All prices include GST in Australia, exclude GST in NZ, and are valid till 30 September 19 (after that only as long as stocks last and without any bonus item) SPECIALS I / 2019 EUROPEAN QUALITY TOOLS Hand tools UNIOR 623200 • contains side cutters (160 mm), combination pliers (180 mm) and long nose pliers (160 mm) • chrome plated surface, polished heads • two component cushion grip handle • supplied in pre-cut foam • cutting capacity side cutters and combination pliers: 1.6 - 2.5 mm (copper and medium wire) • cutting capacity long nose pliers: 1.6 - 2.0 mm (copper and medium wire) • serrated gripping surface on long nose pliers • made in Europe (Slovenia) 3 PIECE PLIERS SET MUST HAVE! $ 114.50 NEW SET! Hand tools 15 PIECE DOUBLE OPEN-END ELECTRIC WRENCH SET UNIOR 619287 • for fine mechanical and electronics work • forged, entirely hardened and tempered body • same size on both ends • heads offset • short, thin style (2-3 mm thickness at jaw) • contains sizes 3.2, 3.5, 4, 4.5, 5, 5.5, 6, 7, 8, 9, 10, 11, 12, 13 and 14 mm in roll pouch • made in Europe (Slovenia) • all sizes also available individually for replacements $ 108.50 NEW SET! $ 129.00 Hand tools AUTOMATIC SPRING CLIP PLIERS WITH BOWDEN CABLE UNIOR 620234 • for hose clips on cooling, heating, fuel or screen-washer systems of most cars • fits most standard size clamps from 18 to 54 mm • 600 mm bowden cable for use in hard to reach places where clips can’t be reached with other pliers • position lock facilitates easy replacement of hose clamps • pliers include a toothed blocker with 8 positions for opening spring clips or fastening them in a custom position • heavy duty, two-component handle • made in Europe (Slovenia) NEW PRODUCT! EXCELLENT VALUE! Hand tools UNIOR 622629 • contains deep sockets, 1/4” drive, 6 point in sizes 4, 5, 6, 7, 8, 9, 10, 12 and 13 mm on socket rail • sockets drop forged and hardened/ tempered across the entire length • for manual use only (non impact) • individual sockets available for replacements $ 48.00 NEW SET! 9 PIECE 1/4” DRIVE DEEP SOCKET SET 4 - 13 MM, SINGLE HEX, ON RAIL EXCELLENT VALUE! LIMITED STOCK! $ 111.00 NEW SET! Hand tools UNIOR 619793-619802 SP SET • swivelling sockets with uni-joint, short, 12 point • sizes included are 10 -19 mm (10 pieces) • supplied on socket rail • for use in difficult to reach spots • for use with hand tools (non impact) only • individual sockets available while stocks last 10 PIECE 3/8” DR SOCKET SET WITH UNI-JOINT, 12 POINTS, ON RAIL OUTSTANDING VALUE! LIMITED STOCK! $ 99.50 Hand tools UNIOR 618917 • factory calibrated to +/- 4 % • for tightening wheels on all cars that require tightening to 110 Nm (check manufacturer’s specs) • especially handy to keep in car for on-road wheel change • can be recalibrated (interval is 12 months or 5000 cycles, whatever comes first) • 400 mm long, 1.3 kg in weight • must not be used for undoing bolts and only be used in direction shown on wrench • must not tighten bolts further when torque is reached to avoid damage to handle • further torque sizes for cars and trucks available on request PRE-SET, CALIBRATED TORQUE HANDLE 110 NM FOR CARS HANDY! Hand tools 3/4” DRIVE REVERSIBLE RATCHET, 500 MM LONG UNIOR 602737 • 24 teeth • body drop forged, entirely hardened and tempered • excellent price: quality ratio • spare part kit for ratchet available NEW PRODUCT! EXCELLENT VALUE! $2 96.00 UNIOR has been producing hand tools in Slovenia/Europe for 100 years. Through partial ownership of the steel plant supplying the steel for its products, its own drop forging plant and constant investments in its production and quality control, UNIOR ensures that its products are amongst the best in Europe, with an excellent price : quality ratio. UNIOR is ISO 9001 and 14001 certified. GREAT VALUE! BEST SELLER!
Transcript
All prices include GST in Australia, exclude GST in NZ, and are valid till 30 September 19 (after that only as long as stocks last and without any bonus item)
SPECIALS I / 2019E U R O P E A N Q U A L I T Y T O O L S
Hand tools UNIOR 623200• containssidecutters(160mm),combinationpliers(180mm)andlongnosepliers(160mm)
All prices include GST in Australia, exclude GST in NZ, and are valid till 30 September 19 (after that only as long as stocks last and without any bonus item)
HAZET 810/6• setwithmostcommonsizesflat
and Phillips screwdrivers• tiptypeandsizemarkedon
handle for easy identification• mattchrome-platedblade,burnishedtips,
softgrip handle with hanging hole• includes4flatscrewdrivers(0.5x3x80,0.8x4x100,1x5.5x125,1.2x6.5x150mm)and2Phillips(PH1x80,PH2x100mm)
storage and transportation• entirelydropforged,hardened
and tempered body• workingsurfacesinductionhardened• softgriphandles• madeinEurope(Slovenia)• alsoavailablein300mmlengthoutsidepromotion
NEW PRODUCT! GREAT VALUE! $69.50Hand tools
INSULATED MULTIGRIPS VDE, 240 MMUNIOR 619199
• doublelayeredinsulatedhandles,eachlayer has different colour for additional safety-appearanceofsecondlayer/colour is additional warning sign that pliers need to be replaced
switch at back of housing• compositemotorhousing• twinhammermechanism• variablespeedtrigger• freespeed5500rpms• airconsumption198l/min, recommendedairpressure6.2bar
• noiselevel903dB(A)• sparepartsavailable
NEW PRODUCT! GREAT VALUE! $799.00BESTSELLER! POWERFUL!
• perfect fit for the front high pressure fuel line nut on the fuel pump on Detroit diesel engines DD13, DD15, OM471, OM472 and OM473
19 MM, 119 MM LONG
$167.50
MUST HAVE!
1/2” DRIVE INJECTION LINE WRENCH,
All prices include GST in Australia, exclude GST in NZ, and are valid till 30 September 19 (after that only as long as stocks last and without any bonus item)
1/2” DRIVE WHEEL BEARING HOUSING SPREADING TOOL
• forexpandingthespringstrutandballjointmounting(separatingthe spring strut from the wheel bearing housing)
unsuitable extraction tools such as pliers• with14mmhexdrive• length32mm• foruseone.g.CITROEN(C4,C5,Spacetourer,Jumpy,DS4,DS5with2.0BlueHDIenginesince09.13),FORD(Mondeo,S-Max,Kuga,Galaxy,Focus,C-Maxwith2.0TDCienginesince09.14),PEUGEOT(308,508,3008,5008,Expert,Travellerwith2.0BlueHDIenginesince11.13),TOYOTA(ProaceVerso,Bus,BoxPlatformwith2.0Denginesince02.16),OPEL/VAUXHALL(GrandlandX2.0Dsince10.17)
on front and trailing axles of commercial vehicles• availablewithboxend12pointorfemaleTorxopening(seebelow)• useofthewrenchrendersdisassemblyof
the steering tie lever unnecessary• canalsobeusedwitha3/4”drivetorquewrenchinsertedinto3/4”drivesquareopeningonwrenchandtightening in line with manufacturer’s specs
All prices include GST in Australia, exclude GST in NZ, and are valid till 30 September 19 (after that only as long as stocks last and without any bonus item)
height with extra flat ratchet and socket (included)
standard socket length
extra-long socket length
All prices include GST in Australia, exclude GST in NZ, and are valid till 30 September 19 (after that only as long as stocks last and without any bonus item)
MAINTENANCE FREE!
GREAT PRODUCT!
PROFESSIONAL, BATTERY-LESS JUMP STARTER FOR 12V ENGINESLEM C3-12V
• servicelifeof10years,1millioncycles• superfastcharging from running engine on another
vehicle or standalone battery within 10-120seconds• oftenremainingpowerinotherwiseflatbatteryissufficienttorechargejumpstarterwhichthen canjumpstartthesamevehicle
• alsosuppliedwithfullyautomatic smart charger for chargingfrom220Vpowersocket(takeslonger)
All prices include GST in Australia, exclude GST in NZ, and are valid till 30 September 19 (after that only as long as stocks last and without any bonus item)
control from raw material to finished product• lifetimewarranty,excludingwear
and tear and improper usage• allpunchesinsetandfurthersizes
also available individually
6 PIECE PARALLEL PIN PUNCH SETPB 750.BL
$93.50GREAT SET!
$149.00GREAT SET!
•T-handlehexkeywithsoftgriphandle‘SwissGrip®’•with hanging hole in handle• includessizes4,5,6,8and10mm•blades150mmlong,exceptsize10mm=200mm
long, additional blade on side of handle•allbladeslaser-engravedwithsizeandserialnumberforqualitycontrol•madeinSwitzerland•also available with a ball end (outside promotion)
5 PIECE T-HANDLE HEX KEY SET, 4-10 MM, LONG, STRAIGHT-END
PB 1207.4-10 SP SET • rechargeablethroughUSBconnection• fittedwithnewCOBLEDstriplightprovidinga
powerful and completely uniform illumination which is ideal for a worklight
• separatetoolkitforsmallsizesisclipped into larger roll pouch
• coversthemostusedsizesinslotted(7x), Phillips(4x),Pozi(3x),Hex(7x)andTorx(8x), alsoincludedawlandvoltagetesterand2handles, one for small and one for large blades
All prices include GST in Australia, exclude GST in NZ, and are valid till 30 September 19 (after that only as long as stocks last and without any bonus item)
TWIST DRILL SET, HSS COBALT 5, IN 0.5 MM INCREMENTS
• 5%CobaltalloyedandgroundHSSdrills, with increased heat resistance comparedtonormalHSSdrills
materials and applications• setcontainstypeC90º (DIN335)countersinksin sizes6.3,8.3,10.4,12.4,16.5and20.5mm
• suppliedinlightweightplasticcase
RUKO 102790RO
GREAT QUALITY! $175.00
standard countersink
UltimateCutcountersink
WATCH VIDEO
NEW PRODUCT!
MADE IN GERMANY! MADE IN GERMANY!
3 PIECE TUNGSTEN-CARBIDE ROTARY BURR SET IN MINI BOX
• fordeburring,breakingofedges,trimming, processing welding seams, surface processing, etc.
• high-performancetungsten-carbide rotary burrs with cross-toothing(highercutting capacity than simple toothing)forhigh-alloysteels,stainlesssteel,heat-resistantsteels, die cast and plastics
• setcontains3rotaryburrswith10mmdia., supplied in practical plastic case with foam
All prices include GST in Australia, exclude GST in NZ, and are valid till 30 September 19 (after that only as long as stocks last and without any bonus item)
AVAILABLEFROM:
ThisbrochureispublishedbyOzSwissEuropeanTools,ABN69492017797,Tel.0298079322,Fax0298079344,Webwww.europeantools.com. au. All prices in this brochure are suggested promotional prices that include GST when sold in Australia and exclude GST when sold in NZ. Prices are valid till 30 September 19, after that only while stocks last and without any bonus item. There is no obligation for resellers to adhere to these prices.
7 PIECE 2 ARM PULLER SET WITH STANDARD AND EXTRA THIN HOOKS, FOR UP TO 4 PULLER COMBINATIONS - UP TO 90 MM IN WIDTH AND 200 MM IN DEPTHKUKKO K-20-1+S-T
LIMITED STOCK!!GREAT SET!
• screwplugsareinsertedintotaphole and then extracted with sharp blows with the slide hammer
• threadedpinsinscrewplugscanbeunscrewedandreplacedseparately-alsoallows usage of adapters without pins with other tools with same outside thread
-6screwplugs(M3,M4,M5,M6,M8,M10)withreplaceable pins for use with slide hammer -3zinc-platedadaptersM7/M12,M10/M12,15-16G/M12foruseofslidehammerwithinternalextractorsKukko21series(notincluded) and other tools with respective outside thread-slidehammer430g,270mmlongwithM12connection-suppliedinplasticcasewithfoam
• madeinGermany• allitemsavailableindividually
for replacements $383.50
10 PIECE SLIDE HAMMER SET FOR EXTRACTING BUSHINGS AND THREADED ITEMSKUKKO KS-22-01
GREAT SET!
• for manual cleaning and deburring of bores, tubes, etc.
•brushes with loop•overall length 300 mm, section
with bristles 100 mm• includesdia4,6,8,10and12mm•supplied in clear plastic pouch•brushes made in Germany•allbrushesandfurthersizesalsoavailable
individually, also available in other materials
5 PIECE CYLINDER BRUSH SET WITH BRASS BRISTLES
$69.00
LES 542.701-704/740 SP
3 PIECE BRAKE CALLIPER BRUSH SET - STEEL, STAINLESS STEEL AND BRASS
$48.00
•designed for use in automotive industry for mainly cleaning brake pads but can also be used for other cleaning tasks
•slim brush with heavy straight wire filling• two component ergonomical handle•2x13rows,steel0.35mm,stainlesssteel0.35mm,brass0.25mmwire
