+ All Categories
Home > Documents > Ssim Impguide 03 1 Oct03

Ssim Impguide 03 1 Oct03

Date post: 10-Apr-2015
Category:
Upload: api-3845390
View: 1,478 times
Download: 12 times
Share this document with a friend
Description:
SSIM Implementation Guide\Slot MSG Forms 031003
147
STANDARD SCHEDULES INFORMATION MANUAL SSIM EDIFACT IMPLEMENTATION GUIDE SCHEDULING MESSAGES CONTAINS THE MOST CURRENT VERSION/RELEASE OF EACH MESSAGE UP TO AND INCLUDING VERSION 03 RELEASE 1 INTERNATIONAL AIR TRANSPORT ASSOCIATION
Transcript
Page 1: Ssim Impguide 03 1 Oct03

STANDARD SCHEDULES INFORMATION MANUAL SSIM

EDIFACT IMPLEMENTATION GUIDE SCHEDULING MESSAGES

CONTAINS THE MOST CURRENT VERSION/RELEASE OF EACH MESSAGE UP TO AND INCLUDING VERSION 03 RELEASE 1

INTERNATIONAL AIR TRANSPORT ASSOCIATION

Page 2: Ssim Impguide 03 1 Oct03

NOTICE DISCLAIMER. The information contained in this publication is subject to constant review in the light of changing government requirements and regulations. No subscriber or other reader should act on the basis of any such information without referring to applicable laws and regulations and/or without taking appropriate professional advice. Although every effort has been made to ensure accuracy, the International Air Transport Association shall not be held responsible for loss or damage caused by errors, omissions, misprints or misinterpretation of the contents hereof. Furthermore, the International Air Transport Association expressly disclaims all and any liability to any person, whether a purchaser of this publication or not, in respect of anything done or omitted, and the consequences of anything done or omitted, by any such person in reliance on the contents of this publication. No part of the Standard Schedules Information Manual EDIFACT Implementation Guide may be reproduced, recast, reformatted or transmitted in any form by any means, electronic or mechanical, including photocopying, recording or any information storage and retrieval system, without the prior written permission from:

Managing Director, IATA Distribution Services International Air Transport Association

800 Place Victoria P.O. Box 113

Montreal, Quebec Canada, H4Z 1M1

Standard Schedules Information Manual - EDIFACT Implementation Guide ISBN 92-9195-121-8 REF. 333-9178-07 SSIM EDIFACT Implementation Guide (version 03.1) © 2003 International Air Transport Association. All rights reserved. Montreal — Geneva

Page 3: Ssim Impguide 03 1 Oct03

ISSUE DATE: OCTOBER 2003 i

TABLE OF CONTENTS

PREFACE .............................................................................................................................................V

INTRODUCTION ................................................................................................................................VI

CHAPTER 1 – MINIMUM CONNECT TIME UPDATE (MCTUPD) MESSAGE .................................. 1

1.1 MESSAGE FUNCTION..........................................................................................................................................................1

1.2 RULES FOR MESSAGE CONSTRUCTION.......................................................................................................................1

1.3 MESSAGE BRANCHING DIAGRAM .................................................................................................................................2

1.4 EDIFACT SEGMENTS ..........................................................................................................................................................3

1.5 MESSAGE EXAMPLES.........................................................................................................................................................9

CHAPTER 2 – SCHEDULE AND TRANSPORT SERVICE ACKNOWLEDGEMENT (SKDACK) MESSAGE .......................................................................................................................................... 13

2.1 MESSAGE FUNCTION........................................................................................................................................................13

2.2 RULES FOR MESSAGE CONSTRUCTION.....................................................................................................................13

2.3 MESSAGE BRANCHING DIAGRAM ...............................................................................................................................13

2.4 EDIFACT SEGMENTS ........................................................................................................................................................14

2.5 MESSAGE EXAMPLES.......................................................................................................................................................17

CHAPTER 3 – AIRPORT COORDINATION/ADVICE (SKDSLT) MESSAGE ................................... 19

3.1 MESSAGE FUNCTION........................................................................................................................................................19

3.2 RULES FOR MESSAGE CONSTRUCTION.....................................................................................................................19

3.3 MESSAGE BRANCHING DIAGRAM ...............................................................................................................................19

3.4 EDIFACT SEGMENTS ........................................................................................................................................................20

3.5 MESSAGE EXAMPLES.......................................................................................................................................................27

Page 4: Ssim Impguide 03 1 Oct03

ISSUE DATE: OCTOBER 2003 ii

CHAPTER 4 — SCHEDULE UPDATE (SKDUPD) MESSAGE........................................................... 37

4.1 MESSAGE FUNCTION........................................................................................................................................................37

4.2 RULES FOR MESSAGE CONSTRUCTION.....................................................................................................................38

4.3 MESSAGE BRANCHING DIAGRAM ...............................................................................................................................39

4.4 EDIFACT SEGMENTS ........................................................................................................................................................41

4.5 MESSAGE EXAMPLES.......................................................................................................................................................56

CHAPTER 5 – SCHEDULE CANCELLATION (SKDUPD) MESSAGE .............................................. 59

5.1 MESSAGE FUNCTION........................................................................................................................................................59

5.2 RULES FOR MESSAGE CONSTRUCTION.....................................................................................................................59

5.3 MESSAGE BRANCHING DIAGRAM ...............................................................................................................................60

5.4 EDIFACT SEGMENTS ........................................................................................................................................................61

5.5 MESSAGE EXAMPLES.......................................................................................................................................................65

CHAPTER 6 – SCHEDULE INFORMATION REPEAT REQUEST (SKDUPD) MESSAGE ............... 67

6.1 MESSAGE FUNCTION........................................................................................................................................................67

6.2 RULES FOR MESSAGE CONSTRUCTION.....................................................................................................................67

6.3 MESSAGE BRANCHING DIAGRAM ...............................................................................................................................68

6.4 EDIFACT SEGMENTS ........................................................................................................................................................69

6.5 MESSAGE EXAMPLES.......................................................................................................................................................73

CHAPTER 7 –TRANSPORT SERVICE UPDATE (TRAUPD) MESSAGE .......................................... 75

7.1 MESSAGE FUNCTION........................................................................................................................................................75

7.2 RULES FOR MESSAGE CONSTRUCTION.....................................................................................................................75

7.3 MESSAGE BRANCHING DIAGRAM ...............................................................................................................................76

7.4 EDIFACT SEGMENTS ........................................................................................................................................................78

7.5 MESSAGE EXAMPLES.......................................................................................................................................................93

Page 5: Ssim Impguide 03 1 Oct03

ISSUE DATE: OCTOBER 2003 iii

CHAPTER 8 –TIME ZONE UPDATE (TIZUPD) MESSAGE.............................................................. 97

8.1 MESSAGE FUNCTION........................................................................................................................................................97

8.2 RULES FOR MESSAGE CONSTRUCTION.....................................................................................................................97

8.3 MESSAGE BRANCHING DIAGRAM ...............................................................................................................................97

8.4 EDIFACT SEGMENTS ........................................................................................................................................................98

8.5 MESSAGE EXAMPLES.....................................................................................................................................................101

APPENDIX A – SEGMENT DIRECTORY........................................................................................ 103

APPENDIX B – COMPOSITE DIRECTORY .................................................................................... 113

APPENDIX C – DATA ELEMENT DIRECTORY............................................................................. 121

APPENDIX D – CODE SET DIRECTORY........................................................................................ 129

Page 6: Ssim Impguide 03 1 Oct03

ISSUE DATE: OCTOBER 2003 iv

Page 7: Ssim Impguide 03 1 Oct03

ISSUE DATE: OCTOBER 2003 v

PREFACE

Any comments concerning this Manual should be addressed to the Manager, Passenger Standards Development, IATA, Montreal at: Telephone: +1 (514) 874 0202 (Ext. 3575) Fax: +1 (514) 874 1779 Teletype Address: YMQFDXB E-mail Address: [email protected] Copies of this publication are available from one of the addresses shown below. Orders from North America: Customer Service Representative Telephone: +1 (514) 390 6726 Fax: +1 (514) 874 9659 Orders from Europe, Africa & the Middle East: Customer Service Representative Telephone: +41 (22) 770 2751 Fax: +41 (22) 770 2674 Orders from Asia, Australasia & the Pacific: Customer Service Representative Telephone: + 65 239 7232 Fax: + 65 536 2620 For Internet orders: www.iataonline.com.

Page 8: Ssim Impguide 03 1 Oct03

ISSUE DATE: OCTOBER 2003 vi

INTRODUCTION

The purpose of this document is to describe the recommended usage of the Schedules Information Standards Committee (SISC) EDIFACT Message Standards. This document contains the latest versions of all the EDIFACT message standards agreed by the Schedules Information Standards Committee (SISC). These messages are intended to facilitate the exchange of data relevant to airline schedules processing. This document was developed, and will be maintained, by the Schedules Information Standards Committee (SISC) and the IATA Secretariat. DOCUMENT STRUCTURE MESSAGE FUNCTION A definition to describe the function of the message. RULES FOR MESSAGE CONSTRUCTION Provides a high level view of the type of data that is transmitted at the various segment levels. MESSAGE BRANCHING DIAGRAM A graphical representation of the hierarchy of a message. Each diagram indicates the status of segments and segment groupings together with the maximum number of occurrences for each segment and segment grouping. EDIFACT SEGMENTS Service segments (UIH/UIT) have been extracted from the EDIFACT Application Level Syntax Rules as documented in ISO 9735 Version 4 for use within the IATA Interactive EDIFACT standard environment. The EDIFACT segments section is presented on a segment-by-segment basis. The status for inclusion of the data elements is indicated by one of the following values: M (mandatory); C (conditional); or * (not used). MESSAGE EXAMPLES Each message contains examples of the message constructed using the IATA SISC EDIFACT message specifications and EDIFACT syntax. APPENDICES Appendix A, B, C, and D lists all of the components and code sets, in alphabetical/numerical order, which constitute the IATA SISC EDIFACT message standards

Page 9: Ssim Impguide 03 1 Oct03

ISSUE DATE: OCTOBER 2002 1

CHAPTER 1 – MINIMUM CONNECT TIME UPDATE (MCTUPD) MESSAGE

1.1 MESSAGE FUNCTION Purpose: To transmit airline minimum connecting times.

1.2 RULES FOR MESSAGE CONSTRUCTION

UIH M1 Message Header MSD M1 Message Action Details ORG M1 Originator of Request Details IFT C0-1 Free Text Group 1 M1-99

ODI M1 Origin and Destination Details IFT C0-9 Free Text Group 2 M1-9

PDT M1 Product Information Group 3 M1-999

DAT M1 Date and Time Details RTG C0-1 Routing Information PER C0-9 Date/Time/Period

IFT C0-9 Free Text Group 4 C1-999

STX M1 Status Details PRT C0-1 Terminal/Time Information

IMD C0-1 Item Description CNX C0-1 Connection Details

LCI C0-1 Location Information TRA C0-99 Transport Id. to be Updated/Cancelled EQP C0-99 Equipment Information

UIT M1 Message Trailer

Page 10: Ssim Impguide 03 1 Oct03

EDIFACT Implementation Guide – Scheduling Messages

ISSUE DATE: OCTOBER 2003 2

1.3 MESSAGE BRANCHING DIAGRAM

Level 0

Level 1

Level 2

Level 3

Level 4

UIHM1

MSDM1

ORGM1

IFTC1

UITM1

Gr.1M99ODIM1

Gr.2M9

PDTM1

Gr.3M999DATM1

IFTC9

MCTUPD - Minimum Connect Time Update

Gr.4C999STXM1

EQPC99

TRAC99

LCIC1

PERC9

CNXC1

IMDC1

PRTC1

IFTC9

RTGC1

Level 5

Page 11: Ssim Impguide 03 1 Oct03

Chapter 1 – Minimum Connect Time Update (MCTUPD) Message

ISSUE DATE: OCTOBER 2003 3

1.4 EDIFACT SEGMENTS

Segment ID and Name Data Element Tag and Name Data Format

Codes Status IATA Explanatory Notes UIH INTERACTIVE MESSAGE HEADER M

S306 INTERACTIVE MESSAGE IDENTIFIER M 0065 Message type M an..6 MCTUPD 0052 Message version number M an..3 00 0054 Message release number M an..3 2 0113 Message type sub-function identification * 0051 Controlling agency, coded C an..3 IA 0057 Association assigned code * 0340 INTERACTIVE MESSAGE REFERENCE NUMBER C an..35 Message Serial Number S302 DIALOGUE REFERENCE * 0300 Initiator control reference M an..35 0303 Initiator reference identification C an..35 0051 Controlling agency, coded C an..3 0304 Message subset release number C an..35 S301 STATUS OF THE TRANSFER — INTERACTIVE C 0320 Sender sequence number C n..6 Starts at 1 and is incremented by 1 for each transfer 1 0323 Transfer position, coded C a1 Continuation/End Code. C Continuation Code F End Code 0325 Duplicate indicator C a1 Set = D if the interchange is a duplicate, otherwise not used. S300 DATE AND/OR TIME OF INITIATION * 0338 Event date C n..8 0314 Event time C an..15 0336 Time offset C n4 0035 TEST INDICATOR C n1 Set =1 if the interchange is a test. MSD MESSAGE ACTION DETAILS M E972 MESSAGE PROCESSING DETAILS C 4025 Business function, coded C an..3 1 Air 1225 Message function, coded C an..3 S01 MCT Query S02 Complete Database Replacement S03 Complete Replacement for a single airport as defined in the

ODI segment S04 Add detail item S05 Change detail item S06 Delete detail item

Page 12: Ssim Impguide 03 1 Oct03

EDIFACT Implementation Guide – Scheduling Messages

ISSUE DATE: OCTOBER 2003 4

Segment ID and Name Data Element Tag and Name Data Format

Codes Status IATA Explanatory Notes 3055 Code list responsible agency, coded * * or set to “3’’ 1225 Message function, coded * 4343 RESPONSE TYPE, CODED * 4343 RESPONSE TYPE, CODED * ORG Originator of Request Details M E973 DELIVERING SYSTEM DETAILS C To specify the system and its location that originates or

delivers the message for a third party. 3036 Party name C an..35 Airline Designator. See IATA Airline Coding Directory for

code set. If more than three characters are used then it is assumed that the full company name is being specified. The full company name should be used when a duplicate IATA designator is in use for the specified company.

3225 Place/Location identification C an..25 See IATA Airline Coding Directory. IATA 3 letter city/airport code

3224 Place/Location name C an..70 Used only when a code does not exist E974 ORIGINATOR IDENTIFICATION DETAILS * 3197 Agent identification C an..9 3465 In-house identification C an..9 3197 Agent identification C an..9 3036 Party name C an..35 E975 LOCATION C 3225 Place/Location identification C an..25 See IATA Airline Coding Directory. IATA 3 letter

city/airport code 3224 Place/Location name C an..70 Used only when a code does not exist 3036 PARTY NAME * 3457 ORIGINATOR TYPE CODED * E976 ORIGINATOR DETAILS * 3207 Country, coded C an..3 6345 Currency, coded C an..3 3453 Language, coded C an..3 3503 ORIGINATORS AUTHORITY IDENTIFICATION * IFT Interactive Free Text C E971 FREE TEXT QUALIFICATION C 4451 Text Subject Qualifier M an..3 4473 Information type identification C an..4 4405 Status, coded * 3036 Party name * 3453 Language, coded * 4440 FREE TEXT C99 an..70 When used with code ZZZ in data element 4451, for

bilateral or internal information, the existing SSIM Data Element Identifiers in the 800 and 900 series may be used. In this case, the 800 or 900 series Data Element Identifier should be separated from the free format text by a slash (/). In case of coded text the involved parties should agree on a common code set.

Page 13: Ssim Impguide 03 1 Oct03

Chapter 1 – Minimum Connect Time Update (MCTUPD) Message

ISSUE DATE: OCTOBER 2003 5

Segment ID and Name Data Element Tag and Name Data Format

Codes Status IATA Explanatory Notes SG1 START M1-99 ODI Origin and Destination Details M 3225 PLACE/LOCATION IDENTIFICATION C an..25 Specifies the connection city or airport. See IATA Airline

Coding Directory. IATA 3 letter city/airport code. 3225 PLACE/LOCATION IDENTIFICATION * IFT Interactive Free Text C E971 FREE TEXT QUALIFICATION C 4451 Text Subject Qualifier M an..3 4473 Information type identification C an..4 4405 Status, coded * 3036 Party name * 3453 Language, coded * 4440 FREE TEXT C99 an..70 When used with code ZZZ in data element 4451, for

bilateral or internal information, the existing SSIM Data Element Identifiers in the 800 and 900 series may be used. In this case, the 800 or 900 series Data Element Identifier should be separated from the free format text by a slash (/). In case of coded text the involved parties should agree on a common code set.

SG2 START PDT Product Information M 7133 PRODUCT DETAILS QUALIFIER C an..3 Specifies the type of connection DD Domestic to Domestic connection DI Domestic to International connection ID International to Domestic connection II International to International connection IA Inter-Airport connection E996 PRODUCT DETAILS * 7037 Characteristic Identification M an..17 4510 Requested Information C an..3 7161 Special Services, coded C an..3 7009 Item Description Identification C an..7 7009 Item Description Identification C an..7 7009 Item Description Identification C an..7 SG3 START M1-999 DAT Date and Time Information M E688 DATE AND TIME DETAILS C99 2005 Date/Time/Period Qualifier M an..3 MCT Minimum connect time 9916 First Date * an..35 9918 First Time C n..4 Minimum connect time. In cases where the MCT differs

between that specified by the delivering carrier and that specified by the receiving carrier, the time specified by the receiving carrier will prevail.

2005 Date/Time/Period Qualifier * an..3 9918 First Time * n..4 8335 Movement Type, coded * an..3 3225 Place/Location Identification * an..25 RTG Routing Information C E316 PRODUCT LOCATION DETAILS C99 3225 Place/Location identification M2 an..25 Specifies the arrival and departure airport for an Inter-

airport connection. Use only for Inter Airport connections. See IATA Airline Coding Directory. IATA 3 letter city/airport code

3227 Place/Location qualifier * an..3

Page 14: Ssim Impguide 03 1 Oct03

EDIFACT Implementation Guide – Scheduling Messages

ISSUE DATE: OCTOBER 2003 6

Segment ID and Name Data Element Tag and Name Data Format

Codes Status IATA Explanatory Notes PER Date/Time/Period C9 E507 DATE/TIME/PERIOD M 2005 Date/time/period qualifier M an..3 D Discontinue date E Effective date 2380 Date/time/period C an..35 Use local dates. 2379 Date/time/period format qualifier * an..3 6072 FREQUENCY VALUE * n..9 6071 FREQUENCY QUALIFIER * an..3 1245 STATUS INDICATOR, CODED * an..3 IFT Interactive Free Text C9 E971 FREE TEXT QUALIFICATION C 4451 Text Subject Qualifier M an..3 4473 Information type identification C an..4 4405 Status, coded * 3036 Party name * 3453 Language, coded * 4440 FREE TEXT C99 an..70 When used with code ZZZ in data element 4451, for

bilateral or internal information, the existing SSIM Data Element Identifiers in the 800 and 900 series may be used. In this case, the 800 or 900 series Data Element Identifier should be separated from the free format text by a slash (/). In case of coded text the involved parties should agree on a common code set.

SG4 START C1-999 STX Status Details M E656 STATUS DETAILS M 1245 Status indicator, coded C an..3 Specifies that the information in subsequent segments

relates to arriving or departing passengers. A Arrival D Departure 1229 Action request/notification, coded * an..3 9015 Status type, coded * an..3 4440 Free text * an..70 E656 STATUS DETAILS * 1245 Status indicator, coded C an..3 1229 Action request/notification, coded C an..3 9015 Status type, coded C an..3 4440 Free text C an..70 PRT Terminal/Time Information C E517 LOCATION IDENTIFICATION * 3225 Place/Location identification M an..25 1131 Code list qualifier C an..3 3055 Code list responsible agency, coded C an..3 3224 Place/Location name C an..70 E362 TIME INFORMATION * 2002 First Time M n4 2002 Second Time C n4 9986 UTC/Local Time Variation C n4 2148 Date Variation C n1

Page 15: Ssim Impguide 03 1 Oct03

Chapter 1 – Minimum Connect Time Update (MCTUPD) Message

ISSUE DATE: OCTOBER 2003 7

Segment ID and Name Data Element Tag and Name Data Format

Codes Status IATA Explanatory Notes E362 TIME INFORMATION * 2002 First Time M n4 2002 Second Time C n4 9986 UTC/Local Time Variation C n4 2148 Date Variation C n1 E992 POSITION C 3223 Related place/location one identification C an..25 Arrival Passenger Terminal Identifier. See IATA Standard

Schedules Information Manual Appendix D for code set. 3223 Related place/location one identification * an..25 E992 POSITION 3223 Related place/location one identification C an..25 Departure Passenger Terminal Identifier. See IATA

Standard Schedules Information Manual Appendix D for code set.

3223 Related place/location one identification * an..25 IMD Item Description C 7077 ITEM DESCRIPTION TYPE, CODED C an..3 Specifies the category of aircraft. N Narrow body aircraft (single aisle) T Turbo - prop W Wide body aircraft (twin aisle) 7081 ITEM CHARACTERISTIC, CODED * an..3 E273 ITEM DESCRIPTION * 7009 Item description identification C an..7 1131 Code list qualifier C an..3 3055 Code list responsible agency, coded C an..3 7008 Item description C an..35 7008 Item description C an..35 3453 Language, coded C an..3 7383 SURFACE/LAYER INDICATOR, CODED * an..3 CNX Connection Details M E312 CONNECTION DETAILS M 3225 Place/location identification C an..25 Specifies the passenger origin or destination city or airport.

See IATA Airline Coding Directory. IATA 3 letter city/airport code.

9906 Company identification * an..35 9918 First time * n..4 9922 Second time * n..4 E312 CONNECTION DETAILS * 3225 Place/location identification C an..25 9906 Company identification C an..35 9918 First time C n..4 9922 Second time C n..4 LCI Location Information C E329 LOCATION C Specifies the passenger origin or destination country or

region. 3207 Country, coded C an..3 See IATA Airline Coding Directory. IATA 2 letter country

code.

Page 16: Ssim Impguide 03 1 Oct03

EDIFACT Implementation Guide – Scheduling Messages

ISSUE DATE: OCTOBER 2003 8

Segment ID and Name Data Element Tag and Name Data Format

Codes Status IATA Explanatory Notes 3229 Country sub-entity identification C an..9 3224 PLACE/LOCATION C an..17 AFR Africa (IATA TC2) CAR Caribbean (IATA TC1) CEM Central America (IATA TC1) EUR Europe (IATA TC2) JAK Japan/ Korea (IATA TC3) MDE Middle East (IATA TC2) NOA North America (IATA TC1) SAS South Asian Subcontinent (IATA TC3) SCH Schengen Agreement SEA South East Asia (IATA TC3) SOA South America (IATA TC1) SWP South West Pacific (IATA TC3) WRI Wright Amendment TRA Transport Identifier to be Updated/Cancelled C99 E988 COMPANY IDENTIFICATION M 3036 Party name M an..35 Airline Designator. See IATA Airline Coding Directory

for code set. If more than three characters are used then it is assumed that the full company name is being specified. The full company name should be used when a duplicate IATA designator is in use for the specified company.

3036 Party name * an..35 3036 Party name * an..35 E989 PRODUCT IDENTIFICATION DETAILS C9 7135 Product Identification M an..35 Use to specify a flight number. If a flight number range is

required, use E989 twice to state the first and last flight numbers in the range.

7037 Characteristic Identification * an..17 7139 Product Identification Characteristic * an..3 7009 Item Description Identification * an..7 7009 Item Description Identification * an..7 7009 Item Description Identification * an..7 EQP Equipment Information C99 E220 MODE OF TRANSPORT * 8067 Mode of Transport, coded M an..3 8066 Mode of Transport C an..17 E360 EQUIPMENT IDENTIFICATION C 8179 Type of means of transport identification M an..8 Aircraft Type. See IATA Standard Schedules Information

Manual, Appendix A for code set. The normal aircraft hierarchy applies.

7139 Product Identification Characteristic * an..3 8212 Identification of the means of transport * an..17 8260 Equipment Identification Number * an..17 E988 COMPANY IDENTIFICATION * 3036 Party name M an..35 3036 Party name C an..35 3036 Party name C an..35 SG4 END SG3 END SG2 END SG1 END UIT Interactive Message Trailer M 0340 INTERACTIVE MESSAGE REFERENCE NUMBER C an..35 Message Serial Number 0074 NUMBER OF SEGMENTS IN THE MESSAGE C n..10 Count includes UIH and UIT.

Page 17: Ssim Impguide 03 1 Oct03

Chapter 1 – Minimum Connect Time Update (MCTUPD) Message

ISSUE DATE: OCTOBER 2003 9

1.5 MESSAGE EXAMPLES Simple MCTs

UIH+MCTUPD:00:2::IA:144++1:F' MSD+1+S05' ORG+BA:LHR' ODI+MAN’ Manchester, UK PDT+DD’ Domestic to Domestic connections DAT+MCT::0030’ MCT is 30 minutes ODI+MAN’ Manchester, UK PDT+DI’ Domestic to International connections DAT+MCT::0040’ MCT is 40 minutes PER+E:01JAN01’ Effective from 1st January 2001 UIT+144+11'

Inter-Airport MCT

UIH+MCTUPD:00:2::IA:144++1:F' MSD+1+S05' ORG+BA:LHR' ODI+PAR’ Paris - city code PDT+IA’ Inter-Airport connections DAT+MCT::0095 MCT is 95 minutes …. RTG+CDG+ORY’ For passengers arriving CDG & departing ORY UIT+144+8'

Inter-Terminal MCT

UIH+MCTUPD:00:2::IA:144++1:F' MSD+1+S05' ORG+BA:LHR' ODI+LHR’ London Heathrow PDT+II’ International to International connections DAT+MCT::0060’ MCT is 60 minutes …. STX+A’ For passengers arriving …. PRT++++1’ At Terminal 1 …. STX+D’ And departing …. PRT++++4’ From Terminal 4 UIT+144+11'

Carrier dependent MCTs

UIH+MCTUPD:00:2::IA:144++1:F' MSD+1+S05' ORG+BA:LHR' ODI+YUL’ Montreal Dorval PDT+DD’ Domestic to Domestic connections DAT+MCT::0045’ MCT is 45 minutes …. STX+A’ For passengers arriving …. TRA+AC’ With carrier AC ….

Page 18: Ssim Impguide 03 1 Oct03

EDIFACT Implementation Guide – Scheduling Messages

ISSUE DATE: OCTOBER 2003 10

STX+D’ And departing …. TRA+PD’ With carrier PD …. TRA+YN’ Or carrier YN ODI+YUL’ Montreal Dorval PDT+DD’ Domestic to Domestic connections DAT+MCT::0025’ MCT is 25 minutes …. STX+A’ For passengers arriving …. TRA+AC+8100+8299’ On any flight in the range AC8100-AC8299 …. STX+D’ And departing …. TRA+AC+8700+8899’ On any flight in the range AC8700-AC8899 ODI+LON’ London - city code PDT+IA’ Inter-Airport connections DAT+MCT::0180’ MCT is 180 minutes …. RTG+LHR+LGW' For pax arriving at LHR and departing at LGW STX+D’ And departing …. TRA+BA’ With carrier BA …. TRA+QF’ Or carrier QF UIT+144+26'

Origin or destination dependent MCTs

UIH+MCTUPD:00:2::IA:144++1:F' MSD+1+S05' ORG+BA:LHR' ODI+PHL’ Philadelphia PDT+ID’ International to Domestic connections DAT+MCT::0025’ MCT is 25 minutes …. STX+A’ For passengers arriving … CNX+YUL’ From Montreal Dorval …. TRA+US’ With carrier US …. STX+D’ And departing …. CNX+NAS’ To Nassau …. TRA+US’ With carrier US ODI+LHR’ London Heathrow PDT+II’ International to International connections DAT+MCT::0075’ MCT is 75 minutes …. STX+A’ For passengers arriving …. PRT++++1’ At Terminal 1 …. LCI+IE’ From Ireland …. TRA+BD’ With carrier BD …. STX+D’ And departing …. PRT++++4’ From Terminal 4 …. ODI+AMS’ Amsterdam PDT+DD’ Domestic to Domestic connections DAT+MCT::0040’ MCT is 40 minutes …. STX+A’ For passengers arriving …. LCI++EUROPE’ From anywhere within Europe …. STX+D’ And departing …. LCI++EUROPE’ To anywhere within Europe UIT+144+29'

Page 19: Ssim Impguide 03 1 Oct03

Chapter 1 – Minimum Connect Time Update (MCTUPD) Message

ISSUE DATE: OCTOBER 2003 11

Equipment dependent MCTs

UIH+MCTUPD:00:2::IA:144++1:F' MSD+1+S05' ORG+BA:LHR' ODI+SYD’ Sydney PDT+DI’ Domestic to International connections DAT+MCT::0150’ MCT is 150 minutes …. STX+A’ For passengers arriving …. TRA+AN’ With carrier AN …. EQP++BE1’ On aircraft type BE1 ODI+JFK’ New York JFK PDT+DI’ Domestic to International connections DAT+MCT::0050’ MCT is 50 minutes …. STX+A’ For passengers arriving …. IMD+N’ On narrow body (single aisle) aircraft …. TRA+AA’ With carrier AA …. STX+D’ And departing …. TRA+BA’ With carrier BA …. EQP++SSC’ On aircraft type SSC UIT+144+19'

A complex MCT

UIH+MCTUPD:00:2::IA:144++1:F' MSD+1+S05' ORG+BA:LHR' ODI+XXX’ An airport somewhere PDT+DI’ Domestic to International connections DAT+MCT::0055’ MCT is 55 minutes …. PER+E:15DEC00’ Effective from 15th December 2000 …. STX+A’ For passengers arriving …. PRT++++3’ At Terminal 3 …. IMD+W’ On wide body (twin aisle) aircraft …. CNX+ANC’ From Anchorage …. TRA+XX+3200+3314’ On any flight in the range XX3200-XX3314 …. TRA+YY+1765+1818’ Or any flight in the range YY1765-YY1818 …. STX+D’ And departing …. PRT++++1’ From Terminal 1 …. CNX+MAD’ To Madrid …. LCI+DE’ Or to anywhere in Germany …. TRA+ZZ’ With carrier ZZ …. TRA+YY+1234+1266’ Or any flight in the range YY1234-YY1266 …. EQP++320’ On aircraft type 320 …. EQP++737’ Or aircraft type 737 UIT+144+22'

Page 20: Ssim Impguide 03 1 Oct03

EDIFACT Implementation Guide – Scheduling Messages

ISSUE DATE: OCTOBER 2003 12

Intentionally left blank.

Page 21: Ssim Impguide 03 1 Oct03

ISSUE DATE: OCTOBER 2002 13

CHAPTER 2 – SCHEDULE AND TRANSPORT SERVICE ACKNOWLEDGEMENT (SKDACK) MESSAGE

2.1 MESSAGE FUNCTION Purpose: To acknowledge receipt of a Schedule Update, Schedule Cancellation or Transport Service Update Message, and specify whether it was processed successfully or identify any application errors which occurred. The Message will include all Mandatory Data Elements, and may include one or more Conditional Data Elements.

2.2 RULES FOR MESSAGE CONSTRUCTION

UIH M1 Message header MSD M1 Message action details Group 1 C1-999 ERI M1 Application error information IFT C0-1 Free Text UIT M1 Message trailer

2.3 MESSAGE BRANCHING DIAGRAM

UIHM1

MSDM1

UITM1

GR1C 999ERIM1

IFTC1

LEVEL 0

LEVEL 1

LEVEL 2

Page 22: Ssim Impguide 03 1 Oct03

EDIFACT Implementation Guide – Scheduling Messages

ISSUE DATE: OCTOBER 2003 14

2.4 EDIFACT SEGMENTS

Segment ID and Name Data Element Tag and Name Data Format

Codes Status IATA Explanatory Notes UIH INTERACTIVE MESSAGE HEADER M

S306 INTERACTIVE MESSAGE IDENTIFIER M 0065 Message type M an..6 SKDACK 0052 Message version number M an..3 00 0054 Message release number M an..3 2 0113 Message type sub-function identification * 0051 Controlling agency, coded C an..3 IA 0057 Association assigned code * 0340 INTERACTIVE MESSAGE REFERENCE NUMBER C an..35 Message Serial Number S302 DIALOGUE REFERENCE * 0300 Initiator control reference M an..35 0303 Initiator reference identification C an..35 0051 Controlling agency, coded C an..3 0304 Message subset release number C an..35 S301 STATUS OF THE TRANSFER — INTERACTIVE C 0320 Sender sequence number C n..6 Starts at 1 and is incremented by 1 for each transfer 1 0323 Transfer position, coded C a1 Continuation/End Code. C Continuation Code F End Code 0325 Duplicate indicator C a1 Set = D if the interchange is a duplicate, otherwise not used. S300 DATE AND/OR TIME OF INITIATION * 0338 Event date C n..8 0314 Event time C an..15 0336 Time offset C n4 0035 TEST INDICATOR C n1 Set =1 if the interchange is a test. MSD MESSAGE ACTION DETAILS M E972 MESSAGE PROCESSING DETAILS C 4025 Business function, coded C an..3 1 Air 1225 Message function, coded C an..3 3055 Code list responsible agency, coded, coded * Not used or set to “3” 1225 Message function, coded * 4343 RESPONSE TYPE, CODED C an..3 03 Successfully processed 06 Partially processed 07 Received but not processed 08 Received and rejected 4343 RESPONSE TYPE, CODED *

Page 23: Ssim Impguide 03 1 Oct03

Chapter 2 – Schedule and Transport Service Acknowledgement (SKDACK) Message

ISSUE DATE: OCTOBER 2003 15

Segment ID and Name Data Element Tag and Name Data Format

Codes Status IATA Explanatory Notes SG1 START C1-999 ERI APPLICATION ERROR INFORMATION M E901 APPLICATION ERROR DETAIL M 9321 Application error, coded M an..8 1 Invalid date 2 Invalid time 3 Invalid transfer sequence 4 Invalid City/Airport code 5 Invalid time mode 6 Invalid operational suffix 7 Invalid period of schedule validity 8 Invalid days of operation 9 Invalid frequency rate 10 Invalid service type code 11 Invalid aircraft type coded 12 Invalid product details qualifier coded 13 Invalid aircraft configuration/version coded 14 Invalid meal service note coded 15 Invalid UTC/local time variation 16 Invalid date variation 17 Invalid terminal coded 18 Invalid on-time performance indicator 19 Invalid type of call at port coded 20 Invalid Government action coded 21 Invalid facility type coded 22 Invalid Traffic Restriction coded 23 Invalid Traffic Restriction type coded 24 Invalid Traffic Restriction qualifier coded 25 Invalid transport stage qualifier coded 100 Invalid place of departure coded 101 Invalid place of destination coded 102 Invalid departure date 103 Invalid departure time 104 Invalid reservations booking designator 105 Invalid reservations booking modifier 107 Invalid airline designator 109 Invalid country code 112 Invalid requester identification 113 Invalid period of operation 114 Invalid flight number 115 Invalid arrival date 116 Invalid arrival time 120 Invalid action code 154 Message function invalid 156 Business function invalid 408 No more data available 409 Request is outside system data range 410 Flight does not operate due to weather, mechanical or other

operational conditions 417 Repeat request updating in progress 900 Inactivity time out value exceeded 901 Communications line unavailable 902 Prior message being processed 1131 Code list qualifier * 3055 Code list responsible agency, coded *

Page 24: Ssim Impguide 03 1 Oct03

EDIFACT Implementation Guide – Scheduling Messages

ISSUE DATE: OCTOBER 2003 16

Segment ID and Name Data Element Tag and Name Data Format

Codes Status IATA Explanatory Notes IFT Interactive Free Text C0-1 E971 FREE TEXT QUALIFICATION * 4451 Text Subject Qualifier M an..3 4473 Information type identification C an 4 4405 Status, coded * an..3 3036 Party name * an..35 3453 Language, coded * an..3 4440 FREE TEXT C99 an..70 When used with code ZZZ in data element 4451, for

bilateral or internal information, the existing SSIM Data Element Identifiers in the 800 and 900 series may be used. In this case, the 800 or 900 series Data Element Identifier should be separated from the free format text by a slash (/). In case of coded text the involved parties should agree on a common code set.

SG1 END UIT Interactive Message Trailer M 0340 INTERACTIVE MESSAGE REFERENCE NUMBER C an..35 Message Serial Number 0074 NUMBER OF SEGMENTS IN THE MESSAGE C n..10 Count includes UIH and UIT.

Page 25: Ssim Impguide 03 1 Oct03

Chapter 2 – Schedule and Transport Service Acknowledgement (SKDACK) Message

ISSUE DATE: OCTOBER 2003 17

2.5 MESSAGE EXAMPLES

UIB+UNOA:4+REF 123/449++++OAG:04+SR:04+970401:1225’ UIH+SKDACK:97:1::IA+1++1:F’ MSD+1+03’ Processed successfully UIT+1+3’ UIZ+REF 123/449+1’ UIB+UNOA:4+REF 123/449++++OAG:04+SR:04+970401:1225’ UIH+SKDACK:97:1::IA+1++1:F’ MSD+1+08’ Received and rejected ERI+4’ Invalid airport coded ERI+17’ Invalid terminal coded IFT++ANY TEXT’ Free text UIT+1+3’ UIZ+REF 123/449+1’

Page 26: Ssim Impguide 03 1 Oct03

EDIFACT Implementation Guide – Scheduling Messages

ISSUE DATE: OCTOBER 2003 18

Intentionally left blank.

Page 27: Ssim Impguide 03 1 Oct03

ISSUE DATE: OCTOBER 2002 19

CHAPTER 3 – AIRPORT COORDINATION/ADVICE (SKDSLT) MESSAGE

3.1 MESSAGE FUNCTION Purpose: To request, and to reply to requests for, flight clearances at Airports which require slot allocation; to provide Airport movement information to schedules facilitators; to request, and reply to requests for, information held by Airport Coordinators or schedules facilitators.

3.2 RULES FOR MESSAGE CONSTRUCTION

UIH M1 Message header MSD M1 Message action details ORG M1 Originator details HDR M1 Message header information IFT C0-1 Free Text Group 1 M1-99999

ACT M1 Action identification PRT M1 Airport/timings/terminals information PER C0-1 Period/frequency information EQS C0-1 Equipment/service information RTG C0-1 Routing information IFT C0-1 Free Text DAT C0-9 Date and Time information

UIT M1 Message trailer

3.3 MESSAGE BRANCHING DIAGRAM

U I HM 1 M 1 M 1 M 1 C 1

M S D O R G H D R I F T U I T

G R . 1M 9 9 9 9 9

M 1

C 1M 1 C 1 C 1 C 1

A C T

P R T P E R E Q S R T G I F T

M 1L E V E L 0

L E V E L 1

L E V E L 2

S K D S L T - A i r p o r t C o o r d in a t io n / A d v ic e

C 9D A T

Reference should be made to SSIM Chapter 6 for the general rules and principles involved in Airport Coordination/Advice procedures, which remain unchanged in the EDIFACT environment. PER, EQS and RTG are shown as conditional data segments, but their use is mandatory in all cases except when Action Codes ES, QS, QA or QD are being used in data element 1229 of the ACT segment. Action Codes QS, QA and QD may only be used when Message Functions SIR, SIE, WIR or WIE are being used in data element 1225 within composite data element E972 of the MSD segment. SIR/WIR and SIE/WIE differ in so far as SIR/WIR apply to requests by a Carrier for data pertaining to its own clearances, or schedule data, held by a Coordinator or Agent, and SIE/WIE apply to requests pertaining to schedule data held for other Carriers.

Page 28: Ssim Impguide 03 1 Oct03

EDIFACT Implementation Guide – Scheduling Messages

ISSUE DATE: OCTOBER 2003 20

3.4 EDIFACT SEGMENTS

Segment ID and Name Data Element Tag and Name Data Format

Codes Status IATA Explanatory Notes UIH INTERACTIVE MESSAGE HEADER M

S306 INTERACTIVE MESSAGE IDENTIFIER M 0065 Message type M an..6 SKDSLT 0052 Message version number M an..3 00 0054 Message release number M an..3 2 0113 Message type sub-function identification * 0051 Controlling agency, coded C an..3 IA 0057 Association assigned code * 0340 INTERACTIVE MESSAGE REFERENCE NUMBER C an..35 Message Serial Number S302 DIALOGUE REFERENCE * 0300 Initiator control reference M an..35 0303 Initiator reference identification C an..35 0051 Controlling agency, coded C an..3 0304 Message subset release number C an..35 S301 STATUS OF THE TRANSFER — INTERACTIVE C 0320 Sender sequence number C n..6 Starts at 1 and is incremented by 1 for each transfer 1 0323 Transfer position, coded C a1 Continuation/End Code. C Continuation Code F End Code 0325 Duplicate indicator C a1 Set = D if the interchange is a duplicate, otherwise not used. S300 DATE AND/OR TIME OF INITIATION * 0338 Event date C n..8 0314 Event time C an..15 0336 Time offset C n4 0035 TEST INDICATOR C n1 Set =1 if the interchange is a test. MSD MESSAGE ACTION DETAILS M E972 MESSAGE PROCESSING DETAILS C 4025 Business function, coded C an..3 1 Air 1225 Message function, coded C an..3 SAL Slot Preliminary Allocation List SAQ Slot/Schedule Availability Query SCR Slot Clearance Request/Reply SHL Slot Historical and Non-Historical Allocation List SIE Slot/Schedule Information Enquiry SIR Slot/Schedule Information Request/Reply SMA Schedule Movement Advice WCR Waitlist Change Request/Reply WIE Waitlist Information Enquiry WIR Waitlist Information Request/Reply 3055 Code list responsible agency, coded * * or set to “3’’ 1225 Message function, coded * 4343 RESPONSE TYPE, CODED * 4343 RESPONSE TYPE, CODED *

Page 29: Ssim Impguide 03 1 Oct03

Chapter 3 – Airport Coordination / Advice (SKDSLT) Message

ISSUE DATE: OCTOBER 2003 21

Segment ID and Name Data Element Tag and Name Data Format

Codes Status IATA Explanatory Notes ORG Originator of Request Details M E973 DELIVERING SYSTEM DETAILS C To specify the system and its location that originates or

delivers the message for a third party. 3036 Party name C an..35 Airline Designator. See IATA Airline Coding Directory for

code set. If more than three characters are used then it is assumed that the full company name is being specified. The full company name should be used when a duplicate IATA designator is in use for the specified company.

3225 Place/Location identification C an..25 See IATA Airline Coding Directory. IATA 3 letter city/airport code

3224 Place/Location name C an..70 Used only when a code does not exist E974 ORIGINATOR IDENTIFICATION DETAILS * 3197 Agent identification C an..9 3465 In-house identification C an..9 3197 Agent identification C an..9 3036 Party name C an..35 E975 LOCATION C 3225 Place/Location identification C an..25 See IATA Airline Coding Directory. IATA 3 letter

city/airport code 3224 Place/Location name C an..70 Used only when a code does not exist 3036 PARTY NAME * 3457 ORIGINATOR TYPE CODED * E976 ORIGINATOR DETAILS * 3207 Country, coded C an..3 6345 Currency, coded C an..3 3453 Language, coded C an..3 3503 ORIGINATORS AUTHORITY IDENTIFICATION * HDR Header information M 4405 STATUS, CODED M an..3 Schedule Status K Confirmed, Effective, Working, Firm, etc. P Provisional, Draft, Proposed, Subject to Change, etc. E507 DATE/TIME/PERIOD M 2005 Date/Time/Period qualifier M an..3 Time Mode, mandatory U UTC Time Mode 2380 Date/Time/Period * 2379 Date/Time/Period format qualifier * 1154 REFERENCE NUMBER C an..35 Creator’s Reference 2380 TIME/DATE/PERIOD *

Page 30: Ssim Impguide 03 1 Oct03

EDIFACT Implementation Guide – Scheduling Messages

ISSUE DATE: OCTOBER 2003 22

Segment ID and Name Data Element Tag and Name Data Format

Codes Status IATA Explanatory Notes 4440 FREE TEXT C an..70 7135 PRODUCT IDENTIFICATION * an..35 . 7135 PRODUCT IDENTIFICATION * IFT Interactive Free Text C0-1 E971 FREE TEXT QUALIFICATION C 4451 Text Subject Qualifier M an..3 SPH Special Handling 4473 Information type identification C an..4 SHB Handle as complete package – to be used with text subject

qualifier SPH SHS Handle as swap– to be used with text subject qualifier SPH SHW Handle as waitlist– to be used with text subject qualifier

SPH 4405 Status, coded * 3036 Party name * 3453 Language, coded * 4440 FREE TEXT C99 When used with code ZZZ in data element 4451, for

bilateral or internal information, the existing SSIM Data Element Identifiers in the 800 and 900 series may be used. In this case, the 800 or 900 series Data Element Identifier should be separated from the free format text by a slash (/). In case of coded text the involved parties should agree on a common code set. When used with Text Subject Qualifier code TFI in SKDSLT, the first instance of this data element refers to arrival time flexibility, and the second instance to departure time flexibility. Flexibility is stated using eight digits – the first four refer to earliest time and the last four to latest time of the flexibility range.

SG1 START M1-99999 ACT Action Identification M 1229 ACTION REQUEST/NOTIFICATION,

CODED M an..3 Action Code

AO Acceptance of an offer – no further improvement desired CH Schedule to be changed, or waitlist to be changed when

used with Message Function code WCR DS Delete schedule ES Eliminate schedule FS Historic schedule HH Holding IN Revised Schedule (Continuation from previous adjacent

Season), or Availability information when used with Message Function code SAQ

KK Confirmation LS Revised schedule (No offer acceptable) NE New Entrant status as stated in the EU Regulation 95/93 Art

2 b ii or as covered in local legislation that will have precedence.

NS New schedule, or new Waitlist Request when used with Message Function code WCR

NY New Entrant with year round status as stated in the EU Regulation 95/93 Art 2 b ii or as covered in local legislation that will have precedence.

OO Offer PP If used by Operator, means acceptance of an offer with

request to remain on waitlist. If used by Coordinator, means pending

QA Request for arrival schedule information QD Request for departure schedule information QS Request for schedule information

Page 31: Ssim Impguide 03 1 Oct03

Chapter 3 – Airport Coordination / Advice (SKDSLT) Message

ISSUE DATE: OCTOBER 2003 23

Segment ID and Name Data Element Tag and Name Data Format

Codes Status IATA Explanatory Notes RS Revised schedule (Offer acceptable), or revised Waitlist Request when

used with Message Function code WCR TS Allocated subject to conditions UU Refusal WW Unable to reconcile flight information XX Cancellation YY New schedule (Continuation from previous adjacent Season) ZZ Decline offer, or remove from Waitlist when used with Message

Function code WCR E988 COMPANY IDENTIFICATION C 3036 Party Name M3 an..35 Only the first occurrence of the data element is used, and it specifies the

Arrival Airline Designator. See IATA Airline Coding Directory for code set. If more than three characters are used then it is assumed that the full company name is being specified.

E989 PRODUCT IDENTIFICATION

DETAILS C

7135 Product Identification Arrival Flight Number 7037 Characteristic Identification * 7139 Product Identification Characteristic C an..3 Arrival Operational Suffix — single alpha character. 7009 Item Description Identification * E988 COMPANY IDENTIFICATION C 3036 Party Name M3 an..35 Only the first occurrence of the data element is used, and it specifies the

Departure Airline Designator. See IATA Airline Coding Directory for code set. If more than three characters are used then it is assumed that the full company name is being specified.

E989 PRODUCT IDENTIFICATION

DETAILS C

7135 Product Identification C an..35 Departure Flight Number. 7037 Characteristic Identification * 7139 Product Identification Characteristic C an..3 Departure Operational Suffix — single alpha character. 7009 Item Description Identification * E369 REASON INFORMATION C 9013 Status reason, coded M9 an..3 Coordinator’s Reason or Historic Slot Reason. The first instance of

segment E369 refers to the arriving flight, and the second instance refers to the departing flight. Multiple reasons may be given within each instance of the segment. The IFT Segment should be used if further clarification is required.

AA Apron capacity AB ATC restriction CF Curfew GA Gate capacity HA High security flight restriction MU Misuse of slots N80 Failure to use slots on at least 80% of occasions NA Night allocation NB Noise ban NE New Entrant status under the provisions of the EU Regulation 95/93 Art

2 b ii or as covered in local legislation NP No recognisable period PA Post SC coordination for ad hoc QT Quota limitations R05 Runway 5 minute limitation R10 Runway 10 minute limitation

Page 32: Ssim Impguide 03 1 Oct03

EDIFACT Implementation Guide – Scheduling Messages

ISSUE DATE: OCTOBER 2003 24

Segment ID and Name Data Element Tag and Name Data Format

Codes Status IATA Explanatory Notes R15 Runway 15 minute limitation R30 Runway 30 minute limitation R60 Runway 60 minute limitation RA Runway congestion SEC Security T10 Terminal congestion 10 minutes T15 Terminal congestion 15 minutes T30 Terminal congestion 30 minutes T60 Terminal congestion 60 minutes T2H Terminal congestion 2 hours T3H Terminal congestion 3 hours TA Terminal congestion UA Unable to allocate slot for miscellaneous reason PRT Terminal/Time Information M E517 LOCATION IDENTIFICATION M 3225 Place/Location identification M an..25 Station. See IATA Airline Coding Directory. IATA 3 letter city/airport

code. When used in SKDSLT message, this specifies the Clearance/Advice Airport.

1131 Code list qualifier * 3055 Code list responsible agency, coded * 3224 Place/Location name * E362 TIME INFORMATION C 2002 First Time M n4 Scheduled Time of Aircraft Arrival (STA). When used in SKDSLT

message, with Message Function code SIE or WIE, this data element is used to specify Start of Time Band.

2002 Second Time * 9986 UTC/Local Time Variation * 2148 Date Variation C n1 Date Variation of Scheduled Time of Aircraft Arrival. Variation is

assumed to be positive. If negative, use minus sign (-) before the numeric.

E362 TIME INFORMATION C 2002 First Time M n4 Scheduled Time of Aircraft Departure(STD). When used in SKDSLT

message, with Message Function code SIE or WIE, this data element is used to specify End of Time Band.

2002 Second Time * 9986 UTC/Local Time Variation * 2148 Date Variation C n1 Date Variation of Scheduled Time of Aircraft Departure. Variation is

assumed to be positive. If negative, use minus sign (-) before the numeric.

E992 POSITION C 3223 Related place/location one identification C an..25 Passenger Terminal Identifier — Arrival.

See SSIM Appendix D for code set. 3223 Related place/location one identification C an..25 Aircraft Terminal Identifier —Arrival.

See SSIM Appendix D for code set. E992 POSITION C 3223 Related place/location one identification C an..25 Passenger Terminal Identifier — Departure.

See SSIM Appendix D for code set. 3223 Related place/location one identification C an..25 Aircraft Terminal Identifier —Departure.

See SSIM Appendix D for code set.

Page 33: Ssim Impguide 03 1 Oct03

Chapter 3 – Airport Coordination / Advice (SKDSLT) Message

ISSUE DATE: OCTOBER 2003 25

Segment ID and Name Data Element Tag and Name Data Format

Codes Status IATA Explanatory Notes PER Date/Time/Period C0-1 E507 DATE/TIME/PERIOD M 2005 Date/time/period qualifier M an..3 Time Mode, mandatory. Must be the same as in the HDR Segment. U UTC Time Mode 2380 Date/time/period C an..35 Period of Operation, mandatory. When ad hoc change/

addition/cancellation is being specified, the Period of Operation must only cover a single date.

2379 Date/time/period format qualifier * 6072 FREQUENCY VALUE M n..9 Day(s) of Operation 6071 FREQUENCY QUALIFIER C an..3 Frequency Rate 1245 STATUS INDICATOR, CODED * EQS Equipment/Service Information C0-1 E359 EQUIPMENT INFORMATION C 8067 Mode of Transport, coded M an..3 Arrival Service Type code. See SSIM Appendix C for code set. 8179 Type of means of transport identification M an..8 Arrival Aircraft Type. See SSIM Appendix A for code set. 4510 Requested information M an..3 Number of Seats. Specification of total number of arrival seats. 9984 Type of Call at Port C n..3 1 Technical Landing E359 EQUIPMENT INFORMATION C 8067 Mode of Transport, coded M an..3 Departure Service Type code. See SSIM Appendix C for code set. 8179 Type of means of transport identification M an..8 Departure Aircraft Type. See SSIM Appendix A for code set. 4510 Requested information M an..3 Number of Seats. Specification of total number of departure seats. 9984 Type of Call at Port C n..3 1 Technical Landing E523 NUMBER OF UNIT DETAILS C 6350 Number of Units M n..15 Number of Passengers. Specification of number of arriving passengers

expected. 6353 Number of Units, qualifier M an..3 PX Number of seats occupied by passengers on board E523 NUMBER OF UNIT DETAILS C 6350 Number of Units M n..15 Number of Passengers. Specification of number of departing passengers

expected. 6353 Number of Units, qualifier M an..3 PX Number of seats occupied by passengers on board RTG Routing Information C0-1 E316 PRODUCT LOCATION DETAILS C99 3225 Place/Location Identification M2 an..25 Only the first instance of this data element is used. See IATA Airline

Coding Directory. IATA 3 letter city/airport code. The first two occurrences of Composite Data Element E316 are mandatory, after which all repetitions are conditional. Used to specify the complete routing of the flight(s) for which clearance/advice information is being provided. For arrival flights, the order of stations should be in accordance with the operational sequence between, and including, the origin station and the clearance/advice airport; for departure flights, the order of stations should be in accordance with the operational sequence between, and including, the clearance/advice airport and the destination station; for transit/turnaround flights, the order of stations should be in accordance with the operational sequence between, and including, the origin station and the destination station.

3227 Place/Location Qualifier *

Page 34: Ssim Impguide 03 1 Oct03

EDIFACT Implementation Guide – Scheduling Messages

ISSUE DATE: OCTOBER 2003 26

Segment ID and Name Data Element Tag and Name Data Format

Codes Status IATA Explanatory Notes IFT Interactive Free Text C0-1 E971 FREE TEXT QUALIFICATION C 4451 Text Subject Qualifier M an..3 SIM IATA SSIM defined information 4473 Information type identification C an..4 AHS Arrival high security flight DHS Departure high security flight 4405 Status, coded * 3036 Party Name * 3453 Language, coded * 4440 FREE TEXT C99 an..70 When used with code ZZZ in data element 4451, for bilateral or internal

information, the existing SSIM Data Element Identifiers in the 800 and 900 series may be used. In this case, the 800 or 900 series Data Element Identifier should be separated from the free format text by a slash (/). In case of coded text the involved parties should agree on a common code set.

DAT Date and Time Information C0-9 E688 DATE AND TIME DETAILS C99 2005 Date/Time/Period Qualifier M an..3 Used to qualify the nature of the time information which follows AA Cleared Time – arrival AD Cleared Time – departure FA Timing Flexibility Identifier – arrival FD Timing Flexibility Identifier – departure RA Requested Time – arrival RD Requested Time – departure 9916 First Date * 9918 First Time C n..4 Start of time band when used with Date/Time/Period Qualifiers FA or

FD, otherwise the arrival or departure time according to the Date/Time/Period Qualifier used.

2005 Date/Time/Period Qualifier * 9918 First Time C n..4 End of time band when used with Date/Time/Period Qualifiers FA or

FD, otherwise not used. 8335 Movement Type, coded * 3225 Place/Location Identification * SG1 END UIT Interactive Message Trailer M 0340 INTERACTIVE MESSAGE

REFERENCE NUMBER C an..35 Message Serial Number

0074 NUMBER OF SEGMENTS IN THE

MESSAGE C n..10 Count includes UIH and UIT.

Page 35: Ssim Impguide 03 1 Oct03

Chapter 3 – Airport Coordination / Advice (SKDSLT) Message

ISSUE DATE: OCTOBER 2003 27

3.5 MESSAGE EXAMPLES SCR — New Transit/Turnround flight UIB+UNOA:4+REF 123++++AF:04+COORD:04+970401:1225’ UIH+SKDSLT:97:1::IA+1++1:C’ MSD+1:SCR’ SCR ORG+AF:CDG’ Originator information HDR+K+U+ABC1234’ Header information IFT++ANYTEXT’ Free text ACT+NS+AF+2402+AF+810’ New — Flight Designators PRT+CDG+0910+1030+1+1’ Clearance Airport, timings, terminals PER+U:31MAR9626OCT96+1234567’ Period/frequency EQS+J:AB3:290+J:AB3:290’ Equipment information RTG+NCE+CDG+LHR’ Complete routing IFT++ANYTEXT’ Free text .............repeat for more flights (ACT) UIT+1+12’ UIZ+REF 123+1’ SCR — New Arrival flight UIB+UNOA:4+REF 123++++DL:04+COORD:04+970401:1225’ UIH+SKDSLT:97:1::IA+1++1:F’ MSD+1:SCR’ SCR ORG+DL:ATL’ Originator information HDR+K+U+ABC1234’ Header information ACT+NS+DL+076’ New — Flight Designator PRT+MUC+0715’ Clearance Airport, timing PER+U:31MAR9626OCT96+1234567’ Period/frequency EQS+J:310:178’ Equipment information RTG+CVG+JFK+MUC’ Complete routing .............repeat for more flights (ACT) UIT+1+10’ UIZ+REF 123+1’ SCR — New Departure flight UIB+UNOA:4+REF 123++++BA:04+COORD:04+970401:1225’ UIH+SKDSLT:97:1::IA+1++1:C’ MSD+1:SCR’ SCR ORG+BA:LHR’ Originator information HDR+K+U+ABC1234’ Header information ACT+NS+++BA+963’ New — Flight Designator PRT+FRA++1220++2’ Clearance Airport, timing, terminal PER+U:31MAR9626OCT96+12345’ Period/frequency EQS++J:B11:120’ Equipment information RTG+FRA+BHX+MAN’ Complete routing .............repeat for more flights (ACT) UIT+1+10’ UIZ+REF 123+1’

Page 36: Ssim Impguide 03 1 Oct03

EDIFACT Implementation Guide – Scheduling Messages

ISSUE DATE: OCTOBER 2003 28

SCR — New Departure flight with timing flexibility UIB+UNOA:4+REF 123++++DL:04+COORD:04+990401:1225’ UIH+SKDSLT:99:1::IA+1++1:F’ MSD+1:SCR’ SCR ORG+DL:ATL’ Originator information HDR+K+U+ABC1234’ Header information ACT+NS+++DL+076’ New — Flight Designator PRT+MUC++0715’ Clearance Airport PER+U:31MAR9626OCT96+1234567’ Period/frequency EQS++J:310:178’ Equipment information RTG+CVG+JFK+MUC+VIE’ Complete routing DAT+FD::0630::0830’ Timing flexibility .............repeat for more flights (ACT) UIT+1+11’ UIZ+REF 123+1’ SCR — Revision of timing Transit/Turnround flight UIB+UNOA:4+REF 123++++AF:04+COORD:04+970401:1225’ UIH+SKDSLT:97:1::IA+1++1:C’ MSD+1:SCR’ SCR ORG+AF:CDG’ Originator information HDR+K+U+ABC1234’ Header information ACT+CH+AF+2402+AF+810’ Schedule to be changed PRT+CDG+0910+1030+1+1’ Clearance Airport, timings,terminals PER+U:31MAR9626OCT96+1234567’ Period/frequency EQS+J:AB3:290+J:AB3:290’ Equipment information RTG+NCE+CDG+LHR’ Complete routing ACT+RS+AF+2402+AF+810’ Revised schedule PRT+CDG+0900+1020+1+1’ Clearance Airport, timing, terminal PER+U:31MAR9626OCT96+1234567’ Period/frequency EQS+J:AB3:290+J:AB3:290’ Equipment information RTG+NCE+CDG+LHR’ Complete routing .............repeat for more flights (ACT) UIT+1+15’ UIZ+REF 123+1’

Page 37: Ssim Impguide 03 1 Oct03

Chapter 3 – Airport Coordination / Advice (SKDSLT) Message

ISSUE DATE: OCTOBER 2003 29

SCR — Revision of routing Arrival flight UIB+UNOA:4+REF 123++++DL:04+COORD:04+970401:1225’ UIH+SKDSLT:97:1::IA+1++1:C’ MSD+1:SCR’ SCR ORG+DL:ATL’ Originator information HDR+K+U+ABC1234’ Header information ACT+CH+DL+076’ Schedule to be changed PRT+MUC+0715’ Clearance Airport, timing PER+U:05JUN9625JUN96+1234567’ Period/frequency EQS+J:310:178’ Equipment information RTG+CVG+JFK+MUC’ Complete routing ACT+RS+DL+076’ Revised schedule PRT+MUC+0715’ Clearance Airport, timing PER+U:05JUN9625JUN96+1234567’ Period/frequency EQS+J:310:178’ Equipment information RTG+DFW+JFK+MUC’ Complete routing .............repeat for more flights (ACT) UIT+1+15’ UIZ+REF 123+1’ SCR — Revision of period Departure flight UIB+UNOA:4+REF 123++++BA:04+COORD:04+970401:1225’ UIH+SKDSLT:97:1::IA+1++1:C’ MSD+1:SCR’ SCR ORG+BA:LHR’ Originator information HDR+K+U+ABC1234’ Header information ACT+CH+++BA+963’ Schedule to be changed PRT+FRA++1220++2’ Clearance Airport, timing, terminal PER+U:31MAR9626OCT96+12345’ Period/frequency EQS++J:B11:120’ Equipment information RTG+FRA+BHX+MAN’ Complete routing ACT+RS+++BA+963’ Revised schedule PRT+FRA++1220++2’ Clearance Airport, timing, terminal PER+U:31MAR9617SEP96+12345’ Period/frequency EQS++J:B11:120’ Equipment information RTG+FRA+BHX+MAN’ Complete routing .............repeat for more flights (ACT) UIT+1+15’ UIZ+REF 123+1’

Page 38: Ssim Impguide 03 1 Oct03

EDIFACT Implementation Guide – Scheduling Messages

ISSUE DATE: OCTOBER 2003 30

SCR — Partial deletion/ combination Transit/Turnround flight UIB+UNOA:4+REF 123++++AH:04+COORD:04+970401:1225’ UIH+SKDSLT:97:1::IA+1++1:C’ MSD+1:SCR’ SCR ORG+AH:ALG’ Originator information HDR+K+U+ABC1234’ Header information ACT+CH+AH+1420+AH+1431’ Schedule to be changed PRT+ORY+1000+1050+1+1’ Clearance Airport, timings, terminals PER+U:15APR9628APR96+1234567’ Period/frequency EQS+J:727:156+J:727:156’ Equipment information RTG+ALG+ORY+ORN’ Complete routing ACT+CH+AH+1430+AH+1421’ Schedule to be changed PRT+ORY+1700+1750+1+1’ Clearance Airport, timings, terminals PER+U:15APR9628APR96+1234567’ Period/frequency EQS+J:727:156+J:727:156’ Equipment information RTG+ORN+ORY+ALG’ Complete routing ACT+RS+AH+1420+AH+1421’ Revised schedule PRT+ORY+1000+1750+1+1’ Clearance Airport, timings, terminals PER+U:15APR9628APR96+1234567’ Period/frequency EQS+J:727:156+J:727:156’ Equipment information RTG+ALG+ORY+ALG’ Complete routing .............repeat for more flights (ACT) UIT+1+20’ UIZ+REF 123+1’

SCR — Deletion Departure flight UIB+UNOA:4+REF 123++++LT:04+COORD:04+970401:1225’ UIH+SKDSLT:97:1::IA+1++1:C’ MSD+1:SCR’ SCR ORG+LT:DUS’ Originator information HDR+K+U+ABC1234’ Header information ACT+DS+++LT+002’ Delete — Flight Designator PRT+DUS++0640’ Clearance Airport, timing PER+U:31MAR9626OCT96+12467’ Period/frequency EQS++C:L15:345’ Equipment information RTG+MEX+JFK+DUS’ Complete routing .............repeat for more flights (ACT) UIT+1+10’ UIZ+REF 123+1’

Page 39: Ssim Impguide 03 1 Oct03

Chapter 3 – Airport Coordination / Advice (SKDSLT) Message

ISSUE DATE: OCTOBER 2003 31

SCR — Eliminate Transit/Turnround flight UIB+UNOA:4+REF 123++++LH:04+COORD:04+970401:1225’ UIH+SKDSLT:97:1::IA+1++1:F’ MSD+1:SCR’ SCR ORG+LH:FRA’ Originator information HDR+K+U+ABC1234’ Header information ACT+ES+LH++LH’ Eliminate — Airline Designator PRT+CDG’ Clearance Airport PER+U:21AUG9721AUG97+4’ Period/frequency .............repeat for more flights (ACT) UIT+1+8’ UIZ+REF 123+1’ SCR — Refusal of Clearance Transit/Turnround flight UIB+UNOA:4+REF 123++++TK:04+COORD:04+970401:1225’ UIH+SKDSLT:97:1::IA+1++1:F’ MSD+1:SCR’ SCR ORG+TK:ESB’ Originator information HDR+K+U+ABC1234’ Header information ACT+UU+TK+940+TK+9411+AA:TA+TA’ Schedule Clearance refused PRT+FRA+1030+1130+2+2’ Clearance Airport, timings, terminals PER+U:29MAR9710SEP97+1234567’ Period/frequency EQS+J:DC9:131+J:DC9:131’ Equipment information RTG+ESB+FRA+IST’ Complete routing IFT++WILL CTC AGAIN AFTER NEG WITH A/P AUTH’ Free text .............repeat for more flights (ACT) UIT+1+11’ UIZ+REF 123+1’

Page 40: Ssim Impguide 03 1 Oct03

EDIFACT Implementation Guide – Scheduling Messages

ISSUE DATE: OCTOBER 2003 32

SCR — Special Handling Swap message

UIB+UNOA:4+REF 123++++LH:04+COORD:04+990401:1225’ UIH+SKDSLT:99:1::IA+1++1:C’ MSD+1:SCR’ SCR ORG+LH:FRA’ Originator information HDR+K+U+ABC1234’ Header information IFT+SPH:SHS’ Handle as swap message ACT+CH+AF+2402+AF+810’ Schedule to be changed PRT+CDG+0910+1030+2A+2A’ Clearance Airport, timing PER+U:25MAR0127OCT01+1234567’ Period/frequency EQS+J:AB4:290+J:AB4:290’ Equipment information RTG+FCO+NCE+CDG+LHR+MAN’ Complete routing ACT+RS+AF+2402+AF+810’ Revised schedule PRT+CDG+0950+1045+2A+2A’ Clearance Airport, timing PER+U:25MAR0127OCT01+1234567’ Period/frequency EQS+J:AB4:290+J:AB4:290’ Equipment information RTG+FCO+NCE+CDG+LHR+MAN’ Complete routing ACT+CH+LH+5409+LH+5410’ Schedule to be changed PRT+CDG+0950+1045+2A+2A’ Clearance Airport, timing PER+U:25MAR0127OCT01+1234567’ Period/frequency EQS+J:321:188+J:321:188’ Equipment information RTG+FRA+CDG+FRA’ Complete routing ACT+RS+ LH+5409+LH+5410’ Revised schedule PRT+CDG+0910+1030+2A+2A’ Clearance Airport, timing PER+U:25MAR0127OCT01+1234567’ Period/frequency EQS+J:321:188+J:321:188’ Equipment information RTG+FRA+CDG+FRA’ Complete routing .............repeat for more flights (ACT) UIT+1+8’ UIZ+REF 123+1’

Page 41: Ssim Impguide 03 1 Oct03

Chapter 3 – Airport Coordination / Advice (SKDSLT) Message

ISSUE DATE: OCTOBER 2003 33

SIR — Information Request Departure flight UIB+UNOA:4+REF 123++++DA:04+COORD:04+970401:1225’ UIH+SKDSLT:97:1::IA+1++1:F’ MSD+1:SIR’ SIR ORG+DA:LGW’ Originator information HDR+K+U+ABC1234’ Header information ACT+QD+DA+736’ Query — Flight Designator PRT+CDG’ Clearance Airport PER+U:30MAR9725OCT97+1234567’ Period/frequency .............repeat for more queries (ACT) UIT+1+8’ UIZ+REF 123+1’ SIE — Information Request Departure and Arrival flights UIB+UNOA:4+REF 123++++AF:04+COORD:04+970401:1225’ UIH+SKDSLT:97:1::IA+1++1:F’ MSD+1:SIE’ SIE ORG+AF:CDG’ Originator information HDR+K+U+ABC1234’ Header information ACT+QA+QQQ++QQQ’ Query — all flights/airlines PRT+BRE+1000+1345’ Clearance Airport, timings PER+U:30MAR9725OCT97+5’ Period/frequency .............repeat for more queries (ACT) UIT+1+8’ UIZ+REF 123+1’ SAQ — Availability Query Departure and Arrival flights UIB+UNOA:4+REF 123++++EW:04+COORD:04+970401:1225’ UIH+SKDSLT:97:1::IA+1++1:F’ MSD+1:SAQ’ SAQ ORG+EW:NUE’ Originator information HDR+K+U+ABC1234’ Header information ACT+NS+EW+881+EW+882’ Request slot availability PRT+BRU+1130+1215’ Clearance Airport, timings PER+U:29MAR9824OCT98+12345’ Period/frequency EQS+J:AT3:42+J:AT3:42’ Equipment information RTG+NUE+BRU+NUE’ Complete routing .............repeat for more queries (ACT) UIT+1+10’ UIZ+REF 123+1’

Page 42: Ssim Impguide 03 1 Oct03

EDIFACT Implementation Guide – Scheduling Messages

ISSUE DATE: OCTOBER 2003 34

SHL — Slots Historical and Non-Historical Allocation UIB+UNOA:4+REF 123++++COORD:04+ZZ:04+970401:1225’ UIH+SKDSLT:97:1::IA+1++1:F’ MSD+1:SHL’ SHL ORG+COORD:FRA’ Originator information HDR+K+U+ABC1234’ Header information ACT+HH+ZZ+123+ZZ+124’ Flight Designators — Historic PRT+FRA+1200+1300’ Clearance Airport, timings PER+U:25OCT9827MAR99+3567’ Period/frequency EQS+J:734:154+J:734:154’ Equipment information RTG+MAN+AMS+FRA+AMS+MAN’ Complete routing ACT+UU+ZZ+257+ZZ+257+N80+N80’ Flight Designators, Non-Historic PRT+FRA+2300+2355’ Clearance Airport, timings PER+U:04JAN9923MAR99+12’ Period/frequency EQS+F:73X:0+F:73X:0’ Equipment information RTG+DUS+CGN+FRA+VIE’ Complete routing .............repeat for more flights (ACT) UIT+1+15’ UIZ+REF 123+1’ SAL — Slot Preliminary Allocation List UIB+UNOA:4+REF 123++++COORD:04+ZZ:04+970401:1225’ UIH+SKDSLT:97:1::IA+1++1:F’ MSD+1:SAL’ SAL ORG+COORD:FRA’ Originator information HDR+K+U+ABC1234’ Header information ACT+KK+ZZ+123+ZZ+124’ Flight Designators — Confirmed PRT+FRA+1200+1300’ Clearance Airport, timings PER+U:25OCT9827MAR99+3567’ Period/frequency EQS+J:734:154+J:734:154’ Equipment information RTG+MAN+AMS+FRA+AMS+MAN’ Complete routing ACT+OO+ZZ+257+ZZ+257+AA+GA’ Flight Designators — Offer PRT+FRA+2300+2355’ Clearance Airport, timings PER+U:04JAN9923MAR99+12’ Period/frequency EQS+F:73X:0+F:73X:0’ Equipment information RTG+DUS+CGN+FRA+VIE’ Complete routing DAT+RA::2220+RD::2330’ Requested times .............repeat for more flights (ACT) UIT+1+16’ UIZ+REF 123+1’

Page 43: Ssim Impguide 03 1 Oct03

Chapter 3 – Airport Coordination / Advice (SKDSLT) Message

ISSUE DATE: OCTOBER 2003 35

WCR — Revision of waitlist timing Transit/Turnround flight UIB+UNOA:4+REF 123++++AF:04+COORD:04+970401:1225’ UIH+SKDSLT:97:1::IA+1++1:C’ MSD+1:WCR’ WCR ORG+AF:CDG’ Originator information HDR+K+U+ABC1234’ Header information ACT+CH+AF+2402+AF+810’ Schedule to be changed PRT+CDG+0910+1030+1+1’ Clearance Airport, timings, terminals PER+U:31MAR9626OCT96+1234567’ Period/frequency EQS+J:AB3:290+J:AB3:290’ Equipment information RTG+NCE+CDG+LHR’ Complete routing ACT+RS+AF+2402+AF+810’ Revised schedule PRT+CDG+0900+1020+1+1’ Clearance Airport, timings, terminals PER+U:31MAR9626OCT96+1234567’ Period/frequency EQS+J:AB3:290+J:AB3:290’ Equipment information RTG+NCE+CDG+LHR’ Complete routing .............repeat for more flights (ACT) UIT+1+15’ UIZ+REF 123+1’ WCR — Delete Departure flight from Waitlist

UIB+UNOA:4+REF 123++++LT:04+COORD:04+990401:1225’ UIH+SKDSLT:99:1::IA+1++1:C’ MSD+1:WCR’ WCR ORG+LT:DUS’ Originator information HDR+K+U+ABC1234’ Header information ACT+ZZ+++LT+002’ Delete — Flight Designator PRT+DUS++0700’ Clearance Airport, timing PER+U:30JUN9905OCT99+12467’ Period/frequency .............repeat for more flights (ACT) UIT+1+8’ UIZ+REF 123+1’

WIR — Waitlist Information Request for all flights UIB+UNOA:4+REF 123++++OA:04+COORD:04+990401:1225’ UIH+SKDSLT:99:1::IA+1++1:F’ MSD+1:WIR’ WIR ORG+OA:ATH’ Originator information HDR+K+U+ABC1234’ Header information ACT+QS+OA++OA’ Query — Airline Designator PRT+FRA’ Clearance Airport PER+U:16AUG0130SEP01+1234567’ Period/frequency .............repeat for more queries (ACT) UIT+1+8’ UIZ+REF 123+1’

Page 44: Ssim Impguide 03 1 Oct03

EDIFACT Implementation Guide – Scheduling Messages

ISSUE DATE: OCTOBER 2003 36

WIE — Waitlist Information Enquiry Arrival flights

UIB+UNOA:4+REF 123++++AF:04+COORD:04+990401:1225’ UIH+SKDSLT:99:1::IA+1++1:F’ MSD+1:WIE’ WIE ORG+AF:CDG’ Originator information HDR+K+U+ABC1234’ Header information ACT+QA+QQQ’ Query — all flights/airlines PRT+BRE’ Clearance Airport PER+U:25MAR0127OCT01+5’ Period/frequency .............repeat for more queries (ACT) UIT+1+8’ UIZ+REF 123+1’

Page 45: Ssim Impguide 03 1 Oct03

37

CHAPTER 4 — SCHEDULE UPDATE (SKDUPD) MESSAGE

4.1 MESSAGE FUNCTION

Purpose: To transmit new schedule information for the Carrier specified in the ORG Segment of the Message. Each Message will include all Mandatory Data Elements, and may include one or more Conditional Data Elements. Each Message (UIH-UIT) contains schedule data for one, and only one, Carrier. Data for multiple Carriers may be transmitted within one Interchange (UIB-UIZ) by multiple use of Messages (UIH-UIT). Unless bilaterally agreed, when the MSD Segment of the Message states that complete new schedule information for the Carrier specified in Data Element E973 (Airline Designator)in the ORG Segment of the Message is being transmitted, each SKDUPD Message represents the complete replacement of the schedule data for the Carrier specified in Data Element E973 (Airline Designator) in the ORG Segment of the Message, for the Period of Schedule Validity specified in the HDR Segment. Unless bilaterally agreed, when the MSD Segment of the Message states that partial schedule updates or cancellations are being transmitted, each SKDUPD Message represents new, complete replacement or cancellation of the schedule data for the Flight Designator(s), Period(s) of Operation, Day(s) of Operation and Frequency Rate stated in the TRA and PER Segments of the Message. Data Element 1245 in the PER Segment of the Message is used to specify whether each change is the addition of a new flight, cancellation of an existing flight or change to the details of an existing flight. When the partial updates are specified as ad hoc in the MSD Segment of the Message, the Period of Operation specified in the PER Segment of the Message may only cover one day, for example 02JUN00 to 02JUN00. Unless bilaterally agreed, when the MSD Segment of the Message states that complete new schedule information for a flight number range is being transmitted, each SKDUPD Message represents the complete replacement of the schedule data for all flight numbers in the range specified in the HDR Segment of the Message for the Period of Schedule Validity specified in the HDR Segment. It is the responsibility of the sender to ensure that the information in a Message is complete and unambiguous.

Page 46: Ssim Impguide 03 1 Oct03

EDIFACT Implementation Guide – Scheduling Messages

ISSUE DATE: OCTOBER 2003 38

4.2 RULES FOR MESSAGE CONSTRUCTION

UIH M1 Message header MSD M1 Message action details ORG M1 Originator details HDR M1 Message header information IFT C0-99 Free Text Group 1 M1-99999 TRA M1 Transport Identifier information EQP C0-1 Equipment information PDT C0-3 Product information CAR C0-1 Commercial agreements SER C0-1 Additional service information IFT C0-99 Free Text TRF C0-1 Traffic Restriction information Group 2 M1-999 PER M1 Period/frequency information Group 3 C0-99 PRT M1 Timing/Terminals information OPS C0-9 Port of Call information EQP C0-1 Equipment information PDT C0-3 Product information CAR C0-1 Commercial agreements SER C0-1 Additional service information IFT C0-99 Free Text TRF C0-1 Traffic Restriction information Group 4 C0-999 ODI M1 Origin/Destination details EQP C0-1 Equipment information PDT C0-3 Product information CAR C0-1 Commercial agreements SER C0-1 Additional service information IFT C0-99 Free Text TRF C0-1 Traffic Restriction information UIT M1 Message trailer

Page 47: Ssim Impguide 03 1 Oct03

Chapter 4 – Schedule Update (SKDUPD) Message

ISSUE DATE: OCTOBER 2003 39

4.3 MESSAGE BRANCHING DIAGRAM

U IHM 1 M 1 M 1 M 1 C 9 9

M S D O R G H D R IF T U IT

G R .1M 9 9 9 9 9

M 1

M 1

M 9 9 9G R .2

C 9 9

M 1

G R .3 G R .4C 9 9 9

M 1

C 9

C 3 C 1 C 1 C 9 9 C 1C 1

T R A

E Q P P D T C A R S E R IF T T R F P E R

P R T O D I

O P S

M 1L E V E L 0

L E V E L 1

L E V E L 2

L E V E L 3

L E V E L 4

C 3 C 1 C 1 C 9 9 C 1C 1E Q P P D T C A R S E R IF T T R F

C 3 C 1 C 1 C 9 9 C 1C 1E Q P P D T C A R S E R IF T T R F

S K D U P D - S c h e d u le U p d a te

Equipment, Product, Commercial agreements, Additional service and Traffic Restriction information can appear at any one of three levels. Except where overridden by information provided at a lower level, where they appear in the TRA (transport identifier) group, they apply to the whole flight; where they appear in the PER (date/time/period/frequency) groups, they apply to the period/frequency stated; where they appear in the ODI (origin and destination) group, they apply to the journey leg or segment stated. They may appear in more than one group, in which case the higher level group may be viewed as a default which is added to, or replaced by the lower level groups. For example, if EQP states that the Aircraft Type is 747 in the TRA group and 767 for the leg stated in the ODI group, this means that the Aircraft Type is, for the period stated in the PER, 747 except for the leg stated in the ODI group, where it is 767. EQP and PDT are shown as conditional data segments, but must occur at least once, in such a way that all legs of the flight are covered. With the exception of IFT (in cases where composite element E971 is not used), information at a lower level will replace any information for the same segment appearing at a higher level. For example, data appearing in CAR (Commercial Agreements) at level 4 replaces, for the journey segment stated in the ODI at Level 3, any information contained in CAR at levels 2 or 3. Similarly, data appearing in CAR at level 3 replaces, for the period stated in the PER, any information contained in CAR at Level 2.

Page 48: Ssim Impguide 03 1 Oct03

EDIFACT Implementation Guide – Scheduling Messages

ISSUE DATE: OCTOBER 2003 40

It is recommended that, when complete new schedule information for multiple companies is being transmitted by multiple use of Messages (UIH-UIT) within an Interchange (UIB-UIZ), the Messages be ordered according to the alphanumeric sequence of the company identification code or name. For each company, the data segments should be ordered by Flight Designator. TRA (transport identifier) information shall be stated in service number order when complete new schedule information is being transmitted for a company. PER (date/time/period/frequency) information shall be stated in date/period order when complete new schedule information is being transmitted. PRT (terminal/time) information shall be ordered according to the occurrence of the location within the complete itinerary. For example, if the complete itinerary is AAA-BBB-CCC-DDD, then the PRT information should be stated for AAA first, followed by BBB, then CCC and lastly DDD. There must be a minimum of 2 occurences of PRT for every flight. ODI (origin and destination) information shall be ordered according to the occurrence of the place of departure location within the complete itinerary. When multiple use of ODI occurs with the same place of departure location, they should appear together and be ordered according to the occurrence of the place of arrival location within the complete itinerary. For example, if the complete itinerary is AAA-BBB-CCC-DDD, then the ODI information should be stated for AAA-BBB first, followed by AAA-CCC, AAA-DDD, BBB-CCC, BBB-DDD, CCC-DDD.

Page 49: Ssim Impguide 03 1 Oct03

Chapter 4 – Schedule Update (SKDUPD) Message

ISSUE DATE: OCTOBER 2003 41

4.4 EDIFACT SEGMENTS

Segment ID and Name Data Element Tag and Name Data Format

Codes Status IATA Explanatory Notes UIH INTERACTIVE MESSAGE HEADER M

S306 INTERACTIVE MESSAGE IDENTIFIER M 0065 Message type M an..6 SKDUPD 0052 Message version number M an..3 00 0054 Message release number M an..3 2 0113 Message type sub-function identification * 0051 Controlling agency, coded C an..3 IA 0057 Association assigned code * 0340 INTERACTIVE MESSAGE REFERENCE NUMBER C an..35 Message Serial Number S302 DIALOGUE REFERENCE * 0300 Initiator control reference M an..35 0303 Initiator reference identification C an..35 0051 Controlling agency, coded C an..3 0304 Message subset release number C an..35 S301 STATUS OF THE TRANSFER — INTERACTIVE C 0320 Sender sequence number C n..6 Starts at 1 and is incremented by 1 for each transfer 1 0323 Transfer position, coded C a1 Continuation/End Code. C Continuation Code F End Code 0325 Duplicate indicator C a1 Set = D if the interchange is a duplicate, otherwise not used. S300 DATE AND/OR TIME OF INITIATION * 0338 Event date C n..8 0314 Event time C an..15 0336 Time offset C n4 0035 TEST INDICATOR C n1 Set =1 if the interchange is a test. MSD MESSAGE ACTION DETAILS M E972 MESSAGE PROCESSING DETAILS C 4025 Business function, coded C an..3 1 Air 1225 Message function, coded C an..3 1 Cancellation – to basic schedule 4 Partial schedule update – to basic schedule 18 Complete new schedule information – basic schedule A4 Partial schedule update – ad hoc changes/additions/deletions

to schedule

Page 50: Ssim Impguide 03 1 Oct03

EDIFACT Implementation Guide – Scheduling Messages

ISSUE DATE: OCTOBER 2003 42

Segment ID and Name Data Element Tag and Name Data Format

Codes Status IATA Explanatory Notes

F18 Complete new schedule information for a flight number range – basic schedule

3055 Code list responsible agency, coded * * or set to “3’’ 1225 Message function, coded * 4343 RESPONSE TYPE, CODED * 4343 RESPONSE TYPE, CODED * ORG Originator of Request Details M E973 DELIVERING SYSTEM DETAILS C To specify the system and its location that originates or

delivers the message for a third party. 3036 Party name C an..35 Airline Designator. See IATA Airline Coding Directory for

code set. If more than three characters are used then it is assumed that the full company name is being specified. The full company name should be used when a duplicate IATA designator is in use for the specified company.

3225 Place/Location identification C an..25 See IATA Airline Coding Directory. IATA 3 letter city/airport code

3224 Place/Location name C an..70 Used only when a code does not exist E974 ORIGINATOR IDENTIFICATION DETAILS * 3197 Agent identification C an..9 3465 In-house identification C an..9 3197 Agent identification C an..9 3036 Party name C an..35 E975 LOCATION C 3225 Place/Location identification C an..25 See IATA Airline Coding Directory. IATA 3 letter

city/airport code 3224 Place/Location name C an..70 Used only when a code does not exist 3036 PARTY NAME * 3457 ORIGINATOR TYPE CODED * E976 ORIGINATOR DETAILS * 3207 Country, coded C an..3 6345 Currency, coded C an..3 3453 Language, coded C an..3 3503 ORIGINATORS AUTHORITY IDENTIFICATION * HDR Header information M 4405 STATUS, CODED M an..3 Schedule Status K Confirmed, Effective, Working, Firm, etc. P Provisional, Draft, Proposed, Subject to Change, etc. E507 DATE/TIME/PERIOD M 2005 Date/Time/Period qualifier M an..3 Time Mode, mandatory L Local Time Mode U UTC Time Mode 2380 Date/Time/Period C an..35 Period of Schedule Validity, mandatory for bulk data

transmission 2379 Date/Time/Period format qualifier * 1154 REFERENCE NUMBER C an..35 Creator’s Reference 2380 TIME/DATE/PERIOD C an..35 Release (Sell) Date

Page 51: Ssim Impguide 03 1 Oct03

Chapter 4 – Schedule Update (SKDUPD) Message

ISSUE DATE: OCTOBER 2003 43

Segment ID and Name Data Element Tag and Name Data Format

Codes Status IATA Explanatory Notes 4440 FREE TEXT C an..70 Title of Data

7135 PRODUCT IDENTIFICATION C an..35 Flight Number of first flight in a flight number range. Used only when partial schedule updates are being transmitted for a complete range of flight numbers.

7135 PRODUCT IDENTIFICATION C an..35 Flight Number of last flight in a flight number range. Used

only when partial schedule updates are being transmitted for a complete range of flight numbers.

IFT Interactive Free Text C0-99 E971 FREE TEXT QUALIFICATION C 4451 Text Subject Qualifier M an..3 SIM IATA SSIM defined information ZZZ Mutually defined (Bilateral or Internal information) 4473 Information type identification C an..4 EN Not Electronic Ticketing Candidate ER Electronic Ticketing Required ET Electronic Ticketing Candidate ISD In Flight Service Information default RN Redirection not Required RR Requires Redirection 4405 Status, coded * 3036 Party name * 3453 Language, coded * 4440 FREE TEXT C99 When used with code ZZZ in data element 4451, for

bilateral or internal information, the existing SSIM Data Element Identifiers in the 800 and 900 series may be used. In this case, the 800 or 900 series Data Element Identifier should be separated from the free format text by a slash (/). In case of coded text the involved parties should agree on a common code set.

SG1 START M1-99999 TRA Transport Identifier to be Updated/Cancelled M E988 COMPANY IDENTIFICATION M 3036 Party name M an.35 Only the first occurrence of the data

element is used, and it specifies the Airline Designator of the Administrating Carrier. See IATA Airline Coding Directory for code set. If more than three characters are used then it is assumed that the full company name is being specified.

3036 Party name * 3036 Party name * E989 PRODUCT IDENTIFICATION DETAILS C 7135 Product Identification M an..35 To indicate a service identification i.e. a Flight Number or

an identification of a ground event. If not stated, then cancellations or requests for repeat information apply to all services for specified company. Must be stated if complete or partial new schedule information being transmitted.

Page 52: Ssim Impguide 03 1 Oct03

EDIFACT Implementation Guide – Scheduling Messages

ISSUE DATE: OCTOBER 2003 44

Segment ID and Name Data Element Tag and Name Data Format

Codes Status IATA Explanatory Notes 7037 Characteristic Identification * 7139 Product Identification Characteristic C an..3 Operational Suffix - single alpha character. 7009 Item Description Identification C an..7 Change Reason See SSIM Chapter 2 Change Reason for

code set. 7009 Item Description Identification C an..7 Change Reason See SSIM Chapter 2 Change Reason for

code set. 7009 Item Description Identification C an..7 Change Reason See SSIM Chapter 2 Change Reason for

code set. EQP Equipment information C0-1 E220 MODE OF TRANSPORT M 8067 Mode of Transport, coded M an..3 Service Type code. See SSIM Appendix C for code set 8066 Mode of Transport * E360 EQUIPMENT IDENTIFICATION M 8179 Type of means of transport identification M an..8 Aircraft Type. See SSIM Appendix A for code set 7139 Product Identification Characteristic C an..3 Aircraft Type Operational Suffix, may be an airline internal

aircraft code. 8212 Identification of the means of transport C an..17 Aircraft Registration. XXXXX may be used to

state that the aircraft registration is not known. 8260 Equipment Identification Number C an..17 Aircraft Type Publication Override. E988 COMPANY IDENTIFICATION C 3036 Party name M an..35 Airline Designator of the Aircraft Owner. See IATA Airline

Coding Directory for code set. If more than three characters are used then it is assumed that the full company name is being specified. Use this Data Element only if it differs from the Airline Designator used in the TRA Segment of the Message. In SSIM implementation of this Data Element is Conditional.

3036 Party name C an..35 Airline Designator of the Cockpit Crew Employer. See IATA Airline Coding Directory for code set. If more than three characters are used then it is assumed that the full company name is being specified. Use this Data Element only if the default does not apply, which is that the cockpit crew is employed by the Aircraft Owner.

3036 Party name C an..35 Airline Designator of the Cabin Crew Employer. See IATA Airline Coding Directory for code set. If more than three characters are used then it is assumed that the full company name is being specified. Use this Data Element only if the default does not apply, which is that the cabin crew is employed by the Aircraft Owner.

PDT Product Information C0-3 7133 PRODUCT DETAILS QUALIFIER C an..3 1 Reservations classes (Passenger Reservations Booking

Designator – PRBD) 2 Physical configuration (Aircraft Configuration/Version –

ACV) 3 Blocked Seats and/or Unit Load Devices CN Class Nesting E996 PRODUCT DETAILS C26 7037 Characteristic Identification M an..17 Passenger Reservations Booking Designator (PRBD) or

Aircraft Configuration/Version (ACV) specification of Compartment/Class of Service or Cargo Codes. See SSIM Chapter 2 Aircraft Configuration/Version (ACV) table for code set. When a PRBD is being stated, a single alpha character is used, except when Meal Codes are also being stated in Data Element 7161 which apply to all classes, when QQQ can be used with the Meal Code(s) being stated only once.

Page 53: Ssim Impguide 03 1 Oct03

Chapter 4 – Schedule Update (SKDUPD) Message

ISSUE DATE: OCTOBER 2003 45

Segment ID and Name Data Element Tag and Name Data Format

Codes Status IATA Explanatory Notes 4510 Requested information C an..3 Passenger Reservations Booking Designator (PRBD) or

Aircraft Configuration/Version (ACV) specification of number of seats or containers/pallets. When an ACV is being stated in Data Element 7037, the number of seats stated is the total of the Class of Service Code specified in Data Element 7037. Alternatively, a total seat configuration for all Classes of Service may be stated by only using this data element in the last repeat of composite data element E996 which is applicable for ACV. When a PRBD is being stated in Data Element 7037, the number refers to the class or classes which precede it, i.e. when a series of classes appear in repeats of composite data element E996 without individual numbers being stated in data element 4510, then the first subsequent number appearing in a data element 4510 refers to the total of all those classes since the last instance of a PRBD with a number stated in this data element.

7161 Special Services, coded C an..3 Meal Service Note. 1-3 meal types per PRBD/ACV. See SSIM Appendix B Meal Service Note for code set.

7009 Item Description Identification C an..7 Passenger Reservations Booking Modifier (PRBM). In the case of Product Details Qualifier “CN” — related compartment code. Single alpha character

7009 Item Description Identification * 7009 Item Description Identification * CAR Commercial Agreements C0-1 E374 COMPANY ROLE IDENTIFICATION C99

8051 Transport Stage Qualifier M an..3 A Partnership Specification D Duplicate Leg Cross Reference – Duplicate Leg

Identification F Flight Number Override

L Code Sharing – Commercial Duplicate

O Duplicate Leg Cross Reference – Operational Leg Identification

P Joint Operation Airline Designators (Participating Airlines)

R Joint Operation Airline Designators (Reservations control carrier)

S Code Sharing – Shared Airline Designation or Wet Lease Airline Designation

3036 Party name M an..35 When used with Transport Stage Qualifier codes other than A — Airline Designator. See IATA Airline Coding Directory for code set. If more than three characters are used then it is assumed that the full company name, or multiple names, is being specified. When used with Transport Stage Qualifier code A – text used specifies a partnership/alliance arrangement.

7135 Product Identification C an..35 Flight Number 7139 Product Identification Characteristic C an..3 Operational Suffix – single alpha character. Note 1: When using to specify Carriers involved in Joint Operations, the Administrating Carrier is taken from the TRA Segment, the Reservations

Control Carrier should be specified as the first instance of E374, followed by other Carriers involved in the Joint Operation by repeat use of E374. If it becomes necessary to ensure correct publication sequence of Joint Operation Carriers, the Administrating Carrier may also be specified in a Composite E374 in the sequence required.

Note 2: Where it is required to disclose an Airline name AND a corporate, or network, name, it is recommended that the form “AIRLINE X DBA ABC EXPRESS ” be used — DBA meaning “doing business as”.

Note 3: In cases where Code Share and Wet Lease conditions exist onthe same flight, and it is required to disclose both Airlines, it is recommended that the form “AIRLINE ABC FOR AIRLINE XYZ ” be used, where AIRLINE ABC is the Airline which has provided the aircraft and crew and is actually operating the flight (the Wet Lease Carrier), and AIRLINE XYZ is the Airline which is the operating carrier in a Code Share arrangement.

Page 54: Ssim Impguide 03 1 Oct03

EDIFACT Implementation Guide – Scheduling Messages

ISSUE DATE: OCTOBER 2003 46

Segment ID and Name Data Element Tag and Name Data Format

Codes Status IATA Explanatory Notes SER Additional Service Information C0-1 E965 PRODUCT FACILITIES, CODED C 9039 Facility type, coded C an..3 In-Flight Service Information 1 Movie 2 Telephone 3 Telex 4 Audio programming 5 Television 6 Reservation booking service 7 Duty Free sales 8 Smoking 9 Non smoking 10 Short Feature Video 11 No Duty Free sales 12 In-seat power 13 Internet access 9038 Facility description text * 7133 Product details qualifier C an..3 1 Reservations classes (Passenger Reservations Booking

Designator – PRBD) 2 Physical configuration (Aircraft Configuration/Version –

ACV) 3 Blocked Seats and/or Unit Load Devices 7037 Characteristic identification C26 an..17 Passenger Reservations Booking Designator (PRBD) or

Aircraft Configuration/Version (ACV) compartment, or Class of Service. See SSIM Chapter 2 Aircraft Configuration/Version table for ACV code set. Single alpha character for PRBD

IFT Interactive Free Text C0-99 E971 FREE TEXT QUALIFICATION C 4451 Text Subject Qualifier M an..3 ZZZ Mutually defined (Bilateral or Internal information)

4473 Information type identification C an..4 4405 Status, coded * 3036 Party name * 3453 Language, coded * 4440 FREE TEXT C99 When used with code ZZZ in data element 4451, for

bilateral or internal information, the existing SSIM Data Element Identifiers in the 800 and 900 series may be used. In this case, the 800 or 900 series Data Element Identifier should be separated from the free format text by a slash (/). In case of coded text the involved parties should agree on a common code set

Page 55: Ssim Impguide 03 1 Oct03

Chapter 4 – Schedule Update (SKDUPD) Message

ISSUE DATE: OCTOBER 2003 47

Segment ID and Name Data Element Tag and Name Data Format

Codes Status IATA Explanatory Notes TRF Traffic Restriction Information C0-1 E007 TRAFFIC RESTRICTION INFORMATION C9 8015 Traffic Restriction, coded C an..3 Traffic Restriction Code. Indicates that certain restrictions

apply to the carriage of passengers cargo and/or mail. See SSIM Appendix G for code set.

8017 Traffic Restriction Type, coded C an..3 1 Traffic Restriction Applicable to Passengers Only 2 Traffic Restriction Applicable to Cargo/Mail Only 3 Traffic Restriction Applicable to Cargo Only 4 Traffic Restriction Applicable to Mail Only 8035 Traffic Restriction Type Qualifier, coded C an..3 1 Traffic Restriction Code Qualifier at Board Point 2 Traffic Restriction Code Qualifier at Off Point 3 Traffic Restriction Code Qualifier at Board and Off Points 4440 Free text C an..70 Traffic Restriction Text Information SG2 START M1-999 PER Date/Time/Period M E507 DATE/TIME/PERIOD M 2005 Date/time/period qualifier M an..3 Time Mode, mandatory. Must be the same as in the HDR

Segment. L Local Time Mode U UTC Time Mode 2380 Date/time/period C an..35 Period of Operation, mandatory. When ad hoc change/

addition/cancellation is being specified, the Period of Operation must only cover a single date.

2379 Date/time/period format qualifier * 6072 FREQUENCY VALUE M n..9 Day(s) of Operation 6071 FREQUENCY QUALIFIER C an..3 Frequency Rate 1245 STATUS INDICATOR, CODED C an..3 Action Identifier and, optionally, ASM Withdrawal

Indicator. Only used for partial schedule updates, when it is mandatory.

2 Cancellation Action Identifier - CNL 3 Created new Action Identifier - NEW 5 Replacement Action Identifier - RPL AW2 Cancellation with ASM Withdrawal Indicator. Action

Identifier - CNL AW3 New information with ASM Withdrawal Indicator. Action

Identifier - NEW AW5 Replacement with ASM Withdrawal Indicator. Action

Identifier - RPL SG3 START C0-99 PRT Terminal/Time Information M There must be 2 occurrences of PRT for every flight. E517 LOCATION IDENTIFICATION M 3225 Place/Location identification M an..25 Station. See IATA Airline Coding Directory. IATA 3 letter

city/airport code. 1131 Code list qualifier * 3055 Code list responsible agency, coded * 3224 Place/Location name * E362 TIME INFORMATION C 2002 First Time M n4 Scheduled Time of Aircraft Arrival (STA). 2002 Second Time C n4 Passenger STA 9986 UTC/Local Time Variation C n4 UTC/Local Time Variation 2148 Date Variation C n1 Date Variation of Scheduled Time of Aircraft Arrival.

Variation is assumed to be positive. If negative, use minus sign (-) before the numeric.

Page 56: Ssim Impguide 03 1 Oct03

EDIFACT Implementation Guide – Scheduling Messages

ISSUE DATE: OCTOBER 2003 48

Segment ID and Name Data Element Tag and Name Data Format

Codes Status IATA Explanatory Notes E362 TIME INFORMATION C 2002 First Time M n4 Scheduled Time of Aircraft Departure(STD). 2002 Second Time C n4 Passenger STD 9986 UTC/Local Time Variation C n4 UTC/Local Time Variation 2148 Date Variation C n1 Date Variation of Scheduled Time of Aircraft Departure.

Variation is assumed to be positive. If negative, use minus sign (-) before the numeric.

E992 POSITION C 3223 Related place/location one identification C an..25 Passenger Terminal Identifier — Arrival.

See SSIM Appendix D for code set. 3223 Related place/location one identification C an..25 Aircraft Terminal Identifier —Arrival.

See SSIM Appendix D for code set. E992 POSITION C 3223 Related place/location one identification C an..25 Passenger Terminal Identifier — Departure.

See SSIM Appendix D for code set. 3223 Related place/location one identification C an..25 Aircraft Terminal Identifier —Departure.

See SSIM Appendix D for code set. OPS Port of Call Information C0-9 E368 ON-TIME PERFORMANCE C 2380 Date/time/period M an..35 On-Time Performance Indicator. Use aaann format only

here — where aaa is the reporting month and nn is the year. 5482 Percentage C n..8 On-Time Performance Indicator. Value expressed as a

percentage of a specified amount. Use to indicate the on-time performance achieved by the Carrier.

5245 Percentage qualifier C an..3 On-Time Performance Indicator, mandatory if on-time performance being used. Identification of the usage of a percentage.

N No information available O 1 percent accuracy T 10 percent accuracy U Undetermined

E370 PORT OF CALL DETAILS C 9984 Type of Call at Port C n..3 1 Technical Landing 2 Flaglanding 3 Plane Change without Aircraft Type Change 5 Onward Flight 6 Passenger Check-In 9982 Restricted Payload C an..17 Restricted Payload 9417 Government Action, Coded * E988 COMPANY IDENTIFICATION C 3036 Party name M3 an..35 Only the first occurrence of the data element is used, and it

specifies the Onward Flight or Passenger Check-In airline or agency — the Airline Designator of the Administrating Carrier or airline providing Passenger Check-In. See IATA Airline Coding Directory for code set. If more than three characters are used then it is assumed that the full company name is being specified, or any other plain text pertaining to where a passenger should go to for Check-In.

E989 PRODUCT IDENTIFICATION DETAILS C 7135 Product Identification M an..35 Onward Flight — Flight Number 7037 Characteristic Identification C an..17 Date Variation. Only used when Onward Flight

is being specified. See SSIM Chapter 2 Date Variation for code set.

Page 57: Ssim Impguide 03 1 Oct03

Chapter 4 – Schedule Update (SKDUPD) Message

ISSUE DATE: OCTOBER 2003 49

Segment ID and Name Data Element Tag and Name Data Format

Codes Status IATA Explanatory Notes 7139 Product Identification Characteristic C an..3 Operational Suffix – single alpha character 7009 Item Description Identification * SG3 END EQP Equipment information C0-1 E220 MODE OF TRANSPORT M 8067 Mode of Transport, coded M an..3 Service Type code. See SSIM Appendix C for code set 8066 Mode of Transport * E360 EQUIPMENT IDENTIFICATION M 8179 Type of means of transport identification M an..8 Aircraft Type. See SSIM Appendix A for code set 7139 Product Identification Characteristic C an..3 Aircraft Type Operational Suffix, may be an airline internal

aircraft code. 8212 Identification of the means of transport C an..17 Aircraft Registration. XXXXX may be used to

state that the aircraft registration is not known. 8260 Equipment Identification Number C an..17 Aircraft Type Publication Override. E988 COMPANY IDENTIFICATION C 3036 Party name M an..35 Airline Designator of the Aircraft Owner. See IATA

Airline Coding Directory for code set. If more than three characters are used then it is assumed that the full company name is being specified. Use this Data Element only if it differs from the Airline Designator used in the TRA Segment of the Message. In SSIM implementation of this Data Element is Conditional.

3036 Party name C an..35 Airline Designator of the Cockpit Crew Employer. See IATA Airline Coding Directory for code set. If more than three characters are used then it is assumed that the full company name is being specified. Use this Data Element only if the default does not apply, which is that the cockpit crew is employed by the Aircraft Owner.

3036 Party name C an..35 Airline Designator of the Cabin Crew Employer. See IATA Airline Coding Directory for code set. If more than three characters are used then it is assumed that the full company name is being specified. Use this Data Element only if the default does not apply, which is that the cabin crew is employed by the Aircraft Owner.

PDT Product Information C0-3 7133 PRODUCT DETAILS QUALIFIER C an..3 1 Reservations classes (Passenger Reservations Booking

Designator – PRBD) 2 Physical configuration (Aircraft Configuration/Version – ACV) 3 Blocked Seats and/or Unit Load Devices CN Class Nesting

E996 PRODUCT DETAILS C26 7037 Characteristic Identification M an..17 Passenger Reservations Booking Designator (PRBD) or Aircraft

Configuration/Version (ACV) specification of Compartment/Class of Service or Cargo Codes. See SSIM Chapter 2 Aircraft Configuration/Version (ACV) table for code set. When a PRBD is being stated, a single alpha character is used, except when Meal Codes are also being stated in Data Element 7161 which apply to all classes, when QQQ can be used with the Meal Code(s) being stated only once.

Page 58: Ssim Impguide 03 1 Oct03

EDIFACT Implementation Guide – Scheduling Messages

ISSUE DATE: OCTOBER 2003 50

Segment ID and Name Data Element Tag and Name Data Format

Codes Status IATA Explanatory Notes 4510 Requested information C an..3 Passenger Reservations Booking Designator (PRBD) or Aircraft

Configuration/Version (ACV) specification of number of seats or containers/pallets. When an ACV is being stated in Data Element 7037, the number of seats stated is the total of the Class of Service Code specified in Data Element 7037. Alternatively, a total seat configuration for all Classes of Service may be stated by only using this data element in the last repeat of composite data element E996 which is applicable for ACV. When a PRBD is being stated in Data Element 7037, the number refers to the class or classes which precede it, i.e. when a series of classes appear in repeats of composite data element E996 without individual numbers being stated in data element 4510, then the first subsequent number appearing in a data element 4510 refers to the total of all those classes since the last instance of a PRBD with a number stated in this data element.

7161 Special Services, coded C an..3 Meal Service Note. 1-3 meal types per PRBD/ACV. See SSIM Appendix B Meal Service Note for code set.

7009 Item Description Identification C an..7 Passenger Reservations Booking Modifier (PRBM). In the case of Product Details Qualifier “CN” — related compartment code. Single alpha character

7009 Item Description Identification * 7009 Item Description Identification * CAR Commercial Agreements C0-1 E374 COMPANY ROLE IDENTIFICATION C99 8051 Transport Stage Qualifier M an..3 A Partnership Specification D Duplicate Leg Cross Reference – Duplicate Leg

Identification F Flight Number Override L Code Sharing – Commercial Duplicate O Duplicate Leg Cross Reference – Operational Leg

Identification P Joint Operation Airline Designators (Participating Airlines) R Joint Operation Airline Designators (Reservations control

carrier) S Code Sharing – Shared Airline Designation or Wet Lease

Airline Designation 3036 Party name M an..35 When used with Transport Stage Qualifier codes other than

A — Airline Designator. See IATA Airline Coding Directory for code set. If more than three characters are used then it is assumed that the full company name, or multiple names, is being specified. When used with Transport Stage Qualifier code A – text used specifies a partnership/alliance arrangement.

7135 Product Identification C an..35 Flight Number 7139 Product Identification Characteristic C an..3 Operational Suffix – single alpha character. Note 1: When using to specify Carriers involved in Joint Operations, the Administrating Carrier is taken from the TRA Segment, the Reservations

Control Carrier should be specified as the first instance of E374, followed by other Carriers involved in the Joint Operation by repeat use of E374. If it becomes necessary to ensure correct publication sequence of Joint Operation Carriers, the Administrating Carrier may also be specified in a Composite E374 in the sequence required.

Note 2: Where it is required to disclose an Airline name AND a corporate, or network, name, it is recommended that the form “AIRLINE X DBA ABC EXPRESS ” be used — DBA meaning “doing business as”.

Note 3: In cases where Code Share and Wet Lease conditions exist onthe same flight, and it is required to disclose both Airlines, it is recommended that the form “AIRLINE ABC FOR AIRLINE XYZ ” be used, where AIRLINE ABC is the Airline which has provided the aircraft and crew and is actually operating the flight (the Wet Lease Carrier), and AIRLINE XYZ is the Airline which is the operating carrier in a Code Share arrangement.

Page 59: Ssim Impguide 03 1 Oct03

Chapter 4 – Schedule Update (SKDUPD) Message

ISSUE DATE: OCTOBER 2003 51

Segment ID and Name Data Element Tag and Name Data Format

Codes Status IATA Explanatory Notes SER Additional Service Information C0-1 E965 PRODUCT FACILITIES, CODED C 9039 Facility type, coded C an..3 In-Flight Service Information 1 Movie 2 Telephone 3 Telex 4 Audio programming 5 Television 6 Reservation booking service 7 Duty Free sales 8 Smoking 9 Non smoking 10 Short Feature Video 11 No Duty Free sales 12 In-seat power 13 Internet access 9038 Facility description text * 7133 Product details qualifier C an..3 1 Reservations classes (Passenger Reservations Booking

Designator – PRBD) 2 Physical configuration (Aircraft Configuration/Version –

ACV)

3 Blocked Seats and/or Unit Load Devices 7037 Characteristic identification C26 an..17 Passenger Reservations Booking Designator (PRBD) or

Aircraft Configuration/Version (ACV) compartment, or Class of Service. See SSIM Chapter 2 Aircraft Configuration/Version table for ACV code set. Single alpha character for PRBD

IFT Interactive Free Text C0-99 E971 FREE TEXT QUALIFICATION C 4451 Text Subject Qualifier M an..3 ZZZ Mutually defined (Bilateral or Internal information) 4473 Information type identification C an..4 4405 Status, coded * 3036 Party name * 3453 Language, coded * 4440 FREE TEXT C99 When used with code ZZZ in data element 4451, for

bilateral or internal information, the existing SSIM Data Element Identifiers in the 800 and 900 series may be used. In this case, the 800 or 900 series Data Element Identifier should be separated from the free format text by a slash (/). In case of coded text the involved parties should agree on a common code set.

Page 60: Ssim Impguide 03 1 Oct03

EDIFACT Implementation Guide – Scheduling Messages

ISSUE DATE: OCTOBER 2003 52

Segment ID and Name Data Element Tag and Name Data Format

Codes Status IATA Explanatory Notes TRF Traffic Restriction Information C0-1 E007 TRAFFIC RESTRICTION INFORMATION C9 8015 Traffic Restriction, coded C an..3 Traffic Restriction Code. Indicates that certain restrictions

apply to the carriage of passengers cargo and/or mail. See SSIM Appendix G for code set.

8017 Traffic Restriction Type, coded C an..3 1 Traffic Restriction Applicable to Passengers Only 2 Traffic Restriction Applicable to Cargo/Mail Only 3 Traffic Restriction Applicable to Cargo Only 4 Traffic Restriction Applicable to Mail Only 8035 Traffic Restriction Type Qualifier, coded C an..3 1 Traffic Restriction Code Qualifier at Board Point 2 Traffic Restriction Code Qualifier at Off Point 3 Traffic Restriction Code Qualifier at Board and Off Points 4440 Free text C an..70 Traffic Restriction Text Information SG4 START C0-999 ODI Origin and Destination Details M 3225 PLACE/LOCATION IDENTIFICATION C an..25 Origin Station. Mandatory. See IATA Airline Coding

Directory. IATA 3 letter city/airport code. 3225 PLACE/LOCATION IDENTIFICATION C an..25 Destination Station. Mandatory. See IATA Airline Coding

Directory. IATA 3 letter city/airport code. EQP Equipment information C0-1 E220 MODE OF TRANSPORT M 8067 Mode of Transport, coded M an..3 Service Type code. See SSIM Appendix C for code set 8066 Mode of Transport * E360 EQUIPMENT IDENTIFICATION M 8179 Type of means of transport identification M an..8 Aircraft Type. See SSIM Appendix A for code set 7139 Product Identification Characteristic C an..3 Aircraft Type Operational Suffix, may be an airline internal

aircraft code. 8212 Identification of the means of transport C an..17 Aircraft Registration. XXXXX may be used to

state that the aircraft registration is not known. 8260 Equipment Identification Number C an..17 Aircraft Type Publication Override. E988 COMPANY IDENTIFICATION C 3036 Party name M an..35 Airline Designator of the Aircraft Owner. See IATA Airline

Coding Directory for code set. If more than three characters are used then it is assumed that the full company name is being specified. Use this Data Element only if it differs from the Airline Designator used in the TRA Segment of the Message. In SSIM implementation of this Data Element is Conditional.

3036 Party name C an..35 Airline Designator of the Cockpit Crew Employer. See IATA Airline Coding Directory for code set. If more than three characters are used then it is assumed that the full company name is being specified. Use this Data Element only if the default does not apply, which is that the cockpit crew is employed by the Aircraft Owner.

3036 Party name C an..35 Airline Designator of the Cabin Crew Employer. See IATA Airline Coding Directory for code set. If more than three characters are used then it is assumed that the full company name is being specified. Use this Data Element only if the default does not apply, which is that the cabin crew is employed by the Aircraft Owner.

Page 61: Ssim Impguide 03 1 Oct03

Chapter 4 – Schedule Update (SKDUPD) Message

ISSUE DATE: OCTOBER 2003 53

Segment ID and Name Data Element Tag and Name Data Format

Codes Status IATA Explanatory Notes PDT Product Information C0-3 7133 PRODUCT DETAILS QUALIFIER C an..3 1 Reservations classes (Passenger Reservations Booking

Designator – PRBD) 2 Physical configuration (Aircraft Configuration/Version –

ACV) 3 Blocked Seats and/or Unit Load Devices CN Class Nesting E996 PRODUCT DETAILS C26 7037 Characteristic Identification M an..17 Passenger Reservations Booking Designator (PRBD) or

Aircraft Configuration/Version (ACV) specification of Compartment/Class of Service or Cargo Codes. See SSIM Chapter 2 Aircraft Configuration/Version (ACV) table for code set. When a PRBD is being stated, a single alpha character is used, except when Meal Codes are also being stated in Data Element 7161 which apply to all classes, when QQQ can be used with the Meal Code(s) being stated only once.

4510 Requested information C an..3 Passenger Reservations Booking Designator (PRBD) or Aircraft Configuration/Version (ACV) specification of number of seats or containers/pallets. When an ACV is being stated in Data Element 7037, the number of seats stated is the total of the Class of Service Code specified in Data Element 7037. Alternatively, a total seat configuration for all Classes of Service may be stated by only using this data element in the last repeat of composite data element E996 which is applicable for ACV. When a PRBD is being stated in Data Element 7037, the number refers to the class or classes which precede it, i.e. when a series of classes appear in repeats of composite data element E996 without individual numbers being stated in data element 4510, then the first subsequent number appearing in a data element 4510 refers to the total of all those classes since the last instance of a PRBD with a number stated in this data element.

7161 Special Services, coded C an..3 Meal Service Note. 1-3 meal types per PRBD/ACV. See SSIM Appendix B Meal Service Note for code set.

7009 Item Description Identification C an..7 Passenger Reservations Booking Modifier (PRBM). In the case of Product Details Qualifier “CN” — related compartment code. Single alpha character

7009 Item Description Identification * 7009 Item Description Identification * CAR Commercial Agreements C0-1 E374 COMPANY ROLE IDENTIFICATION C99 8051 Transport Stage Qualifier M an..3 A Partnership Specification D Duplicate Leg Cross Reference – Duplicate Leg Identification F Flight Number Override L Code Sharing – Commercial Duplicate O Duplicate Leg Cross Reference – Operational Leg

Identification P Joint Operation Airline Designators (Participating Airlines) R Joint Operation Airline Designators (Reservations control

carrier) S Code Sharing – Shared Airline Designation or Wet Lease

Airline Designation 3036 Party name M an..35 When used with Transport Stage Qualifier codes other than A

— Airline Designator. See IATA Airline Coding Directory for code set. If more than three characters are used then it is assumed that the full company name, or multiple names, is being specified. When used with Transport Stage Qualifier code A – text used specifies a partnership/alliance arrangement.

Page 62: Ssim Impguide 03 1 Oct03

EDIFACT Implementation Guide – Scheduling Messages

ISSUE DATE: OCTOBER 2003 54

Segment ID and Name Data Element Tag and Name Data Format

Codes Status IATA Explanatory Notes 7135 Product Identification C an..35 Flight Number 7139 Product Identification Characteristic C an..3 Operational Suffix – single alpha character. Note 1: When using to specify Carriers involved in Joint Operations, the Administrating Carrier is taken from the TRA Segment, the Reservations

Control Carrier should be specified as the first instance of E374, followed by other Carriers involved in the Joint Operation by repeat use of E374. If it becomes necessary to ensure correct publication sequence of Joint Operation Carriers, the Administrating Carrier may also be specified in a Composite E374 in the sequence required.

Note 2: Where it is required to disclose an Airline name AND a corporate, or network, name, it is recommended that the form “AIRLINE X DBA ABC EXPRESS ” be used — DBA meaning “doing business as”.

Note 3: In cases where Code Share and Wet Lease conditions exist onthe same flight, and it is required to disclose both Airlines, it is recommended that the form “AIRLINE ABC FOR AIRLINE XYZ ” be used, where AIRLINE ABC is the Airline which has provided the aircraft and crew and is actually operating the flight (the Wet Lease Carrier), and AIRLINE XYZ is the Airline which is the operating carrier in a Code Share arrangement.

SER Additional Service Information C0-1 E965 PRODUCT FACILITIES, CODED C 9039 Facility type, coded C an..3 In-Flight Service Information 1 Movie 2 Telephone 3 Telex 4 Audio programming 5 Television 6 Reservation booking service 7 Duty Free sales 8 Smoking 9 Non smoking 10 Short Feature Video 11 No Duty Free sales 12 In-seat power 13 Internet access 9038 Facility description text * 7133 Product details qualifier C an..3 1 Reservations classes (Passenger Reservations Booking

Designator – PRBD) 2 Physical configuration (Aircraft Configuration/Version –

ACV) 3 Blocked Seats and/or Unit Load Devices 7037 Characteristic identification C26 an..17 Passenger Reservations Booking Designator (PRBD) or

Aircraft Configuration/Version (ACV) compartment, or Class of Service. See SSIM Chapter 2 Aircraft Configuration/Version table for ACV code set. Single alpha character for PRBD

IFT Interactive Free Text C0-99 E971 FREE TEXT QUALIFICATION C 4451 Text Subject Qualifier M an..3 SIM IATA SSIM defined information ZZZ Mutually defined (Bilateral or Internal information) 4473 Information type identification C an..4 101 Passenger Terminal Segment Override - Arrival 102 Passenger Terminal Segment Override - Departure BD Minimum Connecting Time International/Domestic Status

Override – Domestic at Board Point BI Minimum Connecting Time International/Domestic Status

Override – International at Board Point EN Not Electronic Ticketing Candidate ER Electronic Ticketing Required ET Electronic Ticketing Candidate OD Domestic at Off Point OI International at Off Point RAR Request all Reservations RN Redirection not Required RR Requires Redirection TSG Subject to Government Approval

Page 63: Ssim Impguide 03 1 Oct03

Chapter 4 – Schedule Update (SKDUPD) Message

ISSUE DATE: OCTOBER 2003 55

Segment ID and Name Data Element Tag and Name Data Format

Codes Status IATA Explanatory Notes 4405 Status, coded * 3036 Party name * 3453 Language, coded * 4440 FREE TEXT C99 When used with code ZZZ in data element 4451, for

bilateral or internal information, the existing SSIM Data Element Identifiers in the 800 and 900 series may be used. In this case, the 800 or 900 series Data Element Identifier should be separated from the free format text by a slash (/). In case of coded text the involved parties should agree on a common code set.

TRF Traffic Restriction Information C0-1 E007 TRAFFIC RESTRICTION INFORMATION C9 8015 Traffic Restriction, coded C an..3 Traffic Restriction Code. Indicates that certain restrictions

apply to the carriage of passengers cargo and/or mail. See SSIM Appendix G for code set.

8017 Traffic Restriction Type, coded C an..3 1 Traffic Restriction Applicable to Passengers Only 2 Traffic Restriction Applicable to Cargo/Mail Only 3 Traffic Restriction Applicable to Cargo Only 4 Traffic Restriction Applicable to Mail Only 8035 Traffic Restriction Type Qualifier, coded C an..3 1 Traffic Restriction Code Qualifier at Board Point 2 Traffic Restriction Code Qualifier at Off Point 3 Traffic Restriction Code Qualifier at Board and Off Points 4440 Free text C an..70 Traffic Restriction Text Information SG4 END SG2 END SG1 END UIT Interactive Message Trailer M 0340 INTERACTIVE MESSAGE REFERENCE NUMBER C an..35 Message Serial Number 0074 NUMBER OF SEGMENTS IN THE MESSAGE C n..10 Count includes UIH and UIT.

Page 64: Ssim Impguide 03 1 Oct03

EDIFACT Implementation Guide – Scheduling Messages

ISSUE DATE: OCTOBER 2003 56

4.5 MESSAGE EXAMPLES

Single sector flight

UIB+UNOA:4+REF 123/449++++SR:04+OAG:04+970401:1225’ UIH+SKDUPD:97:1::IA+1++1:F’ MSD+1:18’ Complete schedule update ORG+SR:GVA’ Originator information HDR+K+L:01APR9200XXX00+ABC1234+01APR92+ ANYTITLE’ Header information IFT++ANY TEXT’ Free text TRA+SR+544::A’ Flight Designator with ops suffix EQP+G+M80+SR:LH:SR’ Equipment/Owner/Employers PDT+1+F:::N+C:::N+Y+M+L’ PRBD with PRBM PDT+2+F:10+C:20+M:100’ ACV CAR+R:LH+P:UA’ Joint Operation SER+9’ Non-Smoking Flight PER+L:12AUG9230SEP92+1234567’ Period/frequency PRT+GVA++1915’ Departure Times/Terminals PRT+LHR+2100++2:3’ Arrival Times/Terminals OPS++5+SR+545’ Onward flight IFT++ANY TEXT’ Free text .............repeat for more periods (PER) .............repeat for more flights (TRA) UIT+1+2010’ .............repeat for more Carriers (UIH) UIZ+REF 123/449+1’ Multi-sector flight UIB+UNOA:4+REF 123/449++++BA:04+ABC:04+970401:1225’ UIH+SKDUPD:97:1::IA+1++1:C’ MSD+1:4’ Partial schedule update ORG+BA:LHR’ Originator information HDR+K+L:01APR9200XXX00+BA1234+01APR92+ANYTITLE’ Header information TRA+BA+219’ Flight Designator EQP+J+747’ Equipment PDT+1+F+J+M+S+B+K+Q+V’ PRBD PDT+2+F+J+M’ ACV PER+L:12AUG9230SEP92+1234567++5’ Period/frequency (RPL) PRT+LHR++1130++4’ Departure Times/Terminals PRT+PHL+1425+1525+A+A’ Arrival/Departure Times/ Terminals PRT+PIT+1700’ Arrival Times/Terminals ODI+LHR+PHL’ Leg/segment PDT+1+QQQ::D’ Meal information for all classes ODI+PHL+PIT’ Leg/segment PDT+1+QQQ::C’ Meal information for all classes SER+9’ Non-smoking flight leg IFT++ANY TEXT’ Free text TRF+A’ Traffic Restriction information .............repeat for more periods (PER) .............repeat for more flights (TRA) UIT+1+2010’ .............repeat for more Carriers (UIH) UIZ+REF 123/449+1’

Page 65: Ssim Impguide 03 1 Oct03

Chapter 4 – Schedule Update (SKDUPD) Message

ISSUE DATE: OCTOBER 2003 57

Single sector codeshare flight UIB+UNOA:4+REF 123/449++++BA:04+ABC:04+970401:1225’ UIH+SKDUPD:97:1::IA+1++1:C’ MSD+1:4’ Partial schedule update ORG+BA:LHR’ Originator information HDR+K+L:01APR9200XXX00+BA1234+01APR92+ANYTITLE’ Header information TRA+BA+7486’ Flight Designator PDT+1+F::S+J::S+M::S+S::S+B::S+K::S+Q::S+V::S’ PRBD/Meals PDT+2+F+M’ ACV CAR+S:US’ Codeshare SER+9’ Non-smoking flight TRF+Y’ Traffic Restriction information PER+L:12AUG9230SEP92+123457++3’ Period/frequency (NEW) PRT+IND++1305’ Departure Times/Terminals PRT+PIT+1515’ Arrival Times/Terminals EQP+J+733+US:US:US’ Equipment/Owner/Employers PER+L:12AUG9230SEP92+6’ Another period/frequency PRT+IND++1305’ Departure Times/Terminals PRT+PIT+1515’ Arrival Times/Terminals EQP+J+DC9+US:US:US’ Equipment/Owner/Employers .............repeat for more periods (PER) .............repeat for more flights (TRA) UIT+1+2010’ .............repeat for more Carriers (UIH) UIZ+REF 123/449+1’

Page 66: Ssim Impguide 03 1 Oct03

EDIFACT Implementation Guide – Scheduling Messages

ISSUE DATE: OCTOBER 2003 58

Intentionally left blank.

Page 67: Ssim Impguide 03 1 Oct03

59

CHAPTER 5 – SCHEDULE CANCELLATION (SKDUPD) MESSAGE

5.1 MESSAGE FUNCTION Purpose: To transmit schedule cancellation information for the service specified in the TRA Segment of the Message, for the period and frequency specified in the PER Segment of the Message and, optionally, for the leg(s) specified in the ODI Segments of the Message. The Message will include all Mandatory Data Elements, and may include one or more Conditional Data Elements.

5.2 RULES FOR MESSAGE CONSTRUCTION

UIH M1 Message header MSD M1 Message action details ORG M1 Originator details HDR M1 Message header information IFT C0-1 Free Text Group 1 M1-99999 TRA M1 Transport Identifier information IFT C0-1 Free Text Group 2 M1-999 PER M1 Period/frequency information Group 4 C0-999 ODI M1 Origin/Destination UIT M1 Message trailer

Page 68: Ssim Impguide 03 1 Oct03

EDIFACT Implementation Guide – Scheduling Messages

ISSUE DATE: OCTOBER 2003 60

5.3 MESSAGE BRANCHING DIAGRAM

UIH

M1 M1 M1 M1 C99

MSD ORG HDR IFTUIT

GR.1

M99999

M1

M1

M999

GR.2

GR.4

C999

M1

C1

TRA

IFT PER

ODI

M1LEVEL 0

LEVEL 1

LEVEL 2

LEVEL 3

SKDUPD - Schedule Update / Schedule Cancellation

The use of the ODI Segment is restricted to specifying the leg(s) of a flight itinerary which is (are) cancelled when the cancellation is specified as ad hoc in the MSD Segment and does not apply to all legs of the flight itinerary.

Page 69: Ssim Impguide 03 1 Oct03

Chapter 5 – Schedule Cancellation (SKDUPD) Message

ISSUE DATE: OCTOBER 2003 61

5.4 EDIFACT SEGMENTS

Segment ID and Name Data Element Tag and Name Data Format

Codes Status IATA Explanatory Notes UIH INTERACTIVE MESSAGE HEADER M S306 INTERACTIVE MESSAGE IDENTIFIER M 0065 Message type M an..6 SKDUPD 0052 Message version number M an..3 00 0054 Message release number M an..3 2 0113 Message type sub-function identification * 0051 Controlling agency, coded C an..3 IA 0057 Association assigned code * 0340 INTERACTIVE MESSAGE REFERENCE NUMBER C an..35 Message Serial Number S302 DIALOGUE REFERENCE * 0300 Initiator control reference M an..35 0303 Initiator reference identification C an..35 0051 Controlling agency, coded C an..3 0304 Message subset release number C an..35 S301 STATUS OF THE TRANSFER — INTERACTIVE C 0320 Sender sequence number C n..6 Starts at 1 and is incremented by 1 for each transfer 1 0323 Transfer position, coded C a1 Continuation/End Code. C Conitinuation Code F End Code 0325 Duplicate indicator C a1 Set = D if the interchange is a duplicate, otherwise not used. S300 DATE AND/OR TIME OF INITIATION * 0338 Event date C n..8 0314 Event time C an..15 0336 Time offset C n4 0035 TEST INDICATOR C n1 Set =1 if the interchange is a test. MSD MESSAGE ACTION DETAILS M E972 MESSAGE PROCESSING DETAILS C 4025 Business function, coded C an..3 1 Air 1225 Message function, coded C an..3 1 Cancellation – to basic schedule A4 Partial schedule update – ad hoc changes/additions/deletions

to schedule

Page 70: Ssim Impguide 03 1 Oct03

EDIFACT Implementation Guide – Scheduling Messages

ISSUE DATE: OCTOBER 2003 62

Segment ID and Name Data Element Tag and Name Data Format

Codes Status IATA Explanatory Notes 3055 Code list responsible agency, coded C an..3 * or set to “3’’ 1225 Message function, coded * 4343 RESPONSE TYPE, CODED * 4343 RESPONSE TYPE, CODED * ORG Originator of Request Details M E973 DELIVERING SYSTEM DETAILS C To specify the system and its location that originates or

delivers the message for a third party. 3036 Party name C an..35 Airline Designator. See IATA Airline Coding Directory for

code set. If more than three characters are used then it is assumed that the full company name is being specified. The full company name should be used when a duplicate IATA designator is in use for the specified company.

3225 Place/Location identification C an..25 See IATA Airline Coding Directory. IATA 3 letter city/airport code

3224 Place/Location name C an..70 Used only when a code does not exist E974 ORIGINATOR IDENTIFICATION DETAILS * 3197 Agent identification C an..9 3465 In-house identification C an..9 3197 Agent identification C an..9 3036 Party name C an..35 E975 LOCATION C 3225 Place/Location identification C an..25 See IATA Airline Coding Directory. IATA 3 letter

city/airport code 3224 Place/Location name C an..70 Used only when a code does not exist 3036 PARTY NAME * 3457 ORIGINATOR TYPE CODED * E976 ORIGINATOR DETAILS * 3207 Country, coded C an..3 6345 Currency, coded C an..3 3453 Language, coded C an..3 3503 ORIGINATORS AUTHORITY IDENTIFICATION * HDR Header information M 4405 STATUS, CODED M an..3 Schedule Status K Confirmed, Effective, Working, Firm, etc. P Provisional, Draft, Proposed, Subject to Change, etc. E507 DATE/TIME/PERIOD M 2005 Date/Time/Period qualifier M an..3 Time Mode, mandatory L Local Time Mode U UTC Time Mode 2380 Date/Time/Period C an..35 Period of Schedule Validity, mandatory for bulk data

transmission 2379 Date/Time/Period format qualifier * 1154 REFERENCE NUMBER C an..35 Creator’s Reference 2380 TIME/DATE/PERIOD C an..35 Release (Sell) Date

Page 71: Ssim Impguide 03 1 Oct03

Chapter 5 – Schedule Cancellation (SKDUPD) Message

ISSUE DATE: OCTOBER 2003 63

Segment ID and Name Data Element Tag and Name Data Format

Codes Status IATA Explanatory Notes 4440 FREE TEXT C an..70 Title of Data 7135 PRODUCT IDENTIFICATION * an..35 7135 PRODUCT IDENTIFICATION * an..35 IFT Interactive Free Text C0-1 E971 FREE TEXT QUALIFICATION C 4451 Text Subject Qualifier M an..3 ZZZ Mutually defined (Bilateral or Internal information) 4473 Information type identification C an..4 4405 Status, coded * 3036 Party name * 3453 Language, coded * 4440 FREE TEXT C99 When used with code ZZZ in data element 4451, for

bilateral or internal information, the existing SSIM Data Element Identifiers in the 800 and 900 series may be used. In this case, the 800 or 900 series Data Element Identifier should be separated from the free format text by a slash (/). In case of coded text the involved parties should agree on a common code set.

SG1 START M1-99999 TRA Transport Identifier to be Updated/Cancelled M E988 COMPANY IDENTIFICATION M 3036 Party name M an.35 Only the first occurrence of the data

element is used, and it specifies the Airline Designator of the Administrating Carrier. See IATA Airline Coding Directory for code set. If more than three characters are used then it is assumed that the full company name is being specified.

3036 Party name * 3036 Party name * E989 PRODUCT IDENTIFICATION DETAILS C 7135 Product Identification M an..35 To indicate a service identification i.e. a Flight Number or

an identification of a ground event. If not stated, then cancellations or requests for repeat information apply to all services for specified company. Must be stated if complete or partial new schedule information being transmitted.

7037 Characteristic Identification * 7139 Product Identification Characteristic C an..3 Operational Suffix - single alpha character. 7009 Item Description Identification C an..7 Change Reason See SSIM Chapter 2 Change Reason for

code set. 7009 Item Description Identification C an..7 Change Reason See SSIM Chapter 2 Change Reason for

code set. 7009 Item Description Identification C an..7 Change Reason See SSIM Chapter 2 Change Reason for

code set. IFT Interactive Free Text C0-1 E971 FREE TEXT QUALIFICATION C 4451 Text Subject Qualifier M an..3 ZZZ Mutually defined (Bilateral or Internal information) 4473 Information type identification C an..4 4405 Status, coded *

Page 72: Ssim Impguide 03 1 Oct03

EDIFACT Implementation Guide – Scheduling Messages

ISSUE DATE: OCTOBER 2003 64

Segment ID and Name Data Element Tag and Name Data Format

Codes Status IATA Explanatory Notes 3036 Party name * 3453 Language, coded * 4440 FREE TEXT C99 When used with code ZZZ in data element 4451, for

bilateral or internal information, the existing SSIM Data Element Identifiers in the 800 and 900 series may be used. In this case, the 800 or 900 series Data Element Identifier should be separated from the free format text by a slash (/). In case of coded text the involved parties should agree on a common code set.

SG2 START M1-999 PER Date/Time/Period M E507 DATE/TIME/PERIOD M 2005 Date/time/period qualifier M an..3 Time Mode, mandatory. Must be the same as in the HDR

Segment. L Local Time Mode U UTC Time Mode 2380 Date/time/period C an..35 Period of Operation, mandatory. When ad hoc change/

addition/cancellation is being specified, the Period of Operation must only cover a single date.

2379 Date/time/period format qualifier * 6072 FREQUENCY VALUE M n..9 Day(s) of Operation 6071 FREQUENCY QUALIFIER C an..3 Frequency Rate 1245 STATUS INDICATOR, CODED C an..3 Action Identifier and, optionally, ASM Withdrawal

Indicator. Only used for partial schedule updates, when it is mandatory.

2 Cancellation Action Identifier - CNL AW2 Cancellation with ASM Withdrawal Indicator. Action

Identifier - CNL SG4 START C0-999 ODI Origin and Destination Details M 3225 PLACE/LOCATION IDENTIFICATION C an..25 Origin Station. Mandatory. See IATA Airline Coding

Directory. IATA 3 letter city/airport code. 3225 PLACE/LOCATION IDENTIFICATION C an..25 Destination Station. Mandatory. See IATA Airline Coding

Directory. IATA 3 letter city/airport code. SG4 END SG2 END SG1 END UIT Interactive Message Trailer M 0340 INTERACTIVE MESSAGE REFERENCE NUMBER C an..35 Message Serial Number 0074 NUMBER OF SEGMENTS IN THE MESSAGE C n..10 Count includes UIH and UIT.

Page 73: Ssim Impguide 03 1 Oct03

Chapter 5 – Schedule Cancellation (SKDUPD) Message

ISSUE DATE: OCTOBER 2003 65

5.5 MESSAGE EXAMPLES

UIB+UNOA:4+REF 123/449++++SR:04+OAG:04+970401:1225’ UIH+SKDUPD:97:1::IA+1++1:C’ MSD+1:1’ Cancellation ORG+SR:GVA’ Originator information HDR+K+L+REF 123/449+01APR92+ANYTITLE’ Header information IFT++ANY TEXT’ Free text TRA+SR+544’ Flight Designator IFT++ANY TEXT’ Free text PER+L:12AUG9230SEP92+1234567’ Period/frequency .............repeat for more periods (PER) .............repeat for more flights (TRA) UIT+1+9’ .............repeat for more Carriers (UIH) UIZ+REF 123/449+9’ UIB+UNOA:4+REF 123/449++++SR:04+OAG:04+970401:1225’ UIH+SKDUPD:97:1::IA+1++1:C’ MSD+1:A4’ Partial schedule update — ad hoc ORG+SR:GVA’ Originator information HDR+K+L+REF 123/449+01APR92+ANYTITLE’ Header information IFT++ANY TEXT’ Free text TRA+SR+544’ Flight Designator IFT++ANY TEXT’ Free text PER+L:12AUG9412AUG94+5++2’ Period/frequency (CNL) .............repeat for more periods (PER) .............repeat for more flights (TRA) UIT+1+9’ .............repeat for more Carriers (UIH) UIZ+REF 123/449+9’

Page 74: Ssim Impguide 03 1 Oct03

EDIFACT Implementation Guide – Scheduling Messages

ISSUE DATE: OCTOBER 2003 66

Intentionally left blank.

Page 75: Ssim Impguide 03 1 Oct03

67

CHAPTER 6 – SCHEDULE INFORMATION REPEAT REQUEST (SKDUPD) MESSAGE

6.1 MESSAGE FUNCTION Purpose: To transmit a request for a repeat of schedule information for the service specified in the TRA Segment of the Message, for the period and frequency specified in the PER Segment of the Message. The Message will include all Mandatory Data Elements, and may include one or more Conditional Data Elements.

6.2 RULES FOR MESSAGE CONSTRUCTION

UIH M1 Message header MSD M1 Message action details ORG M1 Originator details HDR M1 Message header information IFT C0-1 Free Text Group 1 M1-99999 TRA M1 Transport Identifier information IFT C0-1 Free Text Group 2 M1-999 PER M1 Period/frequency information UIT M1 Message trailer

Page 76: Ssim Impguide 03 1 Oct03

EDIFACT Implementation Guide – Scheduling Messages

ISSUE DATE: OCTOBER 2003 68

6.3 MESSAGE BRANCHING DIAGRAM

UIH

M1 M1 M1 M1 C99

MSD ORG HDR IFTUIT

GR.1

M99999

M1

M1

M999

GR.2

C1

TRA

IFT PER

M1LEVEL 0

LEVEL 1

LEVEL 2

LEVEL 3

SKDUPD - Schedule Update / Schedule Information Repeat Request

Page 77: Ssim Impguide 03 1 Oct03

Chapter 6 – Schedule Information Repeat Request (SKDUPD) Message

ISSUE DATE: OCTOBER 2003 69

6.4 EDIFACT SEGMENTS

Segment ID and Name Data Element Tag and Name Data Format

Codes Status IATA Explanatory Notes UIH INTERACTIVE MESSAGE HEADER M

S306 INTERACTIVE MESSAGE IDENTIFIER M 0065 Message type M an..6 SKDUPD 0052 Message version number M an..3 00 0054 Message release number M an..3 2 0113 Message type sub-function identification * 0051 Controlling agency, coded C an..3 IA 0057 Association assigned code * 0340 INTERACTIVE MESSAGE REFERENCE NUMBER C an..35 Message Serial Number S302 DIALOGUE REFERENCE * 0300 Initiator control reference M an..35 0303 Initiator reference identification C an..35 0051 Controlling agency, coded C an..3 0304 Message subset release number C an..35 S301 STATUS OF THE TRANSFER — INTERACTIVE C 0320 Sender sequence number C n..6 Starts at 1 and is incremented by 1 for each transfer 1 0323 Transfer position, coded C a1 Continuation/End Code. C Continuation Code F End Code 0325 Duplicate indicator C a1 Set = D if the interchange is a duplicate, otherwise not used. S300 DATE AND/OR TIME OF INITIATION * 0338 Event date C n..8 0314 Event time C an..15 0336 Time offset C n4 0035 TEST INDICATOR C n1 Set =1 if the interchange is a test. MSD MESSAGE ACTION DETAILS M E972 MESSAGE PROCESSING DETAILS C 4025 Business function, coded C an..3 1 Air 1225 Message function, coded C an..3 13 Request for a repeat of schedule information A4 Partial schedule update – ad hoc changes/additions/deletions

to schedule 3055 Code list responsible agency, coded C an..3 * or set to “3’’ 1225 Message function, coded * 4343 RESPONSE TYPE, CODED * 4343 RESPONSE TYPE, CODED *

Page 78: Ssim Impguide 03 1 Oct03

EDIFACT Implementation Guide – Scheduling Messages

ISSUE DATE: OCTOBER 2003 70

Segment ID and Name Data Element Tag and Name Data Format

Codes Status IATA Explanatory Notes ORG Originator of Request Details M E973 DELIVERING SYSTEM DETAILS C To specify the system and its location that originates or

delivers the message for a third party. 3036 Party name C an..35 Airline Designator. See IATA Airline Coding Directory for

code set. If more than three characters are used then it is assumed that the full company name is being specified. The full company name should be used when a duplicate IATA designator is in use for the specified company.

3225 Place/Location identification C an..25 See IATA Airline Coding Directory. IATA 3 letter city/airport code

3224 Place/Location name C an..70 Used only when a code does not exist E974 ORIGINATOR IDENTIFICATION DETAILS * 3197 Agent identification C an..9 3465 In-house identification C an..9 3197 Agent identification C an..9 3036 Party name C an..35 E975 LOCATION C 3225 Place/Location identification C an..25 See IATA Airline Coding Directory. IATA 3 letter

city/airport code 3224 Place/Location name C an..70 Used only when a code does not exist 3036 PARTY NAME * 3457 ORIGINATOR TYPE CODED * E976 ORIGINATOR DETAILS * 3207 Country, coded C an..3 6345 Currency, coded C an..3 3453 Language, coded C an..3 3503 ORIGINATORS AUTHORITY IDENTIFICATION * HDR Header information M 4405 STATUS, CODED M an..3 Schedule Status K Confirmed, Effective, Working, Firm, etc. P Provisional, Draft, Proposed, Subject to Change, etc. E507 DATE/TIME/PERIOD M 2005 Date/Time/Period qualifier M an..3 Time Mode, mandatory L Local Time Mode U UTC Time Mode 2380 Date/Time/Period C an..35 Period of Schedule Validity, mandatory for bulk data

transmission 2379 Date/Time/Period format qualifier * 1154 REFERENCE NUMBER C an..35 Creator’s Reference 2380 TIME/DATE/PERIOD C an..35 Release (Sell) Date 4440 FREE TEXT C an..70 Title of Data 7135 PRODUCT IDENTIFICATION * an..35 . 7135 PRODUCT IDENTIFICATION * an..35

Page 79: Ssim Impguide 03 1 Oct03

Chapter 6 – Schedule Information Repeat Request (SKDUPD) Message

ISSUE DATE: OCTOBER 2003 71

Segment ID and Name Data Element Tag and Name Data Format

Codes Status IATA Explanatory Notes IFT Interactive Free Text C0-1 E971 FREE TEXT QUALIFICATION C 4451 Text Subject Qualifier M an..3 ZZZ Mutually defined (Bilateral or Internal information) 4473 Information type identification C an..4 4405 Status, coded * 3036 Party name * 3453 Language, coded * 4440 FREE TEXT C99 an..70 When used with code ZZZ in data element 4451, for

bilateral or internal information, the existing SSIM Data Element Identifiers in the 800 and 900 series may be used. In this case, the 800 or 900 series Data Element Identifier should be separated from the free format text by a slash (/). In case of coded text the involved parties should agree on a common code set.

SG1 START M1-99999 TRA Transport Identifier to be Updated/Cancelled M E988 COMPANY IDENTIFICATION M 3036 Party name M an.35 Only the first occurrence of the data

element is used, and it specifies the Airline Designator of the Administrating Carrier. See IATA Airline Coding Directory for code set. If more than three characters are used then it is assumed that the full company name is being specified.

3036 Party name * 3036 Party name * E989 PRODUCT IDENTIFICATION DETAILS C 7135 Product Identification M an..35 To indicate a service identification i.e. a Flight Number or

an identification of a ground event. If not stated, then cancellations or requests for repeat information apply to all services for specified company. Must be stated if complete or partial new schedule information being transmitted.

7037 Characteristic Identification * 7139 Product Identification Characteristic C an..3 Operational Suffix - single alpha character. 7009 Item Description Identification C an..7 Change Reason See SSIM Chapter 2 Change Reason for

code set. 7009 Item Description Identification C an..7 Change Reason See SSIM Chapter 2 Change Reason for

code set. 7009 Item Description Identification C an..7 Change Reason See SSIM Chapter 2 Change Reason for

code set. IFT Interactive Free Text C0-1 E971 FREE TEXT QUALIFICATION C 4451 Text Subject Qualifier M an..3 ZZZ Mutually defined (Bilateral or Internal information) 4473 Information type identification C an..4 4405 Status, coded * 3036 Party name * 3453 Language, coded * 4440 FREE TEXT C99 When used with code ZZZ in data element 4451, for

bilateral or internal information, the existing SSIM Data Element Identifiers in the 800 and 900 series may be used. In this case, the 800 or 900 series Data Element Identifier should be separated from the free format text by a slash (/). In case of coded text the involved parties should agree on a common code set.

Page 80: Ssim Impguide 03 1 Oct03

EDIFACT Implementation Guide – Scheduling Messages

ISSUE DATE: OCTOBER 2003 72

Segment ID and Name Data Element Tag and Name Data Format

Codes Status IATA Explanatory Notes SG2 START M1-999 PER Date/Time/Period M E507 DATE/TIME/PERIOD M 2005 Date/time/period qualifier M an..3 Time Mode, mandatory. Must be the same as in the HDR

Segment. L Local Time Mode U UTC Time Mode 2380 Date/time/period C an..35 Period of Operation, mandatory. When ad hoc change/

addition/cancellation is being specified, the Period of Operation must only cover a single date.

2379 Date/time/period format qualifier * 6072 FREQUENCY VALUE M n..9 Day(s) of Operation 6071 FREQUENCY QUALIFIER C an..3 Frequency Rate 1245 STATUS INDICATOR, CODED * an..3 SG2 END SG1 END UIT Interactive Message Trailer M 0340 INTERACTIVE MESSAGE REFERENCE NUMBER C an..35 Message Serial Number 0074 NUMBER OF SEGMENTS IN THE MESSAGE C n..10 Count includes UIH and UIT.

Page 81: Ssim Impguide 03 1 Oct03

Chapter 6 – Schedule Information Repeat Request (SKDUPD) Message

ISSUE DATE: OCTOBER 2003 73

6.5 MESSAGE EXAMPLES

UIB+UNOA:4+REF 123/449++++ABC:04+SR:04+970401:1225’ UIH+SKDUPD:97:1::IA+1++1:F’ MSD+1:13’ Request repeat schedule information ORG+ABC:LTN’ Originator information HDR+K+L+REF 123/449’ Header information IFT++ANY TEXT’ Free text TRA+SR+544’ Flight Designator IFT++ANY TEXT’ Free text PER+L:12AUG9230SEP92+1234567’ Period/frequency .............repeat for more periods (PER) .............repeat for more flights (TRA) UIT+1+9’ .............repeat for more Carriers (UIH) UIZ+REF 123/449+1’ UIB+UNOA:4+REF 123/449++++ABC:04+SR:04+970401:1225’ UIH+SKDUPD:97:1::IA+1++1:F’ MSD+1:13’ Request repeat schedule information ORG+ABC:LTN’ Originator information HDR+K+L+REF 123/449’ Header information IFT++ANY TEXT’ Free text TRA+SR’ Carrier IFT++ANY TEXT’ Free text PER+L:01APR9200XXX00+1234567’ Period/frequency .............repeat for more periods (PER) .............repeat for more flights/Carriers (TRA) UIT+1+9’ .............repeat for more Carriers (UIH) UIZ+REF 123/449+1’

Page 82: Ssim Impguide 03 1 Oct03

EDIFACT Implementation Guide – Scheduling Messages

ISSUE DATE: OCTOBER 2003 74

Intentionally left blank.

Page 83: Ssim Impguide 03 1 Oct03

75

CHAPTER 7 –TRANSPORT SERVICE UPDATE (TRAUPD) MESSAGE

7.1 MESSAGE FUNCTION Purpose: To transmit new or updated schedule and/or current information for the Transport Service specified in the TRA and PER Segments of the Message. Each Message will include all Mandatory Data Elements, and may include one or more Conditional Data Elements.

7.2 RULES FOR MESSAGE CONSTRUCTION

UIH M1 Message header MSD M1 Message action details ORG M1 Originator details HDR M1 Message header information IFT C0-99 Free text Group 1 M1-9999 TRA M1 Transport Identifier information Group 2 M1-999 PER M1 Date information Group 3 M1-9 SDT M1 Selection details Group 4 C2-99 PRT M1 Timing/Terminals information OPS C0-9 Port of call information Group 5 C0-999 ODI M1 Origin/Destination details EQP C0-1 Equipment information PDT C0-9 Product information CAR C0-1 Commercial agreements SER C0-1 Additional service information TRF C0-1 Traffic restriction information DAT C0-99 Movement information SPI C0-999 Specific data information STX C0-1 Status details IFT C0-99 Free text UIT M1 Message trailer

Page 84: Ssim Impguide 03 1 Oct03

EDIFACT Implementation Guide – Scheduling Messages

ISSUE DATE: OCTOBER 2003 76

7.3 MESSAGE BRANCHING DIAGRAM

UIHM1

MSD

M1

ORG

M1

HDR

M1

IFT

C1UIT

M1

OPS

C9

EQP

C1

PDT

C9

CAR

C1

SER

C1

TRF

C1

DAT

C99

STX

C1

IFT

C99

GR4M99PRT

M1

GR5C999ODIM1

GR3M9SDTM1

GR2M999PERM1

GR1

M9999TRAM1

Level 0

Level 1

Level 2

Level 3

Level 4

Level 5 SPIC999

The Selection Details Segments (SDT) start the, in normal cases, 2 data blocks of a TRAUPD message, containing schedule and current data. Under certain circumstances it may be useful to transmit historical data, e.g. the planned routing in case of a rerouting or diversion, an additional SDT block might be used. The first block contains only schedule data, more or less in the same format as in a SKDUPD message, the second block contains current transport service related data. Obviously, it is possible to transmit schedule data using a SKDUPD message, but when operational data are transmitted it may be useful to forward schedule and current data in one message. In the schedule block only the Segments defined in SKDUPD may be used, i.e. PRT, OPS, EQP, PDT, CAR, SER, TRF and IFT. Unlike in SKDUPD the EQP, PDT, CAR, SER, TRF and IFT Segments may only appear at the lowest level, i.e. under an ODI, not under TRA or PER. If they apply to the entire journey, they should be stated under an empty ODI Segment.

Page 85: Ssim Impguide 03 1 Oct03

Chapter 7 – Transport Service Update (TRAUPD) Message

ISSUE DATE: OCTOBER 2003 77

OPS

C9

EQP

C1

PDT

C9

CAR

C1

SER

C1

TRF

C1

IFT

C99

GR4

M99

PRT

M1

GR5

C999

ODI

M1

Level 4

Level 5

In the current data block PRT, OPS, EQP, CAR and TRF must not be used. PDT, SER and IFT may be used, but data fields defined in SKDUPD may not be used. In PDT only information not altering the type of means of transport (ACV) is allowed, e.g. movable class dividers or convertible seats. SER is the Segment to state current service information, e.g. gates, positions or the current movie.

PDT

C9

SER

C1

DAT

C99

STX

C1

IFT

C99

GR5

C999

ODI

M1

Level 4

Level 5 SPI

C999

PRT (terminal/time) information shall be ordered according to the occurrence of the location within the complete itinerary. For example, if the complete itinerary is AAA-BBB-CCC-DDD, then the PRT information should be stated for AAA first, followed by BBB, then CCC and lastly DDD. ODI (origin and destination) information shall be ordered in a way that information applicable to the complete service appears first, then information applicable to departure and arrival locations in their appropriate order. Finally information applicable to segments or legs shall be ordered according to the occurrence of the place of departure location within the complete itinerary. When multiple use of ODI occurs with the same place of departure location, they should appear together and be ordered according to the occurrence of the place of arrival location within the complete itinerary. A specific ODI must not be used more than once.

Page 86: Ssim Impguide 03 1 Oct03

EDIFACT Implementation Guide – Scheduling Messages

ISSUE DATE: OCTOBER 2003 78

7.4 EDIFACT SEGMENTS

Segment ID and Name Data Element Tag and Name Data Format

Codes Status IATA Explanatory Notes UIH INTERACTIVE MESSAGE HEADER M S306 INTERACTIVE MESSAGE IDENTIFIER M 0065 Message type M an..6 TRAUPD 0052 Message version number M an..3 00 0054 Message release number M an..3 2 0113 Message type sub-function identification * 0051 Controlling agency, coded C an..3 IA 0057 Association assigned code * 0340 INTERACTIVE MESSAGE REFERENCE NUMBER C an..35 Message Serial Number S302 DIALOGUE REFERENCE * 0300 Initiator control reference M an..35 0303 Initiator reference identification C an..35 0051 Controlling agency, coded C an..3 0304 Message subset release number C an..35 S301 STATUS OF THE TRANSFER — INTERACTIVE C 0320 Sender sequence number C n..6 Starts at 1 and is incremented by 1 for each transfer 1 0323 Transfer position, coded C a1 Continuation/End Code. C Continuation Code F End Code 0325 Duplicate indicator C a1 Set = D if the interchange is a duplicate, otherwise not used. S300 DATE AND/OR TIME OF INITIATION * 0338 Event date C n..8 0314 Event time C an..15 0336 Time offset C n4 0035 TEST INDICATOR C n1 Set =1 if the interchange is a test. MSD MESSAGE ACTION DETAILS M E972 MESSAGE PROCESSING DETAILS C 4025 Business function, coded C an..3 1 Air 1225 Message function, coded C an..3 1 Cancellation – to basic schedule 4 Partial schedule update – to basic schedule 13 Request for a repeat of schedule information 18 Complete new schedule information – basic schedule 42 Event, non-flight movement related 82 Flight information movement function 83 Flight information diversion function A4 Partial schedule update – ad hoc changes/additions/deletions

to schedule

Page 87: Ssim Impguide 03 1 Oct03

Chapter 7 – Transport Service Update (TRAUPD) Message

ISSUE DATE: OCTOBER 2003 79

Segment ID and Name Data Element Tag and Name Data Format

Codes Status IATA Explanatory Notes F18 Complete new schedule information for a flight number

range – basic schedule 3055 Code list responsible agency, coded * an..3 * or set to “3’’ 1225 Message function, coded * 4343 RESPONSE TYPE, CODED * 4343 RESPONSE TYPE, CODED * ORG Originator of Request Details M E973 DELIVERING SYSTEM DETAILS C To specify the system and its location that originates or

delivers the message for a third party. 3036 Party name C an..35 Airline Designator. See IATA Airline Coding Directory for

code set. If more than three characters are used then it is assumed that the full company name is being specified. The full company name should be used when a duplicate IATA designator is in use for the specified company.

3225 Place/Location identification C an..25 See IATA Airline Coding Directory. IATA 3 letter city/airport code

3224 Place/Location name C an..70 Used only when a code does not exist E974 ORIGINATOR IDENTIFICATION DETAILS * 3197 Agent identification C an..9 3465 In-house identification C an..9 3197 Agent identification C an..9 3036 Party name C an..35 E975 LOCATION C 3225 Place/Location identification C an..25 See IATA Airline Coding Directory. IATA 3 letter

city/airport code 3224 Place/Location name C an..70 Used only when a code does not exist 3036 PARTY NAME * 3457 ORIGINATOR TYPE CODED * E976 ORIGINATOR DETAILS * 3207 Country, coded C an..3 6345 Currency, coded C an..3 3453 Language, coded C an..3 3503 ORIGINATORS AUTHORITY IDENTIFICATION * HDR Header information M 4405 STATUS, CODED M an..3 Schedule Status E507 DATE/TIME/PERIOD M 2005 Date/Time/Period qualifier M an..3 Time Mode, mandatory L Local Time Mode U UTC Time Mode 2380 Date/Time/Period * 2379 Date/Time/Period format qualifier * 1154 REFERENCE NUMBER C an..35 Creator’s Reference 2380 TIME/DATE/PERIOD C an..35 Release (Sell) Date

Page 88: Ssim Impguide 03 1 Oct03

EDIFACT Implementation Guide – Scheduling Messages

ISSUE DATE: OCTOBER 2003 80

Segment ID and Name Data Element Tag and Name Data Format

Codes Status IATA Explanatory Notes 4440 FREE TEXT C an..70 7135 PRODUCT IDENTIFICATION * an..35 7135 PRODUCT IDENTIFICATION * an..35 IFT Interactive Free Text C0-99 E971 FREE TEXT QUALIFICATION C 4451 Text Subject Qualifier M an..3 APT Airport related information CAT Catering information CHG Change Information CKI Check-in IFC Interface information NAM Name OPS Operations information PRD Product Information SAF Safety Information SIM IATA SSIM defined information SPH Special handling STN Statutory notice TRA Transportation information VEH Vehicle related information WAB Weight and balance information ZZZ Mutually defined (Bilateral or Internal information) 4473 Information type identification C an..4 AC Aircraft information (to be used with text subject qualifier

OPS) AHS Arrival high security flight (to be used with text subject

qualifier SIM) BN Boarding number (to be used with text subject qualifier

CKI) CCV Check in control VDT (to be used with text subject qualifier

CKI) CFT Calculated flying time (to be used with text subject qualifier

OPS) CTL Operations control unit (to be used with text subject

qualifier OPS) DHS Departure high security flight (be used with text subject

qualifier SIM) ISD In Flight Service Information default (to be used with text

subject qualifier SIM) MCA Row after movable class divider (to be used with text

subject qualifier VEH) MCB Row before movable class divider (to be used with text

subject qualifier VEH)

Page 89: Ssim Impguide 03 1 Oct03

Chapter 7 – Transport Service Update (TRAUPD) Message

ISSUE DATE: OCTOBER 2003 81

Segment ID and Name Data Element Tag and Name Data Format

Codes Status IATA Explanatory Notes MCD Movable class divider used (to be used with text subject

qualifier VEH) PVD PVD Protective cover VDT (to be used with text subject

qualifier CKI) RCP Recipient (to be used with text subject qualifier IFC) RMK Remark SFT Scheduled flying time (to be used with text subject qualifier

OPS) SV Check-in supervisory agent id (to be used with text subject

qualifier CKI) TA Traffic area (to be used with text subject qualifier OPS) TRG Trigger (to be used with text subject qualifier IFC) WB Accepted Baggage Weight in kg (to be used with text

subject qualifier CKI) WCB Accepted Cabin Weight in kg (to be used with text subject

qualifier CKI) WCL Check-in Weight Limit in kg (to be used with text subject

qualifier WAB) WN Weight Table Number in kg (to be used with text subject

qualifier CKI) WSB Stand-by Baggage Weight in kg (to be used with text

subject qualifier CKI) WT Accepted Weight in kg (to be used with text subject

qualifier CKI) 4405 Status, coded * 3036 Party name * 3453 Language, coded * 4440 FREE TEXT C99 When used with code ZZZ in data element 4451, for

bilateral or internal information, the existing SSIM Data Element Identifiers in the 800 and 900 series may be used. In this case, the 800 or 900 series Data Element Identifier should be separated from the free format text by a slash (/). In case of coded text the involved parties should agree on a common code set.

SG1 START M1-99999 TRA Transport Identifier to be Updated/Cancelled M E988 COMPANY IDENTIFICATION M 3036 Party name M an.35 Only the first occurrence of the data

element is used, and it specifies the Airline Designator of the Administrating Carrier. See IATA Airline Coding Directory for code set. If more than three characters are used then it is assumed that the full company name is being specified.

3036 Party name * 3036 Party name * E989 PRODUCT IDENTIFICATION DETAILS C 7135 Product Identification M an..35 To indicate a service identification i.e. a Flight Number or

an identification of a ground event. If not stated, then cancellations or requests for repeat information apply to all services for specified company. Must be stated if complete or partial new schedule information being transmitted.

Page 90: Ssim Impguide 03 1 Oct03

EDIFACT Implementation Guide – Scheduling Messages

ISSUE DATE: OCTOBER 2003 82

Segment ID and Name Data Element Tag and Name Data Format

Codes Status IATA Explanatory Notes 7037 Characteristic Identification * 7139 Product Identification Characteristic C an..3 Operational Suffix - single alpha character. 7009 Item Description Identification C an..7 Change Reason See SSIM Chapter 2 Change Reason for

code set. 7009 Item Description Identification C an..7 Change Reason See SSIM Chapter 2 Change Reason for

code set. 7009 Item Description Identification C an..7 Change Reason See SSIM Chapter 2 Change Reason for

code set. SG2 START M1-999 PER Date/Time/Period M E507 DATE/TIME/PERIOD M 2005 Date/time/period qualifier M an..3 Time Mode, mandatory. Must be the same as in the HDR

Segment. L Local Time Mode U UTC Time Mode 2380 Date/time/period C an..35 Date of Operation ex Origin 2379 Date/time/period format qualifier * 6072 FREQUENCY VALUE M n..9 Day(s) of Operation 6071 FREQUENCY QUALIFIER C an..3 Frequency Rate 1245 STATUS INDICATOR, CODED C an..3 Equivalent to Action Identifier and, optionally ASM

Withdrawal Indicator. 2RR Cancellation — leg rerouted 2DV Cancellation — leg diverted AA Actual Arrival — Movement AD Actual Departure — Movement ADM Change of administration information CON Change of aircraft configuration version DIV Flight / Leg diverted EA Estimated Arrival — Movement EB Estimated On Block — Movement ED Estimated Departure — Movement EQT Change of equipment information NI Next Info Departure — Movement RFA Return from Airborne — Movement RIN Flight reinstated RRT Flight rerouted RST Return to Stand / Ramp — Movement TIM Change of time information SG3 START M1-9 SDT Selection Details Information M E010 SELECTION DETAILS INFORMATION M99 4009 Option, coded M an..3 Used to distinguish between schedule and current data. SKD Schedule data CUR Current data DLG Dead leg data — Legs removed by diversion or rerouting

message HIS Historical data — not valid any more 4018 Associated option information C an..35 SG4 START C2-99 PRT Terminal/Time Information M E517 LOCATION IDENTIFICATION M 3225 Place/Location identification M an..25 Station. See IATA Airline Coding Directory. IATA 3 letter

city/airport code. 1131 Code list qualifier * 3055 Code list responsible agency, coded * 3224 Place/Location name * E362 TIME INFORMATION C

Page 91: Ssim Impguide 03 1 Oct03

Chapter 7 – Transport Service Update (TRAUPD) Message

ISSUE DATE: OCTOBER 2003 83

Segment ID and Name Data Element Tag and Name Data Format

Codes Status IATA Explanatory Notes 2002 First Time M n4 Scheduled Time of Aircraft Arrival (STA). 2002 Second Time C n4 Passenger STA 9986 UTC/Local Time Variation C n4 UTC/Local Time Variation 2148 Date Variation C n1 Date Variation of Scheduled Time of Aircraft Arrival. Variation is

assumed to be positive. If negative, use minus sign (-) before the numeric.

E362 TIME INFORMATION C 2002 First Time M n4 Scheduled Time of Aircraft Departure(STD). 2002 Second Time C n4 Passenger STD 9986 UTC/Local Time Variation C n4 UTC/Local Time Variation 2148 Date Variation C n1 Date Variation of Scheduled Time of Aircraft Departure. Variation is

assumed to be positive. If negative, use minus sign (-) before the numeric.

E992 POSITION C 3223 Related place/location one identification C an..25 Passenger Terminal Identifier — Arrival.

See SSIM Appendix D for code set. 3223 Related place/location one identification C an..25 Aircraft Terminal Identifier —Arrival.

See SSIM Appendix D for code set. E992 POSITION C 3223 Related place/location one identification C an..25 Passenger Terminal Identifier — Departure.

See SSIM Appendix D for code set. 3223 Related place/location one identification C an..25 Aircraft Terminal Identifier —Departure.

See SSIM Appendix D for code set. OPS Port of Call Information C0-9 E368 ON-TIME PERFORMANCE C 2380 Date/time/period M an.35 On-Time Performance Indicator 5482 Percentage C n..8 On-Time Performance Indicator 5245 Percentage qualifier C an..3 E370 PORT OF CALL DETAILS C 9984 Type of Call at Port C n..3 1 Technical Landing 2 Flaglanding 3 Plane Change without Aircraft Type Change 5 Onward Flight 9982 Restricted Payload C an..17 Restricted Payload 9417 Government Action, Coded * E988 COMPANY IDENTIFICATION C 3036 Party Name M3 an..35 Only the first occurrence of the data element is used, and it specifies the

Onward Flight or Passenger Check-In airline or agency — the Airline Designator of the Administrating Carrier or airline providing Passenger Check-In. See IATA Airline Coding Directory for code set. If more than three characters are used then it is assumed that the full company name is being specified, or any other plain text pertaining to where a passenger should go to for Check-In.

E989 PRODUCT IDENTIFICATION DETAILS

C

7135 Product Identification M an..35 Onward Flight – Flight Number 7037 Characteristic Identification C an..17 Date Variation. Only used when Onward Flight is being

specified. See SSIM Chapter 2 Date Variation for code set. 7139 Product Identification Characteristic C an..3 Operational Suffix — single alpha character. 7009 Item Description Identification * SG4 END

Page 92: Ssim Impguide 03 1 Oct03

EDIFACT Implementation Guide – Scheduling Messages

ISSUE DATE: OCTOBER 2003 84

Segment ID and Name Data Element Tag and Name Data Format

Codes Status IATA Explanatory Notes SG5 START CO-999 ODI Origin and Destination Details M 3225 PLACE/LOCATION IDENTIFICATION C an..25 Origin Station.. See IATA Airline Coding Directory. IATA 3 letter

city/airport code. 3225 PLACE/LOCATION IDENTIFICATION C an..25 Destination Station. See IATA Airline Coding Directory. IATA 3

letter city/airport code. EQP Equipment information C0-1 E220 MODE OF TRANSPORT M 8067 Mode of Transport, coded M an..3 Service Type code. See SSIM Appendix C for code set 8066 Mode of Transport * E360 EQUIPMENT IDENTIFICATION M 8179 Type of means of transport identification M an..8 Aircraft Type. See SSIM Appendix A for code set 7139 Product Identification Characteristic C an..3 Aircraft Type Operational Suffix, may be an airline internal aircraft

code. 8212 Identification of the means of transport C an..17 Aircraft Registration. XXXXX may be used to

state that the aircraft registration is not known. 8260 Equipment Identification Number C an..17 Aircraft Type Publication Override. E988 COMPANY IDENTIFICATION C 3036 Party name M an..35 Airline Designator of the Aircraft Owner. See IATA Airline Coding

Directory for code set. If more than three characters are used then it is assumed that the full company name is being specified. Use this Data Element only if it differs from the Airline Designator used in the TRA Segment of the Message. In SSIM implementation of this Data Element is Conditional.

3036 Party name C an..35 Airline Designator of the Cockpit Crew Employer. See IATA Airline Coding Directory for code set. If more than three characters are used then it is assumed that the full company name is being specified. Use this Data Element only if the default does not apply, which is that the cockpit crew is employed by the Aircraft Owner.

3036 Party name C an..35 Airline Designator of the Cabin Crew Employer. See IATA Airline Coding Directory for code set. If more than three characters are used then it is assumed that the full company name is being specified. Use this Data Element only if the default does not apply, which is that the cabin crew is employed by the Aircraft Owner.

PDT Product Information C0-9 7133 PRODUCT DETAILS QUALIFIER C an..3 1 Reservations classes (Passenger Reservations Booking Designator –

PRBD) 2 Physical configuration (Aircraft Configuration/Version – ACV) 3 Blocked Seats and/or Unit Load Devices CN Class Nesting CS Physical configuration modified by convertible seats MCD Physical configuration modified by movable class divider E996 PRODUCT DETAILS C26 7037 Characteristic Identification M an..17 Passenger Reservations Booking Designator (PRBD) or Aircraft

Configuration/Version (ACV) specification of Compartment/Class of Service or Cargo Codes. See SSIM Chapter 2 Aircraft Configuration/Version (ACV) table for code set. Single alpha character for PRBD, except when Meal Codes being stated in Data Element 7161 which apply to all classes, when QQQ can be used with the Meal Code(s) being stated only once.

Page 93: Ssim Impguide 03 1 Oct03

Chapter 7 – Transport Service Update (TRAUPD) Message

ISSUE DATE: OCTOBER 2003 85

Segment ID and Name Data Element Tag and Name Data Format

Codes Status IATA Explanatory Notes 4510 Requested information C an..3 Passenger Reservations Booking Designator (PRBD) or Aircraft

Configuration/Version (ACV) specification of number of seats or containers/pallets. In the case of an ACV, the number of seats stated is the total for the Class of Service Code specified in Data Element 7037. Alternatively, a total seat configuration for all Classes of Service may be stated by only using this Data Element in the last repeat of Composite Data Element E996. In the case of a PRBD, the number refers to the class or classes which precede it, i.e. when a series of classes appear without individual numbers then the first subsequent number refers to the total of all those classes since the last number.

7161 Special Services, coded C an..3 Meal Service Note. 1-3 meal types per PRBD/ACV. See SSIM Appendix B Meal Service Note for code set.

7009 Item Description Identification C an..7 Passenger Reservations Booking Modifier (PRBM). In the case of Product Details Qualifier “CN” — related compartment code. Single alpha character

7009 Item Description Identification * 7009 Item Description Identification * CAR Commercial Agreements C0-1 E374 COMPANY ROLE IDENTIFICATION C99 8051 Transport Stage Qualifier M an..3

A Partnership Specification D Duplicate Leg Cross Reference – Duplicate Leg

Identification F Flight Number Override L Code Sharing – Commercial Duplicate O Duplicate Leg Cross Reference – Operational Leg

Identification P Joint Operation Airline Designators (Participating Airlines) R Joint Operation Airline Designators (Reservations control

carrier) S Code Sharing – Shared Airline Designation or Wet Lease

Airline Designation 3036 Party name M an..35 When used with Transport Stage Qualifier codes other than

A — Airline Designator. See IATA Airline Coding Directory for code set. If more than three characters are used then it is assumed that the full company name, or multiple names, is being specified. When used with Transport Stage Qualifier code A – text used specifies a partnership/alliance arrangement.

7135 Product Identification C an..35 Flight Number 7139 Product Identification Characteristic C an..3 Operational Suffix – single alpha character. Note 1: When using to specify Carriers involved in Joint Operations, the Administrating Carrier is taken from the TRA Segment, the Reservations

Control Carrier should be specified as the first instance of E374, followed by other Carriers involved in the Joint Operation by repeat use of E374. If it becomes necessary to ensure correct publication sequence of Joint Operation Carriers, the Administrating Carrier may also be specified in a Composite E374 in the sequence required.

Note 2: Where it is required to disclose an Airline name AND a corporate, or network, name, it is recommended that the form “AIRLINE X DBA ABC EXPRESS ” be used — DBA meaning “doing business as”.

Note 3: In cases where Code Share and Wet Lease conditions exist onthe same flight, and it is required to disclose both Airlines, it is recommended that the form “AIRLINE ABC FOR AIRLINE XYZ ” be used, where AIRLINE ABC is the Airline which has provided the aircraft and crew and is actually operating the flight (the Wet Lease Carrier), and AIRLINE XYZ is the Airline which is the operating carrier in a Code Share arrangement.

Page 94: Ssim Impguide 03 1 Oct03

EDIFACT Implementation Guide – Scheduling Messages

ISSUE DATE: OCTOBER 2003 86

Segment ID and Name Data Element Tag and Name Data Format

Codes Status IATA Explanatory Notes SER Additional Service Information C0-1 E965 PRODUCT FACILITIES, CODED C 9039 Facility type, coded C an..3 In-Flight Service Information or Various

Service Information (e.g. gate, position, etc.). 1 Movie 2 Telephone 3 Telex 4 Audio programming 5 Television 6 Reservation booking service 7 Duty Free sales 8 Smoking 9 Non smoking 10 Short Feature Video 11 No Duty Free sales 12 In-seat power 13 Internet access AHA Aircraft handling agent BBT Baggage belt CCT Check-in counter CON Concourse EXI Passenger exit FHA Freight handling agent GTE Gate PHA Passenger handling agent POS Aircraft position RWY Runway TWY Taxiway 9038 Facility description text C an..70 7133 Product details qualifier C an..3 1 Reservations classes (Passenger Reservations Booking

Designator – PRBD) 2 Physical configuration (Aircraft Configuration/Version –

ACV) 3 Blocked Seats and/or Unit Load Devices 7037 Characteristic identification C26 an..17 Passenger Reservations Booking Designator (PRBD) or

Aircraft Configuration/Version (ACV) compartment, or Class of Service. See SSIM Chapter 2 Aircraft Configuration/Version table for ACV code set. Single alpha character for PRBD

TRF Traffic Restriction Information C0-1 E007 TRAFFIC RESTRICTION INFORMATION C9 8015 Traffic Restriction, coded C an..3 Traffic Restriction Code. Indicates that certain restrictions

apply to the carriage of passengers cargo and/or mail. See SSIM Appendix G for code set.

8017 Traffic Restriction Type, coded C an..3 1 Traffic Restriction Applicable to Passengers Only 2 Traffic Restriction Applicable to Cargo/Mail Only 3 Traffic Restriction Applicable to Cargo Only 4 Traffic Restriction Applicable to Mail Only 8035 Traffic Restriction Type Qualifier, coded C an..3 1 Traffic Restriction Code Qualifier at Board Point 2 Traffic Restriction Code Qualifier at Off Point 3 Traffic Restriction Code Qualifier at Board and Off Points 4440 Free text C an..70 Traffic Restriction Text Information

Page 95: Ssim Impguide 03 1 Oct03

Chapter 7 – Transport Service Update (TRAUPD) Message

ISSUE DATE: OCTOBER 2003 87

Segment ID and Name Data Element Tag and Name Data Format

Codes Status IATA Explanatory Notes DAT Date and Time Information C0-99 E688 DATE AND TIME DETAILS C99 Repetitions are only allowed when the Date data elements

are used. 2005 Date/Time/Period Qualifer M an..3 Used to qualify the nature of the date or time information

which follows in Time Status of Movement in a TRAUPD message.

ACL Actual time in local ACT Actual time ENL End time, in local ENT End time ESL Estimated time, in local EST Estimated time ISK Informative schedule time ISL Informative schedule time, in local NIL Next Info time, in local NIT Next Info time STT Start time STL Start time, in local 9916 First Date C an..35 Date of Movement in a TRAUPD message. May be omitted

if equal to the date stated in the PER segment. 9918 First Time C n..4 Time of Movement in a TRAUPD message, where use of

this data element is mandatory. 2005 Date/Time/Period Qualifier C an..3 Correction Status of Movement in a TRAUPD message. COR Corrected COT Confirmed time HOL Holding time PRE Preannounced time REM Removed REV Revised 9918 First Time C n..4 Creation Time of movement message. 8335 Movement Type, coded C an..3 Movement Identifier or Diversion Identifier or Activity

Identifier in a TRAUPD message. BD Boarding CK Check in DIV Diversion GMV Ground Movement OFB Off Blocks OFS Off stand ONB On Blocks ONS On stand RCL Reclearance information RFA Return from airborne RST Return to stand TDN Touch down TDP 10 minutes before departure TEN 10 minutes out THM 30 Minutes out TKO Take Off 3225 Place/Location Identification C an..25 Re-clearance Point or Station of (intended) diversion. See

IATA Airline Coding Directory. IATA 3 letter city/airport code.

Page 96: Ssim Impguide 03 1 Oct03

EDIFACT Implementation Guide – Scheduling Messages

ISSUE DATE: OCTOBER 2003 88

Segment ID and Name Data Element Tag and Name Data Format

Codes Status IATA Explanatory Notes SPI Specific data information C0-999 E658 DATA TYPE INFORMATION M 9989 Data type, coded M an..3 Type of data within this SPI.

May be to identify: Delay/diversion reasons or Passenger related items like bags, wheel chairs, etc. or Subsets of Passengers — If subfield is left empty TOT (total number of pax) is assumed, this means all pax are counted irrespective whether they board at or before the first station stated in the preceeding ODI and irrespective whether they disembark at or after the second station stated in the preceeding ODI. When passengers travelling from the first Station to the second Station of the ODI segment shall be stated, the code OD has to be used here.

ANI Animals BAG Bags CHD Child passenger CSH Passenger of code share partner DEL Delay (departure) reason DIV Diversion reason FEM Female passenger INF Infants JMP Jump Seats MAL Male passenger OCC Other occupants OD Origin — Destination OWN Passenger of operating carrier PAD Passenger available for disembarkment PET Pets in cabin STR Stretchers TOT Total UM Unaccompanied minors WC Wheelchairs 9011 Status event, coded C an..3 Passenger Status. If subfield is left empty BD (boarded

passengers) is assumed. ALL Allocated AVA Available BD Boarded CK Checked in DB Deboarded DIS Disembarking DN Denied boarding EMB Embarking EST Estimated / Forecasted EXS Extra Seats MAX Maximum MIN Minimum NC Not checked in OF Offloaded OK Confirmed Booking SA Space Available SB Standby

Page 97: Ssim Impguide 03 1 Oct03

Chapter 7 – Transport Service Update (TRAUPD) Message

ISSUE DATE: OCTOBER 2003 89

Segment ID and Name Data Element Tag and Name Data Format

Codes Status IATA Explanatory Notes SPS Space Protected Seats TFB Transfer Booked TFC Transfer Checked in TRS Transit WL Waitlist Booking E658 DATA INFORMATION

(1st occurrence) C

9988 Data Indicator C an..3 1st occurrence. QQQ as a default which may be omitted when quantities are notrelated to delay reason codes or class codes or Numerical Diversion reason code (when data type is DIV). See IATA Airport Handling Manual for code set. or Airline Designator (when status event is TFB or TFC). See IATA Airline Coding Directory for code set.

6060 Quantity C n..15 1st occurrence. Delay time when not related to a delay reason in HHMM format or Number of passengers when not related to classes or Number of items when not related to classes or Flight number (when status event is TFB or TFC).

6411 Measure unit qualifier C an..3 1st occurence For class related purposes indicates whether data refer to reservation or physical classes. Physical classes (code ACV) are assumed as default.

ACV Physical configuration (ACV) PRB Data related to Reservations classes (PRBD) E658 DATA INFORMATION

(2nd and subsequent occurrences) C98

9988 Data indicator C an..3 2nd and subsequent occurrence. Numerical Delay reason code. See IATA Airport Handling Manual for code set or PRBD/ACV specification of compartment. See SSIM Chapter 2 Aircraft Configuration/Version (ACV) table for code set.

6060 Quantity C n..15 2nd and subsequent occurrence. Delay time in HHMM format or Number of passengers.

6411 Measure unit qualifier * STX Status Details C0-1 E656 STATUS DETAILS M 1245 Status indicator, coded C an..3 CKG Check-in restricted to gate VDT DIV Flight / Leg diverted. EEE EMERGENCY Lock HE Hold exists on this flight N Not authorized to load NON Check-in mode NON NTA Transfer check-in not allowed to airline this city or from

this airlines flights departing at this city NTF Transfer check-in not allowed to flight this city or from

this flight departing at this city PA Free seating PB Name check-in PD Numeric check-in PGM Passenger gender mandatory

Page 98: Ssim Impguide 03 1 Oct03

EDIFACT Implementation Guide – Scheduling Messages

ISSUE DATE: OCTOBER 2003 90

Segment ID and Name Data Element Tag and Name Data Format

Codes Status IATA Explanatory Notes PNM Check-in mode PNM RRT Flight rerouted SA Flight open for check-in SB Flight temporarily closed SC Flight closed for check-in SD Flight closed for finalizing (flight initial close) SE Flight held SEI All flights into this city held SEO All flights out of this city held SER Reject when flight held SES Standby when flight held SK Flight open for through check-in SL Flight boarding SM Flight deboarding SN Flight closed for through check-in SO Flight cancelled TL Technical Landing 1229 Action request/notification, coded * 9015 Status type, coded * 4440 Free text * E656 STATUS DETAILS C98 1245 Status indicator, coded C an..3 CKG Check-in restricted to gate VDT DIV Flight / Leg diverted. EEE EMERGENCY Lock HE Hold exists on this flight N Not authorized to load NON Check-in mode NON NTA Transfer check-in not allowed to airline this city or from

this airlines flights departing at this city NTF Transfer check-in not allowed to flight this city or from

this flight departing at this city PA Free seating PB Name check-in PD Numeric check-in PGM Passenger gender mandatory PNM Check-in mode PNM RRT Flight rerouted SA Flight open for check-in SB Flight temporarily closed SC Flight closed for check-in SD Flight closed for finalizing (flight initial close) SE Flight held SEI All flights into this city held SEO All flights out of this city held SER Reject when flight held SES Standby when flight held SK Flight open for through check-in SL Flight boarding SM Flight deboarding SN Flight closed for through check-in SO Flight cancelled TL Technical Landing 1229 Action request/notification, coded * 9015 Status type, coded * 4440 Free text *

Page 99: Ssim Impguide 03 1 Oct03

Chapter 7 – Transport Service Update (TRAUPD) Message

ISSUE DATE: OCTOBER 2003 91

Segment ID and Name Data Element Tag and Name Data Format

Codes Status IATA Explanatory Notes IFT Interactive Free Text C0-99 E971 FREE TEXT QUALIFICATION C 4451 Text Subject Qualifier M an..3 APT Airport related information CAT Catering information CHG Change Information CKI Check-in IFC Interface information NAM Name OPS Operations information PRD Product Information SAF Safety Information SIM IATA SSIM defined information SPH Special handling STN Statutory notice TRA Transportation information VEH Vehicle related information WAB Weight and balance information ZZZ Mutually defined (Bilateral or Internal information) 4473 Information type identification C an..4 101 Passenger Terminal Segment Override – Arrival (to be used

with text subject qualifier SIM) 102 Passenger Terminal Segment Override – Departure (to be

used with text subject qualifier SIM) AC Aircraft information (to be used with text subject qualifier

OPS) AHS Arrival high security flight (to be used with text subject

qualifier SIM) BD Minimum Connecting Time International/Domestic Status

Override – Domestic at Board Point (to be used with text subject qualifier SIM)

BI Minimum Connecting Time International/Domestic Status Override – International at Board Point (to be used with text subject qualifier SIM)

BN Boarding number (to be used with text subject qualifier CKI)

CCV Check in control VDT (to be used with text subject qualifier CKI)

CFT Calculated flying time (to be used with text subject qualifier OPS)

CTL Operations control unit (to be used with text subject qualifier OPS)

DHS Departure high security flight (be used with text subject qualifier SIM)

EN Not Electronic Ticketing Candidate (to be used with text subject qualifier SIM)

ER Electronic Ticketing Required (to be used with text subject qualifier SIM)

ET Electronic Ticketing Candidate (to be used with text subject qualifier SIM)

MCA Row after movable class divider (to be used with text subject qualifier VEH)

MCB Row before movable class divider (to be used with text subject qualifier VEH)

MCD Movable class divider used (to be used with text subject qualifier VEH)

OD Domestic at Off Point (to be used with text subject qualifier SIM)

OI International at Off Point (to be used with text subject qualifier SIM)

PVD PVD Protective cover VDT (to be used with text subject qualifier CKI)

Page 100: Ssim Impguide 03 1 Oct03

EDIFACT Implementation Guide – Scheduling Messages

ISSUE DATE: OCTOBER 2003 92

Segment ID and Name Data Element Tag and Name Data Format

Codes Status IATA Explanatory Notes RCP Recipient (to be used with text subject qualifier IFC) RMK Remark SFT Scheduled flying time (to be used with text subject qualifier

OPS) SV Check-in supervisory agent id (to be used with text subject

qualifier CKI) TA Traffic area (to be used with text subject qualifier OPS) TRG Trigger (to be used with text subject qualifier IFC) TSG Subject to Government Approval (to be used with text

subject qualifier SIM) WB Accepted Baggage Weight in kg (to be used with text

subject qualifier CKI) WCB Accepted Cabin Weight in kg (to be used with text subject

qualifier CKI) WCL Check-in Weight Limit in kg (to be used with text subject

qualifier WAB) WN Weight Table Number in kg (to be used with text subject

qualifier CKI) WSB Stand-by Baggage Weight in kg (to be used with text

subject qualifier CKI) WT Accepted Weight in kg (to be used with text subject

qualifier CKI) 4405 Status, coded * 3036 Party name * 3453 Language, coded * 4440 FREE TEXT C99 When used with code ZZZ in data element 4451, for

bilateral or internal information, the existing SSIM Data Element Identifiers in the 800 and 900 series may be used. In this case, the 800 or 900 series Data Element Identifier should be separated from the free format text by a slash (/). In case of coded text the involved parties should agree on a common code set.

SG5 END SG3 END SG2 END SG1 END UIT Interactive Message Trailer M 0340 INTERACTIVE MESSAGE REFERENCE NUMBER C an..35 Message Serial Number 0074 NUMBER OF SEGMENTS IN THE MESSAGE C n..10 Count includes UIH and UIT.

Page 101: Ssim Impguide 03 1 Oct03

Chapter 7 – Transport Service Update (TRAUPD) Message

ISSUE DATE: OCTOBER 2003 93

7.5 MESSAGE EXAMPLES Transmission of all available data (single sector flight) UIB+UNOA:4+REF 1234/01++++LH:04+SK:04+010831:1225’ UIH+TRAUPD:00:1::IA+1++1:F’ MSD+1:57’ Modification of data ORG+LH:QLH+:TANGO+FRA’ Originator information HDR+K+U+REF1234’ Header information IFT++ANY TEXT’ Free text TRA+LH+400’ Flight Designator PER+U:31AUG01’ Date SDT+SKD’ Start of schedule data block PRT+FRA++0800++1’ Departure Times/Terminals PRT+JFK+1615++1’ Arrival Times/Terminals OPS++5+LH+401’ Onward flight ODI+FRA+JFK’ EQP+J+742::DABZE’ Equipment PDT+1+F+A+C+D+Z+H+B+L+G+Y+K+T+W+E’ PRBD PDT+2+F:8+C:50+M:326’ ACV CAR+D:UA:3517’ Joint Operation SER+9’ Non-Smoking Flight SDT+CUR’ Start of current data block ODI’ Flight related information IFT+OPS:AC+DLK’ Data Link Aircraft ODI+FRA’ Departure related information DAT+NIT::0830::0750:OFB’ Next Info Time SPI+TOT:CK+::PRB+F:3+A:4+C:44+Z:3+B:111+G:142+Y:54+K:3’ Accepted Passengers SPI+PAD:CK+::PRB+Z:3+Y:4+K:3’ Accepted PADs SPI+:AVA++F:1+C:3+M:16’ Available seats SPI+INF+:1’ Number of infants SPI+BAG+:588’ Number of bags SPI+WC+:6’ Number of wheel chairs SPI+UM+:2’ Number of UMs STX+PB+SC’ Status information IFT+CKI:WN+12’ Weight Table Number IFT+CKI:VDT+1527’ Check in VDT ODI++JFK’ Arrival related information STX+HE’ Status information ODI+FRA+JFK’ Segment related information SPI+OD:BKD++F:6+C:56+M:343’ Booked passengers UIT+1+36’ UIZ+REF 123/449+1’

Page 102: Ssim Impguide 03 1 Oct03

EDIFACT Implementation Guide – Scheduling Messages

ISSUE DATE: OCTOBER 2003 94

Transmission of all available data (multi sector flight) UIB+UNOA:4+REF 1234/01++++LH:04+SK:04+010831:1225’ UIH+1+TRAUPD:00:1::IA’ MSD+1:57’ Modification ORG+LH:FRA’ HDR+K+U’ IFT+IFC:TRG+Y’ Trigger of last modification TRA+LH+7643’ Flight PER+U:21JUL99+3’ Date SDT+SKD’ Start of schedule data block PRT+CDG++1000’ Departure PRT+CGN+1800+1830’ Arrival & Departure PRT+FRA+2155’ Arrival ODI+CDG+CGN’ EQP+V+RFS::GEORG+YY’ Equipment PDT+2+PP:4’ ACV ODI+CGN+FRA’ EQP+V+RFS::GEORG+YY’ PDT+2+PP:4’ SDT+CUR’ Start of current data block ODI+CDG’ Departure DAT+ACT:21JUL99:1000:::OFB’ Off block time DAT+ACT:21JUL99:1000:::TKO’ Take off time DAT+ISK::1000:PRE::OFB’ Informative Schedule DAT+ISK::1000:PRE::TKO’ IFT+OPS:TA+6’ Traffic area IFT+OPS:SFT+0745’ Scheduled flying time IFT+IFC:RCP+F+C’ Recipients ODI++CGN’ Arrival DAT+EST:21JUL99:1900:::ONB’ Estimated on block time DAT+ACT:21JUL99:1900:::TDN’ Touch down time DAT+ACT:21JUL99:1900:::ONB’ On block time DAT+ISK::1900:PRE::TDN’ DAT+ISK::1900:PRE::ONB’ ODI+CGN’ Departure DAT+ACT:21JUL99:2000:::OFB’ DAT+ACT:21JUL99:2000:::TKO’ SPI+DEL++32:130’ Delay IFT+OPS:TA+6’ IFT+OPS:SFT+0310’ IFT+IFC:RCP+F+C’ ODI++FRA’ Arrival SER+GTE:222+POS:111’ Gate/Position DAT+EST:21JUL99:2330:::ONB’ UIT+1+43’ UIZ+REF 123/449+1’

Page 103: Ssim Impguide 03 1 Oct03

Chapter 7 – Transport Service Update (TRAUPD) Message

ISSUE DATE: OCTOBER 2003 95

Check-In Data UIB+UNOA:4+REF 123/449++++AY:04+BA:04+010901:1225’ UIH+TRAUPD:00:1::IA+1++1:F’ MSD+1:57’ Modification of data ORG+AY:HEL’ Originator information HDR+K+L+REF1234++CKIDATA’ Header information IFT++ANY TEXT’ Free text TRA+AY+2321’ Flight Designator PER+L:31AUG01’ Date SDT+CUR’ Start of current data block ODI+HEL’ Departure related information SER+CCT:12’ Check in counter SPI+TOT:CK++F:7+C:124+M:153’ Accepted passengers SPI+PAD:CK+::PRB+Z:3+Y:4+K:3’ Accepted PADs SPI+:AVA++F:1+C:3+M:0’ Available seats SPI+INF+:1’ Number of infants SPI+BAG+:288’ Number of bags SPI+WC+:1’ Number of wheel chairs SPI+UM+:2’ Number of UMs STX+PB+SC’ Status information IFT+CKI:WN+12’ Weight Table Number IFT+CKI:RMK+ATT Š PLS OFFER VDB, DETAILS AT GATE’ Flight Remark UIT+1+20’ UIZ+REF 123/449+1’ Reservation Data UIB+UNOA:4+REF 123/449++++KL:04+MN:04+000901:1225’ UIH+TRAUPD:00:1::IA+1++1:F’ MSD+1:57’ Modification of data ORG+KL:AMS’ Originator information HDR+K+L+REF1234++RESDATA’ Header information IFT++ANY TEXT’ Free text TRA+KL+005’ Flight Designator with ops suffix PER+L:10SEP00’ Date SDT+CUR’ Start of current data block ODI+AMS+CPH’ Segment related information PDT+MCD+C:45+Y:56’ Version using movable class divider SPI+TOT:OK++C:46+Y:59’ Booked Pax SPI+PAD:SA++C:0+Y:1’ Listed PADs SPI+TOT:WL++C:4+Y:0’ Waitlisted Pax ………repeat for more segments (ODI) ………repeat for more periods (PER) ………repeat for more flights/carriers (TRA) UIT+1+999’ UIZ+REF 123/449+1’

Page 104: Ssim Impguide 03 1 Oct03

EDIFACT Implementation Guide – Scheduling Messages

ISSUE DATE: OCTOBER 2003 96

Movement Data UIB+UNOA:4+REF1234/98++++RG:04+UA:04+011026:1625’ UIH+TRAUPD:00:1::IA+1++1:F’ MSD+1:82’ Movement ORG+RG:GIG’ Originator information HDR+K+U+REF1234/01’ Header information IFT++ANY TEXT’ Free text TRA+RG+789’ Flight Designator PER+L:25OCT01’ Date SDT+CUR’ Start of current data block ODI+GIG’ Departure related information EQP+J+744::PPXYZ’ Registration DAT+ACT:26OCT01:0012:::OFB’ Off Blocks DAT+ACT:26OCT01:0019:::TKO’ Take Off SPI+DEL++61:17’ Delay SPI+TOT:BD++F:7+C:34+Y:215’ Boarded Pax ODI++MIA’ Arrival related information DAT+EST:26OCT01:0917:::ONB’ Estimated arrival UIT+1+17’ UIZ+REF1234/01+1’

Page 105: Ssim Impguide 03 1 Oct03

97

CHAPTER 8 –TIME ZONE UPDATE (TIZUPD) MESSAGE

8.1 MESSAGE FUNCTION

Purpose: To transmit UTC (Universal Time Coordinated) Standard and Daylight Saving Time – Local Time variations for countries and time zones.

8.2 RULES FOR MESSAGE CONSTRUCTION UIH M1 Message Header MSD M1 Message Action Details ORG M1 Originator of Request Details IFT C0-1 Free Text Group 1 C0-9999 ODI M1 Origin and Destination Details DAT C0-9 Date and Time Information IFT C0-1 Free Text UIT M1 Message Trailer

8.3 MESSAGE BRANCHING DIAGRAM

Level 0

Level 1

Level 2

UIHM1

MSDM1

ORGM1

UITM1

Gr.1C9999

ODIM1

DATC9

TIZUPD - Time Zone Update

IFTC1

IFTC1

Page 106: Ssim Impguide 03 1 Oct03

EDIFACT Implementation Guide – Scheduling Messages

ISSUE DATE: OCTOBER 2003 98

8.4 EDIFACT SEGMENTS

Segment ID and Name Data Element Tag and Name Data Format

Codes Status IATA Explanatory Notes UIH INTERACTIVE MESSAGE HEADER M S306 INTERACTIVE MESSAGE IDENTIFIER M 0065 Message type M an..6 TIZUPD 0052 Message version number M an..3 00 0054 Message release number M an..3 2 0113 Message type sub-function identification * 0051 Controlling agency, coded C an..3 IA 0057 Association assigned code * 0340 INTERACTIVE MESSAGE REFERENCE NUMBER C an..35 Message Serial Number S302 DIALOGUE REFERENCE * 0300 Initiator control reference M an..35 0303 Initiator reference identification C an..35 0051 Controlling agency, coded C an..3 0304 Message subset release number C an..35 S301 STATUS OF THE TRANSFER — INTERACTIVE C 0320 Sender sequence number C n..6 Starts at 1 and is incremented by 1 for each transfer 1 0323 Transfer position, coded C a1 Continuation/End Code. C Conitinuation Code F End Code 0325 Duplicate indicator C a1 Set = D if the interchange is a duplicate, otherwise not used. S300 DATE AND/OR TIME OF INITIATION * 0338 Event date C n..8 0314 Event time C an..15 0336 Time offset C n4 0035 TEST INDICATOR C n1 Set =1 if the interchange is a test. MSD MESSAGE ACTION DETAILS M E972 MESSAGE PROCESSING DETAILS C 4025 Business function, coded C an..3 1 Air 1225 Message function, coded C an..3 57 Modification. Update of UTC local time variations 3055 Code list responsible agency, coded * an..3 * or set to “3’’ 1225 Message function, coded * 4343 RESPONSE TYPE, CODED * 4343 RESPONSE TYPE, CODED *

Page 107: Ssim Impguide 03 1 Oct03

Chapter 8 – Time Zone Update (TIZUPD) Message

ISSUE DATE: OCTOBER 2003 99

Segment ID and Name Data Element Tag and Name Data Format

Codes Status IATA Explanatory Notes ORG Originator of Request Details M E973 DELIVERING SYSTEM DETAILS C To specify the system and its location that originates or

delivers the message for a third party. 3036 Party name C an..35 Airline Designator. See IATA Airline Coding Directory for

code set. If more than three characters are used then it is assumed that the full company name is being specified. The full company name should be used when a duplicate IATA designator is in use for the specified company.

3225 Place/Location identification C an..25 See IATA Airline Coding Directory. IATA 3 letter city/airport code

3224 Place/Location name C an..70 Used only when a code does not exist E974 ORIGINATOR IDENTIFICATION DETAILS * 3197 Agent identification C an..9 3465 In-house identification C an..9 3197 Agent identification C an..9 3036 Party name C an..35 E975 LOCATION C 3225 Place/Location identification C an..25 See IATA Airline Coding Directory. IATA 3 letter

city/airport code 3224 Place/Location name C an..70 Used only when a code does not exist 3036 PARTY NAME * 3457 ORIGINATOR TYPE CODED * E976 ORIGINATOR DETAILS * 3207 Country, coded C an..3 6345 Currency, coded C an..3 3453 Language, coded C an..3 3503 ORIGINATORS AUTHORITY IDENTIFICATION * IFT Interactive Free Text C0-1 E971 FREE TEXT QUALIFICATION C 4451 Text Subject Qualifier M an..3 NAM Name 4473 Information type identification * 4405 Status, coded * 3036 Party name * 3453 Language, coded * 4440 FREE TEXT C99 SG1 START C0-9999 ODI Origin and Destination Details M 3225 PLACE/LOCATION IDENTIFICATION C an..25 Origin Station. See IATA Airline Coding Directory. IATA

3 letter city/airport code. 3225 PLACE/LOCATION IDENTIFICATION C an..25 Destination Station. See IATA Airline Coding Directory

for. IATA 3 letter city/airport code.

Page 108: Ssim Impguide 03 1 Oct03

EDIFACT Implementation Guide – Scheduling Messages

ISSUE DATE: OCTOBER 2003 100

Segment ID and Name Data Element Tag and Name Data Format

Codes Status IATA Explanatory Notes DAT Date and Time Information C0-9 E688 DATE AND TIME DETAILS C99 Repetitions are only allowed when the Date data elements

are used. 2005 Date/Time/Period Qualifer M an..3 Used to qualify the nature of the date or time information

which follows in a TIZUPD message. DV Daylight Saving Time (DST) Variation ENT End time STT Start time SV Standard Time Variation 9916 First Date C an..35 Validity Start or End Date for a Standard or Daylight

Saving Time Variation in a TIZUPD message 9918 First Time C n..4 Standard or Daylight Saving Time Variation in a TIZUPD

message; variation is assumed to be positive; if negative, use minus sign (–) before the four numerics

2005 Date/Time/Period Qualifier * 9918 First Time * n..4 8335 Movement Type, coded * 3225 Place/Location Identification * an..25 IFT Interactive Free Text C0-1 E971 FREE TEXT QUALIFICATION C 4451 Text Subject Qualifier M an..3 NAM Name 4473 Information type identification * 4405 Status, coded * 3036 Party name * 3453 Language, coded * 4440 FREE TEXT C99 SG1 END UIT Interactive Message Trailer M 0340 INTERACTIVE MESSAGE REFERENCE NUMBER C an..35 Message Serial Number 0074 NUMBER OF SEGMENTS IN THE MESSAGE C n..10 Count includes UIH and UIT.

Page 109: Ssim Impguide 03 1 Oct03

Chapter 8 – Time Zone Update (TIZUPD) Message

ISSUE DATE: OCTOBER 2003 101

8.5 MESSAGE EXAMPLES

UIB+UNOA:4+REF 1234/01++++++000525:1225’ UIH+TIZUPD:00:1::IA+1++1:F’ MSD+1:57’ Modification of data ORG+CP:YYC’ Originator information IFT++ANY TEXT’ Free text ODI+CA1’ Time zone DAT+SV::-0330’ Standard UTC — LT variation DAT+DV::-0230+STT:04APR99:0530+ENT:31OCT99:0430’ DAT+DV::-0230+STT:02APR00:0530+ENT:29OCT00:0430’ DAT+DV::-0230+STT:01APR01:0530+ENT:28OCT01:0430’ Daylight saving time periods IFT+NAM+CANADA NEWFOUNDLAND’ Free text ODI+EE’ Time zone DAT+SV::0100+ENT:31OCT99:0100’ Standard UTC – LT variation DAT+SV::0200+STT:31OCT99:0100’ Standard UTC – LT variation ……..repeat for more time zones (ODI) UIT+1+11’ UIZ+REF 123/449+1’

Page 110: Ssim Impguide 03 1 Oct03

EDIFACT Implementation Guide – Scheduling Messages

ISSUE DATE: OCTOBER 2003 102

Intentionally left blank

Page 111: Ssim Impguide 03 1 Oct03

103

APPENDIX A – SEGMENT DIRECTORY

Legend for Segment Directory + Signifies addition of a segment or segment component. * Signifies change to a segment or segment component.

Tag Name Status Repetitions Format

ACT ACTION IDENTIFICATION Function: To provide action required information

1229 ACTION REQUEST/NOTIFICATION, CODED M 1 an..3 E988 COMPANY IDENTIFICATION C 1 3036 Party name M 1 an..35 3036 Party name C 2 an..35 E989 PRODUCT IDENTIFICATION DETAILS C 1 7135 Product Identification M 1 an..35 7037 Characteristic Identification C 1 an..17 7139 Product Identification Characteristic C 1 an..3 7009 Item Description Identification C 3 an..7 E988 COMPANY IDENTIFICATION C 1 3036 Party name M 1 an..35 3036 Party name C 2 an..35 E989 PRODUCT IDENTIFICATION DETAILS C 1 7135 Product Identification M 1 an..35 7037 Characteristic Identification C 1 an..17 7139 Product Identification Characteristic C 1 an..3 7009 Item Description Identification C 3 an..7 E369 REASON INFORMATION C 1 9013 Status reason, coded M 1 an..3 9013 Status reason, coded C 8 an..3 CAR COMMERCIAL AGREEMENTS Function: To specify Commercial Agreements between two or more companies related to joint, shared, lease operations, etc.

E374 COMPANY ROLE IDENTIFICATION C 99 8051 Transport Stage Qualifier M 1 an..3 3036 Party name M 1 an..35 7135 Product Identification C 1 an..35 7139 Product Identification Characteristic C 1 an..3

Page 112: Ssim Impguide 03 1 Oct03

EDIFACT Implementation Guide – Scheduling Messages

ISSUE DATE: OCTOBER 2003 104

Tag Name Status Repetitions Format

CNX CONNECTION DETAILS Function: To specify connection city and airline designator.

E312 CONNECTION DETAILS M 1 3225 Place/Location identification C 1 an..25 9906 Company Identification C 1 an..35 9918 First Time C 1 n..4 9922 Second Time C 1 n..4 E312 CONNECTION DETAILS C 1 3225 Place/Location identification C 1 an..25 9906 Company Identification C 1 an..35 9918 First Time C 1 n..4 9922 Second Time C 1 n..4 DAT DATE AND TIME INFORMATION Function: To provide date and time details relative to movements of a vehicle or date and time details relative to ground activities or to provide date and time details for changes to Standard and Daylight Saving Time Variation.

E688 DATE AND TIME DETAILS C 99 2005 Date/Time/Period qualifier M 1 an..3 9916 First Date C 1 an..35 9918 First Time C 1 n..4 2005 Date/Time/Period qualifier C 1 an..3 9918 First Time C 1 n..4 8335 Movement Type, coded C 1 an..3 3225 Place/Location identification C 1 an..25 EQP EQUIPMENT INFORMATION Function: To specify information relating to the vehicle type.

E220 MODE OF TRANSPORT C 1 8067 Mode of Transport, coded M 1 an..3 8066 Mode of Transport C 1 an..17 E360 EQUIPMENT IDENTIFICATION C 1 8179 Type of means of transport identification M 1 an..8 7139 Product Identification Characteristic C 1 an..3 8212 Identification of the means of transport C 1 an..17 8260 Equipment Identification Number C 1 an..17 E988 COMPANY IDENTIFICATION C 1 3036 Party name M 1 an..35 3036 Party name C 2 an..35

Page 113: Ssim Impguide 03 1 Oct03

Appendix A – Segment Directory

ISSUE DATE: OCTOBER 2003 105

Tag Name Status Repetitions Format

EQS EQUIPMENT/SERVICE INFORMATION Function: To provide equipment and service information

E359 EQUIPMENT INFORMATION C 2 8067 Mode of Transport, coded M 1 an..3 8179 Type of means of transport identification M 1 an..8 4510 Requested information M 1 an..3 9984 Type of Call at Port C 1 n..3 E523 NUMBER OF UNIT DETAILS C 2 6350 Number of Units M 1 n..15 6353 Number of Units, qualifier M 1 an..3 ERI APPLICATION ERROR INFORMATION Function: To identify the type of application error within a message

E901 APPLICATION ERROR DETAIL M 1 9321 Application error, coded M 1 an..8 1131 Code list qualifier C 1 an..3 3055 Code list responsible agency, coded C 1 an..3 HDR HEADER INFORMATION Function: To specify header information applicable to the entire message

4405 STATUS, CODED M 1 an..3 E507 DATE/TIME/PERIOD M 1 2005 Date/Time/Period qualifier M 1 an..3 2380 Date/time/period C 1 an..35 2379 Date/time/period format qualifier C 1 an..3 1154 REFERENCE NUMBER C 1 an..35 2380 DATE/TIME/PERIOD C 1 an..35 4440 FREE TEXT C 1 an..70 7135 PRODUCT IDENTIFICATION C 2 an..35 IFT INTERACTIVE FREE TEXT Function: To provide free form or coded text information

E971 FREE TEXT QUALIFICATION C 1 4451 Text Subject Qualifier M 1 an..3 4473 Information type identification C 1 an..4 4405 Status, coded C 1 an..3 3036 Party name C 1 an..35 3453 Language, coded C 1 an..3 4440 FREE TEXT C 99 an..70

Page 114: Ssim Impguide 03 1 Oct03

EDIFACT Implementation Guide – Scheduling Messages

ISSUE DATE: OCTOBER 2003 106

Tag Name Status Repetitions Format

IMD ITEM DESCRIPTION Function: To describe an item in either an industry or free format.

7077 ITEM DESCRIPTION TYPE, CODED C 1 an..3 7081 ITEM CHARACTERISTIC, CODED C 1 an..3 E273 ITEM DESCRIPTION C 1 7009 Item Description Identification C 1 an..7 1131 Code list qualifier C 1 an..3 3055 Code list responsible agency, coded C 1 an..3 7008 Item Description C 1 an..35 7008 Item Description C 1 an..35 3453 Language, coded C 1 an..3 7383 SURFACE/LAYER INDICATOR, CODED C 1 an..3 LCI LOCATION INFORMATION Function: To specify location information.

E329 LOCATION COUNTRY IDENTIFICATION M 1 3207 Country, coded M 1 an..3 3229 Country Sub-entity Identification C 1 an..9 3224 PLACE/LOCATION C 1 an..70 MSD MESSAGE ACTION DETAILS Function: To specify the message processing requirements

E972 MESSAGE PROCESSING DETAILS C 1 4025 Business function, coded C 1 an..3 1225 Message function, coded C 1 an..3 3055 Code list responsible agency, coded C 1 an..3 1225 Message function, coded C 9 an..3 4343 RESPONSE TYPE, CODED C 5 an..3 ODI ORIGIN AND DESTINATION DETAILS Function: To identify the origin and destination of a journey

3225 PLACE/LOCATION IDENTIFICATION C 2 an..25

Page 115: Ssim Impguide 03 1 Oct03

Appendix A – Segment Directory

ISSUE DATE: OCTOBER 2003 107

Tag Name Status Repetitions Format

OPS PORT OF CALL INFORMATION Function: To provide additional information relating to the port of call used by a service

E368 ON-TIME PERFORMANCE C 1 2380 Date/time/period M 1 an..35 5482 Percentage C 1 n..8 5245 Percentage qualifier C 1 an..3 E370 PORT OF CALL DETAILS C 1 9984 Type of Call at Port C 1 n..3 9982 Restricted Payload C 1 an..17 E988 COMPANY IDENTIFICATION C 1 3036 Party name M 1 an..35 3036 Party name C 2 an..35 E989 PRODUCT IDENTIFICATION DETAILS C 1 7135 Product Identification M 1 an..35 7037 Characteristic Identification C 1 an..17 7139 Product Identification Characteristic C 1 an..3 7009 Item Description Identification C 3 an..7 ORG ORIGINATOR OF REQUEST DETAILS Function: To specify details related to the originator of the schedule update

E973 SYSTEM DETAILS C 1 3036 Party name C 1 an..35 3225 Place/Location identification C 1 an..25 3224 Place/Location C 1 an..70 E974 ORIGINATOR IDENTIFICATION DETAILS C 1 3197 Agent identification C 1 an..9 3465 In-house identification C 1 an..9 3197 Agent identification C 1 an..9 3036 Party name C 1 an..35 E975 LOCATION C 1 3225 Place/Location identification C 1 an..25 3224 Place/Location C 1 an..70 3036 PARTY NAME C 1 an..35 3457 ORIGINATOR TYPE CODED C 1 an..3 E976 ORIGINATOR DETAILS C 1 3207 Country, coded C 1 an..3 6345 Currency, coded C 1 an..3 3453 Language, coded C 1 an..3 3503 ORIGINATORS AUTHORITY IDENTIFICATION C 1 an..9

Page 116: Ssim Impguide 03 1 Oct03

EDIFACT Implementation Guide – Scheduling Messages

ISSUE DATE: OCTOBER 2003 108

Tag Name Status Repetitions Format

PDT PRODUCT INFORMATION Function: To specify information relating to the physical configuration and/or Passenger Reservations classes, meals etc.

7133 PRODUCT DETAILS QUALIFIER C 1 an..3 E996 PRODUCT DETAILS C 26 7037 Characteristic Identification M 1 an..17 4510 Requested information C 1 an..3 7161 Special Services, coded C 1 an..3 7009 Item Description Identification C 3 an..7 PER DATE/TIME/PERIOD Function: To specify date, time, period, frequency

E507 DATE/TIME/PERIOD M 1 2005 Date/Time/Period qualifier M 1 an..3 2380 Date/time/period C 1 an..35 2379 Date/time/period format qualifier C 1 an..3 6072 FREQUENCY VALUE M 1 n..9 6071 FREQUENCY QUALIFIER C 1 an..3 1245 STATUS INDICATOR, CODED C 1 an..3 PRT TERMINAL/TIME INFORMATION Function: To provide information relating to service times and terminals used by a service

E517 LOCATION IDENTIFICATION C 1 3225 Place/Location identification M 1 an..25 1131 Code list qualifier C 1 an..3 3055 Code list responsible agency, coded C 1 an..3 3224 Place/Location C 1 an..70 E362 TIME INFORMATION C 2 2002 Time Value M 1 n4 2002 Time Value C 1 n4 9986 UTC/Local Time Variation C 1 n4 2148 Date Variation C 1 n1 E992 POSITION C 2 3223 Related place/location one identification C 2 an..25

Page 117: Ssim Impguide 03 1 Oct03

Appendix A – Segment Directory

ISSUE DATE: OCTOBER 2003 109

Tag Name Status Repetitions Format

RTG ROUTING INFORMATION Function: To provide routing information

E316 PRODUCT LOCATION DETAILS M 2 3225 Place/Location identification M 1 an..25 3225 Place/Location identification C 1 an..25 3227 Place/Location qualifier C 1 an..3 E316 PRODUCT LOCATION DETAILS C 97 3225 Place/Location identification M 1 an..25 3225 Place/Location identification C 1 an..25 3227 Place/Location qualifier C 1 an..3 SDT SELECTION DETAILS INFORMATION Function: To specify a selected option and associated information.

E010 SELECTION DETAILS INFORMATION M 1 4009 Option, coded M 1 an..3 4018 Associated option information C 1 an..35 E010 SELECTION DETAILS INFORMATION C 98 4009 Option, coded M 1 an..3 4018 Associated option information C 1 an..35 SER ADDITIONAL SERVICE INFORMATION Function: To provide additional service information

E965 PRODUCT FACILITIES, CODED C 99 9039 Facility type, coded C 1 an..3 9038 Facility description text C 1 an..70 7133 Product Details Qualifier C 1 an..3 7037 Characteristic Identification C 26 an..17 SPI SPECIFIC DATA INFORMATION Function: Tp specify miscellaneous data by first identifying the type of data to be sent and then the current data.

E658 DATA TYPE INFORMATION M 1 9989 Data type, coded M 1 an..3 9011 Status event, coded C 1 an..3 E659 DATA INFORMATION C 99 9988 Data indicator C 1 an..3 6060 Quantity C 1 n..15 6411 Measure unit qualifier C 1 an..3

Page 118: Ssim Impguide 03 1 Oct03

EDIFACT Implementation Guide – Scheduling Messages

ISSUE DATE: OCTOBER 2003 110

Tag Name Status Repetitions Format

STX STATUS DETAILS Function: To identify a status and related information.

E656 STATUS DETAILS M 1 1245 Status Indicator, Coded C 1 an..3 1229 Action Request/Notification, Coded C 1 an..3 9015 Status type, coded C 1 an..3 4440 Free text C 1 an..70 E656 STATUS DETAILS C 98 1245 Status Indicator, Coded C 1 an..3 1229 Action Request/Notification, Coded C 1 an..3 9015 Status type, coded C 1 an..3 4440 Free text C 1 an..70 TRA TRANSPORT IDENTIFIER Function: To specify the transport service(s) which is/are to be updated or cancelled

E988 COMPANY IDENTIFICATION M 1 3036 Party name M 1 an..35 3036 Party name C 2 an..35 E989 PRODUCT IDENTIFICATION DETAILS C 9 7135 Product Identification M 1 an..35 7037 Characteristic Identification C 1 an..17 7139 Product Identification Characteristic C 1 an..3 7009 Item Description Identification C 3 an..7 TRF TRAFFIC RESTRICTION INFORMATION Function: To provide information relating to traffic restrictions

E007 TRAFFIC RESTRICTION INFORMATION C 9 8015 Traffic Restriction, coded C 1 an..3 8017 Traffic Restriction Type, coded C 1 an..3 8035 Traffic Restriction Type Qualifier, coded C 1 an..3 4440 Free text C 1 an..70

Page 119: Ssim Impguide 03 1 Oct03

Appendix A – Segment Directory

ISSUE DATE: OCTOBER 2003 111

Tag Name Status Repetitions Format

UIB INTERACTIVE INTERCHANGE HEADER Function: To head and identify an interchange.

S001 SYNTAX IDENTIFIER M 1 0001 Syntax identifier M 1 a4 0002 Syntax version number M 1 an1 0080 Service code list directory version number C 1 an..6 0133 Character encoding, coded C 1 an..3 S302 DIALOGUE REFERENCE C 1 0300 Initiator control reference M 1 an..35 0303 Initiator reference identification C 1 an..35 0051 Controlling agency, coded C 1 an..3 0304 Responder control reference C 1 an..35 S303 TRANSACTION REFERENCE C 1 0306 Transaction control reference M 1 an..35 0303 Initiator reference identification C 1 an..35 0051 Controlling agency, coded C 1 an..3 S018 SCENARIO IDENTIFICATION C 1 0127 Scenario identification M 1 an..14 0128 Scenario version number C 1 an..3 0130 Scenario release number C 1 an..3 0051 Controlling agency, coded C 1 an..3 S305 DIALOGUE IDENTIFICATION C 1 0311 Dialogue identification M 1 an..14 0342 Dialogue version number C 1 an..3 0344 Dialogue release number C 1 an..3 0051 Controlling agency, coded C 1 an..3 S002 INTERCHANGE SENDER C 1 0004 Interchange sender identification M 1 an..35 0007 Identification code qualifier C 1 an..4 0008 Interchange sender internal identification C 1 an..35 0042 Interchange sender internal sub-identification C 1 an..35 S003 INTERCHANGE RECIPIENT C 1 0010 Interchange recipient Identification M 1 an..35 0007 Identification code qualifier C 1 an..4 0014 Interchange recipient internal identification C 1 an..35 0046 Interchange recipient internal sub-identification C 1 an..35 S300 DATE AND/OR TIME OF INITIATION C 1 0338 Event date C 1 n.8 0314 Event time C 1 an..15 0336 Time offset C 1 n4 0325 DUPLICATE INDICATOR C 1 a1 0035 TEST INDICATOR C 1 n1

Page 120: Ssim Impguide 03 1 Oct03

EDIFACT Implementation Guide – Scheduling Messages

ISSUE DATE: OCTOBER 2003 112

Tag Name Status Repetitions Format

UIH INTERACTIVE MESSAGE HEADER Function: To head, identify and specify a Message

S306 INTERACTIVE MESSAGE IDENTIFIER M 1 0065 Message type M 1 an..6 0052 Message version number M 1 an..3 0054 Message release number M 1 an..3 0113 Message type sub-function identification C 1 an..6 0051 Controlling agency, coded C 1 an..3 0057 Association assigned code C 1 an..6 0340 INTERACTIVE MESSAGE REFERENCE NUMBER C 1 an..35 S302 DIALOGUE REFERENCE C 1 0300 Initiator control reference M 1 an..35 0303 Initiator reference identification C 1 an..35 0051 Controlling agency, coded C 1 an..3 0304 Responder control reference C 1 an..35 S301 STATUS OF THE TRANSFER - INTERACTIVE C 1 0320 Sender sequence number C 1 n..6 0323 Transfer position, coded C 1 a1 0325 Duplicate indicator C 1 a1 S300 DATE AND/OR TIME OF INITIATION C 1 0338 Event date C 1 n.8 0314 Event time C 1 an..15 0336 Time offset C 1 n4 0035 TEST INDICATOR C 1 n1 UIT INTERACTIVE MESSAGE TRAILER Function: To end and check the completeness of a Message

0340 INTERACTIVE MESSAGE REFERENCE NUMBER C 1 an..35 0074 NUMBER OF SEGMENTS IN THE MESSAGE C 1 n..10 UIZ INTERACTIVE INTERCHANGE TRAILER Function: To end and check the completeness of an interchange.

S302 DIALOGUE REFERENCE C 1 0300 Initiator control reference M 1 an..35 0303 Initiator reference identification C 1 an..35 0051 Controlling agency, coded C 1 an..3 0304 Responder control reference C 1 an..35 0036 INTERCHANGE CONTROL COUNT C 1 n..6 0325 DUPLICATE INDICATOR C 1 a1

Page 121: Ssim Impguide 03 1 Oct03

113

APPENDIX B – COMPOSITE DIRECTORY

Legend for Composite Element Directory + Signifies addition of a composite or composite component. * Signifies change to a composite or composite component. # Signifies composite marked for deletion. -UN Following composite tag signifies this composite is UN version. Tag Name Status Repetitions Format E007 TRAFFIC RESTRICTION INFORMATION Function: To convey certain restrictions that appply to a means of transport on all or part of a journey. 8015 Traffic Restriction, coded C 1 an..3 8017 Traffic Restriction Type, coded C 1 an..3 8035 Traffic Restriction Type Qualifier, coded C 1 an..3 4440 Free text C 1 an..70 E010 SELECTION DETAILS INFORMATION Function: To specify the details for making a selection 4009 Option, coded M 1 an..3 4018 Associated option information C 1 an..35 E220 MODE OF TRANSPORT Function: Method of transport code or name. Code preferred. 8067 Mode of Transport, coded M 1 an..3 8066 Mode of Transport C 1 an..17 E273 ITEM DESCRIPTION Function: Description of an item. 7009 Item Description Identification C 1 an..7 1131 Code list qualifier C 1 an..3 3055 Code list responsible agency, coded C 1 an..3 7008 Item Description C 1 an..35 7008 Item Description C 1 an..35 3453 Language, coded C 1 an..3 E312 CONNECTION DETAILS Function: Tospecify the location, product supplier and time for a connection with the next means of transport. 3225 Place/Location identification C 1 an..25 9906 Company Identification C 1 an..35 9918 First Time C 1 n..4 9922 Second Time C 1 n..4 E316 PRODUCT LOCATION DETAILS Function: To indicate a location and the type of location. 3225 Place/Location identification M 1 an..25 3225 Place/Location identification C 1 an..25 3227 Place/Location qualifier C 1 an..3

Page 122: Ssim Impguide 03 1 Oct03

EDIFACT Implementation Guide – Scheduling Messages

ISSUE DATE: OCTOBER 2003 114

Tag Name Status Repetitions Format E329 LOCATION COUNTRY IDENTIFICATION Function: To identify a location by code or name. 3207 Country, coded M 1 an..3 3229 Country Sub-entity Identification C 1 an..9 E359 EQUIPMENT INFORMATION Function: To provide equipment and service information. 8067 Mode of Transport, coded M 1 an..3 8179 Type of means of transport identification M 1 an..8 4510 Requested information M 1 an..3 9984 Type of Call at Port C 1 n..3 E360 EQUIPMENT IDENTIFICATION Function: To indicate the type of vehicle being used. 8179 Type of means of transport identification M 1 an..8 7139 Product Identification Characteristic C 1 an..3 8212 Identification of the means of transport C 1 an..17 8260 Equipment Identification Number C 1 an..17 E362 TIME INFORMATION Function: To indicate time and time variation information. 2002 Time Value M 1 n4 2002 Time Value C 1 n4 9986 UTC/Local Time Variation C 1 n4 2148 Date Variation C 1 n1 E368 ON-TIME PERFORMANCE Function: To provide punctuality performance information. 2380 Date/time/period M 1 an..35 5482 Percentage C 1 n..8 5245 Percentage qualifier C 1 an..3 E369 REASON INFORMATION Function: To provide reason information. 9013 Status reason, coded M 1 an..3 9013 Status reason, coded C 8 an..3 E370 PORT OF CALL DETAILS Function: To provide information related to arrival/departure at a port. 9984 Type of Call at Port C 1 n..3 9982 Restricted Payload C 1 an..17 9417 Government Action, Coded C 1 an..3

Page 123: Ssim Impguide 03 1 Oct03

Appendix B – Composite Directory

ISSUE DATE: OCTOBER 2003 115

Tag Name Status Repetitions Format E374 COMPANY ROLE IDENTIFICATION Function: To indicate commercial agreements related to the service being provided. 8051 Transport Stage Qualifier M 1 an..3 3036 Party name M 1 an..35 7135 Product Identification C 1 an..35 7139 Product Identification Characteristic C 1 an..3 E507 DATE/TIME/PERIOD Function: Date and/or time, or period relevant to the specified date/time/period type. 2005 Date/Time/Period qualifier M 1 an..3 2380 Date/time/period C 1 an..35 2379 Date/time/period format qualifier C 1 an..3 E517 LOCATION IDENTIFICATION Function: Identification of a location by code or name. 3225 Place/Location identification M 1 an..25 1131 Code list qualifier C 1 an..3 3055 Code list responsible agency, coded C 1 an..3 3224 Place/Location C 1 an..70 E523 NUMBER OF UNIT DETAILS Function: Identification of number of units and its purpose. 6350 Number of Units M 1 n..15 6353 Number of Units, qualifier M 1 an..3 E656 STATUS DETAILS Function: To specify a status, the action to be taken, and an additional qualification of the status. 1245 Status Indicator, Coded C 1 an..3 1229 Action Request/Notification, Coded C 1 an..3 9015 Status type, coded C 1 an..3 4440 Free text C 1 an..70 E658 DATA TYPE INFORMATION Function: To identify the type of data to be sent and to qualify the data when required. 9989 Data type, coded M 1 an..3 9011 Status event, coded C 1 an..3 E659 DATA INFORMATION Function: To identify specific data and a quantity related to the data. 9988 Data indicator C 1 an..3 6060 Quantity C 1 n..15 6411 Measure unit qualifier C 1 an..3

Page 124: Ssim Impguide 03 1 Oct03

EDIFACT Implementation Guide – Scheduling Messages

ISSUE DATE: OCTOBER 2003 116

Tag Name Status Repetitions Format E688 DATE AND TIME DETAILS Function: To provide date and time details relative to flight movements. 2005 Date/Time/Period qualifier M 1 an..3 9916 First Date C 1 an..35 9918 First Time C 1 n..4 2005 Date/Time/Period qualifier C 1 an..3 9918 First Time C 1 n..4 8335 Movement Type, coded C 1 an..3 3225 Place/Location identification C 1 an..25 E901 APPLICATION ERROR DETAIL Function: Code assigned by the recipient of a message to indicate a data validation error condition. 9321 Application error, coded M 1 an..8 1131 Code list qualifier C 1 an..3 3055 Code list responsible agency, coded C 1 an..3 E965 PRODUCT FACILITIES, CODED Function: Specification of special travel facilities. 9039 Facility type, coded C 1 an..3 9038 Facility description text C 1 an..70 7133 Product Details Qualifier C 1 an..3 7037 Characteristic Identification C 26 an..17 E971 FREE TEXT QUALIFICATION Function: To specify the type, purpose, status, and language of free text. 4451 Text Subject Qualifier M 1 an..3 4473 Information type identification C 1 an..4 4405 Status, coded C 1 an..3 3036 Party name C 1 an..35 3453 Language, coded C 1 an..3 E972 MESSAGE PROCESSING DETAILS Function: To indicate message processing information. 4025 Business function, coded C 1 an..3 1225 Message function, coded C 1 an..3 3055 Code list responsible agency, coded C 1 an..3 1225 Message function, coded C 9 an..3 E973 SYSTEM DETAILS Function: To specify the system and its location that originates or delivers the message for a third party. 3036 Party name C 1 an..35 3225 Place/Location identification C 1 an..25 3224 Place/Location C 1 an..70

Page 125: Ssim Impguide 03 1 Oct03

Appendix B – Composite Directory

ISSUE DATE: OCTOBER 2003 117

Tag Name Status Repetitions Format E974 ORIGINATOR IDENTIFICATION DETAILS Function: To identify the assigned agent identification code, the originating system identification, booking source and agent name, in that sequence. 3197 Agent identification C 1 an..9 3465 In-house identification C 1 an..9 3197 Agent identification C 1 an..9 3036 Party name C 1 an..35 E975 LOCATION Function: To identify a location. 3225 Place/Location identification C 1 an..25 3224 Place/Location C 1 an..70 E976 ORIGINATOR DETAILS Function: To specify details about the originator. 3207 Country, coded C 1 an..3 6345 Currency, coded C 1 an..3 3453 Language, coded C 1 an..3 E988 COMPANY IDENTIFICATION Function: To identify the company and any associated companies. 3036 Party name M 1 an..35 3036 Party name C 2 an..35 E989 PRODUCT IDENTIFICATION DETAILS Function: Code, number or name to identify a specific product or service and a code to identify the level or type of product or service. 7135 Product Identification M 1 an..35 7037 Characteristic Identification C 1 an..17 7139 Product Identification Characteristic C 1 an..3 7009 Item Description Identification C 3 an..7 E992 POSITION Function: To identify the position of an item. 3223 Related place/location one identification C 2 an..25 E996 PRODUCT DETAILS Function: To specify details for a product class. 7037 Characteristic Identification M 1 an..17 4510 Requested information C 1 an..3 7161 Special Services, coded C 1 an..3 7009 Item Description Identification C 3 an..7

Page 126: Ssim Impguide 03 1 Oct03

EDIFACT Implementation Guide – Scheduling Messages

ISSUE DATE: OCTOBER 2003 118

Tag Name Status Repetitions Format S001 SYNTAX IDENTIFIER Function: Identification of the agency controlling the syntax, the syntax level and version number, and the service code directory. 0001 Syntax identifier M 1 a4 0002 Syntax version number M 1 an1 0080 Service code list directory version number C 1 an..6 0133 Character encoding, coded C 1 an..3 S002 INTERCHANGE SENDER Function: Identification of the sender of the interchange. 0004 Interchange sender identification M 1 an..35 0007 Identification code qualifier C 1 an..4 0008 Interchange sender internal identification C 1 an..35 0042 Interchange sender internal sub-identification C 1 an..35 S003 INTERCHANGE RECIPIENT Function: Identification of the recipient of the interchange. 0010 Interchange recipient Identification M 1 an..35 0007 Identification code qualifier C 1 an..4 0014 Interchange recipient internal identification C 1 an..35 0046 Interchange recipient internal sub-identification C 1 an..35 S018 SCENARIO IDENTIFICATION Function: To identify a scenario. 0127 Scenario identification M 1 an..14 0128 Scenario version number C 1 an..3 0130 Scenario release number C 1 an..3 0051 Controlling agency, coded C 1 an..3 S300 DATE AND/OR TIME OF INITIATION Function: Date and/or time of event initiation. 0338 Event date C 1 n.8 0314 Event time C 1 an..15 0336 Time offset C 1 n4 S301 STATUS OF THE TRANSFER - INTERACTIVE Function: Identifies the sequence of the message/package within the sender's interchange and the position in a multi-message and/or package transfer. 0320 Sender sequence number C 1 n..6 0323 Transfer position, coded C 1 a1 0325 Duplicate indicator C 1 a1

Page 127: Ssim Impguide 03 1 Oct03

Appendix B – Composite Directory

ISSUE DATE: OCTOBER 2003 119

Tag Name Status Repetitions Format S302 DIALOGUE REFERENCE Function: Unique reference for the dialogue between co-operating parties within the interactive EDI transaction. 0300 Initiator control reference M 1 an..35 0303 Initiator reference identification C 1 an..35 0051 Controlling agency, coded C 1 an..3 0304 Responder control reference C 1 an..35 S303 TRANSACTION REFERENCE Function: Unique reference for the business transaction to which the dialogue belongs. 0306 Transaction control reference M 1 an..35 0303 Initiator reference identification C 1 an..35 0051 Controlling agency, coded C 1 an..3 S305 DIALOGUE IDENTIFICATION Function: Identification of the dialogue type being used for the interactive EDI transaction. 0311 Dialogue identification M 1 an..14 0342 Dialogue version number C 1 an..3 0344 Dialogue release number C 1 an..3 0051 Controlling agency, coded C 1 an..3 S306 INTERACTIVE MESSAGE IDENTIFIER Function: Identification of the type, version and details of the message being interchanged. 0065 Message type M 1 an..6 0052 Message version number M 1 an..3 0054 Message release number M 1 an..3 0113 Message type sub-function identification C 1 an..6 0051 Controlling agency, coded C 1 an..3 0057 Association assigned code C 1 an..6

Page 128: Ssim Impguide 03 1 Oct03

EDIFACT Implementation Guide – Scheduling Messages

ISSUE DATE: OCTOBER 2003 120

Intentionally left blank

Page 129: Ssim Impguide 03 1 Oct03

121

APPENDIX C – DATA ELEMENT DIRECTORY

Legend for Data Element Directory + Signifies addition of a data element. * Signifies change of a data element. ! Signifies change of a description for a data element.

TAG NAME and DESCRIPTION 0001 Syntax identifier Desc: Upper case Controlling Agency Repr.: a4 0002 Syntax version number Desc: Increments 1 for each new version Repr.: an1 0004 Interchange sender identification Desc: Code or name as specified in Interchange Agreement Repr.: an..35 0007 Identification code qualifier Desc: Used with interchange sender identification code. Repr.: an..4 0008 Interchange sender internal identification Desc: Identification (for example, a division, branch or computer system/process) specified by the sender of interchange, to be included if agreed, by the recipient in response interchanges, to facilitate internal routing. Repr.: an..35 0010 Interchange recipient Identification Desc: Code or name as specified in Interchange Agreement. Repr.: an..35 0014 Interchange recipient internal identification Desc: Identification (for example, a division, branch or computer system/process) specified by the recipient of interchange, to be included if agreed, by the sender in response interchanges, to facilitate internal routing. Repr.: an..35 0035 Test Indicator Desc: Set = 1 if the indicator is a test, otherwise not used. Repr.: n1 0036 Interchange Control Count Desc: The count of the number of messgaes in the interchange. Repr.: n..6 0042 Interchange sender internal sub-identification Desc: Sub-level of sender internal identification, when further sub-level identification is required. Repr.: an..35 0046 Interchange recipient internal sub-identification Desc: Sub-level of recipient internal identification, when further sub-level identification is required. Repr.: an..35 0051 Controlling agency, coded Desc: Code to identify the agency controlling the specification, maintenance and publication of the message type. Repr.: an..3

Page 130: Ssim Impguide 03 1 Oct03

EDIFACT Implementation Guide – Scheduling Messages

ISSUE DATE: OCTOBER 2003 122

TAG NAME and DESCRIPTION 0052 Message version number Desc: Version number of the message type. Repr.: an..3 0054 Message release number Desc: Release number within current version number. Repr.: an..3 0057 Association assigned code Desc: Code, assigned by the association responsible for the design and maintenance of the message type concerned, which further identifies the message. Repr.: an..6 0065 Message type Desc: Type of message being transmitted. Repr.: an..6 0074 Number of Segments in the Message Desc: Control count, including UIH and UIT Repr.: n..10 0080 Service code list directory version number Desc: Version number of the service code list directory. Repr.: an..6 0113 Message type sub-function identification Desc: Code identifying a sub-function of a message type. Repr.: an..6 0127 Scenario identification Desc: Code identifying scenario. Repr.: an..14 0128 Scenario version number Desc: Version number of a scenario. Repr.: an..3 0130 Scenario release number Desc: Release number within the scenario version number. Repr.: an..3 0133 Character encoding, coded Desc: Coded identification of the character encoding used in the interchange. Repr.: an..3 0300 Initiator control reference Desc: A reference assigned by the dialogue initiator. Repr.: an..35 0303 Initiator reference identification Desc: Organisation code or name assigned by the party that initiated the transaction or dialogue. Repr.: an..35 0304 Responder control reference Desc: If provided by the responder, shall be returned by the initiator throughout the dialogue Repr.: an..35 0306 Transaction control reference Desc: A reference assigned by the transaction initiator. Repr.: an..35

Page 131: Ssim Impguide 03 1 Oct03

Appendix C – Data Element Directory

ISSUE DATE: OCTOBER 2003 123

TAG NAME and DESCRIPTION 0311 Dialogue identification Desc: Code identifying a dialogue. Repr.: an..14 0314 Event time Desc: Time of event. Repr.: an..15 0320 Sender sequence number Desc: Identifies the sequence number of the message or package within the sender interchange. Repr.: n..6 0323 Transfer position, coded Desc: Indication of the position of a transfer. Repr.: a1 0325 Duplicate indicator Desc: Indication that the structure is a duplicate of a previously sent structure. Repr.: a1 0336 Time offset Desc: UTC (Universal Co-ordinated Time) offset from event time. Repr.: n4 0338 Event date Desc: Date of event. Repr.: n.8 0340 Interactive Message Reference Number Desc: A sender's unique message reference. Repr.: an..35 0342 Dialogue version number Desc: Version number of a dialogue. Repr.: an..3 0344 Dialogue release number Desc: Release number of a dialogue. Repr.: an..3 1131 Code list qualifier Desc: Identification of a code list. Repr.: an..3 1154 Reference Number Desc: Identification number the nature and function of which can be qualified by an entry in data element 1153 Reference qualifier. Repr.: an..35 1225 Message function, coded Desc: To indicate the type of action required (specific availability, schedules, book etc). Repr.: an..3 1229 Action Request/Notification, Coded Desc: Code specifying the action to be taken. Repr.: an..3 1245 Status Indicator, Coded Desc: Specification of a status or disposition. Repr.: an..3

Page 132: Ssim Impguide 03 1 Oct03

EDIFACT Implementation Guide – Scheduling Messages

ISSUE DATE: OCTOBER 2003 124

TAG NAME and DESCRIPTION 2002 Time Value Desc: To specify a time value. Repr.: n4 2005 Date/Time/Period qualifier Desc: Code giving specific meaning to a date, time or period. Repr.: an..3 2148 Date Variation Desc: Describes the relationship between Day(s)/Period of Operation and the Scheduled Time of vehicle Arrival in the same time mode.Variation is assumed to be positive. If negative, use minus sign (-)before the numeric. Repr.: n1 2379 Date/time/period format qualifier Desc: Specification of the representation of a date, a date and time or of a period. Repr.: an..3 2380 Date/time/period Desc: The value of a date, a date and time, a time or of a period in a specified representation. Repr.: an..35 3036 Party name Desc: Use the Industry assigned company designator code if one has not been assigned. Repr.: an..35 3055 Code list responsible agency, coded Desc: Code identifying the agency responsible for a code list. Repr.: an..3 3197 Agent identification Desc: A unique identification assigned to an agent. Repr.: an..9 3207 Country, coded Desc: Used to indicate the 2 letter ISO 3166 Country code. Repr.: an..3 3223 Related place/location one identification Desc: Specification of the first related place/location by code. Repr.: an..25 3224 Place/Location Desc: Used only when a code does not exist. Repr.: an..70 3225 Place/Location identification Desc: To indicate the location of the delivering system/originator of the request. Repr.: an..25 3227 Place/Location qualifier Desc: Code identifying the function of a location. Repr.: an..3 3229 Country Sub-entity Identification Desc: Identification of the name of sub-entities (state, province) defined by appropriate governmental agencies. Repr.: an..9

Page 133: Ssim Impguide 03 1 Oct03

Appendix C – Data Element Directory

ISSUE DATE: OCTOBER 2003 125

TAG NAME and DESCRIPTION 3453 Language, coded Desc: Use ISO 639-1988. Repr.: an..3 3457 Originator Type Coded Desc: To describe the type of originator. Repr.: an..3 3465 In-house identification Desc: A unique locally assigned identification. Repr.: an..9 3503 Originators Authority Identification Desc: Authority code of the requestor Repr.: an..9 4009 Option, coded Desc: Coded specification of an option. Repr.: an..3 4018 Associated option information Desc: To specify information related to a selected option. Repr.: an..35 4025 Business function, coded Desc: To indicate the type of business action (Airline, Hotel, Car, Tour,Rail, Cruise, Ferry). Repr.: an..3 4343 Response Type, Coded Desc: To indicate the type of acknowledgement or action taken in response. Repr.: an..3 4405 Status, coded Desc: Code indicating the relative standing, condition or position. Repr.: an..3 4440 Free text Desc: Free text field available to the message sender for information. Repr.: an..70 4451 Text Subject Qualifier Desc: To indicate coded or literal free text information. Repr.: an..3 4473 Information type identification Desc: To specify type of text information such as fare, ticketing, phone,flifo, etc. Repr.: an..4 4510 Requested information Desc: Availability status alpha or numeric. Repr.: an..3 5245 Percentage qualifier Desc: Identification of the usage of a percentage. Repr.: an..3 5482 Percentage Desc: Value expressed as a percentage of a specified amount. Repr.: n..8

Page 134: Ssim Impguide 03 1 Oct03

EDIFACT Implementation Guide – Scheduling Messages

ISSUE DATE: OCTOBER 2003 126

TAG NAME and DESCRIPTION 6060 Quantity Desc: Numeric value of a quantity. Repr.: n..15 6071 Frequency Qualifier Desc: Indicates that the service operates at regular, but less than weekly intervals. Repr.: an..3 6072 Frequency Value Desc: Day(s) of the week of the opertion of the first stage of the service. Repr.: n..9 6345 Currency, coded Desc: ISO Currency code for payment of a ticket Repr.: an..3 6350 Number of Units Desc: Number of units of a certain type Repr.: n..15 6353 Number of Units, qualifier Desc: Indication of the objective of number of units information. Repr.: an..3 6411 Measure unit qualifier Desc: Indication of the unit of measurement in which weight (mass), capacity, length, area, volume or other quantity is expressed. Note: See UN/ECE recommendation 20. Repr.: an..3 7008 Item Description Desc: Plain language description of articles or products. Repr.: an..35 7009 Item Description Identification Desc: Code from an industry code list which provides specific data about a product characteristic. Repr.: an..7 7037 Characteristic Identification Desc: A code from an industry code list which provides specific data about a product characteristic. Repr.: an..17 7077 Item Description Type, Coded Desc: Code indicating the format of a description. Repr.: an..3 7081 Item Characteristic, Coded Desc: Code specifying the item characteristic being described. Repr.: an..3 7133 Product Details Qualifier Desc: Indicates type of product details being specified. Repr.: an..3 7135 Product Identification Desc: To indicate service number, Repr.: an..35 7139 Product Identification Characteristic Desc: A suffix to the vehicle type code used for operational purposes only. Repr.: an..3

Page 135: Ssim Impguide 03 1 Oct03

Appendix C – Data Element Directory

ISSUE DATE: OCTOBER 2003 127

TAG NAME and DESCRIPTION 7161 Special Services, coded Desc: 1-3 meal types per RBD/physical compartment Repr.: an..3 7383 Surface/Layer Indicator, Coded Desc: Code indicating the surface or layer of a product that is being described. Repr.: an..3 8015 Traffic Restriction, coded Desc: To specify a traffic restriction for traffic. Repr.: an..3 8017 Traffic Restriction Type, coded Desc: To indicate how the restriction applies to traffic. Repr.: an..3 8035 Traffic Restriction Type Qualifier, coded Desc: To qualify the type of traffic restriction. Repr.: an..3 8051 Transport Stage Qualifier Desc: Qualifier giving a specific meaning to the transport details. Repr.: an..3 8066 Mode of Transport Desc: Method of transport used. Repr.: an..17 8067 Mode of Transport, coded Desc: Coded method of transport used. Repr.: an..3 8179 Type of means of transport identification Desc: Code defining the type of the means of transport being utilised. Repr.: an..8 8212 Identification of the means of transport Desc: Name or number identifying a vessel or a vehicle. Use vessel or vehicle registration as assigned by the appropriate licensingauthority.. Repr.: an..17 8260 Equipment Identification Number Desc: To indicate an equipment type override which specifies analphanumeric string of characters to be used in place of the Typeof means of transport identification. Repr.: an..17 8335 Movement Type, coded Desc: Code indicating the type of movement. Repr.: an..3 9011 Status event, coded Desc: Code identifying a status event. Repr.: an..3 9013 Status reason, coded Desc: Code identifying the reason for a status. Repr.: an..3 9015 Status type, coded Desc: Code identifying the type of status event. Repr.: an..3 9038 Facility description text Desc: Free form description of type of special facilities. Repr.: an..70

Page 136: Ssim Impguide 03 1 Oct03

EDIFACT Implementation Guide – Scheduling Messages

ISSUE DATE: OCTOBER 2003 128

TAG NAME and DESCRIPTION 9039 Facility type, coded Desc: To indicate a product facility (no smoking/telephone/ski rack/in room coffee). Repr.: an..3 9321 Application error, coded Desc: The code assigned by the receiver of a message to the identification of a data validation error condition. Repr.: an..8 9417 Government Action, Coded Desc: To indicate type of government action such as inspection, detention, fumigation, security. Repr.: an..3 9906 Company Identification Desc: The coded description of supplier of a service or product, i.e.airline designator code Repr.: an..35 9916 First Date Desc: A date that applies to a means of transport or a traveller. Repr.: an..35 9918 First Time Desc: A time that applies to a means of transport or a traveller. Repr.: n..4 9922 Second Time Desc: An additional time that applies to a means of transport or a traveller. Repr.: n..4 9930 Traffic Restriction, coded Desc: Indicates that certain restrictions apply to the carriage ofpassengers, cargo and/or mail. Repr.: an..3 9966 Traffic Restriction Qualifier, coded Desc: A code to indicate where the stopover must occur on a means or transport. Repr.: an..3 9968 Traffic Restriction Type, coded Desc: A code to indicate how the restriction applies to the means of transport. Repr.: an..3 9982 Restricted Payload Desc: Specifies total payload when it is restricted below standard, ifapplicable. Repr.: an..17 9984 Type of Call at Port Desc: To specify information which affects handling of an arrival or departure at a port, by code. Repr.: n..3 9986 UTC/Local Time Variation Desc: Specifies a UTC/Local Time Variation where the originator wishes to override a UTC/Local Time Variation held in the recipient’ssystem. Variation is assumed to be positive. If negative, use minussign (-) before the four numerics. Repr.: n4 9988 Data indicator Desc: An indicator to describe a specific item. Repr.: an..3 9989 Data type, coded Desc: To identify the type of data. Repr.: an..3

Page 137: Ssim Impguide 03 1 Oct03

129

APPENDIX D – CODE SET DIRECTORY

Legend for Code Set Directory + Signifies addition of a code set or code value * Signifies change of a code set or to a code value. ! Signifies change of a description for a code value or note. # Code value marked for subsequent deletion

0001 Syntax identifier UNOA UN/ECE character set level A

0007 Identification code qualifier 04 IATA

0051 Controlling agency, coded IA IATA UN UN/ECE

0325 Duplicate indicator D Duplicate interchange/message

1225 Message function, coded 1 Cancellation - to basic schedule 4 Partial schedule update — to basic schedule 13 Request for a repeat of schedule information 18 Complete new schedule information - basic schedule 42 Event, non-flight movement related 82 Flight information movement function 83 Flight information diversion function A4 Partial schedule update - ad hoc changes/additions/deletions to schedule F18 Complete new schedule information for a flight number range - basic schedule S01 MCT Query S02 MCT Complete Database Replacement S03 MCT Complete Replacement for a single airport as defined in the ODI segment S04 MCT Add detail item S05 MCT Change detail item S06 MCT Delete detail item S07 MCT Replace all detail items at the airport defined in the ODI segment for the carrier defined in the ARR/DEP" segment SAL Slot Preliminary Allocation List SAQ Slot/Schedule Availability Query SCR Slot Clearance Request/Reply SHL Slot Historical and Non-Historical Allocation List SIE Slot/Schedule Information Enquiry SIR Slot/Schedule Information Request/Reply SMA Schedule Movement Advice WCR Waitlist Change Request/Reply WIE Waitlist Information Enquiry WIR Waitlist Information Request/Reply

Page 138: Ssim Impguide 03 1 Oct03

EDIFACT Implementation Guide – Scheduling Messages

ISSUE DATE: OCTOBER 2003 130

1229 Action Request/Notification, Coded AO Acceptance of an offer – no further improvement desired CH Schedule to be changed, or Waitlist to be changed when used with Message Function code WCR DS Delete schedule ES Eliminate schedule FS Historic schedule HH Holding IN Revised Schedule (Continuation from previous adjacent Season), or Availability Information when used

with Message Function code SAQ KK Confirmation LS Revised schedule (No offer acceptable) NE New Entrant status as stated in the EU Regulation 95/93 Art 2 b ii or as covered in local legislation that will have precedence NS New schedule, or new Waitlist request when used with Message Function code WCR NY New Entrant with year round status as stated in the EU Regulation 95/93 Art 2 b ii or as covered in local legislation that will have precedence OO Offer PP If used by Operator, means acceptance of an offer with request to remain on waitlist; if used by Coordinator, means pending QA Request for arrival schedule information QD Request for departure schedule information QS Request for schedule information RS Revised schedule (Offer acceptable), or revised Waitlist request when used with Message Function code WCR TS Allocated subject to conditions UU Refusal WW Unable to reconcile flight information XX Cancellation YY New schedule (Continuation from previous adjacent Season) ZZ Decline offer, or remove from Waitlist when used with Message Function code WCR

1245 Status Indicator, Coded 2 Cancellation 3 Created new 5 Replacement A Arrival D Departure N Not authorized to load AA Actual Arrival — Movement AD Actual Departure — Movement EA Estimated Arrival — Movement EB Estimated On Block — Movement ED Estimated Departure — Movement HE Hold exists on this flight NI Next Info Departure — Movement PA Free seating PB Name check-in PD Numeric check-in SA Flight open for check-in SB Flight temporarily closed SC Flight closed for check-in SD Flight closed for finalizing (flight initial close) SE Flight held SK Flight open for through check-in SL Flight boarding

Page 139: Ssim Impguide 03 1 Oct03

Appendix D – Code Set Directory

ISSUE DATE: OCTOBER 2003 131

SM Flight deboarding SN Flight closed for through check-in SO Flight cancelled TL Technical Landing 2DV Cancellation — leg diverted 2RR Cancellation — leg rerouted ADM Change of administration information AW2 Cancellation with ASM Withdrawal Indicator AW3 New information with ASM Withdrawal Indicator AW5 Replacement with ASM Withdrawal Indicator CKG Check-in restricted to gate VDT CON Change of aircraft configuration version DIV Flight / Leg diverted EEE EMERGENCY Lock EQT Change of equipment information NON Check-in mode NON NTA Transfer check-in not allowed to airline this city or from this airlines flights departing at this city NTF Transfer check-in not allowed to flight this city or from this flight departing at this city PGM Passenger gender mandatory PNM Check-in mode PNM RFA Return from Airborne — Movement RIN Flight reinstated RRT Flight rerouted RST Return to Stand / Ramp — Movement SEI All flights into this city held SEO All flights out of this city held SER Reject when flight held SES Standby when flight held TIM Change of time information

Page 140: Ssim Impguide 03 1 Oct03

EDIFACT Implementation Guide – Scheduling Messages

ISSUE DATE: OCTOBER 2003 132

2005 Date/Time/Period qualifier D Discontinue date E Effective date L Local Time Mode U UTC Time Mode AA Cleared Time - arrival AD Cleared Time - departure DV Daylight Saving Time (DST) Variation FA Timing Flexibility Identifier - arrival FD Timing Flexibility Identifier - departure RA Requested Time - arrival RD Requested Time - departure SV Standard Time Variation ACL Actual time in local ACT Actual time COR Corrected COT Confirmed time ENL End time, in local ENT End time ESL Estimated time, in local EST Estimated time HOL Holding time ISK Informative schedule time ISL Informative schedule time, in local MCT Minimum connect time NIL Next Info time, in local NIT Next Info time PRE Preannounced time REM Removed REV Revised STL Start time, in local STT Start time

3224 Place/Location AFR Africa (IATA TC2) CAR Caribbean (IATA TC1) CEM Central America (IATA TC1) EUR Europe (IATA TC2) JAK Japan/ Korea (IATA TC3) MDE Middle East (IATA TC2 NOA North America (IATA TC1) SAS South Asian Subcontinent (IATA TC3) SCH Schengen Agreement SEA South East Asia (IATA TC3) SOA South America (IATA TC1) SWP South West Pacific (IATA TC3) WRI Wright Amendment

Page 141: Ssim Impguide 03 1 Oct03

Appendix D – Code Set Directory

ISSUE DATE: OCTOBER 2003 133

4009 Option, coded CUR Current data DLG Dead leg data — Legs removed by diversion or rerouting message HIS Historical data — not valid any more SKD Schedule data

4025 Business function, coded 1 Air

4343 Response Type, Coded 03 Successfully processed 06 Partially processed 07 Received but not processed 08 Received and rejected

4405 Status, coded K Confirmed, Effective, Working, Firm, etc. P Provisional, Draft, Proposed, Subject to change, etc.

4451 Text Subject Qualifier APT Airport related information CAT Catering information CHG Change information CKI Check-in IFC Interface information NAM Name OPS Operations information PRD Product information SAF Safety information SIM IATA SSIM defined information SPH Special handling STN Statutory notice TFI Timing flexibility information TRA Transportation information VEH Vehicle related information WAB Weight and balance information ZZZ Mutually defined

Page 142: Ssim Impguide 03 1 Oct03

EDIFACT Implementation Guide – Scheduling Messages

ISSUE DATE: OCTOBER 2003 134

4473 Information type identification AC Aircraft information BD Minimum Connecting Time International/ Domestic Status Override - Domestic at Board Point BI Minimum Connecting Time International/ Domestic Status Override - International at Board Point BN Boarding number EN Not Electronic Ticketing Candidate ER Electronic Ticketing Required ET Electronic Ticketing Candidate OD Domestic at Off Point OI International at Off Point RN Redirection Not Required RR Requires Redirection SV Check-in supervisory agent id TA Traffic area WB Accepted Baggage Weight in kg WN Weight Table Number in kg WT Accepted Weight in kg 101 Passenger Terminal Segment Override - Arrival 102 Passenger Terminal Segment Override - Departure AHS Arrival high security flight CCV Check in control VDT CFT Calculated flying time CTL Operations control unit DHS Departure high security flight ISD In-Flight Service Information default MCA Row after movable class divider MCB Row before movable class divider MCD Movable class divider used PVD Protective cover VDT RAR Request all Reservations RAR Request All Reservations RCP Recipient RMK Remark SFT Scheduled flying time SHB Handle as complete package SHS Handle as swap SHW Handle as waitlist TRG Trigger TSG Subject to Government Approval WCB Accepted Cabin Weight in kg WCL Check-in Weight Limit in kg WSB Stand-by Baggage Weight in kg

5245 Percentage qualifier N No information available O 1 percent accuracy T 10 percent accuracy U Undetermined

Page 143: Ssim Impguide 03 1 Oct03

Appendix D – Code Set Directory

ISSUE DATE: OCTOBER 2003 135

6353 Number of Units, qualifier PX Number of seats occupied by passengers on board

6411 Measure unit qualifier ACV Physical configuration (ACV) PRB Data related to Reservations classes (PRBD)

7077 Item Description Type, Coded N Narrow body aircraft (single aisle) W Wide body aircraft (twin aisle)

7133 Product Details Qualifier 1 Reservations classes (Passenger Reservations Booking Designator - PRBD) 2 Physical configuration (Aircraft Configuration/ Version - ACV) 3 Blocked Seats and/or Unit Load Devices CN Class Nesting CS Physical configuration modified by convertible seats DD Domestic to Domestic connection DI Domestic to International connection IA Inter-Airport connection ID International to Domestic connection II International to International connection MCD Physical configuration modified by movable class divider

8017 Traffic Restriction Type, coded 1 Traffic Restriction Applicable to Passengers Only 2 Traffic Restriction Applicable to Cargo/Mail Only 3 Traffic Restriction Applicable to Cargo Only 4 Traffic Restriction Applicable to Mail Only

8035 Traffic Restriction Type Qualifier, coded 1 Traffic Restriction Code Qualifier at Board Point 2 Traffic Restriction Code Qualifier at Off Point 3 Traffic Restriction Code Qualifier at Board and Off Points

8051 Transport Stage Qualifier A Partnership Specification D Duplicate Leg Cross Reference - Duplicate Leg Identification F Flight Number Override L Code Sharing - Commercial Duplicate O Duplicate Leg Cross Reference - Operational Leg Identification P Joint Operation Airline Designators (Participating carriers) R Joint Operation Airline Designators (Reservations control carrier) S Code Sharing - Shared Airline Designation or Wet Lease Airline Designation

8335 Movement Type, coded BD Boarding CK Check in DIV Diversion GMV Ground Movement OFB Off Blocks OFS Off stand ONB On Blocks ONS On stand RCL Reclearance information

Page 144: Ssim Impguide 03 1 Oct03

EDIFACT Implementation Guide – Scheduling Messages

ISSUE DATE: OCTOBER 2003 136

RFA Return from airborne RST Return to stand TDN Touch down TDP 10 minutes before departure TEN 10 minutes out THM 30 Minutes out TKO Take Off

9011 Status event, coded BD Boarded CK Checked in DB Deboarded DN Denied boarding NC Not checked in OF Offloaded OK Confirmed Booking SA Space Available SB Standby WL Waitlist Booking ALL Allocated AVA Available DIS Disembarking EMB Embarking EST Estimated / Forecasted EXS Extra Seats MAX Maximum MIN Minimum SPS Space Protected Seats TFB Transfer Booked TFC Transfer Checked in TRS Transit

9013 Status reason, coded AA Apron capacity AB ATC Restriction CF Curfew GA Gate capacity HA High security flight restriction MU Misuse of slots NA Night allocation NB Noise ban NE New Entrant status under the provisions of the EU Regulation 95/93 Art 2 b ii or as covered in local legislation that will have precedence NP No recognizable period PA Post SCC coordination for ad hoc QT Quota limitations RA Runway congestion TA Terminal congestion UA Unable to allocate slot for miscellaneous reason

Page 145: Ssim Impguide 03 1 Oct03

Appendix D – Code Set Directory

ISSUE DATE: OCTOBER 2003 137

N80 Failure to use slots on at least 80% of occasions R05 Runway 5 minute limitation R10 Runway 10 minute limitation R15 Runway 15 minute limitation R30 Runway 30 minute limitation R60 Runway 60 minute limitation SEC Security T10 Terminal congestion 10 minutes T15 Terminal congestion 15 minutes T2H Terminal congestion 2 hours T30 Terminal congestion 30 minutes T3H Terminal congestion 3 hours T60 Terminal congestion 60 minutes

9039 Facility type, coded 1 Movie 2 Telephone 3 Telex 4 Audio programming 5 Television 6 Reservation booking service 7 Duty Free sales 8 Smoking 9 Non smoking 10 Short Feature Video 11 No Duty Free sales 12 In-seat power source 13 Internet access 14 E-mail 15 In-seat Video Player/Library AHA Aircraft handling agent BBT Baggage belt CCT Check-in counter CON Concourse EXI Passenger exit FHA Freight handling agent GTE Gate PHA Passenger handling agent POS Aircraft position RWY Runway TWY Taxiway

9321 Application error, coded 1 Invalid date 2 Invalid time 3 Invalid transfer sequence 4 Invalid City/Airport code 5 Invalid time mode 6 Invalid operational suffix 7 Invalid period of schedule validity 8 Invalid days of operation 9 Invalid frequency rate 10 Invalid service type code 11 Invalid aircraft type coded 12 Invalid product details qualifier coded

Page 146: Ssim Impguide 03 1 Oct03

EDIFACT Implementation Guide – Scheduling Messages

ISSUE DATE: OCTOBER 2003 138

13 Invalid aircraft configuration/version coded 14 Invalid meal service note coded 15 Invalid utc/local time variation 16 Invalid date variation 17 Invalid terminal coded 18 Invalid on-time performance indicator 19 Invalid type of call at port coded 20 Invalid Government action coded 21 Invalid facility type coded 22 Invalid Traffic Restriction coded 23 Invalid Traffic Restriction type coded 24 Invalid Traffic Restriction qualifier coded 25 Invalid transport stage qualifier coded 100 Invalid place of departure coded 101 Invalid place of destination coded 102 Invalid departure date 103 Invalid departure time 104 Invalid reservations booking designator 105 Invalid reservations booking modifier 107 Invalid airline designator 109 Invalid country code 112 Invalid requester identification 113 Invalid period of operation 114 Invalid flight number 115 Invalid arrival date 116 Invalid arrival time 120 Invalid action code 154 Message function invalid 156 Business function invalid 408 No more data available 409 Request is outside system data range 410 Flight does not operate due to weather, mechanical or other operational conditions 417 Repeat request updating in progress 900 Inactivity time out value exceeded 901 Communications line unavailable 902 Prior message being processed

9984 Type of Call at Port 1 Technical Landing 2 Flaglanding 3 Plane Change without Aircraft Type Change 5 Onward Flight 6 Passenger Check-In

9988 Data indicator QQQ Total numbers without specification of reasons, classes, etc

Page 147: Ssim Impguide 03 1 Oct03

Appendix D – Code Set Directory

ISSUE DATE: OCTOBER 2003 139

9989 Data type, coded OD Origin — Destination UM Unaccompanied minors WC Wheelchairs ANI Animals BAG Bags CHD Child passenger CSH Passenger of code share partner DEL Delay (departure) reason DIV Diversion reason FEM Female passenger INF Infants JMP Jump Seats MAL Male passenger OCC Other occupants OWN Passenger of operating carrier PAD Passenger available for disembarkment PET Pets in cabin STR Stretchers TOT Total


Recommended