18
| Date post: | 21-Jun-2015 |
| Category: |
Technology |
| Upload: | centric-learning |
| View: | 536 times |
| Download: | 0 times |
Introducing
The Ultimate in Accuracy, Reliability & Value
DenMat’s NEW SplashMax VPS Impression Material
The next generation of the award winning Splash! is everything that defines a premium VPS Impression Material featuring maximum
detail, maximum tear strength, and maximum contrast at a value oriented price.
SplashMax Key Highlights
• Instant hydrophilicity• Maximum tear strength & elasticity • Excellent dimensional accuracy• Thixotropic consistency & ideal flow properties• 2 set times (2:15 & 4:30)• 4 high contrast viscosities
– Xlite, Lite, Medium, Heavy
• 2 delivery options – Cartridge & Jumbo Pack
• Wild berry scent
Instant Hydrophilicity
Water droplets on SplashMax material dropped to 0° within 30
seconds whereas the lowest contact angle achieved by
leading competitors in this same time frame was 18°.
By definition, a contact angle of 0° is considered
superhydrophilic which none of the other leading brands
achieved.
SplashMax Achieves the Lowest Contact Angle Within Seconds
Maximum Tear Strength
SplashMax Heavy
SplashMax Lite
Aquasil Ultra Heavy
Aquasil Ultra XLV
Imprint 3 Quick Step Lite
Imprint 3 Quick Step
Heavy
0
0.1
0.2
0.3
0.4
0.5
0.6
0.7
Tear Strength
Material
New
ton/
mm
A high tear strength maintains the
impression’s integrity and keeps the impression
from tearing or distorting during removal from the
mouth or separation from the model.
Featuring a Snap Set Cure Rate
As seen above, the viscosity during working time is hardly increasing. The setting process begins when
accelerated by the thermo-active formulation - Indicated by the sharper increase of the viscosity in
the purple shaded part of the curing profile.
Ensures precise impression:
1. During working time the material needs to remain flowable – no premature setting should occur in this period.
2. Secondly, as soon as the tray is place in final position, the setting process should be as fast as possible
Rapid Working & Set TimesAccommodate All Types of Quadrant and Full Mouth Preparations
Product Working Time
Intraoral Set Time
Total Set Time
SplashMax Regular Set Time 50ml Cartridge
2:15 2:15 4:30
SplashMax Half Time 50ml Cartridge
1:00 1:15 2:15
SplashMax Regular Set Time 360ml Jumbo Cartridge
2:15 2:15 4:30
SplashMax Viscosities & High Contrast ColorsViscosity Color
Extra Lite Body Orange
Lite Body Green
Medium Body Blue
Heavy Body Purple
SplashMax comes in four viscosities and two set times. Luminous colors result in sharp contrast
when used together.
Features & Benefits Features Benefits
Instant hydrophilicity/ wettability
Low contact angle achieved within seconds, when it really matters. Results in consistent highly detailed impressions in a moist environment
Maximum tear strength & elasticity
Keeps impression from tearing or distorting during removal from mouth or separation from model
Excellent dimensional accuracy
99% recovery after stretching and compression forces – prevents permanent deformation/distortion of the impression after removal from the mouth
High contrast colors Results in sharp contrast when used together
Thixotropic consistency & ideal flow properties Material is self contouring and flows into the finest details
Wild berry scent Reduces gag reflex, alleviates patient discomfort
SplashMax Product OfferingsDescription Contents
Available Set Times
SplashMax 2PK Cartridges – Extra Lite, Lite, Medium, Heavy Body
2 - 50mL Cartridges, Tips, Instructions 2:15; 4:30
SplashMax Bulk Pack Cartridges – Extra Lite & Lite Body
8 – 50mL Cartridges, Instructions 2:15; 4:30
SplashMax Bulk Pack Cartridges – Medium & Heavy Body
20 – 50mL Cartridges, Instructions 2:15; 4:30
SplashMax Jumbo Cartridge Refill Kit – Medium & Heavy Body
2 – 360mL Jumbo Cartridges, Tips, Rotating Rings, Instructions
4:30
SplashMax is the Ultimate in Accuracy, Reliability and Value!
Genie
Splash
Max
Extrude
FlexiT
ime
Imprin
t 3
Take 1 Adva
nced
Aquasil U
ltra
$31.99 $40.00
$50.99 $53.99 $58.50 $58.99 $59.00
Competitor Pricing $/2PK 50mL Cartridge*
*List prices according to Henry Schein
Technical Specifications
SplashMax Extra Lite Body• Color: Orange• Recovery from Deformation: ........99.8%• Strain-in-Compression: ..................5.0%• Shore A Hardness:..............................43• Linear Dimensional Change: ..........0.2%
SplashMax Lite Body• Color: Green• Recovery from Deformation: ........99.8%• Strain-in-Compression: ..................6.2%• Shore A Hardness: .............................41• Linear Dimensional Change: ..........0.2%
SplashMax Medium Body• Color: Blue • Recovery from Deformation:.....99.8%• Strain-in-Compression: ..........3.2%• Shore A Hardness: ..................60• Linear Dimensional Change: ......0.2%
SplashMax Heavy Body• Color: Purple • Recovery from Deformation:......99.7%• Strain-in-Compression: ..............3.0%• Shore A Hardness:......................62• Linear Dimensional Change: ........0.2%
SplashMax Impression TechniqueStep 1: Extrude the base material (Heavy or Medium) into the impression tray Step 2: Once the material is in the tray, apply the wash material (Extra Lite or Lite) on top of the heavy material in the tray, if desired. Step 3: When impression tray is loaded with heavy/medium body material & wash (if desired), then apply wash around the prepped teeth in the patient's mouth. Step 4: Immediately insert the filled tray to capture the impression.
SplashMax in the News!
What Your Peers Are Saying About SplashMax!
“I didn’t experience any problems with the material even in slight moisture. SplashMax was predictable, provided very good visual contrast, better handling and scent than the current material I am using in my office.”
- Take 1 & Aquasil User
“The material was easy to extrude, had great flowability of the Lite Body, and the detail was excellent. We will be switching to SplashMax soon.”
- FlexiTime User
“It performed as promised – crisp, clear details with absolutely no tears. It’s the best VPS I have ever seen.”
- Splash! User
Thank you very much for your time! We look forward to hearing your feedback.
Please do not hesitate to contact us should you have any questions!
Hilary Brown, Product Manager
Phone: 805-922-8491 ext. 3108 Email: [email protected]
Danielle Hyman, Associate Product Manager
Phone: 805-346-3700 Ext. 3425
Email: [email protected]
