Sports Camera

Sports CameraUser Guide

1Unpack the contents of the Kaiser Baas Sports Camera package. You should have the Sports Camera device, bracket holder, waterproof cap, A/V cable, carry bag, USB cable, strap and user guide.

User Guide Sports Camera pg1

2Connect the Sports Camera to your computer using the provided USB cable to charge the Li-ion battery. A full charge will take 3 to 4 hours.


3When the Sports Camera has been fully charged, disconnect the USB cable and insert a formatted Micro-SD card into the Micro-SD card slot.

TF

AV

TF

TF

R


4Connect the provided A/V cable to the AV output of the Sports Camera and connect the other end of the cable to the A/V input on your TV.

TF

AV

TF

TF

R


5Press and hold the ‘on/off’ button until you see a bright blue LED. The device will momentarily vibrate to indicate that it has been turned on. The blue LED will change to a pink colour. Press the ‘start/stop’ capture button to view the setup menu on the TV.

Setup

TV Output

LanguageSys. ResetTime Stamp

PAL

EnglishNext MenuDate&Time

Set&Exit

Setup

Quality

HD Cap. TimeHD Auto. Del.Date InputLight Freq.

Fine

5 Min.OnNext Menu50Hz

Set&Exit

On

Video capture

Snapshot capture

Motion video capture

Motion snapshot capture

LED status

Battery low / Memory full

6

7

98

1

2

5

43

10 11 12


Setup

TV Output


PAL


Set&Exit

Setup

Quality


Fine


Set&Exit

On

Video capture

Snapshot capture



LED status


6

7

98

1

2

5

43

10 11 12

1 Change capture quality

2 Change motion detection capture time

3 Turn on or off continual capture

4 Change date and time

5 Change light frequency

6 Select video output format

7 Language selection

8 Reset system settings

9 Enable time stamp

10 On/off (press and hold), mode selection

11 Start/stop capture, snap shot capture

12 On/off infrared LED


Sports Camera Operation

To turn on the Sports Camera, press and hold the on/off button until you see a bright blue LED. The device will momentarily vibrate to indicate that the device has been turned on.

The Sports Camera will automatically start in Video capture mode. This is indicated by the following LED status –

Video capture

To capture video press the ‘start/stop’ button. The blue LED will start to blink to indicate that video capture has started and the device will momentarily vibrate -

To stop capture, press the ‘start/stop’ button. The blue LED will stop blinking to indicate that video capture has stopped and the device will momentarily vibrate.

Snapshot capture

To change to Snapshot capture mode, press the ‘on/off’ button until you will see a red LED to indicate that you are in Snapshot capture mode. The device will momentarily vibrate –

To take a snapshot, press the ‘start/stop’ button. The red LED will turn off briefly and the device will momentarily vibrate.

Setup

TV Output


PAL


Set&Exit

Setup

Quality


Fine


Set&Exit

On

Video capture

Snapshot capture



LED status


6

7

98

1

2

5

43

10 11 12

Setup

TV Output


PAL


Set&Exit

Setup

Quality


Fine


Set&Exit

On

Video capture

Snapshot capture



LED status


6

7

98

1

2

5

43

10 11 12

Setup

TV Output


PAL


Set&Exit

Setup

Quality


Fine


Set&Exit

On

Video capture

Snapshot capture



LED status


6

7

98

1

2

5

43

10 11 12



To change to Motion video capture mode, press the ‘on/off’ button until you see a yellow and blue LED to indicate that you are in Motion video capture mode. The device will momentarily vibrate –

When the Sports Camera detects motion, it will start to capture video according to the time that you selected in the setup screen, for example, if you selected 5 mins, the device will capture video for 5 minutes. The blue LED will start to blink to indicate that video capture has started –


To change to Motion snapshot capture mode, press the ‘on/off’ button until you see a yellow and red LED to indicate that you are in Motion snapshot capture mode. The device will momentarily vibrate –

When the Sports Camera detects motion, it will take a snapshot and the red LED will turn off briefly.

*Please note; if you have turned off the continual capture option, the device will automatically turn off when the memory card has reached its capacity. If you press the ‘start/stop’ button when the device is turned on, the LED will start flashing blue and red, it will then vibrate twice and then turn off. You will have to delete some files on the memory card that are not required so you can continue capturing or use a different memory card that has the required free space. The device will also turn off when the battery power is low or if there has been no activity for 3 minutes

Setup

TV Output


PAL


Set&Exit

Setup

Quality


Fine


Set&Exit

On

Video capture

Snapshot capture



LED status


6

7

98

1

2

5

43

10 11 12

Setup

TV Output


PAL


Set&Exit

Setup

Quality


Fine


Set&Exit

On

Video capture

Snapshot capture



LED status


6

7

98

1

2

5

43

10 11 12

Setup

TV Output


PAL


Set&Exit

Setup

Quality


Fine


Set&Exit

On

Video capture

Snapshot capture



LED status


6

7

98

1

2

5

43

10 11 12


Setup

TV Output


PAL


Set&Exit

Setup

Quality


Fine


Set&Exit

On

Video capture

Snapshot capture



LED status


6

7

98

1

2

5

43

10 11 12

Setup

TV Output


PAL


Set&Exit

Setup

Quality


Fine


Set&Exit

On

Video capture

Snapshot capture



LED status


6

7

98

1

2

5

43

10 11 12

Frequently asked questions

Q. Can I play the captured video files and snapshots on the TV?A. Yes, you can use the A/V cable to play the video and snapshot files on the TV

Q. The audio is not playing correctly on the captured video filesA. Remove the waterproof cap if you are not using the Sports Camera under water for improved audio recording

Q. Why is the video not playing properly when capturing video in HD?A. A class 4 or class 6 Micro-SD card is required for smooth HD video capture

Q. Why does the device flash blue and red when I try and capture video?A. This indicates that the capacity of the inserted memory card has reached its capacity. You will need to delete some unwanted files or use a different memory card

Q. The device turns on but the buttons are not respondingA. Use a pin or paper clip to reset the device which is located next to the A/V output

Q. What is the maximum capacity memory card that I can use?A. The maximum capacity Micro-SD card supported is 32GB

Q. How long does the battery last?A. The built-in Li-ion battery will last 3 hours on a full charge


Sports Camera Specifications

Camera: 5.0 mega pixel CMOS sensor

Video format: AVI up to 1280 x 720 30fps

Continual capture option: 10sec, 1min, 5min, 10min

Capture angle: 120 degree wide-angle

Minimum illumination: 1 LUX

Frequency: 50Hz, 60Hz

Battery: 3.7V/850mAh

Power consumption: Below 1W

Video capture time: 3 hours

Charge time: 3 to 5 hours

Memory card type: Micro-SD up to 32GB

Waterproof depth: 30 metres maximum

Weight: 75g

Dimensions: 90 x 41 x 36mm


www.kaiserbaas.com/support

Date post:	27-Mar-2016
Category:	Documents
Upload:	hasan-coskun
View:	213 times
Download:	0 times

Sports Camera

Documents