+ All Categories
Home > Documents > SPECIFICATIONS - ACCLAIM LIGHTING · LIGHTING Specification Sheet 2.3.6 Flex Tube SE SC is a side...

SPECIFICATIONS - ACCLAIM LIGHTING · LIGHTING Specification Sheet 2.3.6 Flex Tube SE SC is a side...

Date post: 23-Aug-2020
Category:
Upload: others
View: 3 times
Download: 0 times
Share this document with a friend
5
SPECIFICATIONS Color Temperature 2700K, 3000K, 3500K, 4000K, Red (83.33mm module), Green, Blue Spool Length + Cut Points 32’ (10m), Cut points every 2.18“ (55.56mm) Beam Angle 160º Max Fixture Runs 32’ (10m) - 1 spool maximum Photometrics 171 Lumens per foot, 54 center beam candlepower (3500K), >80 CRI Dimming Protocol DMX-512, 0-10V (Sink & Source) or DALI Mounting via Self lock mounting channel Power Consumption 106W @ 32‘ (1 Spool), minimum 3.3W per foot Operating Voltage 24VDC Lumen Maintenance L70 @ 50,000 Hours (25º C) Housing & Finish White UV coated, flexible PVC jacket with silicone top Installation Temperature 32°F to 113°F (-0°C to 45°C) Operating Temperature -40°F to 131°F (-40°C to 55°C) IP / IK Rating IP68/IP67† - Wet Location / Submersible*, IK 08 - Up 5 Joule Impact Energy Protection Fixture Connectors 10‘ (3m) Attached injection molded feed cable - rear, side or end feed options (see page 2) Warranty 3 Years standard, 5 Years optional (additional charge) Weight 8 lbs (3.62 kg) Dimensions W 0.72” x H 0.72” x L 32’ (18.5mm x 16mm x 10m) Certifications ACCLAIM LIGHTING Specification Sheet 2.3.6 www.acclaimlighting.com Flex Tube SE SC is a side emitting, outdoor rated flexible LED tube. It is available in multiple color temperatures of white, as well as single red, green, and blue versions. It features an IP68 rating, cut points every 2.18”, and a minimum bend radius of 11.8” (300mm). Sold in spools of 32’ (10m), it is impact, UV, and saltwater resistant. Client: Project: Type: Order Code: Quantity: FLEX TUBE SE SC *UL approval limits submersible installation to non-human occupied and freshwater locations only. All cables must be landed in environmentally suitable junction boxes. † If non-injection molded feed cables or end caps are used, the rating drops from IP68 to IP67
Transcript
Page 1: SPECIFICATIONS - ACCLAIM LIGHTING · LIGHTING Specification Sheet 2.3.6 Flex Tube SE SC is a side emitting, outdoor rated flexible LED tube. It is available in multiple color temperatures

SPECIFICATIONS

Color Temperature 2700K, 3000K, 3500K, 4000K, Red (83.33mm module), Green, Blue

Spool Length + Cut Points 32’ (10m), Cut points every 2.18“ (55.56mm)

Beam Angle 160º

Max Fixture Runs 32’ (10m) - 1 spool maximum

Photometrics 171 Lumens per foot, 54 center beam candlepower (3500K), >80 CRI

Dimming Protocol DMX-512, 0-10V (Sink & Source) or DALI

Mounting via Self lock mounting channel

Power Consumption 106W @ 32‘ (1 Spool), minimum 3.3W per foot

Operating Voltage 24VDC

Lumen Maintenance L70 @ 50,000 Hours (25º C)

Housing & Finish White UV coated, flexible PVC jacket with silicone top

Installation Temperature 32°F to 113°F (-0°C to 45°C)

Operating Temperature -40°F to 131°F (-40°C to 55°C)

IP / IK Rating IP68/IP67† - Wet Location / Submersible*, IK 08 - Up 5 Joule Impact Energy Protection

Fixture Connectors 10‘ (3m) Attached injection molded feed cable - rear, side or end feed options (see page 2)

Warranty 3 Years standard, 5 Years optional (additional charge)

Weight 8 lbs (3.62 kg)

Dimensions W 0.72” x H 0.72” x L 32’ (18.5mm x 16mm x 10m)

Certifications

ACCLAIMLIGHTING

Specification Sheet 2.3.6www.acclaimlighting.com

Flex Tube SE SC is a side emitting, outdoor rated flexible LED tube. It is available in multiple color temperatures of white, as well assingle red, green, and blue versions. It features an IP68 rating, cut points every 2.18”, and a minimum bend radius of 11.8” (300mm). Sold in spools of 32’ (10m), it is impact, UV, and saltwater resistant.

Client:

Project:

Type:

Order Code:

Quantity:

FLEX TUBE SE SC ™

*UL approval limits submersible installation to non-human occupied and freshwater locations only. All cables must be landed in environmentally suitable junction boxes.† If non-injection molded feed cables or end caps are used, the rating drops from IP68 to IP67

Page 2: SPECIFICATIONS - ACCLAIM LIGHTING · LIGHTING Specification Sheet 2.3.6 Flex Tube SE SC is a side emitting, outdoor rated flexible LED tube. It is available in multiple color temperatures

ACCLAIMLIGHTING

Specification Sheet 2.3.6www.acclaimlighting.com

Mod

el

Cont

rol

Hous

ing

Colo

rFe

ed C

able

Con

fig

Leng

thBe

amCo

lor

Inpu

t vol

tage

Color: A = 2700K*B = 3000KD = 3500K*E = 4000KN = Red* - (83.33mm module)P = Green*Q = Blue*

Length: A = 32‘ (10m)X = Custom*†

Beam: A = 160°

Feed Cable: 4 = Side Feed*5 = Rear Feed6 = End Feed*

Housing Color: 2 = White

Control: 1 = Standard SCOn/Off or DMX

ORDER CODES * I n d i c a t e s S p e c i a l O r d e r

FTU - 1 2 # - A A # N Input Voltage: N = 24VDC

FTU-124-####, Side Feed FTU-126-####, End FeedFTU-125-####, Rear Feed

FLEX TUBE SE SC ™

*UL approval limits submersible installation to non-human occupied and freshwater locations only. All cables must be landed in environmentally suitable junction boxes.

† : When ordering custom lengths, please specify number of 2.18” (55.56mm) sections required after X (32.8’, 10m maximum).Example order code: FTU-125-X18ABN = 55.56mm x 18 / 1m spool

Page 3: SPECIFICATIONS - ACCLAIM LIGHTING · LIGHTING Specification Sheet 2.3.6 Flex Tube SE SC is a side emitting, outdoor rated flexible LED tube. It is available in multiple color temperatures

ACCLAIMLIGHTING

Specification Sheet 2.3.6 www.acclaimlighting.com

Self Lock Mounting Channels

Wiring Accessories

FTUFC2Flex Tube SE SC feed cable kit10’ (3m)

FTSEEC2Flex Tube SE end cap

RELATED COMPONENTS

Power Supplies (Non-dim or with DMX)

APS-240-242 Spools Maximum240W, 24VDC, Dry location, DIN Rail Mount115-230VAC (47-63Hz) Input

APS-480-244 Spools Maximum480W, 24VDC, Dry location, DIN Rail Mount115-230VAC (47-63Hz) Input

DMX Driver AL Driver 1

ALD001AL Driver 1, 1 Spool Max.Single channel DMX or 0-10V (sink & source) driverUse in conjunction with APS Series

FTTK2Flex Tube Install KitIncludes cutter and insert assists

FLEX TUBE SE SC ™

If non-injection molded feed cables or end caps are used, the rating drops from IP68 to IP67

FTSECH2000Flex Tube SE self lock mounting channel6.56‘ (2m)

FTSECH1000Flex Tube SE self lock mounting channel3.28‘ (1m)

FTSECH35Flex Tube SE self lock mounting channel1.37” (35mm)

ALD-800-24AL Driver 800 24V, 6 spools max800W 24V power supply + DMX, 0-10V (sink & source) & DALI driver10 output ports, 100-277VAC input

ALD-400-24AL Driver 400 24V, 3 spools max400W 24V power supply + DMX, 0-10V (sink & source) & DALI driver6 output ports, 100-277VAC input

ALD-200-24AL Driver 200 24V, 1 spool max200W 24V power supply DMX, 0-10V (sink & source) & DALI driver4 output ports, 100-277VAC input

DMX Drivers AL Driver 200/400/800

Page 4: SPECIFICATIONS - ACCLAIM LIGHTING · LIGHTING Specification Sheet 2.3.6 Flex Tube SE SC is a side emitting, outdoor rated flexible LED tube. It is available in multiple color temperatures

ACCLAIMLIGHTING

PHOTOMETRICS

Total Lumens

Specification Sheet 2.3.6www.acclaimlighting.com

3000K

For additional color data and IES files, please visit acclaimlighting.com

CRI

Ra: 79.9R9: 10.6

149.9

Center Beam Candlepower

47

Total Lumens

3500K

CRI

Ra: 80.8R9: -0.7

171.1

Center Beam Candlepower

54

Total Lumens

4000K

CRI

Ra: 83.4R9: 13.6

133.9

Center Beam Candlepower

42

FLEX TUBE SE SC ™

Page 5: SPECIFICATIONS - ACCLAIM LIGHTING · LIGHTING Specification Sheet 2.3.6 Flex Tube SE SC is a side emitting, outdoor rated flexible LED tube. It is available in multiple color temperatures

ACCLAIMLIGHTING

Specification Sheet 2.3.6 www.acclaimlighting.com

Wire size guide

Gauge Cond. Max feet to flex

18 AWG 2 40

14 AWG 2 100

12 AWG 2 180

WIRING

Flex Tube SE SC connections

Non-dimUp to four10 meter Flex Tube SE SC spools can be run from a single APS-480-24 power supply unit.

Link cables require 2 cores.

Mains input (115-230VAC

47-63Hz)

APS-480-24 power supply

unit

DMX & 0-10V dimming controlUp to six 10 meter Flex Tube SE SC spools can be run from a single AL Driver 800 unit.

Link cables require 2 cores. .

DMX input

AL Driver 800 unit

Up to 60 meters

of Flex Tube SE SC can be driven across

the ten channels.

Ensure that no more than 10 meters is placed on any one output.

FLEX TUBE SE SC ™


Recommended