SpecificationsModel SRW6UDP Rack Spaces 6U Equipment Mounting Depth Up to 20.5 in. / 521 mmLoad Rating* 200 lb. / 90.7 kgUnit Dimensions (H x W x D) 14.58 x 23.62 x 21.65 in. / 370 x 600 x 550 mmShipping Dimensions (H x W x D) 19.29 x 28.75 x 26.57 in. / 490 x 730 x 675 mmUnit Weight 45.2 lb. / 20.5 kgShipping Weight 48.5. lb. / 22 kgStandards Tested to UL/EN 60950-1, IEC 60297-3-100, CSA, IP20, ECA/EIA-310-E, GOST, NOM, RoHS, PCI-DSS * The load rating includes the combined weight of the unit and installed equipment. The unit must be
mounted to a stable surface with user-supplied anchors capable of bearing the full load.
MODEL:
SRW6UDPSmartRack® Deep Wall-Mount Rack Enclosure
6 Rack Units 200 lb.Load Rating
Removable Side Panels
Standard 19” Rack Width
Convenient Cable Access
Adjustable Mounting Rails
Ventilated for Ample Airflow
Reversible Door
Square-Hole or Threaded-Hole
Mounting
• Provide convenient, locking storage for equipment that should be off the floor, out of the way and secure
• Reversible cabinet allows installers to reverse door swing by rotating the unit 180° before mounting
• Dual-purpose rails accommodate square-hole mounting or threaded-hole mounting
SEE NEXT PAGE FOR DETAILED UNIT MEASUREMENTS
A Front Door (Lockable/Removable/Reversible)
B Dual-Purpose Mounting Rails (4) (Square- or Threaded-Hole Mounting)
C Side Panels (2) (Lockable/Removable)
D Mounting Plate (Removable. Includes mounting hooks for cabinet.)
E Cable Access Port Covers (2) (Removable)
F Ventilation Fan Ports (4) (Support optional SRFANWM fan kit.)
G Keys (2)
Also Includes: Owner’s manual, mounting plate screws (3), cabinet ground screw, pre-installed front door ground wire and rack-mount equipment mounting hardware (12 cage nuts, 12 mounting screws, 12 nylon cup washers).
1111 W. 35th Street Chicago, IL 60609 USA 773.869.1234 www.tripplite.com
6U EIA310-E200
6
A
B
C
C
F
GFloor-Standing Installation: Optional SRCASTER kit adapts cabinet to roll under desks, tables or counters. (Includes 4 casters.)
F
B
B
E
E
D
[471.54]18.56
[531.40]20.92
[59.86]2.36
CROSS SECTION AUSABLE MOUNTING DEPTH
TOP/BOTTOM VIEW
SIDE VIEW
TOP VIEW
225º
REAR VIEW (FRONT DOOR NOT SHOWN)
MOUNTING PLATE
FRONT VIEW
[270]10.63
[65]2.56
[550]21.65
[563.3]22.18
[550]21.65
[410.8]16.17
[563.3]22.18
[530]20.87
[550]21.65
[500]19.71
[455]17.91
[600]23.63
[49]1.92
[370.3]14.58
[26]1.02
[71]2.80
[289.9]11.41
[270]10.64
[50]1.97
[1148.3]45.22
[585]23.04
[37]1.46
[70]2.75
[406]16.00
[70]2.75
[406]16.00
[1181]46.53
[370.3]14.58[289.8]
11.41 A A
[186]7.31
MOUNTING PLATE(SEE BELOW)
CABLE ACCESS
USER-SUPPLIED M8 OR 5/16” BOLTS ANCHOR
PLATE TO WALL
INCLUDED SCREWS SECURE HOOKS TO
CABINET
SEE CROSS SECTION A
Dimensions: [mm] INCHESTripp Lite has a policy of continuous improvement. Specifications are subject to change without notice.
Copyright © 2017 Tripp Lite. 17-02-038
MODEL:
SRW6UDP
1111 W. 35th Street Chicago, IL 60609 USA
773.869.1234 www.tripplite.com