4
REMOTE MONITORING SYSTEM 24 hours a day, 365 days a year, wherever you are .... we are there with you.
Specifications
Monitoring Unit Type V2 S
REMOTE MONITORING SYSTEM
YazakI ENERGY SYSTEMS, INc.701 E. Plano Parkway, Suite 305Plano, Texas 75074-6700Phone: (469) 229-5443 Fax: (469) 229-5448http://www.yazakienergy.com
For further information on the complete line of Yazaki Chiller-Heaters, please contact us at:
24 hours a day,
365 days a year,
wherever you are ....
we are there with you.
Yazaki reserves the right to discontinue, or change at any time, specifications or designs without notice and without incurring obligations.
Noise Filter
D, G, or L SERIES CHILLER/HEATER (Max. 9 units)
SDOHHSAATM
MODEM
RS232C Cable
Inside buildingRD CDTR
Telephone line (Supplied by Others)
RELAY
V2 V2 V2
CB CB CB
MODULE
MASTER/DRONE CABLE DRONE/DRONE CABLE
temperature sensors(field installed)
Noise Filter
SDOHHSAATM
MODEM
Inside buildingRD CDTR
Telephone line (Supplied by Others)
V-SERIES (or newer) CHILLER/HEATER (Max. 10 units)
TYPE 'S' MONITORING UNIT
AROTRENDPOWER M
RALA
RMU104X
RRS-232C
XT
DC
XRT
X
W/CB
Communication Cable (Supplied by Others)RS232C Cable
CALL
ON OFF
POWER
YAZAKI
CB CB CB
18 ga stranded twisted pair(1500' max.)
84WL
Monitoring Systemfor Gas Fired Absorption Chiller-Heater
Typical Type ‘S’ Monitoring Unit Installation Typical V2 Monitoring Unit Installation
Model Number RMU-104 RMU-064COM Power Supply 100V, 60Hz, 1ph. 120V, 60Hz, 1ph. Power Consumption (VA) 8 6 Environmental Limits 14˚F to 120˚F Without Condensation Maximum Monitored Units 1 Chiller-Heater 10 Chillers-Heaters Maximum Number of Drone (RMU-104) Units 8 8 Temperature Measuring Points 10 Temp: 6pt. Temp Diff: 1pt. (built-in) Timers/Counters 4/4 10/3 Internal I/O Points 0 280 Switches Powers Switch, CallSwitch, Dip Switch LED Indication Lights 3 8
Back Up Power Capacitor (Approx. 10 days) Case Material and Color Steal/Ivory-gray ABS Resin/Ivory Dimensions (inches) 4.61X5.16X2.17 7.87X7.48X2.125 Weight (lb) 3.3 4.78
DataTransmissionSpeed (bps)
With Modern (RS232C) 1200/2400/9600With Control Box Not applicable 2400Between V2 MonitoringUnits (RMU-104)
1200/2400/9600
External Connections
With Modern (RS232C) 25-PIN (Female)With Control Box Relay Module Terminol BlockWith V2 Monitoring Unit 9-PIN (Female)
How It Works
The Arotrend™ Remote Monitoring System utilizes a modem and phone line to connect to the Yazaki Monitoring Center. Under normal operating conditions, data is collected at regular intervals by the Arotrend™monitoring unit and sent to Yazaki. While a monitoring unit temporarily stores hours of data, all data sent to the Yazaki Monitoring Center is permanently stored and available for review. When an alarm or abnormal condition occurs, data is immediately sent to the Yazaki Monitoring Center, and a report is automatically faxed to an owner’s designated contact person for appropriate action. A service technician with a laptop computer can use the Arotrend™ software to view real-time operating conditions whether connected directly to the monitoring unit at the jobsite, or remotely through a phone line. With this data available, the abnormal condition can be diagnosed quicker than ever before, without even being at the jobsite. The Arotrend™ Remote Monitoring System is available from Yazaki through a Monitoring Service Agreement.
Features and Benefits of the Arotrend™ Monitoring System:24-Hour Monitoring: Gives you the security of knowing that expert Yazaki personnel are continuously on watch for any sign of potential trouble.
Temperature Analysis: Critical temperature and operational data used in troubleshooting a Yazaki Chiller-Heater is recorded and then shown graphically. By speeding up the troubleshooting process, money can be saved by reducing the length of a service call. In some cases, a service call can be avoided altogether.
Cycle Diagram: Gives a graphical look at the temperature data and valve positions to further aid in the troubleshooting process. Once again, the immediate availability of detailed temperature and operational information can shorten the length of a service call and save money.
Yazaki Factory Support: With experienced Yazaki personnel overseeing the monitoring system, conditions that may need attention can be addressed before a change in comfort level is noticed, avoiding any loss in comfort, and saving money in expensive repairs later on.
Event Notice: When an alarm or abnormal condition is received at the Yazaki Monitoring Center, an Event Notice is automatically faxed to an owner’s designated contact person. This report identifies the abnormal Chiller-Heater condition, so that valuable time is saved in determining a course of action.
Temperature Analysis
Cycle Diagram (Type ‘S’ Monitoring Unit)
Type ‘S’ Monitoring Unit
Event NoticeV2 Monitoring Unit with Sensors
Yazaki Monitoring Center
Introducing the YAZAKI Arotrend™ Remote Monitoring System… designed to save you money.With the Arotrend™ Remote Monitoring System continuously monitoring the operating conditions of Yazaki Chiller-Heaters 24 hours a day, 365 days a year, we offer a higher level of service than ever before. Now potential problems can be found and fixed before any change in comfort occurs. In addition, troubleshooting with the Arotrend™ Remote Monitoring System both minimizes onsite service calls and shortens those that occur, saving time and money!
The YAZAKI Arotend™ Remote Monitoring System is like having an onsite facilities engineer.
Behind the system are people you can trust.It’s More Than Just SoftwareThe Arotrend™ Remote Monitoring System is more than just a computer network and software. It also includes experienced personnel available to assist a Service Technician when troubleshooting a Yazaki Chiller-Heater. Our motto is to "Be a Good Neighbor!"
The Arotrend™ System is easy to install and is monitored around-the-clock.
The equipment is designed for accuracy and dependability.
With detailed reports and constant monitoring, there is peace of mind in knowing the Chiller-Heater is operating properly.
Relationships Make the Difference
Yazaki Technical Support
How It Works
The Arotrend™ Remote Monitoring System utilizes a modem and phone line to connect to the Yazaki Monitoring Center. Under normal operating conditions, data is collected at regular intervals by the Arotrend™monitoring unit and sent to Yazaki. While a monitoring unit temporarily stores hours of data, all data sent to the Yazaki Monitoring Center is permanently stored and available for review. When an alarm or abnormal condition occurs, data is immediately sent to the Yazaki Monitoring Center, and a report is automatically faxed to an owner’s designated contact person for appropriate action. A service technician with a laptop computer can use the Arotrend™ software to view real-time operating conditions whether connected directly to the monitoring unit at the jobsite, or remotely through a phone line. With this data available, the abnormal condition can be diagnosed quicker than ever before, without even being at the jobsite. The Arotrend™ Remote Monitoring System is available from Yazaki through a Monitoring Service Agreement.
Features and Benefits of the Arotrend™ Monitoring System:24-Hour Monitoring: Gives you the security of knowing that expert Yazaki personnel are continuously on watch for any sign of potential trouble.
Temperature Analysis: Critical temperature and operational data used in troubleshooting a Yazaki Chiller-Heater is recorded and then shown graphically. By speeding up the troubleshooting process, money can be saved by reducing the length of a service call. In some cases, a service call can be avoided altogether.
Cycle Diagram: Gives a graphical look at the temperature data and valve positions to further aid in the troubleshooting process. Once again, the immediate availability of detailed temperature and operational information can shorten the length of a service call and save money.
Yazaki Factory Support: With experienced Yazaki personnel overseeing the monitoring system, conditions that may need attention can be addressed before a change in comfort level is noticed, avoiding any loss in comfort, and saving money in expensive repairs later on.
Event Notice: When an alarm or abnormal condition is received at the Yazaki Monitoring Center, an Event Notice is automatically faxed to an owner’s designated contact person. This report identifies the abnormal Chiller-Heater condition, so that valuable time is saved in determining a course of action.
Temperature Analysis
Cycle Diagram (Type ‘S’ Monitoring Unit)
Type ‘S’ Monitoring Unit
Event NoticeV2 Monitoring Unit with Sensors
Yazaki Monitoring Center
Introducing the YAZAKI Arotrend™ Remote Monitoring System… designed to save you money.With the Arotrend™ Remote Monitoring System continuously monitoring the operating conditions of Yazaki Chiller-Heaters 24 hours a day, 365 days a year, we offer a higher level of service than ever before. Now potential problems can be found and fixed before any change in comfort occurs. In addition, troubleshooting with the Arotrend™ Remote Monitoring System both minimizes onsite service calls and shortens those that occur, saving time and money!
The YAZAKI Arotend™ Remote Monitoring System is like having an onsite facilities engineer.
Behind the system are people you can trust.It’s More Than Just SoftwareThe Arotrend™ Remote Monitoring System is more than just a computer network and software. It also includes experienced personnel available to assist a Service Technician when troubleshooting a Yazaki Chiller-Heater. Our motto is to "Be a Good Neighbor!"
The Arotrend™ System is easy to install and is monitored around-the-clock.
The equipment is designed for accuracy and dependability.
With detailed reports and constant monitoring, there is peace of mind in knowing the Chiller-Heater is operating properly.
Relationships Make the Difference
Yazaki Technical Support
Specifications
Monitoring Unit Type V2 S
REMOTE MONITORING SYSTEM
YazakI ENERGY SYSTEMS, INc.701 E. Plano Parkway, Suite 305Plano, Texas 75074-6700Phone: (469) 229-5443 Fax: (469) 229-5448http://www.yazakienergy.com
For further information on the complete line of Yazaki Chiller-Heaters, please contact us at:
24 hours a day,
365 days a year,
wherever you are ....
we are there with you.
Yazaki reserves the right to discontinue, or change at any time, specifications or designs without notice and without incurring obligations.
Noise Filter
D, G, or L SERIES CHILLER/HEATER (Max. 9 units)
SDOHHSAATM
MODEM
RS232C Cable
Inside buildingRD CDTR
Telephone line (Supplied by Others)
RELAY
V2 V2 V2
CB CB CB
MODULE
MASTER/DRONE CABLE DRONE/DRONE CABLE
temperature sensors(field installed)
Noise Filter
SDOHHSAATM
MODEM
Inside buildingRD CDTR
Telephone line (Supplied by Others)
V-SERIES (or newer) CHILLER/HEATER (Max. 10 units)
TYPE 'S' MONITORING UNIT
AROTRENDPOWER M
RALA
RMU104X
RRS-232C
XT
DC
XRT
X
W/CB
Communication Cable (Supplied by Others)RS232C Cable
CALL
ON OFF
POWER
YAZAKI
CB CB CB
18 ga stranded twisted pair(1500' max.)
84WL
Monitoring Systemfor Gas Fired Absorption Chiller-Heater
Typical Type ‘S’ Monitoring Unit Installation Typical V2 Monitoring Unit Installation
Model Number RMU-104 RMU-064COM Power Supply 100V, 60Hz, 1ph. 120V, 60Hz, 1ph. Power Consumption (VA) 8 6 Environmental Limits 14˚F to 120˚F Without Condensation Maximum Monitored Units 1 Chiller-Heater 10 Chiller-Heaters Maximum Number of Drone (RMU-104) Units 8 8 Temperature Measuring Points 10 Temp: 6pt. Temp Diff: 1pt. (built-in) Timers/Counters 4/4 10/3 Internal I/O Points 0 280 Switches Power Switch, Call Switch, DIP Switch LED Indication Lights 3 8
Back Up Power Capacitor (Approx. 10 days) Case Material and Color Steal/Ivory-gray ABS Resin/Ivory Dimensions (inches) 4.61X5.16X2.17 7.87X7.48X2.125 Weight (lb) 3.3 4.78
DataTransmissionSpeed (bps)
With Modern (RS232C) 1200/2400/9600With Control Box Not applicable 2400Between V2 MonitoringUnits (RMU-104)
1200/2400/9600
External Connections
With Modern (RS232C) 25-PIN (Female)With Control Box Relay Module Terminal BlockWith V2 Monitoring Unit 9-PIN (Female)
