5
SQ-1 ROOF TRUSS INTELLIGENT GANTRY BR-SQ-GA-1710
SQ-1 ROOF TRUSS
INTELLIGENT
GANTRY
BR-SQ-GA-1710
• Operator controls are mounted on the Clear View platform for maxi-mum visibility
• A pushbutton or touchscreen HMI controls the direction of machine
• Pushbutton or touchscreen HMI controls the Ejectors as well
• Preset nail plates into roof trusses us-ing a table layout & pressing system
• Increase production over hydraulic presses
• Increase production with audible and visual indicators to minimize down-time
866-647-7771 [email protected] www.Square1Design.com
PURPOSE
PROCEDURE
FOOTPRINT
866-647-7771 [email protected] www.Square1Design.com
SPECIFICATIONS
Electrical Specifications
• Horsepower: 20 or 15
• Voltage: Amps
208 60 HZ 40.2
230 60 HZ 36.2
460 60 HZ 18
415 50 HZ 19.8
• E-stop with interlock
• Photo electric sensor e-stops, safety
bar, or safety scanner emergency
Stop
Pneumatic Specifications
• Air requirements: NA
Mechanical Specifications
• High Torque Speed: 120 FPM
• High Travel Speed: 160 FPM
• Operators Required: Momentary
operation,
• Support: Phone
Onsite ($)
• Weight: 8,500 lbs.
• Double row spherical roller bearings
• Heavy duty steel roll 24" diameter with 7/8" wall thickness
• 4” stub shaft diameter
• #80 chain drive system
• Dual Motors
• 8 - bogie wheels with easy adjustment screws
• Four Urethane Drive wheels mechanically connected to two 10 HP or 7.5 HP gear motors with failsafe brakes
• Dual braking gear motors
• 10 horsepower (total of 20HP)
• Soft start inverter package with Easy Id Software
• 12 month warranty
Electrical Specifications
• Visitronics Touchscreen PLC providing:
• Magnetek radio frequency transmitter capabilities
• Infinite pneumatic ejector selections
• Operator defined ejector area
• Wireless remote operation, eliminating cabling
• Onscreen diagnostics
• Production metrics*
• Records number of trusses completed per shift/day/week
• Records lineal footage completed per shift/day/week
• Visual and audible alerts when gantry idles past preset time (preset 15 minutes)
• ~Optional SMS/email messaging alerts of production breakdowns and accomplishments
866-647-7771 [email protected] www.Square1Design.com
SPECIFICATIONS
Table Mounted Conductor Rail & Trolley
OPTIONS
ADDITIONAL REASONS
TO PURCHASE
• 15 HP motor downgrade
• Available in 10’, 12’, 14’, 15’ and 16’ lengths
• Roll height adjustment
• Solid lubrication, lubricated for the life of the bearing
• Walk beside pendent
• Radio frequency remote controls
• Customizations available
866-647-7771 [email protected] www.Square1Design.com
• Gantry and table design allow for easy relocation as a self contained unit
• 112 gallons compressed air storage capacity per 24’ of table
• 336 gallons compressed air storage capacity per 96’ of table
• No air hoses or track are near the floor to promote a clean work environment
• CNC cut steel frame minimizes fasteners and components available for breakdown
