polyurethane foam systemsSPRAY FOAMSPRAY FOAM
stops air infiltration
Handi-Foam® E-84 Class 1 is ideal for flash and batt, or hybridinsulation systems. A coating of E-84 Class 1 provides a tight air and vapor retarder while fiberglass or other traditional insulation materials provide R-value for an economical, efficientinsulation system.
ideal for flash and batt
tested to a high standard
Handi-Foam® Spray Foams are specifically designed to fill large voids and surfaces, creating a monolithic seal. Quick Cure and E-84 Class 1 Spray Foams provide an aged R-value of 6 per inch, helping to provide a more comfortable living and working space.
insulates, seals and coats
Handi-Foam® Spray Foams are often used to stop air infiltration and complete the building envelope.This helps to improve indoor air quality, helps lower heating and cooling costs and drastically reduce
energy consumption. In addition, Handi-Foam® Spray Foams can assist in attaining an ENERGY STAR® rating and/or LEED credits.
Handi-Foam® E-84 meets the following standards and test requirements:• Rated as a Class 1 building material per ASTM E-84• CCMC 13455-L was obtained by meeting the requirements of CAN/ULC S711.1-05 Standard for thermal insulation Bead-Applied Two Component Polyurethane Air Sealant Foam Part 1: Material Specification
• In accordance with AC377 for medium density foam (ICC report number pending).
FOR ADDITIONAL INFORMATION, PLEASE CONTACT YOUR LOCAL
DISTRIBUTOR OR VISIT WWW.FOMO.COM
2775 Barber Road PO Box 1078Norton, Ohio 44203 USAp: 1 330.753.4585 1 800.321.5585f: 1 330.753.5199e: [email protected] w: www.fomo.com
Handi-Foam® Spray Foams
are available in a variety of
formulations and sizes.
Handi-Foam® Air Seal, Sound
Barrier and SPF Roof Patch
are available in disposable
kits. In addition to being
portable and convenient,
they all come equipped with
Fomo’s patented Handi-Gun®.
Handi-Foam® Quick Cure,
E-84 Class 1 and Commercial
Vehicle are available in
disposable kits as well as
refillable systems. Fomo’s
refillable systems utilize the
MagnumTM Heated System.
The MagnumTM Heated
System maintains the
chemical at a consistent
temperature to ensure proper
application in various
climates. Compared to other
commercially available
dispensing systems, this
system is the easiest to use
and maintain. For technical
support on your applications,
contact Customer Care at
1-800-321-5585.
FOR ADDITIONAL INFORMATION, PLEASE CONTACTYOUR LOCAL DISTRIBUTOR OR VISITWWW.FOMO.COM
• dissolves uncured foam• cleans nozzles/tips• general cleaning purposes• item number P10083
Handi-Cleaner®
*All applications are subject to building code requirements.* always check local codes before using this product
• insulates exterior HVAC ductwork
• insulates pipes
• insulates and seals tubs and showers
• insulates and seals recessed lighting
• insulates the interior and exterior of cinder block
• refrigerated trailer repair
• theater/set design
• seals and insulates rim and band joists
• insulates wall cavities
• insulates storage tanks
• insulates and seals attic floors/ceilings
• mold and asbestos abatement or containment
• insulates and seals attic knee wallsand roof decks
• flash and batt insulation
common applications
* for information on our other accessory items or MagnumTM heated system, please visit www.fomo.com or review our product catalog
Handi-Foam® Spray Foam products are composed of a diisocyanate, hydrofluorocarbon blowing agent and polyol. Consult the product’s MSDS (Available at www.fomo.com) for specific information. The urethane foam produced from these ingredients will support combustion and may present a fire hazard if exposed to a fire or excessive heat about 240°F(116°C). Wear protective glasses or goggles, nitrile gloves, and clothing that protects against dermal exposure. Use only in a well ventilated area with certified respiratory protectionor a powered air purifying respirator (PAPR). Consult the product’s MSDS (Available at www.fomo.com) for specific information. For professional use only. A14002-04/2010