+ All Categories
Home > Documents > SPECIFICATION TARGET RIFLES RANGEMASTER · A high performance Target Rifle manufactured from...

SPECIFICATION TARGET RIFLES RANGEMASTER · A high performance Target Rifle manufactured from...

Date post: 10-Oct-2020
Category:
Upload: others
View: 0 times
Download: 0 times
Share this document with a friend
2
RANGEMASTER SPECIFICATION TARGET RIFLES RPA ELITE RPA RANGER Calibre 308 Winchester 308 Winchester Barrel Length 30” 30” 762mm 762mm Twist Rate 1 turn in 13” 1 turn in 13” 1 turn in 330mm 1 turn in 330mm Overall Length 49” 49” 1242mm 1242mm Weight 13.5 lb 11.25 lb 6.1 Kg 5.1 Kg Scope mount bases Option Option Sling attachment points Forend rail Forend rail ACCESSORIES AVAILABLE Magnetic removable cheek piece [A] Forend rail [B] 3 way butt plate [C] RANGEMASTER Trakker ladder fore-sight 22mm [D] RANGEMASTER Trakker rear sight (top mount) [E] RANGEMASTER Trakker fixed height fore-sight 22mm [F] Picatinny scope rail Alternative options/specifications available as a custom order. Contact RANGEMASTER Custom at: Email: [email protected] [A] [B] [C] [D] [F] [E] Rangemaster Precision Arms PO Box 441, Tonbridge, Kent TN9 9DZ England Telephone: +44 (0) 845 880 3222 Fax: +44 (0) 845 880 3232 Email: [email protected] Web: www.rangemasterprecisionarms.com RANGEMASTER operates a policy of continuous development and the information in this brochure may be updated without notice. ISO 9001-2000
Transcript
Page 1: SPECIFICATION TARGET RIFLES RANGEMASTER · A high performance Target Rifle manufactured from RANGEMASTER’s world beating products, designed for professionals and enthusiasts alike.

RANGEMASTER SPECIFICATION TARGET RIFLES

RPA ELITE RPA RANGER

Calibre 308 Winchester 308 Winchester

Barrel Length 30” 30” 762mm 762mm

Twist Rate 1 turn in 13” 1 turn in 13” 1 turn in 330mm 1 turn in 330mm

Overall Length 49” 49” 1242mm 1242mm

Weight 13.5 lb 11.25 lb 6.1 Kg 5.1 Kg

Scope mount bases Option Option

Sling attachment points Forend rail Forend rail

ACCESSORIES AVAILABLE

• Magnetic removable cheek piece [A] • Forend rail [B] • 3 way butt plate [C] • RANGEMASTER Trakker ladder fore-sight 22mm [D]

• RANGEMASTER Trakker rear sight (top mount) [E] • RANGEMASTER Trakker fixed height fore-sight 22mm [F] • Picatinny scope rail

Alternative options/specifications available as a custom order. Contact RANGEMASTER Custom at: Email: [email protected]

[A] [B] [C]

[D] [F] [E]

Rangemaster Precision Arms PO Box 441, Tonbridge, Kent TN9 9DZ England Telephone: +44 (0) 845 880 3222 Fax: +44 (0) 845 880 3232 Email: [email protected] Web: www.rangemasterprecisionarms.com RANGEMASTER operates a policy of continuous development and the information in this brochure may be updated without notice.ISO 9001-2000

Page 2: SPECIFICATION TARGET RIFLES RANGEMASTER · A high performance Target Rifle manufactured from RANGEMASTER’s world beating products, designed for professionals and enthusiasts alike.

A high performance Target Rifle manufactured from RANGEMASTER’s world beating products, designed for professionals and enthusiasts alike.

The heart of RANGEMASTER Target Rifles is either an

RANGEMASTER Quadlock® or Quadlite® action,

renowned for accuracy, durability and safety.

Available in a true left hand configuration (custom option).

SAFETY & ENGINEERING

Safety is a major factor with RANGEMASTER rifles, the receiver and bolt is produced from a solid billet of high tensile steel, there are no internal components to work loose and cause injury to the rifle operator.

CRAFTED PRECISION

• Action and bolt coatings are extremely hard wearing, corrosion resistant and have a very low coefficient of friction; wear is therefore greatly reduced.

• Triggers are fully adjustable and easily maintained. RANGEMASTER Target Rifles feature a two stage trigger operation with a pull weight factory set at 1.5Kg. An extremely fast lock time (time from trigger pull to detonation) is 1.5 milli-seconds. This further improves accuracy when shooting at long range.

• Super match quality barrel chambered to internationally recognised specification.

• The barrel is turned with a spigot at the muzzle to accept RANGEMASTER Trakker®

front sights.

RANGEMASTER RANGER

This rifle offers an alternate target rifle design and will satisfy those shooters who prefer a lighter and more traditionally styled rifle. The heart of the RANGEMASTER Ranger® is the RANGEMASTER 4-lug Quadlite® action. The stock comes fitted with an adjustable cheek piece with length of pull adjustment by removable spacers. Available in your choice of colour.

Rear sight fitment is via a sight mounting bracket (supplied). The action is drilled & tapped to accept a scope rail.

RANGEMASTER ELITE

This will probably be the most accurate Rifle you will ever own. Designed for the precision shooter. The heart of the RANGEMASTER Elite Target Rifle is the RANGEMASTER 4-lug Quadlock®

action, bedded into a beautifully crafted composite stock, in your choice of colour. This stock comes fitted with an adjustable magnetic removable cheek piece [A], forend rail [B] and a 3 way adjustable butt plate [C] as standard.

Rear sight fitment is direct onto the action via the inbuilt dove tail. The action is drilled and tapped to accept a scope rail.

RANGEMASTER ELITE

RANGEMASTER RANGER


Recommended