REV.01
Customer Approval
Checked By
Written By
Approved By
Approved by Checked By
Model
Issued Date
Description
LMMTP34V1ACWZ140-C75
2015 - 09 - 16
SMD Type LED
Contact Point
Tel : 82-31-213-9200
Fax : 82-31-213-9210
Homepage : www.Lumimicro.com
SPECIFICATION
MODEL : ( LMMTP34V1ACWZ140-C75 )
Customer :
Http://www.lumimicro.com 1/12
REV.01
1. Description
1) Feature
2) Part No
3) Outline Dimensions
4) Recommend Solder Pattern
5) LED Circuit Diagram
2. Absolute Maximum Ratings
3. Characteristics
1) Electro / Optical Characteristics
2) Color Coordinates Rank
3) VF Rank
4) Luminous Intensity Rank
5) RANK[Bin] Description
4. Typical Characteristics
5. Reliability Test Items & Conditions
6. Soldering Contentions
7. Packing
1) Taping Dimensions
2) Reel Dimensions
3) Packing Spec
4) Label Spec
8. Precaution For Use
9. Revision History
Contents
Http://www.lumimicro.com 2/12
REV.01
1. Description
1) Feature
. Built-in 1 chip White Colored LED
. Pb-free Reflow Soldering Application
. Rohs Compliant
. External dimensions: 3.4 x 3.3 x 1.9T mm
2) Part No
Part No : LMMTP34V1ACWZ140-C75
: LUMIMICRO.Ltd
: Customized C.I.E For Customer
: Top View LED(SMD Type)
: Package Size (3.4*3.3*1.9T)
: Chip Quantity
: Polarity ( A : Anode / C : Cathode)
: White Color
: Built in Zener (X : NO ZENER / Z : ZENER)
: Forward Current 140mA
: CRI Min. 75
3) Outline Dimensions (Unit : mm)
* Anode : ①, ③, ④, ⑥ / Cathode : ⑤ / Non Polar : ②
4) Recommend Solder Pattern 5) LED Circuit Diagram
TP
34V
1
C75
LUMIMICRO LED Part No. Explanation
LM
140
Z
CW
M
A
Anode
①, ③, ④, ⑥
Cathode
⑤
Http://www.lumimicro.com 3/12
REV.01
2. Absolute Maximum Ratings
3. Characteristics
1) Electro / Optical Characteristics
[1] Thermal Resistance : Rth(Junction - Solder)
* Tolerance : VF=±0.2V , Iv=±10% , Chromaticity Coordinate=±0.01
2) Color Coordinates Rank
2.9 -
-
9.0 cd
Parameter
IF
Symbol Value Unit
Pd
-40 ~ +125Storage Temperature
Soldering Temperature
300Forward Current
260 (for 10 sec)
-
Junction Temperature
VF IF=140mA
℃
℃Topr
Tstg
150
4.1 V
40
-
1.5㏀,100pF
120 deg.
KV
℃
Max
mA
Power Dissipation
Tj
℃
-40 ~ +125Operating Temperature
Tsld
mW
Unit
Forward Voltage
Parameter Symbol
2Θ1/2
TypMinCondition
IF=140mA
5 -
Luminous Intensity Iv -
Viewing Angle IF=140mA
ESD
℃/W-Thermal Resistance[1] Rth(J-S) IF=140mA
0.29
0.30
0.31
0.32
0.33
0.34
0.35
0.36
0.37
0.38
0.32 0.33 0.33 0.34 0.34 0.35 0.35 0.36 0.36
Cy
Cx
A1
A0
A2
Http://www.lumimicro.com 4/12
REV.01
3) VF Rank
4) Luminous Intensity Rank
5) RANK[Bin] Description
CCT Rank Iv Rank VF Rank
A1- 1L3- 3V2
Rank Name
Flux
Rank Min. Max. Typ.
1L1 7.1 9.0 24.0
1L2 9.0 11.2 30.0
1L3 11.2 14.0 37.5
1L4 14.0 18.0 48.0
* Luminous Flux : Only reference data.
Iv
cd, lm
@140mA
Unit
0.3243 0.3207 0.3337 0.3354 0.3435 0.3499
0.3337 0.3354 0.3435 0.3499 0.3533 0.3643
0.3337 0.3158 0.3435 0.3312 0.3533 0.3465
0.3247 0.3019 0.3337 0.3158 0.3435 0.3312
A2A0 A1
Rank Min. Max. Unit
3V1 3.00 3.10
3V2 3.10 3.20
3V3 3.20 3.30
3V4 3.30 3.40
3V5 3.40 3.50
3V6 3.50 3.60
3V7 3.60 3.70
3V8 3.70 3.80
3V9 3.80 3.90
4V0 3.90 4.00
[V]
@140mA
Http://www.lumimicro.com 5/12
REV.01
4. Typical Characteristics
▶ Forward Voltage vs. ▶ Forward Current vs.
Forward Current [@ 25℃] Relative Luminous Intensity [25℃]
▶ Ambient Temperature vs. ▶ Ambient Temperature vs.
Relative Luminous Intensity [If=140mA] Relative Forward Voltage [If=140mA]
▶ Ambient Temperature vs. ▶ Viewing Angle
Relative Chromaticity Coordinate [If=140mA]
Http://www.lumimicro.com 6/12
REV.01
5. Reliability Test Items & Conditions
▶ Preconditioning : Jedec Level II
No
Failure criteria:
• Electrical failures :Vf (If = 140mA)Initial Value ±10%
• Optical failures :IV (If = 140mA)Initial Value ±30%
• Visual inspection :Non Broken damaged package
Conclusion: Devices fulfill the reliability requirements.
Fail /SampleITEMS CONDITION NOTE
Elec. Opt. Vis.
30 0 0
30 0 0
0
0
0
000
0 0
00030
30 0 0 0
00077
77 0 0 0
0
030
0
0
0
1
1
1
1
77
0
0
0
30
30
ESD
JESD22-A114
Vibration Variable Frequency
(VVF) JESD22 B-103
Thermal Shock
(MIL883-2007)
High temperature storage life test
(HTSL) JESD22-A103
Low temperature storage life test
(LTSL) JESD22-A103
-40°C/+125°C
15min each extreme
-40/+125°C, IF = 140mA
ton/off = 5min
TA = -40°C
IF = 140mA
TA = 100°C
IF = 140mA
HBM :
100pF / 1.5kohm > ±2KV / 3 times
0 0
Temperature & humidity bias
(T&HB) JESD22-A101
TA = 85°C, R.H.= 85%
IF = 140mA1000 h 3 77 0
Resistance to soldering heat
(RTSH) JESD22-A113
Temperature cycle
(TC) JESD22-A104
Power Temp. Cycling
(PTC) JESD22-A105
Steady state life test
(SSLT) JESD22-A108
Steady state life test
(SSLT) JESD22-A108
1000 cycle
1000 h
0.06 inch displacement, 20 to 100 Hz,
50 g 100 Hz to 2kHz,
-45°C/125°C, 30 min.
dwell, <10 second transfer
TA = 100 °C.
TA = -40 °C.
1000 h
1000 h
2000 V
1
Accelerated corrosion test
25C 75%rh 10ppm H2S
H2S corrosion test
IEC 60068-2-43
1000 cycle
1000 h
1000 h
504 h
1
1
3
3
1
1
Test 조건 기간 # LOTS # TestedFAILURES
3x 1 30Reflow soldering 260°C 0
TEST 항목
Http://www.lumimicro.com 8/12
REV.01
6. Soldering conditions
1) Reflow Conditions ( With Pb )
Preliminary heating to be at 150°C max. for 2 minutes max.
Soldering heat to be at 240°C max. for 10 seconds max.
Recommended Solder Paste : Alloy- 63Sn/37Pb Model: OL107B,
2) Pb free Reflow Conditions
Preliminary heating to be at 170°C max. for 2 minutes max.
Soldering heat to be at 260°C max. for 10 seconds max.
Recommended Pb free Paste Alloy: 96.5Sn/3Ag/0.5Cu. - Model: OL204
3) For Manual Soldering
Not more than 5seconds @MAX300°C, under soldering iron
Max 120 ~ 150°C
Max 240°C
120sec.Max
10sec.Max
Time
Temp.
Max 150 ~ 170°C
Max 260°C
90 ~120sec.Max
10sec.Max
Time
Temp.
Http://www.lumimicro.com 9/12
REV.01
7. Packing
1) Taping pocket Dimension
2) Reel Dimensions
3) Packing Spec
. Aluminum Bag
. Box Spec
Max 3,500 EA mm ± 0.1
ToleranceOne Reel
Dimensions(Width/Thickness)
275/ 285/ 200[mm] 10 Max : 35,000ea
Reel in a Bag Silica in a Bag Goods QNT in a Bag
Reels in Box Goods in QNT in Box
Aluminum Bag 1 Reel 1 Silica, 1 Indicator Max : 3,500ea
Unit
Http://www.lumimicro.com 10/12
REV.01
4) Label Spec
8. Precaution For Use
This device should not be used in any type of fluid such as water, oil, organic solvent, etc
When washing is required, IPA should be used. .
When the LEDs are illuminating, operating current should be decided after considering the ambient
maximum temperature.
LEDs must be stored to maintain a clean atmosphere. If the LEDs are stored for 3months or more after
being shipped from LUMIMICRO, sealed container with a nitrogen atmosphere should be used for
storage.
The LEDs must be dip soldered within seven days after opening the moisture-proof packing.
Repack unused Products with anti-moisture packing, fold to close any opening and then store in dry
place. The appearance and specifications of the product may be modified for improvement without
notice. These LEDs are sensitive to the static electricity and surge. It is recommended to use a wrist
band or anti-electrostatic glove when handling the LEDs. If Over voltage which exceeds the absolute
maximum rating is applied to LEDs, it will cause damage in LEDs and result in destruction. Damaged
LEDs will show some unusual characteristics such as remarkably increased leak current, turn-on
voltage becomes lower and the LEDs get unlighted at low current.
Model : LMMTP34V1ACWZ140-C75 Model name
Rank : A1-1L3-3V2 Rank name
Date : R20150424※※※※ Taping date
QTY : 2,000 EA / ※※※※※※※※※※※※ Quantity
※※-※※※※※※※※※ LUMIMICRO
Http://www.lumimicro.com 11/12