Outdoor-rated Hoods for the Outdoor Kitchen1

Semi-Custom Hoods – Designed for Today’s High Performance Barbeques

PPX54S Pinnacle Island Hood in stainless

• All stainless steel semi-custom hoods are UL listed for both indoor and outdoor kitchens

• New 33” depth wall models for expanded capturing area over deeper grills

• 12-step fabrication process to ensure smooth edges and seamless construction

• High performance Internal, Inline and remote blower options (sold separately)

• Installation Flexibility with top or rear discharge options (wall hoods)

• Select hood width that is a minimum of 6” wider than the grill being installed

• Select hood depth that best covers grill selected2.

WSX Slant Line Wall Hoods (shown with polished accents) (33” depth available in 36, 48, 60” widths

27” depth available in 30, 36, 42, 48, 54, 60” widths

PPX Pinnacle Island hood (shown) 30” depth available in 36, 42, 54” widths

Chimney adjusts to fit 8 to 10 foot ceilings (included)

6” and 12” duct covers available

1Wind Crest hoods are UL listed for outdoor applications when installed in semi-covered or covered patios and Lanais. Proper ventilation is highly recommended over domestic gas or electric fueled grills. 2Please review the grill manufacturer’s required clearances before selecting your hood. Typical spacing off the back wall is between 3 and 6-inches, which will require a minimum 27” hood depth.

Litho date: January 2010 Part No. 11615.00 Copyright ® 2010 Wind Crest™ by CNP Industries

(877) 387-6721 • www.windcrestcnp.comPlease refer to the installation instructions found on our website, www.windcrestcnp.com, before making any cutouts.

WSX Slant Line Wall Hood

PPX Pinnacle Island

*Recommended spacing between hood & Grill (PPX hood shown)

Specifications – Semi-Custom Hoods Recommended for Outdoors

Model # WSX _ _ 7 WSX _ _ 33 PPXInstallation Wall Wall Island

Discharge Direction Vertical or Horizontal Vertical or Horizontal Vertical

Duct Size for blowers recommended 10” Round 10” Round 10” Round

Finishes Available1 S/SPC S S

Max power supply2 15 Amps @ 120Vac, 60Hz

Features18 gauge, 304 Stainless Steel

Continuous hand-welded seams

3-speed electro-mechanical blower control

50 W Halogen lights with Hi/Lo setting3

Commercial-grade stainless baffle filters4

Heavy aluminum mesh filters4

Adjustable chimney extensions5

Hood depth 27” 33” 30”

Accessories6” and 12” canopy extensions in stainless - “CE” - “CE” N/A

Remote-mounted blower switch (optional)6

Blower Options & (Starting Transitions)6 CFM CFM CFM

VEN120I – Internal Blower (#11257 – included) 1200 1200 1200

VEN120L – Inline Blower (#11257 – needed) 1200 1200 1200

VEN100E – Remote Blower (#11257 – needed) 1000 1000 1000

VEN150E – Remote Blower (#11257 – needed) 1500 1500 1500

1 Only Stainless (S) and Stainless with Polished Accents (SPC) are approved for outdoor installations. 220 Amps @ 120V AC, 60 Hz is required when installed with the VEN150E remote ventilator. 3Halogen lighting comes standard. Two bulbs for hoods 30” to 48” wide, four bulbs for hoods 54” or wider. 4Both the aluminum mesh and stainless baffle filters are dishwasher safe. 5PPX hoods come standard with a chimney extension to accommodate an 8 to 10’ ceiling height. 6 Remote-mounted blower switch, as well as specialty hood transitions for side or rear exhaust, etc., can be ordered through your local retailer

16"all widths12"

2"

36, 42, 54"30"

47"max

15"

32"max15"min

12"

18"

33"

36, 48, 60"

3"WSX_ _ 33

12"

18"

27"

30, 36, 42,48, 54, 60"

3" WSX_ _ 7

15" MIN TO 32" MAX

15"

* 30" TO 36"

36" TO FLOOR

15"

GRILL

CL

CEILING

10” Rd.duct

Transition#11257

Side View