Lubrication is our world
Speciality lubricants for film stretching lines
Product catalogue
The company Industrial sector Special knowledge Detailed information
2
Quality pays Enhance your productivity Klüber is the market leader in the lubrication film stretching equipment Applications and lubricants Extrusion system Chill roll / cast roll unit MDO – Material Direction Orientator TDO – Transfer Direction Orientator Tension roll, winder, treatment Compressors & maintenance Notes
3
4
5
6
8
14
18
24
36
44
54
B154001002 / Edition 06.08
3
Quality paysYour benefits
Klüber lubricant specialities help to …
Reduce maintenance costs. •
Reduce operating costs. •
Reduce wear on all technical elements such as bearings, •chains and gears.
Reduce downtime. •
Extend oil change intervals. •
Improve film quality with compatible oils having a low •evaporation rate.
Save energy by reducing friction. •
Prevent failures to increase profits. •
Reduce downtime risk with reliable and proven products •backed by numerous references.
Reduce pipe blocking and residues in TDOs. •
Meet safety standards with less toxic chemicals. •
Save money through lower lubricant consumption. •
Make your line reliable with OEM-approved lubricants. •
Ensure continuous improvement in close contact with the •OEMs for your future benefit.
4
Enhance your productivityContinuous profit with special lubricants
24 hours a day, 365 days a year – demands on plastic film stretching lines are constantly increasing. This has caused operating conditions throughout these lines to become much tougher: the materials used are today more demanding, temperatures, loads and speed are rising as machine designs are becoming ever more compact. Standard lubricants have reached the limit of their capacities. Lubricant specialities made by Klüber Lubrication have been developed to address your needs:
Higher efficiency with reduced friction coefficient•Lower energy consumption•Lower maintenance costs•Lower operational costs•Less wear to extend the service life of your film stretching •line
Klüber Lubrication supplies you worldwide with all lubricants for your film stretching equipment, offering the following benefits:
Saving with single sourcing:The wide product range of Klüber Lubrication enables you to run your line with only a few lubricants from just one supplier. This will save you money, warehouse resources and lead to less lubrication errors.
Worldwide on-site service, also in your region:Klüber Lubrication is represented world wide. You can easily reduce your working capital by concluding short-term delivery agreements. If you need any kind of assistance and lubrication guidance – Klüber Lubrication can be contacted somewhere near you.
You will find your closest Klüber Lubrication contact at www.klueber.com
Klüber worldwide
Subsidiaries and sales offices
5
Klüber is the market leader in the lubrication of film stretching equipmentExperience, references and approvals
Klüber Lubrication is the world market leader in lubricants for film stretching lines. We have ample experience, references and approvals for our reliable products.
We work closely together with the leading OEMs of film stretching equipment to address their individual and exclusive engineering needs. Our lubricants run on all types of film stretching lines producing polymer films such as PP, PA, PET, PS, PVC, and others, to produce all kinds of film products:Tape based films, cigarette wrapping, highly transparent packaging films, thick PET films for optical or technical applications, multi-layer films, high-shrink films, high-barrier films, ultra-thin capacitor films, synthetic papers, labels and more.
We optimise your performance, your productivity and your profitability with Klüber speciality lubricants.
Klüber Lubrication belongs to the Freudenberg Group and is a member of the Business Division Freudenberg Chemical Specialities KG in Germany. Klüber Lubrication develops, produces and sells special lubricant solutions for all kinds of applications and markets.
Our unique range of more than 1,500 special lubricants and our know-how backed by more than 75 years of experience in research, testing and development, make us one of the world’s leading special lubricant suppliers. 15 production locations, 30 subsidiaries and more than 1,700 employees all over the world provide also a dedicated service to our customers.Due to the outstanding quality and the high production standard of our lubricants, they also meet certification standards. Klüber Lubrication is certified under the quality standards ISO 9001, ISO 14001, ISO/TS 16949 and OHSAS 18001. We not only meet “standard“ standards like those of DIN and ISO, but are particularly dedicated to respond to the individual quality needs and requirements of our customers worldwide.
6
Klüber offers products for all applications in your film stretching line:
High-temperature and extreme-pressure • pastesLong-life/high-load • gear oilsHigh-temperature • bearing greasesLong-life • compressor oilsLubricants approved for use in the food-processing •industryLong-life • hydraulic oilsConductive bearing greases•Extreme-pressure bearing greases•High-temperature • chain oilsSpecial • vacuum pump fluidsDry lubrication• specialitiesRelease agents•High-quality • maintenance lubricants
Applications and lubricants
8
Extrusion system
Extruder gear boxKlüberoil GEM 1 N oils•Klübersynth GEM 4 N oils•Klübersynth GH 6 oils•
Extruder screw shaft, melt filterKlüberpaste HEL 46-450•Klüberpaste UH1 96-402•
Extruder motor bearingPETAMO• GHY 133 NKlüberlub BE 41-542•Klüberquiet BQH 72-102•
Film dieKlüberpaste HEL 46-450•Klüberpaste UH1 96-402•UNISILKON M 2000 Spray•Klüberfood NH1 K 32 Spray•
10
Extruder gear box
Application Product Article number Description Pack sizes Benefit
High-performance mineral extruder gear oil Klüberoil GEM 1 NISO VG 150 ISO VG 220 ISO VG 320 ISO VG 460 ISO VG 680
030057 030058 030062 030063 030064
Mineral base oil•Conforms to DIN 51517 CLP•Pitting resistance > 10, at 60 °C and 90 °C•Passed FE 8 test at 120 °C, 500 h, 80 kN•High load carrying capacity: FZG load stage ≥ 13•
200 l drum20 l canister
Particularly suitable for heavily loaded bearings.•Less leakage due to good compatibility with shaft seals.•Recommended by Brückner.•
Long-life extruder gear oil Klübersynth GEM 4 N ISO VG 150ISO VG 220 ISO VG 320ISO VG 460 ISO VG 680
012233 012234 012235 012236 012237
PAO base oil•Conforms to DIN 51 517 CLP HC•Pitting resistance > 10, at 60 °C and 90 °C•Passed FZG test at 140 °C•High load carrying capacity: FZG load stage ≥ 14 •Passed FE 8 test•
200 l drum20 l canister
Easy changeover from mineral oils to synthetic oils with the •advantage of a longer oil lifetime.Low foaming tendency.•Recommended by Brückner.•
High-end extruder gear oil Klübersynth GH 6 ISO VG 150ISO VG 220ISO VG 320ISO VG 460ISO VG 680ISO VG 1000
012160 012161 012162 012163 012164 012165
Polyglycol base oil•Conforms to DIN 51 517 CLP PG•Pitting resistance > 10, at 60 °C and 90 °C•Passed FZG test at 140 °C•Passed FE 8 test•High load carrying capacity: FZG load stage ≥ 14•Passed API GL5, ISO VG 320 or higher •
200 l drum20 l canister5 l canister
Very long oil life.•Very low residues for a long lifetime especially of the •bearings. Less leakage due to good compatibility with shaft seals.•Many approvals, e.g. by Friedr. Flender, SEW, ZAE, Lenze, •Getriebebau Nord, Bonfiglioli.Especially for worm gears and spur gears.•Recommended by Brückner and DMT.•Reduces friction and wear due to a high viscosity index. •Saves energy due to the special friction behaviour of the Klüber •polyclycol base oil. High load resistance.•
Extruder motor bearing
Application Product Article Number Description Pack sizes Benefit
High-performance multi-purpose bearing and seal grease PETAMO GHY 133 N 094061 Semi-synthetic base oil [V• 40 = 160 mm²/s]Polyurea thickener•Service temperature range: -30 °C to +160 °C•NLGI 2•Passed FAG FE 9 test at 160 °C•
180 kg drum25 kg bucket1 kg can400 g cartridge
Less maintenance due to long-term grease enabling lifetime •lubrication.Wide service temperature range enabling many different •applications.Good compatiblity with NBR and FKM elastomers.•Grease for long-term and lifetime lubrication.•
Heavy-duty bearing grease Klüberlub BE 41-542 020269 High-viscosity mineral oil [V• 40 = 540 mm²/s]Special lithium soap thickener•Service temperature range: -20 °C to +140 °C•NLGI 2•Passed FAG FE 9 test at 140 °C•
180 kg drum25 kg bucket
Less maintenance especially in bearings operating under high •loads.High load carrying capacity grease for low and medium speeds.•
Fully synthetic rolling bearing grease Klüberquiet BQH 72-102 094023 Synthetic base oil [V• 40 = 100 mm²/s]Polyurea thickener•Service temperature range: -40 °C to +180 °C•Passed FAG FE 9 test at 180 °C•NLGI 2•
25 kg bucket1 kg can400 g cartridge
Cost savings due to long service intervals.•Very wide service temperature range enabling many different •applications.Smooth running and low noise.•Tried and tested, with many references.•For long-term and lifetime lubrication at high temperatures.•For rolling bearings capped or sealed on both sides.•
11
Application Product Article number Description Pack sizes Benefit
High-performance mineral extruder gear oil Klüberoil GEM 1 NISO VG 150 ISO VG 220 ISO VG 320 ISO VG 460 ISO VG 680
030057 030058 030062 030063 030064
Mineral base oil•Conforms to DIN 51517 CLP•Pitting resistance > 10, at 60 °C and 90 °C•Passed FE 8 test at 120 °C, 500 h, 80 kN•High load carrying capacity: FZG load stage ≥ 13•
200 l drum20 l canister
Particularly suitable for heavily loaded bearings.•Less leakage due to good compatibility with shaft seals.•Recommended by Brückner.•
Long-life extruder gear oil Klübersynth GEM 4 N ISO VG 150ISO VG 220 ISO VG 320ISO VG 460 ISO VG 680
012233 012234 012235 012236 012237
PAO base oil•Conforms to DIN 51 517 CLP HC•Pitting resistance > 10, at 60 °C and 90 °C•Passed FZG test at 140 °C•High load carrying capacity: FZG load stage ≥ 14 •Passed FE 8 test•
200 l drum20 l canister
Easy changeover from mineral oils to synthetic oils with the •advantage of a longer oil lifetime.Low foaming tendency.•Recommended by Brückner.•
High-end extruder gear oil Klübersynth GH 6 ISO VG 150ISO VG 220ISO VG 320ISO VG 460ISO VG 680ISO VG 1000
012160 012161 012162 012163 012164 012165
Polyglycol base oil•Conforms to DIN 51 517 CLP PG•Pitting resistance > 10, at 60 °C and 90 °C•Passed FZG test at 140 °C•Passed FE 8 test•High load carrying capacity: FZG load stage ≥ 14•Passed API GL5, ISO VG 320 or higher •
200 l drum20 l canister5 l canister
Very long oil life.•Very low residues for a long lifetime especially of the •bearings. Less leakage due to good compatibility with shaft seals.•Many approvals, e.g. by Friedr. Flender, SEW, ZAE, Lenze, •Getriebebau Nord, Bonfiglioli.Especially for worm gears and spur gears.•Recommended by Brückner and DMT.•Reduces friction and wear due to a high viscosity index. •Saves energy due to the special friction behaviour of the Klüber •polyclycol base oil. High load resistance.•
Application Product Article Number Description Pack sizes Benefit
High-performance multi-purpose bearing and seal grease PETAMO GHY 133 N 094061 Semi-synthetic base oil [V• 40 = 160 mm²/s]Polyurea thickener•Service temperature range: -30 °C to +160 °C•NLGI 2•Passed FAG FE 9 test at 160 °C•
180 kg drum25 kg bucket1 kg can400 g cartridge
Less maintenance due to long-term grease enabling lifetime •lubrication.Wide service temperature range enabling many different •applications.Good compatiblity with NBR and FKM elastomers.•Grease for long-term and lifetime lubrication.•
Heavy-duty bearing grease Klüberlub BE 41-542 020269 High-viscosity mineral oil [V• 40 = 540 mm²/s]Special lithium soap thickener•Service temperature range: -20 °C to +140 °C•NLGI 2•Passed FAG FE 9 test at 140 °C•
180 kg drum25 kg bucket
Less maintenance especially in bearings operating under high •loads.High load carrying capacity grease for low and medium speeds.•
Fully synthetic rolling bearing grease Klüberquiet BQH 72-102 094023 Synthetic base oil [V• 40 = 100 mm²/s]Polyurea thickener•Service temperature range: -40 °C to +180 °C•Passed FAG FE 9 test at 180 °C•NLGI 2•
25 kg bucket1 kg can400 g cartridge
Cost savings due to long service intervals.•Very wide service temperature range enabling many different •applications.Smooth running and low noise.•Tried and tested, with many references.•For long-term and lifetime lubrication at high temperatures.•For rolling bearings capped or sealed on both sides.•
12
Film die
Application Product Article Number Description Pack sizes Benefit
High-temperature multi-purpose paste Klüberpaste HEL 46-450 089032 Low-viscosity synthetic base oil •Service temperature range: -40 °C to +1000 °C •(above 200 °C dry lubrication)
30 kg bucket750 g can600 g cartridge70 g tube
Lubrication and assembly paste for all types of connection.•Easy release also after long time at high temperatures.•Reliable screw connections in combination with constant and •sufficient preload force.
High-performance white lubricating and assembly paste Klüberpaste UH1 96-402 005116 White and metal-free•High-viscosity synthetic base oil•Service temperature range: -40 °C to +1200 °C •(above 200 °C dry lubrication)
30 kg bucket750 g can600 g cartridge80 g tube
Certified for use in the food-processing industry.•White paste for clean appearance in production areas.•Very low friction coefficient due to good adhesion on metal •surfaces.Prevents fretting corrosion.•Eco-friendly: water pollution category 1.•
Release agent for the plastics industry UNISILKON M 2000 Spray 081161 Solvent-free silicone-based spray •Colourless (waterwhite)•
250 ml spray Does not affect plastic surfaces.•Protection and impregnating agent for plastic products.•Registered as NSF H1 for use in the food-processing industry.•Efficient protection against sticking and residue formation.•
Anticorrosive spray for dies Klüberfood NH1 K 32 Spray 081276 Especially developed for die protection•Approved according to DIN EN ISO 6270 •– condensation waterApproved according to DIN EN ISO 9227 – salt •water
400 ml spray Registered as NSF H1 for use in the food-processing industry.•Good penetration.•Repels moisture.•Long-term stable transparent protective film.•
Application Product Article Number Description Pack sizes Benefit
High-temperature multi-purpose paste Klüberpaste HEL 46-450 089032 Low-viscosity synthetic base oil•Service temperature range: -40 °C to +1000 °C •(above 200 °C dry lubrication)
30 kg bucket750 g can600 g cartridge70 g tube
Easy release also after long time at high temperatures.•Reliable screw connections in combination with constant and •sufficient preload force.Lubricating and assembly paste for all types of connection.•
High-performance white lubricating and assembly paste Klüberpaste UH1 96-402 005116 White and metal-free•Highly viscous synthetic base oil•Service temperature range: -40 °C to +1200 °C •(above 200 °C dry lubrication)
30 kg bucket750 g can600 g cartridge80 g tube
NSF H1 certified.•White paste for clean appearance in production areas.•Very low friction coefficient due to good adhesion on metal •surfaces.Prevents fretting corrosion.•Eco-friendly: water pollution category 1.•
Extruder screw shaft
13
Application Product Article Number Description Pack sizes Benefit
High-temperature multi-purpose paste Klüberpaste HEL 46-450 089032 Low-viscosity synthetic base oil •Service temperature range: -40 °C to +1000 °C •(above 200 °C dry lubrication)
30 kg bucket750 g can600 g cartridge70 g tube
Lubrication and assembly paste for all types of connection.•Easy release also after long time at high temperatures.•Reliable screw connections in combination with constant and •sufficient preload force.
High-performance white lubricating and assembly paste Klüberpaste UH1 96-402 005116 White and metal-free•High-viscosity synthetic base oil•Service temperature range: -40 °C to +1200 °C •(above 200 °C dry lubrication)
30 kg bucket750 g can600 g cartridge80 g tube
Certified for use in the food-processing industry.•White paste for clean appearance in production areas.•Very low friction coefficient due to good adhesion on metal •surfaces.Prevents fretting corrosion.•Eco-friendly: water pollution category 1.•
Release agent for the plastics industry UNISILKON M 2000 Spray 081161 Solvent-free silicone-based spray •Colourless (waterwhite)•
250 ml spray Does not affect plastic surfaces.•Protection and impregnating agent for plastic products.•Registered as NSF H1 for use in the food-processing industry.•Efficient protection against sticking and residue formation.•
Anticorrosive spray for dies Klüberfood NH1 K 32 Spray 081276 Especially developed for die protection•Approved according to DIN EN ISO 6270 •– condensation waterApproved according to DIN EN ISO 9227 – salt •water
400 ml spray Registered as NSF H1 for use in the food-processing industry.•Good penetration.•Repels moisture.•Long-term stable transparent protective film.•
Application Product Article Number Description Pack sizes Benefit
High-temperature multi-purpose paste Klüberpaste HEL 46-450 089032 Low-viscosity synthetic base oil•Service temperature range: -40 °C to +1000 °C •(above 200 °C dry lubrication)
30 kg bucket750 g can600 g cartridge70 g tube
Easy release also after long time at high temperatures.•Reliable screw connections in combination with constant and •sufficient preload force.Lubricating and assembly paste for all types of connection.•
High-performance white lubricating and assembly paste Klüberpaste UH1 96-402 005116 White and metal-free•Highly viscous synthetic base oil•Service temperature range: -40 °C to +1200 °C •(above 200 °C dry lubrication)
30 kg bucket750 g can600 g cartridge80 g tube
NSF H1 certified.•White paste for clean appearance in production areas.•Very low friction coefficient due to good adhesion on metal •surfaces.Prevents fretting corrosion.•Eco-friendly: water pollution category 1.•
14
Chill roll / cast roll unit
Service position spindleKlüberlub BE 41-542•Klüberplex BE 31-102, -222, -502•ALTEMP Q NB 50•
Chill roll bearingsKlüberlub BE 41-542•Klüberplex BE 31-102, -222, -502•PETAMO GHY 133 N•Klüberlub BE 71-501•
Chill roll driveKlübersynth GEM 1 N oils•Klübersynth GEM 4 N oils•
16
Service position spindle
Application Product Article Number Description Pack sizes Benefit
Heavy-duty bearing grease Klüberlub BE 41-542 020269 High-viscosity mineral oil [V• 40 = 540 mm²/s]Special lithium soap•Service temperature range: -20 °C to +140 °C•NLGI 2•Passed FAG FE 9 test at 140 °C•
180 kg drum25 kg bucket
Less maintenance especially in bearings operating under high •loads.Fulfills the FAG requirements for heavy-duty greases.•High load carrying capacity grease for low and medium speeds.•
Greases for extreme requirements Klüberplex BE 31-222502
017132 017126
Mineral base oil •Special calcium soap thickener •Service temperature range: up to +140 °C •NLGI 2 and 2/3•High load carrying capacity•
1 kg can25 kg bucket
Very good wear protection.•Very good media resistance.•Strong adhesion.•High resistance to oxidation and ageing.•Fulfills the FAG requirements for heavy-duty greases.•
Multi-purpose lubricating paste for high loads ALTEMP Q NB 50 005011 Mineral base oil•Barium complex soap thickener•Solid lubricants•Service temperature range: -15 °C to +150 °C•Paste with high static and dynamic load carrying •capacity
30 kg bucket750 g can600 g cartridge400 ml can80 g tube400 ml spray
Excellent wear protection.•Very good media resistance.•Good corrosion protection and strong adhesion.•Good protection against fretting corrosion.•Prevents stick-slip.•
Application Product Article Number Description Pack sizes Benefit
High-performance multi-purpose bearing and seal grease PETAMO GHY 133 N 094061 Semi-synthetic base oil [V• 40 = 160 mm²/s]Polyurea thickener•Service temperature range: -30 °C to +160 °C•NLGI 2•Passed FAG FE 9 test at 160 °C•
180 kg drum25 kg bucket1 kg can400 g cartridge
Less maintenance due to long-term grease enabling lifetime •lubrication.Wide service temperature range enabling many different •applications.Good compatiblity with NBR and FKM elastomers.•Grease for long-term and lifetime lubrication.•
Greases for extreme requirements Klüberplex BE 31-102222502
017135017132017126
Mineral base oil •Special calcium soap thickener •Service temperature range: up to +140 °C •(Klüberplex BE 31-102: up to +120 °C)High load carrying capacity•
1 kg can25 kg bucket
Very good wear protection.•Very good media resistance.•Strong adhesion.•High resistance to oxidation and ageing.•
Special grease for plain bearings Klüberlub BE 71-501 020160 Highly viscous mineral base oil•Polyurea thickener•Service temperature range -20 °C to +140 °C•NLGI 1•
180 kg drum25 kg bucket
Special lubricant for plain bearings.•Good water resistance and sealing effect due to good adhesion.•Reduces grease consumption and extends relubrication inter-•vals.Can be applied by means of central lubrication systems.•
Chill roll / Cast unit bearings
17
Application Product Article Number Description Pack sizes Benefit
Heavy-duty bearing grease Klüberlub BE 41-542 020269 High-viscosity mineral oil [V• 40 = 540 mm²/s]Special lithium soap•Service temperature range: -20 °C to +140 °C•NLGI 2•Passed FAG FE 9 test at 140 °C•
180 kg drum25 kg bucket
Less maintenance especially in bearings operating under high •loads.Fulfills the FAG requirements for heavy-duty greases.•High load carrying capacity grease for low and medium speeds.•
Greases for extreme requirements Klüberplex BE 31-222502
017132 017126
Mineral base oil •Special calcium soap thickener •Service temperature range: up to +140 °C •NLGI 2 and 2/3•High load carrying capacity•
1 kg can25 kg bucket
Very good wear protection.•Very good media resistance.•Strong adhesion.•High resistance to oxidation and ageing.•Fulfills the FAG requirements for heavy-duty greases.•
Multi-purpose lubricating paste for high loads ALTEMP Q NB 50 005011 Mineral base oil•Barium complex soap thickener•Solid lubricants•Service temperature range: -15 °C to +150 °C•Paste with high static and dynamic load carrying •capacity
30 kg bucket750 g can600 g cartridge400 ml can80 g tube400 ml spray
Excellent wear protection.•Very good media resistance.•Good corrosion protection and strong adhesion.•Good protection against fretting corrosion.•Prevents stick-slip.•
Application Product Article Number Description Pack sizes Benefit
High-performance multi-purpose bearing and seal grease PETAMO GHY 133 N 094061 Semi-synthetic base oil [V• 40 = 160 mm²/s]Polyurea thickener•Service temperature range: -30 °C to +160 °C•NLGI 2•Passed FAG FE 9 test at 160 °C•
180 kg drum25 kg bucket1 kg can400 g cartridge
Less maintenance due to long-term grease enabling lifetime •lubrication.Wide service temperature range enabling many different •applications.Good compatiblity with NBR and FKM elastomers.•Grease for long-term and lifetime lubrication.•
Greases for extreme requirements Klüberplex BE 31-102222502
017135017132017126
Mineral base oil •Special calcium soap thickener •Service temperature range: up to +140 °C •(Klüberplex BE 31-102: up to +120 °C)High load carrying capacity•
1 kg can25 kg bucket
Very good wear protection.•Very good media resistance.•Strong adhesion.•High resistance to oxidation and ageing.•
Special grease for plain bearings Klüberlub BE 71-501 020160 Highly viscous mineral base oil•Polyurea thickener•Service temperature range -20 °C to +140 °C•NLGI 1•
180 kg drum25 kg bucket
Special lubricant for plain bearings.•Good water resistance and sealing effect due to good adhesion.•Reduces grease consumption and extends relubrication inter-•vals.Can be applied by means of central lubrication systems.•
18
MDO – Machine Direction Orientator
Gear box stretching rolls – motor bearingPETAMO GHY 133 N•Klüberlub BE 41-542•Klüberquiet BQH 72-102 •
Gear box stretching rollsKlübersynth GH 6 oils •
Cardan joints stretching rollsKlüberplex BE 31-102, -222, -502•STABURAGS NBU 12/300 KP•Klüberplex BEM 34-132•STABURAGS NBU 8 EP •
Bearing rotary feed-throughPETAMO GHY 441•Klübersynth BH 72-422 •
Adjusting spindles of stretching rollsSTABURAGS NBU 12/300 KP•Klüberplex BEM 34-132 •
Feeding chainKlübersynth CH 2-100 N Spray •
Knife guideMICROLUBE GL 261 Spray•
20
MDO – gear box stretching rolls – motor bearing
MDO – gear boxes
Application Product Article Number Description Pack sizes Benefit
High-performance multi-purpose bearing and seal grease PETAMO GHY 133 N 094061 Semi-synthetic base oil [V• 40 = 160 mm²/s]Polyurea thickener•Service temperature range: -30 °C to +160 °C•NLGI 2•Passed FAG FE 9 test at 160 °C•
180 kg drum25 kg bucket1 kg can400 g cartridge
Less maintenance due to long lifetime lubrication.•Wide service temperature range enabling many different •applications.Good compatiblity with NBR and FKM elastomers.•Grease for long-term and lifetime lubrication.•
Heavy-duty bearing grease Klüberlub BE 41-542 020269 High-viscosity mineral oil [V• 40 = 540 mm²/s]Special lithium soap thickener•Service temperature range: -20 °C to +140 °C•NLGI 2•Passed FAG FE 9 test at 140 °C •
180 kg drum25 kg bucket
Less maintanance especially of heavily loaded bearings.•Fulfills the FAG requirements for heavy-duty greases.•High load carrying capacity grease for low and medium speeds.•
Fully synthetic rolling bearing grease. Klüberquiet BQH 72-102 094023 Synthetic base oil [V• 40 = 100 mm²/s]Polyurea thickener•Service temperature range: -40 °C to +180 °C•Passed FAG FE 9 test at 180 °C•NLGI 2•
25 kg bucket1 kg can400 g cartridge
Cost savings due to long service intervals.•Very wide service temperature range enabling many different •applications.Smooth running and low noise. •Backed by numerous references.•For long-term and lifetime lubrication at high temperatures.•
Application Product Article Number Description Pack sizes Benefit
High-end gear oil Klübersynth GH 6 ISO VG 150ISO VG 220ISO VG 320ISO VG 460ISO VG 680ISO VG 1000
012160 012161 012162 012163 012164 012165
Polyglycol base oil•Conforms to DIN 51 517 CLP PG•Pitting resistance > 10, at 60 °C and 90 °C•Passed FZG test at 140 °C•Passed FE 8 test•High load carrying capacity: FZG load stage ≥ 14•Passed API GL5, ISO VG 320 or higher •
200 l drum20 l canister5 l canister
Very long oil life; well proven in worm gears.•Very low residues for a long lifetime especially of the bearings.•Less leakage due to good compatibility with shaft seals.•Numerous approvals, e.g. by Friedr. Flender, SEW, ZAE, Lenze, •Getriebebau Nord, Bonfiglioli.Especially for worm gears.•Recommended by Brückner and DMT.•Reduces friction and wear due to a high viscosity index.•Saves energy due to the special behaviour of the Klüber poly-•clycol.
Application Product Article Number Description Pack sizes Benefit
Greases for extreme requirements Klüberplex BE 31-102222502
017135 017132 017126
Mineral base oil •Special calcium soap thickener •Service temperature range: up to +140 °C, •(Klüberplex BE 31-102: up to +120 °C)High load carrying capacity•
1 kg can25 kg bucket
Very good wear protection.•Very good media resistance.•Strong adhesion.•High resistance to oxidation and ageing.•
Long-life grease for rolling and plain bearings and for cardan shafts
STABURAGS NBU 12/300 KP 017062 Mineral base oil [V• 40 = 225 mm²/s]Barium complex soap thickener•Service temperature range: -20 °C to +130 °C•
400 g cartridges1 kg can25 kg bucket
Very good pressure absorption.•Good corrosion protection. •High resistance to water.•Well proven for this application.•
MDO – cardan joints of stretching rolls
21
Application Product Article Number Description Pack sizes Benefit
High-performance multi-purpose bearing and seal grease PETAMO GHY 133 N 094061 Semi-synthetic base oil [V• 40 = 160 mm²/s]Polyurea thickener•Service temperature range: -30 °C to +160 °C•NLGI 2•Passed FAG FE 9 test at 160 °C•
180 kg drum25 kg bucket1 kg can400 g cartridge
Less maintenance due to long lifetime lubrication.•Wide service temperature range enabling many different •applications.Good compatiblity with NBR and FKM elastomers.•Grease for long-term and lifetime lubrication.•
Heavy-duty bearing grease Klüberlub BE 41-542 020269 High-viscosity mineral oil [V• 40 = 540 mm²/s]Special lithium soap thickener•Service temperature range: -20 °C to +140 °C•NLGI 2•Passed FAG FE 9 test at 140 °C •
180 kg drum25 kg bucket
Less maintanance especially of heavily loaded bearings.•Fulfills the FAG requirements for heavy-duty greases.•High load carrying capacity grease for low and medium speeds.•
Fully synthetic rolling bearing grease. Klüberquiet BQH 72-102 094023 Synthetic base oil [V• 40 = 100 mm²/s]Polyurea thickener•Service temperature range: -40 °C to +180 °C•Passed FAG FE 9 test at 180 °C•NLGI 2•
25 kg bucket1 kg can400 g cartridge
Cost savings due to long service intervals.•Very wide service temperature range enabling many different •applications.Smooth running and low noise. •Backed by numerous references.•For long-term and lifetime lubrication at high temperatures.•
Application Product Article Number Description Pack sizes Benefit
High-end gear oil Klübersynth GH 6 ISO VG 150ISO VG 220ISO VG 320ISO VG 460ISO VG 680ISO VG 1000
012160 012161 012162 012163 012164 012165
Polyglycol base oil•Conforms to DIN 51 517 CLP PG•Pitting resistance > 10, at 60 °C and 90 °C•Passed FZG test at 140 °C•Passed FE 8 test•High load carrying capacity: FZG load stage ≥ 14•Passed API GL5, ISO VG 320 or higher •
200 l drum20 l canister5 l canister
Very long oil life; well proven in worm gears.•Very low residues for a long lifetime especially of the bearings.•Less leakage due to good compatibility with shaft seals.•Numerous approvals, e.g. by Friedr. Flender, SEW, ZAE, Lenze, •Getriebebau Nord, Bonfiglioli.Especially for worm gears.•Recommended by Brückner and DMT.•Reduces friction and wear due to a high viscosity index.•Saves energy due to the special behaviour of the Klüber poly-•clycol.
Application Product Article Number Description Pack sizes Benefit
Greases for extreme requirements Klüberplex BE 31-102222502
017135 017132 017126
Mineral base oil •Special calcium soap thickener •Service temperature range: up to +140 °C, •(Klüberplex BE 31-102: up to +120 °C)High load carrying capacity•
1 kg can25 kg bucket
Very good wear protection.•Very good media resistance.•Strong adhesion.•High resistance to oxidation and ageing.•
Long-life grease for rolling and plain bearings and for cardan shafts
STABURAGS NBU 12/300 KP 017062 Mineral base oil [V• 40 = 225 mm²/s]Barium complex soap thickener•Service temperature range: -20 °C to +130 °C•
400 g cartridges1 kg can25 kg bucket
Very good pressure absorption.•Good corrosion protection. •High resistance to water.•Well proven for this application.•
22
MDO – bearing in rotary feed-through
Application Product Article Number Description Pack sizes Benefit
High-temperature grease with high load carrying capacity PETAMO GHY 441 094051 Ester base oil [V• 40 = 440 mm²/s]Polyurea thickener•Service temperature range: - 30 °C to +180 °C•NLGI 1 •
400 g cartridge1 kg can25 kg bucket
High thermal stability.•Approved by film stretching OEMs for many years.•
High-temperature hybrid grease for plain and rolling bearings and slideways
Klübersynth BH 72-422 094072 PFPE, ester base oil •Polyurea thickener•Service temperature range: -20 °C to +220 °C•NLGI 2 •
500 g cartridge600 g can30 kg bucket
Very good thermal stability up to 220 °C.•Patented Klüber hybrid lubrication technology.•Approved by film stretching OEMs. •
MDO – feeding chain
MDO – knife guide
Application Product Article Number Description Pack sizes Benefit
High-temperature chain oil Klübersynth CH 2-100 N Spray 081091 Ester base oil•Service temperature range: 0 °C to +250 °C•
400 ml spray Easy handling and relubrication.•Protects the chain against corrosion at elevated temperatures.•No mechanical cleaning of the chain necessary.•
Application Product Article Number Description Pack sizes Benefit
Special sprayable grease for linear motion guides MICROLUBE GL 261 Spray 120101 Mineral base oil •Special lithium soap thickener•Free of solid lubricants•Service temperature range (data relating to •product without solvent): -30 °C to +140 °CNLGI 1•
250 ml spray Surface finish maintained for long periods; special protection •against fretting.Single spray for multiple applications with demanding conditions.•
Application Product Article Number Description Pack sizes Benefit
Long-life grease for rolling and plain bearings and for cardan shafts
STABURAGS NBU 12/300 KP 017062 Mineral base oil [V• 40 = 225 mm²/s]Barium complex soap thickener•Service temperature range: -20 °C to +130 °C•
400 g cartridges1 kg can25 kg bucket
Very good pressure absorption.•Good corrosion protection.•High resistance to water.•Well proven in this application.•
Semi-synthetic grease for bearings and linear motion guides Klüberplex BEM 34-132 017141 Synthetic hydrocarbon base oil plus mineral base •oil Special calcium soap thickener•Service temperature range: -35 °C to +140 °C•NLGI 2 •Passed FAG FE 9 test at 140 °C•
1 kg can25 kg bucket180 kg drum
Multi-purpose grease for demanding conditions.•Long service intervals.•Very good protection under micro-movements.•
MDO – adjusting spindles of stretching rolls
Semi-synthetic grease for bearings and linear motion guides Klüberplex BEM 34-132 017141 Synthetic hydrocarbon base oil plus mineral base •oil Special calcium soap thickener•Service temperature range: -35 °C to +140 °C•NLGI 2 •Passed FAG FE 9 test at 140 °C•
1 kg can25 kg bucket180 kg drum
Multi-purpose grease for demanding conditions.•Long service intervals. •Very good protection under micro-movements.•
Special grease for bearings STABURAGS NBU 8 EP 017105 Mineral base oil [V• 40 = 95 mm²/s]Barium complex soap thickener•Service temperature range: -20 °C to +140 °C•NLGI 2 •
400 g cartridges1 kg can25 kg bucket
Especially developed for high-speed bearings operating under •high load.Well proven over the last 20 years.•
23
Application Product Article Number Description Pack sizes Benefit
High-temperature grease with high load carrying capacity PETAMO GHY 441 094051 Ester base oil [V• 40 = 440 mm²/s]Polyurea thickener•Service temperature range: - 30 °C to +180 °C•NLGI 1 •
400 g cartridge1 kg can25 kg bucket
High thermal stability.•Approved by film stretching OEMs for many years.•
High-temperature hybrid grease for plain and rolling bearings and slideways
Klübersynth BH 72-422 094072 PFPE, ester base oil •Polyurea thickener•Service temperature range: -20 °C to +220 °C•NLGI 2 •
500 g cartridge600 g can30 kg bucket
Very good thermal stability up to 220 °C.•Patented Klüber hybrid lubrication technology.•Approved by film stretching OEMs. •
Application Product Article Number Description Pack sizes Benefit
High-temperature chain oil Klübersynth CH 2-100 N Spray 081091 Ester base oil•Service temperature range: 0 °C to +250 °C•
400 ml spray Easy handling and relubrication.•Protects the chain against corrosion at elevated temperatures.•No mechanical cleaning of the chain necessary.•
Application Product Article Number Description Pack sizes Benefit
Special sprayable grease for linear motion guides MICROLUBE GL 261 Spray 120101 Mineral base oil •Special lithium soap thickener•Free of solid lubricants•Service temperature range (data relating to •product without solvent): -30 °C to +140 °CNLGI 1•
250 ml spray Surface finish maintained for long periods; special protection •against fretting.Single spray for multiple applications with demanding conditions.•
Application Product Article Number Description Pack sizes Benefit
Long-life grease for rolling and plain bearings and for cardan shafts
STABURAGS NBU 12/300 KP 017062 Mineral base oil [V• 40 = 225 mm²/s]Barium complex soap thickener•Service temperature range: -20 °C to +130 °C•
400 g cartridges1 kg can25 kg bucket
Very good pressure absorption.•Good corrosion protection.•High resistance to water.•Well proven in this application.•
Semi-synthetic grease for bearings and linear motion guides Klüberplex BEM 34-132 017141 Synthetic hydrocarbon base oil plus mineral base •oil Special calcium soap thickener•Service temperature range: -35 °C to +140 °C•NLGI 2 •Passed FAG FE 9 test at 140 °C•
1 kg can25 kg bucket180 kg drum
Multi-purpose grease for demanding conditions.•Long service intervals.•Very good protection under micro-movements.•
Semi-synthetic grease for bearings and linear motion guides Klüberplex BEM 34-132 017141 Synthetic hydrocarbon base oil plus mineral base •oil Special calcium soap thickener•Service temperature range: -35 °C to +140 °C•NLGI 2 •Passed FAG FE 9 test at 140 °C•
1 kg can25 kg bucket180 kg drum
Multi-purpose grease for demanding conditions.•Long service intervals. •Very good protection under micro-movements.•
Special grease for bearings STABURAGS NBU 8 EP 017105 Mineral base oil [V• 40 = 95 mm²/s]Barium complex soap thickener•Service temperature range: -20 °C to +140 °C•NLGI 2 •
400 g cartridges1 kg can25 kg bucket
Especially developed for high-speed bearings operating under •high load.Well proven over the last 20 years.•
24
TDO – Transverse Direction Orientator
InletSTABURAGS NBU 12/300 KP•UNISILKON M 2000 Spray•LAMORA HLP oils•Klüberfood 4 NH1 32-100 •
Chain wheel – bearingSTABURAGS NBU 12/300 KP •Klübersynth BH 72-422•CENTOPLEX GLP 402•BARRIERTA L55/2 •
Sliding chainPRIMIUM SUPER M 93 •Klübersynth CH 2-280 •PRIMIUM SUPER •PRIMIUM FLUID SPECIAL •
ClipBARRIERTA L55/1 •
Flushing oil HOTEMP SUPER C 2-50•HOTEMP SUPER M 121 S •
Cleaning conditionerKlüber Summit Varnasolv •
Roller chainBARRIERTA L55 greases•Klüberalfa BH 83-292•Klübersynth CH2-280•PRIMIUM SUPER M 93•Klüberalfa LISIM Fluid •
Drive for chain track system – gear boxKlübersynth GH 6 oils•Klübersynth GEM 4 N oils•
Drive for chain track system – cardan jointKlüberplex BE 31-102, -202, -502•STABURAGS NBU 12/300 KP•Klüberplex BEM 34-132•
Width adjustment spindleWOLFRAKOTE TOP PASTE•MOLYBKOMBIN UMF T4 Spray •Klübersynth BH 72-422 •BARRIERTA L55 greases •
Fan bearingPETAMO GY 193•STABURAGS NBU 8 EP•
Pneumatic lubricationAIRPRESS 15•
26
TDO – inlet
Application Product Article Number Description Pack sizes Benefit
Long-life grease for width adjustment STABURAGS NBU 12/300 KP 017062 Mineral base oil [V• 40 = 225 mm²/s]Barium complex soap thickener•Service temperature range: -20 °C to +130 °C•
400 g cartridges1 kg can25 kg bucket
Very good pressure absorption.•Good corrosion protection.•High resistance to water.•
Release agent for the plastics industry UNISILKON M 2000 Spray 081161 Solvent-free, silicone-based spray •Colourless (waterwhite)•
250 ml spray Does not affect plastic surfaces.•Protection and impregnating agent for plastic products.•NSF H1-certified product for use in the food-processing •industry.Efficient protection against sticking and residue formation.•
Multi-purpose mineral-oil-based HLP hydraulic oil LAMORA HLP oils ISO VG 32 ISO VG 46 ISO VG 68
031007 031008 031009
Mineral base oil•Meets hydraulic oil standard DIN 51524 part 2 •Service temperature range: -12 °C to +120 °C•
20 l canister 200 l drum
Long oil change intervals due to the high quality of the base •oil developed according to Klüber‘s stringent raw material specifications.Low residue formation.•Easy to order as part of a Klüber supply package. •
Mineral-oil-free HLP hydraulic oil for use in the food-processing industry
Klüberfood 4 NH1 32-100ISO VG 32 ISO VG 46 ISO VG 68 ISO VG 100
050013 050014 050015 050016
Synthetic base oil •Meets HLP requirements•Meets VDL requirements •Service temperature range: up to +135 °C•
19 l canister208 l drum
Excellent oxidation stability enabling long-term use.•Certified as NSF H1 for use in the food-processing industry. •Very good air and water separating behaviour.•Very low residue formation reducing the need for maintenance.•
Application Product Article Number Description Pack sizes Benefit
Long-life grease for rolling and plain bearings, and for cardan shafts
STABURAGS NBU 12/300 KP 017062 Mineral base oil [V• 40 = 225 mm²/s]Barium complex soap thickener•Service temperature range: -20 °C to +130 °C•
400 g cartridges1 kg can25 kg bucket
Very good pressure absorption.•Good corrosion protection. •High resistance to water.•
Special grease for slow-running rolling and plain bearings operating under high loads
CENTOPLEX GLP 402 020189 Mineral base oil•Lithium soap thickener•Service temperature range: -20 °C to +130 °C•NLGI 2•
25 kg bucket180 kg drum
Very good price/performance ratio.•Good bearing protection due to very good adhesion and wear •protection.Approved by OEMs.•
High-temperature hybrid grease for plain and rolling bearings and for slideways
Klübersynth BH 72-422 094072 PFPE, ester base oil •Polyurea thickener•Service temperature range: -20 °C to +220 °C•NLGI 2 •
500 g cartridge600 g can30 kg bucket
High thermal stability up to 220 °C.•Patented high-end hybrid lubrication technology made by Klüber.•Approved by film stretching OEMs.•
High-end grease for very high temperatures and long-term lubrication
BARRIERTA L55/2 090013 PFPE base oil•PTFE thickener•Service temperature range: -40 °C to +260 °C•NLGI 2 •
1 kg can800 g cartridge10 kg bucket
Very high machine availability.•Very good compatibility with plastics.•Proven in numerous applications over many years.•
TDO – chain wheel – bearing
27
Application Product Article Number Description Pack sizes Benefit
Long-life grease for width adjustment STABURAGS NBU 12/300 KP 017062 Mineral base oil [V• 40 = 225 mm²/s]Barium complex soap thickener•Service temperature range: -20 °C to +130 °C•
400 g cartridges1 kg can25 kg bucket
Very good pressure absorption.•Good corrosion protection.•High resistance to water.•
Release agent for the plastics industry UNISILKON M 2000 Spray 081161 Solvent-free, silicone-based spray •Colourless (waterwhite)•
250 ml spray Does not affect plastic surfaces.•Protection and impregnating agent for plastic products.•NSF H1-certified product for use in the food-processing •industry.Efficient protection against sticking and residue formation.•
Multi-purpose mineral-oil-based HLP hydraulic oil LAMORA HLP oils ISO VG 32 ISO VG 46 ISO VG 68
031007 031008 031009
Mineral base oil•Meets hydraulic oil standard DIN 51524 part 2 •Service temperature range: -12 °C to +120 °C•
20 l canister 200 l drum
Long oil change intervals due to the high quality of the base •oil developed according to Klüber‘s stringent raw material specifications.Low residue formation.•Easy to order as part of a Klüber supply package. •
Mineral-oil-free HLP hydraulic oil for use in the food-processing industry
Klüberfood 4 NH1 32-100ISO VG 32 ISO VG 46 ISO VG 68 ISO VG 100
050013 050014 050015 050016
Synthetic base oil •Meets HLP requirements•Meets VDL requirements •Service temperature range: up to +135 °C•
19 l canister208 l drum
Excellent oxidation stability enabling long-term use.•Certified as NSF H1 for use in the food-processing industry. •Very good air and water separating behaviour.•Very low residue formation reducing the need for maintenance.•
Application Product Article Number Description Pack sizes Benefit
Long-life grease for rolling and plain bearings, and for cardan shafts
STABURAGS NBU 12/300 KP 017062 Mineral base oil [V• 40 = 225 mm²/s]Barium complex soap thickener•Service temperature range: -20 °C to +130 °C•
400 g cartridges1 kg can25 kg bucket
Very good pressure absorption.•Good corrosion protection. •High resistance to water.•
Special grease for slow-running rolling and plain bearings operating under high loads
CENTOPLEX GLP 402 020189 Mineral base oil•Lithium soap thickener•Service temperature range: -20 °C to +130 °C•NLGI 2•
25 kg bucket180 kg drum
Very good price/performance ratio.•Good bearing protection due to very good adhesion and wear •protection.Approved by OEMs.•
High-temperature hybrid grease for plain and rolling bearings and for slideways
Klübersynth BH 72-422 094072 PFPE, ester base oil •Polyurea thickener•Service temperature range: -20 °C to +220 °C•NLGI 2 •
500 g cartridge600 g can30 kg bucket
High thermal stability up to 220 °C.•Patented high-end hybrid lubrication technology made by Klüber.•Approved by film stretching OEMs.•
High-end grease for very high temperatures and long-term lubrication
BARRIERTA L55/2 090013 PFPE base oil•PTFE thickener•Service temperature range: -40 °C to +260 °C•NLGI 2 •
1 kg can800 g cartridge10 kg bucket
Very high machine availability.•Very good compatibility with plastics.•Proven in numerous applications over many years.•
28
Application Product Article Number Description Pack sizes Benefit
Grease for very high temperatures and long-term lubrication
BARRIERTA L55/1 090042 PFPE base oil•PTFE thickener•Service temperature range: -40 °C to +260 °C•NLGI 1 •
1 kg can800 g cartridge10 kg bucket
Very high machine availability.•Very good compatibility with plastics.•Proven in numerous applications over many years.•
TDO – clip
Application Product Article Number Description Pack sizes Benefit
Chain flushing oil with high thermal resistance HOTEMP SUPER C 2-50 002109 Low-viscosity ester base oil•Upper service temperature: 250 °C•
20 l canister200 l drum
Very good flushing effect.•Regenerates and dissolves pasty oil residues.•Good wear protection after flushing.•Solvent-free.•
Chain flushing oil with particularly good spreading behaviour HOTEMP SUPER M 121 S 002122 Low-viscosity ester base oil•Upper service temperature: 250 °C•
200 l drum Very good spreading and penetrating properties.•Regenerates and dissolves pasty oil residues.•
TDO – flushing oil
TDO – sliding chain
Application Product Article Number Description Pack sizes Benefit
New high-temperature chain oil for high speeds (especially developed for Brückner chain systems)
Klübersynth CH 2-280 067071 Ester base oil•Upper service temperature: 280 °C•Flash point: > 250 °C•
5 l canister20 l canister200 l drum
New chain oil technology.•Very low residue formation and low evaporation loss.•Low oil consumption due to very high oxidation stability.•Fewer film breaks due to good compatibility with film materials.•Excellent performance under high chain speeds > 350m/min and •high temperatures > 190 °C.
Tried and tested high-temperature chain oil PRIMIUM SUPER M 93 067111 Ester base oil •Upper service temperature: 250 °C•Flash point: ≥ 270 °C•
5 l canister20 l canister200 l drum
No. 1 chain oil for film stretching lines.•Backed by numerous references worldwide.•Fewer film breaks due to good compatibility with film materials.•Excellent performance at high chain speeds up to 350 m/min and •high temperatures up to 190 °C.Approved by OEMs.•
High-temperature chain oil PRIMIUM SUPER 067108 Ester base oil •Upper service temperature: 250 °C•Flash point: ≥ 270 °C•
5 l canister20 l canister200 l drum
Backed by numerous references worldwide.•Low evaporation loss and reduced formation of condensate •residues.Exclusive recommendation for use in DMT and Dornier film •stretching machines.
High-temperature chain oil
PRIMIUM FLUID SPECIAL 067085 Ester base oil •Upper service temperature: 250 °C•
5 l canister20 l canister200 l drum
Backed by numerous references worldwide, especially on older •chain systems.
29
Application Product Article Number Description Pack sizes Benefit
Grease for very high temperatures and long-term lubrication
BARRIERTA L55/1 090042 PFPE base oil•PTFE thickener•Service temperature range: -40 °C to +260 °C•NLGI 1 •
1 kg can800 g cartridge10 kg bucket
Very high machine availability.•Very good compatibility with plastics.•Proven in numerous applications over many years.•
Application Product Article Number Description Pack sizes Benefit
Chain flushing oil with high thermal resistance HOTEMP SUPER C 2-50 002109 Low-viscosity ester base oil•Upper service temperature: 250 °C•
20 l canister200 l drum
Very good flushing effect.•Regenerates and dissolves pasty oil residues.•Good wear protection after flushing.•Solvent-free.•
Chain flushing oil with particularly good spreading behaviour HOTEMP SUPER M 121 S 002122 Low-viscosity ester base oil•Upper service temperature: 250 °C•
200 l drum Very good spreading and penetrating properties.•Regenerates and dissolves pasty oil residues.•
Application Product Article Number Description Pack sizes Benefit
New high-temperature chain oil for high speeds (especially developed for Brückner chain systems)
Klübersynth CH 2-280 067071 Ester base oil•Upper service temperature: 280 °C•Flash point: > 250 °C•
5 l canister20 l canister200 l drum
New chain oil technology.•Very low residue formation and low evaporation loss.•Low oil consumption due to very high oxidation stability.•Fewer film breaks due to good compatibility with film materials.•Excellent performance under high chain speeds > 350m/min and •high temperatures > 190 °C.
Tried and tested high-temperature chain oil PRIMIUM SUPER M 93 067111 Ester base oil •Upper service temperature: 250 °C•Flash point: ≥ 270 °C•
5 l canister20 l canister200 l drum
No. 1 chain oil for film stretching lines.•Backed by numerous references worldwide.•Fewer film breaks due to good compatibility with film materials.•Excellent performance at high chain speeds up to 350 m/min and •high temperatures up to 190 °C.Approved by OEMs.•
High-temperature chain oil PRIMIUM SUPER 067108 Ester base oil •Upper service temperature: 250 °C•Flash point: ≥ 270 °C•
5 l canister20 l canister200 l drum
Backed by numerous references worldwide.•Low evaporation loss and reduced formation of condensate •residues.Exclusive recommendation for use in DMT and Dornier film •stretching machines.
High-temperature chain oil
PRIMIUM FLUID SPECIAL 067085 Ester base oil •Upper service temperature: 250 °C•
5 l canister20 l canister200 l drum
Backed by numerous references worldwide, especially on older •chain systems.
30
Application Product Article Number Description Pack sizes Benefit
Concentrated chain cleaning conditioner fluid Klüber Summit Varnasolv 050017 C• oncentrated synthetic conditioner 3.8 l canister19 l canister
Dissolves varnish and carbon residues.•Prevents clogging of lubrication lines.•Reduces maintenance, friction and energy consumption by •dissolving residues.
TDO – cleaning conditioner
Application Product Article Number Description Pack sizes Benefit
Grease for very high temperatures and long-term lubrication
BARRIERTA L55 greases L55/0 L55/1L55/2 L55/3
090035 090042 090013 090014
PFPE base oil•PTFE thickener•Service temperature range: up to +260 °C•NLGI 0/1/2/3•
1 kg can800 g cartridge10 kg bucket
Very high machine availability.•Very good compatibility with plastics.•Proven in numerous applications over many years.•
Long-life grease for bearings operating at very high temperatures
Klüberalfa BH 83-292 090108 PFPE base oil •PTFE thickener•Service temperature range: -60 °C to +270 °C •
1 kg can Higher machine availability and less need for maintenance at •very high operating temperatures up to 270 °C.Very good compatibility with plastic and elastomer materials.•
New high-temperature chain oil for high speeds Klübersynth CH 2-280 067071 Ester base oil•Upper service temperature: 280 °C•Flash point: > 250 °C•
5 l canister20 l canister200 l drum
New chain oil technology.•Very low residue formation and low evaporation loss.•Low oil consumption due to very high oxidation stability.•Fewer film breaks due to good compatibility with film materials.•Excellent performance at high chain speeds > 350 m/min and •high temperatures > 190 °C.
Tried and tested high-temperature chain oil for roller guide rails
PRIMIUM SUPER M 93 067111 Ester base oil•Upper service temperature: 250 °C•Flash point: ≥ 270 °C•
5 l canister20 l canister200 l drum
No. 1 chain oil for film stretching lines.•Backed by numerous references worldwide.•Fewer film breaks due to good compatibility with film •materials.Excellent performance at high chain speeds up to 350 m/min and •high temperatures up to 190 °C.Approved by OEMs.•
High-temperature lubricating fluid for roller guide rails Klüberalfa LISIM Fluid 090100 PFPE base oil•Upper service temperature: 260 °C•
0.5 l canister10 l canister
Especially developed for and approved by Brückner for the new •LISIM film stretching technology.
TDO – roller chain
31
Application Product Article Number Description Pack sizes Benefit
Concentrated chain cleaning conditioner fluid Klüber Summit Varnasolv 050017 C• oncentrated synthetic conditioner 3.8 l canister19 l canister
Dissolves varnish and carbon residues.•Prevents clogging of lubrication lines.•Reduces maintenance, friction and energy consumption by •dissolving residues.
Application Product Article Number Description Pack sizes Benefit
Grease for very high temperatures and long-term lubrication
BARRIERTA L55 greases L55/0 L55/1L55/2 L55/3
090035 090042 090013 090014
PFPE base oil•PTFE thickener•Service temperature range: up to +260 °C•NLGI 0/1/2/3•
1 kg can800 g cartridge10 kg bucket
Very high machine availability.•Very good compatibility with plastics.•Proven in numerous applications over many years.•
Long-life grease for bearings operating at very high temperatures
Klüberalfa BH 83-292 090108 PFPE base oil •PTFE thickener•Service temperature range: -60 °C to +270 °C •
1 kg can Higher machine availability and less need for maintenance at •very high operating temperatures up to 270 °C.Very good compatibility with plastic and elastomer materials.•
New high-temperature chain oil for high speeds Klübersynth CH 2-280 067071 Ester base oil•Upper service temperature: 280 °C•Flash point: > 250 °C•
5 l canister20 l canister200 l drum
New chain oil technology.•Very low residue formation and low evaporation loss.•Low oil consumption due to very high oxidation stability.•Fewer film breaks due to good compatibility with film materials.•Excellent performance at high chain speeds > 350 m/min and •high temperatures > 190 °C.
Tried and tested high-temperature chain oil for roller guide rails
PRIMIUM SUPER M 93 067111 Ester base oil•Upper service temperature: 250 °C•Flash point: ≥ 270 °C•
5 l canister20 l canister200 l drum
No. 1 chain oil for film stretching lines.•Backed by numerous references worldwide.•Fewer film breaks due to good compatibility with film •materials.Excellent performance at high chain speeds up to 350 m/min and •high temperatures up to 190 °C.Approved by OEMs.•
High-temperature lubricating fluid for roller guide rails Klüberalfa LISIM Fluid 090100 PFPE base oil•Upper service temperature: 260 °C•
0.5 l canister10 l canister
Especially developed for and approved by Brückner for the new •LISIM film stretching technology.
32
TDO – drive for chain track system – gear box
Application Product Article Number Description Pack sizes Benefit
High-temperature gear oil Klübersynth GH 6ISO VG 150ISO VG 220ISO VG 320ISO VG 460ISO VG 680ISO VG 1000
012160 012161 012162 012163 012164 012165
Polyglycol base oil•Conforms to DIN 51 517 CLP PG•Pitting resistance > 10, at 60 °C and 90 °C•Passed FZG test at 140 °C•Passed FE 8 test•High load carrying capacity: FZG load stage ≥ 14•Passed API GL5, ISO VG 320 or higher •
200 l drum20 l canister5 l canister
Very long oil lifetime.•Very low residue formation supporting a long lifetime especially •of the bearings.Less leakage due to good compatibility with shaft seals.•Many approvals, e.g. by Friedr. Flender, SEW, ZAE, Lenze, •Getriebebau Nord, Bonfiglioli.Especially for worm gears.•Reduces friction and wear due to a high viscosity index.•Saves energy due to the special behaviour of the Klüber •polyglycol.High load resistance.•
Long-life gear oil Klübersynth GEM 4 N ISO VG 150 ISO VG 220 ISO VG 320ISO VG 460 ISO VG 680
012233 012234 012235 012236 012237
PAO base oil•Conforms to DIN 51 517 CLP HC•Pitting resistance > 10, at 60 °C and 90 °C•Passed FZG test at 140 °C•High load carrying capacity: FZG load stage ≥ 14 •Passed FE 8 test•
200 l drum20 l canister
Easy changeover from mineral to synthetic oils with the •advantage of a longer oil life.Good foam stability.•Recommended by Brückner.•
Application Product Article Number Description Pack sizes Benefit
Greases for extreme requirements Klüberplex BE 31-102222502
017135 017132 017126
Mineral base oil •Special calcium soap thickener •Service temperature range: up to +140 °C •(Klüberplex BE 31-102: up to +120 °C)High load carrying capacity•
1 kg can25 kg bucket
Very good wear protection.•Very good media resistance.•Strong adhesion.•High resistance to oxidation and ageing.•
Long-life grease for rolling and plain bearings and for cardan shafts
STABURAGS NBU 12/300 KP 017062 Mineral base oil [V• 40 = 225 mm²/s]Barium complex soap thickener•Service temperature range: -20 °C to +130 °C•
400 g cartridges1 kg can25 kg bucket
Very good pressure absorption.•Good corrosion protection.•High resistance to water.•Well proven in this application. •
Semi-synthetic grease for bearings and linear guides Klüberplex BEM 34-132 017141 Synthetic hydrocarbon base oil plus mineral base •oil Special calcium soap thickener•Service temperature range: -35 °C to +140 °C•NLGI 2 •Passed FAG FE 9 test at 140 °C•
1 kg can25 kg bucket180 kg drum
Multi-purpose grease for demanding conditions.•Long service intervals. •Very good resistance to micro-movements.•
TDO – drive for chain track system – cardan joint
33
Application Product Article Number Description Pack sizes Benefit
High-temperature gear oil Klübersynth GH 6ISO VG 150ISO VG 220ISO VG 320ISO VG 460ISO VG 680ISO VG 1000
012160 012161 012162 012163 012164 012165
Polyglycol base oil•Conforms to DIN 51 517 CLP PG•Pitting resistance > 10, at 60 °C and 90 °C•Passed FZG test at 140 °C•Passed FE 8 test•High load carrying capacity: FZG load stage ≥ 14•Passed API GL5, ISO VG 320 or higher •
200 l drum20 l canister5 l canister
Very long oil lifetime.•Very low residue formation supporting a long lifetime especially •of the bearings.Less leakage due to good compatibility with shaft seals.•Many approvals, e.g. by Friedr. Flender, SEW, ZAE, Lenze, •Getriebebau Nord, Bonfiglioli.Especially for worm gears.•Reduces friction and wear due to a high viscosity index.•Saves energy due to the special behaviour of the Klüber •polyglycol.High load resistance.•
Long-life gear oil Klübersynth GEM 4 N ISO VG 150 ISO VG 220 ISO VG 320ISO VG 460 ISO VG 680
012233 012234 012235 012236 012237
PAO base oil•Conforms to DIN 51 517 CLP HC•Pitting resistance > 10, at 60 °C and 90 °C•Passed FZG test at 140 °C•High load carrying capacity: FZG load stage ≥ 14 •Passed FE 8 test•
200 l drum20 l canister
Easy changeover from mineral to synthetic oils with the •advantage of a longer oil life.Good foam stability.•Recommended by Brückner.•
Application Product Article Number Description Pack sizes Benefit
Greases for extreme requirements Klüberplex BE 31-102222502
017135 017132 017126
Mineral base oil •Special calcium soap thickener •Service temperature range: up to +140 °C •(Klüberplex BE 31-102: up to +120 °C)High load carrying capacity•
1 kg can25 kg bucket
Very good wear protection.•Very good media resistance.•Strong adhesion.•High resistance to oxidation and ageing.•
Long-life grease for rolling and plain bearings and for cardan shafts
STABURAGS NBU 12/300 KP 017062 Mineral base oil [V• 40 = 225 mm²/s]Barium complex soap thickener•Service temperature range: -20 °C to +130 °C•
400 g cartridges1 kg can25 kg bucket
Very good pressure absorption.•Good corrosion protection.•High resistance to water.•Well proven in this application. •
Semi-synthetic grease for bearings and linear guides Klüberplex BEM 34-132 017141 Synthetic hydrocarbon base oil plus mineral base •oil Special calcium soap thickener•Service temperature range: -35 °C to +140 °C•NLGI 2 •Passed FAG FE 9 test at 140 °C•
1 kg can25 kg bucket180 kg drum
Multi-purpose grease for demanding conditions.•Long service intervals. •Very good resistance to micro-movements.•
34
TDO – fan bearing
Application Product Article Number Description Pack sizes Benefit
Long-term grease for fan and motor bearings Klüberquiet BQH 72-102 094023 Synthetic base oil [V• 40 = 100 mm²/s]Polyurea thickener•Service temperature range: -40 °C to +180 °C•Passed FAG FE 9 test at 180 °C•NLGI 2•
25 kg bucket1 kg can400 g cartridge
Cost savings due to long service intervals.•Wide service temperature range allows large variety of •applications.Smooth running and low noise.•Backed by numerous references.•For long-term and lifetime lubrication at high temperatures.•For rolling bearings capped or sealed on both sides.•
Bearing grease for fans and motors
PETAMO GY 193 094046 Ester base oil•Polyurea thickener•NLGI 2•Service temperature range: -20 °C to +180 °C•
400 g cartridge 1 kg can25 kg bucket180 kg drum
Long-term lubrication intervals due to special base oil and •additive package.Reliability proven in many applications.•Below 150 °C lifetime lubrication possible.•
Special grease for bearings in fans and motors STABURAGS NBU 8 EP 017105 Mineral base oil•Barium complex soap thickener•Service temperature range: -20 °C to +140 °C•NLGI 2 •
400 g cartridges1 kg can25 kg bucket
Especially developed for bearings operating at medium to high •speeds and with high loads.Well proven over the last 20 years.•
TDO – pneumatic lubrication
Application Product Article Number Description Pack sizes Benefit
Special oil for pneumatic systems AIRPRESS 15 035005 Mineral base oil and ester base oil•Service temperature range: -30 °C to +100 °C•
20 l canister200 l steel drum
Long-term lubrication of the pneumatic system. •Good corrosion and foam protection.•Good air separation capacity.•Prevents icing. •
TDO – width adjustment spindle
Application Product Article Number Description Pack sizes Benefit
Metal-free high-temperature paste WOLFRAKOTE TOP PASTE 089003 Synthetic hydrocarbon base oil•Inorganic solid lubricants•Service temperature range: -25 °C to +1000 °C•Dry lubrication above 200 °C•NLGI 1•
750 g can600 g cartridge30 kg bucket
Good lubricating effect with thin layers and low lubricant •consumption.No gluey residues, hence prevention of sticking in hot areas.•Reliability backed by field experience and approvals.•Facilitates assembly and disassembly after long-term use in hot •areas.
Bonded coating for dry lubrication MOLYBKOMBIN UMF T4 Spray 081005 Solid lubricant•Organic binder •Acetone solvent and dimethylether propellant •Service temperature range: -40 °C to +450 °C•
400 ml spray Well proven as a dry lubricant for the width adjustment spindle in •textile stenter frames.Long-term lubrication due to good adhesion to metals and high •pressure resistance.Easy spray application.•Eliminates stick-slip in guideways.•
High-temperature hybrid grease for plain and rolling bearings and for slideways
Klübersynth BH 72-422 094072 PFPE, ester base oil •Polyurea thickener•Service temperature range: -20 °C to +220 °C•NLGI 2 •
500 g cartridge600 g can30 kg bucket
High thermal stability up to 220 °C.•Patented high-temperature hybrid lubrication technology made •by Klüber.Approved by film stretching OEMs.•
Grease for very high temperatures and long-term lubrication
BARRIERTA L55 greases L55/0 L55/1L55/2 L55/3
090035090042090013090014
PFPE base oil•PTFE thickener•Service temperature range: up to +260 °C•NLGI 0/1/2/3•
1 kg can800 g cartridge10 kg bucket
Much higher machine availability. •Very good compatibility with plastics.•Proven in numerous applications over many years.•
35
Application Product Article Number Description Pack sizes Benefit
Long-term grease for fan and motor bearings Klüberquiet BQH 72-102 094023 Synthetic base oil [V• 40 = 100 mm²/s]Polyurea thickener•Service temperature range: -40 °C to +180 °C•Passed FAG FE 9 test at 180 °C•NLGI 2•
25 kg bucket1 kg can400 g cartridge
Cost savings due to long service intervals.•Wide service temperature range allows large variety of •applications.Smooth running and low noise.•Backed by numerous references.•For long-term and lifetime lubrication at high temperatures.•For rolling bearings capped or sealed on both sides.•
Bearing grease for fans and motors
PETAMO GY 193 094046 Ester base oil•Polyurea thickener•NLGI 2•Service temperature range: -20 °C to +180 °C•
400 g cartridge 1 kg can25 kg bucket180 kg drum
Long-term lubrication intervals due to special base oil and •additive package.Reliability proven in many applications.•Below 150 °C lifetime lubrication possible.•
Special grease for bearings in fans and motors STABURAGS NBU 8 EP 017105 Mineral base oil•Barium complex soap thickener•Service temperature range: -20 °C to +140 °C•NLGI 2 •
400 g cartridges1 kg can25 kg bucket
Especially developed for bearings operating at medium to high •speeds and with high loads.Well proven over the last 20 years.•
Application Product Article Number Description Pack sizes Benefit
Special oil for pneumatic systems AIRPRESS 15 035005 Mineral base oil and ester base oil•Service temperature range: -30 °C to +100 °C•
20 l canister200 l steel drum
Long-term lubrication of the pneumatic system. •Good corrosion and foam protection.•Good air separation capacity.•Prevents icing. •
Application Product Article Number Description Pack sizes Benefit
Metal-free high-temperature paste WOLFRAKOTE TOP PASTE 089003 Synthetic hydrocarbon base oil•Inorganic solid lubricants•Service temperature range: -25 °C to +1000 °C•Dry lubrication above 200 °C•NLGI 1•
750 g can600 g cartridge30 kg bucket
Good lubricating effect with thin layers and low lubricant •consumption.No gluey residues, hence prevention of sticking in hot areas.•Reliability backed by field experience and approvals.•Facilitates assembly and disassembly after long-term use in hot •areas.
Bonded coating for dry lubrication MOLYBKOMBIN UMF T4 Spray 081005 Solid lubricant•Organic binder •Acetone solvent and dimethylether propellant •Service temperature range: -40 °C to +450 °C•
400 ml spray Well proven as a dry lubricant for the width adjustment spindle in •textile stenter frames.Long-term lubrication due to good adhesion to metals and high •pressure resistance.Easy spray application.•Eliminates stick-slip in guideways.•
High-temperature hybrid grease for plain and rolling bearings and for slideways
Klübersynth BH 72-422 094072 PFPE, ester base oil •Polyurea thickener•Service temperature range: -20 °C to +220 °C•NLGI 2 •
500 g cartridge600 g can30 kg bucket
High thermal stability up to 220 °C.•Patented high-temperature hybrid lubrication technology made •by Klüber.Approved by film stretching OEMs.•
Grease for very high temperatures and long-term lubrication
BARRIERTA L55 greases L55/0 L55/1L55/2 L55/3
090035090042090013090014
PFPE base oil•PTFE thickener•Service temperature range: up to +260 °C•NLGI 0/1/2/3•
1 kg can800 g cartridge10 kg bucket
Much higher machine availability. •Very good compatibility with plastics.•Proven in numerous applications over many years.•
36
Tension roll, winder, treatment
Open gearGRAFLOSCON C SG 0 Ultra •
Spindle & roll adjustmentKlüberlub BE 41-542•Klüberplex BE 31-102, -222, -502 •
Chuck & clamping fingersALTEMP Q NB 50 •
GuidewaysSTABURAGS NBU 12/300 KP •
Vacuum pump fluidsKlüber Tyreno Fluids•
Gear boxKlübersynth GH 6 oils •Klübersynth GEM 4 N oils •Klüberoil GEM 1 N oils •
BearingKlüberplex BE 31-102, -222, -502•Klüberplex BEM 34-132•CENTOPLEX GLP 402•Klüberlectric B 44-152 •
Fast applicator roller bearingISOFLEX SUPER LDS 18 •
Cardan jointKlüberplex BE 31-102, -222, -502•STABURAGS NBU 12/300 KP•Klüberplex BEM 34-132•STABURAGS NBU 8 EP •
38
Application Product Article Number Description Pack sizes Benefit
High-performance mineral gear oil Klüberoil GEM 1 N ISO VG 150 ISO VG 220 ISO VG 320 ISO VG 460 ISO VG 680
030057 030058 030062 030063 030064
Mineral base oil•Conforms to DIN 51517 CLP•Pitting resistance > 10, at 60 °C and 90 °C•Passed FE 8 test at 120 °C, 500 h, 80 kN•High load carrying capacity: FZG load stage ≥ 13•
200 l drum20 l canister
Particularly suitable for bearings operating under high loads.•Less leakage due to good compatibility with shaft seals.•Recommended by Brückner.•
Long-life gear oil Klübersynth GEM 4 N ISO VG 150 ISO VG 220 ISO VG 320ISO VG 460 ISO VG 680
012233 012234 012235 012236 012237
PAO base oil•Conforms to DIN 51 517 CLP HC•Pitting resistance > 10, at 60 °C and 90 °C•Passed FZG test at 140 °C•High load carrying capacity: FZG load stage ≥ 14 •Passed FE 8 test•
200 l drum20 l canister
Easy changeover from mineral to synthetic oils with the •advantage of a longer oil lifetime.Low foaming tendency.•
High-temperature gear oil Klübersynth GH 6 ISO VG 150ISO VG 220ISO VG 320ISO VG 460ISO VG 680ISO VG 1000
012160 012161 012162 012163 012164 012165
Polyglycol base oil•Conforms to DIN 51 517 CLP PG•Pitting resistance > 10, at 60 °C and 90 °C•Passed FZG test at 140 °C•Passed FE 8 test•High load carrying capacity: FZG load stage ≥ 14•Passed API GL5, ISO VG 320 or higher •
200 l drum20 l canister5 l canister
Very long oil life.•Very low residue formation extending bearing life. •Less leakage due to good compatibility with shaft seals.•Many approvals, e.g. by Friedr. Flender, SEW, ZAE, Lenze, •Getriebebau Nord, Bonfigioli.Recommended by Brückner and DMT.•Especially for worm gears and spur gears.•Reduces friction and wear due to a high viscosity index.•Saves energy due to the special behaviour of the Klüber •polyclycol.High load resistance.•
Application Product Article Number Description Pack sizes Benefit
Greases for extreme requirements Klüberplex BE 31-102222502
017135 017132 017126
Mineral base oil •Special calcium soap thickener •Service temperature range: up to +140 °C •(Klüberplex BE 31-102: up to +120 °C)High load carrying capacity•
1 kg can25 kg bucket
Very good wear protection.•Very good media resistance.•Strong adhesion.•High resistance to oxidation and ageing.•
Semi-synthetic grease for bearings and linear motion guides Klüberplex BEM 34-132 017141 Synthetic hydrocarbon base oil plus mineral base •oil Special calcium soap thickener•Service temperature range: -35 °C to +140 °C•NLGI 2 •Passed FAG FE 9 test at 140 °C•
1 kg can25 kg bucket180 kg drum
Multi-purpose grease for demanding conditions.•Long service intervals. •Very good resistance to micro-movements.•
Special grease for slow-running rolling and plain bearings operating under high loads
CENTOPLEX GLP 402 020189 Mineral base oil•Lithium soap thickener•Service temperature range: -20 °C to +130 °C•NLGI 2 •
25 kg bucket180 kg drum
Very good price/performance ratio.•Good bearing protection due to very good adhesion and wear •protection.Approved by OEMs.•
Electrically conductive synthetic rolling bearing grease Klüberlectric BE 44-152 091053 Synthetic hydrocarbon base oil •Special lithium soap thickener•Solid lubricants•Service temperature range: -40 °C to +150 °C •NLGI 2•
1 kg can25 kg bucket
Static electricity is conducted steadily through the grease, •avoiding arcing damage.Good lifetime results attained in FAG FE 9 test.•
Tension roll, winder, treatment – gear box
Pull roll, winder, treatment – bearing
39
Application Product Article Number Description Pack sizes Benefit
High-performance mineral gear oil Klüberoil GEM 1 N ISO VG 150 ISO VG 220 ISO VG 320 ISO VG 460 ISO VG 680
030057 030058 030062 030063 030064
Mineral base oil•Conforms to DIN 51517 CLP•Pitting resistance > 10, at 60 °C and 90 °C•Passed FE 8 test at 120 °C, 500 h, 80 kN•High load carrying capacity: FZG load stage ≥ 13•
200 l drum20 l canister
Particularly suitable for bearings operating under high loads.•Less leakage due to good compatibility with shaft seals.•Recommended by Brückner.•
Long-life gear oil Klübersynth GEM 4 N ISO VG 150 ISO VG 220 ISO VG 320ISO VG 460 ISO VG 680
012233 012234 012235 012236 012237
PAO base oil•Conforms to DIN 51 517 CLP HC•Pitting resistance > 10, at 60 °C and 90 °C•Passed FZG test at 140 °C•High load carrying capacity: FZG load stage ≥ 14 •Passed FE 8 test•
200 l drum20 l canister
Easy changeover from mineral to synthetic oils with the •advantage of a longer oil lifetime.Low foaming tendency.•
High-temperature gear oil Klübersynth GH 6 ISO VG 150ISO VG 220ISO VG 320ISO VG 460ISO VG 680ISO VG 1000
012160 012161 012162 012163 012164 012165
Polyglycol base oil•Conforms to DIN 51 517 CLP PG•Pitting resistance > 10, at 60 °C and 90 °C•Passed FZG test at 140 °C•Passed FE 8 test•High load carrying capacity: FZG load stage ≥ 14•Passed API GL5, ISO VG 320 or higher •
200 l drum20 l canister5 l canister
Very long oil life.•Very low residue formation extending bearing life. •Less leakage due to good compatibility with shaft seals.•Many approvals, e.g. by Friedr. Flender, SEW, ZAE, Lenze, •Getriebebau Nord, Bonfigioli.Recommended by Brückner and DMT.•Especially for worm gears and spur gears.•Reduces friction and wear due to a high viscosity index.•Saves energy due to the special behaviour of the Klüber •polyclycol.High load resistance.•
Application Product Article Number Description Pack sizes Benefit
Greases for extreme requirements Klüberplex BE 31-102222502
017135 017132 017126
Mineral base oil •Special calcium soap thickener •Service temperature range: up to +140 °C •(Klüberplex BE 31-102: up to +120 °C)High load carrying capacity•
1 kg can25 kg bucket
Very good wear protection.•Very good media resistance.•Strong adhesion.•High resistance to oxidation and ageing.•
Semi-synthetic grease for bearings and linear motion guides Klüberplex BEM 34-132 017141 Synthetic hydrocarbon base oil plus mineral base •oil Special calcium soap thickener•Service temperature range: -35 °C to +140 °C•NLGI 2 •Passed FAG FE 9 test at 140 °C•
1 kg can25 kg bucket180 kg drum
Multi-purpose grease for demanding conditions.•Long service intervals. •Very good resistance to micro-movements.•
Special grease for slow-running rolling and plain bearings operating under high loads
CENTOPLEX GLP 402 020189 Mineral base oil•Lithium soap thickener•Service temperature range: -20 °C to +130 °C•NLGI 2 •
25 kg bucket180 kg drum
Very good price/performance ratio.•Good bearing protection due to very good adhesion and wear •protection.Approved by OEMs.•
Electrically conductive synthetic rolling bearing grease Klüberlectric BE 44-152 091053 Synthetic hydrocarbon base oil •Special lithium soap thickener•Solid lubricants•Service temperature range: -40 °C to +150 °C •NLGI 2•
1 kg can25 kg bucket
Static electricity is conducted steadily through the grease, •avoiding arcing damage.Good lifetime results attained in FAG FE 9 test.•
40
Application Product Article Number Description Pack sizes Benefit
High-speed bearing grease ISOFLEX SUPER LDS 18 004024 Ester base oil •Mineral base oil •Service temperature range: -50 °C to +120 °C•Dynamically light grease•Speed factor 1,000,000 n*dm•
45 g PE tubes400 g cartridges1 kg can25 kg bucket
Low friction in high-speed bearing applications enabling a long •lifetime.Low noise.•
Application Product Article Number Description Pack sizes Benefit
Greases for extreme requirements Klüberplex BE 31-102222502
017135 017132 017126
Mineral base oil •Special calcium soap thickener •Service temperature range: up to +140 °C •(Klüberplex BE 31-102: up to 120 °C)High load carrying capacity•
1 kg can25 kg bucket
Very good wear protection.•Very good media resistance.•Strong adhesion.•High resistance to oxidation and ageing.•
Long-life grease for rolling and plain bearings and for cardan shafts
STABURAGS NBU 12/300 KP 017062 Mineral base oil •Barium complex soap thickener•Service temperature range: -20 °C to +130 °C•
400 g cartridges1 kg can25 kg bucket
Very good pressure absorption.•Good corrosion protection. •High resistance to water.•Well proven in this application. •
Semi-synthetic grease for bearings and linear motion guides Klüberplex BEM 34-132 017141 Synthetic hydrocarbon base oil plus mineral base •oil Special calcium soap thickener•Service temperature range: -35 °C to +140 °C•NLGI 2 •Passed FAG FE 9 test at 140 °C•
1 kg can25 kg bucket180 kg drum
Multi-purpose grease for demanding conditions.•Long service intervals. •Very good resistance against micro movements.•
Special grease for bearings STABURAGS NBU 8 EP 017105 Mineral base oil [V• 40 = 95 mm²/s]Barium complex soap thickener•Service temperature range: -20 °C to +140 °C•NLGI 2•
400 g cartridges1 kg can25 kg bucket
Especially developed for bearings operating at medium to high •speeds and with high loads.Well proven over the last 20 years.•
Application Product Article Number Description Pack sizes Benefit
Special lubricant for open gears GRAFLOSCON C SG 0 Ultra 039067 Mineral base oil •Aluminium soap thickener•Solid lubricants•Service temperature range: -30 °C to +200 °C •(depending on relubrication)Passed FZG test, load stage > 12•NLGI 0•
25 kg bucket180 kg drum
Contains adhesion improvers preventing the product from •contaminating the machine environment.Low friction and good corrosion protection enabling a long •lifetime.
Tension roll, winder, treatment – high-speed bearings
Tension roll, winder, treatment – cardan joint
Tension roll, winder, treatment – open gear
41
Application Product Article Number Description Pack sizes Benefit
High-speed bearing grease ISOFLEX SUPER LDS 18 004024 Ester base oil •Mineral base oil •Service temperature range: -50 °C to +120 °C•Dynamically light grease•Speed factor 1,000,000 n*dm•
45 g PE tubes400 g cartridges1 kg can25 kg bucket
Low friction in high-speed bearing applications enabling a long •lifetime.Low noise.•
Application Product Article Number Description Pack sizes Benefit
Greases for extreme requirements Klüberplex BE 31-102222502
017135 017132 017126
Mineral base oil •Special calcium soap thickener •Service temperature range: up to +140 °C •(Klüberplex BE 31-102: up to 120 °C)High load carrying capacity•
1 kg can25 kg bucket
Very good wear protection.•Very good media resistance.•Strong adhesion.•High resistance to oxidation and ageing.•
Long-life grease for rolling and plain bearings and for cardan shafts
STABURAGS NBU 12/300 KP 017062 Mineral base oil •Barium complex soap thickener•Service temperature range: -20 °C to +130 °C•
400 g cartridges1 kg can25 kg bucket
Very good pressure absorption.•Good corrosion protection. •High resistance to water.•Well proven in this application. •
Semi-synthetic grease for bearings and linear motion guides Klüberplex BEM 34-132 017141 Synthetic hydrocarbon base oil plus mineral base •oil Special calcium soap thickener•Service temperature range: -35 °C to +140 °C•NLGI 2 •Passed FAG FE 9 test at 140 °C•
1 kg can25 kg bucket180 kg drum
Multi-purpose grease for demanding conditions.•Long service intervals. •Very good resistance against micro movements.•
Special grease for bearings STABURAGS NBU 8 EP 017105 Mineral base oil [V• 40 = 95 mm²/s]Barium complex soap thickener•Service temperature range: -20 °C to +140 °C•NLGI 2•
400 g cartridges1 kg can25 kg bucket
Especially developed for bearings operating at medium to high •speeds and with high loads.Well proven over the last 20 years.•
Application Product Article Number Description Pack sizes Benefit
Special lubricant for open gears GRAFLOSCON C SG 0 Ultra 039067 Mineral base oil •Aluminium soap thickener•Solid lubricants•Service temperature range: -30 °C to +200 °C •(depending on relubrication)Passed FZG test, load stage > 12•NLGI 0•
25 kg bucket180 kg drum
Contains adhesion improvers preventing the product from •contaminating the machine environment.Low friction and good corrosion protection enabling a long •lifetime.
42
Application Product Article Number Description Pack sizes Benefit
Multi-purpose lubricating paste ALTEMP Q NB 50 005011 Mineral base oil•Barium complex soap thickener•Contains also inorganic solid lubricants•Service temperature range: -15 °C to +150 °C•Paste with high static and dynamic load carrying •capacity
30 kg bucket750 g can600 g cartridge400 ml can80 g tube400 ml spray
Excellent wear protection.•Very good media resistance.•Good corrosion protection and strong adhesion.•Good protection against tribocorrosion.•Prevents stick-slip.•
Application Product Article Number Description Pack sizes Benefit
Long-life grease for rolling and plain bearings and for cardan shafts
STABURAGS NBU 12/300 KP 017062 Mineral base oil •Barium complex soap thickener•Service temperature range: -20 °C to +130 °C•
400 g cartridges 1 kg can 25 kg bucket
Very good pressure absorption.•Good corrosion protection.•High resistance to water.•Well proven in this application.•
Application Product Description
Working fluid for vacuum pumps Klüber Tyreno Fluids Matching the variety of vacuum pump systems and film coating technologies, we offer a wide range of Klüber Tyreno Fluid products for such applications. To find out which one is right solution for you, please contact us.
Application Product Article Number Description Pack sizes Benefit
Heavy-duty bearing grease Klüberlub BE 41-542 020269 High viscosity mineral oil (V• 40 = 540 mm²/s)Special lithium soap thickener•Service temperature range: -20 °C to +140 °C•NLGI 2•Passed FAG FE 9 test at 140 °C•
180 kg drum25 kg bucket
Less maintenance especially in heavily loaded bearings.•Fulfills the FAG requirements for heavy-duty greases.•Grease with high load carrying capacity for low and medium •speeds.
Greases for extreme requirements Klüberplex BE 31- 102 222 502
017135 017132 017126
Mineral base oil •Special calcium soap thickener •Service temperature range: up to +140 °C •(Klüberplex BE 31-102: up to 120 °C)High load carrying capacity •
1 kg can25 kg bucket
Very good wear protection.•Very good media resistance.•Strong adhesion.•High resistance to oxidation and ageing.•
Tension roll, winder, treatment – chuck and clamping fingers
Tension roll, winder, treatment – guideways
Tension roll, winder, treatment – vacuum pump fluids
Tension roll, winder, treatment – spindle and roll adjustment
43
Application Product Article Number Description Pack sizes Benefit
Multi-purpose lubricating paste ALTEMP Q NB 50 005011 Mineral base oil•Barium complex soap thickener•Contains also inorganic solid lubricants•Service temperature range: -15 °C to +150 °C•Paste with high static and dynamic load carrying •capacity
30 kg bucket750 g can600 g cartridge400 ml can80 g tube400 ml spray
Excellent wear protection.•Very good media resistance.•Good corrosion protection and strong adhesion.•Good protection against tribocorrosion.•Prevents stick-slip.•
Application Product Article Number Description Pack sizes Benefit
Long-life grease for rolling and plain bearings and for cardan shafts
STABURAGS NBU 12/300 KP 017062 Mineral base oil •Barium complex soap thickener•Service temperature range: -20 °C to +130 °C•
400 g cartridges 1 kg can 25 kg bucket
Very good pressure absorption.•Good corrosion protection.•High resistance to water.•Well proven in this application.•
Application Product Description
Working fluid for vacuum pumps Klüber Tyreno Fluids Matching the variety of vacuum pump systems and film coating technologies, we offer a wide range of Klüber Tyreno Fluid products for such applications. To find out which one is right solution for you, please contact us.
Application Product Article Number Description Pack sizes Benefit
Heavy-duty bearing grease Klüberlub BE 41-542 020269 High viscosity mineral oil (V• 40 = 540 mm²/s)Special lithium soap thickener•Service temperature range: -20 °C to +140 °C•NLGI 2•Passed FAG FE 9 test at 140 °C•
180 kg drum25 kg bucket
Less maintenance especially in heavily loaded bearings.•Fulfills the FAG requirements for heavy-duty greases.•Grease with high load carrying capacity for low and medium •speeds.
Greases for extreme requirements Klüberplex BE 31- 102 222 502
017135 017132 017126
Mineral base oil •Special calcium soap thickener •Service temperature range: up to +140 °C •(Klüberplex BE 31-102: up to 120 °C)High load carrying capacity •
1 kg can25 kg bucket
Very good wear protection.•Very good media resistance.•Strong adhesion.•High resistance to oxidation and ageing.•
44
Compressors & maintenance
Air compressors
Screw compressorsKlüber Summit PS oils•Klüber Summit SH oils•
Reciprocating piston compressorsKlüber Summit DSL oils•
Air compressor oils for the food-processing industryKlüber Summit HySyn FG oils•Klüber Summit Varnasolv•
Maintenance lubricants
Corrosion protectionKlüberfood NH1 K 32 Spray•
PastesALTEMP Q NB 50•Klüberpaste UH1 84-201•WOLFRACOAT C•
Multi-purpose greaseCENTOPLEX 2 •
Biodegradeable rust-removing and cleaning agentKlüberbio Z 2-5 •
Universal fluid sprayKlüber QUIETSCH-EX Spray•
Cleaning agentKlüberalfa XZ 3-1 •
Grease sprayMICROLUBE GL 261 Spray•Klüberplex BE 11-462 Spray •
Release agentUNISILKON M 2000 Spray •
Dry lubricantMOLYBKOMBIN UMF T4 Spray•
46
Application Product Article Number Description Pack sizes Benefit
Semi-synthetic lubricant for rotary screw compressors Klüber Summit PS oils- PS 100: ISO VG 32 - PS 150: ISO VG 46 - PS 200: ISO VG 68 - PS 300: ISO VG 100- PS 400: ISO VG 150
050052 050053 050054 050055050056
Mineral base oil •Synthetic hydrocarbon base oil•
19 l canister208 l drum
Long service intervals due to good resistance to oxidation, low •carbonisation tendency and low residue formation.Good demulsifying properties. •Minimum foaming tendency. •Optimised performance in compressors cleaned with Klüber •Summit Varnasolv.
Fully synthetic lubricant for rotary screw compressors Klüber Summit SH oils- SH 32: ISO VG 32 - SH 46: ISO VG 46 - SH 68: ISO VG 68 - SH 100: ISO VG 100
050004 050005 050006 050007
Synthetic hydrocarbon base oil• 19 l canister208 l drum
Reduction of maintenance costs due to extended oil change •intervals.Long compressor lifetime due to reduction of friction and wear.•Excellent low temperatur behaviour.•Optimised performance in compressors cleaned with Klüber •Summit Varnasolv.
Application Product Article Number Description Pack sizes Benefit
Fully synthetic lubricant for piston compressors Klüber Summit DSL oils- DSL 32: ISO VG 32 - DSL 46: ISO VG 46 - DSL 68: ISO VG 68- DSL 100: ISO VG 100 - DSL 125: kinematic viscosity at 40 °C: approx. 125
050000050064 050001 050002 050003
Synthetic hydrocarbon base oil• 19 l canister208 l drum
Low maintenance and operating costs due to long oil change •intervals.Low residue formation supporting long oil filter and separator •lifetime.Reduction of cleaning costs due to special base oil formulation.•
Application Product Article Number Description Pack sizes Benefit
Fully synthetic lubricant for air compressors in the food-processing industry
Klüber Summit HySyn FG oils- 32: ISO VG 32- 46: ISO VG 46- 68: ISO VG 68 - 100: ISO VG 100
050013 050014 050015 050016
Synthetic hydrocarbon base oil•NSF H1-authorised for use in the food and •pharmaceutical industries.
19 l canister208 l drum
Long service intervals due to very low carbonisation tendency.•Reduction of maintenance costs due to extended oil change •intervals.Good elastomer compatibility.•Multi-purpose oil for hydraulic applications. •Optimised performance in compressors cleaned with Klüber •Summit Varnasolv.
Application Product Article Number Description Pack sizes Benefit
Concentrated compressor cleaning conditioner fluid Klüber Summit Varnasolv 050017 Concentrated synthetic conditioner• 3.8 l canister19 l canister
Dissolves varnish and carbon residues.•Prevents clogging of lubrication lines.•Reduces maintenance, friction and energy consumption by •dissolving the residues.
Air compressors – rotary screw compressors
Air compressors – reciprocating piston compressors
Air compressors – applications in the food-processing industry
Air compressor cleaning conditioner
47
Application Product Article Number Description Pack sizes Benefit
Semi-synthetic lubricant for rotary screw compressors Klüber Summit PS oils- PS 100: ISO VG 32 - PS 150: ISO VG 46 - PS 200: ISO VG 68 - PS 300: ISO VG 100- PS 400: ISO VG 150
050052 050053 050054 050055050056
Mineral base oil •Synthetic hydrocarbon base oil•
19 l canister208 l drum
Long service intervals due to good resistance to oxidation, low •carbonisation tendency and low residue formation.Good demulsifying properties. •Minimum foaming tendency. •Optimised performance in compressors cleaned with Klüber •Summit Varnasolv.
Fully synthetic lubricant for rotary screw compressors Klüber Summit SH oils- SH 32: ISO VG 32 - SH 46: ISO VG 46 - SH 68: ISO VG 68 - SH 100: ISO VG 100
050004 050005 050006 050007
Synthetic hydrocarbon base oil• 19 l canister208 l drum
Reduction of maintenance costs due to extended oil change •intervals.Long compressor lifetime due to reduction of friction and wear.•Excellent low temperatur behaviour.•Optimised performance in compressors cleaned with Klüber •Summit Varnasolv.
Application Product Article Number Description Pack sizes Benefit
Fully synthetic lubricant for piston compressors Klüber Summit DSL oils- DSL 32: ISO VG 32 - DSL 46: ISO VG 46 - DSL 68: ISO VG 68- DSL 100: ISO VG 100 - DSL 125: kinematic viscosity at 40 °C: approx. 125
050000050064 050001 050002 050003
Synthetic hydrocarbon base oil• 19 l canister208 l drum
Low maintenance and operating costs due to long oil change •intervals.Low residue formation supporting long oil filter and separator •lifetime.Reduction of cleaning costs due to special base oil formulation.•
Application Product Article Number Description Pack sizes Benefit
Fully synthetic lubricant for air compressors in the food-processing industry
Klüber Summit HySyn FG oils- 32: ISO VG 32- 46: ISO VG 46- 68: ISO VG 68 - 100: ISO VG 100
050013 050014 050015 050016
Synthetic hydrocarbon base oil•NSF H1-authorised for use in the food and •pharmaceutical industries.
19 l canister208 l drum
Long service intervals due to very low carbonisation tendency.•Reduction of maintenance costs due to extended oil change •intervals.Good elastomer compatibility.•Multi-purpose oil for hydraulic applications. •Optimised performance in compressors cleaned with Klüber •Summit Varnasolv.
Application Product Article Number Description Pack sizes Benefit
Concentrated compressor cleaning conditioner fluid Klüber Summit Varnasolv 050017 Concentrated synthetic conditioner• 3.8 l canister19 l canister
Dissolves varnish and carbon residues.•Prevents clogging of lubrication lines.•Reduces maintenance, friction and energy consumption by •dissolving the residues.
48
Application Product Article Number Description Pack sizes Benefit
Multi-purpose grease CENTOPLEX 2 020062 Mineral oil, lithium soap •Service temperature range: -20 °C to +130 °C •NLGI 2•
400 g cartridge 1 kg can25 kg bucket180 kg drum
Long-term lubrication of general applications.•
Application Product Article Number Description Pack sizes Benefit
Multi-purpose lubricating paste ALTEMP Q NB 50 005011 Mineral base oil•Barium complex soap thickener•Contains also inorganic solid lubricants•Service temperature range: -15 °C to +150 °C•Paste with high static and dynamic load carrying •capacity
30 kg bucket750 g can600 g cartridge400 ml can80 g tube400 ml spray
Excellent wear protection.•Very good media resistance.•Good corrosion protection and strong adhesion.•Good protection against tribo-corrosion.•Prevents stick-slip.•
White lubricating and assembly paste Klüberpaste UH1 84-201 005113 Synthetic base oil•Service temperature range: -45 °C to +120 °C •White and metal-free lubricating and assembly •paste Special combination of organic and inorganic solid •lubricants
25 kg drum600 g can500 g cartridge50 g tube
Registered as NSF H1 for use in the food-processing industry.•White paste for clean appearance in production areas.•Prevents fretting corrosion for longer lifetime of the assembled •parts.Eco-friendly: water pollution category 1.•
High-temperature assembly paste containing copper WOLFRACOAT C 099113 Synthetic hydrocarbon oil•Service temperature range: -30 °C to +1200 °C •(above 200 °C dry lubrication)
30 kg drum1.2 kg can400 g cartridge60 g tube
Efficient lubrication of friction points subject to sliding or rolling •friction.Efficient separation and lubrication of power-locking static •connections.Enables non-destructive disassembly of power-locking •connections.
Maintenance lubricant – multi-purpose grease
Maintenance lubrication – pastes
Application Product Article Number Description Pack sizes Benefit
Anticorrosion spray Klüberfood NH1 K 32 Spray 081276 Especially developed for die protection•Approved according to DIN EN ISO 6270 •– condensation waterApproved according to DIN EN ISO 9227 – salt •water
400 ml spray Registered as NSF H1 for use in the food-processing industry.•Good penetration.•Repels moisture.•Long-term stable transparent protective film.•
Maintenance lubrication – corrosion protection
49
Application Product Article Number Description Pack sizes Benefit
Multi-purpose grease CENTOPLEX 2 020062 Mineral oil, lithium soap •Service temperature range: -20 °C to +130 °C •NLGI 2•
400 g cartridge 1 kg can25 kg bucket180 kg drum
Long-term lubrication of general applications.•
Application Product Article Number Description Pack sizes Benefit
Multi-purpose lubricating paste ALTEMP Q NB 50 005011 Mineral base oil•Barium complex soap thickener•Contains also inorganic solid lubricants•Service temperature range: -15 °C to +150 °C•Paste with high static and dynamic load carrying •capacity
30 kg bucket750 g can600 g cartridge400 ml can80 g tube400 ml spray
Excellent wear protection.•Very good media resistance.•Good corrosion protection and strong adhesion.•Good protection against tribo-corrosion.•Prevents stick-slip.•
White lubricating and assembly paste Klüberpaste UH1 84-201 005113 Synthetic base oil•Service temperature range: -45 °C to +120 °C •White and metal-free lubricating and assembly •paste Special combination of organic and inorganic solid •lubricants
25 kg drum600 g can500 g cartridge50 g tube
Registered as NSF H1 for use in the food-processing industry.•White paste for clean appearance in production areas.•Prevents fretting corrosion for longer lifetime of the assembled •parts.Eco-friendly: water pollution category 1.•
High-temperature assembly paste containing copper WOLFRACOAT C 099113 Synthetic hydrocarbon oil•Service temperature range: -30 °C to +1200 °C •(above 200 °C dry lubrication)
30 kg drum1.2 kg can400 g cartridge60 g tube
Efficient lubrication of friction points subject to sliding or rolling •friction.Efficient separation and lubrication of power-locking static •connections.Enables non-destructive disassembly of power-locking •connections.
Application Product Article Number Description Pack sizes Benefit
Anticorrosion spray Klüberfood NH1 K 32 Spray 081276 Especially developed for die protection•Approved according to DIN EN ISO 6270 •– condensation waterApproved according to DIN EN ISO 9227 – salt •water
400 ml spray Registered as NSF H1 for use in the food-processing industry.•Good penetration.•Repels moisture.•Long-term stable transparent protective film.•
50
Application Product Article Number Description Pack sizes Benefit
Cleaning agent for all PFPE lubricant applications Klüberalfa XZ 3-1 810033 Perfluoroalkyl ether• 1 l canister Dispersant, solvent and detergent for lubricants with perfluori-•nated oils.High evaporation rate.•Does not smell.•Free of CFC solvents.•Non-toxic.•Water Hazard Class 1.•
Maintenance lubricant - PFPE cleaning agent
Application Product Article Number Description Pack sizes Benefit
Rapidly biodegradable rust-removing and cleaning agent Klüberbio Z 2-5 009008spray 081223
Ester base oil • 400 ml spray5 l canister25 l bucket
Eco-friendly due to rapid biodegradability according to CEC •Standards.Easy to apply and ready to use.•Less maintenance required as the product provides cleaning, •lubricating and anticorrosion effect at the same time.
Application Product Article Number Description Pack sizes Benefit
Universal fluid Klüber QUIETSCH EX Spray 081071 Mineral base oil• 400 ml spray50 ml spray
Multi-purpose lubricating oil:Good penetration.•Good rust-removing properties. •Good anti-corrosion properties. •Good protection against freezing. •Good cleaning effect. •Cutting oil.•
Maintenance lubricant – biodegradeable rust-removing and cleaning agent
Maintenance lubricant – universal fluid spray
51
Application Product Article Number Description Pack sizes Benefit
Cleaning agent for all PFPE lubricant applications Klüberalfa XZ 3-1 810033 Perfluoroalkyl ether• 1 l canister Dispersant, solvent and detergent for lubricants with perfluori-•nated oils.High evaporation rate.•Does not smell.•Free of CFC solvents.•Non-toxic.•Water Hazard Class 1.•
Application Product Article Number Description Pack sizes Benefit
Rapidly biodegradable rust-removing and cleaning agent Klüberbio Z 2-5 009008spray 081223
Ester base oil • 400 ml spray5 l canister25 l bucket
Eco-friendly due to rapid biodegradability according to CEC •Standards.Easy to apply and ready to use.•Less maintenance required as the product provides cleaning, •lubricating and anticorrosion effect at the same time.
Application Product Article Number Description Pack sizes Benefit
Universal fluid Klüber QUIETSCH EX Spray 081071 Mineral base oil• 400 ml spray50 ml spray
Multi-purpose lubricating oil:Good penetration.•Good rust-removing properties. •Good anti-corrosion properties. •Good protection against freezing. •Good cleaning effect. •Cutting oil.•
52
Application Product Article Number Description Pack sizes Benefit
Sprayable grease for linear motion guides MICROLUBE GL 261 Spray 120101 Mineral base oil •Special lithium soap thickener•Service temperature range: -30 °C to +140 °C•NLGI 1•
250 ml spray Surface finish maintained for long periods; special protection •against tribocorrosion.Single spray for multiple applications with demanding conditions.•
Sprayable grease for high loads Klüberplex BE 11-462 Spray 081007 Mineral base oil•Aluminium soap thickener•Service temperature range: -15 °C to +150 °C•Passed FAG 9 test at 150 °C•NLGI 2•
400 ml spray Very good pressure absorption capacity.•Very good adhesion and resistance to water. •Less maintenance work. •Free of heavy metals.•
Application Product Article Number Description Pack sizes Benefit
Release agent for the plastics industry UNISILKON M 2000 Spray 081161 Solvent-free silicone-based spray •Colourless (waterwhite)•
250 ml spray Does not affect plastic surfaces. •Protection and impregnating agent for plastic products.•Registered as NSF H1 for use in the food-processing industry.•Efficient protection against sticking and residue formation.•
Application Product Article Number Description Pack sizes Benefit
Bonded coating for dry lubrication MOLYBKOMBIN UMF T4 Spray 081005 Solid lubricant•Organic binder •Acetone solvent and dimethylether propellant •Service temperature range: -40 °C to +450 °C•
400 ml spray Well proven as a dry lubricant for width adjustment spindles in •textile stenter frames.Long-term lubrication due to good adhesion to metals and high •pressure resistance.Easy to use as a spray.•Eliminates stick-slip in guideways.•
Maintenance lubricants – grease sprays
Maintenance lubricant – release agent
Maintenance lubricant – dry lubricant
This product catalogue for film streching processing technology is only a small selection of more than 1,500 Klüber lubrication specialities. In case of any special, individual requirements, please do not hesitate to contact us anywhere around the world.
53
Application Product Article Number Description Pack sizes Benefit
Sprayable grease for linear motion guides MICROLUBE GL 261 Spray 120101 Mineral base oil •Special lithium soap thickener•Service temperature range: -30 °C to +140 °C•NLGI 1•
250 ml spray Surface finish maintained for long periods; special protection •against tribocorrosion.Single spray for multiple applications with demanding conditions.•
Sprayable grease for high loads Klüberplex BE 11-462 Spray 081007 Mineral base oil•Aluminium soap thickener•Service temperature range: -15 °C to +150 °C•Passed FAG 9 test at 150 °C•NLGI 2•
400 ml spray Very good pressure absorption capacity.•Very good adhesion and resistance to water. •Less maintenance work. •Free of heavy metals.•
Application Product Article Number Description Pack sizes Benefit
Release agent for the plastics industry UNISILKON M 2000 Spray 081161 Solvent-free silicone-based spray •Colourless (waterwhite)•
250 ml spray Does not affect plastic surfaces. •Protection and impregnating agent for plastic products.•Registered as NSF H1 for use in the food-processing industry.•Efficient protection against sticking and residue formation.•
Application Product Article Number Description Pack sizes Benefit
Bonded coating for dry lubrication MOLYBKOMBIN UMF T4 Spray 081005 Solid lubricant•Organic binder •Acetone solvent and dimethylether propellant •Service temperature range: -40 °C to +450 °C•
400 ml spray Well proven as a dry lubricant for width adjustment spindles in •textile stenter frames.Long-term lubrication due to good adhesion to metals and high •pressure resistance.Easy to use as a spray.•Eliminates stick-slip in guideways.•
55
Publisher and Copyright:Klüber Lubrication München KG
Reprints, total or in part, are permitted only prior consulta-tion with Klüber Lubrication München KG and if source is indicated and voucher copy is forwarded.
The data in this brochure is based on our general experi-ence and knowledge at the time of printing and is intended to give information of possible applications to a reader with technical experience. It constitutes neither an assurance of product properties nor does it release the user from the obligation of performing preliminary tests with the selected product. We recommend contacting our Technical Consul- ting Staff to discuss your specific application. If required and possible we will be pleased to provide a sample for testing.Klüber products are continually improved. Therefore, Klüber Lubrication reserves the right to change all the technical data in this brochure at any time without notice.
Klüber Lubrication München KGGeisenhausenerstraße 781379 MünchenGermany
Local first-instance court Munich, GermanyCertificate of registration 46624
www.klueber.com
Klüber Lubrication München KGA company of the Freudenberg Group
We are where you are: Klüber Lubrication – the world market leader in speciality lubricants
subsidiaries in over 30 countries•more than 1 700 staff•products available worldwide•
Klüber Lubrication offers expert tribological solutions. Through our worldwide presence, we meet customers needs reliably and on time. We supply tailor-made speciality lubricants to customers from nearly all branches of industry and around the world – oils, greases, bonded coatings, pastes and many more. Over 75 years of experience, industry-specific know-how, and exceptional test facilities all help to optimise our solutions.