with any style or size escutcheon plate.
Complete sets with interior mortise lock and spindle. 2 1/4” center-to-center. (Shown)
Trim sets for interior mortise locks with spindle, no lock included. 2 1/4” center-to-center. (Shown)
2 1/2” or 2 3/4” backset standard.Custom backsets available. Call for options and pricing.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.
Complete sets with interior mortise lock and spindle. 2 7/8” center-to-center.
Trim sets for interior mortise locks with spindle, no lock included. 2 7/8” center-to-center.
F1511 BANDBOX INTERIOR MORTISE LOCK PASSAGE & PRIVACY SETS
CS-F1511IML – Complete passage set with interior
mortise lock and spindle. OR TS-F1511IML – Trim set only. No lock.
CS-F1511IML-PR – Complete privacy set with interior
mortise lock and spindle. OR TS-F1511IML-PR – Trim set only. No lock.
TS-F1511IML-FD – Trim set only. – Full dummy.
TS-F1511IML-HD – Trim set only. – Half dummy.
10"
3" 3"
6 3/
4"
6 3/
4"
2 1/
4"
10"
3" 3"
6 3/
4"
10"
3" 3"
6 3/
4"
6 3/
4"
10"
3"
6 3/
4"
1/4"
1/4"
1/4"
1/4"
Specify manufacturer & function of interior mortise lock.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.
CS-F1511IML Passage set. P-F1511 (ext) P-F1511 (int)CS-F1511IML-PR Privacy set. P-F1511IML-ERC (ext) P-F1511IML-TPC (int)TS-F1511IML-FD Full dummy. P-F1511D (ext) P-F1511D (int)TS-F1511IML-HD Half dummy. P-F1511D
CS-F1511-8IML Passage set. P-F1511 (ext) P-F1511 (int)CS-F1511-8IML-PR Privacy set. P-F1511-8IML-ERC (ext) P-F1511-8IML-TPC (int)
TS-F1511IML Passage set. P-F1511 (ext) P-F1511 (int)TS-F1511IML-PR Privacy set. P-F1511IML-ERC (ext) P-F1511IML-TPC (int)TS-F1511IML-FD Full dummy. P-F1511D (ext) P-F1511D (int)TS-F1511IML-HD Half dummy. P-F1511D
TS-F1511-8IML Passage set. P-F1511 (ext) P-F1511 (int)TS-F1511-8IML-PR Privacy set. P-F1511-8IML-ERC (ext) P-F1511-8IML-TPC (int)
Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m
PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.
14-191
Revised 02/08/16
Illustrations are for demonstration purposes only. Any knob, lever or ring pull can be combined with any style or size escutcheon plate.
1512 BANDBOX INTERIOR MORTISE LOCK PASSAGE & PRIVACY SETS
Complete sets with interior mortise lock and spindle. 2 1/4” center-to-center. (Shown)
Trim sets for interior mortise locks with spindle, no lock included. 2 1/4” center-to-center. (Shown)
2 1/2” or 2 3/4” backset standard.Custom backsets available. Call for options and pricing.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.
Complete sets with interior mortise lock and spindle. 2 7/8” center-to-center.
Trim sets for interior mortise locks with spindle, no lock included. 2 7/8” center-to-center.
Specify manufacturer & function of interior mortise lock.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.
CS-1512IML – Complete passage set with interior
mortise lock and spindle. OR TS-1512IML – Trim set only. No lock.
CS-1512IML-PR – Complete privacy set with interior
mortise lock and spindle. OR TS-1512IML-PR – Trim set only. No lock.
TS-1512IML-FD – Trim set only. – Full dummy.
TS-1512IML-HD – Trim set only. – Half dummy.
11 1
/2"
3 1/2" 3 1/2"3
1/2"
3 1/
2"
2 1/
4"
2 1/
4" 11 1
/2"
3 1/2" 3 1/2"
3 1/
2"
3 1/
2"
11 1
/2"
3 1/2" 3 1/2"
3 1/
2"
3 1/
2"
11 1
/2"
3 1/2"
3 1/
2"
1/4"
1/4"
1/4"
1/4"
CS-1512IML Passage set. P-1512 (ext) P-1512 (int)CS-1512IML-PR Privacy set. P-1512IML-ERC (ext) P-1512IML-TPC (int)TS-1512IML-FD Full dummy. P-1512D (ext) P-1512D (int)TS-1512IML-HD Half dummy. P-1512D
CS-1512-8IML Passage set. P-1512 (ext) P-1512 (int)CS-1512-8IML-PR Privacy set. P-1512-8IML-ERC (ext) P-1512-8IML-TPC (int)
TS-1512IML Passage set. P-1512 (ext) P-1512 (int)TS-1512IML-PR Privacy set. P-1512IML-ERC (ext) P-1512IML-TPC (int)TS-1512IML-FD Full dummy. P-1512D (ext) P-1512D (int)TS-1512IML-HD Half dummy. P-1512D
TS-1512-8IML Passage set. P-1512 (ext) P-1512 (int)TS-1512-8IML-PR Privacy set. P-1512-8IML-ERC (ext) P-1512-8IML-TPC (int)
Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m
PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.
14-192
Revised 02/08/16
Illustrations are for demonstration purposes only. Any knob, lever or ring pull can be combined with any style or size escutcheon plate.
F1512 BANDBOX INTERIOR MORTISE LOCK PASSAGE & PRIVACY SETS
Complete sets with interior mortise lock and spindle. 2 1/4” center-to-center. (Shown)
Trim sets for interior mortise locks with spindle, no lock included. 2 1/4” center-to-center. (Shown)
2 1/2” or 2 3/4” backset standard.Custom backsets available. Call for options and pricing.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.
Complete sets with interior mortise lock and spindle. 2 7/8” center-to-center.
Trim sets for interior mortise locks with spindle, no lock included. 2 7/8” center-to-center.
CS-F1512IML – Complete passage set with interior
mortise lock and spindle. OR TS-F1512IML – Trim set only. No lock.
CS-F1512IML-PR – Complete privacy set with interior
mortise lock and spindle. OR TS-F1512IML-PR – Trim set only. No lock.
TS-F1512IML-FD – Trim set only. – Full dummy.
TS-F1512IML-HD – Trim set only. – Half dummy.
11 1
/2"
3 1/2" 3 1/2"
8" 8"
2 1/
4"
11 1
/2"
3 1/2" 3 1/2"
8"
11 1
/2"
3 1/2" 3 1/2"
8" 8"
11 1
/2"
3 1/2"
8"
1/4"
1/4"
1/4"
1/4"
Specify manufacturer & function of interior mortise lock.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.
CS-F1512IML Passage set. P-F1512 (ext) P-F1512 (int)CS-F1512IML-PR Privacy set. P-F1512IML-ERC (ext) P-F1512IML-TPC (int)TS-F1512IML-FD Full dummy. P-F1512D (ext) P-F1512D (int)TS-F1512IML-HD Half dummy. P-F1512D
CS-F1512-8IML Passage set. P-F1512 (ext) P-F1512 (int)CS-F1512-8IML-PR Privacy set. P-F1512-8IML-ERC (ext) P-F1512-8IML-TPC (int)
TS-F1512IML Passage set. P-F1512 (ext) P-F1512 (int)TS-F1512IML-PR Privacy set. P-F1512IML-ERC (ext) P-F1512IML-TPC (int)TS-F1512IML-FD Full dummy. P-F1512D (ext) P-F1512D (int)TS-F1512IML-HD Half dummy. P-F1512D
TS-F1512-8IML Passage set. P-F1512 (ext) P-F1512 (int)TS-F1512-8IML-PR Privacy set. P-F1512-8IML-ERC (ext) P-F1512-8IML-TPC (int)
Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m
PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.
14-193
Revised 02/08/16
Illustrations are for demonstration purposes only. Any knob, lever or ring pull can be combined with any style or size escutcheon plate.
Complete sets with interior mortise lock and spindle. 2 1/4” center-to-center.
Trim sets for interior mortise locks with spindle, no lock included. 2 1/4” center-to-center.
2 1/2” or 2 3/4” backset standard.Custom backsets available. Call for options and pricing.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.UPCHARGE: A separate charge for hand peened knobs, levers or turn pieces applies. Refer to Sections 2 & 4.Hand peened orders do NOT qualify for return and are non-refundable.
HP1506 HAND PEENED INTERIOR MORTISE LOCK PASSAGE & PRIVACY SETS
6"
2 1/2" 2 1/2"
CS-HP1506IML – Complete passage set with interior
mortise lock and spindle. OR TS-HP1506IML – Trim set only. No lock.
CS-HP1506IML-PR – Complete privacy set with interior
mortise lock and spindle. OR TS-HP1506IML-PR – Trim set only. No lock.
TS-HP1506IML-FD – Trim set only. – Full dummy.
TS-HP1506IML-HD – Trim set only. – Half dummy.
6"2 1/2" 2 1/2"
6"
2 1/2" 2 1/2"
6"
2 1/2"
2" 2" 2" 2" 2" 2"
2 1/
4"
2"2
1/4"
1/4"
1/4"
1/4"
1/4"
Specify manufacturer & function of interior mortise lock.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.UPCHARGE: A separate charge for hand peened knobs, levers or turn pieces applies. Refer to Sections 2 & 4.Hand peened orders do NOT qualify for return and are non-refundable.
CS-HP1506IML Passage set. P-HP1506OH (ext) P-HP1506OH (int)
CS-HP1506IML-PR Privacy set. P-HP1506OH-IML-ERC (ext) P-HP1506OH-IML-TPC (int)
TS-HP1506IML-FD Full dummy. P-HP1506OH-D (ext) P-HP1506OH-D (int)
TS-HP1506IML-HD Half dummy. P-HP1506OH-D
TS-HP1506IML Passage set. P-HP1506OH (ext) P-HP1506OH (int)
TS-HP1506IML-PR Privacy set. P-HP1506OH-IML-ERC (ext) P-HP1506OH-IML-TPC (int)
TS-HP1506IML-FD Full dummy. P-HP1506OH-D (ext) P-HP1506OH-D (int)
TS-HP1506IML-HD Half dummy. P-HP1506OH-D
Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m
PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.
14-194
Revised 02/08/16
Illustrations are for demonstration purposes only. Any knob, lever or ring pull can be combined with any style or size escutcheon plate.
Complete sets with interior mortise lock and spindle. 2 1/4” center-to-center.
Trim sets for interior mortise locks with spindle, no lock included. 2 1/4” center-to-center.
2 1/2” or 2 3/4” backset standard.Custom backsets available. Call for options and pricing.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.UPCHARGE: A separate charge for hand peened knobs, levers or turn pieces applies. Refer to Sections 2 & 4.Hand peened orders do NOT qualify for return and are non-refundable.
F-HP1506 HAND PEENED INTERIOR MORTISE LOCK PASSAGE & PRIVACY SETS
6"
2 1/2" 2 1/2"
CS-F-HP1506IML – Complete passage set with interior
mortise lock and spindle. OR TS-F-HP1506IML – Trim set only. No lock.
CS-F-HP1506IML-PR – Complete privacy set with interior
mortise lock and spindle. OR TS-F-HP1506IML-PR – Trim set only. No lock.
TS-F-HP1506IML-FD – Trim set only. – Full dummy.
TS-F-HP1506IML-HD – Trim set only. – Half dummy.
6"2 1/2" 2 1/2"
6"
2 1/2" 2 1/2"
6"
2 1/2"
4 1/
8"
4 1/
8"
4 1/
8"
4 1/
8"
4 1/
8"
4 1/
8"
2 1/
4"
1/4"
1/4"
1/4"
1/4"
Specify manufacturer & function of interior mortise lock.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.UPCHARGE: A separate charge for hand peened knobs, levers or turn pieces applies. Refer to Sections 2 & 4.Hand peened orders do NOT qualify for return and are non-refundable.
CS-F-HP1506IML Passage set. P-F-HP1506OH (ext) P-F-HP1506OH (int)
CS-F-HP1506IML-PR Privacy set. P-F-HP1506OH-IML-ERC (ext) P-F-HP1506OH-IML-TPC (int)
TS-F-HP1506IML-FD Full dummy. P-F-HP1506OH-D (ext) P-F-HP1506OH-D (int)
TS-F-HP1506IML-HD Half dummy. P-F-HP1506OH-D
TS-F-HP1506IML Passage set. P-F-HP1506OH (ext) P-F-HP1506OH (int)
TS-F-HP1506IML-PR Privacy set. P-F-HP1506IML-ERC (ext) P-F-HP1506IML-TPC (int)
TS-F-HP1506IML-FD Full dummy. P-F-HP1506OH-D (ext) P-F-HP1506OH-D (int)
TS-F-HP1506IML-HD Half dummy. P-F-HP1506OH-D
Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m
PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.
14-195
Revised 02/08/16
Illustrations are for demonstration purposes only. Any knob, lever or ring pull can be combined with any style or size escutcheon plate.
Complete sets with interior mortise lock and spindle. 2 1/4” center-to-center. (Shown)
Trim sets for interior mortise locks with spindle, no lock included. 2 1/4” center-to-center. (Shown)
Complete sets with interior mortise lock and spindle. 2 7/8” center-to-center.
Trim sets for interior mortise locks with spindle, no lock included. 2 7/8” center-to-center.
2 1/2” or 2 3/4” backset standard.Custom backsets available. Call for options and pricing.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.UPCHARGE: A separate charge for hand peened knobs, levers or turn pieces applies. Refer to Sections 2 & 4.Hand peened orders do NOT qualify for return and are non-refundable.
HP1510 HAND PEENED INTERIOR MORTISE LOCK PASSAGE & PRIVACY SETS
10"
2 1/2" 2 1/2"
CS-HP1510IML – Complete passage set with interior
mortise lock and spindle. OR TS-HP1510IML – Trim set only. No lock.
CS-HP1510IML-PR – Complete privacy set with interior
mortise lock and spindle. OR TS-HP1510IML-PR – Trim set only. No lock.
TS-HP1510IML-FD – Trim set only. – Full dummy.
TS-HP1510IML-HD – Trim set only. – Half dummy.
10"
2 1/2" 2 1/2"
10"
2 1/2" 2 1/2"
10"
2 1/2"
3" 3" 3" 3" 3" 3"
2 1/
4"
3"2
1/4"
1/4"
1/4"
1/4"
1/4"
Specify manufacturer & function of interior mortise lock.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.UPCHARGE: A separate charge for hand peened knobs, levers or turn pieces applies. Refer to Sections 2 & 4.Hand peened orders do NOT qualify for return and are non-refundable.
CS-HP1510IML Passage set. P-HP1510 (ext) P-HP1510 (int)CS-HP1510IML-PR Privacy set. P-HP1510IML-ERC (ext) P-HP1510IML-TPC (int)TS-HP1510IML-FD Full dummy. P-HP1510D (ext) P-HP1510D (int)TS-HP1510IML-HD Half dummy. P-HP1510D
CS-HP1510-8IML Passage set. P-HP1510 (ext) P-HP1510 (int)CS-HP1510-8IML-PR Privacy set. P-HP1510-8IML-ERC (ext) P-HP1510-8IML-TPC (int)
TS-HP1510IML Passage set. P-HP1510 (ext) P-HP1510 (int)TS-HP1510IML-PR Privacy set. P-HP1510IML-ERC (ext) P-HP1510IML-TPC (int)TS-HP1510IML-FD Full dummy. P-HP1510D (ext) P-HP1510D (int)TS-HP1510IML-HD Half dummy. P-HP1510D
TS-HP1510-8IML Passage set. P-HP1510 (ext) P-HP1510 (int)TS-HP1510-8IML-PR Privacy set. P-HP1510-8IML-ERC (ext) P-HP1510-8IML-TPC (int)
Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m
PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.
14-196
Revised 02/08/16
Illustrations are for demonstration purposes only. Any knob, lever or ring pull can be combined with any style or size escutcheon plate.
Complete sets with interior mortise lock and spindle. 2 1/4” center-to-center. (Shown)
Trim sets for interior mortise locks with spindle, no lock included. 2 1/4” center-to-center. (Shown)
Complete sets with interior mortise lock and spindle. 2 7/8” center-to-center.
Trim sets for interior mortise locks with spindle, no lock included. 2 7/8” center-to-center.
2 1/2” or 2 3/4” backset standard.Custom backsets available. Call for options and pricing.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.UPCHARGE: A separate charge for hand peened knobs, levers or turn pieces applies. Refer to Sections 2 & 4.Hand peened orders do NOT qualify for return and are non-refundable.
F-HP1510 HAND PEENED INTERIOR MORTISE LOCK PASSAGE & PRIVACY SETS
10"
2 1/2" 2 1/2"
CS-F-HP1510IML – Complete passage set with interior
mortise lock and spindle. OR TS-F-HP1510IML – Trim set only. No lock.
CS-F-HP1510IML-PR – Complete privacy set with interior
mortise lock and spindle. OR TS-F-HP1510IML-PR – Trim set only. No lock.
TS-F-HP1510IML-FD – Trim set only. – Full dummy.
TS-F-HP1510IML-HD – Trim set only. – Half dummy.
10"
2 1/2" 2 1/2"
10"
2 1/2" 2 1/2"
10"
2 1/2"
7"7" 7"7" 7"7"
2 1/
4"
1/4"
1/4"
1/4"
1/4"
Specify manufacturer & function of interior mortise lock.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.UPCHARGE: A separate charge for hand peened knobs, levers or turn pieces applies. Refer to Sections 2 & 4.Hand peened orders do NOT qualify for return and are non-refundable.
CS-F-HP1510IML Passage set. P-F-HP1510 (ext) P-F-HP1510 (int)CS-F-HP1510IML-PR Privacy set. P-F-HP1510IML-ERC (ext) P-F-HP1510IML-TPC (int)TS-F-HP1510IML-FD Full dummy. P-F-HP1510D (ext) P-F-HP1510D (int)TS-F-HP1510IML-HD Half dummy. P-F-HP1510D
CS-F-HP1510-8IML Passage set. P-F-HP1510 (ext) P-F-HP1510 (int)CS-F-HP1510-8IML-PR Privacy set. P-F-HP1510-8IML-ERC (ext) P-F-HP1510-8IML-TPC (int)
TS-F-HP1510IML Passage set. P-F-HP1510 (ext) P-F-HP1510 (int)TS-F-HP1510IML-PR Privacy set. P-F-HP1510IML-ERC (ext) P-F-HP1510IML-TPC (int)TS-F-HP1510IML-FD Full dummy. P-F-HP1510D (ext) P-F-HP1510D (int)TS-F-HP1510IML-HD Half dummy. P-F-HP1510D
TS-F-HP1510-8IML Passage set. P-F-HP1510 (ext) P-F-HP1510 (int)TS-F-HP1510-8IML-PR Privacy set. P-F-HP1510-8IML-ERC (ext) P-F-HP1510-8IML-TPC (int)
Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m
PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.
14-197
Revised 02/08/16
Illustrations are for demonstration purposes only. Any knob, lever or ring pull can be combined with any style or size escutcheon plate.
Complete sets with interior mortise lock and spindle. 2 1/4” center-to-center. (Shown)
Trim sets for interior mortise locks with spindle, no lock included. 2 1/4” center-to-center. (Shown)
2 1/2” or 2 3/4” backset standard.Custom backsets available. Call for options and pricing.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.UPCHARGE: A separate charge for hand peened knobs, levers or turn pieces applies. Refer to Sections 2 & 4.Hand peened orders do NOT qualify for return and are non-refundable.
Complete sets with interior mortise lock and spindle. 2 7/8” center-to-center.
Trim sets for interior mortise locks with spindle, no lock included. 2 7/8” center-to-center.
HP1511 HAND PEENED INTERIOR MORTISE LOCK PASSAGE & PRIVACY SETS
CS-HP1511IML – Complete passage set with interior
mortise lock and spindle. OR TS-HP1511IML – Trim set only. No lock.
CS-HP1511IML-PR – Complete privacy set with interior
mortise lock and spindle. OR TS-HP1511IML-PR – Trim set only. No lock.
TS-HP1511IML-FD – Trim set only. – Full dummy.
TS-HP1511IML-HD – Trim set only. – Half dummy.
10"
3" 3"
3 1/
4"
3 1/
4"
2 1/
4"
2 1/
4" 10"
3" 3"
3 1/
4"
3 1/
4"
10"
3" 3"
3 1/
4"
3 1/
4"
10"
3"
3 1/
4"
1/4"
1/4"
1/4"
1/4"
Specify manufacturer & function of interior mortise lock.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.UPCHARGE: A separate charge for hand peened knobs, levers or turn pieces applies. Refer to Sections 2 & 4.Hand peened orders do NOT qualify for return and are non-refundable.
CS-HP1511IML Passage set. P-HP1511 (ext) P-HP1511 (int)CS-HP1511IML-PR Privacy set. P-HP1511IML-ERC (ext) P-HP1511IML-TPC (int)TS-HP1511IML-FD Full dummy. P-HP1511D (ext) P-HP1511D (int)TS-HP1511IML-HD Half dummy. P-HP1511D
CS-HP1511-8IML Passage set. P-HP1511 (ext) P-HP1511 (int)CS-HP1511-8IML-PR Privacy set. P-HP1511-8IML-ERC (ext) P-HP1511-8IML-TPC (int)
TS-HP1511IML Passage set. P-HP1511 (ext) P-HP1511 (int)TS-HP1511IML-PR Privacy set. P-HP1511IML-ERC (ext) P-HP1511IML-TPC (int)TS-HP1511IML-FD Full dummy. P-HP1511D (ext) P-HP1511D (int)TS-HP1511IML-HD Half dummy. P-HP1511D
TS-HP1511-8IML Passage set. P-HP1511 (ext) P-HP1511 (int)TS-HP1511-8IML-PR Privacy set. P-HP1511-8IML-ERC (ext) P-HP1511-8IML-TPC (int)
Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m
PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.
14-198
Revised 02/08/16
Illustrations are for demonstration purposes only. Any knob, lever or ring pull can be combined with any style or size escutcheon plate.
Complete sets with interior mortise lock and spindle. 2 1/4” center-to-center. (Shown)
Trim sets for interior mortise locks with spindle, no lock included. 2 1/4” center-to-center. (Shown)
2 1/2” or 2 3/4” backset standard.Custom backsets available. Call for options and pricing.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.UPCHARGE: A separate charge for hand peened knobs, levers or turn pieces applies. Refer to Sections 2 & 4.Hand peened orders do NOT qualify for return and are non-refundable.
Complete sets with interior mortise lock and spindle. 2 7/8” center-to-center.
Trim sets for interior mortise locks with spindle, no lock included. 2 7/8” center-to-center.
F-HP1511 HAND PEENED INTERIOR MORTISE LOCK PASSAGE & PRIVACY SETS
CS-F-HP1511IML – Complete passage set with interior
mortise lock and spindle. OR TS-F-HP1511IML – Trim set only. No lock.
CS-F-HP1511IML-PR – Complete privacy set with interior
mortise lock and spindle. OR TS-F-HP1511IML-PR – Trim set only. No lock.
TS-F-HP1511IML-FD – Trim set only. – Full dummy.
TS-F-HP1511IML-HD – Trim set only. – Half dummy.
10"
3" 3"
6 3/
4"
6 3/
4"
2 1/
4"
10"
3" 3"
6 3/
4"
10"
3" 3"
6 3/
4"
6 3/
4"
10"
3"
6 3/
4"
1/4"
1/4"
1/4"
1/4"
Specify manufacturer & function of interior mortise lock.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.UPCHARGE: A separate charge for hand peened knobs, levers or turn pieces applies. Refer to Sections 2 & 4.Hand peened orders do NOT qualify for return and are non-refundable.
CS-F-HP1511IML Passage set. P-F-HP1511 (ext) P-F-HP1511 (int)CS-F-HP1511IML-PR Privacy set. P-F-HP1511IML-ERC (ext) P-F-HP1511IML-TPC (int)TS-F-HP1511IML-FD Full dummy. P-F-HP1511D (ext) P-F-HP1511D (int)TS-F-HP1511IML-HD Half dummy. P-F-HP1511D
CS-F-HP1511-8IML Passage set. P-F-HP1511 (ext) P-F-HP1511 (int)CS-F-HP1511-8IML-PR Privacy set. P-F-HP1511-8IML-ERC (ext) P-F-HP1511-8IML-TPC (int)
TS-F-HP1511IML Passage set. P-F-HP1511 (ext) P-F-HP1511 (int)TS-F-HP1511IML-PR Privacy set. P-F-HP1511IML-ERC (ext) P-F-HP1511IML-TPC (int)TS-F-HP1511IML-FD Full dummy. P-F-HP1511D (ext) P-F-HP1511D (int)TS-F-HP1511IML-HD Half dummy. P-F-HP1511D
TS-F-HP1511-8IML Passage set. P-F-HP1511 (ext) P-F-HP1511 (int)TS-F-HP1511-8IML-PR Privacy set. P-F-HP1511-8IML-ERC (ext) P-F-HP1511-8IML-TPC (int)
Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m
PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.
14-199
Revised 02/08/16
Illustrations are for demonstration purposes only. Any knob, lever or ring pull can be combined with any style or size escutcheon plate.
HP1512 HAND PEENED INTERIOR MORTISE LOCK PASSAGE & PRIVACY SETS
Complete sets with interior mortise lock and spindle. 2 1/4” center-to-center. (Shown)
Trim sets for interior mortise locks with spindle, no lock included. 2 1/4” center-to-center. (Shown)
2 1/2” or 2 3/4” backset standard.Custom backsets available. Call for options and pricing.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.UPCHARGE: A separate charge for hand peened knobs, levers or turn pieces applies. Refer to Sections 2 & 4.Hand peened orders do NOT qualify for return and are non-refundable.
Complete sets with interior mortise lock and spindle. 2 7/8” center-to-center.
Trim sets for interior mortise locks with spindle, no lock included. 2 7/8” center-to-center.
Specify manufacturer & function of interior mortise lock.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.UPCHARGE: A separate charge for hand peened knobs, levers or turn pieces applies. Refer to Sections 2 & 4.Hand peened orders do NOT qualify for return and are non-refundable.
CS-HP1512IML – Complete passage set with interior
mortise lock and spindle. OR TS-HP1512IML – Trim set only. No lock.
CS-HP1512IML-PR – Complete privacy set with interior
mortise lock and spindle. OR TS-HP1512IML-PR – Trim set only. No lock.
TS-HP1512IML-FD – Trim set only. – Full dummy.
TS-HP1512IML-HD – Trim set only. – Half dummy.
11 1
/2"
3 1/2" 3 1/2"
3 1/
2"
3 1/
2"
2 1/
4"
2 1/
4" 11 1
/2"
3 1/2" 3 1/2"
3 1/
2"
3 1/
2"
11 1
/2"
3 1/2" 3 1/2"
3 1/
2"
3 1/
2"
11 1
/2"
3 1/2"
3 1/
2"
1/4"
1/4"
1/4"
1/4"
CS-HP1512IML Passage set. P-HP1512 (ext) P-HP1512 (int)CS-HP1512IML-PR Privacy set. P-HP1512IML-ERC (ext) P-HP1512IML-TPC (int)TS-HP1512IML-FD Full dummy. P-HP1512D (ext) P-HP1512D (int)TS-HP1512IML-HD Half dummy. P-HP1512D
CS-HP1512-8IML Passage set. P-HP1512 (ext) P-HP1512 (int)CS-HP1512-8IML-PR Privacy set. P-HP1512-8IML-ERC (ext) P-HP1512-8IML-TPC (int)
TS-HP1512IML Passage set. P-HP1512 (ext) P-HP1512 (int)TS-HP1512IML-PR Privacy set. P-HP1512IML-ERC (ext) P-HP1512IML-TPC (int)TS-HP1512IML-FD Full dummy. P-HP1512D (ext) P-HP1512D (int)TS-HP1512IML-HD Half dummy. P-HP1512D
TS-HP1512-8IML Passage set. P-HP1512 (ext) P-HP1512 (int)TS-HP1512-8IML-PR Privacy set. P-HP1512-8IML-ERC (ext) P-HP1512-8IML-TPC (int)
Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m
PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.
14-200
Revised 02/08/16
Illustrations are for demonstration purposes only. Any knob, lever or ring pull can be combined with any style or size escutcheon plate.
F-HP1512 HAND PEENED INTERIOR MORTISE LOCK PASSAGE & PRIVACY SETS
Complete sets with interior mortise lock and spindle. 2 1/4” center-to-center. (Shown)
Trim sets for interior mortise locks with spindle, no lock included. 2 1/4” center-to-center. (Shown)
2 1/2” or 2 3/4” backset standard.Custom backsets available. Call for options and pricing.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.Hand peened orders do NOT qualify for return and are non-refundable.
Complete sets with interior mortise lock and spindle. 2 7/8” center-to-center.
Trim sets for interior mortise locks with spindle, no lock included. 2 7/8” center-to-center.
Specify manufacturer & function of interior mortise lock.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.Hand peened orders do NOT qualify for return and are non-refundable.
CS-F-HP1512IML – Complete passage set with interior
mortise lock and spindle. OR TS-F-HP1512IML – Trim set only. No lock.
CS-F-HP1512IML-PR – Complete privacy set with interior
mortise lock and spindle. OR TS-F-HP1512IML-PR – Trim set only. No lock.
TS-F-HP1512IML-FD – Trim set only. – Full dummy.
TS-F-HP1512IML-HD – Trim set only. – Half dummy.
11 1
/2"
3 1/2" 3 1/2"
8" 8"
2 1/
4"
11 1
/2"
3 1/2" 3 1/2"
8"
11 1
/2"
3 1/2" 3 1/2"
8" 8"
11 1
/2"
3 1/2"
8"
1/4"
1/4"
1/4"
1/4"
CS-F-HP1512IML Passage set. P-F-HP1512 (ext) P-F-HP1512 (int)CS-F-HP1512IML-PR Privacy set. P-F-HP1512IML-ERC (ext) P-F-HP1512IML-TPC (int)TS-F-HP1512IML-FD Full dummy. P-F-HP1512D (ext) P-F-HP1512D (int)TS-F-HP1512IML-HD Half dummy. P-F-HP1512D
CS-F-HP1512-8IML Passage set. P-F-HP1512 (ext) P-F-HP1512 (int)CS-F-HP1512-8IML-PR Privacy set. P-F-HP1512-8IML-ERC (ext) P-F-HP1512-8IML-TPC (int)
TS-F-HP1512IML Passage set. P-F-HP1512 (ext) P-F-HP1512 (int)TS-F-HP1512IML-PR Privacy set. P-F-HP1512IML-ERC (ext) P-F-HP1512IML-TPC (int)TS-F-HP1512IML-FD Full dummy. P-F-HP1512D (ext) P-F-HP1512D (int)TS-F-HP1512IML-HD Half dummy. P-F-HP1512D
TS-F-HP1512-8IML Passage set. P-F-HP1512 (ext) P-F-HP1512 (int)TS-F-HP1512-8IML-PR Privacy set. P-F-HP1512-8IML-ERC (ext) P-F-HP1512-8IML-TPC (int)
Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m
PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.
14-201
Revised 02/08/16
Illustrations are for demonstration purposes only. Any knob, lever or ring pull can be combined with any style or size escutcheon plate.
Complete sets with interior mortise lock and spindle. 2 1/4” center-to-center. (Shown)
Trim sets for interior mortise locks with spindle, no lock included. 2 1/4” center-to-center. (Shown)
Complete sets with interior mortise lock and spindle. 2 7/8” center-to-center.
Trim sets for interior mortise locks with spindle, no lock included. 2 7/8” center-to-center.
2 1/2” or 2 3/4” backset standard.Custom backsets available. Call for options and pricing.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.UPCHARGE: A separate charge for wood or inlay knobs, levers or turn pieces applies. Refer to Sections 2 & 4.Inlay is available in S1/W1 finishes only.Inlay orders do NOT qualify for return and are non-refundable.
WH1610 HORIZONTAL WOOD INLAY INTERIOR MORTISE LOCK PASSAGE & PRIVACY SETS
CS-WH1610IML – Complete passage set with interior
mortise lock and spindle. OR TS-WH1610IML – Trim set only. No lock.
CS-WH1610IML-PR – Complete privacy set with interior
mortise lock and spindle. OR TS-WH1610IML-PR – Trim set only. No lock.
TS-WH1610IML-FD – Trim set only. – Full dummy.
TS-WH1610IML-HD – Trim set only. – Half dummy.
10"
2 1/2" 2 1/2"
10"
2 1/2" 2 1/2"
10"
2 1/2" 2 1/2"
10"
2 1/2"
3 1/
4"
3 1/
4"
3 1/
4"
3 1/
4"
3 1/
4"
3 1/
4"
2 1/
4"
3 1/
4"2
1/4"
1/4"
1/4"
1/4"
1/4"
Specify manufacturer & function of interior mortise lock.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.UPCHARGE: A separate charge for wood or inlay knobs, levers or turn pieces applies. Refer to Sections 2 & 4.Inlay is available in S1/W1 finishes only.Inlay orders do NOT qualify for return and are non-refundable.
CS-WH1610IML Passage set. P-WH1610 (ext) P-WH1610 (int)CS-WH1610IML-PR Privacy set. P-WH1610IML-ERC (ext) P-WH1610IML-TPC (int)TS-WH1610IML-FD Full dummy. P-WH1610D (ext) P-WH1610D (int)TS-WH1610IML-HD Half dummy. P-WH1610D
CS-WH1610-8IML Passage set. P-WH1610 (ext) P-WH1610 (int)CS-WH1610-8IML-PR Privacy set. P-WH1610-8IML-ERC (ext) P-WH1610-8IML-TPC (int)
TS-WH1610IML Passage set. P-WH1610 (ext) P-WH1610 (int)TS-WH1610IML-PR Privacy set. P-WH1610IML-ERC (ext) P-WH1610IML-TPC (int)TS-WH1610IML-FD Full dummy. P-WH1610D (ext) P-WH1610D (int)TS-WH1610IML-HD Half dummy. P-WH1610D
TS-WH1610-8IML Passage set. P-WH1610 (ext) P-WH1610 (int)TS-WH1610-8IML-PR Privacy set. P-WH1610-8IML-ERC (ext) P-WH1610-8IML-TPC (int)
Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m
PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.
14-202
Revised 02/08/16
Illustrations are for demonstration purposes only. Any knob, lever or ring pull can be combined with any style or size escutcheon plate.
Complete sets with interior mortise lock and spindle. 2 1/4” center-to-center. (Shown)
Trim sets for interior mortise locks with spindle, no lock included. 2 1/4” center-to-center. (Shown)
Complete sets with interior mortise lock and spindle. 2 7/8” center-to-center.
Trim sets for interior mortise locks with spindle, no lock included. 2 7/8” center-to-center.
2 1/2” or 2 3/4” backset standard.Custom backsets available. Call for options and pricing.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.UPCHARGE: A separate charge for wood or inlay knobs, levers or turn pieces applies. Refer to Sections 2 & 4.Inlay is available in S1/W1 finishes only.Inlay orders do NOT qualify for return and are non-refundable.
F-WH1610 HORIZONTAL WOOD INLAY INTERIOR MORTISE LOCK PASSAGE & PRIVACY SETS
CS-F-WH1610IML – Complete passage set with interior
mortise lock and spindle. OR TS-F-WH1610IML – Trim set only. No lock.
CS-F-WH1610IML-PR – Complete privacy set with interior
mortise lock and spindle. OR TS-F-WH1610IML-PR – Trim set only. No lock.
TS-F-WH1610IML-FD – Trim set only. – Full dummy.
TS-F-WH1610IML-HD – Trim set only. – Half dummy.
10"
2 1/2" 2 1/2"
10"
2 1/2" 2 1/2"
10"
2 1/2" 2 1/2"
10"
2 1/2"
6 3/
4"
6 3/
4"
6 3/
4"
6 3/
4"
6 3/
4"
6 3/
4"
2 1/
4"
1/4"
1/4"
1/4"
1/4"
Specify manufacturer & function of interior mortise lock.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.UPCHARGE: A separate charge for wood or inlay knobs, levers or turn pieces applies. Refer to Sections 2 & 4.Inlay is available in S1/W1 finishes only.Inlay orders do NOT qualify for return and are non-refundable.
CS-F-WH1610IML Passage set. P-F-WH1610 (ext) P-F-WH1610 (int)CS-F-WH1610IML-PR Privacy set. P-F-WH1610IML-ERC (ext) P-F-WH1610IML-TPC (int)TS-F-WH1610IML-FD Full dummy. P-F-WH1610D (ext) P-F-WH1610D (int)TS-F-WH1610IML-HD Half dummy. P-F-WH1610D
CS-F-WH1610-8IML Passage set. P-F-WH1610 (ext) P-F-WH1610 (int)CS-F-WH1610-8IML-PR Privacy set. P-F-WH1610-8IML-ERC (ext) P-F-WH1610-8IML-TPC (int)
TS-F-WH1610IML Passage set. P-F-WH1610 (ext) P-F-WH1610 (int)TS-F-WH1610IML-PR Privacy set. P-F-WH1610IML-ERC (ext) P-F-WH1610IML-TPC (int)TS-F-WH1610IML-FD Full dummy. P-F-WH1610D (ext) P-F-WH1610D (int)TS-F-WH1610IML-HD Half dummy. P-F-WH1610D
TS-F-WH1610-8IML Passage set. P-F-WH1610 (ext) P-F-WH1610 (int)TS-F-WH1610-8IML-PR Privacy set. P-F-WH1610-8IML-ERC (ext) P-F-WH1610-8IML-TPC (int)
Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m
PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.
14-203
Revised 02/08/16
Illustrations are for demonstration purposes only. Any knob, lever or ring pull can be combined with any style or size escutcheon plate.
Complete sets with interior mortise lock and spindle. 2 1/4” center-to-center. (Shown)
Trim sets for interior mortise locks with spindle, no lock included. 2 1/4” center-to-center. (Shown)
Complete sets with interior mortise lock and spindle. 2 7/8” center-to-center.
Trim sets for interior mortise locks with spindle, no lock included. 2 7/8” center-to-center.
2 1/2” or 2 3/4” backset standard.Custom backsets available. Call for options and pricing.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.UPCHARGE: A separate charge for wood or inlay knobs, levers or turn pieces applies. Refer to Sections 2 & 4.Inlay is available in S1/W1 finishes only.Inlay orders do NOT qualify for return and are non-refundable.
WV1610 VERTICAL WOOD INLAY INTERIOR MORTISE LOCK PASSAGE & PRIVACY SETS
CS-WV1610IML – Complete passage set with interior
mortise lock and spindle. OR TS-WV1610IML – Trim set only. No lock.
CS-WV1610IML-PR – Complete privacy set with interior
mortise lock and spindle. OR TS-WV1610IML-PR – Trim set only. No lock.
TS-WV1610IML-FD – Trim set only. – Full dummy.
TS-WV1610IML-HD – Trim set only. – Half dummy.
10"
2 1/2" 2 1/2"
10"
2 1/2" 2 1/2"
10"
2 1/2" 2 1/2"
10"
2 1/2"
3 1/
4"
3 1/
4"
3 1/
4"
3 1/
4"
3 1/
4"
3 1/
4"
2 1/
4"
3 1/
4"2
1/4"
1/4" 1/4" 1/4" 1/4"
Specify manufacturer & function of interior mortise lock.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.UPCHARGE: A separate charge for wood or inlay knobs, levers or turn pieces applies. Refer to Sections 2 & 4.Inlay is available in S1/W1 finishes only.Inlay orders do NOT qualify for return and are non-refundable.
CS-WV1610IML Passage set. P-WV1610 (ext) P-WV1610 (int)CS-WV1610IML-PR Privacy set. P-WV1610IML-ERC (ext) P-WV1610IML-TPC (int)TS-WV1610IML-FD Full dummy. P-WV1610D (ext) P-WV1610D (int)TS-WV1610IML-HD Half dummy. P-WV1610D
CS-WV1610-8IML Passage set. P-WV1610 (ext) P-WV1610 (int)CS-WV1610-8IML-PR Privacy set. P-WV1610-8IML-ERC (ext) P-WV1610-8IML-TPC (int)
TS-WV1610IML Passage set. P-WV1610 (ext) P-WV1610 (int)TS-WV1610IML-PR Privacy set. P-WV1610IML-ERC (ext) P-WV1610IML-TPC (int)TS-WV1610IML-FD Full dummy. P-WV1610D (ext) P-WV1610D (int)TS-WV1610IML-HD Half dummy. P-WV1610D
TS-WV1610-8IML Passage set. P-WV1610 (ext) P-WV1610 (int)TS-WV1610-8IML-PR Privacy set. P-WV1610-8IML-ERC (ext) P-WV1610-8IML-TPC (int)
Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m
PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.
14-204
Revised 02/08/16
Illustrations are for demonstration purposes only. Any knob, lever or ring pull can be combined with any style or size escutcheon plate.
Complete sets with interior mortise lock and spindle. 2 1/4” center-to-center. (Shown)
Trim sets for interior mortise locks with spindle, no lock included. 2 1/4” center-to-center. (Shown)
Complete sets with interior mortise lock and spindle. 2 7/8” center-to-center.
Trim sets for interior mortise locks with spindle, no lock included. 2 7/8” center-to-center.
2 1/2” or 2 3/4” backset standard.Custom backsets available. Call for options and pricing.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.UPCHARGE: A separate charge for wood or inlay knobs, levers or turn pieces applies. Refer to Sections 2 & 4.Inlay is available in S1/W1 finishes only.Inlay orders do NOT qualify for return and are non-refundable.
F-WV1610 VERTICAL WOOD INLAY INTERIOR MORTISE LOCK PASSAGE & PRIVACY SETS
CS-F-WV1610IML – Complete passage set with interior
mortise lock and spindle. OR TS-F-WV1610IML – Trim set only. No lock.
CS-F-WV1610IML-PR – Complete privacy set with interior
mortise lock and spindle. OR TS-F-WV1610IML-PR – Trim set only. No lock.
TS-F-WV1610IML-FD – Trim set only. – Full dummy.
TS-F-WV1610IML-HD – Trim set only. – Half dummy.
10"
2 1/2" 2 1/2"
10"
2 1/2" 2 1/2"
10"
2 1/2" 2 1/2"
10"
2 1/2"
6 3/
4"
6 3/
4"
6 3/
4"
6 3/
4"
6 3/
4"
6 3/
4"
2 1/
4"
1/4" 1/4" 1/4" 1/4"
Specify manufacturer & function of interior mortise lock.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.UPCHARGE: A separate charge for wood or inlay knobs, levers or turn pieces applies. Refer to Sections 2 & 4.Inlay is available in S1/W1 finishes only.Inlay orders do NOT qualify for return and are non-refundable.
CS-F-WV1610IML Passage set. P-F-WV1610 (ext) P-F-WV1610 (int)CS-F-WV1610IML-PR Privacy set. P-F-WV1610IML-ERC (ext) P-F-WV1610IML-TPC (int)TS-F-WV1610IML-FD Full dummy. P-F-WV1610D (ext) P-F-WV1610D (int)TS-F-WV1610IML-HD Half dummy. P-F-WV1610D
CS-F-WV1610-8IML Passage set. P-F-WV1610 (ext) P-F-WV1610 (int)CS-F-WV1610-8IML-PR Privacy set. P-F-WV1610-8IML-ERC (ext) P-F-WV1610-8IML-TPC (int)
TS-F-WV1610IML Passage set. P-F-WV1610 (ext) P-F-WV1610 (int)TS-F-WV1610IML-PR Privacy set. P-F-WV1610IML-ERC (ext) P-F-WV1610IML-TPC (int)TS-F-WV1610IML-FD Full dummy. P-F-WV1610D (ext) P-F-WV1610D (int)TS-F-WV1610IML-HD Half dummy. P-F-WV1610D
TS-F-WV1610-8IML Passage set. P-F-WV1610 (ext) P-F-WV1610 (int)TS-F-WV1610-8IML-PR Privacy set. P-F-WV1610-8IML-ERC (ext) P-F-WV1610-8IML-TPC (int)
Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m
PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.
14-205
Revised 02/08/16
Illustrations are for demonstration purposes only. Any knob, lever or ring pull can be combined with any style or size escutcheon plate.
Complete sets with interior mortise lock and spindle. 2 7/8” center-to-center.
Trim sets for interior mortise locks with spindle, no lock included. 2 7/8” center-to-center.
Specify manufacturer & function of interior mortise lock.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.* Available in 2 7/8” center-to-center ONLY.
2 1/2” or 2 3/4” backset standard.Custom backsets available. Call for options and pricing.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.* Available in 2 7/8” center-to-center ONLY.
1711 CIRCLES INTERIOR MORTISE LOCK PASSAGE & PRIVACY SETS
CS-1711-8IML – Complete passage set with interior
mortise lock and spindle. OR TS-1711-8IML – Trim set only. No lock.
CS-1711-8IML-PR – Complete privacy set with interior
mortise lock and spindle. OR TS-1711-8IML-PR – Trim set only. No lock.
TS-1711IML-FD – Trim set only. – Full dummy.
TS-1711IML-HD – Trim set only. – Half dummy.
11 1
/8"
2 1/2" 2 1/2"
11 1
/8"
2 1/2" 2 1/2"
11 1
/8"
2 1/2" 2 1/2"
11 1
/8"
2 1/2"
4 1/
16"
4 1/
16"
4 1/
16"
4 1/
16"
4 1/
16"
4 1/
16"
2 7/
8"
4 1/
16"
2 7/
8"
CS-1711-8IML Passage set. P-1711 (ext) P-1711 (int)
CS-1711-8IML-PR Privacy set. P-1711-8IML-ERC (ext) P-1711-8IML-TPC (int)
TS-1711IML-FD Full dummy. P-1711D (ext) P-1711D (int)
TS-1711IML-HD Half dummy. P-1711D
TS-1711-8IML Passage set. P-1711 (ext) P-1711 (int)
TS-1711-8IML-PR Privacy set. P-1711-8IML-ERC (ext) P-1711-8IML-TPC (int)
TS-1711IML-FD Full dummy. P-1711D (ext) P-1711D (int)
TS-1711IML-HD Half dummy. P-1711D
Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m
PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.
14-206
Revised 02/08/16
Illustrations are for demonstration purposes only. Any knob, lever or ring pull can be combined with any style or size escutcheon plate.
Complete sets with interior mortise lock and spindle. 2 7/8” center-to-center.
Trim sets for interior mortise locks with spindle, no lock included. 2 7/8” center-to-center.
Specify manufacturer & function of interior mortise lock.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.* Available in 2 7/8” center-to-center ONLY.
2 1/2” or 2 3/4” backset standard.Custom backsets available. Call for options and pricing.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.* Available in 2 7/8” center-to-center ONLY.
F1711 CIRCLES INTERIOR MORTISE LOCK PASSAGE & PRIVACY SETS
CS-F1711-8IML – Complete passage set with interior
mortise lock and spindle. OR TS-F1711-8IML – Trim set only. No lock.
CS-F1711-8IML-PR – Complete privacy set with interior
mortise lock and spindle. OR TS-F1711-8IML-PR – Trim set only. No lock.
TS-F1711IML-FD – Trim set only. – Full dummy.
TS-F1711IML-HD – Trim set only. – Half dummy.
11 1
/8"
2 1/2" 2 1/2"
11 1
/8"
2 1/2" 2 1/2"
11 1
/8"
2 1/2" 2 1/2"
11 1
/8"
2 1/2"
7 1/
16"
7 1/
16"
7 1/
16"
7 1/
16"
7 1/
16"
7 1/
16" 2
7/8"
CS-F1711-8IML Passage set. P-F1711 (ext) P-F1711 (int)
CS-F1711-8IML-PR Privacy set. P-F1711-8IML-ERC (ext) P-F1711-8IML-TPC (int)
TS-F1711IML-FD Full dummy. P-F1711D (ext) P-F1711D (int)
TS-F1711IML-HD Half dummy. P-F1711D
TS-F1711-8IML Passage set. P-F1711 (ext) P-F1711 (int)
TS-F1711-8IML-PR Privacy set. P-F1711-8IML-ERC (ext) P-F1711-8IML-TPC (int)
TS-F1711IML-FD Full dummy. P-F1711D (ext) P-F1711D (int)
TS-F1711IML-HD Half dummy. P-F1711D
Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m
PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.
14-207
Revised 02/08/16
Illustrations are for demonstration purposes only. Any knob, lever or ring pull can be combined with any style or size escutcheon plate.
Complete sets with interior mortise lock and spindle. 2 7/8” center-to-center.
Trim sets for interior mortise locks with spindle, no lock included. 2 7/8” center-to-center.
Specify manufacturer & function of interior mortise lock.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.* Available in 2 7/8” center-to-center ONLY.
2 1/2” or 2 3/4” backset standard.Custom backsets available. Call for options and pricing.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.* Available in 2 7/8” center-to-center ONLY.
1811 SQUARES INTERIOR MORTISE LOCK PASSAGE & PRIVACY SETS
CS-1811-8IML – Complete passage set with interior
mortise lock and spindle. OR TS-1811-8IML – Trim set only. No lock.
CS-1811-8IML-PR – Complete privacy set with interior
mortise lock and spindle. OR TS-1811-8IML-PR – Trim set only. No lock.
TS-1811IML-FD – Trim set only. – Full dummy.
TS-1811IML-HD – Trim set only. – Half dummy.
11 3
/4"
2 1/2" 2 1/2"
11 3
/4"
2 1/2" 2 1/2"
11 3
/4"
2 1/2" 2 1/2"
11 3
/4"
2 1/2"
4 3/
8"
4 3/
8"
4 3/
8"
4 3/
8"
4 3/
8"
4 3/
8"
2 7/
8"
4 3/
8"2
7/8"
CS-1811-8IML Passage set. P-1811 (ext) P-1811 (int)
CS-1811-8IML-PR Privacy set. P-1811-8IML-ERC (ext) P-1811-8IML-TPC (int)
TS-1811IML-FD Full dummy. P-1811D (ext) P-1811D (int)
TS-1811IML-HD Half dummy. P-1811D
TS-1811-8IML Passage set. P-1811 (ext) P-1811 (int)
TS-1811-8IML-PR Privacy set. P-1811-8IML-ERC (ext) P-1811-8IML-TPC (int)
TS-1811IML-FD Full dummy. P-1811D (ext) P-1811D (int)
TS-1811IML-HD Half dummy. P-1811D
Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m
PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.
14-208
Revised 02/08/16
Illustrations are for demonstration purposes only. Any knob, lever or ring pull can be combined with any style or size escutcheon plate.
Complete sets with interior mortise lock and spindle. 2 7/8” center-to-center.
Trim sets for interior mortise locks with spindle, no lock included. 2 7/8” center-to-center.
Specify manufacturer & function of interior mortise lock.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.* Available in 2 7/8” center-to-center ONLY.
2 1/2” or 2 3/4” backset standard.Custom backsets available. Call for options and pricing.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.* Available in 2 7/8” center-to-center ONLY.
F1811 SQUARES INTERIOR MORTISE LOCK PASSAGE & PRIVACY SETS
CS-F1811-8IML – Complete passage set with interior
mortise lock and spindle. OR TS-F1811-8IML – Trim set only. No lock.
CS-F1811-8IML-PR – Complete privacy set with interior
mortise lock and spindle. OR TS-F1811-8IML-PR – Trim set only. No lock.
TS-F1811IML-FD – Trim set only. – Full dummy.
TS-F1811IML-HD – Trim set only. – Half dummy.
11 3
/4"
2 1/2" 2 1/2"
11 3
/4"
2 1/2" 2 1/2"
11 3
/4"
2 1/2" 2 1/2"
11 3
/4"
2 1/2"
7 3/
8"
7 3/
8"
7 3/
8"
7 3/
8"
7 3/
8"
7 3/
8"
2 7/
8"
CS-F1811-8IML Passage set. P-F1811 (ext) P-F1811 (int)
CS-F1811-8IML-PR Privacy set. P-F1811-8IML-ERC (ext) P-F1811-8IML-TPC (int)
TS-F1811IML-FD Full dummy. P-F1811D (ext) P-F1811D (int)
TS-F1811IML-HD Half dummy. P-F1811D
TS-F1811-8IML Passage set. P-F1811 (ext) P-F1811 (int)
TS-F1811IML-PR Privacy set. P-F1811-8IML-ERC (ext) P-F1811-8IML-TPC (int)
TS-F1811IML-FD Full dummy. P-F1811D (ext) P-F1811D (int)
TS-F1811IML-HD Half dummy. P-F1811D
Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m
PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.
14-209
Revised 02/08/16
Illustrations are for demonstration purposes only. Any knob, lever or ring pull can be combined with any style or size escutcheon plate.
Complete sets with interior mortise lock and spindle. 2 1/4” center-to-center.
Trim sets for interior mortise locks with spindle, no lock included. 2 1/4” center-to-center.
2 1/2” or 2 3/4” backset standard.Custom backsets available. Call for options and pricing.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.
1906 CORDUROY INTERIOR MORTISE LOCK PASSAGE & PRIVACY SETS
CS-1906IML – Complete passage set with interior
mortise lock and spindle. OR TS-1906IML – Trim set only. No lock.
CS-1906IML-PR – Complete privacy set with interior
mortise lock and spindle. OR TS-1906IML-PR – Trim set only. No lock.
TS-1906IML-FD – Trim set only. – Full dummy.
TS-1906IML-HD – Trim set only. – Half dummy.
6"2 1/2" 2 1/2"
2" 2" 2"2
1/4"
2"2
1/4"
2 1/2" 2 1/2" 2 1/2" 2 1/2" 2 1/2"
6" 6" 6"
2" 2" 2"
Specify manufacturer & function of interior mortise lock.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.
CS-1906IML Passage set. P-1906OH (ext) P-1906OH (int)
CS-1906IML-PR Privacy set. P-1906OH-IML-ERC (ext) P-1906OH-IML-TPC (int)
TS-1906IML-FD Full dummy. P-1906OH-D (ext) P-1906OH-D (int)
TS-1906IML-HD Half dummy. P-1906OH-D
TS-1906IML Passage set. P-1906OH (ext) P-1906OH (int)
TS-1906IML-PR Privacy set. P-1906OH-IML-ERC (ext) P-1906OH-IML-TPC (int)
TS-1906IML-FD Full dummy. P-1906OH-D (ext) P-1906OH-D (int)
TS-1906IML-HD Half dummy. P-1906OH-D
Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m
PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.
14-210
Revised 02/08/16
Illustrations are for demonstration purposes only. Any knob, lever or ring pull can be combined with any style or size escutcheon plate.
Complete sets with interior mortise lock and spindle. 2 1/4” center-to-center.
Trim sets for interior mortise locks with spindle, no lock included. 2 1/4” center-to-center.
2 1/2” or 2 3/4” backset standard.Custom backsets available. Call for options and pricing.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.
F1906 CORDUROY INTERIOR MORTISE LOCK PASSAGE & PRIVACY SETS
CS-F1906IML – Complete passage set with interior
mortise lock and spindle. OR TS-F1906IML – Trim set only. No lock.
CS-F1906IML-PR – Complete privacy set with interior
mortise lock and spindle. OR TS-F1906IML-PR – Trim set only. No lock.
TS-F1906IML-FD – Trim set only. – Full dummy.
TS-F1906IML-HD – Trim set only. – Half dummy.
6"2 1/2" 2 1/2"
4" 4" 2 1/
4"
4"
2 1/2" 2 1/2" 2 1/2" 2 1/2" 2 1/2"
6" 6" 6"
4" 4" 4"
Specify manufacturer & function of interior mortise lock.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.
CS-F1906IML Passage set. P-F1906OH (ext) P-F1906OH (int)
CS-F1906IML-PR Privacy set. P-F1906OH-IML-ERC (ext) P-F1906OH-IML-TPC (int)
TS-F1906IML-FD Full dummy. P-F1906OH-D (ext) P-F1906OH-D (int)
TS-F1906IML-HD Half dummy. P-F1906OH-D
TS-F1906IML Passage set. P-F1906OH (ext) P-F1906OH (int)
TS-F1906IML-PR Privacy set. P-F1906OH-IML-ERC (ext) P-F1906OH-IML-TPC (int)
TS-F1906IML-FD Full dummy. P-F1906OH-D (ext) P-F1906OH-D (int)
TS-F1906IML-HD Half dummy. P-F1906OH-D
Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m
PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.
14-211
Revised 02/08/16
Illustrations are for demonstration purposes only. Any knob, lever or ring pull can be combined with any style or size escutcheon plate.
Complete sets with interior mortise lock and spindle. 2 1/4” center-to-center. (Shown)
Trim sets for interior mortise locks with spindle, no lock included. 2 1/4” center-to-center. (Shown)
Complete sets with interior mortise lock and spindle. 2 7/8” center-to-center.
Trim sets for interior mortise locks with spindle, no lock included. 2 7/8” center-to-center.
2 1/2” or 2 3/4” backset standard.Custom backsets available. Call for options and pricing.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.
1908 CORDUROY INTERIOR MORTISE LOCK PASSAGE & PRIVACY SETS
8 3/
4"
2 1/2" 2 1/2"
CS-1908IML – Complete passage set with interior
mortise lock and spindle. OR TS-1908IML – Trim set only. No lock.
CS-1908IML-PR – Complete privacy set with interior
mortise lock and spindle. OR TS-1908IML-PR – Trim set only. No lock.
TS-1908IML-FD – Trim set only. – Full dummy.
TS-1908IML-HD – Trim set only. – Half dummy.
8 3/
4"
2 1/2" 2 1/2"
8 3/
4"
2 1/2" 2 1/2"
8 3/
4"
2 1/2"
2 1/
2"
2 1/
2"
2 1/
2"
2 1/
2"
2 1/
2"
2 1/
2"
2 1/
4"
2 1/
2"2
1/4"
Specify manufacturer & function of interior mortise lock.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.
CS-1908IML Passage set. P-1908 (ext) P-1908 (int)CS-1908IML-PR Privacy set. P-1908IML-ERC (ext) P-1908IML-TPC (int)TS-1908IML-FD Full dummy. P-1908D (ext) P-1908D (int)TS-1908IML-HD Half dummy. P-1908D
CS-1908-8IML Passage set. P-1908 (ext) P-1908 (int)CS-1908-8IML-PR Privacy set. P-1908-8IML-ERC (ext) P-1908-8IML-TPC (int)
TS-1908IML Passage set. P-1908 (ext) P-1908 (int)TS-1908IML-PR Privacy set. P-1908IML-ERC (ext) P-1908IML-TPC (int)TS-1908IML-FD Full dummy. P-1908D (ext) P-1908D (int)TS-1908IML-HD Half dummy. P-1908D
TS-1908-8IML Passage set. P-1908 (ext) P-1908 (int)TS-1908-8IML-PR Privacy set. P-1908-8IML-ERC (ext) P-1908-8IML-TPC (int)
Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m
PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.
14-212
Revised 02/08/16
Illustrations are for demonstration purposes only. Any knob, lever or ring pull can be combined with any style or size escutcheon plate.
Complete sets with interior mortise lock and spindle. 2 1/4” center-to-center. (Shown)
Trim sets for interior mortise locks with spindle, no lock included. 2 1/4” center-to-center. (Shown)
Complete sets with interior mortise lock and spindle. 2 7/8” center-to-center.
Trim sets for interior mortise locks with spindle, no lock included. 2 7/8” center-to-center.
2 1/2” or 2 3/4” backset standard.Custom backsets available. Call for options and pricing.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.
F1908 CORDUROY INTERIOR MORTISE LOCK PASSAGE & PRIVACY SETS
8 3/
4"
2 1/2" 2 1/2"
CS-F1908IML – Complete passage set with interior
mortise lock and spindle. OR TS-F1908IML – Trim set only. No lock.
CS-F1908IML-PR – Complete privacy set with interior
mortise lock and spindle. OR TS-F1908IML-PR – Trim set only. No lock.
TS-F1908IML-FD – Trim set only. – Full dummy.
TS-F1908IML-HD – Trim set only. – Half dummy.
8 3/
4"
2 1/2" 2 1/2"
8 3/
4"
2 1/2" 2 1/2"
8 3/
4"
2 1/2"
6"6" 6"6" 6"6"
2 1/
4"
Specify manufacturer & function of interior mortise lock.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.
CS-F1908IML Passage set. P-F1908 (ext) P-F1908 (int)CS-F1908IML-PR Privacy set. P-F1908IML-ERC (ext) P-F1908IML-TPC (int)TS-F1908IML-FD Full dummy. P-F1908D (ext) P-F1908D (int)TS-F1908IML-HD Half dummy. P-F1908D
CS-F1908-8IML Passage set. P-F1908 (ext) P-F1908 (int)CS-F1908-8IML-PR Privacy set. P-F1908-8IML-ERC (ext) P-F1908-8IML-TPC (int)
TS-F1908IML Passage set. P-F1908 (ext) P-F1908 (int)TS-F1908IML-PR Privacy set. P-F1908IML-ERC (ext) P-F1908IML-TPC (int)TS-F1908IML-FD Full dummy. P-F1908D (ext) P-F1908D (int)TS-F1908IML-HD Half dummy. P-F1908D
TS-F1908-8IML Passage set. P-F1908 (ext) P-F1908 (int)TS-F1908-8IML-PR Privacy set. P-F1908-8IML-ERC (ext) P-F1908-8IML-TPC (int)
Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m
PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.
14-213
Revised 02/08/16
Illustrations are for demonstration purposes only. Any knob, lever or ring pull can be combined with any style or size escutcheon plate.
Complete sets with interior mortise lock and spindle. 2 1/4” center-to-center. (Shown)
Trim sets for interior mortise locks with spindle, no lock included. 2 1/4” center-to-center. (Shown)
2 1/2” or 2 3/4” backset standard.Custom backsets available. Call for options and pricing.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.
Complete sets with interior mortise lock and spindle. 2 7/8” center-to-center.
Trim sets for interior mortise locks with spindle, no lock included. 2 7/8” center-to-center.
1910 CORDUROY INTERIOR MORTISE LOCK PASSAGE & PRIVACY SETS
CS-1910IML – Complete passage set with interior
mortise lock and spindle. OR TS-1910IML – Trim set only. No lock.
CS-1910IML-PR – Complete privacy set with interior
mortise lock and spindle. OR TS-1910IML-PR – Trim set only. No lock.
TS-1910IML-FD – Trim set only. – Full dummy.
TS-1910IML-HD – Trim set only. – Half dummy.
10"
2 1/2" 2 1/2"
3 1/
4"
3 1/
4"
3 1/
4"2
1/4"
3 1/
4"2
1/4" 10
"
2 1/2" 2 1/2"
10"
2 1/2" 2 1/2"
10"
2 1/2"
3 1/
4"
3 1/
4"
3 1/
4"
Specify manufacturer & function of interior mortise lock.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.
CS-1910IML Passage set. P-1910 (ext) P-1910 (int)CS-1910IML-PR Privacy set. P-1910IML-ERC (ext) P-1910IML-TPC (int)TS-1910IML-FD Full dummy. P-1910D (ext) P-1910D (int)TS-1910IML-HD Half dummy. P-1910D
CS-1910-8IML Passage set. P-1910 (ext) P-1910 (int)CS-1910-8IML-PR Privacy set. P-1910-8IML-ERC (ext) P-1910-8IML-TPC (int)
TS-1910IML Passage set. P-1910 (ext) P-1910 (int)TS-1910IML-PR Privacy set. P-1910IML-ERC (ext) P-1910IML-TPC (int)TS-1910IML-FD Full dummy. P-1910D (ext) P-1910D (int)TS-1910IML-HD Half dummy. P-1910D
TS-1910-8IML Passage set. P-1910 (ext) P-1910 (int)TS-1910-8IML-PR Privacy set. P-1910-8IML-ERC (ext) P-1910-8IML-TPC (int)
Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m
PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.
14-214
Revised 02/08/16
Illustrations are for demonstration purposes only. Any knob, lever or ring pull can be combined with any style or size escutcheon plate.
Complete sets with interior mortise lock and spindle. 2 1/4” center-to-center. (Shown)
Trim sets for interior mortise locks with spindle, no lock included. 2 1/4” center-to-center. (Shown)
2 1/2” or 2 3/4” backset standard.Custom backsets available. Call for options and pricing.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.
Complete sets with interior mortise lock and spindle. 2 7/8” center-to-center.
Trim sets for interior mortise locks with spindle, no lock included. 2 7/8” center-to-center.
F1910 CORDUROY INTERIOR MORTISE LOCK PASSAGE & PRIVACY SETS
CS-F1910IML – Complete passage set with interior
mortise lock and spindle. OR TS-F1910IML – Trim set only. No lock.
CS-F1910IML-PR – Complete privacy set with interior
mortise lock and spindle. OR TS-F1910IML-PR – Trim set only. No lock.
TS-F1910IML-FD – Trim set only. – Full dummy.
TS-F1910IML-HD – Trim set only. – Half dummy.
10"
2 1/2" 2 1/2"
6 3/
4"
6 3/
4"
2 1/
4"
6 3/
4"
10"
2 1/2" 2 1/2"
10"
2 1/2" 2 1/2"
10"
2 1/2"
6 3/
4"
6 3/
4"
6 3/
4"
Specify manufacturer & function of interior mortise lock.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.
CS-F1910IML Passage set. P-F1910 (ext) P-F1910 (int)CS-F1910IML-PR Privacy set. P-F1910IML-ERC (ext) P-F1910IML-TPC (int)TS-F1910IML-FD Full dummy. P-F1910D (ext) P-F1910D (int)TS-F1910IML-HD Half dummy. P-F1910D
CS-F1910-8IML Passage set. P-F1910 (ext) P-F1910 (int)CS-F1910-8IML-PR Privacy set. P-F1910-8IML-ERC (ext) P-F1910-8IML-TPC (int)
TS-F1910IML Passage set. P-F1910 (ext) P-F1910 (int)TS-F1910IML-PR Privacy set. P-F1910IML-ERC (ext) P-F1910IML-TPC (int)TS-F1910IML-FD Full dummy. P-F1910D (ext) P-F1910D (int)TS-F1910IML-HD Half dummy. P-F1910D
TS-F1910-8IML Passage set. P-F1910 (ext) P-F1910 (int)TS-F1910-8IML-PR Privacy set. P-F1910-8IML-ERC (ext) P-F1910-8IML-TPC (int)
Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m
PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.
14-215
Revised 02/08/16
Illustrations are for demonstration purposes only. Any knob, lever or ring pull can be combined with any style or size escutcheon plate.
Complete sets with interior mortise lock and spindle. 2 1/4” center-to-center. (Shown)
Trim sets for interior mortise locks with spindle, no lock included. 2 1/4” center-to-center. (Shown)
2 1/2” or 2 3/4” backset standard.Custom backsets available. Call for options and pricing.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.
Complete sets with interior mortise lock and spindle. 2 7/8” center-to-center.
Trim sets for interior mortise locks with spindle, no lock included. 2 7/8” center-to-center.
1912 CORDUROY INTERIOR MORTISE LOCK PASSAGE & PRIVACY SETS
CS-1912IML – Complete passage set with interior
mortise lock and spindle. OR TS-1912IML – Trim set only. No lock.
CS-1912IML-PR – Complete privacy set with interior
mortise lock and spindle. OR TS-1912IML-PR – Trim set only. No lock.
TS-1912IML-FD – Trim set only. – Full dummy.
TS-1912IML-HD – Trim set only. – Half dummy.
13"
3" 3"
4 3/
16"
4 3/
16"
2 1/
4"
2 1/
4" 13"
3" 3"
4 3/
16"
4 3/
16"
13"
3" 3"
4 3/
16"
4 3/
16"
13"
3"
4 3/
16"
Specify manufacturer & function of interior mortise lock.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.
CS-1912IML Passage set. P-1912 (ext) P-1912 (int)CS-1912IML-PR Privacy set. P-1912IML-ERC (ext) P-1912IML-TPC (int)TS-1912IML-FD Full dummy. P-1912D (ext) P-1912D (int)TS-1912IML-HD Half dummy. P-1912D
CS-1912-8IML Passage set. P-1912 (ext) P-1912 (int)CS-1912-8IML-PR Privacy set. P-1912-8IML-ERC (ext) P-1912-8IML-TPC (int)
TS-1912IML Passage set. P-1912 (ext) P-1912 (int)TS-1912IML-PR Privacy set. P-1912IML-ERC (ext) P-1912IML-TPC (int)TS-1912IML-FD Full dummy. P-1912D (ext) P-1912D (int)TS-1912IML-HD Half dummy. P-1912D
TS-1912-8IML Passage set. P-1912 (ext) P-1912 (int)TS-1912-8IML-PR Privacy set. P-1912-8IML-ERC (ext) P-1912-8IML-TPC (int)
Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m
PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.
14-216
Revised 02/08/16
Illustrations are for demonstration purposes only. Any knob, lever or ring pull can be combined with any style or size escutcheon plate.
Complete sets with interior mortise lock and spindle. 2 1/4” center-to-center. (Shown)
Trim sets for interior mortise locks with spindle, no lock included. 2 1/4” center-to-center. (Shown)
2 1/2” or 2 3/4” backset standard.Custom backsets available. Call for options and pricing.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.
Complete sets with interior mortise lock and spindle. 2 7/8” center-to-center.
Trim sets for interior mortise locks with spindle, no lock included. 2 7/8” center-to-center.
F1912 CORDUROY INTERIOR MORTISE LOCK PASSAGE & PRIVACY SETS
CS-F1912IML – Complete passage set with interior
mortise lock and spindle. OR TS-F1912IML – Trim set only. No lock.
CS-F1912IML-PR – Complete privacy set with interior
mortise lock and spindle. OR TS-F1912IML-PR – Trim set only. No lock.
TS-F1912IML-FD – Trim set only. – Full dummy.
TS-F1912IML-HD – Trim set only. – Half dummy.
13"
3" 3"
8 13
/16"
8 13
/16"
2 1/
4"
13"
3" 3"
8 13
/16"
13"
3" 3"
8 13
/16"
8 13
/16"
13"
3"
8 13
/16"
Specify manufacturer & function of interior mortise lock.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.
CS-F1912IML Passage set. P-F1912 (ext) P-F1912 (int)CS-F1912IML-PR Privacy set. P-F1912IML-ERC (ext) P-F1912IML-TPC (int)TS-F1912IML-FD Full dummy. P-F1912D (ext) P-F1912D (int)TS-F1912IML-HD Half dummy. P-F1912D
CS-F1912-8IML Passage set. P-F1912 (ext) P-F1912 (int)CS-F1912-8IML-PR Privacy set. P-F1912-8IML-ERC (ext) P-F1912-8IML-TPC (int)
TS-F1912IML Passage set. P-F1912 (ext) P-F1912 (int)TS-F1912IML-PR Privacy set. P-F1912IML-ERC (ext) P-F1912IML-TPC (int)TS-F1912IML-FD Full dummy. P-F1912D (ext) P-F1912D (int)TS-F1912IML-HD Half dummy. P-F1912D
TS-F1912-8IML Passage set. P-F1912 (ext) P-F1912 (int)TS-F1912-8IML-PR Privacy set. P-F1912-8IML-ERC (ext) P-F1912-8IML-TPC (int)
Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m
PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.
14-217
Revised 02/08/16
Illustrations are for demonstration purposes only. Any knob, lever or ring pull can be combined with any style or size escutcheon plate.
Complete sets with interior mortise lock and spindle. 2 1/4” center-to-center. (Shown)
Trim sets for interior mortise locks with spindle, no lock included. 2 1/4” center-to-center. (Shown)
2 1/2” or 2 3/4” backset standard.Custom backsets available. Call for options and pricing.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.
Complete sets with interior mortise lock and spindle. 2 7/8” center-to-center.
Trim sets for interior mortise locks with spindle, no lock included. 2 7/8” center-to-center.
1913 CORDUROY INTERIOR MORTISE LOCK PASSAGE & PRIVACY SETS
CS-1913IML – Complete passage set with interior
mortise lock and spindle. OR TS-1913IML – Trim set only. No lock.
CS-1913IML-PR – Complete privacy set with interior
mortise lock and spindle. OR TS-1913IML-PR – Trim set only. No lock.
TS-1913IML-FD – Trim set only. – Full dummy.
TS-1913IML-HD – Trim set only. – Half dummy.
13"
3 1/2" 3 1/2"
4 1/
2"
4 1/
2"
2 1/
4"
2 1/
4" 13"
3 1/2" 3 1/2"
4 1/
2"
4 1/
2"
13"
3 1/2" 3 1/2"
4 1/
2"
4 1/
2"
13"
3 1/2"
4 1/
2"
Specify manufacturer & function of interior mortise lock.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.
CS-1913IML Passage set. P-1913 (ext) P-1913 (int)CS-1913IML-PR Privacy set. P-1913IML-ERC (ext) P-1913IML-TPC (int)TS-1913IML-FD Full dummy. P-1913D (ext) P-1913D (int)TS-1913IML-HD Half dummy. P-1913D
CS-1913-8IML Passage set. P-1913 (ext) P-1913 (int)CS-1913-8IML-PR Privacy set. P-1913-8IML-ERC (ext) P-1913-8IML-TPC (int)
TS-1913IML Passage set. P-1913 (ext) P-1913 (int)TS-1913IML-PR Privacy set. P-1913IML-ERC (ext) P-1913IML-TPC (int)TS-1913IML-FD Full dummy. P-1913D (ext) P-1913D (int)TS-1913IML-HD Half dummy. P-1913D
TS-1913-8IML Passage set. P-1913 (ext) P-1913 (int)TS-1913-8IML-PR Privacy set. P-1913-8IML-ERC (ext) P-1913-8IML-TPC (int)
Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m
PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.
14-218
Revised 02/08/16
Illustrations are for demonstration purposes only. Any knob, lever or ring pull can be combined with any style or size escutcheon plate.
Complete sets with interior mortise lock and spindle. 2 1/4” center-to-center. (Shown)
Trim sets for interior mortise locks with spindle, no lock included. 2 1/4” center-to-center. (Shown)
2 1/2” or 2 3/4” backset standard.Custom backsets available. Call for options and pricing.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.
Complete sets with interior mortise lock and spindle. 2 7/8” center-to-center.
Trim sets for interior mortise locks with spindle, no lock included. 2 7/8” center-to-center.
F1913 CORDUROY INTERIOR MORTISE LOCK PASSAGE & PRIVACY SETS
CS-F1913IML – Complete passage set with interior
mortise lock and spindle. OR TS-F1913IML – Trim set only. No lock.
CS-F1913IML-PR – Complete privacy set with interior
mortise lock and spindle. OR TS-F1913IML-PR – Trim set only. No lock.
TS-F1913IML-FD – Trim set only. – Full dummy.
TS-F1913IML-HD – Trim set only. – Half dummy.
13"
3 1/2" 3 1/2"
8 1/
2"
8 1/
2"
2 1/
4"
13"
3 1/2" 3 1/2"
8 1/
2"
13"
3 1/2" 3 1/2"
8 1/
2"
8 1/
2"
13"
3 1/2"
8 1/
2"
Specify manufacturer & function of interior mortise lock.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.
CS-F1913IML Passage set. P-F1913 (ext) P-F1913 (int)CS-F1913IML-PR Privacy set. P-F1913IML-ERC (ext) P-F1913IML-TPC (int)TS-F1913IML-FD Full dummy. P-F1913D (ext) P-F1913D (int)TS-F1913IML-HD Half dummy. P-F1913D
CS-F1913-8IML Passage set. P-F1913 (ext) P-F1913 (int)CS-F1913-8IML-PR Privacy set. P-F1913-8IML-ERC (ext) P-F1913-8IML-TPC (int)
TS-F1913IML Passage set. P-F1913 (ext) P-F1913 (int)TS-F1913IML-PR Privacy set. P-F1913IML-ERC (ext) P-F1913IML-TPC (int)TS-F1913IML-FD Full dummy. P-F1913D (ext) P-F1913D (int)TS-F1913IML-HD Half dummy. P-F1913D
TS-F1913-8IML Passage set. P-F1913 (ext) P-F1913 (int)TS-F1913-8IML-PR Privacy set. P-F1913-8IML-ERC (ext) P-F1913-8IML-TPC (int)
Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m
PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.
14-219
Revised 02/08/16
Illustrations are for demonstration purposes only. Any knob, lever or ring pull can be combined with any style or size escutcheon plate.
Complete sets with interior mortise lock and spindle. 2 1/4” center-to-center.
Trim sets for interior mortise locks with spindle, no lock included. 2 1/4” center-to-center.
2 1/2” or 2 3/4” backset standard.Custom backsets available. Call for options and pricing.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.
2106 MESA INTERIOR MORTISE LOCK PASSAGE & PRIVACY SETS
CS-2106IML – Complete passage set with interior
mortise lock and spindle. OR TS-2106IML – Trim set only. No lock.
CS-2106IML-PR – Complete privacy set with interior
mortise lock and spindle. OR TS-2106IML-PR – Trim set only. No lock.
TS-2106IML-FD – Trim set only. – Full dummy.
TS-2106IML-HD – Trim set only. – Half dummy.
6"2 1/4" 2 1/4"
6"
2 1/4" 2 1/4"
6"
2 1/4" 2 1/4"
6"
2 1/4"
2 1/
4"
2 1/
4"
2 1/
4"
2 1/
4"
2 1/
4"
2 1/
4"
2 1/
4"
2 1/
4"2
1/4"
Specify manufacturer & function of interior mortise lock.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.
CS-2106IML Passage set. P-2106OH (ext) P-2106OH (int)
CS-2106IML-PR Privacy set. P-2106OH-IML-ERC (ext) P-2106OH-IML-TPC (int)
TS-2106IML-FD Full dummy. P-2106OH-D (ext) P-2106OH-D (int)
TS-2106IML-HD Half dummy. P-2106OH-D
TS-2106IML Passage set. P-2106OH (ext) P-2106OH (int)
TS-2106IML-PR Privacy set. P-2106OH-IML-ERC (ext) P-2106OH-IML-TPC (int)
TS-2106IML-FD Full dummy. P-2106OH-D (ext) P-2106OH-D (int)
TS-2106IML-HD Half dummy. P-2106OH-D
Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m
PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.
14-220
Revised 02/08/16
Illustrations are for demonstration purposes only. Any knob, lever or ring pull can be combined with any style or size escutcheon plate.
Complete sets with interior mortise lock and spindle. 2 1/4” center-to-center.
Trim sets for interior mortise locks with spindle, no lock included. 2 1/4” center-to-center.
2 1/2” or 2 3/4” backset standard.Custom backsets available. Call for options and pricing.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.
F2106 MESA INTERIOR MORTISE LOCK PASSAGE & PRIVACY SETS
CS-F2106IML – Complete passage set with interior
mortise lock and spindle. OR TS-F2106IML – Trim set only. No lock.
CS-F2106IML-PR – Complete privacy set with interior
mortise lock and spindle. OR TS-F2106IML-PR – Trim set only. No lock.
TS-F2106IML-FD – Trim set only. – Full dummy.
TS-F2106IML-HD – Trim set only. – Half dummy.
6"2 1/4" 2 1/4"
6"
2 1/4" 2 1/4"
6"
2 1/4" 2 1/4"
6"
2 1/4"
3 3/
4"
3 3/
4"
3 3/
4"
3 3/
4"
3 3/
4"
3 3/
4"
2 1/
4"
Specify manufacturer & function of interior mortise lock.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.
CS-F2106IML Passage set. P-F2106OH (ext) P-F2106OH (int)
CS-F2106IML-PR Privacy set. P-F2106OH-IML-ERC (ext) P-F2106OH-IML-TPC (int)
TS-F2106IML-FD Full dummy. P-F2106OH-D (ext) P-F2106OH-D (int)
TS-F2106IML-HD Half dummy. P-F2106OH-D
TS-F2106IML Passage set. P-F2106OH (ext) P-F2106OH (int)
TS-F2106IML-PR Privacy set. P-F2106OH-IML-ERC (ext) P-F2106OH-IML-TPC (int)
TS-F2106IML-FD Full dummy. P-F2106OH-D (ext) P-F2106OH-D (int)
TS-F2106IML-HD Half dummy. P-F2106OH-D
Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m
PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.
14-221
Revised 02/08/16
Illustrations are for demonstration purposes only. Any knob, lever or ring pull can be combined with any style or size escutcheon plate.
Complete sets with interior mortise lock and spindle. 2 1/4” center-to-center. (Shown)
Trim sets for interior mortise locks with spindle, no lock included. 2 1/4” center-to-center. (Shown)
2 1/2” or 2 3/4” backset standard.Custom backsets available. Call for options and pricing.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.
Complete sets with interior mortise lock and spindle. 2 7/8” center-to-center.
Trim sets for interior mortise locks with spindle, no lock included. 2 7/8” center-to-center.
2107 MESA INTERIOR MORTISE LOCK PASSAGE & PRIVACY SETS
CS-2107IML – Complete passage set with interior
mortise lock and spindle. OR TS-2107IML – Trim set only. No lock.
CS-2107IML-PR – Complete privacy set with interior
mortise lock and spindle. OR TS-2107IML-PR – Trim set only. No lock.
TS-2107IML-FD – Trim set only. – Full dummy.
TS-2107IML-HD – Trim set only. – Half dummy.
8 3/
4"
2" 2"
2 3/
4"
2 3/
4"
2 1/
4"
8 3/
4"
2" 2"
2 3/
4"
2 3/
4"
8 3/
4"
2" 2"
2 3/
4"
2 3/
4"
8 3/
4"
2"
2 3/
4"
2 1/
4"
Specify manufacturer & function of interior mortise lock.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.
CS-2107IML Passage set. P-2107 (ext) P-2107 (int)CS-2107IML-PR Privacy set. P-2107IML-ERC (ext) P-2107IML-TPC (int)TS-2107IML-FD Full dummy. P-2107D (ext) P-2107D (int)TS-2107IML-HD Half dummy. P-2107D
CS-2107-8IML Passage set. P-2107 (ext) P-2107 (int)CS-2107-8IML-PR Privacy set. P-2107-8IML-ERC (ext) P-2107-8IML-TPC (int)
TS-2107IML Passage set. P-2107 (ext) P-2107 (int)TS-2107IML-PR Privacy set. P-2107IML-ERC (ext) P-2107IML-TPC (int)TS-2107IML-FD Full dummy. P-2107D (ext) P-2107D (int)TS-2107IML-HD Half dummy. P-2107D
TS-2107-8IML Passage set. P-2107 (ext) P-2107 (int)TS-2107-8IML-PR Privacy set. P-2107-8IML-ERC (ext) P-2107-8IML-TPC (int)
Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m
PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.
14-222
Revised 02/08/16
Illustrations are for demonstration purposes only. Any knob, lever or ring pull can be combined with any style or size escutcheon plate.
Complete sets with interior mortise lock and spindle. 2 1/4” center-to-center. (Shown)
Trim sets for interior mortise locks with spindle, no lock included. 2 1/4” center-to-center. (Shown)
2 1/2” or 2 3/4” backset standard.Custom backsets available. Call for options and pricing.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.
Complete sets with interior mortise lock and spindle. 2 7/8” center-to-center.
Trim sets for interior mortise locks with spindle, no lock included. 2 7/8” center-to-center.
F2107 MESA INTERIOR MORTISE LOCK PASSAGE & PRIVACY SETS
CS-F2107IML – Complete passage set with interior
mortise lock and spindle. OR TS-F2107IML – Trim set only. No lock.
CS-F2107IML-PR – Complete privacy set with interior
mortise lock and spindle. OR TS-F2107IML-PR – Trim set only. No lock.
TS-F2107IML-FD – Trim set only. – Full dummy.
TS-F2107IML-HD – Trim set only. – Half dummy.
8 3/
4"
2" 2"
6" 6"
8 3/
4"
2" 2"
6"
8 3/
4"
2" 2"
6" 6"
8 3/
4"
2"
6"
2 1/
4"
Specify manufacturer & function of interior mortise lock.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.
CS-F2107IML Passage set. P-F2107 (ext) P-F2107 (int)CS-F2107IML-PR Privacy set. P-F2107IML-ERC (ext) P-F2107IML-TPC (int)TS-F2107IML-FD Full dummy. P-F2107D (ext) P-F2107D (int)TS-F2107IML-HD Half dummy. P-F2107D
CS-F2107-8IML Passage set. P-F2107 (ext) P-F2107 (int)CS-F2107-8IML-PR Privacy set. P-F2107-8IML-ERC (ext) P-F2107-8IML-TPC (int)
TS-F2107IML Passage set. P-F2107 (ext) P-F2107 (int)TS-F2107IML-PR Privacy set. P-F2107IML-ERC (ext) P-F2107IML-TPC (int)TS-F2107IML-FD Full dummy. P-F2107D (ext) P-F2107D (int)TS-F2107IML-HD Half dummy. P-F2107D
TS-F2107-8IML Passage set. P-F2107 (ext) P-F2107 (int)TS-F2107-8IML-PR Privacy set. P-F2107-8IML-ERC (ext) P-F2107-8IML-TPC (int)
Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m
PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.
14-223
Revised 02/08/16
Illustrations are for demonstration purposes only. Any knob, lever or ring pull can be combined with any style or size escutcheon plate.
Complete sets with interior mortise lock and spindle. 2 1/4” center-to-center. (Shown)
Trim sets for interior mortise locks with spindle, no lock included. 2 1/4” center-to-center. (Shown)
Complete sets with interior mortise lock and spindle. 2 7/8” center-to-center.
Trim sets for interior mortise locks with spindle, no lock included. 2 7/8” center-to-center.
2 1/2” or 2 3/4” backset standard.Custom backsets available. Call for options and pricing.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.
2108 MESA INTERIOR MORTISE LOCK PASSAGE & PRIVACY SETS
CS-2108IML – Complete passage set with interior
mortise lock and spindle. OR TS-2108IML – Trim set only. No lock.
CS-2108IML-PR – Complete privacy set with interior
mortise lock and spindle. OR TS-2108IML-PR – Trim set only. No lock.
TS-2108IML-FD – Trim set only. – Full dummy.
TS-2108IML-HD – Trim set only. – Half dummy.
8 3/
4"
2 1/4" 2 1/4"
8 3/
4"
2 1/4" 2 1/4"
8 3/
4"
2 1/4" 2 1/4"
8 3/
4"
2 1/4"
2 3/
4"
2 3/
4"
2 3/
4"
2 3/
4"
2 3/
4"
2 3/
4"
2 1/
4"
2 3/
4"2
1/4"
Specify manufacturer & function of interior mortise lock.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.
CS-2108IML Passage set. P-2108 (ext) P-2108 (int)CS-2108IML-PR Privacy set. P-2108IML-ERC (ext) P-2108IML-TPC (int)TS-2108IML-FD Full dummy. P-2108D (ext) P-2108D (int)TS-2108IML-HD Half dummy. P-2108D
CS-2108-8IML Passage set. P-2108 (ext) P-2108 (int)CS-2108-8IML-PR Privacy set. P-2108-8IML-ERC (ext) P-2108-8IML-TPC (int)
TS-2108IML Passage set. P-2108 (ext) P-2108 (int)TS-2108IML-PR Privacy set. P-2108IML-ERC (ext) P-2108IML-TPC (int)TS-2108IML-FD Full dummy. P-2108D (ext) P-2108D (int)TS-2108IML-HD Half dummy. P-2108D
TS-2108-8IML Passage set. P-2108 (ext) P-2108 (int)TS-2108-8IML-PR Privacy set. P-2108-8IML-ERC (ext) P-2108-8IML-TPC (int)
Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m
PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.
14-224
Revised 02/08/16
Illustrations are for demonstration purposes only. Any knob, lever or ring pull can be combined with any style or size escutcheon plate.
Complete sets with interior mortise lock and spindle. 2 1/4” center-to-center. (Shown)
Trim sets for interior mortise locks with spindle, no lock included. 2 1/4” center-to-center. (Shown)
Complete sets with interior mortise lock and spindle. 2 7/8” center-to-center.
Trim sets for interior mortise locks with spindle, no lock included. 2 7/8” center-to-center.
2 1/2” or 2 3/4” backset standard.Custom backsets available. Call for options and pricing.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.
F2108 MESA INTERIOR MORTISE LOCK PASSAGE & PRIVACY SETS
CS-F2108IML – Complete passage set with interior
mortise lock and spindle. OR TS-F2108IML – Trim set only. No lock.
CS-F2108IML-PR – Complete privacy set with interior
mortise lock and spindle. OR TS-F2108IML-PR – Trim set only. No lock.
TS-F2108IML-FD – Trim set only. – Full dummy.
TS-F2108IML-HD – Trim set only. – Half dummy.
8 3/
4"
2 1/4" 2 1/4"
8 3/
4"
2 1/4" 2 1/4"
8 3/
4"
2 1/4" 2 1/4"
8 3/
4"
2 1/4"
6"6" 6" 6"6" 6"
2 1/
4"
Specify manufacturer & function of interior mortise lock.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.
CS-F2108IML Passage set. P-F2108 (ext) P-F2108 (int)CS-F2108IML-PR Privacy set. P-F2108IML-ERC (ext) P-F2108IML-TPC (int)TS-F2108IML-FD Full dummy. P-F2108D (ext) P-F2108D (int)TS-F2108IML-HD Half dummy. P-F2108D
CS-F2108-8IML Passage set. P-F2108 (ext) P-F2108 (int)CS-F2108-8IML-PR Privacy set. P-F2108-8IML-ERC (ext) P-F2108-8IML-TPC (int)
TS-F2108IML Passage set. P-F2108 (ext) P-F2108 (int)TS-F2108IML-PR Privacy set. P-F2108IML-ERC (ext) P-F2108IML-TPC (int)TS-F2108IML-FD Full dummy. P-F2108D (ext) P-F2108D (int)TS-F2108IML-HD Half dummy. P-F2108D
TS-F2108-8IML Passage set. P-F2108 (ext) P-F2108 (int)TS-F2108-8IML-PR Privacy set. P-F2108-8IML-ERC (ext) P-F2108-8IML-TPC (int)
Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m
PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.
14-225
Revised 02/08/16
Illustrations are for demonstration purposes only. Any knob, lever or ring pull can be combined with any style or size escutcheon plate.
Complete sets with interior mortise lock and spindle. 2 1/4” center-to-center. (Shown)
Trim sets for interior mortise locks with spindle, no lock included. 2 1/4” center-to-center. (Shown)
Complete sets with interior mortise lock and spindle. 2 7/8” center-to-center.
Trim sets for interior mortise locks with spindle, no lock included. 2 7/8” center-to-center.
2 1/2” or 2 3/4” backset standard.Custom backsets available. Call for options and pricing.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.
2109 MESA INTERIOR MORTISE LOCK PASSAGE & PRIVACY SETS
CS-2109IML – Complete passage set with interior
mortise lock and spindle. OR TS-2109IML – Trim set only. No lock.
CS-2109IML-PR – Complete privacy set with interior
mortise lock and spindle. OR TS-2109IML-PR – Trim set only. No lock.
TS-2109IML-FD – Trim set only. – Full dummy.
TS-2109IML-HD – Trim set only. – Half dummy.
9"1 3/4" 1 3/4"
9"
1 3/4" 1 3/4"
9"
1 3/4" 1 3/4"
9"
1 3/4"
3" 3" 3" 3" 3" 3"
2 1/
4"
3"2
1/4"
Specify manufacturer & function of interior mortise lock.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.
CS-2109IML Passage set. P-2109 (ext) P-2109 (int)CS-2109IML-PR Privacy set. P-2109IML-ERC (ext) P-2109IML-TPC (int)TS-2109IML-FD Full dummy. P-2109D (ext) P-2109D (int)TS-2109IML-HD Half dummy. P-2109D
CS-2109-8IML Passage set. P-2109 (ext) P-2109 (int)CS-2109-8IML-PR Privacy set. P-2109-8IML-ERC (ext) P-2109-8IML-TPC (int)
TS-2109IML Passage set. P-2109 (ext) P-2109 (int)TS-2109IML-PR Privacy set. P-2109IML-ERC (ext) P-2109IML-TPC (int)TS-2109IML-FD Full dummy. P-2109D (ext) P-2109D (int)TS-2109IML-HD Half dummy. P-2109D
TS-2109-8IML Passage set. P-2109 (ext) P-2109 (int)TS-2109-8IML-PR Privacy set. P-2109-8IML-ERC (ext) P-2109-8IML-TPC (int)
Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m
PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.
14-226
Revised 02/08/16
Illustrations are for demonstration purposes only. Any knob, lever or ring pull can be combined with any style or size escutcheon plate.
Complete sets with interior mortise lock and spindle. 2 1/4” center-to-center. (Shown)
Trim sets for interior mortise locks with spindle, no lock included. 2 1/4” center-to-center. (Shown)
Complete sets with interior mortise lock and spindle. 2 7/8” center-to-center.
Trim sets for interior mortise locks with spindle, no lock included. 2 7/8” center-to-center.
2 1/2” or 2 3/4” backset standard.Custom backsets available. Call for options and pricing.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.
F2109 MESA INTERIOR MORTISE LOCK PASSAGE & PRIVACY SETS
CS-F2109IML – Complete passage set with interior
mortise lock and spindle. OR TS-F2109IML – Trim set only. No lock.
CS-F2109IML-PR – Complete privacy set with interior
mortise lock and spindle. OR TS-F2109IML-PR – Trim set only. No lock.
TS-F2109IML-FD – Trim set only. – Full dummy.
TS-F2109IML-HD – Trim set only. – Half dummy.
9"1 3/4" 1 3/4"
9"
1 3/4" 1 3/4"
9"
1 3/4" 1 3/4"
9"
1 3/4"
6"6" 6"6" 6"6"
2 1/
4"
Specify manufacturer & function of interior mortise lock.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.
CS-F2109IML Passage set. P-F2109 (ext) P-F2109 (int)CS-F2109IML-PR Privacy set. P-F2109IML-ERC (ext) P-F2109IML-TPC (int)TS-F2109IML-FD Full dummy. P-F2109D (ext) P-F2109D (int)TS-F2109IML-HD Half dummy. P-F2109D
CS-F2109-8IML Passage set. P-F2109 (ext) P-F2109 (int)CS-F2109-8IML-PR Privacy set. P-F2109-8IML-ERC (ext) P-F2109-8IML-TPC (int)
TS-F2109IML Passage set. P-F2109 (ext) P-F2109 (int)TS-F2109IML-PR Privacy set. P-F2109IML-ERC (ext) P-F2109IML-TPC (int)TS-F2109IML-FD Full dummy. P-F2109D (ext) P-F2109D (int)TS-F2109IML-HD Half dummy. P-F2109D
TS-F2109-8IML Passage set. P-F2109 (ext) P-F2109 (int)TS-F2109-8IML-PR Privacy set. P-F2109-8IML-ERC (ext) P-F2109-8IML-TPC (int)
Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m
PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.
14-227
Revised 02/08/16
Illustrations are for demonstration purposes only. Any knob, lever or ring pull can be combined with any style or size escutcheon plate.
Complete sets with interior mortise lock and spindle. 2 1/4” center-to-center. (Shown)
Trim sets for interior mortise locks with spindle, no lock included. 2 1/4” center-to-center. (Shown)
Complete sets with interior mortise lock and spindle. 2 7/8” center-to-center.
Trim sets for interior mortise locks with spindle, no lock included. 2 7/8” center-to-center.
2 1/2” or 2 3/4” backset standard.Custom backsets available. Call for options and pricing.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.
2110 MESA INTERIOR MORTISE LOCK PASSAGE & PRIVACY SETS
CS-2110IML – Complete passage set with interior
mortise lock and spindle. OR TS-2110IML – Trim set only. No lock.
CS-2110IML-PR – Complete privacy set with interior
mortise lock and spindle. OR TS-2110IML-PR – Trim set only. No lock.
TS-2110IML-FD – Trim set only. – Full dummy.
TS-2110IML-HD – Trim set only. – Half dummy.
10"
2 1/4" 2 1/4"
10"
2 1/4" 2 1/4"
10"
2 1/4" 2 1/4"
10"
2 1/4"
3 1/
2"
3 1/
2"
3 1/
2"
3 1/
2"
3 1/
2"
3 1/
2"
2 1/
4"
3 1/
2"2
1/4"
Specify manufacturer & function of interior mortise lock.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.
CS-2110IML Passage set. P-2110 (ext) P-2110 (int)CS-2110IML-PR Privacy set. P-2110IML-ERC (ext) P-2110IML-TPC (int)TS-2110IML-FD Full dummy. P-2110D (ext) P-2110D (int)TS-2110IML-HD Half dummy. P-2110D
CS-2110-8IML Passage set. P-2110 (ext) P-2110 (int)CS-2110-8IML-PR Privacy set. P-2110-8IML-ERC (ext) P-2110-8IML-TPC (int)
TS-2110IML Passage set. P-2110 (ext) P-2110 (int)TS-2110IML-PR Privacy set. P-2110IML-ERC (ext) P-2110IML-TPC (int)TS-2110IML-FD Full dummy. P-2110D (ext) P-2110D (int)TS-2110IML-HD Half dummy. P-2110D
TS-2110-8IML Passage set. P-2110 (ext) P-2110 (int)TS-2110-8IML-PR Privacy set. P-2110-8IML-ERC (ext) P-2110-8IML-TPC (int)
Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m
PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.
14-228
Revised 02/08/16
Illustrations are for demonstration purposes only. Any knob, lever or ring pull can be combined with any style or size escutcheon plate.
Complete sets with interior mortise lock and spindle. 2 1/4” center-to-center. (Shown)
Trim sets for interior mortise locks with spindle, no lock included. 2 1/4” center-to-center. (Shown)
Complete sets with interior mortise lock and spindle. 2 7/8” center-to-center.
Trim sets for interior mortise locks with spindle, no lock included. 2 7/8” center-to-center.
2 1/2” or 2 3/4” backset standard.Custom backsets available. Call for options and pricing.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.
F2110 MESA INTERIOR MORTISE LOCK PASSAGE & PRIVACY SETS
CS-F2110IML – Complete passage set with interior
mortise lock and spindle. OR TS-F2110IML – Trim set only. No lock.
CS-F2110IML-PR – Complete privacy set with interior
mortise lock and spindle. OR TS-F2110IML-PR – Trim set only. No lock.
TS-F2110IML-FD – Trim set only. – Full dummy.
TS-F2110IML-HD – Trim set only. – Half dummy.
10"
2 1/4" 2 1/4"
10"
2 1/4" 2 1/4"
10"
2 1/4" 2 1/4"
10"
2 1/4"
6 1/
2"
6 1/
2"
6 1/
2"
6 1/
2"
6 1/
2"
2 1/
4"
6 1/
2"
Specify manufacturer & function of interior mortise lock.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.
CS-F2110IML Passage set. P-F2110 (ext) P-F2110 (int)CS-F2110IML-PR Privacy set. P-F2110IML-ERC (ext) P-F2110IML-TPC (int)TS-F2110IML-FD Full dummy. P-F2110D (ext) P-F2110D (int)TS-F2110IML-HD Half dummy. P-F2110D
CS-F2110-8IML Passage set. P-F2110 (ext) P-F2110 (int)CS-F2110-8IML-PR Privacy set. P-F2110-8IML-ERC (ext) P-F2110-8IML-TPC (int)
TS-F2110IML Passage set. P-F2110 (ext) P-F2110 (int)TS-F2110IML-PR Privacy set. P-F2110IML-ERC (ext) P-F2110IML-TPC (int)TS-F2110IML-FD Full dummy. P-F2110D (ext) P-F2110D (int)TS-F2110IML-HD Half dummy. P-F2110D
TS-F2110-8IML Passage set. P-F2110 (ext) P-F2110 (int)TS-F2110-8IML-PR Privacy set. P-F2110-8IML-ERC (ext) P-F2110-8IML-TPC (int)
Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m
PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.
14-229
Revised 02/08/16
Illustrations are for demonstration purposes only. Any knob, lever or ring pull can be combined with any style or size escutcheon plate.
2111 MESA INTERIOR MORTISE LOCK PASSAGE & PRIVACY SETS
Complete sets with interior mortise lock and spindle. 2 1/4” center-to-center. (Shown)
Trim sets for interior mortise locks with spindle, no lock included. 2 1/4” center-to-center. (Shown)
Complete sets with interior mortise lock and spindle. 2 7/8” center-to-center.
Trim sets for interior mortise locks with spindle, no lock included. 2 7/8” center-to-center.
2 1/2” or 2 3/4” backset standard.Custom backsets available. Call for options and pricing.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.
Specify manufacturer & function of interior mortise lock.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.
CS-2111IML – Complete passage set with interior
mortise lock and spindle. OR TS-2111IML – Trim set only. No lock.
CS-2111IML-PR – Complete privacy set with interior
mortise lock and spindle. OR TS-2111IML-PR – Trim set only. No lock.
TS-2111IML-FD – Trim set only. – Full dummy.
TS-2111IML-HD – Trim set only. – Half dummy.
11"
2 1/2" 2 1/2"
3 3/
4"
3 3/
4"
11"
2 1/2" 2 1/2"
3 3/
4"
3 3/
4"
11"
2 1/2" 2 1/2"
3 3/
4"
3 3/
4"
11"
2 1/2"
3 3/
4"
2 1/
4"
2 1/
4"
CS-2111IML Passage set. P-2111 (ext) P-2111 (int)CS-2111IML-PR Privacy set. P-2111IML-ERC (ext) P-2111IML-TPC (int)TS-2111IML-FD Full dummy. P-2111D (ext) P-2111D (int)TS-2111IML-HD Half dummy. P-2111D
CS-2111-8IML Passage set. P-2111 (ext) P-2111 (int)CS-2111-8IML-PR Privacy set. P-2111-8IML-ERC (ext) P-2111-8IML-TPC (int)
TS-2111IML Passage set. P-2111 (ext) P-2111 (int)TS-2111IML-PR Privacy set. P-2111IML-ERC (ext) P-2111IML-TPC (int)TS-2111IML-FD Full dummy. P-2111D (ext) P-2111D (int)TS-2111IML-HD Half dummy. P-2111D
TS-2111-8IML Passage set. P-2111 (ext) P-2111 (int)TS-2111-8IML-PR Privacy set. P-2111-8IML-ERC (ext) P-2111-8IML-TPC (int)
Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m
PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.
14-230
Revised 02/08/16
Illustrations are for demonstration purposes only. Any knob, lever or ring pull can be combined with any style or size escutcheon plate.
F2111 MESA INTERIOR MORTISE LOCK PASSAGE & PRIVACY SETS
Complete sets with interior mortise lock and spindle. 2 1/4” center-to-center. (Shown)
Trim sets for interior mortise locks with spindle, no lock included. 2 1/4” center-to-center. (Shown)
Complete sets with interior mortise lock and spindle. 2 7/8” center-to-center.
Trim sets for interior mortise locks with spindle, no lock included. 2 7/8” center-to-center.
2 1/2” or 2 3/4” backset standard.Custom backsets available. Call for options and pricing.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.
Specify manufacturer & function of interior mortise lock.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.
CS-F2111IML – Complete passage set with interior
mortise lock and spindle. OR TS-F2111IML – Trim set only. No lock.
CS-F2111IML-PR – Complete privacy set with interior
mortise lock and spindle. OR TS-F2111IML-PR – Trim set only. No lock.
TS-F2111IML-FD – Trim set only. – Full dummy.
TS-F2111IML-HD – Trim set only. – Half dummy.
11"
2 1/2" 2 1/2"
7 1/
4"
7 1/
4"
11"
2 1/2" 2 1/2"
7 1/
4"
11"
2 1/2" 2 1/2"
7 1/
4"
7 1/
4"
11"
2 1/2"
7 1/
4"
2 1/
4"
CS-F2111IML Passage set. P-F2111 (ext) P-F2111 (int)CS-F2111IML-PR Privacy set. P-F2111IML-ERC (ext) P-F2111IML-TPC (int)TS-F2111IML-FD Full dummy. P-F2111D (ext) P-F2111D (int)TS-F2111IML-HD Half dummy. P-F2111D
CS-F2111-8IML Passage set. P-F2111 (ext) P-F2111 (int)CS-F2111-8IML-PR Privacy set. P-F2111-8IML-ERC (ext) P-F2111-8IML-TPC (int)
TS-F2111IML Passage set. P-F2111 (ext) P-F2111 (int)TS-F2111IML-PR Privacy set. P-F2111IML-ERC (ext) P-F2111IML-TPC (int)TS-F2111IML-FD Full dummy. P-F2111D (ext) P-F2111D (int)TS-F2111IML-HD Half dummy. P-F2111D
TS-F2111-8IML Passage set. P-F2111 (ext) P-F2111 (int)TS-F2111-8IML-PR Privacy set. P-F2111-8IML-ERC (ext) P-F2111-8IML-TPC (int)
Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m
PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.
14-231
Revised 02/08/16
Illustrations are for demonstration purposes only. Any knob, lever or ring pull can be combined with any style or size escutcheon plate.
Complete sets with interior mortise lock and spindle. 2 1/4” center-to-center.
Trim sets for interior mortise locks with spindle, no lock included. 2 1/4” center-to-center.
2 1/2” or 2 3/4” backset standard.Custom backsets available. Call for options and pricing.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.
2206 BURLAP INTERIOR MORTISE LOCK PASSAGE & PRIVACY SETS
CS-2206IML – Complete passage set with interior
mortise lock and spindle. OR TS-2206IML – Trim set only. No lock.
CS-2206IML-PR – Complete privacy set with interior
mortise lock and spindle. OR TS-2206IML-PR – Trim set only. No lock.
TS-2206IML-FD – Trim set only. – Full dummy.
TS-2206IML-HD – Trim set only. – Half dummy.
6"2 1/2" 2 1/2"
1 7/
8"
2 1/
4"
2 1/
4"
2 1/2" 2 1/2" 2 1/2" 2 1/2" 2 1/2"
6" 6" 6"
1 7/
8"
1 7/
8"
1 7/
8"
1 7/
8"
1 7/
8"
1 7/
8"
Specify manufacturer & function of interior mortise lock.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.
CS-2206IML Passage set. P-2206OH (ext) P-2206OH (int)
CS-2206IML-PR Privacy set. P-2206OH-IML-ERC (ext) P-2206OH-IML-TPC (int)
TS-2206IML-FD Full dummy. P-2206OH-D (ext) P-2206OH-D (int)
TS-2206IML-HD Half dummy. P-2206OH-D
TS-2206IML Passage set. P-2206OH (ext) P-2206OH (int)
TS-2206IML-PR Privacy set. P-2206OH-IML-ERC (ext) P-2206OH-IML-TPC (int)
TS-2206IML-FD Full dummy. P-2206OH-D (ext) P-2206OH-D (int)
TS-2206IML-HD Half dummy. P-2206OH-D
Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m
PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.
14-232
Revised 02/08/16
Illustrations are for demonstration purposes only. Any knob, lever or ring pull can be combined with any style or size escutcheon plate.
Complete sets with interior mortise lock and spindle. 2 1/4” center-to-center.
Trim sets for interior mortise locks with spindle, no lock included. 2 1/4” center-to-center.
2 1/2” or 2 3/4” backset standard.Custom backsets available. Call for options and pricing.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.
F2206 BURLAP INTERIOR MORTISE LOCK PASSAGE & PRIVACY SETS
CS-F2206IML – Complete passage set with interior
mortise lock and spindle. OR TS-F2206IML – Trim set only. No lock.
CS-F2206IML-PR – Complete privacy set with interior
mortise lock and spindle. OR TS-F2206IML-PR – Trim set only. No lock.
TS-F2206IML-FD – Trim set only. – Full dummy.
TS-F2206IML-HD – Trim set only. – Half dummy.
6"2 1/2" 2 1/2"
4 1/
8"
2 1/
4"
2 1/2" 2 1/2" 2 1/2" 2 1/2" 2 1/2"
6" 6" 6"
4 1/
8"
4 1/
8"
4 1/
8"
4 1/
8"
4 1/
8"
Specify manufacturer & function of interior mortise lock.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.
CS-F2206IML Passage set. P-F2206OH (ext) P-F2206OH (int)
CS-F2206IML-PR Privacy set. P-F2206OH-IML-ERC (ext) P-F2206OH-IML-TPC (int)
TS-F2206IML-FD Full dummy. P-F2206OH-D (ext) P-F2206OH-D (int)
TS-F2206IML-HD Half dummy. P-F2206OH-D
TS-F2206IML Passage set. P-F2206OH (ext) P-F2206OH (int)
TS-F2206IML-PR Privacy set. P-F2206OH-IML-ERC (ext) P-F2206OH-IML-TPC (int)
TS-F2206IML-FD Full dummy. P-F2206OH-D (ext) P-F2206OH-D (int)
TS-F2206IML-HD Half dummy. P-F2206OH-D
Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m
PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.
14-233
Revised 02/08/16
Illustrations are for demonstration purposes only. Any knob, lever or ring pull can be combined with any style or size escutcheon plate.
Complete sets with interior mortise lock and spindle. 2 1/4” center-to-center. (Shown)
Trim sets for interior mortise locks with spindle, no lock included. 2 1/4” center-to-center. (Shown)
2 1/2” or 2 3/4” backset standard.Custom backsets available. Call for options and pricing.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.
Complete sets with interior mortise lock and spindle. 2 7/8” center-to-center.
Trim sets for interior mortise locks with spindle, no lock included. 2 7/8” center-to-center.
2208 BURLAP INTERIOR MORTISE LOCK PASSAGE & PRIVACY SETS
8 3/
4"
2 1/2" 2 1/2"
CS-2208IML – Complete passage set with interior
mortise lock and spindle. OR TS-2208IML – Trim set only. No lock.
CS-2208IML-PR – Complete privacy set with interior
mortise lock and spindle. OR TS-2208IML-PR – Trim set only. No lock.
TS-2208IML-FD – Trim set only. – Full dummy.
TS-2208IML-HD – Trim set only. – Half dummy.
8 3/
4"2 1/2" 2 1/2"
8 3/
4"
2 1/2" 2 1/2"
8 3/
4"
2 1/2"
2 3/
4"
2 1/
4"
2 3/
4"
2 3/
4"
2 1/
4"2
3/4"
2 3/
4"
2 3/
4"
2 3/
4"
Specify manufacturer & function of interior mortise lock.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.
CS-2208IML Passage set. P-2208 (ext) P-2208 (int)CS-2208IML-PR Privacy set. P-2208IML-ERC (ext) P-2208IML-TPC (int)TS-2208IML-FD Full dummy. P-2208D (ext) P-2208D (int)TS-2208IML-HD Half dummy. P-2208D
CS-2208-8IML Passage set. P-2208 (ext) P-2208 (int)CS-2208-8IML-PR Privacy set. P-2208-8IML-ERC (ext) P-2208-8IML-TPC (int)
TS-2208IML Passage set. P-2208 (ext) P-2208 (int)TS-2208IML-PR Privacy set. P-2208IML-ERC (ext) P-2208IML-TPC (int)TS-2208IML-FD Full dummy. P-2208D (ext) P-2208D (int)TS-2208IML-HD Half dummy. P-2208D
TS-2208-8IML Passage set. P-2208 (ext) P-2208 (int)TS-2208-8IML-PR Privacy set. P-2208-8IML-ERC (ext) P-2208-8IML-TPC (int)
Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m
PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.
14-234
Revised 02/08/16
Illustrations are for demonstration purposes only. Any knob, lever or ring pull can be combined with any style or size escutcheon plate.
Complete sets with interior mortise lock and spindle. 2 1/4” center-to-center. (Shown)
Trim sets for interior mortise locks with spindle, no lock included. 2 1/4” center-to-center. (Shown)
2 1/2” or 2 3/4” backset standard.Custom backsets available. Call for options and pricing.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.
Complete sets with interior mortise lock and spindle. 2 7/8” center-to-center.
Trim sets for interior mortise locks with spindle, no lock included. 2 7/8” center-to-center.
F2208 BURLAP INTERIOR MORTISE LOCK PASSAGE & PRIVACY SETS
8 3/
4"
2 1/2" 2 1/2"
CS-F2208IML – Complete passage set with interior
mortise lock and spindle. OR TS-F2208IML – Trim set only. No lock.
CS-F2208IML-PR – Complete privacy set with interior
mortise lock and spindle. OR TS-F2208IML-PR – Trim set only. No lock.
TS-F2208IML-FD – Trim set only. – Full dummy.
TS-F2208IML-HD – Trim set only. – Half dummy.
8 3/
4"2 1/2" 2 1/2"
8 3/
4"
2 1/2" 2 1/2"
8 3/
4"
2 1/2"
6"
2 1/
4"
6" 6" 6" 6" 6"
Specify manufacturer & function of interior mortise lock.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.
CS-F2208IML Passage set. P-F2208 (ext) P-F2208 (int)CS-F2208IML-PR Privacy set. P-F2208IML-ERC (ext) P-F2208IML-TPC (int)TS-F2208IML-FD Full dummy. P-F2208D (ext) P-F2208D (int)TS-F2208IML-HD Half dummy. P-F2208D
CS-F2208-8IML Passage set. P-F2208 (ext) P-F2208 (int)CS-F2208-8IML-PR Privacy set. P-F2208-8IML-ERC (ext) P-F2208-8IML-TPC (int)
TS-F2208IML Passage set. P-F2208 (ext) P-F2208 (int)TS-F2208IML-PR Privacy set. P-F2208IML-ERC (ext) P-F2208IML-TPC (int)TS-F2208IML-FD Full dummy. P-F2208D (ext) P-F2208D (int)TS-F2208IML-HD Half dummy. P-F2208D
TS-F2208-8IML Passage set. P-F2208 (ext) P-F2208 (int)TS-F2208-8IML-PR Privacy set. P-F2208-8IML-ERC (ext) P-F2208-8IML-TPC (int)
Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m
PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.
14-235
Revised 02/08/16
Illustrations are for demonstration purposes only. Any knob, lever or ring pull can be combined with any style or size escutcheon plate.
Complete sets with interior mortise lock and spindle. 2 1/4” center-to-center. (Shown)
Trim sets for interior mortise locks with spindle, no lock included. 2 1/4” center-to-center. (Shown)
2 1/2” or 2 3/4” backset standard.Custom backsets available. Call for options and pricing.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.
Complete sets with interior mortise lock and spindle. 2 7/8” center-to-center.
Trim sets for interior mortise locks with spindle, no lock included. 2 7/8” center-to-center.
2210 BURLAP INTERIOR MORTISE LOCK PASSAGE & PRIVACY SETS
CS-2210IML – Complete passage set with interior
mortise lock and spindle. OR TS-2210IML – Trim set only. No lock.
CS-2210IML-PR – Complete privacy set with interior
mortise lock and spindle. OR TS-2210IML-PR – Trim set only. No lock.
TS-2210IML-FD – Trim set only. – Full dummy.
TS-2210IML-HD – Trim set only. – Half dummy.
10"
2 1/2" 2 1/2"
3 1/
8"
3 1/
8"
3 1/
8"2
1/4"
3 1/
8"2
1/4" 10
"
2 1/2" 2 1/2"
10"
2 1/2" 2 1/2"
10"
2 1/2"
3 1/
8"
3 1/
8"
3 1/
8"
Specify manufacturer & function of interior mortise lock.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.
CS-2210IML Passage set. P-2210 (ext) P-2210 (int)CS-2210IML-PR Privacy set. P-2210IML-ERC (ext) P-2210IML-TPC (int)TS-2210IML-FD Full dummy. P-2210D (ext) P-2210D (int)TS-2210IML-HD Half dummy. P-2210D
CS-2210-8IML Passage set. P-2210 (ext) P-2210 (int)CS-2210-8IML-PR Privacy set. P-2210-8IML-ERC (ext) P-2210-8IML-TPC (int)
TS-2210IML Passage set. P-2210 (ext) P-2210 (int)TS-2210IML-PR Privacy set. P-2210IML-ERC (ext) P-2210IML-TPC (int)TS-2210IML-FD Full dummy. P-2210D (ext) P-2210D (int)TS-2210IML-HD Half dummy. P-2210D
TS-2210-8IML Passage set. P-2210 (ext) P-2210 (int)TS-2210-8IML-PR Privacy set. P-2210-8IML-ERC (ext) P-2210-8IML-TPC (int)
Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m
PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.
14-236
Revised 02/08/16
Illustrations are for demonstration purposes only. Any knob, lever or ring pull can be combined with any style or size escutcheon plate.
Complete sets with interior mortise lock and spindle. 2 1/4” center-to-center. (Shown)
Trim sets for interior mortise locks with spindle, no lock included. 2 1/4” center-to-center. (Shown)
2 1/2” or 2 3/4” backset standard.Custom backsets available. Call for options and pricing.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.
Complete sets with interior mortise lock and spindle. 2 7/8” center-to-center.
Trim sets for interior mortise locks with spindle, no lock included. 2 7/8” center-to-center.
F2210 BURLAP INTERIOR MORTISE LOCK PASSAGE & PRIVACY SETS
CS-F2210IML – Complete passage set with interior
mortise lock and spindle. OR TS-F2210IML – Trim set only. No lock.
CS-F2210IML-PR – Complete privacy set with interior
mortise lock and spindle. OR TS-F2210IML-PR – Trim set only. No lock.
TS-F2210IML-FD – Trim set only. – Full dummy.
TS-F2210IML-HD – Trim set only. – Half dummy.
10"
2 1/2" 2 1/2"
6 7/
8"
2 1/
4"
10"
2 1/2" 2 1/2"
10"
2 1/2" 2 1/2"
10"
2 1/2"
6 7/
8"
6 7/
8"
6 7/
8"
6 7/
8"
6 7/
8"
Specify manufacturer & function of interior mortise lock.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.
CS-F2210IML Passage set. P-F2210 (ext) P-F2210 (int)CS-F2210IML-PR Privacy set. P-F2210IML-ERC (ext) P-F2210IML-TPC (int)TS-F2210IML-FD Full dummy. P-F2210D (ext) P-F2210D (int)TS-F2210IML-HD Half dummy. P-F2210D
CS-F2210-8IML Passage set. P-F2210 (ext) P-F2210 (int)CS-F2210-8IML-PR Privacy set. P-F2210-8IML-ERC (ext) P-F2210-8IML-TPC (int)
TS-F2210IML Passage set. P-F2210 (ext) P-F2210 (int)TS-F2210IML-PR Privacy set. P-F2210IML-ERC (ext) P-F2210IML-TPC (int)TS-F2210IML-FD Full dummy. P-F2210D (ext) P-F2210D (int)TS-F2210IML-HD Half dummy. P-F2210D
TS-F2210-8IML Passage set. P-F2210 (ext) P-F2210 (int)TS-F2210-8IML-PR Privacy set. P-F2210-8IML-ERC (ext) P-F2210-8IML-TPC (int)
Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m
PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.
14-237
Revised 02/08/16
Illustrations are for demonstration purposes only. Any knob, lever or ring pull can be combined with any style or size escutcheon plate.
Complete sets with interior mortise lock and spindle. 2 1/4” center-to-center.
Trim sets for interior mortise locks with spindle, no lock included. 2 1/4” center-to-center.
2 1/2” or 2 3/4” backset standard.Custom backsets available. Call for options and pricing.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.
N949 NOVUS INTERIOR MORTISE LOCK PASSAGE & PRIVACY SETS
Specify manufacturer & function of interior mortise lock.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.
CS-N949IML – Complete passage set with interior
mortise lock and spindle. OR TS-N949IML – Trim set only. No lock.
CS-N949IML-PR – Complete privacy set with interior
mortise lock and spindle. OR TS-N949IML-PR – Trim set only. No lock.
TS-N949IML-FD – Trim set only. – Full dummy.
TS-N949IML-HD – Trim set only. – Half dummy.
6"2" 2"
6"
2" 2"
6"
2" 2"
6"
2"
2" 2" 2" 2" 2" 2"
2 1/
4"
2"2
1/4"
CS-N949IML Passage set. P-N949OH (ext) P-N949OH (int)
CS-N949IML-PR Privacy set. P-N949OH-IML-ERC (ext) P-N949OH-IML-TPC (int)
TS-N949IML-FD Full dummy. P-N949OH-D (ext) P-N949OH-D (int)
TS-N949IML-HD Half dummy. P-N949OH-D
TS-N949IML Passage set. P-N949OH (ext) P-N949OH (int)
TS-N949IML-PR Privacy set. P-N949OH-IML-ERC (ext) P-N949OH-IML-TPC (int)
TS-N949IML-FD Full dummy. P-N949OH-D (ext) P-N949OH-D (int)
TS-N949IML-HD Half dummy. P-N949OH-D
Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m
PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.
14-238
Revised 02/08/16
Illustrations are for demonstration purposes only. Any knob, lever or ring pull can be combined with any style or size escutcheon plate.
Trim sets for interior mortise locks with spindle, no lock included. 2 1/4” center-to-center.
2 1/2” or 2 3/4” backset standard.Custom backsets available. Call for options and pricing.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.
Complete sets with interior mortise lock and spindle. 2 1/4” center-to-center.
F-N949 NOVUS INTERIOR MORTISE LOCK PASSAGE & PRIVACY SETS
Specify manufacturer & function of interior mortise lock.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.
CS-F-N949IML – Complete passage set with interior
mortise lock and spindle. OR TS-F-N949IML – Trim set only. No lock.
CS-F-N949IML-PR – Complete privacy set with interior
mortise lock and spindle. OR TS-F-N949IML-PR – Trim set only. No lock.
TS-F-N949IML-FD – Trim set only. – Full dummy.
TS-F-N949IML-HD – Trim set only. – Half dummy.
6"2" 2"
6"
2" 2"
6"
2" 2"
6"
2"
4"4" 4"4" 4"4" 2 1/
4"
CS-F-N949IML Passage set. P-F-N949OH (ext) P-F-N949OH (int)
CS-F-N949IML-PR Privacy set. P-F-N949OH-IML-ERC (ext) P-F-N949OH-IML-TPC (int)
TS-F-N949IML-FD Full dummy. P-F-N949D (ext) P-F-N949D (int)
TS-F-N949IML-HD Half dummy. P-F-N949D
TS-F-N949IML Passage set. P-F-N949OH (ext) P-F-N949OH (int)
TS-F-N949IML-PR Privacy set. P-F-N949OH-IML-ERC (ext) P-F-N949OH-IML-TPC (int)
TS-F-N949IML-FD Full dummy. P-F-N949D (ext) P-F-N949D (int)
TS-F-N949IML-HD Half dummy. P-F-N949D
Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m
PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.
14-239
Revised 02/08/16
Illustrations are for demonstration purposes only. Any knob, lever or ring pull can be combined with any style or size escutcheon plate.
Complete sets with interior mortise lock and spindle. 2 1/4” center-to-center. (Shown)
Trim sets for interior mortise locks with spindle, no lock included. 2 1/4” center-to-center. (Shown)
Complete sets with interior mortise lock and spindle. 2 7/8” center-to-center.
Trim sets for interior mortise locks with spindle, no lock included. 2 7/8” center-to-center.
2 1/2” or 2 3/4” backset standard.Custom backsets available. Call for options and pricing.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.
N950 NOVUS INTERIOR MORTISE LOCK PASSAGE & PRIVACY SETS
Specify manufacturer & function of interior mortise lock.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.
CS-N950IML – Complete passage set with interior
mortise lock and spindle. OR TS-N950IML – Trim set only. No lock.
CS-N950IML-PR – Complete privacy set with interior
mortise lock and spindle. OR TS-N950IML-PR – Trim set only. No lock.
TS-N950IML-FD – Trim set only. – Full dummy.
TS-N950IML-HD – Trim set only. – Half dummy.
8 3/
4"2" 2"
8 3/
4"
2" 2"
8 3/
4"
2" 2"
8 3/
4"
2"
2 3/
4"
2 3/
4"
2 3/
4"
2 3/
4"
2 3/
4"
2 3/
4"
2 3/
4"
2 1/
4"
2 1/
4"
CS-N950IML Passage set. P-N950 (ext) P-N950 (int)
CS-N950IML-PR Privacy set. P-N950IML-ERC (ext) P-N950IML-TPC (int)
TS-N950IML-FD Full dummy. P-N950D (ext) P-N950D (int)
TS-N950IML-HD Half dummy. P-N950D
CS-N950-8IML Passage set. P-N950 (ext) P-N950 (int)
CS-N950-8IML-PR Privacy set. P-N950-8IML-ERC (ext) P-N950-8IML-TPC (int)
TS-N950IML Passage set. P-N950 (ext) P-N950 (int)
TS-N950IML-PR Privacy set. P-N950IML-ERC (ext) P-N950IML-TPC (int)
TS-N950IML-FD Full dummy. P-N950D (ext) P-N950D (int)
TS-N950IML-HD Half dummy. P-N950D
TS-N950-8IML Passage set. P-N950 (ext) P-N950 (int)
TS-N950-8IML-PR Privacy set. P-N950-8IML-ERC (ext) P-N950-8IML-TPC (int)
Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m
PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.
14-240
Revised 02/08/16
Illustrations are for demonstration purposes only. Any knob, lever or ring pull can be combined with any style or size escutcheon plate.
Complete sets with interior mortise lock and spindle. 2 1/4” center-to-center. (Shown)
Complete sets with interior mortise lock and spindle. 2 7/8” center-to-center.
Trim sets for interior mortise locks with spindle, no lock included. 2 1/4” center-to-center. (Shown)
Trim sets for interior mortise locks with spindle, no lock included. 2 7/8” center-to-center.
2 1/2” or 2 3/4” backset standard.Custom backsets available. Call for options and pricing.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.
F-N950 NOVUS INTERIOR MORTISE LOCK PASSAGE & PRIVACY SETS
Specify manufacturer & function of interior mortise lock.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.
CS-F-N950IML – Complete passage set with interior
mortise lock and spindle. OR TS-F-N950IML – Trim set only. No lock.
CS-F-N950IML-PR – Complete privacy set with interior
mortise lock and spindle. – Shown w/RC-7. OR TS-F-N950IML-PR – Trim set only. No lock.
TS-F-N950IML-FD – Trim set only. – Full dummy.
TS-F-N950IML-HD – Trim set only. – Half dummy.
8 3/
4"2" 2"
8 3/
4"
2" 2"
8 3/
4"
2" 2"
8 3/
4"
2"
6"6" 6"6" 6"6"
2 1/
4"
CS-F-N950IML Passage set. P-F-N950 (ext) P-F-N950 (int)CS-F-N950IML-PR Privacy set. P-F-N950IML-ERC (ext) P-F-N950IML-TPC (int)TS-F-N950IML-FD Full dummy. P-F-N950D (ext) P-F-N950D (int)TS-F-N950IML-HD Half dummy. P-F-N950D
CS-F-N950-8IML Passage set. P-F-N950 (ext) P-F-N950 (int)CS-F-N950-8IML-PR Privacy set. P-F-N950-8IML-ERC (ext) P-F-N950-8IML-TPC (int)
TS-F-N950IML Passage set. P-F-N950 (ext) P-F-N950 (int)TS-F-N950IML-PR Privacy set. P-F-N950IML-ERC (ext) P-F-N950IML-TPC (int)TS-F-N950IML-FD Full dummy. P-F-N950D (ext) P-F-N950D (int)TS-F-N950IML-HD Half dummy. P-F-N950D
TS-F-N950-8IML Passage set. P-F-N950 (ext) P-F-N950 (int)TS-F-N950-8IML-PR Privacy set. P-F-N950-8IML-ERC (ext) P-F-N950-8IML-TPC (int)
Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m
PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.
14-241
Revised 02/08/16
Illustrations are for demonstration purposes only. Any knob, lever or ring pull can be combined with any style or size escutcheon plate.
Complete sets with interior mortise lock and spindle. 2 1/4” center-to-center. (Shown)
Trim sets for interior mortise locks with spindle, no lock included. 2 1/4” center-to-center. (Shown)
Complete sets with interior mortise lock and spindle. 2 7/8” center-to-center.
Trim sets for interior mortise locks with spindle, no lock included. 2 7/8” center-to-center.
2 1/2” or 2 3/4” backset standard.Custom backsets available. Call for options and pricing.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.
N951 NOVUS INTERIOR MORTISE LOCK PASSAGE & PRIVACY SETS
Specify manufacturer & function of interior mortise lock.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.
CS-N951IML – Complete passage set with interior
mortise lock and spindle. OR TS-N951IML – Trim1set only. No lock.
CS-N951IML-PR – Complete privacy set with interior
mortise lock and spindle. – Shown w/RC-7. OR TS-N951IML-PR – Trim set only. No lock.
TS-N951IML-FD – Trim set only. – Full dummy.
TS-N951IML-HD – Trim set only. – Half dummy.
10"
10"
2" 2"2" 2"
10"
2" 2"
10"
2"
3 1/
4"
3 1/
4"
3 1/
4"
3 1/
4"
3 1/
4"
3 1/
4"
3 1/
4"
2 1/
4"
2 1/
4"
CS-N951IML Passage set. P-N951IML (ext) P-N951IML (int)CS-N951IML-PR Privacy set. P-N951IML-ERC (ext) P-N951IML-TPC (int)TS-N951IML-FD Full dummy. P-N951D (ext) P-N951D (int)TS-N951IML-HD Half dummy. P-N951D
CS-N951-8IML Passage set. P-N951IML (ext) P-N951IML (int)CS-N951-8IML-PR Privacy set. P-N951-8IML-ERC (ext) P-N951-8IML-TPC (int)
TS-N951IML Passage set. P-N951IML (ext) P-N951IML (int)TS-N951IML-PR Privacy set. P-N951IML-ERC (ext) P-N951IML-TPC (int)TS-N951IML-FD Full dummy. P-N951D (ext) P-N951D (int)TS-N951IML-HD Half dummy. P-N951D
TS-N951-8IML Passage set. P-N951IML (ext) P-N951IML (int)TS-N951-8IML-PR Privacy set. P-N951-8IML-ERC (ext) P-N951-8IML-TPC (int)
Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m
PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.
14-242
Revised 02/08/16
Illustrations are for demonstration purposes only. Any knob, lever or ring pull can be combined with any style or size escutcheon plate.
Complete sets with interior mortise lock and spindle. 2 1/4” center-to-center. (Shown)
Trim sets for interior mortise locks with spindle, no lock included. 2 1/4” center-to-center. (Shown)
Complete sets with interior mortise lock and spindle. 2 7/8” center-to-center.
Trim sets for interior mortise locks with spindle, no lock included. 2 7/8” center-to-center.
2 1/2” or 2 3/4” backset standard.Custom backsets available. Call for options and pricing.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.
F-N951 NOVUS INTERIOR MORTISE LOCK PASSAGE & PRIVACY SETS
Specify manufacturer & function of interior mortise lock.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.
CS-F-N951IML – Complete passage set with interior
mortise lock and spindle. OR TS-F-N951IML – Trim1set only. No lock.
CS-F-N951IML-PR – Complete privacy set with interior
mortise lock and spindle. – Shown w/RC-7. OR TS-F-N951IML-PR – Trim set only. No lock.
TS-F-N951IML-FD – Trim set only. – Full dummy.
TS-F-N951IML-HD – Trim set only. – Half dummy.
10"
2" 2"
10"
2" 2"
10"
2" 2"
10"
2"
6 3/
4"
6 3/
4"
6 3/
4"
6 3/
4"
6 3/
4"
6 3/
4"
2 1/
4"
CS-F-N951IML Passage set. P-F-N951IML (ext) P-F-N951IML (int)CS-F-N951IML-PR Privacy set. P-F-N951IML-ERC (ext) P-F-N951IML-TPC (int)TS-F-N951IML-FD Full dummy. P-F-N951D (ext) P-F-N951D (int)TS-F-N951IML-HD Half dummy. P-F-N951D
CS-F-N951-8IML Passage set. P-F-N951IML (ext) P-F-N951IML (int)CS-F-N951-8IML-PR Privacy set. P-F-N951-8IML-ERC (ext) P-F-N951-8IML-TPC (int)
TS-F-N951IML Passage set. P-F-N951IML (ext) P-F-N951IML (int)TS-F-N951IML-PR Privacy set. P-F-N951IML-ERC (ext) P-F-N951IML-TPC (int)TS-F-N951IML-FD Full dummy. P-F-N951D (ext) P-F-N951D (int)TS-F-N951IML-HD Half dummy. P-F-N951D
TS-F-N951-8IML Passage set. P-F-N951IML (ext) P-F-N951IML (int)TS-F-N951-8IML-PR Privacy set. P-F-N951-8IML-ERC (ext) P-F-N951-8IML-TPC (int)
Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m
PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.
14-243
Revised 02/08/16
Illustrations are for demonstration purposes only. Any knob, lever or ring pull can be combined with any style or size escutcheon plate.
Complete sets with interior mortise lock and spindle. 2 1/4” center-to-center. (Shown)
Trim sets for interior mortise locks with spindle, no lock included. 2 1/4” center-to-center. (Shown)
Complete sets with interior mortise lock and spindle. 2 7/8” center-to-center.
Trim sets for interior mortise locks with spindle, no lock included. 2 7/8” center-to-center.
2 1/2” or 2 3/4” backset standard.Custom backsets available. Call for options and pricing.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.
N952 NOVUS INTERIOR MORTISE LOCK PASSAGE & PRIVACY SETS
Specify manufacturer & function of interior mortise lock.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.
CS-N952IML – Complete passage set with interior
mortise lock and spindle. OR TS-N952IML – Trim1set only. No lock.
CS-N952IML-PR – Complete privacy set with interior
mortise lock and spindle. – Shown w/RC-7. OR TS-N952IML-PR – Trim set only. No lock.
TS-N952IML-FD – Trim set only. – Full dummy.
TS-N952IML-HD – Trim set only. – Half dummy.
10"
2 1/2" 2 1/2"
10"
2 1/2" 2 1/2"
10"
2 1/2" 2 1/2"
10"
2 1/2"
3 1/
4"
3 1/
4"
3 1/
4"
3 1/
4"
3 1/
4"
3 1/
4"
2 1/
4"
3 1/
4"2
1/4"
CS-N952IML Passage set. P-N952IML (ext) P-N952IML (int)CS-N952IML-PR Privacy set. P-N952IML-ERC (ext) P-N952IML-TPC (int)TS-N952IML-FD Full dummy. P-N952D (ext) P-N952D (int)TS-N952IML-HD Half dummy. P-N952D
CS-N952-8IML Passage set. P-N952IML (ext) P-N952IML (int)CS-N952-8IML-PR Privacy set. P-N952-8IML-ERC (ext) P-N952-8IML-TPC (int)
TS-N952IML Passage set. P-N952IML (ext) P-N952IML (int)TS-N952IML-PR Privacy set. P-N952IML-ERC (ext) P-N952IML-TPC (int)TS-N952IML-FD Full dummy. P-N952D (ext) P-N952D (int)TS-N952IML-HD Half dummy. P-N952D
TS-N952-8IML Passage set. P-N952IML (ext) P-N952IML (int)TS-N952-8IML-PR Privacy set. P-N952-8IML-ERC (ext) P-N952-8IML-TPC (int)
Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m
PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.
14-244
Revised 02/08/16
Illustrations are for demonstration purposes only. Any knob, lever or ring pull can be combined with any style or size escutcheon plate.
Trim sets for interior mortise locks with spindle, no lock included. 2 1/4” center-to-center. (Shown)
Complete sets with interior mortise lock and spindle. 2 7/8” center-to-center.
Trim sets for interior mortise locks with spindle, no lock included. 2 7/8” center-to-center.
2 1/2” or 2 3/4” backset standard.Custom backsets available. Call for options and pricing.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.
Complete sets with interior mortise lock and spindle. (Shown)
F-N952 NOVUS INTERIOR MORTISE LOCK PASSAGE & PRIVACY SETS
Specify manufacturer & function of interior mortise lock.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.
CS-N952IML – Complete passage set with interior
mortise lock and spindle.. OR TS-N952IML – Trim1set only. No lock.
CS-N952IML-PR – Complete privacy set with interior
mortise lock and spindle. – Shown w/RC-7. OR TS-N952IML-PR – Trim set only. No lock.
TS-N952IML-FD – Trim set only. – Full dummy.
TS-N952IML-HD – Trim set only. – Half dummy.
10"
2 1/2" 2 1/2"
10"
2 1/2" 2 1/2"
10"
2 1/2" 2 1/2"
10"
2 1/2"
6 3/
4"
6 3/
4"
6 3/
4"
6 3/
4"
6 3/
4"
6 3/
4"
2 1/
4"
CS-F-N952IML Passage set. P-F-N952IML (ext) P-F-N952IML (int)CS-F-N952IML-PR Privacy set. P-F-N952IML-ERC (ext) P-F-N952IML-TPC (int)TS-F-N952IML-FD Full dummy. P-F-N952D (ext) P-F-N952D (int)TS-F-N952IML-HD Half dummy. P-F-N952D
CS-F-N952-8IML Passage set. P-F-N952IML (ext) P-F-N952IML (int)CS-F-N952-8IML-PR Privacy set. P-F-N952-8IML-ERC (ext) P-F-N952-8IML-TPC (int)
TS-F-N952IML Passage set. P-F-N952IML (ext) P-F-N952IML (int)TS-F-N952IML-PR Privacy set. P-F-N952IML-ERC (ext) P-F-N952IML-TPC (int)TS-F-N952IML-FD Full dummy. P-F-N952D (ext) P-F-N952D (int)TS-F-N952IML-HD Half dummy. P-F-N952D
TS-F-N952-8IML Passage set. P-F-N952IML (ext) P-F-N952IML (int)TS-F-N952-8IML-PR Privacy set. P-F-N952-8IML-ERC (ext) P-F-N952-8IML-TPC (int)
Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m
PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.
14-245
Revised 02/08/16
Illustrations are for demonstration purposes only. Any knob, lever or ring pull can be combined with any style or size escutcheon plate.
Complete sets with interior mortise lock and spindle. 2 1/4” center-to-center. (Shown)
Trim sets for interior mortise locks with spindle, no lock included. 2 1/4” center-to-center. (Shown)
Complete sets with interior mortise lock and spindle. 2 7/8” center-to-center.
Trim sets for interior mortise locks with spindle, no lock included. 2 7/8” center-to-center.
2 1/2” or 2 3/4” backset standard.Custom backsets available. Call for options and pricing.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.
N953 NOVUS INTERIOR MORTISE LOCK PASSAGE & PRIVACY SETS
Specify manufacturer & function of interior mortise lock.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.
CS-N953IML – Complete passage set with interior
mortise lock and spindle. OR TS-N953IML – Trim1set only. No lock.
CS-N953IML-PR – Complete privacy set with interior
mortise lock and spindle. OR TS-N953IML-PR – Trim set only. No lock.
TS-N953IML-FD – Trim set only. – Full dummy.
TS-N953IML-HD – Trim set only. – Half dummy.
8 3/
4"
2 1/2" 2 1/2"
8 3/
4"
2 1/2" 2 1/2"
8 3/
4"
2 1/2" 2 1/2"
8 3/
4"
2 1/2"
2 3/
4"
2 3/
4"
2 3/
4"
2 3/
4"
2 3/
4"
2 3/
4"
2 1/
4"
2 3/
4"2
1/4"
CS-N953IML Passage set. P-N953 (ext) P-N953 (int)CS-N953IML-PR Privacy set. P-N953IML-ERC (ext) P-N953IML-TPC (int)TS-N953IML-FD Full dummy. P-N953D (ext) P-N953D (int)TS-N953IML-HD Half dummy. P-N953D
CS-N953-8IML Passage set. P-N953 (ext) P-N953 (int)CS-N953-8IML-PR Privacy set. P-N953-8IML-ERC (ext) P-N953-8IML-TPC (int)
TS-N953IML Passage set. P-N953 (ext) P-N953 (int)TS-N953IML-PR Privacy set. P-N953IML-ERC (ext) P-N953IML-TPC (int)TS-N953IML-FD Full dummy. P-N953D (ext) P-N953D (int)TS-N953IML-HD Half dummy. P-N953D
TS-N953-8IML Passage set. P-N953 (ext) P-N953 (int)TS-N953-8IML-PR Privacy set. P-N953-8IML-ERC (ext) P-N953-8IML-TPC (int)
Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m
PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.
14-246
Revised 02/08/16
Illustrations are for demonstration purposes only. Any knob, lever or ring pull can be combined with any style or size escutcheon plate.
Complete sets with interior mortise lock and spindle. 2 1/4” center-to-center. (Shown)
Trim sets for interior mortise locks with spindle, no lock included. 2 1/4” center-to-center. (Shown)
Complete sets with interior mortise lock and spindle. 2 7/8” center-to-center.
Trim sets for interior mortise locks with spindle, no lock included. 2 7/8” center-to-center.
2 1/2” or 2 3/4” backset standard.Custom backsets available. Call for options and pricing.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.
F-N953 NOVUS INTERIOR MORTISE LOCK PASSAGE & PRIVACY SETS
Specify manufacturer & function of interior mortise lock.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.
CS-F-N953IML – Complete passage set with interior
mortise lock and spindle. OR TS-F-N953IML – Trim1set only. No lock.
CS-F-N953IML-PR – Complete privacy set with interior
mortise lock and spindle. OR TS-F-N953IML-PR – Trim set only. No lock.
TS-F-N953IML-FD – Trim set only. – Full dummy.
TS-F-N953IML-HD – Trim set only. – Half dummy.
8 3/
4"2 1/2" 2 1/2"
8 3/
4"
2 1/2" 2 1/2"
8 3/
4"
2 1/2" 2 1/2"
8 3/
4"
2 1/2"
6"6" 6"6" 6"6"
2 1/
4"
CS-F-N953IML Passage set. P-F-N953 (ext) P-F-N953 (int)CS-F-N953IML-PR Privacy set. P-F-N953IML-ERC (ext) P-F-N953IML-TPC (int)TS-F-N953IML-FD Full dummy. P-F-N953D (ext) P-F-N953D (int)TS-F-N953IML-HD Half dummy. P-F-N953D
CS-F-N953-8IML Passage set. P-F-N953 (ext) P-F-N953 (int)CS-F-N953-8IML-PR Privacy set. P-F-N953-8IML-ERC (ext) P-F-N953-8IML-TPC (int)
TS-F-N953IML Passage set. P-F-N953 (ext) P-F-N953 (int)TS-F-N953IML-PR Privacy set. P-F-N953IML-ERC (ext) P-F-N953IML-TPC (int)TS-F-N953IML-FD Full dummy. P-F-N953D (ext) P-F-N953D (int)TS-F-N953IML-HD Half dummy. P-F-N953D
TS-F-N953-8IML Passage set. P-F-N953 (ext) P-F-N953 (int)TS-F-N953-8IML-PR Privacy set. P-F-N953-8IML-ERC (ext) P-F-N953-8IML-TPC (int)
Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m
PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.
14-247
Revised 02/08/16
Illustrations are for demonstration purposes only. Any knob, lever or ring pull can be combined with any style or size escutcheon plate.
Complete sets with interior mortise lock and spindle. 2 1/4” center-to-center.
Trim sets for interior mortise locks with spindle, no lock included. 2 1/4” center-to-center.
2 1/2” or 2 3/4” backset standard.Custom backsets available. Call for options and pricing.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.
N954 NOVUS INTERIOR MORTISE LOCK PASSAGE & PRIVACY SETS
Specify manufacturer & function of interior mortise lock.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.
CS-N954IML – Complete passage set with interior
mortise lock and spindle. OR TS-N954IML – Trim1set only. No lock.
CS-N954IML-PR – Complete privacy set with interior
mortise lock and spindle. OR TS-N954IML-PR – Trim set only. No lock.
TS-N954IML-FD – Trim set only. – Full dummy.
TS-N954IML-HD – Trim set only. – Half dummy.
6"2 1/2" 2 1/2"
6"
2 1/2" 2 1/2"
6"
2 1/2" 2 1/2"
6"
2 1/2"
2" 2" 2" 2" 2" 2"
2 1/
4"
2"2
1/4"
CS-N954IML Passage set. P-N954OH (ext) P-N954OH (int)
CS-N954IML-PR Privacy set. P-N954OH-IML-ERC (ext) P-N954OH-IML-TPC (int)
TS-N954IML-FD Full dummy. P-N954OH-D (ext) P-N954OH-D (int)
TS-N954IML-HD Half dummy. P-N954OH-D
TS-N954IML Passage set. P-N954OH (ext) P-N954OH (int)
TS-N954IML-PR Privacy set. P-N954OH-IML-ERC (ext) P-N954OH-IML-TPC (int)
TS-N954IML-FD Full dummy. P-N954OH-D (ext) P-N954OH-D (int)
TS-N954IML-HD Half dummy. P-N954OH-D
Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m
PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.
14-248
Revised 02/08/16
Illustrations are for demonstration purposes only. Any knob, lever or ring pull can be combined with any style or size escutcheon plate.
Complete sets with interior mortise lock and spindle. 2 1/4” center-to-center.
Trim sets for interior mortise locks with spindle, no lock included. 2 1/4” center-to-center.
2 1/2” or 2 3/4” backset standard.Custom backsets available. Call for options and pricing.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.
F-N954 NOVUS INTERIOR MORTISE LOCK PASSAGE & PRIVACY SETS
Specify manufacturer & function of interior mortise lock.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.
CS-F-N954IML – Complete passage set with interior
mortise lock and spindle. OR TS-F-N954IML – Trim1set only. No lock.
CS-F-N954IML-PR – Complete privacy set with interior
mortise lock and spindle. OR TS-F-N954IML-PR – Trim set only. No lock.
TS-F-N954IML-FD – Trim set only. – Full dummy.
TS-F-N954IML-HD – Trim set only. – Half dummy.
6"2 1/2" 2 1/2"
6"
2 1/2" 2 1/2"
6"
2 1/2" 2 1/2"
6"
2 1/2"
4"4" 4"4" 4"4" 2 1/
4"
CS-F-N954IML Passage set. P-F-N954OH (ext) P-F-N954OH (int)
CS-F-N954IML-PR Privacy set. P-F-N954OH-IML-ERC (ext) P-F-N954OH-IML-TPC (int)
TS-F-N954IML-FD Full dummy. P-F-N954D (ext) P-F-N954D (int)
TS-F-N954IML-HD Half dummy. P-F-N954D
TS-F-N954IML Passage set. P-F-N954OH (ext) P-F-N954OH (int)
TS-F-N954IML-PR Privacy set. P-F-N954OH-IML-ERC (ext) P-F-N954OH-IML-TPC (int)
TS-F-N954IML-FD Full dummy. P-F-N954D (ext) P-F-N954D (int)
TS-F-N954IML-HD Half dummy. P-F-N954D
Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m
PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.
14-249
Revised 02/08/16
Illustrations are for demonstration purposes only. Any knob, lever or ring pull can be combined with any style or size escutcheon plate.
Complete sets with interior mortise lock and spindle. 2 1/4” center-to-center. (Shown)
Trim sets for interior mortise locks with spindle, no lock included. 2 1/4” center-to-center. (Shown)
2 1/2” or 2 3/4” backset standard.Custom backsets available. Call for options and pricing.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.
Complete sets with interior mortise lock and spindle. 2 7/8” center-to-center.
Trim sets for interior mortise locks with spindle, no lock included. 2 7/8” center-to-center.
N955 NOVUS INTERIOR MORTISE LOCK PASSAGE & PRIVACY SETS
Specify manufacturer & function of interior mortise lock.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.
CS-N955IML – Complete passage set with interior
mortise lock and spindle. OR TS-N955IML – Trim set only. No lock.
CS-N955IML-PR – Complete privacy set with interior
mortise lock and spindle. OR TS-N955IML-PR – Trim set only. No lock.
TS-N955IML-FD – Trim set only. – Full dummy.
TS-N955IML-HD – Trim set only. – Half dummy.
10"
3" 3"
10"
3" 3"
10"
3" 3"
10"
3"
3 1/
4"
3 1/
4"
3 1/
4"
3 1/
4"
3 1/
4"
3 1/
4"
2 1/
4"
3 1/
4"2
1/4"
CS-N955IML Passage set. P-N955 (ext) P-N955 (int)CS-N955IML-PR Privacy set. P-N955IML-ERC (ext) P-N955IML-TPC (int)TS-N955IML-FD Full dummy. P-N955D (ext) P-N955D (int)TS-N955IML-HD Half dummy. P-N955D
CS-N955-8IML Passage set. P-N955 (ext) P-N955 (int)CS-N955-8IML-PR Privacy set. P-N955-8IML-ERC (ext) P-N955-8IML-TPC (int)
TS-N955IML Passage set. P-N955 (ext) P-N955 (int)TS-N955IML-PR Privacy set. P-N955IML-ERC (ext) P-N955IML-TPC (int)TS-N955IML-FD Full dummy. P-N955D (ext) P-N955D (int)TS-N955IML-HD Half dummy. P-N955D
TS-N955-8IML Passage set. P-N955 (ext) P-N955 (int)TS-N955-8IML-PR Privacy set. P-N955-8IML-ERC (ext) P-N955-8IML-TPC (int)
Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m
PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.
14-250
Revised 02/08/16
Illustrations are for demonstration purposes only. Any knob, lever or ring pull can be combined with any style or size escutcheon plate.
Complete sets with interior mortise lock and spindle. 2 1/4” center-to-center. (Shown)
Trim sets for interior mortise locks with spindle, no lock included. 2 1/4” center-to-center. (Shown)
2 1/2” or 2 3/4” backset standard.Custom backsets available. Call for options and pricing.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.
Complete sets with interior mortise lock and spindle. 2 7/8” center-to-center.
Trim sets for interior mortise locks with spindle, no lock included. 2 7/8” center-to-center.
F-N955 NOVUS INTERIOR MORTISE LOCK PASSAGE & PRIVACY SETS
Specify manufacturer & function of interior mortise lock.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.
CS-F-N955IML – Complete passage set with interior
mortise lock and spindle. OR TS-F-N955IML – Trim set only. No lock.
CS-F-N955IML-PR – Complete privacy set with interior
mortise lock and spindle. OR TS-F-N955IML-PR – Trim set only. No lock.
TS-F-N955IML-FD – Trim set only. – Full dummy.
TS-F-N955IML-HD – Trim set only. – Half dummy.
10"
3" 3"
10"
3" 3"
10"
3" 3"
10"
3"
6 3/
4"
2 1/
4"
6 3/
4"
6 3/
4"
6 3/
4"
6 3/
4"
6 3/
4"
CS-F-N955IML Passage set. P-F-N955 (ext) P-F-N955 (int)CS-F-N955IML-PR Privacy set. P-F-N955IML-ERC (ext) P-F-N955IML-TPC (int)TS-F-N955IML-FD Full dummy. P-F-N955D (ext) P-F-N955D (int)TS-F-N955IML-HD Half dummy. P-F-N955D
CS-F-N955-8IML Passage set. P-F-N955 (ext) P-F-N955 (int)CS-F-N955-8IML-PR Privacy set. P-F-N955-8IML-ERC (ext) P-F-N955-8IML-TPC (int)
TS-F-N955IML Passage set. P-F-N955 (ext) P-F-N955 (int)TS-F-N955IML-PR Privacy set. P-F-N955IML-ERC (ext) P-F-N955IML-TPC (int)TS-F-N955IML-FD Full dummy. P-F-N955D (ext) P-F-N955D (int)TS-F-N955IML-HD Half dummy. P-F-N955D
TS-F-N955-8IML Passage set. P-F-N955 (ext) P-F-N955 (int)TS-F-N955-8IML-PR Privacy set. P-F-N955-8IML-ERC (ext) P-NF955-8IML-TPC (int)
Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m
PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.
14-251
Revised 02/08/16
Illustrations are for demonstration purposes only. Any knob, lever or ring pull can be combined with any style or size escutcheon plate.
N957 NOVUS INTERIOR MORTISE LOCK PASSAGE & PRIVACY SETS
Complete sets with interior mortise lock and spindle. 2 1/4” center-to-center. (Shown)
Trim sets for interior mortise locks with spindle, no lock included. 2 1/4” center-to-center. (Shown)
2 1/2” or 2 3/4” backset standard.Custom backsets available. Call for options and pricing.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.
Complete sets with interior mortise lock and spindle. 2 7/8” center-to-center.
Trim sets for interior mortise locks with spindle, no lock included. 2 7/8” center-to-center.
Specify manufacturer & function of interior mortise lock.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.
CS-N957IML – Complete passage set with interior
mortise lock and spindle. OR TS-N57IML – Trim set only. No lock.
CS-N957IML-PR – Complete privacy set with interior
mortise lock and spindle. OR TS-N957IML-PR – Trim set only. No lock.
TS-N957IML-FD – Trim set only. – Full dummy.
TS-N957IML-HD – Trim set only. – Half dummy.
12"
3" 3"
12"
3" 3"
12"
3" 3"
12"
3"
3 1/
2"
3 1/
2"
3 1/
2"
3 1/
2"
3 1/
2"
3 1/
2"
2 1/
4"
3 1/
2"2
1/4"
CS-N957IML Passage set. P-N957 (ext) P-N957 (int)CS-N957IML-PR Privacy set. P-N957IML-ERC (ext) P-N957IML-TPC (int)TS-N957IML-FD Full dummy. P-N957D (ext) P-N957D (int)TS-N957IML-HD Half dummy. P-N957D
CS-N957-8IML Passage set. P-N957 (ext) P-N957 (int)CS-N957-8IML-PR Privacy set. P-N957-8IML-ERC (ext) P-N957-8IML-TPC (int)
TS-N957IML Passage set. P-N957 (ext) P-N957 (int)TS-N957IML-PR Privacy set. P-N957IML-ERC (ext) P-N957IML-TPC (int)TS-N957IML-FD Full dummy. P-N957D (ext) P-N957D (int)TS-N957IML-HD Half dummy. P-N957D
TS-N957-8IML Passage set. P-N957 (ext) P-N957 (int)TS-N957-8IML-PR Privacy set. P-N957-8IML-ERC (ext) P-N957-8IML-TPC (int)
Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m
PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.
14-252
Revised 02/08/16
Illustrations are for demonstration purposes only. Any knob, lever or ring pull can be combined with any style or size escutcheon plate.
F-N957 NOVUS INTERIOR MORTISE LOCK PASSAGE & PRIVACY SETS
Complete sets with interior mortise lock and spindle. 2 1/4” center-to-center. (Shown)
Trim sets for interior mortise locks with spindle, no lock included. 2 1/4” center-to-center. (Shown)
2 1/2” or 2 3/4” backset standard.Custom backsets available. Call for options and pricing.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.
Complete sets with interior mortise lock and spindle. 2 7/8” center-to-center.
Trim sets for interior mortise locks with spindle, no lock included. 2 7/8” center-to-center.
Specify manufacturer & function of interior mortise lock.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.
CS-F-N957IML – Complete passage set with interior
mortise lock and spindle. OR TS-F-N957IML – Trim set only. No lock.
CS-F-N957IML-PR – Complete privacy set with interior
mortise lock and spindle. OR TS-F-N957IML-PR – Trim set only. No lock.
TS-F-N957IML-FD – Trim set only. – Full dummy.
TS-F-N957IML-HD – Trim set only. – Half dummy.
12"
3" 3"
12"
3" 3"
12"
3" 3"
12"
3"
8 1/
2"
8 1/
2"
8 1/
2"
8 1/
2"
8 1/
2"
2 1/
4"
8 1/
2"
CS-F-N957IML Passage set. P-F-N957 (ext) P-F-N957 (int)CS-F-N957IML-PR Privacy set. P-F-N957IML-ERC (ext) P-F-N957IML-TPC (int)TS-F-N957IML-FD Full dummy. P-F-N957D (ext) P-F-N957D (int)TS-F-N957IML-HD Half dummy. P-F-N957D
CS-F-N957-8IML Passage set. P-F-N957 (ext) P-F-N957 (int)CS-F-N957-8IML-PR Privacy set. P-F-N957-8IML-ERC (ext) P-F-N957-8IML-TPC (int)
TS-F-N957IML Passage set. P-F-N957 (ext) P-F-N957 (int)TS-F-N957IML-PR Privacy set. P-F-N957IML-ERC (ext) P-F-N957IML-TPC (int)TS-F-N957IML-FD Full dummy. P-F-N957D (ext) P-F-N957D (int)TS-F-N957IML-HD Half dummy. P-F-N957D
TS-F-N957-8IML Passage set. P-F-N957 (ext) P-F-N957 (int)TS-F-N957-8IML-PR Privacy set. P-F-N957-8IML-ERC (ext) P-F-N957-8IML-TPC (int)
Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m
PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.
14-253
Revised 02/08/16
Illustrations are for demonstration purposes only. Any knob, lever or ring pull can be combined with any style or size escutcheon plate.
Complete sets with interior mortise lock and spindle. 2 1/4” center-to-center.
Trim sets for interior mortise locks with spindle, no lock included. 2 1/4” center-to-center.
2 1/2” or 2 3/4” backset standard.Custom backsets available. Call for options and pricing.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.
N979 NOVUS INTERIOR MORTISE LOCK PASSAGE & PRIVACY SETS
Specify manufacturer & function of interior mortise lock.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.
CS-N979IML – Complete passage set with interior
mortise lock and spindle. OR TS-N979IML – Trim set only. No lock.
CS-N979IML-PR – Complete privacy set with interior
mortise lock and spindle. OR TS-N979IML-PR – Trim set only. No lock.
TS-N979IML-FD – Trim set only. – Full dummy.
TS-N79IML-HD – Trim set only. – Half dummy.
6"
1 1/2" 1 1/2"
6"
1 1/2" 1 1/2"
6"
1 1/2" 1 1/2"
6"
1 1/2"
2" 2" 2" 2" 2" 2" 2"
2 1/
4"
2 1/
4"
CS-N979IML Passage set. P-N979OH (ext) P-N979OH (int)
CS-N979IML-PR Privacy set. P-N979OH-IML-ERC (ext) P-N979OH-IML-TPC (int)
TS-N979IML-FD Full dummy. P-N979OH-D (ext) P-N979OH-D (int)
TS-N979IML-HD Half dummy. P-N979OH-D
TS-N979IML Passage set. P-N979OH (ext) P-N979OH (int)
TS-N979IML-PR Privacy set. P-N979OH-IML-ERC (ext) P-N979OH-IML-TPC (int)
TS-N979IML-FD Full dummy. P-N979OH-D (ext) P-N979OH-D (int)
TS-N979IML-HD Half dummy. P-N979OH-D
Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m
PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.
14-254
Revised 02/08/16
Illustrations are for demonstration purposes only. Any knob, lever or ring pull can be combined with any style or size escutcheon plate.
Complete sets with interior mortise lock and spindle. 2 1/4” center-to-center.
Trim sets for interior mortise locks with spindle, no lock included. 2 1/4” center-to-center.
2 1/2” or 2 3/4” backset standard.Custom backsets available. Call for options and pricing.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.
F-N979 NOVUS INTERIOR MORTISE LOCK PASSAGE & PRIVACY SETS
Specify manufacturer & function of interior mortise lock.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.
CS-F-N979IML – Complete passage set with interior
mortise lock and spindle. OR TS-F-N979IML – Trim set only. No lock.
CS-F-N979IML-PR – Complete privacy set with interior
mortise lock and spindle. OR TS-F-N979IML-PR – Trim set only. No lock.
TS-F-N979IML-FD – Trim set only. – Full dummy.
TS-F-N979IML-HD – Trim set only. – Half dummy.
6"
1 1/2" 1 1/2"
6"
1 1/2" 1 1/2"
6"
1 1/2" 1 1/2"
6"
1 1/2"
4"4" 4"4" 4"4" 2 1/
4"
CS-F-N979IML Passage set. P-F-N979OH (ext) P-F-N979OH (int)
CS-F-N979IML-PR Privacy set. P-F-N979OH-IML-ERC (ext) P-F-N979OH-IML-TPC (int)
TS-F-N979IML-FD Full dummy. P-F-N979OH-D (ext) P-F-N979OH-D (int)
TS-F-N979IML-HD Half dummy. P-F-N979OH-D
TS-F-N979IML Passage set. P-F-N979OH (ext) P-F-N979OH (int)
TS-F-N979IML-PR Privacy set. P-F-N979OH-IML-ERC (ext) P-F-N979OH-IML-TPC (int)
TS-F-N979IML-FD Full dummy. P-F-N979OH-D (ext) P-F-N979OH-D (int)
TS-F-N979IML-HD Half dummy. P-F-N979OH-D
Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m
PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.
14-255
Revised 02/08/16
Illustrations are for demonstration purposes only. Any knob, lever or ring pull can be combined with any style or size escutcheon plate.
Complete sets with interior mortise lock and spindle. 2 1/4” center-to-center. (Shown)
Trim sets for interior mortise locks with spindle, no lock included. 2 1/4” center-to-center. (Shown)
Complete sets with interior mortise lock and spindle. 2 7/8” center-to-center.
Trim sets for interior mortise locks with spindle, no lock included. 2 7/8” center-to-center.
2 1/2” or 2 3/4” backset standard.Custom backsets available. Call for options and pricing.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.
N980 NOVUS INTERIOR MORTISE LOCK PASSAGE & PRIVACY SETS
Specify manufacturer & function of interior mortise lock.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.
CS-N980IML – Complete passage set with interior
mortise lock and spindle. OR TS-N980IML – Trim set only. No lock.
CS-N980IML-PR – Complete privacy set with interior
mortise lock and spindle. OR TS-N980IML-PR – Trim set only. No lock.
TS-N980IML-FD – Trim set only. – Full dummy.
TS-N980IML-HD – Trim set only. – Half dummy.
10 1
/2"
1 1/2" 1 1/2"
10 1
/2"
1 1/2" 1 1/2"
10 1
/2"
1 1/2" 1 1/2"
10 1
/2"
1 1/2"
4" 4" 4" 4" 4" 4"
2 1/
4"
4"2
1/4"
CS-N980IML Passage set. P-N980 (ext) P-N980 (int)CS-N980IML-PR Privacy set. P-N980IML-ERC (ext) P-N980IML-TPC (int)TS-N980IML-FD Full dummy. P-N980D (ext) P-N980D (int)TS-N980IML-HD Half dummy. P-N980D
CS-N980-8IML Passage set. P-N980 (ext) P-N980 (int)CS-N980-8IML-PR Privacy set. P-N980-8IML-ERC (ext) P-N980-8IML-TPC (int)
TS-N980IML Passage set. P-N980 (ext) P-N980 (int)TS-N980IML-PR Privacy set. P-N980IML-ERC (ext) P-N980IML-TPC (int)TS-N980IML-FD Full dummy. P-N980D (ext) P-N980D (int)TS-N980IML-HD Half dummy. P-N980D
TS-N980-8IML Passage set. P-N980 (ext) P-N980 (int)TS-N980-8IML-PR Privacy set. P-N980-8IML-ERC (ext) P-N980-8IML-TPC (int)
Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m
PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.
14-256
Revised 02/08/16
Illustrations are for demonstration purposes only. Any knob, lever or ring pull can be combined with any style or size escutcheon plate.
Complete sets with interior mortise lock and spindle. 2 1/4” center-to-center. (Shown)
Trim sets for interior mortise locks with spindle, no lock included. 2 1/4” center-to-center. (Shown)
Complete sets with interior mortise lock and spindle. 2 7/8” center-to-center.
Trim sets for interior mortise locks with spindle, no lock included. 2 7/8” center-to-center.
2 1/2” or 2 3/4” backset standard.Custom backsets available. Call for options and pricing.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.
F-N980 NOVUS INTERIOR MORTISE LOCK PASSAGE & PRIVACY SETS
Specify manufacturer & function of interior mortise lock.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.
CS-F-N980IML – Complete passage set with interior
mortise lock and spindle. OR TS-F-N980IML – Trim set only. No lock.
CS-F-N980IML-PR – Complete privacy set with interior
mortise lock and spindle. OR TS-F-N980IML-PR – Trim set only. No lock.
TS-F-N980IML-FD – Trim set only. – Full dummy.
TS-F-N980IML-HD – Trim set only. – Half dummy.
10 1
/2"
1 1/2" 1 1/2"
10 1
/2"
1 1/2" 1 1/2"
10 1
/2"
1 1/2" 1 1/2"
10 1
/2"
1 1/2"
6 1/
2"
6 1/
2"
6 1/
2"
6 1/
2"
6 1/
2"
6 1/
2"
2 1/
4"
CS-F-N980IML Passage set. P-F-N980 (ext) P-F-N980 (int)CS-F-N980IML-PR Privacy set. P-F-N980IML-ERC (ext) P-F-N980IML-TPC (int)TS-F-N980IML-FD Full dummy. P-F-N980D (ext) P-F-N980D (int)TS-F-N980IML-HD Half dummy. P-F-N980D
CS-F-N980-8IML Passage set. P-F-N980 (ext) P-F-N980 (int)CS-F-N980-8IML-PR Privacy set. P-F-N980-8IML-ERC (ext) P-F-N980-8IML-TPC (int)
TS-F-N980IML Passage set. P-F-N980 (ext) P-F-N980 (int)TS-F-N980IML-PR Privacy set. P-F-N980IML-ERC (ext) P-F-N980IML-TPC (int)TS-F-N980IML-FD Full dummy. P-F-N980D (ext) P-F-N980D (int)TS-F-N980IML-HD Half dummy. P-F-N980D
TS-F-N980-8IML Passage set. P-F-N980 (ext) P-F-N980 (int)TS-F-N980-8IML-PR Privacy set. P-F-N980-8IML-ERC (ext) P-F-N980-8IML-TPC (int)
Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m
PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.
14-257
Revised 02/08/16
Illustrations are for demonstration purposes only. Any knob, lever or ring pull can be combined with any style or size escutcheon plate.
2406 RIDGE BURLAP INTERIOR MORTISE LOCK PASSAGE & PRIVACY SETS
Complete sets with interior mortise lock and spindle. 2 1/4” center-to-center.
Trim sets for interior mortise locks with spindle, no lock included. 2 1/4” center-to-center.
2 1/2” or 2 3/4” backset standard.Custom backsets available. Call for options and pricing.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.
Specify manufacturer & function of interior mortise lock.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.
CS-2406IML – Complete passage set with interior
mortise lock and spindle. OR TS-2406IML – Trim set only. No lock.
CS-2406IML-PR – Complete privacy set with interior
mortise lock and spindle. OR TS-2406IML-PR – Trim set only. No lock.
TS-2406IML-FD – Trim set only. – Full dummy.
TS-2406IML-HD – Trim set only. – Half dummy.
6"2 1/2" 2 1/2"
6"
2 1/2" 2 1/2"
6"
2 1/2" 2 1/2"
6"
2 1/2"
2 1/
16"
2 1/
16"
2 1/
16"
2 1/
16"
2 1/
16"
2 1/
16"2
1/4"
2 1/
16" 2
1/4
"
CS-2406IML Passage set. P-2406OH (ext) P-2406OH (int)
CS-2406IML-PR Privacy set. P-2406OH-IML-ERC (ext) P-2406OH-IML-TPC (int)
TS-2406IML-FD Full dummy. P-2406OH-D (ext) P-2406OH-D (int)
TS-2406IML-HD Half dummy. P-2406OH-D
TS-2406IML Passage set. P-2406OH (ext) P-2406OH (int)
TS-2406IML-PR Privacy set. P-2406OH-IML-ERC (ext) P-2406OH-IML-TPC (int)
TS-2406IML-FD Full dummy. P-2406OH-D (ext) P-2406OH-D (int)
TS-2406IML-HD Half dummy. P-2406OH-D
Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m
PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.
14-258
Revised 02/08/16
Illustrations are for demonstration purposes only. Any knob, lever or ring pull can be combined with any style or size escutcheon plate.
F2406 RIDGE BURLAP INTERIOR MORTISE LOCK PASSAGE & PRIVACY SETS
Complete sets with interior mortise lock and spindle. 2 1/4” center-to-center.
Trim sets for interior mortise locks with spindle, no lock included. 2 1/4” center-to-center.
2 1/2” or 2 3/4” backset standard.Custom backsets available. Call for options and pricing.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.
Specify manufacturer & function of interior mortise lock.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.
CS-F2406IML – Complete passage set with interior
mortise lock and spindle. OR TS-F2406IML – Trim set only. No lock.
CS-F2406IML-PR – Complete privacy set with interior
mortise lock and spindle. OR TS-F2406IML-PR – Trim set only. No lock.
TS-F2406IML-FD – Trim set only. – Full dummy.
TS-F2406IML-HD – Trim set only. – Half dummy.
6"2 1/2" 2 1/2"
6"
2 1/2" 2 1/2"
6"
2 1/2" 2 1/2"
6"
2 1/2"
3 15
/16"
3 15
/16"
3 15
/16"
3 15
/16"
3 15
/16"
3 15
/6"
2 1/
4"
CS-F2406IML Passage set. P-F2406OH (ext) P-F2406OH (int)
CS-F2406IML-PR Privacy set. P-F2406OH-IML-ERC (ext) P-F2406OH-IML-TPC (int)
TS-F2406IML-FD Full dummy. P-F2406OH-D (ext) P-F2406OH-D (int)
TS-F2406IML-HD Half dummy. P-F2406OH-D
TS-F2406IML Passage set. P-F2406OH (ext) P-F2406OH (int)
TS-F2406IML-PR Privacy set. P-F2406OH-IML-ERC (ext) P-F2406OH-IML-TPC (int)
TS-F2406IML-FD Full dummy. P-F2406OH-D (ext) P-F2406OH-D (int)
TS-F2406IML-HD Half dummy. P-F2406OH-D
Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m
PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.
14-259
Revised 02/08/16
Illustrations are for demonstration purposes only. Any knob, lever or ring pull can be combined with any style or size escutcheon plate.
2408 RIDGE BURLAP INTERIOR MORTISE LOCK PASSAGE & PRIVACY SETS
Complete sets with interior mortise lock and spindle. 2 1/4” center-to-center. (Shown).
Trim sets for interior mortise locks with spindle, no lock included. 2 1/4” center-to-center. (Shown)
2 1/2” or 2 3/4” backset standard.Custom backsets available. Call for options and pricing.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.
Complete sets with interior mortise lock and spindle. 2 7/8” center-to-center.
Trim sets for interior mortise locks with spindle, no lock included. 2 7/8” center-to-center.
Specify manufacturer & function of interior mortise lock.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.
CS-2408IML – Complete passage set with interior
mortise lock and spindle. OR TS-2408IML – Trim set only. No lock.
CS-2408IML-PR – Complete privacy set with interior
mortise lock and spindle. OR TS-2408IML-PR – Trim set only. No lock.
TS-2408IML-FD – Trim set only. – Full dummy.
TS-2408IML-HD – Trim set only. – Half dummy.
8 3/
4"2 1/2" 2 1/2"
8 3/
4"
2 1/2" 2 1/2"
8 3/
4"
2 1/2" 2 1/2"
8 3/
4"
2 1/2"
2 3/
4"
2 3/
4"
2 3/
4"
2 3/
4"
2 3/
4"
2 3/
4"
2 1/
4"
2 3/
4"2
1/4"
CS-2408IML Passage set. P-2408 (ext) P-2408 (int)CS-2408IML-PR Privacy set. P-2408IML-ERC (ext) P-2408IML-TPC (int)TS-2408IML-FD Full dummy. P-2408D (ext) P-2408D (int)TS-2408IML-HD Half dummy. P-2408D
CS-2408-8IML Passage set. P-2408 (ext) P-2408 (int)CS-2408-8IML-PR Privacy set. P-2408-8IML-ERC (ext) P-2408-8IML-TPC (int)
TS-2408IML Passage set. P-2408 (ext) P-2408 (int)TS-2408IML-PR Privacy set. P-2408IML-ERC (ext) P-2408IML-TPC (int)TS-2408IML-FD Full dummy. P-2408D (ext) P-2408D (int)TS-2408IML-HD Half dummy. P-2408D
TS-2408-8IML Passage set. P-2408 (ext) P-2408 (int)TS-2408-8IML-PR Privacy set. P-2408-8IML-ERC (ext) P-2408-8IML-TPC (int)
Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m
PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.
14-260
Revised 02/08/16
Illustrations are for demonstration purposes only. Any knob, lever or ring pull can be combined with any style or size escutcheon plate.
F2408 RIDGE BURLAP INTERIOR MORTISE LOCK PASSAGE & PRIVACY SETS
Complete sets with interior mortise lock and spindle. 2 1/4” center-to-center. (Shown).
Trim sets for interior mortise locks with spindle, no lock included. 2 1/4” center-to-center. (Shown)
2 1/2” or 2 3/4” backset standard.Custom backsets available. Call for options and pricing.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.
Complete sets with interior mortise lock and spindle. 2 7/8” center-to-center.
Trim sets for interior mortise locks with spindle, no lock included. 2 7/8” center-to-center.
Specify manufacturer & function of interior mortise lock.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.
CS-F2408IML – Complete passage set with interior
mortise lock and spindle. OR TS-F2408IML – Trim set only. No lock.
CS-F2408IML-PR – Complete privacy set with interior
mortise lock and spindle. OR TS-F2408IML-PR – Trim set only. No lock.
TS-F2408IML-FD – Trim set only. – Full dummy.
TS-F2408IML-HD – Trim set only. – Half dummy.
8 3/
4"
2 1/2" 2 1/2"
8 3/
4"
2 1/2" 2 1/2"
8 3/
4"
2 1/2" 2 1/2"
8 3/
4"
2 1/2"
6"6" 6"6" 6"6"
2 1/
4"
CS-F2408IML Passage set. P-F2408 (ext) P-F2408 (int)CS-F2408IML-PR Privacy set. P-F2408IML-ERC (ext) P-F2408IML-TPC (int)TS-F2408IML-FD Full dummy. P-F2408D (ext) P-F2408D (int)TS-F2408IML-HD Half dummy. P-F2408D
CS-F2408-8IML Passage set. P-F2408 (ext) P-F2408 (int)CS-F2408-8IML-PR Privacy set. P-F2408-8IML-ERC (ext) P-F2408-8IML-TPC (int)
TS-F2408IML Passage set. P-F2408 (ext) P-F2408 (int)TS-F2408IML-PR Privacy set. P-F2408IML-ERC (ext) P-F2408IML-TPC (int)TS-F2408IML-FD Full dummy. P-F2408D (ext) P-F2408D (int)TS-F2408IML-HD Half dummy. P-F2408D
TS-F2408-8IML Passage set. P-F2408 (ext) P-F2408 (int)TS-F2408-8IML-PR Privacy set. P-F2408-8IML-ERC (ext) P-F2408-8IML-TPC (int)
Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m
PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.
14-261
Revised 02/08/16
Illustrations are for demonstration purposes only. Any knob, lever or ring pull can be combined with any style or size escutcheon plate.
2410 RIDGE BURLAP INTERIOR MORTISE LOCK PASSAGE & PRIVACY SETS
Complete sets with interior mortise lock and spindle. 2 1/4” center-to-center. (Shown)
Trim sets for interior mortise locks with spindle, no lock included. 2 1/4” center-to-center. (Shown)
2 1/2” or 2 3/4” backset standard.Custom backsets available. Call for options and pricing.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.
Complete sets with interior mortise lock and spindle. 2 7/8” center-to-center.
Trim sets for interior mortise locks with spindle, no lock included. 2 7/8” center-to-center.
Specify manufacturer & function of interior mortise lock.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.
CS-2410IML – Complete passage set with interior
mortise lock and spindle. OR TS-2410IML – Trim set only. No lock.
CS-2410IML-PR – Complete privacy set with interior
mortise lock and spindle. OR TS-2410IML-PR – Trim set only. No lock.
TS-2410IML-FD – Trim set only. – Full dummy.
TS-2410IML-HD – Trim set only. – Half dummy.
10"
3" 3"
10"
3" 3"
10"
3" 3"
10"
3"
3 1/
4"
3 1/
4"
3 1/
4"
3 1/
4"
3 1/
4"
3 1/
4"
2 1/
4"
3 1/
4"2
1/4"
CS-2410IML Passage set. P-2410 (ext) P-2410 (int)CS-2410IML-PR Privacy set. P-2410IML-ERC (ext) P-2410IML-TPC (int)TS-2410IML-FD Full dummy. P-2410D (ext) P-2410D (int)TS-2410IML-HD Half dummy. P-2410D
CS-2410-8IML Passage set. P-2410 (ext) P-2410 (int)CS-2410-8IML-PR Privacy set. P-2410-8IML-ERC (ext) P-2410-8IML-TPC (int)
TS-2410IML Passage set. P-2410 (ext) P-2410 (int)TS-2410IML-PR Privacy set. P-2410IML-ERC (ext) P-2410IML-TPC (int)TS-2410IML-FD Full dummy. P-2410D (ext) P-2410D (int)TS-2410IML-HD Half dummy. P-2410D
TS-2410-8IML Passage set. P-2410 (ext) P-2410 (int)TS-2410-8IML-PR Privacy set. P-2410-8IML-ERC (ext) P-2410-8IML-TPC (int)
Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m
PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.
14-262
Revised 02/08/16
Illustrations are for demonstration purposes only. Any knob, lever or ring pull can be combined with any style or size escutcheon plate.
F2410 RIDGE BURLAP INTERIOR MORTISE LOCK PASSAGE & PRIVACY SETS
Complete sets with interior mortise lock and spindle. 2 1/4” center-to-center. (Shown)
Trim sets for interior mortise locks with spindle, no lock included. 2 1/4” center-to-center. (Shown)
2 1/2” or 2 3/4” backset standard.Custom backsets available. Call for options and pricing.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.
Complete sets with interior mortise lock and spindle. 2 7/8” center-to-center.
Trim sets for interior mortise locks with spindle, no lock included. 2 7/8” center-to-center.
Specify manufacturer & function of interior mortise lock.Door handing and thickness is required for all interior mortise lock passage & privacy sets.Always specify lever/knob design.
CS-F2410IML – Complete passage set with interior
mortise lock and spindle. OR TS-F2410IML – Trim set only. No lock.
CS-F2410IML-PR – Complete privacy set with interior
mortise lock and spindle. OR TS-F2410IML-PR – Trim set only. No lock.
TS-F2410IML-FD – Trim set only. – Full dummy.
TS-F2410IML-HD – Trim set only. – Half dummy.
10"
3" 3"
10"
3" 3"
10"
3" 3"
10"
3"
6 3/
4"
6 3/
4"
6 3/
4"
6 3/
4"
6 3/
4"
2 1/
4"
6 3/
4"
CS-F2410IML Passage set. P-F2410 (ext) P-F2410 (int)CS-F2410IML-PR Privacy set. P-F2410IML-ERC (ext) P-F2410IML-TPC (int)TS-F2410IML-FD Full dummy. P-F2410D (ext) P-F2410D (int)TS-F2410IML-HD Half dummy. P-F2410D
CS-F2410-8IML Passage set. P-F2410 (ext) P-F2410 (int)CS-F2410-8IML-PR Privacy set. P-F2410-8IML-ERC (ext) P-F2410-8IML-TPC (int)
TS-F2410IML Passage set. P-F2410 (ext) P-F2410 (int)TS-F2410IML-PR Privacy set. P-F2410IML-ERC (ext) P-F2410IML-TPC (int)TS-F2410IML-FD Full dummy. P-F2410D (ext) P-F2410D (int)TS-F2410IML-HD Half dummy. P-F2410D
TS-F2410-8IML Passage set. P-F2410 (ext) P-F2410 (int)TS-F2410-8IML-PR Privacy set. P-F2410-8IML-ERC (ext) P-F2410-8IML-TPC (int)