SPECIFICATIONS - cabinetexpress.com · mineral deposits/streaks, knots, sap runs, pin holes, and...

SPECIFICATIONSEffective February 2017. Supersedes all prior versions.

NEW PRODUCTFirst order date February 6, 2017

Construction EnhancementsAdjustable 3/4" thick Wall and Base shelves (exclusions may apply; see SKU notes section for specific details)

Standard natural maple interiors and drawers on Bartlett (exclusions may apply)

Plywood Matching Laminate Exterior is now standard on PEPRPLY and PREPRP End Panels

Vanity CabinetsVanity Drawer Trimmable (VDT30B and VDT36B), see page 37

Universal Design CabinetsVanity Wall Sink Cabinets (VWS2923, VWS3223, VWS3523, VWS4123), see page 43

Removable Vanity Wall Sink Cabinets (RVWS3032, RVWS3332, RVWS3632, RVWS4232), see page 43

Accessories and PartsSink Tip-Out Trays (STOT30WH and STOT36WH), see page 52

DISCONTINUATIONSLast Order February 3, 2017

White interiors and drawers from White to Natural maple laminate

Vanity Drawer Trimmable (VDT30 and VDT36)

Adjustable 1/2" thick Wall Shelves

Fixed Shelves on Base and Vanity Cabinets

Utility Shelf Kits (UKS_ _WH, UKS_ _ _ _WH, UKS_ _ _ _WHPL, UKS_ _ _ _WHPL)

Pantry Roll Tray Kit (UPK_ _WH)

Roll Tray Kit (TKIT_ _WH)

NE

WP

RO

DU

CTS

INC

LUD

ED

INTH

ISG

UID

E

Product Description Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

Product Code Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

Characteristics of Wood . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

Characteristics of Laminate . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

Humidification Effects . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

Full and Partial Overlay Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

Common Style Numbers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

Door Styles/Door Style Numbers/Finish Availability . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-7

Finish Descriptions and Process . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

Construction Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-13

Wall Cabinets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14-23

Wall Cabinets/Straight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14-18

Wall Cabinets/Corner . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19-23

Base Cabinets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24-30

Base Cabinets/Straight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24-25

Base Cabinets/Sink . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26-27

Base Cabinets/Drawer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28

Base Cabinets/Corner . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28-30

Tall Cabinets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31-33

Vanity Cabinets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34-36

Universal Design Cabinets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37-42

Mouldings/Trim/Fillers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43-46

Panels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47-49

Accessories & Parts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51-54

Warped Door Policy/Cabinet Care Suggestions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55

Policies/Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56

Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57

TAB

LEO

FC

ON

TEN

TS

TABLE OF CONTENTS

1Effective February 6, 2017

Description Code Page

Base Cabinet B 24

Base Cabinet Universal Design B..32.5 37

Base Cabinet w/Full Height Doors Universal Design B..32.5FH 37

Base Cabinet w/Full Height Doors, 12" Deep B..FH-12 25

Base Cabinet w/Tray Divider B..TD 24

Base Corner BC 30

Base Corner Cabinet Universal Design BC..32.5 41

Base Wastebasket BWB 25

Batten Moulding MBAT8 45

Crown Moulding MCROWN8 44

Cove Moulding MCV8 45

Diagonal Corner Wall Cabinet DC 19

Double Wastebasket Roll-Out Kit DWBR 53

End Panel w/Stile PEPR 47

Filler F 46

Frame Spacer HNGSPCRF 54

Full Overlay Crown Moulding MFOLCR8 44

Hinge Spacer HNGSPCRD 54

Hinge Angle Restrictor Clip HNGRESCLP 54

Laminate End Panel EPA 49

Outside Corner Moulding MOCW8 43

Oven Cabinet OCSD 31

Pantry Roll Tray Kit UPK 52

Plywood End Panel w/Stile PEPRPLY 47

Plywood Refrigerator End Panel w/Stile PREPRP 47

Plywood Sink Front End Panel PSFEPPLY 47

PureStyle™ Full Overlay Crown Moulding PSMFOLCR8 44

PureStyle™ Crown Moulding PSMCROWN8 44

PureStyle™ Quarter Round Moulding PSMQR8 45

PureStyle™ Scribe Moulding PSMSW8 43

PureStyle™ Tall Crown Moulding PSMTCROWN8 44

PureStyle™ Trim Moulding PSMTW8 43

Quarter Round Moulding MQR8 45

Refrigerator End Panel PREF 47

Refrigerator End Panel w/Stile PREPR 47

Refrigerator Wall Cabinet RW 17

Removable Sink Bases w/Front Panel RSB 26

Removable Sink Bases w/Front Panel Universal Design RSB..32.5 38

Description Code Page

Removable Vanity Wall Sink Cabinet RVWS 42

Roll Tray Kit TKIT 52

Sink Base Universal Design SB..32.5 38

Sink Front Corner SFC 27

Sink Front End Panel PSFEP 47

Sink Front Universal Design SF..32.5 0

Sink/Range Base SB 26

Sink/Range Front SF 27

Sink Tip-Out Trays STOT..WH 0

Square Corner Easy Reach Cabinet SCER 28

Square Corner Roto Base SCR 28

Square Corner Roto Base Universal Design SCR..32.5 39

Square Corner Wall Cabinet SC 22

Stock Panel - Aristex™ Laminate PA 48

Stock Panel - Veneer P 48

Stock Panel - Veneer PP 48

Sink Unit w/Front Panel Universal Design SU..32.5 39

Tall Crown Moulding MTCROWN8 44

Three Drawer Base DB 28

Three Drawer Base Universal Design DB..32.5 39

Trim Moulding MTW8 43

Toekick TOEKICK 50

Toekick Cap TKC 50

Touch-Up Kit TUKIT 54

Utility Cabinet U 32

Utility Shelf Kit UKS 51

Valance Straight V..ST 46

Vanity Base VB 34

Vanity Drawer Trimmable VDT..B 36

Vanity Sink Base VSB 34

Vanity Sink Base Universal Design VSB..32.5 41

Vanity Tapered End Panel VTEP 50

Vanity Three Drawer Base VDB 36

Vanity Wall Sink Cabinet VWS 42

Veneer End Panel EPV 49

Wall Cabinet W 14

Wood Scribe Moulding MSW8 43

PR

OD

UC

TD

ESC

RIP

TIO

NIN

DE

X


Code Description Page

B Base Cabinet 24

B..32.5 Base Cabinet Universal Design 37

B..32.5FH Base Cabinet w/Full Height Doors Universal Design 37

B..FH-12 Base Cabinet w/Full Height Doors, 12" Deep 25

B..TD Base Cabinet w/Tray Divider 24

BC Base Corner 30

BC..32.5 Base Corner Cabinet Universal Design 41

BWB Base Wastebasket 25

DB Three Drawer Base 28

DB..32.5 Three Drawer Base Universal Design 39

DC Diagonal Corner Wall Cabinet 19

DWBR Double Wastebasket Roll-Out Kit 53

EPA Laminate End Panel 49

EPV Veneer End Panel 49

F Filler 46

HNGSPCRD Hinge Spacer 54

HNGSPCRF Frame Spacer 54

HNGRESCLP Hinge Angle Restrictor Clip 54

MBAT8 Batten Moulding 45

MCROWN8 Crown Moulding 44

MCV8 Cove Moulding 45

MFOLCR8 Full Overlay Crown Moulding 44

MOCW8 Outside Corner Moulding 43

MQR8 Quarter Round Moulding 45

MSW8 Wood Scribe Moulding 43

MTCROWN8 Tall Crown Moulding 44

MTW8 Trim Moulding 43

OCSD Oven Cabinet 31

P Stock Panel - Veneer 48

PA Stock Panel - Aristex™ Laminate 48

PEPR End Panel w/Stile 47

PEPRPLY Plywood End Panel w/Stile 47

PP Stock Panel - Veneer 48

PREF Refrigerator End Panel 47

PREPR Refrigerator End Panel w/Stile 47

PREPRP Plywood Refrigerator End Panel w/Stile 47

PSFEP Sink Front End Panel 47

PSFEPPLY Plywood Sink Front End Panel 47

Code Description Page

PSMCROWN8 PureStyle™ Crown Moulding 44

PSMFOLCR8 PureStyle™ Full Overlay Crown Moulding 44

PSMQR8 PureStyle™ Quarter Round Moulding 45

PSMSW8 PureStyle™ Scribe Moulding 43

PSMTCROWN8 PureStyle™ Tall Crown Moulding 44

PSMTW8 PureStyle™ Trim Moulding 43

RSB Removable Sink Bases w/Front Panel 26

RSB..32.5 Removable Sink Bases w/Front Panel Universal Design 38

RVWS Removable Vanity Wall Sink Cabinet 42

RW Refrigerator Wall Cabinet 17

SB Sink/Range Base 26

SB..32.5 Sink Base Universal Design 38

SC Square Corner Wall Cabinet 22

SCER Square Corner Easy Reach Cabinet 28

SCR Square Corner Roto Base 28

SCR..32.5 Square Corner Roto Base Universal Design 39

SF Sink/Range Front 27

SF..32.5 Sink Front Universal Design 0

SFC Sink Front Corner 27

STOT..WH Sink Tip-Out Trays 0

SU..32.5 Sink Unit w/Front Panel Universal Design 39

TKC Toekick Cap 50

TKIT Roll Tray Kit 52

TOEKICK Toekick 50

TUKIT Touch-Up Kit 54

U Utility Cabinet 32

UPK Pantry Roll Tray Kit 52

UKS Utility Shelf Kit 51

V..ST Valance Straight 46

VB Vanity Base 34

VDB Vanity Three Drawer Base 36

VDT..B Vanity Drawer Trimmable 36

VSB Vanity Sink Base 34

VSB..32.5 Vanity Sink Base Universal Design 41

VTEP Vanity Tapered End Panel 50

VWS Vanity Wall Sink Cabinet 42

W Wall Cabinet 14

PR

OD

UC

TC

OD

EIN

DE

X


Wood Types

No matter which wood type you choose for your new kitchen or bath cabinetry, please keep in mind that no two pieces ofwood are exactly the same. Stains are likely to exaggerate the difference between open and closed grains and othermarkings in wood. Grain variation and color change should be expected. As hardwood ages, it will darken when exposed todifferent types of light. Color differences or changes in wood can also be caused by exposure to harsh chemicals, extremeheat, or other contributing external conditions. Additionally, wood species exhibit other defining characteristics, such asmineral deposits/streaks, knots, sap runs, pin holes, and wormholes. These markings make the wood unique and contributeto its enduring beauty.

Oak▶ Very strong wood with distinct grain patterns▶ Grain variations create a color gradation when stain is applied▶ Grain patterns include fine lines, pin stripes, leafy grains, and watery figures

Birch▶ Even-textured, fine-grained wood with a curly or wavy pattern▶ Strong with a high resistance to abrasion▶ Smooth, dense surface texture▶ Tight wood grain appearance

Characteristics of Laminates

Thermofoil▶ Doors & drawer fronts are shaped MDF core covered with a seamless vinyl laminate on face & edges, and a melamine

laminate on back▶ Vinyl laminate is applied to MDF with an adhesive using heat & pressure▶ Creates a product with excellent wear and heat resistance properties

Humidification

Cabinet components are typically manufactured at a target range of 40%–50% relative humidity. This works well becauseeven unhumidified homes stay between 20% and 70% in normal years with typical cooking and washing activities.

In extremely cold, dry winters some doors can be exposed to conditions where relative humidity is below 20% for weeks at atime, causing shrinkage to occur. Conversely, where in-home relative humidity exceeds 70% for extended periods of time,expansion could occur. In certain geographic locations of the country, it is natural for the humidity to reach and remain at80% for several weeks during the new construction period. Exposure to sustained conditions such as these could causeopening of the joints, and will not be considered as a reason for product replacement.

Contractor's Choice recommends product be stored and installed in an atmosphere where the humidity level andtemperature are controlled.

Steps Consumers Can Take To Protect Real Wood Furnishings

– Keep an eye on the humidity inside the home. Reasonably accurate digital thermometers-hygrometer units are availableto measure humidity.

– Maintain the humidity at or above 20% when the temperature is below 20 degrees and over 35% when thetemperature is above 20 degrees. Some ways this may be accomplished are installing a whole-house humidifier on thefurnace, running a portable humidifier in key rooms, or placing pans of water near the heat registers.

– Don’t over do it. Significant condensation on windows is a sign the humidity levels are too high for outside temperatureconditions.

– Recognize that finished wood responds to humidity over a period of several days to several weeks. It takes timebefore the wood returns to normal after any correction to the environment.

CH

AR

AC

TER

ISTI

CS

OF

WO

OD

&LA

MIN

ATE

/H

UM

IDIF

ICA

TIO

NE

FFE

CTS


Full and Partial Overlay Specifications

Full Overlay

5/8"

1/4"

1/4"

1/4"

1/4"1/2"

1/4"

1/2" 1/2"1/4"1/4"

1/4"Wall Cabinet

UtilityCabinet

BaseCabinet*

DrawerBase*

Partial Overlay21/8"

11/16"

11/16"

11/16"

7/8"

7/8"

11/16"

21/8"

11/16" 21/8"

11/16"21/8"

Wall Cabinet

UtilityCabinet

BaseCabinet*

DrawerBase*

*35" high application shownOne double door center stile cabinet has the same reveal as two single door cabinets.

Full Overlay▶ Full overlay doors reveal 1∕ 4" of the

cabinet face frame.

1 16

Partial Overlay 7∕16"▶ Partial overlay doors reveal 11∕ 16" of the

cabinet face frame.

Common Style Numbers for Finishes

In addition to the style numbers for door styles, there are several common items such as mouldings, panels,valances, fillers, organizers, wood hood units, open shelf units, and other parts that have been changed to acommon style number based on finish. Look for the symbol (shown left) used throughout this book indicatingCommon Items. Please reference these common style numbers in the chart below.

Birch Autumn* 032Birch Rouge* 034Birch Saddle* 036Birch Sarsaparilla* 035Oak Wheat 030Thermofoil/White** 031

* Use Maple for Birch common items.** White common style items will be painted hardwood.

M Miscellaneous Style 011 Miscellaneous items such as Utility Shelf Kits, Roll Tray Kits, andSink Tip-Out Kits should use Common Style #011.

DO

OR

STY

LES

/C

OM

MO

NST

YLE

NU

MB

ER

S


DOOR STYLESAlbany

Square Base Square Wall

drawerfrontprofile

27/32"

doorprofile

FINISH AVAILABILITY

Species FinishStandard

ConstructionAll PlywoodConstruction

CommonStyle

Birch

Autumn 11W 12W 032Rouge 11Y 12Y 034Saddle 11V 12V 036Sarsaparilla 11Z 12Z 035

▶ Full Overlay▶ Flat Veneer Center Panel▶

3∕ 4" Thick Solid Birch Door Rail▶ Hardware Recommended

Bartlett


drawerfrontprofile

doorprofile

FINISH AVAILABILITY



CommonStyle

Thermofoil White 13C 14C 031

▶7∕ 16" Overlay

▶ Raised Center Panel▶ Thermofoil Heat Formed and Glued Over a 5∕ 8"

MDF Core▶ Beveled Edges on Outside of Door Frame and

Drawer Front▶ No Hardware Required

Clarkson


drawerfrontprofile

2"

doorprofile

FINISH AVAILABILITY



CommonStyle

Birch

Autumn 13K 14K 032Rouge 13M 14M 034Saddle 13V 14V 036Sarsaparilla 13N 14N 035

▶7∕ 16" Overlay

▶ Raised Veneer Center Panel▶

3∕ 4" Thick Solid Birch Door Rail▶ Reverse Bevel Profile, No Hardware Required

DO

OR

STY

LES


DOOR STYLESHammond


drawerfrontprofile

2"

doorprofile

FINISH AVAILABILITY



CommonStyle

Oak Wheat 13B 14B 030

▶7∕ 16" Overlay

▶ Flat Veneer Center Panel▶

3∕ 4" Thick Solid Oak Door Rail▶ Reverse Bevel Profile, No Hardware Required

Newberry


drawerfrontprofile

2"

doorprofile

FINISH AVAILABILITY



CommonStyle

Birch

Autumn 13F 14F 032Rouge 13J 14J 034Saddle 13H 14H 036Sarsaparilla 13P 14P 035

▶7∕ 16" Overlay

▶ Flat Veneer Center Panel▶

3∕ 4" Thick Solid Birch Door Rail▶ Reverse Bevel Profile, No Hardware Required

DO

OR

STY

LES


FINISH NAME DESCRIPTIONSt

ain

Autumn Mid-tone stain with warm, copper tones

Rouge Traditional, cinnamon red tones

Saddle Medium, warm brown stain

Sarsaparilla Rich, deep brown stain

Wheat Light stain with golden undertones

Ther

mo

foil™

White A pure white color

Finishing Process

Contractor's Choice offers a variety of cabinet construction and finish options in order to allow for maximum designflexibility. Below are details about wood characteristics to assist you in deciding on a wood type and finish.

The Contractor's Choice finishing process starts with top quality lumber that is sanded down to reach difficult areas beforethe doors are assembled. After assembly, each door is inspected before a toner is applied with a spray. After applying tonerto each door, drawer front, and face frame, a layer of stain is added using a spray finish which is then hand rubbed into thewood for maximum penetration and long-lasting beauty. A UV sealer is then applied during the finishing process to fill thegrain. Finally, a UV topcoat is applied onto the door, providing a protective layer and beautiful, lasting finish. A finalinspection is given at the end of the process to ensure each door is ready for cabinet assembly.

The finish you select for your door style is just as important as the wood type. Each piece of wood will react differently to thefinish material used, resulting in a slight variation in shade within and between cabinets. When natural, light, or tintedfinishes are applied, the natural grain characteristics are apparent. For easy care and lasting beauty, Contractor's Choicecovers interior surfaces of cabinet walls, backs, and shelves with Aristex™ surface, a urethane-coated laminate.

FIN

ISH

DE

SCR

IPTI

ON

SA

ND

PR

OC

ESS

Finish Descriptions


CABINET CONSTRUCTION OPTIONS

STANDARD ALL-PLYWOOD*

CA

BIN

ET

CO

NST

RU

CTI

ON

OP

TIO

NS

SIDES 3∕8" Thick Furniture Board with Matching Interior 3∕ 8" Thick Plywood, Laminated Interior and Exterior Sides

BACK 3∕8" Thick Furniture Board 3∕8" Thick Plywood, Laminated Interior and Exterior Sides

TOP & BOTTOM (Wall) 1∕ 2" Thick Furniture Board 1∕2" Thick Plywood

BOTTOM (Base) 3∕ 8" Thick Furniture Board 3∕8" Thick Plywood, Laminated Interior and Exterior Sides

CORNERS Four Furniture Board Corner BracesTwo Plywood Stretcher Rails, except on B15FH-12,

B18FH-12, B21FH-12, B24FH-12, B30FH-12, B36FH-12,VSB1816, which utilize corner braces

SHELVES (Wall and Tall) Adjustable 3∕ 4" Thick Full-Depth Furniture Board(15 pounds maximum weight per square foot) New

Adjustable 3∕ 4" Thick Full-Depth Plywood(15 pounds maximum weight per square foot) New

SHELVES (Base)Adjustable 3∕ 4" Thick Half-Depth Furniture BoardAdjustable 3∕ 4" Thick Full-Depth Furniture Board

on Full Height Base Cabinets(Exclusions apply as noted throughout the book) New

Adjustable 3∕ 4" Thick Half-Depth PlywoodAdjustable 3∕ 4" Thick Full-Depth Plywood on

Full Height Base Cabinets(Exclusions apply as noted throughout the book) New

TOEKICK3∕8" Thick x 4" High Furniture Board,

Recessed 33∕8", Unfinished(Requires cover: TOEKICK/TOEKICK8)

3∕ 8" Thick x 4" High Plywood,Recessed 33∕8", Unfinished

(Requires cover: TOEKICKPLY/TOEKICKPLY8)

FACE FRAME (Wall) 3∕ 4" x 11∕2" Solid Wood

FACE FRAME (Base) 3∕ 4" x 11∕2" Solid Wood, 3" Center Stile

INTERIORCOMPONENTS Aristex™ Maple Laminate New

HINGES Adjustable, Fully Concealed, Steel Hinges

DRAWER CONSTRUCTION OPTIONS

DR

AW

ER

CO

NST

RU

CTI

ON

OP

TIO

NS STANDARD ALL-PLYWOOD

BOX1∕2" Thick Furniture Board with Aristex™

Natural Maple Laminate1∕2" Thick Hardwood

BOTTOM3∕8" Thick Furniture Board,(Stapled into Front & Back)

3∕ 8" Thick Plywood,(Stapled into Front & Back)

GUIDESSide-Mount, Epoxy-Coated,

Double Rails, Captured on Two Sides,Built-In Drawer Stop

JOINERY Stapled, Butt Joint

DEPTH 20" Deep Base, 18" Deep Vanity

CAPACITY Rated at 75 lbs. Capacity per drawer for all guides

*Depending upon application, plywood components may contain MDF or Particleboard in accordance with ANSI/HPVA HP-1 standards.C

ON

STR

UC

TIO

NSP

EC

IFIC

ATI

ON

S

Construction Specifications


l

l

l

l

l

l

l

l

l

l

11 /2"

11 /2"

3/4"12"

3/8"

35"

22"

4"

3"

3/4" 3/8"

11 /2"

11 /2"

41 /2

"11 /2

" 233/4"

1011/32" l

l

l

l

l

l

l

l

ll

35"

3"

4"

3/4" 3/8"233/4"

11 /2"

11 /2"

13 /4"

11 /2"

41 /2"

101 /8

"10

1 /8"

18" or 21"

3"

30"

4"17

"11 /2

"11 /2

"11 /2

"41 /2

"

3/4" 3/8"

4"

3"

3/4" 3/8"

11 /2"

11 /2"

41 /2

"11 /2

"

233/4" (Base Cabinets) or 21" (Vanity Cabinets)

191 /

2"

321 /

2"

Wall Cabinet Base Cabinet 3-DrawerBase Cabinet

30" HighVanity Cabinet

321∕2" HighBase/Vanity

21"

3"

35"

4"22

"11 /2

"11 /2

"11 /2

"41 /2

"

3/4" 3/8"

12" or

3"

27"

84"

4"47

"

233/4"3/4" 3/8"11 /2

"11 /2

"3"

15"

84"

4"

233/4"3/4" 3/8"11 /2

"

101 /2

"

24"

3"

101 /2

"41 /2

"41 /2

"

41 /2"

13 /4"

13 /4"

11 /2"

35" HighVanity Cabinet

Utility CabinetShelves not included

Single Oven Cabinet

CA

BIN

ET

SPE

CIF

ICA

TIO

NS


Cabinet Specification Reference▶ Number above wall cabinet represents height of

cabinet.

▶ 11∕ 2" Top and Bottom Rails on most cabinets.

▶ 11∕ 2" Vertical Stiles on most cabinets, exceptOCSD Cabinets.

▶ Drawer Box opening heights are 41∕ 2" for smalland 91∕ 2", 93∕ 4", or 101∕ 8" for large (deep) drawers.

7∕ 16" Overlay Door Styles:

▶ 11∕ 16" Reveal around doors (11∕ 16" of Face Frameshows).

▶ Door size for Single Door Cabinets: Frameopening + 7∕ 8"

▶ Door size for Butt Door Cabinets:(Frame opening + 3∕ 4")/2

▶ 41∕ 2" High Drawer opening = 51∕ 8" Drawer Front.

Full Overlay Door Styles:

▶1∕ 4" Reveal around doors (1∕ 4" of Face Frameshows).

▶ Door size for Single Door Cabinets:Frame opening + 21∕ 2"

▶ Door size for Butt Door Cabinets:(Frame opening + 23∕ 8")/2

▶ 41∕ 2" High Drawer opening = 53∕ 4" Drawer Front.

84" High Application84" U

27"

47 "

3"

TOEKICK AREA

27"

W30

PANEL

15"

84" OCSD

TOEKICK AREA

3"3"

24 "

OPENING

PANEL

OPENING

OPENING

21 "

W24

9"11"

15"

W12 W14 W18

11/ 2 "

11/ 2 "

11/ 2 " 11/ 2 "

11/ 2 "

11/ 2 "

13/ 4 "

13/ 4 "

10 1/ 2 "

10 1/ 2 "

41/ 2 "

41/ 2 "

41/ 2 "

17 1/ 2 "

DB

ThickCountertop

TOEKICK AREA

22 "

TOEKICK

B B09

TOEKICK AREA

28 "

11/ 2 "

31"

4"

11/ 2 "

11/ 2 "

11/ 2 "

13/ 4 "

11/ 2 "

10 1/ 8 "

41/ 2 "

10 1/ 8 "

41/ 2 "

90" High Application

DB

TOEKICK

B09

TOEKICK AREA

28 "

ThickCountertop

31"

TOEKICK AREA

22 "

4"

B

90" U

47"

3"

PEDESTAL

27"

W30

33"

3"

PANEL

21"

90" OCSD

PEDESTAL

3"

24"

OPENING

OPENING

OPENING

PANEL

21"

W24

9"11"

15"

W12 W14 W18

11/ 2 "

11/ 2 "

11/ 2 "

11/ 2 "

11/ 2 "

11/ 2 "

11/ 2 "

11/ 2 "

11/ 2 "

11/ 2 "

11/ 2 "

10 1/ 2 "

10 1/ 2 "

10 1/ 8 "

10 1/ "

41/ 2 "

13/ 4 "

41/ 2 "

41/ 2

8

"

41/ 2 "

41/ 2 "

13/ 4 "

13/ 4 "

CA

BIN

ET

SPE

CIF

ICA

TIO

NS


96" High Application

DB

TOEKICK

B09

TOEKICK AREA

28 "

96" U

47"

3"

PEDESTAL

39"

W42

27"

W30

39"

3"

PANEL

27"

96" OCSD

PEDESTAL

3"

24"

OPENING

OPENING

OPENING

PANEL

ThickCountertop

31"

TOEKICK AREA

22 "

4"

B

21"

W24

9"11"

15"

W12 W14 W18

11/ 2 "

11/ 2 "

11/ 2 "

11/ 2 "

11/ 2 "

11/ 2 "

11/ 2 "

11/ 2 "

11/ 2 "

11/ 2 "

11/ 2 "

10 1/ 2 "

10 1/ 2 "

10 1/ 8 "

10 1/ 8 "

41/ 2 "

41/ 2 "

41/ 2 "

13/ 4 "

41/ 2 "41/ 2 "

17 1/ 2 "

13/ 4 "

13/ 4 "

30" High Desk Cabinets

11/ 2 "

11/ 2 "

11/ 2 " 11/ 2 "

11/ 2 "11/ 2 "

30"

26"

4" 4"

17" 17"

3" 3"

41/ 2 "41/ 2 " 41/ 2 "

TOEKICK AREA

TOEKICK AREA

VB VDT_ _B VB

VDT_ _B has Topand Bottom Rail.

Cabinet height is .

11/ 2 "3/4"

63/4 "

ThickCountertop

3/4"

30" High Vanity Cabinets

VB

26"17"

4"

30"

3"

VSB36-42

17"

TOEKICK AREA TOEKICK AREATOEKICK AREA

VDB

ThickCountertop11/ 2 "

11/ 2 "

11/ 2 "

11/ 2 "

11/ 2 "

41/ 2 "

41/ 2 "

41/ 2 "41/ 2 "

93/ 4 "

CA

BIN

ET

SPE

CIF

ICA

TIO

NS


321∕2" High Vanity Cabinets

4"

321/2"

VSB36-4232.5

TOEKICK AREA TOEKICK AREA


11/ 2 "

11/ 2 "

11/ 2 "

41/ 2 "

VSB24-2732.5

41/ 2 "

281/2" 191/2" 191/2"

32"Minimum


VWS

23"

9"Minimum

Totalinstalledheight notto exceed34" perADAguidelines

RVWS11/ 2 "

11/ 2 "

281/2" 251/2"

4"

321/2"

TOEKICK AREA

35" High Vanity Cabinets

31"

4"

35 "

VSB3635-4235

22 "

TOEKICK AREATOEKICK AREA

VDB


11/ 2 "

11/ 2 "

11/ 2 "

41/ 2 " 41/ 2 "

13/ 4 "

10 1/ 8 "

10 1/ 8 "

321∕2" High Base Cabinets (Universal Design Application)

B3032.5-B4832.5SB3032.5-SB3632.5

TOEKICK AREA TOEKICK TOEKICK AREA TOEKICK

ThickCountertop

191/2""3 "3

B1232.5-B2132.5 B2432.5DD B3032.5FH SF3632.5

DB1232.5-DB2432.5

TOEKICK AREA TOEKICK AREA TOEKICK AREATOEKICK AREA

11/ 2 "

11/ 2 "

11/ 2 "4"

11/ 2 "

B2432.5DDFHB2732.5

41/ 2 " 41/ 2 " 41/ 2 " 41/ 2 "

41/ 2 " 41/ 2 "

41/ 2 " 41/ 2 "

13/ 4 "32 1/ 2 " 191/2" 191/2" 191/2"191/2"251/2" 251/2"281/2"

9"

83/4"

▶ 321∕ 2" High Cabinets are designed to comply withADA (Americans with Disabilities Act)requirements of a 34" high overall counterheight, including a 11∕ 2" counter top.

▶ Refer to ADA guidelines for more details ondesigning in small spaces where extra width forturning radius may be required.

▶ For Vanity Sink Base Cabinets, see page 34. For aVanity Wall Sink Cabinet, see page 42.

CA

BIN

ET

SPE

CIF

ICA

TIO

NS


Wall Cabinets, 12" High, 12" Deep

12"

12"

30", 36", or 39"

W3012W3612W3912

The following note appliesto all Wall cabinets withinthis book.

▶ Wall cabinets with a singledoor may be flipped for aleft or right hinge preference.

▶ Shelves not available with cabinetsless than 24" in height.


12"

14"

21" or 24"

12"

14"

30", 33", 36", or 39"

W2114W2414

W3014W3314W3614W3914

▶ Shelves not available withcabinets less than 24" inheight.


12"

18"

21" or 24"

12"

18"

30", 33", 36", 39", or 42"

W2118W2418

W3018W3318W3618W3918W4218


WA

LLC

AB

INE

TS|

STR

AIG

HT



18"

15"30" or 36"

W301815W361815



24"

12" 21" or 24"

12"

24"

30", 33", 36", 39", or 42"

W2124W2424

W3024W3324W3624W3924W4224

▶ Center shelf support clipincluded on Wall Double Doorcabinets with center mullion.

▶ One adjustable shelf.


24"

15"30" or 36"

W302415W362415



WA

LLC

AB

INE

TS|

STR

AIG

HT



12"

30"

9", 12", 15", 18", 21", or 24"

12"

30"

27", 30", 33", 36", 39", 42", or 48"

W0930W1230W1530W1830W2130W2430

W2730W3030W3330W3630W3930W4230W4830

▶ Center shelf support clipincluded on Wall Double Doorcabinets with center mullion

▶ Two adjustable shelves.


12"

36"

9", 12", 15", 18", 21", or 24"

12"

36"

27", 30", 33", 36", 39", 42",

45", or 48"

W0936W1236W1536W1836W2136W2436

W2736W3036W3336W3636W3936W4236W4536W4836




15"

36"

15", 18", or 24"

36"

15"30"

W153615W183615W243615

W303615



WA

LLC

AB

INE

TS|

STR

AIG

HT



12"

42"

9", 12", 15", 18", 21", or 24"

42"

12" 27", 30", 33", 36", 39", 42",

45", or 48"

W0942W1242W1542W1842W2142W2442

W2742W3042W3342W3642W3942W4242W4542W4842


▶ Three adjustable shelves.


42"

15" 15", 18", or 24"

42"

15"30"

W154215W184215W244215

W304215



Refrigerator Wall Cabinets, 12" High, 23 3∕4" Deep

233/4"

12"

36" or 39"

RW3612RW3912

▶ Shelves not available incabinets less than 24" inheight.

▶ Cabinets must be supported onthree surfaces when mounted.

▶ When designing for built-inrefrigerators, be sure to usenecessary Fillers to provideproper clearance.

WA

LLC

AB

INE

TS|

STR

AIG

HT



233/4"

18"

36" or 39"

RW3618RW3918

▶ Shelves not available incabinets less than 24" inheight.




233/4"

24"

36" or 39"

RW3624RW3924

▶ Shelves not included.



WA

LLC

AB

INE

TS|

STR

AIG

HT


Diagonal Corner Wall Cabinets, 24" High, 12" Deep

24"

24"

12"

1631/32"

2113/32"

8 1/16"

177/8"

DC2424 DC2424TOP VIEW


▶ All Diagonal Wall cabinets arereversible.

▶ When installing, DC cabinetsmust be attached to at leastone run of cabinets and bothback walls.

▶ All full overlay doors aresmaller to allow for properdoor opening.

Diagonal Corner Wall Cabinets, 30" High, 12" Deep

30"

24"

12"

1631/32"

2113/32"

8 1/16"177/8"

DC2430 DC2430TOP VIEW





Diagonal Corner Wall Cabinets, 36" High, 12" & 15" Deep

36"

24"

12"

1631/32"

2113/32"

8 1/16"

177/8"

27"

15"

1631/32"

2533/64"

8 1/16"

207/8"

DC2436DC2736

DC2436TOP VIEW

DC2736TOP VIEW





WA

LLC

AB

INE

TS|

CO

RN

ER


Diagonal Corner Wall Cabinets, 42" High, 12" & 15" Deep

42"

24"

12"

1631/32"

2113/32"

8 1/16"

177/8"

15"

27"

1631/32"

2533/64"8 1/16"

207/8"

DC2442DC2742

DC2442TOP VIEW

DC2742TOP VIEW





WA

LLC

AB

INE

TS|

CO

RN

ER


Wall Corner Cabinet Installation Charts

FFFF

Blind Opening

Mullion

Door Opening

Wall Corner Cabinet

AdjacentWallCabinet

X

YZ

W

Door OpeningMullion

Cabinet Width

BlindOpening

Full Overlay Square Corner Wall Cabinet Information

Full Overlay Styles

X Y Z W

ActualCabinetWidth Min. Pull

Min. Pullw/Hardware Max. Pull

Min. FillerRequired

Min. Filler Requiredw/Hardware

Min. Pull From WallTo End of Cabinet

Max Pull From WallTo End of Cabinet

SC24_ _ 24" 1" 21∕ 2" 33∕ 4" 1" 21∕ 2" 25" 273∕ 4"

SC30_ _ 30" 1" 21∕ 2" 33∕ 4" 1" 21∕ 2" 31" 333∕ 4"

SC36_ _ 36" 1" 21∕ 2" 33∕ 4" 1" 21∕ 2" 37" 393∕ 4"

SC42_ _ 42" 1" 21∕ 2" 33∕ 4" 1" 21∕ 2" 43" 453∕ 4"

SC48_ _ 48" 1" 21∕ 2" 33∕ 4" 1" 21∕ 2" 49" 513∕ 4"

7∕16" Overlay Square Corner Wall Cabinet Information

7∕ 16" Overlay Styles

X Y Z W



Min. FillerRequired




SC24_ _ 24" 1∕ 2" 2" 33∕ 4" 1∕ 2" 2" 241∕ 2" 273∕ 4"

SC30_ _ 30" 1∕ 2" 2" 33∕ 4" 1∕ 2" 2" 301∕ 2" 333∕ 4"

SC36_ _ 36" 1∕ 2" 2" 33∕ 4" 1∕ 2" 2" 361∕ 2" 393∕ 4"

SC42_ _ 42" 1∕ 2" 2" 33∕ 4" 1∕ 2" 2" 421∕ 2" 453∕ 4"

SC48_ _ 48" 1∕ 2" 2" 33∕ 4" 1∕ 2" 2" 481∕ 2" 513∕ 4"

Square Corner Wall Door and Opening SizesSKU 7∕16" Overlay Door Full Overlay Door Door Opening

SC3024 157∕ 8" x 217∕ 8" 171∕ 2" x 231∕ 2" 15" x 21"

SC3624 217∕ 8" x 217∕ 8" 231∕ 2" x 231∕ 2" 21" x 21"

SC2430 97∕ 8" x 277∕ 8" 111∕ 2" x 291∕ 2" 9" x 27"

SC3030 157∕ 8" x 277∕ 8" 171∕ 2" x 291∕ 2" 15" x 27"

SC3630 217∕ 8" x 277∕ 8" 231∕ 2" x 291∕ 2" 21" x 27"

SC4230 127∕ 8" x 277∕ 8" 141∕ 2" x 291∕ 2" 12" x 27"

SC4830 157∕ 8" x 277∕ 8" 171∕ 2" x 291∕ 2" 15" x 27"

SC2436 97∕ 8" x 337∕ 8" 111∕ 2" x 351∕ 2" 9" x 33"

SC3036 157∕ 8" x 337∕ 8" 171∕ 2" x 351∕ 2" 9" x 33"

SC3636 217∕ 8" x 337∕ 8" 231∕ 2" x 351∕ 2" 18" x 33"

SC2442 97∕ 8" x 397∕ 8" 111∕ 2" x 411∕ 2" 9" x 39"

SC3042 157∕ 8" x 397∕ 8" 171∕ 2" x 411∕ 2" 15" x 39"

SC3642 217∕ 8" x 397∕ 8" 231∕ 2" x 411∕ 2" 21" x 39"

WA

LLC

AB

INE

TS|

CO

RN

ER


Square Corner Wall Cabinets, 24" High, 12" Deep

30" or 36"

24"6"

12"

6"

SC3024SC3624

TOP VIEWSC (RIGHT)

TOP VIEWSC (LEFT)


▶ 3" Filler is included.

▶ Hinging determines location ofthe blind. Door attaches toblind panel.

▶ Cabinets are reversible.

▶ Cover panel shipped withcabinet for field installation tocover 6" blind opening.

▶ Reference Installation Chartsfor proper sizing identification,see page 21.


30"6"

12"

6"

24", 30", or 36"

12"

6"30"

6"

42" or 48"

SC2430SC3030SC3630

SC4230SC4830

TOP VIEWSC (RIGHT)

TOP VIEWSC (LEFT)

TOP VIEWSC (RIGHT)

TOP VIEWSC (LEFT)







WA

LLC

AB

INE

TS|

CO

RN

ER



6"36"

12"

6"

24", 30", or 36"

SC2436SC3036SC3636

TOP VIEWSC (RIGHT)

TOP VIEWSC (LEFT)








12"

6" 42"6"

24", 30", or 36"

SC2442SC3042SC3642

TOP VIEWSC (RIGHT)

TOP VIEWSC (LEFT)







WA

LLC

AB

INE

TS|

CO

RN

ER


Base Cabinets, 35" High, 23 3∕4" Deep

35"

9"233/4"

35"

233/4"

12", 15", 18", 21", or 24"

B09 B12B15B18

B21B24

35"

27"233/4"

35"

233/4"30", 33", 36",

39", 42", 45", or 48"

B27 B30B33B36B39

B42B45B48

▶ B09 is a Full Height door anddoes not include an adjustableshelf or vertical partition.

▶ Includes one adjustable 3∕ 4"thick, half-depth shelf.

Base Cabinet Tray Divider, 35" Deep, 23 3∕4" Deep

35"

233/4"9"

B09TD

▶ B09TD is a Full Height doorand includes an installedchrome tray divider.

BA

SEC

AB

INE

TS|

STR

AIG

HT


Base Cabinets with Full Height Doors, 35" High, 12" Deep

35"

12"15", 18",

21", or 24"

12"

35"

30" or 36"

B15FH-12B18FH-12B21FH-12B24FH-12

B30FH-12B36FH-12

▶ Includes one 3∕ 4" full-depthadjustable shelf.

Base Wastebaskets, 35" High, 23 3∕4" Deep

233/4"

35"

18"

BWB18

▶ BWB18 has two 35-quart Pull-Out wastebaskets on FullExtension guides.

▶ Natural maple wastebasketsupport.

BA

SEC

AB

INE

TS|

STR

AIG

HT


Sink/Range Bases, 35" High, 23 3∕4" Deep

35"

24"22"

22"

FP

233/4"

FP

25"

22"

35"

27"233/4"

SB24 SB27

35"

22"FP

FP

233/4"

30", 33", 36", 39", 42", or 48"

28", 31", 34", 37", 40", or 46"

233/4"

38"

22"

35"

60"

SB30SB33SB36

SB39SB42SB48

SB60

▶ FP = False Panel.

▶ It may be necessary to modifythe corner braces/stretcher railswith some sink applications.

▶ Shelf not included; interiors willinclude shelf clip holes on allSink Bases.

▶ Front-Onlys are not available inSink Bases.

Removable Sink Bases with Front Panel, 35" High, 23 3∕4" Deep

63/4"

233/4"

281/4"

FP

FP

30"-36"

RSB30RSB36

▶ Top false panel section attachesto adjacent cabinets, whilebottom section and floor areremovable for accessibility.

BA

SEC

AB

INE

TS|

SIN

K


Sink/Range Fronts, 35" High

35"

30"

35"

36"

35"

30" or 36"

PARTIAL OVERLAY

SF30

PARTIAL OVERLAY

SF36

FULL OVERLAY

SF30SF36

▶ Sink Base floor included with allunits.

▶ Trimmable 3" each side onpartial overlay styles. Nottrimmable on full overlay styles.

▶ SF30 single door only availablepartial overlay styles.

Sink Front Corners, 35" High

35"

36" or 42"

SFC36SFC42

Wall Width Max. Sink WidthSFC36 36" x 36" 253∕ 4"

SFC42 42" x 42" 341∕ 4"

36" 36"

5029/32"409/64"

233/4" 233/4"

183/8"

175/16"

42"42"

4425/64"

233/4" 233/4"

267/8"

5925/64"

2513/16"

SFC36TOP VIEW

SFC42TOP VIEW

▶ Sink Base floor included with allunits.

▶ Toekick is not attached, shipsloose.

▶ For sufficient dishwasher doorclearance and loading/unloading space, a 15" widebase cabinet is recommendedfor use between sink basediagonal corner cabinet anddishwasher.

▶ Floor dimensions:SFC36 – 3∕ 8" x 36" x 36".SFC42 – 3∕ 8" x 42" x 42".

BA

SEC

AB

INE

TS|

SIN

K/

DR

AW

ER


Three Drawer Bases, 35" High, 23 3∕4" Deep

233/4"

35"

12", 15", 18", 21", 24", 30", or 36"

DB12DB15DB18DB21

DB24DB30DB36

Square Corner/Base Roto Easy Reach Cabinets, 35" High, 23 3∕4" Deep

35"

36"36" 217/8"

233/4" 233/4"

203/16"

2241/64"

SCER36 TOP VIEW

▶ One knuckle hinge door.

▶ Includes magnetic catch.

▶ Decorative hardware must becountersunk to preventscratching of adjacent cabinetsand face frame of SCER.

Square Corner Rotos, 35" High

35"

1829/32"

3023/32"

3023/32"

121/4"

121/4"

615/64"

297/8"

SCR36 SCR36TOP VIEW

▶ One rotating door.

▶ Two rotating white shelves.

▶ Nominal gap of 1∕ 4" on all sidesof door.

▶ SCR36 has 27" diameter shelfand holds 60 lbs. per shelf.

▶ When ordering All-Plywoodconstruction, top and bottomwill utilize plywood, but drummaterial does not change.

BA

SEC

AB

INE

TS|

DR

AW

ER

/C

OR

NE

R


Base Corner Cabinet Installation Charts

FFBlind Opening

MullionFF

Door Opening

Base Corner Cabinet

Y

X

W

Z

AdjacentBaseCabinet

DWR OpeningDWR Opening

Door Opening Door Opening

Mullion

Cabinet Width

Full Overlay Base Corner Cabinet Information

Full Overlay Styles

X Y Z W



Min. FillerRequired




BC36 27" 93∕ 4" 111∕ 4" 121∕ 2" 1" 21∕ 2" 363∕ 4" 391∕ 2"

BC42 36" 33∕ 4" 51∕ 4" 91∕ 2" 1" 21∕ 2" 393∕ 4" 451∕ 2"

BC48 45" 0" 3∕ 4" 5" 1" 21∕ 2" 45" 50"

BC51 48" 0" 0" 31∕ 2" 1" 21∕ 2" 48" 511∕ 2"

7∕16" Overlay Base Corner Cabinet Information


X Y Z W



Min. FillerRequired




BC36 27" 91∕ 4" 103∕ 4" 121∕ 2" 1∕ 2" 2" 361∕ 4" 391∕ 2"

BC42 36" 31∕ 4" 43∕ 4" 91∕ 2" 1∕ 2" 2" 391∕ 4" 451∕ 2"

BC48 45" 0" 1∕ 4" 5" 1∕ 2" 2" 45" 50"

BC51 48" 0" 0" 31∕ 2" 1∕ 2" 2 48" 511∕ 2"

Base Corner Door, Drawer Front, and Opening Sizes

SKU 7∕16" Overlay Door7∕ 16" OverlayDrawer Front Full Overlay Door

Full Overlay DoorDrawer Front Door Opening Drawer Opening

BC36 97∕ 8" x 227∕ 8" 97∕ 8" x 51∕ 8" 111∕ 2" x 241∕ 8" 111∕ 2" x 53∕ 4" 9" x 22" 9" x 41∕ 2"

BC42 12 7∕ 8" x 227∕ 8" 127∕ 8" x 51∕ 8" 141∕ 2" x 241∕ 8" 141∕ 2" x 53∕ 4" 12" x 22" 12" x 41∕ 2"

BC48 173∕ 8" x 227∕ 8" 173∕ 8" x 51∕ 8" 19" x 241∕ 8" 19" x 53∕ 4" 161∕ 2" x 22" 161∕ 2" x 41∕ 2"

BC51 187∕ 8" x 227∕ 8" 187∕ 8" x 51∕ 8" 201∕ 2" x 241∕ 8" 201∕ 2" x 53∕ 4" 18 " x 22" 18" x 41∕ 2"

BA

SEC

AB

INE

TS


Base Corner Cabinets, 35" High, 23 3∕4" Deep

233/4" 27"

35"

6"9"

35"9"

36"233/4"

12"

BC36 BC42

35"9"

45"233/4"

161/2"

35"9"

48"233/4"

18"

BC48 BC51

▶ Includes one adjustable 3∕ 4"thick, half-depth shelf.

▶ All Base Corner cabinets arereversible from left blind toright blind.

▶ 3" Filler is included with allBase Corner cabinets andshipped under Toekick or incabinet.

▶ To ensure proper door/drawerclearance, we recommend youdo not install appliances nextto the blind.

▶ One door and one drawer.

▶ Cabinets are designed to usesame amount of wall spacedesignated in the skunomenclature.

▶ Cover panel shipped withcabinet for field installation tocover blind opening.

▶ Reference Installation Chartsfor proper size andidentification. See page 0.

BA

SEC

AB

INE

TS|

CO

RN

ER


Oven Cabinets, 84" High, 23 3∕4" Deep

84"

233/4" 33"15" FrameOpeningHeight

27"

24"

41/2"

41/2"41/2"

41/2

2

"41/ "

101/ "

Max Cut-out311/2" x 59" (Shaded)

Toekick 4"

OCSD33

101/2"

OCSD33

▶ Two doors and three drawers.

▶ Oven shelf support kitincluded.

▶ Shelves not available on thiscabinet.

▶ Back of cabinet scored for easyback removal if needed whenoven used is deeper thancabinet can accommodate.

▶ Cabinet features concealedface mount hinges.


90"

233/4" 33" 21" FrameOpeningHeight

Pedestal

41/2"

41/2"

41/2"

27"

24"

101/2"


OCSD3390

2101/ "

OCSD3390

▶ Two doors and three drawers.


▶ All 90" cabinets are shippedas an 86" cabinet withunfinished Loose ToekickSub Assembly unattached.

▶ Additional material may beneeded to cover unfinishedLoose Toekick Sub Assembly.

▶ Shelves not available on thiscabinet.

▶ Refer to Loose Toekick SubAssembly Installationinstructions for cabinetinstallation.



TALL

CA

BIN

ETS



96"

233/4" 33"

27" FrameOpeningHeight

27"

24"

101/2"

Pedestal

41/2"

41/2"

41/2"


OCSD3396

2101/ "

OCSD3396

▶ Two doors, one adjustableshelf, and three drawers.


▶ All 96" cabinets are shippedas a 92" cabinet withunfinished Loose ToekickSub Assembly unattached.





Utility Cabinets, 84" High, 12" and 23 3∕4" Deep

12"

84"

18"

84"

233/4" 15", 18", or 24"

84"

233/4" 30"

U1812* U15*U18*U24*

U30

*Specify L or R on all single door Utility cabinets.

▶ 84" high Utility cabinetsinclude one fixed shelfbetween doors.

▶ Shelves not included in Utilitycabinets. For shelf and Roll Trayoptions see pages 51-52.

▶ Refer to the CabinetSpecifications Section for dooropening dimensions.

TALL

CA

BIN

ETS



90"

233/4" 15", 18", or 24"

90"

233/4" 30"

U1590*U1890*U2490*

U3090




▶ All 90" high Utility cabinets areshipped as an 86" cabinet withunfinished Loose Toekick SubAssembly.





96"

233/4" 15", 18", or 24"

96"

233/4" 30"

U1596*U1896*U2496*

U3096




▶ All 96" Utility cabinets areshipped as a 92" cabinet withunfinished Loose Toekick SubAssembly.



▶ Refer to Loose Toekick SubAssembly instructions forcabinet installation.

TALL

CA

BIN

ETS


Vanity Bases, 30" High, 21" Deep

30"

21"

12", 15", 18", or 21"

VB12VB15VB18VB21

▶ Includes one 3∕ 4" thick half-depth adjustable shelf.

Vanity Sink Base, 30" High, 18" Wide, 16" Deep

16" 16"18"

14"

30"

VSB1816


▶ 16" wide and 14" deep spacefor sink opening.

▶ One full height door.

▶ Vanity interiors are not drilledfor shelf clip holes, nor do theyinclude a shelf.VA

NIT

YC

AB

INE

TS


Vanity Sink Bases, 30" High, 21" Deep

21"

19"

FP

19"

30"

21" 21"

19"

FP 30"

22"24" 21"

19"

FP

25"

30"

27"

VSB21 VSB24 VSB27

30"

21"

19"

28" or 31"

FP

FP

30" or 33"

FP

30"

21"

19"

211/2"181/2" or

36" or 42"21" 48" or 60"

26" (48") or 32" (60")

VSB30VSB33

VSB36VSB42

VSB48VSB60



▶ VSB24 has butt doors on alldoor styles.

▶ Vanity interiors are not drilledfor shelf clip holes, nor do theyinclude a shelf.

Vanity Sink Bases, 35" High, 21" Deep

21"

19"

FP

19"

35"

21" 21"

19"

FP

22"

35"

24" 21"

19"FP

25"

35"

27"

VSB2135 VSB2435 VSB2735

35"

21"28" or 31"

19"FP

FP

30" or 33"

35"

21"

19"

or

FP

211/2"181/2"

36" or 42" 21"

19"

35"

48" or 60"26" (48") or 32" (60")

VSB3035VSB3335

VSB3635VSB4235

VSB4835VSB6035



▶ VSB2435 has butt doors on alldoor styles.

▶ Vanity interiors are not drilledfor shelf clip holes, nor do theyinclude a shelf. VA

NIT

YC

AB

INE

TS


Vanity Three Drawer Bases, 30" High, 21" Deep

21"

30"

12", 15", or 18"

VDB12VDB15VDB18

Vanity Three Drawer Bases, 35" High, 21" Deep

21"

35"

12" or 18"

VDB1235VDB1835

Vanity Drawers Trimmable, 21" Deep (Trimmable 3") New

63/4"

27" or 33"21"

VDT30BVDT36B

▶ Cabinets may not featurematching exterior laminate, soinstallation between twoadjacent cabinets, walls, and/orpanels is recommended.

▶ Face frame trimmable 3"overall, 11∕ 2" on each side.

▶ VDT unit not constructed ofAll-Plywood.

VAN

ITY

CA

BIN

ETS


Universal Design Notes321∕2" high cabinets are designed to comply with ADA (Americans with Disabilities Act) requirements of a34" high overall counter height, including a 11∕2"countertop.

Base Cabinets, 32 1∕2" High, 23 3∕4" Deep

233/4"

321/2"

12", 15", 18" or 21" 24"233/4"

321/2"

B1232.5B1532.5B1832.5B2132.5

B2432.5DD

27"233/4"

321/2"

233/4"

321/2"

30", 33", 36", or 48"

B2732.5 B3032.5B3332.5B3632.5B4832.5

▶ Includes one 3∕ 4" thick half-depth adjustable shelf.

Base Cabinets with Full Height Doors, 32 1∕2" High, 23 3∕4" Deep

24"233/4"

321/2"

233/4"

321/2"

30"

B2432.5DDFH B3032.5FH

▶ Includes one 3∕ 4" thick full-depth adjustable shelf.

UN

IVE

RSA

LD

ESI

GN

CA

BIN

ETS


Sink Base Cabinets, 32 1∕2" High, 23 3∕4" Deep

FP

FP

30" or 36"233/4"

321/2"

SB3032.5SB3632.5


▶ It may be necessary to modifythe corner braces with somesink applications.


Removable Sink Bases with Front Panel, 32 1∕2" High, 23 3∕4" Deep

253/4"

63/4"

233/4"

FP

FP

30"-36"

RSB3032.5RSB3632.5

▶ Top false panel section attachesto adjacent cabinets, whilebottom section and floor areremovable for accessibility.

Sink Fronts, 32 1∕2" High

36"FP

FP

321/2"

36"

321/2"

PARTIAL OVERLAY FULL OVERLAYSF3032.5 SF3632.5


▶ Sink Base Floor included withall units.

▶ Trimmable 3" each side onPartial Overlay; not trimmableon Full Overlay.

UN

IVE

RSA

LD

ESI

GN

CA

BIN

ETS


Sink Unit Cabinets with Front Panel, 32 1∕2" High

26" or 32"30" or 36"

321/2"

281/2"

161/2"

103/8"

133/8"

SU3032.5SU3632.5

▶ 26" and 32" wide and 161∕ 2"deep space for sink opening.

▶ Shipped unassembled.

▶ Removable front panel.

▶ Do not use or install as afreestanding unit.

▶ It may be necessary to modifythe corner braces with somesink applications.

▶ Front panel does not include adoor style profile.

▶ Not available in All PlywoodConstruction.

Three Drawer Base Cabinets, 32 1∕2" High, 23 3∕4" Deep

233/4"

321/2"

12", 15", 18", or 24"

DB1232.5DB1532.5DB1832.5DB2432.5

Square Corner Roto Base Cabinet, 32 1∕2" High

321/2"

121/4"

121/4"

3023/32"

3023/32"

1829/32"

297/8"

615/64"

SCR3632.5 TOP VIEW

▶ Two rotating 27" diameterwhite shelves with a 60 lb. loadcapacity per shelf.

▶ One rotating door.

▶ Nominal gap of 1∕ 4" on all sidesof door.

▶ When ordering All-Plywoodconstruction, top and bottomwill utilize particleboard, butdrum material does notchange.

UN

IVE

RSA

LD

ESI

GN

CA

BIN

ETS


Universal Base Corner Cabinet Installation Charts

FFBlind Opening

MullionFF

Door Opening

Base Corner Cabinet

Y

X

W

Z

AdjacentBaseCabinet

DWR OpeningDWR Opening

Door Opening Door Opening

Mullion

Cabinet Width

Full Overlay Universal Base Corner Cabinet Information

Full Overlay Styles

X Y Z W



Min. FillerRequired




BC3632.5 27" 93∕ 4" 111∕ 4" 121∕ 2" 1" 21∕ 2" 363∕ 4" 391∕ 2"

BC4232.5 36" 33∕ 4" 51∕ 4" 91∕ 2" 1" 21∕ 2" 393∕ 4" 451∕ 2"

BC4832.5 45" 0" 3∕ 4" 5" 1" 21∕ 2" 45" 50"

7∕16" Overlay Universal Base Corner Cabinet Information


X Y Z W



Min. FillerRequired




BC3632.5 27" 91∕ 4" 103∕ 4" 121∕ 2" 1∕ 2" 2" 361∕ 4" 391∕ 2"

BC4232.5 36" 31∕ 4" 43∕ 4" 91∕ 2" 1∕ 2" 2" 391∕ 4" 451∕ 2"

BC4832.5 45" 0" 1∕ 4" 5" 1∕ 2" 2" 45" 50"

UN

IVE

RSA

LD

ESI

GN

CA

BIN

ETS


Base Corner Cabinets, 32 1∕2" High, 23 3∕4" Deep

233/4" 27"

6"9"

321/2"9"

36"233/4"

12"

321/2"9"

45"233/4"

161/2"

321/2"

BC3632.5 BC4232.5 BC4832.5

▶ Includes one 3∕ 4" thick full-depth adjustable shelf.

▶ All Base Corner Cabinets arereversible from left blind toright blind.

▶ 3" filler is included with all BaseCorner Cabinets and shippedunattached.

▶ To ensure proper door/drawerclearance we recommend youdo not install appliances nextto the blind.

▶ Adjoining run of cabinets willcover blind opening.

▶ One door and one drawerinstalled on each Base CornerCabinet.

▶ Base Corner Cabinets aredesigned to use same amountof wall space designated in theSKU nomenclature, and may bepulled up to maximum amounton chart to accommodate odddimensions in a kitchen.

▶ For minimum and maximumpull dimensions, refer toallowable minimum andmaximum pull dimensionsprovided.

Vanity Sink Bases 32 1∕2" High, 21" Deep

21"

19"

FP

22"

321/2"

24" 21"

19"FP

25"

321/2"

27"

321/2"

21"28" or 31"

19"FP

FP

30" or 33"

VSB2432.5 VSB2732.5 VSB3032.5VSB3332.5

321/2"

21"

19"

or

FP

181/2" 211/2"

36" or 42"21"

19"

321/2"

48" or 60"26" (48") or 32" (60")

VSB3632.5VSB4232.5

VAB4832.5VSB6032.5

▶ FP = False Panel

▶ It may be necessary to modifythe corner braces in some sinkapplications.

▶ VSB2432.5 has butt doors onall door styles.


UN

IVE

RSA

LD

ESI

GN

CA

BIN

ETS


Vanity Wall Sink Cabinets, 23" High New

23"

203/16" 29", 32", 35", or 41"

VWS2923VWS3223VWS3523VWS4123

▶ Recommended installationheight of 321∕ 2" to allowsufficient toe clearance forUniversal Design stand-alonevanity applications as a wallhanging unit.

▶ Sink Opening Dimensions:Depth: 163∕ 4"Widths: VWS2923 = 243∕ 16"

VWS3223 = 273∕ 16"VWS3523 = 303∕ 16"VWS4123 = 363∕ 16"

▶ Cabinet construction will beAll-Plywood.

Removable Vanity Wall Sink Cabinets, 32 1∕2" High, 21" Deep New

21"

321/2"

30", 33", 36", or 42"

RVWS3032RVWS3332RVWS3632RVWS4232

▶ Must be ordered with VanityWall Sink Cabinet (VWS). Notdesigned to be a stand-aloneunit.

▶ Two plywood mending platesincluded to mount RVWS toVWS.

▶ Able to be removed forhandicap accessible use.

UN

IVE

RSA

LD

ESI

GN

CA

BIN

ETS


Scribe Moulding

3/4"

1/4"

MSW8PSMSW8

Outside Corner Moulding – 90°

3/4"

3/4"

1/4"

MOCW8

▶ Use to create a finished look onends of cabinet runs.

Trim Moulding

3/4"

1"

MTW8PSMTW8

▶ Can be used to hide seams instacked cabinet applications.

MO

ULD

ING

SA

ND

TRIM

Finished edges indicated by bold lines on side view drawings.


Crown Moulding

11/2 "

111/16"3"

3/4"

13/4"13/4"

MCROWN8 (1 - 8' pc)

PSMCROWN8 (1 - 8' pc)Full Overlay

MFOLCR8 (1 - 8' pc)

PSMFOLCR8 (1 - 8' pc)

23/8"

317/32"

Tall

MTCROWN8 (1 - 8' pc)

PSMTCROWN8 (1 - 8' pc)

▶ Remember to order extraMouldings when working withmitered corners.

▶ At minimum, leave a 3" revealat the end of a run to allowMoulding and countertopample clearance to return backto the wall.

MO

ULD

ING

SA

ND

TRIM



Cove Moulding

3/4"

3/4"

MCV8 (1 - 8' pc)

Quarter Round Moulding

11/16"

11/16"

3/16"

MQR8 (1 - 8' pc)

PSMQR8 (1 - 8' pc)

Batten Moulding

1/4"

13/16"

MBAT8 (1 - 8' pc)

MO

ULD

ING

SA

ND

TRIM



Fillers

3/4"

96"

1/4"

321/2"31"42"80"or

96"

3"

31"42"or

96"

6"

F14X96 FBC3X332.5 F331F342F380F396

F631F642F696

▶ All Fillers finished on front andtwo long edges.

▶ All Fillers are 3∕ 4" thick.

▶ F14X96 is 1∕ 4" thick. Designedto fill space between adjacentcabinets. Finished 1∕ 4" on frontand 3∕ 4" all edges (backs arenot finished).

Valances Straight, 5" High

V549STV573ST

Model LengthV549ST 49"V573ST 73"

▶3∕ 4" thick.

▶ Valances not finished on backor ends.


MO

ULD

ING

SA

ND

TRIM


Panels

35"

11/2"

233/4"

35"

3"

233/4"

PEPR1.535PEPR335

PEPRPLY1.535PEPRPLY335

84" or 96"

233/4"

3/4"

84" or 96"

233/4"

11/2"

96"

30"

3"

35"

24"

3/8"

PREF2384PREF2396

PREPRP1.584PREPRP1.596

PREPR33096PREPRPLY33096

PSFEPPSFEPPLY

Panel Description Size (T x W x H) Edge Finish Color Side 1 Color Side 2 Finish

PEPR1.535Aristex™ 3∕8"End Panelw/11∕ 2" Stile

11∕ 2" x 233∕ 4" x 35" Front Long Exterior Interior Laminate

PEPR335Aristex™ 3∕8"End Panel w/3"Stile

3" x 233∕ 4" x 35" Front Long Exterior Interior Laminate

PEPRPLY1.535Plywood 3∕ 8"End Panelw/11∕ 2" Stile

11∕ 2" x 233∕ 4" x 35" Front Long Exterior Interior Laminate

PEPRPLY335Plywood 3∕ 8"End Panel/ StileComplete

3" x 233∕ 4" x 35" Front Long Exterior Interior Laminate

PREF2384Particle BoardRefrigeratorEnd Panel

3∕ 4" x 233∕ 4" x 84" 1 Long Exterior Exterior Veneer

PREF2396Particle BoardRefrigeratorEnd Panel

3∕ 4" x 233∕ 4" x 96" 1 Long Exterior Exterior Veneer

PREPRP1.584Plywd. 3∕ 8"RefrigeratorEnd Panelw/11∕ 2" Stile

11∕ 2" x 233∕ 4" x 84" Front Long Exterior Exterior Laminate

PREPRP1.596Plywd. 3∕ 8"RefrigeratorEnd Panelw/11∕ 2" Stile

11∕ 2" x 233∕ 4" x 96" Front Long Exterior Exterior Laminate

PREPR33096

VeneeredFurniture BoardRefrigerator 3∕ 4"End Panel w/3"Stile

3" x 30" x 96" Front Long Exterior Exterior Veneer

PREPRPLY33096Plywood 3∕ 4"End Panel w/3"Stile

3" x 30" x 96" Front Long Exterior Exterior Veneer

PSFEP Aristex™ SinkEnd Panel

3∕ 8" x 24" x 35" None Exterior Interior Laminate

PSFEPPLY Aristex™ SinkEnd Panel

3∕ 8" x 24" x 35" None Exterior Interior Laminate

▶ Plywood may contain MDFor particleboard in its corein accordance withANSI/HPVA HP-1 standards.

MO

ULD

ING

SA

ND

TRIM


Stock Panels

36"

48"

GRAINDIRECTION

96"

48"

GRAINDIRECTION

GRAINDIRECTION

96"

35"

PA4836P4836

PA4896P4896

PP9635


PA4836 Stock Panel - Aristex™ Laminate 1∕ 4" x 48" x 36" None Exterior Raw Laminate

PA4896 Stock Panel - Aristex™ Laminate 1∕ 4" x 48" x 96" None Exterior Raw Laminate

PP9635 Stock Panel - Veneer 3∕ 16" x 96" x 35" None Exterior Raw Veneer

P4836 Stock Panel - Veneer 3∕ 16" x 48" x 36" None Exterior Raw Veneer

P4896 Stock Panel - Veneer 3∕ 16" x 48" x 96" None Exterior Raw Veneer


MO

ULD

ING

SA

ND

TRIM


Veneer End Panels

30" - 96"

111/4", 141/4", or 23"

EPV1130 (1/ctn.)EPV1142 (1/ctn.)EPV1442 (1/ctn.)

EPV2335 (1/ctn.)EPV2384 (1/ctn.)EPV2396 (1/ctn.)


EPV1130 Wall End Panel for 12" Depth 3∕ 16" x 111∕ 4" x 30" None Exterior Raw Veneer



EPV2335 Base End Panel 3∕ 16" x 23" x 35" None Exterior Raw Veneer

EPV2384 Utility End Panel 3∕ 16" x 23" x 84" None Exterior Raw Veneer

EPV2396 Utility End Panel 3∕ 16" x 23" x 96" None Exterior Raw Veneer

▶ End Panels are shipped one percarton. Not sold in pairs.

▶ EPV1442 are sized for 15"deep cabinets.


Laminate End Panels

30" - 96"

111/4", 141/4", or 23"

EPA1130 (1/ctn.)EPA1142 (1/ctn.)EPA1442 (1/ctn.)

EPA2335 (1/ctn.)EPA2384 (1/ctn.)EPA2396 (1/ctn.)


EPA1130 Wall End Panel for 12" Depth 1∕ 4" x 111∕ 4" x 30" None Exterior Raw Laminate



EPA2335 Base End Panel 1∕ 4" x 23" x 35" None Exterior Raw Laminate

EPA2384 Utility End Panel 1∕ 4" x 23" x 84" None Exterior Raw Laminate

EPA2396 Utility End Panel 1∕ 4" x 23" x 96" None Exterior Raw Laminate

▶1∕ 4" thick panels with one-sidedAristex™ laminate on exterior(no edge finish).

▶ End Panels are shipped one percarton. Not sold in pairs.

▶ EPA1442 are sized for 15"deep cabinets.

MO

ULD

ING

SA

ND

TRIM


Vanity Tapered End Panel, 30" High, 21" Deep

21"

30"

7"

71/2"

131/2"

VTEP

▶3∕ 4" thick.

▶ Veneer panel with front edgebanded and both sidesfinished.

Toekick

4"96"

TOEKICK (4 - 8' pc)TOEKICKPLY (4 - 8' pc)TOEKICK8 (1 - 4' pc)TOEKICKPLY8 (1 - 4' pc)


TOEKICK Aristex™ Toekick 1∕ 4" x 4" x 96" None Exterior Raw Laminate

TOEKICKPLY Plywood Toekick 1∕ 4" x 4" x 96" None Exterior Raw Veneer

TOEKICK8 Aristex™ Toekick 1∕ 4" x 4" x 96" None Exterior Raw Laminate

TOEKICKPLY8 Plywood Toekick 1∕ 4" x 4" x 96" None Exterior Raw Veneer


Toekick Cap

3/4"3/4"

315/16"

TKC

▶ TKC dimension:3∕ 4" x 4" x 3∕ 4"

▶ Sold in pairs.

MO

ULD

ING

SA

ND

TRIM

/A

CC

ESS

OR

IES

AN

DPA

RTS


Utility Shelf KitsUKS15 131∕ 2" x 221∕ 2" ✓ ✓

UKS18 161∕ 2" x 221∕ 2" ✓ ✓

UKS24 221∕ 2" x 221∕ 2" ✓ ✓

UKS30 281∕ 2" x 221∕ 2" ✓ ✓

UKS1812 161∕ 2" x 1011∕ 32" ✓ ✓

UKS15PL 131∕ 2" x 221∕ 2" ✓ ✓ ✓

UKS18PL 161∕ 2" x 221∕ 2" ✓ ✓ ✓

UKS24PL 221∕ 2" x 221∕ 2" ✓ ✓ ✓

UKS30PL 281∕ 2" x 221∕ 2" ✓ ✓ ✓

UKS1812PL 161∕ 2" x 1011∕ 32" ✓ ✓ ✓

Utility Shelf Kit Shelves Utility Shelf Kit Clips

▶ Utility Shelf Kits contain twoshelves and eight clips.

▶ Shelves are 3∕ 4" thick.

▶ Maximum weight per squarefoot is 15 lbs.

▶ Utility Shelf Kits are naturalmaple laminate.

▶ Order under style #011.

M

AC

CE

SSO

RIE

SA

ND

PAR

TS

PRODUCT CODES

Dim

ensio

ns

Nat

ural

Map

leLa

min

ate

Whi

teLa

min

ate

Ply

wo

od

Fits

12"

Dee

p

Fits

24"

Dee

p


Pantry Roll Tray Kit

Pantry Roll Tray Kit

UPK18UPK24

Model Dimensions Natural Maple Laminate Thickness

UPK18 1311∕ 16" x 203∕ 16" ✓ 31∕ 8"

UPK24 1911∕ 16" x 203∕ 16" ✓ 31∕ 8"

▶ Pantry Roll Tray Kits feature 1∕ 2"thick solid wood front andfurniture board sides and back.

▶ Pantry Roll Tray Kits containfour trays, eight suspensiontracks, and eight bumper padswith installation screws.


▶ Pantry Roll Tray Kits cannot beused in any Utility cabinet 12"deep.


M

Roll Tray Kits

TKIT15TKIT18TKIT21TKIT24

Model

RecommendedWidth of Face

Frame Opening TraysTrack

SlidersMounting

Blocks

21∕ 2"WoodScrews

5∕ 8"WoodScrews

1∕ 8"Spacers

TKIT15 12" 1 2 2 2 4 2

TKIT18 15" 1 2 2 2 4 2

TKIT21 18" 1 2 2 2 4 2

TKIT24 21" 1 2 2 2 4 2

▶ Roll Tray Kits feature 1∕ 2" thicksolid wood front and furnitureboard sides and back.


▶ All guides are white.


▶ Bumper pads for fieldinstallation included.

▶ An additional Roll-Out Tray canbe installed above the Basecabinet half-depth shelf.

AC

CE

SSO

RIE

SA

ND

PAR

TS


Double Wastebasket Roll-Out Kit

12"

195/16"

22"

DWBR

▶ White epoxy coated wire withFull Extension guides.

▶ Includes two 27 quartWastebaskets with wire storagecompartment.

▶ Mounted on white melamineboard and installs to floor ofcabinet.


▶ Installation of this accessoryrequires removing half-depthshelf. See matrix below forinstallation recommendations.

M

Cabinet

DoubleWastebasket

Roll Out

B15 H*B18 HB21 HB24 HB30 H*B33 HB36 HB39 HB42 HB45 HB48 HBC42 HBC48 HBC51 HSB24 P

Cabinet

DoubleWastebasket

Roll Out

SB30 PSB33 PSB36 PSB39 PSB42 PSB48 PSF30 PSF36 P

SFC36 PSFC42 P

U15 IU18 IU24 IU30 I

Cabinet

DoubleWastebasket

Roll Out

U1590 IU1890 IU2490 IU3090 IU1596 IU1896 IU2496 IU3096 I

H Must remove half-depth shelf.

I Can be installed withoutmodification to cabinet.

P Location of plumbing shouldbe checked prior to installationof storage accessory.

* Recommended.

Sink Tip-Out Trays New

STOT30WHSTOT36WH

Model Cabinet Width DescriptionSTOT30WH 30" two 111∕2" white trays, 2 hingesSTOT36WH 36" two 141∕2" white trays, 2 hinges

▶ Pulls to add to the false frontmust be ordered separately.

▶ If STOTs are used on a fulloverlay style, it isrecommended that a pull beused.

▶ STOT30WH & STOT36WH arefor cabinets with one falsefront.

▶ Two white trays, 21∕ 4" deep.


M

AC

CE

SSO

RIE

SA

ND

PAR

TS


Frame Spacers

HNGSPCRFHNGSPCRF50

▶ For use to provide additionaldoor adjustment in field.

▶ Designed to be placedbetween the face frame andhinge mounting plate.

▶ HNGSPCRF sold in pairs.

▶ HNGSPCRF50 sold in packsof 50.

▶ Use to decrease gap betweendoor - insert behind screw onface frame.

Hinge Spacers

HNGSPCRDHNGSPCRD50

▶ For use to provide additionaldoor adjustment in field.

▶ Designed to be placed aroundthe hinge cup and against theback of the door.

▶ HNGSPCRD sold in pairs.

▶ HNGSPCRD50 sold in packsof 50.

▶ Use to reduce appearance of aslight warp in a door - insertbehind cup of hinge on door,opposite of warp.

Hinge Angle Restrictor Clips

HNGRESCLP

▶ For use in applications withcabinets installed at varyingdepths to prevent the doordamage caused by openinginto an adjacent cabinets.

▶ Restricts hinges to 86 degreeopening capability.

▶ Not recommended for cabinetswith roll trays specified inpartial overlay styles.

▶ Sold in pairs.

Touch-Up

TUKIT

▶ Touch-Up Kit contains one feltmarker and one putty stick.

▶ For white and antique styles,Touch-Up is only recommendedfor face frames and End Panels.

AC

CE

SSO

RIE

SA

ND

PAR

TS|

MO

ULD

ING

SA

ND

TRIM


Contractor’s Choice cabinetry is constructed to strict specifications, including the moisture content present in wood. Whenthe moisture content is maintained at a constant level, Contractor’s Choice is able to minimize the amount of expansion andcontraction associated with natural wood. When a great amount of expansion and contraction occur, the result can be awarped door. By strictly controlling the amount of humidity present during manufacturing, Contractor’s Choice is helping toensure you receive a quality product.

Because wood is a natural product, each piece of wood exhibits its own unique color and grain variations. These differencesgive wood its genuine beauty. The wood's natural properties also determine how each individual piece will react to changingweather conditions. Therefore, eliminating warped doors is virtually impossible.

If you feel that you have a warped door, Contractor’s Choice requires that you perform initial testing to determine the extentof the problem.

1. Remove the door from the cabinet and remove all decorative surface knobs or pulls and hinges.

2. Place the door on a completely flat surface, as determined by using a level, and alternately press on the opposite cornersto observe if the door ‘‘rocks’’ or pulls away from the flat surface.

3. If you observe a gap between the door and flat surface, measure the distance to determine the amount of warpage.• A door must be warped at least 1∕4" before it can be considered for replacement. When ordering a replacement by using

Contractor’s Choice Part Replacement Order Form, be sure to fill in the reason for proper replacement code as ‘‘06’’.• If the door is warped less than 1∕4", we recommend you allow a complete heating and cooling cycle (summer to winter) to

allow the door to reach moisture equilibrium. Adding magnetic catches or roller catches will often correct minorproblems.

4. If the door does not pull away from the flat surface, it is not warped. Most likely, there is a problem with the cabinetinstallation. When cabinets are not properly installed in a level or plumb position, they will become racked and will cause thedoor to appear warped. To check for a racked cabinet, place a level on one end rail. The bubble in the level will appearcentered if the cabinet was properly installed in a level position. Now, place the level on the other end rail. Again, if thebubble appears centered the cabinet is properly installed in a level position. Any variations in the location of the bubble willindicate the cabinet was not properly installed. (A plumb bob will reveal the same information.)

Another proper installation check is to place the level in the top, and then bottom of the installed cabinet’s face frame.Identify the bubble's position in both, top and bottom, locations of the face frame. The bubble's position will indicate if thecabinet was not properly installed.

Cabinet Care Suggestions

Cleaning Tip: Never use a dishcloth to clean or dry cabinet exteriors or interiors. Remnants of detergent or grease may becontained within the dishcloth.

Interiors: Contractor’s Choice cabinet interiors are surfaced with Aristex™, a quality laminate material that resists scuffs,marks, and most common household spills.

1. To clean the interior surface, simply wipe with a damp cloth or sponge, then dry.

2. To remove food residue or grease, use the suds from any common dishwashing liquid and a damp cloth to wipe clean.Dry thoroughly.

CAUTION: If a spill occurs, it is important to clean up the spill and dry the surface immediately. A spill left unattended willsoak through the Aristex™ and cause damage.

Exteriors — Wood Finish: Contractor’s Choice wood exteriors are manufactured with a quality finish that protects the woodand brings out its full beauty. To maintain your cabinets' appearance, Contractor’s Choice recommends cleaning them atleast once a month.

1. Simply wipe the surface of your cabinets with a clean damp cloth, then dry.

2. To remove general soil or grease, use the suds from any common dishwashing liquid and a damp cloth to wipe clean. Drythoroughly.

3. Excess moisture can damage any cabinet finish; areas near the sink, range, dishwasher, oven and baseboards are the mostsusceptible. Keep these surfaces dry.

4. Because Contractor’s Choice uses a quality varnish on the finish, waxing your cabinets is not necessary. If waxing ispreferred, use any furniture polish or lemon oil recommended for fine furniture. Be sure to completely wipe off the excesswax to avoid build-up.

CAUTION: Avoid using cleaners that contain bleach, ammonia or state on the label they have any type of abrasives. Thesecleaners can cause damage to your cabinet finish.

Exteriors — Laminate/Thermofoil: Some Contractor’s Choice styles use doors and drawer fronts with a laminate orthermofoil finish. To clean this type of finish, Contractor’s Choice recommends the same procedure described for woodexteriors.

WA

RP

ED

DO

OR

PO

LIC

Y/

CA

BIN

ET

CA

RE

Warped Door Policy


• A minimum of 60 days notice will be given to customers announcing the discontinuation of a product.• Product will no longer be available to order after the discontinuation date. Only warranty orders will be considered.

With warranty orders, Contractor’s Choice will have the option to repair or replace a customer's defective product with thesame discontinued product they originally purchased or with a current product that is similar in appearance.

Freight Policy

• If an entire order is no charge, Contractor’s Choice will pay for standard ground freight.• If an order contains a chargeable item, the cost of freight will be charged to the customer's invoice.• If a customer requests an upgrade to a parcel shipment method, the customer will be charged the entire freight charge.

Returned Goods Policy

• All cabinets are manufactured according to the individual order and cannot be changed, cancelled, or returned once orderhas been scheduled.

Transportation Claims

• Please inspect merchandise at time of signing freight bill, and have the transportation company note any damage incurredin transit.

Disclosure

• Prices and specifications are subject to change without notice.

PO

LIC

IES

/IN

FOR

MA

TIO

NDiscontinued Product Policy


One Year Limited Warranty on Cabinets. Contractor’s Choice warrants to original consumer purchasers for a period of oneyear from the original date of purchase that all other components of Contractor’s Choice cabinetry shall be free from defectsin material and workmanship under normal use.

Lifetime Limited Warranty on Drawer Guides and Hinges. Contractor’s Choice warrants to original consumer purchasersfor as long as they own their homes that the drawer box, drawer guides and hinges used in the manufacture of Contractor’sChoice cabinetry products shall be free from defects in material and workmanship under normal use.

These warranties are only applicable to products used in residential applications within the United States and is nottransferable to subsequent owners.

Should defects in material or workmanship exist during the applicable warranty period in any Contractor’s Choice product,Contractor’s Choice will elect at its discretion to either repair or replace the defective material or component free of charge.This warranty covers only parts and materials of the products supplied by Contractor’s Choice. Not covered under thiswarranty are counter tops, appliances, plumbing fixtures, etc. or the costs, including labor, to remove and reinstall materialsand related components such as fittings, appliances, etc.

This warranty shall become void if the cabinets are in any way modified, improperly installed or damaged prior to or duringthe installation. This also disclaims products utilized in any application other than the standard. Furthermore, this warrantywill not apply to cabinets damaged by misuse, neglect, abuse, acts of God, exposure to moisture, exposure to extremetemperatures or the effects of normal wear and tear.

Natural woods may vary in color, characteristics and exhibit subtle changes as they age. Sunlight, smoke, household cleanersand other environmental conditions may also affect the color match over time. These variations are considered to be thenature of the material in relation to their environmental exposure and are not covered under this warranty.

Contractor’s Choice reserves the right to alter design, specifications and material without obligation to make similar changesto products previously manufactured.

The repair(s) or replacement(s) are contingent upon the current product offerings of styles and construction options withinthe Contractor’s Choice product at the time of the warranty claim. If a warranty claim is filed after an Contractor’s Choiceproduct becomes obsoleted, Contractor’s Choice reserves the right to honor the warranty in one of the following fashions:

1) To replace the affected component with a new component of the same style.

2) To replace the affected component and any other component(s) in the residential application to achieve a uniformappearance with a similar and comparable product style of the originally purchased style.

If components are replaced, Contractor’s Choice cannot guarantee that the finish of these replacements will exactly matchthe finish and appearance of the components in the residential application. This is due to the changes that occur during thewoods' natural aging process, affecting its color and grain.

THIS WARRANTY IS THE EXCLUSIVE WARRANTY OF CONTRACTOR’S CHOICE AND IS IN LIEU OF ANDCONTRACTOR’S CHOICE DISCLAIMS ALL OTHER WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING THEIMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.

This warranty gives you specific legal rights and you may have other rights, which vary from state to state. Some states donot allow the exclusion or limitation of incidental or consequential damages, so the above limitations or exclusions may notapply to you.

To obtain replacement(s) under Contractor’s Choice's One Year and Lifetime Limited warranties, first contact your authorizedContractor’s Choice Cabinetry dealer or distributor, who will arrange for inspection of the cabinet. A dated sales receipt asproof of purchase is required to obtain benefits from this warranty.

If you have difficulty obtaining assistance, please write to:

Contractor’s Choice CabinetryOne MasterBrand Cabinets Drive

P.O. Box 420Jasper, IN 47547-0420

Phone: (812) 482-2527 or Fax: (812) 634-2838

Contractor’s Choice Cabinetry is a subsidiary of MasterBrand Cabinets, Inc.

WA

RR

AN

TY

Contractor’s Choice 1 Year and Limited Lifetime Warranty


Contractor’s Choice is your dedicated partner in providing and deliverying timeless cabinetry solutions with lasting quality.

© 2017 MasterBrand Cabinets, Inc.Product photography and illustrations have been reproduced as accurately as printing technologies permit. To ensure highest satisfaction, we strongly suggest you view an actual sample for best color wood grain and finish representation.

Styles, product availability and construction may vary slightly from those shown in this book due to material availability and/or design evolution. Specifications are subject to change without notice. Check One Touch for the latest updates. Our customer service is available if your design requires verification of product availability and specifications.

Freight Policy• If an entire order is no charge, Contractor’s Choice will pay for standard ground freight.

• If an order contains a chargeable item, the cost of freight will be charged to the customer’s invoice.

• If a customer requests an upgrade to a parcel shipment method, the customer will be charged the entire freight charge.

Returned Goods Policy• Products of standard manufacture may not be returned for credit. Upon the loading and

completion of the shipment, all materials are the responsibility of the customer.

• Installed or freight damaged cabinets may not be returned.

Transportation Claims• The responsibility of Contractor’s Choice ceases upon delivery of product in good order

to transport companies and all product is shipped at consignee’s risk.

• Please inspect merchandise at time of signing freight bill and have transportation company note any damage incurred in transit.

Date post:	14-Mar-2019
Category:	Documents
Upload:	lydat
View:	221 times
Download:	0 times

SPECIFICATIONS - cabinetexpress.com · mineral deposits/streaks, knots, sap runs, pin holes, and...

Documents