+ All Categories
Home > Documents > Specifications - Ameritech Productsameritechproducts.net/wp-content/uploads/2017/11/AMMO-D... ·...

Specifications - Ameritech Productsameritechproducts.net/wp-content/uploads/2017/11/AMMO-D... ·...

Date post: 04-Sep-2020
Category:
Upload: others
View: 0 times
Download: 0 times
Share this document with a friend
2
Specifications: Odor ....................................................................Pleasant Appearance.......................................................Light blue pH...................................................................11.0 +/- 0.5 Specific Gravity .........................................................0.999 Flash Point............................................................> 145 0 F Stability ...............................................One year minimum AMERITECH Technology for Advanced Cleaning 1401 AIP Drive, Middletown, Pa 17057 • 800-262-4360 HMIS Health 1 Flammability 1 Reactivity 0 Personal Protection (PPE) A Made in the USA AMMO-D GLASS & HARD SURFACE CLEANER is one of the highest performing glass cleaners on the market today! It cleans glass and mirrors easily and quickly, leaving them perfectly clean and streak-free! Since it is formulated with ammonia It is phenomenal for removing finger marks, grease, cigarette smoke residue, water stains, soot, etc. from windows, partitions, mirrors, showcases, auto glass, etc! It also has the ability to cut through many heavier soils often found in factories, offices, schools, hospitals, hotels, motels, etc. In addition, AMMO-D GLASS & HARD SURFACE CLEANER is excellent for a huge variety of other hard surfaces, such as desktops, countertops, ceramic tile, porcelain, Formica ® , stainless steel and many, many others. Formulated especially for industrial and institutional use. Directions: Spray onto your lint-free cleaning cloth or directly onto the surface to be cleaned. Then, wipe to a sparkling film-free surface! Ammo-D Glass & Hard Surface Cleaner Ammo-D Glass & Hard Surface Cleaner WITH AMMONIA
Transcript
Page 1: Specifications - Ameritech Productsameritechproducts.net/wp-content/uploads/2017/11/AMMO-D... · 2019. 6. 3. · Appearance and Odor Clear, colorless liquid with a pleasant scnet

Specifications:Odor....................................................................Pleasant

Appearance.......................................................Light blue

pH...................................................................11.0 +/- 0.5

Specific Gravity.........................................................0.999

Flash Point............................................................> 1450F

Stability...............................................One year minimum

AMERITECH Technology for Advanced Cleaning 1401 AIP Drive, Middletown, Pa 17057 • 800-262-4360

HMIS

Health 1

Flammability 1

Reactivity 0

Personal Protection (PPE) A Made in the USA

AMMO-D GLASS & HARD SURFACE CLEANER is one of the highest performing glass cleaners on the

market today! It cleans glass and mirrors easily and quickly, leaving them perfectly clean and streak-free!

Since it is formulated with ammonia It is phenomenal for removing finger marks, grease, cigarette

smoke residue, water stains, soot, etc. from windows, partitions, mirrors, showcases, auto glass, etc!

It also has the ability to cut through many

heavier soils often found in factories, offices,

schools, hospitals, hotels, motels, etc. In addition,

AMMO-D GLASS & HARD SURFACE CLEANER is

excellent for a huge variety of other hard surfaces,

such as desktops, countertops, ceramic tile,

porcelain, Formica®, stainless steel and many, many

others. Formulated especially for industrial and

institutional use.

Directions:

Spray onto your lint-free cleaning cloth or directly

onto the surface to be cleaned. Then, wipe to a

sparkling film-free surface!

Ammo-D

Glass & Hard Surface Cleaner

Ammo-D

Glass & Hard Surface Cleaner

WITHAMMONIA

Page 2: Specifications - Ameritech Productsameritechproducts.net/wp-content/uploads/2017/11/AMMO-D... · 2019. 6. 3. · Appearance and Odor Clear, colorless liquid with a pleasant scnet

MATERIAL SAFETY DATA SHEET(Prepared According to 29 CFR 1910.1200)

NTP IARCOSHA NONE

X X X

None to Boiling

SECTION 1 - PRODUCT IDENTIFICATIONDistributor Emergency PhoneAmeritech Services Inc 717-939-7100

Address 1401 AIP Drive, STE 100 Middletown, PA 17057

Trade Name Product Type RTU Glass & Hard Surface CleanerAMMO-D

SECTION 2 - HAZARDOUS INGREDIENTSCHEMICAL NAME/COMMON NAME CAS NO. PERCENT(optional) TLV(Source)

Isopropanol 67-63-0 50 ppm TWA (DOW IHG )

Ammonium Hydroxide 1336-21-6

SARA HAZARD TITLE III,SECTION 313-CONTAINS THE STARRED INGREDIENT(S) AT THE INDICATED PERCENTAGES

Other ingredients in this product are : Less than 1% by weight or less than 0.1% for carcinogens Not hazardous Declared to be Trade Secret

SECTION 3 - PHYSICAL DATABoiling point(°F.) Specific Gravity(H2O=1.0) (± 0.005) pH (± 0.5) 11.0near 212 0.999

Vapor Pressure(mm Hg) Vapor Density(Air=1)Unknown Unknown

XSolubility in water Complete Insoluble Emulsifiable (or Dispersible) Slight (or Partial)

XEvaporation Rate(vs. H2O) Faster Slower About the Same

Appearance and Odor Clear, colorless liquid with a pleasant scnet

SECTION 4 - FIRE AND EXPLOSION HAZARD DATALowerUpperFlammable Limits Unknown Unknown

Extinguishing Media CO2, dry chemical, foam, water spray.

Special Firefighting Procedures Do not enter confined fire-spaces without protective clothing and self-contained air supply.

Unusual Fire and Explosion Hazards None known.

SECTION 5 - REACTIVITY DATAIncompatibilityStability Stable Strong oxidizers

Hazardous Decomposition Products Carbon monoxide and other unidentified organic gases may occur during incomplete combustion.

SECTION 6 - HEALTH HAZARDSXX XPrimary Routes of Exposure Eye Skin Oral Inhalation Other

Signs Prolonged or repeated contact of product with eyes will cause irritation and reddening. May cause skin irritation with certain individuals. Ingestion of this product may causeexposed person to vomit and may result in some diarrhea.

Signs and Symptoms of Overexposure(Chronic)None knownMedical Conditions None known Carcinogen/Suspect Carcinogen Ingredients X

SECTION 7 - EMERGENCY AND FIRST AID PROCEDURESEyes Flush immediately with water for at least 15 minutes. If persistent irritation occurs, call a physician.

Skin Not applicable

Ingestion Drink large quantities of milk or water. Call a physician.

Inhalation Not applicable

SECTION 8 - SPECIAL PROTECTION INFORMATIONRespiratory Protection Not needed under normal conditions of use.

Ventilation Requirements Local Exhaust Mechanical

Protective Gloves Other Protective ClothingEye ProtectionNot required. Safety glasses/goggles Not required for normal use

SECTION 9 - SPILL OR LEAK PROCEDURESSteps to be Taken Dilute with much water and flush to drain.if Released or Spilled

Waste Disposal Methods Dispose of in accordance with applicable Federal, State and Local ordinances.

SECTION 10 - STORAGE AND HANDLING INFORMATIONDo not get in eyes.Precautions to be Taken

in Handling and Storage

and Symptomsof Overexposure(Acute)

Aggravated by Overexposure

Flash Point(T.C.C.) >145 °F.

X Room Ventilation Is Adequate

The health hazards given on the Material Safety Data Sheet apply to this product in its concentrated form (as supplied) andmay differ significantly at use dilution. The signs and symptoms of over exposure apply only to negligence in handling ormisuse of the concentrated product and not to the routine exposure to the product, under normal conditions of use.

6/10/2013DATE PREPARED

35-204A


Recommended