PRODUCT DATASHEET Pompe Dosatrici – Metering Pumps UNI EN ISO 9001: 2008 – 9190.ETAD MOTOR DRIVEN DIPHRAGM DOSING PUMP series – type ST-D We reserve the right to make changes at any time without notice to colors, materials, specifications and models Etatron DS SpA – Head Office Via dei Ranuncoli, 53 – 00134 loc. Santa Palomba – ROMA – ITALY Phone: +39 06 9349891 – Fax: +39 06 9343924 e-mail: [email protected]– web: www.etatronds.com TECHNICAL FEATURES • Maximum Flow rate: up to 123 l/h at 50Hz up to 148 l/h at 60Hz • Maximum pressure: up to 14 bar • Power supply range: 230-400 three phase 50Hz (*) 275-480 three phase 60Hz (*) • Motor: 0.18 kW • Stroke rate: from 60 to 120 strokes/min at 50Hz from 72 to 144 strokes/min at 60Hz • Pump head: PP, PVC, SS316 or PVDF • Valves: Ceramic or SS316 balls • Valve Seals FPM, EPDM or NBR • Valve seats PVC or PVDF • Diaphragm: PTFE • External casing: Die-cast aluminum housing protected by epoxy/anti-acid paint • Protection: IP55 • Isolation Class: F • Connections: ½”Gm • Installation Kit: Not included (*) Upon request: different configurations. The Diaphragm Motor Driven Dosing Pump is a manual adjustment pump from 10% to 100%. There are three standard versions: 1- “CA”: which has a PP pump head – PTFE diaphragm – single ceramic ball check valves with FPM seals - PVC valve seats. 2- “BA”: which has a PVC pump head – PTFE diaphragm – single ceramic ball check valves with FPM seals - PVC valve seats. 3- “AA”: which has a SS316L pump head - PTFE diaphragm – single SS316L ball check valves with NBR seals - PVDF valve seats.
Transcript
PRODUCT DATASHEET
Pompe Dosatrici – Metering Pumps UNI EN ISO 9001: 2008 – 9190.ETAD
MOTOR DRIVEN DIPHRAGM DOSING PUMP series – type ST-D
We reserve the right to make changes at any time without notice to colors, materials, specifications and models
Etatron DS SpA – Head Office
Via dei Ranuncoli, 53 – 00134 loc. Santa Palomba – ROMA – ITALY Phone: +39 06 9349891 – Fax: +39 06 9343924
Inverter for panel mounting, 4-20mA input, 230V 50Hz single-phase power supply,
three-phase output. To be used with a self-ventilated motor pump.
TANKS
Polyethylene Tank – from 60L and on – upon request could be complete with PE Open
Safety Bund, PP Tank Support for dosing pump and/or mixer, outlet Cleaning Valve and
else.
MIXERS
Fast or Slow Mixers, from 60cm to 150cm, shaft and impeller in stainless steel
or PP covering a steel core (different materials are available upon request).
Available also Manual Mixers in PVC, 60 or 80cm.
EE XX AA MM PP LL EE SS OO FF CC OO MM PP LL EE TT EE DD OO SS II NN GG SS YY SS TT EE MM SS Composed of: Dosing Pump, Mixer, Tank complete with Tank Support, foot valve and else.
PRODUCT DATASHEET
Pompe Dosatrici – Metering Pumps UNI EN ISO 9001: 2008 – 9190.ETAD
MOTOR DRIVEN DIPHRAGM DOSING PUMP series – type ST-D
We reserve the right to make changes at any time without notice to colors, materials, specifications and models
Etatron DS SpA – Head Office
Via dei Ranuncoli, 53 – 00134 loc. Santa Palomba – ROMA – ITALY Phone: +39 06 9349891 – Fax: +39 06 9343924
