+ All Categories
Home > Documents > Spec 24G Cabinet Hardware

Spec 24G Cabinet Hardware

Date post: 25-Jul-2016
Category:
Upload: sun-valley-bronze
View: 224 times
Download: 1 times
Share this document with a friend
Description:
 
69
Tel 208.788.3631 • Toll Free 866.788.3631 • Fax 208.788.1306 • www.sunvalleybronze.com 24-1 CABINET HARDWARE Revised 06/20/16 CONTENTS This section contains cabinet knobs, cabinet pulls, bin pulls and cabinet latches. UC-RP is available for any cabinet knob. 3/32” roll pin offset in base of cabinet knob to prevent knob from spinning. Please call to specify. UC-RP TABLE OF CONTENTS: Cabinet Escutcheons Pages 24-2 – 24-4 Cabinet Knobs Pages 24-5 – 24-20 Cabinet Ring Pulls & Flap Pulls Page 24-21 Cabinet Pulls Pages 24-22 – 24-65 Bin Pulls Pages 24-66 – 24-68 Cabinet Latches Page 24-69 ORDERING INSTRUCTIONS: Cabinet Hardware: See Ordering Instructions in Binder 1/ Dealer Information. Custom Cabinet Hardware: See Custom Ordering Instructions in Binder 1/ Dealer Information.
Transcript
Page 1: Spec 24G Cabinet Hardware

Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m24-1

CABINET HARDWARE

Revised 06/20/16

CONTENTSThis section contains cabinet knobs, cabinet pulls, bin pulls and cabinet latches.

UC-RP is available for any cabinet knob. 3/32” roll pin offset in base of cabinet knob to prevent knob from spinning. Please call to specify.UC-RP

TABLE OF CONTENTS:

Cabinet Escutcheons Pages 24-2 – 24-4

Cabinet Knobs Pages 24-5 – 24-20

Cabinet Ring Pulls & Flap Pulls Page 24-21

Cabinet Pulls Pages 24-22 – 24-65

Bin Pulls Pages 24-66 – 24-68

Cabinet Latches Page 24-69

ORDERING INSTRUCTIONS:

Cabinet Hardware: See Ordering Instructions in Binder 1/ Dealer Information. Custom Cabinet Hardware: See Custom Ordering Instructions in Binder 1/ Dealer Information.

Page 2: Spec 24G Cabinet Hardware

Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m

PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.

24-2

Revised 06/20/16

Illustrations are for demonstration purposes only.

Bevel Edge cabinet knob escutcheons.

BEVEL EDGE CABINET KNOB ESCUTCHEONS

1 3/8" 1 5/8" 1 3/4" 2" 1 3/4"

1"

CKE-RP138 – Bevel Edge cabinet knob escutcheon.

CKE-RP158 – Bevel Edge cabinet knob escutcheon.

CKE-RP175 – Bevel Edge cabinet knob escutcheon.

CKE-RP200 – Bevel Edge cabinet knob escutcheon.

CKE-OP175 – Bevel Edge cabinet knob escutcheon.

1"

1"

1 5/8"1

5/8"

2"

CKE-1 – Bevel Edge cabinet knob escutcheon.

CKE-158 – Bevel Edge cabinet knob escutcheon.

CKE-175 – Bevel Edge cabinet knob escutcheon.

CKE-200 – Bevel Edge cabinet knob escutcheon.

1 3/

4"

1 3/4" 2"1 3/8"

1 3/

8"

CKE-138 – Bevel Edge cabinet knob escutcheon.

2 7/8"

CKE-DRB-4 – Bevel edge cabinet knob escutcheon.

CKE-160 – Bevel Edge cabinet knob escutcheon.

1"

6"

1 1/

4"

CKE-RP138 1 3/8” Bevel Edge round cabinet knob escutcheon.

CKE-RP158 1 5/8” Bevel Edge round cabinet knob escutcheon.

CKE-RP175 1 3/4” Bevel Edge round cabinet knob escutcheon.

CKE-RP200 2” Bevel Edge round cabinet knob escutcheon.

CKE-OP175 1 3/4” x 1” Bevel Edge oval cabinet knob escutcheon.

CKE-160 1” x 6” Bevel Edge rectangular cabinet knob escutcheon.

CKE-1 1” Bevel Edge square cabinet knob escutcheon.

CKE-138 1 3/8” Bevel Edge square cabinet knob escutcheon.

CKE-158 1 5/8” Bevel Edge square cabinet knob escutcheon.

CKE-175 1 3/4” Bevel Edge square cabinet knob escutcheon.

CKE-200 2” Bevel Edge square cabinet knob escutcheon.

CKE-DRB-4 1 1/4” x 3 1/4” Bevel edge cabinet knob escutcheon.

Page 3: Spec 24G Cabinet Hardware

Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m

PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.

24-3

Revised 06/20/16

Illustrations are for demonstration purposes only.

CONTEMPORARY CABINET KNOB ESCUTCHEONS

Contemporary cabinet knob escutcheons.

1 3/8" 1 5/8" 1 3/4" 2"

CKE-RP9138 – Contemporary cabinet knob escutcheon.

CKE-RP9158 – Contemporary cabinet knob escutcheon.

CKE-RP9175 – Contemporary cabinet knob escutcheon.

CKE-RP9200 – Contemporary cabinet knob escutcheon.

1 5/8"

1 5/

8"

2"

CKE-9158 – Contemporary cabinet knob escutcheon.

CKE-9175 – Contemporary cabinet knob escutcheon.

CKE-9200 – Contemporary cabinet knob escutcheon.

1 3/

4"

1 3/4" 2"1 3/8"

1 3/

8"

CKE-9138 – Contemporary cabinet knob escutcheon.

CKE-DRB-9-3 – Contemporary cabinet knob escutcheon.

1 3/

8"

3"

CKE-RP9138 1 3/8” Contemporary round cabinet knob escutcheon.

CKE-RP9158 1 5/8” Contemporary round cabinet knob escutcheon.

CKE-RP9175 1 3/4” Contemporary round cabinet knob escutcheon.

CKE-RP9200 2” Contemporary round cabinet knob escutcheon.

CKE-9138 1 3/8” Contemporary square cabinet knob escutcheon.

CKE-9158 1 5/8” Contemporary square cabinet knob escutcheon.

CKE-9175 1 3/4” Contemporary square cabinet knob escutcheon.

CKE-9200 2” Contemporary square cabinet knob escutcheon.

CKE-DRB-9-3 1 3/8” x 3” Contemporary cabinet knob escutcheon.

Page 4: Spec 24G Cabinet Hardware

Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m

PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.

24-4

Revised 06/20/16

Illustrations are for demonstration purposes only.

Miscellaneouos abinet knob escutcheons.

MISCELLANEOUS CABINET KNOB ESCUTCHEONS

6 1/4"

1 1/

4"

CKE-FDL – Fleur de Lis cabinet knob escutcheon.

1"

CKE-RP1 – Eased Edge cabinet knob escutcheon.

CKE-RP1 1” Eased Edge round cabinet knob escutcheon.

CKE-FDL 6 1/4” x 1 1/4” Fleur de Lis cabinet knob escutcheon.

Page 5: Spec 24G Cabinet Hardware

Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m

PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.

24-5

Revised 06/20/16

Illustrations are for demonstration purposes only.

1 3/4” Break off screws included.

Oval cabinet knobs.

CK-302 - CK-305 OVAL CABINET KNOBS

CK-302 – Oval cabinet knob.

1 1/

2"

CK-303 – Oval cabinet knob.

1 1/4"1 1/4"

1 1/

2"

CK-305 – Oval cabinet knob.

1" 1 3/4"

2"

1 3/8"1 1/4"

CK-302 1” x 1 1/2” Oval cabinet knob.

CK-303 1 1/4” x 1 1/2” Oval cabinet knob.

CK-305 1 3/8” x 2” Oval cabinet knob.

Page 6: Spec 24G Cabinet Hardware

Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m

PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.

24-6

Revised 06/20/16

Illustrations are for demonstration purposes only.

1 3/4” Break off screws included.

Mushroom cabinet knobs.

CK-400 – CK-405 MUSHROOM CABINET KNOBS

CK-402 – Mushroom cabinet knob.

1 1/8"

1 1/

8"

CK-403 – Mushroom cabinet knob.

1 1/8"

1 1/

4"

CK-404 – Mushroom cabinet knob.

1 3/8"

1 3/

8"

CK-405 – Mushroom cabinet knob.

1 3/8"

1 1/

2"

CK-401 – Mushroom cabinet knob.

CK-400 – Mushroom cabinet knob.

1 1/8"1"

7/8"

3/4"

CK-400 3/4” Mushroom cabinet knob.

CK-401 1” Mushroom cabinet knob.

CK-402 1 1/8” Mushroom cabinet knob.

CK-403 1 1/4” Mushroom cabinet knob.

CK-404 1 3/8” Mushroom cabinet knob.

CK-405 1 1/2” Mushroom cabinet knob.

Page 7: Spec 24G Cabinet Hardware

Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m

PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.

24-7

Revised 06/20/16

Illustrations are for demonstration purposes only.

1 3/4” Break off screws included.

Flared cabinet knobs.

CK-450 – CK-451 FLARED CABINET KNOBS

CK-450 – Flared cabinet knob.

7/8"

1"

CK-451 – Flared cabinet knob.

1 1/8"

1 1/

4"

CK-450 1” Flared cabinet knob.

CK-451 1 1/4” Flared cabinet knob.

Page 8: Spec 24G Cabinet Hardware

Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m

PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.

24-8

Revised 06/20/16

Illustrations are for demonstration purposes only.

1 3/4” Break off screws included.

Square cabinet knobs.

CK-522 – CK-525 SQUARE CABINET KNOBS

1 1/

2"

1 1/4"

CK-525 – Square cabinet knob.

3/4"

3/4"

CK-522 – Square cabinet knob.

1 1/

4"

1"

CK-524 – Square cabinet knob.

1"

1"

CK-522.5 – Square cabinet knob.

CK-522 3/4” Square cabinet knob.

CK-522.5 1” Square cabinet knob.

CK-524 1 1/4” Square cabinet knob.

CK-525 1 1/2” Square cabinet knob.

Page 9: Spec 24G Cabinet Hardware

Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m

PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.

24-9

Revised 06/20/16

Illustrations are for demonstration purposes only.

1 3/4” Break off screws included.

Contemporary cabinet knobs.

CK-417 – CK-453 CONTEMPORARY CABINET KNOBS

CK-417LS – Contemporary round flat cabinet knob.

CK-419 – Contemporary octagonal cabinet knob.

CK-422 – Contemporary square flat cabinet knob.

1 1/4"

1 1/

4"

1 1/8"1 1/4"

1 3/

4"

1"

1 1/

4"

CK-453 – Dowel style cabinet knob.

1 1/8"

3/4"

CK-452 – Dowel style cabinet knob.

1 1/4"

1"

CK-417 – Contemporary round flat cabinet knob.

1"

1 1/

4"

CK-417 1 1/4” Contemporary round flat cabinet knob.

CK-417LS 1 1/4” Contemporary round flat cabinet knob.

CK-419 1 1/8” x 1 3/4” Contemporary octagonal cabinet knob.

CK-422 1 1/4” Contemporary square flat cabinet knob.

CK-452 1” Dowel style cabinet knob.

CK-453 3/4” Dowel style cabinet knob.

Page 10: Spec 24G Cabinet Hardware

Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m

PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.

24-10

Revised 06/20/16

Illustrations are for demonstration purposes only.

1 3/4” Break off screws included.

Contemporary cabinet knobs.

CK-460, CK-9101 – CK-9102 CONTEMPORARY CABINET KNOBS

CK-9101 – Contemporary cabinet knob.

CK-9102 – Contemporary cabinet knob.

1 1/2"1 3/8" 1 1/2"1 3/8"

1/2"

1/4"

1/2"

15/1

6" 1/2"

1/4"

CK-460 – Contemporary aero cabinet knob.

1 1/16"

1 3/

16"

7/16"

CK-460 7/16” x 1 3/16” Contemporary aero cabinet knob.

CK-9101 1 1/2” Contemporary cabinet knob.

CK-9102 1 1/2” Contemporary cabinet knob, off-center.

Page 11: Spec 24G Cabinet Hardware

Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m

PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.

24-11

Revised 06/20/16

Illustrations are for demonstration purposes only.

Ridge cabinet knobs.

1 3/4” Break off screws included.

CK-306, CK-406 – CK-409 RIDGE CABINET KNOBS

CK-306 – Ridge oval cabinet knob.

1"1 1/2"

1 3/

8"

CK-406 – Ridge round cabinet knob.

1 3/8"1 3/8"

CK-408 – Ridge round cabinet knob.

1 1/4"1 3/8"

CK-407 – Multi-Ridge round cabinet knob.

1 3/8" 1 1/2"

CK-409 – Ridge flared cabinet knob.

7/8" 5/8"

CK-306 1” x 1 3/8” Ridge oval cabinet knob.

CK-406 1 3/8” Ridge round cabinet knob.

CK-407 1 1/2” Multi-Ridge round cabinet knob.

CK-408 1 1/4” Ridge round cabinet knob.

CK-409 5/8” Ridge flared cabinet knob.

Page 12: Spec 24G Cabinet Hardware

Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m

PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.

24-12

Revised 06/20/16

Illustrations are for demonstration purposes only.

1 3/4” Break off screws included.

Hand Peened cabinet knobs.

CK-HP306, CK-HP406 – CK-HP408 HAND PEENED CABINET KNOBS

CK-HP306 – Hand Peened oval cabinet knob.

1"1 1/2"

1 3/

8"

CK-HP406 – Hand Peened round cabinet knob.

1 3/8"1 3/8"

CK-HP408 – Hand Peened round cabinet knob.

1 1/4"1 3/8"

CK-HP306 1” x 1 3/8” Hand Peened oval cabinet knob.

CK-HP406 1 3/8” Hand Peened round cabinet knob.

CK-HP408 1 1/4” Hand Peened round cabinet knob.

Page 13: Spec 24G Cabinet Hardware

Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m

PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.

24-13

Revised 06/20/16

Illustrations are for demonstration purposes only.

CK-230 ARTICHOKE CABINET KNOBS

1 3/4” Break off screws included.

Artichoke cabinet knobs.

CK-230 – Artichoke round cabinet knob.

1 7/16"

1 3/

8"

CK-230 1 3/8” Artichoke round cabinet knob.

Page 14: Spec 24G Cabinet Hardware

Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m

PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.

24-14

Revised 06/20/16

Illustrations are for demonstration purposes only.

1 3/4” Break off screws included.

Corduroy cabinet knobs.

CK-420 – CK-425 CORDUROY CABINET KNOBS

CK-420 – Corduroy round flat cabinet knob.

CK-425 – Corduroy square flat cabinet knob.

1"

1 1/

4"

1"

1 1/

4"

CK-420 1 1/4” Corduroy round flat cabinet knob.

CK-425 1 1/4” Corduroy square flat cabinet knob.

Page 15: Spec 24G Cabinet Hardware

Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m

PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.

24-15

Revised 06/20/16

Illustrations are for demonstration purposes only.

1 3/4” Break off screws included.

Giro cabinet knobs.

CK-430 – CK-431 GIRO CABINET KNOBS

CK-430 – Giro round cabinet knob.

CK-431 – Giro oval cabinet knob.

1 3/8"

1 3/

8"

1 1/4"

1 9/

16"

1 1/8"

CK-430 1 3/8” Giro round cabinet knob.

CK-431 1 1/8” x 1 9/16” Giro oval cabinet knob.

Page 16: Spec 24G Cabinet Hardware

Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m

PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.

24-16

Revised 06/20/16

Illustrations are for demonstration purposes only.

1 3/4” Break off screws included.

Stone cabinet knobs.

CK-432 – CK-433 STONE CABINET KNOBS

CK-432 – Stone round cabinet knob.

CK-433 – Stone round cabinet knob.

1"

1 1/

4"

1 3/

8"

1"

CK-432 1 1/4” Stone round cabinet knob.

CK-433 1 3/8” Stone round cabinet knob.

Page 17: Spec 24G Cabinet Hardware

Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m

PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.

24-17

Revised 06/20/16

Illustrations are for demonstration purposes only.

Inlay cabinet knobs.

Sun Valley Bronze uses ipe hardwood unless specified otherwise. Any hardwood may be supplied at no extra charge.Note: Inlay is available in W1 and S1 finishes only.

1 3/4” Break off screws included.

CK-W417 INLAY CABINET KNOBS

CK-W417 – Inlay round cabinet knob.

1"

1 1/

4"

1/4"

CK-W417 1 1/4” inlay round cabinet knob.

Page 18: Spec 24G Cabinet Hardware

Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m

PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.

24-18

Revised 06/20/16

Illustrations are for demonstration purposes only.

1 3/4” Break off screws included.

T-handle cabinet knobs.

T-handle cabinet knobs w/roll pin.

CK-227T – CK-229T T-HANDLE CABINET KNOBS

CK-228T – T-handle cabinet knob.

2"

4"4"

4 1/

2"

7/8"

CK-227T – T-handle cabinet knob.

CK-229T – T-handle cabinet knob.

7/8"

7/8"

5/8" 5/8" 5/8"

9/16"1/2"

1/2"

1/2"

3/4"

2" 2"

CK-227T 4” T-handle cabinet knob.

CK-228T 4” T-handle cabinet knob.

CK-229T 4 1/2” T-handle cabinet knob.

CK-227T-RP 4” T- handle cabinet knob w/3/32” roll pin off-set to prevent spinning.

CK-228T-RP 4” T- handle cabinet knob w/3/32” roll pin off-set to prevent spinning.

CK-229T-RP 4 1/2” T- handle cabinet knob w/3/32” roll pin off-set to prevent spinning.

Page 19: Spec 24G Cabinet Hardware

Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m

PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.

24-19

Revised 06/20/16

Illustrations are for demonstration purposes only.

1 3/4” Break off screws included.

Bamboo cabinet knobs.

CK-1302 BAMBOO CABINET KNOBS

CK-1302 – Bamboo cabinet T-knob.

1 3/8"

2 1/

4"

7/16"

7/8"

CK-1302 7/16” x 2 1/4” Bamboo cabinet T-knob.

Page 20: Spec 24G Cabinet Hardware

Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m

PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.

24-20

Revised 06/20/16

Illustrations are for demonstration purposes only.

GLASS COLOR OPTIONS:

Clear

Feldspar

Cinnebar

Coral

Ruby

Jade

Lapis

Cobalt

Obsidian

Florette

1 3/4” Break off screws included.

Art glass cabinet knobs.

CK-R800, CK-RF800, CK-M800 ART GLASS CABINET KNOBS

CK-RF800 SERIES – Round flat knob. – Specify glass color.

CK-M800 SERIES – Mushroom knob, – Specify glass color.

CK-R800 SERIES – Contemporary post. – Specify glass color.

1 1/4"1 3/16" 1 1/4"1 1/2"1 1/4"2"

CK-R800 1 1/4” Round art glass cabinet knob. Specify glass color.

CK-RF800 1 1/4” Round flat art glass cabinet knob. Specify glass color.

CK-M800 1 1/4” Mushroom art glass cabinet knob. Specify glass color.

Page 21: Spec 24G Cabinet Hardware

Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m

PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.

24-21

Revised 06/20/16

Illustrations are for demonstration purposes only.

1 3/4” Break off screws included.

Cabinet ring pulls and flap pulls.

CK-101, CK-520 – CK-523 CABINET RING PULLS & FLAP PULLS

CK-520 – Cabinet flap pull.

CK-101 – Cabinet ring pull.

CK-523 – Cabinet ring pull.

CK-521 – Cabinet ring pull.

1 3/8"

1 3/

4"

1"

2"

1 7/8"

2 3/

4"

1 7/8"

2 3/

4"

CK-101 1 3/8” x 1 3/4” Cabinet ring pull w/ 7/8” projection.

CK-520 1” x 2” Cabinet flap pull w/3/8” projection.

CK-521 1 7/8” x 2 3/4” Cabinet ring pull w/3/8” projection.

CK-523 1 7/8” x 2 3/4” Cabinet ring pull w/3/8” projection.

Page 22: Spec 24G Cabinet Hardware

Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m

PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.

24-22

Revised 06/20/16

Illustrations are for demonstration purposes only.

Round foot cabinet pulls.

1 3/4” Break off screws included.

CK-509 – CK-511 ROUND FOOT CABINET PULLS

4 1/

8"

CK-510 – Round foot cabinet pull. – 3 3/4" center-to-center. – 1/2" face width.

CK-509 – Round foot cabinet pull. – 3" center-to-center. – 1/2" face width.

CK-511 – Round foot cabinet pull. – 4 7/8" center-to-center. – 1/2" face width.

4 7/

8"

6"

1 3/8" 15/16"1 3/8" 15/16"

1 3/8" 15/16"

5/16" 5/16"5/16"

CK-510.12 – Round foot cabinet pull. – 12" center-to-center. – 1/2" face width.

1 3/8"

13 1

/8"

15/16"

5/16"

CK-510.14 – Round foot cabinet pull. – 14" center-to-center. – 1/2" face width.

1 3/8"

15 1

/8"

15/16"

5/16"

CK-509 4 1/8” Round foot cabinet pull. 3” center-to-center.

CK-510 4 7/8” Round foot cabinet pull. 3 3/4” center-to-center.

CK-510.12 13 1/8” Round foot cabinet pull. 12” center-to-center.

CK-510.14 15 1/8” Round foot cabinet pull. 14” center-to-center.

CK-510.18 19 1/8” Round foot cabinet pull. 18” center-to-center. (Not shown)

CK-510.24 25 1/8” Round foot cabinet pull. 24 1/8” center-to-center. (Not shown)

CK-511 6” Round foot cabinet pull. 4 7/8” center-to-center.

Page 23: Spec 24G Cabinet Hardware

Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m

PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.

24-23

Revised 06/20/16

Illustrations are for demonstration purposes only.

1 3/4” Break off screws included.

Round foot cabinet pulls.

CK-512, CK-570 – CK-578 ROUND FOOT CABINET PULLS

1 3/4"

7 1/

8"

CK-573 – Round foot cabinet pull. – 8 5/8" center-to-center. – 1/2" round.

CK-570 – Round foot cabinet pull. – 6 1/8" center-to-center. – 1/2" round.

CK-578 – Round foot cabinet pull. – 12 1/8" center-to-center. – 1/2" round.

1 3/4"

9 5/

8"

1 3/4"

13 3

/8"

1"

1"

1 1/4"

CK-512 – Round foot cabinet pull. – 6 7/8" center-to-center. – 1/2" face width.

1 3/8"

7 7/

8"

15/16"

5/16"

CK-512 7 7/8” Round foot cabinet pull. 6 7/8” center-to-center.

CK-570 7 1/8” Round foot cabinet pull. 6 1/8” center-to-center.

CK-573 9 5/8” Round foot cabinet pull. 8 5/8” center-to-center.

CK-578 13 3/8” Round foot cabinet pull. 12 1/8” center-to-center.

Page 24: Spec 24G Cabinet Hardware

Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m

PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.

24-24

Revised 06/20/16

Illustrations are for demonstration purposes only.

1 3/4” Break off screws included.

Square foot cabinet pulls.

CK-514 – CK-516 SQUARE FOOT CABINET PULLS

4 1/

2"

1 5/16"

CK-514 – Square foot cabinet pull. – 3 3/4" center-to-center. – 1/2" face width.

CK-515 – Square foot cabinet pull. – 4 7/8" center-to-center. – 1/2" face width.

CK-516 – Square foot cabinet pull. – 6 15/16" center-to-center. – 1/2" face width.

1 5/16"

7 5/

8"

5 1/

2"

1 5/16"5/8"

5/8"

5/8"

1/4"1/4" 1/4"

CK-514.15 – Square foot cabinet pull. – 15" center-to-center. – 1/2" face width.

1 5/16"

15 5

/8"

5/8"

1/4"

CK-514.20 – Square foot cabinet pull. – 20" center-to-center. – 1/2" face width.

1 5/16"

20 5

/8"

5/8"

1/4"

CK-514 4 1/2” Square foot cabinet pull. 3 3/4” center-to-center.

CK-514.15 15 5/8” Square foot cabinet pull. 15” center-to-center.

CK-514.20 20 5/8” Square foot cabinet pull. 20” center-to-center.

CK-515 5 1/2” Square foot cabinet pull. 4 7/8” center-to-center.

CK-516 7 5/8” Square foot cabinet pull. 6 15/16” center-to-center.

Page 25: Spec 24G Cabinet Hardware

Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m

PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.

24-25

Revised 06/20/16

Illustrations are for demonstration purposes only.

1 3/4” Break off screws included.

Square foot cabinet pulls.

CK-580 – CK-585 SQUARE FOOT CABINET PULLS

7"

1 3/4"

CK-580 – Square foot cabinet pull. – 6 1/8" center-to-center. – 1/2" round.

CK-583 – Square foot cabinet pull. – 8 5/8" center-to-center. – 1/2" round.

9 1/

2"

1 3/4"

1"

1"

CK-584 – Square foot cabinet pull. – 23 3/4" center-to-center. – 1/2" round.

24 7

/8"

1 3/4" 7/8"

CK-585 – Square foot cabinet pull. – 12 1/8" center-to-center. – 1/2" round.

13"

1 3/4" 7/8"

CK-580 7” Square foot cabinet pull. 6 1/8” center-to-center.

CK-583 9 1/2” Square foot cabinet pull. 8 5/8” center-to-center.

CK-584 24 7/8” Square foot cabinet pull. 23 3/4” center-to-center.

CK-585 13” Square foot cabinet pull. 12 1/8” center-to-center.

Page 26: Spec 24G Cabinet Hardware

Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m

PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.

24-26

Revised 06/20/16

Illustrations are for demonstration purposes only.

CK-586 – CK-588 SQUARE FOOT CABINET PULLS

1 3/4” Break off screws included.

Square foot cabinet pulls.

CK-586 – Square foot cabinet pull. – 4 5/8" center-to-center. – 5/8" round.

1 3/4"

5 7/

8"

1 1/8"

CK-588 – Square foot cabinet pull. – 12" center-to-center. – 1/2" round.

13 1

/8"

1 3/4" 1 1/8"

CK-587 – Square foot cabinet pull. – 18 1/8" center-to-center. – 1/2" round.

19 1

/8"

2" 15/16"

CK-586 5 7/8” Square foot cabinet pull. 4 5/8” center-to-center.

CK-587 19 1/8” Square foot cabinet pull. 18 1/8” center-to-center.

CK-588 13 1/8” Square foot cabinet pull. 12” center-to-center.

Page 27: Spec 24G Cabinet Hardware

Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m

PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.

24-27

Revised 06/20/16

Illustrations are for demonstration purposes only.

1 3/4” Break off screws included.

Square handle cabinet pulls.

CK-532 – CK-535.9 SQUARE HANDLE CABINET PULLS

1 3/8"

3 1/

4"

CK-532 – Square handle cabinet pull. – 2 1/2" center-to-center. – 3/8" face width.

CK-533 – Square handle cabinet pull. – 3" center-to-center. – 3/8" face width.

CK-534 – Square handle cabinet pull. – 3 3/4" center-to-center. – 3/8" face width.

CK-535 – Square handle cabinet pull. – 5" center-to-center. – 3/8" face width.

1 3/8"

3 3/

4"

1 3/8"

4 5/

8"

1 3/8"

5 7/

8"

3/4" 3/4"3/4"

3/4"

1/4" 1/4" 1/4" 1/4"

CK-535.9 – Square handle cabinet pull. – 9" center-to-center. – 3/8" face width.

1 3/8"

9 3/

4"

3/4"

1/4"

CK-532 3 1/4” Square handle cabinet pull. 2 1/2” center-to-center.

CK-533 3 3/4” Square handle cabinet pull. 3” center-to-center.

CK-534 4 5/8” Square handle cabinet pull. 3 3/4” center-to-center.

CK-535 5 7/8” Square handle cabinet pull. 5” center-to-center.

CK-535.9 9 3/4” Square handle cabinet pull. 9” center-to-center.

Page 28: Spec 24G Cabinet Hardware

Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m

PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.

24-28

Revised 06/20/16

Illustrations are for demonstration purposes only.

1 3/4” Break off screws included.

Square handle cabinet pulls.

CK-535.12 – CK-548 SQUARE HANDLE CABINET PULLS

CK-544 – Square handle cabinet pull. – 3 3/4" center-to-center. – 7/16" face width.

CK-545 – Square handle cabinet pull. – 5" center-to-center. – 7/16" face width.

4 5/

8"1 3/8"

1 3/8"

5 3/

4"

7/8"7/8"

5/16" 5/16"

CK-548 – Square handle cabinet pull. – 8 1/2" center-to-center. – 7/16" face width.

1 3/8"

9 3/

8"

7/8"

5/16"

CK-546 – Square handle cabinet pull. – 5 3/4" center-to-center. – 7/16" face width.

1 3/8"

6 3/

4"

7/8"

3/8"

CK-535.12 – Square handle cabinet pull. – 11 3/4" center-to-center. – 3/8" face width.

1 3/4"

12 1

1/16

"

3/4"

1/4"

CK-535.12 12 11/16” Square handle cabinet pull. 11 3/4” center-to-center.

CK-544 4 5/8” Square handle cabinet pull. 3 3/4” center-to-center.

CK-545 5 3/4” Square handle cabinet pull. 5” center-to-center.

CK-546 6 3/4” Square handle cabinet pull. 5 3/4” center-to-center.

CK-548 9 3/8” Square handle cabinet pull. 8 1/2” center-to-center.

Page 29: Spec 24G Cabinet Hardware

Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m

PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.

24-29

Revised 06/20/16

Illustrations are for demonstration purposes only.

CK-549 – CK-560 SQUARE HANDLE CABINET PULLS

1 3/4” Break off screws included.

Square handle cabinet pulls.

CK-551 – Square handle cabinet pull. – 12" center-to-center. – 5/8" face width.

CK-559 – Square handle cabinet pull. – 14 7/8" center-to-center. – 5/8" face width.

13"

1 3/8"

16"

1 3/4"

7/8"

1 1/4"

7/16"7/16"

CK-549 – Square handle cabinet pull. – 10" center-to-center. – 5/8" face width.

1 3/8"

11"

7/8"

7/16"

CK-560 – Square handle cabinet pull. – 16" center-to-center. – 5/8" face width.

17 1

/4"

1 3/4" 1 1/4"

7/16"

CK-549 11” Square handle cabinet pull. 10” center-to-center.

CK-551 13” Square handle cabinet pull. 12” center-to-center.

CK-559 16” Square handle cabinet pull. 14 7/8” center-to-center.

CK-560 17 1/4” Square handle cabinet pull. 16” center-to-center.

Page 30: Spec 24G Cabinet Hardware

Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m

PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.

24-30

Revised 06/20/16

Illustrations are for demonstration purposes only.

1 3/4” Break off screws included.

Contemporary cabinet pulls.

CK-909 – CK-918 CONTEMPORARY CABINET PULLS

CK-911 – Contemporary

cabinet pull. – 4 7/8" center-

to-center.

CK-910 – Contemporary

cabinet pull. – 3 7/8" center-

to-center.

CK-909 – Contemporary

cabinet pull. – 3" center-to-center.

5 1/

2

1 1/8"

4 1/

2

1 1/8"

3 5/

8"

1 1/8" 9/16"9/16"

9/16"

3/16" 3/16" 3/16"

7 5/

8"

1 1/8"

CK-912 – Contemporary

cabinet pull. – 6 15/16" center- to-center.

9/16"

3/16"

18 3

/4"

1 1/8"

CK-912.18 – Contemporary

cabinet pull. – 18 3/16" center-

to-center.

9/16"

3/16"

12 5

/8"

1 1/8"

CK-913 – Contemporary

cabinet pull. – 12" center-

to-center.

9/16"

3/16"

9 5/

8"

1 1/8"

CK-918 – Contemporary

cabinet pull. – 8 7/8" center-

to-center.

9/16"

3/16"

CK-909 3 5/8” Contemporary cabinet pull. 3” center-to-center.

CK-910 4 1/2” Contemporary cabinet pull. 3 7/8” center-to-center.

CK-911 5 1/2” Contemporary cabinet pull. 4 7/8” center-to-center.

CK-912 7 5/8” Contemporary cabinet pull. 6 15/16” center-to-center.

CK-912.18 18 3/4” Contemporary cabinet pull. 18 3/16” center-to-center.

CK-913 12 5/8” Contemporary cabinet pull. 12” center-to-center.

CK-918 9 5/8” Contemporary cabinet pull. 8 7/8” center-to-center.

Page 31: Spec 24G Cabinet Hardware

Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m

PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.

24-31

Revised 06/20/16

Illustrations are for demonstration purposes only.

CK-950 – CK-955 CONTEMPORARY CABINET PULLS

1 3/4” Break off screws included.

Contemporary cabinet pulls.

CK-951 – Contemporary cabinet pull. – 5 11/16" center-to-center.

CK-954 – Contemporary cabinet pull. – 11 3/4" center-to-center.

CK-955 – Contemporary cabinet pull. – 17 13/16" center-to-center.

6"

1 1/8" 3/4"1/

4"

1/4"

12"

1 1/8" 3/4"

1/4"

1/4"

18"

1 1/8" 3/4"

1/4"

1/4"

CK-950 – Contemporary cabinet pull. – 3 11/16" center-to-center.

4"

1 1/8" 3/4"

1/4"

1/4"

CK-950 4” Contemporary cabinet pull. 3 11/16” center-to-center.

CK-951 6” Contemporary cabinet pull. 5 11/16” center-to-center.

CK-954 12” Contemporary cabinet pull. 11 3/4” center-to-center.

CK-955 18” Contemporary cabinet pull. 17 13/16” center-to-center.

Page 32: Spec 24G Cabinet Hardware

Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m

PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.

24-32

Revised 06/20/16

Illustrations are for demonstration purposes only.

CK-956 – CK-959 CONTEMPORARY CABINET PULLS

1 3/4” Break off screws included.

Contemporary cabinet pulls.

CK-956 – Contemporary cabinet pull. – 23 7/8" center-to-center.

24 3

/16"

1 1/8" 3/4"

1/4"

1/4"

CK-958 – Contemporary cabinetpull. – 10 1/4" center-to-center.

10 1

/2"

1 1/4" 1"

3/16"

CK-957 – Contemporary cabinet pull. – 4 5/16" center-to-center.

4 9/

16"

1 3/16" 1"

1/4"

3/16"

CK-959 – Contemporary cabinet pull. – 4 5/16" center-to-center.

4 9/

16"

1 1/2" 1"

1/4"

3/16"

1/4"

CK-956 24” Contemporary cabinet pull. 23 7/8” center-to-center.

CK-957 4 9/16” Contemporary cabinet pull. 4 5/16” center-to-center.

CK-958 10 1/2” Contemporary cabinet pull. 10 1/4” center-to-center.

CK-959 4 9/16” Contemporary cabinet pull. 4 5/16” center-to-center.

Page 33: Spec 24G Cabinet Hardware

Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m

PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.

24-33

Revised 06/20/16

Illustrations are for demonstration purposes only.

Contemporary ergonomic cabinet pulls.

1 3/4” Break off screws included.

CK-969 CONTEMPORARY ERGONOMIC CABINET PULLS

CK-969 – Ergonomic cabinet pull. – 12" center-to-center. – 7/8" face width. – Underside 1/2 round.

1 9/16"

12 3

/8"

7/8"

7/16"

CK-969 12 3/8” Contemporary ergonomic cabinet pull. 12” center-to-center.

Page 34: Spec 24G Cabinet Hardware

Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m

PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.

24-34

Revised 06/20/16

Illustrations are for demonstration purposes only.

Square cabinet pulls. *AVAILABLE BACK-TO-BACK.

1 3/4” Break off screws included.

CK-1003 – CK-1012 SQUARE CABINET PULLS

CK-1003 3 5/8” Square cabinet pull. 3” center-to-center.*

CK-1004 4 5/8” Square cabinet pull. 4” center-to-center.*

CK-1006 6 5/8” Square cabinet pull. 6” center-to-center.*

CK-1008 8 5/8” Square cabinet pull. 8” center-to-center.*

CK-1010 10 5/8” Square cabinet pull. 10” center-to-center.*

CK-1012 12 5/8” Square cabinet pull. 12” center-to-center.*

CK-1003* – Square cabinet pull. – 3" center-to-center. – 1/2" face width. – *AVAILABLE BACK-TO-BACK.

3 5/

8"

1 1/2" 1/2"

5/8"

5/8"

4 5/

8"

1 1/2" 1/2"

5/8"

5/8"

CK-1004* – Square cabinet pull. – 4" center-to-center. – 1/2" face width. – *AVAILABLE BACK-TO-BACK.

6 5/

8"

1 1/2" 1/2"

5/8"

5/8"

CK-1006* – Square cabinet pull. – 6" center-to-center. – 1/2" face width. – *AVAILABLE BACK-TO-BACK.

8 5/

8"

1 1/2" 1/2"

5/8"

5/8"

CK-1008* – Square cabinet pull. – 8" center-to-center. – 1/2" face width. – *AVAILABLE BACK-TO-BACK.

10 5

/8"

1 1/2" 1/2"

5/8"

5/8"

CK-1010* – Square cabinet pull. – 10" center-to-center. – 1/2" face width. – *AVAILABLE BACK-TO-BACK.

12 5

/8"

1 1/2" 1/2"

5/8"

5/8"

CK-1012* – Square cabinet pull. – 12" center-to-center. – 1/2" face width. – *AVAILABLE BACK-TO-BACK.

Page 35: Spec 24G Cabinet Hardware

Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m

PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.

24-35

Revised 06/20/16

Illustrations are for demonstration purposes only.

CK-2000-1.75 – CK-2000.18 CONTEMPORARY CABINET PULLS

Contemporary cabinet pulls. *AVAILABLE BACK-TO-BACK.

1 3/4” Break off screws included.

CK-2000-1.75* – Cabinet pull. – *AVAILABLE BACK-TO-BACK.

CK-2000.5* – Cabinet pull. – *AVAILABLE BACK-TO-BACK.

CK-2000.8* – Cabinet pull. – *AVAILABLE BACK-TO-BACK.

5"

1 1/

4"

CK-2000.10* – Cabinet pull. – *AVAILABLE BACK-TO-BACK.

1 1/

4"

8"

1 1/

4"

1 3/4"

1 1/

4"

10"

1/2" 5/8"

5/8" 5/8"

5/8"

1/2"

5/8"

5/8"

5/8"

1/2" 5/8"

1/2"

CK-2000.12* – Cabinet pull. – *AVAILABLE BACK-TO-BACK.

CK-2000.18* – Cabinet pull. – *AVAILABLE BACK-TO-BACK.

1 1/

4"

12"

5/8"

5/8"

1/2"

1 1/

4"

18 5/8"

5/8"

5/8"

1/2"

CK-2000-1.75 1 3/4” Contemporary cabinet pull. 1 1/4” Center-to-center.*

CK-2000.5 5” Contemporary cabinet pull. 4 1/2” Center-to-center.*

CK-2000.8 8” Contemporary cabinet pull. 7 1/2” Center-to-center.*

CK-2000.10 10” Contemporary cabinet pull. 9 1/2” Center-to-center.*

CK-2000.12 12” Contemporary cabinet pull. 11 1/2” Center-to-center.*

CK-2000.18 18 5/8” Contemporary cabinet pull. 18” Center-to-center.*

Page 36: Spec 24G Cabinet Hardware

Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m

PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.

24-36

Revised 06/20/16

Illustrations are for demonstration purposes only.

1 3/4” Break off screws included.

Contemporary cabinet pulls.

CK-9103 – CK-9108 CONTEMPORARY CABINET PULLS

CK-9106 – Contemporary cabinet

pull w/round feet. – 5" center-to-center. – 1/4" face width.

6"

1 3/8" 1/2"

1/2"

1/2"

CK-9103 – Contemporary cabinet

pull w/round feet. – 3" center-to-center. – 1/4" face width.

4"

1 3/8" 1/2"

1/2"

1/2"

CK-9104 – Contemporary cabinet

pull w/round feet. – 3 3/4" center-to-center. – 1/4" face width.

4 3/

4"

1 3/8" 1/2"1/

2"

1/2"

CK-9107 – Contemporary cabinet

pull w/round feet. – 5 1/2" center-to-center. – 1/4" face width.

6 1/

2"

1 3/8" 1/2"

1/2"

1/2"

CK-9108 – Contemporary cabinet

pull w/round feet. – 7" center-to-center. – 1/4" face width.

8"

1 3/8" 1/2"

1/2"

1/2"

CK-9103 4” Contemporary cabinet pull. 3” center-to-center.

CK-9104 4 3/4” Contemporary cabinet pull. 3 3/4” center-to-center.

CK-9106 6” Contemporary cabinet pull. 5” center-to-center.

CK-9107 6 1/2” Contemporary cabinet pull. 5 1/2” center-to-center.

CK-9108 8” Contemporary cabinet pull. 7” center-to-center.

Page 37: Spec 24G Cabinet Hardware

Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m

PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.

24-37

Revised 06/20/16

Illustrations are for demonstration purposes only.

CK-9110 – CK-9124 CONTEMPORARY CABINET PULLS

1 3/4” Break off screws included.

Contemporary cabinet pulls.

CK-9118 – Contemporary cabinet pull w/

round feet. – 17 1/8" center-to-center. – 1/4" face width.

CK-9124 – Contemporary cabinet pull w/

round feet. – 23" center-to-center. – 5/16" face width.

18 1

/8"

1 3/8"

24 1

/8"

1 3/8"

1/2"

1/2"

9/16"

9/16

"

9/16" 9/16"

CK-9112 – Contemporary cabinet pull

w/round feet. – 11 1/16" center-to-center. – 1/4" face width.

12"

1 3/8" 1/2"1/

2"

1/2"

CK-9110 – Contemporary cabinet pull

w/round feet. – 9 1/2" center-to-center. – 1/4" face width.

10 1

/2"

1 3/8" 1/2"

1/2"

1/2"

CK-9110 10 1/2” Contemporary cabinet pull. 9 1/2” center-to-center.

CK-9112 12” Contemporary cabinet pull. 11 1/16” center-to-center.

CK-9118 18 1/8” Contemporary cabinet pull. 17 1/8” center-to-center.

CK-9124 24 1/8” Contemporary cabinet pull. 23” center-to-center.

Page 38: Spec 24G Cabinet Hardware

Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m

PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.

24-38

Revised 06/20/16

Illustrations are for demonstration purposes only.

Contemporary cabinet pulls.

1 3/4” Break off screws included.

CK-9305 – CK-9313 CONTEMPORARY CABINET PULLS

CK-9305 – Contemporary

cabinet pull. – 4" center-to-center. – Underside of handle

is v-shaped.

1 1/32" 3/4"

3/8"

4 3/

8"

4"

3/8"

1 1/32" 3/4"

3/8"

6 3/

8"

6"

3/8"

1 1/32" 3/4"

3/8"

8 3/

8"

8"

3/8"

1 1/32" 3/4"

3/8"

12 3

/8"

12"

3/8"

CK-9307 – Contemporary

cabinet pull. – 6" center-to-center. – Underside of handle

is v-shaped.

CK-9309 – Contemporary

cabinet pull. – 8" center-to-center. – Underside of handle

is v-shaped.

CK-9313 – Contemporary

cabinet pull. – 12" center-to-center. – Underside of handle

is v-shaped.

CK-9305 4 3/8” Contemporary cabinet pull. 4” center-to-center.

CK-9307 6 3/8” Contemporary cabinet pull. 6” center-to-center.

CK-9309 8 3/8” Contemporary cabinet pull. 8” center-to-center.

CK-9313 12 3/8” Contemporary cabinet pull. 12” center-to-center.

Page 39: Spec 24G Cabinet Hardware

Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m

PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.

24-39

Revised 06/20/16

Illustrations are for demonstration purposes only.

Contemporary cabinet pulls.

1 3/4” Break off screws included.

CK-9405 – CK-9413 CONTEMPORARY CABINET PULLS

CK-9405 – Contemporary

cabinet pull. – 4" center-to-center.

1 1/32" 3/4"

3/8"

4 3/

8"

4"

3/8"

CK-9407 – Contemporary

cabinet pull. – 6" center-to-center.

CK-9409 – Contemporary

cabinet pull. – 8" center-to-center.

CK-9413 – Contemporary

cabinet pull. – 12" center-to-center.

1 1/32" 3/4"

3/8"

8 3/

8"

8"

3/8"

1 1/32" 3/4"

3/8"

12 3

/8"

12"

3/8"

1 1/32" 3/4"

3/8"

6 3/

8"

6"

3/8"

CK-9405 4 3/8” Contemporary cabinet pull. 4” center-to-center.

CK-9407 6 3/8” Contemporary cabinet pull. 6” center-to-center.

CK-9409 8 3/8” Contemporary cabinet pull. 8” center-to-center.

CK-9413 12 3/8” Contemporary cabinet pull. 12” center-to-center.

Page 40: Spec 24G Cabinet Hardware

Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m

PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.

24-40

Revised 06/20/16

Illustrations are for demonstration purposes only.

CK-9504 – CK-9512 CONTEMPORARY CABINET PULLS

Contemporary cabinet pulls.

1 3/4” Break off screws included.

CK-9504 4” Contemporary cabinet pull. 3 3/4” center-to-center.

CK-9506 6” Contemporary cabinet pull. 5 3/4” center-to-center.

CK-9508 8” Contemporary cabinet pull. 7 3/4” center-to-center.

CK-9512 12” Contemporary cabinet pull. 11 3/4” center-to-center.

CK-9504 – Contemporary

cabinet pull. – 3 3/4" center-to-center. – Underside of pull is V-shaped.

7/8" 3/4"

4"

1/4"

CK-9506 – Contemporary

cabinet pull. – 5 3/4" center-to-center. – Underside of pull is V-shaped.

CK-9508 – Contemporary

cabinet pull. – 7 3/4" center-to-center. – Underside of pull is V-shaped.

CK-9512 – Contemporary

cabinet pull. – 11 3/4" center-to-center. – Underside of pull is V-shaped.

7/8" 3/4"

1/4" 8"

1/4"

7/8" 3/4"

1/4"

12"

1/4"

7/8" 3/4"

1/4" 6"

1/4"

1/4"

Page 41: Spec 24G Cabinet Hardware

Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m

PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.

24-41

Revised 06/20/16

Illustrations are for demonstration purposes only.

CK-9604 – CK-9612 CONTEMPORARY CABINET PULLS

Contemporary cabinet pulls.

1 3/4” Break off screws included.

CK-9604 4” Contemporary cabinet pull. 3 3/4” center-to-center.

CK-9606 6” Contemporary cabinet pull. 5 3/4” center-to-center.

CK-9608 8” Contemporary cabinet pull. 7 3/4” center-to-center.

CK-9612 12” Contemporary cabinet pull. 11 3/4” center-to-center.

CK-9604 – Contemporary

cabinet pull. – 3 3/4" center-to-center.

1 1/16" 3/4"

4"

1/4"

CK-9606 – Contemporary

cabinet pull. – 5 3/4" center-to-center.

CK-9608 – Contemporary

cabinet pull. – 7 3/4" center-to-center.

CK-9612 – Contemporary

cabinet pull. – 11 3/4" center-to-center.

1 1/16" 3/4"

7/16" 8"

1/4"

1 1/16" 3/4"

7/16"

12"

1/4"

1 1/16" 3/4"

7/16" 6"

1/4"

7/16"

Page 42: Spec 24G Cabinet Hardware

Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m

PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.

24-42

Revised 06/20/16

Illustrations are for demonstration purposes only.

1 3/4” Break off screws included.

Contemporary cabinet pulls.

CK-9204 – CK-9210 CONTEMPORARY CABINET PULLS

CK-9204 – Contemporary cabinet pull. – 3 11/16" center-to-center.

CK-9206 – Contemporary cabinet pull. – 5 11/16" center-to-center.

CK-9208 – Contemporary cabinet pull. – 7 11/16" center-to-center.

4"

2"7/8"

6"

2"7/8"

8"

2"7/8"

1/4"

1/4"1/4"

1/4"

CK-9210 – Contemporary cabinet pull. – 9 11/16" center-to-center.

10"

2"7/8"

1/4"

CK-9204 4” Contemporary cabinet pull. 3 11/16” center-to-center.

CK-9206 6” Contemporary cabinet pull. 5 11/16” center-to-center.

CK-9208 8” Contemporary cabinet pull. 7 11/16” center-to-center.

CK-9210 10” Contemporary cabinet pull. 9 11/16” center-to-center.

Page 43: Spec 24G Cabinet Hardware

Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m

PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.

24-43

Revised 06/20/16

Illustrations are for demonstration purposes only.

CK-1904 – CK-1910 CONTEMPORARY CABINET PULLS

Contemporary cabinet pulls.

1 3/4” Break off screws included.

CK-1904 – Cabinet pull. – 1 1/2" center-to-center.

1/4"

4"

2 3/

4" 3/4"

3/4"

3"

3/4"

CK-1906 – Cabinet pull. – 1 1/4" center-to-center.

2 3/4

CK-1910 – Cabinet pull. – 8" center-to-center.

11/1

6"

10"

8 7/8"

11/1

6"3/

16"

1/2"

3/16

"

1 5/8"

1/2"

SIDE VIEW

5/16

"

1/8"

SIDE VIEW

3/16"

5/16

"

1/8"

SIDE VIEW

3/16"

CK-1904 4” x 2 3/4” x 1/4” Contemporary cabinet pull. 1 1/2” center-to-center.

CK-1906 2 3/4” x 11/16” x 3/16” Contemporary cabinet pull. 1 1/4” center-to-center.

CK-1910 10” x 11/16” x 3/16” Contemporary cabinet pull. 8” center-to-center.

Page 44: Spec 24G Cabinet Hardware

Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m

PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.

24-44

Revised 06/20/16

Illustrations are for demonstration purposes only.

Edge mount cabinet pulls.

#6 x 3/4” wood screws included.

CK-497 – CK-500 EDGE MOUNT CABINET PULLS

Side View

5/8"

2 1/2"

5/8"

1 3/8"

CK-500 – Edge mount cabinet pull.

Front View

1 3/

8"

5/16

"7/16"

Top View

.125

0"

CK-498 – Edge mount cabinet pull.

5"

Side View

Front View

3/8

3/4"Top View

5/8"

2"

5/8"

2".1

250"

CK-497 – Edge mount cabinet pull.

5"

Side View

Front View

3/8"

3/4"Top View

5/8"

1 3/4"

5/8"

1 3/

4".1

310"

CK-497 5” x 1 3/4” Edge mount cabinet pull.

CK-498 5” x 2” Edge mount cabinet pull.

CK-500 2 1/2” x 1 3/8” Edge mount cabinet pull.

Page 45: Spec 24G Cabinet Hardware

Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m

PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.

24-45

Revised 06/20/16

Illustrations are for demonstration purposes only.

CK-501 – CK-501.6 EDGE MOUNT CABINET PULLS

Edge mount cabinet pulls.

#6 x 3/4” wood screws included.

CK-501 – Edge mount cabinet pull.

4"

Side View

Front View

1/4"

3/4"Top View

5/8"

1 3/8"

5/8"

1 3/

8".1

310"

CK-501.6 – Edge mount cabinet pull.

6"

Side View

Front View

1/4"

3/4"Top View

5/8"

1 3/8"

5/8"

1 3/

8".1

310"

CK-501 4” x 1 3/8” Edge mount cabinet pull.

CK-501.6 6” x 1 3/8” Edge mount cabinet pull.

Page 46: Spec 24G Cabinet Hardware

Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m

PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.

24-46

Revised 06/20/16

Illustrations are for demonstration purposes only.

CK-501.10 – CK-501.15 EDGE MOUNT CABINET PULLS

Edge mount cabinet pulls.

#6 x 3/4” wood screws included.

CK-501.10 – Edge mount cabinet pull.

10"

5/8"

1 3/8"

Side View

Front View

1/4"

3/4"Top View

5/8"

1 3/

8".1

380"

CK-501.15 – Edge mount cabinet pull.

15"

5/8"

1 3/8"

Side View

Front View

1/4"

3/4"Top View

5/8"

1 3/

8".1

380"

CK-501.10 10” x 1 3/8” Edge mount cabinet pull.

CK-501.15 15” x 1 3/8” Edge mount cabinet pull.

Page 47: Spec 24G Cabinet Hardware

Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m

PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.

24-47

Revised 06/20/16

Illustrations are for demonstration purposes only.

Rolled edge mount cabinet pulls.

#6 x 5/8 wood screws included.

CK-499R – CK-501R ROLLED EDGE MOUNT CABINET PULLS

CK-499R – Rolled edge mount cabinet pull.

CK-500R – Rolled edge mount cabinet pull.

CK-501R – Rolled edge mount cabinet pull.

1 1/

2"

1 1/2"

1 3/8" 1 3/8"

2 1/2" 4"

3/16

"

3/16

"1

3/8"

1 3/

8"

3/8"

3/8"

5/16

"

7/16"

1/4"

3/4"

1 1/2"

5/16

".1

250"

Side View

Front View

Top View

Side View

Front View

Top View

Side View

Front View

Top View

.115

0"

.115

0"

CK-499R 1 1/2” x 5/16” Rolled edge mount cabinet pull.

CK-500R 2 1/2” x 3/16” Rolled edge mount cabinet pull.

CK-501R 4” x 3/16” Rolled edge mount cabinet pull.

Page 48: Spec 24G Cabinet Hardware

Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m

PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.

24-48

Revised 06/20/16

Illustrations are for demonstration purposes only.

#6 x 5/8 wood screws included.

Edge mount cabinet pulls.

CK-503 – CK-505 EDGE MOUNT CABINET PULLS

CK-503 – Edge mount cabinet pull.

3/4"

1 3/4"

5/8"

CK-504 – Edge mount cabinet pull.

CK-505 – Edge mount cabinet pull.

1 3/16"

1 3/4"

5/8"

3/4"

5/8"

2 3/8"

1 3/4"

5/8"

3/4"

5/8"

Side View

Front View

Back View

Side View

Front View

Back View

Side View

Front View

Back View5/

8"

2 1/4"

5/16

"

3/8" 5/16

"

1/4" 5/16

"

3/8"

CK-503 2 1/4” x 1 3/4” x 5/8” Edge mount cabinet pull.

CK-504 1 3/16” x 1 3/4” x 5/8” Edge mount cabinet pull.

CK-505 2 3/8” x 1 3/4” x 5/8” Edge mount cabinet pull.

Page 49: Spec 24G Cabinet Hardware

Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m

PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.

24-49

Revised 06/20/16

Illustrations are for demonstration purposes only.

#8 x 1/2 wood screws included.

Flush cabinet pulls.

FEP-210 – FEP-312 FLUSH CABINET PULLS

PROFILE VIEW

10"

2"

FEP-210 – Flush cabinet pull.

9 3/4"

3/4"

PROFILE VIEW

12"

2 3/

4"

FEP-312 – Flush cabinet pull.

11 3/4"

3/4"

FEP-210 10” x 2” x 3/4” Flush cabinet pull.

FEP-312 12” x 2 3/4” x 3/4” Flush cabinet pull.

Page 50: Spec 24G Cabinet Hardware

Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m

PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.

24-50

Revised 06/20/16

Illustrations are for demonstration purposes only.

1 3/4” Break off screws included.

L-shaped cabinet pulls.

CK-998RH – CK-998LH L-SHAPED CABINET PULLS

CK-998LH – L-shaped cabinet pull.

1 1/4" 2 3/4"

4 1/

2"

2 3/4" 1 1/4"

4 1/

2"

CK-998RH – L-shaped cabinet pull.

9/16"

1/2"

1/2"

9/16"

1/4" 1/4"

CK-998RH 2 3/4” x 4 1/2” L-shaped cabinet pull. Right hand.

CK-998LH 2 3/4” x 4 1/2” L-shaped cabinet pull. Left hand.

Page 51: Spec 24G Cabinet Hardware

Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m

PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.

24-51

Revised 06/20/16

Illustrations are for demonstration purposes only.

1 3/4” Break off screws included.

Swedge cabinet pulls.

CK-803 – CK-805.18 SWEDGE CABINET PULLS

1 1/2"

8"

CK-805 – Swedge cabinet pull. – 6 7/8" center-to-center. – 1/4" face width.

7/16"

1 1/

8"

9/16" 1/4"

CK-805.18 – Swedge cabinet pull. – 16 7/8" center-to-center. – 5/16" face width.

1 1/2"

18"

7/16"

1 1/

8"

9/16"1 1/2"

6"

CK-804 – Swedge cabinet pull. – 4 7/8" center-to-center. – 3/16" face width.

7/16"

1 1/

8"

9/16"

1 1/2"

5"

CK-803 – Swedge cabinet pull. – 3 7/8" center-to-center. – 3/16" face width.

7/16"

1 1/

8"

9/16"

5/16"

3/16"3/16"

CK-803 5” Swedge cabinet pull. 3 7/8” center-to-center.

CK-804 6” Swedge cabinet pull. 4 7/8” center-to-center.

CK-805 8” Swedge cabinet pull. 6 7/8” center-to-center.

CK-805.18 18” Swedge cabinet pull. 16 7/8” center-to-center.

Page 52: Spec 24G Cabinet Hardware

Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m

PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.

24-52

Revised 06/20/16

Illustrations are for demonstration purposes only.

CK-805.24 – CK-807 SWEDGE CABINET PULLS

1 3/4” Break off screws included.

Swedge cabinet pulls.

CK-807 – Swedge cabinet pull. – 10 7/8" center-to-center. – 1/4" face width.

1 1/2"

12"

7/16"

1 1/

8"

9/16" 1/4"

CK-805.24 – Swedge cabinet pull. – 23" center-to-center. – 1/2" face width.

1 3/8"

24 1

/8"

3/4"

1 1/

8"

9/16" 1/2"

CK-805-24.175 – Swedge cabinet pull. – 23" center-to-center. – 1/2" face width.

1 3/4"

24 1

/8"

3/4"

1 1/

8"

9/16" 1/2"

CK-805.24 24 1/8” Swedge cabinet pull. 1 3/8” Projection. 23” center-to-center.

CK-805-24.175 24 1/8” Swedge cabinet pull. 1 3/4” Projection. 23” center-to-center.

CK-807 12” Swedge cabinet pull. 10 7/8” center-to-center.

Page 53: Spec 24G Cabinet Hardware

Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m

PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.

24-53

Revised 06/20/16

Illustrations are for demonstration purposes only.

CK-850 – CK860 SWEPT CABINET PULLS

Swept cabinet pulls.

1 3/4” Break off screws included.

CK-850 – Swept cabinet pull. – 8 1/16" center-to-center.

5/8"

10"

CK-860 – Swept cabinet pull. – 8 1/16" center-to-center.

10"

5/8"

1/2"

7/16

"

3/4"

9/16

"

1/2"

CK-850 10” Swept cabinet pull. 8 1/16” center-to-center.

CK-860 10” Swept cabinet pull. 8 1/16” center-to-center.

Page 54: Spec 24G Cabinet Hardware

Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m

PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.

24-54

Revised 06/20/16

Illustrations are for demonstration purposes only.

Ridge cabinet pulls.

1 3/4” Break off screws included.

CK-142 – CK-145 RIDGE CABINET PULLS

CK-142 – Ridge cabinet pull. – 3" center-to-center. – 1/2" round.

1 5/8"

3 3/

4"

CK-143 – Ridge cabinet pull. – 3 3/4" center-to-center. – 1/2" round.

CK-144 – Ridge cabinet pull. – 4 7/8" center-to-center. – 9/16" round.

CK-145 – Ridge cabinet pull. – 6 7/8" center-to-center. – 5/8" round.

1 3/8"

4 1/

2"

1 5/8"

5 5/

8"

1 3/4"

7 5/

8"

5/8" 5/8"5/8"

5/8"

1 5/

8"

2 1/

4"

5 1/

2"

3 1/

2"CK-142 3 3/4” Ridge cabinet pull. 3” center-to-center.

CK-143 4 1/2” Ridge cabinet pull. 3 3/4” center-to-center.

CK-144 5 5/8” Ridge cabinet pull. 4 7/8” center-to-center.

CK-145 7 5/8” Ridge cabinet pull. 6 7/8” center-to-center.

Page 55: Spec 24G Cabinet Hardware

Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m

PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.

24-55

Revised 06/20/16

Illustrations are for demonstration purposes only.

1 3/4” Break off screws included.

Surface mount cabinet pulls.

CK-390 – CK-916 SURFACE MOUNT CABINET PULLS

CK-390 – Surface mount cabinet pull. – 1 1/16" center-to-center. – 3/4" face width.

1"

5 3/

4"

CK-915 – Surface mount cabinet pull. – 4 5/8" center-to-center. – 3/4" face width.

CK-916 – Surface mount cabinet pull. – 5 5/8" center-to-center. – 7/8" face width.

1"

6"

1"

7"

3/4"

1/2"

1/2"1/2"

5/16"

3 3/

4"

3/8" 3/8"4"

3 5/

16"

CK-390 5 3/4” Surface mount cabinet pull. 1 1/16” center-to-center.

CK-915 6” Surface mount cabinet pull. 4 5/8” center-to-center.

CK-916 7” Surface mount cabinet pull. 5 5/8” center-to-center.

Page 56: Spec 24G Cabinet Hardware

Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m

PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.

24-56

Revised 06/20/16

Illustrations are for demonstration purposes only.

5/8” Wood screws included.

Surface mount sash pulls.

SP-10 – SP-700 SURFACE MOUNT SASH PULLS

SP-400 – Surface mount sash pull. – 4 3/8" center-to-center. – 1/2" face width.

1 1/4"

5"

SP-500 – Surface mount sash pull. – 4 15/16" center-to-center. – 1/2" face width.

5 3/

4"

SP-700 – Surface mount sash pull. – 6 1/8" center-to-center. – 1/2" face width.

1"1 1/16"

7"

SP-10 – Surface mount sash pull. – 9 3/4" center-to-center. – 1/2" face width.

10 5

/8"

1 3/8" 1 1/16"1 1/4"

1 1/4" 1 1/16"

5/16" 5/16" 5/16" 5/16"

1 1/

8"

1 1/

8"

1 1/

8"

1 1/

8"

SP-18 – Surface mount sash pull. – 17 1/4" center-to-center. – 1/2" face width.

18"

1 1/4" 1 1/16"

5/16"

1 1/

8"

SP-10 10 5/8” Surface mount sash pull. 9 3/4” center-to-center.

SP-18 18” Surface mount sash pull. 17 1/4” center-to-center.

SP-400 5” Surface mount sash pull. 4 3/8” center-to-center.

SP-500 5 3/4” Surface mount sash pull. 4 15/16” center-to-center.

SP-700 7” Surface mount sash pull. 6 1/8” center-to-center.

Page 57: Spec 24G Cabinet Hardware

Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m

PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.

24-57

Revised 06/20/16

Illustrations are for demonstration purposes only.

1 3/4” Break off screws included.

Corduroy cabinet pulls.

CK-9204CDRY – CK-9213CDRY CORDUROY CABINET PULLS

CK-9204CDRY – Corduroy cabinet pull. – 3 3/4" center-to-center.

CK-9206CDRY – Corduroy cabinet pull. – 5 3/4" center-to-center.

CK-9208CDRY – Corduroy cabinet pull. – 7 11/16" center-to-center.

4"

2"7/8"

6"

2"7/8"

8"

2"7/8"

1/4"

1/4"

1/4"

CK-9210CDRY – Corduroy cabinet pull. – 9 11/16" center-to-center.

10"

2"7/8"

1/4"

CK-9213CDRY – Corduroy cabinet pull. – 7 11/16" center-to-center.

8"

1"7/8"

1/4"

CK-9204CDRY 4” Corduroy cabinet pull. 3 3/4” center-to-center.

CK-9206CDRY 6” Corduroy cabinet pull. 5 3/4” center-to-center.

CK-9208CDRY 8” Corduroy cabinet pull. 7 11/16” center-to-center.

CK-9210CDRY 10” Corduroy cabinet pull. 9 11/16” center-to-center.

CK-9213CDRY 8” Corduroy cabinet pull. 7 11/16” center-to-center.

Page 58: Spec 24G Cabinet Hardware

Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m

PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.

24-58

Revised 06/20/16

Illustrations are for demonstration purposes only.

Corduroy cabinet pulls.

1 3/4” Break off screws included.

CK-1904CDRY CORDUROY CABINET PULLS

CK-1904CDRY – Corduroy cabinet pull. – 1 1/2" center-to-center.

1/4"

4"

2 3/

4" 3/4"

3/4"

3"

3/4"

SIDE VIEW

CK-1904CDRY 4” x 2 3/4” x 1/4” Corduroy cabinet pull. 1 1/2” center-to-center.

Page 59: Spec 24G Cabinet Hardware

Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m

PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.

24-59

Revised 06/20/16

Illustrations are for demonstration purposes only.

1 3/4” Break off screws included.

Extended T-handle cabinet pulls. *AVAILABLE BACK-TO-BACK.

CK-228 EXTENDED T-HANDLE CABINET PULLS

CK-228* – Extended T-handle cabinet pull. – 10" center-to-center. – 5/8" face width. – *AVAILABLE BACK-TO-BACK.

2"

14"

5/8"

7/8"

7/16"

9/16"

1 1/

2"

CK–228 14” Extended T-handle cabinet pull. 10” center-to-center.*

Page 60: Spec 24G Cabinet Hardware

Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m

PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.

24-60

Revised 06/20/16

Illustrations are for demonstration purposes only.

1 3/4” Break off screws included.

Bamboo cabinet pulls.

CK-1305 – CK-1307 BAMBOO CABINET PULLS

CK-1305 – Bamboo cabinet pull – 3" center-to-center. – 3/8" round.

1 3/8"5

3/8"

CK-1306 – Bamboo cabinet pull – 3 11/16" center-to-center. – 7/16" round.

CK-1307 – Bamboo cabinet pull – 4 3/8" center-to-center. – 7/16" round.

1 3/8"

6"

1 1/2"

8"

3/8"

7/16

"

7/16

"

7/16

"

7/16"

7/16"

CK-1305 5 3/8” Bamboo cabinet pull. 3” center-to-center.

CK-1306 6” Bamboo cabinet pull. 3 11/16” center-to-center.

CK-1307 8” Bamboo cabinet pull. 4 3/8” center-to-center.

Page 61: Spec 24G Cabinet Hardware

Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m

PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.

24-61

Revised 06/20/16

Illustrations are for demonstration purposes only.

1 3/4” Break off screws included.

Twig cabinet pulls.

CK-721 – CK-722 TWIG CABINET PULLS

CK-721 – Twig cabinet pull – 5" center-to-center. – 7/16" round.

2"

7 1/

8"

2 1/8"

7 3/

4"

CK-722 – Twig cabinet pull – 6 1/8" center-to-center. – 1/2" round.

7/16"1/2"

7/16

"

7/16

"

CK-721 7 1/8” Small twig pull. 5” center-to-center.

CK-722 7 3/4” Large twig pull. 6 1/8” center-to-center.

Page 62: Spec 24G Cabinet Hardware

Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m

PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.

24-62

Revised 06/20/16

Illustrations are for demonstration purposes only.

1 3/4” Break off screws included.

Cactus cabinet pulls.

CK-725 – CK-729 CACTUS CABINET PULLS

CK-725 – Cactus cabinet pull. – 5 1/8" center-to-center. – 5/8" face width.

2"7

1/8"

CK-727 – Cactus cabinet pull. – 6 1/8" center-to-center. – 3/4" face width.

2"

8"

5/8"

1/2" 9/16

"

3/4"

7/16" 7/16"

CK-729 – Cactus cabinet pull. – 8 3/16" center-to-center. – 3/4" face width.

2"

10"

9/16

"

3/4"

7/16"

CK-725 7 1/8” Cactus pull. 5 1/8” center-to-center.

CK-727 8” Cactus pull. 6 1/8” center-to-center.

CK-729 10” Cactus pull. 8 3/16” center-to-center.

Page 63: Spec 24G Cabinet Hardware

Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m

PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.

24-63

Revised 06/20/16

Illustrations are for demonstration purposes only.

CK-LP3, CK-LP3R, CK-LP124 THE LIFT CABINET PULLS

The Lift cabinet pulls.

1 3/4” Break off screws included.

5/8"

3 1/

8"

3/4"

CK-LP3R – The Lift closed end cabinet pull w/return. – 1.87" center-to-center.

1/16"

5/32

"5/8"

3 1/

8"

CK-LP3 – The Lift cabinet pull. – 1.87" center-to-center.

1/16"

CK-LP124 – The Lift open end cabinet pull w/return. – 1 1/8" center-to-center.

1"

4"

3/4"

1/4"

1 7/

8"

CK-LP3 3 1/8” The Lift cabinet pull. 1.87” center-to-center.

CK-LP3R 3 1/8” The Lift closed end cabinet pull w/return. 1.87” center-to-center.

CK-LP124 4” The Lift open end cabinet pull. 1 1/8” center-to-center.

Page 64: Spec 24G Cabinet Hardware

Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m

PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.

24-64

Revised 06/20/16

Illustrations are for demonstration purposes only.

The Lift cabinet pulls.

1 3/4” Break off screws included.

CK-LA258, CK-LA258H, CK-LA350, CK-LA350H THE LIFT CABINET PULLS

31/3

2"

CK-LA258 – The Lift small cabinet pull. – 2.275" center-to-center.

2 5/8"

CK-LA350H – The Lift horizontal large cabinet pull. – 3" center-to-center.

3 1/2"

31/3

2"1/

4"

1/4"

Back

2 5/8"

31/3

2"

CK-LA258H – The Lift horizontal small cabinet pull. – 2 1/4" center-to-center.

1/4" Back

CK-LA350 – The Lift large cabinet pull. – 3.15" center-to-center.

31/3

2"3 1/2"

1/4"

Back

Back

CK-LA258 2 5/8” The Lift small cabinet pull. 2.275” center-to-center.

CK-LA350 3 1/2” The Lift large cabinet pull. 3.15” center-to-center.

CK-LA258H 2 5/8” The Lift horizontal small cabinet pull. 2 1/4” center-to-center.

CK-LA350H 3 1/2” The Lift horizontal large cabinet pull. 3” center-to-center.

Page 65: Spec 24G Cabinet Hardware

Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m

PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.

24-65

Revised 06/20/16

Illustrations are for demonstration purposes only.

The Lift edge pull.

1 3/4” Break off screws included.

CK-LW550 THE LIFT EDGE PULL

CK-LW550 5 1/2” The Lift edge pull.

CK-LW550 – The Lift edge pull. – 1 1/8" projection.

5 1/2"

1 1/

2"

1 1/8"

Page 66: Spec 24G Cabinet Hardware

Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m

PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.

24-66

Revised 06/20/16

Illustrations are for demonstration purposes only.

Bin pulls.

5/8” Wood screws included.

CK-506 – CK-508, CK-609 BIN PULLS

CK-506 – Blind mount bin pull without

screw holes. – 3 9/16" center-to-center.

4 1/8"

1 1/

2"

CK-507 – Surface mount bin pull. – 3 11/16" center-to-center.

CK-508 – Surface mount bin pull. – 4 1/4" center-to-center.

CK-609 – Surface mount bin pull. – 7 5/8" center-to-center.

4 1/8"

1 1/

2"

4 7/8"

2"

8 1/8"

1 1/

2"

CK-506 4 1/8” x 1 1/2” Blind mount bin pull w/o screw holes. 3 9/16” center-to-center.

CK-507 4 1/8” x 1 1/2” Surface mount bin pull. 3 11/16” center-to-center.

CK-508 4 7/8” x 2” Surface mount bin pull. 4 1/4” center-to-center.

CK-609 8 1/8” x 1 1/2” Surface mount bin pull. 7 5/8” center-to-center.

Page 67: Spec 24G Cabinet Hardware

Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m

PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.

24-67

Revised 06/20/16

Illustrations are for demonstration purposes only.

5/8” Wood screws included.

Bin pulls.

CK-606 BIN PULLS

CK-606 – Surface mount bin pull. – 5" center-to-center.

5 3/4"

2 7/

16"

1 1/8"

CK-606 5 3/4” x 2 7/16” Surface mount bin pull. 5” center-to-center.

Page 68: Spec 24G Cabinet Hardware

Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m

PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.

24-68

Revised 06/20/16

Illustrations are for demonstration purposes only.

5/8” Wood screws included.

Ridge bin pulls.

CK-603 RIDGE BIN PULLS

CK-603 – Ridge surface mount bin pull. – 3 7/8" center-to-center.

4 5/16"

1 1/

4"

CK-603 4 5/16” x 1 1/4” Ridge surface mount bin pull. 3 7/8” center-to-center.

Page 69: Spec 24G Cabinet Hardware

Te l 2 0 8 . 7 8 8 . 3 6 3 1 • To l l F r e e 8 6 6 . 7 8 8 . 3 6 3 1 • F a x 2 0 8 . 7 8 8 . 1 3 0 6 • w w w. s u n v a l l e y b r o n z e . c o m

PROPRIETARY AND CONFIDENTIAL: The information contained in this drawing is the sole property of Sun Valley Bronze. Any reproduction in part or as a whole without the written permission of Sun Valley Bronze is prohibited.

24-69

Revised 06/20/16

Illustrations are for demonstration purposes only.

5/8” Wood screws included.

Cabinet latches.

CK-599RH – CK-600LH, CK-650 CABINET LATCHES

CK-599 – Cabinet latch. – Latch bar 7/16" past plate edge. – Specify left or right.

CK-600 – Cabinet latch. – Latch bar 7/16" past plate edge. – Specify left or right.

1 5/8"

1 3/

4"

1 5/8"

1 3/

4"

2" 2"

Left Right Left Right

3/8" 3/8" 3/8" 3/8"

CK-650 – Cabinet latch. – Right hand. – Specify handing.

1"

2 3/

8"

1"

3 7/8"

1 5/8"

CK-600L – Cabinet latch w/extended latch bar. – Latch bar 1 1/8" past plate edge. – Specify left or right.

1 3/

4"

2" 2"

Left Right

3/8" 3/8"

CK-599RH 1 5/8” x 1 3/4” Cabinet latch w/strike. Right hand.

CK-599LH 1 5/8” x 1 3/4” Cabinet latch w/strike. Left hand.

CK-600RH 2” x 1 3/4” Cabinet latch w/strike. Right hand.

CK-600LH 2” x 1 3/4” Cabinet latch w/strike. Left hand.

CK-600L-RH 2” x 1 3/4” Cabinet latch w/extended latch bar and strike. Right hand.

CK-600L-LH 2” x 1 3/4” Cabinet latch w/extended latch bar and strike. Left hand.

CK-650 3 7/8” x 2 3/8” Cabinet latch. Specify handing.*


Recommended