*1 Included batteries vary by country or area.*2 As of April 2016. Among 36V cordless rotary hammers made by leading power tool manufacturers (surveyed by Hitachi Koki).*1 Included batteries vary by country or area.*2 As of April 2016. Among 36V cordless rotary hammers made by leading power tool manufacturers (surveyed by Hitachi Koki).
Ah6.0 /2.6Ah Lithium-ion Battery*1
Cordless Rotary HammersDH 36DBL
DH 36DBL
36V 6.0Ah/2.6Ah DH 36DBQL 36V 6.0Ah/2.6Ah
Capacity
Bit Shank
Battery
No Load Speed
Full Load Impact Rate
Overall Length
Weight*1
Standard Accessories
*1 Weight according to EPTA-Procedure 01/2003.*2 The vibration total values were determined according to EN60745.*3 The BSL3660 and BSL3626X are compatible with the DH36DBL and DH36DBQL only. Included batteries vary by country or area.
Concrete
Steel
Wood
Voltage
Power Output
28mm (1-1/8” )
13mm (1/2” )
32mm (1-1/4” )
SDS-plus
36V
216Wh for BSL3660 / 94Wh for BSL3626X
0 - 1,100/min
0 - 4,300/min
390mm (15-23/64”)
4.8kg (10.6lbs.)
Vibration emission value ah, HD = 16.0 m/s2
Uncertainty K = 1.5 m/s2
Uncertainty K = 1.5 m/s2
Vibration emission value ah, HD = 17.0 m/s2
Vibration emission value ah, CHeq = 12.2 m/s2
2 Batteries (BSL3660 or BSL3626X)*3, Charger (UC36YSL), Side Handle,Depth Gauge, Battery Cover,Carrying Case
Drill Chuck Holder2 Batteries (BSL3660 or BSL3626X)*3, Charger (UC36YSL), Side Handle,Depth Gauge, Battery Cover,Carrying Case
Vibration emission value ah, CHeq = 11.6m/s2
423mm (16-21/32”)
5.0kg (11.0lbs.)
Vibration Total Values (triax vector sum)*2
Hammer drilling into concrete
Equivalent chiseling value
DH36DBL DH36DBQLSpecifications
DH 36DBL
DH 36DBQL
Optional Accessories
6.0Ah 2.6Ah
6.0Ah 2.6Ah
Drilling Drill Bit (SDS-plus shank) 13mm Hammer Drill Chuck Set
(for the straight bit shank)
4.0 (5/32”) 5.0 (13/64”) 5.0 (13/64”) 5.5 (7/32”) 6.0 (15/64”) 6.0 (15/64”) 6.4 (1/4”) 6.5 (1/4”) 7.0 (9/32”) 7.5 (19/64”) 8.0 (5/16”) 8.5 (21/64”) 9.0 (23/64”) 9.5 (3/8”)10.0 (25/64”)10.0 (25/64”)10.5 (13/32”)10.5 (13/32”)11.0 (7/16”)12.0 (15/32”)12.0 (15/32”)12.5 (31/64”)12.5 (31/64”)12.7 (1/2”)12.7 (1/2”)13.0 (33/64”)14.0 (35/64”)14.3 (9/16”)14.3 (9/16”)14.5 (37/64”)14.5 (37/64”)15.0 (19/32”)16.0 (5/8”)16.0 (5/8”)16.5 (21/32”)17.0 (43/64”)17.0 (43/64”)17.5 (11/16”)17.5 (11/16”)18.0 (45/64”)19.0 (3/4”)20.0 (25/32”)22.0 (55/64”)24.0 (15/16”)25.0 (63/64”)
110 (4-21/64”)110 (4-21/64”)160 (6-19/64”)110 (4-21/64”)110 (4-21/64”)160 (6-19/64”)160 (6-19/64”)160 (6-19/64”)160 (6-19/64”)160 (6-19/64”)160 (6-19/64”)160 (6-19/64”)160 (6-19/64”)160 (6-19/64”)160 (6-19/64”)260 (10-15/64”)160 (6-19/64”)260 (10-15/64”)160 (6-19/64”)160 (6-19/64”)260 (10-15/64”)160 (6-19/64”)260 (10-15/64”)160 (6-19/64”)260 (10-15/64”)160 (6-19/64”)160 (6-19/64”)160 (6-19/64”)260 (10-15/64”)160 (6-19/64”)260 (10-15/64”)160 (6-19/64”)160 (6-19/64”)260 (10-15/64”)160 (6-19/64”)160 (6-19/64”)260 (10-15/64”)160 (6-19/64”)260 (10-15/64”)160 (6-19/64”)260 (10-15/64”)260 (10-15/64”)260 (10-15/64”)250 (9-27/32”)450 (17-23/32”)
50 (1-31/32”) 50 (1-31/32”)100 (3-15/16”) 50 (1-31/32”) 50 (1-31/32”)100 (3-15/16”)100 (3-15/16”)100 (3-15/16”)100 (3-15/16”)100 (3-15/16”)100 (3-15/16”)100 (3-15/16”)100 (3-15/16”)100 (3-15/16”)100 (3-15/16”)200 (7-7/8”)100 (3-15/16”)200 (7-7/8”)100 (3-15/16”) 88 (3-15/32”)187 (7-23/64”) 88 (3-15/32”)187 (7-23/64”) 88 (3-15/32”)187 (7-23/64”) 87 (3-27/64”) 87 (3-27/64”) 87 (3-27/64”)186 (7-21/64”) 87 (3-27/64”)186 (7-21/64”) 85 (3-11/32”) 85 (3-11/32”)186 (7-21/64”) 85 (3-11/32”) 85 (3-11/32”)185 (7-9/32”) 90 (3-35/64”)185 (7-9/32”) 90 (3-17/32”)185 (7-9/32”)175 (6-57/64”)175 (6-57/64”)173 (6-13/16”)375 (14-49/64”)
303571303575303578303576303577303579303580303581303582303583303584303585303586303587303588303604303589303605303590303591303606303592303607303593303608303594303595303596303609303597303610303598303599303611303600303601308485303602303612303603303613303614303615308486303616
Bolt placing operation with Chemical Anchor
Bull Point (SDS-plus shank)
Cutter (SDS-plus shank)
Grooving Chisel (SDS-plus shank)
Cold Chisel (SDS-plus shank)
Demolition
D
L2L1
D (mm) L1 (mm) L2 (mm) Code No.
Part Name
Rubber Cap Chuck HandleChuck Adapter (G) (SDS-Plus)Drill Chuck (13VLRB-D) with Chuck WrenchSpecial Screw (M6 left-hand threaded)Chuck HandleDrill Chuck and Adapter Set inc. Drill Chuck (13VLRB-D) and Chuck Adapter
13mm (33/64”) Hammer Drill Chuck Set inc. Chuck Handle and Rubber Cap
Code No.
303332
321825
303335303334303623321814995344303334
Socket Square Size (mm)12.7 (1/2”)19.0 (3/4”)
Code No.303044303045
L (mm)
250 (10”)
Code No.Bull PointRoundSquare
303046316656
Part Name150 (6”)250 (10”)250 (10”)150 (6”)250 (10”)
L (mm) W (mm)40 (1-9/16”)40 (1-9/16”)23.5 (59/64”)20 (3/4”)20 (3/4”)
Code No.323548316658316659323549316657
Cutter
Cold Chisel
Grooving Chisel
Top-Class*2
Capabilities
Fast Change betweenSDS-plus drill bit holder Drill chuck holderand
High Efficiency & Maintenance-Free Brushless Motor
Dust ExtractionDust Cup
Dust Collector (B) Ass’y
Grease for Rotary HammerOther accessories
Part Name Dust Extraction System for DH36DBLDust Extraction System for DH36DBQLDust CupDust Collector (B) Ass’y
Code No.402933402934971787306885
Volume500g 60g
Code No.335781335782
Note: Use a drill bit not longer than 166mm.
(for DH36DBL)
Make sure to use the genuine grease designated by us.
Note: Do not use No. 980927 or No. 981840 grease for the DH36DBL and DH36DBQL.
(500g) (60g)
Dust Extraction SystemChemical Anchor Adapter (SDS-plus shank)
Available late 2016.
DH 36DBQL
Top-class
The cordless rotary hammers that have it all
The grip of the handle and the drill bit headare on the same line of action, which makes applying force to drill easier.
When the tool bit is suddenly overburdened during operation, the slip clutch works or the tool’s built-in controller stops the motor’s output before the entire tool jerks.
Free from trouble including armature burnout, layer short or commutator wear even in severe work environments.
The chisel can be rotated in multiple angles with the change lever positioned at ‘neutral’.
Multiple bit-angle settings
Significantly extended product life cycle
No carbon brush replacement required.
NEW 36V Lithium-ion Battery
BSL 3660
Reactive Force Control
Improved handling
Caution!
Depending on operating conditions, the Reactive Force Control function may not work or may not provide the specified performance. Make sure that the workpiece is placed and supported properly, and that the main unit is held firmly during operation.
Top-class Runtime
Fast Chargingoffered by Hitachi’s original charging technology
Drill bit head
Grip of the handle
The grip of the handle is close to the center of gravity for easier handling.
385Up to
BSL 366036V
drastically reduces charging time by efficiently cooling both the battery and charger at the same time during charging.
Built-in cooling system
6.0Ah
Center of gravity
*1 As of April 2016. Among 36V cordless rotary hammers made by leading power tool manufacturers (surveyed by Hitachi Koki).*2 A comparison between the DH36DBL and the previous model DH36DAL (the value may vary according to conditions).*3 Compatible with the DH36DBL and DH36DBQL only.*4 Included batteries vary by country or area.
Grip of the handle
BrushlessMotorBrushlessMotorMore durability.Longer motor life.
Maintenance-free
Top-Class*1 Capabilities
The highly efficient brushless motor and the optimized hammering mechanism achieves the top-class*1 drilling speed and demolition performance.
Drilling Speed
Demolition Performance
Drilling Speed
Demolition Performance
*1 Top-class *1
*1
*3 *4
*4*3
15%Faster
Up to *2
1.4XUp to
*2
Number of 40mm deep holes drilled into concrete with a 8.5 drill bit
holes per charge
min.
Approx.
602.6Ah
min.
Approx.
25
● Lithium-ion batteries that exceed a power output of 100Wh are considered to be in the freight classification of Dangerous Goods and will require special application procedures.
● For transportation abroad, you must comply with international law and the rules and regulations of the destination country.
Notify the transporting company that a package contains a lithium-ion battery, inform the company of its power output and follow the instructions of the transportation company when arranging transport.
REGARDING LITHIUM-ION BATTERY TRANSPORTATION
WARNING
More
*4
*4
Convenient carrying case
Large charge indicator lamp with 4 color LED status lights
Low-temperature charge (-10°and above)
Battery capacity lamp (4 stages)
The rotary hammer can be stored in the case with the side handle attached.
allows for fast change between the SDS-plus drill bit holder and the drill chuck holder (DH36DBQL only).
Quick-release tool retainer
SDS-plus drill bit holder
CHANGE
Drill chuck holder
*Bit is optional
Note : Turn the change lever to "Hammering only" mode when replacing a tool retainer with another. Use the machine only in "Rotation only" mode when the drill chuck holder installed.
NEW UC 36YSL 36V