SPUTTERING TARGETS AND MATERIALS Kurt J. Lesker Co., Clairton, Pa.
Kurt J. Lesker Co. announces its next generation of Torus Linear Industrial Sputtering Sources. These sources are ideally suited for high-volume coating applications due to their excellent target utilization (40-50%) and high-power densities (>500 W/in2 for the direct-cooled version). The sources accept targets 5 in. wide by % in. thick and are available in lengths from 12 to 60 in.
Circle 164 on reader Information card
PVD COATING Multi-Arc Inc., Rockaway, N.J. Multi-Are's PVD Ultracast coating for die casting applications is the fi:r:st coating designed to exceed the demanding requirements of the die casting industry. The superior corrosion resistance and thermal stability of Ultracast enable it to provide superior soldering protection 'even in high-heat areas and in front of gates. Its high hardness also reduces washout on surfaces exposed to high-molten metal flow rates. Ultracast is recommended for aluminum, zinc, and magnesium die casting applications.
Circle 166 on reader information card •
III-..........u-=- TIll ........ IlATDlALS Target Materials Inc., Columbus, Ohio
Target Materials manufactures a vast array of metals, ceramics, and alloys for sputtering targets, evaporation sources, and other thin-film materials in virtually any customer-defined configuration. TMI serves many industrial coating applications as well as numerous R&D applications.
Circle 185 on reader information card
VACIIUM coa ......... ~ Delta V Technologies, Tucson, Ariz.
Delta V Technologies designs and builds custom vacuum coating equipment and process technology. The company has a proven expertise in the area of multiple-chamber machines for the development and/or manufacture of multiprocess, multilayer products. Examples of available One-Pass process technologies include plasma surface treatment, metal evaporation, inorganic reactive sputtering, and organic (polymer) coating.
Cirde 167 on reader information card
Chromium Plating by R. Weiner and A . Walmsley 239 pages S 115.00
A thorough and well-written hook on both decorative and engineering (hard) chromium plating, it will he of interest to anyone engaged in production chromium plating and also to students, researchers, and design engineers. Anyone contemplating the installation of chromium plating facilities will find it of special value.
Send Orders to:
METAL FINISHING, 660 White Plains Rd., Tarrytown, NY 10591·5153 For faster service, call (914) 333·2578 or FAX your order to (914) 333·2570
All book orders must b(, pn·p.litI. Pll',l\C indudt, S~ .OO shipping ;md hJndling for delivrry of C'lch book. vi~ UPS to lddrns.e"i in the" U.S., $10.00 for ('.&(h book shipped fxpress co Cuucia; and s~o.oo for t'Jch book .. hipp~d t'xpre\\ In .111 olh~1' cQlImrif's.
30 Metal Flnllhlng