YUTAMPO II
> THE QUICKEST AND MOST ECONOMIC
THERMODYNAMIC HOT WATER PRODUCTION
SOLUTION ON THE MARKET
SPLIT THERMODYNAMIC WATER HEATER
DOMESTIC HOT WATER SUPPLY
NEW BUILDS
RENOVATIONS
yuta
mpo ii
resid
entia
l heatin
g
WHY CHOOSE A HITACHI
THERMODYNAMIC WATER HEATER?
GREATER COMFORT
GREATER ECO-EFFICIENCY
> Guaranteed operation at temperatures down to -15°C (outdoor temperature).
> A very short heating time with accurate temperature selection.
> A silent outdoor unit which operates at only 63 dB(A).
> The indoor unit does not produce any noise.
ENERGY EFFICIENCY: ACHIEVE GREATER SAVINGS WHEN THE PRICE OF ELECTRICITY INCREASESAccording to Ofgem’s State of the Energy Market 2017 report “whilst bills have dropped since their peak in 2013, they are still higher in real terms than they were 10 years ago.
However, there is a solution.
The energy efficiency of Hitachi heating and cooling solutions, where your electricity consumption can be divided by a minimum of 3. How? Thanks to the YUTAMPO II certified COP, performance can be as high as 3.2.
Remember: with a COP of 3.2, 1kW of electricity will produce 3.2kW of hot water!
In winter as in summer, the heat drawn from the
outside air is stored in the domestic hot water (DHW)
storage tank.
What you need to know! The electricity consumption of your YUTAMPO II will be even lower if the coefficient of performance (COP) is high. YUTAMPO II has one of the best COPs on the market utilising 1kW of electricity and converting it into 3.2 kW of domestic hot water (DHW). (under standard rating conditions).
> This solution will save you moneyThis YUTAMPO II was designed by Hitachi to use 70% ‘free’ energy (heat removed from the air) and 30% electricity, whilst a conventional water heater typically requires more energy to operate than it produces.
> How does the heater work?A thermodynamic water heater (The YUTAMPO II) works like a conventional heat pump. The outdoor unit of the YUTAMPO II solution removes heat from the air outside and transfers the heat to the water stored in the hot water tank.
> Powerful technologyThe technology in the YUTAMPO II has been proven to work. The YUTAMPO II is the most efficient solution for your home, thanks to the reduced heating time, accurate temperature control and the silent and compact design.
> Why use an outdoor unit?The outdoor unit guarantees comfort without the noise. Once installed outside, the unit removes the heat from the air outside without cooling the house.
> An eco-responsible commitmentThe YUTAMPO II thermo- dynamic system produces more energy than it consumes, unlike conventional water heaters.
(1) 190 litre model(2) Compared to a conventional fossil fuel boiler.
DOMESTIC HOT WATER SUPPLY
HEATALL
YOUR WATER(1)
3hrs15TO
MORE ENVIRON-MENTALLY FRIENDLY
THERMODYNAMIC TANK SYSTEMS ARE OFFICIALLY RECOGNISED UNDER THE EUROPEAN COMMISSION’S RENEWABLE ENERGY DIRECTIVE WHICH PROMOTES THE USE OF RENEWABLE ENERGY.
> The YUTAMPO II uses the heat found in the air: with up to 100% renewable energy available.
> Like all HITACHI units, the solution does not emit any CO2 directly. (Only the electricity used during operation of the unit produces CO2).
> It divides the average CO2 emissions by 5.(2)
> If the tank is installed in a heated room then the energy loss through the tank casing is limited.
> There are two tank volumes available (190 and 270 litres), ensuring you have the optimum size for maximum savings.
80 dB(A)
74 dB(A)
63 dB(A)YUTAMPO II
SOUNDLEVELS
44 dB(A)
0 dB(A)YUTAMPO II
(Noise in decibels depending on model)
ROAD TRAFFIC
WASHING MACHINE
OUTDOOR UNIT
INDOOR UNIT
RUSTLING LEAVES
WITH HITACHI, YOUR TRUSTED
EXPERTS
+60YEARSEXPERIENCEIN AIR CONDITIONING
AND HEATING
+4.5MILLIONHEATING SYSTEMS
MANUFACTURED EACH YEAR AROUND THE WORLD
MANUFACTURER'S WARRANTIES
WARRANTY ON OTHER PARTS
COMPRESSOR WARRANTY
GUARANTEE ON THE STAINLESS STEEL TANK
See page 8
SIMPLIFIED CONTROLBY HITACHI
You can adjust settings using the new intuitive interface common to all your HITACHI devices:> hourly schedule> desired temperature of the hot water
supply
WATER HEATING RATE
> Thanks to the heating power, the YUTAMPO II is one of the fastest water heaters on the market, requiring only 3hr15m to heat the water in the entire tank to an ultra-precise temperature, even during winter at temperatures as low as -15°C.
HEAT STORAGE AND WATER PURITY
> The storage tank is made of high quality stainless steel. Thanks to the reinforced insulation within the tank, the heat is maintained throughout the stored water eliminating any risk that impurities will form in the water thanks to the anti-bacterial function.
ENERGY EFFICIENCY WITH INVERTER TECHNOLOGY
> The compressor developed and manufactured by Hitachi incorporates Inverter technology. This enables the YUTAMPO II to precisely adapt the operating power to the needs of the occupants in the house. Inverter technology reduces power consumption by 30% compared to a traditional compressor technology which reduces your electricity bill.
REMOTE CONTROL
> You have the option to move your control unit into your living room for even even greater convenience.
YUTAMPO II, FOCUSED ON
ECO-EFFICIENT TECHNOLOGY
Simple, economical and aesthetic, the YUTAMPO II thermodynamic water
heater is the most effective solution providing comfort for the whole family.
A HIGH COP
3.21kWWHERE
= 3.2kW DHW
CONSUMPTION
Depending on the model
YRS YRS
YRS YRS
YRS YRS
1 Outdoor unit
2 2 x DHW tank sizes are available in stainless steel (190 litres or 270 litres)
3 Programmable wired and portable controller
INTER- CONNECTED
SOLUTION
HI-KUMO Stay connected to your HITACHI YUTAMPO II> remote control of your
YUTAMPO II via your Smartphone, Tablet, PC etc.
> all features are easily accessible;
> temperature management for your home, domestic hot water supply and swimming pool;
> weekly schedule;
> holiday function;
> assistant function: program your heating configuration in advance by answering only 3 questions;
> smart tip FUNCTION: in one click, lower your set temperatures and achieve energy savings of up to 7%.
CONTROL UNIT
WIRED PROGRAMMABLE CONTROLLER Multiple featuresIn addition to the essential functions, you will also have access to:
> a weekly schedule that allows you to configure up to 5 different time slots each day;
> a "holiday" function: ensures the ideal water temperature is ready for your return thanks to programmable temperatures which you can set before you go away on holiday;
> your monthly consumption is recorded and displayed.
CONTROL YOUR COMFORT
23
1
CUSTOM-MADE INSTALLATION FOR NEW BUILDS AND RENOVATIONSSIMPLE TO INSTALLYour YUTAMPO II will be installed where your previous hot water tank was located and can be connected directly to your home's heating and water network.
COMPACT AND SILENTOnly 60 cm wide, the thermodynamic tank is as compact as a standard kitchen cabinet.
The indoor tank does not emit any noise and the outdoor air conditioning unit is as quiet as other leading outdoor units.
UNDERSTATED DESIGNWith a new streamlined design, the YUTAMPO II tanks (available in 190 or 270 litres variants) can be installed wherever you want.
COMFORTABLE ALL-YEAR ROUNDThe YUTAMPO II produces hot water throughout the year, regardless of the temperature outside. You can obtain water at the perfect temperature whether it is winter or summer.
Your HITACHI installer:
YOUR INSTALLER, AN EXPERT, A PROFESSIONALYour installer will be able to select products suited to your needs, carry out a state-of-the-art installation and provide after-sales care through an on-going maintenance contract.
The commercial guarantees provided by Hitachi relate solely to the parts within our units. They shall apply only to parts which have been installed in accordance with our technical specifications and continue where the unit(s) are subjected to regular maintenance by qualified personnel. The frequency of maintenance required is dependent upon the conditions of use and the legislation in force. For more information please contact your installer.
INDOOR UNIT - UNIT TAW-190NHB TAW-270NHB
Nominal tank volume - L 190 270
Drawdown cycle - - L XL
Baseline temperature ℮wh ºC 53.5 53.8
COP COPECS - 3.1 3.2
Electrical auxiliary heater - kW 1.5 1.5
Volume of returned or available water Vmax L 256 365
Heating timeTime h:min 3:15 4:50
Power kWh 4.77 5.55
Setpoint range - ºC 30~75 30~75
DHW temperature with booster - ºC 75 75
Refrigerant connection lengths - m 20 20
Dimensions (width/height/depth) - mm 520 x 1620 x 594 600 x 1620 x 674
Weight - kg 49 54
YUTAMPO IIAIR
CONDITIONING UNIT
DOMESTIC HOT WATER SUPPLY
(1): Value obtained with an air temperature of 7ºC and a cold water temperature of 10ºC in accordance with the specification stated in LCIE Nº 103-15/B: 2011 based on standard NF EN 16147:2011, with refrigerant piping connection lengths of 7 m with no difference in height.
OUTDOOR UNIT UNIT RAW-35NHB
Noise level (sound output) dB(A)(1) 63
Dimensions (width/height/depth) mm 841 x 548 x 335
Weight kg 33
Refrigerant fluid - R410A
NEW BUILDS
RENOVATIONS
Specifications in this catalogue are subject to change to allow Hitachi Air Conditioning Solutions to continue to bring the latest innovations to its customers.
Johnson Controls - Hitachi Air Conditioning Europe SAS (UK) Whitebrook Park, Lower Cookham Road, Maidenhead, Berkshire SL6 8YA, United Kingdomemail: [email protected]
Johnson Controls - Hitachi Air Conditioning Europe SAS. (Ireland)Unit 9, Bluebell Business Park, Old Naas Road, Dublin 12, Irelandemail: [email protected]
tel: 020 3901 0912www.hitachi-hvac.com
JC-H GB 0011_17
