SPM Manufacturer

7/29/2019 SPM Manufacturer

1/18

Precocity Automation SystemG-35A, Kunwar Singh Nagar Nangloi Delhi- 110046, INDIA

Tel. +91-9555817489; +91-991064637; Email:[email protected]

REGD, OFFICE:- WORK OFFICE:-PRECOCITY AUTOMATION SYSTEM PRECOCITY AUTOMATION SYSTEMBOOTH NO. 187, GRAIN MARKET, PAI ROAD G-35A, KUNWAR SINGH NAGAR

recocity Automation

SystemP

Within a short span of time, we have sharpened our skills in the relevant

domain. Leveraging on our extensive knowledge & experience in the

field of Industrial Automation, we have come up with cost effective

solutions. Further, our technical competence, superior products &dedication to ongoing improvement in offering solutions using their rich

domain experience & networking with globally latest technological

product suppliers makes us competent than our competitors.

Incorporated in 2011, Precocity Automation System is an India based

engineering solution company formed with a vision to provide

innovative engineering automation solution to a wide array of industries.

We specializes in the field of Customized Test & Measurement

automation & special purpose machines for a wide range of applications.

We are a group of experts from different hard core fields like

mechanical, pneumatics, Hydraulics, electrical, Instrumentation andElectronic Based Special Product as per Specification
mailto:[email protected]:[email protected]:[email protected]:[email protected]


2/18

Precocity Automation SystemG-35A, Kunwar Singh Nagar Nangloi Delhi- 110046, INDIA

Tel. +91-9555817489; +91-991064637; Email:[email protected]

REGD, OFFICE:- WORK OFFICE:-PRECOCITY AUTOMATION SYSTEM PRECOCITY AUTOMATION SYSTEMBOOTH NO. 187, GRAIN MARKET, PAI ROAD G-35A, KUNWAR SINGH NAGAR

Our services

With the comprehensive experience of a DIN ISO 9001 certified plant

engineering company

we will take care of all phases and aspects of your projects - from the

beginning to final acceptance.

Planning and layout of test benches and facilities

Project-drafting and project management

System integration

Mechanical design and manufacture

Electrical engineering

Measuring equipment and instrumentation

Automation equipment

Assembly and commissioning

Service and Annual Maintenance Contract

Our customers*Car manufacturers

*HVAC & Compressor Unit

*Commercial vehicle manufacturers

*Engine manufacturers and repair shops

*Component manufacturers*Development service providers

*Testing centers

*Universities/teaching institutions

*Research institutes

*Machine manufacturers
mailto:[email protected]:[email protected]:[email protected]:[email protected]


3/18

Area of use Research and development Production Quality assurance Maintenance

Models PAS containerized design Conventional design integrated in the building Custom solutions

PRECOCITY AUTOMATION SYSTEMS

AND YOU WILL PASS YOUR TEST!

Our product and service portfolio

Applications Special Purpose Test Bench Customized test & measurement Data acquisition system Data logger system Control Panel

Industries Automotive Environmental and power generation Railway engineering Marine engineering Military engineering Tool construction and mechanical engineering

YOUR TESTING PROBLEM IS OUR CHALLENGETEST BENCHES TAILOR

Our test benches

We will design a test bench ideally suited to your

test requirements

ready for use, modular and

efficient.

Customized

Whether we are dealing with a complete car HVAC, an

Car compressor or assembly - your requirements

are what counts.

InnovativeHVAC or Compressor, hybrid drives or future

drive systems - PAS test benches deliver the

results you require.

Specialized

From severe cold to tropical heat -

PAS testing systems will enable you to simulate

extreme environmental conditions.


4/18

Cost-efficient

From the initial concept to hand-over of the

turnkey facility, PAS will provide consistent

project management - all from a single source.

Environmentally compatible

Optimum soundproofing reduces noise level,

innovative treatment of noise lowers the

emission of pollutants we strongly believe in

assuming responsibility for our environment.

EXPERIENCE AND EXPERTISE FOR EFFICIENT TESTING SOLUTIONS

Time-saving

Automated testing procedures, automatic docking

of supply lines, speedy setup - time saving

concepts ensure efficient procedures.

Comprehensive

Ventilation, energy supply or cooling and

refrigeration equipment - needless to say that

PAS will also take care of the planning

and implementation of your building technology.

Efficient

Innovative concepts and the use of leading-edge

technology enables PAS test benches

to be operated with minimum impact on natural

resources - tailored to your requirements and

economically efficient.

Alternative

A modular containerized construction available

as an alternative to traditional in-building

designs provides a highly flexible and

economical solution - both as a free-standing

solution or integrated into an existing building.


5/18

Compatible

Whenever you are faced with the need to upgrade

existing test benches or replace individual

components - open interfaces enable the smooth

integration of new equipment.

Worry-free

With a comprehensive maintenance and service

offering, PAS will remain your reliable

partner throughout your systems service life.

Special-purpose test systems

PAS also designs customized testingsolutions for individual applications.

The applications below show only some of the

numerous options available.

Your testing problem is our challenge!

Single-cylinder test benches

Complete testing systems including dynamometer,

anti-vibration mounting and all necessary media/

supply circuits/services (fuel, oil, water, exhaust

lines, air, etc.) for use in research and development.

Test benches for electrical railway

traction drives and wheel sets

Customized test benches for static and dynamic

testing.


6/18

Stroke/pressure measuring system

for turbochargers

Customized solutions designed for measuring and

recording a variety of measurement variables,

depending on requirements.

Standard products

Based on long-standing experience gained in

numerous projects involving a wide range of

testing requirements, we have been able to

develop and offer a broad portfolio of standard

solutions. A summary is shown below.

Testing equipment

Fuel consumption measuring and conditioning

Systems * Special Digital Power Supply

**Volume flow measuring systems

Control systems

Test bench automation systems

Loading units

Eddy current dynamometers

Hydraulic dynamometers

System assemblies

Test bench frames

Throttle actuator

Shaft guards


7/18

Annual Maintenance Contract

We keeps your machine Working

Your manufacturing plant has become highly dependent on machine & machine is dependent on

controller proper working and you dread the thought of your machine creating a problem at the wrong

moment, when you need it the most

Why dont you get an annual maintenance contract with us and relax?

We will:

Attend your problem at short span of time Do PM of beneath AMC Contract Machine within a sample period of time Repair & replace the damaged part of machine during PM

Experience and expertise in the drive testing sector Turn-key test benches for engines, drive units,

assemblies, and non-standard applications

Customized solutions - conventional design orPAS containerized solutions available

Mechanical components and measuringequiment for test benches

Planning of test benches and test floors


8/18

COMPRESSOR ENDURANCE TEST BENCH

Compressor Endurance Test Bench has been developed for endurance testing of automobile AC

Compressors.

Main Features of the Test Bench are:

PC Based system with NI DAQ cards, Lab VIEW software for monitoring & controlling processparameters such as suction pressure / temperature, discharge pressure/ temperature, expansion

valve pressure/ temperature, chamber temperature , clutch RPM etc. Insulated compressor room chamber with temperature control up to 120 C. Running & Loading of compressor by VFD driven motor, Condenser & Evaporator

heat exchangers.

Data logging of controlled parameters for Quality analysis.


9/18

PULSATION TESTING MACHINE

Pulsation Testing Machine is designed for pressure pulsation testing of Heat Exchangers, Discharge &

Suction Hoses, Condensers, Evaporator, Tube Liquids; Tank Receiver etc. used in auto AC conditioning

system.


PC based system with Lab VIEW software & NI data acquisition cards for measuring processparameters.

Safety chamber with temperature control up to 135C and oil temperature control to simulate realtest conditions for components under test.

Pressure pulsation testing up to four components at a time of max. 1500 ml capacity. Hydraulic power pack for generating test pressure up to 14 - 100 bar, pressure pulsation control

using accumulators.

Pressure from pulsation testing acquired, displayed and controlled under set time and pressurelimits for different models.

Components are put under test for settable number of cycles normally ranging up to 1, 00,000 &above.

Data logging of Parameter for analysis


10/18

BURST PRESSURE TEST BENCH

Burst Pressure test bench is designed for testing hoses, evaporators, heat exchangers etc. used in auto air

conditioning systems.

The Burst Test is used to determine the components weakest point. It is performed by internally

pressurizing the component until it bursts for Dynamic/ Static burst thus determining its "Burst Strength

Resistance".


PC based system with LabVIEW software & NI data acquisition cards for controlling andmonitoring of pressure and flow in the component under test along with controlled rise in

temperature of hydraulic oil.

Interactive user interface is provided on a touch screen panel for operator to set test parametersand interact with the system during the test.

The Hydraulic power pack consisting of oil chamber, flow and pressure control valves,directional valves, intensifier , pressure transmitter for generating test pressure

Maximum Hydraulic test pressure ranging from: 20 to 400 Kgf/cm2. Pressure ramping (linear) control (5150 Kgf/cm2/ minute) with the help of a proportional flow

& pressure control valve. Safety chamber for component testing with vertical sliding door. Pressure of component under test is increased & holding of pressure for settable time and

pressure untill component gets bursted.

Burst Pressure capturing and displaying. Interactive user interface for setting/editing test parameters. Report generation after each Test OK and NG Output after completion of test.


11/18

POWER WINDOW TEST BENCH

Power Window test bench is designed and developed for endurance / fatigue testing of motors used in

power windows.


PC Based system with NI DAQ cards and Lab VIEW software for data acquisition and interactiveuser interface.

Motor to be Tested are employed on power windows with all 4 doors and motor performance ismonitored for set number of cycles, thus simulating real test conditions.

Current being drawn by motors monitored as per set limits. Speed of power windows are also monitored. Data logging being done for motor performance analysis


12/18

HV STATOR TEST BENCH

HV Stator Test Bench is an on-line testing machine developed to test stator coils used to engage clutches

in automobile AC compressors.

Main Features of the machine are:

Fully PC based system, with NI Data acquisition cards & LabVIEW software. Conducts 3 standard tests to check the quality of coil. Continuity & coil resistance test , checks the current drawn by coil with set limits. Insulation resistance test @ 600V AC - 1000V AC to check insulation quality of coil. High voltage layer short test @ 1500 V DC to check for any internal layers short or

turns present in coil, by comparing aquired ringing waveform developed from coil

under test with the master coil.

'OK' & 'NG' output after performing all tests and auto stamping on coil. Data logging for every coil tested during each shift for analysis point of view.


13/18

BLOWER TEST BENCH

Blower Test Bench is used for on-line quality testing of automobile AC Blowers.

Main Features of the machine are:

Checks the presence of one, two or three resistances (as per models). Checks continuity of relays present in the blower. Checks the current drawn by the blower Checks the current drawn by the blower motor at various speeds for settable time blower. Printing option available after completion of the test. PLC & Touch panel HMI for control, monitoring and editing / setting of different model test

parameters. OK and NG Output after completion of test.


14/18

CLUTCH SLIP TORQUE TEST BENCH

Machine is designed & programmed for clutch slip torque checking for fully assembled compressors as

well as clutch assemblies of various models.


Capable of applying torque up to 150 NM at programmable rates. A Heated Chamber with temperature control (up to 1500C) for mounting of compressors / clutch

assemblies under test.

A multi groove pulley driven by a pneumatic cylinder, rack & pinion arrangement. Rate of torque control by proportional valve for drive cylinder. A belt tensioning roller actuated by a pneumatic cylinder. PLC with touch panel HMI for monitoring and setting test parameters.


15/18

POWDEDEFOAMING MACHINE

Defoaming machine is designed & programmed to perform the defoaming action on potted PCBs, to

remove any moisture present.

Main Features of the machine are listed below:

Vacuum chamber for attaining the different vacuum levels. Vacuum pump with resin trap for vacuumizing the chamber. Proportional and vacuum valve for controlling the desired vacuum rate as per setting. PLC & HMI Control for machine operation


16/18

POWDER COATING MACHINE

Powder Coating Machine has been designed & developed for powder coating of Armature, Stator, and

Rectifier Plates for electrical insulation.

Main Features of the machine are listed below:

Fluidized Powder Path Automatic holder fixture with/without masking of component area Fixture dunking & rotation Arrangement Excess powder blow arrangement. Suction lip around fludized bath for preventing powder escape in environment. Cyclone with screw / vibratory conveyor for recovery & recirculation of powder. Bag filter for preventing air pollution & powder wastage. PLC & Touch Panel HMI control for machine operation.

ADVANTAGES:-

Automated masking of areas not to be coated feasible. Even coating with thickness control. Avoids Powder wastage & Pollution.


17/18

ROTOR PULLEY STRENGTH TEST BENCH

Machine is designed & programmed for performing fatigue / endurance testing on pulley rotor, thus

determining rotor strength for various models.


It is capable of applying belt tension up to 500 Kgs & running the rotor up to 20000 rpm atprogrammable rates.

Insulated & sound proof heated chamber with temperature control (up to 1500C) for mounting ofpulley rotors under test.

Motorized screw jack for belt tensioning adjustment. PLC with touch panel HMI for monitoring and setting test parameters.


18/18

Thank You

CONTACT US

Precocity Automation System

Contact Person: SUSHIL KUMAR

G-35A, Kunwar Singh Nagar

Nangloi Delhi 110041

Date post:	14-Apr-2018
Category:	Documents
Upload:	enggcontrolsautomation
View:	216 times
Download:	0 times

SPM Manufacturer

Documents