PMS 504PMS 877

The Hershey Company Logo - PMS Vector w/4-color photo

k - 100%

SponSoringUniverSitieSCollege of Engineering

Grado Department of Industrial and Systems Engineering

College of Engineering

Grado Department of Industrial and Systems Engineering

Grado Department of Industrial and Systems Engineering

Grado Department of Industrial and Systems Engineering

College of Engineering

CEUs and PDHs available

Since its inception, FedEx Ground has relied on engineering professionals to build the best small-package system serving North America. From industrial to software engineers, the hundreds of engineering professionals FedEx Ground employs have been the driving force behind its ongoing quest to research, develop and deploy new technologies and systems to support the company’s growing operations.

At FedEx Ground, industrial engineers have moved beyond traditional time studies and focus on bringing a unique modern perspective to solving problems and making improvements. FedEx Ground engineers have created the most advanced package sortation system in the small-package industry; engineered a highly efficient linehaul network to deliver industry leading service with the fastest transit times; and created numerous technology and information systems innovations that improve operating efficiencies, enhance the customer experience and enable new products and services to be realized.

If you have what it takes to deliver for FedEx Ground, please visit fedex.com/careers.

Engineers deliver for FedEx Ground

fedex.com

thank you to the 2013 iie Annual Conference Sponsors.Our generous sponsors make IIE Annual a success year after year. Your continued support and

relationship with IIE is an integral part of our association and the member experience. Thank you.

thank you to the 2013 iie Annual Conference Alliance partners.

PMS 504PMS 877

The Hershey Company Logo - PMS Vector w/4-color photo

k - 100%

SponSoringUniverSitieS

Sponsorships are available for three IIE conferences and can be customized for your organization. Contact Dolores Ridout at ridout3@airmail.net, Anita Lambert at anita4@airmail.net or

Hutson Lambert at hlambert@airmail.net to discuss sponsorship opportunities.

College of Engineering

Grado Department of Industrial and Systems Engineering

College of Engineering

Grado Department of Industrial and Systems Engineering

Grado Department of Industrial and Systems Engineering

Grado Department of Industrial and Systems Engineering

College of Engineering

IIIwww.iienet.org/annual |

Auburn University Clemson University

Lehigh University Missouri S&T University

Purdue UniversityRochester Institute of

TechnologySingapore University of Technology and Design Texas A&M UniversityPenn State University

North Carolina State University The Ohio State University Oklahoma State University

University of Arkansas University of Houston

University of Louisville LODI University of Miami

University of Washington

University of Michigan

Virginia Tech College of Engineering

University of Missouri

Wayne State College of Engineering

University of Oklahoma

Western Michigan University

Georgia Tech ISyE

Iowa State University

George Mason University

Northwestern University

Arizona State University

Kansas State University Lamar University

Oregon State University

University of Arizona

College of Engineering

Grado Department of Industrial and Systems Engineering

College of Engineering

Grado Department of Industrial and Systems Engineering

Grado Department of Industrial and Systems Engineering

Grado Department of Industrial and Systems Engineering

College of Engineering

University of Central Florida University of Florida

University of Texas at Arlington

McCormick

Industrial Engineering& Management Sciences

COLLEGE of ENGINEERING

DEPARTMENT OF

INTEGRATED SYSTEMS ENGINEERING

IV | Welcome to the IIE Annual Conference & Expo 2013

thank you to our Sponsoring Universities for the Saturday Evening Networking Reception, the Sunday and Monday Morning Coffee Service,

and the Monday Morning Refreshment Break. Your support is greatly appreciated.

Vwww.iienet.org/annual |

Conference overview

First-time Attendee orientation

New to the conference? Hear pointers and quick tips on navigating the IIE Annual Conference from the conference chair.

SUNDAY, MAY 197:15 - 7:45 a.m. | Auditorium

MONDAY, MAY 207:15 - 7:45 a.m. | Auditorium

Conference overviewWelcome and thank you for joining us for the largest industrial and systems engineering event of the year. We look forward to exploring how to apply core concepts and job skills to modern global issues — all in sunny San Juan, Puerto Rico.

Enhance your career with focused sessions, workshops, facility tours and exhibits featuring cutting-edge research, best practices and innovative applications and product solutions. Hear from noted keynote speakers as they discuss the future of the field and how industrial engineers are essential to the success of all industries. Visit the exhibit hall to network with your peers, view product demos and discuss product solutions with knowledgeable exhibitors.

The conference program comprises two types of sessions: Applied Solutions, showcasing proven solutions and applications from industry, and the Industrial & Systems Engineering Research Conference (ISERC) sessions, featuring research from industry scholars and academia. Mix and match sessions from each program to create the ideal experience for any professional.

All educational sessions will be held at theCaribe Hilton1 San Geronimo StreetSan Juan, PR 00901

• All educational sessions

• Three keynote presentations

• Welcome and networking receptions

• Refreshment breaks

• One CD of the conference proceedings

Your conference registration fee

includes:

RECORDING OF SESSIONS Audio/videotaping/photography of conference sessions is strictly forbidden without the written permission of the conference organizer and explicit permission granted by the speaker.

VI | Welcome to the IIE Annual Conference & Expo 2013

ierC SessionsLean Healthcare Systems ................................................................................................................................................................................. 1Operations Research Applications 1 ................................................................................................................................................................ 1Inventory Applications of Operations Research ............................................................................................................................................... 1Healthcare Transformation .............................................................................................................................................................................. 2Care Coordination and Communication .......................................................................................................................................................... 2Sustainability................................................................................................................................................................................................... 2Disaster Prevention in Homeland Security ....................................................................................................................................................... 3Complex Production Planning and Scheduling Issues ..................................................................................................................................... 3Work Systems: Measurement, Control, & Evaluation I .................................................................................................................................... 3Applications in Humanitarian and Social Welfare Supply Chains .................................................................................................................... 4Life Cycle Reliability Models and Optimization ............................................................................................................................................... 4Data Mining Techniques and Applications ...................................................................................................................................................... 4Complex Optimization .................................................................................................................................................................................... 5Manufacturing & Design in Puerto Rico ......................................................................................................................................................... 5Simulation Applications in Supply Chain ........................................................................................................................................................ 5QCRE Best Student Paper Competition ........................................................................................................................................................... 6Retail Systems ................................................................................................................................................................................................. 6Optimization in AC power flow modeling ....................................................................................................................................................... 6Using Technology to Improve Learning & Engagement ................................................................................................................................... 7Lean Applications in Healthcare ...................................................................................................................................................................... 7Lean Applications in Healthcare ...................................................................................................................................................................... 8Lean Student Paper Competition ..................................................................................................................................................................... 8Decision Making I ........................................................................................................................................................................................... 8Operations Research Applications 2 ................................................................................................................................................................ 8Care Coordination and Work Analysis ............................................................................................................................................................ 9Anticoagulation Care ....................................................................................................................................................................................... 9Education in Latin America ............................................................................................................................................................................. 9Methodologies for Improved Security Strategies .............................................................................................................................................10Production Planning and Scheduling 11 .........................................................................................................................................................10Work Systems: Design, Analysis, & Optimization ..........................................................................................................................................10Organizational Decision Making in Humanitarian Logistics...........................................................................................................................11Change Point Detection in Statistical Process Control ....................................................................................................................................11Design & Control of Distributed Information Systems ...................................................................................................................................11Big Data Analytics ......................................................................................................................................................................................... 12Biomedical Manufacturing - I ........................................................................................................................................................................ 12Simulation Applications in Healthcare I......................................................................................................................................................... 12Advanced Topics in Reliability Engineering and Service Logistics ................................................................................................................. 13Green Supply Chain ...................................................................................................................................................................................... 13Modeling Energy, Water, and Climate Change Policy .................................................................................................................................... 13Biomechanics .................................................................................................................................................................................................14Entrepreneurship Education ...........................................................................................................................................................................14Engineering Management in Healthcare - 1 ....................................................................................................................................................14CELDi - Facility Logistics .............................................................................................................................................................................. 15Lean Culture ................................................................................................................................................................................................. 15Transportation Applications of Operations Research 2 .................................................................................................................................. 15Healthcare Models .........................................................................................................................................................................................16Decision Making in Healthcare ......................................................................................................................................................................16Infrastructure Resilience Analysis 1 ...............................................................................................................................................................16Production Planning and Scheduling 10 .........................................................................................................................................................17Work Systems: Measurement, Control, & Evaluation II ..................................................................................................................................17Risk and Decision Making in Food Supply Chains .........................................................................................................................................17Condition Based Maintenance and Applications I ......................................................................................................................................... 18Medical Simulation and Information Interfaces ............................................................................................................................................. 18e-Business and e-Commerce .......................................................................................................................................................................... 18Design for Manufacturing - I ......................................................................................................................................................................... 19Multicriteria Simulation Optimization ........................................................................................................................................................... 19New Methods and Data Analysis in Statistical Process Control ..................................................................................................................... 19Inventory Optimization and Control - I ......................................................................................................................................................... 19Energy System Optimization and Decision Support-I .................................................................................................................................... 20Driver Distraction and Air Traffic Control...................................................................................................................................................... 20Educating IEs for Careers in Healthcare ........................................................................................................................................................ 20Team-based Work Systems ............................................................................................................................................................................ 21CELDi - Warehouse Design ........................................................................................................................................................................... 21Analysis of Emerging Technologies ................................................................................................................................................................ 21Transportation Applications of Operations Research 3 .................................................................................................................................. 22Disaster Response and Public Health ............................................................................................................................................................ 22Invited Session - Simulation Modeling and Analysis I .................................................................................................................................... 22Scheduling I .................................................................................................................................................................................................. 23

table of Contents

VIIwww.iienet.org/annual |

table of Contents

Advances in Scheduling and its Applications ................................................................................................................................................. 23Model Based Systems Engineering ................................................................................................................................................................. 23Energy System Reliability and Infrastructure Expansion .................................................................................................................................24Procurement and Distribution Models in Supply Chain Operations ...............................................................................................................24Big Data and Complex Network Analysis .......................................................................................................................................................24EFIE: Emerging Research Trends in Operations Research ............................................................................................................................. 25Micro/Nanoscale Manufacturing ................................................................................................................................................................... 25Simulation Methods and Applications in Manufacturing, Material Handling, and Logistics .......................................................................... 25Effective Fault Management and System Reliability Improvement .................................................................................................................. 25Inventory Optimization and Control - II ........................................................................................................................................................ 26Unit Commitment with Uncertainty ............................................................................................................................................................. 26Panel Discussion: Do’s and Don’ts for Your ABET Self-Study and Visit ...........................................................................................................27Enterprise System Design and Operations ......................................................................................................................................................27Facility Logistics V - Design ...........................................................................................................................................................................27Education in Engineering Economic Analysis .................................................................................................................................................27Manufacturing Scheduling and Analysis........................................................................................................................................................ 28Education Scheduling .................................................................................................................................................................................... 28Simulation Modeling and Analysis II ............................................................................................................................................................. 29Facilities and Location Planning .................................................................................................................................................................... 29Protection / Risk ............................................................................................................................................................................................ 29Sustainability Metrics and Policy Making ...................................................................................................................................................... 30Systems and Methodologies for Supply Chain Management ........................................................................................................................... 30Sociotechnical Systems .................................................................................................................................................................................. 30Transportation Service Systems ......................................................................................................................................................................31Procurement and Supplier Selection ...............................................................................................................................................................31Business Analytics Industry Applications .......................................................................................................................................................31EFIE: Emerging Research Trends in Homeland Security and Emergency Response ....................................................................................... 32Biomedical Manufacturing - II ....................................................................................................................................................................... 32Agent-Based Simulation & Cognitive Modeling ............................................................................................................................................. 32Statistical Process Control for Profile Data ..................................................................................................................................................... 32Warehousing and Distribution ...................................................................................................................................................................... 33Energy Systems Modeling .............................................................................................................................................................................. 33Human Performance and Workload............................................................................................................................................................... 34Modeling and Problem Solving Techniques ................................................................................................................................................... 34Featured Session: Introductory Lean Six Sigma Curriculum .......................................................................................................................... 34Engineering Management in Quality ............................................................................................................................................................. 352012 Wellington Award Lecture .................................................................................................................................................................... 35Optimization ................................................................................................................................................................................................. 35Emerging Healthcare Topics .......................................................................................................................................................................... 36Scheduling II ................................................................................................................................................................................................. 36Sensors, Signal Processing ............................................................................................................................................................................. 36Production Planning and Scheduling 5 .......................................................................................................................................................... 37Resource Allocation in Health Care ............................................................................................................................................................... 37Statistical Analysis in Advanced Manufacturing ............................................................................................................................................ 37ISE Research in Disaster Logistics ................................................................................................................................................................. 38Design for Manufacturing - II ........................................................................................................................................................................ 38Social Network & Manpower Management ................................................................................................................................................... 38Performance Measure and Maintenance Decision Making ............................................................................................................................. 38Topics on Performance and Reliability of Renewable Energy Technologies ..................................................................................................... 39Human Systems Analysis............................................................................................................................................................................... 39Undergraduate Curriculum Improvement ...................................................................................................................................................... 40Action Research Applications in Engineering Management ........................................................................................................................... 40Special Topics in Engineering Management - 1 .............................................................................................................................................. 40Transportation & Sustainability in Engineering Economy ..............................................................................................................................41Workforce Scheduling ....................................................................................................................................................................................41Operating Rooms ...........................................................................................................................................................................................41Data Mining Approaches and Techniques...................................................................................................................................................... 42Scheduling III ................................................................................................................................................................................................ 42Information Fusion........................................................................................................................................................................................ 42Border Security Optimization Models............................................................................................................................................................ 43Production Scheduling and Lot Sizing ........................................................................................................................................................... 43Work Systems Tutorials I ............................................................................................................................................................................... 43Chronic Disease Medical Decision Making .................................................................................................................................................... 44Condition Based Maintenance and Applications II ........................................................................................................................................ 44Intelligent Engineering Systems I ................................................................................................................................................................... 44Stochastic Programming ................................................................................................................................................................................ 45Materials Processing and Manufacturing ....................................................................................................................................................... 45Simulation Modeling and Analysis I .............................................................................................................................................................. 45Health Management and Integrated Production Planning .............................................................................................................................. 45

VIII | Welcome to the IIE Annual Conference & Expo 2013

table of Contents

Lean Best Practice Award .............................................................................................................................................................................. 46Smart Grid Modeling-I .................................................................................................................................................................................. 46Decision Making and Sound .......................................................................................................................................................................... 46IIE Transactions Best Papers - Q&RE and OE&A ..........................................................................................................................................47Assessment of ABET Objectives and Outcomes ..............................................................................................................................................47Facility Logistics VI - Congestion ...................................................................................................................................................................47Project Justification Methodologies ................................................................................................................................................................ 48Solution Methodologies for OR Problems....................................................................................................................................................... 48Sensor and Network Applications of Operations Research ............................................................................................................................. 48Location Models ............................................................................................................................................................................................ 49Strategic Management ................................................................................................................................................................................... 49Work Systems Tutorials II .............................................................................................................................................................................. 49Production and Distribution Systems Modeling and Analysis ........................................................................................................................ 50Poster Session M1 .......................................................................................................................................................................................... 50Decision Making in Distributed Electricity Networks with Renewables ......................................................................................................... 51Usability in Healthcare .................................................................................................................................................................................. 51Decision Making II ........................................................................................................................................................................................ 52Planning and Performance Management Systems .......................................................................................................................................... 52Performance Management Systems ................................................................................................................................................................ 52Project Management ...................................................................................................................................................................................... 52Infrastructure Resilience Analysis 2 .............................................................................................................................................................. 53Sustainability and Environment .................................................................................................................................................................... 53Production Planning and Scheduling: Recent Advances in Theory and Applications ..................................................................................... 54Aerospace Systems ........................................................................................................................................................................................ 54Cancer Care Service Systems ......................................................................................................................................................................... 54Intelligent Engineering Systems II ................................................................................................................................................................. 54Graduate Study in Industrial Engineering...................................................................................................................................................... 55Biomedical Manufacturing - III ...................................................................................................................................................................... 55Simulation Metamodeling and Optimization ................................................................................................................................................. 55Poster Session M2 ......................................................................................................................................................................................... 56IIE Transactions Best Papers - S&L and D&M ............................................................................................................................................... 57Operations Management ............................................................................................................................................................................... 57Facility Logistics III -Networks ...................................................................................................................................................................... 57Workforce Planning with Learning ................................................................................................................................................................ 58Occupational and Public Health .................................................................................................................................................................... 58Invited Session - Healthcare Decision Analysis .............................................................................................................................................. 58Simulation, Modeling & Analysis .................................................................................................................................................................. 59Green Technology ......................................................................................................................................................................................... 59Group Scheduling and Logistics .................................................................................................................................................................... 60Systems Theory ............................................................................................................................................................................................. 60Service Systems - Healthcare II ...................................................................................................................................................................... 60Supply Chain Resilience ................................................................................................................................................................................ 61EFIE: Emerging Research Trends in Healthcare ............................................................................................................................................. 61Biomedical Manufacturing - IV ...................................................................................................................................................................... 61Simulation Applications in Healthcare II ....................................................................................................................................................... 62Reliability Tests and Information Aggregation ............................................................................................................................................... 62Logistics Network Modeling .......................................................................................................................................................................... 62Energy System Optimization and Decision Support-II ................................................................................................................................... 63Neck and Obesity Biomechanics ................................................................................................................................................................... 63Active Learning ............................................................................................................................................................................................. 63Leadership and Change Management ............................................................................................................................................................ 64Facility Logistics VIII - Manufacturing and Recycling .................................................................................................................................... 64Lean Implementations ................................................................................................................................................................................... 64Proton Therapy .............................................................................................................................................................................................. 65Emergency Management ................................................................................................................................................................................ 65Learning Organizations ................................................................................................................................................................................. 65Supply Chain & Logistics .............................................................................................................................................................................. 66Sustainable Urban Areas and Green Building ................................................................................................................................................ 66Production Planning and Scheduling 1 .......................................................................................................................................................... 66Healthcare Engineering Management ............................................................................................................................................................ 67Service Systems - Health Care I ..................................................................................................................................................................... 67Managing Uncertainty in Humanitarian Supply Chain and Logistics Systems ............................................................................................... 67IT Enabled Design of Products and Systems .................................................................................................................................................. 68EFIE: Emerging Research Trends in Manufacturing ...................................................................................................................................... 68Additive Manufacturing Processes ................................................................................................................................................................. 68Agent-Based Simulation ................................................................................................................................................................................. 69Reliability and Maintenance for Dependent Failure Processes and Dependent Components .......................................................................... 69CELDi - Logistics and Distribution - I ........................................................................................................................................................... 69Clean Energy & Renewables-I ....................................................................................................................................................................... 70Human and Workplace Assessment .............................................................................................................................................................. 70

IXwww.iienet.org/annual |

table of Contents

Emerging Areas and Trends in IE Education .................................................................................................................................................. 71Systems of Systems Approach in Engineering Managment ............................................................................................................................. 71Management of Lean Implementation ........................................................................................................................................................... 71Lean Systems Design ..................................................................................................................................................................................... 72Applications of OR ........................................................................................................................................................................................ 72Sleep Apnea ................................................................................................................................................................................................... 72Pandemics and Epidemics ............................................................................................................................................................................. 73Engineering Management in Healthcare - 2 ................................................................................................................................................... 73Performance Metrics / Human Interaction ..................................................................................................................................................... 73Production Planning and Scheduling ..............................................................................................................................................................74Bayesian modeling of demand uncertainty .....................................................................................................................................................74Risk Assessment and Mitigation .....................................................................................................................................................................74Stochastic Models and Applications in Medical Decision Making .................................................................................................................. 75Green Supply Chain Management ................................................................................................................................................................. 75Approximate Dynamic Programming ............................................................................................................................................................ 75Biomedical Manufacturing - V ....................................................................................................................................................................... 76Simulation and Statistics ............................................................................................................................................................................... 76Design of Experiments and Robust Design .................................................................................................................................................... 76Logistics Network Optimization .................................................................................................................................................................... 77Ergonomics and Safety in Construction ......................................................................................................................................................... 77Assessing Learning ........................................................................................................................................................................................ 78SEMS Student Paper Competition ................................................................................................................................................................. 78Sustaining Organizational Transformations ................................................................................................................................................... 79Lean Six Sigma .............................................................................................................................................................................................. 79Multiobjective Optimization .......................................................................................................................................................................... 79Energy Applications of Operations Research ................................................................................................................................................. 80Emergency Department ................................................................................................................................................................................. 80Electronic Health Records ............................................................................................................................................................................. 80Network Interdiction 1 ...................................................................................................................................................................................81Green Transportation .....................................................................................................................................................................................81Applications in Decision Analysis ...................................................................................................................................................................81Airline Service Systems .................................................................................................................................................................................. 82Methods for Reliability and Warranty Analysis .............................................................................................................................................. 82Advanced Predictive Analytics for Healthcare and Wellness Assurance ......................................................................................................... 82Lean Manufacturing Systems - I .................................................................................................................................................................... 83Lean and Six Sigma Methodology .................................................................................................................................................................. 83Quality Management and Six Sigma .............................................................................................................................................................. 83Clean Energy & Renewables-II ...................................................................................................................................................................... 84Construction Productivity ............................................................................................................................................................................. 84Undergraduate Course Improvement ............................................................................................................................................................. 84Healthcare Systems Management .................................................................................................................................................................. 85Facility Logistics I - Layout ............................................................................................................................................................................ 85Lean Methods ............................................................................................................................................................................................... 85Stochastic Applications of Operations Research ............................................................................................................................................ 86Policy ............................................................................................................................................................................................................ 86Technology .................................................................................................................................................................................................... 86Production and Distribution Planning ........................................................................................................................................................... 87Control Charts and Process Monitoring ........................................................................................................................................................ 87CELDi - Logistics and Distribution - II .......................................................................................................................................................... 87Poster Session T1 ........................................................................................................................................................................................... 88Smart Grid Modeling-II ................................................................................................................................................................................. 88Energy and the Environment in Construction ............................................................................................................................................... 89Product Development and Portfolio Selection ................................................................................................................................................ 89Risk Management .......................................................................................................................................................................................... 90Network Interdiction 2 .................................................................................................................................................................................. 90Closed Loop Supply Chain I ...........................................................................................................................................................................91Engineering Management and Strategy ...........................................................................................................................................................91Operations Research: Decisions Making and Simulation ................................................................................................................................91Analytical Models and Metrics of Service Systems ......................................................................................................................................... 92Modeling Technology to Improve Operations in the Supply Chain ................................................................................................................ 92Titans of Simulation ...................................................................................................................................................................................... 93Simulation Modeling for Risk Management & Pricing ................................................................................................................................... 93Poster Session T2 .......................................................................................................................................................................................... 93Social Issues in Engineering Education ......................................................................................................................................................... 94Metaheuristics ............................................................................................................................................................................................... 94Patient Safety ................................................................................................................................................................................................. 95Inventory Control .......................................................................................................................................................................................... 95Screening and Early Prevention I ................................................................................................................................................................... 95Screening Models in Homeland Security ....................................................................................................................................................... 96Closed Loop Supply Chain II ........................................................................................................................................................................ 96

X | Welcome to the IIE Annual Conference & Expo 2013

table of Contents

Production Planning and Scheduling 12 ........................................................................................................................................................ 96Lean in Process Industries ............................................................................................................................................................................ 97Data Mining and Imbalanced Data ................................................................................................................................................................ 97Distribution Systems Planning ...................................................................................................................................................................... 97Semantic Information & Knowledge Extraction I .......................................................................................................................................... 98Organizational Modeling and Analysis .......................................................................................................................................................... 98Lean Manufacturing Systems -II .................................................................................................................................................................... 98Simulation Modeling and Analysis II ............................................................................................................................................................. 99Methods and Algorithms for Effective Quality Management .......................................................................................................................... 99Transportation............................................................................................................................................................................................. 100Wind Power Modeling-I .............................................................................................................................................................................. 100Upper Extremity Ergonomics ...................................................................................................................................................................... 100Undergraduate Student Enrichment - Research & Study Abroad ..................................................................................................................101Transportation & Logistics Management ......................................................................................................................................................101Facility Logistics IV - Applications ...............................................................................................................................................................101Business Investment Strategies .....................................................................................................................................................................102Improving Donor Organ Ultilization and Transplant Success .......................................................................................................................102Logistics and Supply Chain Management .....................................................................................................................................................102Screening and Early Prevention II .................................................................................................................................................................103Maritime Security .........................................................................................................................................................................................103Sustainable Services .................................................................................................................................................................................... 104Production Planning and Scheduling 13 ...................................................................................................................................................... 104Quality Control in Process Industries .......................................................................................................................................................... 104Service Systems I ..........................................................................................................................................................................................105Supply Chain Risk Management ...................................................................................................................................................................105Semantic Information & Knowledge Extraction II ....................................................................................................................................... 106Manufacturing Process Planning - I ............................................................................................................................................................. 106Manufacturing Process Planning - II ............................................................................................................................................................ 106Quality Control and Applications .................................................................................................................................................................107Wind Power Modeling-II ..............................................................................................................................................................................107Usability Potpourri .......................................................................................................................................................................................107IE Curriculum and Course Content ............................................................................................................................................................. 108Supply Chain and Logistics Management .................................................................................................................................................... 108Energy and Sustainability ............................................................................................................................................................................ 108Routing and Transport ................................................................................................................................................................................ 109Readmissions .............................................................................................................................................................................................. 109Sustainability and Higher Education ........................................................................................................................................................... 109Production Planning and Scheduling 15 .......................................................................................................................................................110Optimization and Modeling in Process Industries ........................................................................................................................................110Service Systems II .........................................................................................................................................................................................110Biofuels Supply Chain ..................................................................................................................................................................................112Semantic Information & Knowledge Extraction III .......................................................................................................................................112Manufacturing Process Planning - III ...........................................................................................................................................................112Manufacturing Process Planning - IV ...........................................................................................................................................................112Supply Chain Analysis and Design ...............................................................................................................................................................112K-12 Education .............................................................................................................................................................................................112Collaboration and Innovation .......................................................................................................................................................................113Engineering Management in Healthcare - 3 ................................................................................................................................................. 902

Systems Engineering Track – Monday...........................................................................................................................................................114Computer and Information Systems Track - Monday ....................................................................................................................................114Construction Track - Monday .......................................................................................................................................................................114Health Systems Track - Monday ....................................................................................................................................................................114IAB-Industry Advisory Board Track - Monday ..............................................................................................................................................114Process Industries Track - Monday ...............................................................................................................................................................114Simulation Track - Monday ...........................................................................................................................................................................114Sustainable Development Track - Monday ....................................................................................................................................................115Construction Track - Monday .......................................................................................................................................................................115Health Systems Track - Monday ....................................................................................................................................................................115Simulation Track - Monday ...........................................................................................................................................................................115Sustainable Development Track - Monday ....................................................................................................................................................115Construction Track - Monday .......................................................................................................................................................................155Health Systems Track - Monday ....................................................................................................................................................................115IAB-Industry Advisory Board Track - Monday ..............................................................................................................................................116Construction Track - Monday .......................................................................................................................................................................116Computer and Information Systems Track - Monday ....................................................................................................................................116Process Industries Track - Monday ...............................................................................................................................................................116

Applied Solutions Sessions

XIwww.iienet.org/annual |

Simulation Track - Monday ...........................................................................................................................................................................116Process Industries Track - Monday ...............................................................................................................................................................116Sustainable Development Track - Monday ....................................................................................................................................................116Computer and Information Systems Track - Monday ....................................................................................................................................117Construction Track - Monday .......................................................................................................................................................................117Engineering Management Track - Monday ....................................................................................................................................................117Health Systems Track - Monday ....................................................................................................................................................................117IAB-Industry Advisory Board Track - Monday ..............................................................................................................................................117Process Industries Track - Monday ...............................................................................................................................................................117Special Panel - Monday .................................................................................................................................................................................117Sustainable Development Track - Monday ....................................................................................................................................................118Construction Track - Monday .......................................................................................................................................................................118Health Systems Track - Monday ....................................................................................................................................................................118Sustainable Development Track - Monday ....................................................................................................................................................118Construction Track - Monday .......................................................................................................................................................................118Engineering Management Track - Monday ....................................................................................................................................................118Health Systems Track - Monday ....................................................................................................................................................................118Process Industries Track - Monday ...............................................................................................................................................................119Sustainable Development Track - Monday ....................................................................................................................................................119Work Systems Track - Monday ......................................................................................................................................................................119Health Systems Track - Monday ....................................................................................................................................................................119Lean Track - Monday ....................................................................................................................................................................................119Sustainable Development Track - Monday ....................................................................................................................................................119Work Systems Track - Monday ..................................................................................................................................................................... 120IAB-Industry Advisory Board Track - Monday ............................................................................................................................................. 120Latin American Track - Monday .................................................................................................................................................................. 120Lean Track - Monday ................................................................................................................................................................................... 120Process Industries Track - Monday .............................................................................................................................................................. 120Sustainable Development Track - Monday ................................................................................................................................................... 120Work Systems Track - Monday ..................................................................................................................................................................... 120IAB-Industry Advisory Board Track - Monday ............................................................................................................................................. 121Latin American Track - Monday .................................................................................................................................................................. 121Work Systems Track - Monday ..................................................................................................................................................................... 121Engineering Management Track - Tuesday ................................................................................................................................................... 121Latin American Track - Tuesday .................................................................................................................................................................. 121Lean Track - Tuesday ................................................................................................................................................................................... 121Process Industries Track - Tuesday .............................................................................................................................................................. 121Sustainable Development Track - Tuesday ................................................................................................................................................... 122Systems Engineering Track - Tuesday .......................................................................................................................................................... 122Work Systems Track - Tuesday ..................................................................................................................................................................... 122Engineering Management Track - Tuesday ................................................................................................................................................... 122Latin American Track - Tuesday .................................................................................................................................................................. 122Systems Engineering Track - Tuesday .......................................................................................................................................................... 122Latin American Track - Tuesday .................................................................................................................................................................. 122Supply Chain & Service Engineering Town Hall - Tuesday .......................................................................................................................... 123Work Systems Track - Tuesday ..................................................................................................................................................................... 123Latin American Track - Tuesday .................................................................................................................................................................. 123Work Systems Track - Tuesday ..................................................................................................................................................................... 123Engineering Management Track - Tuesday ................................................................................................................................................... 123Lean Track - Tuesday ................................................................................................................................................................................... 123Process Industries Track - Tuesday .............................................................................................................................................................. 123Systems Engineering Track - Tuesday ...........................................................................................................................................................124Engineering Management Track - Tuesday ....................................................................................................................................................124Systems Engineering Track - Tuesday ...........................................................................................................................................................124Engineering Management Track - Tuesday ....................................................................................................................................................124Latin American Track - Tuesday ...................................................................................................................................................................124Lean Track - Tuesday ....................................................................................................................................................................................124Process Industries Track - Tuesday ...............................................................................................................................................................124Quality, Reliability & Six Sigma Track - Tuesday ......................................................................................................................................... 125Special Panel - Tuesday ................................................................................................................................................................................ 125Systems Engineering Track - Tuesday .......................................................................................................................................................... 125Work Systems Track - Tuesday ..................................................................................................................................................................... 125Engineering Management Track - Tuesday ................................................................................................................................................... 125Latin American Track - Tuesday .................................................................................................................................................................. 125Lean Track - Tuesday ................................................................................................................................................................................... 125Operations Research Track - Tuesday .......................................................................................................................................................... 126Quality, Reliability & Six Sigma Track - Tuesday ......................................................................................................................................... 126Aerospace and Defense Track - Tuesday....................................................................................................................................................... 126

table of Contents

XII | Welcome to the IIE Annual Conference & Expo 2013

Engineering Management Track - Tuesday ................................................................................................................................................... 126Latin American Track - Tuesday .................................................................................................................................................................. 126Lean Track - Tuesday ................................................................................................................................................................................... 126Operations Research Track - Tuesday .......................................................................................................................................................... 126Quality, Reliability & Six Sigma Track - Tuesday ..........................................................................................................................................127Supply Chain & Service Engineering Track - Tuesday ..................................................................................................................................127Aerospace and Defense Track - Tuesday........................................................................................................................................................127Engineering Management Track - Tuesday ....................................................................................................................................................127Latin American Track - Tuesday ...................................................................................................................................................................127Quality, Reliability & Six Sigma Track - Tuesday ..........................................................................................................................................127Aerospace and Defense Track - Tuesday........................................................................................................................................................127Engineering Management Track - Tuesday ................................................................................................................................................... 128IAB - Industry Advisory Board Track - Tuesday ........................................................................................................................................... 128Latin American Track - Tuesday .................................................................................................................................................................. 128Lean Track - Tuesday ................................................................................................................................................................................... 128Operations Research Track - Tuesday .......................................................................................................................................................... 128Quality, Reliability & Six Sigma Track - Tuesday ......................................................................................................................................... 128Aerospace and Defense Track - Tuesday....................................................................................................................................................... 128Engineering Management Track - Tuesday ................................................................................................................................................... 129Latin American Track - Tuesday .................................................................................................................................................................. 129Operations Research Track - Tuesday .......................................................................................................................................................... 129Quality, Reliability & Six Sigma Track - Tuesday ......................................................................................................................................... 129Aerospace and Defense Track - Wednesday ................................................................................................................................................. 129Engineering Management Track - Wednesday ............................................................................................................................................. 129Health Systems Track - Wednesday ............................................................................................................................................................. 129Latin American Track - Wednesday ............................................................................................................................................................. 130Supply Chain & Service Engineering Track - Wednesday ............................................................................................................................ 130Aerospace and Defense Track - Wednesday ................................................................................................................................................. 130Health Systems Track - Wednesday ............................................................................................................................................................. 130Latin American Track - Wednesday ............................................................................................................................................................. 130Quality, Reliability & Six Sigma Track - Wednesday .................................................................................................................................... 130Supply Chain & Service Engineering Track - Wednesday ............................................................................................................................ 130Aerospace and Defense Track - Wednesday ..................................................................................................................................................131Health Systems Track - Wednesday ..............................................................................................................................................................131Latin American Track - Wednesday ..............................................................................................................................................................131Quality, Reliability & Six Sigma Track - Wednesday .....................................................................................................................................131Supply Chain & Service Engineering Track - Wednesday .............................................................................................................................131Aerospace and Defense Track - Wednesday ..................................................................................................................................................131Engineering Management Track - Wednesday ..............................................................................................................................................131Health Systems Track - Wednesday ............................................................................................................................................................. 132Latin American Track - Wednesday ............................................................................................................................................................. 132Supply Chain & Service Engineering Track - Wednesday ............................................................................................................................ 132Aerospace and Defense Track - Wednesday ................................................................................................................................................. 132Engineering Management Track - Wednesday ............................................................................................................................................. 132Health Systems Track - Wednesday ............................................................................................................................................................. 132Latin American Track - Wednesday ............................................................................................................................................................. 132Lean Track - Wednesday ............................................................................................................................................................................. 133Quality, Reliability & Six Sigma Track - Wednesday .................................................................................................................................... 133Supply Chain & Service Engineering Track - Wednesday ............................................................................................................................ 133Engineering Management Track - Wednesday ............................................................................................................................................. 133Health Systems Track - Wednesday ............................................................................................................................................................. 133Latin American Track - Wednesday ............................................................................................................................................................. 133Quality, Reliability & Six Sigma Track - Wednesday .................................................................................................................................... 133

table of Contents

Applied Solutions Sessions

XIIIwww.iienet.org/annual |

Incrementar la Disponibilidad de Producto en Anaquel en una Cadena Comercial ..........................................................................................................122What Are These Things Called Product Wheels - and Why Should I Care? ......................................................................................................................121Work Measurement Approach with Multifaceted Practical Usage in Process Improvement ..............................................................................................123Improving Requirements Engineering Through the Application of MBSE ........................................................................................................................ 124Macro-Simulation of Traffic Management Options for a Major Sporting Event.................................................................................................................. 115Real Time Factory Machine Intelligence ........................................................................................................................................................................... 116What Leaders Look For In Promoting IE’s Into Management - An IE Career Discussion .................................................................................................. 114Visual Measurement System Analysis with EMP ............................................................................................................................................................. 127Creating Additional Capacity By Applying Queueing Theory To Transportation Services ................................................................................................133Using Employees to Engage in Energy Reduction in their Workplace ............................................................................................................................... 118Using Six Sigma to Reduce Energy with Limited Data ...................................................................................................................................................... 119Using 3D Computer Simulation to Improve Construction Project Planning ..................................................................................................................... 116‘Coaching/Advising Panel Discussion’ (sponsored by IIE’s Industry Advisory Board jointly with IIE’s Young Professionals Group) ............................... 117Development of an On-line Advanced Ergonomics Training Course for Designers and Engineers ....................................................................................129A Guide to Food Waste Management: Lesson from Belgian Food Processing Industry ....................................................................................................120Supply Chain Fitness: Integration of Operations, Manufacturing and Supply Chain ........................................................................................................130Occupant’s Behavior and Programmable Thermostat ....................................................................................................................................................... 117“Randomness Kills” - or at Least Cripples ........................................................................................................................................................................ 114Engaging the World Confederation of Productivity Science and UN Global Compact ......................................................................................................125U.S. In-flight Icing Accidents and Incidents, 2006 to 2010 ..............................................................................................................................................132Simulación aplicada a servicios municipales: caso del ayuntamiento de Puebla. ..............................................................................................................129What You Need to Know About Empathic Design ........................................................................................................................................................... 124Mejoras de los Procesos Productivos en una Linea de Fabricacion de Productos Solidos de una Empresa Farmaceutica ..................................................130Bound for Flight: Achieving Organizational Excellence Leveraging Lean Management .................................................................................................... 115Lean Product Development Process Yields Huge Gains for Effective Leaders ...................................................................................................................128Optimization of Bevel Gear Operations using Simulation ................................................................................................................................................ 114Integrating Innovation Engineering Methods into Design for Six Sigma (DFSS). ..............................................................................................................125Applying Project Management Principles and IE techniques in Planning a Regional Conference .....................................................................................123Effective Labor Estimation in Process Industries ..............................................................................................................................................................123Industrial Engineering: An Integral Element of Systems Engineering Body of Knowledge ................................................................................................125Industry Advisory Board (IAB) Townhall .........................................................................................................................................................................128Capacity Management Using Static Modeling, Queuing Theory, and Performance Curves ...............................................................................................129Implementing Ergonomics Solutions through Lean workshops ........................................................................................................................................120IE Informatics/Business Intelligence: Faster Actionable Insight through an Information Experience ..............................................................................122RSE y los Encadenamientos Productivos Industriales Alrededor de una Mina ..................................................................................................................122Stakeholders in Systems Problems .................................................................................................................................................................................... 124Challenges and Benefits in Simulating Retail; A Non-Standardized Systems Approach ....................................................................................................133Measuring Productivity in a Wire Factory Using Random Work Sampling ....................................................................................................................... 119Applying Theory of Constraints to Large Network Problems ............................................................................................................................................ 127Design of Engineering Education as a Manufacturing System ..........................................................................................................................................121Making Strategic Plan for Quality – An Example .............................................................................................................................................................. 127Sustainable Development Town Hall Meeting ..................................................................................................................................................................120Smart Maintenance Decision Support Systems (SMDSS) ..................................................................................................................................................121Rational Engineering Lifecycle Manager – Improved Insight from Distributed Engineering Data ..................................................................................... 114An Application of Routing Models for PET Pickup for Recycling ......................................................................................................................................133Application of Enterprise Excellence (EE) Concept in Developing Growth Strategy Proposals in Aerospace Industry ...................................................... 124Optimization Opportunities to Improve Supply Chain Efficiency: A Practitioner’s Experiences ...................................................................................... 127Developing a Material Flow Organization - The Why and How ........................................................................................................................................128Lean Construction Model Using Industrial Engineering Tools .........................................................................................................................................120The Integrated Production, Inventory, and Routing Problem Considering Transportation Outsourcing ...........................................................................126Sequential Measure of Standard Work Compliance Coupled with Real-Time Performance Metrics .................................................................................. 127Layout Analysis to Select Transportation Equipment Storage Locations at a Cancer Hospital ..........................................................................................130Quality Improvement in Pharmacy Inventory Control ......................................................................................................................................................125Sustainable Transportation Packaging: What it Looks Like, and How it Benefits Your Company ....................................................................................122Applications of the Lean Methodology at The University of Texas MD Anderson Cancer Center .....................................................................................133A Usability Analysis of Critical Care, Med-surg and Birthing Hospital Beds ..................................................................................................................... 131Optimizing Cancer Care through Collaborative Approach ...............................................................................................................................................132Improve Surgical Flow through a Hybrid Collaborative Model ......................................................................................................................................... 118Cost Saving Breakthrough: Combined 6-Sigma & MOST Production Standards Setting ..................................................................................................121 Manufacturing Execution System (MES): An Examination of Implementation Strategy ................................................................................................. 114Reduction of Greenhouse Gas Emissions in the Oil and Gas Industry ............................................................................................................................. 116Optimizing Organizational Performance through a Closed Loop Hoshin Kanri System ................................................................................................... 124Deployment of a Successful Closed Loop Productivity Improvement System ...................................................................................................................133Evaluation of Alternative Robotics and Potential Applications..........................................................................................................................................129The Successful Road Map for Engineering and Management Systems Students: For Students, By Students and Experts .................................................. 127Measure to Fit PC Workplace by Personal Reference Points .............................................................................................................................................120Streamline Material Transfer Agreement Workflow Using LEAN Methodology ................................................................................................................120Engineering Government: a Look at Sustainable Politics .................................................................................................................................................. 115Combined Productivity Management and Ergonomics Based on MTM Process Description ............................................................................................ 119Advanced Scheduling Methods in First Unit Airplane Modification .................................................................................................................................126Supply Chain Sustainability: Carbon Footprint Calculation Approaches, Tools and Applications .................................................................................... 118Increasing Assembly Line Capacity Applying a Standard Work Methodology ..................................................................................................................121

table of Contents

XIV | Welcome to the IIE Annual Conference & Expo 2013

Revenue Capture using Six Sigma Methodology ...............................................................................................................................................................133Reducing CT Rescans using Six-Sigma Methodology .......................................................................................................................................................133Driving Efficiency through Lean in Scheduling Advanced Radiology Exams .................................................................................................................... 114Evaluation of Production Orders Split in Electrostatic Painting Company ........................................................................................................................132Optimization of Physical Distribution of Plant Using Cells Work .....................................................................................................................................121Scheduling Platform Vehicles Fruver in Stores Exito in Receipt Sites ................................................................................................................................ 131Leadership Traits That Result in Successful or Mediocre to Poor Transformation – Panel Discussion ...............................................................................126An Incipient Flower Cluster in Central Mexico ................................................................................................................................................................. 118Process Modeling in the Housing Allowance Using Discrete Simulation ..........................................................................................................................130Desarrollo Sostenible para Vivir Bien ................................................................................................................................................................................126Standardizing Patient Care to Improve Outcomes in Spinal Fusion Surgery ..................................................................................................................... 119Achieving Sustainable Improvement in Long-standing Dysfunctional Healthcare Peri-operative Processes ..................................................................... 118Utilizing Industrial Engineering Skills within Lean for the Right Overtime Reduction Implementation ........................................................................... 131Reducing Raw Material Waste in a Food Company by Using Six Sigma ...........................................................................................................................129Creating a Lean and Green Business System – Techniques for Improving Profits and Sustainability ................................................................................ 119Standard Work in a Variable Production Environment .....................................................................................................................................................128Identification of Congestive Heart Failure Patients through Lean Tools............................................................................................................................132Successful Applications of Work Sampling in Knowledge Work Environments ................................................................................................................123Caso de éxito con programas de consultoría para desarrollo de microempresarios del estado de Nuevo León, México. Sinergia entre gobierno y universidad ...................................................................................................................................................................................................................... 124Perspectiva del Centro de Investigación en Química Aplicada, (CIQA) caso de éxito en vinculación e investigación aplicando herramientas de la ingeniería industrial. ........................................................................................................................................................................................................125Utilización de la herramienta para planeación estratégica: Balanced Scorecard (BSC)en el Instituto Potosino de Investigación Científica y Tecnológica, IPICYT. San Luis Potosí, México ..................................................................................................................................................................123Study of Flow in Lean Product Development ....................................................................................................................................................................125Process Engineering: Key to Successful Problem Solving ................................................................................................................................................. 124The Potential and Obstacles of Integrated Project Delivery - Student Best Paper Award for Construction Division .......................................................... 118Construction Division Town Hall Meeting ....................................................................................................................................................................... 118Lean Construction is a Growth Area - Where Does That Leave You? ................................................................................................................................ 115Next Generation Rail Supply Chain Process Development: A Challenging Honor ............................................................................................................ 131The Next Generation Rail Supply Chain Initiative – What Is It? ...................................................................................................................................... 131Spreading Access to Health Care Quality Improvement Lean Tools ................................................................................................................................. 119Increasing capacity in the OR for thyroidectomy patients .................................................................................................................................................129Towards the Development of a Tool Evaluation Survey and Replacement Strategy ............................................................................................................ 131Utilizing Peer Networking for Performance Improvement ................................................................................................................................................129Comparing Operating Room Inventory Management Methods ........................................................................................................................................ 117Step Up Your Fixes – How to Optimize Your Improvement Investments ..........................................................................................................................122Vital Signs – How Healthy are Your Work Systems? ..........................................................................................................................................................126Reducing Supply Chain Costs By Maximizing Truck Space Utilization ............................................................................................................................132A Strategy for Managing Risks - A Project Management Tool ............................................................................................................................................130Using the Analytic Hierarchy Process to Enhance Performance Measurement in Engineering Education ........................................................................126A New Paradigm in the Implementation of a Lean Six Sigma Program ............................................................................................................................. 131Effective Financial Measures for Lean / Six Sigma Implementations: Getting Alignment with the Traditional Cost Accounting System ........................... 117Success Stories of Lean Transformations in the Medical Device Industry .........................................................................................................................123An Innovative Approach in Developing a Shop Floor Schedule for a Complex Manufacturing System .............................................................................. 116Use of Lean Sigma Methodology for Quality System Improvements - A Panel Discussion ................................................................................................128Creating a Lean and Green Business System ...................................................................................................................................................................122Accelerating Business Improvement - The Power of Effective Interactions ........................................................................................................................126Logistics & Supply Chain Division Town Hall Meeting ....................................................................................................................................................123Modern PRT Systems evolve from a Boeing-built Prototype based on IE Analysis ............................................................................................................ 115Boeing 777 Functional Testing Process Improvements to support 2.5 rate Increase .........................................................................................................132Value Streams – The Importance of Understanding Them ................................................................................................................................................130Informal Leadership ......................................................................................................................................................................................................... 116Modeling Complex Labor Calculations with a Limited Variable System – A Linear Optimization Case Study ..................................................................130Caso de estudio – optimización en proceso de procuración de justicia ............................................................................................................................ 127Work Systems and Work Measurement Town Hall Meeting .............................................................................................................................................122Accelerating Performance ................................................................................................................................................................................................. 117Leading as an Individual Contributor ...............................................................................................................................................................................120Logistics Management in the Hanseatica Company Using System Dynamics ...................................................................................................................128CIS Town Hall .................................................................................................................................................................................................................. 117Health Systems Town Hall .............................................................................................................................................................................................. 115Effects of RFID on Profitability in Retail Supply Chains ...................................................................................................................................................128Leadership: The Essential Linchpin between Strategy and Execution..............................................................................................................................121Reducción del Nivel de Inventario en las Familias de Conjuntos y Flechas Semi-Eje ........................................................................................................132Too Many Deaths - The Need for Great Construction Work Systems ................................................................................................................................ 114Use of Holistic Quality Management Approach to Mitigate Construction Risks ............................................................................................................... 155IIE PID 2013 Town Hall Meeting .................................................................................................................................................................................... 116Society for Engineering Management Systems Town Hall Meeting ................................................................................................................................... 117Managing Risk and Uncertainty in Global Markets ..........................................................................................................................................................125How Do We Measure Success in Creating Sustainability? A Panel Discussion .................................................................................................................. 116

table of Contents

SAtuRDAy, MAy 18 Event Room

8 a.m. - 5 p.m. Doctoral Colloquium Flamingo AB

8 a.m. - 5 p.m. New Faculty Colloquium Flamingo CD

3 - 6:30 p.m. Conference Registration Desk Open San Geronimo Ballroom Foyer

6 - 7:30 p.m. Networking Reception The Beach

SuNDAy, MAy 19 Event Room

7 a.m. - 6:30 p.m. Conference Registration Desk Open San Geronimo Ballroom Foyer

7:15 - 7:45 a.m. First-Time Attendee Orientation Auditorium

8 a.m. - Noon Undergraduate Student Technical Paper Competition, Sponsored by John Deere

Auditorium

8 a.m. - Noon Pre-conference Workshop - “Using Hoshin Kanri to Accelerate Lean and Six Sigma”

San Cristobal B

8 a.m. - 5 p.m. Pre-conference Workshop - “Sustaining a Lean Transformation through People, Process and Leadership Focus”

San Cristobal C

8 a.m. - 6:15 p.m. Doctoral Colloquium Poster Session San Cristobal A

8 a.m. - 6:15 p.m. ISERC concurrent sessions Various rooms - See Matrix for specific rooms

8:45 a.m. - 2 p.m. Fellows Meeting Las Olas

9:30 - 10:45 a.m. Keynote Presentation - S. David Wu, dean and Lee A. Iacocca Endowed Chair, P.C. Rossin College of Engineering and Applied Science, Lehigh University

San Geronimo Ballroom

11 a.m. - 4 p.m. Exhibitor Set-up San Cristobal Foyer

1 - 4 p.m. Innovations in Curriculum Competition Finals Auditorium

1 - 5 p.m. ABET Accreditation Workshop San Cristobal F

1:30 - 4:30 p.m. Student Simulation Competition Presentations, Sponsored by Rockwell Automation

San Cristobal G

2 - 3:15 p.m. Special Panels Flamingo B

3:30 - 4:45 p.m. Special Panels Flamingo B

5 - 6:30 p.m. Student Networking Mixer, sponsored by The Hershey Company Las Olas

6:15 - 8 p.m. Welcome Reception in the Exhibit Hall San Cristobal Foyer

MONDAy, MAy 20 Event Room

7 a.m. - 6 p.m. Conference Registration Desk Open San Geronimo Ballroom Foyer

7:15 - 7:45 a.m. First-Time Attendee Orientation Auditorium

8 - 9 a.m. ISERC 2013 Track Chairs Meeting Las Olas Room

8 - 9 a.m. State of the Institute Address San Geronimo C

8 a.m. - 6:15 p.m. ISERC concurrent sessions Various rooms - See Matrix for specific rooms

8 a.m. - 6:15 p.m. Applied Solutions concurrent sessions Various rooms - See Matrix for specific rooms

8 a.m. - 6:15 p.m. ISERC Poster Session San Cristolbal A

8 a.m. - 6:15 p.m. Student Track Event Center A

XVwww.iienet.org/annual |

Conference Schedule overview

MONDAy, MAy 20 (CONtINuED) Event Room

9:30 - 10:45 a.m. Keynote Presentation - Guy Primus, chief operating officer, Overbrook Entertainment

San Geronimo Ballroom

10:45 - 11:45 a.m. Executive Roundtable – ticket required – additional fee applies San Geronimo C

11 a.m. - Noon NSF Student Travel Grant Awardees Meeting San Geronimo Ball Room

Noon - 5 p.m. CIEADH Meeting Las Olas

10:45 a.m. - 4 p.m. Exhibit Hall Open San Cristobal Foyer

11:30 a.m. - 1 p.m. Lunch available for sale in the Exhibit Hall San Cristobal Foyer

2 - 3:15 p.m. Special Panels San Geronimo Ballroom

2 - 3:15 p.m. Special Panels Flamingo B

3:15 p.m. Refreshment Break - Sponsored by Amazon Fulfillment San Cristobal Foyer

3:30 - 4:45 p.m. Special Panels Flamingo B

5 - 6 p.m. NSF Program Manager Office Hours Salon del Mar B

7:30 - 9:30 p.m. Honors and Awards Dinner – ticket required – additional fee applies

San Geronimo Ballroom

9:30 - 10:30 p.m. Honors and Awards Dessert Reception – ticket required – additional fee applies

San Geronimo Ballroom Foyer

tuESDAy, MAy 21 Event Room

7 a.m. - 6:15 p.m. Conference Registration Desk Open San Geronimo Ballroom Foyer

8 a.m. - 6:15 p.m. ISERC concurrent sessions Various rooms - See Matrix for specific rooms

8 a.m. - 6:15 p.m. ISERC Poster Session San Cristobal A

8 a.m. - 6:15 p.m. Applied Solutions concurrent sessions Various rooms - See Matrix for specific rooms

8 a.m. - 6:15 p.m. Student Track Event Center A

9:30 - 10:45 a.m. Keynote Presentation - Felix Diaz, president, Latin American Region, Pall Corp.

San Geronimo Ballroom

10:45 a.m. - 4 p.m. Exhibit Hall Open San Cristobal Foyer

11:30 a.m. - 1 p.m. Lunch available for sale in the Exhibit Hall San Cristobal Foyer

2 - 3:15 p.m. Special Panels

3:15 p.m. Refreshment Break - Sponsored by Amazon Fulfillment San Cristobal Foyer

WEDNESDAy, MAy 22 Event Room

7 a.m. - 12:15 p.m. Conference Registration Desk Open San Geronimo Ballroom Foyer

8 a.m. - 12:05 p.m. Applied Solutions concurrent sessions Various rooms - See Matrix for specific rooms

XVI | Welcome to the IIE Annual Conference & Expo 2013

Conference Schedule overview

note: it is the policy of iie that no one under the age of 21 is served alcohol at an iie event. thank you for understanding.

XVIIwww.iienet.org/annual |

Conference Layout

Mai

n Bu

ildin

g

Las

Ola

sTe

rrac

eLa

s O

las

Ballr

oom

Salo

nD

e M

ar

Buss

ines

Cent

er

Exec

utiv

eBo

ard

Room

Conf

eren

ceRo

oms

Terr

aceCo

nfer

ece

Room

s

Salo

nFl

amin

goSa

lon

Trop

ical

Brid

ge

Boar

dRo

om 2

Boar

dRo

om 1

Flam

ingo

Foye

r

Car

ibe

Hilt

on

XVIII | Welcome to the IIE Annual Conference & Expo 2013

Choose sessions in both programs to create the best conference experience and learn the solutions, tools and methods you can take back to work. view the on-Site Schedule-At-A-glance for session schedule and room locations. Sessions are open to all registered conference attendees and no pre-registration is required.

Applied Solutions Sessions Hear industry-tested and proven solutions during 35- or 70-minute presentations. Applied Solutions sessions focus on applying industrial and systems engineering principles within industrial, healthcare or service companies.

industrial and Systems engineering research Sessions (iSerC)Hear scholarly work and the latest research from academia or industry during 15- to 25-minute presentations.

Double-Blind review process The ISERC Program Committee introduced the double-blind review process in 2010. Now in its fourth year, the method is used to keep the identity of author(s) and reviewer(s) of a paper anonymous, creating a fair, unbiased review. All identifying author information is removed from the paper. Similarly, reviewer comments are made so as not to include any information that might reveal the identity of the reviewer. By removing identifying information, bias that might otherwise be introduced from a reviewer recognizing a name or affiliation is removed, which helps to ensure the integrity, objectivity, fairness and professionalism of the review process.

Conference events

Book Signing eventSunday, May 19 | 6:15 – 8 p.m.

Three leading authors have offered the IIE Annual Conference the opportunity to organize a book signing event during the Sunday Welcome Reception. They will be pleased to sign their most recent works on Creating a Lean and Green Business System: Techniques for Improving Profits and Sustainability by Keivan Zokaei, Hunter Lovins, Andy Wood and Peter Hines; Design for Six Sigma in Product and Service Development: Applications and Case Studies by Beth Cudney and Sandra Furterer; and Enterprise Growth Strategy by Dhirendra Kumar. Be one of the first to receive a personalized copy of these recommended works!

This book signing event is brought to you by SEMS.

Creating a Lean and Green Business SystemAuthor: Keivan Zokaei, Hunter Lovins, Andy Wood, and Peter HinesPublisher: CRC Press

Enterprise Growth Strategy - Vision, Planning and ExecutionAuthor: Dhirendra KumarPublisher: Gower

Design for Six Sigma in Product and Service Development: Applications and Case StudiesEditors: Elizabeth A. Cudney and Sandra L. FurtererPublisher: CRC Press

Using Hoshin Kanri to Improve the Value StreamAuthor: Elizabeth A. CudneyPublisher: Productivity Press

Implementing Lean Six Sigma throughout the Supply Chain: The Comprehensive and Transparent Case StudyAuthors: Elizabeth A. Cudney and Rodney KestlePublisher: Productivity Press

XIXwww.iienet.org/annual |

ChairsAnanth Krishnamurthy, University of Wisconsin-MadisonVictor Chan, Rensselaer Polytechnic Institute

track ChairsComputer and information SystemsSeokcheon Lee, Purdue UniversityHari Thiruvengada, Honeywell International Inc.

Construction researchLincoln Forbes, East Carolina UniversityLaura Hughes Ikuma, Louisiana State UniversityBrian Kleiner, Virginia Tech

energyVishnuteja (Vishnu) Nanduri, University of Wisconsin–MilwaukeeZhi Zhou, Argonne National Labs

engineering economyErick Jones, University of Texas ArlingtonGillian Nicholls, University of Alabama Huntsville

engineering educationCharlene Yauch, Milwaukee School of EngineeringLeonard Perry, University of San Diego

engineering ManagementCecilia Martinez, Clarkson UniversitySreekanth Ramakrishnan, IBMBrian Smith, Missouri S&T

Facility LogisticsDale Masel, Ohio UniversityAndrew Johnson, Texas A&M University

Healthcare SystemsAshley Benedict, New England Veterans Engineering Resource CenterStephanie Means, Western Michigan University

Homeland SecurityEd Pohl, University of ArkansasJose Ramirez-Marquez, Stevens Institute of Technology

Human Factors and ergonomicsKari Babski-Reeves, Mississippi State UniversityRichard Sesek, Auburn UniversityLinsey Steege, University of Missouri

ie in Latin AmericaFernando Salazar Arrieta, Pontificia Universidad JaverianaHomero Contreras, Universidad Popular Autónoma del Estado de Puebla

ie in MilitaryPaul Goethals, U.S. Military Academy

iie transactions Best paperSusan Albin, Rutgers University

Lean SystemsMD Sarder, University of Southern MississippiSharon Johnson, Worchester Polytechnic Institute

Manufacturing and DesignJohn Jackman, Iowa State University Jingyan Dong, North Carolina State University

Modeling and SimulationSujin Kim, National University of SingaporeJie Xu, George Mason University

operations researchSarah Root, University of ArkansasScott Grasman, Rochester Institute of Technology

process industriesDirk Van Goubergen, Ghent UniversityRan Jin, Virginia Tech

production planning and SchedulingLian Qi, Rutgers UniversityWanpracha (Art) Chaovalitwongse, University of Washington

Quality and reliability engineeringHaitao Liao, University of ArizonaJoseph Pignatiello, Air Force Institute of Technology

Service SystemsJun Zhuang, SUNY BuffaloSandra Eksioglu, Mississippi State University

Social, environmental and SustainabilityEliseo L. Vilalta-Perdomo, University of LincolnGregory Weisenborn, Fort Hays State University

Supply Chain and LogisticsManju Kamath, Oklahoma State UniversitySunderesh Heragu, University of Louisville

Systems engineeringLeon McGinnis, Georgia Institute of TechnologyRobert Cloutier, Stevens Institute of Technology

tutorialsGino Lim, University of HoustonJeffrey Herrmann, University of Maryland

Work SystemsRichard Elliott, The Boeing CompanyDongjoon Kong, The Boeing Company

Committees

2013 iSerC progrAM CoMMittee

XX | Welcome to the IIE Annual Conference & Expo 2013

track Chairs

Student Host Committee

Committees

2013 AppLieD SoLUtionS progrAM CoMMittee

tool Focused tracksengineering ManagementMark Jannone, Atlantic Health SystemHaleh Byrne, North Carolina State University – IES

LeanTina Agustiady, BASF ConstructionHaleh Byrne, North Carolina State University – IES

operations researchBrandy Heyde Montague, Disney TokyoKrishna Jha, Innovative Scheduling

Quality, reliability & Six SigmaAlaa Elwany, General MotorsLarry Graham

SimulationDanny Pavan, ArcelorMittal DofascoEd Williams, PMC

Systems engineeringJose Hernandez, John DeereJian Liu, University of ArizonaBiao Zhang, ABB

Work SystemsGeorge Bishop, West Monroe Partners LLCDongjoon Kong, Boeing Commercial Airplanes

Application Area Focused tracks Aerospace & DefenseMajid Abab, The Boeing Company

ConstructionLincoln Forbes, East Carolina UniversityGeorge Gardner, Virginia Department of TransportationIsabelina Nahmens, Louisiana State University

Computer & information SystemsSeokcheon Lee, Purdue UniversityHari Thiruvengada, Honeywell International Inc.

Health SystemsAmanda Mewborn, Perkins+WillMary Ellen Skeens, Philips Healthcare

iAB - industry Advisory BoardKatie Coperich, FedEx Joan Wagner, Spirit AeroSystems

Latin AmericanFernando Mata, Universidad de MonterreyBernardo Villarreal, Universidad de Monterrey

process industriesJoe Paris, Xonitek

SustainabilityDiana Berry, UPS Trade Management ServicesCurtis Bush, Grass Valley

Supply Chain & Service engineeringMaria Carolina Diaz, Office DepotMD Sarder, University of Southern Mississippi

Co-ChairsChristianne Cintrón Velez – Polytechnic University of Puerto Rico Rosemarie Santa Gonzalez – University of Puerto Rico at Mayagüez

CommitteeLorraine Martínez – University of Puerto Rico at Mayagüez Andrea McDougal – University of Puerto Rico at Mayagüez Jaymar Cruz Ortiz – University of Puerto Rico at Mayagüez (alternate co-chair) Rosiris Valentin – Polytechnic University of Puerto Rico

Faculty AdvisorsViviana Cesaní – University of Puerto Rico at Mayagüez Cuauhtémoc Godoy – Polytechnic University of Puerto Rico Lourdes A. Medina – University of Puerto Rico at Mayagüez Carlos Pons – Polytechnic University of Puerto RicoBetzabé Rodríguez – University of Puerto Rico at Mayagüez

Applied Solutions ChairJohn Corliss, PEER Consultants

incoming Applied Solutions Chair Kazuo Takeda, Disneyland Resort

outgoing Applied Solutions ChairGwen Campbell, DRS Imaging and Targeting Solutions

XXIwww.iienet.org/annual |

Keynote presentations

SUNDAY, MAY 19 | 9:30 – 10:45 A.M. | SAN GERONIMO BALLROOM

S. DAvID WuDean and Lee A. Iacocca Endowed Chair, P.C. Rossin College of Engineering and Applied Science, Lehigh University

David Wu is dean of the P.C. Rossin College of Engineering and Applied Science at Lehigh University, where he holds the Lee A. Iacocca endowed chair. Wu was appointed dean of the engineering college in 2004. A well-known scholar in operations research, he specializes in optimization, game theory and statistical analysis. He has received significant support for his research from the National Science

Foundation (NSF), U.S. Department of Defense, Semiconductor Research Corp. and Sandia National Laboratories. His work in the high-tech industry has been widely recognized and cited, earning best paper awards and significant media coverage, and it has been tested or implemented at firms such as Intel, Infineon, Freescale, Lucent and IBM. An IIE fellow, Wu has published more than 100 scholarly papers and served as editor or editorial board member on many journals, and he co-edited the best-selling book Handbook of Quantitative Supply Chain Analysis with David Simchi-Levi and Max Shen. Spearheading the development and implementation of Lehigh Engineering’s strategic plan, Elevating Engineering Excellence via Multidisciplinary Innovation, Wu helped reinvent and develop one of the most prestigious and reputable engineering schools in the United States. He has M.S. and Ph.D. degrees from Pennsylvania State University.

MONDAY, MAY 20 | 9:30 – 10:45 A.M. | SAN GERONIMO BALLROOM

Guy PRIMuSChief Operating Officer, Overbrook Entertainment

Guy Primus is chief operating officer at Overbrook Entertainment, the film, TV and transmedia production company founded by producer James Lassiter and actor/producer Will Smith. As COO, Primus oversees Overbrook’s operations and manages the company’s staff. He also leads Overbrook’s strategic ventures group and is co-founder and managing director of Tentpole Ventures, a seed-stage technology investment fund that focuses on consumer lifestyle companies. Primus serves on the board of directors of StarlingTV, the social TV platform that allows viewers to

chat, play and interact with one another while watching TV, and on the advisory boards of JibJab Media, MoviePass and Interactive One. Primus also is a member of the Georgia Tech Advisory Board and the advisory board of Georgia Tech’s School of Industrial and Systems Engineering. He also is on Georgia Tech’s Council of Outstanding Young Engineering Alumni. Prior to joining Overbrook, Primus was director of digital media at Starbucks Entertainment, group product marketing manager at Microsoft, and vice president of strategy and planning for Bad Boy Entertainment’s Blue Flame marketing and advertising agency. Primus earned his bachelor’s and master’s degrees in industrial engineering from Georgia Tech and his MBA from Harvard Business School.

TUESDAY, MAY 21 | 9:30 – 10:45 A.M. | SAN GERONIMO BALLROOM

FElIx DIAzPresident, Latin American Region, Pall Corp.

With more than 35 years of professional experience, Felix Diaz describes himself as a mentoring team builder, visionary change agent, and global operations and business leader. Shortly after earning a bachelor’s degree in industrial engineering, he began his career as a manufacturing engineer with Baxter Corp.’s Puerto Rico operations. Eventually, he began focusing his career in international and emerging markets. For seven years, he directed commercial organizations and businesses in Puerto Rico, the Caribbean, Spain and Portugal. He also served as vice president of manufacturing and

operations, president of Baxter Latin America and president of Baxter Southeast Asia. Diaz joined Pall Corp. in 2000 as vice president and general manager of the Life Sciences Business Center in California. Under his leadership, the organization was transformed from mostly low-tech manual management systems and operations to a high-tech R&D, engineering and manufacturing center of excellence. In 2004, Diaz became president of global operations for the Pall Life Science Business Group, managing 12 manufacturing facilities in the Americas and Europe, with more than 3,500 employees and more than $500 million in annual value of production. In 2008, he became president of the Pall Corp.’s Latin American Region, the senior business leader who would drive a major geographic expansion initiative in Latin America.

XXII | Welcome to the IIE Annual Conference & Expo 2013

Facility tours

get a behind-the-scenes look at processes and operations during facility tours. An additional fee is required to participate in each tour. please visit the registration desk for more information or to add a tour.

tours will depart from the hotel lobby.

StuDENt tOuRBacardi Corp.Monday, May 20 | 10 a.m. – Noon

The Bacardi facility tour will expose you to the history of the Bacardi family, their company and their brand. Travel through time, from the very beginnings of the company to the present. The tour will start with education about sugar cane and will continue with a visit to a replica of the first Bacardi distillery, including an exact replica of our founder’s first alembic. An introductory video will take you through the journey of the Bacardi rum preparation process, which will be complemented with the experience of smelling “rum directly from a barrel.” The tour will end with a visit to the distillery, which is an area reserved for special visitors. There, you will be exposed to the rum fermentation and distillation processes. We have no doubt that you will enjoy your visit and that it will be a memorable one.

tOuR REStRICtIONS•Thehostwillindicateduringthevisitwherephotosarepermitted.

StuDENt tOuR

Hospital español Auxilio Mutuo/triple-S Salud Monday, May 20 | 1 p.m. – 3 p.m.

Lean, in any setting, is a customer-focused management philosophy. In healthcare, lean means focusing on the patient as the primary customer. Patient focus and rising healthcare costs means designing processes and physical spaces with the patient in mind and minimizing wait times and travel distances. A joint improvement effort between the HMO Triple-S, the hospital facility Auxilio Mutuo, and the Polytechnic University of Puerto Rico will demonstrate how results can be achieved using lean healthcare tools and methods to improve the pre-registration process.Safety: This tour will be designed to have an exposure to real processes and changes in a patient-care-centered facility. It is expected that the group will follow all safety and regulation guidelines and observe strictly privacy rules when having access to areas where real patients are being assisted.

tOuR REStRICtIONS•Camerasallowed:Itmightbepossibletohavecameraswherethereisnocompromisewiththepatientprivacy laws and/or any internal guidelines at the hospital.•Specialneeds/equipment/shoes:Casualandcomfortableattireisrecommended.Theremaybelowtemperatures from air conditioning, so a jacket could be needed.

PROFESSIONAl tOuR

Medtronic puerto rico operations – JuncosAmgen Manufacturing Limited – JuncosTuesday, May 21 | 9 a.m. – 5 p.m.

Full-DAy tOuR: The tour will depart the Caribe Hilton at 9 a.m. – The group will travel to Juncos and visit both Medtronic and Amgen facilities. Lunch will be provided.

MEDtRONIC PuERtO RICO OPERAtIONS – JuNCOSThis tour will visit the Cardiac Rhythm and Disease Management (CRDM), Neuromodulation, Diabetes, and SurgicalTechnology (ST) divisions’ product lines manufactured at the Medtronic Inc. facility located in Juncos, Puerto Rico. Experi-ence first-hand the manufacturing side of medical device products such as implantable pacemakers and cardioverter defibrilla-tors; external insulin infusion pumps and continuous glucose monitoring (CGM) sensors for diabetes; neuro-stimulation sys-tems and implantable drug delivery systems for chronic pain, movement disorders, and urologic and gastrointestinal disorders; and disposable devices used in neural, spinal, ear, nose and throat (ENT), general, and orthopedic surgery.

tOuR REStRICtIONS•Securityissues:Temporaryvisitorbadgeswillbeissueduponarrival.•Competitorsaccepted:Yes,butconfidentialityagreementmustbesignedbyallvisitors.•Camerasandrecordingdevicesarenotpermitted.•Specialneeds/equipment/shoes:Lighttomoderatewalkinginamanufacturingcontrolledenvironment— comfortable closed shoes should be worn, 2-inch heel maximum.

AMGEN MANuFACtuRING lIMItED (AMl)Amgen discovers, develops, and delivers innovative human therapeutics. A biotechnology pioneer since 1980, Amgen thera-peutics have changed the practice of medicine, helping millions of people in the fight against cancer, kidney disease, rheuma-toid arthritis, bone disease, and other serious illnesses. With a broad and deep pipeline of potential new medicines, Amgen is committed to advancing science to improve people’s lives. A member of the community for more than 20 years, the Amgen facility in Puerto Rico has achieved an outstanding quality and compliance record, while the company has established solid relationships with the government, the local community, and academia. This plant visit will include a brief presentation of industrial engineering applications: a plant tour of one of our manufacturing operations, a tour to our Process Development lab and a discussion panel with members of our leadership team.

tOuR REStRICtIONS•Securityissues:Allvisitorsmuststandbyallhealth,security,safetyandenvironmentalregulationsandcompany work practices while on the site. All visitors must wear a visitor’s badge and must be escorted by an Amgen employee at all times during their visit. Firearms, knives or dangerous weapons are not permitted. •Competitorsaccepted:VisitorsmustdisclosureiftheyareAmgencompetitor’semployees.•Camerasandrecordingdevicesarenotpermitted.•Specialneeds/equipment/shoes:AMLisasmoke-freefacility.Therewillbelighttomoderatewalking,so comfortable closed shoes should be worn with 2 inches maximum heel. Open-toe or open-heel shoes are not allowed. Cellular phones are not allowed in classified areas or packaging rooms. Safety glasses (provided by AML) shall be worn at all times within the production areas. Additional restrictions are listed on the facility tours page of the IIE Annual Conference website.

XXIIIwww.iienet.org/annual |

Facility tours

XXIV | Welcome to the IIE Annual Conference & Expo 2013

pre-Conference Workshops

Using Hoshin Kanri to Accelerate Lean and Six SigmaBeth Cudney, Ph.D., Missouri University of Science and Technology Sunday, May 19, 8 a.m. – Noon | San Cristobal BAn integrated approach to process improvement using lean principles and Six Sigma begins with a strategic approach to identifying gaps between the current and future state. The goal of this integration is to optimize holistically the entire process of value flow by eliminating waste and controlling variation. Hoshin kanri encourages employees to reach the root cause of problems before searching for solutions, creating sustainable plans for implementation, incorporating performance metrics, and taking appropriate action for implementation. Though developed in Japan, this technique is based on Deming’s classic Plan-Do-Check-Act improvement cycle. Hoshin kanri drives the long-term strategic vision of the organization down throughout all levels of the organization. Lean and Six Sigma initiatives are then tied to the long-term success of the organization.

Who Should AttendThis workshop will be beneficial to mid- to upper-level management. Attendees should bring their organization’s strategic mission, vision, and objectives, which will be used to develop strategic plans and work on hoshin planning.

Sustaining a Lean transformation through people, process and Leadership

FocusMichael Testani and Sreekanth Ramakrishnan, IBMSunday, May 19 | 8 a.m. – 5 p.m. | San Cristobal CThis one-day workshop demonstrates the importance of integrating people, process and leadership techniques through hands-on activities and case study exercises. Participants will learn and apply techniques that they can use to help their organizations achieve and sustain their lean transformation goals.

Who Should AttendLean deployment leaders, managers and lean practitioners will all benefit from this workshop.

enhance your learning experience and maximize your networking opportunities with in-depth, skill-building workshops. An additional fee is required to reserve a pre-conference workshop seat.

XXVwww.iienet.org/annual |

Saturday, May 18Doctoral Colloquium8 a.m. – 5 p.m. | Flamingo AB

The Council of Industrial Engineering Academic Department Heads (CIEADH) and the Institute of Industrial Engineers (IIE) are hosting the 12th annual IIE Doctoral Colloquium.

This all-day event is designed for doctoral candidates expecting to graduate by spring 2014. Panels of experts will lead discussions on various topics of interest, including the job search, life in academia and industry, the tenure process, teaching, research, and professional service. Students are required to present their dissertation research in a poster session. A panel will review the posters and award a best poster designation. All posters will remain on display during the conference on Sunday in San Cristobal A.

new Faculty Colloquium8 a.m. – 5 p.m. | Flamingo CDThe Council of Industrial Engineering Academic Department Heads (CIEADH) and the Institute of Industrial Engineers (IIE) are hosting the 11th annual New Faculty Colloquium.

This all-day event is designed for new faculty, specifically junior faculty within their first three years on a tenure track assistant professor appointment, to provide information that can be useful for successfully navigating the challenges of an academic career and gaining tenure and promotion. Participants will have an opportunity to ask questions, network with peers, and interact with senior-level professors.

networking receptionHosted by the Sponsoring Universities6 – 7:30 p.m. | At the beachMeet old friends and make new ones as you enjoy the beautiful vistas on the beach of the Caribe Hilton. Dress is resort casual.

Conference events

XXVI | Welcome to the IIE Annual Conference & Expo 2013

Sunday, May 19

Undergraduate Student technical paper Competition Sponsored by John Deere 8 a.m. – Noon | AuditoriumThis competition recognizes excellence in technical writing at the undergraduate level. First place winners from 2013 regional conferences will participate. The finalists will give oral presentations in front of their peers and professional members.

Fellows Meeting8:45 a.m. – 2 p.m. | Las OlasThe Fellow Award is the highest classification of membership in IIE and is in recognition of outstanding leaders of the profession that have made significant, nationally recognized contributions to the field. Since 1950, more than 400 members have been awarded this honor. The Council of Fellows represents many of the most prominent members of the industrial engineering profession.

iie/Arena Student Simulation Competition presentations Sponsored by Rockwell Automation 1:30 – 4:30 p.m. | San Cristobal GTeams of three IE undergraduate students solve a real-world situational case study using the Rockwell Automation simulation package, Arena. Three finalist teams will present their solutions in front of their peers and professional members.

ABet Accreditation Workshop1 – 5 p.m. | San Cristobal FThis session is designed to help industrial engineering and industrial engineering technology department chairs and assessment coordinators prepare for upcoming ABET accreditation visits. The session is limited to 80 participants, and pre-registration is required.

innovations in Curriculum Competition Finals1 – 4 p.m. | AuditoriumThis event highlights outstanding innovation in the design or presentation of an accredited IE, ISE, IEOR, or similar engineering curriculum, or in a course that is part of an accredited curriculum. The competition recognizes faculty members who demonstrate outstanding creativity in instructional approaches or curriculum organization, design, or content, and who provide evidence of the effectiveness of their innovation.

Welcome reception6:15 – 8 p.m. | Exhibit HallMeet colleagues, view product demonstrations and discuss solutions with exhibitors or other attendees during this reception.

Conference events

XXVIIwww.iienet.org/annual |

Conference events

Monday, May 20

CieADH MeetingNoon – 5 p.m. | Las OlasMembers of CIEADH include those in charge of accredited industrial engineering and related programs. The purpose of CIEADH is to receive and act on recommendations from members; to sponsor activities and meetings; to discuss industrial engineering education, curriculum, accreditation, student activities, research, faculty development, and other appropriate matters and their relation to the technical development of industrial engineers; and to make recommendations resulting from such activities and discussions to IIE.

Honors & Awards Banquet and Ceremony7:30 – 9:30 p.m. | San Geronimo Ballroom

Honors & Awards Dessert reception9:30 – 10:30 p.m. | San Geronimo Ballroom FoyerHelp IIE honor the accomplishments of prominent practitioners and students with a variety of awards. Award winners will be posing for photos during the dessert reception. Award and scholarship winners not announced during the Monday evening ceremony will be recognized during Tuesday’s keynote speaker session. All award winners’ names will be listed on the slideshow during dinner.

Room for Half Page Ad[suggestions?]

Meet colleagues in similar industries and disciplines during iie’s town Hall Meetings.

Monday, May 20

tuesday, May 21

Sunday, May 19

latin American 11 a.m. – 12:15 p.m. | Flamingo AQuality Control & Reliability Division 11 a.m. – 12:15 p.m. | Guayacan

Society for Health Systems11 a.m. – 12:15 p.m. | San Cristobal F

Process Industries Division12:30 – 1:05 p.m. | San Cristobal B

Computer & Information Systems Division2 – 3:15 p.m. | San Cristobal G

lean Division2 – 3:15 p.m. | Ceiba

Society for Engineering & Management Systems2 – 3:15 p.m. | San Cristobal D

Construction Division3:30 – 4:45 p.m. | Auditorium

Engineering Economy Division5 – 6:15 p.m. | Flamingo A

Sustainable Development Division5 – 6:15 p.m. | San Cristobal C

Work Systems Division8 – 9:15 a.m. | San Cristobal E

Great lakes Region11 a.m. – Noon | Conference Room 10

logistics & Supply Chain Division11 a.m. – 12:15 p.m. | San Cristobal F

Manufacturing & Design Division12:30 – 1:45 p.m. | Flamingo C

Southeast Region1 – 2 p.m. | Conference Room 10

Industry Advisory Board5 – 6:15 p.m. | San Cristobal C

Operations Research Division5 – 6:15 p.m. | Conference Center A

XXVIII | Welcome to the IIE Annual Conference & Expo 2013

town Hall Meetings

XXIXwww.iienet.org/annual |

IIE membership is a crucial component of a successful career. From the latest news in the field to essential training and education or networking opportunities, IIE provides the resources you need to get ahead.

As a member of IIE, you have access to professional development, career resources, and the latest news, methods, and tools from the field.

5 Job search tools

5 Award-winning publications

5 Members-only webinars (more than 75 per year!)

5 Societies and Divisions (choose the topics most interesting to you)

5 High-quality training courses

5 Conferences and best practices seminars

5 Networking through regions and chapters

JOIN IIE

Join today by visiting www.iienet.org/Join. Institute of Industrial Engineers

iie’s Young professionals groupAre you under 35? take a look at these conference sessions selected for you by iie’s Young professionals group! this group was established to identify and serve the needs of members who are college graduates ages 35 and younger, strengthening the connection between young professionals and the iie community at large. identify other Young professionals by looking for the ribbon on their name badges.

Monday, May 20

XXX | Welcome to the IIE Annual Conference & Expo 2013

Young professional Schedule

8 – 9:15 a.m. | San Cristobal E

What Leaders Look for in promoting ies into ManagementIAB - INDUSTRY ADVISORY BOARD TRACK

Kazuo Takeda, Disneyland Resort

11:40 a.m. – 12:15 p.m. | Auditorium

Using 3-D Computer Simulation to improve Construction project planningCONSTRUCTION TRACK

Patrick Cloutier, Patrick Cloutier Conseil

2 – 3:15 p.m. | San Cristobal E

Coaching and Advising panel Discussion part iIAB - INDUSTRY ADVISORY BOARD TRACK

Majid Abab, The Boeing Company; Dennis Oates, FedEx

3:30 –- 4:45 p.m. | San Cristobal E

Coaching and Advising panel Discussion part iiIAB - INDUSTRY ADVISORY BOARD TRACK

Majid Abab, The Boeing Company; Dennis Oates, FedEx

5 – 5:40 p.m. | San Cristobal E

Leading as an individualIAB - INDUSTRY ADVISORY BOARD TRACK

Patrick Foxworthy, The MITRE Corporation

tuesday, May 21

Wednesday, May 22

Check out the Young professionals website for more!www.iieyoungprofessionals.org/

XXXIwww.iienet.org/annual |

Young professional Schedule

8 – 9:15 a.m. | San Cristobal B

What Are these things Called product Wheels - and Why Should i Care?PROCESS INDUSTRIES TRACK

Peter King, Lean Dynamics LLC

3 – 3:30 p.m. | Conference Room 10

Yp Board MeetingYOUNG PROFESSIONAL EVENT

Patrick Foxworthy, The MITRE Corporation; Alex Bohn, CareLogistics; David Rossi, Apple Inc.

3 – 5:05 p.m. | Event Center A

From Student to Young professionalSTUDENT TRACK

Alex Bohn, CareLogistics

6:30 – 7:30 p.m. | Oasis Lobby Bar

iAB/Yp Social HourIAB - INDUSTRY ADVISORY BOARD TRACK

8:40 – 9:15 a.m. | San Cristobal G

value Streams – the importance of Understanding themAEROSPACE AND DEFENSE TRACK

Brian McCarthy, The Boeing Company

9:25 – 10 a.m. | San Cristobal G

towards the Development of a tool evaluation Survey and replacement StrategyAEROSPACE AND DEFENSE TRACK

Katherine Meza, The Boeing Company; Lisa Bruchal, The Boeing Company

10 – 10:40 a.m. | San Cristobal B

reducing Supply Chain Costs By Maximizing truck Space UtilizationSUPPLY CHAIN & SERVICE ENGINEERING TRACK

Maria Carolina Diaz

SuNDAy, MAy 19 Event Room

5 - 6:30 p.m. Student Networking Mixer Las Olas

MONDAy, MAy 20 Event Room

7 - 8 a.m. Student Breakfast, sponsored by UPRM Event Center A

8 - 9:15 a.m. About Puerto Rico: History, Culture & Industry Event Center A

9:15 - 9:45 a.m. Special Musical Performance, Rondalla Municipal de Gurabo

Event Center A

1 - 2:15 p.m. Alternatives After College, Panel Discussion Event Center A

2:25 - 3:40 p.m. Graduate School Toolkit (Part I): “Daily Life during Grad School,” Panel Discussion/“How to Build your CV?”

Event Center A

3:50 - 6:30 p.m. Technical Knowledge: IE Software Tutorials Event Center A

6:30 p.m. – Midnight Student Off-Site Social, Old San Juan Event Center A

tuESDAy, MAy 21 Event Room

7 - 8 a.m. Student Breakfast, sponsored by UPRM Event Center A

8 - 9:15 a.m. IIE Student Chapter Best Practices Event Center A

1 - 2:15 p.m. Multicultural Managerial Skills, Panel Discussion Event Center A

2:25 - 3:40 p.m. Graduate School Toolkit (Part II): “How to Get Published?”/“Grant Proposal Writing”

Event Center A

3:50 - 5:05 p.m. From Student to Young Professional Event Center A

5:15 - 6:30 p.m. Social Responsibility Event Center A

6:30 p.m. - Midnight Student Social: Latin Night, Free Salsa Dancing Lessons

Pina Colada Club

XXXII | Welcome to the IIE Annual Conference & Expo 2013

Student track Schedule

XXXIIIwww.iienet.org/annual |

Special panels

Sunday, May 19

2 – 3:15 p.m. | Flamingo B

emerging research trends in operations researchModerator: Sheldon Jacobson, Program Director for Operations Research in the Division of Civil, Mechanical and Manufacturing Innovation, National Science FoundationPanelists: Maged Dessouky, Professor and Director of The Daniel J. Epstein Institute, University of Southern CaliforniaOnur Dulgeroglu, Business Systems Researcher, GE Global ResearchMichael Fu, Ralph J. Tyser Professor of Management Science, University of Maryland, College ParkRavi Ravindran, Professor of Industrial Engineering, Chair - Enterprise Integration Consortium, The Pennsylvania State University

3:30 – 4:45 p.m. | Flamingo B

emerging research trends in Homeland Security and emergency responseModerator: William A. Wallace, Professor of Decision Sciences and Engineering Systems, Rensselaer Polytechnic InstitutePanelists: James Luxhoj, Professor and Undergraduate Director, Rutgers UniversityRussell Wooten, IT Strategy Manager, U.S. Department of Homeland Security, Transportation Security AdministrationRajan Batta, Associate Dean for Research and Graduate Education, University at Buffalo (SUNY)Jean-Paul Watson, Principal Member of Technical Staff, Sandia National Laboratories

2 – 3:15 p.m.| San Geronimo Ballroom

effective Financial Measures for Lean / Six Sigma implementations: getting Alignment with the traditional Cost Accounting System A Presentation from the San Juan Host CommitteeModerator: Felix Negron, Vice-President of Operations, Medtronic Puerto RicoPanelists: Raul Cermeño, Controller, Amgen Puerto Rico Zilma Pacheco, Senior Director of Finance, Medtronic Puerto Rico Eric Santiago, Global Manufacturing Controller, Fenwal

One of the biggest challenges in a lean Six Sigma Program is to demonstrate how the results are impacting the financial bottom line of the organization. Unfortunately, there is not a direct relationship between the way the savings are captured in an L6S program and the traditional cost accounting system. A panel of financial and operations executives from multinational manufacturing corporations will present the methods they have been successfully using to get alignment between the L6S program and the cost accounting system.

iie’s Special panels offer a look at emerging and important areas of research on a variety of topics. Listen to a panel of experts give their views and offer advice on a range of topics including emerging research trends, funding opportunities, industry collaboration, engaging in interdisciplinary teams,

and opportunities for junior researchers, followed by a Q-and-A session with the audience.

Monday, May 20

XXXIV | Welcome to the IIE Annual Conference & Expo 2013

Special panels

2 – 3:15 p.m. | Flamingo B

emerging research trends in HealthcareModerator: Margaret Brandeau, Coleman F. Fung Professor, Stanford UniversityPanelists: Cerry Klein, Professor, University of MissouriEva Lee, Director, Center for Operations Research in Medicine and HealthCare, Georgia Institute of TechnologyEdwin Romeijn, Manufacturing Enterprise Systems Program Director, Advanced Manufacturing Cluster, National Science FoundationTeresa Zayas-Caban, Senior Manager of Health IT, Agency for Healthcare Research and Quality

3:30 – 4:45 p.m. | Flamingo B

emerging research trends in Advanced ManufacturingModerator: Richard Wysk, Dopaco Distinguished Professor, North Carolina State UniversityPanelists: Ronald Askin, Director of the School of Computing, Informatics and Decision Systems Engineering, Arizona State UniversityAbhijit Deshmukh, James J. Solberg Head of Industrial Engineering, Purdue UniversitySoundar Kumara, Professor, The Pennsylvania State University

Monday, May 20 (continued)

tuesday, May 21

2 – 3:15 p.m. | San Geronimo Ballroom

Managing risk and Uncertainty in global MarketsModerator: Gloria Bender, Managing Principal, TransSolutionsPanelists: Curt Burnett, Enterprise Manager Industrial Engineering, Deere & CompanyBram Corbijn van Willenswaard, Operations Manager, VDL Enabling Technologies BVJohn Crutchfield, Sr. Manager – Industrial Engineering, The Boeing CompanyDavid Poirier, CEO, The Poirier Group Joan Tafoya, Director - Supply Planning Operations, Intel Corporation

Members of the Council of Industrial Engineers will discuss their experiences working globally. Panelists will share strategies for managing risk and achieving manufacturing success in locations worldwide.

XXXVwww.iienet.org/annual |

Abstract ID: 492Workload Estimation Model for Patient Centered Medical Homes Saeede Ajorlou, Issac Shams and Kai Yang, Wayne State University

Abstract ID: 591Integrating E-Tools in Manufacturing Workforce Safety Training Melissa Dorlette Paul, Kapil Chalil Madathil, Kristin Frady, Melissa Zelaya, Anand Gramopadhye and Reshmi Koikkara, Clemson University

Abstract ID: 848Modeling and Analysis of Endoscope Reprocessing Operations Bryan Norman and Bopaya Bidanda, The University of Pittsburgh

Abstract ID: 934Defining 6R Operations in Sustainable Supply Chains through Functional Modeling Mohannad Shuaib and Fazleena Badurdeen, University of Kentucky

Abstract ID: 1307Value for Money Comparison with Traditional Economic Analysis Tools Samuel A. Bonet Olivencia and Mayra Méndez-Piñero, University of Puerto Rico

poster Sessions

Select authors will present their work in a poster format. view these in the San Cristobal A Ballroom.

poster track M1100 | room: San Cristobal A Monday, May 20, 11 a.m. | Poster Session M1

poster track M1230 | room: San Cristobal A Monday, May 20, 12:30 p.m. | Poster Session M2

Abstract ID: 74The Increasing Demand for Industrial Engineering Professionals in Costa Rica Johanna Madrigal, Libni Gamboa and Erik Gregory, ULACIT

Abstract ID: 288Assessing Lead Time Uncertainty in Tradition Bound Commodity Ordering Meredith Deneweth, Sankar Sengupta and Robert Van Til, Oakland University

Abstract ID: 412Block Allocation – Balancing Block Size, OR Requirements, and Risk Rebecca Weiss, Kevin Taaffe, Lawrence Fredendall and Narges Hosseini, Clemson University

Abstract ID: 426Effect of the Payment System on Puerto Rico’s Dairy Industry Supply Chain Dhania M. Silva-Troche and Betzabé Rodríguez, University of Puerto Rico Mayagüez Campus; Allison Y Wong-Cinco, University of Michigan

Abstract ID: 477Evaluating the Locations of Hand Sanitizer Dispensers in a Hospital Laila Cure, Western Michigan University; Richard Van Enk, Bronson Methodist Hospital

Abstract ID: 503Medical Device Training and Classification System Margaret Joanna Rys, Courtney Taylor and Mark Prieb, Kansas State University

Abstract ID: 667Developing a Mixed-Integer Mathematical Model to Schedule Treatment Rooms in a Proton Therapy Center Shima Mohebbi and Xueping Li, The University of Tennessee; Tom Berg, Y-12 National Security Complex; Mark Leuschner, ProCure Corp.; Yang Sun, California State University, Sacramento

Abstract ID: 829Using Biometric Adaptive Ergonomics to Accommodate Workers with Disabilities Michelle Kringen, Michelle Kringen, Adam Piper, Dean Jensen and Cody Kopriva, South Dakota School of Mines and Technology

Abstract ID: 1077Development of a Model for Multi-asset Pharmaceutical Laboratories in BogotaEver Angel Fuentes Rojas, Universidad Libre

Abstract ID: 1162Trends in Home Product Injuries: Comparisons between 1978-1982 and 2006-2010 Farhana Proma and Sheik Imrhan, University of Texas at Arlington

Abstract ID: 1324Socio-Technical Analysis of Factors Influencing Decisions to Adopt Electric Vehicles Ona Egbue and Suzanna Long, Missouri University of Science and Technology

Abstract ID: 1516Franchise Pricing in Retail Price OptimizationMehmet Gokhan, IBM

XXXVI | Welcome to the IIE Annual Conference & Expo 2013

poster Sessions

poster track t1100 | room: San Cristobal A tuesday, May 21, 11 a.m. | Poster Session t1

Abstract ID: 204Effect of Smart Parking Technology on Campus Parking System Efficiency using Discrete Event Simulation Glenn Surpris, Dahai Liu, Massoud Bazargan and Dennis Vincenzi, Embry-Riddle Aeronautical University

Abstract ID: 776Challenges and Opportunities in the IEM Undergraduate Degree Curricular RedesignArgelia Vargas-Moreno and Azucena Minerva García-León, Universidad Autónoma de Nuevo León

Abstract ID: 858What Are the Best Sources of Energy for Puerto Rico?Karla Iglesias and Mayra Méndez-Piñero, University of Puerto Rico

Abstract ID: 1085Design of a Logistic Model for the Supply Chain Leonard Eduardo Barrera Parra, Jeyson Andres Martinez Gamboa and Ever Angel Fuentes Rojas, Universidad Libre

Abstract ID: 1150What is the Best Pedestrian Preemption Warning?Denise Bauer and Richard Wall, University of Idaho

Abstract ID: 1350Cost Benefits Comparison of Port Trans-loading with Direct Shipping Matthew Norton, Knight Transportation; Xinxin Cui and Mohammad Rahman, The University of Southern Mississippi

Abstract ID: 1351Redesigning the Process Flow to Effectively Manage Student Records Tamika Gordon, Binghamton University

Abstract ID: 1407Emergency Rooms Design Using Simulation Francisco Ramis Universidad del Bio-Bio; Liliana Neriz, Universidad de Chile; Jose Sepulveda, University of Central Florida

poster track t1230 | room: San Cristobal A tuesday, May 21, 12:30 p.m. | Poster Session t2

Abstract ID: 574Effects of Resource Capacity Constraints on the Performance of a Multilevel/Multiproduct Supply Chain Tarek Al-Hawari, Samir Khrais and Ahmad Mumani, Jordan University of Science and Technology; Abdulaziz Ahmed, State University of New York at Binghamton

Abstract ID: 601Ethnic Disparities in Construction Safety and Health Alexander Baylis, Maria Alejandra Begazo and Luis Aguilar, Virginia Tech

Abstract ID: 650Decision-Making Framework for Capacity Calculation of Manufacturing Lines Cristina Pomales-García and Catherine Rosario, University of Puerto Rico-Mayagüez

Abstract ID: 682Design of a Development Model to Improve the Food Bank Processes Graciela Caffarel, Imelda de Jesus Loera-Hernandez, Juan Hinojosa and Carlos Chee, Tecnologico de Monterrey

Abstract ID: 1216System Dynamic Model of Defects Generation in Software Engineering Elena Villanueva-Guerra, Víctor Tercero-Gómez and María Alcorta García, Universidad Autónoma de Nuevo León

Abstract ID: 1272Development of Parabolic Trough Collectors for Agribusiness Applications Dehydrated Garcia Yazmani, Sergio Alonso, Javier Yanez-Mendiola, Javier Cruz and Oscar Cruz, CIATEC, A.C, Set Vejar, Universidad Politecnica de CNICA de Zacatecas

Abstract ID: 1348Distribution Network Study for Puerto Rico’s Commercial Cooperatives Gualberto Molina-Rivera and Roberto Seijo-Vidal, University of Puerto Rico, Mayagüez Campus

Abstract ID: 1417Process Modeling in the Housing Allowance Using Discrete Simulation Diana Carolina Martínez Hernández, Edith Yarlet Méndez Rivas and Oscar Mayorga Torres, Universidad Libre

XXXVIIwww.iienet.org/annual |

vendor presentations

tuesday, May 21 | 8 – 9:15 a.m. | San Geronimo Foyer C

Streamlining time Studies, Line Balancing, Lean Analysis, process improvement and MoreChristina Demuth, Accounts Manager, ProplannerGet your hands on the latest technology in video-based time studies, lean task classification, and man-machine charting as well as automatic line balancing, Yamazumi charting, and 3-D assembly visualization.

What you will learn:

Protime Estimation – streamline time studies, lean analysis, and process improvement•Videoorreal-timecbservations•Leantaskclassification•MTM,MOST,&Modaptsstandards•Man/machinechartsandanalysis

ProBalance – automatically generate efficient line balances•Auto-balancetotaktornumberofstationsusingtaskprecedence•Partandtoollistsbystation•AutomaticYamazumiandleancharts•Integratedvideoandpictureaccess

tuesday, May 21 | 11 a.m. – 12:15 p.m. | San Geronimo Foyer C

Creating Better Layouts, FasterChristina Demuth, Accounts Manager, ProplannerLearn about best practices in material flow analysis, tugger-route planning, and layout planning using Flow Planner software.

Flow Planner – create better layouts, faster•Layoutcomparisons(cost,distance,time)•Automatedaisleflowdiagrams•Materialshandlingutilizationsandcharts•AutomatedSLP(A,E,I,O,U,X)chartsanddiagrams

Speaker:Christina Demuth holds a B.S. in industrial engineering and an MBA from Iowa State University. As an accounts manager at Proplanner, Demuth provides support, implementation, training, and project management services to manufacturing companies for Proplanner’s process management software. Working with customers to understand their current business processes and develop strategies to improve their production planning business practices is an integral part of her role at Proplanner. Demuth currently supports a wide range of clients who manufacture aerospace, military vehicle, consumer appliance, transmission and power engine, oil and gas, electrical energy component, satellite, medical device, semiconductor, optical sorting, and lab testing equipment.

SuNDAy, MAy 19

11 a.m. – 4 p.m. Exhibitor Setup

6:15 – 8 p.m. Opening Night Welcome Reception (in Exhibit Area)

MONDAy, MAy 20

10:45 a.m. – 4 p.m. Exhibit Area Open

11:30 a.m. – 1 p.m. Lunch available for sale in Exhibit Area

4 p.m. Exhibit Area Closes

tuESDAy, MAy 21

10:45 a.m. – 4 p.m. Exhibit Area Open

11:30 a.m. – 1 p.m. Lunch available for sale in Exhibit Area

4 p.m. Exhibit Area Closes

4 – 6 p.m. Exhibit Tear-down

XXXVIII | Welcome to the IIE Annual Conference & Expo 2013

exhibit Hall

exhibit Hall visit the exhibit hall and see the latest innovations and product solutions to improve quality, process, and efficiency. in addition to product demos, attendees can network with their peers and discuss solutions and methods with exhibitors.

exhibit hours:

XXXIXwww.iienet.org/annual |

exhibitors

CRC Press – taylor & Francis Booth #6

CRC Press - Productivity Press - Taylor & Francis Group is a premier publisher of professional reference books, textbooks, and electronic databases in the field of Lean Production, Industrial Engineering and Manufacturing. Please stop by to view our latest offerings, pick up a free sample journal and take advantage of special show discounts ranging from 15-50% off.

6000 Broken Sound Parkway NW Suite 300Boca Raton, FL 33487P: (561) 998-0555 | (800) 374-3401www.crcpress.com

AmazonBooth #28

Amazon has created some inventive and game changing technologies and processes. Innovative new products like the Kindle, and the development of new ways for customers to leverage Amazon’s vast infrastructure through Fulfillment by Amazon, and Amazon Web Services, show that Amazon consistently drives change from the front of the pack.

410 Terry Ave. NSeattle, WA 98109P: (206) 266-1000www.amazon.comseanfi@amazon.com

IBM Corporation Booth #1

IBM® Rational is helping to lead the innovation agenda while addressing the complexity challenge. From collaborative planning and workflow management to requirements management, architecture and design, quality management, testing and configuration management, the IBM Rational solution provides integrated tools and practices for managing product and systems development.

1 New Orchard Road Armonk, NY 10504-1722 P: (800) IBM-4YOUwww.ibm.com/software/rational/

FlexSim Software Products Inc. Booth #9

FlexSim & FlexSim Healthcare provides features and technology not available in any other discrete event simula-tion software on the market. If you are interested in upgrading your simulation technology to FlexSim 3D simulation software please visit us and ask about the competitive upgrade offer.

1577 N Technology Way, Suite 2300Orem, UT 84097P: (801) 224-6914F: (801) 224-6984www.flexsim.com sales@flexsim.com

Human Factors and Ergonomics Society (HFES)

Booth #5

HFES is the world’s largest individual-member, multidisciplinary scientific association for human factors/ergonom-ics professionals. HFES members include engineers, psychologists, designers, scientists, and other professionals, all of whom have a common interest in design-ing products, systems, environments, and tools to be safe and effective for the people who use and support them.

P.O. Box 1369Santa Monica, CA 90406-1369P: (310) 394-1811F: (310) 394-2410http://hfes.orgcarlos@hfes.org

ASQ lean Enterprise Division Booth #4

The ASQ Lean Enterprise Division is a global network of over 6,000 profes-sionals helping individuals and organi-zations apply proven and leading edge Lean principles and practices to achieve dramatic results for your personal and organizational success. We have an active LinkedIn group with one-third of our worldwide membership and growing.

600 North Plankinton Avenue Milwaukee, WI, 53203P: (800) 248-1946 www.asq.org

*IBM and the IBM logo are trademarks of International Business Machines Corp., registered in many jurisdictions worldwide.

XL | Welcome to the IIE Annual Conference & Expo 2013

exhibitors

MHI Booth #29

MHI is the leading non-profit trade as-sociation representing the U.S. material handling, logistics and supply chain industry - The Industry That Makes the Supply Chain Work®. MHI’s 800 mem-ber companies are the industry’s leading solution providers. Their solutions and MHI professional development resources can be found at www.mhi.org.

8720 Red Oak Blvd., Suite 201Charlotte, NC 29217P: (704) 676-1190 | (800) 345-1815F: (704) 676-1199www.mhi.orgcustomerservice@mhi.org

North Carolina State university – Industrial Extension Service

Booth #12

IES brings North Carolina State Uni-versity’s College of Engineering to the workplace. This engineering expertise often results in lower operating costs, new and better products, and higher efficiencies. Since 2000, IES has helped create $2.28 billion in value to North Carolina businesses.

Campus Box 7902Raleigh, NC 27695-7902P: (919) 515-2358 | (800) 227-0264www.ies.ncsu.edu

Minitab Booth #15

Minitab is the leading provider of soft-ware for statistics education and Lean, Six Sigma, and quality improvement projects. For nearly 40 years we have been helping world-class organizations analyze problems, transform their busi-ness, and train their students. To learn more, visit www.minitab.com.

Quality Plaza1829 Pine Hall RoadState College, PA 16801P: (800) 448-3555F: (814) 238-4383www.minitab.comsales@minitab.com

North Carolina State university – Industrial and Systems Engineering

Booth #7

Educating the nation’s best and brightest for over 75 years, the Edward P. Fitts Department of Industrial and Systems Engineering at NC State University is dedicated to the multidisciplinary excel-lence industry and academia demand, has a history of outstanding alumni and faculty and is engaged in research of global importance.

111 Lampe Drive 400 Daniels HallCampus Box 7906Raleigh, NC 27695-7906P: (919) 515-2362www.ise.ncsu.edu

North Carolina State university – Engineering Online

Booth #10

The College of Engineering at North Carolina State University has 14 online degree programs. You can earn a gradu-ate degree from your home or work place. For more information, contact the Engineering Online office at (877) 254-0058 or visit the web site at http://EngineeringOnline.ncsu.edu

256 Page HallBox 7547Raleigh, NC 27695-7547P: (919) 515-5440 | (877) 254-0058http://EngineeringOnline.ncsu.edu

leanKit Booth #19

Industry leaders recognize LeanKit as the most scalable, Kanban-based online tool for managing processes and work-flow. With real-time updates and insight-ful metrics, teams can build processes in minutes, analyze cycle times and identify bottlenecks faster. LeanKit is used by Honeywell, Rolls-Royce, Siemens and more than 130,000 others worldwide. Try LeanKit free at leankit.com.

251 2nd Ave S, Ste 205Franklin, TN 37064P: (615) 219-1136www.leankit.cominfo@leankit.com

XLIwww.iienet.org/annual |

exhibitors

the tauber Institute for Global Operations Booth #18

The Tauber Institute for Global Operations at the University of Michigan is a multi-disciplinary program between the Ross School of Business and College of Engineering. Closely linked with major industry partners, the Institute gives students the tools to ascend to major operations leadership roles while also being on the vanguard of change and innovation.

701 Tappan Street, ER2615Ann Arbor, MI 48109P: (734) 647-0308F: (734) 647-1334www.tauber.umich.edutceccare@umich.edu

SAS Institute Inc., JMP Division Booth #3

JMP® is the SAS® software designed for dynamic data visualization on the desktop. Interactive, comprehensive and highly visual, JMP enables you to interact with your data to explore relationships, see hidden trends, dig into areas that interest you and move in new directions that you hadn’t yet considered.

100 SAS Campus DriveCary, NC 27513P: (919) 531-2144 | (877) 594-6567F: (919) 677-4444www.jmp.comcurt.hinrichs@jmp.com

taylor & Francis Group Booth #14

For two centuries, Taylor & Francis have been fully committed to the publication of scholarly information. We publish a wide variety of books and journals relevant to the field of industrial engineering, including IIE Transactions. Be sure to stop by our booth to view our products and to pick up FREE sample copies of our journals!

325 Chestnut St. Suite 800Philadelphia, PA 19106P: (215) 625-8900F: (215) 625-2940www.tandfonline.comJulie.sikora@taylorandfrancis.com

SIMul8 Corporation Booth #30

Powerful, Flexible, and Fast, SIMUL8 2013 is the benchmark for simulation software. Join the world’s largest organi-zations in creating powerful simulations that save millions of dollars. Stop by the booth to check out the new release and to find out more about our new SIMUL8 in Education scheme.

225 Franklin Street 26th Floor Boston, MA 02110P: (800) 547-6024www.SIMUL8.com

SMARt Scholarship for Service Program (ASEE)

Booth #21

The SMART Scholarship for Service Pro-gram is an opportunity for students pur-suing a degree in Science, Technology, Engineering, and Mathematics (STEM) disciplines to receive a full scholarship and be employed upon degree comple-tion at a DoD research facility. Schol-arships awarded include a stipend of $25,000 to $38,000 a year, full tuition, required fees, health insurance contribu-tion, and book allowance.

1818 N Street N.W. Suite 600Washington, DC 20036P: (202) 331-3524http://smart.asee.org

Proplanner Inc.Booth #2

Proplanner’s integrated Time Study, Line Balancing, Work Instructions (SOS/SOP), Factory Layout, Materials Handling (PFEP) solutions consistently assist companies in reducing the time to launch new products to assembly lines by over 50 percent. With Proplanner, companies can accurately and efficiently deploy new products to assembly lines in a few days.

2321 North Loop Drive, Suite 104Ames, IA 50010P: (515) 296-9914F: (515) 296-3229www.proplanner.cominfo@proplanner.com

XLII | Welcome to the IIE Annual Conference & Expo 2013

exhibitors

university of Southern California viterbi School of Engineering

Booth #16

The USC Viterbi School of Engineering offers a variety of master’s degrees, graduate certificates and continuing education programs on campus and online via DEN@Viterbi. Academic disciplines include: Industrial & Systems Engineering, Systems Architecting & Engineering, Engineering Management, Health Systems Management Engineering, Operations Research and Product Development Engineering.

3650 McClintock Ave. OHE 106Los Angeles, CA 90089P: (213) 740-4488F: (213) 821-0851http://viterbi.usc.edu/gappDEN@viterbi.usc.edu

the university of tennessee Center for Executive Education

Booth #17

The University of Tennessee Center for Executive Education is a leader in management education and business solutions. We are distinguished for our cutting-edge research, thought leadership and implementation focus.Our leadership position in TOPEX (Total Operations Excellence) is reflected through our programming in Lean, Supply Chain and Six Sigma/Process improvement.

College of Business Administration1000 Volunteer Blvd., Suite 603Knoxville, TN 37996P: (865) 974-1626F: (865) 974-4989http://ExecEd.utk.edu

uPS Booth #20

UPS is the world’s largest package delivery company, in terms of revenue and volume. Our supply chain solutions capabilities are available to clients in 175 countries and territories. Products and Services include: Specific Solutions such as High Tech, Healthcare, Retail, Automotive and Business Services; Logistics and Distribution Services; Transportation and Freight Services; and UPS Customs Brokerage.

www.ups.comwww.upsjobs.com

thomasNet.comBooth #11

ThomasNet.com is a free product sourcing and supplier discovery platform for professional and student engineers responsible for the sourcing of MRO, OEM and other products and services. ThomasNet.com contains over 610,000 suppliers, a taxonomy-powered Product Search for finding 100 million+ parts and a CAD library of millions of downloadable models.

5 Penn Plaza, 8th floorNew York, NY 10001P: (212) 629-2146www.thomasnet.comkcarty@thomasnet.com

XLIIIwww.iienet.org/annual |

exhibit Hall

IBM 1

Proplanner, Inc. 2

SAS Institute Inc, JMP Division 3

ASQ Lean Enterprise Division 4

Human Factors and Ergonomics Society

5

CRC Press - Taylor & Francis 6

North Carolina State ISE 7

FlexSim 9

North Carolina State EOL 10

ThomasNet.com 11

North Carolina State IES 12

Taylor & Francis 14

Minitab 15

University of Southern California

16

University of Tennessee 17

University of Michigan 18

LeanKit 19

UPS 20

SMART Scholarship for Service Program (ASEE)

21

Amazon 28

MHI 29

SIMUL8 30

exhibitor Listing by Booth:

0' 5' 10' 20' 30'

D

06

03

C

B

G

F

E

09 1115

16 18 19 2007 10 12 14

02

6ftx2ft

14.5'

LOCALHOST

7'

01

Foye

r A

6'

4'

4'

4'

4'

4'

6ftx2ft

6ftx2ft

STORA

GE

San

Ger

onim

o Ba

llroo

mFo

yer C

Foye

r B

17

2129 28

3004

8'

05

IIE Annual Conference and Expo 2013May 18-22, 2013

Caribe Hilton San Juan, Puerto Rico

Peacock Foyer30-8x10 booths

.

May 18-22, 2013Caribe Hilton • San Juan, Puerto Rico

ISERC SESSIONS

* asterisk =invited speaker Track: Lean Systems Session: Lean Healthcare Systems Chair(s): Sharon Johnson (Worcester Polytechnic Institute) Time & Place: S800 Room: Ceiba

Linking Lean Thinking and Health IT to Improve Healthcare Delivery Sharon Johnson (Worcester Polytechnic Institute), Bengisu Tulu (Worcester Polytechnic Institute), Diane Strong (Worcester Polytechnic Institute), Mustafa Ozkaynak (Worcester Polytechnic Institute), John Trudel (Reliant Medical Group), Lawrence Garber (Reliant Medical Group) Abstract No. 199 *

Lean Process Improvement for Medical/Surgical Unit in A Hospital Shi-Jie (Gary) Chen (Northern Illinois University), Steven Roberts (Northern Illinois University) Abstract No. 366 *

Track: Operations Research Session: Operations Research Applications 1 Chair(s): Matthew Petering (University of Wisconsin--Milwaukee) Time & Place: S800 Room: Conf Center A

Nonlinear Programming Applied to the Reduction of Inconsistency in the AHP Method Valdecy Pereira (Universidade Federal Fluminense (UFF)), Helder Costa (Fluminense Federal University) Abstract No. 532

Mixed integer programming for capacity analysis of a single track railway part III Matthew Petering (University of Wisconsin--Milwaukee), Mojtaba Heydar (University of Wisconsin--Milwaukee) Abstract No. 628

Nonlinear Optimization Model for the Control of Leishmaniasis in Bihar, India Using Insecticide Intervention Kaushik Gorahava (The University of Texas at Arlington), Anuj Mubayi (Northeastern Illinois University, IL, USA ), Jay Rosenberger (The University of Texas Arlington) Abstract No. 734

Multiproject cash flow optimization problem Hessamedin Vali (Wichita State University ), M. Bayram Yildirim (Wichita State University) Abstract No. 1045

Track: Operations Research Session: Inventory Applications of Operations Research Chair(s): Roberto Seijo-Vidal (University of Puerto Rico, Mayagüez Campus) Time & Place: S800 Room: Conf Center B

Approximation Algorithms for Optimal Inventory Policies under Stochastic Purchase Price Zhixue Xie (Tsinghua University), Peter Berling (Department of Industrial Management and Logistics, Lund University, Sweden), Li Zheng (Department of Industrial Engineering, Tsinghua University, Beijing, China) Abstract No. 490

A Continuous-Review Inventory Model with Multiple Replenishment Orders in the Presence of Regular Demand and Surge Demand Md Roni (Mississippi State University), Mingzhou Jin (The University of Tennessee at Knoxville) Abstract No. 1115

Models for Cost Efficient and Environmentally Friendly Inventory Replenishment Decisions for Perishable Products Gokce Palak (Mississippi State University), Sandra Eksioglu (Mississippi State University), Joseph Geunes (University of Florida) Abstract No. 1180

www.iienet.org/annual | 1 1

ISERC Sessions

Multi-Item, Multiple Constraints Inventory System Model Based on Inventory Value Roberto Seijo-Vidal (University of Puerto Rico, Mayagüez Campus), Yanira Ruiz-Cortes (University of Puerto Rico - Mayaguez Campus) Abstract No. 1314

Track: Healthcare Systems Session: Healthcare Transformation Chair(s): Ahmad Elshennawy (UCF) Time & Place: S800 Room: Conf Center C

On the Economic Assessment and Development of Emerging Medical Technologies Sean Carr (North Carolina State University), Stephen Roberts (North Carolina State University), Molly Purser (North Carolina State University) Abstract No. 59

An International Study of Technology Investment Decisions at Hospitals Christian Wernz (Virginia Tech), Hui Zhang (Virginia Tech), Kongkiti (Peter) Phusavat (Kasetsart University), Pooja Thakur (Virginia Tech) Abstract No. 549

Lean Implementation in Healthcare – The Challenged Transformation Dominic Breuer (Virginia Tech) Abstract No. 1028

Assessment and Implementation of Lean Sustainability in Healthcare Organizations Ahmad Elshennawy (UCF), Haitham Bahaitham (King Abdulaziz University - Rabigh Branch - Saudi Arabia), Sandra Furterer (Holy Cross Hospital) Abstract No. 1484

Track: Healthcare Systems Session: Care Coordination and Communication Chair(s): Jing Shi (North Dakota State University) Time & Place: S800 Room: Conf Center D

Improving Communication for Co-Managing Dual-Care Veteran Patients – A Survey Study Yidong Peng (North Dakota State University), Ergin Erdem (North Dakota State University), Jing Shi (North Dakota State University) Abstract No. 641

What is a Specialty Clinic Really Capable of? Muyuan Li (University of Central Florida), Serge Sala-Diakanda (University of Central Florida), Yiling He (University of Central Florida), Waldemar Karwowski (UCF) Abstract No. 1291

Track: IE in Latin America Session: Sustainability Chair(s): Homero Héctor Contreras Pulido (Universidad Popular Autónoma del Estado de Puebla) Time & Place: S800 Room: Conference 3

Industrial Engineering Management Education Focused on Sustainable Development Azucena Minerva García-León (Universidad Autónoma de Nuevo León), Patricia Gómez-Fuentes (Universidad Autónoma de Nuevo León), Elva Patricia Puente-Aguilar (Universidad Autónoma de Nuevo León), Arlethe Yari Aguilar-Villarreal (Universidad Autónoma de Nuevo León), Argelia Vargas-Moreno (Universidad Autónoma de Nuevo León) Abstract No. 771

Sustainability and Growth for Tuna Industry in Colombia Sergio Londono (Universidad de los Andes) Abstract No. 20

| Welcome to the IIE Annual Conference & Expo 20132

ISERC Sessions

Design of an Assessment Tool to Determine the Quality Level of Food Banks Processes Imelda de Jesus Loera-Hernandez (ITESM), Graciela Caffarel (Tecnologico de Monterrey), Heriberto Garcia-Reyes (Tecnologico de Monterrey), Paola Claros Ortuño (Instituto Tecnológico y de Estudios Superiores Monterrey) Abstract No. 1001

Track: Homeland Security Session: Disaster Prevention in Homeland Security Chair(s): Ryan Loggins (Rensselaer Polytechnic Institute) Time & Place: S800 Room: Conference 4/5

Continuous Facility Location for Distribution of Emergency Relief Supplies Hector Carlo (University of Puerto Rico - Mayaguez), Priscilla Saavedra (Univeristy of Puerto Rico - Mayaguez), Francisco Aldarondo (Univeristy of Puerto Rico - Mayaguez), Victor David (University of Puerto Rico - Mayaguez), Silmarie Torres (Univeristy of Puerto Rico - Mayaguez) Abstract No. 406

Integration and Optimization of Multiple Supply Chain Networks in Extreme Event Reconstruction Strategies Suzanna Long (Missouri University of Science and Technology), Varun Ramachandran (Missouri University of Science and Technology), Tom Shoberg (USGS), Steven Corns (Missouri University of Science and Technology, Rolla), Hector Carlo (University of Puerto Rico - Mayaguez) Abstract No. 338

MUNICIPAL: A Decision Technology for the Restoration of Critical Infrastructures Ryan Loggins (Rensselaer Polytechnic Institute), William A. Wallace (Rensselaer Polytechnic Institute), Burak Cavdaroglu (Rensselaer Polytechnic Institute) Abstract No. 1493

Track: Production Planning and Scheduling Session: Complex Production Planning and Scheduling Issues Chair(s): Gürsel Süer (Ohio University) Time & Place: S800 Room: Conference 6

Bi-objective Family Scheduling Problem with Fuzzy Math Modeling Aslican Arinsoy (Ohio University), Ozan Ates (Ohio University), Gürsel Süer (Ohio University) Abstract No. 1171

Production Planning with Load dependent Lead Time and Uncertain Demands Reha Uzsoy (North Caroina State University), Amirhossein Norouzi (North Carolina State University) Abstract No. 1184

Improving Shop Floor Level Performance in a Dynamic Lot Sizing Environment with Congestion Reha Uzsoy (North Caroina State University), Erinc Albey (North Carolina State University) Abstract No. 1185

Track: Work Systems Session: Work Systems: Measurement, Control, & Evaluation I Chair(s): Miguel González (The University of Texas - Pan American) Time & Place: S800 Room: Conference 7

Productivity Evaluation for Visually Impaired Employees - A Sewing Industry Application Mayra Méndez-Piñero (Univeristy of Puerto Rico), Cristina Pomales-García (University of Puerto Rico Mayaguez), María Irizarry (University of Puerto Rico) Abstract No. 668

A Real Time Productivity Measurement and Control System for Assembly Work Cells Miguel González (The University of Texas - Pan American), Ivonne Galvan (University of Texas - Pan American), Ana Ibarra (University of Texas - Pan American), Victor Ramirez (University of Texas - Pan American), Edi Sanjoto (ALPS Automotive) Abstract No. 700

www.iienet.org/annual | 3 3

ISERC Sessions

Time Study and Work Measurement: Impacts on Six Sigma Projects Erick Jones (University of Texas at Arlington), Vettrivel Gnaneswaran (University of Wisconsin-Platteville) Abstract No. 1411

Track: Service Systems Session: Applications in Humanitarian and Social Welfare Supply Chains Chair(s): Irem Sengul (North Carolina State University) Time & Place: S800 Room: Conference 8+9

Modeling for Equitable and Effective Food Distribution in North Carolina Irem Sengul (North Carolina State University), Julie Simmons Ivy (North Carolina State University), Reha Uzsoy (North Caroina State University) Abstract No. 1094 *

Characterizing Supply Uncertainty in Donation Driven Supply Chains Lauren Davis (North Carolina A&T State University), Steven Jiang (North Carolina A&T State University), Shona Morgan (North Carolina A&T State University) Abstract No. 511 *

A Simulation Model for Dispatching Emergency Vehicles under Multi-tiered Response Kanchala Sudtachat (Clemson University), Maria Mayorga (Clemson University) Abstract No. 841 *

Track: Quality and Reliability Engineering Session: Life Cycle Reliability Models and Optimization Chair(s): Zhaojun Li (Electro-Motive Diesel) Time & Place: S800 Room: Flamboyan

Parametric Modeling of Product Bathtub Curve for System Optimization Subhash Gedam (Electro Motive Diesels, Inc.), Zhaojun Li (Electro-Motive Diesel) Abstract No. 383 *

Reliability Optimization based on DFMEA-based Verification and Validation Zhaojun Li (Electro-Motive Diesels) Abstract No. 387 *

Optimal Sampling and Replacement using Bayesian Approach Farnoosh Naderkhani Zarrin Ghabaei (University of Toronto), Akram Khaleghei Ghosheh Balagh (University of Toronto), Viliam Makis (University of Toronto) Abstract No. 441

Optimal Scheduling of Inspections in Condition-Based Maintenance Models: A Myopic Policy Ji Ye Janet Sung (University of Toronto), Dragan Banjevic (University of Toronto) Abstract No. 1384

Track: Computers and Information Systems Session: Data Mining Techniques and Applications Chair(s): Ashraf Afify (King Saud University) Time & Place: S800 Room: Flamingo A

A Fuzzy On-line Discretisation Method for Rule Induction Classifiers Ashraf Afify (King Saud University) Abstract No. 655

A Conditional Inference Approach to Feature Selection Saylisse Davila (University of Puerto Rico-Mayaguez), Zemuel Román (University of Puerto Rico at Mayaguez) Abstract No. 1246

| Welcome to the IIE Annual Conference & Expo 20134

ISERC Sessions

Predicting TV Show Advertising Cost from Social Networking Sites Eugene Rex Jalao (Arizona State University) Abstract No. 1296

Track: Computers and Information Systems Session: Complex Optimization Chair(s): Juan Sáenz (University of Miami) Time & Place: S800 Room: Flamingo B

Metamodeling Studies on Simulation Optimization Mary Carmen Acosta Cervantes (University of Puerto Rico), María G. Villarreal-Marroquín (Department of Integrated Systems Engineering, The Ohio State University, Ohio, USA.), Óscar L. Chacón-Mondragón (Programa de Posgrado en Ingeniería de Sistemas, Universidad Autónoma de Nuevo León, Nuevo León, México.), Jose Castro (The Ohio State University), Mauricio Cabrera-Ríos (University of Puerto Rico, Mayaguez Campus) Abstract No. 1106

Sequential Monte Carlo-based Multi-objective Optimization Juan Sáenz (University of Miami), Nurcin Celik (University of Miami) Abstract No. 1281

Heuristics for Bandwidth Constrained Information Workflow Problems Michael Hirsch (Raytheon Company), Rakesh Nagi (University at Buffalo (SUNY)), Hector Ortiz-Pena (CUBRC), Moises Sudit (University at Buffalo/CUBRC) Abstract No. 495

Track: Manufacturing and Design Session: Manufacturing & Design in Puerto Rico Chair(s): Lourdes A. Medina (University of Puerto Rico at Mayaguez) Time & Place: S800 Room: Flamingo C

Impact of new product introduction to a food supply chain Betzabé Rodríguez (University of Puerto Rico- Mayagüez Campus), Lourdes Fernández (University of Puerto Rico), Leyda Ponce (University of Puerto Rico) Abstract No. 656 *

Medical Device Industry in Puerto Rico: The Medtronic Business Case Felix Negron (Medtronic) Abstract No. 675 *

Track: Modeling and Simulation Session: Simulation Applications in Supply Chain Chair(s): Gabriel Burnett (The Boeing Company) Time & Place: S800 Room: Flamingo D

Traveled Work in Supply Chains Adam Graunke (The Boeing Company), Gabriel Burnett (The Boeing Company) Abstract No. 226 *

Investigation of learning curves across a global production system Gabriel Burnett (The Boeing Company), Adam Graunke (The Boeing Company) Abstract No. 228 *

www.iienet.org/annual | 5 5

ISERC Sessions

Track: Quality and Reliability Engineering Session: QCRE Best Student Paper Competition Chair(s): Jamison Kovach (University of Houston) Time & Place: S800 Room: Guayacan

Reliability Analysis for Parallel Systems with Different Component Shock Sets Sanling Song (Rutgers University), David Coit (Rutgers University), Qianmei Feng (University of Houston) Abstract No. 583 *

Adaptive Sensor Allocation Strategy for Process Monitoring and Diagnosis Kaibo Liu (Georgia Institue of Technology), Jianjun Shi (Georgia Institute of Technology) Abstract No. 196

Minimizing Renewable Energy Integration Cost under Reliability and Power Quality Requirements James Barry (Texas State University - San Marcos), Jose Medellin (student co-author), Jett Piechota (student co-author), Matthew Harris (student co-author), Tongdan Jin (Texas State University), Eduardo Perez (Texas State University) Abstract No. 471

Reliability Assessment of Dependent Competing Risks with Mixed Shock Model Koosha Rafiee (University of Houston), Qianmei Feng (University of Houston), David Coit (Rutgers University) Abstract No. 932

Track: Supply Chain and Logistics Session: Retail Systems Chair(s): Juan Li (Xerox Innovation Group ) Time & Place: S800 Room: Maguey

Supplier-facilitated Transshipments with Positive Shipping Costs Jennifer Ryan (Rensselaer Polytechnic Institute), Rong Li (Washington University in St Louis) Abstract No. 246 *

A Survey of Apparel Retailer’s Satisfaction Kanchan Das (East Carolina University), Zahra Nakhostin Maher (East Carolina University) Abstract No. 446

Fulfilling Orders in a Multi-Echelon Capacitated On-line Retail System Juan Li (Xerox Innovation Group), John Muckstadt (Cornell University) Abstract No. 476

Track: Energy Session: Optimization in AC power flow modeling Chair(s): Changhyeok Lee (Northwestern University) Time & Place: S800 Room: Salon del Mar A

An Efficient Computational Method for Large-Scale Operations Planning Javad Lavaei (Columbia University), Somayeh Sojoudi (California Institute of Technology) Abstract No. 719 *

Two-Stage Robust Distribution Network Reconfiguration Problem Changhyeok Lee (Northwestern University), Cong Liu (Argonne National Laboratory), Sanjay Mehrotra (Northwestern University) Abstract No. 834 *

Solving Enhanced Coal Bed Methane Production Planning Problem Using Discretization and Linearization Techniques Anees Rahil (West Virginia University), Qipeng Zheng (West Virginia University), Yuping Huang (West Virginia University) Abstract No. 422

| Welcome to the IIE Annual Conference & Expo 20136

ISERC Sessions

Identifying Potential Areas for Siting Interim Nuclear Waste Facilities Using Map Algebra and Optimization Approaches Olufemi Omitaomu (Oak Ridge National Laboratory), Cheng Liu (Oak Ridge National Laboratory), Sacit Cetiner (Oak Ridge National Laboratory), Randy Belles (Oak Ridge National Laboratory), Gary Mays (Oak Ridge National Laboratory), Mark Tuttle (Oak Ridge National Laboratory) Abstract No. 249

Track: Engineering Education Session: Using Technology to Improve Learning & Engagement Chair(s): Subhashini Ganapathy (Wright State University) Time & Place: S800 Room: Tropical A

An Exploration of Gamification in the Context of Engineering Education John Morelock (Virginia Tech) Abstract No. 1451

Augmented Reality Based Education System for Effective Knowledge Transfer - Engineering Education Kushal Abhyankar (Wright State University), Subhashini Ganapathy (Wright State University) Abstract No. 67

Mobile Learning in Higher Education: An Empirical Analysis Yu Huang (University of Tennessee at Knoxville), Xueping Li (The University of Tennessee), Mehmet Aydeniz (University of Tennessee) Abstract No. 427

Technology and Free Media Content in Post-Secondary Engineering Education Jacob Viraldo (Purdue University), Ali Shafaat (Purdue University) Abstract No. 1374

Track: Engineering Management Session: Lean Applications in Healthcare Chair(s): John McCreery (North Carolina State University), Ravi Uppal (University of Akron) Time & Place: S800 Room: Tropical B

Hospital Design: Integrating Evidence-Based Design with Lean Principles and Practices Lukasz Mazur (University of North Carolina ), John McCreery (North Carolina State University) Abstract No. 161

A Systematic Strategy for Perioperative Process Improvement Di Li (University of Akron), Shengyong Wang (The University of Akron), Chris Powers (Summa Health System) Abstract No. 480

Re-engineering Nurse to Nurse Patient Handoff Process Using Lean Principles Ravi Uppal (University of Akron), Shengyong Wang (The University of Akron), Joyce Taylor (Lake Health), Mary Ogrinc (Lake Health), Whitney Lloyd (Lake Health), Tyan Clarke (Lake Health), Scott Neuhofs (Lake Health) Abstract No. 622

Emergency Department to Inpatient Admission Process Improvement: A Kaizen Approach Samita Athawale (The University of Akron), Shengyong Wang (The University of Akron), John Magill (Parma Community General Hospital) Abstract No. 588

www.iienet.org/annual | 7 7

ISERC Sessions

Track: Facility Logistics Session: Facility Logistics II - General Chair(s): Pratik Parikh (Wright State University) Time & Place: S800 Room: Tropical C

Location of Consolidation Facilities with Transshipment and Inventory Routing Considerations Ronald Askin (Arizona State University), Mingjun Xia (Arizona State University) Abstract No. 454 *

Distribution Planning for Products With Varying Life Cycles Pratik Parikh (Wright State University), Bhanuteja Sainathuni (Wright State University), Xinhui Zhang (Wright State University), Nan Kong (Purdue University) Abstract No. 459 *

Physical Internet Crossdocking Hub Design: A Simulation-Based Investigation Benoit Montreuil (Laval University), Zachary Montreuil (Laval University, CIRRELT), Russell Meller (University of Arkansas), Collin Thivierge (Laval University, CIRRELT) Abstract No. 863

Track: Lean Systems Session: Lean Student Paper Competition Chair(s): Ahad Ali (Lawrence Technological University) Time & Place: S1100 Room: Ceiba

Investigating the Impact of the Dynamics Associated with Increasing Responsiveness Level on Leanness Rehab Ali (Nile University) Abstract No. 1509 *

A Lean Route to Increase Transportation Agility and Food Freshness Javier Arriaga (Universidad de Monterrey) Abstract No. 1510 *

Track: Operations Research Session: Decision Making I Chair(s): Jeffrey Herrmann (University of Maryland) Time & Place: S1100 Room: Conf Center A

Mitigating Subjectivity in Multi-Attribute Group Decision-Making Problems Timothy Schmoke (Rochester Institute of Technology), Ruben Proano (Rochester Institute of Technology) Abstract No. 1055

Optimizing Test Plans to Improve Decision-Making with Uncertain Attribute Values Dennis Leber (National Institute of Standards and Technology), Jeffrey Herrmann (University of Maryland) Abstract No. 1156

Track: Operations Research Session: Operations Research Applications 2 Chair(s): Wei Wan (Claflin University), Diego José Gómez Montoya (U. Manuela Beltrán) Time & Place: S1100 Room: Conf Center B

Optimal Harvesting of a Replenishable Fish Stock: A Dynamic Game Model Analysis Wei Wan (Claflin University), Yuanyuan Peng (Claflin University), ChangFeng Wang (Beijing University of Posts and Telecommunication) Abstract No. 307

An Integer Programming Approach to Optimize Typing Methods on Smartphones Ashkan Negahban (Auburn University), Ilknur Uludag (Auburn University), Youngchul Yang (Auburn University) Abstract No. 540

| Welcome to the IIE Annual Conference & Expo 20138

ISERC Sessions

Application of Linear Optimization Methods in Poultry Production Ludivia Aguilar Noguera (Manuela Beltran), Diego José Gómez Montoya (U. Manuela Beltrán) Abstract No. 1347

Track: Healthcare Systems Session: Care Coordination and Work Analysis Chair(s): Tatiana Shefts (University of Washington) Time & Place: S1100 Room: Conf Center C

Prediction of Primary Care Patients Workload Nikila Ravi (University of Michigan), Jihan Wang (Wayne State University), Kai Yang (Wayne State Univeristy) Abstract No. 64

Bridging Primary and Specialty Care by Collaborative Healthcare Workflow Xiaoyu Ma (Wayne State University), Kai Yang (Wayne State university), Balmatee Bidassie (Veterans Affairs Center for Applied Systems Engineering) Abstract No. 248

Physicians Mental Workload Quantification during Cross-coverage in Radiation Treatment Planning Prithima Reddy Mosaly (University of North Carolina-Chapel Hill), Lukasz Mazur (University of North Carolina ), Bhisham Chera (University of North Carolina), Lawrence Marks Abstract No. 372

Concurrent Construction of Patient Panels and Care Provider Teams Tatiana Shefts (University of Washington), Sirirat Sujitnapitsatham (University of Washington), Paul Fishman (Group Health Cooperative), Joseph Heim (University of Washington), Zelda Zabinsky (University of Washington) Abstract No. 627

Track: Healthcare Systems Session: Anticoagulation Care Chair(s): Mustafa Ozkaynak (Worcester Polytechnic Institute) Time & Place: S1100 Room: Conf Center D

Six Sigma Approach to Monitor Compliance with Anti-Coagulation Guidelines Nicholas Coblio (James A Haley VAH), Nigara Dinova (VAH), Alexia Makris (USF College of Public Health) Abstract No. 970

Preparing For the Worst: A Key for Better Anticoagulation Management Mustafa Ozkaynak (Worcester Polytechnic Institute), Sharon Johnson (Worcester Polytechnic Institute), Adam Rose (Boston University School of Medicine), Abir Kanaan (Massachusetts College of Pharmacy and Health Sciences), Jennifer Donovan (Massachusetts College of Pharmacy and Health Sciences), Bengisu Tulu (Worcester Polytechnic Institute) Abstract No. 1069

Evaluation of Multiple Anticoagulation Management Delivery Methods using Observations and Time Studies Ashley Benedict (New England Veterans Engineering Resource Center), Ashley Benedict (New England Veterans Engineering Resource Center; Department of Veterans Affairs), Adam Rose (Center for Health Quality, Outcomes, and Economic Research, Boston University School of Medicine, Department of Veterans Affairs), Angela Park (Department of Veterans Affairs), Angela Fu (Department of Veterans Affairs), James Schlosser (New England Veterans Engineering Resource Center; Department of Veterans Affairs) Abstract No. 1464

Track: IE in Latin America Session: Education in Latin America Chair(s): Isidro M. Cristobal-Vazquez (Instituto Politecnico Nacional, UPIICSA) Time & Place: S1100 Room: Conference 3

Integrating Theory and Practice in Graduate Programme Curricula Shellyanne Wilson (The University of Trinidad and Tobago) Abstract No. 282

www.iienet.org/annual | 9 9

ISERC Sessions

Impacts of Mexican Culture on IE Students’ International Research Experience Erick Jones (University of Texas at Arlington), Vettrivel Gnaneswaran (University of Wisconsin-Platteville), Beatriz_Murrieta Cortes (Tecnológico de Monterrey- Querétaro) Abstract No. 1412

Identifying At-Risk Students Based on Personality, Temperament and Learning Preferences Alejandro Teran (ITAM), Sofia Martinez del Rio (ITAM), Ana Lidia Franzoni (ITAM) Abstract No. 1017

Track: Homeland Security Session: Methodologies for Improved Security Strategies Chair(s): Chase Rainwater (University of Arkansas) Time & Place: S1100 Room: Conference 4/5

Development of Stochastic Evolutionary Approach to designing Patrolling Schemes for Improved Security Mohammed Muaafa (Stevens Institute of Technology), Jose Ramirez-Marquez (Stevens Institute of Technology) Abstract No. 738

Multi-State Social Network Analysis under Conditional Influence with Limited Resources Kellie Schneider (University of Arkansas), Edward Pohl (University of Arkansas), Chase Rainwater (University of Arkansas) Abstract No. 784 *

A Constraint Programming Framework for Allocating Law Enforcement Resources Chase Rainwater (University of Arkansas) Abstract No. 785 *

Track: Production Planning and Scheduling Session: Production Planning and Scheduling 11 Chair(s): Robert Judd (Ohio University) Time & Place: S1100 Room: Conference 6

Efficient Modeling of a Job Shop with Recirculation of Jobs Manjeet Singh (Ohio University), Robert Judd (Ohio University) Abstract No. 98

Heuristic Scheduling Algorithm for Minimizing Makespan of Job Shops Manjeet Singh (Ohio University), Robert Judd (Ohio University) Abstract No. 99

Evaluation of Production Orders Split in Electrostatic Painting Company Diana Carolina Forero Riveros (Universidad Libre - Colombia), Oscar Mayorga Torres (Universidad Libre) Abstract No. 879

Track: Work Systems Session: Work Systems: Design, Analysis, & Optimization Chair(s): Richard Elliott (The Boeing Company) Time & Place: S1100 Room: Conference 7

Using a Systems Dynamics Model to Assess Skill Level Impact Jill Urbanic (University of Windsor), George Bacioiu (Government of Canada) Abstract No. 624

Modeling an Aging Workforce and Its Impact on Engineering Project Selection, Execution and Completion Mario Marin (University of Central Florida), Christopher Geiger (University of Central Florida) Abstract No. 1164

| Welcome to the IIE Annual Conference & Expo 201310

ISERC Sessions

Track: Service Systems Session: Organizational Decision Making in Humanitarian Logistics Chair(s): Kevin Taaffe (Clemson University) Time & Place: S1100 Room: Conference 8+9

Game Theory in Disasters: Cooperative and Noncooperative Games in Partner Selection John Coles (University at Buffalo), Jun Zhuang (University at Buffalo, SUNY) Abstract No. 258 *

Humanitarian Transportation Planning: Human and Modeling Approaches Erica Gralla (George Washington University), Jarrod Goentzel (Massachusetts Institute of Technology), Charles Fine (Massachusetts Institute of Technology) Abstract No. 813 *

Improving Volunteer Productivity and Retention during Humanitarian Relief Efforts Kevin Taaffe (Clemson University), Kyle Lassiter (Clemson University), Abdelwahab Alwahishie (Clemson University) Abstract No. 169 *

Track: Quality and Reliability Engineering Session: Change Point Detection in Statistical Process Control Chair(s): Eric Chicken (Florida State University) Time & Place: S1100 Room: Flamboyan

Distribution-Free Changepoint Detection for Nonlinear Profiles Kelly McGinnity (Florida State University), Eric Chicken (Florida State University), Joseph Pignatiello (Air Force Institute of Technology) Abstract No. 269

Test for a Change-Point in the Mean of Normal Observations Víctor Tercero-Gómez (Universidad Autónoma de Nuevo León), Jorge Garza-Venegas (Universidad Autónoma de Nuevo León), Alvaro Cordero-Franco (Universidad Autónoma de Nuevo León) Abstract No. 1329

Change point estimation after a Gamma control chart Ángel Pérez Blanco (Universidad Autónoma de Nuevo León), Alvaro Cordero-Franco (Universidad Autónoma de Nuevo León), Víctor Tercero-Gómez (Universidad Autónoma de Nuevo León) Abstract No. 1388

Alternative Upper Control Limit Methods for Change Point Detection Rachel Becvarik (University of Wisconsin - Platteville), Eric Chicken (Florida State University), Joseph Pignatiello (Air Force Institute of Technology) Abstract No. 274

Track: Computers and Information Systems Session: Design & Control of Distributed Information Systems Chair(s): Islam Ali (Purdue University) Time & Place: S1100 Room: Flamingo A

Community Detection for Web Service Composition John Jung-Woon Yoo (Bradley University), Ali Rahmati (Bradley University) Abstract No. 1382

Best Routing in IP-over-WDM Networks and Its Corresponding Failure Localization Tachun Lin (Cameron University), Zhili Zhou (IBM Research) Abstract No. 706

www.iienet.org/annual | 11 11

ISERC Sessions

An Iterative, Cluster-based Routing Protocol Based On Energy Welfare for Maximizing Network Lifetime in Wireless Sensor Networks Putai Yang (Purdue University), Seokcheon Lee (Purdue University), Islam Ali (Purdue University) Abstract No. 73

Track: Tutorials Session: Big Data Analytics Chair(s): Jeffrey Herrmann (University of Maryland) Time & Place: S1100 Room: Flamingo B

Foundations of Complex Networks Based Techniques for Big Data Analytics Soundar Kumara (The Pennsylvania State University), LiYing Cui (Starbucks Coffee Company) Abstract No. 1469 *

Track: Manufacturing and Design Session: Biomedical Manufacturing - I Chair(s): Ibrahim Tarik Ozbolat (The University of Iowa) Time & Place: S1100 Room: Flamingo C

Manufacturing Systems for Autologous Regenerative Medicine Products Paul Cohen (NC State University), Molly Purser (North Carolina State University), Peter Prim (NC State University), Sean Carr (North Carolina State University), Rohan Shirwaiker (NC State University), Richard Wysk (North Carolina State University) Abstract No. 912

3D Functional Organ Printing: Promises and Future Challenges Ibrahim Tarik Ozbolat (The University of Iowa) Abstract No. 6

Parametric Assessment of the Microencapsulation Process for Improved Bio-Substance Entrapment Michael Halldorson (Texas Tech), Iris Rivero (Iowa State University) Abstract No. 1297

Track: Modeling and Simulation Session: Simulation Applications in Healthcare I Chair(s): Jordan Peck (Veterans Health Administration) Time & Place: S1100 Room: Flamingo D

Improving Access by Panel Size Approach in Mental Health in Veterans Affairs Health System Pinar Dursun (Istanbul Technical University / Massachusetts Institute of Technology), Mehmet Erkan Ceyhan (Lean Advancement Initiative, Massachusetts Institute of Technology), Bradley V. Watts (White River Junction VAMC), Brian Shiner (White River Junction VAMC) Abstract No. 39 *

Evaluation of Embedded Behavioral Health Program Kagan Gokbayrak (Massachusetts Institute of Technology), Onur Kayali (Massachusetts Institute of Technology) Abstract No. 697 *

Association of Home Telemonitoring and Other Predictors with Hospital Admissions Benjavan Upatising (Purdue University), Sharon L. Christ (Purdue University, Professor, Department of Human Development & Family Studies and Department of Statistics), Yuehwern Yih (Purdue University), Gregory J. Hanson (Mayo Clinic, Assistant Professor of Medicine), Paul Y. Takahashi (Mayo Clinic, Associate Professor of Medicine) Abstract No. 1354

Modelling the flow effects of prediction in a hospital Jordan Peck (Veterans Health Administration), James Benneyan (Northeastern University), Deborah Nightingale (Massachusetts Institute of Technology), Stephan Gaehde (Veterans Health Administration) Abstract No. 38 *

| Welcome to the IIE Annual Conference & Expo 201312

ISERC Sessions

Track: Quality and Reliability Engineering Session: Advanced Topics in Reliability Engineering and Service Logistics Chair(s): Maryam Hamidi (University of Arizona), Haitao Liao (University of Arizona) Time & Place: S1100 Room: Guayacan

Accelerated Life Testing Model for a Generalized Birnbaum-Saunders Distribution Yao Cheng (Rutgers University), Elsayed Elsayed (Rutgers University) Abstract No. 586 *

A Game-Theoretic Model for Establishing Maintenance Service Contracts Maryam Hamidi (University of Arizona), Haitao Liao (University of Arizona), Ferenc Szidarovszky (University of Arizona) Abstract No. 597 *

A Generic Bayesian Approach for Model-based Prognostics with Laplace Approximation Liang Xu (Wichita State University), Pingfeng Wang (Wichita State University) Abstract No. 643 *

A Method to Detect Failure Dependency Structure under Competing Risks Qingyu Yang (Wayne State University), Nailong Zhang (Wayne State University) Abstract No. 644 *

Track: Supply Chain and Logistics Session: Green Supply Chain Chair(s): Sarah Ryan (Iowa State University) Time & Place: S1100 Room: Maguey

An Effective Green Supply Chain at Energy Production Emad Abouel Nasr (Department of Mechanical Engineering, Faculty of Engineering, Helwan, Egypt and College of Engineering, King Saud University), Khaled Gad El Mola (Department of Mechanical Engineering, Faculty of Engineering, Helwan, Cairo, Egypt and Department of Mechanical Engineering, Industrial Engineering Program, College of Engineering in Al Kharj, Salman Bin Abdul-Aziz University, KSA), Abdulaziz El-Tamimi (King Saud University, College of Engineering) Abstract No. 92

Optimization of Transportation and Inventory Decisions under Carbon Emissions Considerations Fatih Mutlu (Qatar University), ADEL ELOMRI (QATAR UNIVERSITY) Abstract No. 368

Robust Design of a Closed-loop Supply Chain Under Carbon Regulation Uncertainty Seyyed Ali Haddad Sisakht (Iowa State University), Sarah Ryan (Iowa State University) Abstract No. 996

Track: Energy Session: Modeling Energy, Water, and Climate Change Policy Chair(s): Ivan Saavedra (University of Wisconsin-Milwaukee), Vishnu Nanduri (Univ. of Wisconsin-Milwaukee) Time & Place: S1100 Room: Salon del Mar A

A Competitive Markov Decision Process Model for the New Energy-Water-Climate Change Nexus Vishnu Nanduri (Univ. of Wisconsin-Milwaukee), Ivan Saavedra (University of Wisconsin-Milwaukee) Abstract No. 1167 *

Statistical survival models to predict customer engagement and electricity consumption pattern. Felipe Feijoo (University of South Florida), Alireza Ghalebani (University of South Florida), Tapas Das (University of South Florida) Abstract No. 717 *

Multiobjective Optimization and RL for identifying Optimal Emissions and Water Taxes in Electricity Markets Ivan Saavedra (University of Wisconsin-Milwaukee), Vishnu Nanduri (Univ. of Wisconsin-Milwaukee), Roshan D'Souza (University of Wisconsin-Milwaukee) Abstract No. 1166 *

www.iienet.org/annual | 13 13

ISERC Sessions

Track: Human Factors and Ergonomics Session: Biomechanics Chair(s): Jian Liu (Marshall University) Time & Place: S1100 Room: Salon del Mar B

Perturbation Training Reduces Low Back Injury Risks during Unexpected Slips Jian Liu (Marshall University), Joshua Paek (University of Houston) Abstract No. 155

Neck and Shoulder Muscle Coactivations Assessment: A Study of Dentists Regina Pope-Ford (North Carolina A&T State University), Zongliang Jiang (North Carolina A&T State University) Abstract No. 558

Effect of Stretcher Mobility Related Design Features on Healthcare Workers Steven Butt (Western Michigan University), Tycho Fredericks (Western Michigan University), Laila Cure (Western Michigan University), James Burns (Western Michigan University), Kimberly Harms (Western Michigan University) Abstract No. 933

Estimation Errors When Using Interpolation Methods For Lifting Trajectory Predictions Chien-Chi Chang (Liberty Mutual Research Institute for Safety), Xu Xu (Liberty Mutual Research Institute for Safety) Abstract No. 1209

Track: Engineering Education Session: Entrepreneurship Education Chair(s): Sadan Kulturel-Konak (Penn State Berks) Time & Place: S1100 Room: Tropical A

Best Practices and Challenges of Managing International Entrepreneurship Teams Sadan Kulturel-Konak (Penn State Berks) Abstract No. 659 *

Using Virtual Computing to Promote Student-Led Innovations Abdullah Konak (Penn State Berks) Abstract No. 660 *

A Rubric to Assess Entrepreneurship in Engineering Education M. Bayram Yildirim (Wichita State University), John Sluder (Colorado Mesa University/WCCC), Mehmet Barut (Wichita State University) Abstract No. 1262 *

Track: Engineering Management Session: Engineering Management in Healthcare - 1 Chair(s): Javier Calvo-Amodio (Oregon State University) Time & Place: S1100 Room: Tropical B

Application of the Transition-Phase Management Model in a Healthcare Environment Javier Calvo-Amodio (Oregon State University) Abstract No. 224 *

Simulation-Based Patient Flow Modeling and Operational Planning for an Outpatient Center Samita Athawale (The University of Akron), Shengyong Wang (The University of Akron), John Magill (Parma Community General Hospital) Abstract No. 589

| Welcome to the IIE Annual Conference & Expo 201314

ISERC Sessions

Track: Facility Logistics Session: CELDi - Facility Logistics Chair(s): James Noble (University of Missouri) Time & Place: S1100 Room: Tropical C

Integrated Process Planning and Scheduling for Film Manufacturing Andrew Henry (Virginia Tech), Kimberly Ellis (Virginia Tech) Abstract No. 112 *

The Impact of Facility Capacity on Reverse Logistics Network Design Gaohao Luo (U of Missouri), James Noble (University of Missouri), Wooseung Jang (University of Missouri) Abstract No. 114 *

Performance Metrics Analysis for Aircraft Maintenance Process Control Robert Allen (Clemson University), Kevin Taaffe (Clemson University), Lindsey Perrone (Lockheed Martin Corporation) Abstract No. 308 *

Track: Lean Systems Session: Lean Culture Chair(s): Fazleena Badurdeen (University of Kentucky) Time & Place: S1230 Room: Ceiba

Problem Solving for Continuous Improvement: The Role of Organizational Culture Saket Fadnavis (University of Kentucky), Fazleena Badurdeen (University of Kentucky) Abstract No. 177 *

Systematic Innovation in a Lean Management Environment Helena Navas (Universidade Nova de Lisboa, Faculdade de Ciências e Tecnologia), Virgilo Machado (New University of Lisbon (UNL)/ Faculty of Sciences and Technology(FCT)) Abstract No. 369

Accelerating Business Improvement - the power of effective interactions Kathy Million (S A Partners USA), Kevin Eyre (S A Partners Consultant), Gary Hourselt (S A Partners Consultant) Abstract No. 1439

Simulation Models for Analyzing Lean Implementation strategies Yamkelani Moyo (Auburn University), Yamkelani Moyo (Auburn University), Ali Aldubaisi (Auburn University), John Evans (Auburn Universty), Tom Devall (Auburn University) Abstract No. 1232

Track: Operations Research Session: Transportation Applications of Operations Research 2 Chair(s): Lihui Bai (University of Louisville) Time & Place: S1230 Room: Conf Center A

Models for Optimal Charging Scheduling for Electric Vehicles Guangyang Xu (University of Louisville), Lihui Bai (University of Louisville) Abstract No. 449

Geographical Zone Partitioning Framework Using Multi-Objective Optimization Nitin Sharma (University of Alabama in Huntsville), James Swain (University of Alabama in Huntsville) Abstract No. 1064

Multi-Period Inventory Routing Decisions for a Two-Echelon Supply Chain Ling Zu (Clemson University), Wennian Li (Department of Industrial Engineering, Clemson University), Mary Kurz (Department of Industrial Engineering, Clemson University) Abstract No. 1088

www.iienet.org/annual | 15 15

ISERC Sessions

Analysis of Mathematical Optimization Modeling for Transportation: Systematic Procedure Clasification Camilo Guerrero Rodríguez (Universidad Distrital Francisco José de Caldas), Leidy Johana Rodríguez Merchán (Universidad Distrital Francisco José de Caldas), César Amílcar López Bello (Universidad Distrital Francisco José de Caldas) Abstract No. 1271

Track: Operations Research Session: Healthcare Models Chair(s): Steven Shechter (University of British Columbia) Time & Place: S1230 Room: Conf Center B

Optimal allocation of operating room time between surgical services Steven Shechter (University of British Columbia), Stephanie Carew (UBC), Mahesh Nagarajan (University of British Columbia) Abstract No. 991

A Linear Model for Continuous Path Treatments for Stereotactic Radiosurgery Dionne Aleman (University of Toronto), Kimia Ghobadi (University of Toronto), David Jaffray (Princess Margaret Hospital), Mark Ruschin (Sunnybrook Hospital) Abstract No. 1256

Triage Risk Minimization Behrooz Kamali (Virginia Tech), Douglas Bish (Virginia Polytechnic Institute and State University) Abstract No. 986

Analysis of Pediatric Asthma Patient Flows through the Emergency Department Emily Burns (University of Michigan), Amy Cohn (University of Michigan), Michelle Macy (University of Michigan), Allison Cator (University of Michigan), Joseph East (University of Michigan), Tara Lynn O'Gara (University of Michigan) Abstract No. 1127

Track: Healthcare Systems Session: Decision Making in Healthcare Chair(s): David Claudio (Montana State University) Time & Place: S1230 Room: Conf Center C

Coordinated Changes on Relative Genetic Expression of Potential Lung Cancer Biomarkers Nicole Ortiz (UPR Mayaguez), Enery Lorenzo (University of Puerto Rico Mayaguez Campus ), Yazely cruz (co-author), Mauricio Cabrera-Ríos (University of Puerto Rico, Mayaguez Campus), clara isaza (co-author) Abstract No. 527

A Holistic Approach for Integrated Decision Making in Healthcare System Anali Huggins (Montana State University), Shuchisnigdha Deb (Montana State University), David Claudio (Montana State University), Maria Velazquez (Co-Autor) Abstract No. 1063

Supporting Strategic Decision-Making in Healthcare Systems through Complexity Management Serge Sala-Diakanda (University of Central Florida), Muyuan Li (University of Central Florida), Waldemar Karwowski (UCF) Abstract No. 1290

Track: Homeland Security Session: Infrastructure Resilience Analysis 1 Chair(s): Kash Barker (University of Oklahoma) Time & Place: S1230 Room: Conference 4/5

Bayesian Kernel Model for Disruptive Event Data Hiba Baroud (University of Oklahoma), Kash Barker (University of Oklahoma), Raychal Lurvey (University of Oklahoma), Cameron MacKenzie (University of Oklahoma) Abstract No. 538 *

| Welcome to the IIE Annual Conference & Expo 201316

ISERC Sessions

Resilience Model Considering Disruptions in Crude Oil Supply Chain Networks Qing Li (Stevens Institute of Technology), Jose Ramirez-Marquez (Stevens Institute of Technology) Abstract No. 684 *

Track: Production Planning and Scheduling Session: Production Planning and Scheduling 10 Chair(s): Marouen BenJebara (University of Toledo) Time & Place: S1230 Room: Conference 6

Introduction of a Learning Effect into Single Machine Stochastic Scheduling To Improve Model Performance on Risky Jobs Gokhan Egilmez (Ohio University), Diana Schwerha (Ohio University) Abstract No. 55

Costing Considerations in Dynamic Lot Sizing Ram Rachamadugu (University of Toledo), Marouen BenJebara (University of Toledo) Abstract No. 842

Track: Work Systems Session: Work Systems: Measurement, Control, & Evaluation II Chair(s): Dongjoon Kong (The Boeing Company) Time & Place: S1230 Room: Conference 7

Work Measurement in the 21st Century Andris Freivalds (The Pennsylvania State University) Abstract No. 1458 *

IE-Renaissance based on the Fundament of Time Data Management Peter Kuhlang (Vienna University of Technology), Olga Erohin (TU Dortmund University), Matthias Krebs (TU Dortmund University), Jochen Deuse (TU Dortmund University), Wilfried Sihn (Vienna University of Technology) Abstract No. 192

Track: Service Systems Session: Risk and Decision Making in Food Supply Chains Chair(s): Lauren Davis (North Carolina A&T State University) Time & Place: S1230 Room: Conference 8+9

Import Security: Assessing the Risks of Imported Food Jonathan Welburn (University of Wisconsin - Madison), Vicki M. Bier (University of Wisconsin-Madison), Steven Hoerning (University of Wisconsin - Madison) Abstract No. 310 *

Assessing Consumer Morbidity from Food Contamination in Multiple Distribution Channels Raquel Teasley (North Carolina A&T State University), Jessye Bemley (North Carolina A&T State University), Lauren Davis (North Carolina A&T State University), Alan L. Erera (Georgia Institute of Technology), Chelsea White (Georgia Institute of Technology) Abstract No. 311 *

Understanding Donor Behavior in a Natural Disaster Anyama Okore-Hanson (North Carolina A&T State University), Steven Jiang (North Carolina A&T State University), Lauren Davis (North Carolina A&T State University), Paul Stanfield (North Carolina A&T State University) Abstract No. 815 *

www.iienet.org/annual | 17 17

ISERC Sessions

Track: Quality and Reliability Engineering Session: Condition Based Maintenance and Applications I Chair(s): Zhigang Tian (Concordia University) Time & Place: S1230 Room: Flamboyan

Optimal Maintenance Policies for Dependent Competing Risk Models Qingyu Yang (Wayne State University), Nailong Zhang (Wayne State University) Abstract No. 694 *

System reliability prediction based on component-level prognostics information Zhigang Tian (Concordia University) Abstract No. 900 *

Joint Optimization of Periodic Inspection and Inventory for a k-out-of-n System Erik Bjarnason (University of Toronto), Sharareh Taghipour (Ryerson University), Dragan Banjevic (University of Toronto), Andrew K.S. Jardine (University of Toronto) Abstract No. 1431 *

Track: Computers and Information Systems Session: Medical Simulation and Information Interfaces Chair(s): Geb Thomas (The University of Iowa) Time & Place: S1230 Room: Flamingo A

The Advantage of Instantaneous versus Delayed Feedback in Orthopaedic Simulation Brian Johns (The University of Iowa), Geb Thomas (The University of Iowa), Jenniefer Kho (The University of Iowa), Matthew Karam (The University of Iowa), J. Lawrence Marsh (The University of Iowa), Donald Anderson (The University of Iowa) Abstract No. 651 *

Wireless Sensor Networks for Industrial Engineering Geb Thomas (University of Iowa), Ted Herman (The University of Iowa) Abstract No. 917 *

Design Principles for Small Form Factor Screens – A Surgical Care Case Study Muhammad Alamoud (Wright State University), Subhashini Ganapathy (Wright State University), Mary McCarthy (Wright State University) Abstract No. 71

Track: Computers and Information Systems Session: e-Business and e-Commerce Chair(s): Luis Occeña (University of Missouri) Time & Place: S1230 Room: Flamingo B

Impact of Customers’ Perceptions on the Use of a Smart Phone for Internet Banking Hyun-Shik Yoon (University of Missouri), Luis Occeña (University of Missouri) Abstract No. 210 *

Maintaining Data Integrity in State Managed e-Healthcare Tasha Sirikaya (University of Missouri), Luis Occeña (University of Missouri) Abstract No. 216 *

IBM Global Technology Outlook 2013 Jane Snowdon (IBM T. J. Watson Research Center) Abstract No. 200

Short-Term Stock Price Trend Prediction of an Emerging Market Using Neural Networks Wen Cao (State University of New York at Binghamton ), Ying Han (State University of New York at Binghamton), Sarah Lam (State University of New York at Binghamton) Abstract No. 1168

| Welcome to the IIE Annual Conference & Expo 201318

ISERC Sessions

Track: Manufacturing and Design Session: Design for Manufacturing - I Chair(s): Lourdes A. Medina (University of Puerto Rico at Mayaguez) Time & Place: S1230 Room: Flamingo C

Design Factors for Medical Device Functionality in Developing Countries Ana Gauthier (Auburn University), Giovanni Cruz (University of Puerto Rico at Mayagüez), Lourdes A. Medina (University of Puerto Rico at Mayaguez), Steve Duke (Auburn University) Abstract No. 266

A Novel Approach to Recyclable Component Classification Horng-Fu Chuang (Da-Yeh University), Bill Tseng (The University of Texas at El Paso), Chun-Che Huang (National Chi Nan University), Shan-Ru Yi (National Chi Nan University), Kun-Xian Lin (National Chi Nan University) Abstract No. 547

Track: Modeling and Simulation Session: Multicriteria Simulation Optimization Chair(s): Mauricio Cabrera-Ríos (University of Puerto Rico, Mayaguez Campus) Time & Place: S1230 Room: Flamingo D

An Industrial Application of Simulation-Based Multi-Objective Scheduling Marianella Padilla (Northern Illinois University), JingJing Guo (Northern Illinois University), Reinaldo Moraga (Northern Illinois University) Abstract No. 1444

Multiple criteria analysis of high-throughput biological experiments Jorlys Alvarado (University of Puerto Rico at Mayaguez), Francheska Reyes (University of Puerto Rico, Mayaguez Campues), A. Berenice Rodriguez (University of Puerto Rico Mayaguez Campus), Mauricio Cabrera-Ríos (University of Puerto Rico, Mayaguez Campus), Clara E. Isaza (Universidad Autónoma de Nuevo León) Abstract No. 729

A Metamodel-based Multicriteria Simulation Optimization Method for Injection Molding María G. Villarreal-Marroquín (The Ohio State University), Jose Castro (The Ohio State University), Mauricio Cabrera-Ríos (University of Puerto Rico, Mayaguez Campus) Abstract No. 811

Track: Quality and Reliability Engineering Session: New Methods and Data Analysis in Statistical Process Control Chair(s): Zhiguo Li (IBM T J Watson Research Center) Time & Place: S1230 Room: Guayacan

A Unified Outlier Detection Method for Trace Data Analysis in Semiconductor Manufacturing Zhiguo Li (IBM T J Watson Research Center), Robert Baseman (IBM T J Watson Research Center), Yada Zhu (IBM Research) Abstract No. 1199

Control Charts for Non-normal Data with Supplementary Runs Rules Eduardo Santiago (Minitab, Inc.), Joel Smith (Minitab, Inc.) Abstract No. 46

Track: Supply Chain and Logistics Session: Inventory Optimization and Control - I Chair(s): Noel Perez (Office Depot) Time & Place: S1230 Room: Maguey

Robust Inventory Control Problem Under Lead Time Uncertainty Andreas Thorsen (Pennsylvania State University), Hongcheng Liu (Pennsylvania State University), Tao Yao (Pennsylvania State University) Abstract No. 915

www.iienet.org/annual | 19 19

ISERC Sessions

Modeling the Impact of Improved Forecast Accuracy on Inventory Levels Noel Perez (Office Depot) Abstract No. 1238

Track: Energy Session: Energy System Optimization and Decision Support-I Chair(s): Mengqi Hu (Mississippi State University) Time & Place: S1230 Room: Salon del Mar A

Impact of Renewable Energy on Power System Cost and Reliability Jing Wu (Argonne National Laboratory), Zhi Zhou (Argonne National Laboratory), Audun Botterud (Argonne National Laboratory), Andrew Mills (Lawrence Berkeley National Laboratory), Bri-Mathias Hodge (National Renewable Energy Laboratory), Michael Heaney (National Renewable Energy Laboratory) Abstract No. 681 *

Multi-objective Particle Swarm Optimization for Building Cluster Decentralized Operation Decisions Mengqi Hu (Mississippi State University) Abstract No. 686 *

Optimal Placement of Wind Turbine on Non-Flat Terrain using Cluster Identification and Multi-objective Genetic Algorithm Bill Tseng (The University of Texas at El Paso), Carlos Garcia (The University of Texas at El Paso), Kym Fraser (University of South Australia ), Chun-Che Huang (National Chi Nan University), Johnny C. Ho (Columbus State University), Paras Mandal (The University of Texas at El Paso) Abstract No. 688 *

Track: Human Factors and Ergonomics Session: Driver Distraction and Air Traffic Control Chair(s): Yunchen Huang (Mississippi State University) Time & Place: S1230 Room: Salon del Mar B

Air Traffic Flow Management in a Metroplex Philip Smith (Ohio State University), Mark Evans (Ohio State University), Amy Spencer (Ohio State University), Ken Durham (Ohio State University) Abstract No. 371

Driver’s Attitudes and Behaviors Regarding Voice Activated Texting Technology and Distracted Driving Kaysha Young (Montana State University - Bozeman), Laura Stanley (Montana State University) Abstract No. 600

Dynamic Message Signs, Driver Characteristics, and Speed Reduction Yunchen Huang (Mississippi State University), Lesley Strawderman (Mississippi State University), Teena Garrison (Mississippi State University) Abstract No. 840

Track: Engineering Education Session: Educating IEs for Careers in Healthcare Chair(s): Sharon Johnson (Worcester Polytechnic Institute) Time & Place: S1230 Room: Tropical A

Utilizing Healthcare Environments for Undergraduate IE Projects Philip Kazemersky (University of Tennessee at Chattanooga), Cecelia Wigal (University of Tennessee at Chattanooga ) Abstract No. 1117

Maximizing Benefits of Class Projects for Students and Receiving Organization Rachel Weber (Rady Children's Hospital-San Diego), Abbey Marquette Tadlock (Rady Children's Hospital San Diego), Leonard Perry (University of San Diego) Abstract No. 1206

| Welcome to the IIE Annual Conference & Expo 201320

ISERC Sessions

Preparing Industrial Engineering Students for Careers in Healthcare Sharon Johnson (Worcester Polytechnic Institute) Abstract No. 767 *

Implementing a Meaningful and Successful Internal Performance Improvement Course Abbey Marquette Tadlock (Rady Children's Hospital San Diego), Rachel Weber (Rady Children's Hospital-San Diego) Abstract No. 1234

Track: Engineering Management Session: Team-based Work Systems Chair(s): Pilar Pazos (Old Dominion University) Time & Place: S1230 Room: Tropical B

The Role of Team Preparation Processes and Task Conflict on Virtual Team Performance Pilar Pazos (Old Dominion University), Ana Canto (Instituto Tecnologico de Merida) Abstract No. 278 *

The Role of IS Infrastructure and Organizational Context on the Implementation of Electronic Health Records Systems Pilar Pazos (Old Dominion University), Anjee Gorkhali (Old Dominion University), Rolando Delaguila (Fortis College) Abstract No. 314 *

Virtual Work Model and Global Virtual Teams: Network Organization Roadmap Martha Corrales (EGADE Business School, Tecnologico de Monterrey) Abstract No. 317 *

The Effect of Project Type on Project Team Performance Wen-Hsing Liu (Texas A&M University-Commerce), Jennifer Farris (Texas Tech University) Abstract No. 475 *

Track: Facility Logistics Session: CELDi - Warehouse Design Chair(s): James Noble (University of Missouri) Time & Place: S1230 Room: Tropical C

Using Analytical Models to Assess Performance in Overall Warehouse Design Lisa Thomas (University of Arkansas), Russell Meller (University of Arkansas) Abstract No. 113 *

Using Empirical Data to Assess Performance in Overall Warehouse Design Lisa Thomas (University of Arkansas), Russell Meller (University of Arkansas) Abstract No. 408 *

A Discussion on Warehouse Design Russell Meller (University of Arkansas), Lisa Thomas (University of Arkansas) Abstract No. 409 *

Track: Engineering Economy Session: Analysis of Emerging Technologies Chair(s): Michael Landsberger (University of Central Florida) Time & Place: S200 Room: Ceiba

Emerging Technologies in Healthcare and the Associated Environmental Impacts Sarah Wood (University of Arkansas), Kim Needy (University of Arkansas), Scott Shrake (University of Pittsburgh), Cassie Thiel (University of Pittsburgh), Matthew Huddleston (University of Pittsburgh), Amy Landis (Arizona State University), Noe Copley-Woods (University of Pittsburgh), Melissa Bilec (University of Pittsburgh) Abstract No. 953

www.iienet.org/annual | 21 21

ISERC Sessions

Power Plant Management and Transition Process under CO2 Consideration: A Real Options Approach Chung-Hsiao Wang (LG&E and KU), K. Jo Min (Iowa State University) Abstract No. 327

Does venture capital investment affect firm's innovative performance in different industries? Arsalan Safari (University of Waterloo), Brian Cozzarin (University of Waterloo), Douglas Cumming (York University) Abstract No. 1448

Hybrid Real Options for Emerging Technologies, Green Energy, and Innovation Michael Landsberger (University of Central Florida), Wilawan Onkham (University of Central Florida), Liliana Cruz (University of Central Florida), Luis Rabelo (Department of Industrial Engineering and Management Systems University of Central Florida ), Richard Ajayi (University of Central Florida/School of Business Administration and International Finance), Luis Figueroa (Industrial Engineering and Management Systems Department) Abstract No. 354

Track: Operations Research Session: Transportation Applications of Operations Research 3 Chair(s): Alberto Garcia-Diaz (University of Tennessee) Time & Place: S200 Room: Conf Center A

Discrete Time Dynamic Traffic Assignment Models with Lane Reversals for Evacuation Planning Yeh-Ern Poh (West Virginia University), Qipeng Zheng (West Virginia University), David Martinelli (West Virginia Unversity) Abstract No. 465

Allocation Methodology for Cost-Effective Use of Contractors in Transportation Projects Alberto Garcia-Diaz (University of Tennessee), Mingzhou Jin (The University of Tennessee at Knoxville) Abstract No. 994

Rescheduling of Runway Operations: Development of Heuristic Procedures Gulsah Hancerliogullari (Old Dominion University), Ghaith Rabadi (Old Dominion University) Abstract No. 1018

Track: Operations Research Session: Disaster Response and Public Health Chair(s): Hugh Medal (Mississippi State University) Time & Place: S200 Room: Conf Center B

Online Integrated Network Design and Scheduling Problems with Flexible Release Dates Sarah Nurre (Rensselaer Polytechnic Institute), Thomas Sharkey (Rensselaer Polytechnic Institute) Abstract No. 438 *

Optimal Disaster Relief?: Using the IFRC Code of Conduct to Guide Research John Coles (University at Buffalo), Jun Zhuang (University at Buffalo, SUNY) Abstract No. 439 *

Separating the Inventory Slack Routing Problem Jeffrey Herrmann (University of Maryland) Abstract No. 235

Track: Healthcare Systems Session: Invited Session - Simulation Modeling and Analysis I Chair(s): Kevin Taaffe (Clemson University) Time & Place: S200 Room: Conf Center C

Using Simulation to Improve Communication and Coordination in Perioperative Services Kevin Taaffe (Clemson University), Lawrence Fredendall (Clemson University), Nathan Huynh (University of South Carolina), Gilbert Ritchie (Greenville Hospital System) Abstract No. 259

| Welcome to the IIE Annual Conference & Expo 201322

ISERC Sessions

An Evaluation of Discharge Policies at Acute Care Hospitals Elizabeth Crawford (Wright State University, Dayton, OH), Pratik Parikh (Wright State University), Nan Kong (Purdue University), Charuhas Thakar (University of Cincinnati and Cincinnati VA, OH) Abstract No. 1203

Operating Room Configurations and Policies for Accommodating Elective and Non-elective Surgeries Narges Hosseini (Clemson University), Kevin Taaffe (Clemson University) Abstract No. 1393

Lean and the Bullwhip Effect in Healthcare Service Delivery Tom Rust (Veterans Health Administration) Abstract No. 1454

Track: Healthcare Systems Session: Scheduling I Chair(s): Michael Kuhl (Rochester Institute of Technology) Time & Place: S200 Room: Conf Center D

Adaptive Hospital Bed Allocation Approach under Multiple Uncertainties Jun Zhang (North Dakota State University), Atif Osmani (North Dakota State University), Vinay Gonela (North Dakota State University), Iddrisu Awudu (North Dakota State University) Abstract No. 625

Optimization of Inpatient Hemodialysis Scheduling Considering Efficiency and Treatment Delays Manuel Tolentino Pena (Rochester Institute of Technology), Ruben Proano (Rochester Institute of Technology), Michael Kuhl (Rochester Institute of Technology) Abstract No. 1237

A Hybrid Modeling and Simulation Methodology for Formulating Overbooking Policies Yiling He (University of Central Florida), Muyuan Li (University of Central Florida), Serge Sala-Diakanda (University of Central Florida), Jose Sepulveda (University of Central Florida), Ali Bozorgi (University of Central Florida), Waldemar Karwowski (UCF) Abstract No. 1358

Track: Production Planning and Scheduling Session: Advances in Scheduling and its Applications Chair(s): Xueping Li (The University of Tennessee), Rui Xu (University of Science and Technology of China) Time & Place: S200 Room: Conference 6

Resource consumption minimization of scheduling on serial batch-processing machine Xinle Liang (University of Science and Technology of China), Huaping Chen (University of Science and Technology of China), Rui Xu (University of Science and Technology of China), Xueping Li (The University of Tennessee), Bo Yang (University of Science and Technology of China), Shengchao Zhou (University of Science and Technology of China), Zhongya Li (University of Science and Technology of China) Abstract No. 261 *

Modeling the Clinic Patient scheduling as a Flexible Job-shop Problem: A case study Zhaoxia Zhao (University of Tennessee, Knoxville), Xueping Li (The University of Tennessee), Xiaoyan Zhu (University of Tennessee), Tom Berg (Y-12 National Security Complex), Joseph Wilck (East Carolina University) Abstract No. 648 *

Track: Systems Engineering Session: Model Based Systems Engineering Chair(s): Robert Cloutier (Stevens Institute of Technology) Time & Place: S200 Room: Conference 7

Implementing SysML into a Feasible Systems Engineering Solution Greg Eschbacher (The Boeing Company), Brittany Flaherty (The Boeing Company) Abstract No. 167

www.iienet.org/annual | 23 23

ISERC Sessions

Benefits and Challenges of Model Based Systems Engineering Brittany Flaherty (The Boeing Company), Greg Eschbacher (The Boeing Company) Abstract No. 168

A SysML-Based Semantic Reference Model for Design-to-Production Translation George Thiers (Georgia Tech), Leon McGinnis (Georgia Tech) Abstract No. 1369

Track: Service Systems Session: Energy System Reliability and Infrastructure Expansion Chair(s): Andrew Liu (Purdue University) Time & Place: S200 Room: Conference 8+9

Impact of Demand Response on Thermal Generation Investment with High Wind Penetration Shan Jin (Iowa State University), Audun Botterud (Argonne National Laboratory), Sarah Ryan (Iowa State University) Abstract No. 293 *

Next-Generation Long-Term Planning Model Andrew Liu (Purdue University), Qipeng Zheng (West Virginia University) Abstract No. 294 *

Solving Enhanced Coal Bed Methane Production Planning Problem Using Discretization and Linearization Techniques Anees Rahil (West Virginia University) Abstract No. 388 *

Track: Supply Chain and Logistics Session: Procurement and Distribution Models in Supply Chain Operations Chair(s): Nader Al Theeb (Auburn University) Time & Place: S200 Room: Flamboyan

Truck Scheduling with Flexible Resources at A Cross-dock Facility Dincer Konur (Missouri University of Science and Technology), Mihalis Golias (University of Memphis) Abstract No. 303 *

Recycling Procurement Strategies with Variable Yield Suppliers Paul Rowe (Mississippi State University), Burak Eksioglu (Mississippi State University) Abstract No. 304 *

Post Disaster Integrated Logistic System Nader Al Theeb (Auburn University), Chase Murray (Industrial and Systems Engineering, Auburn University, Auburn, AL, 36849) Abstract No. 544

Track: Computers and Information Systems Session: Big Data and Complex Network Analysis Chair(s): Yi-Shan Sung (Penn State University) Time & Place: S200 Room: Flamingo A

Profiling Real-Time Electricity Consumption Data for Process Monitoring and Control Olufemi Omitaomu (Oak Ridge National Laboratory) Abstract No. 250

Analytic Scheme to Organize Large Archived Data into Hierarchical Affinity Inki Kim (The Pennsylvania State University), Gul Okudan (The Pennsylvania State University) Abstract No. 739

Detecting Overlapping Communities in Online Social Networks Using Game Theoretic Approach Yi-Shan Sung (Penn State University), Soundar Kumara (The Pennsylvania State University) Abstract No. 1194

| Welcome to the IIE Annual Conference & Expo 201324

ISERC Sessions

Track: Emerging Frontiers in IE Research Session: EFIE: Emerging Research Trends in Operations Research Chair(s): Elsayed Elsayed (Rutgers University) Time & Place: S200 Room: Flamingo B

Emerging Research Trends in Operations Research Maged Dessouky (University of Southern California), Onur Dulgeroglu (GE Global Research), Michael Fu (University of Maryland, College Park), Sheldon Jacobson (National Science Foundation), Ravi Ravindran (Penn State University) Abstract No. 1501

Track: Manufacturing and Design Session: Micro/Nanoscale Manufacturing Chair(s): Paul Leu (University of Pittsburgh) Time & Place: S200 Room: Flamingo C

Depth Regulation and Friction Reduction in Ultrasonic Vibration Assisted Nanomachining Li Zhang (North Carolina State University), Jingyan Dong (North Carolina State University), Paul Cohen (NC State University) Abstract No. 762

Characterization of Mechanical properties of Carbon Nanotube reinforced Vessel-like Microfluidic Channels yahui zhang (u of iowa), Ibrahim Tarik Ozbolat (The University of Iowa) Abstract No. 1413

Nanosphere Coatings for Silicon Thin Film Solar Cells Paul Leu (University of Pittsburgh) Abstract No. 1485

Track: Modeling and Simulation Session: Simulation Methods and Applications in Manufacturing, Material Handling, and Logistics Chair(s): Young-Jun Son (The University of Arizona) Time & Place: S200 Room: Flamingo D

Using Renewable Energy to Power Hi-Tech Manufacturing Facilities Jesus Jimenez (Texas State University-San Marcos), Tongdan Jin (Texas State University), Victor Santana-Viera (Texas State University-San Marcos), Francis Mendez (Texas State University-San Marcos), Tyler Huebinger (Texas State University-San Marcos) Abstract No. 207 *

Simulation-based Parallel Direct Search Optimization for Revenue Maximization of Coalmines Sai Srinivas Nageshwaraniyer (The University of Arizona), Young-Jun Son (The University of Arizona), Sean Dessureault (The University of Arizona) Abstract No. 195 *

Logistics Management in Hansaetica Company Using System Dynamics Oscar Mayorga Torres (Universidad Libre), Mirta Yadira Gualteros Tellez (Student), Deivi Estid Cubides Daza (Student) Abstract No. 1438

Track: Quality and Reliability Engineering Session: Effective Fault Management and System Reliability Improvement Chair(s): Qingyu Yang (Wayne State University) Time & Place: S200 Room: Guayacan

Integrated equipment prognostics under varying operating environment Fuqiong Zhao (Concordia University), Zhigang Tian (Concordia University) Abstract No. 485 *

www.iienet.org/annual | 25 25

ISERC Sessions

Managing Operational Availability via Integrated Redundancy Allocation and Spare Parts Provisioning Haitao Liao (University of Arizona), Wei Xie (The University of Arizona), Tongdan Jin (Texas State University) Abstract No. 486 *

Fracture Failure Analysis of DP Steel Using Microstructure Properties Nailong Zhang (Wayne State University), Qingyu Yang (Wayne State University) Abstract No. 1285 *

Track: Supply Chain and Logistics Session: Inventory Optimization and Control - II Chair(s): Jennifer Pazour (Univesity of Central Florida) Time & Place: S200 Room: Maguey

Estimating Inventory Holding and Ordering Costs for Single Item Inventory Models Mohammad Shbool (University of Arkansas), Manuel Rossetti (University of Arkansas), Vijith Varghese (University of Arkansas), Edward Pohl (University of Arkansas) Abstract No. 89

Quantity Discounts and Transshipments in One Supplier, Two Retailer Inventory Systems Gregory Noble (Wright State University), Frank Ciarallo (Wright State University) Abstract No. 1236

Inventory model of cold logistics with sustainability considerations Ali Bozorgi (University of Central Florida), Dima Nazzal (UCF), Jennifer Pazour (Univesity of Central Florida) Abstract No. 1361

Track: Energy Session: Unit Commitment with Uncertainty Chair(s): Sarah Ryan (Iowa State University), Lizhi Wang (Iowa State University) Time & Place: S200 Room: Salon del Mar A

A New Exact Algorithm For Robust Unit Commitment Lizhi Wang (Iowa State University), Bokan Chen (Iowa State University) Abstract No. 582 *

Solving Stochastic Security-Constrained Unit Commitment Problems with Chance Constraints via Decomposition Method Yuping Huang (West Virginia University), Qipeng Zheng (West Virginia University) Abstract No. 335 *

Error Density Estimation and Decomposition for Stochastic Unit Commitment Dinakar Gade (Iowa State University), Sarah Ryan (Iowa State University), Yonghan Feng (Iowa State University) Abstract No. 425 *

An optimization approach to modeling day-ahead electricity demand Yonghan Feng (Iowa State University), Sarah Ryan (Iowa State University), Dinakar Gade (Iowa State University) Abstract No. 334 *

Track: Human Factors and Ergonomics Session: Training and Macroergonomics Chair(s): Laura Stanley (Montana State University) Time & Place: S200 Room: Salon del Mar B

Assessing Physiological Response Validity in Simulated and Real Driving Environments Jessica Mueller (Montana State University), Laura Stanley (Montana State University), Tara Azamian (Cornell University), Daniel Mercer (Portland State University) Abstract No. 587

| Welcome to the IIE Annual Conference & Expo 201326

ISERC Sessions

Track: Engineering Education Session: Panel Discussion: Do's and Don'ts for Your ABET Self-Study and Visit Chair(s): Charlene Yauch (Milwaukee School of Engineering) Time & Place: S200 Room: Tropical A

Panel Discussion: Do’s and Don’ts for Your ABET Self-Study and Visit Charlene Yauch (Milwaukee School of Engineering) Abstract No. 320 *

Track: Engineering Management Session: Enterprise System Design and Operations Chair(s): Sang Won Yoon (State University of New York at Binghamton) Time & Place: S200 Room: Tropical B

Cross-Training Protocols to Enhance Incoming Call Routing Distribution Keith Thompson (State University of New York at Binghamton), Sang Won Yoon (State University of New York at Binghamton), Sarah Lam (State University of New York at Binghamton), Nathan Gnanasambandam (Xerox Research Center) Abstract No. 908 *

Customers' Behavior Prediction Using Artificial Neural Network Bichen Zheng (State University of New York at Binghamton), Keith Thompson (State University of New York at Binghamton), Sarah Lam (State University of New York at Binghamton), Sang Won Yoon (State University of New York at Binghamton), Nathan Gnanasambandam (Xerox Research Center) Abstract No. 909 *

Optimal Shale Gas Field Development Under Uncertainty Honggang Wang (Rutgers University) Abstract No. 942 *

Diffusion of Healthy Behaviors in Social Networks Payam Parsa (University of Arkansas), Xin Chen (Southern Illinois University Edwardsville) Abstract No. 1240 *

Track: Facility Logistics Session: Facility Logistics V - Design Chair(s): John White (University of Arkansas) Time & Place: S200 Room: Tropical C

New Insights Regarding Block Stacking John White (University of Arkansas), Jordan Sonnentag (University of Arkansas), Jessica Matson (Tennessee Tech University) Abstract No. 1462

Integrating Warehouse Design Models and Warehouse Analysis Models Using ModelCenter Sebastian Schmidt (Georgia Tech), Andreas Werner (Georgia Tech), Leon McGinnis (Georgia Tech) Abstract No. 1365

Track: Engineering Economy Session: Education in Engineering Economic Analysis Chair(s): Gillian Nicholls (University of Alabama in Huntsville) Time & Place: S330 Room: Ceiba

Flipped Out Engineering Economy: Converting a Traditional Class to an Inverted Model Jerome Lavelle (North Carolina State University), Matthew Stimpson (North Carolina State University), E. Downy Brill (North Carolina State University) Abstract No. 56

www.iienet.org/annual | 27 27

ISERC Sessions

Using Technology for Teaching Engineering Economy to the Millenial Student Kailash Bafna (Western Michigan University) Abstract No. 253

Assessment of Trans-disciplinary System Integration Extreme Learning at Tsinghua University, China Steve Hsueh-Ming Wang (University of Alaska Anchorage), Benjamin Koo (Tsinghua University), Shi Fei (Tsinghua University), Li-Qian Yeong (Tsinghua University), Tien Fa Hou (Tsinghua University) Abstract No. 1494 *

Using Online Remedial Learning Tools To Aid Engineering Economy Students Gillian Nicholls (University of Alabama in Huntsville) Abstract No. 1241

Track: Operations Research Session: Education Scheduling Chair(s): Rolando Acosta-Amado (Universidad Pontificia Bolivariana Seccional Bucaramanga) Time & Place: S330 Room: Conf Center A

Decision Support Tool for Operations Management Course and Instructor Scheduling Morgan Ulesich (University of Arkansas - Fayetteville) Abstract No. 531

A Mixed-Integer Programming Model for Examination Timetabling Problem Emrah Koksalmis (Turkish Air Force Academy), Christopher Garcia (University of Mary Washington), Ghaith Rabadi (Old Dominion University) Abstract No. 993

An Integer Programming Model For The Academic Timetabling Problem Rolando Acosta-Amado (Universidad Pontificia Bolivariana Seccional Bucaramanga), Marcela Villa Marulanda (Universidad Pontificia Bolivariana) Abstract No. 1322

Track: Operations Research Session: Manufacturing Scheduling and Analysis Chair(s): José Ventura (The Pennsylvania State University ) Time & Place: S330 Room: Conf Center B

Optimum Target Levels for a Network of Processes Walid Al-Zu'bi (King Fahd University of Petroleum and Minerals), Shokri Selim (King Fahd University of Petroleum and Minerals) Abstract No. 30

Particle Swarm Optimization for Scheduling a Fixed Product Open Shop Carlos Parra (The Pennsylvania State University), José Ventura (The Pennsylvania State University ) Abstract No. 407

Condition-Based Harvesting Policies for Biomanufacturing Operations Subject to Batch Failures Tugce Martagan (University of Wisconsin-Madison), Ananth Krishnamurthy (University of Wisconsin-Madison) Abstract No. 421

Earliness-Tardiness Minimization on Scheduling a Batch Processing Machine Zhongya Li (University of Science and Technology of China), Huaping Chen (University of Science and Technology of China), Rui Xu (University of Science and Technology of China), Xueping Li (The University of Tennessee), Xinle Liang (University of Science and Technology of China), Shengchao Zhou (University of Science and Technology of China) Abstract No. 764

| Welcome to the IIE Annual Conference & Expo 201328

ISERC Sessions

Track: Healthcare Systems Session: Simulation Modeling and Analysis II Chair(s): Tom Rust (Veterans Health Administration) Time & Place: S330 Room: Conf Center C

Analyzing Clinical Laboratories using Object-oriented Hierarchies and Discrete-event Simulation Hao Wang (University of Washington), Hao Huang (University of Washington), Joseph Heim (University of Washington), Zelda Zabinsky (University of Washington), Mike Astion (Seattle Children's Hospital), John Childs (Seattle Children's Hospital), Doris Cruz (Seattle Children's Hospital), Quincy Lam (Seattle Children's Hospital), Jack Messner (Seattle Children's Hospital), Victoria Robbe (Seattle Children's Hospital), Joanne Simpson (Seattle Children's Hospital), Lisa Wick (Seattle Children's Hospital), Min Xu (Seattle Children's Hospital) Abstract No. 794

Generic Process Mapping and Simulation Modeling of Inpatient Units in a Medical Center Dusan Sormaz (Ohio University), Ryan Miller (Ohio University) Abstract No. 1372

Simulation Modeling of Hospital Discharge Process Zexian Zeng (Department of Industrial and Systems Engineering, University of Wisconsin, Madison, WI 53706), Xiaolei Xie (University of Wisconsin-Madison), Xiang Zhong (University of Wisconsin Madison), Jingshan Li (University of Wisconsin - Madison), Barbara A. Liegel (University of Wisconsin Hospital and Clinics, Madison, WI 53792), Sue Sanford-Ring (University of Wisconsin Hospital and Clinics, Madison, WI 53792) Abstract No. 1409

Track: Healthcare Systems Session: Facilities and Location Planning Chair(s): A. Joy Rivera-Rodriguez (Clemson University) Time & Place: S330 Room: Conf Center D

Designing Patient Rooms to Facilitate Patient-Centered Care Michelle Jahn (Clemson University), A. Joy Rivera-Rodriguez (Clemson University) Abstract No. 522

Causal Effect Models for the Prediction of Location Dependent Demand for Primary Care Service Houshang Darabi (University of Illinois at Chicago), Ashkan Sharabiani (University of Illinois at Chicago) Abstract No. 875

Track: IE in the Military Session: Protection / Risk Chair(s): Paul Goethals (United States Military Academy) Time & Place: S330 Room: Conference 3

A Prototype Model of Fire Ignition from Ballistic Impacts Matthew Bova (University of Cincinnati), Frank Ciarallo (Wright State University), Raymond Hill (Air Force Institute of Technology) Abstract No. 31 *

Optimal Methods for Interceptor Allocation in a Weapon-Target Assignment Framework Darryl Ahner (The Air Force Institute of Technology), Carl Parson (Air Force Institute of Technology) Abstract No. 35

Modeling Asymmetric Blast Patterns for Weapon Delivery Systems Paul Goethals (United States Military Academy), Gregory Boylan (Clemson University), Byung Rae Cho Abstract No. 23 *

www.iienet.org/annual | 29 29

ISERC Sessions

Track: Social, Environmental and Sustainability Session: Sustainability Metrics and Policy Making Chair(s): Tian Lan (University of Kentucky) Time & Place: S330 Room: Conference 4/5

The Selection and Organization of Sustainability Metrics KIJUNG PARK (The Pennsylvania State University), Gul Okudan (The Pennsylvania State University) Abstract No. 747

Propensity for Pro-Environmental Decisions: Decision-Making Based on Values Kelly Sprehn (Penn State), Gul E. Okudan Kremer (The Pennsylvania State University), David Riley (Penn State) Abstract No. 297

Mathematical Modeling for Platform-based Product Configuration Considering Total Life-cycle Sustainability Tian Lan (University of Kentucky), Fazleena Badurdeen (University of Kentucky) Abstract No. 585

The Sustainability Dynamics of the Familias en Acción Program in Colombia Laura Cleves (Universidad de los Andes) Abstract No. 1222

Track: Production Planning and Scheduling Session: Systems and Methodologies for Supply Chain Management Chair(s): Chase Rainwater (University of Arkansas) Time & Place: S330 Room: Conference 6

Quantity Discount Mechanisms in a Two-Level Supply Chain Jing Ma (University of Florida), Joseph Geunes (University of Florida), Yongpei Guan (University of Florida) Abstract No. 783 *

Dredge Equipment Scheduling with Environmental Windows Ridvan Gedik (University of Arkansas), Heather Nachtmann (University of Arkansas), Edward Pohl (University of Arkansas), Chase Rainwater (University of Arkansas), Kenneth Mitchell (US Army Engineer Research and Development Center) Abstract No. 786 *

Managing Price and Lead Time Decisions for a System with Both Contracted Customers and Spot Purchasers Esma Gel (Arizona State University), Pinar Keskinocak (Georgia Institute of Technology), Baykal Hafizoglu (Arizona State University) Abstract No. 1495 *

Track: Systems Engineering Session: Sociotechnical Systems Chair(s): Robert Cloutier (Stevens Institute of Technology) Time & Place: S330 Room: Conference 7

Framework and Research Issues for Multi-Level Modeling of Socio-Technical Systems Doug Bodner (Georgia Institute of Technology), Bill Rouse (Stevens Institute of Technology) Abstract No. 1252

Economics of Creating Regenerative Skin for Trauma Treatment Stephanie Ellis (North Carolina state university), Katie Basinger (NC State University), Rohan Shirwaiker (NC State University), Ola Harrysson (NCSU), Richard Wysk (North Carolina State University) Abstract No. 1196

Scenario-based approach to improve the Resilience of Interdependent Civil Infrastructures Guisselle Adriana Garcia Llinas (University at Buffalo / Universidad del Norte), Rakesh Nagi (University at Buffalo (SUNY)), Moises Sudit (University at Buffalo) Abstract No. 571

| Welcome to the IIE Annual Conference & Expo 201330

ISERC Sessions

An Object-Oriented Implementation of SCOR Timothy Sprock (The Georgia Institute of Technology), Leon McGinnis (Georgia Tech) Abstract No. 1003

Track: Service Systems Session: Transportation Service Systems Chair(s): Xiaoqing Wang (University of Southern California) Time & Place: S330 Room: Conference 8+9

A Dynamic Railway Seat Allocation Problem Zhixue Xie (Tsinghua University), Wanshan Zhu (Department of Industrial Engineering, Tsinghua University, Beijing, China), Li Zheng (Department of Industrial Engineering, Tsinghua University, Beijing, China) Abstract No. 489

The Effect of Ride Sharing in the Traffic Assignment Problem Huayu Xu (University of Southern California), Fernando Ordonez (Universidad de Chile), Maged Dessouky (University of Southern California) Abstract No. 252

A Pickup and Delivery Problem for Ridesharing Consider Congestion Xiaoqing Wang (University of Southern California), Maged Dessouky (University of Southern California), Fernando Ordonez (Universidad de Chile), Sven Koenig (University of Southern California), Masabumi Furuhata (University of Southern California) Abstract No. 218

Track: Supply Chain and Logistics Session: Procurement and Supplier Selection Chair(s): Jennifer Ryan (Rensselaer Polytechnic Institute) Time & Place: S330 Room: Flamboyan

A Lead Time Reduction Mechanism Mingzhou Jin (The University of Tennessee at Knoxville), Jinglu Song (University of Tennessee) Abstract No. 982

Supplier Selection Model Using Fuzzy Logic and AHP Evrim Yuzgec (State University of New York at Binghamton) Abstract No. 992

Design of Competitive Procurement Processes and the Outsourcing Decision Jennifer Ryan (Rensselaer Polytechnic Institute), Yue Jin (Bell Labs Ireland) Abstract No. 498

Track: Computers and Information Systems Session: Business Analytics Industry Applications Chair(s): Rodolfo Portillo (Kimberly Clark – Latin American Operations ), Victor Valdebenito (Kimberly Clark – Latin American Operations) Time & Place: S330 Room: Flamingo A

Operational impact of Inventory model under market uncertainty conditions Victor Valdebenito (Kimberly Clark – Latin American Operations), Danilo Abril (Kimberly Clark Corporation) Abstract No. 164 *

Collaborative Management of Supply Network Operations Rodrigo Reyes Levalle (Purdue University), Manuel Scavarda (Purdue University), Shimon Nof (Purdue University) Abstract No. 165 *

Direct Shipment Order Process Alignment at a Consumer Goods Company Aixa Cintron (Anonymous) Abstract No. 906 *

www.iienet.org/annual | 31 31

ISERC Sessions

Mathematical Programming approach for DRP model under dynamic demand Victor Valdebenito (Kimberly Clark – Latin American Operations), Danilo Abril (Kimberly Clark Corporation) Abstract No. 1221 *

Track: Emerging Frontiers in IE Research Session: EFIE: Emerging Research Trends in Homeland Security and Emergency Response Chair(s): Gino Lim (University of Houston) Time & Place: S330 Room: Flamingo B

Emerging Research Trends in Homeland Security and Emergency Response Rajan Batta (University at Buffalo (SUNY)), James Luxhoj (Rutgers University), Gregory Parnell (United States Military Academy), William A. Wallace (Rensselaer Polytechnic Institute), Russell Wooten (U. S. Department of Homeland Security) Abstract No. 1497

Track: Manufacturing and Design Session: Biomedical Manufacturing - II Chair(s): Salil Desai (North Carolina A&T State University), Jingyan Dong (North Carolina State University) Time & Place: S330 Room: Flamingo C

A Multi-Material Bioprinting Platform towards Stratified Articular Cartilage Tissue Fabrication Howard Chen (University of Iowa), Ibrahim Tarik Ozbolat (The University of Iowa) Abstract No. 516

Fabrication of Multi-scale Hierarchical Scaffolds Using Thermal Extrusion and Electrohydrodynamic (EHD) Jet Plotting Chuang Wei (North Carolina State University), Jingyan Dong (North Carolina State University) Abstract No. 763

Functionally Gradient Tissue Scaffold Design and Deposition Path Planning for Bio-additive Processes Bahattin Koc (Sabanci University), AKM Khoda (University at Buffalo, SUNY), Ibrahim Tarik Ozbolat (The University of Iowa) Abstract No. 1330

Track: Modeling and Simulation Session: Agent-Based Simulation & Cognitive Modeling Chair(s): Christina Rusnock (University of Central Florida) Time & Place: S330 Room: Flamingo D

Interaction-Based Analytical Framework for Agent-based Simulation Models Victor Wai Kin Chan (Rensselaer Polytechnic Institute) Abstract No. 281

A Conceptual Architecture for Modeling Team Cognition by Haptic Sensors and Agent Based Simulation Cihan Dagli (Missouri University of Science and Technology), Siddhartha Agarwal (Missouri University of Science and technology) Abstract No. 279

Using Discrete-Event Simulation for Cognitive Workload Modeling and System Evaluation Christina Rusnock (University of Central Florida), Christopher Geiger (University of Central Florida) Abstract No. 81

Track: Quality and Reliability Engineering Session: Statistical Process Control for Profile Data Chair(s): Senthil Balaji Girimurugan (Florida State University) Time & Place: S330 Room: Guayacan

Wavelet ANOVA for Detection of Local and Global Profile Changes Senthil Balaji Girimurugan (Florida State University), Eric Chicken (Florida State University), Joseph Pignatiello (Air Force Institute of Technology), Michelle Zeisset (Florida State University) Abstract No. 273

| Welcome to the IIE Annual Conference & Expo 201332

ISERC Sessions

Monitoring complex surface using Gaussian process models Nan Chen (National University of Singapore), Linmiao Zhang (National University of Singapore) Abstract No. 662

Semiparametric Changepoint Monitoring of Profile Data Jordan Cuevas (United States Military Academy), Eric Chicken (Florida State University), Joseph Pignatiello (Air Force Institute of Technology), Senthil Balaji Girimurugan (Florida State University) Abstract No. 551

Multimode geometric profile monitoring with correlated image data Chiwoo Park (Florida State University), Abhishek Shrivastava (City University of Hong Kong) Abstract No. 1086

Track: Supply Chain and Logistics Session: Warehousing and Distribution Chair(s): Aman Gupta (Embry-Riddle Aeronautical University - WorldWide) Time & Place: S330 Room: Maguey

Should Rectilinear distances be used in continuous facility location models? Hector Carlo (University of Puerto Rico - Mayaguez), Alejandro Vigo (University of Puerto Rico - Mayaguez), Keishla Lopez (University of Puerto Rico - Mayaguez) Abstract No. 152 *

Logistics and Distribution Index for Greater Louisville Area Erin Gerber (University of Louisville), Sunderesh Heragu (University of Louisville), Gail DePuy (University of Louisville) Abstract No. 160

A Taxonomy to the Class of Minimum Latency Problems Mohammad Moshref-Javadi (Purdue University), Seokcheon Lee (Purdue University) Abstract No. 324

Extension and Application of a Mathematical Model for Product Allocation and Warehouse Design Aman Gupta (Embry-Riddle Aeronautical University - WorldWide), Sunderesh Heragu (University of Louisville) Abstract No. 65

Track: Energy Session: Energy Systems Modeling Chair(s): Yihsu Chen (University of California MERCED), Sarah Ryan (Iowa State University) Time & Place: S330 Room: Salon del Mar A

Modular Energy-Storage System-Management by Adaptive Echolocation & Game Theory Nicolas Lopez (The University of Texas at El Paso), Jose Francisco Espiritu Nolasco (The University of Texas at El Paso) Abstract No. 1392

Generation Expansion Planning with Wind Power Uncertainties Shan Jin (Iowa State University), Audun Botterud (Argonne National Laboratory), Sarah Ryan (Iowa State University) Abstract No. 931

Energy Efficiency Analysis in Food Supply Chains of US and India Chen Zhou (Georgia Institute of Technology), Harish Babu (Georgia Institute of Technology), Vijayendran Chandramouli (Georgia Institute of Technology), Babafemi Odelowo (Georgia Institute of Technology) Abstract No. 1025

www.iienet.org/annual | 33 33

ISERC Sessions

Track: Human Factors and Ergonomics Session: Human Performance and Workload Chair(s): Lukasz Mazur (University of North Carolina ) Time & Place: S330 Room: Salon del Mar B

Exploring Association Between Mental Workload and Performance in Radiotherapy Planning Lukasz Mazur (University of North Carolina ), Prithima Mosaly (University of North Carolina), Bhisham Chera (University of North Carolina), Marks Lawrence (University of North Carolina) Abstract No. 130

Human Total Ownership Cost framework Based On Universal Human Performance Cost Components Tareq Ahram (University of Central Florida), Waldemar Karwowski (UCF) Abstract No. 612

Patient safety culture, fatigue and sleepiness: a data mining approach Shaghayegh Parhizi (University of Missouri-Columbia), Linsey Steege (University of Missouri-Columbia), Kalyan Pasupathy (Assistant Professor, Health Management & Informatics, MU Informatics Institute ) Abstract No. 679

Neural Correlates of Cognitive Task Performance During Orthostatic Challenge Jason Sterkenburg (Michigan Technological University), Ashley Shortz (Michigan Technological University), Ranjana Mehta (Texas A&M Health Science Center) Abstract No. 1300

Track: Engineering Education Session: Modeling and Problem Solving Techniques Chair(s): Jeffrey Herrmann (University of Maryland) Time & Place: S330 Room: Tropical A

A Problem Based Learning Framework to Teaching Linear Programming Heriberto Garcia-Reyes (Tecnologico de Monterrey), Cesia Lorena De la Garza (Tecnologico de Monterrey) Abstract No. 1061

Spreadsheet Modeling Exercises for Engineering Students to Learn End-user Modeling Jeffrey Herrmann (University of Maryland) Abstract No. 88

Understanding the Visualization Strategies used by Experts When Reading Mechanical Part Drawings using Eye Tracking Siddhartha Nambiar (Indian Institute of Technology, Guwahati), Kapil Chalil Madathil (Clemson University), Melissa Dorlette Paul (Clemson University), Melissa Zelaya (Clemson University), Reshmi Koikkara (Clemson University), Anand Gramopadhye (Clemson University) Abstract No. 27

Track: Engineering Management Session: Featured Session: Introductory Lean Six Sigma Curriculum Chair(s): Jennifer Farris (Texas Tech University) Time & Place: S330 Room: Tropical B

The LAI Lean Academy Experience: Introductory Lean Six Sigma Curriculum Earll Murman (Massachusetts Institute of Technology), Hugh McManus (Metis Design, Inc), Annalisa Weigel (MIT) Abstract No. 698

| Welcome to the IIE Annual Conference & Expo 201334

ISERC Sessions

Track: Engineering Management Session: Engineering Management in Quality Chair(s): Elizabeth Cudney (Missouri S&T) Time & Place: S330 Room: Tropical C

Predicting Faults in Heavy Duty Vehicles Using the Mahalanobis-Taguchi Strategy Adebolaji Jobi-Taiwo (Missouri University of Science and Technology), Elizabeth Cudney (Missouri S&T) Abstract No. 691

A Review of the Current Literature in Inspection Sampling Optimization Zlatan Hamzic (Missouri S&T), Elizabeth Cudney (Missouri S&T), Ruwen Qin (Missouri University of Science and Technology) Abstract No. 707

Emperical Assessment of the MBNQA Model Sampson Gholston (The University of Alabama in Huntsville), Jonathan Hill (UAHuntsville), Mark Antonison (AI Signal Research Inc.) Abstract No. 1292

Track: Engineering Economy Session: 2012 Wellington Award Lecture Chair(s): Joseph Hartman (University of Florida) Time & Place: S500 Room: Ceiba

Wellington Lecture: Problems of Interest for Engineering Economists Joseph Hartman (University of Florida) Abstract No. 918 *

Track: Operations Research Session: Operations Research Division Town Hall Meeting Chair(s): Time & Place: S500 Room: Conf Center A

Track: Healthcare Systems Session: Optimization Chair(s): Jordan Peck (Veterans Health Administration) Time & Place: S500 Room: Conf Center B

Outcome and State Transition Modeling for Adaptive Interdisciplinary Pain Management Aera LeBoulluec (University of Texas at Arlington), Li Zeng (The University of Texas at Arlington), Victoria Chen (University of Texas at Arlington), Jay Rosenberger (The University of Texas Arlington), Robert Gatchel (University of Texas at Arlington) Abstract No. 557

Fuzzy-based Facilities Design Problem for Satellite Location and Optimization Configuration Celestine Aguwa (Wayne State University), Leslie Monplaisir (Wayne State University) Abstract No. 635

Optimization model for highly specialized healthcare services demand allocating Rodolfo Mendoza Gómez (Instituto Tecnológico y de Estudios Superiores de Monterrey), Karla Valenzuela (ITESM CAMPUS TOLUCA) Abstract No. 1137

Optimizing a Healthcare Clinic using Real-Time Location System and Simulation Xueping Li (The University of Tennessee), Cong Guo (University of Tennessee), Colby Mattie (University of Tennessee), Tom Berg (Y-12 National Security Complex), Joseph Wilck (East Carolina University) Abstract No. 466

www.iienet.org/annual | 35 35

ISERC Sessions

Track: Healthcare Systems Session: Emerging Healthcare Topics Chair(s): William Schell (Montana State University - Bozeman) Time & Place: S500 Room: Conf Center C

Performance Dashboard for Management of Diabetes in Primary Care Magaly Ramirez (University of Southern California), Shinyi Wu (University of Southern California) Abstract No. 1113

A Quantitative Approach Towards the Selection of Medical Tourism Destinations William Hamel (Montana State University - Bozeman), William Schell (Montana State University - Bozeman), Viviana Cesani (University of Puerto Rico) Abstract No. 470

Application of Serious Games in Ankle-Foot Orthotic Rehabilitation Zongliang Jiang (North Carolina A&T State University), Davorin Stajsic (North Carolina A&T State University) Abstract No. 1047

An Integer Programming Model for Home Visitation Deployment Rolando Acosta-Amado (Universidad Pontificia Bolivariana Seccional Bucaramanga), Isaac Atuahene (University Of Tennessee), Rupy Sawhney (The University of Tennessee) Abstract No. 1303

Track: Healthcare Systems Session: Scheduling II Chair(s): Mark Lawley (Purdue University) Time & Place: S500 Room: Conf Center D

Designing effective and efficient scheduling policy to improve laboratory performance Vinay Gonela (North Dakota State University), Vinay Gonela (North Dakota State University), Jun Zhang (North Dakota State University), Atif Osmani (North Dakota State University), Iddrisu Awudu (North Dakota State University), Kambiz Farahmand (North Dakota State University), Jing Shi (North Dakota State University) Abstract No. 637

Simulation Study of Patient Flow in Mohs Micrographic Surgery Clinics Stephen Steidle (Purdue University), Mark Lawley (Purdue University), Seokcheon Lee (Purdue University) Abstract No. 714

Track: IE in the Military Session: Sensors, Signal Processing Chair(s): Ashok Deb (United States Military Academy) Time & Place: S500 Room: Conference 3

Using Condition-Based Maintenance Analysis to Support Army Supply Decisions John Dulin (Concurrent Technologies Corporation) Abstract No. 13

Sequential Monte Carlo-based Radar Tracking in the Presence of Sea-Surface Multipath Xiaoran Shi (The University of Miami), Nurcin Celik (University of Miami) Abstract No. 1095

Wireless Personal Area Network for the Warfighter Ashok Deb (United States Military Academy) Abstract No. 1453

| Welcome to the IIE Annual Conference & Expo 201336

ISERC Sessions

Track: Production Planning and Scheduling Session: Production Planning and Scheduling 5 Chair(s): Huaping Chen (University of Science and Technology of China) Time & Place: S500 Room: Conference 6

Selling Finite Capacity Amit Eynan (University of Richmond), Chakravarthi Narasimhan (Washington University) Abstract No. 780

Makespan Minimization on a Single Batch Processing Machine Shengchao Zhou (University of Science and Technology of China), Huaping Chen (University of Science and Technology of China), Rui Xu (University of Science and Technology of China), Xueping Li (The University of Tennessee), Xinle Liang (University of Science and Technology of China), Zhongya Li (University of Science and Technology of China) Abstract No. 802

Predicting Work Load and Efficiency During Light Assembly Workstation Design Michael Greig (Ryerson University), Judy Village (Ryerson University), Filippo Salustri (Ryerson University), Patrick Neumann (Ryerson University) Abstract No. 1282

Track: Service Systems Session: Resource Allocation in Health Care Chair(s): Maria Mayorga (Clemson University) Time & Place: S500 Room: Conference 8+9

Scheduling Outpatient Appointment When Considering the Cancellation and No-shows Zhaoxia Zhao (University of Tennessee, Knoxville), Xiaoyan Zhu (University of Tennessee), Xueping Li (The University of Tennessee) Abstract No. 103 *

Location and Dispatching of Ambulances with Fairness Considerations Hector Toro Diaz (Clemson University), Maria Mayorga (Clemson University), Laura Mclay (Virginia Commonwealth University) Abstract No. 329 *

Optimal Control of an Emergency Room Triage and Treatment Process Gabriel Zayas-Caban (Cornell University), Mark Lewis (Cornell University) Abstract No. 573 *

Track: Quality and Reliability Engineering Session: Statistical Analysis in Advanced Manufacturing Chair(s): Namhun Kim (Ulsan National Institute of Science and Technology) Time & Place: S500 Room: Flamboyan

A product quality monitoring framework using SVM-based production data analysis in online shop floor controls ARM YOO (UNIST), YeongGwang Oh (Unist), Haeseung Park (UNIST), Namhun Kim (Ulsan National Institute of Science and Technology), Dongchel Kim (ITstar), Younghak Kim (ITstar) Abstract No. 615

A General Framework for Predictive Wafer Quality Classification Chun-An Chou (SUNY Binghamton), Yada Zhu (IBM Research) Abstract No. 1283

www.iienet.org/annual | 37 37

ISERC Sessions

Track: Tutorials Session: ISE Research in Disaster Logistics Chair(s): Gino Lim (University of Houston) Time & Place: S500 Room: Flamingo B

Review of Recent Developments in ISE Research in Disaster Logistics Rajan Batta (University at Buffalo (SUNY)), Gina Galindo Pacheco (Universidad del Norte) Abstract No. 640

Track: Manufacturing and Design Session: Design for Manufacturing - II Chair(s): Christopher Geiger (University of Central Florida) Time & Place: S500 Room: Flamingo C

Developing Design Complexity Metrics for Medical Device Development Lourdes A. Medina (University of Puerto Rico at Mayaguez), Maricarmen Collet (University of Puerto Rico at Mayagüez), Giovanni Cruz (University of Puerto Rico at Mayagüez), Tamarys Pacheco (University of Puerto Rico at Mayagüez), Gul E. Okudan Kremer (The Pennsylvania State University) Abstract No. 777

Design Optimization of Gas Turbine Blade Internal Cooling Channels Christopher Geiger (University of Central Florida), Narasimha Nagaiah (University of Central Florida) Abstract No. 1259

Predicting Uncertainty in Surface Geometry John Jackman (Iowa State University), Stephen Vardeman (Iowa State University) Abstract No. 1089

Track: Modeling and Simulation Session: Social Network & Manpower Management Chair(s): Tareq Ahram (University of Central Florida) Time & Place: S500 Room: Flamingo D

The Diffusion of a Petition in a Social Network Oscar Herrera Restrepo (Virginia Polytechnic Institute and State University -Virginia Tech), Hui Zhang (PhD. Student, Virginia Tech), Armin Ashoury (PhD. Student, Virginia Tech), Hazhir Rahmandad (Virginia Polytechnic Institute and State University) Abstract No. 450

Big Data Analytics - Sentiment Analysis of Twitter Data using Clustering Techniques Kenneth Hutchison (Pennsylvania State University), Soundar Kumara (The Pennsylvania State University) Abstract No. 822

Complex Systems Engineering for Rapid Computational Socio-Cultural Network Analysis and Decision Support Systems Tareq Ahram (University of Central Florida), Waldemar Karwowski (UCF) Abstract No. 614

Track: Quality and Reliability Engineering Session: Performance Measure and Maintenance Decision Making Chair(s): Farnoosh Naderkhani Zarrin Ghabaei (University of Toronto) Time & Place: S500 Room: Guayacan

Parameter Estimation of Hidden Semi-Markov Model in Partially Observable System Akram Khaleghei Ghosheh Balagh (University of Toronto), Farnoosh Naderkhani Zarrin Ghabaei (University of Toronto), Viliam Makis (University of Toronto) Abstract No. 432

| Welcome to the IIE Annual Conference & Expo 201338

ISERC Sessions

Maintenance, Repair, and Overhaul Inventory Decision Making for Multi-Component Systems Tiara Chapel (University of Oklahoma), Kash Barker (University of Oklahoma) Abstract No. 474

An Equivalent Age Model for Opportunistic Maintenance Ali Aldubaisi (Auburn University), Soroor Alkhafaji (Auburn University, Industrial and Systems Engineering Department), Fadel Megahed (Auburn University) Abstract No. 509

Analysis and Design Decision Process for Multi-state Systems Carlos Solorio Magaña (CETYS Universidad), Kailash Kapur (University of Washington) Abstract No. 1299

Track: Energy Session: Topics on Performance and Reliability of Renewable Energy Technologies Chair(s): Wilkistar Otieno (University of Wisconsin Milwaukee) Time & Place: S500 Room: Salon del Mar A

Comparative Investigation of Solar Module Performance for the Midwest Market Lisa Bosman (University of Wisconsin-Milwaukee), Wilkistar Otieno (University of Wisconsin Milwaukee) Abstract No. 677 *

A Reinforcement Learning Based Optimization of Maintenance of Wind Energy Conversion Systems Thomas Omwando (University of Wisconsin-Milwaukee), Wilkistar Otieno (University of Wisconsin Milwaukee) Abstract No. 678 *

A Research on Solar Power Purchasing Agreements for Small Business Hector Baez-Fernandez (University of Puerto Rico at Mayaguez), Mayra Méndez-Piñero (Univeristy of Puerto Rico) Abstract No. 880

Track: Human Factors and Ergonomics Session: Human Systems Analysis Chair(s): Adam Piper (South Dakota School of Mines & Technology) Time & Place: S500 Room: Salon del Mar B

Back muscle flexion relaxation phenomenon under uneven ground conditions Boyi Hu (West Virginia University), Ashish Nimbarte (West Virginia University), Xiaopeng Ning (West Virginia University) Abstract No. 581

The Human Error Analysis For Accident Investigation: A Model Accident Investigation MD WALIULLAH (Montana State University) Abstract No. 619

Determining Warning Symbol Configuration for Simultaneous Evaluation Using Eye Tracking Michelle Kringen (South Dakota School of Mines and Technology), Adam Piper (South Dakota School of Mines & Technology) Abstract No. 1188

Using Digital Human Modeling to Enhance Work Visibility for Excavator Joseph Akyeampong (North Carolina A&T State University), Lashawn Nevins (North Carolina A&T State University), Silvanus Udoka (North Carolina A&T State University) Abstract No. 669

www.iienet.org/annual | 39 39

ISERC Sessions

Track: Engineering Education Session: Undergraduate Curriculum Improvement Chair(s): Bradley Chase (University of San Diego) Time & Place: S500 Room: Tropical A

Rethinking the Industrial Engineering Curriculum: Incorporating a Systems Engineering Perspective Georgia-Ann Klutke (Texas A&M University), César Malavé (Texas A&M University) Abstract No. 1021

An Interdisciplinary Approach to Improving Outcomes Within ABET’s Accreditation Guidelines David Koonce (Ohio University), Dyah Hening (Ohio University) Abstract No. 666

Should Industrial Engineering Programs Offer a Six Sigma Certification? Bradley Chase (University of San Diego), Leonard Perry (University of San Diego) Abstract No. 838 *

Track: Engineering Management Session: Action Research Applications in Engineering Management Chair(s): Craig Downing (Rose-Hulman Institute of Technology), Suzanna Long (Missouri University of Science and Technology) Time & Place: S500 Room: Tropical B

A Framework for Improving Roadway Work Zone Safety Using Action Research Ean-Harn Ng (Oregon State University), Suzanna Long (Missouri University of Science and Technology), Brian Smith (Missouri University of Science & Technology), Carlos Sun (University of Missouri) Abstract No. 51 *

Partnering for Solutions: Applied Research in Engineering Management Craig Downing (Rose-Hulman Institute of Technology) Abstract No. 52 *

Transition-Phase Management Model as an Action Research Tool for Healthcare Managers Javier Calvo-Amodio (Oregon State University) Abstract No. 53 *

Track: Engineering Management Session: Special Topics in Engineering Management - 1 Chair(s): Alexandra Medina-Borja (University of Puerto Rico at Mayaguez) Time & Place: S500 Room: Tropical C

NSF's Directorate for Engineering Evaluation and Assessment System Alexandra Medina-Borja (University of Puerto Rico at Mayaguez) Abstract No. 645 *

Proposed Maturity Assessment Framework for a Research Field Heather Keathley (Virginia Polytechnic Institute and State University), Fernando Deschamps (Pontifical Catholic University of Parana), Luciana R. Leite (Federal University of Sao Carlos), Fernando Gonzalez Aleu (Virginia Tech), Pablo Felipe Cardenas Orlandini (Virginia Tech), Eileen Van Aken (Virginia Tech) Abstract No. 1110

A Visualization Technique for Room Scheduling Decision Making John Donnelly (Stevens), Corey Favarolo (Stevens), Eric Yang (Stevens), Jose Ramirez-Marquez (Stevens Institute of Technology) Abstract No. 1476

| Welcome to the IIE Annual Conference & Expo 201340

ISERC Sessions

Track: Engineering Economy Session: Transportation & Sustainability in Engineering Economy Chair(s): Andrea Graham (University of Texas at Arlington) Time & Place: M800 Room: Ceiba

The Impact of Carbon Policies on Freight Movement Mingzhou Jin (The University of Tennessee at Knoxville), Nelson Granda-Marulanda (University of Tennessee), Alberto Garcia-Diaz (University of Tennessee) Abstract No. 979

An Economic Impact Study of the Inland Waterways Furkan Oztanriseven (University of Arkansas), Heather Nachtmann (University of Arkansas) Abstract No. 754

Health Risk Analysis of Adapting Plasma Gasification Process for Solid Waste Management Steve Hsueh-Ming Wang (University of Alaska Anchorage), Cheyenne Alabazas (University of Alaska Anchorage) Abstract No. 1474 *

Assessing Life Cycle Sustainability in Engineering Economics Andrea Graham (University of Texas at Arlington), Jamie Rogers (University of Texas at Arlington), Melanie Sattler (University of Texas at Arlington) Abstract No. 846

Scenario Analysis Evaluating the Sustainability Impacts of Freight Transportation Networks Andrea Graham (University of Texas at Arlington), Jamie Rogers (University of Texas at Arlington) Abstract No. 1035

Track: Operations Research Session: Workforce Scheduling Chair(s): Scott Grasman (Rochester Institute of Technology) Time & Place: M800 Room: Conf Center A

Workforce Planning and Facility Utilization using Two-Stage Stochastic Recourse Anirudha Kulkarni (Rochester Institute of Technology ), Scott Grasman (Rochester Institute of Technology), Shrikant Jarugumilli (BNSF Railway Company), Naiping Keng (Intel Corporation) Abstract No. 497

Programming of agents in a contact center Diego José Gómez Montoya (U. Manuela Beltrán) Abstract No. 805

Granularity of Worksharing in Production Lines under DLB Mechanism Salah Kasmo (Tokyo Institute of Technology), Takao Enkawa (Tokyo Institute of Technology), Sadami Suzuki (Tokyo Institute of Technology) Abstract No. 1070

Track: Healthcare Systems Session: Operating Rooms Chair(s): David Claudio (Montana State University) Time & Place: M800 Room: Conf Center B

Estimation of the Probability of Surgery Lists Over and Under-run Jihan Wang (Wayne State University), Kai Yang (Wayne State Univeristy) Abstract No. 63

A Flexible Cleaning SOP for the Operating Room Virginia Cosgriff (Mayo Clinic Health System - Franciscan Healthcare), David Claudio (Montana State University) Abstract No. 801

www.iienet.org/annual | 41 41

ISERC Sessions

A Genetic Algorithm for Scheduling Elective Surgeries to Operating Rooms Ergin Erdem (North Dakota State University), Jing Shi (North Dakota State University), Xiuli Qu (North Carolina A&T State University) Abstract No. 1244

Track: Healthcare Systems Session: Data Mining Approaches and Techniques Chair(s): Monica Puertas (USF) Time & Place: M800 Room: Conf Center C

Analysis of Low Risk Obstetrics Patients Workflow through Process Mining Houshang Darabi (University of Illinois at Chicago), Ashkan Sharabiani (University of Illinois at Chicago) Abstract No. 874

Data Mining Approach Using Hemodynamic Parameters Monica Puertas (USF), Jose Luis Zayas-Castro (USF), Peter Fabri Abstract No. 927

Neural Networks, Bayesian Networks, and Logistic Regression for ESI Prediction Seifu Chonde (Pennsylvania State University), David Nembhard (Pennsylvania State University), Gul E. Okudan Kremer (The Pennsylvania State University), Omar Ashour (The Pennsylvania State University ) Abstract No. 649

Track: Healthcare Systems Session: Scheduling III Chair(s): Laquanda Leaven (North Carolina A&T State University), Laquanda Leaven (North Carolina A&T State University) Time & Place: M800 Room: Conf Center D

Predicting Blood Collections using Generalized Linear Modeling for Phlebotomist Scheduling Laquanda Leaven (North Carolina A&T State University), Xiuli Qu (North Carolina A&T State University) Abstract No. 1032

Optimal Scheduling Approach to Minimize Resource Conflict in Audiology Clinics Atif Osmani (North Dakota State University), Jun Zhang (North Dakota State University), Iddrisu Awudu (North Dakota State University), Vinay Gonela (North Dakota State University) Abstract No. 626

A Clinic Scheduling Optimization Model Considering Open Access and Walk-in Patients Yidong Peng (North Dakota State University), Jing Shi (North Dakota State University), Xiuli Qu (North Carolina A&T State University) Abstract No. 636

Decision tool to decide best scheduling system for clinic setting Vinay Gonela (North Dakota State University), Vinay Gonela (North Dakota State University), Jun Zhang (North Dakota State University), Iddrisu Awudu (North Dakota State University), Atif Osmani (North Dakota State University) Abstract No. 639

Track: Homeland Security Session: Information Fusion Chair(s): Moises Sudit (University at Buffalo/CUBRC) Time & Place: M800 Room: Conference 3

Fusion of a Set of Attributed Graphs for Event Reconstruction Michael Stearns (University at Buffalo (SUNY)), Alexander Nikolaev (University at Buffalo (SUNY)), Sue Kase (Army Research Laboratory), Kirk Ogaard (Army Research Laboratory) Abstract No. 378 *

| Welcome to the IIE Annual Conference & Expo 201342

ISERC Sessions

Improving Border Security by Coordinating Resources using Multi-Perspective Optimization Hector Ortiz-Pena (CUBRC), Michael Hirsch (Raytheon Company), Mark Karwan (University at Buffalo), Rakesh Nagi (University at Buffalo (SUNY)), Moises Sudit (University at Buffalo/CUBRC) Abstract No. 379 *

Approximate SPARQL for Error Tolerant Queries Gregory Tauer (CUBRC), Ronald Rudnicki (CUBRC), Moises Sudit (University at Buffalo/CUBRC) Abstract No. 380 *

Information Fusion and Intelligence Analysis with Hard and Soft Data: Industrial and Systems Engineering Challenges and Opportunities Rakesh Nagi (University at Buffalo (SUNY)) Abstract No. 424 *

Track: Homeland Security Session: Border Security Optimization Models Chair(s): Heidi Taboada Jimenez (The University of Texas at El Paso) Time & Place: M800 Room: Conference 4/5

Border Security Related Resource Optimization and Simulation Hua Li (Texas A&M University-Kingsville), Qing Song (Texas A&M University-Kingsville), Ning Meng (Texas A&M University-Kingsville), Kai Jin (Texas A&M University-Kingsville) Abstract No. 504 *

An Evolutionary-Game Theory Method for Intelligent Patrolling Considering Randomized Strategies Oswaldo Aguirre (The University of Texas at El Paso), Heidi Taboada Jimenez (The University of Texas at El Paso) Abstract No. 1157 *

On Coxian Phased Distributions to Approximate the Border Crossing Port of Entry (POE) Hiram Moya (Texas A&M University), Guy L. Curry (Texas A&M University) Abstract No. 1158 *

Track: Production Planning and Scheduling Session: Production Scheduling and Lot Sizing Chair(s): Umar Al-Turki (King Fahd University of Petroleum & Minerals) Time & Place: M800 Room: Conference 6

Single Machine Scheduling with Uncertain Processing Times Umar Al-Turki (King Fahd University of Petroleum & Minerals), Khalid Al-Shareef (King Fahd University) Abstract No. 855

Single machine early-tardy scheduling with distinct due dates Umar Al-Turki (King Fahd University of Petroleum & Minerals), Maher Khader (KFUPM), Chawki Fedji (KFUPM) Abstract No. 856

Integrated planning of air transportation and production for time-sensitive goods Farshid Azadian (Embry Riddle Aeronautical University), Alper Murat (Wayne State University), Ratna Chinnam (Wayne State University) Abstract No. 1320

Track: Work Systems Session: Work Systems Tutorials I Chair(s): Miguel González (The University of Texas - Pan American) Time & Place: M800 Room: Conference 7

A Tutorial on Predetermined Motion Time Systems in Work Measurement - Past, Present, and Future. Miguel González (The University of Texas - Pan American) Abstract No. 701

www.iienet.org/annual | 43 43

ISERC Sessions

Human Error, Safety, and Usability in Workplace: Theory and Application Dongjoon Kong (The Boeing Company), Paul Marshall (The Boeing Company) Abstract No. 824

Track: Service Systems Session: Chronic Disease Medical Decision Making Chair(s): Kuang-Hao Buch (North Carolina State University) Time & Place: M800 Room: Conference 8+9

Cost Evaluation of Mammography Screening Policies Considering Imperfect Adherence Mahboubeh Madadi (university of Arkansas), Shengfan Zhang (University of Arkansas) Abstract No. 234 *

Imputing Rewards to Time-Dependent Breast Cancer Screening Using POMDPs Kuang-Hao Buch (North Carolina State University), Julie Simmons Ivy (North Carolina State University), James Wilson (NC State University) Abstract No. 236 *

Evaluation of Competing Surveillance Guidelines for Secondary Renal Cell Carcinoma Jennifer Mason (University of Virginia), Tracey Krupski (University of Virginia) Abstract No. 238 *

Reducing the overall prevalence of diabetes among US women by targeting gestational diabetes Maria Mayorga (Clemson University), Kelly Hunt (Medical University of South Carolina) Abstract No. 263 *

Track: Quality and Reliability Engineering Session: Condition Based Maintenance and Applications II Chair(s): Zhigang Tian (Concordia University) Time & Place: M800 Room: Flamboyan

Inspection optimization model for a k-out-of-n load-sharing system with dependent components Maryam L Kassaei (Ryerson university), Sharareh Taghipour (Ryerson University) Abstract No. 702 *

Condition Based Maintenance using Inverse Gaussian Process Nan Chen (National University of Singapore) Abstract No. 712 *

Monitoring and Predicting Interactions Between the Components of Networked Systems Linkan Bian (Georgia Institute of Technology), Nagi Gebraeel (Georgia Institute of Technology) Abstract No. 452

Track: Computers and Information Systems Session: Intelligent Engineering Systems I Chair(s): Hoo Sang Ko (Southern Illinois University Edwardsville) Time & Place: M800 Room: Flamingo A

A Reverse Logistics Model for Medical Waste Management Sasan Hejrani (Southern Illinois University Edwardsville), Hoo Sang Ko (Southern Illinois University Edwardsville) Abstract No. 44 *

Dynamic Coalition Reformation for Adaptive Demand and Capacity Sharing Hyesung Seok (Purdue University), Shimon Nof (Purdue University) Abstract No. 45 *

| Welcome to the IIE Annual Conference & Expo 201344

ISERC Sessions

Collaborative Partner Selection Protocols in a Heterogeneous Enterprise Network Benjamin Schleich (State University of New York at Binghamton), Sang Won Yoon (State University of New York at Binghamton) Abstract No. 162 *

Track: Tutorials Session: Stochastic Programming Chair(s): Gino Lim (University of Houston) Time & Place: M800 Room: Flamingo B

Monte Carlo Sampling-Based Methods in Stochastic Programming Guzin Bayraksan (The Ohio State University) Abstract No. 969

Track: Manufacturing and Design Session: Materials Processing and Manufacturing Chair(s): Guha Prasanna Manogharan (North Carolina State University) Time & Place: M800 Room: Flamingo C

Hybrid Manufacturing: Challenges and Significance of Integrating Additive and Subtractive Manufacturing Guha Prasanna Manogharan (North Carolina State University), Richard Wysk (North Carolina State University), Ola Harrysson (NCSU) Abstract No. 732

An Air Flow Control System Using Fuzzy Logic Azmi Alazzam (State University of New York at Binghamton), Evrim Yuzgec (State University of New York at Binghamton), Harold Lewis (Binghamton University) Abstract No. 967

Track: Modeling and Simulation Session: Simulation Modeling and Analysis I Chair(s): Dahai Liu (Embry-Riddle Aeronautical University) Time & Place: M800 Room: Flamingo D

Hierarchical Distributed Simulation Modeling of Space Missions John Pastrana (University of Central Florida), Sayli Bhide (University of Central Florida), Oloruntomi Joledo (University of Central Florida), Yanshen Zhu (University of Central Florida), Luis Rabelo (Department of Industrial Engineering and Management Systems University of Central Florida ), Mario Marin (University of Central Florida), Serge Sala-Diakanda (University of Central Florida) Abstract No. 417

Determining Kanban Size Using Discrete Event Simulation for Production Process with Large Variability Dahai Liu (Embry-Riddle Aeronautical University), Abigail Gaston (Embry-Riddle Aeronautical University), Massoud Bazargan (Embry-Riddle Aeronautical University), Jason Kring (Embry-Riddle Aeronautical University), Dennis Vincenzi (Embry-Riddle Aeronautical University), Michael Fitzgerald (Embry-Riddle Aeronautical University) Abstract No. 203

Track: Quality and Reliability Engineering Session: Health Management and Integrated Production Planning Chair(s): Pingfeng Wang (Wichita State University) Time & Place: M800 Room: Guayacan

Modeling of Solar Panel Efficiency under Dynamic Environmental Conditions Xiao Liu (IBM Research Collaboratory Singapore), Lik Sim (Qatar University) Abstract No. 806

A generic model-free approach for lithium-ion battery health management Guangxing Bai (Wichita State University), Pingfeng Wang (Wichita State University) Abstract No. 899

www.iienet.org/annual | 45 45

ISERC Sessions

An Integrated Energy efficient Maintenance planning and Production Scheduling Model Farnaz Ghazi Nezami (Wichita State University), M. Bayram Yildirim (Wichita State University) Abstract No. 658

Multi-Objective Integrated Production Planning and Preventive Maintenance Scheduling Kamran Moghaddam (Southern Polytechnic State University), Pranita Saraswatula (Southern Polytechnic State University) Abstract No. 790

Track: Lean Systems Session: Lean Best Practice Award Chair(s): MD Sarder (University of Southern Mississippi) Time & Place: M800 Room: Maguey

Lean Manufacturing Practices for Operational Excellence in the Apparel Industry Hemantha Perera (MAS Linea Aqua (Pvt) Ltd) Abstract No. 1504 *

Pharmacy Go Lean: An Initiative in Lean Culture Parviz Kheirkhah (University of Texas, MD Anderson Cancer Center), Lucy Moyer (University of Texas, MD Anderson Cancer Center), Miguel Lozano (University of Texas, MD Anderson Cancer Center), Dalia Sumaida (University of Texas, MD Anderson Cancer Center), Laura Burke (University of Texas, MD Anderson Cancer Center) Abstract No. 1505 *

Implementing Lean Supplier Pull Systems via Supplier Portal Julie Sisson (UCF and Harris RF), Joe Giorgianni (Harris Corporation) Abstract No. 1506 *

Lead Time reduction for “Support Service Group Customer Metrics report” Vikash Ranjan (Tata Consultancy Services) Abstract No. 1507 *

Track: Energy Session: Smart Grid Modeling-I Chair(s): Seyedamirabbas Mousavian (Auburn University) Time & Place: M800 Room: Salon del Mar A

Real-time Intrusion Detection in Power System Operations Jorge Valenzuela (Auburn University), Jianhui Wang (Argonne National Laboratory ), Nancy Bissinger (Auburn University) Abstract No. 692 *

Multi-objective Optimization Framework for the Selection of Microgrid Policies Juan Sáenz (University of Miami), Nurcin Celik (University of Miami) Abstract No. 983 *

Optimal Placement of Phasor Measurement Units Considering Reliability of Electrical Power Systems Seyedamirabbas Mousavian (Auburn University), Jorge Valenzuela (Auburn University) Abstract No. 1343 *

Track: Human Factors and Ergonomics Session: Decision Making and Sound Chair(s): Bankole Fasanya (North Carolina A&T State University) Time & Place: M800 Room: Salon del Mar B

Monotic and Diotic Speech Recognition of Bone Conducted Speech Maranda McBride (North Carolina A&T State University), Bankole Fasanya (North Carolina A&T State University), Phuong Tran (U.S. Army Research Laboratory), Tomasz Letowski (U.S. Army Research Laboratory) Abstract No. 5

| Welcome to the IIE Annual Conference & Expo 201346

ISERC Sessions

The Role of Gender in the Detection of Auditory Signal Changes Bankole Fasanya (North Carolina A&T State University), Maranda McBride (North Carolina A&T State University), Celestine Ntuen (North Carolina A&T State University), Emeka Idoye (North Carolina A&T State University) Abstract No. 298

Track: IIE Transactions Best Paper Session: IIE Transactions Best Papers - Q&RE and OE&A Chair(s): Ronald Askin (Arizona State University) Time & Place: M800 Room: Tropical A

Patterns of the Birnbaum Importance in Linear Consecutive-k-out-of-n Systems Xiaoyan Zhu (University of Tennessee), Qingzhu Yao (University of Tennessee), Way Kuo (City University of Hong Kong) Abstract No. 1489 *

Sequential Measurement Strategy for Wafer Geometric Profile Estimation Ran Jin (Virginia Tech.), Chia-Jung Chang (Penn State University), Jianjun Shi (Georgia Institute of Technology) Abstract No. 1490 *

Defeating symmetry in combinatorial optimization via objective perturbations and hierarchical constraints Ahmed Ghoniem (University of Massachusetts Amherst), Hanif Sherali (Virginia Polytechnic Institute and State University) Abstract No. 1491 *

Effective Budget Allocation to Combat Security Risks to Vulnerable Cities using Risk Averse Models Jian Hu (University of Michigan, Dearborn), Tito Homem-de-Mello (University Adolfo Ibañez), Sanjay Mehrotra (Northwestern University) Abstract No. 1492 *

Track: Engineering Education Session: Assessment of ABET Objectives and Outcomes Chair(s): Charlene Yauch (Milwaukee School of Engineering) Time & Place: M800 Room: Tropical B

Closing the Loop: Using Program Assessment Results to Drive Continued Improvement Eileen Van Aken (Virginia Tech), Fernando Gonzalez Aleu (Virginia Tech) Abstract No. 49 *

Utilizing Alumni Resumes for Assessment of Program Educational Objectives Charlene Yauch (Milwaukee School of Engineering) Abstract No. 276 *

Aligning Learning Outcomes and the Engineering Educational Accreditation Expectations Jeremi London (Purdue University), Barrett Caldwell (Purdue University), Kelly Patsavas (Purdue University) Abstract No. 605

Continuous Improvement Process of BSIE Curriculum through Objectives and Outcomes K. Jo Min (Iowa State University), John Jackman (Iowa State University), Douglas Gemmill (ISU), Devna Popejoy-Sheriff (Iowa State University) Abstract No. 1231

Track: Facility Logistics Session: Facility Logistics VI - Congestion Chair(s): Andrew Johnson (Texas A&M University) Time & Place: M800 Room: Tropical C

Optimizing Product Location in a Forward Pick Area of a Distribution Center to Reduce Congestion Uday Venkatadri (Dalhousie University), Vimalesh Vardarajan (Target Canada), Biman Das (Dalhousie University) Abstract No. 760

www.iienet.org/annual | 47 47

ISERC Sessions

Extensions and an application of an integrated batching and sequencing model to reduce picker blocking Andrew Johnson (Texas A&M University), Takashi Irohara (Sophia University), Ryoji Tsujiuchi (Sophia University) Abstract No. 464 *

Optimizing Material Handling Vehicle Routing in a Manufacturing Facility to Minimize Travel Time and Flow Congestion Nazanin Zinouri (Iowa state university), Guiping Hu (Iowa State University) Abstract No. 787

Track: Engineering Economy Session: Project Justification Methodologies Chair(s): Chin Hon Tan (National University of Singapore) Time & Place: M1100 Room: Ceiba

Capital Budgeting Technique for Investment Instruments Nikolay Kulakov (The Moscow Institute of Physics and Technology), Anastasia Kulakova (The Higher School of Economics (HSE), Moscow) Abstract No. 370

Valuation of Fast Pyrolysis Fractionation Pathway with Real Options Approach Yihua Li (Iowa State University), Guiping Hu (Iowa State University) Abstract No. 708

Double Positive Roots with P, A, and F Cash Flows Gillian Nicholls (University of Alabama in Huntsville), Neal Lewis (University of Bridgeport), Ted Eschenbach (TGE Consulting) Abstract No. 348

Expected Profit Under Maximin and Minimax Rules Chin Hon Tan (National University of Singapore), Guanghua Han (National University of Singapore), Joseph Hartman (University of Florida) Abstract No. 618

Track: Operations Research Session: Solution Methodologies for OR Problems Chair(s): Honggang Wang (Rutgers University) Time & Place: M1100 Room: Conf Center A

Solving Chance-Constrained Spanning k-Core Problem via Decomposition and Integer Programming Juan Ma (Oklahoma State University), Baski Balasundaram (Assistant Professor) Abstract No. 819

A New Optimization Algorithm for Non-Convex Problems Azmi Alazzam (State University of New York at Binghamton), Evrim Yuzgec (State University of New York at Binghamton), Harold Lewis (Binghamton University) Abstract No. 968

Multiobjective Simulation Optimization Using Zigzag Search Honggang Wang (Rutgers University) Abstract No. 1338

Track: Operations Research Session: Sensor and Network Applications of Operations Research Chair(s): Amy Cohn (University of Michigan), Jeremy Castaing (UM Student) Time & Place: M1100 Room: Conf Center B

A column generation approach to cluster intelligent transportation sensors Tejswaroop Geetla (University at Buffalo, SUNY), Rajan Batta (University at Buffalo (SUNY)) Abstract No. 722

| Welcome to the IIE Annual Conference & Expo 201348

ISERC Sessions

Optimally Locating Application Virtualization Resources on a Network Ayse Parlak (University of Pittsburgh), Jeffrey Kharoufeh (University of Pittsburgh) Abstract No. 1116

Optimally Scheduling Satellite Communications with Energy and Data Dynamics Jeremy Castaing (University of Michigan), Amy Cohn (University of Michigan), James Cutler (AED), Kyle Gilson (IOE), Sara Spangelo (AED) Abstract No. 1153

Track: Operations Research Session: Location Models Chair(s): Mark Daskin (University of Michigan) Time & Place: M1100 Room: Conf Center C

Mathematical Formulations for the Quadratic Assignment Problem with Rectilinear Distances Wilson Alvarez (University of Puerto Rico - Mayaguez), Hector Carlo (University of Puerto Rico - Mayaguez) Abstract No. 405

A Robust multicriteria optimization model for city logistic terminal locations Afrooz Ansaripour (University of Oklahoma), Theodore Trafalis (Sch. of Ind. Eng., Oklahoma Univ.) Abstract No. 750

New Approach to Capacity Modeling in Location Models Kayse Maass (University of Michigan), Mark Daskin (University of Michigan) Abstract No. 364

Track: Engineering Management Session: Strategic Management Chair(s): Fernando Deschamps (Pontifical Catholic University of Parana), Sergio E. Gouvea da Costa (Pontifical Catholic University of Parana) Time & Place: M1100 Room: Conf Center D

Vision Statement Development With Lego® Serious Play® Volker Grienitz (University of Siegen), André-Marcel Schmidt (University of Siegen), Per Kristiansen (Trivium), Helmut Schulte (Automotive Center Südwestfalen GmbH) Abstract No. 559

Strategic Support System With Focus On Success Factor Analysis André-Marcel Schmidt (University of Siegen), Volker Grienitz (University of Siegen), Michael Hausicke (University of Siegen) Abstract No. 560

Development of Enterprise Engineering Guidelines for Enterprise Diagnosis and Design Fernando Deschamps (Pontifical Catholic University of Parana), Edson Pinheiro de Lima (Pontifical Catholic Unversity of Parana), Eileen Van Aken (Virginia Tech), Sergio E. Gouvea da Costa (Pontifical Catholic University of Parana), Eduardo Alves Portela Santos (PUCPR) Abstract No. 966

Track: Work Systems Session: Work Systems Tutorials II Chair(s): Richard Elliott (The Boeing Company) Time & Place: M1100 Room: Conference 7

A Tutorial on developing Work Measurement Systems and a Work Measurement Plans George Bishop (West Monroe) Abstract No. 883 *

www.iienet.org/annual | 49 49

ISERC Sessions

A Tutorial on Designing a Work System for Competitive Advantage Richard Elliott (The Boeing Company) Abstract No. 751

Track: IE in Latin America Session: IE in Latin America Town Hall Meeting Chair(s): Homero H. Contreras (UPAEP) Time & Place: M1100 Room: Flamingo A

Track: Quality and Reliability Engineering Session: QC&RE Division Town Hall Meeting Chair(s): Time & Place: M1100 Room: Guayacan

Track: Supply Chain and Logistics Session: Production and Distribution Systems Modeling and Analysis Chair(s): Russell E. King (North Carolina State University) Time & Place: M1100 Room: Maguey

Determining the value of product substitution for a stochastic manufacturing/remanufacturing system Semra Sebnem Ahiska (Galatasaray University), Emre Kurtul (Galatasaray University), Russell E. King (North Carolina State University) Abstract No. 733

Designing a Distributor Compensation Scheme using Cooperative Game Theory Cinthia Perez (University of Florida), Joseph Geunes (University of Florida) Abstract No. 844

A logistics network design for tire recycling and remanufacturing Ozden Tozanli (Galatasaray University), Semra Sebnem Ahiska (Galatasaray University), Asli Gul Oncel (Galatasaray University), Russell E. King (North Carolina State University) Abstract No. 1121

A Newsvendor Problem with Replenishment Nils Buch (North Carolina State University), Russell E. King (North Carolina State University), Don Warsing (North Carolina State University), Ana Vila-Parrish (North Carolina State University) Abstract No. 316

Track: Poster Track Session: Poster Session M1 Chair(s): Time & Place: M1100 Room: Poster Hall

Value for Money Comparison with Traditional Economic Analysis Tools Samuel A. Bonet Olivencia (University of Puerto Rico, Mayaguez Campus), Mayra Méndez-Piñero (Univeristy of Puerto Rico) Abstract No. 1307

Integrating E-Tools in Manufacturing Workforce Safety Training Melissa Dorlette Paul (Clemson University), Kristin Frady (Clemson University), Melissa Zelaya (Clemson University), Reshmi Koikkara (Clemson University), Kapil Chalil Madathil (Clemson University), Anand Gramopadhye (Clemson University) Abstract No. 591

| Welcome to the IIE Annual Conference & Expo 201350

ISERC Sessions

Defining 6R Operations in Sustainable Supply Chains through Functional Modeling Mohannad Shuaib (University of Kentucky), Fazleena Badurdeen (University of Kentucky) Abstract No. 934

Workload Estimation Model for Patient Centered Medical Homes Saeede Ajorlou (WAYNE STATE UNIVERSITY), issac shams (WAYNE STATE UNIVERSITY), Kai Yang (Wayne State university) Abstract No. 492

Modeling and Analysis of Endoscope Reprocessing Operations Bryan Norman (University of Pittsburgh), Bopaya Bidanda Abstract No. 848

Track: Energy Session: Decision Making in Distributed Electricity Networks with Renewables Chair(s): Nurcin Celik (University of Miami) Time & Place: M1100 Room: Salon del Mar A

Planning a Distributed Wind-Solar System under Electric Vehicle Penetration Nhi Mai (Texas State University), Long Vo (Texas State University), Rana Dawud (Texas State University), Tongdan Jin (Texas State University) Abstract No. 100 *

Online State Estimation of a Microgrid using Particle Filtering Aristotelis E. Thanos (University of Miami), Nurcin Celik (University of Miami) Abstract No. 101 *

Meta-modeling Societal Health Costs of Electricity Generation Using Kriging Mark Rodgers (Rutgers University), David Coit (Rutgers University), Frank Felder (Rutgers University), Annmarie Carlton (Rutgers University), Ying Hung (Rutgers University), Saltuk Selcuklu (Rutgers University), Caroline Farkas (Rutgers University) Abstract No. 158 *

Track: Human Factors and Ergonomics Session: Usability in Healthcare Chair(s): Dorian Davis (North Carolina A&T State University) Time & Place: M1100 Room: Salon del Mar B

Usability Testing of Rescue Robot Interface Using Eye Tracking Dorian Davis (North Carolina A&T State University), Paula Franca (NC A&T State University), Ritson Delpish (North Carolina A&T State University), Steven Jiang (North Carolina A&T State University) Abstract No. 109

One Size Doesn't Fit All: Interface Design for Multiple Devices Theresa Guarrera (University at Buffalo), Ann Bisantz (University at Buffalo) Abstract No. 596

The Effects of User-Centered Design on the Usability of Patient Handling Equipment Mark Fenzl (University at Buffalo), Victor Paquet (Advisor/Professor), Andrew Ray (Advisor/Professor) Abstract No. 804

www.iienet.org/annual | 51 51

ISERC Sessions

Track: Engineering Management Session: Decision Making II Chair(s): Valdecy Pereira (Universidade Federal Fluminense (UFF)) Time & Place: M1100 Room: Tropical A

Effectiveness of Multicriteria for Prioritizing the Boarding to Off-shore Platforms Milton Erthal (Instituto Federal Fluminense and Universidade Candido Mendes), JONATAS ENOC TAVARES PEREIRA (Universidade Candido Mendes), Luiz Fernando Rosa Mendes (Instituto Federal Fluminense and Universidade Cândido Mendes) Abstract No. 530 *

MEG - Proposal of a multicriteria method for double selection Henrique da Hora (Instituto Federal Fluminense), Helder Costa (Universidade Federal Fluminense) Abstract No. 563 *

Track: Engineering Management Session: Planning and Performance Management Systems Chair(s): Roberto Antonio Martins (Federal University of Sao Carlos), Gul Okudan (The Pennsylvania State University) Time & Place: M1100 Room: Tropical B

Performance Measurement Challenges in Complex Military Operations Geert Letens (Royal Military Academy), Eileen Van Aken (Virginia Tech), Jennifer Farris (Texas Tech University) Abstract No. 363 *

Case Study on the Effect of Sustainability on Performance Measurement Systems Luciana R. Leite (Federal University of Sao Carlos), Eileen Van Aken (Virginia Tech), Roberto Antonio Martins (Federal University of Sao Carlos) Abstract No. 404 *

Multiple Generation Product Line Planning with Consideration of Technology Evolution Chun-yu Lin (The Pennsylvania State University), Gul Okudan (The Pennsylvania State University) Abstract No. 1398

Track: Engineering Management Session: Performance Management Systems Chair(s): Heather Keathley (Virginia Polytechnic Institute and State University) Time & Place: M1100 Room: Tropical C

Distributed teams performance measurement capabilities: a systematic literature review Pedro Ferreira (Pontifical Catholic University of Parana), Edson Pinheiro de Lima (Pontifical Catholic Unversity of Parana), Sergio E. Gouvea da Costa (Pontifical Catholic University of Parana) Abstract No. 576 *

Systematic Literature Review on the Factors that Affect Performance Measurement System Implementation Heather Keathley (Virginia Polytechnic Institute and State University), Eileen Van Aken (Virginia Tech) Abstract No. 1114

Track: Engineering Management Session: Project Management Chair(s): Gillian Nicholls (University of Alabama in Huntsville) Time & Place: M1230 Room: Conf Center D

Applying Agile Project Management to the Tasks of a Professor Gillian Nicholls (University of Alabama in Huntsville), Neal Lewis (University of Bridgeport), Ted Eschenbach (TGE Consulting) Abstract No. 347

| Welcome to the IIE Annual Conference & Expo 201352

ISERC Sessions

A Framework for Project Selection using Knowledge Jose Cintron (University of Central Florida), Wilawan Onkham (University of Central Florida), Luis Rabelo (Department of Industrial Engineering and Management Systems University of Central Florida ), Alfonso Sarmiento (University of La Sabana) Abstract No. 381

Integrated Budget Change Request Process For a Projectized Organization Lorna Perez-Garcia (University of Puerto Rico Mayaguez Campus), Roberto Seijo-Vidal (University of Puerto Rico, Mayagüez Campus) Abstract No. 1273

Project Management Office Implementation Framework: A Case Study Bruno Catroli (UFF), Valdecy Pereira (Universidade Federal Fluminense (UFF)), Helder Costa (Fluminense Federal University) Abstract No. 907

Track: Homeland Security Session: Infrastructure Resilience Analysis 2 Chair(s): Jose Ramirez-Marquez (Stevens Institute of Technology) Time & Place: M1230 Room: Conference 3

Multibojective Decision Making for Critical Infrastructure Resilience Hiba Baroud (University of Oklahoma), Kash Barker (University of Oklahoma), Jose Ramirez-Marquez (Stevens Institute of Technology) Abstract No. 1130

Modeling cascading failure and restoration times in the face of intelligent adversaries Sinan Tas (Penn State University-Berks College ), Vicki M. Bier (University of Wisconsin-Madison) Abstract No. 1099

Intelligent Adversary Modeling of Homeland Security Networks Gregory Parnell (United States Military Academy), Roger Burk (USMA at West Point), Jason Merrick (Virginia Commonwealth University) Abstract No. 1182

Track: Social, Environmental and Sustainability Session: Sustainability and Environment Chair(s): Nazario Ramirez (University of Puerto Rico) Time & Place: M1230 Room: Conference 4/5

Adaptive Dynamic Programming for Airport Deicing Zirun Zhang (The University of Texas at Arlington), Jay Rosenberger (The University of Texas Arlington), Victoria Chen (University of Texas at Arlington), Li Zeng (The University of Texas at Arlington), Dan Bergman (Dallas/Fort Worth International Airport) Abstract No. 859

Coverage Computational and Simulation Model for Sensor Network Stochastic Deployment Sobhi Mejjaouli (University of Arkansas at Little Rock), Radu Babiceanu (University of Arkansas at Little Rock) Abstract No. 832

Seasonal Hurricane Activity Extended Forecast for Atlantic Basin Joan Castro (University of Puerto Rico), Nazario Ramirez (University of Puerto Rico) Abstract No. 1294

Multivariate Bernoulli Distribution to Predict the Location of Rainy Pixels Nazario Ramirez (University of Puerto Rico), Joan Castro (University of Puerto Rico) Abstract No. 1128

www.iienet.org/annual | 53 53

ISERC Sessions

Track: Production Planning and Scheduling Session: Production Planning and Scheduling: Recent Advances in Theory and Applications Chair(s): Zhe Liang (Peking University) Time & Place: M1230 Room: Conference 6

A network model for the robust weekly aircraft maintenance routing problem Zhe Liang (Peking University) Abstract No. 810 *

A Job Shop Scheduling Model with Rework Time in Electronics Manufacturing Venkatesh Arasanipalai Raghavan (State University of New York, Binghamton), Sang Won Yoon (State University of New York at Binghamton), Krishnaswami Srihari (State University of New York, Binghamton) Abstract No. 1346 *

Track: Systems Engineering Session: Aerospace Systems Chair(s): Robert Cloutier (Stevens Institute of Technology) Time & Place: M1230 Room: Conference 7

Hazard and Safety Risk Integration for an Aircraft Carrier-Based UAS James Luxhoj (Rutgers University) Abstract No. 12

Probabilistic Causal Modeling of Runway Incursion (RI) Safety Risk James Luxhoj (Rutgers University), M. Kazim Topuz (Rutgers University) Abstract No. 70

Automating Real-Time Fault Detection for UTSI Airborne Science Applications Samuel Vivek (University of Tennessee), John Muratore (SpaceX), Philip Appiah Kubi (Ohio University), Isaac Atuahene (University Of Tennessee) Abstract No. 1146

Track: Service Systems Session: Cancer Care Service Systems Chair(s): Bjorn Berg (George Mason University) Time & Place: M1230 Room: Conference 8+9

A Simulation Study of an Outpatient Cancer Clinic Md Mahmudur Rahman (Montana State University), Anali Huggins (Montana State University), David Claudio (Montana State University) Abstract No. 175 *

Patient Scheduling in a Proton Therapy Facility: An MDP Approach Ridvan Gedik (University of Arkansas), Chase Rainwater (University of Arkansas), Shengfan Zhang (University of Arkansas) Abstract No. 493 *

Online optimization of radiotherapy patient scheduling Nadia Lahrichi (École Polytechnique de Montréal) Abstract No. 676 *

Track: Computers and Information Systems Session: Intelligent Engineering Systems II Chair(s): Hoo Sang Ko (Southern Illinois University Edwardsville) Time & Place: M1230 Room: Flamingo A

Network Performance Models and Node Removal Strategies Ehsan Jahanpour (Southern Illinois University Edwardsville), Xin Chen (Southern Illinois University Edwardsville) Abstract No. 43 *

| Welcome to the IIE Annual Conference & Expo 201354

ISERC Sessions

Automated Disassembly Sequence Planning And Optimization Deepak Agrawal (Pennsylvania State University), Daniel Finke (Pennsylvania State University), Phani Nallamothu (Pennsylvania State University), Supreet Mandala (American Airlines), Soundar Kumara (The Pennsylvania State University) Abstract No. 300

Hybrid Simulation-based Planning and Evaluation Framework for Solid Waste Management and Recycling Systems Xiaoran Shi (The University of Miami), Eric Antmann (The University of Miami), Nurcin Celik (University of Miami) Abstract No. 1098

Track: Tutorials Session: Graduate Study in Industrial Engineering Chair(s): Jeffrey Herrmann (University of Maryland) Time & Place: M1230 Room: Flamingo B

Contemplating study in a Ph.D. program in Industrial Engineering Paul Kvam (Georgia Institute of Technology), Joseph Hartman (University of Florida), César Malavé (Texas A&M University), César Malavé (Texas A&M University), César Malavé (Texas A&M University) Abstract No. 1471 *

Track: Manufacturing and Design Session: Biomedical Manufacturing - III Chair(s): Rohan Shirwaiker (North Carolina State University) Time & Place: M1230 Room: Flamingo C

Characterization of Vessel-like Printable Cellular Microfluidic Channel yahui zhang (u of iowa), Ibrahim Tarik Ozbolat (The University of Iowa) Abstract No. 14

Application of Manufacturing Process Engineering Approach to Regenerative Medicine – A Cartilage Tissue Production Case-study Molly Purser (North Carolina State University), Rohan Shirwaiker (North Carolina State University), Denethia Green (Wake Forest Institute for Regenerative Medicine), Richard Wysk (North Carolina State University), Sang Jin Lee (Wake Forest Institute for Regenerative Medicine), John Jackson (Wake Forest Institute for Regenerative Medicine), James Yoo (Wake Forest Institute for Regenerative Medicine), Anthony Atala (Wake Forest Institute for Regenerative Medicine) Abstract No. 795

Biomechanical Characterization of Biodegradable Composite Polycaprolactone and Polyglycolide Cartilage Scaffolds John Benhur Jonnalagadda Thimothy (Texas Tech University), Iris Rivero (Iowa State University) Abstract No. 1323

Track: Modeling and Simulation Session: Simulation Metamodeling and Optimization Chair(s): Jie Xu (George Mason University) Time & Place: M1230 Room: Flamingo D

New Results for Simulation Metamodels Augmented with Directed Stochastic Gradient Estimates Michael Fu (University of Maryland, College Park), Huashuai Qu (University of Maryland) Abstract No. 19 *

Characterizing Heuristic Performance in Large Scale Dual Resource Constrained Job Shops Benjamin Lobo (US Army Research Laboratory, Aberdeen Proving Ground), James Wilson (NC State University), Kristin Thoney (North Carolina State University), Thom Hodgson, Russell E. King (North Carolina State University) Abstract No. 868

Discrete Optimization via Simulation for Semiconductor Manufacturing Production Planning Yingzhuo Dai (George Washington University), Jie Xu (George Mason University), Feng Yang (West Virginia University) Abstract No. 689 *

www.iienet.org/annual | 55 55

ISERC Sessions

Track: Poster Track Session: Poster Session M2 Chair(s): Time & Place: M1230 Room: Poster Hall

Development of a Model for Multi-Asset Pharmaceutical Laboratories in Bogota Ever Angel Fuentes Rojas (Universidad Libre) Abstract No. 1077

Socio-Technical Analysis of Factors Influencing Decisions to Adopt Electric Vehicles Ona Egbue (Missouri University of Science and Technology), Suzanna Long (Missouri University of Science and Technology) Abstract No. 1324

Developing a Mixed-Integer Mathematical Model to Schedule Treatment Rooms in a Proton Therapy Center Shima Mohebbi (University of Tennessee), Xueping Li (The University of Tennessee), Tom Berg (Y-12 National Security Complex), Mark Leuschner (ProCure Corp.), Yang Sun (California State University, Sacramento) Abstract No. 667

Medical Device Training and Classification System Margaret Joanna Rys (Kansas State University), Courtney Taylor (KSU Dept. of IMSE), Mark Prieb (KSU Dept. of IMSE), Mark Prieb (KSU Dept. of IMSE) Abstract No. 503

Evaluating the Locations of Hand Sanitizer Dispensers in a Hospital Laila Cure (Western Michigan University), Richard Van Enk (Bronson Methodist Hospital) Abstract No. 477

Block Allocation – Balancing Block Size, OR Requirements, and Risk Rebecca Weiss (Clemson University), Kevin Taaffe (Clemson University), Lawrence Fredendall (Clemson University), Narges Hosseini (Clemson University) Abstract No. 412

The Increasing Demand for Industrial Engineering Professionals in Costa Rica Johanna Madrigal (ULACIT), Libni Gamboa (Student), Erik Gregory (Director of the School of Industrial Engineering) Abstract No. 74

Effect of the Payment System on Puerto Rico’s Dairy Industry Supply Chain Dhania M. Silva-Troche (University of Puerto Rico Mayagüez Campus), Allison Y Wong-Cinco (Co-Author; University of Michigan), Betzabé Rodríguez (University of Puerto Rico- Mayagüez Campus) Abstract No. 426

Assessing Lead Time Uncertainty in Tradition Bound Commodity Ordering Meredith Deneweth (Oakland University), Sankar Sengupta (Oakland University), Robert Van Til (Oakland University) Abstract No. 288

Trends in Home Product Injuries: Comparisons Between 1978-1982 and 2006-2010 Farhana Proma (University of Texas at Arlington), Sheik Imrhan (University of Texas at Arlington) Abstract No. 1162

Using Biometric Adaptive Ergonomics to Accommodate Workers with Disabilities Michelle Kringen (South Dakota School of Mines and Technology), Nicholas Grimshaw (South Dakota School of Mines and Technology), Cody Kopriva (SDSMT), Dean Jensen (SDSMT), Adam Piper (South Dakota School of Mines & Technology) Abstract No. 829

Franchise Pricing in Retail Price Optimization Mehmet Gokhan (IBM) Abstract No. 1516 *

| Welcome to the IIE Annual Conference & Expo 201356

ISERC Sessions

Track: IIE Transactions Best Paper Session: IIE Transactions Best Papers - S&L and D&M Chair(s): Ronald Askin (Arizona State University) Time & Place: M1230 Room: Tropical A

Reducing Emergency Department Waiting Times by Adjusting Work Shifts Ola Jabali (HEC Montréal), Nico P. Dellaert (Technische Universiteit Eindhoven) Abstract No. 1486 *

Designing Manufacturing Facility Layouts to Mitigate Congestion Min Zhang (Avis Budget Group Inc) Abstract No. 1487 *

Just-in-Time Part Supply with Tow Trains Nils Boysen (Friedrich-Schiller-Universität Jena) Abstract No. 1488 *

Track: Engineering Management Session: Operations Management Chair(s): Funda Samanlioglu (Kadir Has University) Time & Place: M1230 Room: Tropical B

Selection of Raw Material for Biodiesel Production in Turkey Funda Samanlioglu (Kadir Has University), Enver Aksu (Kadir Has University), Melis Nacak (Kadir Has University), Resat Batuhan Direkci (Kadir Has University) Abstract No. 319

Developing and Testing a Mass Customization Framework for Automotive Industry Andre Luiz Gazoli de Oliveira (Pontifical Catholic University of Parana), Sergio E. Gouvea da Costa (Pontifical Catholic University of Parana), Edson Pinheiro de Lima (Pontifical Catholic Unversity of Parana) Abstract No. 1076

Control and Supervision Function Reference Model and Auditing Fernando Deschamps (Pontifical Catholic University of Parana), Kenji Philip Higashi (Pontifical Catholic University of Parana), Willian Giordani da Silveira (Pontifical Catholic University of Parana), Edson Pinheiro de Lima (Pontifical Catholic Unversity of Parana), Eduardo Alves Portela Santos (PUCPR) Abstract No. 1103

Track: Facility Logistics Session: Facility Logistics III -Networks Chair(s): Rakesh Nagi (University at Buffalo (SUNY)) Time & Place: M1230 Room: Tropical C

Optimal placement of a finite-size facility: A computational study of sequential and parallel implementations Ketan Date (University at Buffalo (SUNY)), Rakesh Nagi (University at Buffalo (SUNY)) Abstract No. 420

A Robust Material-Flow Network Design under Demand Uncertainty Shunichi Ohmori (Waseda University), Kazuho Yoshimoto (Waseda University), Hiromasa Akagi (Kajima Corporation), Fumi Sekimoto (Kajima corporation) Abstract No. 484

Physical Internet Transit Facilities Network Design for Distributed Trailer Transport Benoit Montreuil (Laval University), Collin Thivierge (Laval University, CIRRELT), Driss Hakimi (Laval University, CIRRELT), Zachary Montreuil (Laval University, CIRRELT) Abstract No. 1463

www.iienet.org/annual | 57 57

ISERC Sessions

Track: Lean Systems Session: Lean Division Town Hall Meeting Chair(s): MD Sarder (University of Southern Mississippi) Time & Place: M200 Room: Ceiba

Track: Operations Research Session: Workforce Planning with Learning Chair(s): David Nembhard (Pennsylvania State University) Time & Place: M200 Room: Conf Center A

Emotional Intelligence, Communication, and Team Performance Gretchen Macht (Pennsylvania State University), Robert M. Leicht (Pennsylvania State University), David Nembhard (Pennsylvania State University) Abstract No. 1432

Reformulation Techniques for Solving Non-linear Workforce Planning Models with Learning Austin Chacosky (Rochester Institute of Technology), Scott Grasman (Rochester Institute of Technology), Scott Grasman (Rochester Institute of Technology), Michael Hewitt (Rochester Institute of Technology), Barrett Thomas (University of Iowa) Abstract No. 742

Cross-Training Decisions for a Multi-Shift Workforce Allocation Problem Aditya Gandhi (Rochester Institute of Technology), Scott Grasman (Rochester Institute of Technology), Shrikant Jarugumilli (Missouri University of Science & Technology) Abstract No. 513

Track: Healthcare Systems Session: Occupational and Public Health Chair(s): Brittany Melton (Purdue University) Time & Place: M200 Room: Conf Center B

Occupational Health and Safety Management System for Mexican Manufacturing Companies Luis Cuautle (UPAEP), Gerson Beristain (UPAEP) Abstract No. 84

Effects of Air Pollutants and Meteorological Variables on Asthma Prevalence Nazario Ramirez (University of Puerto Rico), Erica Cosme Negron (University of Puerto Rico Mayaguez Campus), Joan Castro (University of Puerto Rico) Abstract No. 1072

Investigating the likely Disability Inducing Factors in Disabled Population Lavanya Marella (University of Tennessee), Isaac Atuahene (University Of Tennessee), Gagan Rajpal (University of Tennessee at Knoxville), Rupy Sawhney (The University of Tennessee) Abstract No. 1207

Track: Healthcare Systems Session: Invited Session - Healthcare Decision Analysis Chair(s): Bichen Zheng (State University of New York at Binghamton) Time & Place: M200 Room: Conf Center C

Group Technology-based Patient Grouping and Prioritizing Algorithm Omar Ashour (The Pennsylvania State University ), Gul Okudan (The Pennsylvania State University) Abstract No. 377

| Welcome to the IIE Annual Conference & Expo 201358

ISERC Sessions

Hospital Readmission Prediction Using Swarm Intelligence-based Support Vector Machines Jinghe Zhang (State University of New York at Binghamton), Sang Won Yoon (State University of New York at Binghamton), Mohammad Khasawneh (State University of New York at Binghamton), Srikanth Poranki (UHS Hospitals), Krishnaswami Srihari (State University of New York, Binghamton) Abstract No. 1112

A Neural Network-based Approach for Predicting Organ Donation Potential Benjamin Schleich (State University of New York at Binghamton), Sarah Lam (State University of New York at Binghamton), Sang Won Yoon (State University of New York at Binghamton), Waheed Tajik (New York Organ Donor Network), Michael Goldstein (New York Organ Donor Network), Helen Irving (New York Organ Donor Network) Abstract No. 1192

An Optimization Model for Reliable Healthcare Inventory Sharing Network Bichen Zheng (State University of New York at Binghamton), Sang Won Yoon (State University of New York at Binghamton), Susan Lu (Binghamton University ) Abstract No. 1274

Track: IE in the Military Session: Simulation, Modeling & Analysis Chair(s): Carl Parson (Air Force Institute of Technology) Time & Place: M200 Room: Conference 3

A Simulation Experiment to Improve the F100-229 Product Support Operation Alex Gutman (AFIT Center for Operational Analysis), Raymond Hill (Air Force Institute of Technology), Roger Moulder (Air Force Materiel Command) Abstract No. 603

Effect of the Analysis of Alternatives on the DoD Acquisition System Eugene Rex Jalao (Arizona State University), Danielle Worger (Arizona State University), J. Robert Wirthlin (Air Force Institute of Technology), John Colombi (The Air Force Institute of Technology), Teresa Wu (Arizona State University) Abstract No. 1219

Statistical Analysis of Body Armor Testing Procedures Ashok Deb (United States Military Academy), Fei Hoai Lee (Coyote Logistics, LLC) Abstract No. 1452

Operational Simulation, Modeling, and Analysis of Mission Planning at the 618th Tanker Airlift Control Center Carl Parson (Air Force Institute of Technology), Brent Russell (Air Force Institute of Technology), Darryl Ahner (The Air Force Institute of Technology) Abstract No. 34

Track: Social, Environmental and Sustainability Session: Green Technology Chair(s): Jose Francisco Espiritu Nolasco (The University of Texas at El Paso) Time & Place: M200 Room: Conference 4/5

Sustainable Cold Chain Using Fiber-Based Evaporative Cooling Xiaoyu Guo (UNIVERSITY OF MISSOURI), Luis Occeña (University of Missouri) Abstract No. 853

Packaging Materials Selection Tool Considering Environmental Sustainability Rajesh Gutta (University of Texas at San Antonio), Hung-da Wan (University of Texas at San Antonio), Glenn Kuriger (University of Texas at San Antonio) Abstract No. 1019

Improving Efficiency and Reducing Waste Water in a Yeast Plant Stacey Miller (University of Southern Mississippi), Mohammad Rahman (The University of Southern Mississippi), Faisal Mallum (University of Southern Mississippi) Abstract No. 1399

www.iienet.org/annual | 59 59

ISERC Sessions

Second-Generation Biofuel Feedstock Optimization Considering Different Land Cover Scenarios and Watershed Impacts Rodney Vance (The University of Texas at El Paso), Jose Francisco Espiritu Nolasco (The University of Texas at El Paso) Abstract No. 1370

Track: Production Planning and Scheduling Session: Group Scheduling and Logistics Chair(s): Rasaratnam Logendran (Oregon State University) Time & Place: M200 Room: Conference 6

Hybrid flowshop scheduling problem with a bi-criteria objective and group technology assumption Mir Abbas Bozorgirad (Oregon State University), Rasaratnam Logendran (Oregon State University) Abstract No. 134

A Lower Bound Based Branch-and-Price Mechanism in the Integration of Kitting and Assembly Operations M.T. Yazdani Sabouni (Oregon State University), Rasaratnam Logendran (Oregon State University) Abstract No. 135

Track: Systems Engineering Session: Systems Theory Chair(s): Robert Cloutier (Stevens Institute of Technology) Time & Place: M200 Room: Conference 7

A Historical Perspective of Systems Theory Kevin Adams (Old Dominion University), Patrick Hester (Old Dominion University), Joseph Bradley (NCSOSE/ODU) Abstract No. 434

Developing and implementing a domain independent graduate level systems Integration verification and validation course Shamsnaz Virani (Penn State Great Valley), Nil Ergin (Penn State Great Valley ) Abstract No. 1145

An Assessment of Resource Potential to Promote Improved Systems Patricia Banks (NC A&T State University), Paul Stanfield (North Carolina A&T State University), Steven Jiang (North Carolina A&T State University), Patrick Wanko (NC A&T State University) Abstract No. 1230

Track: Service Systems Session: Service Systems - Healthcare II Chair(s): Xiaoyan Zhu (University of Tennessee) Time & Place: M200 Room: Conference 8+9

A Decision Tree Model for Predicting Heart Failure Patient Readmissions James Natale (University of Akron), Shengyong Wang (The University of Akron), Joyce Taylor (Lake Health) Abstract No. 105 *

Job Shop Scheduling Model for Clinic Patient Scheduling Zhaoxia Zhao (University of Tennessee, Knoxville), Xiaoyan Zhu (University of Tennessee), Tom Berg (Y-12 National Security Complex), Joseph Wilck (East Carolina University) Abstract No. 106 *

Healthcare Reimbursement Plans: Methodology, Advantages and Disadvantages Gagan Rajpal (University of Tennessee at Knoxville), Rogerio Santana Peruchi (Federal University of Itajubá, Itajubá, MG 37500-903, Brazil), Isaac Atuahene (University Of Tennessee), Rupy Sawhney (The University of Tennessee) Abstract No. 429 *

| Welcome to the IIE Annual Conference & Expo 201360

ISERC Sessions

Track: Supply Chain and Logistics Session: Supply Chain Resilience Chair(s): Ashlea Milburn (University of Arkansas) Time & Place: M200 Room: Flamboyan

Supporting Acquisition Decisions Using a Supply Chain Viability Paradigm Mariah Magagnotti (Clemson University), Scott Mason (Clemson University) Abstract No. 205 *

Analyzing Economic Vulnerability in Supply Chains ivan hernandez (Stevens Institute of Technology), Jose Ramirez-Marquez (Stevens Institute of Technology), David Nowicki (University of North Texas) Abstract No. 206 *

Bayesian Methodology for Supply Chain Risk Analysis: Concept and Case Studies Joseph Amundson (University of Kentucky), Adam Brown (University of Kentucky), Mohannad Shuaib (University of Kentucky), Fazleena Badurdeen (University of Kentucky), I.S. Jawahir (University of Kentucky), Thomas Goldsby (The Ohio State University), Deepak Iyengar (Central Washington University) Abstract No. 1065

A Supply Chain Planning Model to Contain Demand Non-fulfillment Failures Kanchan Das (East Carolina University), Reza Lashkari (University of Windsor) Abstract No. 322

Track: Emerging Frontiers in IE Research Session: EFIE: Emerging Research Trends in Healthcare Chair(s): Waldemar Karwowski (UCF) Time & Place: M200 Room: Flamingo B

Emerging Research Trends in Healthcare Margaret Brandeau (Stanford University), Cerry Klein (University of Missouri), Eva Lee, Edwin Romeijn (National Science Foundation), Teresa Zayas-Caban (Agency for Healthcare Research and Quality) Abstract No. 1503

Track: Manufacturing and Design Session: Biomedical Manufacturing - IV Chair(s): Molly Purser (North Carolina State University), Rohan Shirwaiker (North Carolina State University) Time & Place: M200 Room: Flamingo C

Cell Viability Characterization of Bioprintable Blood-vessel-like Cellular Channels towards 3D Organ Fabrication Yin Yu (University of Iowa), Ibrahim Tarik Ozbolat (The University of Iowa) Abstract No. 7

Electrically-Activated Multi-Metal Orthopedic Implant Design for Antimicrobial Prophylaxis Rohan Shirwaiker (North Carolina State University), Zhuo Tan (North Carolina State University) Abstract No. 797

Direct Bioprinting of Multi-Cellular Microfluidic Channels towards Functional Blood Vessel Fabrication Yin Yu (University of Iowa), yahui zhang (u of iowa), Ibrahim Tarik Ozbolat (The University of Iowa) Abstract No. 878

www.iienet.org/annual | 61 61

ISERC Sessions

Track: Modeling and Simulation Session: Simulation Applications in Healthcare II Chair(s): Paola Pacheco (University of Puerto Rico Mayagüez Campus) Time & Place: M200 Room: Flamingo D

Modeling Uncertainty due to Instrument Drift in Clinical Laboratories Varun Ramamohan (Purdue University), Jim Abbott (Roche Diagnostics Corporation), George Klee (Mayo Clinic), Yuehwern Yih (Purdue University) Abstract No. 1390

Simulation Modeling of Clinic Telephone Systems under PCMH Concept Jing Shi (North Dakota State University), Ergin Erdem (North Dakota State University), Heping Liu (North Dakota State University) Abstract No. 1263

Modeling, Analysis, and Design of Gastroenterology Clinic: A Simulation Approach Xiang Zhong (University of Wisconsin Madison), Jie Song (Department of Industrial Engineering and Management, Peking University, Beijing, China ), Jingshan Li (University of Wisconsin - Madison), Lauren Fiedler (University of Wisconsin Medical Foundation, Middleton, WI ), Susan M. Ertl (University of Wisconsin Medical Foundation) Abstract No. 885

High-Dimensional Disease Outbreak Detection Using Tree-Based Ensembles Saylisse Davila (University of Puerto Rico-Mayaguez), George Runger (Arizona State University), Paola Pacheco (University of Puerto Rico Mayagüez Campus), Mia Rigney (Binghamton University) Abstract No. 520

Track: Quality and Reliability Engineering Session: Reliability Tests and Information Aggregation Chair(s): Jian Liu (The University of Arizona) Time & Place: M200 Room: Guayacan

System Reliability Demonstration Test Planning with Multi-level Information Aggregation Mingyang Li (The University of Arizona), Jian Liu (The University of Arizona) Abstract No. 536

Probabilistic-Physics-of-Failure Degradation Model Zhou Yang (Rutgers University), Elsayed Elsayed (Rutgers University), Rui Kang (Beihang University) Abstract No. 1096

Reliability Estimation Using Accelerated Life Testing and Degradation Data Elsayed Elsayed (Rutgers University), Dingguo Hua (Rutgers University) Abstract No. 1124

Track: Supply Chain and Logistics Session: Logistics Network Modeling Chair(s): Xueping Li (The University of Tennessee) Time & Place: M200 Room: Maguey

Ant Colony Optimization and Genetic Algorithm Approaches to Solving the Split Delivery Vehicle Routing Problem Joseph Wilck (East Carolina University), Gautham Rajappa (University of Tennessee) Abstract No. 264 *

Centralized cross-dock placement and vehicle routing in large-scale supply chains Zhili Zhou (IBM Research) Abstract No. 552 *

The Value of Trading Platforms in Online Reverse Auctions Lian Qi (Rutgers University) Abstract No. 1479 *

| Welcome to the IIE Annual Conference & Expo 201362

ISERC Sessions

Modeling Suppliers’ Cooperation in e-Supply Networks using Coalitional Game Theory Shima Mohebbi (University of Tennessee), Xueping Li (The University of Tennessee) Abstract No. 435 *

Track: Energy Session: Energy System Optimization and Decision Support-II Chair(s): Yong Fu (Mississippi State University) Time & Place: M200 Room: Salon del Mar A

Transmission Switching in Power System Operations Jianhui Wang (Argonne National Laboratory ) Abstract No. 242 *

Two-Stage Minimax Regret Unit Commitment Considering Wind Power Uncertainty Ruiwei Jiang (University of Florida), Jianhui Wang (Argonne National Laboratory ), Muhong Zhang (Arizona State University), Yongpei Guan (University of Florida) Abstract No. 243 *

Track: Human Factors and Ergonomics Session: Neck and Obesity Biomechanics Chair(s): Ashish Nimbarte (West Virginia University) Time & Place: M200 Room: Salon del Mar B

Influence of Obesity and Age on Upper Extremity Functional Performance Lora Cavuoto (University at Buffalo), Maury Nussbaum (Virginia Tech) Abstract No. 233

Biomechanical evaluation of surgical loupes Ashish Nimbarte (West Virginia University), Marsha Chapman (WVU), Jennifer Sivak-Callcott (West Virginia University), Xiaopeng Ning (West Virginia University), Majid Jaridi (West Virginia University) Abstract No. 1258

Flexion-relaxation response induced by neck extensor muscle fatigue Ashish Nimbarte (West Virginia University), Majed Zreiqat (West Virginia University), Christopher Moore (West Virginia University), Xiaopeng Ning (West Virginia University) Abstract No. 1302

Neural And Muscular Alterations in Healthy And Obese During Intermittent Static Exertions Ashley Shortz (Michigan Technological University), Ranjana Mehta (Texas A&M Health Science Center) Abstract No. 1319

Track: Engineering Education Session: Active Learning Chair(s): Karen Bursic (University of Pittsburgh) Time & Place: M200 Room: Tropical A

Increasing the Practice of Pedagogical Interventions that Work Karen Bursic (University of Pittsburgh) Abstract No. 672

Improving ABET Outcomes through Active Learning in an Engineering Management Course William Schell (Montana State University - Bozeman) Abstract No. 1140

Problem-based learning and games, a great partnership for teaching discrete event simulation Heriberto Garcia-Reyes (Tecnologico de Monterrey) Abstract No. 1058

www.iienet.org/annual | 63 63

ISERC Sessions

Track: Engineering Management Session: Leadership and Change Management Chair(s): Arsalan Safari (University of Waterloo), Gene Dixon (ECU) Time & Place: M200 Room: Tropical B

Continuing the Conversation: The Leadership Process Gene Dixon (ECU) Abstract No. 8

Effective Leadership using System Dynamics and the Matrix of Change Wilawan Onkham (University of Central Florida), Ahmed Elattar (Department of Industrial Engineering and Management Systems University of Central Florida ), Luis Rabelo (Department of Industrial Engineering and Management Systems University of Central Florida ) Abstract No. 345

Preliminary Framework for Aligning Organizational Change Serina Al-Haddad (University of Central Florida), Timothy Kotnour (University of Central Florida) Abstract No. 359

Track: Facility Logistics Session: Facility Logistics VIII - Manufacturing and Recycling Chair(s): Dale Masel (Ohio University) Time & Place: M200 Room: Tropical C

Integrating Shared Storage Space Deployment in the Holographic Design of Refurbishing and Recycling Facilities Suzanne Marcotte (Université du Québec à Montréal), Benoit Montreuil (Laval University) Abstract No. 1161

Designing Manufacturing Facilities with Rotated Aisles to Reduce Travel Distance Dale Masel (Ohio University) Abstract No. 462 *

Multi-Zone Line Balancing Heuristic with Resource and Storage Constraints Bryan Pearce (Clemson University), Mary Kurz (Department of Industrial Engineering, Clemson University), Laine Mears (Clemson University), Kavit Antani (Clemson University) Abstract No. 1144

Track: Lean Systems Session: Lean Implementations Chair(s): Hung-da Wan (University of Texas at San Antonio) Time & Place: M330 Room: Ceiba

A Case Study of Lean Implementation at Sandia National Laboratories Raul De Luna (University of Texas at San Antonio), Hung-da Wan (University of Texas at San Antonio), Mike R. Lopez (Sandia National Laboratories), F.F. Chen (University of Texas at San Antonio) Abstract No. 176 *

Lean Unconventional Oil and Gas Development Alfred D'Ambrosio (Hess Corporation), Ertunga Ozelkan (The University of North Carolina at Charlotte) Abstract No. 185 *

Lean and Green Supply Chain Initiatives: A Case Study Virgilo Machado (New University of Lisbon (UNL)/ Faculty of Sciences and Technology(FCT)), Susana Duarte (FCT UNL UNIDEMI) Abstract No. 240

| Welcome to the IIE Annual Conference & Expo 201364

ISERC Sessions

Track: Healthcare Systems Session: Proton Therapy Chair(s): Gino Lim (University of Houston) Time & Place: M330 Room: Conf Center B

The impact of tumor geometrical changes on IMPT treatment plans Laleh Kardar (University of Houston), Gino Lim (University of Houston), Wenhua Cao (Department of Industrial Engineering, University of Houston), Xiaodong Zhang (The University of Texas MD Anderson Cancer Center) Abstract No. 1151

Incorporating Dose-Volume Constraints in Fluence Map Optimization for Intensity Modulated Proton Therapy Maryam Zaghian (University of Houston), Gino Lim (University of Houston), Wei Liu (Assistant Professor, Department of Radiation Physics, Division of Radiation Oncology, The University of Texas MD Anderson Cancer Center, Houston, TX), Radhe Mohan (Professor, Department of Radiation Physics, Division of Radiation Oncology, The University of Texas MD Anderson Cancer Center, Houston, TX) Abstract No. 1229

Selecting Proton Energy Levels in Pencil Beam Scanning Proton Therapy Wenhua Cao (University of Houston), Gino Lim (University of Houston), Xiaodong Zhang (The University of Texas MD Anderson Cancer Center) Abstract No. 1293

Track: Healthcare Systems Session: Emergency Management Chair(s): Bryan Norman (University of Pittsburgh) Time & Place: M330 Room: Conf Center C

Modeling Outreach Activities with WHO/EPI Vaccine Supply Chains Jung Lim (University of Pittsburgh), Sunghoon Lim (University of Pittsburgh), Erin Claypool (University of Pittsburgh), Shawn Brown (University of Pittsburgh), Bruce Lee (University of Pittsburgh), Bryan Norman (University of Pittsburgh), Jayant Rajgopal (University of Pittsburgh) Abstract No. 1201

Healthcare Service Modeling to Minimize Disruptions due to Natural Disasters MD Sarder (University of Southern Mississippi), Gazi Iqbal (University of Southern Mississippi) Abstract No. 1316

Track: Engineering Management Session: Learning Organizations Chair(s): Geert Letens (Royal Military Academy) Time & Place: M330 Room: Conf Center D

Learning Organizations and Leadership in Military Units: A Preliminary Analysis Raffaella Di Schiena (Royal military academy), Geert Letens (Royal Military Academy), Jennifer Farris (Texas Tech University), Eileen Van Aken (Virginia Tech) Abstract No. 285 *

A Mixed Methods Case Study of Lean Implementation Climate Doug Hummer (North Carolina State University), Lukasz Mazur (University of North Carolina ), KeAnne Hoeg Abstract No. 534

Creating a Lean and Green Business System – Techniques for Improving Profits and Sustainability Keivan Zokaei (S A Partners LLP) Abstract No. 1067 *

www.iienet.org/annual | 65 65

ISERC Sessions

Track: IE in the Military Session: Supply Chain & Logistics Chair(s): Paul Goethals (United States Military Academy) Time & Place: M330 Room: Conference 3

Modeling Priority Service and Repositioning Strategies Jennifer Pazour (Univesity of Central Florida), Debjit Roy (Indian Institute of Management) Abstract No. 111 *

Routing Vehicles with a Mandatory Escort Requirement in Risk Zones Ruben Dario Yie Pinedo (State University of New York at Buffalo), Rajan Batta (University at Buffalo (SUNY)), Moises Sudit (University at Buffalo) Abstract No. 926

Track: Social, Environmental and Sustainability Session: Sustainable Urban Areas and Green Building Chair(s): Olivia Moreno (The University of Texas at El Paso) Time & Place: M330 Room: Conference 4/5

Optimization to Select Energy Efficient Building Options John Dickson (University of Texas at Arlington), Jay Rosenberger (The University of Texas Arlington), Victoria Chen (University of Texas at Arlington), Pin Kung (University of Texas at Arlington), Anthony Robinson (Axis Design-Build, Inc. and Southern Methodist University, Dallas TX) Abstract No. 956

An Integer Programming model for controlling urban sprawl Piyush Kumar (University of Texas at Arlington), Jay Rosenberger (The University of Texas Arlington), Ardeshir Anjomani (University of Texas at arlington) Abstract No. 923

Optimizing Building Design for Daylighting Performance Benjamin Futrell (University of North Carolina - Charlotte), Ertunga Ozelkan (The University of North Carolina at Charlotte) Abstract No. 1251

Towards Domotic Social Interest Housing Gabriela de Jesús Córdova Lara (Autonomous University of Zacatecas), María De León Sigg (Autonomous University of Zacatecas), Juan Luis Villa Cisneros (Autonomous University of Zacatecas), Manuel Alberto Perez Coutiño (Autonomous University of Puebla), Sodel Vazquez Reyes (Autonomous University of Zacatecas) Abstract No. 1401

Energy Efficiency and Conservation at The University of Texas at El Paso Olivia Moreno (The University of Texas at El Paso), Heidi Taboada Jimenez (The University of Texas at El Paso) Abstract No. 1247

Track: Production Planning and Scheduling Session: Production Planning and Scheduling 1 Chair(s): Purushothaman Damodaran (Northern Illinois University) Time & Place: M330 Room: Conference 6

Minimizing Makespan in a No-Wait Flow Shop using ACO Miguel Rojas-Santiago (Universidad del Norte), Shanthi Muthuswamy (Northern Illinois University), Purushothaman Damodaran (Northern Illinois University), Mario C. Velez-Gallego (Universidad EAFIT) Abstract No. 94 *

A Simulation Model for Optimizing the Material Flow at an Electronics Manufacturing Firm Purushothaman Damodaran (Northern Illinois University), Hossein Abdollahnejad Barough (Northern Illinois University), Salil Pradhan (Brocade Communications) Abstract No. 800 *

| Welcome to the IIE Annual Conference & Expo 201366

ISERC Sessions

Predicting Order Picking Times at a Warehouse Maria Hulett (University of Miami), Purushothaman Damodaran (Northern Illinois University) Abstract No. 891 *

Track: Engineering Management Session: Healthcare Engineering Management Chair(s): Shaghayegh Norouzzadeh (State University of New York at Binghamton) Time & Place: M330 Room: Conference 7

An Approximate Dynamic Programming Model for Open Access Patient Scheduling Kelli Crosby (Binghamton University), Ahmad Obeidat (State University of New York at Binghamton), Sang Won Yoon (State University of New York at Binghamton) Abstract No. 958 *

Multi-clinic Healthcare Facility Process Flow Redesign Using Discrete Event Simulation Wen Cao (State University of New York at Binghamton ), Srikanth Poranki (UHS Hospitals), Sang Won Yoon (State University of New York at Binghamton), Mohammad Khasawneh (State University of New York at Binghamton), Krishnaswami Srihari (State University of New York, Binghamton) Abstract No. 959 *

An Overlapping Appointment Scheduling Model with Stochastic Service Time Kelsey Anderson (State University of New York at Binghamton), Sang Won Yoon (State University of New York at Binghamton), Mohammad Khasawneh (State University of New York at Binghamton), Krishnaswami Srihari (State University of New York, Binghamton) Abstract No. 960 *

Track: Service Systems Session: Service Systems - Health Care I Chair(s): David Neyens (University of Washington) Time & Place: M330 Room: Conference 8+9

An effective, nonintrusive approach to time studies in health care Susan Robinson (Clemson University), David Neyens (Clemson University), Ashley K. Childers (Clemson University) Abstract No. 851

Assessing Hospital Employee Needs for Personal Health Information Management Susan Robinson (Clemson University), David Neyens (Clemson University), Ashley K. Childers (Clemson University) Abstract No. 852

Statistical Analysis for Human Capital Forecasting in Multi-purpose Research Organization Xiaojuan Zhu (University of Tennessee), Gurudatt Bhaskar Sanil (University of Tennessee), Minoo Mardookhy (University of Tennessee), Rupy Sawhney (The University of Tennessee), Xiaocun Sun (University of Tennessee) Abstract No. 831 *

Track: Supply Chain and Logistics Session: Managing Uncertainty in Humanitarian Supply Chain and Logistics Systems Chair(s): Ashlea Milburn (University of Arkansas) Time & Place: M330 Room: Flamboyan

Robust Pre-positioning for Disaster Response with Uncertain Demand and Gifts-in-kind Elijah Ingram (Kansas State University), Jessica Heier Stamm (Kansas State University) Abstract No. 208 *

How Social Media Information Is Changing Disaster Relief Routing Plans Emre Kirac (University of Arkansas), Ashlea Milburn (University of Arkansas), Clarence Wardell (CNA Safety & Security) Abstract No. 209 *

www.iienet.org/annual | 67 67

ISERC Sessions

Stockpiling Ventilators for Pandemic Influenza Hsin-Chan Huang (The University of Texas at Austin), Ozgur Araz (University of Nebraska Medical Center), Paul Damien (The University of Texas), David Morton (The University of Texas at Austin), Lauren Meyers (The University of Texas at Austin) Abstract No. 295 *

Track: Computers and Information Systems Session: IT Enabled Design of Products and Systems Chair(s): Janis Terpenny (Iowa State University) Time & Place: M330 Room: Flamingo A

Ontology Development and Optimization for Data Integration and Knowledge Management Liyu Zheng (Iowa State University), Xiaomeng Chang (MicroStrategy, Inc.), Janis Terpenny (Iowa State University) Abstract No. 230 *

An Integrated Simulation and Game-theoretic Framework for Supply Chain Competitions Dong Xu (The University of Arizona), Sai Srinivas Nageshwaraniyer (The University of Arizona), Young-Jun Son (The University of Arizona) Abstract No. 232 *

An Approach to Automated Concept Generation through Latent Semantic Indexing Kerry Poppa (CyDesign), Ryan Arlitt (Oregon State University ), Robert Stone (Oregon State University ) Abstract No. 256 *

Improving Information Alignment and Dynamic Allocation of IT Functions Barrett Caldwell (Purdue University) Abstract No. 326 *

Track: Emerging Frontiers in IE Research Session: EFIE: Emerging Research Trends in Manufacturing Chair(s): Jianjun Shi (Georgia Institute of Technology) Time & Place: M330 Room: Flamingo B

Emerging Research Trends in Advanced Manufacturing Ronald Askin (Arizona State University), Abhijit Deshmukh (Industrial Engineering, Purdue University), Soundar Kumara (The Pennsylvania State University), Richard Wysk (North Carolina State University) Abstract No. 1502

Track: Manufacturing and Design Session: Additive Manufacturing Processes Chair(s): Denis Cormier (Rochester Institute of Technology) Time & Place: M330 Room: Flamingo C

Developments In Printed Devices and Materials Denis Cormier (Rochester Institute of Technology), Chaitanya Mahajan (Rochester Institute of Technology), Swaroop Yerasi (Rochester Institute of Technology) Abstract No. 125

A Comparative Study of Rapid Prototyping Systems CHEN-YU LIU (University of Missouri), Michael Klote (Faculty), Luis Occeña (University of Missouri) Abstract No. 799

3D Printing of ABS with Heated Bed: Experimental Analysis based on Part Features Guha Prasanna Manogharan (North Carolina State University), Gordon Bergfors (ShopBot Tools Inc.), Richard Wysk (North Carolina State University) Abstract No. 980

| Welcome to the IIE Annual Conference & Expo 201368

ISERC Sessions

An Alternative 3D Printing Mechanism Using Pre-built Volumetric Elements Audrey Stipe (The University of Texas at San Antonio), Vladimir Santalov (UTSA), Francisco Balandrano (University of Texas at San Antonio), Hung-da Wan (University of Texas at San Antonio) Abstract No. 1136

Track: Modeling and Simulation Session: Agent-Based Simulation Chair(s): Sean Barnes (University of Maryland) Time & Place: M330 Room: Flamingo D

Using a Pandemic Disease Spread Simulation Model to Make Deterministic, Graph-Theory Based Vaccine Decisions Mario Ventresca (University of Toronto), Dionne Aleman (University of Toronto) Abstract No. 260 *

Early Detection of Bioterrorism: Monitoring Disease Diffusion Through Multilayered Networks Inbal Yahav (Bar-Ilan University), Sean Barnes (University of Maryland), Bruce Golden (University of Maryland), Edward Wasil (American University) Abstract No. 157 *

Track: Quality and Reliability Engineering Session: Reliability and Maintenance for Dependent Failure Processes and Dependent Components Chair(s): Sanling Song (Rutgers University), Koosha Rafiee (University of Houston), Koosha Rafiee (University of Houston) Time & Place: M330 Room: Guayacan

A Random-Coefficient Degradation Model for Heterogeneous Populations Yizhen Ji (Ohio University), Tao Yuan (Ohio University) Abstract No. 578 *

Bayesian Modeling of Multi-state Hierarchical Systems with Multi-level Information Aggregation Mingyang Li (The University of Arizona), Jian Liu (The University of Arizona) Abstract No. 579 *

Expected Reliability For Systems Under Uncertain Usage Environment With Multiple Dependent Competing Failure Processes Nida Chatwattanasiri (Rutgers University), Sanling Song (Rutgers University), David Coit (Rutgers University), Qianmei Feng (University of Houston) Abstract No. 1466

Reliability Analysis for Implanted Multi-Stent Systems with Stochastic Dependent Competing Risk Processes Ali Arab (IIE member), Elias Keedy (University of Houston), Qianmei Feng (IIE member), Sanling Song (Rutgers University), David Coit (Rutgers University) Abstract No. 1012

Track: Supply Chain and Logistics Session: CELDi - Logistics and Distribution - I Chair(s): James Noble (University of Missouri) Time & Place: M330 Room: Maguey

Industrial Engineering-Based Productivity Improvements at TriVantage Chirag Ojha (Clemson University), Scott Mason (Clemson University), Achieng Adongo (Clemson University), Kevin Taaffe (Clemson University) Abstract No. 77 *

A Proactive International Shipment Consolidation Strategy Na Deng (U of Missouri), Wooseung Jang (University of Missouri), James Noble (University of Missouri) Abstract No. 80 *

www.iienet.org/annual | 69 69

ISERC Sessions

Collaborative Freight Transportation to Improve Efficiency and Sustainability Steven Roesch (Virginia Tech), Kimberly Ellis (Virginia Tech), Russell Meller (University of Arkansas) Abstract No. 115 *

Track: Energy Session: Clean Energy & Renewables-I Chair(s): Cerry Klein (University of Missouri) Time & Place: M330 Room: Salon del Mar A

Exploratory Data Analysis for Hydro-thermal Scheduling Alla Kammerdiner (New Mexico State University) Abstract No. 1406

Renewable Energy System Optimization for a Rural Farm in the state of Morelos, Mexico Jose Francisco Espiritu Nolasco (The University of Texas at El Paso), Raul Lopez (The University of Texas at El Paso), Nicolas Lopez (The University of Texas at El Paso) Abstract No. 1441

A Woody Biomass Based Energy Logistics Systems Cerry Klein (University of Missouri), Wooseung Jang (University of Missouri), Zhongwei Yu (University of Missouri) Abstract No. 642

Modeling of Renewable Energy Resources and Effects on CO2 Emissions GULSEVI BASAR (COLORADO STATE UNIVERSITY - PUEBLO), Leonardo Bedoya-Valencia (Colorado State University - Pueblo) Abstract No. 872

Track: Human Factors and Ergonomics Session: Human and Workplace Assessment Chair(s): Steven Jiang (North Carolina A&T State University) Time & Place: M330 Room: Salon del Mar B

Quantitative Modeling of Human Interaction with Haptic-controlled Excavators Benjamin Osafo-Yeboah (North Carolina A&T State University), Enio Frota (North Carolina A&T State University), Steven Jiang (North Carolina A&T State University), Celestine Ntuen (North Carolina A&T State University) Abstract No. 716

Adaptation of Industrial Engineering Tools to include Human Factors Judy Village (Ryerson University), Michael Greig (Ryerson University), Patrick Neumann (Ryerson University) Abstract No. 945

Effectiveness of Ergonomic Improvement and Quality Analysis on Workplace Productivity Zakia Farhana (University of Southern Mississippi), Mohammad Rahman (The University of Southern Mississippi), Faisal Mallum (University of Southern Mississippi) Abstract No. 1176

Evaluating the Effects of Urgency on Task Performance Tamika Gordon (Binghamton University), Kelli Crosby (Binghamton University), Mohammad Khasawneh (State University of New York at Binghamton) Abstract No. 1356

| Welcome to the IIE Annual Conference & Expo 201370

ISERC Sessions

Track: Engineering Education Session: Emerging Areas and Trends in IE Education Chair(s): David Claudio (Montana State University) Time & Place: M330 Room: Tropical A

Rapid Improvement Events Summer Internship Program: The Present and Future David Claudio (Montana State University), Carol Bischoff (Montana Hospital Association) Abstract No. 211 *

Measuring Intercultural Sensitivity in a Cohort of the UPRM IE REU students Saylisse Davila (University of Puerto Rico-Mayaguez), Viviana Cesani (University of Puerto Rico), Alexandra Medina-Borja (University of Puerto Rico at Mayaguez) Abstract No. 212 *

Complexity Metrics for Engineering Education: The Case of Automated Processes Lourdes A. Medina (University of Puerto Rico at Mayaguez), Marisol Colon (University of Puerto Rico at Mayaguez), Maricarmen Collet (University of Puerto Rico at Mayagüez), José Lopez (University of Puerto Rico at Mayaguez) Abstract No. 213 *

Designing an Interprofessional Course to Strengthen Engineering and Nursing Collaboration Linda Torma (Montana State University), David Claudio (Montana State University) Abstract No. 219 *

Track: Engineering Management Session: Systems of Systems Approach in Engineering Managment Chair(s): Wiljeana Glover (Massachusetts Institute of Technology) Time & Place: M330 Room: Tropical B

A System-of-Systems Engineering Approach For Management of Power & Energy Tareq Ahram (UCF) Abstract No. 1467 *

Identifying Inter-Office Social Capabilities to Develop SoS Capabilities: An Empirical Investigation Wiljeana Glover (Massachusetts Institute of Technology), George Rebovich Jr. (MITRE Corp.), Donna Rhodes (Massachusetts Institute of Technology) Abstract No. 1148

Describing Systems of Systems: A Preliminary Comparison of the Literature to Current State Practices Paolo Pagani (Università Carlo Cattaneo - LIUC), Wiljeana Glover (Massachusetts Institute of Technology) Abstract No. 1152

Track: Engineering Management Session: Management of Lean Implementation Chair(s): Hendrik Van Landeghem (Ghent University) Time & Place: M330 Room: Tropical C

A Management System for sustainable Lean Implementation Hendrik Van Landeghem (Ghent University), Karel Bauters (Ghent University), Veronique Limere (Ghent University) Abstract No. 117 *

Waste Analysis for Lean Systems Operations: a Preliminary Framework Cecilia Martinez (Clarkson University), Carmen Temblador (Tecnologico de Monterrey Campus Monterrey), Zamira Del Valle Barbosa (Instituto Tecnológico y de Estudios Superiores de Monterrey) Abstract No. 312 *

Development of Key Performance Indicators for Knowledge Management Amer Catic (Chalmers University of Technology), Durward Sobek (Montana State University) Abstract No. 501 *

www.iienet.org/annual | 71 71

ISERC Sessions

The Impacts of Kaizen Event Duration on Kaizen Success and Logistics James Natale (University of Akron), Ravi Uppal (University of Akron), Shengyong Wang (The University of Akron), Joyce Taylor (Lake Health), Mary Ogrinc (Lake Health) Abstract No. 608

Track: Lean Systems Session: Lean Systems Design Chair(s): Alok Verma (Old Dominion University) Time & Place: M500 Room: Ceiba

Axiomatic Design and Lean Process Improvement Walter Towner (Worcester Polytechnic Institute) Abstract No. 630 *

Leaning the way to Satisfy Customers: A Case Study Bernardo Villarreal (Universidad de Monterrey), Ana Gabriela Soto (Universidad de Monterrey), Melissa Rosselly (Universidad de Monterrey), Christian Rocha (Universidad de Monterrey) Abstract No. 16

An Enterprise Architecture Framework of a Lean Enterprise Transformation Gustavo Perez (Oklahoma State University) Abstract No. 1408

Leaning the Design Process Alok Verma (Old Dominion University), Guillaume Sturni (Lean Institute), Guillaume Sturni (Lean Institute) Abstract No. 358

Track: Operations Research Session: Applications of OR Chair(s): Evren Güney (Istanbul Arel University) Time & Place: M500 Room: Conf Center A

A Mathematical Model and Solution Techniques for the Influencer Selection Problem Evren Güney (Istanbul Arel University), Sami Ercan (Istanbul Arel University), Volkan Çak?r (Istanbul Arel University), Irem Düzdar (Istanbul Arel University) Abstract No. 812

Adaptive Metaheuristics with Genetic Social Network Patrick Wanko (North Carolina Agricultural & Technical State University), Paul Stanfield (North Carolina A&T State University) Abstract No. 1269

Track: Healthcare Systems Session: Sleep Apnea Chair(s): Paul Griffin (Penn State University) Time & Place: M500 Room: Conf Center B

VisOSA: Visualizing Obstructive Sleep Apnea Symptoms and Comorbidities Hui Yang (The Pennsylvania State University), Ravi Singareddy (The Pennsylvania State University College of Medicine), Ling Rothrock (The Pennsylvania State University), Soundar Kumara (The Pennsylvania State University) Abstract No. 646

Markov Models for Treatment Adherence in Obstructive Sleep Apnea Yuncheol Kang (Pennsylvania State University), Vittal Prabhu (Penn State), Amy Sawyer (Pennsylvania State University), Paul Griffin (Penn State University) Abstract No. 781

| Welcome to the IIE Annual Conference & Expo 201372

ISERC Sessions

Data Mining for Characterizing Obstructive Sleep Apnea Treatment Adherence Trends Yuncheol Kang (Pennsylvania State University), Vittal Prabhu (Penn State), Amy Sawyer (Pennsylvania State University), Paul Griffin (Penn State University) Abstract No. 792

Track: Healthcare Systems Session: Pandemics and Epidemics Chair(s): David Ben-Arieh (Kansas State University) Time & Place: M500 Room: Conf Center C

Using Spatial Games to model Human Mobility and Spread of Epidemics Zhao Songnian (Kansas State University ), Chih-Hang Wu (Kansas State University), David Ben-Arieh (Kansas State University) Abstract No. 268

A Real-Time Simulation Model for Pandemic Influenza Kari Kelton (University of Louisville), Sunderesh Heragu (University of Louisville) Abstract No. 759

Antiviral Resistance and Dynamic Treatment and Chemoprophylaxis of Pandemic Influenza Sandro Paz (University of South Florida / Pontificia Universidad Catolica del Peru), Alex Savachkin (University of South Florida) Abstract No. 1437

Assessing Infection Risk with Contact Networks and Spatio-temporal Activity Information Shengpeng Jin (University of Louisville), Suraj Alexander (University of Louisville), Yang Liu (Chrysler Group LLC) Abstract No. 225

Track: Engineering Management Session: Engineering Management in Healthcare - 2 Chair(s): David Claudio (Montana State University) Time & Place: M500 Room: Conf Center D

Scheduling Job Start Times for a Server with Sequence-Dependent Deteriorating Effects Eduardo Perez (Texas State University), Alex Ruiz-Torres (University of Puerto Rico) Abstract No. 214 *

User-centered Design for Medical Device Development Lourdes A. Medina (University of Puerto Rico at Mayaguez) Abstract No. 215 *

Improving On-time Starts of First-Round Surgeries Virginia Cosgriff (Mayo Clinic Health System - Franciscan Healthcare), Rafael Calheiros (Montana State University), Murilo Gerdes (Montana State University), Bianca Ribeiro (Montana State University), David Claudio (Montana State University) Abstract No. 220 *

Track: IE in the Military Session: Performance Metrics / Human Interaction Chair(s): Paul Goethals (United States Military Academy) Time & Place: M500 Room: Conference 3

Impact of Manpower Reduction at the Tanker Airlift Control Center Megan Leiter (Air Force Institute of Technology), J.O. Miller (Air Force Insitute of Technology), Raymond Hill (Air Force Institute of Technology) Abstract No. 289

Using Static CMMI Guidelines to Statistically Control Peer Review Costs Constantine Koursaris (Embry-Ridlle Aeronautical University), Richard Welch Abstract No. 599

www.iienet.org/annual | 73 73

ISERC Sessions

A Quality Assessment Approach to Unit Readiness Natalie Scala (United States Department of Defense), Paul Goethals (United States Military Academy) Abstract No. 24 *

Track: Production Planning and Scheduling Session: Production Planning and Scheduling Chair(s): Evangelos Angelidis (Bundeswehr University Munich ) Time & Place: M500 Room: Conference 4/5

Simulation-based Optimization for Complex Assembly Lines with Multi-skilled Resources Evangelos Angelidis (Bundeswehr University Munich ), Sebastian Carl (Dresden University of Technology, Germany), André Naumann (Dresden University of Technology), Daniel Bohn (University of the Federal Armed Forces Munich), Oliver Rose (University of the Bundeswehr Munich) Abstract No. 925

Stochastic Capacitated Lot Sizing subject to Maximum Acceptable Risk Level Bulent Erenay (Ohio University), Gokhan Egilmez (Ohio University), Gürsel Süer (Ohio University) Abstract No. 1381

Track: Production Planning and Scheduling Session: Bayesian modeling of demand uncertainty Chair(s): Gürsel Süer (Ohio University) Time & Place: M500 Room: Conference 6

Human Capital Predictive Model Xiaojuan Zhu (University of Tennessee), Gurudatt Bhaskar Sanil (University of Tennessee), Minoo Mardookhy (University of Tennessee), Rupy Sawhney (The University of Tennessee) Abstract No. 419

Optimization of Physical Distribution of Plant using Cells Mónica Marcela Umbacía Carvajal (Universidad Libre - Colombia), Oscar Mayorga Torres (Universidad Libre) Abstract No. 881

Scheduling of bill of material with common parts and setup time Arkopaul Sarkar (Ohio University), Gürsel Süer (Ohio University), Christopher Spegal (Ohio University) Abstract No. 1410

Track: Engineering Management Session: Risk Assessment and Mitigation Chair(s): Susan Murray (Missouri S&T ) Time & Place: M500 Room: Conference 7

STAMP – Holistic System Safety Approach or Just Another Risk Model? Susan Murray (Missouri S&T ), Hanan Altabbakh (Missouri S&T) Abstract No. 987 *

Failure Prevention Through the Cataloging of Successful Risk Mitigation Strategies Daniel Krus (Missouri University of Science and Technology), Katie Grantham (Missouri University of Science and Technology) Abstract No. 989 *

Functional Complexity Impact on Engineering Design Project Risk Indicators Rachel Yim (Oregon State University), Jason Castaneda (Oregon State University), Toni Doolen (Oregon State University), Richard Malak (Texas A&M University), Irem Tumer (Oregon State University) Abstract No. 798

| Welcome to the IIE Annual Conference & Expo 201374

ISERC Sessions

Track: Service Systems Session: Stochastic Models and Applications in Medical Decision MakingChair(s): Muge Capan (North Carolina State University) Time & Place: M500 Room: Conference 8+9

Optimal Cardiac Lead Maintenance Lisa Maillart (University of Pittsburgh), Anahita Khojandi (University of Pittsburgh), Oleg Prokopyev (University of Pittsburgh) Abstract No. 166 *

Simulation Based Analysis of Scheduling Decisions in an Outpatient Clinic Gokce Akin (North Carolina State University), Julie Simmons Ivy (North Carolina State University), Thomas Rohleder (Mayo Clinic), Todd R. Huschka (Mayo Clinic, Rochester, MN) Abstract No. 564 *

Kolmogorov-Smirnov Statistic-Based Optimization for Observational Causal Inference Longsheng Sun (University at Buffalo (SUNY)), Murat Kurt (University at Buffalo, SUNY), Alexander Nikolaev (University at Buffalo (SUNY)) Abstract No. 565 *

Optimizing Rapid Response Decisions to Improve Inpatient Care Muge Capan (North Carolina State University), Julie Simmons Ivy (North Carolina State University) Abstract No. 566 *

Track: Supply Chain and Logistics Session: Green Supply Chain Management Chair(s): Dincer Konur (Missouri University of Science and Technology) Time & Place: M500 Room: Flamboyan

Overland Move Planning for Intermodal Logistics with Order Uncertainty Zehra Melis Teksan (University of Florida), Tianyi Pan (University of Florida), Ernesto Garcia (Crowley Maritime Corporation), Joseph Geunes (University of Florida), Joseph Hartman (University of Florida) Abstract No. 97 *

A Pathway to Green Cities: Quantifying Sustainable Development in Urban Neighborhoods Aslihan Karatas (University of Illinois at Urbana Champaign) Abstract No. 119 *

Carbon Sensitive Deterministic Inventory Control Models with Truckload Transportation Brian Schafer (Missouri University of Science and Technology), Dincer Konur (Missouri University of Science and Technology), Ivan Guardiola (Missouri University of Science and Technology) Abstract No. 355 *

Track: Engineering Economy Session: Engineering Economy Division Town Hall Meeting Chair(s): Gillian Nicholls (University of Alabama in Huntsville) Time & Place: M500 Room: Flamingo A

Track: Tutorials Session: Approximate Dynamic Programming Chair(s): Jeffrey Herrmann (University of Maryland) Time & Place: M500 Room: Flamingo B

Approximate Dynamic Programming using Math Programming Dan Adelman (The University of Chicago) Abstract No. 1470 *

www.iienet.org/annual | 75 75

ISERC Sessions

Track: Manufacturing and Design Session: Biomedical Manufacturing - V Chair(s): Timothy Horn (North Carolina State University) Time & Place: M500 Room: Flamingo C

Optimized 3D Design and 3D Hybrid Bioprinting Bahattin Koc (Sabanci University), Can Kucukgul (Sabanci University), Saime Burce Ozler (Sabanci University), Hacer Ezgi Karakas (Sabanci University), Devrim Gozuacik (Sabanci University) Abstract No. 1336

Transforming Regenerative Medicine Procedures into Manufacturing Processes Peter Prim (NC State University), Steven Jackson (North Carolina State University), Paul Cohen (NC State University), Richard Wysk (North Carolina State University), Yuan-Shin Lee (North Carolina State University), James Kim (Wake Forest University), Hyun-Wook Kang (Wake Forest University), John Jackson (Wake Forest Institute for Regenerative Medicine), Sang Jin Lee (Wake Forest Institute for Regenerative Medicine), James Yoo (Wake Forest Institute for Regenerative Medicine), Anthony Atala (Wake Forest Institute for Regenerative Medicine) Abstract No. 1142

Patient Specific, Transcutaneous Implants for the Attachment of Prosthetic Limbs Timothy Horn (North Carolina State University), Ola Harrysson (North Carolina State University), Denis Marcellin-Little (North Carolina State University), Duncan Lascelles (North Carolina State University College of Veterinary Medicine), Joanne Tuohy (North Carolina State University College of Veterinary Medicine), Harvey West (North Carolina State University), Caroline Webster (North Carolina State University Department of Industrial and Systems Engineering) Abstract No. 1183

Track: Modeling and Simulation Session: Simulation and Statistics Chair(s): Kenneth Hutchison (Pennsylvania State University) Time & Place: M500 Room: Flamingo D

Automotive Assembly Line Production Loss Prediction Based on ARMA-ANN Model Annamalai Pandian (University of Wisconsin-STOUT), Ahad Ali (Lawrence Technological University) Abstract No. 172

Beating the curse of dimensionality through manageable experiments Kasandra Ramirez (University of Puerto Rico at Mayaguez), Mauricio Cabrera-Ríos (University of Puerto Rico, Mayaguez Campus) Abstract No. 1038

The search for experimental design with tens of variables: preliminary ideas and results Yaileen Mendez (University of Puerto Rico Mayaguez), Kasandra Ramirez (University of Puerto Rico at Mayaguez), Mauricio Cabrera-Ríos (University of Puerto Rico, Mayaguez Campus) Abstract No. 895

Nonparametric Methods for Forecasting the Cox Process Kenneth Hutchison (Pennsylvania State University), Thomas Willemain (Professor) Abstract No. 823

Track: Quality and Reliability Engineering Session: Design of Experiments and Robust Design Chair(s): Alex Gutman (AFIT Center for Operational Analysis) Time & Place: M500 Room: Guayacan

Large Screening Experiments: An Overview of Supersaturated Designs for Practitioners Alex Gutman (AFIT Center for Operational Analysis), Edward White (Air Force Institute of Technology), Raymond Hill (Air Force Institute of Technology) Abstract No. 602

| Welcome to the IIE Annual Conference & Expo 201376

ISERC Sessions

Minimum Number of Runs for 2^k Factorial Design in Blocks Hsiao-Shen (Jacob) Tsao (San Jose State University), Minnie Patel (San Jose State University) Abstract No. 1371

Reliability-based Robust Design of Multifunctional Material Sensing Systems for Failure Diagnostics and Prognostics Abdulaziz Almaktoom (Wichita State University), Zequn Wang (Wichita State University), Pingfeng Wang (Wichita State University) Abstract No. 871

Conditional Expectation and Variability in the Industrial Problem solution Armando Mares Castro (CIATEC, A. C. (Picyt), Universidad Tecnológica de León), Jorge Domínguez Domínguez (CIMAT unidad Aguascalientes) Abstract No. 1327

Track: Supply Chain and Logistics Session: Logistics Network Optimization Chair(s): Funda Samanlioglu (Kadir Has University) Time & Place: M500 Room: Maguey

Optimizing Inventory Levels in a Serial Supply Chain considering Multiple Suppliers and Transportation Costs Abraham Mendoza (Universidad Panamericana), José Ventura (The Pennsylvania State University ), Subramanian Pazhani (The Pennsylvania State University) Abstract No. 231

Three-phase Heuristic for Inventory Routing Problem Subramanian Pazhani (The Pennsylvania State University), Ramkumar N (JDA Software India Pvt Ltd.), Narendran T T (Indian Institute of Technology Madras), Ganesh K (McKinsey Knowledge Center India Pvt Ltd) Abstract No. 156

Plan of Horizontal Integration Logistics in a Plastic Sector Company Oscar Mayorga Torres (Universidad Libre), Luisa Carolina Velandia Sarmiento (Student) Abstract No. 1440

Location-Routing Decisions in an Earthquake Relief Network Funda Samanlioglu (Kadir Has University), Yaprak Kucuk (Kadir Has University), Kubra Gunes (Kadir Has University), Fahriye Karabak (Kadir Has University) Abstract No. 318

Track: Construction Research Session: Ergonomics and Safety in Construction Chair(s): Fereydoun Aghazadeh (Louisiana State University) Time & Place: M500 Room: Salon del Mar A

The Impact of Sign Placement and Merge Type on Driving Behavior in Construction Zones Mahmoud Shakouri (Louisiana State University), Karthy Punniaraj (Louisiana State University), Laura Hughes Ikuma (Louisiana State University), Fereydoun Aghazadeh (Louisiana State University) Abstract No. 353

Factor Analysis of Fatal Occupational Accidents in Construction Industry, 2003-2011 Kaveri Thakur (University of Tennessee), Rupy Sawhney (The University of Tennessee) Abstract No. 769

Usability and Evaluation of Lighting Systems for Overhead Guide Signs Mohammed Obeidat (Kansas state university), Margaret Joanna Rys (Kansas State University), Eugene Russell (Kansas State University) Abstract No. 1213

www.iienet.org/annual | 77 77

ISERC Sessions

Usability Testing a GA Assistant for Crowdsourcing Warning Symbol Designs Michelle Kringen (South Dakota School of Mines and Technology), Adam Piper (South Dakota School of Mines & Technology) Abstract No. 1312

Track: Emerging Frontiers in IE Research Session: NSF Program Manager Office Hours Chair(s): Victor Wai Kin Chan (Rensselaer Polytechnic Institute) Time & Place: M500 Room: Salon del Mar B

Track: Engineering Education Session: Assessing Learning Chair(s): John Jackman (Iowa State University) Time & Place: M500 Room: Tropical A

Comparing Undergraduate Students’ Cognitive Complexity and Motivation to Learn Kelsey Dolan (Industrial Engineering), Ann Perz (Nursing), Sara McComb (Purdue University), Jane Kirkpatrick (Nursing) Abstract No. 50 *

Modeling Expertise Development in Undergraduate Engineering Education Jeremi London (Purdue University), Barrett Caldwell (Purdue University), Kelly Patsavas (Purdue University) Abstract No. 606

A study of performance rating process for assessing student learning Timothy Chow (Rose-Hulman Institute of Technology), M. Affan Badar (Indiana State University) Abstract No. 825

What Contributes to Problem Complexity in Engineering Problem Solving? John Jackman (Iowa State University), LeAnn Faidley (Wartburg College), Matt Hagge (Iowa State University), Gloria Starns (Iowa State University), Stephen Gilbert (Iowa State University) Abstract No. 1122

Track: Engineering Management Session: SEMS Student Paper Competition Chair(s): Elizabeth Cudney (Missouri S&T), Janaina Costa Time & Place: M500 Room: Tropical B

Understanding the Design Impacts Among LEED Certification Credits William Gillis (Missouri University of Science and Technology) Abstract No. 1500 *

Systems Engineering Application in an Engineering Design Build Firm Carl Kirpes (Iowa State University) Abstract No. 1499 *

An Agile Distribution Strategy for Improving On Time Delivery Victoria Cabrera Abstract No. 1498 *

| Welcome to the IIE Annual Conference & Expo 201378

ISERC Sessions

Track: Engineering Management Session: Sustaining Organizational Transformations Chair(s): Michael Testani (IBM Enterprise Learning, IBM Corporation) Time & Place: M500 Room: Tropical C

Ergonomic Risk Reduction to Enhance Lean Transformation Faisal Aqlan (State University of New York at Binghamton), Sarah Lam (State University of New York at Binghamton), Michael Testani (IBM Enterprise Learning, IBM Corporation), Sreekanth Ramakrishnan (IBM Corporation) Abstract No. 833 *

A Methodology for Assessing the Adoption Rates of an Organization’s Lean Transformation Venkatesh Arasanipalai Raghavan (State University of New York, Binghamton), Sreekanth Ramakrishnan (IBM Corporation), Michael Testani (IBM Enterprise Learning, IBM Corporation), Sarah Lam (State University of New York at Binghamton), Krishnaswami Srihari (State University of New York, Binghamton) Abstract No. 835 *

Leader-centric Hoshin Planning: A Systemic Approach for Sustaining an Enterprise-wide Lean Transformation Michael Testani (IBM Enterprise Learning, IBM Corporation), Sreekanth Ramakrishnan (IBM Corporation) Abstract No. 837 *

A Framework to Utilize Business Analytics to Sustain a Lean Transformation Sathishkumar Selvaraju (IBM), Chelsie Petersen (University of St. Thomas ) Abstract No. 839 *

Track: Lean Systems Session: Lean Six Sigma Chair(s): Janet Sanders (East Carolina University) Time & Place: T800 Room: Ceiba

Impact of Management Theories X, Y, and Z on Lean Six Sigma Janet Sanders (East Carolina University) Abstract No. 179 *

Integrating Lean and Six Sigma for a Holistic Process Performance Improvement Cecilia Martinez (Clarkson University), Carmen Temblador (Tecnologico de Monterrey Campus Monterrey), Myrna Flores (CEMEX) Abstract No. 699 *

Track: Operations Research Session: Multiobjective Optimization Chair(s): Ahmed Bakhsh (University of Central Florida) Time & Place: T800 Room: Conf Center A

Using Clustering Analysis for Decision-Making with Multiple Stochastic Objectives Ahmed Bakhsh (University of Central Florida), Christopher Geiger (University of Central Florida) Abstract No. 18

Bicriteria Optimization Problem: an Artificial Neural Network approach Karla Ortiz-Muñiz (University of Puerto Rico at Mayagüez), Cesar Rivera (University of Puerto Rico Mayaguez Campus), Mauricio Cabrera-Ríos (University of Puerto Rico, Mayaguez Campus) Abstract No. 950

Multi-Objective Generation Expansion Planning Problem Optimization Using Pareto Uncertainty Index Saltuk Selcuklu (Rutgers University), David Coit (Rutgers University), Frank Felder (Rutgers University), Mark Rodgers (Rutgers University) Abstract No. 1200

www.iienet.org/annual | 79 79

ISERC Sessions

A Sweeping Cones Technique for Post-Pareto Analysis victor carrillo (university of Texas at El Paso), Heidi Taboada Jimenez (The University of Texas at El Paso) Abstract No. 1288

Track: Operations Research Session: Energy Applications of Operations Research Chair(s): K. Jo Min (Iowa State University) Time & Place: T800 Room: Conf Center B

A Multi-Objective MIP Model and Decomposition Algorithm for Biofuel Production Halil Ibrahim Cobuloglu (Wichita State University), Esra Buyuktahtakin (Wichita State University) Abstract No. 1286

A Statistical Approach to Modeling and Forecast of the Building Energy Consumption Seyed A. Vaghefi (Rutgers University), Mohsen Jafari (Department of Industrial and System Engineering Rutgers, the State University of New Jersey ), Jianmin Zhu (Department of Industrial and System Engineering Rutgers, the State University of New Jersey ), Jack Brouwer (University of California, Irvine ), Yan Lu (Siemens Corporate Research) Abstract No. 1425

Track: Healthcare Systems Session: Emergency Department Chair(s): Jordan Peck (Veterans Health Administration) Time & Place: T800 Room: Conf Center C

A Simulation Case Study for Developing Pediatric Emergency Department Byungjoon Kim (East Carolina University) Abstract No. 87

Resource-centric Patient Flow Performance Comparisons in the Emergency Department Yunfei He (The Pennsylvania State University), Ting Lei (The Pennsylvania State University), Gul E. Okudan Kremer (The Pennsylvania State University) Abstract No. 524

Allocation of Potential Urgent Patients in ER to Reduce Waiting Kristina Padilla (New Mexico State University), Yu-Li Huang (New Mexico State University) Abstract No. 1010

Track: Healthcare Systems Session: Electronic Health Records Chair(s): Sharie Falan (Western Michigan University) Time & Place: T800 Room: Conf Center D

Evaluating the Impact of EHR Interoperability Using a Simulation Model Yuan Zhou (University at Buffalo), Jessica Ancker (Weill Cornell Medical College), Mandar Upahdye (University at Buffalo), Nicolette McGeorge (University at Buffalo), Theresa Guarrera (University at Buffalo), Sudeep Hegde (University at Buffalo), Peter Crane (University of Rochester), Rollin Fairbanks (MedStar Institute for Innovation, MedStar Health), Ann Bisantz (University at Buffalo), Rainu Kaushal (Weill Cornell Medical College), Li Lin (University at Buffalo) Abstract No. 517

Electronic Health Record, Information, and Patients: Where Do We Go From Here? Sharie Falan (Western Michigan University), Bernard Han (Western Michigan University) Abstract No. 535

Investigate Relationship Between EHR Design, Implementation and Physician Work Impact Fei Li (University of Southern California), Shinyi Wu (University of Southern California) Abstract No. 1042

| Welcome to the IIE Annual Conference & Expo 201380

ISERC Sessions

Track: Homeland Security Session: Network Interdiction 1 Chair(s): Kelly Sullivan, Kelly Sullivan (University of Arkansas) Time & Place: T800 Room: Conference 3

A Robust Sensor Covering and Communication Problem Cole Smith (University of Florida), Andrew Romich (University of Florida), George Lan (University of Florida) Abstract No. 251 *

A Parallel Approach for Solving Shortest Path Network Interdiction Problems Dia St. John (University of Arkansas), Chase Rainwater (University of Arkansas), Cole Smith (University of Florida) Abstract No. 271 *

Geographical Interdiction of a Maximum Flow Network Kelly Sullivan (University of Arkansas), Cole Smith (University of Florida) Abstract No. 272 *

Track: Social, Environmental and Sustainability Session: Green Transportation Chair(s): Faisal Mallum (University of Southern Mississippi) Time & Place: T800 Room: Conference 4/5

Defining Aspects of Hazardous Material Transport Routing Matthew Norton (knight Transportation), Mohammad Rahman (The University of Southern Mississippi), Anthony Portera (University of Southern Mississippi) Abstract No. 1339

Los Angeles Congested Corridor Study and Comparisons with TTI Estimates Qian An (University of Southern California), Peter Gordon (University of Southern California), James Moore (University of Southern California), Ugur Demiryurek (University of Southern California), Cyrus Shahabi (University of Southern California) Abstract No. 1048

A Sustainability Analysis between Transportation Logistic and Global Trade Mohammad Rahman (The University of Southern Mississippi), Faisal Mallum (University of Southern Mississippi), Chad Miller (University of Southern Mississippi) Abstract No. 1053

Transportation Mode Selection Tradeoffs between Green Transportation and Costs Mohammad Rahman (The University of Southern Mississippi), Faisal Mallum (University of Southern Mississippi), MD Sarder (University of Southern Mississippi), Chad Miller (University of Southern Mississippi), Tulio Sulbaran (University of Southern Mississippi) Abstract No. 1386

Track: Engineering Management Session: Applications in Decision Analysis Chair(s): Paul Goethals (United States Military Academy) Time & Place: T800 Room: Conference 7

Assessing Qualitative Desirability Functions Natalie Scala (United States Department of Defense), Paul Goethals (United States Military Academy) Abstract No. 154

Synergistic Application of AHP and Trust Matrix for Collaborative Design Decision Making Junfeng Ma (The Pennsylvania State University), Hamza Adeinat (The Pennsylvania State University), SangJin Kweon (Penn State University), Jennifer Mines (Penn State University), Gul Okudan (The Pennsylvania State University) Abstract No. 569

www.iienet.org/annual | 81 81

ISERC Sessions

An Analytic Hierarchy Process Approach to Engineering Outreach Decisions Eric Specking (University of Arkansas), Rufaidah Almaian (University of Arkansas), Heather Nachtmann (University of Arkansas) Abstract No. 713

Track: Service Systems Session: Airline Service Systems Chair(s): Amy Cohn (University of Michigan), Jeremy Castaing (UM Student) Time & Place: T800 Room: Conference 8+9

Using Mathematical Programming to Reduce Airline Gate Blockage Ishan Mukherjee (University of Michigan), Jeremy Castaing (UM Student), Amy Cohn (University of Michigan) Abstract No. 709

Analysis and forecasting of International flights arriving in the United States Isaac Atuahene (University Of Tennessee), Rolando Acosta-Amado (Universidad Pontificia Bolivariana Seccional Bucaramanga), Philip Appiah Kubi (Ohio University), Rupy Sawhney (The University of Tennessee), Girish Upreti (University of Tennessee) Abstract No. 1204

Track: Quality and Reliability Engineering Session: Methods for Reliability and Warranty Analysis Chair(s): M. Affan Badar (Indiana State University) Time & Place: T800 Room: Flamboyan

Copula-based modeling & Computational Solutions of Warranty Cost Management Problems Sonia Bandha (New Jersey Institute of Technology), Manish C. Bhattacharjee (Department of Mathematical Sciences), David J. Horntrop (Department of Mathematical Sciences) Abstract No. 999

Modeling Failure Rates with a Two-Sided Power Distribution Christopher Mance (School of Industrial and Systems Engineering, University of Oklahoma), Kash Barker (University of Oklahoma) Abstract No. 108

A Study of Part Type Failures of Common Platform Appliances Nathan Baker (Indiana State University), M. Affan Badar (Indiana State University) Abstract No. 473

A Reliability Study for Pump Stations in Louisville, KY Seyed Soroush Moeini (University of Louisville), Lihui Bai (University of Louisville), John S Usher (Associate Dean for Administration, Department of Industrial Engineering, University of Louisville, USA), Roy Flynn (Flood Protection Manager in Metropolitan Sewer District, Louisville, KY, USA) Abstract No. 737

Track: Computers and Information Systems Session: Advanced Predictive Analytics for Healthcare and Wellness Assurance Chair(s): Satish Bukkapatnam (Oklahoma State University), Trung Le (Oklahoma State University) Time & Place: T800 Room: Flamingo A

Prediction of Cardiorespiratory Signals: Toward a Preventive Treatment for Obstructive Sleep Apnea Patients Trung Le (Oklahoma State University), Changqing Cheng (Oklahoma State University), Akkarapol Sa-ngasoongsong (Oklahoma State University), Satish Bukkapatnam (Oklahoma State University), Woranat Wongdhamma (Oklahoma State University) Abstract No. 174 *

A Systematic Review of the Healthcare Information Seeking and Dissemination Process on YouTube Kapil Chalil Madathil (Clemson University) Abstract No. 360

| Welcome to the IIE Annual Conference & Expo 201382

ISERC Sessions

Track: Tutorials Session: Human Error, Safety, and Usability in Workplace Chair(s): Gino Lim (University of Houston) Time & Place: T800 Room: Flamingo B

Human Error, Safety, and Usability in Workplace: Theory and Application Dongjoon Kong (The Boeing Company), Paul Marshall (The Boeing Company) Abstract No. 748

Track: Manufacturing and Design Session: Lean Manufacturing Systems - I Chair(s): Lei Zhou (University of Missouri) Time & Place: T800 Room: Flamingo C

Lean Manufacturing Processes With GraFem Michael Hausicke (University of Siegen), Volker Grienitz (University of Siegen), André-Marcel Schmidt (University of Siegen) Abstract No. 561

Integrated Analysis of Productivity and Quality in Serial Production Lines with Repairs Feng Ju (University of Wisconsin-Madison), Jingshan Li (University of Wisconsin - Madison), Guoxian Xiao (General Motors Corporation, Research and Development Center) Abstract No. 873

Evaluating Recyclability of New Products during the Design Stage Tasha Sirikaya (University of Missouri), Lei Zhou (University of Missouri), Luis Occeña (University of Missouri) Abstract No. 1031

Managing Complexity in a Production System Nihal Orfi (Iowa State University), Janis Terpenny (Iowa State University), Asli Sahin (Virginia Tech) Abstract No. 1082

Track: Quality and Reliability Engineering Session: Lean and Six Sigma Methodology Chair(s): Thomas Zugelder (The Ohio State University) Time & Place: T800 Room: Guayacan

Reducing Engineering/Design Time for EPC Oil and Gas Projects Jesus Villanueva (University of Houston), Jamison Kovach (University of Houston) Abstract No. 95

The Lean Six Sigma Literature Revisited: Review and Agenda For Research Theodore Allen (The Ohio State University), Thomas Zugelder (The Ohio State University) Abstract No. 731

Online Inventory Control Using a Multiobjective Six Sigma Approach Emad Abualsauod (UCF), Christopher Geiger (University of Central Florida) Abstract No. 1342

Track: Quality and Reliability Engineering Session: Quality Management and Six Sigma Chair(s): Amr Alamri (Wayne State University) Time & Place: T800 Room: Maguey

Six Sigma Global Diffusion: Locational Analysis Amr Alamri (Wayne State University - Saudi Ministry of Higher Education) Abstract No. 955

www.iienet.org/annual | 83 83

ISERC Sessions

Control charting of evidence-based bundle composite compliance measures Binchao Chen (Texas Tech Unversity), Timothy Matis (Texas Tech University) Abstract No. 1195

A Starbucks Beverage in Less Than 5 Minutes? Brandon Theiss (Rutgers University), Mathew Brown (Rutgers University) Abstract No. 302

Track: Energy Session: Clean Energy & Renewables-II Chair(s): K. Jo Min (Iowa State University) Time & Place: T800 Room: Salon del Mar A

Development of Hydrogen Fueling Infrastructures in the Northeastern United States Hossein Abdollahnejad Barough (Northern Illinois University), Kevin Martin (Northern Illinois University) Abstract No. 1123

Repowering/Decommissioning Decisions for Renewable Power Producers and Policy Implications K. Jo Min (Iowa State University), Chenlu Lou (Iowa State University) Abstract No. 1225

Track: Construction Research Session: Construction Productivity Chair(s): Isabelina Nahmens (Louisiana State University) Time & Place: T800 Room: Salon del Mar B

Automating Construction Activity Generation & Visualization Yibrah Weldu (Louisiana State University), Gerald M. Knapp (Lousiania State University) Abstract No. 870

Effect of Fly Ash and Nano-Silica on Concrete Compressive Strength Nitza García (University of Puerto Rico at Mayagüez), Luis Zapata (University of Puerto Rico at Mayagüez), Giovanni Torres (University of Puerto Rico Mayaguez Campus), Marcelo Suárez (University of Puerto Rico at Mayagüez), Mauricio Cabrera-Ríos (University of Puerto Rico, Mayaguez Campus) Abstract No. 1134

Track: Engineering Education Session: Undergraduate Course Improvement Chair(s): Thomas Sharkey (Rensselaer Polytechnic Institute) Time & Place: T800 Room: Tropical A

Product Development Undergraduate Course Improvement: a Business Process Management Perspective Eduardo Zancul (University of Sao Paulo), Paulo A. Cauchick Miguel (Federal University of Santa Catarina) Abstract No. 356

Overcoming Challenges Facing Baby Boomer Faculty in Teaching Millennial Students Kailash Bafna (Western Michigan University) Abstract No. 254

Video Tutorials: Student Use and Perception in an OR Course Sarah Nurre (Rensselaer Polytechnic Institute), Thomas Sharkey (Rensselaer Polytechnic Institute) Abstract No. 590

| Welcome to the IIE Annual Conference & Expo 201384

ISERC Sessions

Track: Engineering Management Session: Healthcare Systems Management Chair(s): Wiljeana Glover (Massachusetts Institute of Technology) Time & Place: T800 Room: Tropical B

Continuous Improvement Projects in Hospitals: A Systematic Literature Review Fernando Gonzalez Aleu (Virginia Tech), Eileen Van Aken (Virginia Tech) Abstract No. 313 *

Improving Departmental Quality Performance With Interdepartmental Integration Qing Li (Georgia Institute of Technology), Wiljeana Glover (Massachusetts Institute of Technology), Eitan Naveh (Technion - Israel Institute of Technology), Michael Gross (Bnai Zion Medical Center) Abstract No. 315 *

Continuous Improvement in Healthcare Elizabeth Cudney (Missouri S&T), Brian Smith (Missouri University of Science & Technology), Christopher Masek (Veterans Administration) Abstract No. 180 *

Track: Facility Logistics Session: Facility Logistics I - Layout Chair(s): Sadan Kulturel-Konak (Penn State Berks) Time & Place: T800 Room: Tropical C

Models to Evaluate Layout and Staffing Policies at Relief Centers Merve Ozen (University of Wisconsin Madison), Ananth Krishnamurthy (University of Wisconsin-Madison) Abstract No. 463 *

Linear Penalty relation in Genetic-based algorithms in Block Relocation Problem-Weights Mazen Hussein (University of Wisconsin-Oshkosh), Matthew Petering (University of Wisconsin--Milwaukee) Abstract No. 384

Location/Shape Representation for the Unequal Area Facility Layout Problem Sadan Kulturel-Konak (Penn State Berks), Abdullah Konak (Penn State Berks) Abstract No. 718 *

Track: Lean Systems Session: Lean Methods Chair(s): Lawrence Whitman (Wichita State University) Time & Place: T1100 Room: Ceiba

A Lean Manufacturing Model for Reducing Idle Time on a Production Line Mario Aguilar Fernandez (Instituto Politécnico Nacional, UPIICSA), Eduardo Gutiérrez González (Instituto Politecnico Nacional, UPIICSA), Isidro M. Cristobal-Vazquez (Instituto Politecnico Nacional, UPIICSA) Abstract No. 1311

Fundamental Properties of Government Performance Improvement Approaches Bernardo Buenviaje (George Washington University), Shahram Sarkani (George Washington University), Thomas A. Mazzuchi (George Washington University) Abstract No. 1420

Developing Six Sigma Methods for New Production Processes Joseph Anderson (University of Southern Mississippi), Mohammad Rahman (The University of Southern Mississippi), Faisal Mallum (University of Southern Mississippi) Abstract No. 1396

www.iienet.org/annual | 85 85

ISERC Sessions

Track: Operations Research Session: Stochastic Applications of Operations Research Chair(s): Sanket Bhat (University of Wisconsin - Madison) Time & Place: T1100 Room: Conf Center A

Some Perspectives on the Application of Little’s Law Fazel Hayati (Edgewood College) Abstract No. 265

Flexible Policies for Multi-Class Systems with Seasonal Demands Sanket Bhat (University of Wisconsin - Madison), Ananth Krishnamurthy (University of Wisconsin-Madison) Abstract No. 487

Track: Healthcare Systems Session: Policy Chair(s): Tom Rust (Veterans Health Administration) Time & Place: T1100 Room: Conf Center C

Improving the US Healthcare System: Lessons from Italy Olivia Fahnestock (Purdue University), Sara McComb (Purdue University), Lorenzo Fedele ( Sapienza Università di Roma), Abhijit Deshmukh (Industrial Engineering, Purdue University) Abstract No. 374

Performance Assessment of U.S Healthcare Sector: A System Dynamics Approach Can Celikbilek (Ohio University), Mehmet Tevfik Kitapci (M.D) Abstract No. 376

Adult Medicaid Dental Benefits and Tooth Loss among Low-Income Adults Marta Ventura (Pennsylvania State University), Paul Griffin (Penn State University) Abstract No. 1126

Track: Healthcare Systems Session: Technology Chair(s): Mustafa Ozkaynak (Worcester Polytechnic Institute), Mustafa Ozkaynak (Worcester Polytechnic Institute) Time & Place: T1100 Room: Conf Center D

Web-based Healthcare KPI Dashboard System Thomas Chen (University of Houston) Abstract No. 75

Alert Fatigue Secondary to Computerized Physician Order Entry Order Checks Nicholas Coblio (James A Haley VAH), Alexia Makris (USF College of Public Health), Kim Mowrey (James A Haley VAH) Abstract No. 974

Identifying Potential Task-related Factors Affecting User Acceptance of CHIT Applications Reshmi Koikkara (Clemson University), Kapil Chalil Madathil (Clemson University), Melissa Dorlette Paul (Clemson University), Anand Gramopadhye (Clemson University) Abstract No. 1210

| Welcome to the IIE Annual Conference & Expo 201386

ISERC Sessions

Track: Supply Chain and Logistics Session: Production and Distribution Planning Chair(s): Can Celikbilek (Ohio University) Time & Place: T1100 Room: Flamboyan

Production and Subcontracting Policies in Assemble-to-Order Systems Ashesh Kumar Sinha (University of Wisconsin - Madison), Ananth Krishnamurthy (University of Wisconsin-Madison) Abstract No. 352

A Multiple Product Multiple Server Facility Location Problem with Resources Subject to the Congestion Hossein Abdollahnejad Barough (Northern Illinois University), Sukgon Kim (Northern Illinois University) Abstract No. 1026

Determining production quantities and alternative transportation modes in manufacturing systems Can Celikbilek (Ohio University), Gürsel Süer (Ohio University) Abstract No. 757

Track: Quality and Reliability Engineering Session: Control Charts and Process Monitoring Chair(s): Anna Schuh (Virginia Polytechnic Institute and State University) Time & Place: T1100 Room: Guayacan

Cost sensitive supervised learning approaches for control chart pattern recognition Petros Xanthopoulos (University of Central Florida), Talayeh Razzaghi (University of Central Florida) Abstract No. 1223

Optimal Configuration of Modified Tukey´s Control Chart Víctor Tercero-Gómez (Universidad Autónoma de Nuevo León), Elena Villanueva-Guerra (Universidad Autónoma de Nuevo León), Alvaro Cordero-Franco (Universidad Autónoma de Nuevo León) Abstract No. 1335

Including accident severity in statistical monitoring systems for occupational safety Anna Schuh (Virginia Polytechnic Institute and State University), Jaime Camelio (Virginia Tech) Abstract No. 634

Track: Supply Chain and Logistics Session: CELDi - Logistics and Distribution - II Chair(s): James Noble (University of Missouri) Time & Place: T1100 Room: Maguey

Productivity Improvement Studies at Glen Raven Custom Fabrics Wei Zhao (Clemson University), Kevin Taaffe (Clemson University), Robert Allen (Clemson University), Scott Mason (Clemson University) Abstract No. 76 *

A Comparison of (r, Q) Inventory Optimization Algorithms Juliana Bright (University of Arkansas), Manuel Rossetti (University of Arkansas) Abstract No. 78 *

Retrospective Optimization and Stochastic Approximation for Supply Chain Policy Optimization Phil Kaminsky (University of California, Berkeley), Stewart Liu (University of California, Berkeley), Lee Schruben (UC Berkeley IEOR), Ming Yuen (University of California, Berkeley), Giulia Pedrielli (Politecnico di Milano) Abstract No. 79 *

www.iienet.org/annual | 87 87

ISERC Sessions

Track: Poster Track Session: Poster Session T1 Chair(s): Time & Place: T1100 Room: Poster Hall

Effect of Smart Parking Technology on Campus Parking System Efficiency using Discrete Event Simulation Glenn Surpris (Embry-Riddle Aeronautical University), Dahai Liu (Embry-Riddle Aeronautical University), Massoud Bazargan (Embry-Riddle Aeronautical University), Dennis Vincenzi (Embry-Riddle Aeronautical University) Abstract No. 204

What is the best pedestrian preemption warning? Denise Bauer (University of Idaho), Richard Wall (University of Idaho) Abstract No. 1150

Design of a Logistic Model for the Supply Chain LEONARD EDUARDO BARRERA PARRA (Universidad Libre), Jeyson Andres Martinez Gamboa (Universidad Libre), Ever Angel Fuentes Rojas (Universidad Libre) Abstract No. 1085

Cost Benefits Comparison of Port Trans-loading with Direct Shipping Matthew Norton (knight Transportation), Xinxin Cui (University of Southern Mississippi), Mohammad Rahman (The University of Southern Mississippi) Abstract No. 1350

Challenges and Opportunities in the IEM Undergraduate Degree Curricular Redesign Argelia Vargas-Moreno (Universidad Autónoma de Nuevo León), Azucena Minerva García-León (Universidad Autónoma de Nuevo León) Abstract No. 776

Emergency Rooms Design Using Simulation Francisco Ramis (Universidad del Bio-Bio), LILIANA NERIZ (UNIVERSIDAD DE CHILE), Jose Sepulveda (University of Central Florida) Abstract No. 1407

What are the best sources of energy for Puerto Rico? Karla Iglesias (Univiersity of Puerto Rico Mayaguez Campus), Mayra Méndez-Piñero (Univeristy of Puerto Rico) Abstract No. 858

Redesigning the Process Flow to Effectively Manage Student Records Tamika Gordon (Binghamton University) Abstract No. 1351

Track: Energy Session: Smart Grid Modeling-II Chair(s): Jay Rosenberger (The University of Texas Arlington) Time & Place: T1100 Room: Salon del Mar A

A Simulation Model with Multi-Attribute Utility Functions for Energy Consumption Scheduling in a Smart Grid Prajwal Khadgi (University Of Louisville), Lihui Bai (University of Louisville), Gerald Evans (University of Louisville), Qipeng Zheng (West Virginia University) Abstract No. 607

Incentive Compatible Contracting of Thermostats Control for Renewable Energy Integration Li Xu (Georgia Institute of Technology), Shijie Deng (Georgia Institute of Technology) Abstract No. 638

| Welcome to the IIE Annual Conference & Expo 201388

ISERC Sessions

Control for a System of PHEV Charging Stations Asama Kulvanitchaiyanunt (University of Texas at Arlington), Victoria Chen (University of Texas at Arlington), Jay Rosenberger (The University of Texas Arlington), Wei-jen Lee, Piampoom Sarikprueck (Co-Author) Abstract No. 693

Customer-Based Building Energy Management Using Model Predictive Control Mesut Avci (University of Miami), Murat Erkoc (University of Miami), Shihab Asfour (University of Miami) Abstract No. 1277

Track: Construction Research Session: Energy and the Environment in Construction Chair(s): Al Attah Time & Place: T1100 Room: Salon del Mar B

Lessons Learned from Establishing a Center for Students with Disabilities at a Large Public University Wajdi Wazzan (King Abdulaziz University) Abstract No. 850

Life Cycle-based Holistic Approach to Prioritize the LEED Credit Strategies Toward Net-Zero Carbon Buildings Murat Kucukvar (University of Central Florida), Nuri C. Onat (University of Central Florida), Omer Tatari (Univesity of Central Florida) Abstract No. 1363

The Optimal Design of Water Supply Systems for Energy Efficiency Weiwei Mo (University of South Florida), Qingwei Li (Eastman Chemical Company), Qiong Zhang (University of South Florida), Gang Liu (University of South Florida) Abstract No. 1422

Kinect Applications in Construction: From Tracking to Reconstruction Mehdi Khazaeli (Louisiana State University), Leili Javadpour (Lousiania State University), Gerald M. Knapp (Lousiania State University) Abstract No. 766

Track: Engineering Management Session: Product Development and Portfolio Selection Chair(s): Paul Componation (Iowa State University) Time & Place: T1100 Room: Tropical A

Alternative Methodology for TRIZ Implementation Gretchen Macht (Pennsylvania State University), Gul E. Okudan Kremer (The Pennsylvania State University), David Nembhard (Pennsylvania State University) Abstract No. 860

Historical Data-Driven Product Improvement: The Case of Medical Device Inki Kim (The Pennsylvania State University), Gul Okudan (The Pennsylvania State University) Abstract No. 740

Portfolio Selection for Defense Robotics Robert Wade (US Army Aviation and Missile Research Development and Engineering Center), Paul Componation (Iowa State University) Abstract No. 897

www.iienet.org/annual | 89 89

ISERC Sessions

Track: Engineering Management Session: Engineering Management in Healthcare - 3 Chair(s): Shengyong Wang (The University of Akron) Time & Place: T1100 Room: Tropical B

A Classification Model for Hospital Readmission Using Combined Neural Networks Jinghe Zhang (State University of New York at Binghamton), Sarah Lam (State University of New York at Binghamton), Srikanth Poranki (UHS Hospitals) Abstract No. 171 *

A “Lean” Approach to Improving SCIP Compliance Ravi Uppal (University of Akron), Shengyong Wang (The University of Akron), Nathan Maggelet (University Of Akron), Mary Gallik (Lake Health), Joyce Taylor (Lake Health), Mary Ogrinc (Lake Health), Whitney Lloyd (Lake Health) Abstract No. 482 *

Perioperative Staff Planning Based on a 6-Week Volume Snapshot Di Li (University of Akron), Shengyong Wang (The University of Akron), Chris Powers (Summa Health System) Abstract No. 483

Track: Engineering Management Session: Risk Management Chair(s): Hans Thamhain (Bentley University) Time & Place: T1100 Room: Tropical C

Managing Risk in Engineering Projects: The Impact of Team Leadership Hans Thamhain (Bentley University) Abstract No. 604

Forecast for Market Demand Surge during Catastrophic weather Mohammad Rahman (The University of Southern Mississippi), Asheka Rahman (University of Southern Mississippi), Matthew Norton (knight Transportation) Abstract No. 1375

Track: Homeland Security Session: Network Interdiction 2 Chair(s): Hugh Medal (Mississippi State University) Time & Place: T1230 Room: Conference 3

Network-based Physical Protection Modeling on Nuclear Facilities Justin Yates (Texas A&M University) Abstract No. 414 *

Defending and Interdicting Probabilistic Species Migration Jorge Sefair (University of Florida), Cole Smith (University of Florida), Miguel Acevedo (University of Florida), Robert Fletcher (University of Florida) Abstract No. 415 *

Dynamic Link Suspension of an Infectious Disease Network Apurba Nandi (Mississippi State University), Hugh Medal (Mississippi State University) Abstract No. 570 *

| Welcome to the IIE Annual Conference & Expo 201390

ISERC Sessions

Track: Social, Environmental and Sustainability Session: Closed Loop Supply Chain I Chair(s): Mehdi Noori (University of Central Florida) Time & Place: T1230 Room: Conference 4/5

Design of Closed Loop Supply Chain Networks Subramanian Pazhani (The Pennsylvania State University), Ravi Ravindran A (Harold and Inge Marcus Department of Industrial & Manufacturing Engineering, The Pennsylvania State University, University Park) Abstract No. 430

A Comparison of Modularity Methods for Their Implications on Sustainability Nirup Philip (The Pennsylvania State University ), Gul Okudan (The Pennsylvania State University), Karl R. Haapala (Oregon State University), Kyoung-Yun Kim (Wayne State University) Abstract No. 1007

Benchmarking the Sustainability Performance of U.S. Manufacturing Sectors from an Eco-efficiency Perspective Gokhan Egilmez (Ohio University), Murat Kucukvar (University of Central Florida), Omer Tatari (Univesity of Central Florida) Abstract No. 247

Track: IE in Latin America Session: Engineering Management and Strategy Chair(s): Homero H. Contreras (UPAEP) Time & Place: T1230 Room: Conference 6

Proposed Design for Active Rehabilitation System in March for paraplegic patients Juan Carlos De la Rosa (Universidad Popular Autonoma del Estado de Puebla (UPAEP)), Fernando Salazar (Pontificia Universidad Javeriana), Pablo Nuño (UPAEP) Abstract No. 1118

Enterprise Innovation Stimulation through Strategic Sourcing Isidro M. Cristobal-Vazquez (Instituto Politecnico Nacional, UPIICSA), Mario Aguilar Fernandez (Instituto Politécnico Nacional, UPIICSA), Ma. del Rosario Perez-Salazar (Instituto Tecnológico Superior de Tantoyuca, Mexico), Brenda Roa Avila (Instituto Politecnico Nacional, UPIICSA) Abstract No. 1376

A Mexican Flower Cluster: Strategy and Industrial Engineering Homero Héctor Contreras Pulido (Universidad Popular Autónoma del Estado de Puebla), Martha Alejandra Cabanas Villa (Universidad Popular Autónoma del Estado de Puebla), Pablo Nuno (UPAEP University) Abstract No. 752

Track: IE in Latin America Session: Operations Research: Decisions Making and Simulation Chair(s): Marco Serrato (Tecnologico de Monterrey) Time & Place: T1230 Room: Conference 7

A Supplying Method to Establish the Bill of Materials in an Automotive Company Eduardo Gutiérrez González (Instituto Politecnico Nacional, UPIICSA), Mario Aguilar Fernandez (Instituto Politécnico Nacional, UPIICSA), Isidro M. Cristobal-Vazquez (Instituto Politecnico Nacional, UPIICSA) Abstract No. 542

Simulator for Lean Manufacturing Applications: Quick Change Case Maria Guadalupe López-Molina (Universidad Iberoamericana Puebla), Gabriel Atristain Suarez (Universidad Iberoamericana Puebla), Gabriel Vargas Salcedo (Universidad Iberoamericana (Puebla)), José Alfredo López de Cosío (Universidad Popular Autónoma del Estado de Puebla) Abstract No. 1141

www.iienet.org/annual | 91 91

ISERC Sessions

Wireless Sensor Networks for the Improvement of Colombia's Container Management MARIA CLAUDIA ANGEL (INSTITUT D'ADMINISTRATION DES ENTREPRISES MONTPELLIER), Fernando Salazar (Pontificia Universidad Javeriana) Abstract No. 1405

A Markov Decision Model for replacement analysis in swine farms Marco Serrato (Tecnologico de Monterrey), Marco Montufar (Universidad Autonoma del Estado de Hidalgo) Abstract No. 1083

Track: Service Systems Session: Analytical Models and Metrics of Service Systems Chair(s): José Santiváñez (Universidad del Turabo) Time & Place: T1230 Room: Conference 8+9

Optimal Pricing of Phase-out Items in Retail Stores Emanuel Melachrinoudis (Northeastern University), Nizar Zaarour (Northeastern University), Marius Solomon (Northeastern University) Abstract No. 121 *

Comparison of Service Reliability Metrics on Vulnerable Stochastic Networks Jean Carlos Rivera (Universidad del Turabo), José Santiváñez (Universidad del Turabo), Emanuel Melachrinoudis (Northeastern University) Abstract No. 122 *

Location of Reliable Medians on Vulnerable Networks with Stochastic Demands Wesley Marrero (Universidad del Turabo), José Santiváñez (Universidad del Turabo), Emanuel Melachrinoudis (Northeastern University) Abstract No. 123 *

Service Survivability Models and Metrics on Vulnerable Stochastic Networks José Santiváñez (Universidad del Turabo), Emanuel Melachrinoudis (Northeastern University) Abstract No. 124 *

Track: Computers and Information Systems Session: Modeling Technology to Improve Operations in the Supply Chain Chair(s): David Porter (Oregon State University) Time & Place: T1230 Room: Flamingo A

An RFID Network Design Methodology for Inventory Management ATIPONG SURIYA (Oregon State University), David Porter (Oregon State University) Abstract No. 1154 *

Impact of RFID Technology on Dynamic Supply Chain Designs Myrna Leticia Cavazos (Oregon State University), David Porter (Oregon State University) Abstract No. 1016 *

A GIS-Based Framework for the Location of Facilities Saeed Ghanbartehrani (Oregon State University), David Porter (Oregon State University) Abstract No. 1129 *

GIS-Based Hierarchical Multi-Objective Supply Chain Network Design: A Proposed Tool & Case Study Ting Lei (The Pennsylvania State University), Gul E. Okudan Kremer (The Pennsylvania State University) Abstract No. 523

| Welcome to the IIE Annual Conference & Expo 201392

ISERC Sessions

Track: Tutorials Session: Titans of Simulation Chair(s): Jeffrey Herrmann (University of Maryland) Time & Place: T1230 Room: Flamingo B

Advances in ISE/Simulation: Interplay of Inspiration, Intuition, Abstraction, and Experimentation James Wilson (NC State University) Abstract No. 1483 *

Track: Manufacturing and Design Session: Manufacturing and Design Town Hall Meeting Chair(s): Time & Place: T1230 Room: Flamingo C

Track: Modeling and Simulation Session: Simulation Modeling for Risk Management & Pricing Chair(s): Rosaurelis Marín (University of Puerto Rico, Mayaguez Campus) Time & Place: T1230 Room: Flamingo D

Maritime Risk Assessment Model: A Simulation Study Selim Bora (Rutgers University), Hamid Parsaei (Texas A&M University at Qatar), Gino Lim (University of Houston), Birnur Ozbas (Rutgers, The State University of New Jersey) Abstract No. 710

Modeling the Risk of Endometriosis in Puerto Rican Females Saylisse Davila (University of Puerto Rico-Mayaguez), Rosaurelis Marín (University of Puerto Rico, Mayaguez Campus), Jessica Fourquet (Ponce School of Medicine and Health Sciences), Idhaliz Flores (Ponce School of Medicine and Health Sciences) Abstract No. 1321

Track: Poster Track Session: Poster Session T2 Chair(s): Time & Place: T1230 Room: Poster Hall

Process Modeling in the Housing Allowance Using Discrete Simulation Diana Carolina Martínez Hernández (Universidad Libre), Edith Yarlet Méndez Rivas (Universidad Libre - Colombia), Oscar Mayorga Torres (Universidad Libre) Abstract No. 1417

Ethnic Disparities in Construction Safety and Health Alexander Baylis (Virginia Tech), Maria Alejandra Begazo (Virginia Tech), Luis Aguilar (Virginia Tech) Abstract No. 601

Effects of Resource Capacity Constraints on the Performance of a multi-level/multi-product Supply Chain Tarek Al-Hawari (Jordan University of Science and Technology), Abdulaziz Ahmed (State University of New Nork at Binghamton), Samir Khrais (Jordan University of Science and Technology), Ahmad Mumani (Jordan University of Science and Technology) Abstract No. 574

Distribution Network Study for Puerto Rico’s Commercial Cooperatives Gualberto Molina-Rivera (University of Puerto Rico, Mayaguez Campus), Roberto Seijo-Vidal (University of Puerto Rico, Mayagüez Campus) Abstract No. 1348

Development of Parabolic Trough Collectors for Agribusiness Applications Dehydrated Garcia Yazmani (CIATEC, A.C.), Sergio Alonso (CIATEC), Set Vejar (UNIVERSIDAD POLITECNICA DE ZACATECAS), JAVIER YAÑEZ-MENDIOLA (CIATEC), Javier Cruz (CIATEC, A.C), Oscar Cruz (CIATEC, A.C) Abstract No. 1272

www.iienet.org/annual | 93 93

ISERC Sessions

System Dynamic Model of Defects Generation in Software Engineering Elena Villanueva-Guerra (Universidad Autónoma de Nuevo León), Víctor Tercero-Gómez (Universidad Autónoma de Nuevo León), María Alcorta García (UANL) Abstract No. 1216

Design of a development model to improve the food bank processes Graciela Caffarel (Tecnologico de Monterrey), Imelda de Jesus Loera-Hernandez (ITESM), Juan Hinojosa (Tecnologico de Monterrey), Carlos Chee (Tecnologico de Monterrey) Abstract No. 682

Decision-Making Framework for Capacity Calculation of Manufacturing Lines Cristina Pomales-García (University of Puerto Rico Mayaguez), Catherine Rosario (University of Puerto Rico-Mayagüez) Abstract No. 650

Track: Engineering Education Session: Social Issues in Engineering Education Chair(s): Barrett Caldwell (Purdue University) Time & Place: T1230 Room: Tropical A

STEM Participation, Involvement and Diversity in Human Factors & Ergonomics Barrett Caldwell (Purdue University) Abstract No. 663

The Socio-Economic Background Effect on UPRM Engineering Students’ Academic Performance Verónica Miguel (University of Puerto Rico at Mayaguez), Sonia Bartolomei-Suárez (Industrial Engineering Department University of Puerto Rico Mayagüez, Puerto Rico 00681 ), William Grey (Industrial Engineering Department Mercer University 1400 Coleman Avenue, Macon, Georgia 31207 ) Abstract No. 1023

Predictors of Innovation in Engineering Student Teams: A Critical Review Sarah Asio (Texas Tech University), Jennifer Farris (Texas Tech University) Abstract No. 533

Track: Engineering Management Session: Engineering Management Journal Editorial Board Meeting Chair(s): Toni Doolen (Oregon State University) Time & Place: T1230 Room: Tropical B

Track: Operations Research Session: Metaheuristics Chair(s): Mengqi Hu (Mississippi State University) Time & Place: T200 Room: Conf Center A

A Particle Swarm Optimization with Bi-Local Searches and Mutation Mengqi Hu (Mississippi State University) Abstract No. 820

An Effective Genetic Algorithm for 1-D Cutting Stock Problem Eghbal Rashidi (Mississippi State University), Mostafa Zandieh (Shahid Beheshti University) Abstract No. 1186

Assignation of Storage Allocations Based on Simulation - Artificial Neural Networks Oscar Cruz (Centro de Innovación Aplicada en Tecnologías Competitivas A.C.), Ramiro Santos (Universidad Politécnica de Zacatecas) Abstract No. 1260

| Welcome to the IIE Annual Conference & Expo 201394

ISERC Sessions

Assessing the Applicability of Schooling Genetic Algorithms to Product Design Patrick Wanko (North Carolina Agricultural & Technical State University), Paul Stanfield (North Carolina A&T State University) Abstract No. 1287

Track: Healthcare Systems Session: Patient Safety Chair(s): Brittany Melton (Purdue University) Time & Place: T200 Room: Conf Center B

From Practicality to Practitioner: a Perspective on Patient Safety Brittany Melton (Purdue University), Tom Seto (Purdue University), Shree Frazier (Purdue University), Dede Frederick (Purdue University) Abstract No. 1075

Dissipation of a Patient Safety Initiative: a Soft OR approach David Puga-Bolio (Universidad Anahuac Mayab), Michael Pidd (Lancaster University Management School), Jeremy Busby (Lancaster University Management School), Andrew Smith (University Hospitals of Morecambe Bay NHS Ttrust) Abstract No. 1138

Patient Risk Improvement Through the Use of Data Standards. Paiman Farrokhvar (University of Arkansas), Nebil Buyurgan (University of Arkansas) Abstract No. 1155

Track: Healthcare Systems Session: Inventory Control Chair(s): Bryan Norman (University of Pittsburgh) Time & Place: T200 Room: Conf Center C

EOQ-based Inventory Control Policies for Perishable Items: The Case of Blood Plasma Inventory Management Junfeng Ma (The Pennsylvania State University), Ting Lei (The Pennsylvania State University), Gul Okudan (The Pennsylvania State University) Abstract No. 1014

Stochastic Multiechelon Inventory Modeling for Bundled Products: Combination Vaccines' Case Karl Corporan (Rochester Institute of Technology), Ruben Proano (Rochester Institute of Technology) Abstract No. 1073

Pharmaceutical Inventory Control under Uncertainty Erhun Kundakcioglu (University of Houston), Samira Saedi (Department of Industrial Engineering, University of Houston), Andrea C. Henry (Department of Pharmacy, Pharmacoeconomic, Harris County Hospital District) Abstract No. 1131

Analysis of Cold Storage Device Options for Vaccine Supply Chains Sevnaz Nourollahi (University of Pittsburgh), Sheng-I Chen (University of Pittsburgh), Erin Claypool (University of Pittsburgh), Shawn Brown (University of Pittsburgh), Bruce Lee (University of Pittsburgh), Bryan Norman (University of Pittsburgh), Jayant Rajgopal (University of Pittsburgh) Abstract No. 1197

Track: Healthcare Systems Session: Screening and Early Prevention I Chair(s): Can Celikbilek (Ohio University) Time & Place: T200 Room: Conf Center D

Benchmarking Chronic Diseases and Prevention of U.S. States: DEA Approach Can Celikbilek (Ohio University), Diana Schwerha (Ohio University) Abstract No. 229

www.iienet.org/annual | 95 95

ISERC Sessions

Better and Safer Depression Care Through Systems Engineering and Technology Shinyi Wu (University of Southern California), Kathleen Ell (University of Southern California), Irene Vidyanti (University of Southern California), Pai Liu (University of Southern California), Caitlin Hawkins (University of Southern California - Viterbi School of Engineering), Magaly Ramirez (University of Southern California ) Abstract No. 898

Incorporating Human Behavior in Simulation Models for Screening Strategies Evaluation Irene Vidyanti (University of Southern California), Shinyi Wu (University of Southern California) Abstract No. 1036

Simulation Model with Nested Design to Evaluate Multi-level Screening Strategies Irene Vidyanti (University of Southern California), Shinyi Wu (University of Southern California) Abstract No. 1039

Track: Homeland Security Session: Screening Models in Homeland Security Chair(s): Gino Lim (University of Houston) Time & Place: T200 Room: Conference 3

Increasing Domestic Food Security through Traceability Technology Samuel Littlejohn (South Carolina State University), Jasmine Moorman (South Carolina State University) Abstract No. 323

Evacuation planning in situation of distributional uncertainty of demand Mukesh Rungta (University of Houston), Gino Lim (University of Houston), Hamid Parsaei (Texas A&M University at Qatar) Abstract No. 653

Screening simulation for balancing congestion and security Marie Catalano (University at Buffalo), Elizabeth Newell (University at Buffalo), John Coles (University at Buffalo), Jun Zhuang (University at Buffalo, SUNY) Abstract No. 854

Track: Social, Environmental and Sustainability Session: Closed Loop Supply Chain II Chair(s): Subramanian Pazhani (The Pennsylvania State University) Time & Place: T200 Room: Conference 4/5

Estimation of the cradle-to-grave CO2 footprint of wood pallets logistics operations Henry Woltag (Rochester Institute of Technology), Andres Carrano (Rochester Institute of Technology), Brian Thorn (Rochester Institute of Technology), Michael Hewitt (Rochester Institute of Technology) Abstract No. 15

Eco-Efficiency Analysis of Product Return Strategies Mehdi Noori (University of Central Florida), Omer Tatari (Univesity of Central Florida), Jennifer Pazour (Univesity of Central Florida) Abstract No. 1159

Track: Production Planning and Scheduling Session: Production Planning and Scheduling 12 Chair(s): José Ventura (The Pennsylvania State University) Time & Place: T200 Room: Conference 6

Health Indices Development by Data-level Fusion with Multiple Failure Modes Kaibo Liu (Georgia Institue of Technology), Jianjun Shi (Georgia Institute of Technology) Abstract No. 197

| Welcome to the IIE Annual Conference & Expo 201396

ISERC Sessions

Quantity Discounts Decisions Considering Multiple Suppliers, with Capacity and Quality Restrictions Hamza Adeinat (The Pennsylvania State University), José Ventura (The Pennsylvania State University) Abstract No. 239

An EOQ Binary Model with All Units Discounts for Multiproducts Valdecy Pereira (Universidade Federal Fluminense (UFF)), Helder Costa (Universidade Federal Fluminense) Abstract No. 448

Track: Process Industries Session: Lean in Process Industries Chair(s): Manoj Dora (Ghent University) Time & Place: T200 Room: Conference 7

Developing a volume/mix capability model based on lean principles for a beverage company Dirk Van Goubergen (Van Goubergen P&M gcv), Maaike Pattyn (Unilin ) Abstract No. 173

Magnitude of “food loss” in Belgian food processing industry Manoj Dora (Ghent University), Dirk Van Goubergen (Van Goubergen P&M gcv), Hans De Steur (Ghent University), Xavier Gellynck (Ghent University) Abstract No. 257

Track: Service Systems Session: Data Mining and Imbalanced Data Chair(s): Maher Maalouf (Khalifa University of Science, Technology and Research) Time & Place: T200 Room: Conference 8+9

Convective-Stratiform Classification Characterized by 2D-Video Disdrometer – The Fuzzy Logic Approach Petar Bukovcic (University of Oklahoma), Dusan Zrnic (National Sever Storms Laboratory), Guifu Zhang (University of Oklahoma) Abstract No. 937 *

Designing a low cost phonocardiography machine for cardiorespiratory monitoring Ahsan Khandoker (Khalifa University), Maher Maalouf (Khalifa University of Science, Technology and Research) Abstract No. 938 *

Weighted Logistic Regression for Large-Scale Imbalanced and Rare Events Data Maher Maalouf (Khalifa University of Science, Technology and Research), Hani Saleh (Khalifa University ) Abstract No. 939 *

Track: Supply Chain and Logistics Session: Distribution Systems Planning Chair(s): Marie-Eve Rancourt (University of Quebec in Montreal) Time & Place: T200 Room: Flamboyan

Modeling a Distribution Network of aAgricultural Products in Panama Humberto Alvarez (Technological University of Panama), Andres Orozco (International Maritime University of Panama) Abstract No. 695

Optimization in the Process of Distribution in the Laboratories Serfelsa S.A. Juliana Marcela Castellanos Galan (Universidad Libre Colombia), Ever Angel Fuentes Rojas (Universidad Libre) Abstract No. 1005

Analyzing Near Port Warehousing Growth Patterns due to the Panama Canal Expansion MD Sarder (University of Southern Mississippi), Chad Miller (University of Southern Mississippi), Tulio Sulbaran (University of Southern Mississippi) Abstract No. 1318

www.iienet.org/annual | 97 97

ISERC Sessions

Tactical network planning for food aid distribution in Kenya Marie-Eve Rancourt (University of Quebec in Montreal), Jean-François Cordeau (HEC Montreal), Gilbert Laporte (HEC Montreal), Ben Watkins (Kimetrica) Abstract No. 962

Track: Computers and Information Systems Session: Semantic Information & Knowledge Extraction I Chair(s): Gerald M. Knapp (Lousiania State University), Leili Javadpour (Lousiania State University) Time & Place: T200 Room: Flamingo A

Semantic Scene Understanding Mehdi Khazaeli (Louisiana State University), Leili Javadpour (Lousiania State University), Gerald M. Knapp (Lousiania State University) Abstract No. 765 *

Detecting Controversial Topic Trends in Social Media Rajshekhar Chimmalgi (Louisiana State University), Gerald M. Knapp (Lousiania State University) Abstract No. 957 *

Multimodal Affect Analysis for Product Feedback Assessment Amol Patwardhan (Louisiana State University), Gerald M. Knapp (Lousiania State University) Abstract No. 1325 *

Track: Computers and Information Systems Session: Organizational Modeling and Analysis Chair(s): Gewei Zhang (University of Tennessee, Knoxville) Time & Place: T200 Room: Flamingo B

Multi-Agent System for Manpower Modeling Angela Garza (Pennsylvania State University), Jay D. Martin (The Applied Resarch Laboratory), Daniel A. Finke (The Applied Resarch Laboratory), Soundar Kumara (The Pennsylvania State University) Abstract No. 1102

Requirements for an Organizational Architecture for Pulp and Paper Industry Giovani Antonio Bordini (Pontifícia Universidade Católica do Paraná), Eduardo Alves Portela Santos (PUCPR), Eduardo Rocha Loures (Pontifical Catholic University of Parana) Abstract No. 1111

Natural Interaction Based Measuring System for Food Package Layout Optimization Gewei Zhang (University of Tennessee, Knoxville), Rupy Sawhney (The University of Tennessee), Sima Maleki (University of Tennessee - Knoxville) Abstract No. 1049

Track: Manufacturing and Design Session: Lean Manufacturing Systems -II Chair(s): Liang Zhang (University of Wisconsin - Milwaukee) Time & Place: T200 Room: Flamingo C

Bottleneck Analysis in Multi-Product Bernoulli Lines Cong Zhao (University of Wisconsin - Madison), Jingshan Li (University of Wisconsin - Madison) Abstract No. 930

Analysis of Production Completion Time in Bernoulli Serial Lines with Finite Buffers Guorong Chen (University of Wisconsin-Milwaukee), Liang Zhang (University of Wisconsin - Milwaukee), Jorge Arinez Abstract No. 1298

| Welcome to the IIE Annual Conference & Expo 201398

ISERC Sessions

Searching The Experimental Region Where a Metamodel Fits Best Jean Rivera-Nazario (University of Puerto Rico Mayaguez Campus), Mauricio Cabrera-Ríos (University of Puerto Rico, Mayaguez Campus) Abstract No. 1313

Methodology for Feature Modeling and Cost Estimation of Large Cast Parts Dusan Sormaz (Ohio University), Patrick Gannon (Ohio University), Saikishore Pulugurta (Ohio University) Abstract No. 1368

Track: Modeling and Simulation Session: Simulation Modeling and Analysis II Chair(s): Leonardo Bedoya-Valencia (Colorado State University - Pueblo) Time & Place: T200 Room: Flamingo D

Model-Based Systems Engineering for Distributed Hybrid Simulation Modeling John Pastrana (University of Central Florida), Mario Marin (University of Central Florida), Rebeca Caceres (International Maritime University of Panama), Hector Mendoza (Universidad Maritima Internacional de Panama), Oloruntomi Joledo (University of Central Florida), Sayli Bhide (University of Central Florida), Adan Vega (Universidad Tecnológica de Panamá), Albert Jones (National Institute of Standards and Technology), Neslin Arce (Buffete Juridico Internacional) Abstract No. 413

An Immersive Simulation Environment for Testing Novel EDIS designs Sabrina Casucci (University at Buffalo, SUNY), Longsheng Sun (University at Buffalo (SUNY)), David Lavergne ( University at Buffalo, SUNY), Li Lin (University at Buffalo), Ann Bisantz (University at Buffalo) Abstract No. 595

Adoption Strategies of Renewable Energy Sources in La Guajira Colombia Edgar Ojeda-Camargo (University of La Guajira), Helman Hernandez-Riaño (University of Cordoba), Leonardo Bedoya-Valencia (Colorado State University - Pueblo) Abstract No. 1308

Track: Quality and Reliability Engineering Session: Methods and Algorithms for Effective Quality Management Chair(s): Julie Drzymalski (Western New England University) Time & Place: T200 Room: Guayacan

Novel Predictive Risk-Based Algorithm for Data-Driven Surveillance Frequency of Suppliers Natalia Espino (University of Texas at El Paso), David Romo (UTEP), Bill Tseng (The University of Texas at El Paso), Ricardo Pineda Abstract No. 736

An empirical study of the effectiveness of Quality awards in the GCC Amr Alamri (Wayne State University - Saudi Ministry of Higher Education), Kai Yang (Wayne State Univeristy) Abstract No. 954

Foundational Model for a Software Quality Rating System Karthik Murali (Western New England University), Julie Drzymalski (Western New England University) Abstract No. 1125

Improving Efficiency of Organizational Reliability Engineering Knowledge using Keywords Gaurav Nanda (Purdue University), Jonathan Tan, Peter Auyeung, Mark Lehto (Purdue University) Abstract No. 779

www.iienet.org/annual | 99 99

ISERC Sessions

Track: Supply Chain and Logistics Session: Transportation Chair(s): Navneet Vidyarthi (Concordia University) Time & Place: T200 Room: Maguey

Headway Allowance in Positive Train Control Lunce Fu (University of Southern California), Maged Dessouky (University of Southern California) Abstract No. 344

Load Mixing with Stacking Constraints and Freight Due Dates Crystal Wilson (University of Arkansas), Sarah Root (University of Arkansas) Abstract No. 555

Fleet Re-Assignment and Capacity Planning in the Industrial Gas/Liquid Manufacturing Business Karthik Thyagarajan (University at Buffalo ), Mark Karwan (University at Buffalo) Abstract No. 705

Reliable Hub Location Under the Risk of Hub Disruptions Navneet Vidyarthi (Concordia University), Nader Azizi (University of Kent), Satyaveer Chauhan (Concordia University) Abstract No. 1360

Track: Energy Session: Wind Power Modeling-I Chair(s): Akiner Tuzuner (Istanbul Kemerburgaz University) Time & Place: T200 Room: Salon del Mar A

Optimizing Operation of Wind Farm coupled to CCS Coal Plant Rubenka Bandyopadhyay (Duke University), Dalia Patino-Echeverri (Duke University) Abstract No. 423

A Mean-Variance Model of Integrated Wind Farm Site and Turbine Portfolio Selection Akiner Tuzuner (Istanbul Kemerburgaz University), Fikret Korhan Turan (Istanbul Kemerburgaz University), Selcuk Goren (Istanbul Kemerburgaz University) Abstract No. 758

Track: Human Factors and Ergonomics Session: Upper Extremity Ergonomics Chair(s): Joseph Akyeampong (North Carolina A&T State University) Time & Place: T200 Room: Salon del Mar B

Upper Extremity Kinematics During Wrench Turning Tasks Joseph Akyeampong (North Carolina A&T State University), Hanniebey Wiyor (North Carolina A & T State University), Zongliang Jiang (North Carolina A&T State University) Abstract No. 267

Effects of Wearing Six-Inch Stilettos vs. Wedges on Muscle Activity Emma Atilola (North Carolina A&T State University), Jacqueline Bethea (North Carolina A&T State University), Regina PopeFord (North Carolina A&T State University), Patricia Banks (North Carolina A&T State University), Zongliang Jiang (North Carolina A&T State University) Abstract No. 1024

Pressure Mapping of the Palm While Handling Liquid in a Pot Farhana Proma (University of Texas at Arlington), Sheik Imrhan (University of Texas at Arlington) Abstract No. 1215

| Welcome to the IIE Annual Conference & Expo 2013100

ISERC Sessions

Track: Engineering Education Session: Undergraduate Student Enrichment - Research & Study Abroad Chair(s): Eileen Van Aken (Virginia Tech) Time & Place: T200 Room: Tropical A

Experiences with Increasing Undergraduate Research Participation Eileen Van Aken (Virginia Tech), Jaime Camelio (Virginia Tech) Abstract No. 275 *

Role Modeling, Motivating, and Mentoring: Advising Undergraduate Research Assistants Sara McComb (Purdue University) Abstract No. 296 *

Service Learning Abroad: the Value of Global Studies Megan Peters (University of Arkansas) Abstract No. 1243

Global Engineering Education Exchange – Perspectives and Challenges Layek Abdel-Malek (New Jersey Institute of Technology), Roberto Montanari (Parma University, Italy), Hoang Pham (Rutgers) Abstract No. 864

Track: Engineering Management Session: Transportation & Logistics Management Chair(s): Heather Nachtmann (University of Arkansas) Time & Place: T200 Room: Tropical B

Examining the Efficiency of Multimodal Transportation Systems: A Systems Dynamics Approach Lizzette Pérez-Lespier (Missouri University of Science and Technology), Suzanna Long (Missouri University of Science and Technology) Abstract No. 442 *

Applying Alternative Decision-making Approaches to a Complex Supplier Selection Problem Paul Componation (Iowa State University), Michael Dorneich (Iowa State University), Guiping Hu (Iowa State University), Gillian Nicholls (University of Alabama in Huntsville) Abstract No. 443 *

Multi-attribute Decision Model for Cargo Prioritization within Inland Waterway Transportation Jingjing Tong (University of Arkansas), Heather Nachtmann (University of Arkansas) Abstract No. 444 *

Track: Facility Logistics Session: Facility Logistics IV - Applications Chair(s): Sunderesh Heragu (University of Louisville) Time & Place: T200 Room: Tropical C

EMS Dispatcher Application Mehdi Zakerifar (University of Louisville), Farshad Majzoubi (University of Louisville), Sunderesh Heragu (University of Louisville), Lihui Bai (University of Louisville) Abstract No. 447

SNS Network Location and Routing Application Phani Polina (University of Louisville), Yepeng Sun (University of Louisville), Sunderesh Heragu (University of Louisville), Anala Pandit (University of Louisville) Abstract No. 428

www.iienet.org/annual | 101 101

ISERC Sessions

A State-of-the-Art Matrix Analysis of Bucket Brigade Sadia Quader (UTSA), Krystel Castillo (University of Texas at San Antonio) Abstract No. 1305

Track: Engineering Economy Session: Business Investment Strategies Chair(s): Erick Jones (University of Texas at Arlington) Time & Place: T330 Room: Ceiba

Predicting the Success of Mergers in the Banking Industry Harish Nair (Binghamton University ), Susan Lu (Binghamton University ), Huitian Lu (South Dakota State University) Abstract No. 726

A Study of Price Point Failures of Common Platform Appliances Nathan Baker (Indiana State University), M. Affan Badar (Indiana State University) Abstract No. 721

Improving Purchase Quantities of Commodities Using a Derivative Price Prediction Model Isaac Faber (United States Military Academy ) Abstract No. 1226

Implementation of Six Sigma Initiative: An Economic Perspective Erick Jones (University of Texas at Arlington), Vettrivel Gnaneswaran (University of Wisconsin-Platteville) Abstract No. 1449 *

Track: Healthcare Systems Session: Improving Donor Organ Ultilization and Transplant Success Chair(s): Maria Mayorga (Clemson University) Time & Place: T330 Room: Conf Center B

Identifying Predictor Variables for the Success of Heart Transplants Ali Dag (Auburn University), Fadel Megahed (Auburn University), Asil Oztekin (University of Massachusetts Lowell), Ahmet Yucel (Auburn University) Abstract No. 515

Assessing the Uncertain Future of Liver Transplant Maria Mayorga (Clemson University), Hector Toro (Clemson University), Stephanie Wheeler (University of North Carolina at Chapel Hill), Sidney Barritt (The University of North Carolina at Chapel Hill), Eric Orman (University of North Carolina at Chapel Hill) Abstract No. 985

Equity, Efficiency and Utilization in Kidney Allocation Philip Appiah Kubi (Ohio University), Namkyu Park (Ohio University), Isaac Atuahene (University Of Tennessee) Abstract No. 1133

Track: Healthcare Systems Session: Logistics and Supply Chain Management Chair(s): Seth Hostetler (Geisinger Health System) Time & Place: T330 Room: Conf Center C

The Supply Chain Architecture for Autologous Cell Therapy Zhuo Tan (North Carolina State University), Richard Wysk (North Carolina State University), Rohan Shirwaiker (North Carolina State University), Michael Kay (North Carolina state University) Abstract No. 478

Modeling the Stochastic Healthcare Facility Configuration Problem Xue Han (Texas A&M University), Wilbert Wilhelm (Texas A&M University) Abstract No. 683

| Welcome to the IIE Annual Conference & Expo 2013102

ISERC Sessions

A ROI Model for Healthcare Provider GS1 Standards Adoption Mehmet Kilinc (University of Arkansas), Nebil Buyurgan (University of Arkansas) Abstract No. 1218

A Simulation Model for Blood Supply Chain Systems Evrim Yuzgec (State University of New York at Binghamton), Ying Han (State University of New York at Binghamton), Nagen Nagarur (Binghamton University) Abstract No. 995

Track: Healthcare Systems Session: Screening and Early Prevention II Chair(s): Grisselle Centeno (University of South Florida) Time & Place: T330 Room: Conf Center D

Prediction of Cancer Patient Radiosensitivity using Genomic Expressions Florentino Rico (University of South Florida), Grisselle Centeno (University of South Florida) Abstract No. 984

An Artificial Intelligence Approach for Breast Cancer Early Risk Assessment Ying Han (State University of New York at Binghamton), Evrim Yuzgec (State University of New York at Binghamton), Mohammad Khasawneh (State University of New York at Binghamton) Abstract No. 1081

Optimal Screening Policies for Cervical Cancer Prevention in Colombia Martha Isabel Namen Leon (Universidad de los Andes), Raha Akhavan-Tabatabaei (Universidad de Los Andes), Luz Marcela Cellis Amortegui (Universidad del Bosque) Abstract No. 1132

Simulation of Breast Cancer Occurrence and Progression in the Presence of Screening Laurent N. Caudrelier (University of Toronto), Sharareh Taghipour (Ryerson University), Anthony B. Miller (University of Toronto), Bart J. Harvey (University of Toronto), Dragan Banjevic (University of Toronto), Andrew K.S. Jardine (University of Toronto) Abstract No. 1436

Track: Homeland Security Session: Maritime Security Chair(s): Xiuli Qu (North Carolina A&T State University) Time & Place: T330 Room: Conference 3

A Cargo Prioritization Model for Inland Waterway Disruptions Jingjing Tong (University of Arkansas), Heather Nachtmann (University of Arkansas) Abstract No. 507 *

Evaluating and Comparing Port Security Screening Policies Using Simulation Carrie Ann Boles (North Carolina Agricultural and Technical State University), Eric King (North Carolina Agricultural and Technical State University), Xiuli Qu (North Carolina A&T State University), Lauren Davis (North Carolina A&T State University), D'Javon Alston (North Carolina A&T State University) Abstract No. 508 *

An Interactive Decision Making Tool for Port Security Policy Jessye Bemley (North Carolina A&T State University), Lauren Davis (North Carolina A&T State University), Eric King (North Carolina Agricultural and Technical State University), Carrie Ann Boles (North Carolina Agricultural and Technical State University), Xiuli Qu (North Carolina A&T State University), Raquel Teasley (North Carolina A&T State University) Abstract No. 526 *

www.iienet.org/annual | 103 103

ISERC Sessions

Track: Social, Environmental and Sustainability Session: Sustainable Services Chair(s): Humberto Alvarez (Technological University of Panama) Time & Place: T330 Room: Conference 4/5

Systematic literature review: Environmental Impacts of Healthcare Facilities and Practices Mohammad Amin Esmaeili (Wichita State University), Janet Twomey (Wichita State University), Michael Overcash (Wichita State University), Michael McGuire (University of Tulsa), Reda Bennani (Wichita State University) Abstract No. 944

FF-ANN Estimations for Supermarket Donations in Absence of Information Sharing Luther Brock (North Carolina A&T State University), Lauren Davis (North Carolina A&T State University) Abstract No. 924

An SDP-Greedy Algorithm for the Key Player Problem Wentao Wu (RPI), Victor Wai Kin Chan (Rensselaer Polytechnic Institute), Lei Chi (RPI) Abstract No. 1355

Contested Rezoning from a Game Theory and Stakeholder Analysis Perspective Joseph Bradley (NCSOSE/ODU), Patrick Hester (Old Dominion University) Abstract No. 496

Social Network Analysis for Humanitarian Logistics Operations in Latin America Humberto Alvarez (Technological University of Panama), Marco Serrato (Tecnologico de Monterrey) Abstract No. 1416

Track: Production Planning and Scheduling Session: Production Planning and Scheduling 13 Chair(s): Reha Uzsoy (North Caroina State University) Time & Place: T330 Room: Conference 6

Using Clearing Functions in Production Planning Formulations for Large-scale Wafer Fabs Baris Kacar (North Carolina State University), Lars Moench (University of Hagen), Reha Uzsoy (North Caroina State University) Abstract No. 373

Minimizing End Effects in Rolling Horizon Algorithms for Production Planning: An Experimental Study Po-Chen Lin (North Carolina State University), Reha Uzsoy (North Caroina State University) Abstract No. 431

Scheduling Mass Customized Large Scale Production Considering Learning Effect and Due Date KuoWei Chen (University of Washington), Richard Storch (University of Washington) Abstract No. 469

Track: Process Industries Session: Quality Control in Process Industries Chair(s): Chia-Jung Chang (Pennsylvania State University) Time & Place: T330 Room: Conference 7

SPC for Broaching Process Based on Global and Cyclic Signals Wenmeng Tian (Virginia Tech), Tingting Huang (Virginia Tech), Jaime Camelio (Virginia Tech), Ran Jin (Virginia Tech.) Abstract No. 1033

Process Capability Analysis using Fuzzy inference System Mohammad Rahman (The University of Southern Mississippi), John Hannon (University of Southern Mississippi), Faisal Mallum (University of Southern Mississippi) Abstract No. 1202

| Welcome to the IIE Annual Conference & Expo 2013104

ISERC Sessions

Continuous Crystal Growing Process Modeling for Quality Improvements Hongyue Sun (Virginia Tech), Kaibo Wang (Tsinghua University), Xinwei Deng (Virginia Tech), Ran Jin (Virginia Tech.) Abstract No. 711

Track: Service Systems Session: Service Systems I Chair(s): Nazrul Shaikh (University of Miami) Time & Place: T330 Room: Conference 8+9

Performance-Based Service: Contracting for Operational Availability or Parts Availability? Tongdan Jin (Texas State University), Kranthi Katepalli (Texas State University) Abstract No. 104 *

Forecasting of Visitors Staying Overnight at Grand Canyon National Park Girish Upreti (University of Tennessee), Rupy Sawhney (The University of Tennessee), Isaac Atuahene (University Of Tennessee), shuguang Ji (University of Tennessee) Abstract No. 1165

Service Level and Operation Time in Technical Repair System JOSE L ACERO CHAVEZ (UNIVERSITY OF PUERTO RICO), TERESA LONGOBARDI (co-author) Abstract No. 1068

Demand Estimation in Assortment Planning Under Dynamic Stockout-Based Substitution Nazrul Shaikh (University of Miami), LIHUA BAI (University of Miami) Abstract No. 1087

Track: Supply Chain and Logistics Session: Supply Chain Risk Management Chair(s): Aman Gupta (Embry-Riddle Aeronautical University - WorldWide) Time & Place: T330 Room: Flamboyan

Risk Assessment of a Just-in-time Supply Chain Tarick Elsadig (Southern Illinois University Edwardsville), Xin Chen (Southern Illinois University Edwardsville) Abstract No. 142 *

Supply Chain Risk Management Associated with Financial Flow Ronald Mau (Embry-Riddle Aeronautical University - WorldWide), Aman Gupta (Embry-Riddle Aeronautical University - WorldWide) Abstract No. 66

Capacity Investment and Pricing Under Exchange Rate Uncertainty and Competition Murat Erkoc (University of Miami), Anas Ahmed (King Abdulaziz University), Vecihi Yigit (Ataturk University) Abstract No. 1267

Spare Parts Management by Using Analytic Hierarchy Process Khaled Gad El Mola (Department of Mechanical Engineering, Faculty of Engineering, Helwan, Cairo, Egypt and Department of Mechanical Engineering, Industrial Engineering Program, College of Engineering in Al Kharj, Salman Bin Abdul-Aziz University, KSA), Emad Abouel Nasr (Department of Mechanical Engineering, Faculty of Engineering, Helwan, Egypt and College of Engineering, King Saud University), Abdulaziz El-Tamimi (King Saud University, College of Engineering) Abstract No. 93

www.iienet.org/annual | 105 105

ISERC Sessions

Track: Computers and Information Systems Session: Semantic Information & Knowledge Extraction II Chair(s): Gerald M. Knapp (Lousiania State University) Time & Place: T330 Room: Flamingo A

Evidence Fusion in Coreference Resolution Leili Javadpour (Lousiania State University), Mehdi Khazaeli (LSU), Gerald M. Knapp (Lousiania State University) Abstract No. 775 *

Discourse Structure Identification for Knowledge Extraction Jamie Guidry (Louisiana State University), Leili Javadpour (Lousiania State University), Gerald M. Knapp (Lousiania State University) Abstract No. 843 *

Automatic Semantic Content Enrichment of Sensor Network Based Information Ricardo Calix (Purdue University Calumet), Dustin Franz (Purdue University Calumet), Leili Javadpour (Lousiania State University) Abstract No. 796 *

Track: Manufacturing and Design Session: Manufacturing Process Planning - I Chair(s): Christopher Greene (Rochester Institute of Technology) Time & Place: T330 Room: Flamingo B

Development of Expert Networks - Predictor of Manufacturing Parameters: Initial Study Christopher Greene (Rochester Institute of Technology), Quinte Osborne (RIT) Abstract No. 1477

Data and Information Fusion for Multi-Stage Design and Manufacturing Systems Yuan-Shin Lee (North Carolina State University), Yi Cai (North Carolina State University), Xiaofeng Qin (North Carolina State University) Abstract No. 1415

A Process Planning Framework for LENS Metal Additive Manufacturing Eric Chernow (Penn State University), Matt Samperi (Penn State University), Sanjay Joshi (The Pennsylvania State University), Timothy Simpson (Penn State University), Edward Reutzel (Penn State University), Rich Martukanitz (Penn State University) Abstract No. 1465

Track: Manufacturing and Design Session: Manufacturing Process Planning - II Chair(s): John Usher (Mississippi State University) Time & Place: T330 Room: Flamingo C

A Virtual Predictive Environment for Monitoring Reliability and Maintainability of Printed Circuit Boards Amer Dababneh (The University of Iowa), Ibrahim Tarik Ozbolat (The University of Iowa) Abstract No. 11

Automatic Execution of Inspection Plan for Prismatic Parts in Online Manufacturing Abdulrahman Al-Ahmari (Industrial Engineering Department, College of Engineering, King Saud University), Emad Abouel Nasr (Department of Mechanical Engineering, Faculty of Engineering, Helwan, Egypt and College of Engineering, King Saud University), Ali Kamrani (University of Houston), Osama Abdulhameed (Industrial Engineering Department, College of Engineering, King Saud University) Abstract No. 68

Deetermining Job Complexity for the Engineer to Order Environment John Usher (Mississippi State University), Doug Grabenstetter (Siemens) Abstract No. 445

| Welcome to the IIE Annual Conference & Expo 2013106

ISERC Sessions

Track: Quality and Reliability Engineering Session: Quality Control and Applications Chair(s): Mark Haynes (Kansas State University) Time & Place: T330 Room: Guayacan

3D non-contact profilometry for reinforcement steel quality control Mark Haynes (Kansas State University), Chih-Hang Wu (Kansas State University), Terry Beck (Kansas State University), Robert Peterman (Kansas State University) Abstract No. 539

DPMO Really Does Make Cents Janet Sanders (East Carolina University) Abstract No. 1340

E-quality Management (EQM) in Solar Panel Using 3D Measurement and Photometric Stereo Reconstruction Approach Natalia Espino (University of Texas at El Paso), Bill Tseng (The University of Texas at El Paso), Chun-Che Huang (National Chi Nan University), Jun Zheng (University of Texas at El Paso), Juan Venegas Mendez (UTEP), Kym Fraser (UNISA), Paras Mandal (The University of Texas at El Paso), Richard Chiou (Drexel University), Johnny C. Ho (Columbus State University) Abstract No. 749

Integrating Multiobjective Optimization with Six Sigma for Online Process Control Emad Abualsauod (UCF), Christopher Geiger (University of Central Florida) Abstract No. 1345

Track: Energy Session: Wind Power Modeling-II Chair(s): Jose Francisco Espiritu Nolasco (The University of Texas at El Paso) Time & Place: T330 Room: Salon del Mar A

Offshore Wind Farm Layout Optimization: What is the Hype? Mohammad H. Poursaeidi (University of Houston), Michele Samorani (University of Alberta), Erhun Kundakcioglu (University of Houston) Abstract No. 952

Considering Wind-Wake and Reliability as Multi-State System Carlos Ituarte-Villarreal (The University of Texas at El Paso), Jose Francisco Espiritu Nolasco (The University of Texas at El Paso) Abstract No. 1306

Wind Farm Layout Optimization Considering Multiple-Objectives Jose Francisco Espiritu Nolasco (The University of Texas at El Paso), Carlos Ituarte-Villarreal (The University of Texas at El Paso), Nicolas Lopez (The University of Texas at El Paso), Heidi Taboada Jimenez (The University of Texas at El Paso) Abstract No. 1442

Track: Human Factors and Ergonomics Session: Usability Potpourri Chair(s): Randa Shehab (University of Oklahoma) Time & Place: T330 Room: Salon del Mar B

User-centered Systems Engineering Approach to Design and Modeling of Smarter Products Tareq Ahram (University of Central Florida), Waldemar Karwowski (UCF), Ben Amaba (IBM) Abstract No. 611

Usability Evaluation of a Paratransit Management System Randa Shehab (University of Oklahoma), Elizabeth Mintmire (University of Oklahoma), Chen Ling (University of Oklahoma) Abstract No. 978

www.iienet.org/annual | 107 107

ISERC Sessions

A Quantitative Approach to Measure Usability in Multiple-Device Systems Yunchen Huang (Mississippi State University), Lesley Strawderman (Mississippi State University) Abstract No. 1056

Track: Engineering Education Session: IE Curriculum and Course Content Chair(s): Saylisse Davila (University of Puerto Rico-Mayaguez) Time & Place: T330 Room: Tropical A

An Outcome-Based curriculum design approach for an Industrial Engineering Program curriculum revision Aidsa Santiago-Román (University of Puerto Rico, Mayaguez Campus), Cristina Pomales-García (University of Puerto Rico Mayaguez), Viviana Cesani (University of Puerto Rico) Abstract No. 339 *

Student misconceptions of probability and statistics problems: A Case Study Cristina Pomales-García (University of Puerto Rico Mayaguez), Yadrianna Acosta-Sojo (University of Puerto Rico Mayaguez) Abstract No. 340 *

Role of Interactive Response Systems (Clickers) on Problem Based Learning (PBL) Hulya Yazici (FGCU) Abstract No. 342 *

Development of an Educational Game for Industrial Engineering Freshman Students David Bengoa (Presenter), Agustin Rullan (Co-Author - University of Puerto Rico - Mayagüez), Bienvenido Velez (Co-Author), Cristina Pomales-García (University of Puerto Rico Mayaguez), Felix Zapata (Co-Author) Abstract No. 674

Track: Engineering Management Session: Supply Chain and Logistics Management Chair(s): Vettrivel Gnaneswaran (University of Wisconsin-Platteville) Time & Place: T330 Room: Tropical B

Transportation Model for Ethanol Production in the Midwest Anali Huggins (Montana State University), Vettrivel Gnaneswaran (University of Wisconsin-Platteville) Abstract No. 1295 *

Driving Re-shoring of Manufacturing Activities through Total Cost of Ownership William Achia (University of Wisconsin-Platteville), Vettrivel Gnaneswaran (University of Wisconsin-Platteville) Abstract No. 1344

Evaluating the Impacts of Carbon Footprint for Public Transportation System William Achia (University of Wisconsin-Platteville), Vettrivel Gnaneswaran (University of Wisconsin-Platteville) Abstract No. 1208

Value Centered Systems Management for Global Supply Chain Operations S. Gary Teng (The University of North Carolina at Charlotte) Abstract No. 1044

Track: Engineering Management Session: Energy and Sustainability Chair(s): Suzanna Long (Missouri University of Science and Technology) Time & Place: T330 Room: Tropical C

The Impact of Regulation on Utility Investment in Smart Grid Technology Sean Schmidt (Missouri University of Science and Technology), Suzanna Long (Missouri University of Science and Technology) Abstract No. 1212

| Welcome to the IIE Annual Conference & Expo 2013108

ISERC Sessions

Development of a Cooling Load Model for Geospatial Analysis of Energy Efficient Technology in Austere Environments D. Jason Murley (Air Force Institute of Technology), Alfred E. Thal, Jr. (Air Force Institute of Technology), L. James Wyatt (Air Force Institute of Technology), Tay Johannes (Air Force Institute of Technology), Adedeji Badiru (Air Force Institute of Technology ) Abstract No. 1373

Life-Cycle Assessment of LEED vs. Conventionally Constructed Residential Units Woo-Suk Chun (Air Force Institute of Technology), Peter Feng (Air Force Institute of Technology), Alfred E. Thal, Jr. (Air Force Institute of Technology), Adedeji Badiru (Air Force Institute of Technology ) Abstract No. 1378

Track: Healthcare Systems Session: Routing and Transport Chair(s): Seth Hostetler (Geisinger Health System) Time & Place: T500 Room: Conf Center C

Impact of Patients Priority and Resource Availability in Ambulance Dispatching Arun Mohan Gnanasekaran (Purdue University), Mohammad Moshref-Javadi (Purdue University), Hao Zhang (Purdue University), Mohsen Moghaddam (Purdue University), Seokcheon Lee (Purdue University) Abstract No. 328

A Heuristic Method for Transporting Patients to Hospitals Farshad Majzoubi (University of Louisville), Lihui Bai (University of Louisville), Sunderesh Heragu (University of Louisville) Abstract No. 670

Development of Operational Strategies for On-Demand Meal Delivery in Healthcare Caitlin Cronk (The Pennsylvania State University), Seth Hostetler (Geisinger Health System), Deborah Medeiros (The Pennsylvania State University ) Abstract No. 1104

Track: Healthcare Systems Session: Readmissions Chair(s): Saeede Ajorlou (WAYNE STATE UNIVERSITY) Time & Place: T500 Room: Conf Center D

A Patient Readmission Risk Prediction Model issac shams (WAYNE STATE UNIVERSITY), Saeede Ajorlou (WAYNE STATE UNIVERSITY), Kai Yang (Wayne State university) Abstract No. 488

A Comprehensive Probabilistic Framework for Prediction of Patients’ Readmission to Medial Centers Adel Alaeddini (University of Texas at San Antonio), Kai Yang (Wayne State university) Abstract No. 730

Identifying Factors to Reduce Preventable Readmissions among Congestive Heart Failure Patients Florentino Rico (University of South Florida), Liu yazhuo (University of South Florida), Diego Martinez (University of South Florida), Jose Luis Zayas-Castro (USF) Abstract No. 973

Track: Social, Environmental and Sustainability Session: Sustainability and Higher Education Chair(s): Micheal Fearon (Ryerson university/ York university ) Time & Place: T500 Room: Conference 4/5

Investigation of foundational sustainability courses at AASCU-member colleges and universities: comparison of courses across multiple academic disciplines Gregory Weisenborn (Ft. Hays State University) Abstract No. 1328

www.iienet.org/annual | 109 109

ISERC Sessions

Education in Emergency Management Micheal Fearon (Ryerson university/ York university ) Abstract No. 1041

Track: Production Planning and Scheduling Session: Production Planning and Scheduling 15 Chair(s): Ertunga Ozelkan (The University of North Carolina at Charlotte) Time & Place: T500 Room: Conference 6

Machine Scheduling to Maximize Customer Satisfaction Considering Customer-Job Relations Aslican Arinsoy (Ohio University), Gürsel Süer (Ohio University) Abstract No. 541

Bi-Objective Optimization for Aggregate Planning with Flexibility Requirements Profile Edil Demirel (The University of North Carolina at Charlotte), Ertunga Ozelkan (The University of North Carolina at Charlotte), Churlzu Lim (University of North Carolina at Charlotte) Abstract No. 715

Track: Process Industries Session: Optimization and Modeling in Process Industries Chair(s): Xiupeng Wei (University of Iowa) Time & Place: T500 Room: Conference 7

Optimization of vulcanized EPDM process by desirability function María Blanca Becerra Rodríguez (CIATEC. A. C), Roberto Zitzumbo (CIATEC), Jorge Domínguez Domínguez (CIMAT unidad Aguascalientes), Jorge Luis Garcia Alcaraz (Universidad Autonoma de Ciudad Juarez), Anayansi Estrada Monje (CIATEC, A.C), Sergio Alonso (CIATEC) Abstract No. 1173

Optimization of wastewater pumping process with a data-driven approach Xiupeng Wei (University of Iowa), Xiaofei He (University of Iowa), Andrew Kusiak (University of Iowa) Abstract No. 1301

Heuristics for forest bucking problems Satyaveer Chauhan (Concordia University) Abstract No. 1428

Track: Service Systems Session: Service Systems II Chair(s): Guzin Bayraksan (The Ohio State University) Time & Place: T500 Room: Conference 8+9

Lens Model for Designer and Manger Conflict in Service Design Sameer Tabbakh (North Carolina A&T State University), Younho Seong (NC A&T State University), Paul Stanfield (North Carolina A&T State University) Abstract No. 1211

A Likelihood Robust Method for Water Allocation under Uncertainty Guzin Bayraksan (The Ohio State University), David Love (University of Arizona) Abstract No. 1198

Asset-Based Approach for Customer-Centered Service Design Sameer Tabbakh (North Carolina A&T State University), Paul Stanfield (North Carolina A&T State University) Abstract No. 1214

Diffusion Dynamics over Small Worlds Nazrul Shaikh (University of Miami), Niva Shrestha (Market Fusion Analytics) Abstract No. 1395

| Welcome to the IIE Annual Conference & Expo 2013110

ISERC Sessions

Track: Supply Chain and Logistics Session: Biofuels Supply Chain Chair(s): Vettrivel Gnaneswaran (University of Texas at Arlington) Time & Place: T500 Room: Flamboyan

Developing A Hub-Based Supply Chain Design Model For Co-Fire of Densified Biomass and Coal Md Roni (Mississippi State University), Sandra Eksioglu (Mississippi State University), Erin Searcy (Idaho National Laboratory) Abstract No. 936

An Evolutionary Optimization Algorithm for Logistics System Design Considering Multiple Types of Feedstock Jesusita Ibarra (University of Texas at El Paso), Ethel Martinez (University of Texas at El Paso), Trueba Isidoro (University of Texas at El Paso), Heidi Taboada Jimenez (The University of Texas at El Paso) Abstract No. 1181

Optimization of a Sustainable Biofuel Supply Chain using an Evolutionary Algorithm Karla Gutierrez (The University of Texas at El Paso), Trueba Isidoro (University of Texas at El Paso), Valles Claudia (University of Texas at El Paso), Heidi Taboada Jimenez (The University of Texas at El Paso) Abstract No. 1359

A model for optimizing the allocation of ethanol production in the U.S. 2009 Anali Huggins (Montana State University), Vettrivel Gnaneswaran (University of Wisconsin-Platteville), Demet Batur (University of Nebraska-Lincoln) Abstract No. 807

Track: Computers and Information Systems Session: Semantic Information & Knowledge Extraction III Chair(s): Mehdi Khazaeli (Louisiana State University) Time & Place: T500 Room: Flamingo A

Semantic Entailment & Representation from Text Using a Probabilistic Logic Model Soha ArabKhazaeli (Louisiana State University), Gerald M. Knapp (Lousiania State University), Leili Javadpour (Lousiania State University) Abstract No. 947 *

Automatic Extraction of Ontology from Technical Journals Avimanyu Halder (LSU), Gerald M. Knapp (Lousiania State University) Abstract No. 1205 *

Heterogeneous Data Model Integration SIDOS - Architecture and Concept David Koonce (Ohio University), Arkopaul Sarkar (Ohio University) Abstract No. 654

Track: Manufacturing and Design Session: Manufacturing Process Planning - III Chair(s): Ying Han (State University of New York at Binghamton) Time & Place: T500 Room: Flamingo B

An Object Oriented Approach to CAPP-CAFP System for Prismatic Parts Emad Abouel Nasr (Department of Mechanical Engineering, Faculty of Engineering, Helwan, Egypt and College of Engineering, King Saud University), Abdulrahman Al-Ahmari (Industrial Engineering Department, College of Engineering, King Saud University), Ali Kamrani (University of Houston), Awais Khan (College of Engineering, King Saud University) Abstract No. 69

Layout Optimization: An Industrial Application Andrea Briggs (Northern Illinois University), Shanthi Muthuswamy (Northern Illinois University) Abstract No. 436

www.iienet.org/annual | 111 111

ISERC Sessions

Solar Cell Manufacturing Process Optimization Using Discrete Event Simulation Ying Han (State University of New York at Binghamton), Wen Cao (State University of New York at Binghamton ), Farhan Batieha (Binghamton University), Erika Rollins (Binghamton University), Nagen Nagarur (Binghamton University) Abstract No. 1175

Track: Manufacturing and Design Session: Manufacturing Process Planning - IV Chair(s): Dayana Cope (Eastman Chemical Company) Time & Place: T500 Room: Flamingo C

A Framework to Develop Cognitive Network Diagram from Design Knowledge Base Shah Limon (North Dakota State University), Om Prakash Yadav (North Dakota State University), Bimal Nepal (Texas A&M University, College Station, TX 80743) Abstract No. 887

Analysis of Process Layout Behavior under Different Manufacturing Strategies Ahmad Obeidat (State University of New York at Binghamton), Siyuan Gu (State University of New York at Binghamton), Shantanu Mukherjee (Binghamton University), Mohammad Samie Tootooni (State University of New York at Binghamton), Nagen Nagarur (Binghamton University) Abstract No. 1309

Production scheduling with sequence-dependent changeovers Dayana Cope (Eastman Chemical Company), Qingwei Li (Eastman Chemical Company) Abstract No. 1423

Track: Supply Chain and Logistics Session: Supply Chain Analysis and Design Chair(s): Marco Serrato (Tecnologico de Monterrey) Time & Place: T500 Room: Maguey

Supply Chain Flexibility Under Random Demand Wenbo Cai (NJIT), Layek Abdel-Malek (New Jersey Institute of Technology) Abstract No. 866

Impact of Supply Chain Bullwhip on Cash Flow Forecast Rattachut Tangsucheeva (The Pennsylvania State University), Vittal Prabhu (Penn State) Abstract No. 753

Outsourcing analysis in closed-loop supply chains for hazardous materials Marco Serrato (Tecnologico de Monterrey), Victor Rayas (Tecnologico de Monterrey) Abstract No. 1079

Track: Engineering Education Session: K-12 Education Chair(s): Robert Young (North Carolina State University) Time & Place: T500 Room: Tropical A

Evolution of Innovative Curriculum for Engineering in High School (ICE-HS) Shamsnaz Virani (Penn State Great Valley), Iris Burnham (Burnham Wood Charter School District) Abstract No. 1143

MINDSET: An NSF funded high school math course using Industrial Engineering tools Robert Young (North Carolina State University), Karen Keene (North Carolina State Univ), Kenneth Chelst (Wayne State University), Thomas Edwards (Wayne State University), Molly Purser (North Carolina State University) Abstract No. 505

| Welcome to the IIE Annual Conference & Expo 2013112

ISERC Sessions

Track: Engineering Management Session: Collaboration and Innovation Chair(s): Hulya Yazici (FGCU) Time & Place: T500 Room: Tropical C

A Systematic Architecture of Business Model Innovation Wilawan Onkham (University of Central Florida), Hulya Yazici (FGCU), Luis Rabelo (Department of Industrial Engineering and Management Systems University of Central Florida ) Abstract No. 346

Identification and analysis of organizational capacities for innovation: case study in manufacturing industry Graciela Caffarel (Tecnologico de Monterrey), Imelda de Jesus Loera-Hernandez (ITESM), Heriberto Garcia-Reyes (Tecnologico de Monterrey), Jose Manuel Castro Arroyo (ITESM), Myrna Flores (CEMEX) Abstract No. 816

Managing Diversity in Virtual Teams through Perspective Taking Nina Cristina Magpili (Old Dominion University), Pilar Pazos (Old Dominion University) Abstract No. 1000

www.iienet.org/annual | 113 113

ISERC Sessions

APPLIED SOLUTIONS

Session: Systems Engineering Track - Monday Chair(s): Jose Hernandez, John Deere; Jian Liu, University of Arizona Time & Place: M Room: San Cristobal F Rational Engineering Lifecycle Manager – Improved Insight from Distributed Engineering Data Amit Fisher (IBM), Sky Matthews (IBM Rational), Ben Williams (IBM Rational) Abstract No. A75

Session: Computer and Information Systems Track - Monday Chair(s): Seokcheon Lee, Purdue University; Hari Thiruvengada, Honeywell Time & Place: M800 Room: San Cristobal G Manufacturing Execution System (MES): An Examination of Implementation Strategy Reza Pouraghabagher (California Polytechnic State university), Riley Elliott (California Polytechnique State University) Abstract No. A99

Session: Construction Track - Monday Chair(s): Lincoln Forbes, East Carolina University; George Gardner, Virginia Department of Transportation Time & Place: M800 Room: Auditorium Too Many Deaths - The Need for Great Construction Work Systems Kevin McManus (Great Systems), Lincoln Forbes Abstract No. A221

Session: Health Systems Track - Monday Chair(s): Amanda Mewborn, Perkins+Will; Mary Ellen Skeens, Philips Healthcare Time & Place: M800 Room: San Cristobal F Driving Efficiency through Lean in Scheduling Advanced Radiology Exams Vanda Ametlli (Henry Ford Health System) Abstract No. A124

Session: IAB-Industry Advisory Board Track - Monday Chair(s): Katie Coperich, FedEx ; Joan Wagner, Spirit AeroSystems Time & Place: M800 Room: San Cristobal E What Leaders Look For In Promoting IE’s Into Management An IE Career Discussion Kazuo Takeda (Disneyland Resort) Abstract No. A12

Session: Process Industries Track - Monday Chair(s): Joe Paris, Xonitek Time & Place: M800 Room: San Cristobal B "Randomness Kills" - or at Least Cripples J Bennett Foster (DuPont Company), J. Bennett Foster (DuPont Co.) Abstract No. A30

Session: Simulation Track - Monday Chair(s): Danny Pavan, ArcelorMittal Dofasco; Ed Williams, PMC Time & Place: M800 Room: San Cristobal D Optimization of Bevel Gear Operations using Simulation Meredith Deneweth (Geometric Americas) Abstract No. A45

| Welcome to the IIE Annual Conference & Expo 2013114

Applied Solutions Sessions

Session: Sustainable Development Track - Monday Chair(s): Diana Berry, UPS Trade Management Services; Curtis Bush, Grass Valley Time & Place: M800 Room: San Cristobal C Engineering Government: a Look at Sustainable Politics Katherine Fisher (West Monroe Partners) Abstract No. A112

Session: Construction Track - Monday Chair(s): Lincoln Forbes, East Carolina University; George Gardner, Virginia Department of Transportation Time & Place: M840 Room: Auditorium Lean Construction is a Growth Area - Where Does That Leave You? Lincoln Forbes (East Carolina University) Abstract No. A168

Session: Health Systems Track - Monday Chair(s): Amanda Mewborn, Perkins+Will; Mary Ellen Skeens, Philips Healthcare Time & Place: M840 Room: San Cristobal F Bound for Flight: Achieving Organizational Excellence Leveraging Lean Management Airica Steed (University of Illinois Hospital & Health Sciences System) Abstract No. A40

Session: Simulation Track - Monday Chair(s): Danny Pavan, ArcelorMittal Dofasco; Ed Williams, PMC Time & Place: M840 Room: San Cristobal D Macro-Simulation of Traffic Management Options for a Major Sporting Event Robert Batson (University of Alabama ), Charles Cochran (University of Alabama) Abstract No. A7

Session: Sustainable Development Track - Monday Chair(s): Diana Berry, UPS Trade Management Services; Curtis Bush, Grass Valley Time & Place: M840 Room: San Cristobal C Modern PRT Systems evolve from a Boeing-built Prototype based on IE Analysis Gregory Brown (Boeing Commercial Airplanes) Abstract No. A195

Session: Construction Track - Monday Chair(s): Lincoln Forbes, East Carolina University; George Gardner, Virginia Department of Transportation Time & Place: M1100 Room: Auditorium Use of Holistic Quality Management Approach to Mitigate Construction Risks Al Attah, P.E. (MACVAL Associates, LLC ) Abstract No. A222

Session: Health Systems Track - Monday Chair(s): Amanda Mewborn, Perkins+Will; Mary Ellen Skeens, Philips Healthcare Time & Place: M1100 Room: San Cristobal F Health Systems Town Hall Mary Ellen Skeens (Philips ) Abstract No. A217

www.iienet.org/annual | 115 115

Applied Solutions Sessions

Session: IAB-Industry Advisory Board Track - Monday Chair(s): Katie Coperich, FedEx ; Joan Wagner, Spirit AeroSystems Time & Place: M1100 Room: San Cristobal E Informal Leadership Sean Genovese (The Boeing Company) Abstract No. A202

Session: Construction Track - Monday Chair(s): Lincoln Forbes, East Carolina University; George Gardner, Virginia Department of Transportation Time & Place: M1140 Room: Auditorium Using 3D Computer Simulation to Improve Construction Project Planning Patrick Cloutier (Patrick Cloutier Conseil), Patrick Cloutier (Patrick Cloutier Conseil) Abstract No. A18

Session: Computer and Information Systems Track - Monday Chair(s): Seokcheon Lee, Purdue University; Hari Thiruvengada, Honeywell Time & Place: M1230 Room: San Cristobal G Real Time Factory Machine Intelligence Martin Stein (Martin Stein Associates) Abstract No. A10

Session: Process Industries Track - Monday Chair(s): Joe Paris, Xonitek Time & Place: M1230 Room: San Cristobal B IIE PID 2013 Town Hall Meeting Rick Hulse (XONITEK Consulting Group Int'l LLC) Abstract No. A225

Session: Simulation Track - Monday Chair(s): Danny Pavan, ArcelorMittal Dofasco; Ed Williams, PMC Time & Place: M1230 Room: San Cristobal D An Innovative Approach in Developing a Shop Floor Schedule for a Complex Manufacturing System Jose Colon Perez (Amgen) Abstract No. A186

Session: Process Industries Track - Monday Chair(s): Joe Paris, Xonitek Time & Place: M110 Room: San Cristobal B Reduction of Greenhouse Gas Emissions in the Oil and Gas Industry Joseph Paris (XONITEK Group of Companies) Abstract No. A100

Session: Sustainable Development Track - Monday Chair(s): Diana Berry, UPS Trade Management Services; Curtis Bush, Grass Valley Time & Place: M110 Room: San Cristobal C How Do We Measure Success in Creating Sustainability? A Panel Discussion Diana Berry (UPS), John Corliss (PEER Consultants) Abstract No. A228

| Welcome to the IIE Annual Conference & Expo 2013116

Applied Solutions Sessions

Session: Computer and Information Systems Track - Monday Chair(s): Seokcheon Lee, Purdue University; Hari Thiruvengada, Honeywell Time & Place: M200 Room: San Cristobal G CIS Town Hall Seokcheon Lee (Purdue University) Abstract No. A216

Session: Construction Track - Monday Chair(s): Lincoln Forbes, East Carolina University; George Gardner, Virginia Department of Transportation Time & Place: M200 Room: Auditorium Occupant’s Behavior and Programmable Thermostat Isabelina Nahmens (Louisiana State University), Alireza Joukar (Louisiana State University), John Michael Domingo (Louisiana Sate University) Abstract No. A29

Session: Engineering Management Track - Monday Chair(s): Mark Jannone, Atlantic Health System; Haleh Byrne, North Carolina State University – IES Time & Place: M200 Room: San Cristobal D Society for Engineering Management Systems Town Hall Meeting Mark Jannone (Atlantic Health System) Abstract No. A226

Session: Health Systems Track - Monday Chair(s): Amanda Mewborn, Perkins+Will; Mary Ellen Skeens, Philips Healthcare Time & Place: M200 Room: San Cristobal F Comparing Operating Room Inventory Management Methods Seth Hostetler (Geisinger Health System) Abstract No. A175

Session: IAB-Industry Advisory Board Track - Monday Chair(s): Katie Coperich, FedEx ; Joan Wagner, Spirit AeroSystems Time & Place: M200 Room: San Cristobal E "Coaching/Advising Panel Discussion” (sponsored by IIE’s Industry Advisory Board jointly with IIE’s Young Professionals Group) Majid Abab (The Boeing Company), Majid Abab (Boeing), Dennis Oates (FedEx) Abstract No. A19

Session: Process Industries Track - Monday Chair(s): Joe Paris, Xonitek Time & Place: M200 Room: San Cristobal B Accelerating Performance John "Hatch" Borneman (The Corps Group) Abstract No. A212

Session: Special Panel - Monday Chair(s): Felix Negron, VP of Operations - Medtronic Time & Place: M200 Room: San Geronimo Ballroom Effective Financial Measures for Lean / Six Sigma Implementations: Getting Alignment with the Traditional Cost Accounting System Felix Negron (Medtronic), Raul Cermeño - Controller Raul Cermeño - Controller (Controller , Amgen Puerto Rico), Zilma Pacheco (Sr Director of Finance - Medtronic PR), Eric Santiago (Global Mfg Controller - Fenwal International) Abstract No. A184

www.iienet.org/annual | 117 117

Applied Solutions Sessions

Session: Sustainable Development Track - Monday Chair(s): Diana Berry, UPS Trade Management Services; Curtis Bush, Grass Valley Time & Place: M200 Room: San Cristobal C Supply Chain Sustainability: Carbon Footprint Calculation Approaches, Tools and Applications Rajiv Saxena (APL Logistics) Abstract No. A115

Session: Construction Track - Monday Chair(s): Lincoln Forbes, East Carolina University; George Gardner, Virginia Department of Transportation Time & Place: M240 Room: Auditorium The Potential and Obstacles of Integrated Project Delivery - Student Best Paper Award for Construction Division Isabelle Johnson (USC Viterbi School of Engineering) Abstract No. A166

Session: Health Systems Track - Monday Chair(s): Amanda Mewborn, Perkins+Will; Mary Ellen Skeens, Philips Healthcare Time & Place: M240 Room: San Cristobal F Improve Surgical Flow through a Hybrid Collaborative Model Balmatee Bidassie (Department of Veterans Affairs) Abstract No. A94

Session: Sustainable Development Track - Monday Chair(s): Diana Berry, UPS Trade Management Services; Curtis Bush, Grass Valley Time & Place: M240 Room: San Cristobal C Using Employees to Engage in Energy Reduction in their Workplace Brion Hurley (Rockwell Collins) Abstract No. A15

Session: Construction Track - Monday Chair(s): Lincoln Forbes, East Carolina University; George Gardner, Virginia Department of Transportation Time & Place: M330 Room: Auditorium Construction Division Town Hall Meeting Lincoln Forbes (East Carolina University), Lincoln Forbes (Florida International University), Matthew Horvat (TBA) Abstract No. A167

Session: Engineering Management Track - Monday Chair(s): Mark Jannone, Atlantic Health System; Haleh Byrne, North Carolina State University – IES Time & Place: M330 Room: San Cristobal D An Incipient Flower Cluster in Central Mexico Homero Héctor Contreras Pulido (Universidad Popular Autónoma del Estado de Puebla), Martha Alejandra Cabanas Villa (Universidad Popular Autónoma del Estado de Puebla), José Pablo Nuño de la Parra (Universidad Popular Autónoma del Estado de Puebla) Abstract No. A134

Session: Health Systems Track - Monday Chair(s): Amanda Mewborn, Perkins+Will; Mary Ellen Skeens, Philips Healthcare Time & Place: M330 Room: San Cristobal F Achieving Sustainable Improvement in Long-standing Dysfunctional Healthcare Peri-operative Processes Daniel Herrick (Dartmouth Hitchcock Medical Center) Abstract No. A142

| Welcome to the IIE Annual Conference & Expo 2013118

Applied Solutions Sessions

Session: Process Industries Track - Monday Chair(s): Joe Paris, Xonitek Time & Place: M330 Room: San Cristobal B Measuring Productivity in a Wire Factory Using Random Work Sampling Dirk Van Goubergen (Ghent University) Abstract No. A63

Session: Sustainable Development Track - Monday Chair(s): Diana Berry, UPS Trade Management Services; Curtis Bush, Grass Valley Time & Place: M330 Room: San Cristobal C Using Six Sigma to Reduce Energy with Limited Data Brion Hurley (Rockwell Collins) Abstract No. A16

Session: Work Systems Track - Monday Chair(s): George Bishop, West Monroe Partners LLC; Dongjoon Kong, Boeing Commercial Airplanes Time & Place: M330 Room: San Cristobal G Combined Productivity Management and Ergonomics Based on MTM Process Description Markus Busenbach (German MTM-Association), Markus Busenbach (German MTM-Association), Steffen Rast (German MTM-Association) Abstract No. A113

Session: Health Systems Track - Monday Chair(s): Amanda Mewborn, Perkins+Will; Mary Ellen Skeens, Philips Healthcare Time & Place: M410 Room: San Cristobal F Standardizing Patient Care to Improve Outcomes in Spinal Fusion Surgery Todd Schneider (OhioHealth) Abstract No. A141

Session: Lean Track - Monday Chair(s): Tina Agustiady, BASF Construction; Haleh Byrne, North Carolina State University – IES Time & Place: M410 Room: San Cristobal D Spreading Access to Health Care Quality Improvement Lean Tools Shruthi Musunuri (United States Department of Veteran Affairs), Harlan Pinto (Veterans Affairs Palo Alto Health Care System, Palo Alto, California), Heather Woodward-Hagg (Richard L Roudebush Veterans Affairs Medical Center, Indianapolis, IN), Sandra Serrano (Minneapolis Veterans Affairs Health Care System, Minneapolis, MN), Virgie Hickmon (Kansas City Veterans Affairs Medical Center, Kansas City, MO), Jennifer Schmidt (Clement J. Zablocki Veterans Affairs Medical Center, Milwaukee, WI), Trudy Finney (Veterans Affairs Pittsburg Health Care System, Pittsburg, PA), Marie Krugle (Veterans Affairs Pittsburg Health Care System, Pittsburg, PA) Abstract No. A171

Session: Sustainable Development Track - Monday Chair(s): Diana Berry, UPS Trade Management Services; Curtis Bush, Grass Valley Time & Place: M410 Room: San Cristobal C Creating a Lean and Green Business System – Techniques for Improving Profits and Sustainability Keivan Zokaei (SA Partners) Abstract No. A149

www.iienet.org/annual | 119 119

Applied Solutions Sessions

Session: Work Systems Track - Monday Chair(s): George Bishop, West Monroe Partners LLC; Dongjoon Kong, Boeing Commercial Airplanes Time & Place: M410 Room: San Cristobal G Measure to Fit PC Workplace by Personal Reference Points Boris Povlotsky (ergoNostic.com), Leon Kaganovskiy (Touro College, NY) Abstract No. A110

Session: IAB-Industry Advisory Board Track - Monday Chair(s): Katie Coperich, FedEx ; Joan Wagner, Spirit AeroSystems Time & Place: M500 Room: San Cristobal E Leading as an Individual Contributor Patrick Foxworthy (The MITRE Corporation) Abstract No. A214

Session: Latin American Track - Monday Chair(s): Fernando Mata, Universidad de Monterrey; Bernardo Villarreal, Universidad de Monterrey Time & Place: M500 Room: Auditorium Lean Construction Model Using Industrial Engineering Tools Diana Jaqueline Guerrero Galindo (Universidad Distrital Francisco Jose de Caldas), David Matamoros Ghisays (Universidad Distrital Francisco Jose de Caldas- Colombia) Abstract No. A83

Session: Lean Track - Monday Chair(s): Tina Agustiady, BASF Construction; Haleh Byrne, North Carolina State University – IES Time & Place: M500 Room: San Cristobal D Streamline Material Transfer Agreement Workflow Using LEAN Methodology Dennis Tan (The Methodist Hospital) Abstract No. A111

Session: Process Industries Track - Monday Chair(s): Joe Paris, Xonitek Time & Place: M500 Room: San Cristobal B A Guide to Food Waste Management: Lesson from Belgian Food Processing Industry Manoj Dora (Ghent University), Xavier Gellynck (Ghent University), Dirk Van Goubergen (VAN GOUBERGEN P&M Productivity Improvement gcv), Hans De Steur (Ghent University) Abstract No. A23

Session: Sustainable Development Track - Monday Chair(s): Diana Berry, UPS Trade Management Services; Curtis Bush, Grass Valley Time & Place: M500 Room: San Cristobal C Sustainable Development Town Hall Meeting Diana Berry (UPS), John Corliss, Diana Berry Abstract No. A73

Session: Work Systems Track - Monday Chair(s): George Bishop, West Monroe Partners LLC; Dongjoon Kong, Boeing Commercial Airplanes Time & Place: M500 Room: San Cristobal G Implementing Ergonomics Solutions through Lean workshops Shruti Gangakhedkar (The Boeing Company) Abstract No. A56

| Welcome to the IIE Annual Conference & Expo 2013120

Applied Solutions Sessions

Session: IAB-Industry Advisory Board Track - Monday Chair(s): Katie Coperich, FedEx ; Joan Wagner, Spirit AeroSystems Time & Place: M540 Room: San Cristobal E Leadership: The Essential Linchpin between Strategy and Execution Patricia Kelly Lee (Toolkit LLC) Abstract No. A219

Session: Latin American Track - Monday Chair(s): Fernando Mata, Universidad de Monterrey; Bernardo Villarreal, Universidad de Monterrey Time & Place: M540 Room: Auditorium Increasing Assembly Line Capacity Applying a Standard Work Methodology Teresa Verduzco-Garza (UDEM), Bernardo Villarreal (University of Monterrey), Isaac Rosas (Udem), Andrés Montemayor (Udem) Abstract No. A117

Session: Work Systems Track - Monday Chair(s): George Bishop, West Monroe Partners LLC; Dongjoon Kong, Boeing Commercial Airplanes Time & Place: M540 Room: San Cristobal G Cost Saving Breakthrough: Combined 6-Sigma & MOST Production Standards Setting SY Thong (A1OPEX), Serene Choo (A1OPEX) Abstract No. A97

Session: Engineering Management Track - Tuesday Chair(s): Mark Jannone, Atlantic Health System; Haleh Byrne, North Carolina State University – IES Time & Place: T800 Room: San Cristobal C Smart Maintenance Decision Support Systems (SMDSS) Dan Bumblauskas (University of Missouri and PFC Services, Inc.) Abstract No. A74

Session: Latin American Track - Tuesday Chair(s): Fernando Mata, Universidad de Monterrey; Bernardo Villarreal, Universidad de Monterrey Time & Place: T800 Room: Auditorium Optimization of Physical Distribution of Plant Using Cells Work Mónica Marcela Umbacía Carvajal (Universidad Libre - Colombia), Oscar Mayorga Torres (Universidad Libre - Colombia) Abstract No. A126

Session: Lean Track - Tuesday Chair(s): Tina Agustiady, BASF Construction; Haleh Byrne, North Carolina State University – IES Time & Place: T800 Room: San Cristobal D Design of Engineering Education as a Manufacturing System Walter Towner (Worcester Polytechnic Institute) Abstract No. A66

Session: Process Industries Track - Tuesday Chair(s): Joe Paris, Xonitek Time & Place: T800 Room: San Cristobal B What Are These Things Called Product Wheels - and Why Should I Care? Peter King (Lean Dynamics, LLC) Abstract No. A4

www.iienet.org/annual | 121 121

Applied Solutions Sessions

Session: Sustainable Development Track - Tuesday Chair(s): Diana Berry, UPS Trade Management Services; Curtis Bush, Grass Valley Time & Place: T800 Room: San Cristobal F Sustainable Transportation Packaging: What it Looks Like, and How it Benefits Your Company Arnold Barlow (UPS) Abstract No. A88

Session: Systems Engineering Track - Tuesday Chair(s): Jose Hernandez, John Deere; Jian Liu, University of Arizona Time & Place: T800 Room: San Cristobal G IE Informatics/Business Intelligence: Faster Actionable Insight through an Information Experience Mindy Holmes (Assembly Test Tech Development (ATTD) IE Solutions) Abstract No. A57

Session: Work Systems Track - Tuesday Chair(s): George Bishop, West Monroe Partners LLC; Dongjoon Kong, Boeing Commercial Airplanes Time & Place: T800 Room: San Cristobal E Work Systems and Work Measurement Town Hall Meeting George Bishop (West Monroe Partners), Richard Elliott (Boeingh) Abstract No. A205

Session: Engineering Management Track - Tuesday Chair(s): Mark Jannone, Atlantic Health System; Haleh Byrne, North Carolina State University – IES Time & Place: T840 Room: San Cristobal C Creating a Lean and Green Business System Keivan Zokaei (SA Partners) Abstract No. A192

Session: Latin American Track - Tuesday Chair(s): Fernando Mata, Universidad de Monterrey; Bernardo Villarreal, Universidad de Monterrey Time & Place: T840 Room: Auditorium Incrementar la Disponibilidad de Producto en Anaquel en una Cadena Comercial Bernardo Villarreal (Universidad de Monterrey), ( ) Abstract No. A3

Session: Systems Engineering Track - Tuesday Chair(s): Jose Hernandez, John Deere; Jian Liu, University of Arizona Time & Place: T840 Room: San Cristobal G Step Up Your Fixes – How to Optimize Your Improvement Investments Kevin McManus (Great Systems) Abstract No. A177

Session: Latin American Track - Tuesday Chair(s): Fernando Mata, Universidad de Monterrey; Bernardo Villarreal, Universidad de Monterrey Time & Place: T1100 Room: Auditorium RSE y los Encadenamientos Productivos Industriales Alrededor de una Mina Circe Niezen (Polytechnic University of Puerto Rico), Alba J. Brugueras (Universidad del Sagrado Corazón - Puerto Rico) Abstract No. A58

| Welcome to the IIE Annual Conference & Expo 2013122

Applied Solutions Sessions

Session: Supply Chain & Service Engineering Town Hall - Tuesday Chair(s): Maria Carolina Diaz, Office Depot; MD Sarder, University of Southern Mississippi Time & Place: T1100 Room: San Cristobal F Logistics & Supply Chain Division Town Hall Meeting MD Sarder (University of Southern Mississippi) Abstract No. A194

Session: Work Systems Track - Tuesday Chair(s): George Bishop, West Monroe Partners LLC; Dongjoon Kong, Boeing Commercial Airplanes Time & Place: T1100 Room: San Cristobal E Successful Applications of Work Sampling in Knowledge Work Environments Casey John O'Donnell (Jeppesen, A Boeing Company), Markus Emsermann (Jeppesen, A Boeing Company) Abstract No. A154

Session: Latin American Track - Tuesday Chair(s): Fernando Mata, Universidad de Monterrey; Bernardo Villarreal, Universidad de Monterrey Time & Place: T1140 Room: Auditorium Utilización de la herramienta para planeación estratégica: Balanced Scorecard (BSC)en el Instituto Potosino de Investigación Científica y Tecnológica, IPICYT. San Luis Potosí, México Fernando Mata (Universidad de Monterrey), Lucinda Suárez (Universidad de Monterrey) Abstract No. A159

Session: Work Systems Track - Tuesday Chair(s): George Bishop, West Monroe Partners LLC; Dongjoon Kong, Boeing Commercial Airplanes Time & Place: T1140 Room: San Cristobal E Work Measurement Approach with Multifaceted Practical Usage in Process Improvement Haleh Byrne (North Carolina State University) Abstract No. A5

Session: Engineering Management Track - Tuesday Chair(s): Mark Jannone, Atlantic Health System; Haleh Byrne, North Carolina State University – IES Time & Place: T1230 Room: San Cristobal C Applying Project Management Principles and IE techniques in Planning a Regional Conference Nina Miville (University of Miami) Abstract No. A48

Session: Lean Track - Tuesday Chair(s): Tina Agustiady, BASF Construction; Haleh Byrne, North Carolina State University – IES Time & Place: T1230 Room: San Cristobal D Success Stories of Lean Transformations in the Medical Device Industry Eduardo Ramirez (Medtronic) Abstract No. A185

Session: Process Industries Track - Tuesday Chair(s): Joe Paris, Xonitek Time & Place: T1230 Room: San Cristobal B Effective Labor Estimation in Process Industries Luis Armendariz (Process Industries Division) Abstract No. A49

www.iienet.org/annual | 123 123

Applied Solutions Sessions

Session: Systems Engineering Track - Tuesday Chair(s): Jose Hernandez, John Deere; Jian Liu, University of Arizona Time & Place: T1230 Room: San Cristobal G Stakeholders in Systems Problems Patrick Hester (Old Dominion University), Joseph Bradley (National Centers for System of Systems Engineering), Kevin Adams (National Centers for System of Systems Engineering) Abstract No. A60

Session: Engineering Management Track - Tuesday Chair(s): Mark Jannone, Atlantic Health System; Haleh Byrne, North Carolina State University – IES Time & Place: T110 Room: San Cristobal C Application of Enterprise Excellence (EE) Concept in Developing Growth Strategy Proposals in Aerospace Industry Dhirendra Kumar (North Carolina State University), David Devine (Firstmark Corporation), Liam O'Boyle (B/E Aerospace, Inc.), Kevin Foley (B/E Aerospace, Inc.) Abstract No. A77

Session: Systems Engineering Track - Tuesday Chair(s): Jose Hernandez, John Deere; Jian Liu, University of Arizona Time & Place: T110 Room: San Cristobal G Improving Requirements Engineering Through the Application of MBSE Ron Felice (IBM), Kathi Lafser (IBM) Abstract No. A6

Session: Engineering Management Track - Tuesday Chair(s): Mark Jannone, Atlantic Health System; Haleh Byrne, North Carolina State University – IES Time & Place: T200 Room: San Cristobal C What You Need to Know About Empathic Design Larrry Mallak (Western Michigan University) Abstract No. A35

Session: Latin American Track - Tuesday Chair(s): Fernando Mata, Universidad de Monterrey; Bernardo Villarreal, Universidad de Monterrey Time & Place: T200 Room: Auditorium Caso de éxito con programas de consultoría para desarrollo de microempresarios del estado de Nuevo León, México. Sinergia entre gobierno y universidad Fernando Mata (Universidad de Monterrey), Antonio Dieck Assad (UNIVERSIDAD DE MONTERREY), Lucinda Suárez (Universidad de Monterrey) Abstract No. A156

Session: Lean Track - Tuesday Chair(s): Tina Agustiady, BASF Construction; Haleh Byrne, North Carolina State University – IES Time & Place: T200 Room: San Cristobal D Optimizing Organizational Performance through a Closed Loop Hoshin Kanri System Jorge Noriega-Asturias (Edwards Lifesciences) Abstract No. A102

Session: Process Industries Track - Tuesday Chair(s): Joe Paris, Xonitek Time & Place: T200 Room: San Cristobal B Process Engineering: Key to Successful Problem Solving Melba Moore (Kairos Consulting Worldwide) Abstract No. A163

| Welcome to the IIE Annual Conference & Expo 2013124

Applied Solutions Sessions

Session: Quality, Reliability & Six Sigma Track - Tuesday Chair(s): Alaa Elwany, General Motors; Larry Graham, Time & Place: T200 Room: San Cristobal F Integrating Innovation Engineering Methods into Design for Six Sigma (DFSS). Kevin Grayson (NC State University) Abstract No. A47

Session: Special Panel - Tuesday Chair(s): Gloria Bender, Managing Principal - TRANSSOLUTIONS Time & Place: T200 Room: San Geronimo Ballroom Managing Risk and Uncertainty in Global Markets Gloria Bender (TRANSSOLUTIONS), Curt Burnett (Enterprise Manager – Industrial Engineering, Deere & Company), Bram Corbijn van Willenswaard (Operations Manager, VDL Enabling Technologies BV), John Crutchfield (Senior Manager – Industrial Engineering, The Boeing Company), David Poirier (CEO, The Poirier Group), Joan Tafoya (Director – Supply Planning Operations, Intel Corp.) Abstract No. A227

Session: Systems Engineering Track - Tuesday Chair(s): Jose Hernandez, John Deere; Jian Liu, University of Arizona Time & Place: T200 Room: San Cristobal G Industrial Engineering An Integral Element of Systems Engineering Body of Knowledg Johann Demmel (Raytheon Missile Systems) Abstract No. A50

Session: Work Systems Track - Tuesday Chair(s): George Bishop, West Monroe Partners LLC; Dongjoon Kong, Boeing Commercial Airplanes Time & Place: T200 Room: San Cristobal E Quality Improvement in Pharmacy Inventory Control Parviz Kheirkhah (MD Anderson Cancer Center) Abstract No. A87

Session: Engineering Management Track - Tuesday Chair(s): Mark Jannone, Atlantic Health System; Haleh Byrne, North Carolina State University – IES Time & Place: T240 Room: San Cristobal C Engaging the World Confederation of Productivity Science and UN Global Compact George Smith (World Confederation of Productivity Science ) Abstract No. A31

Session: Latin American Track - Tuesday Chair(s): Fernando Mata, Universidad de Monterrey; Bernardo Villarreal, Universidad de Monterrey Time & Place: T240 Room: Auditorium Perspectiva del Centro de Investigación en Química Aplicada, (CIQA) caso de éxito en vinculación e investigación aplicando herramientas de la ingeniería industrial. Fernando Mata (Universidad de Monterrey), Lucinda Suárez (Universidad de Monterrey) Abstract No. A157

Session: Lean Track - Tuesday Chair(s): Tina Agustiady, BASF Construction; Haleh Byrne, North Carolina State University – IES Time & Place: T240 Room: San Cristobal D Study of Flow in Lean Product Development Ehsan Vasheghani Farahani (Concordia University) Abstract No. A160

www.iienet.org/annual | 125 125

Applied Solutions Sessions

Session: Operations Research Track - Tuesday Chair(s): Brandy Heyde Montague, Disney Tokyo; Krishna Jha, Innovative Scheduling Time & Place: T240 Room: San Cristobal E Using the Analytic Hierarchy Process to Enhance Performance Measurement in Engineering Education Federica Robinson-Bryant (University of Central Florida) Abstract No. A182

Session: Quality, Reliability & Six Sigma Track - Tuesday Chair(s): Alaa Elwany, General Motors; Larry Graham, Time & Place: T240 Room: San Cristobal F Vital Signs – How Healthy are Your Work Systems? Kevin McManus (Great Systems) Abstract No. A178

Session: Aerospace and Defense Track - Tuesday Chair(s): Majid Abab, The Boeing Company Time & Place: T330 Room: San Cristobal G Advanced Scheduling Methods in First Unit Airplane Modification Eric May (Boeing), Tim Cook (Boeing) Abstract No. A114

Session: Engineering Management Track - Tuesday Chair(s): Mark Jannone, Atlantic Health System; Haleh Byrne, North Carolina State University – IES Time & Place: T330 Room: San Cristobal C Accelerating Business Improvement - The Power of Effective Interactions Robin Jaques (SA Partners), Gary Hourselt (SA Partners) Abstract No. A193

Session: Latin American Track - Tuesday Chair(s): Fernando Mata, Universidad de Monterrey; Bernardo Villarreal, Universidad de Monterrey Time & Place: T330 Room: Auditorium Desarrollo Sostenible para Vivir Bien Jorge Postigo (Universidad Catolica Boliviana "San Pablo") Abstract No. A140

Session: Lean Track - Tuesday Chair(s): Tina Agustiady, BASF Construction; Haleh Byrne, North Carolina State University – IES Time & Place: T330 Room: San Cristobal D Leadership Traits That Result in Successful or Mediocre to Poor Transformation – Panel Discussion Martin Nazareth (OpEx Solutions, Inc.) Abstract No. A131

Session: Operations Research Track - Tuesday Chair(s): Brandy Heyde Montague, Disney Tokyo; Krishna Jha, Innovative Scheduling Time & Place: T330 Room: San Cristobal E The Integrated Production, Inventory, and Routing Problem Considering Transportation Outsourcing Hadi Sadrsadat (University of Maryland), Ali Haghani (University of Maryland), Elham Sharifi (University of Maryland) Abstract No. A84

| Welcome to the IIE Annual Conference & Expo 2013126

Applied Solutions Sessions

Session: Quality, Reliability & Six Sigma Track - Tuesday Chair(s): Alaa Elwany, General Motors; Larry Graham, Time & Place: T330 Room: San Cristobal F Making Strategic Plan for Quality – An Example Kalikathan Krishnamoorthi (Bradley University) Abstract No. A70

Session: Supply Chain & Service Engineering Track - Tuesday Chair(s): Maria Carolina Diaz, Office Depot; MD Sarder, University of Southern Mississippi Time & Place: T330 Room: San Cristobal B Optimization Opportunities to Improve Supply Chain Efficiency: A Practitioner's Experiences Rajiv Saxena (APL Logistics) Abstract No. A80

Session: Aerospace and Defense Track - Tuesday Chair(s): Majid Abab, The Boeing Company Time & Place: T410 Room: San Cristobal G Sequential Measure of Standard Work Compliance Coupled with Real-Time Performance Metrics William Ellis (The Boeing Company) Abstract No. A85

Session: Engineering Management Track - Tuesday Chair(s): Mark Jannone, Atlantic Health System; Haleh Byrne, North Carolina State University – IES Time & Place: T410 Room: San Cristobal C The Successful Road Map for Engineering and Management Systems Students: For Students, By Students and Experts Arsalan Safari (University of Waterloo), Wiljeana Jackson Glover (MIT) Abstract No. A109

Session: Latin American Track - Tuesday Chair(s): Fernando Mata, Universidad de Monterrey; Bernardo Villarreal, Universidad de Monterrey Time & Place: T410 Room: Auditorium Caso de estudio – optimización en proceso de procuración de justicia Roberto Rosas (ITESM Campus Leon), Francisco Marmolejo (ITESM Campus León), Beatriz Huerta (ITESM Campus Leon), Julieta Garcia (ITESM Campus Leon) Abstract No. A204

Session: Quality, Reliability & Six Sigma Track - Tuesday Chair(s): Alaa Elwany, General Motors; Larry Graham, Time & Place: T410 Room: San Cristobal F Visual Measurement System Analysis with EMP Scott Wise (SAS Institute) Abstract No. A13

Session: Aerospace and Defense Track - Tuesday Chair(s): Majid Abab, The Boeing Company Time & Place: T500 Room: San Cristobal G Applying Theory of Constraints to Large Network Problems Paul Marshall (The Boeing Company), George Peck (The Boeing Company), Dan Ciez (The Boeing Company) Abstract No. A65

www.iienet.org/annual | 127 127

Applied Solutions Sessions

Session: Engineering Management Track - Tuesday Chair(s): Mark Jannone, Atlantic Health System; Haleh Byrne, North Carolina State University – IES Time & Place: T500 Room: San Cristobal C Developing a Material Flow Organization - The Why and How Helmut Welke (Deere and Company) Abstract No. A81

Session: IAB - Industry Advisory Board Track - Tuesday Chair(s): Katie Coperich, FedEx ; Joan Wagner, Spirit AeroSystems Time & Place: T500 Room: San Cristobal B Industry Advisory Board (IAB) Townhall Dennis Oates (FedEx SmartPost) Abstract No. A51

Session: Latin American Track - Tuesday Chair(s): Fernando Mata, Universidad de Monterrey; Bernardo Villarreal, Universidad de Monterrey Time & Place: T500 Room: Auditorium Logistics Management in the Hanseatica Company Using System Dynamics Oscar Mayorga Torres (Universidad Libre - Colombia), Deivi Estid Cubides Daza (Universidad Libre - Colombia), Mirta Yadira Gualteros Tellez (Universidad Libre - Colombia) Abstract No. A215

Session: Lean Track - Tuesday Chair(s): Tina Agustiady, BASF Construction; Haleh Byrne, North Carolina State University – IES Time & Place: T500 Room: San Cristobal D Lean Product Development Process Yields Huge Gains for Effective Leaders Ken McClymonds (OpEx Solutions) Abstract No. A42

Session: Operations Research Track - Tuesday Chair(s): Brandy Heyde Montague, Disney Tokyo; Krishna Jha, Innovative Scheduling Time & Place: T500 Room: San Cristobal E Effects of RFID on Profitability in Retail Supply Chains Burak Eksioglu (Mississippi State University) Abstract No. A218

Session: Quality, Reliability & Six Sigma Track - Tuesday Chair(s): Alaa Elwany, General Motors; Larry Graham, Time & Place: T500 Room: San Cristobal F Use of Lean Sigma Methodology for Quality System Improvements - A Panel Discussion Roberto Murillo (Medtronic) Abstract No. A191

Session: Aerospace and Defense Track - Tuesday Chair(s): Majid Abab, The Boeing Company Time & Place: T540 Room: San Cristobal G Standard Work in a Variable Production Environment Kris Pittrof (Boeing), Justin Polacek (Boeing), Jeanine Mineart (Boeing) Abstract No. A151

| Welcome to the IIE Annual Conference & Expo 2013128

Applied Solutions Sessions

Session: Engineering Management Track - Tuesday Chair(s): Mark Jannone, Atlantic Health System; Haleh Byrne, North Carolina State University – IES Time & Place: T540 Room: San Cristobal C Utilizing Peer Networking for Performance Improvement Yvette Leger (Premier healthcare alliance) Abstract No. A174

Session: Latin American Track - Tuesday Chair(s): Fernando Mata, Universidad de Monterrey; Bernardo Villarreal, Universidad de Monterrey Time & Place: T540 Room: Auditorium Simulación aplicada a servicios municipales: caso del ayuntamiento de Puebla. Homero Héctor Contreras Pulido (Universidad Popular Autónoma del Estado de Puebla), Jose Pablo Nuño de la Parra (Universidad Popular Autónoma del Estado de Puebla), Walther Junghanns Albers (Ayuntamiento de Puebla), Ana Georgina Vargas Catalán (Ayuntamiento de Puebla) Abstract No. A34

Session: Operations Research Track - Tuesday Chair(s): Brandy Heyde Montague, Disney Tokyo; Krishna Jha, Innovative Scheduling Time & Place: T540 Room: San Cristobal E Capacity Management Using Static Modeling, Queuing Theory, and Performance Curves Roland Schelasin (Texas Instruments) Abstract No. A53

Session: Quality, Reliability & Six Sigma Track - Tuesday Chair(s): Alaa Elwany, General Motors; Larry Graham, Time & Place: T540 Room: San Cristobal F Reducing Raw Material Waste in a Food Company by Using Six Sigma Ernesto Sampayo (Bimbo de Colombia S.A.), Raha Akhavan (Universidad de los Andes) Abstract No. A147

Session: Aerospace and Defense Track - Wednesday Chair(s): Majid Abab, The Boeing Company Time & Place: W800 Room: San Cristobal G Development of an On-line Advanced Ergonomics Training Course for Designers and Engineers Mark Stuart (Boeing), Brian Poggioli (Boeing Research & Technology) Abstract No. A22

Session: Engineering Management Track - Wednesday Chair(s): Mark Jannone, Atlantic Health System; Haleh Byrne, North Carolina State University – IES Time & Place: W800 Room: San Cristobal C Evaluation of Alternative Robotics and Potential Applications Martin Stein (Martin Stein Associates), Eduardo Torres-Jara (Robot Rebuilt) Abstract No. A108

Session: Health Systems Track - Wednesday Chair(s): Amanda Mewborn, Perkins+Will; Mary Ellen Skeens, Philips Healthcare Time & Place: W800 Room: San Cristobal E Increasing capacity in the OR for thyroidectomy patients Nadia Lahrichi (École Polytechnique Montréal), Lawrence Rosenberg (Sir Mortimer B Davis Jewish General Hospital), Philip Troy (Les entreprises Troyware) Abstract No. A172

www.iienet.org/annual | 129 129

Applied Solutions Sessions

Session: Latin American Track - Wednesday Chair(s): Fernando Mata, Universidad de Monterrey; Bernardo Villarreal, Universidad de Monterrey Time & Place: W800 Room: Auditorium Mejoras de los Procesos Productivos en una Linea de Fabricacion de Productos Solidos de una Empresa Farmaceutica Karen Contreras (Universidad Católica Andrés Bello ), Eglys Irazabal (UCAB), Alirio Villanueva (UCAB) Abstract No. A39

Session: Supply Chain & Service Engineering Track - Wednesday Chair(s): Maria Carolina Diaz, Office Depot; MD Sarder, University of Southern Mississippi Time & Place: W800 Room: San Cristobal B Supply Chain Fitness: Integration of Operations, Manufacturing and Supply Chain Martin Stein (Martin Stein Associates) Abstract No. A28

Session: Aerospace and Defense Track - Wednesday Chair(s): Majid Abab, The Boeing Company Time & Place: W840 Room: San Cristobal G Value Streams – The Importance of Understanding Them Brian McCarthy (Boeing) Abstract No. A201

Session: Health Systems Track - Wednesday Chair(s): Amanda Mewborn, Perkins+Will; Mary Ellen Skeens, Philips Healthcare Time & Place: W840 Room: San Cristobal E Layout Analysis to Select Transportation Equipment Storage Locations at a Cancer Hospital Tatiana Hmar-Lagroun (The University of Texas MD Anderson Cancer Center), Pamela Douglas-Ntagha (MD Anderson Cancer Center) Abstract No. A86

Session: Latin American Track - Wednesday Chair(s): Fernando Mata, Universidad de Monterrey; Bernardo Villarreal, Universidad de Monterrey Time & Place: W840 Room: Auditorium Process Modeling in the Housing Allowance Using Discrete Simulation Diana Carolina Martínez Hernández (Universidad Libre - Colombia), Oscar Mayorga Torres (Universidad Libre - Colombia) Abstract No. A135

Session: Quality, Reliability & Six Sigma Track - Wednesday Chair(s): Alaa Elwany, General Motors; Larry Graham , Time & Place: W840 Room: San Cristobal F A Strategy for Managing Risks - A Project Management Tool Alvin Sumter (ThyssenKrupp Elevators) Abstract No. A181

Session: Supply Chain & Service Engineering Track - Wednesday Chair(s): Maria Carolina Diaz, Office Depot; MD Sarder, University of Southern Mississippi Time & Place: W840 Room: San Cristobal B Modeling Complex Labor Calculations with a Limited Variable System – A Linear Optimization Case Study Jeremy Tancredi (West Monroe Partners) Abstract No. A203

| Welcome to the IIE Annual Conference & Expo 2013130

Applied Solutions Sessions

Session: Aerospace and Defense Track - Wednesday Chair(s): Majid Abab, The Boeing Company Time & Place: W925 Room: San Cristobal G Towards the Development of a Tool Evaluation Survey and Replacement Strategy Katherine Meza (The Boeing. Company), Liisa Bruchal (The Boeing Company) Abstract No. A173

Session: Health Systems Track - Wednesday Chair(s): Amanda Mewborn, Perkins+Will; Mary Ellen Skeens, Philips Healthcare Time & Place: W925 Room: San Cristobal E A Usability Analysis of Critical Care, Med-surg and Birthing Hospital Beds J.P. Purswell (Colorado State University-Pueblo), ( ) Abstract No. A92

Session: Latin American Track - Wednesday Chair(s): Fernando Mata, Universidad de Monterrey; Bernardo Villarreal, Universidad de Monterrey Time & Place: W925 Room: Auditorium Scheduling Platform Vehicles Fruver in Stores Exito in Receipt Sites Andrea Catalina Rojas Niviayo (Universidad Libre - Colombia), Jineth Hasbleidy Lozano Yepes (Universidad Libre - Colombia), Oscar Mayorga Torres (Universidad Libre - Colombia) Abstract No. A129

Session: Quality, Reliability & Six Sigma Track - Wednesday Chair(s): Alaa Elwany, General Motors; Larry Graham , Time & Place: W925 Room: San Cristobal F A New Paradigm in the Implementation of a Lean Six Sigma Program Tony Pesante (X6Sigma), Felix Negron (Vice-President of Operations, Medtronic), Chris Bush (Amgen Process Excellence Executive Director ) Abstract No. A183

Session: Supply Chain & Service Engineering Track - Wednesday Chair(s): Maria Carolina Diaz, Office Depot; MD Sarder, University of Southern Mississippi Time & Place: W925 Room: San Cristobal B The Next Generation Rail Supply Chain Initiative – What Is It? Marie Griffin (Industrial Extension Service at North Carolina State University), José Colón (Puerto Rico Manufacturing Extension Inc. (PRiMEX)) Abstract No. A170

Session: Aerospace and Defense Track - Wednesday Chair(s): Majid Abab, The Boeing Company Time & Place: W1005 Room: San Cristobal G Utilizing Industrial Engineering Skills within Lean for the Right Overtime Reduction Implementation Jessica Harris (Boeing Corporation), William Churley (The Boeing Company) Abstract No. A145

Session: Engineering Management Track - Wednesday Chair(s): Mark Jannone, Atlantic Health System; Haleh Byrne, North Carolina State University – IES Time & Place: W1005 Room: San Cristobal C Next Generation Rail Supply Chain Process Development: A Challenging Honor Marie Griffin (Industrial Extension Service at North Carolina State University), José Colón (Puerto Rico Manufacturing Extension Inc. (PRiMEX)) Abstract No. A169

www.iienet.org/annual | 131 131

Applied Solutions Sessions

Session: Health Systems Track - Wednesday Chair(s): Amanda Mewborn, Perkins+Will; Mary Ellen Skeens, Philips Healthcare Time & Place: W1005 Room: San Cristobal E Identification of Congestive Heart Failure Patients through Lean Tools Tatiana Hamar-Lagroun (UT MD Anderson Cancer Center) Abstract No. A152

Session: Latin American Track - Wednesday Chair(s): Fernando Mata, Universidad de Monterrey; Bernardo Villarreal, Universidad de Monterrey Time & Place: W1005 Room: Auditorium Evaluation of Production Orders Split in Electrostatic Painting Company Diana Carolina Forero Riveros (Universidad Libre - Colombia), Oscar Mayorga Torres (Universidad Libre - Colombia) Abstract No. A125

Session: Supply Chain & Service Engineering Track - Wednesday Chair(s): Maria Carolina Diaz, Office Depot; MD Sarder, University of Southern Mississippi Time & Place: W1005 Room: San Cristobal B Reducing Supply Chain Costs By Maximizing Truck Space Utilization Maria Carolina Diaz (Office Depot) Abstract No. A179

Session: Aerospace and Defense Track - Wednesday Chair(s): Majid Abab, The Boeing Company Time & Place: W1050 Room: San Cristobal G Boeing 777 Functional Testing Process Improvements to support 2.5 rate Increase Zeyad Al Aqrabawi (the Boeing Company), Luis Mendez (The Boeing Company) Abstract No. A197

Session: Engineering Management Track - Wednesday Chair(s): Mark Jannone, Atlantic Health System; Haleh Byrne, North Carolina State University – IES Time & Place: W1050 Room: San Cristobal C U.S. In-flight Icing Accidents and Incidents, 2006 to 2010 Philip Appiah Kubi (Ohio University), Isaac Atuahene (University of Tennessee), Borja Martos (University of Tennessee), Rapinder Sawhney (University of Tennessee), Samuel William (University of Tennessee) Abstract No. A32

Session: Health Systems Track - Wednesday Chair(s): Amanda Mewborn, Perkins+Will; Mary Ellen Skeens, Philips Healthcare Time & Place: W1050 Room: San Cristobal E Optimizing Cancer Care through Collaborative Approach Shaiju Eapen (Department of Veterans Affairs), Balmatee Bidassie (Department of Veterans Affairs) Abstract No. A93

Session: Latin American Track - Wednesday Chair(s): Fernando Mata, Universidad de Monterrey; Bernardo Villarreal, Universidad de Monterrey Time & Place: W1050 Room: Auditorium Reducción del Nivel de Inventario en las Familias de Conjuntos y Flechas Semi-Eje Bernardo Villarreal-Elizondo (Universidad de Monterrey), Leopoldo Delgado-Garza (Universidad de Monterrey), Bernardo Villarreal (Universidad de Monterrey), Nohemi Moya-Lopez (Universidad de Monterrey), Diana Valenzuela (Universidad de Monterrey) Abstract No. A220

| Welcome to the IIE Annual Conference & Expo 2013132

Applied Solutions Sessions

Session: Lean Track - Wednesday Chair(s): Tina Agustiady, BASF Construction; Haleh Byrne, North Carolina State University – IES Time & Place: W1050 Room: San Cristobal D Applications of the Lean Methodology at The University of Texas MD Anderson Cancer Center Tatiana Hmar-Lagroun (The University of Texas MD Anderson Cancer Center), Adriana L. Chavez (MD Anderson Cancer Center) Abstract No. A89

Session: Quality, Reliability & Six Sigma Track - Wednesday Chair(s): Alaa Elwany, General Motors; Larry Graham , Time & Place: W1050 Room: San Cristobal F Revenue Capture using Six Sigma Methodology Dennis Tan (The Methodist Hospital) Abstract No. A119

Session: Supply Chain & Service Engineering Track - Wednesday Chair(s): Maria Carolina Diaz, Office Depot; MD Sarder, University of Southern Mississippi Time & Place: W1050 Room: San Cristobal B Challenges and Benefits in Simulating Retail; A Non-Standardized Systems Approach Katherine Fisher (West Monroe Partners), Joel Brock (West Monroe Partners), Joseph Steen (West Monroe Partners) Abstract No. A61

Session: Engineering Management Track - Wednesday Chair(s): Mark Jannone, Atlantic Health System; Haleh Byrne, North Carolina State University – IES Time & Place: W1130 Room: San Cristobal C Deployment of a Successful Closed Loop Productivity Improvement System Jorge Noriega-Asturias (Edwards Lifesciences) Abstract No. A104

Session: Health Systems Track - Wednesday Chair(s): Amanda Mewborn, Perkins+Will; Mary Ellen Skeens, Philips Healthcare Time & Place: W1130 Room: San Cristobal E Creating Additional Capacity By Applying Queueing Theory To Transportation Services Ranganath Iyer (MD Anderson Cancer Center), Danna Stone (MD Anderson Cancer Center), Pamela Douglas-Ntagha (MD Anderson Cancer Center), Joseph Steele (MD Anderson Cancer Center) Abstract No. A14

Session: Latin American Track - Wednesday Chair(s): Fernando Mata, Universidad de Monterrey; Bernardo Villarreal, Universidad de Monterrey Time & Place: W1130 Room: Auditorium An Application of Routing Models for PET Pickup for Recycling Maria Acosta (Instituto Tecnológico de Sonora), Elias Olivares (UPAEP), Sandra Peñuñuri (ITSON), Arnulfo Naranjo (ITSON), Javier Portugal (ITSON), Carlos Navarro (ITSON) Abstract No. A76

Session: Quality, Reliability & Six Sigma Track - Wednesday Chair(s): Alaa Elwany, General Motors; Larry Graham , Time & Place: W1130 Room: San Cristobal F Reducing CT Rescans using Six-Sigma Methodology Dennis Tan (The Methodist Hospital) Abstract No. A120

www.iienet.org/annual | 133 133

Applied Solutions Sessions

| Welcome to the IIE Annual Conference & Expo 2013134

Applied Solutions Sessions

Abab, Majid ................................................. 117 Abbott, Jim .................................................. 62 Abdel-Malek, Layek .................................... 101, 112 Abdollahnejad Barough, Hossein ................ 66, 84, 87 Abdulhameed, Osama .................................. 106 Abhyankar, Kushal ...................................... 7 Abouel Nasr, Emad ...................................... 13, 105, 106, 112 Abril, Danilo ................................................ 31, 32 Abualsauod, Emad ....................................... 83, 107 ACERO CHAVEZ, JOSE L ........................ 105 Acevedo, Miguel ......................................... 90 Achia, William ............................................. 108 Acosta, Maria .............................................. 133 Acosta Cervantes, Mary Carmen ................. 5 Acosta-Amado, Rolando .............................. 28, 36, 82 Acosta-Sojo, Yadrianna ............................... 108 Adams, Kevin .............................................. 60, 124 Adeinat, Hamza ........................................... 81, 97 Adelman, Dan .............................................. 75 Adongo, Achieng ......................................... 69 Afify, Ashraf ................................................ 4 Agarwal, Siddhartha .................................... 32 Aghazadeh, Fereydoun ................................ 77 Agrawal, Deepak ......................................... 55 Aguilar, Karina ............................................ 31 Aguilar, Luis ................................................ 93 Aguilar Fernandez, Mario ............................ 85, 91 Aguilar Noguera, Ludivia ............................ 9 Aguilar-Villarreal, Arlethe Yari ................... 2 Aguirre, Oswaldo ......................................... 43 Aguwa, Celestine ......................................... 35 Ahiska, Semra Sebnem ................................ 50 Ahmed, Abdulaziz ....................................... 93 Ahmed, Anas ............................................... 105 Ahner, Darryl ............................................... 29, 59 Ahram, Tareq ............................................... 34, 38, 71, 107 Ajayi, Richard .............................................. 22 Ajorlou, Saeede ........................................... 51, 109 Akagi, Hiromasa .......................................... 57 Akhavan, Raha ............................................. 129 Akhavan-Tabatabaei, Raha .......................... 103 Akin, Gokce ................................................. 75 Aksu, Enver ................................................. 57 Akyeampong, Joseph ................................... 39, 100 Al Aqrabawi, Zeyad ..................................... 132 Al Theeb, Nader .......................................... 24 Al-Ahmari, Abdulrahman ............................ 106, 112 Al-Haddad, Serina ....................................... 64 Al-Hawari, Tarek ......................................... 93 Al-Shareef, Khalid ....................................... 43 Al-Turki, Umar ............................................ 43 Al-Zu'bi, Walid ............................................ 28 Alabazas, Cheyenne ..................................... 41 Alaeddini, Adel ............................................ 109 Alamoud, Muhammad ................................. 18 Alamri, Amr ................................................ 83, 99 Alazzam, Azmi ............................................ 45, 48 Albey, Erinc ................................................. 3 Alcorta García, María .................................. 94 Aldarondo, Francisco ................................... 3 Aldubaisi, Ali .............................................. 15, 39 Aleman, Dionne ........................................... 69, 72 Alexander, Suraj .......................................... 73 Ali, Ahad ..................................................... 76 Ali, Islam ..................................................... 12 Ali, Rehab .................................................... 8 Alkhafaji, Soroor ......................................... 39

Allen, Robert ................................................ 15, 87 Allen, Theodore ............................................ 83 Almaian, Rufaidah ....................................... 82 Almaktoom, Abdulaziz ................................ 77 Alonso, Sergio .............................................. 93, 110 Alston, D'Javon ............................................ 103 Altabbakh, Hanan ......................................... 74 Alvarado, Jorlys ........................................... 19 Alvarez, Humberto ....................................... 97, 104 Alvarez, Wilson ............................................ 49 Alves Portela Santos, Eduardo ..................... 49, 57, 98 Alwahishie, Abdelwahab .............................. 11 Amaba, Ben 1 ................................................ 07 Ametlli, Vanda ............................................. 114 Amundson, Joseph ....................................... 61 An, Qian ....................................................... 81 Ancker, Jessica ............................................. 80 Anderson, Donald ......................................... 18 Anderson, Joseph ......................................... 85 Anderson, Kelsey ......................................... 67 ANGEL, MARIA CLAUDIA ...................... 92 Angelidis, Evangelos .................................... 74 Anjomani, Ardeshir ...................................... 66 Ansaripour, Afrooz ....................................... 49 Antani, Kavit ................................................ 64 Antmann, Eric .............................................. 55 Antonison, Mark ........................................... 35 Appiah Kubi, Philip ...................................... 54, 82, 102, 132 Aqlan, Faisal ................................................ 79 Arab, Ali ....................................................... 69 ArabKhazaeli, Soha ...................................... 112 Arasanipalai Raghavan, Venkatesh .............. 54, 79 Araz, Ozgur .................................................. 68 Arce, Neslin .................................................. 99 Arinez, Jorge ................................................ 98 Arinsoy, Aslican ........................................... 3, 110 Arlitt, Ryan ................................................... 68 Armendariz, Luis .......................................... 123 Arriaga, Javier .............................................. 8 Asfour, Shihab .............................................. 89 Ashour, Omar ............................................... 42, 58 Ashoury, Armin ............................................ 38 Asio, Sarah ................................................... 94 Askin, Ronald ............................................... 8, 68 Astion, Mike ................................................. 29 Atala, Anthony ............................................. 55, 76 Ates, Ozan .................................................... 3 Athawale, Samita ......................................... 7, 14 Atilola, Emma .............................................. 100 Atristain Suarez, Gabriel .............................. 91 Attah, Al ....................................................... 155 Atuahene, Isaac ............................................ 36, 54, 58, 60, 82, ...................................................................... 102, 105, 132 Auyeung, Peter ............................................. 99 Avci, Mesut .................................................. 89 Awudu, Iddrisu ............................................. 23, 36, 42 Aydeniz, Mehmet ......................................... 7 Azadian, Farshid ........................................... 43 Azamian, Tara .............................................. 20 Azizi, Nader ................................................. 100 Babiceanu, Radu ........................................... 53 Babu, Harish ................................................. 33 Bacioiu, George ............................................ 10 Badar, M. Affan ........................................... 78, 82, 102 Badiru, Adedeji ............................................ 109 Badurdeen, Fazleena .................................... 15, 30, 51, 61 Baez-Fernandez, Hector ............................... 39

Author Index

Bafna, Kailash ............................................. 28, 84 Bahaitham, Haitham .................................... 2 Bai, Guangxing ............................................ 45 BAI, LIHUA ................................................ 105 Bai, Lihui ..................................................... 15, 82, 88, 101, 109 Baker, Nathan .............................................. 82, 102 Bakhsh, Ahmed ........................................... 79 Balandrano, Francisco ................................. 69 Balasundaram, Baski ................................... 48 Bandha, Sonia .............................................. 82 Bandyopadhyay, Rubenka ........................... 100 Banjevic, Dragan ......................................... 4, 18, 103 Banks, Patricia ............................................. 60, 100 Barker, Kash ................................................ 16, 39, 53, 82 Barlow, Arnold ............................................ 122 Barnes, Sean ................................................ 69 Baroud, Hiba ................................................ 16, 53 BARRERA PARRA, LEONARD EDUARDO ... 88 Barritt, Sidney .............................................. 102 Barry, James ................................................ 6 Bartolomei-Suárez, Sonia ............................ 94 Barut, Mehmet ............................................. 14 BASAR, GULSEVI ..................................... 70 Baseman, Robert .......................................... 19 Basinger, Katie ............................................ 30 Batieha, Farhan ............................................ 112 Batson, Robert ............................................. 115 Batta, Rajan ................................................. 32, 38, 48, 66 Batur, Demet ................................................ 112 Bauer, Denise .............................................. 88 Bauters, Karel .............................................. 71 Baylis, Alexander ........................................ 93 Bayraksan, Guzin ......................................... 45, 110 Bazargan, Massoud ...................................... 45, 88 Becerra Rodríguez, María Blanca ................ 110 Beck, Terry .................................................. 107 Becvarik, Rachel .......................................... 11 Bedoya-Valencia, Leonardo ........................ 70, 99 Begazo, Maria Alejandra ............................. 93 Belles, Randy ............................................... 7 Bemley, Jessye ............................................. 17, 103 Ben-Arieh, David ......................................... 73 Bender, Gloria ............................................. 125 Benedict, Ashley .......................................... 9 Bengoa, David ............................................. 108 BenJebara, Marouen .................................... 17 Bennani, Reda .............................................. 104 Benneyan, James ......................................... 12 Berg, Tom .................................................... 23, 35, 56 Bergfors, Gordon ......................................... 68 Bergman, Dan .............................................. 53 Beristain, Gerson ......................................... 58 Berling, Peter ............................................... 1 Berry, Diana ................................................ 116, 120 Bethea, Jacqueline ....................................... 100 Bhat, Sanket ................................................. 86 Bhattacharjee, Manish C. ............................. 82 Bhide, Sayli ................................................. 45, 99 Bian, Linkan ................................................ 44 Bidanda, Bopaya .......................................... 51 Bidassie, Balmatee ....................................... 9, 118, 132 Bier, Vicki M. .............................................. 17, 53 Bilec, Melissa .............................................. 21 Bisantz, Ann ................................................ 51, 80, 99 Bischoff, Carol ............................................. 71 Bish, Douglas .............................................. 16 Bishop, George ............................................ 49, 122

Bissinger, Nancy .......................................... 46 Bjarnason, Erik ............................................. 18 Bodner, Doug ............................................... 30 Bohn, Daniel ................................................ 74 Boles, Carrie Ann ......................................... 103 Bonet Olivencia, Samuel A. ......................... 50 Bora, Selim ................................................... 93 Bordini, Giovani Antonio ............................. 98 Borneman, John "Hatch" .............................. 117 Bosman, Lisa ................................................ 39 Botterud, Audun ........................................... 20, 24, 33 Bova, Matthew ............................................. 29 Boylan, Gregory ........................................... 29 Boysen, Nils ................................................. 57 Bozorgi, Ali .................................................. 23, 26 Bozorgirad, Mir Abbas ................................. 60 Bradley, Joseph ............................................ 60, 104, 124 Brandeau, Margaret ...................................... 61 Breuer, Dominic ........................................... 2 Briggs, Andrea ............................................. 112 Bright, Juliana .............................................. 87 Brill, E. Downy ............................................ 27 Brock, Joel ................................................... 133 Brock, Luther ............................................... 104 Brouwer, Jack ............................................... 80 Brown, Adam ............................................... 61 Brown, Gregory ............................................ 115 Brown, Mathew ............................................ 84 Brown, Shawn .............................................. 65, 95 Bruchal, Liisa ............................................... 131 Brugueras, Alba J. ........................................ 122 Buch, Kuang-Hao ......................................... 44 Buch, Nils ..................................................... 50 Buenviaje, Bernardo ..................................... 85 Bukkapatnam, Satish .................................... 82 Bukovcic, Petar ............................................ 97 Bumblauskas, Dan ........................................ 121 Burk, Roger .................................................. 53 Burke, Laura ................................................. 46 Burnett, Curt ................................................. 125 Burnett, Gabriel ............................................ 5 Burnham, Iris ................................................ 112 Burns, Emily ................................................ 16 Burns, James ................................................ 14 Bursic, Karen ................................................ 63 Busby, Jeremy .............................................. 95 Busenbach, Markus ...................................... 119 Bush, Chris ................................................... 131 Butt, Steven .................................................. 14 Buyuktahtakin, Esra ..................................... 80 Buyurgan, Nebil ........................................... 95, 103 Byrne, Haleh ................................................ 123 C. Henry, Andrea ......................................... 95 Cabanas Villa, Martha Alejandra ................. 91, 118 Cabrera, Victoria .......................................... 78 Cabrera-Ríos, Mauricio ................................ 5, 16, 19, 76, 79, 84, 99 Caceres, Rebeca ........................................... 99 Caffarel, Graciela ......................................... 3, 94, 113 Cai, Wenbo ................................................... 112 Cai, Yi .......................................................... 106 Çak?r, Volkan .............................................. 72 Caldwell, Barrett .......................................... 47, 68, 78, 94 Calheiros, Rafael .......................................... 73 Calix, Ricardo .............................................. 106 Calvo-Amodio, Javier .................................. 14, 40 Camelio, Jaime ............................................. 87, 101, 104 Canto, Ana ................................................... 21

Author Index

Cao, Wen ..................................................... 18, 67, 112 Cao, Wenhua ............................................... 65 Capan, Muge ................................................ 75 Cardenas Orlandini, Pablo Felipe ................ 40 Carew, Stephanie ......................................... 16 Carl, Sebastian ............................................. 74 Carlo, Hector ............................................... 3, 33, 49 Carlton, Annmarie ....................................... 51 Carr, Sean .................................................... 2, 12 Carrano, Andres ........................................... 96 carrillo, victor .............................................. 80 Cassady, Richard ......................................... 105 Castaing, Jeremy .......................................... 49, 82 Castaneda, Jason .......................................... 74 Castellanos Galan, Juliana Marcela ............. 97 Castillo, Krystel ........................................... 102 Castro, Joan ................................................. 53, 58 Castro, Jose .................................................. 5, 19 Castro Arroyo, Jose Manuel ........................ 113 Casucci, Sabrina .......................................... 99 Catalano, Marie ........................................... 96 Catic, Amer .................................................. 71 Cator, Allison .............................................. 16 Catroli, Bruno .............................................. 53 Cauchick Miguel, Paulo A. .......................... 84 Caudrelier, Laurent N. ................................. 103 Cavazos, Myrna Leticia ............................... 92 Cavdaroglu, Burak ....................................... 3 Cavuoto, Lora .............................................. 63 Celik, Nurcin ............................................... 5, 36, 46, 51, 55 Celikbilek, Can ............................................ 86, 87, 95 Cellis Amortegui, Luz Marcela .................... 103 Centeno, Grisselle ........................................ 103 Cesani, Viviana ............................................ 36, 71, 108 Cetiner, Sacit ............................................... 7 Ceyhan, Mehmet Erkan ............................... 12 Chacón-Mondragón, Óscar L. ..................... 5 Chacosky, Austin ......................................... 58 Chalil Madathil, Kapil ................................. 34, 50, 82, 86 Chan, Victor Wai Kin .................................. 32, 104 Chandramouli, Vijayendran ......................... 33 Chang, Chia-Jung ........................................ 47 Chang, Chien-Chi ........................................ 14 Chang, Xiaomeng ........................................ 68 Chapel, Tiara ............................................... 39 Chapman, Marsha ........................................ 63 Chase, Bradley ............................................. 40 Chatwattanasiri, Nida .................................. 69 Chauhan, Satyaveer ..................................... 100, 110 Chavez, Adriana L. ...................................... 133 Chee, Carlos ................................................ 94 Chelst, Kenneth ........................................... 112 Chen, Binchao ............................................. 84 Chen, Bokan ................................................ 26 Chen, F.F. .................................................... 64 Chen, Guorong ............................................. 98 Chen, Howard .............................................. 32 Chen, Huaping ............................................. 23, 28, 37 Chen, KuoWei ............................................. 104 Chen, Nan .................................................... 33, 44 Chen, Sheng-I .............................................. 95 Chen, Shi-Jie (Gary) .................................... 1 Chen, Thomas .............................................. 86 Chen, Victoria .............................................. 35, 53, 66, 89 Chen, Xin ..................................................... 27, 54, 105 Cheng, Changqing ....................................... 82 Cheng, Yao .................................................. 13

Chera, Bhisham ............................................ 9, 34 Chernow, Eric .............................................. 106 Chi, Lei ......................................................... 104 Chicken, Eric ................................................ 11, 32, 33 Childers, Ashley K. ...................................... 67 Childs, John .................................................. 29 Chimmalgi, Rajshekhar ................................ 98 Chinnam, Ratna ............................................ 43 Chiou, Richard ............................................. 107 Cho, Byung Rae ........................................... 29 Chonde, Seifu ............................................... 42 Choo, Serene ................................................ 121 Chou, Chun-An ............................................ 37 Chow, Timothy ............................................ 78 Christ, Sharon L. .......................................... 12 Chuang, Horng-Fu ........................................ 19 Chun, Woo-Suk ............................................ 109 Churley, William .......................................... 131 Ciarallo, Frank .............................................. 26, 29 Ciez, Dan ...................................................... 127 Cintron, Aixa ................................................ 31 Cintron, Jose ................................................. 53 Clarke, Tyan ................................................. 7 Claros Ortuño, Paola .................................... 3 Claudia, Valles ............................................. 112 Claudio, David ............................................. 16, 41, 54, 71, 73 Claypool, Erin .............................................. 65, 95 Cleves, Laura ................................................ 30 Cloutier, Patrick ........................................... 116 Coblio, Nicholas ........................................... 9, 86 Cobuloglu, Halil Ibrahim ............................. 80 Cochran, Charles .......................................... 115 Cohen, Paul .................................................. 12, 25, 76 Cohn, Amy ................................................... 16, 49, 82 Coit, David ................................................... 6, 51, 69, 79 Coles, John ................................................... 11, 22, 96 Collet, Maricarmen ....................................... 38, 71 Colombi, John .............................................. 59 Colón, José ................................................... 131 Colon, Marisol .............................................. 71 Componation, Paul ....................................... 89, 101 Contreras, Karen ........................................... 130 Contreras Pulido, Homero Héctor ................ 91, 118, 129 Cook, Tim .................................................... 126 Cope, Dayana ............................................... 112 Copley-Woods, Noe ..................................... 21 Corbijn van Willenswaard, Bram ................. 125 Cordeau, Jean-François ................................ 98 Cordero-Franco, Alvaro ............................... 11,87 Córdova Lara, Gabriela de Jesús .................. 66 Corliss, John ................................................. 116 Corliss, John ................................................. 120 Cormier, Denis ............................................. 68 Corns, Steven ............................................... 3 Corporan, Karl .............................................. 95 Corrales, Martha ........................................... 21 Cortes, Beatriz_Murrieta .............................. 10 Cosgriff, Virginia ......................................... 41, 73 Cosme Negron, Erica ................................... 58 Costa, Helder ................................................ 1, 52, 53, 97 Cozzarin, Brian ............................................ 22 Crane, Peter .................................................. 80 Crawford, Elizabeth ..................................... 23 Cristobal-Vazquez, Isidro M. ....................... 81, 91 Cronk, Caitlin ............................................... 109 Crosby, Kelli ................................................ 67, 70 Crutchfield, John .......................................... 125

Author Index

Cruz, Doris .................................................. 29 Cruz, Giovanni ............................................. 19, 38 Cruz, Javier .................................................. 93 Cruz, Liliana ................................................ 22 Cruz, Oscar .................................................. 93, 94 cruz, Yazely ................................................. 16 Cuautle, Luis ................................................ 58 Cubides Daza, Deivi Estid ........................... 25, 128 Cudney, Elizabeth ........................................ 35, 85 Cuevas, Jordan ............................................. 33 Cui, LiYing .................................................. 12 Cui, Xinxin .................................................. 88 Cumming, Douglas ...................................... 22 Cure, Laila ................................................... 14, 56 Curry, Guy L. .............................................. 43 Cutler, James ............................................... 49 D'Ambrosio, Alfred ..................................... 64 D'Souza, Roshan .......................................... 13 da Hora, Henrique ........................................ 52 Dababneh, Amer .......................................... 106 Dag, Ali ....................................................... 102 Dagli, Cihan ................................................. 32 Dai, Yingzhuo .............................................. 55 Damien, Paul ............................................... 68 Damodaran, Purushothaman ....................... 66, 67 Darabi, Houshang ........................................ 29, 42 Das, Biman .................................................. 47 Das, Kanchan ............................................... 6, 61 Das, Tapas ................................................... 13 Daskin, Mark ............................................... 49 Date, Ketan .................................................. 57 David, Victor ............................................... 3 Davila, Saylisse ........................................... 4, 62, 71, 93 Davis, Dorian ............................................... 51 Davis, Lauren .............................................. 4, 17, 103, 104 Dawud, Rana ............................................... 51 De la Garza, Cesia Lorena ........................... 34 De la Rosa, Juan Carlos ............................... 91 De León Sigg, María .................................... 66 De Luna, Raul .............................................. 64 De Steur, Hans ............................................. 97 De Steur, Hans ............................................. 120 Deb, Ashok .................................................. 36, 59 Deb, Shuchisnigdha ..................................... 16 Del Valle Barbosa, Zamira .......................... 71 Delaguila, Rolando ...................................... 21, 85 Delgado-Garza, Leopoldo ............................ 132 Dellaert, Nico P. .......................................... 57 Delpish, Ritson ............................................ 51 Demirel, Edil ............................................... 110 Demiryurek, Ugur ........................................ 81 Demmel, Johann .......................................... 125 Deneweth, Meredith .................................... 56, 114 Deng, Na ...................................................... 69 Deng, Shijie ................................................. 88 Deng, Xinwei ............................................... 105 DePuy, Gail ................................................. 33 Deschamps, Fernando .................................. 40, 49, 57 Deshmukh, Abhijit ....................................... 68, 86 Dessouky, Maged ........................................ 25, 31,100 Dessureault, Sean ......................................... 25 Deuse, Jochen .............................................. 17 Devall, Tom ................................................. 15 Devine, David .............................................. 124 Di Schiena, Raffaella ................................... 65 Diaz, Maria Carolina ................................... 132 Dickson, John .............................................. 66

Dieck Assad, Antonio .................................. 124 Dinova, Nigara ............................................. 9 Direkci, Resat Batuhan ................................. 57 Dixon, Gene ................................................. 64 Dolan, Kelsey ............................................... 78 Domingo, John Michael ............................... 117 Domínguez Domínguez, Jorge ..................... 77, 110 Dong, Jingyan .............................................. 25, 32 Donnelly, John ............................................. 40 Donovan, Jennifer ........................................ 9 Doolen, Toni ................................................ 74 Dora, Manoj ................................................. 97, 120 Dorlette Paul, Melissa .................................. 34, 50, 86 Dorneich, Michael ........................................ 101 Douglas-Ntagha, Pamela .............................. 130 Douglas-Ntagha, Pamela .............................. 133 Downing, Craig ............................................ 40 Drzymalski, Julie .......................................... 99 Duarte, Susana .............................................. 64 Duke, Steve .................................................. 19 Dulgeroglu, Onur ......................................... 25 Dulin, John ................................................... 36 Durham, Ken ................................................ 20 Dursun, Pinar ................................................ 12 Düzdar, Irem ................................................ 72 Eapen, Shaiju ................................................ 132 East, Joseph .................................................. 16 Edwards, Thomas ......................................... 112 Egbue, Ona ................................................... 56 Egilmez, Gokhan .......................................... 17, 74, 91 Eksioglu, Burak ............................................ 24, 128 Eksioglu, Sandra ........................................... 1, 112 El-Tamimi, Abdulaziz .................................. 13, 105 Elattar, Ahmed ............................................. 64 Ell, Kathleen ................................................. 96 Elliott, Richard ............................................. 50, 122 Elliott, Riley ................................................. 114 Ellis, Kimberly ............................................. 15, 70 Ellis, Stephanie ............................................. 30 Ellis, William ............................................... 127 ELOMRI, ADEL .......................................... 13 Elsadig, Tarick ............................................. 105 Elsayed, Elsayed ........................................... 13, 62 Elshennawy, Ahmad ..................................... 2 Emsermann, Markus ..................................... 123 Enkawa, Takao ............................................. 41 Ercan, Sami .................................................. 72 Erdem, Ergin ................................................ 2, 42, 62 Erenay, Bulent .............................................. 74 Erera, Alan L. ............................................... 17 Ergin, Nil ...................................................... 60 Erkoc, Murat ................................................ 89, 105 Erohin, Olga ................................................. 17 Erthal, Milton ............................................... 52 Ertl, Susan M. ............................................... 62 Eschbacher, Greg ......................................... 23, 24 Eschenbach, Ted ........................................... 48, 52 Esmaeili, Mohammad Amin ......................... 104 Espino, Natalia ............................................. 99, 107 Espiritu Nolasco, Jose Francisco .................. 33, 60, 70, 107, 107 Estrada Monje, Anayansi ............................. 110 Evans, Gerald ............................................... 88 Evans, John .................................................. 15 Evans, Mark ................................................. 20 Eynan, Amit ................................................. 37 Eyre, Kevin .................................................. 15 Faber, Isaac .................................................. 102

Author Index

Fabri, Peter .................................................. 42 Fadnavis, Saket ............................................ 15 Fahnestock, Olivia ....................................... 86 Faidley, LeAnn ............................................ 78 Fairbanks, Rollin ......................................... 80 Falan, Sharie ................................................ 80 Farahmand, Kambiz ..................................... 36 Farhana, Zakia ............................................. 70 Farkas, Caroline ........................................... 51 Farris, Jennifer ............................................. 21, 52, 65, 94 Farrokhvar, Paiman ..................................... 95 Fasanya, Bankole ......................................... 46, 47 Favarolo, Corey ........................................... 40 Fearon, Micheal ........................................... 110 Fedele, Lorenzo ........................................... 86 Fedji, Chawki .............................................. 43 Fei, Shi ......................................................... 28 Feijoo, Felipe ............................................... 13 Felder, Frank ................................................ 51, 79 Felice, Ron ................................................... 124 Feng, Peter ................................................... 109 Feng, Qianmei ............................................. 6, 69 Feng, Yonghan ............................................. 26, 26 Fenzl, Mark .................................................. 51 Fernández, Lourdes ...................................... 5 Ferreira, Pedro ............................................. 52 Fiedler, Lauren ............................................. 62 Figueroa, Luis .............................................. 22 Fine, Charles ................................................ 11 Finke, Daniel ............................................... 55 Finke, Daniel A. ........................................... 98 Finney, Trudy .............................................. 119 Fisher, Amit ................................................. 114 Fisher, Katherine ......................................... 115, 133 Fishman, Paul .............................................. 9 Fitzgerald, Michael ...................................... 45 Flaherty, Brittany ......................................... 23, 24 Fletcher, Robert ........................................... 90 Flores, Idhaliz .............................................. 93 Flores, Myrna .............................................. 79, 113 Flynn, Roy ................................................... 82 Foley, Kevin ................................................ 124 Forbes, Lincoln ............................................ 114, 115, 118 Forero Riveros, Diana Carolina ................... 10, 132 Foster, J. Bennett ........................................ 114 Fourquet, Jessica .......................................... 93 Foxworthy, Patrick ...................................... 120 Frady, Kristin ................................................ 50 Franca, Paula ............................................... 51 Franz, Dustin ............................................... 106 Franzoni, Ana Lidia ..................................... 10 Fraser, Kym ................................................. 20 Fraser, Kym ................................................. 107 Frazier, Shree ............................................... 95 Fredendall, Lawrence .................................. 22, 56 Frederick, Dede ........................................... 95 Fredericks, Tycho ........................................ 14 Freivalds, Andris ......................................... 17 Frota, Enio ................................................... 70 Fu, Angela ................................................... 9 Fu, Lunce ..................................................... 100 Fu, Michael .................................................. 25, 55 Fuentes Rojas, Ever Angel ........................... 56, 88, 97 Furterer, Sandra ........................................... 2 Furuhata, Masabumi .................................... 31 Futrell, Benjamin ......................................... 66 Gad El Mola, Khaled ................................... 13, 105

Gade, Dinakar .............................................. 26 Gaehde, Stephan ........................................... 12 Galindo Pacheco, Gina ................................. 38 Gallik, Mary ................................................. 90 Galvan, Ivonne ............................................. 3 Gamboa, Libni .............................................. 56 Ganapathy, Subhashini ................................. 7, 18 Gandhi, Aditya ............................................. 58 Gangakhedkar, Shruti ................................... 120 Gannon, Patrick ............................................ 99 Garber, Lawrence ......................................... 1 Garcia, Carlos ............................................... 20 Garcia, Christopher ...................................... 28 Garcia, Ernesto ............................................. 75 Garcia, Julieta ............................................... 127 García, Nitza ................................................ 84 Garcia Alcaraz, Jorge Luis ........................... 110 Garcia Llinas, Guisselle Adriana .................. 30 Garcia-Diaz, Alberto .................................... 22, 41 García-León, Azucena Minerva ................... 2, 88 Garcia-Reyes, Heriberto ............................... 3, 34, 63, 113 Garrison, Teena ............................................ 20 Garza, Angela ............................................... 98 Garza-Venegas, Jorge ................................... 11 Gaston, Abigail ............................................ 45 Gatchel, Robert ............................................ 35 Gauthier, Ana ............................................... 19 Gazoli de Oliveira, Andre Luiz .................... 57 Gebraeel, Nagi .............................................. 44 Gedam, Subhash ........................................... 4 Gedik, Ridvan .............................................. 30, 54 Geetla, Tejswaroop ....................................... 48 Geiger, Christopher ...................................... 10, 32, 38, 79, 83, 107 Gel, Esma ..................................................... 30 Gellynck, Xavier .......................................... 97, 120 Gemmill, Douglas ........................................ 47 Genovese, Sean ............................................ 116 Gerber, Erin .................................................. 33 Gerdes, Murilo ............................................. 73 Geunes, Joseph ............................................. 1, 30, 50, 75 Ghalebani, Alireza ........................................ 13 Ghanbartehrani, Saeed .................................. 92 Ghazi Nezami, Farnaz .................................. 46 Ghobadi, Kimia ............................................ 72 Gholston, Sampson ....................................... 35 Ghoniem, Ahmed ......................................... 47 Gilbert, Stephen ............................................ 78 Gillis, William .............................................. 78 Gilson, Kyle ................................................. 49 Giordani da Silveira, Willian ........................ 57 Giorgianni, Joe ............................................. 46 Girimurugan, Senthil Balaji .......................... 32, 33 Glover, Wiljeana .......................................... 71, 85 Gnanasambandam, Nathan ........................... 27 Gnanasekaran, Arun Mohan ......................... 109 Gnaneswaran, Vettrivel ................................ 4, 10, 102, 108, 112 Goentzel, Jarrod ........................................... 11 Goethals, Paul .............................................. 29, 74, 81 Gokbayrak, Kagan ........................................ 12 Gokhan, Mehmet .......................................... 56 Golden, Bruce .............................................. 69 Goldsby, Thomas ......................................... 61 Goldstein, Michael ....................................... 59 Golias, Mihalis ............................................. 24 Gómez Montoya, Diego José ....................... 9, 41 Gómez-Fuentes, Patricia .............................. 2 Gonela, Vinay .............................................. 23, 36, 42

Author Index

González, Miguel ......................................... 3, 43 Gonzalez Aleu, Fernando ............................ 40, 47 Gonzalez Aleu, Fernando ............................ 85 Gorahava, Kaushik ...................................... 1 Gordon, Peter ............................................... 81 Gordon, Tamika ........................................... 70, 88 Goren, Selcuk .............................................. 100 Gorkhali, Anjee ........................................... 21, 85 Gouvea da Costa, Sergio E. ......................... 49, 52, 57 Gozuacik, Devrim ........................................ 76 Grabenstetter, Doug ..................................... 106 Graham, Andrea ........................................... 41 Gralla, Erica ................................................. 11 Gramopadhye, Anand .................................. 34, 50, 86 Granda-Marulanda, Nelson .......................... 41 Grantham, Katie ........................................... 74 Grasman, Scott ............................................. 41, 58 Graunke, Adam ............................................ 5 Grayson, Kevin ............................................ 125 Green, Denethia ........................................... 55 Greene, Christopher ..................................... 106 Gregory, Erik ............................................... 56 Greig, Michael ............................................. 37, 70 Grey, William .............................................. 94 Grienitz, Volker ........................................... 49, 83 Griffin, Marie .............................................. 131 Griffin, Paul ................................................. 72, 73, 86 Grimshaw, Nicholas .................................... 56 Gross, Michael ............................................. 85 Gu, Siyuan ................................................... 112 Gualteros Tellez, Mirta Yadira .................... 25, 128 Guan, Yongpei ............................................. 30, 63 Guardiola, Ivan ............................................ 75 Guarrera, Theresa ........................................ 51, 80 Guerrero Galindo, Diana Jaqueline .............. 120 Guerrero Rodríguez, Camilo ........................ 16 Guidry, Jamie .............................................. 106 Gunes, Kubra ............................................... 77 Guo, Cong .................................................... 35 Guo, JingJing ............................................... 19 Guo, Xiaoyu ................................................ 59 Gupta, Aman ................................................ 33, 105 Gutierrez, Karla ........................................... 112 Gutiérrez González, Eduardo ....................... 85, 91 Gutman, Alex .............................................. 59, 76 Gutta, Rajesh ............................................... 59 Güney, Evren ............................................... 72 Haapala, Karl R. .......................................... 91 Haddad Sisakht, Seyyed Ali ........................ 13 Hafizoglu, Baykal ........................................ 30 Hagge, Matt ................................................. 78 Haghani, Ali ................................................ 126 Hakimi, Driss ............................................... 57 Halder, Avimanyu ....................................... 112 Halldorson, Michael .................................... 12 Hamar-Lagroun, Tatiana .............................. 132 Hamel, William ........................................... 36 Hamidi, Maryam .......................................... 13 Hamzic, Zlatan ............................................. 35 Han, Bernard ................................................ 80 Han, Guanghua ............................................ 48 Han, Xue ...................................................... 102 Han, Ying .................................................... 18, 103, 112 Hancerliogullari, Gulsah .............................. 22 Hannon, John ............................................... 104 Hanson, Gregory J. ...................................... 12 Harms, Kimberly ......................................... 14

Harris, Jessica ............................................... 131 Harris, Matthew ............................................ 6 Harrysson, Ola .............................................. 30, 45 Harrysson, Ola .............................................. 76 Hartman, Joseph ........................................... 35, 48, 55, 75 Harvey, Bart J. .............................................. 103 Hausicke, Michael ........................................ 49, 83 Hawkins, Caitlin ........................................... 96 Hayati, Fazel ................................................ 86 Haynes, Mark ............................................... 107 He, Xiaofei ................................................... 110 He, Yiling ..................................................... 2, 23 He, Yunfei .................................................... 80 Heaney, Michael ........................................... 20 Hegde, Sudeep .............................................. 80 Heier Stamm, Jessica .................................... 67 Heim, Joseph ................................................ 9, 29 Hejrani, Sasan .............................................. 44 Helm, Jonathan ............................................. 109 Hening, Dyah ............................................... 40 Henry, Andrew ............................................. 15 Heragu, Sunderesh ....................................... 33,73, 101, 109 Herman, Ted ................................................. 18 hernandez, ivan ............................................ 61 Hernandez-Riaño, Helman ........................... 99 Herrera Restrepo, Oscar ............................... 38 Herrick, Daniel ............................................. 116, 118 Herrmann, Jeffrey ......................................... 8, 22, 34 Hester, Patrick .............................................. 60, 104, 124 Hewitt, Michael ............................................ 58, 96 Heydar, Mojtaba ........................................... 1 Hickmon, Virgie ........................................... 119 Hill, Jonathan ............................................... 35 Hill, Raymond .............................................. 29, 59, 73, 76 Hinojosa, Juan .............................................. 94 Hirsch, Michael ............................................ 5, 43 Hmar-Lagroun, Tatiana ................................ 130, 133 Ho, Johnny C. ............................................... 20, 107 Hodge, Bri-Mathias ...................................... 20 Hodgson, Thom ............................................ 55 Hoeg, KeAnne .............................................. 65 Hoerning, Steven .......................................... 17 Holmes, Mindy ............................................. 122 Homem-de-Mello, Tito ................................ 47 Horn, Timothy .............................................. 76 Horntrop, David J. ........................................ 82 Horvat, Matthew ........................................... 118 Hosseini, Narges ........................................... 23, 56 Hostetler, Seth .............................................. 109, 117 Hou, Tien Fa ................................................. 28 Hourselt, Gary .............................................. 15, 126 Hu, Boyi ....................................................... 39 Hu, Guiping .................................................. 48, 101 Hu, Jian ........................................................ 47 Hu, Mengqi .................................................. 20, 94 Hua, Dingguo ............................................... 62 Huang, Chun-Che ......................................... 19, 20, 107 Huang, Hao .................................................. 29 Huang, Hsin-Chan ........................................ 68 Huang, Tingting ........................................... 104 Huang, Yu .................................................... 7 Huang, Yu-Li ............................................... 80 Huang, Yunchen ........................................... 20, 108 Huang, Yuping ............................................. 6, 26 Huddleston, Matthew ................................... 21 Huebinger, Tyler .......................................... 25 Huerta, Beatriz ............................................. 127

Author Index

Huggins, Anali ............................................. 16, 54, 108, 112 Hulett, Maria ................................................ 67 Hulse, Rick .................................................. 116 Hummer, Doug ............................................ 65 Hung, Ying .................................................. 51 Hunt, Kelly .................................................. 44 Hurley, Brion ............................................... 118, 119 Huschka, Todd R. ........................................ 75 Hussein, Mazen ........................................... 85 Hutchison, Kenneth ..................................... 38, 76 Huynh, Nathan ............................................. 22 Ibarra, Ana ................................................... 3 Ibarra, Jesusita ............................................. 112 Idoye, Emeka ............................................... 47 Iglesias, Karla .............................................. 88 Ikuma, Laura Hughes ................................... 77 Imrhan, Sheik 56, ......................................... 100 Ingram, Elijah .............................................. 67 Iqbal, Gazi ................................................... 65 Irazabal, Eglys ............................................. 130 Irizarry, María .............................................. 3 Irohara, Takashi ........................................... 48 Irving, Helen ................................................ 59 isaza, clara ................................................... 16 Isaza, Clara E. .............................................. 19 Isidoro, Trueba ............................................. 112 Ituarte-Villarreal, Carlos .............................. 107 Ivy, Julie Simmons ...................................... 4, 44, 75 Iyengar, Deepak ........................................... 61 Iyer, Ranganath ............................................ 133 Jabali, Ola .................................................... 57 Jackman, John .............................................. 38, 47, 78 Jackson, John ............................................... 55, 76 Jackson, Steven ............................................ 76 Jackson Glover, Wiljeana ............................ 127 Jacobson, Sheldon ....................................... 25 Jafari, Mohsen ............................................. 80 Jaffray, David .............................................. 72 Jahanpour, Ehsan ......................................... 54 Jahn, Michelle .............................................. 29 Jalao, Eugene Rex ........................................ 5, 59 Jang, Wooseung ........................................... 15, 69, 70 Jannone, Mark ............................................. 117 Jaques, Robin ............................................... 126 Jardine, Andrew K.S. ................................... 18, 103 Jaridi, Majid ................................................. 63 Jarugumilli, Shrikant .................................... 41, 58 Javadpour, Leili ........................................... 89, 98,106, 112 Jawahir, I.S. ................................................. 61 Jensen, Dean ................................................ 56 Ji, shuguang ................................................. 105 Ji, Yizhen ..................................................... 69 Jiang, Ruiwei ............................................... 63 Jiang, Steven ................................................ 4, 17, 51, 60, 70 Jiang, Zongliang .......................................... 14, 36, 100 Jimenez, Jesus .............................................. 25 Jin, Kai ......................................................... 43 Jin, Mingzhou .............................................. 1, 22, 31, 41 Jin, Ran ........................................................ 47, 104, 105 Jin, Shan ....................................................... 24, 33 Jin, Shengpeng ............................................. 73 Jin, Tongdan ................................................. 6, 25, 26, 51, 105 Jin, Yue ........................................................ 31 Jobi-Taiwo, Adebolaji ................................. 35 Johannes, Tay .............................................. 109 Johns, Brian ................................................. 18 Johnson, Andrew ......................................... 48

Johnson, Isabelle .......................................... 118 Johnson, Sharon ........................................... 1, 9, 21 Joledo, Oloruntomi ....................................... 45, 99 Jones, Albert ................................................. 99 Jones, Erick .................................................. 4, 10, 102 Jonnalagadda Thimothy, John Benhur ......... 55 Joshi, Sanjay ................................................. 106 Joukar, Alireza ............................................. 117 Ju, Feng ........................................................ 83 Judd, Robert ................................................. 10 Junghanns Albers, Walther ........................... 129 K, Ganesh ..................................................... 77 Kacar, Baris .................................................. 104 Kaganovskiy, Leon ....................................... 120 Kamali, Behrooz ........................................... 16 Kaminsky, Phil ............................................. 87 Kammerdiner, Alla ....................................... 70 Kamrani, Ali ................................................. 106, 112 Kanaan, Abir ................................................ 9 Kang, Hyun-Wook ....................................... 76 Kang, Rui ..................................................... 62 Kang, Yuncheol ............................................ 72, 73 Kapur, Kailash .............................................. 39 Karabak, Fahriye .......................................... 77 Karakas, Hacer Ezgi ..................................... 76 Karam, Matthew ........................................... 18 Karatas, Aslihan ........................................... 75 Kardar, Laleh ................................................ 65 Karwan, Mark .............................................. 43, 100 Karwowski, Waldemar ................................. 2, 16, 23, 34, 38, 107 Kase, Sue ...................................................... 42 Kasmo, Salah ................................................ 41 Katepalli, Kranthi ......................................... 105 Kaushal, Rainu ............................................. 80 Kay, Michael ................................................ 102 Kayali, Onur ................................................. 12 Kazemersky, Philip ...................................... 20 Keathley, Heather ......................................... 40, 52 Keedy, Elias ................................................. 69 Keene, Karen ................................................ 112 Kelly Lee, Patricia ........................................ 121 Kelton, Kari .................................................. 73 Keng, Naiping .............................................. 41 Keskinocak, Pinar ......................................... 30 Khader, Maher .............................................. 43 Khadgi, Prajwal ............................................ 88 Khaleghei Ghosheh Balagh, Akram .............. 4, 38 Khan, Awais ................................................. 112 Khandoker, Ahsan ........................................ 97 Kharoufeh, Jeffrey ........................................ 49 Khasawneh, Mohammad .............................. 59, 67, 70, 103 Khazaeli, Mehdi ........................................... 89, 98, 106 Kheirkhah, Parviz ......................................... 46 Kheirkhah, Parviz ......................................... 125 Kho, Jenniefer .............................................. 18 Khoda, AKM ................................................ 32 Khojandi, Anahita ........................................ 75 Khrais, Samir ................................................ 93 Kilinc, Mehmet ............................................ 103 Kim, Byungjoon ........................................... 80 Kim, Dongchel ............................................. 37 Kim, Inki ...................................................... 24, 89 Kim, James ................................................... 76 Kim, Kyoung-Yun ........................................ 91 Kim, Namhun ............................................... 37 Kim, Sukgon ................................................ 87 Kim, Younghak ............................................ 37

Author Index

King, Eric .................................................... 103 King, Peter ................................................... 121 King, Russell E. ........................................... 50,55 Kirac, Emre .................................................. 67 Kirkpatrick, Jane .......................................... 78 Kirpes, Carl .................................................. 78 Kitapci, Mehmet Tevfik ............................... 86 Klee, George ................................................ 62 Klein, Cerry ................................................. 61, 70 Klote, Michael ............................................. 68 Klutke, Georgia-Ann ................................... 40 Knapp, Gerald M. ........................................ 84, 89, 98, 106, 112 Ko, Hoo Sang .............................................. 44 Koc, Bahattin ............................................... 32, 76 Koenig, Sven ............................................... 31 Koikkara, Reshmi ........................................ 34, 50, 86 Koksalmis, Emrah ....................................... 28 Konak, Abdullah .......................................... 14, 85 Kong, Dongjoon .......................................... 44, 83 Kong, Nan .................................................... 8, 23 Konur, Dincer .............................................. 24, 75 Koo, Benjamin ............................................. 28 Koonce, David ............................................. 40, 112 Kopriva, Cody ............................................. 56 Kotnour, Timothy ........................................ 64 Koursaris, Constantine ................................. 73 Kovach, Jamison .......................................... 83 Krebs, Matthias ............................................ 17 Kring, Jason ................................................. 45 Kringen, Michelle ........................................ 39, 56, 78 Krishnamoorthi, Kalikathan ......................... 127 Krishnamurthy, Ananth ............................... 28, 85, 86, 87 Kristiansen, Per ............................................ 49 Krugle, Marie .............................................. 119 Krupski, Tracey ........................................... 44 Krus, Daniel ................................................. 74 Kucuk, Yaprak ............................................. 77 Kucukgul, Can ............................................. 76 Kucukvar, Murat .......................................... 89, 91 Kuhl, Michael .............................................. 23 Kuhlang, Peter ............................................. 17 Kulakov, Nikolay ......................................... 48 Kulakova, Anastasia .................................... 48 Kulkarni, Anirudha ...................................... 41 Kulturel-Konak, Sadan ................................ 14, 85 Kulvanitchaiyanunt, Asama ......................... 89 Kumar, Dhirendra ........................................ 124 Kumar, Piyush ............................................. 66 Kumara, Soundar ......................................... 12, 24, 38, 55, 68, 72, 98 Kundakcioglu, Erhun ................................... 95 Kundakcioglu, Erhun ................................... 107 Kung, Pin ..................................................... 66 Kuo, Way ..................................................... 47 Kuriger, Glenn ............................................. 59 Kurt, Murat .................................................. 75 Kurtul, Emre ................................................ 50 Kurz, Mary .................................................. 15, 64 Kusiak, Andrew ........................................... 110 Kvam, Paul .................................................. 55 Kweon, SangJin ........................................... 81 L Kassaei, Maryam ...................................... 44 Lafser, Kathi ................................................ 124 Lahrichi, Nadia ............................................ 54, 129 Lam, Quincy ................................................ 29 Lam, Sarah ................................................... 18, 27, 59, 79, 902 Lan, George ................................................. 81 Lan, Tian ..................................................... 30

Landis, Amy ................................................. 21 Landsberger, Michael ................................... 22 Laporte, Gilbert ............................................ 98 Lascelles, Duncan ......................................... 76 Lashkari, Reza .............................................. 61 Lassiter, Kyle ............................................... 11 Lavaei, Javad ................................................ 6 Lavelle, Jerome ............................................ 27 Lavergne, David ........................................... 99 Lawley, Mark ............................................... 36 Lawrence, Marks .......................................... 34 Le, Trung ...................................................... 82 Leaven, Laquanda ........................................ 42 Leber, Dennis ............................................... 8 LeBoulluec, Aera ......................................... 35 Lee, Bruce .................................................... 65, 95 Lee, Changhyeok .......................................... 6 Lee, Eva ....................................................... 61 Lee, Fei Hoai ................................................ 59 Lee, Sang Jin ................................................ 55, 76 Lee, Seokcheon ............................................ 12, 33, 36, 109, 117 Lee, Wei-jen ................................................. 89 Lee, Yuan-Shin ............................................ 76, 106 Leger, Yvette ................................................ 129 Lehto, Mark .................................................. 99 Lei, Ting ....................................................... 80, 92, 95 Leicht, Robert M. ......................................... 58 Leite, Luciana R. .......................................... 40, 52 Leiter, Megan ............................................... 73 Letens, Geert ................................................ 52, 65 Letowski, Tomasz ........................................ 46 Leu, Paul ...................................................... 25 Leuschner, Mark ........................................... 56 Lewis, Harold ............................................... 45, 48 Lewis, Mark ................................................. 37 Lewis, Neal .................................................. 48, 52 Li, Di ............................................................ 7, 90 Li, Fei ........................................................... 80 Li, Hua ......................................................... 43 Li, Jingshan .................................................. 29, 62, 83, 98 Li, Juan ......................................................... 6 Li, Mingyang ................................................ 62, 69 Li, Muyuan ................................................... 2, 16, 23 Li, Qing ........................................................ 17, 85 Li, Qingwei .................................................. 89, 112 Li, Rong ....................................................... 6 Li, Wennian .................................................. 15 Li, Xueping .................................................. 7, 23, 28, 35, 37, 56, 60, 63 Li, Yihua ...................................................... 48 Li, Zhaojun ................................................... 4, 4 Li, Zhiguo ..................................................... 19 Li, Zhongya .................................................. 23, 28, 37 Liang, Xinle .................................................. 23, 28, 37 Liang, Zhe .................................................... 54 Liao, Haitao .................................................. 13, 26 Liegel, Barbara A. ........................................ 29 Lim, Churlzu ................................................ 110 Lim, Gino ..................................................... 65, 93, 96 Lim, Jung ..................................................... 65 Lim, Sunghoon ............................................. 65 Limere, Veronique ....................................... 71 Limon, Shah ................................................. 112 Lin, Chun-yu ................................................ 52 Lin, Kun-Xian .............................................. 19 Lin, Li ........................................................... 80, 99 Lin, Po-Chen ................................................ 104 Lin, Tachun .................................................. 11

Author Index

Ling, Chen ................................................... 107 Littlejohn, Samuel ....................................... 96 Liu, Andrew ................................................. 24 LIU, CHEN-YU ........................................... 68 Liu, Cheng ................................................... 7 Liu, Cong ..................................................... 6 Liu, Dahai .................................................... 45, 88 Liu, Gang ..................................................... 89 Liu, Heping .................................................. 62 Liu, Hongcheng ........................................... 19 Liu, Jian ....................................................... 14, 62, 69 Liu, Kaibo .................................................... 6, 96 Liu, Pai ........................................................ 96 Liu, Stewart ................................................. 87 Liu, Wei ....................................................... 65 Liu, Wen-Hsing ........................................... 21 Liu, Xiao ...................................................... 45 Liu, Yang ..................................................... 73 Lloyd, Whitney ............................................ 7, 90 Lobo, Benjamin ........................................... 55 Loera-Hernandez, Imelda de Jesus ............... 3, 94, 113 Logendran, Rasaratnam ............................... 60 Loggins, Ryan .............................................. 3 London, Jeremi ............................................ 47, 78 Londono, Sergio .......................................... 2 Long, Suzanna ............................................. 3, 40, 56, 101, 108 LONGOBARDI, TERESA .......................... 105 Lopez, José .................................................. 71 Lopez, Keishla ............................................. 33 Lopez, Mike R. ............................................ 64 Lopez, Nicolas ............................................. 33, 70, 107 Lopez, Raul .................................................. 70 López Bello, César Amílcar ......................... 16 López de Cosío, José Alfredo ...................... 91 López-Molina, Maria Guadalupe ................. 91 Lorenzo, Enery ............................................ 16 Lou, Chenlu ................................................. 84 Love, David ................................................. 110 Lozano, Miguel ............................................ 46 Lozano Yepes, Jineth Hasbleidy .................. 131 Lu, Huitian ................................................... 102 Lu, Susan ..................................................... 59, 102 Lu, Yan ........................................................ 80 Luo, Gaohao ................................................ 15 Lurvey, Raychal ........................................... 16 Luxhoj, James .............................................. 32, 54, 54 Ma, Jing ....................................................... 30 Ma, Juan ...................................................... 48 Ma, Junfeng ................................................. 81, 95 Ma, Xiaoyu .................................................. 9 Maalouf, Maher ........................................... 97 Maass, Kayse ............................................... 49 Machado, Virgilo ......................................... 15, 64 Macht, Gretchen .......................................... 58, 89 MacKenzie, Cameron .................................. 16 Macy, Michelle ............................................ 16 Madadi, Mahboubeh .................................... 44 Madrigal, Johanna ....................................... 56 Magagnotti, Mariah ..................................... 61 Maggelet, Nathan ......................................... 90 Magill, John ................................................. 7, 14 Magpili, Nina Cristina ................................. 0 Mahajan, Chaitanya ..................................... 68 Mai, Nhi ....................................................... 51 Maillart, Lisa ............................................... 75 Majzoubi, Farshad ....................................... 101, 109 Makis, Viliam .............................................. 4, 38

Makris, Alexia .............................................. 9, 86 Malak, Richard ............................................. 74 Malavé, César ............................................... 40, 55 Maleki, Sima ................................................ 98 Mallak, Larrry .............................................. 124 Mallum, Faisal .............................................. 59, 70, 81, 85, 104 Mance, Christopher ...................................... 82 Mandal, Paras ............................................... 20, 107 Mandala, Supreet .......................................... 55 Manogharan, Guha Prasanna ........................ 45, 68 Marcellin-Little, Denis ................................. 76 Marcotte, Suzanne ........................................ 64 Mardookhy, Minoo ....................................... 67, 74 Marella, Lavanya .......................................... 58 Mares Castro, Armando ............................... 77 Marin, Mario ................................................ 10, 45, 99 Marín, Rosaurelis ......................................... 93 Marks, Lawrence .......................................... 9 Marmolejo, Francisco ................................... 127 Marquette Tadlock, Abbey ........................... 20, 21 Marrero, Wesley ........................................... 92 Marsh, J. Lawrence ...................................... 18 Marshall, Paul .............................................. 44, 83, 127 Martagan, Tugce ........................................... 28 Martin, Jay D. ............................................... 98 Martin, Kevin ............................................... 84 Martinelli, David .......................................... 22 Martinez, Cecilia .......................................... 71, 79 Martinez, Diego ............................................ 109 Martinez, Ethel ............................................. 112 Martinez del Rio, Sofia ................................ 10 Martinez Gamboa, Jeyson Andres ................ 88 Martínez Hernández, Diana Carolina ........... 93, 130 Martins, Roberto Antonio ............................. 52 Martos, Borja ................................................ 132 Martukanitz, Rich ......................................... 106 Masek, Christopher ...................................... 85 Masel, Dale .................................................. 64 Mason, Jennifer ............................................ 44 Mason, Scott ................................................. 61, 69, 87 Mata, Fernando ............................................ 123, 124, 125 Matamoros Ghisays, David .......................... 120 Matis, Timothy ............................................. 84 Matson, Jessica ............................................. 27 Matthews, Sky .............................................. 114 Mattie, Colby ................................................ 35 Mau, Ronald ................................................. 105 May, Eric ...................................................... 126 Mayorga, Maria ............................................ 4, 37, 44, 102 Mayorga Torres, Oscar ................................. 10, 25, 74, 77, 93, ...................................................................... 121, 128, 130, 131, 132 Mays, Gary ................................................... 7 Mazur, Lukasz .............................................. 7, 9, 34, 65 Mazzuchi, Thomas A. .................................. 85 McBride, Maranda ....................................... 46, 47 McCarthy, Brian ........................................... 130 McCarthy, Mary ........................................... 18 McClymonds, Ken ....................................... 128 McComb, Sara .............................................. 78 , 86, 100 McCreery, John ............................................ 7 McGeorge, Nicolette .................................... 80 McGinnis, Leon ............................................ 24, 27, 31 McGinnity, Kelly ......................................... 11 McGuire, Michael ........................................ 104 Mclay, Laura ................................................ 37 McManus, Hugh ........................................... 34 McManus, Kevin .......................................... 114

Author Index

McManus, Kevin ......................................... 116 McManus, Kevin ......................................... 122, 126 Mears, Laine ................................................ 64 Medal, Hugh ................................................ 90 Medeiros, Deborah ...................................... 109 Medellin, Jose .............................................. 6 Medina, Lourdes A. ..................................... 19, 38, 71, 73 Medina-Borja, Alexandra ............................ 40, 71 Megahed, Fadel ........................................... 39, 102 Mehrotra, Sanjay ......................................... 6, 47 Mehta, Ranjana ............................................ 34, 63 Mejjaouli, Sobhi .......................................... 53 Melachrinoudis, Emanuel ............................ 92 Meller, Russell ............................................. 8, 21, 70 Melton, Brittany ........................................... 95 Mendez, Francis ........................................... 25 Mendez, Luis ............................................... 132 Mendez, Yaileen .......................................... 76 Méndez Rivas, Edith Yarlet ......................... 93 Méndez-Piñero, Mayra ................................ 3, 39, 50, 88 Mendoza, Abraham ..................................... 77 Mendoza, Hector ......................................... 99 Mendoza Gómez, Rodolfo ........................... 35 Meng, Ning .................................................. 43 Mercer, Daniel ............................................. 20 Merrick, Jason ............................................. 53 Messner, Jack .............................................. 29 Meyers, Lauren ............................................ 68 Meza, Katherine ........................................... 131 Miguel, Verónica ......................................... 94 Milburn, Ashlea ........................................... 67 Miller, Anthony B. ....................................... 103 Miller, Chad ................................................. 81, 97 Miller, J.O. ................................................... 73 Miller, Ryan ................................................. 29 Miller, Stacey .............................................. 59 Million, Kathy ............................................. 15 Mills, Andrew .............................................. 20 Min, K. Jo .................................................... 22, 47, 84 Mineart, Jeanine ........................................... 128 Mines, Jennifer ............................................ 81 Mintmire, Elizabeth ..................................... 107 Mitchell, Kenneth ........................................ 30 Miville, Nina ................................................ 123 Mo, Weiwei ................................................. 89 Moeini, Seyed Soroush ................................ 82 Moench, Lars ............................................... 104 Moghaddam, Kamran .................................. 46 Moghaddam, Mohsen .................................. 109 Mohan, Radhe .............................................. 65 Mohebbi, Shima ........................................... 56, 63 Molina-Rivera, Gualberto ............................ 93 Monplaisir, Leslie ........................................ 35 Montanari, Roberto ...................................... 101 Montemayor, Andrés ................................... 121 Montreuil, Benoit ......................................... 8, 57, 64 Montreuil, Zachary ...................................... 8, 57 Montufar, Marco .......................................... 92 Moore, Christopher ...................................... 63 Moore, James ............................................... 81 Moore, Melba .............................................. 124 Moorman, Jasmine ....................................... 96 Moraga, Reinaldo ........................................ 19 Morelock, John ............................................ 7 Moreno, Olivia ............................................. 66 Morgan, Shona ............................................. 4 Morton, David ............................................. 68

Mosaly, Prithima .......................................... 34 Mosaly, Prithima Reddy ............................... 9 Moshref-Javadi, Mohammad ........................ 33, 109 Moulder, Roger ............................................ 59 Mousavian, Seyedamirabbas ........................ 46 Mowrey, Kim ............................................... 86 Moya, Hiram ................................................ 43 Moya-Lopez, Nohemi .................................. 132 Moyer, Lucy ................................................. 46 Moyo, Yamkelani ......................................... 15 Moyo, Yamkelani ......................................... 15 Muaafa, Mohammed .................................... 10 Mubayi, Anuj ............................................... 1 Muckstadt, John ........................................... 6 Mueller, Jessica ............................................ 20 Mukherjee, Ishan .......................................... 82 Mukherjee, Shantanu .................................... 112 Mumani, Ahmad ........................................... 93 Murali, Karthik ............................................. 99 Murat, Alper ................................................. 43 Muratore, John ............................................. 54 Murillo, Roberto ........................................... 128 Murley, D. Jason .......................................... 109 Murman, Earll .............................................. 34 Murray, Chase .............................................. 24 Murray, Susan .............................................. 74 Musunuri, Shruthi ......................................... 119 Muthuswamy, Shanthi .................................. 66, 112 Mutlu, Fatih .................................................. 13 N, Ramkumar ............................................... 77 Nacak, Melis ................................................ 57 Nachtmann, Heather ..................................... 30, 41, 82, 101, 103 Naderkhani Zarrin Ghabaei, Farnoosh ......... 4, 38 Nagaiah, Narasimha ..................................... 38 Nagarajan, Mahesh ....................................... 16 Nagarur, Nagen ............................................ 103, 112 Nageshwaraniyer, Sai Srinivas ..................... 25, 68 Nagi, Rakesh ................................................ 5, 30, 43, 57 Nahmens, Isabelina ...................................... 117 Nair, Harish .................................................. 102 Nakhostin Maher, Zahra ............................... 6 Nallamothu, Phani ........................................ 55 Nambiar, Siddhartha ..................................... 34 Namen Leon, Martha Isabel ......................... 103 Nanda, Gaurav .............................................. 99 Nandi, Apurba .............................................. 90 Nanduri, Vishnu ........................................... 13 Naranjo, Arnulfo .......................................... 133 Narasimhan, Chakravarthi ............................ 37 Natale, James ................................................ 60, 72 Naumann, André .......................................... 74 Navarro, Carlos ............................................ 133 Navas, Helena .............................................. 15 Naveh, Eitan ................................................. 85 Nazareth, Martin ........................................... 126 Nazzal, Dima ................................................ 26 Needy, Kim .................................................. 21 Negahban, Ashkan ....................................... 8 Negron, Felix ................................................ 5, 117 Negron, Felix ................................................ 131 Nembhard, David ......................................... 42, 58, 89 Nepal, Bimal ................................................ 112 NERIZ, LILIANA ........................................ 88 Neuhofs, Scott .............................................. 7 Neumann, Patrick ......................................... 37, 70 Nevins, Lashawn .......................................... 39 Newell, Elizabeth ......................................... 96

Author Index

Neyens, David ............................................. 67 Ng, Ean-Harn ............................................... 40 Nicholls, Gillian ........................................... 28, 48, 52, 101 Niezen, Circe ............................................... 122 Nightingale, Deborah ................................... 12 Nikolaev, Alexander .................................... 42, 75 Nimbarte, Ashish ......................................... 39, 63 Ning, Xiaopeng ............................................ 39, 63 Noble, Gregory ............................................ 26 Noble, James ................................................ 15, 69 Nof, Shimon ................................................ 31, 44 Noori, Mehdi ............................................... 96 Noriega-Asturias, Jorge ............................... 124, 133 Norman, Bryan ............................................ 51, 65, 95 Norouzi, Amirhossein .................................. 3 Norton, Matthew .......................................... 81, 88, 90 Nourollahi, Sevnaz ...................................... 95 Nowicki, David ............................................ 61 Ntuen, Celestine ........................................... 47, 70 Nuno, Pablo ................................................. 91 Nuño, Pablo ................................................. 91 Nuño de la Parra, José Pablo ....................... 118 Nuño de la Parra, Jose Pablo ....................... 129 Nurre, Sarah ................................................. 22, 84 Nussbaum, Maury ........................................ 63 O'Boyle, Liam .............................................. 124 O'Donnell, Casey John ................................. 123 O'Gara, Tara Lynn ....................................... 16 Oates, Dennis ............................................... 117 Oates, Dennis ............................................... 128 Obeidat, Ahmad ........................................... 67, 112 Obeidat, Mohammed ................................... 77 Occeña, Luis ................................................ 18, 59, 68, 83 Odelowo, Babafemi ..................................... 33 Ogaard, Kirk ................................................ 42 Ogrinc, Mary ............................................... 7, 72, 90 Oh, YeongGwang ........................................ 37 Ohmori, Shunichi ......................................... 57 Ojeda-Camargo, Edgar ................................ 99 Ojha, Chirag ................................................ 69 Okore-Hanson, Anyama .............................. 17 Okudan, Gul ................................................ 24, 30, 52, 58, 81, ...................................................................... 89, 91, 95 Okudan Kremer, Gul E. ............................... 30, 38, 42, 80, 89, 92 Olivares, Elias .............................................. 133 Omitaomu, Olufemi ..................................... 7, 24 Omwando, Thomas ...................................... 39 Onat, Nuri C. ............................................... 89 Oncel, Asli Gul ............................................ 50 Onkham, Wilawan ....................................... 22, 53, 64, 113 Ordonez, Fernando ...................................... 31 Orfi, Nihal .................................................... 83 Orman, Eric ................................................. 102 Orozco, Andres ............................................ 97 Ortiz, Nicole ................................................ 16 Ortiz-Muñiz, Karla ...................................... 79 Ortiz-Pena, Hector ....................................... 5, 43 Osafo-Yeboah, Benjamin ............................ 70 Osborne, Quinte ........................................... 106 Osmani, Atif ................................................ 23, 36, 42 Otieno, Wilkistar ......................................... 39 Overcash, Michael ....................................... 104 Ozbas, Birnur ............................................... 93 Ozbolat, Ibrahim Tarik ................................ 12, 25, 32, 55, 61, 61, 106 Ozelkan, Ertunga ......................................... 64, 66, 110 Ozen, Merve ................................................ 85 Ozkaynak, Mustafa ...................................... 1, 9

Ozler, Saime Burce ...................................... 76 Oztanriseven, Furkan ................................... 41 Oztekin, Asil ................................................ 102 Pacheco, Paola .............................................. 62 Pacheco, Tamarys ......................................... 38 Pacheco, Zilma ............................................. 117 Padilla, Kristina ............................................ 80 Padilla, Marianella ....................................... 19 Paek, Joshua ................................................. 14 Pagani, Paolo ................................................ 71 Palak, Gokce ................................................ 1 Pan, Tianyi ................................................... 75 Pandian, Annamalai ..................................... 76 Pandit, Anala ................................................ 101 Paquet, Victor ............................................... 51 Parhizi, Shaghayegh ..................................... 34 Parikh, Pratik ................................................ 8, 23 Paris, Joseph ................................................. 116 Park, Angela ................................................. 9 Park, Chiwoo ................................................ 33 Park, Haeseung ............................................. 37 PARK, KIJUNG ........................................... 30 Park, Namkyu ............................................... 102 Parlak, Ayse ................................................. 49 Parnell, Gregory ........................................... 32, 53 Parra, Carlos ................................................. 28 Parsa, Payam ................................................ 27 Parsaei, Hamid ............................................. 93, 96 Parson, Carl .................................................. 29, 59 Pastrana, John ............................................... 45, 99 Pasupathy, Kalyan ........................................ 34 Patel, Minnie ................................................ 77 Patino-Echeverri, Dalia ................................ 100 Patsavas, Kelly ............................................. 47, 78 Pattyn, Maaike .............................................. 97 Patwardhan, Amol ........................................ 98 Paz, Sandro ................................................... 73 Pazhani, Subramanian .................................. 77, 91 Pazos, Pilar ................................................... 0, 21, 85 Pazour, Jennifer ............................................ 26, 66, 96 Pearce, Bryan ............................................... 64 Peck, George ................................................ 127 Peck, Jordan ................................................. 12 Pedrielli, Giulia ............................................ 87 Peng, Yidong ................................................ 2, 42 Peng, Yuanyuan ........................................... 8 Peñuñuri, Sandra .......................................... 133 Pereira, Valdecy ........................................... 1, 53, 97 Perera, Hemantha ......................................... 46 Perez, Cinthia ............................................... 50 Perez, Eduardo ............................................. 6, 73 Perez, Gustavo .............................................. 72 Perez, Jose Colon ......................................... 116 Perez, Noel ................................................... 20 Pérez Blanco, Ángel ..................................... 11 Perez Coutiño, Manuel Alberto .................... 66 Perez-Garcia, Lorna ..................................... 53 Pérez-Lespier, Lizzette ................................. 101 Perez-Salazar, Ma. del Rosario .................... 91 Perrone, Lindsey ........................................... 15 Perry, Leonard .............................................. 20, 40 Peruchi, Rogerio Santana ............................. 60 Perz, Ann ...................................................... 78 Pesante, Tony ............................................... 131 Petering, Matthew ........................................ 1, 85 Peterman, Robert .......................................... 107 Peters, Megan ............................................... 101

Author Index

Petersen, Chelsie .......................................... 79 Pham, Hoang ............................................... 101 Philip, Nirup ................................................ 91 Philip Higashi, Kenji ................................... 57 Phusavat, Kongkiti (Peter) ........................... 2 Pidd, Michael ............................................... 95 Piechota, Jett ................................................ 6 Pignatiello, Joseph ....................................... 11, 32, 33 Pineda, Ricardo ............................................ 99 Pinheiro de Lima, Edson .............................. 49, 52, 57 Pinto, Harlan ................................................ 119 Piper, Adam ................................................. 39, 56, 78 Pittrof, Kris .................................................. 128 Poggioli, Brian ............................................. 129 Poh, Yeh-Ern ............................................... 22 Pohl, Edward ............................................... 10, 26, 30 Poirier, David .............................................. 125 Polacek, Justin ............................................. 128 Polina, Phani ................................................ 101 Pomales-García, Cristina ............................. 3, 94, 108 Ponce, Leyda ............................................... 5 Pope-Ford, Regina ....................................... 14 PopeFord, Regina ........................................ 100 Popejoy-Sheriff, Devna ............................... 47 Poppa, Kerry ................................................ 68 Poranki, Srikanth ......................................... 59, 67, 902 Porter, David ................................................ 92 Portera, Anthony .......................................... 81 Portugal, Javier ............................................ 133 Postigo, Jorge .............................................. 126 Pouraghabagher, Reza ................................. 114 Poursaeidi, Mohammad H. .......................... 107 Povlotsky, Boris ........................................... 120 Powers, Chris ............................................... 7, 90 Prabhu, Vittal ............................................... 72, 73, 112 Pradhan, Salil ............................................... 66 Prieb, Mark .................................................. 56 Prim, Peter ................................................... 12, 76 Proano, Ruben ............................................. 8, 23, 95 Prokopyev, Oleg .......................................... 75 Proma, Farhana ............................................ 56, 100 Puente-Aguilar, Elva Patricia ...................... 2 Puertas, Monica ........................................... 42 Puga-Bolio, David ....................................... 95 Pulugurta, Saikishore ................................... 99 Punniaraj, Karthy ......................................... 77 Purser, Molly ............................................... 2, 12, 55, 112 Purswell, J.P. ............................................... 131 Qi, Lian ........................................................ 62 Qin, Ruwen .................................................. 35 Qin, Xiaofeng .............................................. 106 Qu, Huashuai ............................................... 55 Qu, Xiuli ...................................................... 42, 103, 103 Quader, Sadia .............................................. 102 Rabadi, Ghaith ............................................. 22, 28 Rabelo, Luis ................................................. 22, 45, 53, 64, 113 Rachamadugu, Ram ..................................... 17 Rafiee, Koosha ............................................. 6 Rahil, Anees ................................................ 6, 24 Rahman, Asheka .......................................... 90 Rahman, Md Mahmudur .............................. 54 Rahman, Mohammad ................................... 59, 70, 81, 85, 88, 90, 104 Rahmandad, Hazhir ..................................... 38 Rahmati, Ali ................................................ 11 Rainwater, Chase ......................................... 10, 30, 54, 81 Rajappa, Gautham ....................................... 62 Rajgopal, Jayant ........................................... 65, 95

Rajpal, Gagan ............................................... 58, 60 Ramachandran, Varun .................................. 3 Ramakrishnan, Sreekanth ............................. 79 Ramamohan, Varun ...................................... 62 Ramirez, Eduardo ......................................... 123 Ramirez, Kasandra ....................................... 76 Ramirez, Magaly .......................................... 36, 96 Ramirez, Nazario .......................................... 53, 58 Ramirez, Victor ............................................ 3 Ramirez-Marquez, Jose ................................ 10, 17, 40, 53, 61 Ramis, Francisco .......................................... 88 Rancourt, Marie-Eve .................................... 98 Ranjan, Vikash ............................................. 46 Rashidi, Eghbal ............................................ 94 Rast, Steffen ................................................. 119 Raul Cermeño - Controller, Raul Cermeño - Controller ...... 117 Ravi, Nikila .................................................. 9 Ravindran, A Ravi ........................................ 91 Ravindran, Ravi ............................................ 25 Ray, Andrew ................................................ 51 Rayas, Victor ................................................ 112 Razzaghi, Talayeh ........................................ 87 Rebovich Jr., George .................................... 71 Reutzel, Edward ........................................... 106 Reyes, Francheska ........................................ 19 Reyes Levalle, Rodrigo ................................ 31 Rhodes, Donna ............................................. 71 Ribeiro, Bianca ............................................. 73 Rico, Florentino ............................................ 103, 109 Rigney, Mia .................................................. 62 Riley, David ................................................. 30 Ritchie, Gilbert ............................................. 22 Rivera, Cesar ................................................ 79 Rivera, Jean Carlos ....................................... 92 Rivera-Nazario, Jean .................................... 99 Rivera-Rodriguez, A. Joy ............................. 29 Rivero, Iris ................................................... 12, 55 Roa Avila, Brenda ........................................ 91 Robbe, Victoria ............................................ 29 Roberts, Stephen ........................................... 2 Roberts, Steven ............................................ 1 Robinson, Anthony ....................................... 66 Robinson, Susan ........................................... 67 Robinson-Bryant, Federica ........................... 126 Rocha, Christian ........................................... 72 Rocha Loures, Eduardo ................................ 98 Rodgers, Mark .............................................. 51, 79 Rodriguez, A. Berenice ................................ 19 Rodríguez, Betzabé ...................................... 5, 56 Rodríguez Merchán, Leidy Johana ............... 16 Roesch, Steven ............................................. 70 Rogers, Jamie ............................................... 41 Rohleder, Thomas ........................................ 75 Rojas Niviayo, Andrea Catalina ................... 131 Rojas-Santiago, Miguel ................................ 66 Rollins, Erika ................................................ 112 Román, Zemuel ............................................ 4 Romeijn, Edwin ............................................ 61 Romich, Andrew .......................................... 81 Romo, David ................................................ 99 Roni, Md ...................................................... 1, 112 Root, Sarah ................................................... 100 Rosa Mendes, Luiz Fernando ....................... 52 Rosario, Catherine ........................................ 94 Rosas, Isaac .................................................. 121 Rosas, Roberto ............................................. 127 Rose, Adam .................................................. 9

Author Index

Rose, Oliver ................................................. 74 Rosenberg, Lawrence .................................. 129 Rosenberger, Jay .......................................... 1, 35, 53,66, 89 Rosselly, Melissa ......................................... 72 Rossetti, Manuel .......................................... 26, 87 Rothrock, Ling ............................................. 72 Rouse, Bill ................................................... 30 Rowe, Paul ................................................... 24 Roy, Debjit .................................................. 66 Rudnicki, Ronald ......................................... 43 Ruiz-Cortes, Yanira ..................................... 2 Ruiz-Torres, Alex ........................................ 73 Rullan, Agustin ............................................ 108 Runger, George ............................................ 62 Rungta, Mukesh ........................................... 96 Ruschin, Mark ............................................. 72 Rusnock, Christina ....................................... 32 Russell, Brent .............................................. 59 Russell, Eugene ........................................... 77 Rust, Tom .................................................... 23 Ryan, Jennifer .............................................. 6, 31 Ryan, Sarah .................................................. 13, 24, 26,33 Rys, Margaret Joanna .................................. 56, 77 Sa-ngasoongsong, Akkarapol ...................... 82 Saavedra, Ivan ............................................. 13 Saavedra, Priscilla ....................................... 3 Sadrsadat, Hadi ............................................ 126 Saedi, Samira ............................................... 95 Sáenz, Juan .................................................. 5, 46 Safari, Arsalan ............................................. 22, 127 Sahin, Asli ................................................... 83 Sainathuni, Bhanuteja .................................. 8 Sala-Diakanda, Serge ................................... 2, 16, 23, 45 Salazar, Fernando ........................................ 91, 92 Saleh, Hani .................................................. 97 Salustri, Filippo ........................................... 37 Samanlioglu, Funda ..................................... 57, 77 Samorani, Michele ....................................... 107 Sampayo, Ernesto ........................................ 129 Samperi, Matt .............................................. 106 Sanders, Janet .............................................. 79, 107 Sanford-Ring, Sue ....................................... 29 Sanil, Gurudatt Bhaskar ............................... 67, 74 Sanjoto, Edi ................................................. 3 Santalov, Vladimir ....................................... 69 Santana-Viera, Victor .................................. 25 Santiago, Eduardo ........................................ 19 Santiago, Eric .............................................. 117 Santiago-Román, Aidsa ............................... 108 Santiváñez, José ........................................... 92 Santos, Ramiro ............................................. 94 Saraswatula, Pranita ..................................... 46 Sarder, MD .................................................. 65, 81, 97, 123 Sarikprueck, Piampoom ............................... 89 Sarkani, Shahram ......................................... 85 Sarkar, Arkopaul .......................................... 74, 112 Sarmiento, Alfonso ...................................... 53 Sattler, Melanie ............................................ 41 Savachkin, Alex ........................................... 73 Sawhney, Rapinder ...................................... 132 Sawhney, Rupy ............................................ 36, 58, 60, 67, 74, ...................................................................... 77, 82, 98, 105 Sawyer, Amy ............................................... 72, 73 Saxena, Rajiv ............................................... 118, 127 Scala, Natalie ............................................... 74, 81 Scavarda, Manuel ........................................ 31 Schafer, Brian .............................................. 75

Schelasin, Roland ......................................... 129 Schell, William ............................................. 36, 63 Schleich, Benjamin ....................................... 45, 59 Schlosser, James ........................................... 9 Schmidt, André-Marcel ................................ 49, 83 Schmidt, Jennifer .......................................... 119 Schmidt, Sean ............................................... 108 Schmidt, Sebastian ....................................... 27 Schmoke, Timothy ....................................... 8 Schneider, Kellie .......................................... 10 Schneider, Todd ........................................... 119 Schruben, Lee ............................................... 87 Schuh, Anna ................................................. 87 Schulte, Helmut ............................................ 49 Schwerha, Diana ........................................... 17, 95 Searcy, Erin .................................................. 112 Sefair, Jorge .................................................. 90 Seijo-Vidal, Roberto ..................................... 2, 53, 93 Sekimoto, Fumi ............................................ 57 Selcuklu, Saltuk ............................................ 51, 79 Selim, Shokri ................................................ 28 Selvaraju, Sathishkumar ............................... 79 Sengul, Irem ................................................. 4 Sengupta, Sankar .......................................... 56 Seok, Hyesung .............................................. 44 Seong, Younho ............................................. 110 Sepulveda, Jose ............................................ 23, 88 Serrano, Sandra ............................................ 119 Serrato, Marco .............................................. 92, 104, 112 Seto, Tom ..................................................... 95 Shafaat, Ali ................................................... 7 Shahabi, Cyrus ............................................. 81 Shaikh, Nazrul .............................................. 105, 110 Shakouri, Mahmoud ..................................... 77 shams, issac .................................................. 51, 109 Sharabiani, Ashkan ....................................... 29, 42 Sharifi, Elham .............................................. 126 Sharkey, Thomas .......................................... 22, 84 Sharma, Nitin ............................................... 15 Shbool, Mohammad ..................................... 26 Shechter, Steven ........................................... 16 Shefts, Tatiana .............................................. 9 Shehab, Randa .............................................. 107 Sherali, Hanif ............................................... 47 Shi, Jianjun ................................................... 6, 47, 96 Shi, Jing ........................................................ 2, 36, 42,62 Shi, Xiaoran .................................................. 36, 55 Shiner, Brian ................................................ 12 Shirwaiker, Rohan ........................................ 12, 30, 55, 61, 102 Shoberg, Tom ............................................... 3 Shortz, Ashley .............................................. 34, 63 Shrake, Scott ................................................ 21 Shrestha, Niva .............................................. 110 Shrivastava, Abhishek .................................. 33 Shuaib, Mohannad ........................................ 51, 61 Sihn, Wilfried ............................................... 17 Silva-Troche, Dhania M. .............................. 56 Sim, Lik ........................................................ 45 Simpson, Joanne ........................................... 29 Simpson, Timothy ........................................ 106 Singareddy, Ravi .......................................... 72 Singh, Manjeet ............................................. 10 Sinha, Ashesh Kumar ................................... 87 Sirikaya, Tasha ............................................. 18, 83 Sisson, Julie .................................................. 46 Sivak-Callcott, Jennifer ................................ 63 Skeens, Mary Ellen ...................................... 115

Author Index

Sluder, John ................................................. 14 Smith, Andrew ............................................. 95 Smith, Brian ................................................. 40, 85 Smith, Cole .................................................. 81,90 Smith, George .............................................. 125 Smith, Joel ................................................... 19 Smith, Philip ................................................ 20 Snowdon, Jane ............................................. 18 Sobek, Durward ........................................... 71 Sojoudi, Somayeh ........................................ 6 Solomon, Marius ......................................... 92 Solorio Magaña, Carlos ............................... 39 Son, Young-Jun ........................................... 25, 68 Song, Jie ...................................................... 62 Song, Jinglu ................................................. 31 Song, Qing ................................................... 43 Song, Sanling ............................................... 6, 69 Songnian, Zhao ............................................ 73 Sonnentag, Jordan ........................................ 27 Sormaz, Dusan ............................................. 29, 99 Soto, Ana Gabriela ...................................... 72 Spangelo, Sara ............................................. 49 Specking, Eric .............................................. 82 Spegal, Christopher ..................................... 74 Spencer, Amy .............................................. 20 Sprehn, Kelly ............................................... 30 Sprock, Timothy .......................................... 31 Srihari, Krishnaswami ................................. 54, 59, 67, 79 St. John, Dia ................................................ 81 Stajsic, Davorin ........................................... 36 Stanfield, Paul .............................................. 17, 60, 72, 95, 110 Stanley, Laura .............................................. 20 Starns, Gloria ............................................... 78 Stearns, Michael .......................................... 42 Steed, Airica ................................................ 115 Steege, Linsey .............................................. 34 Steele, Joseph .............................................. 133 Steen, Joseph ............................................... 133 Steidle, Stephen ........................................... 36 Stein, Martin ................................................ 116, 129, 130 Sterkenburg, Jason ....................................... 34 Stimpson, Matthew ...................................... 27 Stipe, Audrey ............................................... 69 Stone, Danna ................................................ 133 Stone, Robert ............................................... 68 Storch, Richard ............................................ 104 Strawderman, Lesley ................................... 20, 108 Strong, Diane ............................................... 1 Stuart, Mark ................................................. 129 Sturni, Guillaume ......................................... 72 Suárez, Lucinda ........................................... 123 Suárez, Lucinda ........................................... 124, 125 Suárez, Marcelo ........................................... 84 Sudit, Moises ............................................... 5, 30, 43, 66 Sudtachat, Kanchala .................................... 4 Sujitnapitsatham, Sirirat .............................. 9 Sulbaran, Tulio ............................................ 81, 97 Sullivan, Kelly ............................................. 81 Sumaida, Dalia ............................................. 46 Sumter, Alvin .............................................. 130 Sun, Carlos .................................................. 40 Sun, Hongyue .............................................. 105 Sun, Longsheng ........................................... 75, 99 Sun, Xiaocun ............................................... 67 Sun, Yang .................................................... 56 Sun, Yepeng ................................................ 101 Sung, Ji Ye Janet ......................................... 4

Sung, Yi-Shan .............................................. 24 SURIYA, ATIPONG ................................... 92 Surpris, Glenn .............................................. 88 Suzuki, Sadami ............................................. 41 Swain, James ................................................ 15 Süer, Gürsel .................................................. 3, 74,87, 110 Szidarovszky, Ferenc ................................... 13 T T, Narendran ............................................. 77 Taaffe, Kevin ................................................ 11, 15, 22, 23, 56, 69, 87 Tabbakh, Sameer .......................................... 110 Taboada Jimenez, Heidi ............................... 43, 66, 80, 107, 112, 112 Tafoya, Joan ................................................. 125 Taghipour, Sharareh ..................................... 18, 44, 103 Tajik, Waheed .............................................. 59 Takahashi, Paul Y. ....................................... 12 Takeda, Kazuo .............................................. 114 Tan, Chin Hon .............................................. 48 Tan, Dennis .................................................. 120, 133 Tan, Jonathan ............................................... 99 Tan, Zhuo ..................................................... 61, 102 Tancredi, Jeremy .......................................... 130 Tangsucheeva, Rattachut .............................. 112 Tas, Sinan ..................................................... 53 Tatari, Omer ................................................. 89, 91, 96 Tauer, Gregory ............................................. 43 TAVARES PEREIRA, JONATAS ENOC ... 52 Taylor, Courtney .......................................... 56 Taylor, Joyce ................................................ 7, 60, 72, 90 Teasley, Raquel ............................................ 17, 103 Teksan, Zehra Melis ..................................... 75 Temblador, Carmen ...................................... 71, 79 Teng, S. Gary ............................................... 108 Teran, Alejandro ........................................... 10 Tercero-Gómez, Víctor ................................ 11,87, 94 Terpenny, Janis ............................................ 68 Terpenny, Janis ............................................ 83 Testani, Michael ........................................... 79 Thakar, Charuhas ......................................... 23 Thakur, Kaveri ............................................. 77 Thakur, Pooja ............................................... 2 Thal, Jr., Alfred E. ........................................ 109 Thamhain, Hans ........................................... 90 Thanos, Aristotelis E. ................................... 51 Theiss, Brandon ............................................ 84 Thiel, Cassie ................................................. 21 Thiers, George .............................................. 24 Thivierge, Collin .......................................... 8, 57 Thomas, Barrett ............................................ 58 Thomas, Geb ................................................ 18 Thomas, Lisa ................................................ 21 Thompson, Keith .......................................... 27 Thoney, Kristin ............................................ 55 Thong, SY .................................................... 121 Thorn, Brian ................................................. 96 Thorsen, Andreas ......................................... 19 Thyagarajan, Karthik .................................... 100 Tian, Wenmeng ............................................ 104 Tian, Zhigang ............................................... 18, 25 Tolentino Pena, Manuel ............................... 23 Tong, Jingjing .............................................. 101, 103 Tootooni, Mohammad Samie ....................... 112 Topuz, M. Kazim ......................................... 54 Torma, Linda ................................................ 71 Toro, Hector ................................................. 102 Toro Diaz, Hector ......................................... 37 Torres, Giovanni ........................................... 84 Torres, Silmarie ............................................ 3

Author Index

Torres-Jara, Eduardo .................................... 129 Towner, Walter ............................................ 72, 121 Tozanli, Ozden ............................................. 50 Trafalis, Theodore ....................................... 49 Tran, Phuong ............................................... 46 Troy, Philip .................................................. 129 Trudel, John ................................................. 1 Tsao, Hsiao-Shen (Jacob) ............................ 77 Tseng, Bill ................................................... 19, 20, 99, 107 Tsujiuchi, Ryoji ........................................... 48 Tulu, Bengisu .............................................. 1, 9 Tumer, Irem ................................................. 74 Tuohy, Joanne .............................................. 76 Turan, Fikret Korhan ................................... 100 Tuttle, Mark ................................................. 7 Tuzuner, Akiner ........................................... 100 Twomey, Janet ............................................. 104 Udoka, Silvanus ........................................... 39 Ulesich, Morgan .......................................... 28 Uludag, Ilknur .............................................. 8 Umbacía Carvajal, Mónica Marcela ............ 74, 121 Upahdye, Mandar ........................................ 80 Upatising, Benjavan ..................................... 12 Uppal, Ravi .................................................. 7, 72, 90 Upreti, Girish ............................................... 82, 105 Urbanic, Jill ................................................. 10 Usher, John .................................................. 106 Usher, John S ............................................... 82 Uzsoy, Reha ................................................. 3,4, 104 Vaghefi, Seyed A. ........................................ 80 Valdebenito, Victor ..................................... 31, 32 Valenzuela, Diana ........................................ 132 Valenzuela, Jorge ......................................... 46 Valenzuela, Karla ........................................ 35 Vali, Hessamedin ......................................... 1 Van Aken, Eileen ......................................... 40, 47, 49, 52,65, 85, 101 Van Enk, Richard ........................................ 56 Van Goubergen, Dirk ................................... 97,119, 120 Van Landeghem, Hendrik ............................ 71 Van Til, Robert ............................................ 56 Vance, Rodney ............................................. 60 Vardarajan, Vimalesh .................................. 47 Vardeman, Stephen ...................................... 38 Vargas Catalán, Ana Georgina .................... 129 Vargas Salcedo, Gabriel .............................. 91 Vargas-Moreno, Argelia .............................. 2, 88 Varghese, Vijith ........................................... 26 Vasheghani Farahani, Ehsan ........................ 125 Vazquez Reyes, Sodel ................................. 66 Vega, Adan .................................................. 99 Vejar, Set ..................................................... 93 Velandia Sarmiento, Luisa Carolina 77 Velazquez, Maria ......................................... 16 Velez, Bienvenido ....................................... 108 Velez-Gallego, Mario C. .............................. 66 Venegas Mendez, Juan ................................ 107 Venkatadri, Uday ......................................... 47 Ventresca, Mario ......................................... 69 Ventura, José ............................................... 28, 77 Ventura, José ............................................... 97 Ventura, Marta ............................................. 86 Verduzco-Garza, Teresa .............................. 121 Verma, Alok ................................................ 72 Vidyanti, Irene ............................................. 96 Vidyarthi, Navneet ....................................... 100 Vigo, Alejandro ........................................... 33 Vila-Parrish, Ana ......................................... 50

Villa Cisneros, Juan Luis .............................. 66 Villa Marulanda, Marcela ............................. 28 Village, Judy ................................................ 37, 70 Villanueva, Alirio ......................................... 130 Villanueva, Jesus .......................................... 83 Villanueva-Guerra, Elena ............................. 87, 94 Villarreal, Bernardo ...................................... 72, 121, 122, 132 Villarreal-Elizondo, Bernardo ...................... 132 Villarreal-Marroquín, María G. .................... 5, 19 Vincenzi, Dennis .......................................... 45, 88 Viraldo, Jacob .............................................. 7 Virani, Shamsnaz ......................................... 60, 112 Vivek, Samuel .............................................. 54 Vo, Long ...................................................... 51 Wade, Robert ................................................ 89 WALIULLAH, MD ..................................... 39 Wall, Richard ............................................... 88 Wallace, William A. ..................................... 3, 32 Wan, Hung-da .............................................. 59, 64, 69 Wan, Wei ..................................................... 8 Wang, ChangFeng ........................................ 8 Wang, Chung-Hsiao ..................................... 22 Wang, Hao ................................................... 29 Wang, Honggang .......................................... 27, 48 Wang, Jianhui ............................................... 46, 63 Wang, Jihan .................................................. 9, 41 Wang, Kaibo ................................................ 105 Wang, Lizhi .................................................. 26 Wang, Pingfeng ............................................ 13, 45, 77 Wang, Shengyong ........................................ 7, 14, 60, 72, 90, 90 Wang, Steve Hsueh-Ming ............................ 28, 41 Wang, Xiaoqing ........................................... 31 Wang, Zequn ................................................ 77 Wanko, Patrick ............................................. 60, 72, 95 Wardell, Clarence ......................................... 67 Warsing, Don ............................................... 50 Wasil, Edward .............................................. 69 Watkins, Ben ................................................ 98 Watts, Bradley V. ......................................... 12 Wazzan, Wajdi ............................................. 89 Weber, Rachel .............................................. 20, 21 Webster, Caroline ......................................... 76 Wei, Chuang ................................................. 32 Wei, Xiupeng ............................................... 110 Weigel, Annalisa .......................................... 34 Weisenborn, Gregory ................................... 109 Weiss, Rebecca ............................................ 56 Welburn, Jonathan ........................................ 17 Welch, Richard ............................................. 73 Weldu, Yibrah .............................................. 84 Welke, Helmut ............................................. 128 Werner, Andreas ........................................... 27 Wernz, Christian ........................................... 2 West, Harvey ................................................ 76 Wheeler, Stephanie ....................................... 102 White, Chelsea ............................................. 17 White, Edward .............................................. 76 White, John .................................................. 27 Wick, Lisa .................................................... 29 Wigal, Cecelia .............................................. 20 Wilck, Joseph ............................................... 23, 35, 62 Wilhelm, Wilbert .......................................... 102 Willemain, Thomas ...................................... 76 William, Samuel ........................................... 132 Williams, Ben ............................................... 114 Wilson, Crystal ............................................. 100 Wilson, James .............................................. 44, 55, 93

Author Index

Wilson, Shellyanne ...................................... 9 Wirthlin, J. Robert ....................................... 59 Wise, Scott ................................................... 127 Wiyor, Hanniebey ........................................ 100 Woltag, Henry ............................................. 96 Wong-Cinco, Allison Y ............................... 56 Wongdhamma, Woranat .............................. 82 Wood, Sarah ................................................ 21 Woodward-Hagg, Heather ........................... 119 Wooten, Russell ........................................... 32 Worger, Danielle ......................................... 59 Wu, Chih-Hang ............................................ 73, 107 Wu, Jing ....................................................... 20 Wu, Shinyi ................................................... 36, 80, 96 Wu, Teresa ................................................... 59 Wu, Wentao ................................................. 104 Wyatt, L. James ........................................... 109 Wysk, Richard ............................................. 12, 30, 45, 55, 68, 76, 102 Xanthopoulos, Petros ................................... 87 Xia, Mingjun ................................................ 8 Xiang, Yisha ................................................ 105 Xiao, Guoxian .............................................. 83 Xie, Wei ....................................................... 26 Xie, Xiaolei .................................................. 29 Xie, Zhixue .................................................. 1, 31 Xu, Dong ..................................................... 68 Xu, Guangyang ............................................ 15 Xu, Huayu .................................................... 31 Xu, Jie .......................................................... 55 Xu, Li ........................................................... 88 Xu, Liang ..................................................... 13 Xu, Min ....................................................... 29 Xu, Rui ........................................................ 23, 28, 37 Xu, Xu ......................................................... 14 Yadav, Om Prakash ..................................... 112 Yahav, Inbal ................................................ 69 YAÑEZ-MENDIOLA, JAVIER .................. 93 Yang, Bo ...................................................... 23 Yang, Eric .................................................... 40 Yang, Feng .................................................. 55 Yang, Hui .................................................... 72 Yang, Kai ..................................................... 9, 41, 51, 99, 109 Yang, Putai .................................................. 12 Yang, Qingyu .............................................. 13, 18, 26 Yang, Youngchul ......................................... 8 Yang, Zhou .................................................. 62 Yao, Qingzhu ............................................... 47 Yao, Tao ...................................................... 19 Yates, Justin ................................................. 90 Yauch, Charlene .......................................... 27, 47 Yazdani Sabouni, M.T. ................................ 60 yazhuo, Liu .................................................. 109 Yazici, Hulya ............................................... 108, 113 Yazmani, Garcia .......................................... 93 Yeong, Li-Qian ............................................ 28 Yerasi, Swaroop ........................................... 68 Yi, Shan-Ru ................................................. 19 Yie Pinedo, Ruben Dario ............................. 66 Yigit, Vecihi ................................................ 105 Yih, Yuehwern ............................................. 12, 62 Yildirim, M. Bayram ................................... 1, 14, 46 Yim, Rachel ................................................. 74 YOO, ARM ................................................. 37 Yoo, James .................................................. 55, 76 Yoo, John Jung-Woon ................................. 11 Yoon, Hyun-Shik ......................................... 18 Yoon, Sang Won .......................................... 27, 45, 54, 59, 67

Yoshimoto, Kazuho ...................................... 57 Young, Kaysha ............................................. 20 Young, Robert .............................................. 112 Yu, Yin ......................................................... 61 Yu, Zhongwei ............................................... 70 Yuan, Tao ..................................................... 69 Yucel, Ahmet ............................................... 102 Yuen, Ming .................................................. 87 Yuzgec, Evrim .............................................. 31, 45, 48, 103 Zaarour, Nizar .............................................. 92 Zabinsky, Zelda ............................................ 9, 29 Zaghian, Maryam ......................................... 65 Zakerifar, Mehdi ........................................... 101 Zancul, Eduardo ........................................... 84 Zandieh, Mostafa .......................................... 94 Zapata, Felix ................................................. 108 Zapata, Luis .................................................. 84 Zayas-Caban, Gabriel ................................... 37 Zayas-Caban, Teresa .................................... 61 Zayas-Castro, Jose Luis ................................ 42, 109 Zeisset, Michelle .......................................... 32 Zelaya, Melissa ............................................ 34, 50 Zeng, Li ........................................................ 35, 53 Zeng, Zexian ................................................ 29 Zhang, Gewei ............................................... 98 Zhang, Guifu ................................................ 97 Zhang, Hao ................................................... 109 Zhang, Hui ................................................... 2, 38 Zhang, Jinghe ............................................... 59, 902 Zhang, Jun .................................................... 23, 36, 42 Zhang, Li ...................................................... 25 Zhang, Liang ................................................ 98 Zhang, Linmiao ............................................ 33 Zhang, Min ................................................... 57 Zhang, Muhong ............................................ 63 Zhang, Nailong ............................................. 13, 18, 26 Zhang, Qiong ................................................ 89 Zhang, Shengfan ........................................... 44, 54 Zhang, Xiaodong .......................................... 65 Zhang, Xinhui .............................................. 8 zhang, yahui ................................................. 25, 55, 61 Zhang, Zirun ................................................. 53 Zhao, Cong ................................................... 98 Zhao, Fuqiong .............................................. 25 Zhao, Wei ..................................................... 87 Zhao, Zhaoxia .............................................. 23, 37, 60 Zheng, Bichen .............................................. 27, 59 Zheng, Jun .................................................... 107 Zheng, Li ...................................................... 1, 31 Zheng, Liyu .................................................. 68 Zheng, Qipeng .............................................. 6, 22, 24, 26, 88 Zhong, Xiang ................................................ 29, 62 Zhou, Chen ................................................... 33 Zhou, Lei ...................................................... 83 Zhou, Shengchao .......................................... 23, 28, 37 Zhou, Yuan ................................................... 80 Zhou, Zhi ...................................................... 20 Zhou, Zhili ................................................... 11, 62 Zhu, Jianmin ................................................. 80 Zhu, Wanshan .............................................. 31 Zhu, Xiaojuan ............................................... 67, 74 Zhu, Xiaoyan ................................................ 23, 37, 47, 60 Zhu, Yada ..................................................... 19, 37 Zhu, Yanshen ............................................... 45 Zhuang, Jun .................................................. 11, 22, 96 Zinouri, Nazanin ........................................... 48 Zitzumbo, Roberto ....................................... 110

Author Index

Zokaei, Keivan ............................................. 65 Zokaei, Keivan ............................................. 116 Zokaei, Keivan ............................................. 119, 122 Zreiqat, Majed ............................................. 63 Zrnic, Dusan ................................................ 97 Zu, Ling ....................................................... 15 Zugelder, Thomas ........................................ 83

Author Index

Abab, Majid .................................................. 126, 127, 128, 129 ....................................................................... 130, 131, 132 Acosta-Amado, Rolando .............................. 28 Afify, Ashraf ................................................ 4 Aghazadeh, Fereydoun ................................. 77 Agustiady, Tina ............................................ 119, 120, 121, 123, 124 ....................................................................... 125, 126, 128, 133 Ahram, Tareq ............................................... 38 Ajorlou, Saeede ............................................ 109 Akyeampong, Joseph .................................... 100 Al Theeb, Nader ........................................... 24 Al-Turki, Umar ............................................. 43 Alamri, Amr ................................................. 83 Ali, Ahad ....................................................... 8 Ali, Islam ...................................................... 11 Alvarez, Humberto ....................................... 104 Angelidis, Evangelos .................................... 74 Askin, Ronald ............................................... 47, 57 Attah, Al ....................................................... 89 Badar, M. Affan ........................................... 82 Badurdeen, Fazleena .................................... 15 Bai, Lihui ...................................................... 15 Bakhsh, Ahmed ............................................ 79 Barker, Kash .................................................. 16 Barnes, Sean ................................................. 69 Bayraksan, Guzin ......................................... 110 Bedoya-Valencia, Leonardo ......................... 99 Ben-Arieh, David ......................................... 73 Bender, Gloria .............................................. 125 BenJebara, Marouen ..................................... 17 Berg, Bjorn ................................................... 54 Berry, Diana ................................................. 115, 116, 118, ....................................................................... 119, 120, 122 Bhat, Sanket .................................................. 86 Bishop, George ............................................. 119, 120, 121 ....................................................................... 122, 123, 125 Buch, Kuang-Hao ......................................... 44 Bukkapatnam, Satish .................................... 82 Burnett, Gabriel ............................................ 5 Bursic, Karen ................................................ 63 Bush, Curtis .................................................. 115, 116, 118, ....................................................................... 119, 120, 122 Byrne, Haleh ................................................. 117, 118, 119, 120, 121 ....................................................................... 122, 123, 124, 125, 126 ....................................................................... 127, 128, 129, 131, 132 ....................................................................... 133 Cabrera-Ríos, Mauricio ................................ 19 Caldwell, Barrett .......................................... 94 Calvo-Amodio, Javier .................................. 14 Capan, Muge ................................................ 75 Castaing, Jeremy .......................................... 48, 82 Celik, Nurcin ................................................ 51 Celikbilek, Can ............................................. 87, 95 Centeno, Grisselle ........................................ 103 Chang, Chia-Jung ......................................... 104 Chase, Bradley ............................................. 40 Chen, Huaping .............................................. 37 Chen, Yihsu .................................................. 33 Chicken, Eric ................................................ 11 Claudio, David ............................................. 16, 41, 71, 73 Cloutier, Robert ............................................ 23, 30, 54, 60 Cohn, Amy ................................................... 48, 82 Componation, Paul ....................................... 89 Contreras, Homero H. .................................. 91 Contreras Pulido, Homero Héctor ................ 2 Cope, Dayana ............................................... 112 Coperich, Katie ............................................. 114, 116, 117

...................................................................... 120, 121, 128 Cormier, Denis ............................................. 68 Costa, Janaina ............................................... 78 Cristobal-Vazquez, Isidro M. ....................... 9 Cudney, Elizabeth ........................................ 35, 78 Damodaran, Purushothaman ......................... 66 Daskin, Mark ................................................ 49 Davila, Saylisse ............................................ 108 Davis, Dorian ............................................... 51 Davis, Lauren ............................................... 17 Deb, Ashok ................................................... 36 Desai, Salil ................................................... 32 Deschamps, Fernando .................................. 49 Diaz, Maria Carolina .................................... 123, 127, 130, ...................................................................... 131, 132, 133 Dixon, Gene ................................................. 64 Dong, Jingyan .............................................. 32 Dora, Manoj ................................................. 97 Downing, Craig ............................................ 40 Drzymalski, Julie .......................................... 99 Elliott, Richard ............................................. 10, 49 Elsayed, Elsayed ........................................... 25 Elshennawy, Ahmad ..................................... 2 Elwany, Alaa ................................................ 125, 126, 127, 128, ...................................................................... 129, 130, 131, 133 Espiritu Nolasco, Jose Francisco .................. 59, 107 Falan, Sharie ................................................. 80 Farris, Jennifer .............................................. 34 Fasanya, Bankole ......................................... 46 Fearon, Micheal ............................................ 109 Forbes, Lincoln ............................................. 114, 115, 116, ...................................................................... 117, 118, 155 Fu, Yong ....................................................... 63 Ganapathy, Subhashini ................................. 7 Garcia-Diaz, Alberto ..................................... 22 Gardner, George ........................................... 114, 115, 116 ...................................................................... 117, 118, 155 Geiger, Christopher ...................................... 38 Girimurugan, Senthil Balaji .......................... 32 Glover, Wiljeana .......................................... 71, 85 Gnaneswaran, Vettrivel ................................ 108, 112 Goethals, Paul .............................................. 29, 66, 73, 81 Gómez Montoya, Diego José ....................... 8 González, Miguel ......................................... 3, 43 Gouvea da Costa, Sergio E. .......................... 49 Graham, Andrea ........................................... 41 Graham, Larry .............................................. 125, 126, 127, 128 ...................................................................... 129, 130, 131, 133 Grasman, Scott ............................................. 41 Greene, Christopher ..................................... 106 Griffin, Paul .................................................. 72 Gupta, Aman ................................................ 105, 33 Gutman, Alex ............................................... 76 Güney, Evren ................................................ 72 Hamidi, Maryam .......................................... 13 Han, Ying ..................................................... 112 Hartman, Joseph ........................................... 35 Haynes, Mark ............................................... 107 Heragu, Sunderesh ....................................... 101 Hernandez, Jose ............................................ 114, 122, 124, 125 Herrmann, Jeffrey ......................................... 12, 34, 55, 75, 8, 93 Heyde Montague, Brandy ............................. 126, 128, 129 Horn, Timothy .............................................. 76 Hostetler, Seth .............................................. 102, 109 Hu, Mengqi .................................................. 20, 94 Huang, Yunchen ........................................... 20 Hutchison, Kenneth ...................................... 76

Index of Chairs

Jackman, John .............................................. 78 Jannone, Mark .............................................. 117, 118, 121, 122, 123 ....................................................................... 124, 125, 126, 127, 128 ....................................................................... 129, 131, 132, 133 Javadpour, Leili ............................................ 98 Jha, Krishna .................................................. 126, 128, 129 Jiang, Steven ................................................. 70 Johnson, Andrew .......................................... 47 Johnson, Sharon ........................................... 1, 20 Jones, Erick .................................................. 102 Judd, Robert .................................................. 10 Karwowski, Waldemar ................................. 61 Keathley, Heather ......................................... 52 Khazaeli, Mehdi ........................................... 112 Kim, Namhun ............................................... 37 King, Russell E. ............................................ 50 Klein, Cerry .................................................. 70 Knapp, Gerald M. ......................................... 98, 106 Ko, Hoo Sang ............................................... 44, 54 Kong, Dongjoon ........................................... 119, 120, 121, 122 ....................................................................... 123, 125, 17 Konur, Dincer ............................................... 75 Kovach, Jamison .......................................... 6 Kuhl, Michael ............................................... 23 Kulturel-Konak, Sadan ................................. 14, 85 Lan, Tian ...................................................... 30 Landsberger, Michael ................................... 21 Lawley, Mark ............................................... 36 Le, Trung ...................................................... 82 Leaven, Laquanda ........................................ 42 Lee, Changhyeok .......................................... 6 Lee, Seokcheon ............................................ 114, 116, 117 Letens, Geert ................................................ 65 Leu, Paul ...................................................... 25 Li, Juan ......................................................... 6 Li, Xueping .................................................. 23, 62 Li, Zhaojun ................................................... 4 Li, Zhiguo ..................................................... 19 Liang, Zhe .................................................... 54 Liao, Haitao .................................................. 13 Lim, Gino ..................................................... 32, 38, 45, 65, 96 Liu, Andrew ................................................. 24 Liu, Dahai ..................................................... 45 Liu, Jian ........................................................ 114, 122, 124 ....................................................................... 125, 14, 62 Logendran, Rasaratnam ................................ 60 Loggins, Ryan .............................................. 3 Long, Suzanna .............................................. 40, 108 Maalouf, Maher ............................................ 97 Mallum, Faisal .............................................. 81 Manogharan, Guha Prasanna ........................ 45 Marín, Rosaurelis ......................................... 93 Martins, Roberto Antonio ............................. 52 Masel, Dale .................................................. 64 Mata, Fernando ............................................. 120, 121, 122, 123, 124 ....................................................................... 125, 126, 127, 128, 129 ....................................................................... 130, 131, 132, 133 Mayorga, Maria ............................................ 102, 37 Mazur, Lukasz .............................................. 34 McCreery, John ............................................ 7 Medal, Hugh ................................................. 22, 90 Medina, Lourdes A. ...................................... 19, 5 Medina-Borja, Alexandra ............................. 40 Melton, Brittany ........................................... 58, 95 Mewborn, Amanda ....................................... 114, 115, 117, 118, 119 ....................................................................... 129, 130, 131, 132, 133 Milburn, Ashlea ............................................ 61, 67

Min, K. Jo ...................................................... 80, 84 Moreno, Olivia ............................................. 66 Mousavian, Seyedamirabbas ........................ 46 Murray, Susan .............................................. 74 Nachtmann, Heather ..................................... 101 Naderkhani Zarrin Ghabaei, Farnoosh ......... 38 Nagi, Rakesh ................................................ 57 Nahmens, Isabelina ...................................... 84 Nanduri, Vishnu ........................................... 13 Negron, Felix ................................................ 117 Nembhard, David ......................................... 58 Neyens, David .............................................. 67 Nicholls, Gillian ........................................... 27, 52 Nimbarte, Ashish .......................................... 63 Noble, James ................................................ 15, 21, 69, 87 Noori, Mehdi ................................................ 91 Norman, Bryan ............................................. 65, 95 Norouzzadeh, Shaghayegh ........................... 67 Occeña, Luis ................................................. 18 Okudan, Gul ................................................. 52 Otieno, Wilkistar .......................................... 39 Ozbolat, Ibrahim Tarik ................................. 12 Ozelkan, Ertunga .......................................... 110 Ozkaynak, Mustafa ....................................... 9, 86 Pacheco, Paola .............................................. 62 Parikh, Pratik ................................................ 8 Paris, Joe ...................................................... 114, 116, 117, 119 ...................................................................... 120, 121, 123, 124 Parson, Carl .................................................. 59 Pavan, Danny ............................................... 114, 115, 116 Pazhani, Subramanian .................................. 96 Pazos, Pilar ................................................... 21 Pazour, Jennifer ............................................ 26 Peck, Jordan ................................................. 12, 35, 80 Pereira, Valdecy ........................................... 52 Perez, Noel ................................................... 19 Petering, Matthew ........................................ 1 Piper, Adam .................................................. 39 Porter, David ................................................ 92 Portillo, Rodolfo ........................................... 31 Puertas, Monica ............................................ 42 Purser, Molly ................................................ 61 Qu, Xiuli ....................................................... 103 Rafiee, Koosha ............................................. 69 Rainwater, Chase .......................................... 10, 30 Ramirez, Nazario .......................................... 53 Ramirez-Marquez, Jose ................................ 53 Rancourt, Marie-Eve .................................... 97 Rivera-Rodriguez, A. Joy ............................. 29 Rosenberger, Jay .......................................... 88 Rusnock, Christina ....................................... 32 Rust, Tom ..................................................... 29, 86 Ryan, Jennifer .............................................. 31 Ryan, Sarah .................................................. 13, 26, 33 Saavedra, Ivan .............................................. 13 Sáenz, Juan ................................................... 5 Safari, Arsalan ............................................... 64 Samanlioglu, Funda ...................................... 57, 77 Sanders, Janet ............................................... 79 Santiváñez, José ........................................... 92 Sarder, MD ................................................... 46, 123, 127, 130, 131 ...................................................................... 132, 133 Schell, William ............................................. 36 Schuh, Anna ................................................. 87 Seijo-Vidal, Roberto ..................................... 1 Sengul, Irem ................................................. 4 Serrato, Marco .............................................. 91, 112

Index of Chairs

Shaikh, Nazrul .............................................. 105 Sharkey, Thomas .......................................... 84 Shechter, Steven ........................................... 16 Shefts, Tatiana .............................................. 9 Shehab, Randa .............................................. 107 Shi, Jianjun ................................................... 68 Shi, Jing ........................................................ 2 Shirwaiker, Rohan ........................................ 55, 61 Skeens, Mary Ellen ....................................... 114, 115, 117, 118, 119 ....................................................................... 129, 130, 131, 132, 133 Son, Young-Jun ............................................ 25 Song, Sanling ................................................ 69 Sudit, Moises ................................................ 42 Sullivan, Kelly .............................................. 81 Sung, Yi-Shan .............................................. 24 Süer, Gürsel .................................................. 3, 74 Taaffe, Kevin ................................................ 11, 22 Taboada Jimenez, Heidi ............................... 43 Tan, Chin Hon .............................................. 48 Terpenny, Janis ............................................. 68 Testani, Michael ........................................... 79 Thamhain, Hans ........................................... 90 Thiruvengada, Hari ....................................... 114, 116, 117 Thomas, Geb ................................................ 18 Tian, Zhigang ............................................... 18, 44 Tuzuner, Akiner ........................................... 100 Uppal, Ravi .................................................. 7 Usher, John ................................................... 106 Uzsoy, Reha ................................................. 104 Valdebenito, Victor ...................................... 31 Van Aken, Eileen ......................................... 101 Van Landeghem, Hendrik ............................ 71 Ventura, José ................................................ 28 Ventura, José ................................................ 96 Verma, Alok ................................................. 72 Vidyarthi, Navneet ....................................... 100 Villarreal, Bernardo ...................................... 120, 121, 122, 123, 124 ....................................................................... 125, 126, 127, 128, 129 ....................................................................... 130, 131, 132, 133 Wagner, Joan ................................................ 114, 116, 117 ....................................................................... 120, 121, 128 Wan, Hung-da .............................................. 64 Wan, Wei ...................................................... 8 Wang, Honggang .......................................... 48 Wang, Lizhi .................................................. 26 Wang, Pingfeng ............................................ 45 Wang, Shengyong ........................................ 90 Wang, Xiaoqing ........................................... 31 Wei, Xiupeng ............................................... 110 White, John ................................................... 27 Whitman, Lawrence ..................................... 85 Williams, Ed .................................................. 114, 115, 116 Xu, Jie .......................................................... 55 Xu, Rui ......................................................... 23 Yang, Qingyu ............................................... 25 Yauch, Charlene ........................................... 27, 47 Yazici, Hulya ................................................ 113 Yoon, Sang Won .......................................... 27 Young, Robert .............................................. 112 Zhang, Gewei ............................................... 98 Zhang, Liang ................................................ 98 Zheng, Bichen .............................................. 58 Zhou, Lei ...................................................... 83 Zhu, Xiaoyan ................................................ 60 Zugelder, Thomas ......................................... 83

Index of Chairs

A3 ................................................................ 122 A4 ................................................................ 121 5 ................................................................... 46 A5 ................................................................ 123 6 ................................................................... 12 A6 ................................................................ 124 7 .................................................................... 61 A7 ................................................................ 115 8 ................................................................... 64 A10 .............................................................. 116 11 ................................................................. 106 12 ................................................................. 54 A12 .............................................................. 114 13 ................................................................. 36 A13 .............................................................. 127 14 ................................................................. 55 A14 .............................................................. 133 15 ................................................................. 96 A15 .............................................................. 118 16 ................................................................. 72 A16 .............................................................. 119 18 ................................................................. 79 A18 .............................................................. 116 19 ................................................................. 55 A19 .............................................................. 117 20 ................................................................. 2 A22 .............................................................. 129 23 ................................................................. 29 A23 .............................................................. 120 24 ................................................................. 74 27 ................................................................. 34 A28 .............................................................. 130 A29 .............................................................. 117 30 ................................................................. 28 A30 .............................................................. 114 31 ................................................................. 29 A31 .............................................................. 125 A32 .............................................................. 132 34 ................................................................. 59 A34 .............................................................. 129 35 ................................................................. 29 A35 .............................................................. 124 38 ................................................................. 12 39 ................................................................. 12 A39 .............................................................. 130 A40 .............................................................. 115 A42 .............................................................. 128 43 ................................................................. 54 44 ................................................................. 44 45 ................................................................. 44 A45 .............................................................. 114 46 ................................................................. 19 A47 .............................................................. 125 A48 .............................................................. 123 49 ................................................................. 47 A49 .............................................................. 123 50 ................................................................. 78 A50 .............................................................. 125 51 ................................................................. 40 A51 .............................................................. 128 52 ................................................................. 40 53 ................................................................. 40 A53 .............................................................. 129 55 ................................................................. 17 56 ................................................................. 27 A56 .............................................................. 120 A57 .............................................................. 122

A58 ............................................................. 122 59 ................................................................ 2 A60 ............................................................. 124 A61 ............................................................. 133 63 ................................................................ 41 A63 ............................................................. 119 64 ................................................................ 9 65 ................................................................ 33 A65 ............................................................. 127 66 ................................................................ 105 A66 ............................................................. 121 67 ................................................................ 7 68 ................................................................ 106 69 ................................................................ 112 70 ................................................................ 54 A70 ............................................................. 127 71 ................................................................ 18 73 ................................................................ 12 A73 ............................................................. 120 74 ................................................................ 56 A74 ............................................................. 121 75 ................................................................ 86 A75 ............................................................. 114 76 ................................................................ 87 A76 ............................................................. 133 77 ................................................................ 69 A77 ............................................................. 124 78 ................................................................ 87 79 ................................................................ 87 80 ................................................................ 69 A80 ............................................................. 127 81 ................................................................ 32 A81 ............................................................. 128 A83 ............................................................. 120 84 ................................................................ 58 A84 ............................................................. 126 A85 ............................................................. 127 A86 ............................................................. 130 87 ................................................................ 80 A87 ............................................................. 125 88 ................................................................ 34 A88 ............................................................. 122 89 ................................................................ 26 A89 ............................................................. 133 92 ................................................................ 13 A92 ............................................................. 131 93 ................................................................ 105 A93 ............................................................. 132 94 ................................................................ 66 A94 ............................................................. 118 95 ................................................................ 83 97 ................................................................ 75 A97 ............................................................. 121 98 ................................................................ 10 99 ................................................................ 10 A99 ............................................................. 114 100 .............................................................. 51 A100 ........................................................... 116 101 .............................................................. 51 A102 ........................................................... 124 103 .............................................................. 37 103 .............................................................. 60 104 .............................................................. 105 A104 ........................................................... 133 105 .............................................................. 60 108 .............................................................. 82 A108 ........................................................... 129

Abstract Index

109 ............................................................... 51 A109 ............................................................ 127 A110 ............................................................ 120 111 ............................................................... 66 A111 ............................................................ 120 112 ............................................................... 15 A112 ............................................................ 115 113 ............................................................... 21 A113 ............................................................ 119 114 ............................................................... 15 A114 ............................................................ 126 115 ............................................................... 70 A115 ............................................................ 118 117 ............................................................... 71 A117 ............................................................ 121 119 ............................................................... 75 A119 ............................................................ 133 A120 ............................................................ 133 121 ............................................................... 92 122 ............................................................... 92 123 ............................................................... 92 124 ............................................................... 92 A124 ............................................................ 114 125 ............................................................... 68 A125 ............................................................ 132 A126 ............................................................ 121 A129 ............................................................ 131 130 ............................................................... 34 A131 ............................................................ 126 134 ............................................................... 60 A134 ............................................................ 118 135 ............................................................... 60 A135 ............................................................ 130 A140 ............................................................ 126 A141 ............................................................ 119 142 ............................................................... 105 A142 ............................................................ 118 A145 ............................................................ 131 A147 ............................................................ 129 A149 ............................................................ 119 A151 ............................................................ 128 152 ............................................................... 33 A152 ............................................................ 132 154 ............................................................... 81 A154 ............................................................ 123 155 ............................................................... 14 156 ............................................................... 77 A156 ............................................................ 124 157 ............................................................... 69 A157 ............................................................ 125 158 ............................................................... 51 A159 ............................................................ 123 160 ............................................................... 33 A160 ............................................................ 125 161 ............................................................... 7 162 ............................................................... 45 A163 ............................................................ 124 164 ............................................................... 31 165 ............................................................... 31 166 ............................................................... 75 A166 ............................................................ 118 167 ............................................................... 23 A167 ............................................................ 118 168 ............................................................... 24 A168 ............................................................ 115 169 ............................................................... 11 A169 ............................................................ 131

A170 ........................................................... 131 A171 ........................................................... 119 171 .............................................................. 902 172 .............................................................. 76 A172 ........................................................... 129 173 .............................................................. 97 A173 ........................................................... 131 174 .............................................................. 82 A174 ........................................................... 129 175 .............................................................. 54 A175 ........................................................... 117 176 .............................................................. 64 177 .............................................................. 15 A177 ........................................................... 122 A178 ........................................................... 126 179 .............................................................. 79 A179 ........................................................... 132 180 .............................................................. 85 A181 ........................................................... 130 A182 ........................................................... 126 A183 ........................................................... 131 A184 ........................................................... 117 185 .............................................................. 64 A185 ........................................................... 123 A186 ........................................................... 116 A191 ........................................................... 128 192 .............................................................. 17 A192 ........................................................... 122 A193 ........................................................... 126 A194 ........................................................... 123 195 .............................................................. 25 A195 ........................................................... 115 196 .............................................................. 6 197 .............................................................. 96 A197 ........................................................... 132 199 .............................................................. 1 200 .............................................................. 18 A201 ........................................................... 130 A202 ........................................................... 116 203 .............................................................. 45 A203 ........................................................... 130 204 .............................................................. 88 A204 ........................................................... 127 205 .............................................................. 61 A205 ........................................................... 122 206 .............................................................. 61 207 .............................................................. 25 208 .............................................................. 67 209 .............................................................. 67 210 .............................................................. 18 211 .............................................................. 71 212 .............................................................. 71 A212 ........................................................... 117 213 .............................................................. 71 214 .............................................................. 73 A214 ........................................................... 120 215 .............................................................. 73 A215 ........................................................... 128 216 .............................................................. 18 A216 ........................................................... 117 A217 ........................................................... 115 218 .............................................................. 31 A218 ........................................................... 128 219 .............................................................. 71 A219 ........................................................... 121 220 .............................................................. 73 A220 ........................................................... 132

Abstract Index

A221 ............................................................ 114 A222 ............................................................ 155 224 ............................................................... 14 225 ............................................................... 73 A225 ............................................................ 116 226 ............................................................... 5 A226 ............................................................ 117 A227 ............................................................ 125 228 ............................................................... 5 A228 ............................................................ 116 229 ............................................................... 95 230 ............................................................... 68 231 ............................................................... 77 232 ............................................................... 68 233 ............................................................... 63 234 ............................................................... 44 235 ............................................................... 22 236 ............................................................... 44 238 ............................................................... 44 239 ............................................................... 97 240 ............................................................... 64 242 ............................................................... 63 243 ............................................................... 63 246 ............................................................... 6 247 ............................................................... 91 248 ............................................................... 9 249 ............................................................... 7 250 ............................................................... 24 251 ............................................................... 81 252 ............................................................... 31 253 ............................................................... 28 254 ............................................................... 84 256 ............................................................... 68 257 ............................................................... 97 258 ............................................................... 11 259 ............................................................... 22 260 ............................................................... 69 261 ............................................................... 23 263 ............................................................... 44 264 ............................................................... 62 265 ............................................................... 86 266 ............................................................... 19 267 ............................................................... 100 268 ............................................................... 73 269 ............................................................... 11 271 ............................................................... 81 272 ............................................................... 81 273 ............................................................... 32 274 ............................................................... 11 275 ............................................................... 101 276 ............................................................... 47 278 ............................................................... 21 279 ............................................................... 32 281 ............................................................... 32 282 ............................................................... 9 285 ............................................................... 65 288 ............................................................... 56 289 ............................................................... 73 293 ............................................................... 24 294 ............................................................... 24 295 ............................................................... 68 296 ............................................................... 100 297 ............................................................... 30 298 ............................................................... 47 300 ............................................................... 55 302 ............................................................... 84 303 ............................................................... 24

304 .............................................................. 24 307 .............................................................. 8 308 .............................................................. 15 310 .............................................................. 17 311 .............................................................. 17 312 .............................................................. 71 313 .............................................................. 85 314 .............................................................. 21 314 .............................................................. 85 315 .............................................................. 85 316 .............................................................. 50 317 .............................................................. 21 318 .............................................................. 77 319 .............................................................. 57 320 .............................................................. 27 322 .............................................................. 61 323 .............................................................. 96 324 ............................................................... 33 326 .............................................................. 68 327 .............................................................. 22 328 .............................................................. 109 329 .............................................................. 37 334 .............................................................. 26 335 .............................................................. 26 338 .............................................................. 3 339 .............................................................. 108 340 .............................................................. 108 342 .............................................................. 108 344 .............................................................. 100 345 .............................................................. 64 346 .............................................................. 113 347 .............................................................. 52 348 .............................................................. 48 352 .............................................................. 87 353 .............................................................. 77 354 .............................................................. 22 355 .............................................................. 75 356 .............................................................. 84 358 .............................................................. 72 359 .............................................................. 64 360 .............................................................. 82 363 .............................................................. 52 364 .............................................................. 49 366 .............................................................. 1 368 .............................................................. 13 369 .............................................................. 15 370 .............................................................. 48 371 .............................................................. 20 372 .............................................................. 9 373 .............................................................. 104 374 .............................................................. 86 376 .............................................................. 86 377 .............................................................. 58 378 .............................................................. 42 379 .............................................................. 43 380 .............................................................. 43 381 .............................................................. 53 383 .............................................................. 4 384 .............................................................. 85 387 .............................................................. 4 388 .............................................................. 24 404 .............................................................. 52 405 .............................................................. 49 406 .............................................................. 3 407 .............................................................. 28 408 .............................................................. 21 409 .............................................................. 21

Abstract Index

412 ............................................................... 56 413 ............................................................... 99 414 ............................................................... 90 415 ............................................................... 90 417 ............................................................... 45 419 ............................................................... 74 420 ............................................................... 57 421 ............................................................... 28 422 ............................................................... 6 423 ............................................................... 100 424 ............................................................... 43 425 ............................................................... 26 426 ............................................................... 56 427 ............................................................... 7 428 ............................................................... 101 429 ............................................................... 60 430 ............................................................... 91 431 ............................................................... 104 432 ............................................................... 38 434 ............................................................... 60 435 ............................................................... 63 436 ............................................................... 112 438 ............................................................... 22 439 ............................................................... 22 441 ............................................................... 4 442 ............................................................... 101 443 ............................................................... 101 444 ............................................................... 101 445 ............................................................... 106 446 ............................................................... 6 447 ............................................................... 101 448 ............................................................... 97 449 ............................................................... 15 450 ............................................................... 38 452 ............................................................... 44 454 ............................................................... 8 459 ............................................................... 8 462 ............................................................... 64 463 ............................................................... 85 464 ............................................................... 48 465 ............................................................... 22 466 ............................................................... 35 469 ............................................................... 104 470 ............................................................... 36 471 ............................................................... 6 473 ............................................................... 82 474 ............................................................... 39 475 ............................................................... 21 476 ............................................................... 6 477 ............................................................... 56 478 ............................................................... 102 480 ............................................................... 7 482 ............................................................... 90 483 ............................................................... 90 484 ............................................................... 57 485 ............................................................... 25 486 ............................................................... 26 487 ............................................................... 86 488 ............................................................... 109 489 ............................................................... 31 490 ............................................................... 1 492 ............................................................... 51 493 ............................................................... 54 495 ............................................................... 5 496 ............................................................... 104 497 ............................................................... 41 498 ............................................................... 31

501 .............................................................. 71 503 .............................................................. 56 504 .............................................................. 43 505 .............................................................. 112 507 .............................................................. 103 508 .............................................................. 103 509 .............................................................. 39 511 .............................................................. 4 513 .............................................................. 58 515 .............................................................. 102 516 .............................................................. 32 517 .............................................................. 80 520 .............................................................. 62 522 .............................................................. 29 523 .............................................................. 92 524 .............................................................. 80 526 .............................................................. 103 527 .............................................................. 16 530 .............................................................. 52 531 .............................................................. 28 532 .............................................................. 1 533 .............................................................. 94 534 .............................................................. 65 535 .............................................................. 80 536 .............................................................. 62 538 .............................................................. 16 539 .............................................................. 107 540 .............................................................. 8 541 .............................................................. 110 542 .............................................................. 91 544 .............................................................. 24 547 .............................................................. 19 549 .............................................................. 2 551 .............................................................. 33 552 .............................................................. 62 555 .............................................................. 100 557 .............................................................. 35 558 .............................................................. 14 559 .............................................................. 49 560 .............................................................. 49 561 .............................................................. 83 563 .............................................................. 52 564 .............................................................. 75 565 .............................................................. 75 566 .............................................................. 75 569 .............................................................. 81 570 .............................................................. 90 571 .............................................................. 30 573 .............................................................. 37 574 .............................................................. 93 576 .............................................................. 52 578 .............................................................. 69 579 .............................................................. 69 581 .............................................................. 39 582 .............................................................. 26 583 .............................................................. 6 585 .............................................................. 30 586 .............................................................. 13 587 .............................................................. 20 588 .............................................................. 7 589 .............................................................. 14 590 .............................................................. 84 591 .............................................................. 50 595 .............................................................. 99 596 .............................................................. 51 597 .............................................................. 13 599 .............................................................. 73

Abstract Index

600 ............................................................... 20 601 ............................................................... 93 602 ............................................................... 76 603 ............................................................... 59 604 ............................................................... 90 605 ............................................................... 47 606 ............................................................... 78 607 ............................................................... 88 608 ............................................................... 72 611 ............................................................... 107 612 ............................................................... 34 614 ............................................................... 38 615 ............................................................... 37 618 ............................................................... 48 619 ............................................................... 39 622 ............................................................... 7 624 ............................................................... 10 625 ............................................................... 23 626 ............................................................... 42 627 ............................................................... 9 628 ............................................................... 1 630 ............................................................... 72 634 ............................................................... 87 635 ............................................................... 35 636 ............................................................... 42 637 ............................................................... 36 638 ............................................................... 88 639 ............................................................... 42 640 ............................................................... 38 641 ............................................................... 2 642 ............................................................... 70 643 ............................................................... 13 644 ............................................................... 13 645 ............................................................... 40 646 ............................................................... 72 648 ............................................................... 23 649 ............................................................... 42 650 ............................................................... 94 651 ............................................................... 18 653 ............................................................... 96 654 ............................................................... 112 655 ............................................................... 4 656 ............................................................... 5 658 ............................................................... 46 659 ............................................................... 14 660 ............................................................... 14 662 ............................................................... 33 663 ............................................................... 94 666 ............................................................... 40 667 ............................................................... 56 668 ............................................................... 3 669 ............................................................... 39 670 ............................................................... 109 672 ............................................................... 63 674 ............................................................... 108 675 ............................................................... 5 676 ............................................................... 54 677 ............................................................... 39 678 ............................................................... 39 679 ............................................................... 34 681 ............................................................... 20 682 ............................................................... 94 683 ............................................................... 102 684 ............................................................... 17 686 ............................................................... 20 688 ............................................................... 20 689 ............................................................... 55

691 .............................................................. 35 692 .............................................................. 46 693 .............................................................. 89 694 .............................................................. 18 695 .............................................................. 97 697 .............................................................. 12 698 .............................................................. 34 699 .............................................................. 79 700 .............................................................. 3 701 .............................................................. 43 702 .............................................................. 44 705 .............................................................. 100 706 .............................................................. 11 707 .............................................................. 35 708 .............................................................. 48 709 .............................................................. 82 710 .............................................................. 93 711 .............................................................. 105 712 .............................................................. 44 713 .............................................................. 82 714 .............................................................. 36 715 .............................................................. 110 716 .............................................................. 70 717 .............................................................. 13 718 .............................................................. 85 719 .............................................................. 6 721 .............................................................. 102 722 .............................................................. 48 726 .............................................................. 102 729 .............................................................. 19 730 .............................................................. 109 731 .............................................................. 83 732 .............................................................. 45 733 .............................................................. 50 734 .............................................................. 1 736 .............................................................. 99 737 .............................................................. 82 738 .............................................................. 10 739 .............................................................. 24 740 .............................................................. 89 742 .............................................................. 58 747 .............................................................. 30 748 .............................................................. 83 749 .............................................................. 107 750 .............................................................. 49 751 .............................................................. 50 752 .............................................................. 91 753 .............................................................. 112 754 .............................................................. 41 757 .............................................................. 87 758 .............................................................. 100 759 .............................................................. 73 760 .............................................................. 47 762 .............................................................. 25 763 .............................................................. 32 764 .............................................................. 28 765 .............................................................. 98 766 .............................................................. 89 767 .............................................................. 21 769 .............................................................. 77 771 .............................................................. 2 775 .............................................................. 106 776 .............................................................. 88 777 .............................................................. 38 779 .............................................................. 99 780 .............................................................. 37 781 .............................................................. 72

Abstract Index

783 ............................................................... 30 784 ............................................................... 10 785 ............................................................... 10 786 ............................................................... 30 787 ............................................................... 48 790 ............................................................... 46 792 ............................................................... 73 794 ............................................................... 29 795 ............................................................... 55 796 ............................................................... 106 797 ............................................................... 61 798 ............................................................... 74 799 ............................................................... 68 800 ............................................................... 66 801 ............................................................... 41 802 ............................................................... 37 804 ............................................................... 51 805 ............................................................... 41 806 ............................................................... 45 807 ............................................................... 112 810 ............................................................... 54 811 ............................................................... 19 812 ............................................................... 72 813 ............................................................... 11 815 ............................................................... 17 816 ............................................................... 113 819 ............................................................... 48 820 ............................................................... 94 822 ............................................................... 38 823 ............................................................... 76 824 ............................................................... 44 825 ............................................................... 78 829 ............................................................... 56 831 ............................................................... 67 832 ............................................................... 53 833 ............................................................... 79 834 ............................................................... 6 835 ............................................................... 79 837 ............................................................... 79 838 ............................................................... 40 839 ............................................................... 79 840 ............................................................... 20 841 ............................................................... 4 842 ............................................................... 17 843 ............................................................... 106 844 ............................................................... 50 846 ............................................................... 41 848 ............................................................... 51 850 ............................................................... 89 851 ............................................................... 67 852 ............................................................... 67 853 ............................................................... 59 854 ............................................................... 96 855 ............................................................... 43 856 ............................................................... 43 858 ............................................................... 88 859 ............................................................... 53 860 ............................................................... 89 863 ............................................................... 8 864 ............................................................... 101 866 ............................................................... 112 868 ............................................................... 55 870 ............................................................... 84 871 ............................................................... 77 872 ............................................................... 70 873 ............................................................... 83 874 ............................................................... 42

875 .............................................................. 29 878 .............................................................. 61 879 .............................................................. 10 880 .............................................................. 39 881 .............................................................. 74 883 .............................................................. 49 885 .............................................................. 62 887 .............................................................. 112 891 .............................................................. 67 895 .............................................................. 76 897 .............................................................. 89 898 .............................................................. 96 899 .............................................................. 45 900 .............................................................. 18 906 .............................................................. 31 907 .............................................................. 53 908 .............................................................. 27 909 .............................................................. 27 912 .............................................................. 12 915 .............................................................. 19 917 .............................................................. 18 918 .............................................................. 35 923 .............................................................. 66 924 .............................................................. 104 925 .............................................................. 74 926 .............................................................. 66 927 .............................................................. 42 930 .............................................................. 98 931 .............................................................. 33 932 .............................................................. 6 933 .............................................................. 14 934 .............................................................. 51 936 .............................................................. 112 937 .............................................................. 97 938 .............................................................. 97 939 .............................................................. 97 942 .............................................................. 27 944 .............................................................. 104 945 .............................................................. 70 947 .............................................................. 112 950 .............................................................. 79 952 .............................................................. 107 953 .............................................................. 21 954 .............................................................. 99 955 .............................................................. 83 956 .............................................................. 66 957 .............................................................. 98 958 .............................................................. 67 959 .............................................................. 67 960 .............................................................. 67 962 .............................................................. 98 966 .............................................................. 49 967 .............................................................. 45 968 .............................................................. 48 969 .............................................................. 45 970 .............................................................. 9 973 .............................................................. 109 974 .............................................................. 86 978 .............................................................. 107 979 .............................................................. 41 980 .............................................................. 68 982 .............................................................. 31 983 .............................................................. 46 984 .............................................................. 103 985 .............................................................. 102 986 .............................................................. 16 987 .............................................................. 74

Abstract Index

989 ............................................................... 74 991 ............................................................... 16 992 ............................................................... 31 993 ............................................................... 28 994 ............................................................... 22 995 ............................................................... 103 996 ............................................................... 13 999 ............................................................... 82 1000 ............................................................. 0 1001 ............................................................. 3 1003 ............................................................. 31 1005 ............................................................. 97 1007 ............................................................. 91 1010 ............................................................. 80 1012 ............................................................. 69 1014 ............................................................. 95 1016 ............................................................. 92 1017 ............................................................. 10 1018 ............................................................. 22 1019 ............................................................. 59 1021 ............................................................. 40 1023 ............................................................. 94 1024 ............................................................. 100 1025 ............................................................. 33 1026 ............................................................. 87 1028 ............................................................. 2 1031 ............................................................. 83 1032 ............................................................. 42 1033 ............................................................. 104 1035 ............................................................. 41 1036 ............................................................. 96 1038 ............................................................. 76 1039 ............................................................. 96 1041 ............................................................. 110 1042 ............................................................. 80 1044 ............................................................. 108 1045 ............................................................. 1 1047 ............................................................. 36 1048 ............................................................. 81 1049 ............................................................. 98 1053 ............................................................. 81 1055 ............................................................. 8 1056 ............................................................. 108 1058 ............................................................. 63 1061 ............................................................. 34 1063 ............................................................. 16 1064 ............................................................. 15 1065 ............................................................. 61 1067 ............................................................. 65 1068 ............................................................. 105 1069 ............................................................. 9 1070 ............................................................. 41 1072 ............................................................. 58 1073 ............................................................. 95 1075 ............................................................. 95 1076 ............................................................. 57 1077 ............................................................. 56 1079 ............................................................. 112 1081 ............................................................. 103 1082 ............................................................. 83 1083 ............................................................. 92 1085 ............................................................. 88 1086 ............................................................. 33 1087 ............................................................. 105 1088 ............................................................. 15 1089 ............................................................. 38 1094 ............................................................. 4

1095 ............................................................ 36 1096 ............................................................ 62 1098 ............................................................ 55 1099 ............................................................ 53 1102 ............................................................ 98 1103 ............................................................ 57 1104 ............................................................ 109 1106 ............................................................ 5 1110 ............................................................ 40 1111 ............................................................ 98 1112 ............................................................ 59 1113 ............................................................ 36 1114 ............................................................ 52 1115 ............................................................ 1 1116 ............................................................ 49 1117 ............................................................ 20 1118 ............................................................ 91 1121 ............................................................ 50 1122 ............................................................ 78 1123 ............................................................ 84 1124 ............................................................ 62 1125 ............................................................ 99 1126 ............................................................ 86 1127 ............................................................ 16 1128 ............................................................ 53 1129 ............................................................ 92 1130 ............................................................ 53 1131 ............................................................ 95 1132 ............................................................ 103 1133 ............................................................ 102 1134 ............................................................ 84 1136 ............................................................ 69 1137 ............................................................ 35 1138 ............................................................ 95 1140 ............................................................ 63 1141 ............................................................ 91 1142 ............................................................ 76 1143 ............................................................ 112 1144 ............................................................ 64 1145 ............................................................ 60 1146 ............................................................ 54 1148 ............................................................ 71 1150 ............................................................ 88 1151 ............................................................ 65 1152 ............................................................ 71 1153 ............................................................ 49 1154 ............................................................ 92 1155 ............................................................ 95 1156 ............................................................ 8 1157 ............................................................ 43 1158 ............................................................ 43 1159 ............................................................ 96 1161 ............................................................ 64 1162 ............................................................ 56 1164 ............................................................ 10 1165 ............................................................ 105 1166 ............................................................ 13 1167 ............................................................ 13 1168 ............................................................ 18 1171 ............................................................ 3 1173 ............................................................ 110 1175 ............................................................ 112 1176 ............................................................ 70 1180 ............................................................ 1 1181 ............................................................ 112 1182 ............................................................ 53 1183 ............................................................ 76

Abstract Index

1184 ............................................................. 3 1185 ............................................................. 3 1186 ............................................................. 94 1188 ............................................................. 39 1192 ............................................................. 59 1194 ............................................................. 24 1195 ............................................................. 84 1196 ............................................................. 30 1197 ............................................................. 95 1198 ............................................................. 110 1199 ............................................................. 19 1200 ............................................................. 79 1201 ............................................................. 65 1202 ............................................................. 104 1203 ............................................................. 23 1204 ............................................................. 82 1205 ............................................................. 112 1206 ............................................................. 20 1207 ............................................................. 58 1208 ............................................................. 108 1209 ............................................................. 14 1210 ............................................................. 86 1211 ............................................................. 110 1212 ............................................................. 108 1213 ............................................................. 77 1214 ............................................................. 110 1215 ............................................................. 100 1216 ............................................................. 94 1218 ............................................................. 103 1219 ............................................................. 59 1221 ............................................................. 32 1222 ............................................................. 30 1223 ............................................................. 87 1225 ............................................................. 84 1226 ............................................................. 102 1229 ............................................................. 65 1230 ............................................................. 60 1231 ............................................................. 47 1232 ............................................................. 15 1234 ............................................................. 21 1236 ............................................................. 26 1237 ............................................................. 23 1238 ............................................................. 20 1240 ............................................................. 27 1241 ............................................................. 28 1243 ............................................................. 101 1244 ............................................................. 42 1246 ............................................................. 4 1247 ............................................................. 66 1251 ............................................................. 66 1252 ............................................................. 30 1256 ............................................................. 72 1258 ............................................................. 63 1259 ............................................................. 38 1260 ............................................................. 94 1262 ............................................................. 14 1263 ............................................................. 62 1267 ............................................................. 105 1269 ............................................................. 72 1271 ............................................................. 16 1272 ............................................................. 93 1273 ............................................................. 53 1274 ............................................................. 59 1277 ............................................................. 89 1281 ............................................................. 5 1282 ............................................................. 37 1283 ............................................................. 37

1285 ............................................................ 26 1286 ............................................................ 80 1287 ............................................................ 95 1288 ............................................................ 80 1290 ............................................................ 16 1291 ............................................................ 2 1292 ............................................................ 35 1293 ............................................................ 65 1294 ............................................................ 53 1295 ............................................................ 108 1296 ............................................................ 5 1297 ............................................................ 12 1298 ............................................................ 98 1299 ............................................................ 39 1300 ............................................................ 34 1301 ............................................................ 110 1302 ............................................................ 63 1303 ............................................................ 36 1305 ............................................................ 102 1306 ............................................................ 107 1307 ............................................................ 50 1308 ............................................................ 99 1309 ............................................................ 112 1311 ............................................................ 85 1312 ............................................................ 78 1313 ............................................................ 99 1314 ............................................................ 2 1316 ............................................................ 65 1318 ............................................................ 97 1319 ............................................................ 63 1320 ............................................................ 43 1321 ............................................................ 93 1322 ............................................................ 28 1323 ............................................................ 55 1324 ............................................................ 56 1325 ............................................................ 98 1327 ............................................................ 77 1328 ............................................................ 109 1329 ............................................................ 11 1330 ............................................................ 32 1335 ............................................................ 87 1336 ............................................................ 76 1338 ............................................................ 48 1339 ............................................................ 81 1340 ............................................................ 107 1342 ............................................................ 83 1343 ............................................................ 46 1344 ............................................................ 108 1345 ............................................................ 107 1346 ............................................................ 54 1347 ............................................................ 9 1348 ............................................................ 93 1350 ............................................................ 88 1351 ............................................................ 88 1354 ............................................................ 12 1355 ............................................................ 104 1356 ............................................................ 70 1358 ............................................................ 23 1359 ............................................................ 112 1360 ............................................................ 100 1361 ............................................................ 26 1363 ............................................................ 89 1365 ............................................................ 27 1368 ............................................................ 99 1369 ............................................................ 24 1370 ............................................................ 60 1371 ............................................................ 77

Abstract Index

1372 ............................................................. 29 1373 ............................................................. 109 1374 ............................................................. 7 1375 ............................................................. 90 1376 ............................................................. 91 1378 ............................................................. 109 1381 ............................................................. 74 1382 ............................................................. 11 1384 ............................................................. 4 1386 ............................................................. 81 1388 ............................................................. 11 1390 ............................................................. 62 1392 ............................................................. 33 1393 ............................................................. 23 1395 ............................................................. 110 1396 ............................................................. 85 1398 ............................................................. 52 1399 ............................................................. 59 1401 ............................................................. 66 1405 ............................................................. 92 1406 ............................................................. 70 1407 ............................................................. 88 1408 ............................................................. 72 1409 ............................................................. 29 1410 ............................................................. 74 1411 ............................................................. 4 1412 ............................................................. 10 1413 ............................................................. 25 1415 ............................................................. 106 1416 ............................................................. 104 1417 ............................................................. 93 1420 ............................................................. 85 1422 ............................................................. 89 1423 ............................................................. 112 1425 ............................................................. 80 1428 ............................................................. 110 1431 ............................................................. 18 1432 ............................................................. 58 1436 ............................................................. 103 1437 ............................................................. 73 1438 ............................................................. 25 1439 ............................................................. 15 1440 ............................................................. 77 1441 ............................................................. 70 1442 ............................................................. 107 1444 ............................................................. 19 1448 ............................................................. 22 1449 ............................................................. 102 1451 ............................................................. 7 1452 ............................................................. 59 1453 ............................................................. 36 1454 ............................................................. 23 1458 ............................................................. 17 1462 ............................................................. 27 1463 ............................................................. 57 1464 ............................................................. 9 1465 ............................................................. 106 1466 ............................................................. 69 1467 ............................................................. 71 1469 ............................................................. 12 1470 ............................................................. 75 1471 ............................................................. 55 1474 ............................................................. 41 1476 ............................................................. 40 1477 ............................................................. 106 1479 ............................................................. 62 1483 ............................................................. 93

1484 ............................................................ 2 1485 ............................................................ 25 1486 ............................................................ 57 1487 ............................................................ 57 1488 ............................................................ 57 1489 ............................................................ 47 1490 ............................................................ 47 1491 ............................................................ 47 1492 ............................................................ 47 1493 ............................................................ 3 1494 ............................................................ 28 1495 ............................................................ 30 1497 ............................................................ 32 1498 ............................................................ 78 1499 ............................................................ 78 1500 ............................................................ 78 1501 ............................................................ 25 1502 ............................................................ 68 1503 ............................................................ 61 1504 ............................................................ 46 1505 ............................................................ 46 1506 ............................................................ 46 1507 ............................................................ 46 1509 ............................................................ 8 1510 ............................................................ 8 1516 ............................................................ 56

Abstract Index