Spectrometer SM Series Spectrometers · 2017-02-08 · NIR - 550nm to 1050nm other ranges are...

SPECTRAL PRODUCTS

33Copyright © 2003 Spectral LLC www.spectralproducts.com Toll Free 1-877-208-0245 [email protected]

Sp

ectrumA

nalyzersD

etectionSystem

sS

amp

ling

Accessories

Ap

pend

ixP

roduct IndexSpectrom

eterB

asics

Monochrom

atorsand Spectrographs

Fibers &

Coup

lersA

pp

lication

& Selection

Sp

ecto

rmete

rsA

uto

matic

Filter Wheels

Light

Sources

Section lll:Section lll:Section lll:Section lll:Section lll:SM Series SpectrSM Series SpectrSM Series SpectrSM Series SpectrSM Series Spectrometerometerometerometerometersssss

SPECSPECSPECSPECSPECTROMETERSTROMETERSTROMETERSTROMETERSTROMETERSSM200SM200SM200SM200SM200

OEM Packaged Fiber Optic CCDSM240SM240SM240SM240SM240

Hand-Held CCDSM24SM24SM24SM24SM2411111

Near Infrared Enhanced CCDAD300AD300AD300AD300AD300

Back Thinned CCD Tunable, TE CooledSM300SM300SM300SM300SM300

Fluorencenced/RamanSM30SM30SM30SM30SM3011111

PbS ArraySM302SM302SM302SM302SM302

InGaAs ArraySM520SM520SM520SM520SM520

High Resolution CCD

SM SERIES ACCESSORIESSM SERIES ACCESSORIESSM SERIES ACCESSORIESSM SERIES ACCESSORIESSM SERIES ACCESSORIES

SM SERIES SOFTWSM SERIES SOFTWSM SERIES SOFTWSM SERIES SOFTWSM SERIES SOFTWAREAREAREAREARE

www.spectralproducts.com

SPECTRAL PRODUCTS


Sp

ectrumA

nalyzersD

etectionSystem

sS

amp

ling

Accessories

Ap

pend

ixP


eterB

asics

Monochrom


Fibers &

Coup

lersA

pp

lication

& Selection

Sp

ecto

rmete

rsA

uto

matic

Filter Wheels

Light

Sources

SM200SM200SM200SM200SM200OEM packOEM packOEM packOEM packOEM packaged Fiber Optic CCD Spectraged Fiber Optic CCD Spectraged Fiber Optic CCD Spectraged Fiber Optic CCD Spectraged Fiber Optic CCD Spectrometerometerometerometerometer

• Best performance cost ratio

in the industry.

• Designed from the ground up

for OEM integration.

• Small impact resistant optical

bench.

• Flexible light input direct to slit or

via fiber.

• Fully customizable.

• ILX 511 allows up to a 700 nm

measurement window between

200nm and 1050nm (800 nm

measurement window size possible

for some applications).

• USB 2.0 interface with 16-bit

dynamic range available!

The Choice fThe Choice fThe Choice fThe Choice fThe Choice for OEM Spectror OEM Spectror OEM Spectror OEM Spectror OEM SpectralalalalalApplicationsApplicationsApplicationsApplicationsApplications

revised 6/03

The SM200 is a miniature spectrometer designed for custom OEM

applications. It offers a high performance to cost ratio for new systems designs.

The SM200 can accept light directly through its built-in slit or via optical fiber. A

removable fiber coupler faceplate allows use of standard SMA 905, FC and

custom fiber connectors. This faceplate also allows direct attachment to dedicated

systems and a number of SMX Accessories. A durable aluminum housing encloses

the SM200 optical bench; through careful design this housing provides stable

device operation over a wide range of temperatures.

The spectrometer sensor array and array driver electronics are mounted

inside the SM200 housing, from there a flex cable connects to exterior support

electronics. The standard sensor array used is the Sony ILX 511. The driver

electronics have been designed for highly sensitive yet stable operation. The

design of the SM200 also allows the use of custom arrays for special applications,

including photodiode assemblies and alternative CCD arrays.

Standard interfaces to the SM200 include a USB 2.0 interface with 16-bit

extended dynamic range and a PCI card interface with 12-bit dynamic range

sampling. Custom interfaces and legacy ISA and PCMCIA interfaces are available.

Software support includes custom DLLs for dedicated applications

development and our SM32Pro windows based spectral acquisition and analysis

software. Both standard and legacy interface designs provide support for advanced

acquisition programming and external triggering.


SPECTRAL PRODUCTS


Sp

ectrumA

nalyzersD

etectionSystem

sS

amp

ling

Accessories

Ap

pend

ixP


eterB

asics

Monochrom


Fibers &

Coup

lersA

pp

lication

& Selection

Sp

ecto

rmete

rsA

uto

matic

Filter Wheels

Light

Sources

Specifications:Specifications:Specifications:Specifications:Specifications:Detectors:Detectors:Detectors:Detectors:Detectors:

Sony CCD Linear ASony CCD Linear ASony CCD Linear ASony CCD Linear ASony CCD Linear ArrayrrayrrayrrayrrayNumber of Pixels: 2048Sensing Pixel Size: 14µm x 200µmSensitivity: 1800 V/(lx•s) @ 660nmCustomer array installation availableCustomer array installation availableCustomer array installation availableCustomer array installation availableCustomer array installation available

Computer Interface:Computer Interface:Computer Interface:Computer Interface:Computer Interface:USB 2.0USB 2.0USB 2.0USB 2.0USB 2.0 16 bit 500KHzPCI busPCI busPCI busPCI busPCI bus NI-PCI 12 bit 100 KHz

PCI interface boardCall SP for other interface options,Call SP for other interface options,Call SP for other interface options,Call SP for other interface options,Call SP for other interface options,including PCMCIA and ISAincluding PCMCIA and ISAincluding PCMCIA and ISAincluding PCMCIA and ISAincluding PCMCIA and ISA

Temperature Induced Shift:Temperature Induced Shift:Temperature Induced Shift:Temperature Induced Shift:Temperature Induced Shift: 0.01 nm /°CSpectrograph f#:Spectrograph f#:Spectrograph f#:Spectrograph f#:Spectrograph f#: 2.7Available Gratings:Available Gratings:Available Gratings:Available Gratings:Available Gratings: See Appendix ASlit Options:Slit Options:Slit Options:Slit Options:Slit Options: 10, 25, 50 or 100µmFiber Options:Fiber Options:Fiber Options:Fiber Options:Fiber Options: 50 to 600µm core diameterFiber Coupler:Fiber Coupler:Fiber Coupler:Fiber Coupler:Fiber Coupler: SMA 905 or FC standard,

custom coupler availableFiber Numerical Aperture:Fiber Numerical Aperture:Fiber Numerical Aperture:Fiber Numerical Aperture:Fiber Numerical Aperture: 0.2Effective Spectral Range:Effective Spectral Range:Effective Spectral Range:Effective Spectral Range:Effective Spectral Range: 200 to 1050nmOrder Sorting Filter:Order Sorting Filter:Order Sorting Filter:Order Sorting Filter:Order Sorting Filter: Longpass filter installed

per wavelength coverageSpectral Resolution:Spectral Resolution:Spectral Resolution:Spectral Resolution:Spectral Resolution: 0.3 to 10nm depending on

the slit and grating choicesStray Light:Stray Light:Stray Light:Stray Light:Stray Light: <0.01% at 600nmSoftware:Software:Software:Software:Software: SM32Pro (free with spectrometer)

Includes SDK and DLLs for easycustom application development.

0.905

2.000 2.689

0.329

Ø 0.174

1.570

3.813

0.492

2.078

Ordering Information: Please indicate productnumber plus description when ordering.

SM200SM200SM200SM200SM200 OEM Fiber Optic Spectrometer

revised 6/03


SPECTRAL PRODUCTS


Sp

ectrumA

nalyzersD

etectionSystem

sS

amp

ling

Accessories

Ap

pend

ixP


eterB

asics

Monochrom


Fibers &

Coup

lersA

pp

lication

& Selection

Sp

ecto

rmete

rsA

uto

matic

Filter Wheels

Light

Sources

SM240SM240SM240SM240SM240Hand-held CCD SpectrHand-held CCD SpectrHand-held CCD SpectrHand-held CCD SpectrHand-held CCD Spectrometerometerometerometerometer

The SM240 is a compact CCD Spectrometer for use with a PC. Based on the

SM200SM200SM200SM200SM200 optical bench design, it supports many different applications where

spectral or color measurements are required, including high dynamic range

applications.

The SM240 can accept light directly through its built-in slit or via optical

fiber. A removable faceplate allows the use of standard SMA 905, FC and custom

fiber connectors. This faceplate also allows direct attachment to dedicated

systems and a number of SMX AccessoriesSMX AccessoriesSMX AccessoriesSMX AccessoriesSMX Accessories. The durable aluminum housing that

encloses the SM240 provides stable optical bench operation over a wide range

of temperatures.

The standard sensor array used is the Sony ILX 511. The array driver

electronics have been designed for highly sensitive yet stable operation. This

array (in conjunction with our special UV coating process and custom order

sorting filters) allows up to a 700nm measurement window located from 200nm

to 1050nm (smaller measurement window sizes increase spectral resolution and

light sensitivity, some laser applications may support a window size of up to

800nm). The design of the SM240 also allows use of custom arrays for special

applications, including photodiode assemblies and alternative CCD arrays.

Standard interfaces to the SM240 include a USB 2.0 interface with 16-bit

extended dynamic range and a PCI card interface with 12-bit dynamic range.

Custom interfaces and legacy ISA and PCMCIA interfaces are available.

Software support includes a SDK and DLLs for dedicated applications

development and our SM32ProSM32ProSM32ProSM32ProSM32Pro Windows-based spectral acquisition and analysis

software. Both standard and legacy interface designs provide support for advanced

acquisition programming and external triggering.

• Compact system, can be handheld

or securely mounted.

• Flexible optical input direct to slit

or via fiber.

• Designed from the ground up

for applications.

• Impact resistant housing.

• High performance electronics.

• Standard design allows up to a

700nm measurement window

between 200nm and 1050nm (800

nm window possible for some

applications).



The Choice fThe Choice fThe Choice fThe Choice fThe Choice for Spectror Spectror Spectror Spectror Spectral Applicationsal Applicationsal Applicationsal Applicationsal Applications

revised 6/03


SPECTRAL PRODUCTS


Sp

ectrumA

nalyzersD

etectionSystem

sS

amp

ling

Accessories

Ap

pend

ixP


eterB

asics

Monochrom


Fibers &

Coup

lersA

pp

lication

& Selection

Sp

ecto

rmete

rsA

uto

matic

Filter Wheels

Light

Sources


SM240 USBSM240 USBSM240 USBSM240 USBSM240 USB USB interface, SpectrometerSM240 PCISM240 PCISM240 PCISM240 PCISM240 PCI PCI interface, Spectrometer


Sony CCD Linear ArraySony CCD Linear ArraySony CCD Linear ArraySony CCD Linear ArraySony CCD Linear ArrayNumber of Pixels: 2048Sensing Pixel Size: 14µm x 200µmSensitivity: 1800 V/(lx•s) @ 660nmCustomer array installation availableCustomer array installation availableCustomer array installation availableCustomer array installation availableCustomer array installation available

Dimensions (inches):Dimensions (inches):Dimensions (inches):Dimensions (inches):Dimensions (inches): 5.6 h x 2.75 w x 0.87 dWeight:Weight:Weight:Weight:Weight: 0.5 lbs.Spectral Range:Spectral Range:Spectral Range:Spectral Range:Spectral Range: UV - 200nm to 450nm

VIS - 380nm to 760nmNIR - 550nm to 1050nm

other ranges are configurablefrom 200nm to 1050nm

Spectral Resolution:Spectral Resolution:Spectral Resolution:Spectral Resolution:Spectral Resolution: 0.3 - 10nm dependent onspectral range, slit width, and fiber diameter.

Available Gratings:Available Gratings:Available Gratings:Available Gratings:Available Gratings: See Appendix A

SoftwSoftwSoftwSoftwSoftwararararareeeee✓✓✓✓✓ SM32Pro - Windows® 98,2000, XP

based software for data acquisitionand analysis.

✓✓✓✓✓ Transmission, reflectance, and absorbancemeasurements.

✓✓✓✓✓ Data export, zoom in and out, spectrum overlays, and many more features.

✓✓✓✓✓ Color analysis tools included.✓✓✓✓✓ Signal average and integration time control.✓✓✓✓✓ Double beam version available.✓✓✓✓✓ SDK and DLLs available for easy custom

software development.

Software

��

��

��

��

��

��

��

��

revised 6/03

Entrance:Entrance:Entrance:Entrance:Entrance:FiberFiberFiberFiberFiber SMA 905 or FC fiber coupler.

50-600µm core Ø fiberNA = 0.2

SlitSlitSlitSlitSlit 10, 25, 50 or 100µmDynamic Range:Dynamic Range:Dynamic Range:Dynamic Range:Dynamic Range: 12 bit (4096:1) or

16 bit (65536:1)Computer Interface:Computer Interface:Computer Interface:Computer Interface:Computer Interface:

USB 2.0USB 2.0USB 2.0USB 2.0USB 2.0 16 bit 500KHzPCI busPCI busPCI busPCI busPCI bus NI-PCI 12 bit 100 KHz


Temperature Range:Temperature Range:Temperature Range:Temperature Range:Temperature Range: 15°C to 40°CSoftware:Software:Software:Software:Software: SM32Pro

��

��

��

��

��

��

��

��

��

��


SPECTRAL PRODUCTS


Sp

ectrumA

nalyzersD

etectionSystem

sS

amp

ling

Accessories

Ap

pend

ixP


eterB

asics

Monochrom


Fibers &

Coup

lersA

pp

lication

& Selection

Sp

ecto

rmete

rsA

uto

matic

Filter Wheels

Light

Sources

SM24SM24SM24SM24SM2411111NIR Laser SpectrNIR Laser SpectrNIR Laser SpectrNIR Laser SpectrNIR Laser Spectrometerometerometerometerometer

The Choice fThe Choice fThe Choice fThe Choice fThe Choice forororororSpectrSpectrSpectrSpectrSpectral NIR Laser Applicationsal NIR Laser Applicationsal NIR Laser Applicationsal NIR Laser Applicationsal NIR Laser Applications

The SM241 is a compact CCD based Spectrometer designed for NIR laser

applications. Spectral Product’s IR up-conversion phosphor CCD coating breaks

the standard Silicon-based CCD detectors array sensitivity barrier of 1100nm to

allow spectral measurements up to 1700nm. This technology makes the SM241

a lower cost alternative to Germanium or InGaAs systems. The SM241 optical

bench includes oversized gold plated mirrors and gratings to accommodate NIR

light collection and analysis. Maximum spectral coverage with this spectrometer

is 900 nm to 1700 nm (reduced coverage window size within 900-1700nm will

increase spectral resolution and light sensitivity).

Standard interfaces include a USB 2.0 interface with a 16-bit extended

dynamic range and a PCI card interface with a 12-bit dynamic range. Custom

interfaces and legacy ISA and PCMCIA interfaces are also available. Software

support includes a SDK and DLLs for dedicated applications development and our

SM32ProSM32ProSM32ProSM32ProSM32Pro windows based spectral acquisition and analysis software. Both standard

and legacy interface designs provide support for advanced acquisition programming

and external triggering.

• Less expensive alternative to

Germanium or InGaAs systems.

• Compact system, can be handheld

or securely mounted.

• Flexible optical input direct to

slit or via fiber.

• High performance electronics.

• Allows spectral measurements

between 900nm and 1700nm.



revised 6/03


SPECTRAL PRODUCTS


Sp

ectrumA

nalyzersD

etectionSystem

sS

amp

ling

Accessories

Ap

pend

ixP


eterB

asics

Monochrom


Fibers &

Coup

lersA

pp

lication

& Selection

Sp

ecto

rmete

rsA

uto

matic

Filter Wheels

Light

Sources

Specifications:Specifications:Specifications:Specifications:Specifications:# of CCD Pixels:# of CCD Pixels:# of CCD Pixels:# of CCD Pixels:# of CCD Pixels: 2048CCD Pixel Size:CCD Pixel Size:CCD Pixel Size:CCD Pixel Size:CCD Pixel Size: 14µm by 200µmCCD Sensitivity:CCD Sensitivity:CCD Sensitivity:CCD Sensitivity:CCD Sensitivity: 30 V/mJ/cm2

Grating:Grating:Grating:Grating:Grating: 300 to 1800 grooves per mmSpectral Response:Spectral Response:Spectral Response:Spectral Response:Spectral Response: 900nm to 1600nmSpectral Resolution:Spectral Resolution:Spectral Resolution:Spectral Resolution:Spectral Resolution: 5nm with standard slit

configurationAvailable Gratings:Available Gratings:Available Gratings:Available Gratings:Available Gratings: See Appendix AEntrance:Entrance:Entrance:Entrance:Entrance:

SlitSlitSlitSlitSlit 10µm - 100µm FiberFiberFiberFiberFiber SMA fiber coupler, NA = 0.2Stray Light Rejection:Stray Light Rejection:Stray Light Rejection:Stray Light Rejection:Stray Light Rejection: better than 10-3

Analog to Digital:Analog to Digital:Analog to Digital:Analog to Digital:Analog to Digital: USB 16 bit standard,PCI optional.

Digitizer Resolution:Digitizer Resolution:Digitizer Resolution:Digitizer Resolution:Digitizer Resolution: 12-bit, 4096 to 1 or 16 bit, 65536 to 1


SM241 USBSM241 USBSM241 USBSM241 USBSM241 USB Near Infrared Enhanced Hand-held Spectrometer, USB

SM241 USBSM241 USBSM241 USBSM241 USBSM241 USB Near Infrared Enhanced Hand-held Spectrometer, USB

revised 6/03

��

��

��

��

��

��

��

��

Computer Interface:Computer Interface:Computer Interface:Computer Interface:Computer Interface:USB BusUSB BusUSB BusUSB BusUSB Bus 16 bit 500KHzPCI busPCI busPCI busPCI busPCI bus NI-PCI 12 bit 100 KHz

PCI interface boardCall SP for other interface optionsCall SP for other interface optionsCall SP for other interface optionsCall SP for other interface optionsCall SP for other interface options

Dimensions (inches):Dimensions (inches):Dimensions (inches):Dimensions (inches):Dimensions (inches): 5.5 x 2.9 x 0.99Weight:Weight:Weight:Weight:Weight: 0.5 lbs.Software:Software:Software:Software:Software: SM32Pro


SPECTRAL PRODUCTS


Sp

ectrumA

nalyzersD

etectionSystem

sS

amp

ling

Accessories

Ap

pend

ixP


eterB

asics

Monochrom


Fibers &

Coup

lersA

pp

lication

& Selection

Sp

ecto

rmete

rsA

uto

matic

Filter Wheels

Light

Sources

AD300AD300AD300AD300AD300Back Thinned CCD TBack Thinned CCD TBack Thinned CCD TBack Thinned CCD TBack Thinned CCD Tunableunableunableunableunable, TE Cooled Spectr, TE Cooled Spectr, TE Cooled Spectr, TE Cooled Spectr, TE Cooled Spectrometerometerometerometerometer

revised 6/03

• High QE From UV To NIR

• Large Dynamic Range

• Very Low Noise

• 512x122 CCD Format

• Cooled Stable Operation

• Dual Grating Turret Spectrograph

• High Spectral Resolution

The AD300 is a CCD spectrometer system specifically designed for low light

level detection, such as fluorescence and Raman applications. The system

consists of a back-thinned area CCD array, which exhibits high quantum

efficiency and low noise. The array is cooled for noise reduction and long-term

stable operation. The CCD is coupled to a dual grating tunable spectrograph

with computer control to both select grating and wavelength.

The AD300 comes preloaded with two gratings and slit tailored for high-

resolution work throughout the usable range of the detector. Either or both

gratings may be user specified to achieve resolution and desired bandwidth

window onto the array. The standard dual function entrance can accept light

directly coupled through the built-in slit or from a standard fiber. The standard

model comes with a 20µm slit for the highest resolution performance. In

general, in order to maximize thruput, the grating should be selected to

determine bandwidth needed and the largest possible slit should be selected

that produces an acceptable resolution. For a full list of standard available

gratings, please see the grating section in the Appendix A. Other gratings are

available as special orders.

LoLoLoLoLow Light Lew Light Lew Light Lew Light Lew Light Levvvvvel Detection,el Detection,el Detection,el Detection,el Detection,TTTTTunable CCD Spectrunable CCD Spectrunable CCD Spectrunable CCD Spectrunable CCD Spectrometerometerometerometerometer


SPECTRAL PRODUCTS


Sp

ectrumA

nalyzersD

etectionSystem

sS

amp

ling

Accessories

Ap

pend

ixP


eterB

asics

Monochrom


Fibers &

Coup

lersA

pp

lication

& Selection

Sp

ecto

rmete

rsA

uto

matic

Filter Wheels

Light

Sources

revised 6/03


AD300AD300AD300AD300AD300 Back Thinned CCD Tunable Spectrometer

Grating efficiency curves of standard gratings.1200 groove/mm blazed at 200nm and 500nm.

Specifications:Specifications:Specifications:Specifications:Specifications:CCD Camera (AD202)CCD Camera (AD202)CCD Camera (AD202)CCD Camera (AD202)CCD Camera (AD202)Spectral range:Spectral range:Spectral range:Spectral range:Spectral range: 200 to 1100nm tunableNumber of pixels:Number of pixels:Number of pixels:Number of pixels:Number of pixels: 512 x 122Pixel size:Pixel size:Pixel size:Pixel size:Pixel size: 24 by 24µmWell Depth (eWell Depth (eWell Depth (eWell Depth (eWell Depth (e-----):):):):):

Unbinned:Unbinned:Unbinned:Unbinned:Unbinned: >300,000Binned:Binned:Binned:Binned:Binned: >600,000

Read Noise (eRead Noise (eRead Noise (eRead Noise (eRead Noise (e-----):):):):): 10-15 (typical)Dark Count (eDark Count (eDark Count (eDark Count (eDark Count (e-----/pixel/s):/pixel/s):/pixel/s):/pixel/s):/pixel/s): 4-5@ -20°CDynamic Range:Dynamic Range:Dynamic Range:Dynamic Range:Dynamic Range: >86dBDigital Resolution:Digital Resolution:Digital Resolution:Digital Resolution:Digital Resolution: 16-bit (50kHz)Exposure Time:Exposure Time:Exposure Time:Exposure Time:Exposure Time: 0.03 - 10,400 sec.

(0.010 sec. increments)Cooling:Cooling:Cooling:Cooling:Cooling: -20°C or software programmable to

45°C below ambient.Temperature Stability:Temperature Stability:Temperature Stability:Temperature Stability:Temperature Stability: ±0.1°COperating Environment:Operating Environment:Operating Environment:Operating Environment:Operating Environment:

Temperature:Temperature:Temperature:Temperature:Temperature: -30° to 80° FRelative humidity:Relative humidity:Relative humidity:Relative humidity:Relative humidity: 10 to 90% noncondensing

PC Interface:PC Interface:PC Interface:PC Interface:PC Interface: Parallel port. 10' cable included.Software:Software:Software:Software:Software: KestralSpec

(see Detection Systems section)Options:Options:Options:Options:Options: Remote trigger; remote shutter.

Tunable SpectrographTunable SpectrographTunable SpectrographTunable SpectrographTunable SpectrographDesign:Design:Design:Design:Design: Czerny-Turner, dual grating turretsf#:f#:f#:f#:f#: 3.9Focal length:Focal length:Focal length:Focal length:Focal length: 140mmWavelength accuracy:Wavelength accuracy:Wavelength accuracy:Wavelength accuracy:Wavelength accuracy: 0.2nmWavelength precision:Wavelength precision:Wavelength precision:Wavelength precision:Wavelength precision: 0.2nm

Gratings:Gratings:Gratings:Gratings:Gratings: 1200 grooves /mm at 200nm and1200 grooves /mm at 500nm standard

Stray light rejection:Stray light rejection:Stray light rejection:Stray light rejection:Stray light rejection: better than 10-4

Total Weight:Total Weight:Total Weight:Total Weight:Total Weight: 10lbs.Computer Control:Computer Control:Computer Control:Computer Control:Computer Control: RS232Light entrance:Light entrance:Light entrance:Light entrance:Light entrance: Dual SMA/20µm slits standard.

Other slit or fiber connections available.Available slit sizes:Available slit sizes:Available slit sizes:Available slit sizes:Available slit sizes: 20µm standard. 50µm,

100µm, 0.125mm, 0.150mm, 0.3mm, 0.6mm,1.2mm, and 2.4mm, available.

System RequirementsSystem RequirementsSystem RequirementsSystem RequirementsSystem RequirementsPentium with 16Mb RAM (more recommended)Windows 98/ME/2000/XPUSB Port (for software key)RS232 portParallel port

��

��

��

��

��

�

��

��m��

��

��

��

!"

!��"

#�$

�

��

GratingGratingGratingGratingGrating Spectrograph centerSpectrograph centerSpectrograph centerSpectrograph centerSpectrograph center Resolution (nm) for slits:Resolution (nm) for slits:Resolution (nm) for slits:Resolution (nm) for slits:Resolution (nm) for slits:groove/mmgroove/mmgroove/mmgroove/mmgroove/mm set wavelength (nm)set wavelength (nm)set wavelength (nm)set wavelength (nm)set wavelength (nm) Bandwidth (nm)Bandwidth (nm)Bandwidth (nm)Bandwidth (nm)Bandwidth (nm) 20µm20µm20µm20µm20µm 0.125mm0.125mm0.125mm0.125mm0.125mm 0.3mm0.3mm0.3mm0.3mm0.3mm

1200 250 68 0.2 1 2

500 63 0.2 < 1 2

1050 44 0.1 < 1 < 2

600 250 140 0.4 < 2 5

500 136 0.4 2 5

1050 125 0.3 2 5

300 250 283 0.8 4 10

500 280 0.8 4 10

1050 272 0.8 4 9


SPECTRAL PRODUCTS


Sp

ectrumA

nalyzersD

etectionSystem

sS

amp

ling

Accessories

Ap

pend

ixP


eterB

asics

Monochrom


Fibers &

Coup

lersA

pp

lication

& Selection

Sp

ecto

rmete

rsA

uto

matic

Filter Wheels

Light

Sources

The SM300 is an integrated CCD spectrometer system specifically designed for low light level fluorescence and Ramanmeasurements. The system consists of the AD300 high performance wavelength tunable CCD spectrometer, the AST-XEtunable excitation light source, the AT-SHC4 cuvette sample chamber, and computer interface with Windows basedoperation software. The modular design allows the components to be decoupled and used individually, or in connectionwith a variety of sampling accessories for fluorescence, Raman, reflectance, transmittance, absorbance, and emission

measurements. The versatility of the system is further enhanced by optic fiber coupling capability for unique applications.

TTTTTunable Spectrunable Spectrunable Spectrunable Spectrunable SpectrometerometerometerometerometerThe AD300 module uses a back-thinned area CCD array, which exhibits high quantum efficiency and low noise. The

array is cooled for noise reduction and long-term stable operation. The CCD is coupled to a small CM based dual gratingtunable spectrograph with computer control to both select grating and wavelength. Gratings and slit should be specifiedby user for optimum performance. The AD300 module may be substituted with one of our larger DK series triple gratingspectrographs and cooled CCD camera.

SM300SM300SM300SM300SM300Modular Fluorescence / Raman SpectrometerModular Fluorescence / Raman SpectrometerModular Fluorescence / Raman SpectrometerModular Fluorescence / Raman SpectrometerModular Fluorescence / Raman Spectrometer

• High QE Back-thinned CCD

Spectrometer

• High Dynamic Range

• Low Noise

• Versitile Modular Design

• Flexible Fiber Coupling Optional

• Dual or Triple Grating for High

Resolution Operation

High Quantum EfficiencyHigh Quantum EfficiencyHigh Quantum EfficiencyHigh Quantum EfficiencyHigh Quantum EfficiencyBack-thinned CCD SpectrometerBack-thinned CCD SpectrometerBack-thinned CCD SpectrometerBack-thinned CCD SpectrometerBack-thinned CCD Spectrometer

revised 6/03

GratingGratingGratingGratingGrating Spectrograph centerSpectrograph centerSpectrograph centerSpectrograph centerSpectrograph center Resolution (nm) for slits:Resolution (nm) for slits:Resolution (nm) for slits:Resolution (nm) for slits:Resolution (nm) for slits:groove/mmgroove/mmgroove/mmgroove/mmgroove/mm set wavelength (nm)set wavelength (nm)set wavelength (nm)set wavelength (nm)set wavelength (nm) Bandwidth (nm)Bandwidth (nm)Bandwidth (nm)Bandwidth (nm)Bandwidth (nm) 20µm20µm20µm20µm20µm 0.125mm0.125mm0.125mm0.125mm0.125mm 0.3mm0.3mm0.3mm0.3mm0.3mm

1200 250 68 0.2 1 2

500 63 0.2 < 1 2

1050 44 0.1 < 1 < 2

600 250 140 0.4 < 2 5

500 136 0.4 2 5

1050 125 0.3 2 5

300 250 283 0.8 4 10

500 280 0.8 4 10

1050 272 0.8 4 9

Grating should be selected to give the desired bandwidth. The largest possible slit should be selected that produces an acceptable resolution.


SPECTRAL PRODUCTS


Sp

ectrumA

nalyzersD

etectionSystem

sS

amp

ling

Accessories

Ap

pend

ixP


eterB

asics

Monochrom


Fibers &

Coup

lersA

pp

lication

& Selection

Sp

ecto

rmete

rsA

uto

matic

Filter Wheels

Light

Sources

revised 6/03


SM300SM300SM300SM300SM300 Fluorescence/Raman SpectrometerSM300-DKSPSM300-DKSPSM300-DKSPSM300-DKSPSM300-DKSP SM300 with triple grating capabilitySM300-DKSP-ISM300-DKSP-ISM300-DKSP-ISM300-DKSP-ISM300-DKSP-I SM300-DKSP with imaging capability

TTTTTunable Exunable Exunable Exunable Exunable Excitcitcitcitcitation Light Souration Light Souration Light Souration Light Souration Light SourcececececeThe AST-XE wavelength

tunable light source consists

of a xenon source coupled to

a CM110 computer controlled

monochromator for high

excitation power output.

Comes standard with two high-

resolution gratings for good coverage 200-1100 nm and

user changeable slit set. Ozone blocking Xenon source

available.

CenterCenterCenterCenterCenter Slit width = 0.125mm Slit width = 0.125mm Slit width = 0.125mm Slit width = 0.125mm Slit width = 0.125mm Slit width = 2.4mm Slit width = 2.4mm Slit width = 2.4mm Slit width = 2.4mm Slit width = 2.4mm

WWWWWaaaaavvvvvelengthelengthelengthelengthelength Bandpass (nm)Bandpass (nm)Bandpass (nm)Bandpass (nm)Bandpass (nm) PPPPPooooowwwwwer (µW)er (µW)er (µW)er (µW)er (µW) Bandpass (nm)Bandpass (nm)Bandpass (nm)Bandpass (nm)Bandpass (nm) PPPPPooooowwwwwer (mW)er (mW)er (mW)er (mW)er (mW)

ASTASTASTASTAST-XE-175EX (200-1-XE-175EX (200-1-XE-175EX (200-1-XE-175EX (200-1-XE-175EX (200-11111100 nm)00 nm)00 nm)00 nm)00 nm)

200nm 0.9 0.2 17.3 0.9

500nm 0.8 2.9 15.6 10.0

Specifications:Specifications:Specifications:Specifications:Specifications:AD300 CCD SpectrometerAD300 CCD SpectrometerAD300 CCD SpectrometerAD300 CCD SpectrometerAD300 CCD SpectrometerCCD Detector (AD202)CCD Detector (AD202)CCD Detector (AD202)CCD Detector (AD202)CCD Detector (AD202)Spectral Range:Spectral Range:Spectral Range:Spectral Range:Spectral Range: 200nm to 1100nmArray (pixels):Array (pixels):Array (pixels):Array (pixels):Array (pixels): 512x122 standardPixel Size (µm):Pixel Size (µm):Pixel Size (µm):Pixel Size (µm):Pixel Size (µm): 24Well Depth (e-):Well Depth (e-):Well Depth (e-):Well Depth (e-):Well Depth (e-): UnbinnedUnbinnedUnbinnedUnbinnedUnbinned >300,000 BinnedBinnedBinnedBinnedBinned >600,000Read Noise (e-):Read Noise (e-):Read Noise (e-):Read Noise (e-):Read Noise (e-): 10-15 (typical)Dark Count (e-/pixel/sec):Dark Count (e-/pixel/sec):Dark Count (e-/pixel/sec):Dark Count (e-/pixel/sec):Dark Count (e-/pixel/sec): 4-5 @ -20° CExposure Time:Exposure Time:Exposure Time:Exposure Time:Exposure Time: 0.03 seconds to 10,400 sec.

(0.010 second increments).Cooling Cooling Cooling Cooling Cooling : -20°C or programmable down to

45° C below ambient temperature.Temperature Stability:Temperature Stability:Temperature Stability:Temperature Stability:Temperature Stability: ±0.1°CSoftware:Software:Software:Software:Software: KestralSpec

(see Detection Systems section)PC Interface:PC Interface:PC Interface:PC Interface:PC Interface: Parallel port, 10' cable included.Operating Environment:Operating Environment:Operating Environment:Operating Environment:Operating Environment:

TemperatureTemperatureTemperatureTemperatureTemperature -30° to 80° F.Relative humidityRelative humidityRelative humidityRelative humidityRelative humidity 10 to 90% noncondensing

Optical SystemOptical SystemOptical SystemOptical SystemOptical SystemDesign:Design:Design:Design:Design: Czerny-Turner, dual grating turretsfffff#:#:#:#:#: 3.9Focal length:Focal length:Focal length:Focal length:Focal length: 140mmWavelength accuracy:Wavelength accuracy:Wavelength accuracy:Wavelength accuracy:Wavelength accuracy: 0.2 nmWavelength precision:Wavelength precision:Wavelength precision:Wavelength precision:Wavelength precision: 0.2 nmSlit:Slit:Slit:Slit:Slit: 20µm, 50µm, 100µm, 0.125mm,

0.150mm, 0.3mm, 0.6mm, 1.2mm,and 2.4mm, please specify.

Stray light rejection:Stray light rejection:Stray light rejection:Stray light rejection:Stray light rejection: better than 10-4

System RequirementsSystem RequirementsSystem RequirementsSystem RequirementsSystem RequirementsPentium with 16Mb RAM (more recommended)Windows 98/ME/2000/XPUSB Port (for software key)Parallel portTwo RS232 ports (one may be eliminated by useof the DK1200 CM Controller, see CM SeriesOptions section)

FFFFFour Pour Pour Pour Pour Port Sampleort Sampleort Sampleort Sampleort SampleChamberChamberChamberChamberChamber

The AT-SCH4 comes configured

with broadband optics optimized for

the right-angle measurement

configuration.

�� !��

��

�"#��

��$%��$��

�&'

��'

Dimensions of layout of SM300


SPECTRAL PRODUCTS


Sp

ectrumA

nalyzersD

etectionSystem

sS

amp

ling

Accessories

Ap

pend

ixP


eterB

asics

Monochrom


Fibers &

Coup

lersA

pp

lication

& Selection

Sp

ecto

rmete

rsA

uto

matic

Filter Wheels

Light

Sources

SM30SM30SM30SM30SM3011111PbS ArrPbS ArrPbS ArrPbS ArrPbS Arraaaaay Spectry Spectry Spectry Spectry Spectrometerometerometerometerometer

• Low Noise

• Cooled, Stable Operation

• 256 Detection Elements

• Accommodates spectral

measurements in the

1 to 3 micron range.

• Optical input direct to slit

or via fiber.

The SM301 is a versatile, high performance PbS array spectrometer. Its

active components include a TE cooler and a 256-element PbS detector element

array. Operation of the unit for research applications is easy with the included

Windows based SM32Pro-based analysis software. The system is ideal for

spectroscopic applications in the 1 to 3 micron region.

Available system options include a built-in high-speed shutter and optical

blank pixels for setting dark current offsets. The SM301 includes thermoelectric

cooling to guarantee long-term operational stability.

The Choice fThe Choice fThe Choice fThe Choice fThe Choice for IR Spectror IR Spectror IR Spectror IR Spectror IR SpectralalalalalApplicationsApplicationsApplicationsApplicationsApplications

revised 6/03


SPECTRAL PRODUCTS


Sp

ectrumA

nalyzersD

etectionSystem

sS

amp

ling

Accessories

Ap

pend

ixP


eterB

asics

Monochrom


Fibers &

Coup

lersA

pp

lication

& Selection

Sp

ecto

rmete

rsA

uto

matic

Filter Wheels

Light

Sources

General DescriptionGeneral DescriptionGeneral DescriptionGeneral DescriptionGeneral DescriptionThe SM301 is a complete compact PbS array

Spectrometer for use with a PC to perform spectral

measurements in the region of 1 to 3 microns.

It consists of four parts: 1. an entrance mechanism

with a built-in slit, a fiber coupling adapter, and an order

sorting filter; 2. a spectrograph of a crossed Czerny-

Turner arrangement using high quality optics; 3. a linear

lead sulfite sensor array and driving circuitry; 4. a computer

interface for data acquisition.

All the optical components and driving electronics

are enclosed in an aluminum housing for stable operation.

A thermal electric (TE) cooler is also included.

ApplicationApplicationApplicationApplicationApplicationThe SM301 employs a multiplexed PbS array as its NIR

detection element. The array is cooled and temperature

stabilized at -10 oC which ensures a long-term operation

stability. A built-in mechanical shutter mechanism is controlled

by the system clock and is synchronized with the array

readout operation. Dark signal can thus be automatically

measured by the built-in electronics periodically and subtracted

automatically. Compared with conventional scanning NIR

spectrometers the SM301 provides the multichannel

detection advantage, both in reducing the measurement time

and enhancing measurement signal-to-noise ratio. The SM301

can operate at a readout rate of 100 kHz or faster allowing fast

measurement and averaging operation to be performed in a

short period of time.

A variety of accessories makes the SM301 versatile for

process control, spectroscopy, environmental monitoring,

and other applications. It can easily be configured for

transmission, reflectance, absorbance, and other

measurements. The wavelength range from 1 to 3 µm can be

covered by one grating optimized for the wavelength range.

The spectral range can also be factory configured to meet

application needs.

The SM301 can accept light directly coupled through a

built-in slit, from a fiber through an SMA coupler or both. The

fiber coupling ability makes the unit flexible for remote and

process control applications. Where high mobility is required,

the SM301 can be used with just a slit to eliminate the light

transfer variations caused by the changes in fiber bending

curvatures. As a result, attenuation resulting from the use of

optical fibers can also be avoided.

Specifications:Specifications:Specifications:Specifications:Specifications:Number of pixels:Number of pixels:Number of pixels:Number of pixels:Number of pixels: 256Pixel size:Pixel size:Pixel size:Pixel size:Pixel size: 45 by 450µmPeak responsivity:Peak responsivity:Peak responsivity:Peak responsivity:Peak responsivity: 1x106 V/wattSpectral response range:Spectral response range:Spectral response range:Spectral response range:Spectral response range: 1000 to 3000nmSpectral coverage:Spectral coverage:Spectral coverage:Spectral coverage:Spectral coverage: about 600nm in user

specified regionSpectral Resolution:Spectral Resolution:Spectral Resolution:Spectral Resolution:Spectral Resolution: 20nm with standard module

and slit option.Light entrance:Light entrance:Light entrance:Light entrance:Light entrance: Slit:Slit:Slit:Slit:Slit: 50µm to 400µm Fiber:Fiber:Fiber:Fiber:Fiber: SMA 905 fiber coupler

50µm to 600µm core diameterNA = 0.2

Grating:Grating:Grating:Grating:Grating: 75 to 1200 grooves per mmStray light rejection:Stray light rejection:Stray light rejection:Stray light rejection:Stray light rejection: better than 10-3

Analog to digital:Analog to digital:Analog to digital:Analog to digital:Analog to digital: 12-bit resolution,PCMCIA standard

Dynamic range:Dynamic range:Dynamic range:Dynamic range:Dynamic range: >1000:1 for single scanDimensions:Dimensions:Dimensions:Dimensions:Dimensions: 5” x 4” x 2.5” (LxWxH)Shutter:Shutter:Shutter:Shutter:Shutter: Built-inDetector cooling:Detector cooling:Detector cooling:Detector cooling:Detector cooling: -10°CWeight:Weight:Weight:Weight:Weight: 2 lbs.Software:Software:Software:Software:Software: SM32Pro


SM301SM301SM301SM301SM301 PbS Array Spectrometer

�$�� $��

��

(��

�� )�� !%��

�� *

SM301 Optical Path

revised 6/03


SPECTRAL PRODUCTS


Sp

ectrumA

nalyzersD

etectionSystem

sS

amp

ling

Accessories

Ap

pend

ixP


eterB

asics

Monochrom


Fibers &

Coup

lersA

pp

lication

& Selection

Sp

ecto

rmete

rsA

uto

matic

Filter Wheels

Light

Sources

SM302 / SM302-EXSM302 / SM302-EXSM302 / SM302-EXSM302 / SM302-EXSM302 / SM302-EXInGaAs ArrInGaAs ArrInGaAs ArrInGaAs ArrInGaAs Arraaaaay Spectry Spectry Spectry Spectry Spectrometerometerometerometerometer

revised 8/03

• 0.9 to 1.7 µm or

0.9 to 2.6µm Extended

• Cooled Stable Operation

• Large Dynamic Range

• 16 bit Data Acquisition

• Low Noise

• Fiber Coupling Capability

The SM302 is a versatile, high performance, compact InGaAs array

spectrometer that consists of a low noise, 256-element, InGaAs array

detection module, a high precision tunable spectrograph optimized for the

spectral range of 0.9 to 1.7µm (0.9 to 2.6µm extended), a 16-bit data

acquisition board, and Windows® based operating software.

The dual grating capacity spectrometer comes preloaded with one grating

and slit tailored for high-resolution work throughout the usable range of the

detector. An optional second grating may be loaded to add wide coverage

capability, or both gratings may be user specified to achieve desired coverage

and resolution. Integrated filters allow the user to selectively block out

unwanted higher orders, and the standard dual function entrance can accept

light directly coupled through the built-in slit or from a standard NIR fiber.

The SM302 detector is a multiplexed InGaAs array that is thermoelectrically

cooled and temperature stabilized to ensure long-term operation stability. The

multichannel detection with a readout rate of 333 kHz or faster both reduces

measurement time and enhances signal-to-noise ratio.

Compact, TCompact, TCompact, TCompact, TCompact, Tunableunableunableunableunable, NIR Spectr, NIR Spectr, NIR Spectr, NIR Spectr, NIR Spectrometerometerometerometerometer


SPECTRAL PRODUCTS


Sp

ectrumA

nalyzersD

etectionSystem

sS

amp

ling

Accessories

Ap

pend

ixP


eterB

asics

Monochrom


Fibers &

Coup

lersA

pp

lication

& Selection

Sp

ecto

rmete

rsA

uto

matic

Filter Wheels

Light

Sources

revised 6/03


SM302SM302SM302SM302SM302 InGaAs Array SpectrometerSM302-EXSM302-EXSM302-EXSM302-EXSM302-EX Extended range InGaAs Array Spectrometer

Spectrograph:Spectrograph:Spectrograph:Spectrograph:Spectrograph:Resolution:Resolution:Resolution:Resolution:Resolution: <2nm with standard configurationLight entrance:Light entrance:Light entrance:Light entrance:Light entrance: Dual SMA/ 50µm slit standard.Other slit or fiber connections options availableAvailable slit sizes:Available slit sizes:Available slit sizes:Available slit sizes:Available slit sizes: 50µm standard. 100µm,

0.125mm, 0.150mm, 0.3mm, 0.6mm,1.2mm, and 2.4mm, available.

f#:f#:f#:f#:f#: 3.9Grating:Grating:Grating:Grating:Grating: One 600 groove grating included.Additional gratings available upon requestGrating control:Grating control:Grating control:Grating control:Grating control: RS232Filtering:Filtering:Filtering:Filtering:Filtering: Permanent 0.9 µm low blocking filterincluded. 1.3 µm low blocking flip-filter included inextended model.Dimensions:Dimensions:Dimensions:Dimensions:Dimensions: 10.5” x 5” x 4” (LxWxH)WWWWWeight:eight:eight:eight:eight: 6.5 lb.Software:Software:Software:Software:Software: Windows control program and

LabVIEW. drivers included.

StandardStandardStandardStandardStandard ExtendedExtendedExtendedExtendedExtended

DetectorDetectorDetectorDetectorDetector Hamamatsu InGaAs Array

RangeRangeRangeRangeRange 0.9 to 1.7 µm 0.9 to 2.55 µm

Number of pixelsNumber of pixelsNumber of pixelsNumber of pixelsNumber of pixels 256

Pixel sizePixel sizePixel sizePixel sizePixel size 50 by 250µm

Bad PixelsBad PixelsBad PixelsBad PixelsBad Pixels 2% max 5% max

PPPPPeak sensitivityeak sensitivityeak sensitivityeak sensitivityeak sensitivity 1.55µm 2.3µm

PPPPPeak reak reak reak reak responsivityesponsivityesponsivityesponsivityesponsivity 0.95 A/W 1.1 A/W

Dynamic rangeDynamic rangeDynamic rangeDynamic rangeDynamic range 10,000:1 8,000:1

Analog to digitalAnalog to digitalAnalog to digitalAnalog to digitalAnalog to digital 16-bit PCI interface, 333 kHz

Integration TimeIntegration TimeIntegration TimeIntegration TimeIntegration Time Min: 5ms Max: 10s

CoolingCoolingCoolingCoolingCooling -10°C one stage TE -20°C two stage TE

Dark CurrentDark CurrentDark CurrentDark CurrentDark Current 0.1 pA typ. 1000 pA typ.

Noise mV rmsNoise mV rmsNoise mV rmsNoise mV rmsNoise mV rms 0.15 0.18

MaximumMaximumMaximumMaximumMaximum

non-uniformity non-uniformity non-uniformity non-uniformity non-uniformity ± 5% max ± 10% max

Detector SpecificationsDetector SpecificationsDetector SpecificationsDetector SpecificationsDetector Specifications

GratingGratingGratingGratingGrating BandwidthBandwidthBandwidthBandwidthBandwidth ResolutionResolutionResolutionResolutionResolution

groove/mmgroove/mmgroove/mmgroove/mmgroove/mm PPPPPeak (nm)eak (nm)eak (nm)eak (nm)eak (nm) (nm)(nm)(nm)(nm)(nm) (nm)(nm)(nm)(nm)(nm) StatusStatusStatusStatusStatus

600 1200 126 <1 INCLUDED SM302

1600 113 INCLUDED SM302-EX

1850 97 special order


300 1200 280 <2 special order


2000 260 STOCK

2500 250 STOCK

150 1250 580 4 STOCK



75 1700 1170 8 STOCK



45 1750 1970 13 STOCK


SPECTRAL PRODUCTS


Sp

ectrumA

nalyzersD

etectionSystem

sS

amp

ling

Accessories

Ap

pend

ixP


eterB

asics

Monochrom


Fibers &

Coup

lersA

pp

lication

& Selection

Sp

ecto

rmete

rsA

uto

matic

Filter Wheels

Light

Sources

SM520SM520SM520SM520SM520ExtrExtrExtrExtrExtreme Resolution CCD Spectreme Resolution CCD Spectreme Resolution CCD Spectreme Resolution CCD Spectreme Resolution CCD Spectrometerometerometerometerometer

• Optical input direct to slit

or via fiber .

• Allows higher resolution spectral

measurements in up to a 700nm

measurement window between

200nm and 1050nm — double the

resolution of the SM200 and SM240.



The SM520 is a CCD based spectrometer that offers more than double the

resolution of the SM240. This resolution is achieved using oversized (30mm x

30mm) optical-bench components. These components offer approximately 4

times the effective collimation, grating and focusing area than what is used in the

SM200 and SM240. As with all spectrometers, effective resolution increases

as window size decreases. A 100nm window will have approximately .09nm

resolution (as opposed to .3nm for the SM200 and SM240). A 700 nm window

will have approximately .56nm resolution (as opposed to 1.12 nm for the SM200

and SM240).

Standard interfaces include a USB 2.0 interface with 16-bit extended dynamic

range and a PCI card interface with 12-bit dynamic range. Custom interfaces and

legacy ISA and PCMCIA interfaces are also available. Software support includes a

SDK and DLLs for dedicated applications development and our SM32Pro windows

based spectral acquisition and analysis software. Both standard and legacy

interface designs provide support for advanced acquisition programming and

external triggering.

The Choice fThe Choice fThe Choice fThe Choice fThe Choice for Spectror Spectror Spectror Spectror Spectral Applicationsal Applicationsal Applicationsal Applicationsal Applications

revised 6/03


SPECTRAL PRODUCTS


Sp

ectrumA

nalyzersD

etectionSystem

sS

amp

ling

Accessories

Ap

pend

ixP


eterB

asics

Monochrom


Fibers &

Coup

lersA

pp

lication

& Selection

Sp

ecto

rmete

rsA

uto

matic

Filter Wheels

Light

Sources

revised 6/03


SM520 USBSM520 USBSM520 USBSM520 USBSM520 USB USB interface, SpectrometerSM520 PCISM520 PCISM520 PCISM520 PCISM520 PCI PCI interface, Spectrometer


Sony CCD Linear ArraySony CCD Linear ArraySony CCD Linear ArraySony CCD Linear ArraySony CCD Linear ArrayNumber of Pixels: 2048Sensing Pixel Size: 14µm x 200µmSensitivity: 1800 V/(lx•s) @ 660nmCustomer array installation availableCustomer array installation availableCustomer array installation availableCustomer array installation availableCustomer array installation available

Dimensions (inches):Dimensions (inches):Dimensions (inches):Dimensions (inches):Dimensions (inches): 7.0 h x 6.75 w x 3.0 dWeight:Weight:Weight:Weight:Weight: 4.0 lbs.Spectral Range:Spectral Range:Spectral Range:Spectral Range:Spectral Range: UV - 200nm to 450nm

VIS - 380nm to 760nmNIR - 550nm to 1050nm

other ranges are configurablefrom 200nm to 1050nm

Spectral Resolution:Spectral Resolution:Spectral Resolution:Spectral Resolution:Spectral Resolution: ~0.1nm, dependent onspectral range, slit width, and fiber diameter.

Entrance:Entrance:Entrance:Entrance:Entrance:FiberFiberFiberFiberFiber SMA 905 or FC fiber coupler.

50-600µm core Ø fiberNA = 0.2

SlitSlitSlitSlitSlit 10, 25, 50 or 100µmDynamic Range:Dynamic Range:Dynamic Range:Dynamic Range:Dynamic Range: 12 bit (4096:1) or

16 bit (65536:1)Computer Interface:Computer Interface:Computer Interface:Computer Interface:Computer Interface:

USB 2.0USB 2.0USB 2.0USB 2.0USB 2.0 16 bit 500KHzPCI busPCI busPCI busPCI busPCI bus NI-PCI 12 bit 200 KHz


Temperature Range:Temperature Range:Temperature Range:Temperature Range:Temperature Range: 15°C to 40°CSoftware:Software:Software:Software:Software: SM32Pro

SoftwareSoftwareSoftwareSoftwareSoftware✓✓✓✓✓ SM32Pro - Windows® 98,2000, XP

based software for data acquisitionand analysis.

✓✓✓✓✓ Transmission, reflectance, and absorbancemeasurements.

✓✓✓✓✓ Data export, zoom in and out, spectrum overlays, and many more features.

✓✓✓✓✓ Color analysis tools included.✓✓✓✓✓ Signal average and integration time control.✓✓✓✓✓ Double beam version available.✓✓✓✓✓ SDK and DLLs available for easy custom

software development.

Software


SPECTRAL PRODUCTS


Sp

ectrumA

nalyzersD

etectionSystem

sS

amp

ling

Accessories

Ap

pend

ixP


eterB

asics

Monochrom


Fibers &

Coup

lersA

pp

lication

& Selection

Sp

ecto

rmete

rsA

uto

matic

Filter Wheels

Light

Sources

revised 6/03

SpectrSpectrSpectrSpectrSpectraM AaM AaM AaM AaM Accessoriesccessoriesccessoriesccessoriesccessories

AT200720AT200720AT200720AT200720AT200720 Filter for removing second orders for 200 to 720nm.

AT3501050AT3501050AT3501050AT3501050AT3501050 Filter for removing second orders for 350 to 1050nm.

AT-450AT-450AT-450AT-450AT-450 Reflectance attachment, built-in light source, 45° illuminating

and 0° viewing geometry for SM200, 220, and 240.

AT-COSAT-COSAT-COSAT-COSAT-COS Cosine Corrector for measurement of filtered off-angle light.

The fused silica dome shaped diffuser gives excellent

transmission in the visible region and adequate

transmission in the UV region.

AT-CRTAT-CRTAT-CRTAT-CRTAT-CRT CRT attachment for SM200 and 240.

AT-DIFAT-DIFAT-DIFAT-DIFAT-DIF Diffuser mounts directly to the SM Series spectrometers.

Offered with a ground quartz diffuser as standard, up to

3 - 0.5" Ø by 1.5mm thick ND filters can be added

to the assembly.

AT-IS-1.5AT-IS-1.5AT-IS-1.5AT-IS-1.5AT-IS-1.5 Stand alone or directly attachable Integrating sphere (1.5"sphere).

AT-UVEAT-UVEAT-UVEAT-UVEAT-UVE UV enhancement coating for detector array.

AT-IREAT-IREAT-IREAT-IREAT-IRE IR enhancement coating for detector array.

NI-xxxNI-xxxNI-xxxNI-xxxNI-xxx 100 KHz PCM(CIA), PCI or ISA data acquisition

board with cable.

SM500SM500SM500SM500SM500 Conversion box with cable for accepting NI- PCM(CIA),

PCI and ISA computer interfaces.

AT-DIF DiffuserAT-COS Cosine Corrector

SM2xx Spectrometer

AT-DIF

Adapter

AT-COS

AT-IS-1.5 Integrating Sphere


SPECTRAL PRODUCTS


Sp

ectrumA

nalyzersD

etectionSystem

sS

amp

ling

Accessories

Ap

pend

ixP


eterB

asics

Monochrom


Fibers &

Coup

lersA

pp

lication

& Selection

Sp

ecto

rmete

rsA

uto

matic

Filter Wheels

Light

Sources

SM32Pro SoftwareSM32Pro SoftwareSM32Pro SoftwareSM32Pro SoftwareSM32Pro Software• Displays percent of reflectance.• Calculates XYZ, Yxy, L*a*b*, L*C*hº, ∆L*a*b*,

∆L*C*h*, ∆ELab and ∆ECMC

• Illuminant conditions A and D65.• CIE 2º and 10º standard observers.• View up to 6 reflectance traces on a single graph,

with multiple graphs tiled on a single screen.• Prints in color or black & white.• Offers easy custom wavelength calibration

function.• Control signal averages and integration time• Save color files, export color files, and print color

matching files.• Exports graph or data to other Windows™

software and to most DOS software.• Has rubber-band zoom and auto-peak find.• Features intuitive menu system and tool bars.• Includes comprehensive documentation• 16- and 32-bit Windows™ and DOS SDK software

developer libraries are available.

SpectraM 3.xSpectraM 3.xSpectraM 3.xSpectraM 3.xSpectraM 3.xGeneral-purpose data acquisition and processing

software for SM200, SM-210, SM-220 (b), and SM-240

units. SpectraM 3.x allows Reflectance,Transmission and

Absorbance measurements. Additionally CIE color values

such as X Y Z, and Lab, may be obtained-using A and D 65

illuminant conditions with the software package. Data may

be saved as a graph, or exported to ASCII text files for

import to spreadsheet applications for further analysis.

Graphing functions include zooming, basic text annotation,

and plot overlays on a single graph. Color values may be

compared to a user selectable standard in order to obtain

Delta values. Spectrometer calibration can be handled easily

through use of the software combined with a traceable light

source.

SpectraM-XLSpectraM-XLSpectraM-XLSpectraM-XLSpectraM-XLMicrosoft Excel macro supports SM 200, SM-210,

SM-220 (b), and SM-240 for data acquisition, graphics,

and data processing.

SpectraM SDKSpectraM SDKSpectraM SDKSpectraM SDKSpectraM SDK, 16 Bit & 32 BitAvailable for customers who wish to use SM hardware

with custom designed software. The SDKs are available in

16-bit and 32-bit formats, and include our dynamic linked

libraries in addition to several various code samples on how

to use the functions the DLLs contain. A manual that details

the functions available is also included.

revised 6/03


Date post:	17-Jan-2020
Category:	Documents
Upload:	others
View:	2 times
Download:	0 times

Spectrometer SM Series Spectrometers · 2017-02-08 · NIR - 550nm to 1050nm other ranges are...

Documents