Date post: | 03-Apr-2018 |
Category: |
Documents |
Upload: | giselle-isabel |
View: | 233 times |
Download: | 0 times |
of 18
7/28/2019 Ssh Manual
1/18
User Manual
for
SSH Gateway Service
Version 3.0
Date: 31st
August 2005
By ITS PolyU
7/28/2019 Ssh Manual
2/18
Preface
This manual provides information on how to install and setup SSH client in Microsoft Windowsenvironment.
This manual is prepared by Information Technology Services (ITS) of The Hong Kong
Polytechnic University.
1. Preparing for Install describes the hardware and software requirement for SSH client.2. Installing Software describes how to install the SSH client software.3. Configuration describes how to configure the SSH client to establish the connection to
PolyU Secure Shell Gateway.
4. Frequently Asked Questions lists the comment question and answer.After reading this manual, you will be able to access Academic Unix cluster members and othermachines inside/outside PolyU campus network by establishing a connection between your SSH
client and PolyU Secure Shell Gateway service. For more detail information, please visit SSHwebsite at http://www.ssh.com/
Important Note
The SSH TectiaTM
Client is non-commercial version and may not be used for any commercial
purpose.
7/28/2019 Ssh Manual
3/18
1. Preparing for Installation1.1.Hardware Requirement
z Pentium-class processorz 10 MB of available hard-disk spacez Monitor resolution of 800x600 or greater
1.2.Software Requirementz Microsoft Windows operating system (Windows 95, Windows 98, Windows ME,
Windows NT, or Windows 2000, XP)
http://www.microsoft.com/
1.3.Recommended SSH clientz SSH TectiaTM Client (Version 3.2.9 build 283 or above) [Non-Commercial Version]
http://www.ssh.com/support/downloads/secureshellwks/non-commercial.htmlz PuTTY (Release 0.54 or above)
http://www.chiark.greenend.org.uk/~sgtatham/putty/download.html
7/28/2019 Ssh Manual
4/18
2. Installing Software2.1.SSH TectiaTM Client (Release 0.54)
z Step 1 Start InstallShield WizardDouble click the downloaded SSH Tectia
TMClient software to start an
InstallShield Wizard. ClickNext button to step 2
Figure 2.1-1 InstallShield Wizard
z Step 2 License AgreementPlease read the license agreement carefully. Remind that this client is non-commercial version and may not be used for any commercial purpose. If you
accept all the terms, clickYes button to step 3. Otherwise, clickNo button to closethe installation
Figure 2.1-2 License Agreement
7/28/2019 Ssh Manual
5/18
z Step 3 Choose Destination LocationUse the default folder and clickNext to step 4
Figure 2.1-3 Destination Location
z Step 4 Select Program FolderUse the default folder and clickNext to step 5
Figure 2.1-4 Program Folder
7/28/2019 Ssh Manual
6/18
z Step 5 Select ComponentsUse the default-selected components and clickNext to step 6
Figure 2.1-5 InstallShield Wizard
z Step 6 Check Setup InformationCheck with selected settings. If you are satisfied with the settings, clickNext tostep 6
Figure 2.1-6 Check Setup Information
7/28/2019 Ssh Manual
7/18
z Step 7 Installation in progressInstallation in progress. It may take 5 minutes (depends on different machine).
Please wait until you see Setup Complete (Figure 2.1-8). ClickFinish to close
Figure 2.1-7 Installation in progress
Figure 2.1-8 Setup Complete
7/28/2019 Ssh Manual
8/18
2.2.PuTTYThere is no installation on using PuTTY on Windows platform. After downloadedPuTTY (the Telnet and SSH client itself), double click the downloaded file. PuTTY
Configuration shows as Figure 2.2-1.
Figure 2.1-7 Installation in progress
7/28/2019 Ssh Manual
9/18
3. Configuration3.1.SSH TectiaTM Client
z Step 1 Start SSH TectiaTM ClientDouble click the SSH Tectia
TMClient icon to start
Figure 3.1-1 SSH TectiaTM
Client
7/28/2019 Ssh Manual
10/18
z Step 2 Quick ConnectClick the left right hand cornerQuick Connect button (Figure 3.1-2). A Connect
to Remote Host (Figure 3.1-3) window will appear.
Figure 3.1-2 Quick Connect
Figure 3.1-3 Connect to Remote Host Window
7/28/2019 Ssh Manual
11/18
z Step 3 Setting for connect to PolyU Secure Shell Gateway serviceEnter the following setting. After that, clickConnect button. Host Name :hkpussh.polyu.edu.hk User Name : Your NetID Port Number :22 Authentication Method :
Figure 3.1-4 Default SSH remote hosts setting
z Step 4 Host IdentificationIf you are the first time to use/connect to PolyU Secure Shell Gateway service, you
need to accept the fingerprint of the SSH Gateway host. The accepted fingerprintwill save at your local host machine. ClickYes button to continuous.
Figure 3.1-5 Host Identification
z Step 5 PolyU Secure Shell Gateway service authorizationEnter (Figure 3.1-6). ClickYes button to continuous.
Figure 3.1-6 Authorization
7/28/2019 Ssh Manual
12/18
z Step 6 PolyU Secure Shell Gateway service menuFinished all the setting, PolyU Secure Shell Gateway service menu appear.
Figure 3.1-7 SSH Gateway service menu
z Step 7 How to use PolyU Secure Shell Gateway service menu Press option a or b or c to connect to General Computing Academic
Unix cluster (hkpu07, hkpu10 or hkpu23). Press option d or e to connect to Research Computing Academic Unix
cluster (hkpu11 or hkpu12). Press option f or g to connect to other machine that within PolyU campus
such as your departmental server. Use option f if you use domain name
service (DNS) or option g if you use internet protocol (IP) address as
connection. Please read the instruction carefully after you press the option. Press option h to display help screen. Press option x to disconnect PolyU Secure Shell Gateway service.
7/28/2019 Ssh Manual
13/18
3.2.PuTTYz Step 1 Start PuTTY
Double click the PuTTY icon to start
Figure 3.2-1 PuTTY
7/28/2019 Ssh Manual
14/18
z Step 2 Connection Protocol SettingSingle click SSH under Connection. On Preferred SSH protocol version,
choice 2 only
Figure 3.2-2 Connection Protocol
7/28/2019 Ssh Manual
15/18
z Step 3 Setting for connect to PolyU Secure Shell Gateway serviceEnter the following setting. After that, clickConnect button. Host Name (or IP address) : hkpussh.polyu.edu.hk Protocol : 22
Figure 3.2-3 Connection Protocol
7/28/2019 Ssh Manual
16/18
z Step 4 PolyU Secure Shell Gateway service authorizationEnter the following setting. After that, clickConnect button.
Enter and .
Figure 3.2-4 Authorization
7/28/2019 Ssh Manual
17/18
4. Frequently Asked Questions4.1.Installation Issues
How can I uninstall the SSH TectiaTM Client?Open your Windows Control Panel (by clicking the Start button and then clicking the
Control Panel option from the Settings menu). Double click on the Add/Remove
Programs icon, then select SSH Secure Shell, and follow the displayed instructions.
How can I uninstall the PuTTY Client?Simply to delete the downloaded PuTTY client
4.2.Connection Issues Does PolyU Secure Shell Gateway service support connecting from SSH protocol
version 1?
Not support.
Does PolyU Secure Shell Gateway service support FTP service?Not directly support.
Does PolyU Secure Shell Gateway service support tunneling service?Not support.
Does PolyU Secure Shell Gateway service support X11 Forwarding?Not support.
4.3.Technical Issues What ports does the SSH connection use?
SSH connection uses port 22 for the server, ports 1024 and higher for the client.
What type of terminal emulation is supported?The terminal emulation is compatible up to vt100 & vt220 standard.
What the function on SSH TectiaTM Clients toolbar?The important functions of the SSH TectiaTM Client can be activated accessed using
the basic toolbar and profiles toolbar. By default, the basic toolbar is located at the
top of the clients window and the profile tool bar is located user it. For more details,
please visit SSH website. (http://www.ssh.com/products/tectia/client)
Figure 4.3-1 Add Profile window
Figure 4.3-2 Add Profile window.
7/28/2019 Ssh Manual
18/18
How can I bookmark PolyU Secure Shell Gateway service in SSH TectiaTM Client?After you successful connect to SSH Gateway host, a small pop-up windows Add
Profile appear. You can enter the name on your bookmark and click Add to
Profiles. Next time when you want to connect again, simple use Profile to call the
connection.
Figure 4.3-3 Add Profile window
Figure 4.3-4 Using Profile