Lista de los catálogos de componentes en 3D disponibles en el portal de CAD http://www.tracepartsonline.net
http://www.tracepartsonline.net, Biblioteca gratuita de componentes CAD con planos 2D y modelos 3D para ADEM | Alibre Design | Architectural Desktop | AutoCAD | CADCEUS | CADISON |CADdy | CadKey | Cadra | CATIA | Cimatron | CoCreate | Helix | HiCAD | Ideas | IntelliCAD | Inventor | IronCAD | KeyCreator | KOMPAS | LogoCAD | Mastercam | Mechanical Desktop | Medusa |MegaCAD | MicroStation | NX | One Space Designer | Pro/ENGINEER | Solid Designer | Solid Edge | SolidThinking | SolidWorks | SpaceClaim | thinkdesign | TopSolid | TurboCAD | Unigraphics |Vectorworks | VISI | VX …
Page 1/23
T.E.A. TECHNIK s.r.o. - Czech Republic - The experts in drive and linear motion systemsRacks & Gears
Spur gearsHelical spur gears and rack (Brass)
Spur Gears, Module 0.3, Helical, Brass, Right-handed, 20° PA
Racks, Modules 0.3 & 0.5, Helical, Brass, Left-handed, 20° PA
Spur Gears, Module 0.5, Helical, Brass, Right-handed, 20° PA
Spur gears (Stainless) module 0.5 to 8
Spur gears, Module 8, C45 steel (non-hardened), 20° PA
Spur gears, Module 2, SS, 20° PA
Spur gears, Module 4, SS, 20° PA
Spur gears, Module 3, SS, 20° PA
Spur gears, Module 0.5, Steel ETG100, 20° PA
Spur gears, Module 2.5, SS, 20° PA
Spur gears, Module 1.5, SS, 20° PA
Spur gears, Module 1, SS, 20° PA
Spur gears, Module 1.5, Low Cost Series, C45 steel (non-hardened), 20° PA
Spur gears, Module 4, Low Cost Series, C45 steel (non-hardened), 20° PA
Spur gears, Module 2.5, Low Cost Series, C45 steel (non-hardened), 20° PA
Spur gears, Module 1.5, Low Cost Series, C45 steel (non-hardened), 20° PA
Spur gears, Module 3, Low Cost Series, C45 steel (non-hardened), 20° PA
Spur gears, Module 2, Low Cost Series, C45 steel (non-hardened), 20° PA
Spur gears, Module 2.5, Low Cost Series, C45 steel (non-hardened), 20° PA
Spur gears, Module 1, Low Cost Series, C45 steel (non-hardened), 20° PA
Spur gears, Module 3, Low Cost Series, C45 steel (non-hardened), 20° PA
Spur gears, Module 1, Low Cost Series, C45 steel (non-hardened), 20° PA
Lista de los catálogos de componentes en 3D disponibles en el portal de CAD http://www.tracepartsonline.net
http://www.tracepartsonline.net, Biblioteca gratuita de componentes CAD con planos 2D y modelos 3D para ADEM | Alibre Design | Architectural Desktop | AutoCAD | CADCEUS | CADISON |CADdy | CadKey | Cadra | CATIA | Cimatron | CoCreate | Helix | HiCAD | Ideas | IntelliCAD | Inventor | IronCAD | KeyCreator | KOMPAS | LogoCAD | Mastercam | Mechanical Desktop | Medusa |MegaCAD | MicroStation | NX | One Space Designer | Pro/ENGINEER | Solid Designer | Solid Edge | SolidThinking | SolidWorks | SpaceClaim | thinkdesign | TopSolid | TurboCAD | Unigraphics |Vectorworks | VISI | VX …
Page 2/23
Spur gears, Module 4, Low Cost Series, C45 steel (non-hardened), 20° PA
Spur gears, Module 2, Low Cost Series, C45 steel (non-hardened), 20° PA
Spur gears (Plastic) module 0.5 to 3
Spur gears, Module 1, Plastic (Hostaform C - Injection moulded), 20° PA
Spur gears, Module 3, Plastic (Hostaform C - Injection moulded), 20° PA
Spur gears, Module 0.5, Plastic (Hostaform C - Injection moulded), 20° PA
Spur gears, Module 2, Plastic (Hostaform C - Injection moulded), 20° PA
Spur gears, Module 1.5, Plastic (Hostaform C - Injection moulded), 20° PA
Internal gear
Internal spur gears, Module 0.5, Brass, 20° PA
Internal spur gears, Module 2, C45 steel (non-hardened), 20° PA
Internal spur gears, Module 0.7, Brass, 20° PA
Internal spur gears, Module 1.5, C45 steel (non-hardened), 20° PA
Internal spur gears, Module 1, Brass, 20° PA
Internal spur gears, Module 1, C45 steel (non-hardened), 20° PA
Rack - standard & round
Rack - module 0.5 to 6
Rack, Modules 0.5 to 6, SS, 20° PA
Rack, Modules 0.5 to 6, Brass, 20° PA
Rack, Modules 0.5 to 6, C45 steel (non-hardened), 20° PA
Rack, Modules 0.5 to 6, Plastic (injection moulded), 20° PA
Rack, Modules 0.5 to 2, Plastic (machined), 20° PA
Round rack - module 1.0 to 5.0
Rack (Round), Modules 1 to 5, SS, 20° PA
Rack (Round), Modules 1 to 5, C45 (non-hardened), 20° PA
Measuring rack
Lista de los catálogos de componentes en 3D disponibles en el portal de CAD http://www.tracepartsonline.net
http://www.tracepartsonline.net, Biblioteca gratuita de componentes CAD con planos 2D y modelos 3D para ADEM | Alibre Design | Architectural Desktop | AutoCAD | CADCEUS | CADISON |CADdy | CadKey | Cadra | CATIA | Cimatron | CoCreate | Helix | HiCAD | Ideas | IntelliCAD | Inventor | IronCAD | KeyCreator | KOMPAS | LogoCAD | Mastercam | Mechanical Desktop | Medusa |MegaCAD | MicroStation | NX | One Space Designer | Pro/ENGINEER | Solid Designer | Solid Edge | SolidThinking | SolidWorks | SpaceClaim | thinkdesign | TopSolid | TurboCAD | Unigraphics |Vectorworks | VISI | VX …
Page 3/23
Measuring Rack, 10mm Pitch, 20° PA
Measuring Rack, 7.5mm Pitch, 20° PA
Measuring Pinion, 7.5mm Pitch, 20° PA
Measuring Pinion, 12.5mm Pitch, 20° PA
Measuring Rack, 12.5mm Pitch, 20° PA
Measuring Pinion, 10mm Pitch, 20° PA
Bevel gears
Bevel Gears, 1:4 Ratio, Plastic (Injection moulded)
Bevel Gears, 1:5 Ratio, Plastic (Injection moulded)
Bevel Gears, 1:3 Ratio, Plastic (Injection moulded)
Bevel Gears, 1:1 Ratio, Plastic (Injection moulded)
Bevel Gears, 1:1 Ratio, SS
Bevel Gears, 1:2 Ratio, Plastic (Injection moulded)
Bevel Gears, Ratio 1:1, Helical, 34Cr4 Steel (non-hardened)
Wormgears
Worm Gear Set (with hollow worm), 1 - 8 leads, modul 2,0 - 4,0
Worm Gear Set, Mountable wheel rim with hollow worm, 1 - 8 leads, modul 2,0 - 4,0
Worm Gear , Modules 1.5 to 2, Bronze, Single & double lead, Right handed
Worm Gear Set, Mountable wheel rim with worm shaft, 1 - 8 leads, modul 1,0 - 4,0
Worm Gear Set (with worm shaft), 1 - 8 leads, modul 1,0 - 4,0
Worm, Modules 1.5 to 2, Single & double lead, Right handed, Steel:ETG 100
Worm, Modules 0.5 to 1, Single & double lead, Right handed, Steel:ETG 100
Worm Gear , Modules 0.5 to 1, Bronze, Single & double lead, Right handed
Spline shaft
Sline shaft & bushings
Lista de los catálogos de componentes en 3D disponibles en el portal de CAD http://www.tracepartsonline.net
http://www.tracepartsonline.net, Biblioteca gratuita de componentes CAD con planos 2D y modelos 3D para ADEM | Alibre Design | Architectural Desktop | AutoCAD | CADCEUS | CADISON |CADdy | CadKey | Cadra | CATIA | Cimatron | CoCreate | Helix | HiCAD | Ideas | IntelliCAD | Inventor | IronCAD | KeyCreator | KOMPAS | LogoCAD | Mastercam | Mechanical Desktop | Medusa |MegaCAD | MicroStation | NX | One Space Designer | Pro/ENGINEER | Solid Designer | Solid Edge | SolidThinking | SolidWorks | SpaceClaim | thinkdesign | TopSolid | TurboCAD | Unigraphics |Vectorworks | VISI | VX …
Page 4/23
Spline Hub (Round), Steel (C45), Standard: DIN ISO 14-A (DIN 5463)
Spline Shafts, SS (1.4301), Standard: DIN ISO 14-B (DIN 5463)
Spline Shafts, Steel (C45), Standard: DIN ISO 14-B (DIN 5463)
Spline Hub, SS (1.4305), Standard: DIN ISO 14-A (DIN 5463)
Spline Hub (Round), Bronze (Rg7), Standard: DIN ISO 14-A (DIN 5463)
Spline hubs & clamping rings
Clamping Ring for Spline Hub, Steel (C45), Standard: DIN ISO 14
Spline Hub (Flanged), Steel (C45), Standard: DIN ISO 14
Clamping Ring for Spline Hub, Bronze (Rg7), Standard: DIN ISO 14
Clamping Ring for Spline Hub, SS (1.4305), Standard: DIN ISO 14
Spline Hub (Flanged), Bronze (Rg7), Standard: DIN ISO 14
Spline Hub (Flanged), SS (1.4305), Standard: DIN ISO 14
Trapezoidal spindle & nuts
Trapezoidal Spindle, Steel (C15), Rolled, RH, Standard: DIN 103, single-thread
Trapezoidal Nut (Round), Bronze, single-thread
Trapezoidal Nut (Hexagonal), Bronze, single-thread
Trapezoidal Spindle, SS, Rolled, LH, Standard: DIN 103, single-thread
Trapezoidal Spindle, Steel (C15), Rolled, LH, Standard: DIN 103, single-thread
Trapezoidal Nut (Hexagonal), Steel, single-thread
Trapezoidal Spindle, SS, Rolled, RH, Standard: DIN 103, single-thread
Trapezoidal Nut (Round), Steel, single-thread
Roller chain & chain wheels
Chain Link Connector with Spring Lock for small Chains, Pitch 5, 6 and 8mm
Chain Wheels for Chain 8500 (Pitch 8mm)
Lista de los catálogos de componentes en 3D disponibles en el portal de CAD http://www.tracepartsonline.net
http://www.tracepartsonline.net, Biblioteca gratuita de componentes CAD con planos 2D y modelos 3D para ADEM | Alibre Design | Architectural Desktop | AutoCAD | CADCEUS | CADISON |CADdy | CadKey | Cadra | CATIA | Cimatron | CoCreate | Helix | HiCAD | Ideas | IntelliCAD | Inventor | IronCAD | KeyCreator | KOMPAS | LogoCAD | Mastercam | Mechanical Desktop | Medusa |MegaCAD | MicroStation | NX | One Space Designer | Pro/ENGINEER | Solid Designer | Solid Edge | SolidThinking | SolidWorks | SpaceClaim | thinkdesign | TopSolid | TurboCAD | Unigraphics |Vectorworks | VISI | VX …
Page 5/23
Chain Wheels for Chain 25 K (Pitch 1/4")
Chain Wheels for Chain 6300 (Pitch 6mm)
Chain Wheels for Chain 4180 (Pitch 4mm)
Chain Wheels for Chain 40 K (Pitch 1/4")
Chain Wheels for Chain 35 K (Pitch 1/4")
Chain Link (cranked double) for small chains, Pitch 5, 6 and 8 mm
Chains (small), Steel & SS, Pitch 4,5,6 and 8 mm
Chain Wheels for Chain 5200 (Pitch 5mm)
Chain Link Connector with Wire Lock for small Chains, Pitch 4
Angled and Flat Link Plate for small Chains, Pitch 6 & 8mm
Chains, Plastic, Pitch 1/4", 3/8", 1/2" [ANSI-Norm]
Gear mechanismsBevel gearbox
Mini bevel gearbox
bevel gearbox type 71 S, type 71 K
bevel gearbox type 610 S
bevel gearbox type PV
Bevel gearbax LM, MB, TB & 81
bevel gearbox, light constuction, Type LM
bevel gearbox, light constuction, Type LM12-1D
bevel gearbox, light construction, Type LM12-1
Bevel gearbox reinforced construction BG series
bevel gearbox type MAS
bevel gearbox form AP
bevel gearbox type BD
bevel gearbox Form AD
Lista de los catálogos de componentes en 3D disponibles en el portal de CAD http://www.tracepartsonline.net
http://www.tracepartsonline.net, Biblioteca gratuita de componentes CAD con planos 2D y modelos 3D para ADEM | Alibre Design | Architectural Desktop | AutoCAD | CADCEUS | CADISON |CADdy | CadKey | Cadra | CATIA | Cimatron | CoCreate | Helix | HiCAD | Ideas | IntelliCAD | Inventor | IronCAD | KeyCreator | KOMPAS | LogoCAD | Mastercam | Mechanical Desktop | Medusa |MegaCAD | MicroStation | NX | One Space Designer | Pro/ENGINEER | Solid Designer | Solid Edge | SolidThinking | SolidWorks | SpaceClaim | thinkdesign | TopSolid | TurboCAD | Unigraphics |Vectorworks | VISI | VX …
Page 6/23
bevel gearbox type DX
bevel gearbox type MB
bevel gearbox with motor flange-adapter type MA
bevel gearbox Form AS
bevel gearbox type BS
bevel gearbox type MBH
bevel gearbox type MC
bevel gearbox type MAD
bevel gearbox type BH
bevel gearbox type MAH
bevel gearbox type B
bevel gearbox type MBD
bevel gearbox form DR
bevel gearbox form C
bevel gearbox type AH
bevel gearbox Form AX
bevel gearbox form A
bevel gearbox type MDR
bevel gearbox type MBS
Bevel gearbox R / RH
bevel gearbox Type R
Actuators & Screw jacks
Mini actuator
Mini Actuator MHG100/12, MHG100/50, max. Lifting Force 1200 N
Lista de los catálogos de componentes en 3D disponibles en el portal de CAD http://www.tracepartsonline.net
http://www.tracepartsonline.net, Biblioteca gratuita de componentes CAD con planos 2D y modelos 3D para ADEM | Alibre Design | Architectural Desktop | AutoCAD | CADCEUS | CADISON |CADdy | CadKey | Cadra | CATIA | Cimatron | CoCreate | Helix | HiCAD | Ideas | IntelliCAD | Inventor | IronCAD | KeyCreator | KOMPAS | LogoCAD | Mastercam | Mechanical Desktop | Medusa |MegaCAD | MicroStation | NX | One Space Designer | Pro/ENGINEER | Solid Designer | Solid Edge | SolidThinking | SolidWorks | SpaceClaim | thinkdesign | TopSolid | TurboCAD | Unigraphics |Vectorworks | VISI | VX …
Page 7/23
Mini Actuator HG LAM, max. Lifting Force 10 N
Mini Actuator HG2 Accessories - Spindle
Mini Actuator MHG100/12R, MHG100/50R, max. Lifting Force 1200 N
Mini Actuator HG1, max. Lifting Force 450 N
Mini Actuator MHG100 Accessories - Spindle
Mini Actuator HG2, max. Lifting Force 3200 N
Mini Actuator MHG100 Accessories - Rod End (Heavy duty)
Mini Actuator MHG100 Accessories - Cardan Pins
Mini Actuator MHG100 Accessories - Clevis Head
Mini Actuator HG120, max. Lifting Force 1200 N
Actuators, 750 to 2500 N max. lifting force
Actuator HG/AL1, max. Lifting Force 1200 N
Actuator HG 12, max. Lifting Force 750 N
Actuator HG7000, max. Lifting Force 2500 N
Actuators, 3500 to 4000 N max. lifting force
Actuator HG 200 K Accessories - Spindle Mount Fitting
Actuator HG700D, max. Lifting Force 3500 N
Actuator HG 28, max. Lifting Force 3500 N
Actuator HG 200 S, max Lifting Force 4000 N
Actuator HG 200 K, max. Lifting Force 4000 N
Actuator HG 200 K Accessories - Plastic Nut
Actuator HG 200 K Accessories - Spindle
Actuators, 5000 to 9000 N max. lifting force
Actuator HG5000, max. Lifting Force 7500 N
Lista de los catálogos de componentes en 3D disponibles en el portal de CAD http://www.tracepartsonline.net
http://www.tracepartsonline.net, Biblioteca gratuita de componentes CAD con planos 2D y modelos 3D para ADEM | Alibre Design | Architectural Desktop | AutoCAD | CADCEUS | CADISON |CADdy | CadKey | Cadra | CATIA | Cimatron | CoCreate | Helix | HiCAD | Ideas | IntelliCAD | Inventor | IronCAD | KeyCreator | KOMPAS | LogoCAD | Mastercam | Mechanical Desktop | Medusa |MegaCAD | MicroStation | NX | One Space Designer | Pro/ENGINEER | Solid Designer | Solid Edge | SolidThinking | SolidWorks | SpaceClaim | thinkdesign | TopSolid | TurboCAD | Unigraphics |Vectorworks | VISI | VX …
Page 8/23
Actuator HG/AL3, max. Lifting Force 5000 N, max. Stroke 995 mm
Actuator HG9000S, max. Lifting Force 9000 N, max. Stroke 1050 mm
Actuators, Compact drive
Mounting Bracket (rear end) K9-L
Mounting Bracket FB9-A
Mounting Bracket (mid-mount) K29/B for Box Spindle Drive HG30
Actuator HG11, max. Lifting Force 3000 N
Mounting Bracket (mid-mount) K28/B for Box Spindle Drive HG30
Mounting Bracket FB9-C
Actuator HG 22, max. Lifting Force 400 N
Actuator HG10, max. Lifting Force 2000 N
Mounting Bracket (Hinged) K26/B for Box Spindle Drive HG30
Mounting Bracket (Hinged) K27/B for Box Spindle Drive HG30
Mounting Bracket FB9-H
Universal Mounting Bracket K9-0 with clamping Ring
Actuator HG9, max. Lifting Force 1500 N
Clamping Ring K9-R
Actuator HG30, 230 V - 50 Hz, max. Lifting Force 500 N
Screw jacks, SE & SH series
Screw jack, max. lifting force 100,000 N
Spindle Mounting Flange SH
Actuator Mounting Rails SE
Trapezoidal Spindle SE
Cardan Adapter for Flange Nut SH2-KAF
Lista de los catálogos de componentes en 3D disponibles en el portal de CAD http://www.tracepartsonline.net
http://www.tracepartsonline.net, Biblioteca gratuita de componentes CAD con planos 2D y modelos 3D para ADEM | Alibre Design | Architectural Desktop | AutoCAD | CADCEUS | CADISON |CADdy | CadKey | Cadra | CATIA | Cimatron | CoCreate | Helix | HiCAD | Ideas | IntelliCAD | Inventor | IronCAD | KeyCreator | KOMPAS | LogoCAD | Mastercam | Mechanical Desktop | Medusa |MegaCAD | MicroStation | NX | One Space Designer | Pro/ENGINEER | Solid Designer | Solid Edge | SolidThinking | SolidWorks | SpaceClaim | thinkdesign | TopSolid | TurboCAD | Unigraphics |Vectorworks | VISI | VX …
Page 9/23
Screw Jack SE w/ axial moved spindle
Spindle Guide SE
Cardan Adapter for Actuator SE
Trapezoidal Spindle SH
Flange Nut SH
Fork Head SH2
Screw Jack SE w/ rotating spindle
Protection Tube
Spindle Guide SEO
Flange for Protection Tube
Screw jack, max. lifting force 100,000 N - Reinforced construction
Lubrication Adapter Ring (SAR)
Spindle Mounting Flange SH
Screw Jack SH50 with rotating spindle, max. Lifting Force 50000 N
Mounting Flange suit Rotating Spindle (with bearing) FLL
Safety Grip Nut for rotating spindle (SFMR)
Safety Grip Nut for axial moved spindle (SFMS)
Screw Jack SH100 with rotating spindle, max. Lifting Force 100000 N
Pedestal Bearing for connecting Shafts
Screw Jack SH100 with axial moved spindle, max. Lifting Force 100000 N
Screw Jack SH25 with axial moved spindle, max. Lifting Force 25000 N
Screw Jack SH10 with axial moved spindle, max. Lifting Force 10000 N
Cardan Adapter SH
Lista de los catálogos de componentes en 3D disponibles en el portal de CAD http://www.tracepartsonline.net
http://www.tracepartsonline.net, Biblioteca gratuita de componentes CAD con planos 2D y modelos 3D para ADEM | Alibre Design | Architectural Desktop | AutoCAD | CADCEUS | CADISON |CADdy | CadKey | Cadra | CATIA | Cimatron | CoCreate | Helix | HiCAD | Ideas | IntelliCAD | Inventor | IronCAD | KeyCreator | KOMPAS | LogoCAD | Mastercam | Mechanical Desktop | Medusa |MegaCAD | MicroStation | NX | One Space Designer | Pro/ENGINEER | Solid Designer | Solid Edge | SolidThinking | SolidWorks | SpaceClaim | thinkdesign | TopSolid | TurboCAD | Unigraphics |Vectorworks | VISI | VX …
Page 10/23
Trapezoidal Thread Spindle SH-TZ
Adapter Flange for Motor Type B14 (small flange)
Screw Jack SH50 with axial moved spindle, max. Lifting Force 50000 N
Adapter Flange for Motor Type B5
Trapezoidal Thread Spindle SH-TG
Clevis Head SH
Screw Jack SH10 with rotating spindle, max. Lifting Force 10000 N
Protective Tube with integrated Rod End
Adapter Flange for Motor Type B14
Actuator Mounting Rails SH
Flexible Couplings
Cardan Adapter SH
Flange Nut SH
Antirotation Device SH
Screw Jack SH25 with rotating spindle, max. Lifting Force 25000 N
Connection Shafts
Screw Jack SH5 with axial moved spindle, max. Lifting Force 5000 N
Hand Wheels
Limit Switch Mount for Stroke Limitation (IB) (without Limit Switches)
Screw Jack SH5 with rotating spindle, max. Lifting Force 5000 N
Bellows for Series SH
Miniature Precision Screw Jack System
Trapezoidal Thread Spindle for Miniature Precision Actuator 23S
Lista de los catálogos de componentes en 3D disponibles en el portal de CAD http://www.tracepartsonline.net
http://www.tracepartsonline.net, Biblioteca gratuita de componentes CAD con planos 2D y modelos 3D para ADEM | Alibre Design | Architectural Desktop | AutoCAD | CADCEUS | CADISON |CADdy | CadKey | Cadra | CATIA | Cimatron | CoCreate | Helix | HiCAD | Ideas | IntelliCAD | Inventor | IronCAD | KeyCreator | KOMPAS | LogoCAD | Mastercam | Mechanical Desktop | Medusa |MegaCAD | MicroStation | NX | One Space Designer | Pro/ENGINEER | Solid Designer | Solid Edge | SolidThinking | SolidWorks | SpaceClaim | thinkdesign | TopSolid | TurboCAD | Unigraphics |Vectorworks | VISI | VX …
Page 11/23
Thrust bearing Plate for Miniature Precision Actuator 23S, 23R
Mounting Flange for Miniature Precision Actuator 23S, 23R
Limit Switch for Miniature Precision Actuator 23S, 23R
Flange Nut for Miniatur Precision Actuator 23S, 23R
Plug-in-Shaft 23KS-HR for manual Operation for Miniature Pecision Bevel Gear 23KG
Special Screw for Miniature Bevel Gear 23KG
Connection Shaft 23W for Miniature Precision Actuator 23S, 23R
Limit Switch Set for Miniature Precision Actuator 23S, 23R
Hand Wheel HR-80-11 for manual Operation Miniature Precision Actuator 23S, 23R
Bearing Block 23 HR-LB for manual Operation for Miniature Precision Actuator 23S, 23R
Miniature Precision Actuator 23S, max. Lifting Force 250 N
Plug-in-Shaft 23KS for Miniature Pecision Bevel Gear 23KG
Miniature Precision Actuator 23R, max. Lifting Force 250 N
Universal Motor Flange for Miniature Precision Actuator 23S, 23R
Trapezoidal Thread Spindle for Miniature Precision Actuator 23R
Eccentric Ring 23 KG-ZR für Miniature Bevel Gear 23KG
Pivot Bearing Panel for Miniature Precision Actuator 23S, 23R
Minature Bevel Gear 23KG, Extension to Actuator 23
Bellow F for Miniatur Precision Actuator 23S, 23R
Flexible Coupling for Miniature Precision Actuator 23S, 23R
Transformer with Rectifier
Transformer with Rectifier
Couplings
Multi jaw coupling
Lista de los catálogos de componentes en 3D disponibles en el portal de CAD http://www.tracepartsonline.net
http://www.tracepartsonline.net, Biblioteca gratuita de componentes CAD con planos 2D y modelos 3D para ADEM | Alibre Design | Architectural Desktop | AutoCAD | CADCEUS | CADISON |CADdy | CadKey | Cadra | CATIA | Cimatron | CoCreate | Helix | HiCAD | Ideas | IntelliCAD | Inventor | IronCAD | KeyCreator | KOMPAS | LogoCAD | Mastercam | Mechanical Desktop | Medusa |MegaCAD | MicroStation | NX | One Space Designer | Pro/ENGINEER | Solid Designer | Solid Edge | SolidThinking | SolidWorks | SpaceClaim | thinkdesign | TopSolid | TurboCAD | Unigraphics |Vectorworks | VISI | VX …
Page 12/23
Helical Gear Coupling Type SKSS2022
Cross slotted coupling
Cross-slotted Coupling Type SKPS1520, Injection moulded Plastic
Cross-slotted Coupling Type SKPS2224, Injection moulded Plastic
Helix coupling
Helix coupling Type WKAS
Helix coupling with Aluminum clamp, Type BCZ
Helix coupling with stainless steel clamp, Type HCZ
Helix coupling with Aluminum clamp, Type WKAK
Bellow coupling
Bellow coupling with stainless steel bellow, short version
Bellow coupling with clamping hub, with nickel bellow
Bellow coupling with clamping hub, with stainless steel bellow, type BK
Bellow coupling with clamping flange, with stainless steel bellow, type BKXK
Bellow coupling with stainless steel bellow, long version
Bellow coupling with bronze bellow, type BKBS
Bellow coupling with stainless steel bellow, type BKXS
Spring spacer & membrane coupling
Spring spacer coupling for bigger radial misalignments, low bearing loads
Spring spacer coupling with clamping lange
Membrane coupling
Spring spacer coupling
Spring spacer coupling for aligned shafts
Spring coupling
Spring coupling
Cardan coupling
Lista de los catálogos de componentes en 3D disponibles en el portal de CAD http://www.tracepartsonline.net
http://www.tracepartsonline.net, Biblioteca gratuita de componentes CAD con planos 2D y modelos 3D para ADEM | Alibre Design | Architectural Desktop | AutoCAD | CADCEUS | CADISON |CADdy | CadKey | Cadra | CATIA | Cimatron | CoCreate | Helix | HiCAD | Ideas | IntelliCAD | Inventor | IronCAD | KeyCreator | KOMPAS | LogoCAD | Mastercam | Mechanical Desktop | Medusa |MegaCAD | MicroStation | NX | One Space Designer | Pro/ENGINEER | Solid Designer | Solid Edge | SolidThinking | SolidWorks | SpaceClaim | thinkdesign | TopSolid | TurboCAD | Unigraphics |Vectorworks | VISI | VX …
Page 13/23
UNI-LAT® cardan coupling
OLDHAM® coupling
Oldham transmission disks
Oldham hubs
Oldham Coupling
Friction coupling
Friction coupling LF, steel, corosion resistant coating
Friction coupling type RK2
Friction coupling type 968
Friction coupling LFG, aluminim alloy [Zn A127 Cu2 EN1774]
Friction coupling type RK1
Friction coupling LF / LFG with overload protection
Friction coupling LF, aluminim alloy [Zn A127 Cu2 EN1774]
Friction coupling type RK
Friction coupling type 970
Friction coupling type RT
Friction coupling type 969
Friction coupling GS with overload protection
Friction coupling LFG, steel, corosion resistant coating
Permanent magnetic coupling
Permanent Magnetic Coupling
Safety clutch
Saftey clutch type KS
Saftey clutch type KSB
Spider coupling
Elastic spider coupling, grey cast iron
Lista de los catálogos de componentes en 3D disponibles en el portal de CAD http://www.tracepartsonline.net
http://www.tracepartsonline.net, Biblioteca gratuita de componentes CAD con planos 2D y modelos 3D para ADEM | Alibre Design | Architectural Desktop | AutoCAD | CADCEUS | CADISON |CADdy | CadKey | Cadra | CATIA | Cimatron | CoCreate | Helix | HiCAD | Ideas | IntelliCAD | Inventor | IronCAD | KeyCreator | KOMPAS | LogoCAD | Mastercam | Mechanical Desktop | Medusa |MegaCAD | MicroStation | NX | One Space Designer | Pro/ENGINEER | Solid Designer | Solid Edge | SolidThinking | SolidWorks | SpaceClaim | thinkdesign | TopSolid | TurboCAD | Unigraphics |Vectorworks | VISI | VX …
Page 14/23
Elastic spider coupling, aluminum
Elastic spider coupling, type M, GD Zn A14, spider Perbunan
Anti-backlash coupling
Coupling (anti-backlash), without bore, no key way, with 2 set screws
Coupling (anti-backlash), with bore H7, double slotted version with 2 set screws, no key way
Coupling (anti-backlash), with bore H7and key way, with 2 set screws
Coupling (anti-backlash), with bore H7, single slotted version with 1 set screw, no key way
Shaft to hub connection
CLAMPEX® shaft to hub connector, self centering, type 200
CLAMPEX® shaft to hub connector, self centering, type 225 for flange connection
CLAMPEX® shaft to hub connector, self centering, type 250 for flange connection
CLAMPEX® shaft to hub connector, non self centering, type 100
CLAMPEX® shaft to hub connector, self centering, type 201
CLAMPEX® shaft to hub connector, non self centering, type 150
Reduction bushing, clamping flange
HUCO-LOK ® reduction bushing
Clamping flange KFAN
Clamping flange KFAG
Synchronous shaft
Synchronous (Connector) Shaft, Stainless steel, Backlash-free
Universal jointsUniversal joints, Low cost
Universal Joint (Double), Plain bearings, Low Cost, DIN808/DIN7551
Universal Joint (Double), Plain bearings, Low Cost, DIN808-G/DIN7551
Universal Joint (Single), Plain bearings, Low Cost, DIN808-G/DIN7551
Universal Joint (Single), Plain bearings, Low Cost, DIN808/DIN7551
Universal joints, Single & double
Lista de los catálogos de componentes en 3D disponibles en el portal de CAD http://www.tracepartsonline.net
http://www.tracepartsonline.net, Biblioteca gratuita de componentes CAD con planos 2D y modelos 3D para ADEM | Alibre Design | Architectural Desktop | AutoCAD | CADCEUS | CADISON |CADdy | CadKey | Cadra | CATIA | Cimatron | CoCreate | Helix | HiCAD | Ideas | IntelliCAD | Inventor | IronCAD | KeyCreator | KOMPAS | LogoCAD | Mastercam | Mechanical Desktop | Medusa |MegaCAD | MicroStation | NX | One Space Designer | Pro/ENGINEER | Solid Designer | Solid Edge | SolidThinking | SolidWorks | SpaceClaim | thinkdesign | TopSolid | TurboCAD | Unigraphics |Vectorworks | VISI | VX …
Page 15/23
Universal Joint (Single), Plain bearings, DIN808-G/DIN7551
Universal Joint (Double), Stainless Steel, Plain bearings, Heavy Duty, Series X, DIN808-G
Universal Joint (Single), Needle bearings, Heavy Duty, Series H, DIN808, Maintenance free
Universal Joint (Double), Plain bearings, Heavy Duty, Series G, DIN808-G
Universal Joint (Double), Needle bearings, Heavy duty, DIN808-W/DIN7551, Maintenance free
Universal Joint (Single), Needle bearings, DIN808-W/DIN7551, Maintenance free
Universal Joint (Double), Plain bearings, Heavy Duty, DIN808-G
Universal Joint (Single), Stainless Steel, Friction bearings, Heavy Duty, Series X, DIN808-G
Universal Joint (Single), Needle bearings, Heavy Duty, DIN808-W/DIN7551, Maintenance free
Universal Joint (Single), Plain bearings, Heavy Duty, DIN808-G
Universal Joint (Double), Needle bearings, Heavy duty, Series H, DIN 808-W, Maintenance free
Universal Joint (Single), Plain bearings, Heavy Duty, Series G, DIN808-G
Universal Joint (Double), Needle bearings, DIN808-W/DIN755, Maintenance free
Universal Joint (Double), Plain bearings, DIN 808-G/DIN 7551
Universal Joint (Single) Plain bearings, Link construction, Series S, DIN 808
Universal joints, Telescopic
Universal Joint (Telescopic), Plain bearings, Heavy Duty, Series G, DIN808-G
Universal Joint (Precision telescopic), Needle bearings, Heavy duty, Series H, DIN808-W, Maintenance free
Universal Joint (Precision telescopic), Plain bearings, Heavy duty, Series G, DIN808-G
Universal Joint (Telescopic), Needle bearings, Heavy Duty, Series H, DIN808-G, Maintenance free
Protective bellows
Universal Joint Accessories - Neoprene Bellow suit series M
Plastic universal joint (including telescopic)
HUCO-POL® Plastic Universal Joint, (Single), Type D
Lista de los catálogos de componentes en 3D disponibles en el portal de CAD http://www.tracepartsonline.net
http://www.tracepartsonline.net, Biblioteca gratuita de componentes CAD con planos 2D y modelos 3D para ADEM | Alibre Design | Architectural Desktop | AutoCAD | CADCEUS | CADISON |CADdy | CadKey | Cadra | CATIA | Cimatron | CoCreate | Helix | HiCAD | Ideas | IntelliCAD | Inventor | IronCAD | KeyCreator | KOMPAS | LogoCAD | Mastercam | Mechanical Desktop | Medusa |MegaCAD | MicroStation | NX | One Space Designer | Pro/ENGINEER | Solid Designer | Solid Edge | SolidThinking | SolidWorks | SpaceClaim | thinkdesign | TopSolid | TurboCAD | Unigraphics |Vectorworks | VISI | VX …
Page 16/23
HUCO-POL® Plastic Universal Joint, (Double), Type A
HUCO-POL® Plastic Universal Joint, (Double), TypeB
HUCO-POL® Plastic Universal Joint (Telescopic), Type BC
HUCO-POL® Plastic Universal Joint, (Single), Type A
HUCO-POL® Plastic Universal Joint, (Single), Type B
Plastic Universal Joints (Single)
HUCO-POL® Plastic Universal Joint, (Telescopic), Type DC
Rod ends & Angle joints
Rod End (Male) Type POS
Angle Joint, Threaded Bolt, DIN 71802, Hardened Ball Stud, Type C
Rod End (Female), Stainless Steel, Type PHS SS
Angle Joint, Pivot Pin, DIN 71802, Hardened Ball Stud, Type BS
Angle Joint, Pivot Pin, DIN 71802, Hardened Ball Stud, Type B
Rod End (Male), Stainless Steel, Type POS SS
Angle Joint Threaded Bolt DIN 71802, Hardened Ball Stud, Type CS
Sealing Ring for Angle Joint
Rod End (Female) Type PHS
Free wheels
GF, GV & GL series
model GF
model GL
model GV
US, USNU & UF series
model US
model USNU
Lista de los catálogos de componentes en 3D disponibles en el portal de CAD http://www.tracepartsonline.net
http://www.tracepartsonline.net, Biblioteca gratuita de componentes CAD con planos 2D y modelos 3D para ADEM | Alibre Design | Architectural Desktop | AutoCAD | CADCEUS | CADISON |CADdy | CadKey | Cadra | CATIA | Cimatron | CoCreate | Helix | HiCAD | Ideas | IntelliCAD | Inventor | IronCAD | KeyCreator | KOMPAS | LogoCAD | Mastercam | Mechanical Desktop | Medusa |MegaCAD | MicroStation | NX | One Space Designer | Pro/ENGINEER | Solid Designer | Solid Edge | SolidThinking | SolidWorks | SpaceClaim | thinkdesign | TopSolid | TurboCAD | Unigraphics |Vectorworks | VISI | VX …
Page 17/23
model UF
GL…F2-D2, GL…F4-D2, GL…F5-D2, GLP…F7-D7 & GL…TR series
model GLP .. F7-D7
model GL .. - F4-D2
model GL .. F2-D2 [D3]
model GL .. F5-D2 [D3]
model GL.. TR
GLG, GO & UK series
model GO
model UK
model GLG
Free wheel cages GM GP & Free wheel race GP
model GP
model ring GP
model GM
Machine feetMachine feet
Machine Footing and Base Plate
Machine Foot Accessories - Base Plate
Machine Footing
Leveling Element with Vibration Damper
Machine feet, Stainless steel
Machine Footing, Stainless, Base Plate: Stainless Steel 1.4301
Machine Footing, Stainless, Base Plate: Polyamide (reinforced)
Machine feet, Anti-vibration mounting
Machine Footing with Vibration Damping
Threaded inserts
Machine Foot Accessories - Threaded Insert (Square)
Lista de los catálogos de componentes en 3D disponibles en el portal de CAD http://www.tracepartsonline.net
http://www.tracepartsonline.net, Biblioteca gratuita de componentes CAD con planos 2D y modelos 3D para ADEM | Alibre Design | Architectural Desktop | AutoCAD | CADCEUS | CADISON |CADdy | CadKey | Cadra | CATIA | Cimatron | CoCreate | Helix | HiCAD | Ideas | IntelliCAD | Inventor | IronCAD | KeyCreator | KOMPAS | LogoCAD | Mastercam | Mechanical Desktop | Medusa |MegaCAD | MicroStation | NX | One Space Designer | Pro/ENGINEER | Solid Designer | Solid Edge | SolidThinking | SolidWorks | SpaceClaim | thinkdesign | TopSolid | TurboCAD | Unigraphics |Vectorworks | VISI | VX …
Page 18/23
Machine Foot Accessories - Threaded Insert (Round)
Rubber buffersRubber buffers, A - E
Rubber-metal Buffer, Standard
Rubber buffers, 51 - 54, Stainless
Rubber-metal Buffer, Stainless
Linear slide systemsLinRoL® linear system
Linear Guide Spacer Rails, Stainless steel
Guide Rails, Rectangular
Carriage Plates, 90°
Carriage Plates, 70°
Support Roller, Stainless steel
Guide Wheels, 70°, Version 2, short stud
Guide Rails, 70°, Single-edged
Guide Wheels, 70°, individual bearings
Guide Rails, 90°, Double-edged, Stainless steel
Linear Guide Spacer Rails
Guide Wheels, 90°, One-piece outer
Guide Rails, 90°, Single-edged
Guide Wheels, 90°, One-piece outer, Stainless steel
assembled unit 90°, stainless steel
Guide Wheels, 70°, One-piece outer
assembled unit 70°
Guide Rails, 90°, Double-edged
support roller
Lista de los catálogos de componentes en 3D disponibles en el portal de CAD http://www.tracepartsonline.net
http://www.tracepartsonline.net, Biblioteca gratuita de componentes CAD con planos 2D y modelos 3D para ADEM | Alibre Design | Architectural Desktop | AutoCAD | CADCEUS | CADISON |CADdy | CadKey | Cadra | CATIA | Cimatron | CoCreate | Helix | HiCAD | Ideas | IntelliCAD | Inventor | IronCAD | KeyCreator | KOMPAS | LogoCAD | Mastercam | Mechanical Desktop | Medusa |MegaCAD | MicroStation | NX | One Space Designer | Pro/ENGINEER | Solid Designer | Solid Edge | SolidThinking | SolidWorks | SpaceClaim | thinkdesign | TopSolid | TurboCAD | Unigraphics |Vectorworks | VISI | VX …
Page 19/23
Guide Rails, 70°, Double-edged
assembled unit 90°
Carriage Plates, 90°, Stainless steel
120°Aluminium system
Mounting Element SQ
Linearachse LAK20
Linearachse LAK208R
AD..M Complete Linear Guide, for Motor drive, Top-mount support plate
Curve Systems, Guide Ring FR 500-360
Guide Roller, Centric bolt, Drawing dimensioned w/ round shaft
Curve Systems, Support Plate MR210 MR416
Support Plates with mounting Holes
Mounting Element PM
AG..M Complete Linear Guide, for Motor drive, Top-mount support plate, G20 rails
Square Flange
Support Rollers, Concentric bolt
Cross Table support Plates
Complete Linear Guide, Screw / spndle driven
Guide Roller without Bolt
AD..MLAT Complete Linear Guide, for Motor drive, Side-mount support plate
Guide Roller, Centric bolt, Drawing dimensioned w/ hexagon shaft
Support Rollers, Eccentric bolt
AG..CR Rack-driven Linear System, G20 rails
Lista de los catálogos de componentes en 3D disponibles en el portal de CAD http://www.tracepartsonline.net
http://www.tracepartsonline.net, Biblioteca gratuita de componentes CAD con planos 2D y modelos 3D para ADEM | Alibre Design | Architectural Desktop | AutoCAD | CADCEUS | CADISON |CADdy | CadKey | Cadra | CATIA | Cimatron | CoCreate | Helix | HiCAD | Ideas | IntelliCAD | Inventor | IronCAD | KeyCreator | KOMPAS | LogoCAD | Mastercam | Mechanical Desktop | Medusa |MegaCAD | MicroStation | NX | One Space Designer | Pro/ENGINEER | Solid Designer | Solid Edge | SolidThinking | SolidWorks | SpaceClaim | thinkdesign | TopSolid | TurboCAD | Unigraphics |Vectorworks | VISI | VX …
Page 20/23
AG Linear System
Curve Systems, Support Plate with Bogie MRD210
AS Linear System
Guide Rails
Curve Systems, Guide Ring FR 500-360
Support Profile
Mounting Element ML
Guide Roller, Eccentric bolt, Drawing dimensioned w/ hexagon shaft
Drive Shaft
Curve Systems, Support Plate with Bogie MRD416
Guide Roller, Eccentric bolt, Drawing dimensioned w/ round shaft
AD Linear System
Mounting Element LAK
Adapterplate LAK
Support Plates
AG..MLAT Complete Linear Guide, for Motor drive, Side-mount support plate, G20 rails
DualVee® system
DUALVee ® Guide Rollers with bolt
DUALVee ® Guide Rails
DUALVee ® Concentric and Eccentric Adapter Bushing
DUALVee ® Guide Rollers
Lintrek Linear system
LinTrek Concentric and Eccentric Adapter Bushing
LinTrek Guide Rollers
Lista de los catálogos de componentes en 3D disponibles en el portal de CAD http://www.tracepartsonline.net
http://www.tracepartsonline.net, Biblioteca gratuita de componentes CAD con planos 2D y modelos 3D para ADEM | Alibre Design | Architectural Desktop | AutoCAD | CADCEUS | CADISON |CADdy | CadKey | Cadra | CATIA | Cimatron | CoCreate | Helix | HiCAD | Ideas | IntelliCAD | Inventor | IronCAD | KeyCreator | KOMPAS | LogoCAD | Mastercam | Mechanical Desktop | Medusa |MegaCAD | MicroStation | NX | One Space Designer | Pro/ENGINEER | Solid Designer | Solid Edge | SolidThinking | SolidWorks | SpaceClaim | thinkdesign | TopSolid | TurboCAD | Unigraphics |Vectorworks | VISI | VX …
Page 21/23
LinTrek Guide Rails
LinRace
LinRace ball screw guide LRS
LinRace ball screw LRF
Heavy duty roller guide system
Support Rollers with Concentric bolt
Flange Rollers with Eccentric bolt
Prism Rail, type MTV
Giude Rollers with Eccentric bolt
Prism Rail, type MTV
Mounting Bolt
Guide rollers with Concentric bolt
Support Rollers without bolt
Flange Rollers without bolt
Flange Rollers with Concentric bolt
Flat Rail Type MTV
Support Rollers with Eccentric bolt
Giude Rollers without bolt
Heavy duty slide system (plastic slide elements)
Guide Rails GFS with integrated Spacer Rail
Spacer Piece GFD
System GLBO
Guide Block GFWP
Guide Block GFW-1-39
Lista de los catálogos de componentes en 3D disponibles en el portal de CAD http://www.tracepartsonline.net
http://www.tracepartsonline.net, Biblioteca gratuita de componentes CAD con planos 2D y modelos 3D para ADEM | Alibre Design | Architectural Desktop | AutoCAD | CADCEUS | CADISON |CADdy | CadKey | Cadra | CATIA | Cimatron | CoCreate | Helix | HiCAD | Ideas | IntelliCAD | Inventor | IronCAD | KeyCreator | KOMPAS | LogoCAD | Mastercam | Mechanical Desktop | Medusa |MegaCAD | MicroStation | NX | One Space Designer | Pro/ENGINEER | Solid Designer | Solid Edge | SolidThinking | SolidWorks | SpaceClaim | thinkdesign | TopSolid | TurboCAD | Unigraphics |Vectorworks | VISI | VX …
Page 22/23
System GF_1
Guide Bushing GLBG, closed Type
Sliding Element GFG
System GFG
Guide Rails GFS
Guide Block GFW-4-78
Guide Block GFW-2-48
Stripping Elements GFA
Guide Bushing GLBO, open Type
Axial Joint Bearing GAG
Precision shafts WRA, corrosion-resistant, hardened and polished, X90CrMoV18 [1.4112], Hardness: 55 ± 2 HRC
System GF_P
System GLBG
Guide Rails GFSP
System GF_3
System GF_2
Guide Block GFW-0-29
Clamping Element GFK
Spacer Rails GFD
Guide Block GFW-3-68
System GF_4
System GF_0
Lista de los catálogos de componentes en 3D disponibles en el portal de CAD http://www.tracepartsonline.net
http://www.tracepartsonline.net, Biblioteca gratuita de componentes CAD con planos 2D y modelos 3D para ADEM | Alibre Design | Architectural Desktop | AutoCAD | CADCEUS | CADISON |CADdy | CadKey | Cadra | CATIA | Cimatron | CoCreate | Helix | HiCAD | Ideas | IntelliCAD | Inventor | IronCAD | KeyCreator | KOMPAS | LogoCAD | Mastercam | Mechanical Desktop | Medusa |MegaCAD | MicroStation | NX | One Space Designer | Pro/ENGINEER | Solid Designer | Solid Edge | SolidThinking | SolidWorks | SpaceClaim | thinkdesign | TopSolid | TurboCAD | Unigraphics |Vectorworks | VISI | VX …
Page 23/23
Precision shafts WRB, corrosion-resistant, hardened and polished, X46Cr13 [1.4034], Hardness: 55 ± 2 HRC
Precision shafts W, hardened and polished, Cf53 heat treated steel, hardness: 55 - 62 ±2 HRC
Precision shafts WV, hardened, polished and chrome-plated, Cf53 heat treated steel, hardness: 55 - 62 ±2 HRC, plating layer thickness: 5 - 20 µm
Precision round shaft
Precision shafts WRA, corrosion-resistant, hardened and polished, X90CrMoV18 [1.4112], Hardness: 55 ± 2 HRC
Precision shafts WRB, corrosion-resistant, hardened and polished, X46Cr13 [1.4034], Hardness: 55 ± 2 HRC
Precision shafts W, hardened and polished, Cf53 heat treated steel, hardness: 55 - 62 ±2 HRC
Spherical bushing, light series, closed, groved and open version, Manufacturer: Hiwin
Precision shafts, hardened and polished, with radial bores for mounting on support profile
Shaft supports, Aluminum, with or without mounting bores
Precision shafts WV, hardened, polished and chrome-plated, Cf53 heat treated steel, hardness: 55 - 62 ±2 HRC, plating layer thickness: 5 - 20 µm
Shaft blocks, Aluminum, groved version, Series FGWH, FGWN
Linear bearing block, standard series
Spherical bushing, heavy series, closed, groved and open version, Manufacturer: Hiwin
Shaft blocks, Aluminum, groved version, Series FGWA
Cam followers
Cam Rollers with Crowned Outer Ring
Combined bearings
Combined Bearings, with Relubrication port
Ball Screws
Flange nuts
RSU single flange nut
RSW single flange nut
FSE single flange Nut
FSU (DIN69051) Single flange Nut