Specifications & Installation Instructions
1206 M Avenue Kearney, NE 68847 • P: 800.445.6404 • F: 855.234.9401 • TaskLighting.com
TABLE OF CONTENTSTR Series Angle Power Strip Specifications.........................................................pg. 3-4TR Series Angle Power Strip Custom Options.....................................................pg. 5 TR-USB Series Angle Power Strip Specifications...............................................pg. 6-7TR/TR-USB Series Angle Power Strip Installation Instructions ..........................pg. 8APT Series Angle Power Strip Specifications.....................................................pg. 9-10APT Series Angle Power Strip Installation Instructions .......................................pg. 11 Lighted Power Strip DV Series Specifications...................................................pg. 12-13Lighted Power Strip DV Series Installation Instructions.....................................pg. 14-15Lighted Power Strip RM Series Specifications...................................................pg. 16-17Lighted Power Strip RM Series Installation Instructions....................................pg. 18 sempriaLED SG9 Series Specifications.........................................................pg. 19sempriaLED SG9 Series Installation Instructions ...........................................pg. 20-21sempriaLED A Series Specifications..............................................................pg. 22sempriaLED F Series Specifications..............................................................pg. 23SsempriaLED A & F Series Installation Instructions.........................................pg. 24-25 sempriaLED R Series Specifications..............................................................pg. 26sempriaLED R Series Installation Instructions................................................pg. 27-28sempriaLED S Series Specifications...............................................................pg. 29sempriaLED S Series Installation Instructions................................................pg. 30-31sempriaLED Lighted Closet Rod Specifications...............................................pg. 32sempriaLED Lighted Closet Rod Installation Instructions...............................pg. 33sempriaLED Puck Specifications......................................................................pg. 34sempriaLED Mini Can Specifications...............................................................pg. 35sempriaLED Puck/ Mini Can Installation Instructions.......................................pg. 36sempriaLED Supporting Products...........................................................................pg. 37sempriaLED 120V Bar Light Specifications.............................................................pg. 38sempriaLED 120V Bar Light Installation Instructions................................................pg. 39
800.445.6404 • TaskLighting.com 3TR-SPEC-0618
TR Series Angle Power StripTamper Resistant Duplex Receptacles eliminate cutouts for receptacles and switches in your backsplash
Specifications
Features
• Kitchens• Baths• Offices & Computer Labs• Islands• Shops & Garages
Applications
Construction Materials: Powder Coated Aluminum
Input Voltage: 120V
Mounting: Wood Screws & Wall Anchors
Wiring: 12 ga. Romex
Environment: Dry Only
Optional Installation Components
Finish Options
Receptacle Colors
• Tamper Resistant Duplex Receptacles• Easy Installation• Designer finishes to blend with any decor• 3-Year Limited Warranty• Custom options include: USB Ports, Phone Jacks, Cable
Jacks, Data Ports. See pg. 5 for more options.
Section Drawing
Part Number Length # of Duplex Recept.
Recept.Color Finish
TR9-1ColorD-P-Finish 9" 1 B, G, W BK, BZ, SN, WT
TR12-1ColorD-P-Finish 12" 1 B, G, W BK, BZ, SN, WT
TR18-2ColorD-P-Finish 18" 2 B, G, W BK, BZ, SN, WT
TR24-2ColorD-P-Finish 24" 2 B, G, W BK, BZ, SN, WT
TR30-2ColorD-P-Finish 30" 2 B, G, W BK, BZ, SN, WT
TR36-2ColorD-P-Finish 36" 2 B, G, W BK, BZ, SN, WT
TR42-3ColorD-P-Finish 42" 3 B, G, W BK, BZ, SN, WT
TR48-3ColorD-P-Finish 48" 3 B, G, W BK, BZ, SN, WT
TR60-4ColorD-P-Finish 60" 4 B, G, W BK, BZ, SN, WT
TR72-4ColorD-P-Finish 72" 4 B, G, W BK, BZ, SN, WT
TR Series Angle Power Strip
PART NUMBER DIMENSIONS DESCRIPTION
TR-SQ-JB-P-Finish 3" x 3" x 2-1/8" Square Junction Box
2-1/8"
7/8"
2-1/4"
2-1/2"
Black (B) Gray (G) White (W)
White (WT)Satin Nickel (SN)Bronze (BZ)Black (BK)
800.445.6404 • TaskLighting.com4 TR-SPEC-0618
• Receptacles must be a minimum of 5" apart (on center)
• Receptacles must be a minimum of 3" from the end
• Custom charges will apply, call for a quote and assistance with your custom order
• Call for lead time
= Knock-out (all knock-outs are 1-1/2" from end)
= Receptacle (15A receptacle standard)
Custom Options
Custom Option Details
• Custom lengths from 7" - 92" (sizes over 92" will have a seam when assembled)
• Additional devices (see page 5)
• Custom device placement
Legend
42"
48"
TR24-2ColorD-Finish
TR12-1ColorD-Finish
TR9-1ColorD-Finish
18"
TR18-2ColorD-Finish
12"
9"
24"
30"
TR30-2ColorD-Finish
36"
TR36-2ColorD-Finish
TR42-3ColorD-Finish
TR48-3ColorD-Finish
60"
TR60-4ColorD-Finish
72"
TR72-4ColorD-Finish
1-1/2"
12" 12"
12" 12"
6"
12"12" 12 "
12"12 "
10" 11" 10"11"
12" 12" 12"
10" 10" 10"
7-1/2" 9" 7-1/2"
6" 6" 6"
6"
4-1/2"
14-1/4" 14-1/4" 14-1/4" 14-1/4" 14-1/4"
TR Series Angle Power StripTamper Resistant Duplex ReceptaclesInstalled view
1-1/2"
1-1/2" 1-1/2"
1-1/2" 1-1/2"
1-1/2" 1-1/2"
1-1/2" 1-1/2"
1-1/2" 1-1/2"
1-1/2" 1-1/2"
1-1/2" 1-1/2"
1-1/2" 1-1/2"
1-1/2" 1-1/2"
4-1/2"
800.445.6404 • TaskLighting.com 5TR-CUSTOM-0618
TR Series Angle Power StripCustom Options
TR Series Custom OptionsCUSTOM LENGTHSCustom lengths to the 1/4˝ from 7" - 92" (larger sizes will have a seam when assembled)
SWITCHESPART NUMBER DESCRIPTION COLORTRO-SPS-Color Decora single-pole rocker switch B, G, W
TRO-SPS-20A-Color Decora 20 Amp single-pole rocker switch B, G, W
TRO-3WS-Color Decora 3-way rocker switch B, G, W
TRO-3WS-20A-Color Decora 20 Amp 3-way rocker switch B, G, W
TRO-4WS-Color Decora 4-way rocker switch B, G, W
TRO-DS-2SPS-Color Decora double switch B, G, W
TRO-DS-(2)3WS-Color Double switch with (2) 3-way B, W
TRO-DS-1P/3P-Color Double switch with single-pole & 3-way B, G, W
TRO-TS-3SPS-Color Decora triple switch w/ three single-pole switches B, W
RECEPTACLESTRO-15A-REC 15 Amp tamper resistant receptacle B, G, W
TRO-20A-REC 20 Amp tamper resistant receptacle B, G, W
RECEPTACLES/SWITCH COMBOTRO-USB/REC Combination (2) USB ports and receptacle B, G, W
TRO-CB-1P/REC-Color Combination single-pole switch and receptacle B, G, W
TRO-CB-3P/REC-Color Combination 3-way switch & receptacle B, G, W
CONNECTORSTRO-CJ-Color Decora style Cable Jack, "F" Style, for 75 Ohm coaxial cable B, G, W
TRO-PJ-Color Decora style 6 conductor telephone jack B, G, W
TRO-HDMI-Color HDMI Port Connector W
PORT FRAMESTRO-2PORT-ColorTRO-3PORT-ColorTRO-4PORT-ColorTRO-6PORT-Color
Decora style multimedia insert. Allows you to combine your choice of 2, 3, 4, or 6 voice, data, audio, or video connectors into one compact, attractive wallplate
B, G, W
SNAP-IN CONNECTORS
TRO-CON-BLANK-Color Blank insert used to cover up any unused openings in any of the Port Frames B, G, W
TRO-CON-CAT6-Color Snap-in Data Category 6 8-conductor component-rated connector. 250 MHz B, G, W
TRO-CON-CJ-Color Snap-In cable jack. B, G, W
TRO-CON-PJ-8-Color 6-conductor USOC voice grade phone (jack) connector B, G, W
TRO-CON-HDMI-Color HDMI feed through Quick Port Connector B, W
POWER SUPPLIESTRO-TLD-D30WSO 15V DC 30W hardwire
TRO-TLD-D45WSO 15V DC 45W hardwire
TRO-TLD-D60WSO 15V DC 60W hardwire
TRO-TLD-D75WSO 15V DC 75W hardwire
TRO-LPV-20W-15V 15V DC 20 Watt LED power supply (use with wireless dimming system)
TRO-LPV-35W-15V 15V DC 35 Watt LED power supply (use with wireless dimming system)
TRO-3WS,TRO-4WS, TRO-SPS
TRO-DS-2SPS-W
TRO-CON-PJ TRO-CON-CAT6TRO-CON-CJ
Switches
Power Supply
TRO-2PORT, TRO-3PORT, TRO-4PORT & TRO-6PORT
TRO-PJ TRO-CJ
Snap-in Connectors
TRO-20A-RECTRO-15A-REC
Connectors
Port Frames
Combination Devices
TRO-USB/RECTRO-CB-IP/REC& TRO-CB-3P/REC
Receptacles
TRO-HDMI
TRO-TLD-D30WSOTRO-TLD-D45WSOTRO-TLD-D60WSOTRO-TLD-D75WSO
TRO-CON-HDMI
TRO-LPV
TRO-CON-BLANK
800.445.6404 • TaskLighting.com6
TR-USB Series Angle Power StripTamper Resistant Receptacles with USB included
Specifications
Features
• Kitchens• Baths• Offices & Computer Labs• Islands• Shops & Garages
Applications
Construction Materials: Powder Coated Aluminum
Input Voltage: 120V
Mounting: Wood Screws & Wall Anchors
Wiring: 12 ga. Romex
Environment: Dry Only
Optional Installation Components
TRU-SPEC-0618
Finish Options
Receptacle Colors
• Tamper Resistant• Easy Installation• Designer finishes to blend with any decor• 3-Year Limited Warranty
Section Drawing
Part Number Length# of USB/Recept. Combo
# of Duplex Recept.
Recept.Color Finish
TRU9-1ColorD-P-Finish 9" 1 B, G, W BK, BZ, SN, WT
TRU12-1ColorD-P-Finish 12" 1 B, G, W BK, BZ, SN, WT
TRU18-2ColorD-P-Finish 18" 1 1 B, G, W BK, BZ, SN, WT
TRU24-2ColorD-P-Finish 24" 1 1 B, G, W BK, BZ, SN, WT
TRU30-2ColorD-P-Finish 30" 1 1 B, G, W BK, BZ, SN, WT
TRU36-2ColorD-P-Finish 36" 1 1 B, G, W BK, BZ, SN, WT
TRU42-3ColorD-P-Finish 42" 1 2 B, G, W BK, BZ, SN, WT
TRU48-3ColorD-P-Finish 48" 1 2 B, G, W BK, BZ, SN, WT
TRU60-4ColorD-P-Finish 60" 1 3 B, G, W BK, BZ, SN, WT
TRU72-4ColorD-P-Finish 72" 1 3 B, G, W BK, BZ, SN, WT
USB device always positioned on left
PART NUMBER DIMENSIONS DESCRIPTION
TR-SQ-JB-P-Finish 3" x 3" x 2-1/8" Square Junction Box
2-1/8"
7/8"
2-1/4"
2-1/2"
USB/Receptacle Combo Colors
White (WT)Satin Nickel (SN)Bronze (BZ)Black (BK)
Black WhiteGray
Black WhiteGray
800.445.6404 • TaskLighting.com 7TRU-SPEC-0618
TR-USB Series Angle Power StripTamper Resistant Receptacles with USB includedInstalled view
= Knock-out (all knock-outs are 1-1/2" from end)
= Receptacle (15A receptacle standard)
Legend
= USB/ Receptacle Combo (15A receptacle standard)
42"
48"
TRU24-2ColorD-Finish
TRU12-1ColorD-Finish
TRU9-1ColorD-Finish
18"
TRU18-2ColorD-Finish
12"
9"
24"
30"
TRU30-2ColorD-Finish
36"
TRU36-2ColorD-Finish
TRU42-3ColorD-Finish
TRU48-3ColorD-Finish
60"
TRU60-4ColorD-Finish
72"
TRU72-4ColorD-Finish
12" 12"
12" 12"
6"
12"12" 12 "
12"12 "
10" 11" 10"11"
12" 12" 12"
10" 10" 10"
7-1/2" 9" 7-1/2"
6" 6" 6"
6"
4-1/4"
14-1/4" 14-1/4" 14-1/4" 14-1/4" 14-1/4"
1-1/2"1-1/2"
1-1/2" 1-1/2"
1-1/2" 1-1/2"
1-1/2" 1-1/2"
1-1/2" 1-1/2"
1-1/2" 1-1/2"
1-1/2" 1-1/2"
1-1/2" 1-1/2"
1-1/2" 1-1/2"
1-1/2" 1-1/2"
4-1/4"
800.445.6404 • TaskLighting.com8
1 2 3Secure APS – TR Series to wall with screws into each stud or use anchors provided. Strip wires and connect BLACK wire from romex to GOLD terminal and WHITE wire from romex to SILVER terminal. Ground all GREEN wires to PEM studs inside of back frame. When connecting two APS – TR Series, run Romex from piece A to piece B. Ground each section to the next.
TR-INSTALL-0618
Turn power off at panel. Carefully pry open each piece with tool (provided). Insert Romex connector into hole. Pull wires into APS-TR Series.
W2436 Valance
GFCI Turn power off!
To electrical panel
W1836 W2436
12-2 Romex
(Max. 15 Amps)
(Piece A)
(Max. 15 Amps)
(Piece B)
Angle Power Strip-TR SeriesWire Entry Wire Entry
Wire Entry12-2 Romex
1
1
2
33
Angle Power Strip-TR Series
To terminate last APS- TR Series, use wire nuts on ends of wires. Snap cover in place, and turn power on. Firmly insert plug straight into receptacle, applying equal pressure to both blades at the same time. Gently rock plug, if needed.
General Guidelines• Power source MUST be a 20 amp branch circuit protected by a GFCI at the panel or GFCI prior to the connection at APS.• All wiring must meet NEC® and local codes. The Angle Power Strip (APS) must be installed by a licensed electrician.• Firmly insert plug straight into receptacle, applying equal pressure to both blades at the same time. Gently rock plug, if needed.
TR/TR-USB Series Angle Power StripInstallation Instructions
800.445.6404 • TaskLighting.com 9
Specifications Optional Installation Components PART NUMBER DIMENSIONS DESCRIPTION
SQ-JB-Finish 3˝ x3˝ x 1-1/2˝ Square Junction Box
Section Drawing
Finish Options
Receptacle Colors• Kitchens• Baths• Offices & Computer Labs• Islands• Shops & Garages
Applications
APT-SPEC-0618
• Tamper Resistant• Easy Installation• Designer finishes to blend with any decor• 3-Year Limited Warranty
Features
Part Number Length # of Recept.
Recept.Color Finish
APT9-2Color-P-Finish-*Position 9" 2 B, G, W BK, BZ,SN, WT
APT12-2Color-P-Finish-*Position 12" 2 B, G, W BK, BZ,SN, WT
APT18-3Color-P-Finish-*Position 18" 3 B, G, W BK, BZ,SN, WT
APT24-4Color-P-Finish 24" 4 B, G, W BK, BZ,SN, WT
APT30-4Color-P-Finish 30" 4 B, G, W BK, BZ,SN, WT
APT36-4Color-P-Finish 36" 4 B, G, W BK, BZ,SN, WT
APT42-5Color-P-Finish 42" 5 B, G, W BK, BZ,SN, WT
APT48-5Color-P-Finish 48" 5 B, G, W BK, BZ,SN, WT
APT60-7Color-P-Finish 60" 7 B, G, W BK, BZ,SN, WT
APT72-8Color-P-Finish 72" 8 B, G, W BK, BZ,SN, WT
*Indicate Left (L) or Right (R) side wire entry
Construction Materials: Powder Coated Aluminum
Input Voltage: 120V
Mounting: Wood Screws & Wall Anchors
Wiring: 12 ga. Romex
Environment: Dry Only
1-1/2"
1-5/8"
1-11/16"
3/4"
APT Series Angle Power StripTamper Resistant Receptacles eliminate cutouts for receptacles and switches in your backsplash
White (WT)
Black (B) Gray (G) White (W)
Satin Nickel (SN)Bronze (BZ)Black (BK)
800.445.6404 • TaskLighting.com10
• Receptacles must be a minimum of 1-1/2" apart (on center)
• Receptacles must be a minimum of 1" from end. (Requires wire entry at opposite end of fixture)
• Custom charges will apply. Call for a quote and assistance with your custom order.
• Call for lead time
APT-SPEC-0618
= Knock-out (all knock-outs are 1-1/2" from end)
= Receptacle (Available in Black, Gray, or White)
Custom Options
Custom Option Details
• Custom lengths from 6" - 92" (larger sizes will have a seam when assembled)
• 120 Volt integral switch (available in black or white only)
• Additional receptacles
• Custom receptacle/switch placement
Legend
18"
12"
9"
24"
30"
36"
42"
48"
60"
72"8-1/4"7-1/8" 7-1/8"
1-1/2"
7-1/2"
7"8-1/2"7"
7"7" 7" 7" 7" 7"
7-1/8"5-1/4"
3-1/4" 7-1/8"
7" 3-1/2" 4"
7"2-1/2"
5" 2" 2"
APT Series Angle Power StripInstalled view
8-1/4"8-1/4"8-1/4"8-1/4"8-1/4"8-1/4"
7-1/2" 7-1/2" 7-1/2" 7-1/2" 7-1/2" 7-1/2"7-1/2"
8-1/2"8-1/2"8-1/2"
1-1/2"
1-1/2" 1-1/2"
1-1/2" 1-1/2"
1-1/2" 1-1/2"
1-1/2" 1-1/2"
1-1/2" 1-1/2"
1-1/2" 1-1/2"
1-1/2"
1-1/2"
1-1/2"
2-1/2"
3-1/2"
3-1/4"3-1/4"7-1/8"
5-1/4"5-1/4"7-1/8"
7-1/8"7-1/8" 7-1/4"7-1/4"7-1/4"
800.445.6404 • TaskLighting.com 11
APS
W2436 Valance
General Guidelines• Power source MUST be a 20 Amp branch circuit protected by a GFCI at the panel or GFCI prior to the connection at APS.• All wiring must meet NEC® and local codes. The Angle Power Strip (APS) must be installed by a licensed electrician.• Firmly insert plug straight into receptacle, applying equal pressure to both blades at the same time. Gently rock plug, if needed.
GFCI Turn power off!
To electrical panel
W1836 W2436
12-2 Romex
(Piece A)(Piece B)
APSWire Entry Wire Entry
Wire Entry12-2 Romex
1
1
2
33
APT-INSTALL-0618
Turn power off at panel. Carefully pry open each piece with tool (provided). Insert Romex connector into hole with locknut on back frame. Pull wires into APS.
Secure APS to wall with screws into studs or use anchors provided. Strip wires and connect BLACK to BLACK, WHITE to WHITE. Ground all GREEN wires to PEM studs inside of back frame. When connecting two APS, run Romex from fixture to fixture. Ground each section to the next.
1 2 To terminate last APS, use wire nuts on ends of wires. Snap cover in place and turn power on. Firmly insert plug straight into receptacle, applying equal pressure to both blades at the same time. Gently rock plug, if needed.
3
APT Series Angle Power StripInstallation Instructions
800.445.6404 • TaskLighting.com12
Lighted Power Strip DV SeriesSpecifications for LPS WITH Built-In Driver
PART NUMBER LENGTHTOTAL WATTS
#OF RECEPT.
RECEPT. COLOR FINISH KELVIN TEMP
LUMENSBased on 3000K
(approx. per fixture)*
LPS10QDV2ColorFinishTemp 10-1/2" 2W 1 B, G, W BK, BZ, SN, WT 27K, 30K, 40K, 50K 207
LPS12QDV4ColorFinishTemp 12-1/2" 4W 2 B, G, W BK, BZ, SN, WT 27K, 30K, 40K, 50K 414
LPS18QDV6ColorFinishTemp 18-1/2" 6W 2 B, G, W BK, BZ, SN, WT 27K, 30K, 40K, 50K 621
LPS24QDV8ColorFinishTemp 24-1/2" 8W 4 B, G, W BK, BZ, SN, WT 27K, 30K, 40K, 50K 828
LPS30QDV10ColorFinishTemp 30-1/2" 10W 4 B, G, W BK, BZ, SN, WT 27K, 30K, 40K, 50K 1035
LPS36QDV12ColorFinishTemp 36-1/2" 12W 4 B, G, W BK, BZ, SN, WT 27K, 30K, 40K, 50K 1242
S-LPS-DVSERIES-SPEC-0618
Specifications WITH BUILT-IN DRIVER
Finish Options
Receptacle Colors
• Under Cabinets• Under Fixed Shelving• Office Cubicles• Shops & Garages
Applications• Medium Light Output - 1/4 Watt LEDS• INTEGRAL DRIVER• Tamper Resistant APS with integrated LED Lighting• Rocker Switch• 3-Year Limited Warranty• Dimmable with separate lighting circuit• No UV or IR
Features
Construction Materials:
Powder Coated Extruded Aluminum (heatsink), IR Acrylic (lens)
Wattage: 1/4 Watt LEDs
Color Temp (Kelvin): 2700K (Warm White), 3000K (Soft White)4000K (Cool White), 5000K (Daylight White)
CRI: 90+
LED Beam Angle: 120º
LED Spacing: 1-1/2"
LED Board: 6" or 12"
Input Voltage: 120V
Mounting: Wood Screws & Wall Anchors
Wiring: 12 ga.Romex
Environment: Dry Only
24-1/2” fixture shown
2-5/8"
3/8"
1-5/8"
1-5/8"
1"
Fixture Section
Medium Light Output - 1/4 watt
Dimming OptionsPART NUMBER DESCRIPTIONDVELV-300P 300W Diva slide dimmer
DVELV-303P 300W Diva slide dimmer 3-way
MAELV-600-Color Maestro electronic smart dimmer
MA-R-Color Maestro companion dimmer
White (WT)Satin Nickel (SN)Bronze (BZ)Black (BK)
Black (B) Gray (G) White (W)
800.445.6404 • TaskLighting.com 13
1-1/2"
S-LPS-DVSERIES-SPEC-0618
Lighted Power Strip DV SeriesSpecifications for LPS WITH Built-In DriverInstalled view
WITH Built-In Driver and Switch - Medium Light Output -1/4 Watt
= Knock-out (1-1/2" from right side - 5-1/2" from left side) located on back frame
Legend
= Receptacle (Available in White, Gray, and Black)
= Switch (Available in Black or White- 4-1/2" from left side)
= Divider Plate (Low Voltage)
= Driver
3-1/2"
4-1/2"
Back Frame
Cover
NOTE: 6"LED board is mounted in center of 10-1/2" fixture
LPS24DV8ColorFinishTemp
LPS12DV4ColorFinishTemp
LPS10DV2ColorFinishTemp
18-1/2"3" 5"10-1/2"
LPS18DV6ColorFinishTemp
1"
12-1/2"10"
1"
10-1/2"9-1/2"
24-1/2"10-1/2" 3"3" 3" 5"
30-1/2"11" 6"4-1/2"
LPS30DV10ColorFinishTemp
36-1/2"5-1/2"
LPS36DV12ColorFinishTemp12-1/2" 6" 6"6"6"
Divider Plate
DRIVER
1-1/2"5-1/2"
1-1/2"5-1/2"
1-1/2"5-1/2"
5-1/2"
5-1/2"
1-1/2"
4-1/2"4-1/2"
800.445.6404 • TaskLighting.com14 S-LPS-DVSERIES-INSTALL-0618
Lighted Power Strip DV SeriesInstallation Instructions for LPS WITH Built-In Driver
Turn power off at panel. Carefully pry open each piece with tool (provided). Insert Romex connector into knockout hole inside of back frame. Pull wires into LPS.
Tool
WTWTGRN
BKBK
120VDIVIDER PLATE
SWITCH
DRIVER
RED +BLUE -
WT
WTWT GRN
GRN
GRN
BK
BK
BK
General Guidelines• Power source MUST be a 20 amp branch circuit protected by a GFCI at the panel or GFCI prior to the connection at LPS.• All wiring must meet NEC® and local codes. • Light valance recommended.• Firmly insert plug straight into receptacle, applying equal pressure to both blades at the same time. Gently rock plug, if needed.
WTWTGRN
BKBK
120VDIVIDER PLATE
SWITCH
DRIVER
RED +BLUE -
WTWT GRN
GRN
BKBK
FactoryWired
FactoryWired
Secure LPS to wall by screwing into wall studs or use anchors provided. Connect BLACK Romex wire to BLACK wire from receptacles and switch. Connect WHITE Romex wire to WHITE wire from receptacles and driver. Ground all GREEN wires to PEM studs inside of back frame.
Wiring for Combined Light and Receptacle Circuit - Non Dimmable
To terminate last LPS, use wire nuts on ends of wires.
When connecting 2 or more LPS fixtures, run Romex from fixture to fixture. Ground each section to the next.
Snap cover in place and turn power on.
Secure LPS to wall by screwing into wall studs or use anchors provided. If running two circuits, one for receptacles, one for lighting, connect fixture wires to appropriate Romex wires. BLACK to BLACK. WHITE to WHITE. Ground all GREEN wires to PEM studs inside of back frame.
Wiring for Separate Light and Receptacle Circuits
Bottom of Cabinet
Step 1 Step 2
Step 3
Step 4
To terminate last LPS, use wire nuts on ends of wires.
When connecting 2 or more LPS fixtures, run Romex from fixture to fixture. Ground each section to the next.
Snap cover in place and turn power on.
Step 2
Step 3
Step 4
Step 1
12-1/2” Fixture Shown
12-1/2” Fixture Shown120V for receptacles
120Vfor lights
800.445.6404 • TaskLighting.com 15S-LPS-DVSERIES-INSTALL-0618
120V ReceptacleCircuit. Must beGFCI Protected. (non dimmable)
Lighting Circuit
Back Frame
Positive (+)
Negative (-)
Wiring Diagram for Separate Light & Receptacle Circuits
Back Frame
Cover
Positive (+)Negative (-)
Wiring Diagram for Combined Light & Receptacle Circuit - Non Dimmable
Cover
18-1/2” Fixture Shown
18-1/2” Fixture Shown
Divider Plate
Divider Plate
DRIVER
DRIVER
120V ReceptacleCircuit. Must beGFCI Protected.
Lighted Power Strip DV SeriesWiring Diagram for 18-1/2" LPS WITH Built-In Driver
800.445.6404 • TaskLighting.com16
Lighted Power Strip RM SeriesSpecifications for LPS WITHOUT Built-In Driver
S-LPS-RMSERIES-SPEC-0618
Construction Materials:
Powder Coated Extruded Aluminum (heatsink), IR Acrylic (lens)
Wattage: 1/2 Watt LEDs
Color Temp (Kelvin): 2700K (Warm White), 3000K (Soft White)4000K (Cool White), 5000K (Daylight White)
CRI: 90+LED Beam Angle: 120ºLED Spacing: 1-1/2"LED Board: 6" or 12"Input Voltage: 120V (receptacles) & 15 Volt DC (lighting)Mounting: Wood Screws & Wall Anchors
Wiring: 18/2 solid (recommended)- for Lighting 12 ga. Romex- for Receptacle
Environment: Dry OnlyMax Run: Refer to Driver Specs
Optional Installation Components PART NUMBER DESCRIPTIONAPS-Switch Rocker Switch (available in Black or White)
APT-R-15A 15Amp Tamper Resistant Receptacle. Available in Black, Gray, and White
Task Lighting retains the right to modify the design of our products without prior notice
PART NUMBER DESCRIPTION/ OUTPUT INPUTTLD-D30WSO 30W hardwire 15V DC, 2A max. 120V AC, .3ATLD-D45WSO 45W hardwire 15V DC, 3A max. 120V AC, .4ATLD-D60WSO 60W hardwire 15V DC, 4A max. 120V AC, .5ATLD-D75WSO 75W hardwire 15V DC, 5A max. 120V AC, .6A
PART NUMBER LENGTHTOTAL WATTS
#OF RECEPT.
RECEPT. COLOR FINISH
KELVIN TEMP
LUMENSBased on 3000K
(approx. per fixture)*
LPS10HRM3ColorFinishTemp 10-1/2" 3W 1 B, G, W BK, BZ, SN, WT 27K, 30K, 40K, 50K 270
LPS12HRM6ColorFinishTemp 12-1/2" 6W 2 B, G, W BK, BZ, SN, WT 27K, 30K, 40K, 50K 540
LPS18HRM9ColorFinishTemp 18-1/2" 9W 2 B, G, W BK, BZ, SN, WT 27K, 30K, 40K, 50K 810
LPS24HRM12ColorFinishTemp 24-1/2" 12W 4 B, G, W BK, BZ, SN, WT 27K, 30K, 40K, 50K 1080
LPS30HRM15ColorFinishTemp 30-1/2" 15W 4 B, G, W BK, BZ, SN, WT 27K, 30K, 40K, 50K 1350
LPS36HRM18ColorFinishTemp 36-1/2" 18W 4 B, G, W BK, BZ, SN, WT 27K, 30K, 40K, 50K 1620
LPS42HRM21ColorFinishTemp 42-1/2" 21W 5 B, G, W BK, BZ, SN, WT 27K, 30K, 40K, 50K 1890
LPS48HRM24ColorFinishTemp 48-1/2" 24W 5 B, G, W BK, BZ, SN, WT 27K, 30K, 40K, 50K 2160
LPS60HRM30ColorFinishTemp 60-1/2" 30W 7 B, G, W BK, BZ, SN, WT 27K, 30K, 40K, 50K 2700
LPS72HRM36ColorFinishTemp 72-1/2" 36W 8 B, G, W BK, BZ, SN, WT 27K, 30K, 40K, 50K 3240
White (WT)
Finish Options
Satin Nickel (SN)Bronze (BZ)Black (BK)
Receptacle Colors
• Under Cabinets • Office Cubicles• Under Fixed Shelving • Shops & Garages
ApplicationsFeatures
24-1/2” fixture shown
Black (B) Gray (G) White (W)
2-5/8"
1/2"
1-5/8"
1-5/8"
1"
Fixture Section
Specifications WITHOUT DRIVER
Power Supplies
• High Light Output - 1/2 Watt LEDs• REMOTE DRIVER• Tamper Resistant APS with integrated LED Lighting• 3-Year Limited Warranty• Dimmable (with compatible dimmer)• No UV or IR
High Light Output - 1/2 watt
Dimming OptionsPART NUMBER DESCRIPTIONDVELV-300P 300W Diva slide dimmer
DVELV-303P 300W Diva slide dimmer 3-way
MAELV-600-Color Maestro electronic smart dimmer
MA-R-Color Maestro companion dimmer
**WS-LED-CVD-902 Sempria dimming module for wireless system
*WS-SR-Color-902Sempria wireless dimmer/ switch. Available in Black, Gray, Ivory, Light Almond, and White**NOTE: Call TASK for alternate driver
800.445.6404 • TaskLighting.com 17S-LPS-RMSERIES-SPEC-0618
Lighted Power Strip RM SeriesSpecifications for LPS WITHOUT Built-In DriverInstalled view
Custom Options/Details
Legend
= Low Voltage Entry (1-1/2" from left side) located on back frame
= Receptacle (Available in WT, GR, or BK)
= Divider Plate (Low Voltage)
• Custom lengths from 10-1/2" - 72-1/2" (larger sizes will have a seam when assembled)
• 120 Volt integral switch (available in black or white only)
• Custom receptacle/switch placement• Receptacles must be a minimum of
1-1/2” apart (on center)
• Receptacles must be a minimum of 1” from right side & 5-1/2” from left side. Knockout cannot be behind device.
• Custom charges will apply - Call for a quote, lead time, and assistance with your custom order
= Knock-out (1-1/2" from right side - 5-1/2" from left side). located on back frame
Back Frame
Cover
1½"
NOTE: 6"LED board is mounted in center of 10-1/2" fixture
LPS24RM12ColorFinishTemp
LPS12RM6ColorFinishTemp
LPS10RM3ColorFinishTemp
18-1/2"3" 5"10-1/2"
LPS18RM9ColorFinishTemp
1"
12-1/2"10"
1"
10-1/2"9-1/2"
24-1/2"10-1/2" 3"3" 3" 5"
30-1/2"4-1/2"11" 6"
LPS30RM15ColorFinishTemp
36-1/2"
LPS36RM18ColorFinishTemp12-1/2" 6" 6"6"6"
42-1/2"
LPS42RM21ColorFinishTemp
48-1/2"
LPS48RM24ColorFinishTemp
60-1/2"
LPS60RM30ColorFinishTemp
72-1/2"
10-3/4" 6-3/4"
11-1/2" 9"7"7"7"7"
7"7"7"7" 7"7"11-1/2" 7"
12" 8"
5-1/2"
Divider Plate
1-1/2"
5-1/2"
5-1/2"
5-1/2"
5-1/2"
5-1/2"
5-1/2"
5-1/2"
5-1/2"
5-1/2"
1-1/2"
1-1/2"
1-1/2"
1-1/2"
1-1/2"
1-1/2"
1-1/2"
7-1/2"7-1/2" 7-1/2" 7-1/2"7-1/2"7-1/2"7-1/2"LPS72RM36ColorFinishTemp
6-1/4"6-1/4"6-1/4"6-1/4"
4-1/2" 4-1/2"
1-1/2"
800.445.6404 • TaskLighting.com18
Lighted Power Strip RM SeriesInstallation Instructions for LPS WITHOUT Built-In Driver
S-LPS-RMSERIES-INSTALL-0618
Using appropriate knockout hole, pull low voltage wire from remote power supply into the low voltage space, connect BLACK wire (negative) to BLACK wire from lights and RED wire (positive) to RED wire.
Snap cover in place and turn power on.
Turn power off at panel. Carefully pry open each piece with tool (provided). Insert Romex connector into knockout hole inside of back frame. Pull wires into LPS.
General Guidelines• Power source MUST be a 20 amp branch circuit protected by a GFCI at the panel or GFCI prior to the connection at LPS.• All wiring must meet NEC® and local codes. • Light valance recommended.• Firmly insert plug straight into receptacle, applying equal pressure to both blades at the same time. Gently rock plug, if needed.
Secure LPS to wall by screwing into wall studs or use anchors provided. Connect BLACK to BLACK, WHITE to WHITE. Ground all GREEN wires to PEM studs inside of back frame.
Bottom of Cabinet
Remote Driver- 120V Entry
12-1/2” Fixture Shown
GRNGRNGRN
GRN
BK
WT
BK
WT
BK
120VDIVIDER PLATELOW VOLTAGE
RED +
BLACK -
WT
When connecting two LPS, run Romex from fixture to fixture. Ground each section to the next.
Remote Driver-Low Voltage Entry
To terminate last LPS, use wire nuts on ends of wires.
Tool
18-1/2” Fixture Shown
Step 2
Step 3
Step 4Step 1
Step 5
15vDC wire
120V Circuit
Positive (+)Negative (-)
Back Frame
Cover
Divider Plate
19800.445.6404 • TaskLighting.com
White (W)Gray (G)Black (B)
SG9-SPEC-0618
SG9 SeriesLinear under cabinet LED Lighting with integrated WireWay system for concealed wire management
• Wire management system• Conceals wire from wall to fixture• Available in Black, Gray, and White
PART NUMBER DESCRIPTION/ OUTPUT INPUTTLD-24WSI* 24W plug in 15V DC Plug In
TLD-D30WSO 30W hardwire 15V DC, 2A max. 120V AC, .3ATLD-D45WSO 45W hardwire 15V DC, 3A max. 120V AC, .4ATLD-D60WSO 60W hardwire 15V DC, 4A max. 120V AC, .5ATLD-D75WSO 75W hardwire 15V DC, 5A max. 120V AC, .6A
PART NUMBER DIMENSIONS TOTAL WATTS
KELVINTEMP
LUMENSBased on 3000K
(approx. per fixture)*
SG9-6UC3-MountColor-Temp 6" x 1-1/4" x 1/2" 3W 27K, 30K40K, 50K 270
SG9-12UC6-MountColor-Temp 12" x 1-1/4" x 1/2" 6W 27K, 30K40K, 50K 540
SG9-18UC9-MountColor-Temp 17-7/8" x 1-1/4" x 1/2" 9W 27K, 30K40K, 50K 810
SG9-24UC12-MountColor-Temp 23-7/8" x 1-1/4" x 1/2" 12W 27K, 30K40K, 50K 1080
SG9-30UC15-MountColor-Temp 29-3/4" x 1-1/4" x 1/2" 15W 27K, 30K40K, 50K 1350
SG9-36UC18-MountColor-Temp 35-3/4" x 1-1/4" x 1/2" 18W 27K, 30K40K, 50K 1620
SG9-42UC21-MountColor-Temp 41-3/4" x 1-1/4" x 1/2" 21W 27K, 30K40K, 50K 1890
SG9-48UC24-MountColor-Temp 47-3/4" x 1-1/4" x 1/2" 24W 27K, 30K40K, 50K 2160
Installation Components
1 ¼"
WireWay Section
PART NUMBER DESCRIPTIONSP-20FT-18/2 20 foot spool of 18/2 awg solid wire
SP-50FT-18/2 50 foot spool of 18/2 awg solid wire
SG9-WW-48-Color 48" Field Cuttable WireWay
SG9-WW-MJ12-Color Miter joint - 45º cuts (2) 12-inch pieces
SG9-IL-CONN In-line Connector
• 50,000 hour LED life at 70% lumen maintenance• Concealed wire management with hidden
poke-home connectors• Frosted, light-diffusing lens• Streamlined from WireWay to light• 3-year limited warranty • No UV or IR• Dimmable (with compatible dimmer)
Features
• Under Cabinet Lighting• Cove Lighting• Display Lighting
Applications
Construction Materials:
RPVC (mount), extruded aluminum (heatsink), IR Acrylic (lens)
Wattage: 1/2 Watt LEDs
Color Temp (Kelvin): 2700K (Warm White), 3000K (Soft White)4000K (Cool White), 5000K (Daylight White)
CRI: 90+
LED Beam Angle: 120º
LED Spacing: 1-1/2"
LED Board: 6" or 12"
Input Voltage: 15 Volt DC
Mounting: Screws (included)
Max Run: Refer to driver specs
Wiring: 18/2 solid (recommended)
Environment: Dry and damp locationsTask Light ing retains the r ight to modify the design of our products without pr ior not ice
Mounting Bracket Colors
Specifications
1/2"
1-1/4"Fixture Section
1/2"
1-1/4"
Power Supplies
*Call for dimming options
High Light Output - 1/2 watt
WireWay Colors
Dimming OptionsPART NUMBER DESCRIPTIONDVELV-300P 300W Diva slide dimmer
DVELV-303P 300W Diva slide dimmer 3-way
MAELV-600-Color Maestro electronic smart dimmer
MA-R-Color Maestro companion dimmer
*WS-LED-CVD-902 Sempria dimming module for wireless system
*WS-SR-Color-902Sempria wireless dimmer/ switch. Available in Black, Gray, Ivory, Light Almond, and White**NOTE: Call TASK for alternate driver
20 800.445.6404 • TaskLighting.com
PRE-WIRINGRun separate wire from Driver (15 Volt DC) location to each zone. When total wattage of Sempria® LED fixtures in zone exceeds 75 Watts, use a second driver and run additional 18/2 solid wire for another zone. Length of wire from driver to first fixture in each zone is not to exceed 30 feet. Wiring may start at either end of fixture. (Option: separate wire may be run from driver to each fixture.)
DRIVER (15 Volt DC) LOCATIONS • Some Drivers may be conveniently concealed within our TR Series Angle Power Strip or Lighted Power Strip. • A sink base or the top of a cabinet are other common driver locations. • Driver must be accessible. • DO NOT LOCATE DRIVER IN ATTIC.
GENERAL GUIDELINES • A 15 VOLT DC DRIVER MUST BE USED WITH SEMPRIA® FIXTURES! Driver must be 15 Volt DC supplied by Task Lighting only!*
• All wiring must meet NEC® or local codes.
• 18/2 solid wire is recommended from driver to fixtures and between fixtures. (If 18/2 solid wire is not available, 18/2 stranded wire may also be used. Tin ends of wire if possible.)
• A maximum of 75 Watts of Sempria® LED Lighting is allowed on a zone.
• Limit wire length to 30 feet from driver to lights.
• Place switches on the 120 Volt side of the Driver (15 Volt DC).
• De-burr all cut WireWay edges to ensure wire safety.
• If other than Task specified dimmers are desired, call Task Lighting for instructions.
• Improper installation or applying improper voltage to fixture will void warranty. See TaskLighting.com for full warranty info.
light
WireWay
SG9-INSTALL-0618
1 ¼"
WireWay Section
1/2"
1-1/4"Fixture Section
1/2"
1-1/4”
SG9 SeriesInstallation Instructions
21800.445.6404 • TaskLighting.com
1. Cut SG9-WW WireWay Base the length from wire entry location (at back of cabinet) to the front of cabinet. Miter the corner or use SG9-WW-MJ12 (12” miter piece) to turn the corner. Deburr all cut edges to ensure wire safety.
2. Cut WireWay Base to fit full length of cabinet face. Deburr cut edges. Using screws provided, secure Base to bottom of cabinet every 12”. (When wiring between adjacent cabinets, drill 1/4” hole through end panels.)
3. Strip 1/4” insulation from driver wires. Push RED solid wire straight into terminal block with RED mark. Push BLACK solid wire straight into terminal block with BLACK mark. (18/2 solid wire is recommended. If using 18/2 stranded wire, ends must be tinned. Depress terminal block tab with ball point pen and insert wire.)
4. Cut wire to fit between adjacent fixtures. Insert wires into terminal blocks, maintaining polarity (RED wire to RED terminal, BLACK wire to BLACK terminal.) Maintain polarity or fixtures will not work.
5. Snap lens onto fixture. Position fixture in center of cabinet and snap into WireWay Base.
6. Cut WireWay Cover (or miter piece) to fit exposed Base. Deburr cut WireWay edges. Snap into Base.
OPTION: Installing Sempria® Fixtures Without WireWay
SG9-INSTALL-0618
Use mounting channel supplies with fixture. Use screws provided to secure mounting channel to underside at face of cabinet. Follow step 3 instructions. Position fixture in channel and snap into place.
SG9 SeriesInstallation Instructions
22 800.445.6404 • TaskLighting.com
A SeriesLinear LED fixture with Angled Housing and a slim profile for multiple applications
PART NUMBER DIMENSIONS
TOTAL WATTS
KELVIN TEMP
LUMENSBased on 3000K
(approx. per fixture)*
FLAT HOUSING ⅛ WATTSA9Q-6UN2-Temp 6-1/2" x 1/2" x 5/8" 2W 27K, 30K
40K, 50K 207
SA9Q-12UN4-Temp 12-1/2" x 1/2" x 5/8" 4W 27K, 30K40K, 50K 414
SA9Q-18UN6-Temp 18-1/2" x 1/2" x 5/8" 6W 27K, 30K40K, 50K 621
SA9Q-24UN8-Temp 24-1/2" x 1/2" x 5/8" 8W 27K, 30K40K, 50K 828
SA9Q-30UN10-Temp 30-1/2" x 1/2" x 5/8" 10W 27K, 30K40K, 50K 1035
SA9Q-36UN12-Temp 36-1/2" x 1/2" x 5/8" 12W 27K, 30K40K, 50K 1242
SA9Q-42UN14-Temp 42-1/2" x 1/2" x 5/8" 14W 27K, 30K40K, 50K 1449
SA9Q-48UN16-Temp 48-1/2" x 1/2" x 5/8" 16W 27K, 30K40K, 50K 1656
SA9E-6UN1-Temp 6-1/2" x 1/2" x 5/8" 1W 27K, 30K40K, 50K 87
SA9E-12UN2-Temp 12-1/2" x 1/2" x 5/8" 2W 27K, 30K40K, 50K 174
SA9E-18UN3-Temp 18-1/2" x 1/2" x 5/8" 3W 27K, 30K40K, 50K 261
SA9E-24UN4-Temp 24-1/2" x 1/2" x 5/8" 4W 27K, 30K40K, 50K 348
SA9E-30UN5-Temp 30-1/2" x 1/2" x 5/8" 5W 27K, 30K40K, 50K 435
SA9E-36UN6-Temp 36-1/2" x 1/2" x 5/8" 6W 27K, 30K40K, 50K 522
SA9E-42UN7-Temp 42-1/2" x 1/2" x 5/8" 7W 27K, 30K40K, 50K 609
SA9E-48UN8-Temp 48-1/2" x 1/2" x 5/8" 8W 27K, 30K40K, 50K 696
• Toe/Soffit Lighting• Cove Lighting• Interior Cabinet Lighting• Display Case Lighting
• 50,000 hour LED life at 70% lumen maintenance• Compact and versatile• Frosted lens• Poke-home connectors for easy installation• 3 Year limited warranty• No special gap-connectors needed• No UV or IR• Dimmable (with compatible dimmer)
S-A-SERIES-SPEC-0618
Task Lighting retains the right to modify the design of our products without prior notice
Installation Components PART NUMBER DESCRIPTIONSP-20FT-18/2 20 foot spool of 18/2 awg solid wire
SP-50FT-18/2 50 foot spool of 18/2 awg solid wire
SF9-WW-48 48" Sempria® LED Universal WireWayfor FLAT HOUSING
SG9-IL-CONN In-line Connector
Applications
Features
Construction Materials: Extruded aluminum (heatsink), IR Acrylic (lens)
Wattage: 1/8 and 1/4 Watt LEDs
Color Temp (Kelvin): 2700K (Warm White), 3000K (Soft White)4000K (Cool White), 5000K (Daylight White)
CRI: 90+
LED Beam Angle: 120º
LED Spacing: 1-1/2"
LED Board: 6" or 12"
Input Voltage: 15 Volt DC
Mounting: Double Stick Tape / Screws included
Max Run: Refer to driver specs
Wiring: 18/2 solid (recommended)
Environment: Dry and damp locations
Specifications
Power Supplies PART NUMBER DESCRIPTION/ OUTPUT INPUTTLD-24WSI* 24W plug in 15V DC Plug In
TLD-D30WSO 30W hardwire 15V DC, 2A max. 120V AC, .3ATLD-D45WSO 45W hardwire 15V DC, 3A max. 120V AC, .4ATLD-D60WSO 60W hardwire 15V DC, 4A max. 120V AC, .5ATLD-D75WSO 75W hardwire 15V DC, 5A max. 120V AC, .6A*Call for dimming options
Angled Housing
Medium Light Output - 1/4 watt
Dimming OptionsPART NUMBER DESCRIPTIONDVELV-300P 300W Diva slide dimmer
DVELV-303P 300W Diva slide dimmer 3-way
MAELV-600-Color Maestro electronic smart dimmer
MA-R-Color Maestro companion dimmer
*WS-LED-CVD-902 Sempria dimming module for wireless system
*WS-SR-Color-902Sempria wireless dimmer/ switch. Available in Black, Gray, Ivory, Light Almond, and White**NOTE: Call TASK for alternate driver
Low Light Output - 1/8 wattsection
5/8"
1/2"
1/2"
23800.445.6404 • TaskLighting.com
F SeriesLinear LED fixture with Flat Housing and a slim profile for multiple applications
PART NUMBER DESCRIPTION/ OUTPUT INPUTTLD-24WSI* 24W plug in 15V DC Plug In
TLD-D30WSO 30W hardwire 15V DC, 2A max. 120V AC, .3ATLD-D45WSO 45W hardwire 15V DC, 3A max. 120V AC, .4ATLD-D60WSO 60W hardwire 15V DC, 4A max. 120V AC, .5ATLD-D75WSO 75W hardwire 15V DC, 5A max. 120V AC, .6A
PART NUMBER DIMENSIONS
TOTAL WATTS
KELVIN TEMP
LUMENSBased on 3000K
(approx. per fixture)*
SF9Q-6UN2-Temp 6-1/2" x 1/2" x 1/2" 2W 27K, 30K40K, 50K 207
SF9Q-12UN4-Temp 12-1/2" x 1/2" x 1/2" 4W 27K, 30K40K, 50K 414
SF9Q-18UN6-Temp 18-1/2" x 1/2" x 1/2" 6W 27K, 30K40K, 50K 621
SF9Q-24UN8-Temp 24-1/2" x 1/2" x 1/2" 8W 27K, 30K40K, 50K 828
SF9Q-30UN10-Temp 30-1/2" x 1/2" x 1/2" 10W 27K, 30K40K, 50K 1035
SF9Q-36UN12-Temp 36-1/2" x 1/2" x 1/2" 12W 27K, 30K40K, 50K 1242
SF9Q-42UN14-Temp 42-1/2" x 1/2" x 1/2" 14W 27K, 30K40K, 50K 1449
SF9Q-48UN16-Temp 48-1/2" x 1/2" x 1/2" 16W 27K, 30K40K, 50K 1656
SF9E-6UN1-Temp 6-1/2" x 1/2" x 1/2" 1W 27K, 30K40K, 50K 87
SF9E-12UN2-Temp 12-1/2" x 1/2" x 1/2" 2W 27K, 30K40K, 50K 174
SF9E-18UN3-Temp 18-1/2" x 1/2" x 1/2" 3W 27K, 30K40K, 50K 261
SF9E-24UN4-Temp 24-1/2" x 1/2" x 1/2" 4W 27K, 30K40K, 50K 348
SF9E-30UN5-Temp 30-1/2" x 1/2" x 1/2" 5W 27K, 30K40K, 50K 435
SF9E-36UN6-Temp 36-1/2" x 1/2" x 1/2" 6W 27K, 30K40K, 50K 522
SF9E-42UN7-Temp 42-1/2" x 1/2" x 1/2" 7W 27K, 30K40K, 50K 609
SF9E-48UN8-Temp 48-1/2" x 1/2" x 1/2" 8W 27K, 30K40K, 50K 696
• Toe/Soffit Lighting• Cove Lighting• Interior Cabinet Lighting• Under Cabinet Lighting• Display Case Lighting
Applications
• 50,000 hour LED life at 70% lumen maintenance• Compact and versatile• Frosted lens• Poke-home connectors for easy installation• 3 Year limited warranty• No special gap-connectors needed• No UV or IR• Dimmable (with compatible dimmer)
Features
S-F-SERIES-SPEC-0618
Task Lighting retains the right to modify the design of our products without prior notice
Installation Components PART NUMBER DESCRIPTIONSP-20FT-18/2 20 foot spool of 18/2 awg solid wire
SP-50FT-18/2 50 foot spool of 18/2 awg solid wire
SF9-WW-48 48" Sempria® LED Universal WireWayfor FLAT HOUSING
SG9-IL-CONN In-line Connector
Construction Materials: Extruded aluminum (heatsink), IR Acrylic (lens)
Wattage: 1/8 and 1/4 Watt LEDs
Color Temp (Kelvin): 2700K (Warm White), 3000K (Soft White)4000K (Cool White), 5000K (Daylight White)
CRI: 90+
LED Beam Angle: 120º
LED Spacing: 1-1/2"
LED Board: 6" or 12"
Input Voltage: 15 Volt DC
Mounting: Double Stick Tape / Screws included
Max Run: Refer to driver specs
Wiring: 18/2 solid (recommended)
Environment: Dry and damp locations
Specifications
Power Supplies
*Call for dimming options
Flat Housing
Medium Light Output - 1/4 watt
Low Light Output - 1/8 watt
Dimming OptionsPART NUMBER DESCRIPTIONDVELV-300P 300W Diva slide dimmer
DVELV-303P 300W Diva slide dimmer 3-way
MAELV-600-Color Maestro electronic smart dimmer
MA-R-Color Maestro companion dimmer
*WS-LED-CVD-902 Sempria dimming module for wireless system
*WS-SR-Color-902Sempria wireless dimmer/ switch. Available in Black, Gray, Ivory, Light Almond, and White**NOTE: Call TASK for alternate driver
section
3/8"
1/2"
1/2"
24 800.445.6404 • TaskLighting.com
PRE-WIRINGRun separate wire from Driver (15 Volt DC) location to each zone. When total wattage of Sempria® LED fixtures in zone exceeds 75 Watts, use a second driver and run additional 18/2 solid wire for additional zone. Length of wire from driver to first fixture in each zone is not to exceed 30 feet. Wiring may start at either end of fixture. (Option: separate wire may be run from driver to each fixture.)
• Some Drivers may be conveniently concealed within our TR Series Angle Power Strip or Lighted Power Strip.• A sink base or the top of a cabinet are other common driver locations.• Driver must be accessible.• DO NOT LOCATE DRIVER IN ATTIC.
• A 15 VOLT DC DRIVER MUST BE USED! Driver must be 15 volt DC supplied by Task Lighting only!*
• All wiring must meet NEC® or local codes.
• 18/2 solid wire is recommended from driver to fixtures and between fixtures. (If 18/2 solid wire is not available, 18/2 stranded wire may also be used. Tin ends of wire if possible.)
• A maximum of 75 Watts of Sempria® LED Lighting is allowed on a zone.
• Limit wire length to 30 feet from driver to lights.
• Place switches on the 120 Volt side of the Driver.
• De-burr all WireWay edges to ensure wire safety.
• If other than Task specified dimmers are desired, call Task Lighting for instructions.
• Improper installation or applying improper voltage to fixture will void warranty. See TaskLighting.com for full warranty info.
GENERAL GUIDELINES
S-A&F-SERIES-INSTALL-0618
DRIVER (15 volt DC) LOCATIONS
section
3/8"
1/2"
1/2"
section
5/8"1/2"
1/2"
A & F SeriesInstallation Instructions
25800.445.6404 • TaskLighting.com
DD
$
Driver #1
15vDC
120V Switch
Driver #2
Start both sets of wires from drivers at a common point and wire the zones in opposite directions.
NOTE:If using stranded wire we recommend tinning the end of the wire first. If stranded wire is used without tinning, terminal block tabs must be depressed when inserting wires. Note that wiring with untinned stranded wire may result in a poor connection.
S-A&F-SERIES-INSTALL-0618
INSTALLING FIXTURES
1. Slide lens back to expose connectors or remove lens from fixture.
2. Strip 1/4" from RED wire and insert into terminal block opening with RED marking. Strip BLACK wire, insert into terminal block opening with BLACK mark. (If using 18/2 stranded wire, ends must be tinned. Depress terminal block tab with ball point pen and insert wire.)
3. Cut wires to fit between adjacent fixtures. Insert wires into terminal blocks, maintaining polarity (RED wire to RED terminal, BLACK wire to BLACK terminal.) MAINTAIN POLARITY OR THE FIXTURE WILL NOT WORK.
4. If fixture does not light, reverse wires.
5. Mounting surface must be finished and dust-free for mounting tape to properly adhere. Remove backing from mounting tape and press fixture firmly into place.
6. Using screws provided, secure fixture in place. DO NOT pierce LED strip with screws, nails, staples, or any other mechanical device.
7. Slide or snap lens back into place.
WHEN USING TWO DRIVERS:
A & F SeriesInstallation Instructions
26 800.445.6404 • TaskLighting.com
R SeriesLinear LED Recessed fixture
Low Light Output - 1/8 watt
PART NUMBER DIMENSIONSTOTAL WATTS
KELVIN TEMP
LUMENSBased on 3000K
(approx. per fixture)*
SR9E-8UN1-Temp 7-5/8" x 5/8" x 1/2" 1W 27K, 30K40K, 50K 87
SR9E-14UN2-Temp 13-5/8" x 5/8" x 1/2" 2W 27K, 30K40K, 50K 174
SR9E-20UN3-Temp 19-5/8" x 5/8" x 1/2" 3W 27K, 30K40K, 50K 261
SR9E-26UN4-Temp 25-5/8" x 5/8" x 1/2" 4W 27K, 30K40K, 50K 348
SR9E-32UN5-Temp 31-5/8" x 5/8" x 1/2" 5W 27K, 30K40K, 50K 435
SR9E-38UN6-Temp 37-5/8" x 5/8" x 1/2" 6W 27K, 30K40K, 50K 522
SR9E-44UN7-Temp 43-5/8" x 5/8" x 1/2" 7W 27K, 30K40K, 50K 609
SR9E-50UN8-Temp 49-5/8" x 5/8" x 1/2" 8W 27K, 30K40K, 50K 696
Medium Light Output - 1/4 watt
PART NUMBER DIMENSIONSTOTAL WATTS
KELVIN TEMP
LUMENSBased on 3000K
(approx. per fixture)*
SR9Q-8UN2-Temp 7-5/8" x 5/8" x 1/2" 2W 27K, 30K40K, 50K 207
SR9Q-14UN4-Temp 13-5/8" x 5/8" x 1/2" 4W 27K, 30K40K, 50K 414
SR9Q-20UN6-Temp 19-5/8" x 5/8" x 1/2" 6W 27K, 30K40K, 50K 621
SR9Q-26UN8-Temp 25-5/8" x 5/8" x 1/2" 8W 27K, 30K40K, 50K 828
SR9Q-32UN10-Temp 31-5/8" x 5/8" x 1/2" 10W 27K, 30K40K, 50K 1035
SR9Q-38UN12-Temp 37-5/8" x 5/8" x 1/2" 12W 27K, 30K40K, 50K 1242
SR9Q-44UN14-Temp 43-5/8" x 5/8" x 1/2" 14W 27K, 30K40K, 50K 1449
SR9Q-50UN16-Temp 49-5/8" x 5/8" x 1/2" 16W 27K, 30K40K, 50K 1656
PART NUMBER DIMENSIONSTOTAL WATTS
KELVIN TEMP
LUMENSBased on 3000K
(approx. per fixture)*
SR9H-8UN3-Temp 7-5/8" x 5/8" x 1/2" 3W 27K, 30K40K, 50K 270
SR9H-14UN6-Temp 13-5/8" x 5/8" x 1/2" 6W 27K, 30K40K, 50K 540
SR9H-20UN9-Temp 19-5/8" x 5/8" x 1/2" 9W 27K, 30K40K, 50K 810
SR9H-26UN12-Temp 25-5/8" x 5/8" x 1/2" 12W 27K, 30K40K, 50K 1080
SR9H-32UN15-Temp 31-5/8" x 5/8" x 1/2" 15W 27K, 30K40K, 50K 1350
SR9H-38UN18-Temp 37-5/8" x 5/8" x 1/2" 18W 27K, 30K40K, 50K 1620
SR9H-44UN21-Temp 43-5/8" x 5/8" x 1/2" 21W 27K, 30K40K, 50K 1890
SR9H-50UN24-Temp 49-5/8" x 5/8" x 1/2" 24W 27K, 30K40K, 50K 2160
• Under Cabinet• Interior Cabinet• Floating Shelves• Fixed Shelves• Closet
Applications
• Design for recessed flush mounting• 50,000 hour LED life at 70% lumen maintenance• Compact and versatile• Frosted lens• Poke-Home™ connectors for easy installation• 3 Year limited warranty• No special gap-connectors needed• No UV or IR• Dimmable (with compatible dimmer)
Features
Construction Materials:
Anodized extruded aluminum (heatsink), IR Acrylic (lens)
Wattage: 1/8 Watt, 1/4 Watt, 1/2 Watt LEDs
Color Temp (Kelvin): 2700K (Warm White), 3000K (Soft White)4000K (Cool White), 5000K (Daylight White)
CRI: 90+
LED Beam Angle: 120º
LED Spacing: 1-1/2"
LED Board: 6" or 12"
Input Voltage: 15 Volt DC
Mounting: Double Stick Tape / Screws (included)
Max Run: Refer to driver specs
Wiring: 18/2 solid (recommended)
Environment: Dry and damp locations
Dimming OptionsPART NUMBER DESCRIPTIONDVELV-300P 300W Diva slide dimmerDVELV-303P 300W Diva slide dimmer 3-wayMAELV-600-Color Maestro electronic smart dimmerMA-R-Color Maestro companion dimmer*WS-LED-CVD-902 Sempria dimming module for wireless system
*WS-SR-Color-902Sempria wireless dimmer/ switch. Available in Black, Gray, Ivory, Light Almond, and White**NOTE: Call TASK for alternate driver
Installation Components PART NUMBER DESCRIPTIONSP-20FT-18/2 20 foot spool of 18/2 awg solid wireSP-50FT-18/2 50 foot spool of 18/2 awg solid wireSR9-EC-KIT End Cap Kit -Wire entry openings-Light Gray Only
Task Lighting retains the right to modify the design of our products without prior notice
Power Supplies
Section
S-R-SERIES-SPEC-0618
7/16"
5/8"
7/8"
1/2"
Specifications
PART NUMBER DESCRIPTION/ OUTPUT INPUTTLD-24WSI* 24W plug in 15V DC Plug InTLD-D30WSO 30W hardwire 15V DC, 2A max. 120V AC, .3ATLD-D45WSO 45W hardwire 15V DC, 3A max. 120V AC, .4ATLD-D60WSO 60W hardwire 15V DC, 4A max. 120V AC, .5ATLD-D75WSO 75W hardwire 15V DC, 5A max. 120V AC, .6A*Call for dimming options
High Light Output - 1/2 watt
Medium Light Output - 1/4 watt
Low Light Output - 1/8 watt
27800.445.6404 • TaskLighting.com
R SeriesInstallation in Solid Bottom
S-R-SERIES-INSTALL-0618
GENERAL GUIDELINES• All wiring must meet NEC or local codes.• 18/2 solid wire is strongly recommended, from driver to fixtures, and between fixtures.• Wire length is maximum of 30 feet from driver to fixtures.• Maximum of 75 Watts of Sempria LED lighting is allowed per zone.• Place switches on the 120V side of driver.• If other than Task specified dimmers are desired, call Task Lighting for instructions.• Improper installation or applying improper voltage to fixture will void warranty. See TaskLighting.com for full warranty info.
DRIVERS• 15 VOLT DC DRIVER, supplied by Task Lighting only, must be used.• Driver must be accessible; the sink base or top of cabinet are common locations. • Do not locate driver in attic.• Some drivers may be concealed within our TR Series Angle Power Strip or Lighted Power Strip.
PRE-WIRING Run separate wire from Driver location to each zone. If total wattage of Sempria LED fixtures in zone exceeds 75 Watts, use
a second driver and run additional 18/2 solid wire for additional zone. When using two drivers, start both sets of wires from a common point and wire the zones in opposite directions. Wiring may start at either end of fixture. (Option: separate wire may be run from driver to each fixture.)
INSTALLATION1. Using a 5/8” router bit, hollow out a groove (the length of the fixture) from cabinet or shelf bottom.2. Remove lens from fixture.3. Strip 1/4” insulation from 18/2 wires that run from driver. Insert wires into terminal block at either end of fixture (RED wire to
terminal with RED mark, BLACK wire to terminal with BLACK mark.)4. Apply double stick tape (provided) to back of fixture and insert into groove. Fixture will fit tight. Secure fixture with screws
(provided). 5. Snap lens back in place.
If using end caps, please refer to the end cap instructions.
Backsplash
Counter Top
Bottom Shelf of Cabinet
Backsplash
Counter Top
Bottom Shelf of Cabinet
28 800.445.6404 • TaskLighting.com
R SeriesInstallation in Flush Panel Bottom
S-R-SERIES-INSTALL-0618
GENERAL GUIDELINES• All wiring must meet NEC or local codes.• 18/2 solid wire is strongly recommended, from driver to fixtures, and between fixtures.• Wire length is maximum of 30 feet from driver to fixtures.• Maximum of 75 Watts of Sempria LED lighting is allowed per zone.• Place switches on the 120V side of driver.• If other than Task specified dimmers are desired, call Task Lighting for instructions.• Improper installation or applying improper voltage to fixture will void warranty. See TaskLighting.com for full warranty info.
DRIVERS• 15 VOLT DC DRIVER, supplied by Task Lighting only, must be used.• Driver must be accessible; the sink base or top of cabinet are common locations. • Do not locate driver in attic.• Some drivers may be concealed within our TR Series Angle Power Strip or Lighted Power Strip.
PRE-WIRING Run separate wire from Driver location to each zone. If total wattage of Sempria LED fixtures in zone exceeds 75 Watts, use
a second driver and run additional 18/2 solid wire for additional zone. When using two drivers, start both sets of wires from a common point and wire the zones in opposite directions. Wiring may start at either end of fixture. (Option: separate wire may be run from driver to each fixture.)
INSTALLATION1. Using a 5/8” router bit, hollow out a groove (the length of fixture) from flush panel.2. Remove lens from fixture.3. Strip 1/4" insulation from 18/2 solid wires that run from driver. Insert wires into terminal block at either end of fixture (RED wire
to terminal with RED mark, BLACK wire to terminal with BLACK mark.)4. Snap lens back onto fixture.5. Insert fixture into routed groove (fixture will fit tightly.)6. If needed use a silicone adhesive, spot-secure fixture to panel from top-side.7. Attach flush panel to bottom of cabinet.
If using end caps, please refer to the end cap instructions.
Counter Top
Bottom Shelf of Cabinet
¼" Finished Panel
29800.445.6404 • TaskLighting.com
S SeriesLinear LED fixture with slim profile
PARTNUMBER DIMENSIONS
TOTAL WATTS
KELVIN TEMP
LUMENSBased on 3000K
(approx. per fixture)*
SS9E-6UN1-Temp 6-1/2" x 3/4" x 11/16" 1W 27K, 30K40K, 50K 87
SS9E-12UN2-Temp 12-1/2" x 3/4" x 11/16" 2W 27K, 30K40K, 50K 174
SS9E-18UN3-Temp 18-1/2" x 3/4" x 11/16" 3W 27K, 30K40K, 50K 261
SS9E-24UN4-Temp 24-1/2" x 3/4" x 11/16" 4W 27K, 30K40K, 50K 348
SS9E-30UN5-Temp 30-1/2" x 3/4" x 11/16" 5W 27K, 30K40K, 50K 435
SS9E-36UN6-Temp 36-1/2" x 3/4" x 11/16" 6W 27K, 30K40K, 50K 522
SS9E-42UN7-Temp 42-1/2" x 3/4" x 11/16" 7W 27K, 30K40K, 50K 609
SS9E-48UN8-Temp 48-1/2" x 3/4" x 11/16" 8W 27K, 30K40K, 50K 696
PARTNUMBER DIMENSIONS
TOTAL WATTS
KELVIN TEMP
LUMENSBased on 3000K
(approx. per fixture)*
SS9Q-6UN2-Temp 6-1/2" x 3/4" x 11/16" 2W 27K, 30K40K, 50K 207
SS9Q-12UN4-Temp 12-1/2" x 3/4" x 11/16" 4W 27K, 30K40K, 50K 414
SS9Q-18UN6-Temp 18-1/2" x 3/4" x 11/16" 6W 27K, 30K40K, 50K 621
SS9Q-24UN8-Temp 24-1/2" x 3/4" x 11/16" 8W 27K, 30K40K, 50K 828
SS9Q-30UN10-Temp 30-1/2" x 3/4" x 11/16" 10W 27K, 30K40K, 50K 1035
SS9Q-36UN12-Temp 36-1/2" x 3/4" x 11/16" 12W 27K, 30K40K, 50K 1242
SS9Q-42UN14-Temp 42-1/2" x 3/4" x 11/16" 14W 27K, 30K40K, 50K 1449
SS9Q-48UN16-Temp 48-1/2" x 3/4" x 11/16" 16W 27K, 30K40K, 50K 1656
PART NUMBER DIMENSIONSTOTAL WATTS
KELVIN TEMP
LUMENSBased on 3000K
(approx. per fixture)*
SS9H-6UN3-Temp 6-1/2" x 3/4" x 11/16" 3W 27K, 30K40K, 50K 270
SS9H-12UN6-Temp 12-1/2" x 3/4" x 11/16" 6W 27K, 30K40K, 50K 540
SS9H-18UN9-Temp 18-1/2" x 3/4" x 11/16" 9W 27K, 30K40K, 50K 810
SS9H-24UN12-Temp 24-1/2" x 3/4" x 11/16" 12W 27K, 30K40K, 50K 1080
SS9H-30UN15-Temp 30-1/2" x 3/4" x 11/16" 15W 27K, 30K40K, 50K 1350
SS9H-36UN18-Temp 36-1/2" x 3/4" x 11/16" 18W 27K, 30K40K, 50K 1620
SS9H-42UN21-Temp 42-1/2" x 3/4" x 11/16" 21W 27K, 30K 40K, 50K 1890
SS9H-48UN24-Temp 48-1/2" x 3/4" x 11/16" 24W 27K, 30K 40K, 50K 2160• Toe/Soffit Lighting
• Cove Lighting• Interior Cabinet Lighting• Display Case Lighting• Stair Lighting
Applications
• Built in light valance with light shield• 50,000 hour LED life at 70% lumen maintenance• Compact and versatile• Frosted lens• Poke-Home™ connectors for easy installation• 3 Year limited warranty• No special gap-connectors needed• No UV or IR
• Dimmable (with compatible dimmer)
Features
Construction Materials:
Anodized extruded aluminum (heatsink), IR Acrylic (lens)
Wattage: 1/8 Watt, 1/4 Watt, 1/2 Watt LEDs
Color Temp (Kelvin): 2700K (Warm White), 3000K (Soft White)4000K (Cool White), 5000K (Daylight White)
CRI: 90+
LED Beam Angle: 120º
LED Spacing: 1-1/2"
LED Board: 6" or 12"
Input Voltage: 15 Volt DC
Mounting: Double Stick Tape / Screws (included)
Max Run: Refer to driver specs
Wiring: 18/2 solid (recommended)
Environment: Dry and damp locations
S-S-SERIES-SPEC-0618
Task Lighting retains the right to modify the design of our products without prior notice
Installation Components PART NUMBER DESCRIPTIONSP-20FT-18/2 20 foot spool of 18/2 awg solid wireSP-50FT-18/2 50 foot spool of 18/2 awg solid wireSG9-IL-CONN In-line ConnectorSS9-WW-48 48” Sempria® LED WireWay for S Series
Section
3/4"
7/8"11/16"
Specifications
Power Supplies PART NUMBER DESCRIPTION/ OUTPUT INPUTTLD-24WSI* 24W plug in 15V DC Plug In
TLD-D30WSO 30W hardwire 15V DC, 2A max. 120V AC, .3ATLD-D45WSO 45W hardwire 15V DC, 3A max. 120V AC, .4ATLD-D60WSO 60W hardwire 15V DC, 4A max. 120V AC, .5ATLD-D75WSO 75W hardwire 15V DC, 5A max. 120V AC, .6A*Call for dimming options
Medium Light Output - 1/4 watt
Hight Light Output - 1/2 watt
Low Light Output - 1/8 watt
Dimming OptionsPART NUMBER DESCRIPTIONDVELV-300P 300W Diva slide dimmerDVELV-303P 300W Diva slide dimmer 3-wayMAELV-600-Color Maestro electronic smart dimmerMA-R-Color Maestro companion dimmer*WS-LED-CVD-902 Sempria dimming module for wireless system
*WS-SR-Color-902Sempria wireless dimmer/ switch. Available in Black, Gray, Ivory, Light Almond, and White**NOTE: Call TASK for alternate driver
30 800.445.6404 • TaskLighting.com
S SeriesInstallation Instructions
S-S-SERIES-INSTALL-0618
DD
$
Driver #1
15vDC
120V Switch
Driver #2Start both sets of wires from drivers at a common point and wire the zones in opposite directions.
WHEN USING TWO DRIVERS:
GENERAL GUIDELINES• All wiring must meet NEC or local codes.• 18/2 solid wire is strongly recommended, from driver to fixtures, and between fixtures.• Wire length is maximum of 30 feet from driver to fixtures.• Maximum of 75 Watts of Sempria LED lighting is allowed per zone.• Place switches on the 120V side of driver.• If other than Task specified dimmers are desired, call Task Lighting for instructions.• Improper installation or applying improper voltage to fixture will void warranty. See TaskLighting.com for full warranty info.
DRIVERS• 15 VOLT DC DRIVER, supplied by Task Lighting only, must be used.• Driver must be accessible; the sink base or top of cabinet are common locations. • Do not locate driver in attic.• Some drivers may be concealed within our TR Series Angle Power Strip or Lighted Power Strip.
PRE-WIRING Run separate wire from Driver location to each zone. If total wattage of Sempria LED fixtures in zone exceeds 75 Watts, use
a second driver and run additional 18/2 solid wire for additional zone. When using two drivers, start both sets of wires from a common point and wire the zones in opposite directions. Wiring may start at either end of fixture. (Option: separate wire may be run from driver to each fixture.)
INSTALLATION1. Remove lens from fixture. 2. Select side of fixture that will attach to mounting surface. Using 1/8” bit, drill two mounting holes one near each end of fixture
(location is indicated by BLACK mark on end of fixture.) DO NOT pierce or damage LED board. Deburr metal. 3. Apply foam double-stick tape squares to same side of fixture, avoiding the mounting holes. 4. Strip ¼” from RED 18/2 solid wire; push wire straight into terminal block opening with RED mark. Strip BLACK 18/2 solid wire;
push wire straight into terminal block opening with BLACK mark. (If using 18/2 stranded wire, ends must be tinned. Depress terminal block tab with ball point pen and insert wire.)5. Cut wires to fit between adjacent fixtures. Insert wires into terminal blocks, maintaining polarity (RED wire to RED terminal,
BLACK wire to BLACK terminal.)6. If fixture does not light, reverse wires. Gently depress terminal block tab and carefully pull wires straight out. 7. Mounting surface must be finished and dust/residue free. Peel backing from tape squares and press firmly into place.8. Using screws provided, secure fixture in place. DO NOT pierce LED strip with screws, nails, staples or any other mechanical
device.9. Snap lens back into place.
31800.445.6404 • TaskLighting.comS-S-SERIES-INSTALL-0618
Stairs Cove Soffit-Above Cabinet
Window Sill
Deck Rail
Toe Kick
window
backsplash
Interior Cabinet-Vertical
top view
shelf
S SeriesMounting Positions ‒ Not to Scale
32 800.445.6404 • TaskLighting.com
Lighted Closet RodIlluminated LED Lighted Closet Rod
PART NUMBER LENGTH WATTS KELVIN TEMP
LUMENSBased on 3000K
(approx. per fixture)*
LC9R18-4-P-Finish-Temp 18" 4 27K, 30K, 40K, 50K 621 LC9R24-6-P-Finish-Temp 24" 6 27K, 30K, 40K, 50K 828 LC9R30-8-P-Finish-Temp 30" 8 27K, 30K, 40K, 50K 1035 LC9R36-10-P-Finish-Temp 36" 10 27K, 30K, 40K, 50K 1242 LC9R42-12-P-Finish-Temp 42" 12 27K, 30K, 40K, 50K 1449 LC9R48-14-P-Finish-Temp 48" 14 27K, 30K, 40K, 50K 1656 LC9R54-16-P-Finish-Temp 54" 16 27K, 30K, 40K, 50K 1863 LC9R60-18-P-Finish-Temp 60" 18 27K, 30K, 40K, 50K 2070 LC9R66-20-P-Finish-Temp 66" 20 27K, 30K, 40K, 50K 2277 LC9R72-22-P-Finish-Temp 72" 22 27K, 30K, 40K, 50K 2484 LC9R78-24-P-Finish-Temp 78" 24 27K, 30K, 40K, 50K 2691 LC9R84-26-P-Finish-Temp 84" 26 27K, 30K, 40K, 50K 2898 LC9R90-28-P-Finish-Temp 90" 28 27K, 30K, 40K, 50K 3105 LC9R96-30-P-Finish-Temp 96" 30 27K, 30K, 40K, 50K 3312
Flange set included with each closet rod
PART NUMBERS
Finish Options
Installation Components
LIGHTEDCLOSETROD-SPEC-0618
PART NUMBER DESCRIPTIONSP-20FT-18/2 20 foot spool of 18/2 awg solid wireSP-50FT-18/2 50 foot spool of 18/2 awg solid wire
MCS-10-Color 10W Max - Magnetic Contact Switch. Available in Brown, Gray, or White
MCS-100-Color 100W Max - Magnetic Contact Switch.Available in Brown, Gray, or White
MS-OPS5M-Color 5 Amp - Maestro Occupancy Sensor SwitchMS-VPS5M-Color 5 Amp - Maestro Vacancy Sensor Switch
Fixture Section
1-1/8"
1-1/4"
1-1/2"
3-3/8"
15/16"
Flange Section
TASK LIGHTING
MATERIAL
DATE
DATEREV
REVISIONS
CHECKED
APPROVEDDESCRIPTION
SIZE
ZONE
DRAWN A
REV DATE
Dimensions are in inches
TASK LIGHTING
MATERIAL
DATE
DATEREV
REVISIONS
CHECKED
APPROVEDDESCRIPTION
SIZE
ZONE
DRAWN A
REV DATE
Dimensions are in inches
1" Wide11-7/8"
10-7/8"
3"
Center Bracket Support Section
2-1/2"
• 50,000 hour LED life at 70% lumen maintenance• Each end field trimmable up to 3"• 15V DC plug-in or hardwire drivers (ordered separately)• Accessories sold separately: Center Bracket Support• No UV or IR
Features
PART NUMBER DESCRIPTION
LC9R-CBS-P-Finish Center Bracket Support (Use every 4' for fixtures over 48")
Accessories
• Closet Lighting• Laundry Room Lighting
Applications
Specifications
Task Lighting retains the right to modify the design of our products without prior notice
Dimensions: 18" - 96" L x 1-1/2" W x 1-1/4" H
Construction Materials: Extruded aluminum-Powder Coat Finish
Wattage: 1/4 Watt LEDs
Color Temp (Kelvin): 2700K (Warm White), 3000K (Soft White)4000K (Cool White), 5000K (Daylight White)
CRI: 90+
LED Beam Angle: 120º
LED Spacing: 1-1/2”LED Board: 6" or 12"Input Voltage: 15 Volt DCMounting: Flange set and center bracketsMax Run: Refer to driver specsWiring: 18/2 solid (recommended)Environment: Dry and wet locations
Flange SetPART NUMBER DESCRIPTIONLC9R-FS-P-BK LED Closet Rod Flange Set-BlackLC9R-FS-P-BZ LED Closet Rod Flange Set-BronzeLC9R-FS-P-SN LED Closet Rod Flange Set-Satin NickelLC9R-FS-P-WT LED Closet Rod Flange Set-White
Power Supplies PART NUMBER DESCRIPTION/ OUTPUT INPUTTLD-24WSI* 24W plug in 15V DC Plug In
TLD-D30WSO 30W hardwire 15V DC, 2A max. 120V AC, .3ATLD-D45WSO 45W hardwire 15V DC, 3A max. 120V AC, .4ATLD-D60WSO 60W hardwire 15V DC, 4A max. 120V AC, .5ATLD-D75WSO 75W hardwire 15V DC, 5A max. 120V AC, .6A*Call for dimming options
Medium Light Output - 1/4 watt
White (WT)Satin Nickel (SN)Bronze (BZ)Black (BK)
33800.445.6404 • TaskLighting.com
1. Rod and lens must be 3/8” shorter than closet width measurement.
2. If field-trimming is necessary, slide lens out of fixture. Use scissors or shears to trim lens to length (3/8” shorter than closet width.)
7. Holding rod, lens, and loose flange in one hand, push RED solid wire push straight into LED terminal block opening with RED mark. Push BLACK solid wire straight into terminal with BLACK mark. (18/2 solid wire is recommended. If using 18/2 stranded wire, ends must be tinned. Depress terminal block tab with ball point pen and insert wire.”
3. Use chop or hacksaw to cut rod to proper length. DO NOT CUT LED CIRCUIT BOARD. Deburr all cut edges. Slide lens back into place.
5. Using #8 ( 1 1/2”) wood screws provided, secure one flange to wall stud on “non-wired” side of closet.
6. Slide second flange onto rod with grooved side facing opposite wall.
8. Insert “non-wired” side of rod into installed flange.
NOTE: Maintain wire polarity. If fixture does not illuminate after making wire connections, reverse wires at driver. (A slight delay "on" is possible.)
9. Partially fasten second flange to wall using ONE screw. Carefully position wires into one of the groves located on back of flange. Secure flange to wall with remaining screw, making sure wire is in flange groove. (If wires come through drywall and into the fixture, this step is not needed.)
LIGHTEDCLOSETROD-SPEC-0618
4. Prep wires for LED fixture: Strip 1/4” of insulation from RED and BLACK wires.
0. Push rod against wall in “non-wired” flange and tighten set screw.
1
1. Cut Sempria WireWay to cover wires from flange exit to driver. Remove cover of WireWay and secure mounting base (wider piece) to wall with screws provided. Position wires inside base and snap cover (smaller piece) into place. Deburr all cut WireWay edges to protect wire insulation.
1
Lighted Closet RodInstallation Instructions
34 800.445.6404 • TaskLighting.com
PuckLED Lighting with a slim profile for multiple applications
PART NUMBER KELVIN TEMPLUMENSBased on 3000K
(approx. per fixture)*
SPL9-FR-P-Finish-Temp 2700K, 3000K 210
Specifications
Features
Task Lighting retains the right to modify the design of our products without prior notice
Dimensions: 2-1/4" x 2-1/4" diameter, 2" cut-out
Construction Materials: Cast Aluminum (heatsink), frosted glass
Wattage: 4 Watts
Color Temp (Kelvin): 2700K (Warm White) or 3000K (Soft White)
CRI: 85+
Input Voltage: 15 Volt DC
Mounting: Screws (included)
Max Run: Refer to driver specs
Wiring: 6 ft. Lead Wire Included
Environment: Dry and damp locations
SEMPRIA-PUCK-SPEC-0618
Housing Section
Fixture Section
Cutout
Finish Options
• Interior Cabinet Lighting• Under Cabinet Lighting• Display/Accent Lighting
Applications
2 1/4"
5/16"
5/8"
Installation Components PART NUMBER DESCRIPTIONSP-20FT-18/2 20 foot spool of 18/2 awg solid wire
SP-50FT-18/2 50 foot spool of 18/2 awg solid wire
• 50,000 hour LED life at 70% lumen maintenance• Surface or recess mount• Frosted, light-diffusing lens• 4 Watts per fixture• 3-year limited warranty • No UV or IR• Dimmable (with compatible dimmer)
Not recommended for sheetrock installation.
1 7/8"
Power Supplies PART NUMBER DESCRIPTION/ OUTPUT INPUTTLD-24WSI* 24W plug in 15V DC Plug In
TLD-D30WSO 30W hardwire 15V DC, 2A max. 120V AC, .3ATLD-D45WSO 45W hardwire 15V DC, 3A max. 120V AC, .4ATLD-D60WSO 60W hardwire 15V DC, 4A max. 120V AC, .5ATLD-D75WSO 75W hardwire 15V DC, 5A max. 120V AC, .6A*Call for dimming options
Puck Lights
Dimming OptionsPART NUMBER DESCRIPTIONDVELV-300P 300W Diva slide dimmer
DVELV-303P 300W Diva slide dimmer 3-way
MAELV-600-Color Maestro electronic smart dimmer
MA-R-Color Maestro companion dimmer
*WS-LED-CVD-902 Sempria dimming module for wireless system
*WS-SR-Color-902Sempria wireless dimmer switch. Available in Black, Gray, Ivory, Light Almond, and White**NOTE: Call TASK for alternate driver
White (WT)Satin Nickel (SN)Bronze (BZ)Black (BK)
35800.445.6404 • TaskLighting.comSEMPRIA-MINICAN-SPEC-0618
Fixture Section
2"
3/4"
1"
Beam Spread Chart
Housing Section Cutout
2 1/4"
2"
Mini CanLED Lighting with a slim profile for multiple applications
PART NUMBER BEAM SPREAD KELVIN TEMPLUMENSBased on 3000K
(approx. per fixture)*
SPMC-11-P-Finish-Temp 11º Spot 2700K, 3000K 240
SPMC-20-P-Finish-Temp 20º Narrow Flood 2700K, 3000K 240
SPMC-38-P-Finish-Temp 38º Flood 2700K, 3000K 240
Specifications
Task Lighting retains the right to modify the design of our products without prior notice
Dimensions: 2-1/4" x 2-1/4" diameter, 2" cut-out
Construction Materials: Cast Aluminum (heatsink)
Wattage: 4 Watts
Color Temp (Kelvin): 2700K (Warm White) or 3000K (Soft White)
CRI: 85+
Beam Angle: 11, 20, or 38 degree beam spread
Input Voltage: 15 Volt DC
Mounting: Screws (included)
Max Run: Refer to driver specs
Wiring: 6 ft. Lead Wire Included
Environment: Dry and damp locations
Finish Options
• 50,000 hour LED life at 70% lumen maintenance• Surface or recess mount• 4 Watts per fixture• 3-year limited warranty • No UV or IR• Dimmable (with compatible dimmer)
Features
• Interior Cabinet Lighting• Display/Accent Lighting• Above Sink Lighting
Applications
Installation Components PART NUMBER DESCRIPTIONSP-20FT-18/2 20 foot spool of 18/2 awg solid wire
SP-50FT-18/2 50 foot spool of 18/2 awg solid wire
Not recommended for sheetrock installation.
Power Supplies PART NUMBER DESCRIPTION/ OUTPUT INPUTTLD-24WSI* 24W plug in 15V DC Plug In
TLD-D30WSO 30W hardwire 15V DC, 2A max. 120V AC, .3ATLD-D45WSO 45W hardwire 15V DC, 3A max. 120V AC, .4ATLD-D60WSO 60W hardwire 15V DC, 4A max. 120V AC, .5ATLD-D75WSO 75W hardwire 15V DC, 5A max. 120V AC, .6A*Call for dimming options
Mini Cans
Dimming OptionsPART NUMBER DESCRIPTIONDVELV-300P 300W Diva slide dimmer
DVELV-303P 300W Diva slide dimmer 3-way
MAELV-600-Color Maestro electronic smart dimmer
MA-R-Color Maestro companion dimmer
*WS-LED-CVD-902 Sempria dimming module for wireless system
*WS-SR-Color-902Sempria wireless dimmer switch. Available in Black, Gray, Ivory, Light Almond, and White**NOTE: Call TASK for alternate driver
White (WT)Satin Nickel (SN)Bronze (BZ)Black (BK)
36 800.445.6404 • TaskLighting.com S-PUCK/MINICAN-INSTALL-0618
Call Task Lighting if you have any questions or need assistance.
Determine exact location of fixtures and drill 2" diameter hole.
Run fixture wires through the hole and feed them in the direction of the driver.
1 Connect RED driver wire with RED fixture wire using wire nuts provided. Repeat process with BLACK wires, making sure all connections are tight.
2 Squeeze wing tabs on side of fixture.
3
All wiring must meet NEC® or local codes.The maximum wire length of the driver and fixture wire is 30 feet.Not recommended for sheetrock installation.
OPTIONAL: Surface Mounted Fixtures
Drawing shows wiring for two fixtures using wire nut connectors
Driver
Insert fixture into hole. 4
Run fixture wires through the hole and feed them in the direction of the driver. Secure housing to surface with two screws provided. Follow steps #2 - #4 above.
Puck/Mini CanInstallation Instructions
37800.445.6404 • TaskLighting.com
Supporting ProductsInstallation Components
Installation Components PART NUMBER DESCRIPTIONSP-20FT-18/2 20 foot spool of 18/2 awg solid wire
SP-50FT-18/2 50 foot spool of 18/2 awg solid wire
DVELV-300PDVELV-303P
MAELV-600-Color MA-R-Color
TLD-D30WSOTLD-D45WSOTLD-D60WSOTLD-D75WSO
• Constant Voltage• Short circuit, over-load, voltage, and temperature protection• High reliability, high efficiency• UL listed Class 2 power supply
TLD-24WSI
PART NUMBER DESCRIPTIONMCS-10-BR 10W Max - Magnetic Contact Switch - BrownMCS-10-GR 10W Max - Magnetic Contact Switch - GrayMCS-10-WT 10W Max - Magnetic Contact Switch - WhiteMCS-100-BR 100W Max - Magnetic Contact Switch - BrownMCS-100-GR 100W Max - Magnetic Contact Switch - GrayMCS-100-WT 100W Max - Magnetic Contact Switch - White
Magnetic Contact Switch
Power Supplies PART NUMBER DESCRIPTION/ OUTPUT INPUT DIMENSIONS
TLD-24WSI* 24W plug in 15V DC Plug In 3-1/4� x 1-1/2� x 1-7/8�
TLD-D30WSO 30W hardwire 15V DC, 2A max. 120V AC, .3A 8-1/8� x 2� x 1-3/4�TLD-D45WSO 45W hardwire 15V DC, 3A max. 120V AC, .4A 8-1/8� x 2� x 1-3/4�TLD-D60WSO 60W hardwire 15V DC, 4A max. 120V AC, .5A 8-1/8� x 2� x 1-3/4�TLD-D75WSO 75W hardwire 15V DC, 5A max. 120V AC, .6A 8-1/8� x 2� x 1-3/4�*Call for dimming options
Dimming OptionsPART NUMBER DESCRIPTIONDVELV-300P 300W Diva slide dimmer
DVELV-303P 300W Diva slide dimmer 3-way
MAELV-600-Color Maestro electronic smart dimmer
MA-R-Color Maestro companion dimmer
*WS-LED-CVD-902 Sempria dimming module for wireless system
*WS-SR-Color-902Sempria wireless dimmer switch. Available in Black, Gray, Ivory, Light Almond, and White**NOTE: Call TASK for alternate driver
SEMPRIA-INSTALLATION-0618
1-7/16�
1-7/8�
3-1/4�
1-3/4�
8-1/8�
2�
38 800.445.6404 • TaskLighting.com
120V Bar LightDirect wire, easy to install bar light
Linair 120V Bar Light
Optional Installation Components PART NUMBER DESCRIPTION320-C 3/8" Trade Romex clamp
Black Cord 6FT 6 ft. Hardwire power cord w/ ground. 18/3 SJB cord(for field installation only)
• Under Cabinet Lighting• Display Case Lighting• Over Sink Lighting
Applications
Task Lighting retains the right to modify the design of our products without prior notice
Dimming OptionsPART NUMBER DESCRIPTIONMACL-153M-COLOR Maestro LED DimmerMA-R-COLOR Preset Smart Remote (for multiple switching)
SpecificationsConstruction Materials: Extruded aluminum housing (heatsink), Impact
Resistant Acrylic (lens), Powder coat finish
Color Temp (Kelvin): 2700K (Warm White) or 3000K (Soft White)
CRI: 90+
LED Beam Angle: 120º
LED Spacing: 3"
LED Board: 8-3/4"
Power Rating: 130 V AC Max, 50/60 HZ
Mounting: Wood Screws (included)
Wiring: 12-14 ga romex (3/8 Trade Romex, Clamp Included)
Environment: Dry and damp locations
Finish Options
LINAIR-BARLIGHT-SPEC-0618
MACL-153M-COLOR
• 50,000 hr LED life at 70% lumen maintenance• Integral Driver• Easy open/close installation • Multiple knockout locations (6)• 3 Year limited warranty• No UV or IR• Dimmable (with compatible dimmer)
Features
Section
PART NUMBER LENGTH WATTS KELVINTEMP
LUMENSBased on 3000K
(approx. per fixture)*
LB9L10-5-P-Finish-Temp 10� x 4-1/4� x 1� 5 2700K 3000K 360
LB9L18-7-P-Finish-Temp 18-1/2� x 4-1/4� x 1� 7 2700K 3000K 720
LB9L27-11-P-Finish-Temp 27-1/4� x 4-1/4� x 1� 11 2700K 3000K 1080
LB9L36-15-P-Finish-Temp 36� x 4-1/4� x 1� 15 2700K 3000K 1440
1"
4-1/4"
1-1/4"3"
Satin Nickel (SN)Bronze (BZ) White (WT)
39800.445.6404 • TaskLighting.comLINAIR-BARLIGHT-INSTALL-0618
14/2 to 10/2
120 Volt (Black)
Neutral (White)
Ground Green
Figure 3Factory
Connection
Driver
Switch
Figure 2
Figure 1
Before installing, turn power off at main breaker panel.
Expose wiring compartment by inserting flat blade screwdriver between housing and cover; Gently pry down to open. (Figure 1)
Position fixture in mounting location to determine which knock-out to use.
Install supplied conduit connector into knock-out. Secure wire. Connector may be used with: 3/8 trade sized reduced wall flexible steel or aluminum conduit, 14/2 to 10/2 non-metallic sheathed cable, or 14/2 to 10/2 steel armored cable.
All installations must comply with national and local electrical codes.
Using orange push connector provided, connect WHITE to WHITE wire from driver. (Figure 3)
Using orange push connector provided, connect BLACK to BLACK wire from the 120V side of the fixture switch. (Figure 3)
Ensure all wires are pushed to inside of housing; snap cover shut.
Turn power on at main breaker panel.
Mount fixture with screws provided. (Figure 2)
Secure ground wire (GREEN) to PEM stud marked with on fixture
120V Bar LightInstallation Instructions
1206 M Avenue Kearney, NE 68847 • P: 800.445.6404 • F: 855.234.9401 • TaskLighting.comSPEC&INSTALL-V1.1-0618
Specifications & Installation Instructions