+ All Categories
Home > Documents > SRA Lab Safety & Proposal PowerPoint Project This is a Partnered/Group Assignment Tech Ed - 9 Lab...

SRA Lab Safety & Proposal PowerPoint Project This is a Partnered/Group Assignment Tech Ed - 9 Lab...

Date post: 28-Dec-2015
Category:
Upload: shawn-dorsey
View: 216 times
Download: 2 times
Share this document with a friend
Popular Tags:
29
SRA Lab Safety & Proposal PowerPoint Project This is a Partnered/Group Assignment Tech Ed - 9 Lab Safety & SRA Proposal Report Mr. Saunders Remember: This will be part of you Final Exam Evaluation!!!
Transcript

SRA Lab Safety & ProposalPowerPoint Project

This is a Partnered/Group Assignment

Tech Ed - 9 Lab Safety & SRA Proposal Report Mr. Saunders

Remember: This will be part of you Final Exam Evaluation!!!

• Prepare a four to six minute PowerPoint presentation of your proposal.

• *All design team members must participate in the presentation.

• ***Open a PowerPoint presentation** Save it on your “H” Drive in your Tech-Ed folder that you have made.

• • Name it “______And______’s Lab Safety & SRA Proposal

Report “ • • A working partner must do the same thing…. save it in two

places

Layout: Slide #1 (Title Slide)

• Title This Slide with: Lab Safety & SRA Proposal Report

• Include Your Name(s), Date, and a Graphic.

Slide #2 (Table of Contents )

• 5 main areas = check your notes below and include all the items listed ther

– Personal Safety In The Production Lab– Using Hand Tools– Using Portable Power Tools– Using Machinery– The Proposal

By Becky, Jessica and By Becky, Jessica and SamanthaSamantha

Term 2 Winter 2005/06Term 2 Winter 2005/06

Table of ContentsPersonal Safety in the Production Personal Safety in the Production

LabLab

Using Hand ToolsUsing Hand Tools

Using Portable Power ToolsUsing Portable Power Tools

Using MachineryUsing Machinery

The ProposalThe Proposal

Slide #3-#24.

• Each slide from this one forward will be related to slide #2 and will be eventually hyperlinked to it.

• Work on each area and find Internet sites and information related to safety for the listed presentation topics.

• Create a slide for each topic listed. Provide a title, a picture along with a short description of it’s use and safety.

• Use Hyperlinks, animation, sound, graphics (jpeg), Video (mpeg), etc.

• Slide #25 - #30 The Proposal

• Last Slide #30 References

(Cite your sources here, www and others)

5 Main Areas & Topics

1) Personal Safety In The Production Lab

• Explore what is available for a person’s protection while working in a shop or lab.

Personal SafetySome safety hints we have are:

Wear your safety goggles when around machinery.

• If you have long hair keep it tied up.

• Stay by the machines until they’ve stopped completely.

• Don’t wear clothing that’s too loose.

• If you don’t know how to work a machine ask for help.

2) Using Hand Tools

1. Measuring Tools

2. Wrenches and Screwdrivers

3. Metalworking Tools

3) Using Portable Power Tools

1. Hot Glue guns

2. Pneumatic Tools

3. Electric Drills

4. Jig Saws

5. Circular Saws

6. Routers

7. Electric Sanders

Portable hand tools

• Hot Glue Gun• Pneumatic Tools• Electric Drills• Jig Saws• Circular Saws• Routers• Electric sanders

Jig Saws

• A jig saw works the same way as a scroll saw, the blade goes in a up and down.

• You can use jig saws to cut inside and outside cuts.

• Keep the jig saw flat on the surface of the material you are cutting.

4) Using Machinery

1. Drill Press2. Band Saw3. Jointer 4. Thickness Planer5. Compound Mitre Saw6. Table Saw7. Belt and Disk Sander8. Grinder9. Scroll Saw

Compound Mitre Saw

• Also know as the chop saw

• A rotating blade similar to the circular saw is used to cut the wood.

• Have wood in position before turning on the mitre saw.

5) The ProposalThe Proposal should include:

• Digital Pictures documenting the construction process

• Video Demonstration of your SRA

• Description of any hydraulic, mechanical and electrical systems

• The Program

• Be sure to describe the problem and the solution

• Include recommendations for improvement

The Proposal

• The problem & the solution

• Pictures

• Video Demonstration

• Mechanical System

• Hydraulic system

• Electrical system

• The program

• The problem was to design a robot that could move a “doit” from point A to Point B, that are at least 10 cm apart and a different of 10 cm in high.

• Our solution was to make an articulated robot that uses syringes and has a DC circuit that raises a flag when the “doit” drops into a hole (Point B).

• Our Solution follows all guide lines and works well to move the “doit”.

The problem & The Solution

Pictures of ProductionWe started making our robotic arm

by cutting and sanding the

pieces of wood for the

frame.

We then added the

tray to catch the ball in.

After that we made the

arm.

More Pictures Of productionAfter we finished

assembling the arm we added the

syringes and hooked up

the DC circuit. We added food coloring to

the syringes. Then took it

to the painting

booth and painted it black and

pink.

Video Demonstration

Robot Arm Video!! DC Circuit Video!!

Mechanical System

• Our mechanical system is very simple, designed for easy use.

• The SRA is an articulated robot, that uses four sets of hydraulics to move the arm from side to side, up and down, and to open and close the claw.

• The hydraulics use colored water to push the robot to move it.

Hydraulic system • Our hydraulic system uses four pairs of hydraulics( 8 syringes).

• The blue syringe controls the claw opening and closing it to pick up the ball.

• The Green one is to move the arm up and down to pick up the ball from the platform

• The red and the purple syringes are to move the arm from point A to point B. The purple syringe pushes the arm to point B and the red syringe pushes the arm back to point A

Electrical System

• Our electrical is a battery that powers a motor to rise our flag up our flag pole.

• By attaching a piece of fishing wire to a flag then though a hole in a flag pole, you can connect it to a motor.

Our DC circuit flag!

The program• First start by opening the claw by pulling the blue

syringe. Then close it on the object you are picking up by pushing the blue syringe.

• Push and hold the green syringe in will pushing the purple syringe to move the arm over the opening to drop the object (point B).

• Carefully lower the arm by pulling the green syringe. Then releasing the object by pulling the blue syringe.

• The object should drop into the hole, rising the flag.

• To move arm back to point A. raise the arm by pressing and holding the green syringe and then push the red syringe to you move the arm to point A.

Some Websites to help you get started:

• www.general.ca

• www.sawdustmaking.com

• http://www.geocities.com/pshreen2002/ProductionLabSafety.html


Recommended