Surface drill rig for marble, granite, sandstone and limestone in the dimension stone industry.

SPEEDROC 2F

SPEEDROC 2F IS A COMPLETE SOLUTION TO MEET OUR CUSTOMERS’ NEEDS FOR INCREASED PRODUCTIVITY AND REDUCED COSTS IN THE DIMENSION STONE INDUSTRY.

HIGH PRODUCTIVITYALL-IN-ONE

Reliable SpeedROC 2F is a productive drill rig for the dimension stone indus-try. It is highly productive thanks to its long reach and fast positioning. This

versatile machine has a flexible drilling capacity and excellent tramming stabil-ity. It is the perfect choice for granite, marble and limestone quarries.

MAIN BENEFITS

Fast drilling and positioning gives high productivity

360° coverage area saves time in tramming and positioning

The long boom reach is optimized for bench drilling and block dressing

2 3

ATLAS COPCO SERVICEEven the best equipment requires regular service to ensure optimal performance. Atlas Copco provides service solutions to safeguard an optimized relation-ship between productivity, availability and opera-tional cost. Atlas Copco Mining and Rock Excavation Technique has over 3 300 technicians located in over 80 countries. By combining the usage of Atlas Copco genuine parts with service provided by a certi-fied Atlas Copco technician, you’ll have a winning combination no matter of where in the world you operate.

AN ON-SHELF SOLUTIONWITH PRODUCTIVITY IN MINDSPEEDROC 2F IS AN ON-SHELF, CE-MARKED SOLUTION THAT ASSURES FAST AND ACCURATE DRILLING WITH WELL PROVEN ROCK DRILLS. THIS ROTATABLE, RADIO REMOTE CONTROLLED DRILL RIG WILL LIVE UP TO YOUR EXPECTATIONS OF SAFETY AND PRODUCTIVITY.

TECHNICAL SPECIFICATIONS

• 6 cylinder Doosan DL06 engine Tier 3A/Tier 4 Final • Two hydraulic rock drills• Full Radio Remote Control (drilling/boom movement/tramming) • Two independent feed systems with rail bar• Four independent hydraulic stabilizer legs

• Device for asynchronous approach to the ground of the feeds• Fast system steel retainer• Dust Collection System• Electronic Control System (ECS)• Protective Guard according to EN 16228

MAIN COMPONENTS

FEEDChain feed, hydraulically driven Metric Imperial

Feed extension 600 mm 1’ 11 5⁄8”Feed force, max 6.5 kN 1461 lbfTractive pull, max 6.5 kN 1461 lbfTotal length 4 000–4 800 mm 13’ 15’’–15’ 9’’ Travel length 2 550–3 350 mm 8’ 4’’–10’ 11”

CARRIER

Metric Imperial

Tramming speed, max 9 km/h 5.6 mph

Tramming angle

Downward/upward 15° Cannot be combinedLaterally right/left 12°

Four wheel driveFour hydraulic stablizer legsGround clearance: Tier 3 350 mm 1’ 1 25⁄32”Ground clearance: Tier 4 335 mm 1’ 1 3⁄16”

ENGINEDoosan DL 06 Tier 3A/Doosan DL06P Tier 4 Final Metric ImperialPower rating @ 2 000 rpm 120 kW 161 hpPower rating @ 1 900 rpm 139 kW 186 hp

Available tophammer rock drill and hole range Metric Imperial DF 500X, DF530X 28–45 mm 1 1⁄8”–1 3⁄4”Starter rod drill steel

Hexagonal shape 22 mm 7⁄8”

Length 3.2–4 m 10.5’–13.12’

HOLE RANGE

DCT 110 D Metric ImperialFiltering area 11 m2 1 118 sq.ftSuction capacity 200 l/s 424 cfmNumber of filters 11 11Suction hose diameter 100–60 mm 4”–2 23⁄64”Auto-cleaning filters

DUST COLLECTOR

Pumps

Axial pistons variable displacement main pumps x 2 120 cc

Gear pilot pump 14 cc

HYDRAULIC SYSTEM

Metric ImperialHydraulic oil tank (Tier 3) 118 l 31.2 US galHydraulic oil tank (Tier 4) 128 l 33.8 US galHydraulic oil, total (Tier 3) 205 l 54.2 US galHydraulic oil, total (Tier 4) 207 l 54.7 US galCompressor oil 6.5 l 1.7 US galDiesel engine oil 27 l 7.1 US galDiesel tank (Tier 3) 350 l 92.5 US galDiesel tank (Tier 4) 292 l 77.1 US gal

VOLUMES

Voltage 24 VBatteries 2x12 V 100 AhAlternator 80 A

Additional working lights on drilling unit 2x70 WRear camera for trammingTramming lights

ELECTRICAL SYSTEM

CONTROL SYSTEMElectronically controlledRadio Remote Control (Tramming/boom movements/drilling)Drilling low start concerning feed force and percussionAutomatic Drilling deviceAdvanced anti jamming device

DRILLING UNIT

Oil heating systemOil cooling systemProportional control hydraulic valves

Atlas Copco Ekomak IML 00602 Metric ImperialAir flow 28.3 l/s 60 cfm Maximum pressure 8 bar 116 psi

COMPRESSOR

• Cameras• Automatic drilling device• Tramming by radio remote• Protective Guard• Horizontal drilling version

OPTIONAL EQUIPMENT

+ TWO IS BETTER THAN ONEIdeal for the dimension stone industry quarries, the SpeedROC 2F

is equipped with two well-proven hydraulic rock drills. It assures fast and intuitive positioning and high speed drilling, which provides an

impressive boost in productivity. The 360° rotatable boom swing saves time in both positioning and tramming.

+ UP TO THE VERTICAL CHALLENGEThe design of the SpeedROC 2F, a four-wheel drive rig, makes it a stable

partner for fast, steady movement even in difficult terrains. It is suitable both for vertical and optional horizontal drilling. For even safer drilling, it

is designed with four support legs that ensures the stability of the machine even when it is used to the maximum of its capacity.

+ SAFER OPERATIONSThe CE-market machine is a result of the cooperation between Atlas Copco

and Doosan, which meets our customers’ needs of reliability in the whole operation. The Radio Remote Control allows the operator to always work

in safe conditions and the optional tramming feature gives the advantage of easier positioning and a better overview of operations. Depending on condi-

tions and environmental rules, the dust collector or the water mist system ensures a better working environment.

54

TECHNICAL SPECIFICATIONSTECHNICAL SPECIFICATIONS

SpeedROC 2F

Protective guard for operator safety.

Metric Imperial

Height (H) 3 300 mm 10’ 10’’

Length (L) 11 000 mm 36’ 1”

Width (W) 2 550 mm 8’ 4’’

HEIGHT AND LENGTH

Metric Imperial

Standard unit excluding all options and drill steel, Tier 3

25 000 kg 55 115 lb

Standard unit excluding all options and drill steel, Tier 4

26 100 kg 57 540 lb

WEIGHT

360° coverage area saves time in tramming and positioning.

Long boom reach optimized for bench drilling and block dressing.

Fast drilling and positioning gives high productivity.

LW

H H

Drilling angles, side view

360°

300 mm

600 mm+/- 15°

+/- 20°

Drilling angles, front view

23.3 m2

11.3 m2 10.3 m2

23.3 m2

Maximum height, rail rotated 90°

5 260 mm

6 75

0 m

m

Maximum height

Minimum height

5 013 mm

3 550 mm

6 75

0 m

m

4 05

0 m

m

+/- 90°

6 7

98

51 3512 01 2015-0

9 Örebro, S

weden. Legal N

otice © C

opyright 2015, Atlas C

opco Rock D

rills AB

, Örebro, S

weden. A

ny unauthorized use or copying of the contents or any part thereof is prohibited. Illustrations and photos m

ay show equipm

ent with optional extras. N

o warranty is m

ade regarding specifications or otherwise. S

pecifications and equipment are subject to change w

ithout notice. Consult your A

tlas Copco C

ustomer

Center for specific inform

ation.

We stand by our responsibilities towards our customers, towards the environment and the people around us. We make performance stand the test of time.This is what we call – Sustainable Productivity.

www.atlascopco.com

COMMITTED TO SUSTAINABLE PRODUCTIVITY